Wellfleet-OC3-MIB

File: Wellfleet-OC3-MIB.mib (3744 bytes)

Imported modules

RFC-1212 RFC1213-MIB Wellfleet-COMMON-MIB

Imported symbols

OBJECT-TYPE DisplayString wfSonetGroup

Defined Types

WfOc3ConfigEntry  
SEQUENCE    
  wfOc3ConfigDelete INTEGER
  wfOc3ConfigIndex INTEGER
  wfOc3ConfigType INTEGER
  wfOc3ConfigTimeElapsed INTEGER
  wfOc3ConfigValidIntervals INTEGER
  wfOc3ConfigLineCoding INTEGER
  wfOc3ConfigLineType INTEGER
  wfOc3ConfigCircuitIdentifier DisplayString

Defined Values

wfOc3ConfigTable 1.3.6.1.4.1.18.3.4.24.12
Statistics for the SONET medium table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfOc3ConfigEntry

wfOc3ConfigEntry 1.3.6.1.4.1.18.3.4.24.12.1
An entry in the medium table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfOc3ConfigEntry  

wfOc3ConfigDelete 1.3.6.1.4.1.18.3.4.24.12.1.1
Create/Delete parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfOc3ConfigIndex 1.3.6.1.4.1.18.3.4.24.12.1.2
Index for this physical Sonet interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfOc3ConfigType 1.3.6.1.4.1.18.3.4.24.12.1.3
This variable identifies whether a SONET or a SDH signal is used across this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfOc3ConfigTimeElapsed 1.3.6.1.4.1.18.3.4.24.12.1.4
The number of seconds that have elapsed since the beginning of the current error-measurement period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfOc3ConfigValidIntervals 1.3.6.1.4.1.18.3.4.24.12.1.5
The number of previous intervals for which valid data has been stored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfOc3ConfigLineCoding 1.3.6.1.4.1.18.3.4.24.12.1.6
This variable describes the line coding for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), b3zs(2), cmi(3), nrz(4), rz(5)  

wfOc3ConfigLineType 1.3.6.1.4.1.18.3.4.24.12.1.7
This variable describes the line type for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), shortsinglemode(2), longsinglemode(3), multimode(4), coax(5), utp(6)  

wfOc3ConfigCircuitIdentifier 1.3.6.1.4.1.18.3.4.24.12.1.8
This variable contains the transmission vendor's circuit identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString