Wellfleet-DSQMS-MIB

File: Wellfleet-DSQMS-MIB.mib (27972 bytes)

Imported modules

RFC1155-SMI

RFC-1212

Wellfleet-COMMON-MIB

Imported symbols

Counter

OBJECT-TYPE

wfDsqmsGroup

Defined Types

WfDsqmsIfEntry
SEQUENCE
	wfDsqmsIfCreate	INTEGER
	wfDsqmsIfEnable	INTEGER
	wfDsqmsIfState	INTEGER
	wfDsqmsIfLineNumber	INTEGER
	wfDsqmsIfRestart	INTEGER
	wfDsqmsIfTotalNumQueues	INTEGER
	wfDsqmsIfNumPQueues	INTEGER
	wfDsqmsIfNumWQueues	INTEGER
	wfDsqmsIfNumPQInUse	INTEGER
	wfDsqmsIfNumWQInUse	INTEGER
	wfDsqmsIfDebugLevel	INTEGER
	wfDsqmsIfBestEffortQueueId	INTEGER
	wfDsqmsIfPacketCount	INTEGER
	wfDsqmsIfByteCount	INTEGER
	wfDsqmsIfXmitPkts	Counter
	wfDsqmsIfXmitBytes	Counter
	wfDsqmsIfDroppedPkts	Counter
	wfDsqmsIfDroppedBytes	Counter
	wfDsqmsIfDequeueAtLineRate	INTEGER

WfDsqmsIfQueueEntry
SEQUENCE
	wfDsqmsIfQueueCreate	INTEGER
	wfDsqmsIfQueueEnable	INTEGER
	wfDsqmsIfQueueState	INTEGER
	wfDsqmsIfQueueLineNumber	INTEGER
	wfDsqmsIfQueueId	INTEGER
	wfDsqmsIfQueueType	INTEGER
	wfDsqmsIfQueueBestEffort	INTEGER
	wfDsqmsIfQueuePrioLevel	INTEGER
	wfDsqmsIfQueuePrioTimeQuantum	INTEGER
	wfDsqmsIfQueueCfgPktLimit	INTEGER
	wfDsqmsIfQueuePktLimit	INTEGER
	wfDsqmsIfQueueByteLimit	INTEGER
	wfDsqmsIfQueueCfgWeight	INTEGER
	wfDsqmsIfQueueWeight	INTEGER
	wfDsqmsIfQueueQuantum	INTEGER
	wfDsqmsIfQueueFlowFairnessEnable	INTEGER
	wfDsqmsIfQueueJitterConst	INTEGER
	wfDsqmsIfQueueBucketQuantum	INTEGER
	wfDsqmsIfQueueDropType	INTEGER
	wfDsqmsIfQueuePktCount	INTEGER
	wfDsqmsIfQueueByteCount	INTEGER
	wfDsqmsIfQueueXmitPkts	Counter
	wfDsqmsIfQueueXmitBytes	Counter
	wfDsqmsIfQueueDroppedPkts	Counter
	wfDsqmsIfQueueDroppedBytes	Counter
	wfDsqmsIfQueueRedEwqaGain	INTEGER
	wfDsqmsIfQueueRedIdleLossRate	INTEGER

WfDsqmsIfClassifierEntry
SEQUENCE
	wfDsqmsIfClassifierCreate	INTEGER
	wfDsqmsIfClassifierLineNumber	INTEGER
	wfDsqmsIfClassifierDSCP	INTEGER
	wfDsqmsIfClassifierQueueId	INTEGER
	wfDsqmsIfClassifierRedId	INTEGER

WfDsqmsRedEntry
SEQUENCE
	wfDsqmsRedCreate	INTEGER
	wfDsqmsRedId	INTEGER
	wfDsqmsRedCfgStatus	INTEGER
	wfDsqmsRed2ndOrderConst	INTEGER
	wfDsqmsRed1stOrderConst	INTEGER
	wfDsqmsRedMinTh	INTEGER
	wfDsqmsRedMaxTh	INTEGER

Defined Values

wfDsqmsIfTable		1.3.6.1.4.1.18.3.5.1.16.1
Table of DSQMS (DiffServ Queue Management and Scheduler) interfaces.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfDsqmsIfEntry

wfDsqmsIfEntry		1.3.6.1.4.1.18.3.5.1.16.1.1
DSQMS interface table entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfDsqmsIfEntry

wfDsqmsIfCreate		1.3.6.1.4.1.18.3.5.1.16.1.1.1
Create/Delete parameter. Default is created.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	created(1), deleted(2)

wfDsqmsIfEnable		1.3.6.1.4.1.18.3.5.1.16.1.1.2
Enable/Disable parameter. Default is enabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

wfDsqmsIfState		1.3.6.1.4.1.18.3.5.1.16.1.1.3
Current state of DSQMS on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), init(3), holddown(4), notpres(5)

wfDsqmsIfLineNumber		1.3.6.1.4.1.18.3.5.1.16.1.1.4
Identifies the instance for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfRestart		1.3.6.1.4.1.18.3.5.1.16.1.1.5
Setting this attribute to a 'set(1)' will cause immediate updating of wfDsqmsIfQueueEntry MIB on the same line number. Once activated, this attribute should be reset to 'notset(2)' to allow subsequent activations.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	set(1), notset(2)

wfDsqmsIfTotalNumQueues		1.3.6.1.4.1.18.3.5.1.16.1.1.6
The total number of queues configured for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

wfDsqmsIfNumPQueues		1.3.6.1.4.1.18.3.5.1.16.1.1.7
Number of priority queues configued for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

wfDsqmsIfNumWQueues		1.3.6.1.4.1.18.3.5.1.16.1.1.8
Number of weighted queues configued for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

wfDsqmsIfNumPQInUse		1.3.6.1.4.1.18.3.5.1.16.1.1.9
Number of priority queues that are currently in use for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

wfDsqmsIfNumWQInUse		1.3.6.1.4.1.18.3.5.1.16.1.1.10
Number of weighted queues that are currently in use for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

wfDsqmsIfDebugLevel		1.3.6.1.4.1.18.3.5.1.16.1.1.11
Indicates the level of debug. none - default. No debug information is displayed trace - displaying related DSQMS function names detailed - in additional to log messages of 'high' level, some environment variables, queue info will be logged. Note: DO NOT set to 'trace' or 'detailed' debug level in operational environment as it will likely flood the logging facility. This attribute is reserved for specialized debugging in a controlled lab environment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), trace(2), detailed(3)

wfDsqmsIfBestEffortQueueId		1.3.6.1.4.1.18.3.5.1.16.1.1.12
The Queue Id that is selected for best effort traffic for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

wfDsqmsIfPacketCount		1.3.6.1.4.1.18.3.5.1.16.1.1.13
Number of currently queued packets in DSQMS module on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfByteCount		1.3.6.1.4.1.18.3.5.1.16.1.1.14
Number of currently queued bytes in DSQMS module on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfXmitPkts		1.3.6.1.4.1.18.3.5.1.16.1.1.15
Number of xmitted packets from DSQMS module on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfXmitBytes		1.3.6.1.4.1.18.3.5.1.16.1.1.16
Number of xmitted bytes from DSQMS module on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfDroppedPkts		1.3.6.1.4.1.18.3.5.1.16.1.1.17
Number of dropped packets from DSQMS module on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfDroppedBytes		1.3.6.1.4.1.18.3.5.1.16.1.1.18
Number of dropped bytes from DSQMS module on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfDequeueAtLineRate		1.3.6.1.4.1.18.3.5.1.16.1.1.19
Determines whether the dequeuing from the queues is to be done at the line rate instead of the conventional technique or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

wfDsqmsIfQueueTable		1.3.6.1.4.1.18.3.5.1.16.2
Table of DSQMS (DiffServ Queue Management and Scheduler) queues.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfDsqmsIfQueueEntry

wfDsqmsIfQueueEntry		1.3.6.1.4.1.18.3.5.1.16.2.1
DSQMS queue table entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfDsqmsIfQueueEntry

wfDsqmsIfQueueCreate		1.3.6.1.4.1.18.3.5.1.16.2.1.1
Create/Delete parameter. Default is created.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	created(1), deleted(2)

wfDsqmsIfQueueEnable		1.3.6.1.4.1.18.3.5.1.16.2.1.2
Enable/Disable parameter. Default is disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

wfDsqmsIfQueueState		1.3.6.1.4.1.18.3.5.1.16.2.1.3
Indicate whether the particular queue is operational.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2), init(3), invalid(4)

wfDsqmsIfQueueLineNumber		1.3.6.1.4.1.18.3.5.1.16.2.1.4
Identifies the interface this queue belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfQueueId		1.3.6.1.4.1.18.3.5.1.16.2.1.5
Identifies the instance of this queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..30

wfDsqmsIfQueueType		1.3.6.1.4.1.18.3.5.1.16.2.1.6
Selects the queue scheduling type, strict priority or weighted round robin. In strict priority, the queues are serviced in the order of highest priority to lowest priority. In weighted round robin, each queue is serviced according to the weights.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	priority(1), weighted(2)

wfDsqmsIfQueueBestEffort		1.3.6.1.4.1.18.3.5.1.16.2.1.7
The indication of whether or not this queue is used for best effort traffic. It is default to not a best effort queue.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

wfDsqmsIfQueuePrioLevel		1.3.6.1.4.1.18.3.5.1.16.2.1.8
Priority level for this queue, 0=highest priority. A possible lowest priority can be 29. This parameter is applicable to priority queue only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..29

wfDsqmsIfQueuePrioTimeQuantum		1.3.6.1.4.1.18.3.5.1.16.2.1.9
Indicates the maximum amount of time (in msec) the queue is allowed to transmit data. This intends to avoid starvation of other queues. This parameter is applicable to priority queue only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..5000

wfDsqmsIfQueueCfgPktLimit		1.3.6.1.4.1.18.3.5.1.16.2.1.10
Configured maximum number of packets this queue can hold. If this value is not configured, default to zero, the system will determine the limit based on the number of buffers available and the number of queues configured on the slot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2147483647

wfDsqmsIfQueuePktLimit		1.3.6.1.4.1.18.3.5.1.16.2.1.11
Maximum number of packets this queue can hold. This value is filled in by the system if wfDsqmsIfQueueCfgPktLimit is set to default(0), otherwise it is wfDsqmsIfQueueCfgPktLimit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2147483647

wfDsqmsIfQueueByteLimit		1.3.6.1.4.1.18.3.5.1.16.2.1.12
Maximum number of bytes this queue can hold. Default to zero. If zero, no byte limit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2147483647

wfDsqmsIfQueueCfgWeight		1.3.6.1.4.1.18.3.5.1.16.2.1.13
Indicates the relative ratio of this queue over the sum of all the weighted queues on the same interface. For instance, this queue's CfgWeight is 5 and two other queues' CfgWeight are 3 and 2. This queue will get the weight of 5 over 10 (5+3+2) or 50%. The other queues's weights are 30% and 20%, respectively. This parameter is applicable to weighted queue only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

wfDsqmsIfQueueWeight		1.3.6.1.4.1.18.3.5.1.16.2.1.14
Actual weight, in percentage, is currently used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

wfDsqmsIfQueueQuantum		1.3.6.1.4.1.18.3.5.1.16.2.1.15
Amount of data (in bytes) this queue is allowed to transmit per scheduler's invocation. This value is calculated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfQueueFlowFairnessEnable		1.3.6.1.4.1.18.3.5.1.16.2.1.16
Indicates whether or not hash table should be used. When this parameter is enabled, hash table is used to separate data packets into buckets within this queue. This mechanism will improve the fairness among flows within a queue.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

wfDsqmsIfQueueJitterConst		1.3.6.1.4.1.18.3.5.1.16.2.1.17
Categorizes how sensitive traffic of this queue is to jitter effect, thus this parameter provides an indicator for calculating the bucket quantum.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	small(1), normal(2), large(4)

wfDsqmsIfQueueBucketQuantum		1.3.6.1.4.1.18.3.5.1.16.2.1.18
Amount of data (in bytes) a bucket within this queue is allowed to transmit per scheduler's invocation. This value is calculated based on queue quantum and the jitter constant parameters. This parameter is applicable to the flow fairness enable parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfQueueDropType		1.3.6.1.4.1.18.3.5.1.16.2.1.19
Indicates whether or not RED (Random Earlt Detection) is used for active queue management. If disabled, tail drop is used for this queue. This parameter is default to disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	red(1), tail-drop(2)

wfDsqmsIfQueuePktCount		1.3.6.1.4.1.18.3.5.1.16.2.1.20
Current number of packets in this queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfQueueByteCount		1.3.6.1.4.1.18.3.5.1.16.2.1.21
Current number of bytes in this queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfQueueXmitPkts		1.3.6.1.4.1.18.3.5.1.16.2.1.22
Total number of packets transmitted out of this queue since creation or last reset. This is a statistics parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfQueueXmitBytes		1.3.6.1.4.1.18.3.5.1.16.2.1.23
Toal number of bytes transmitted out of this queue since creation or last reset. This is a statistics parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfQueueDroppedPkts		1.3.6.1.4.1.18.3.5.1.16.2.1.24
Total number of packets dropped from this queue since creation or last reset. This is a statistics parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfQueueDroppedBytes		1.3.6.1.4.1.18.3.5.1.16.2.1.25
Total number of bytes dropped from this queue since creation or last reset. This is a statistics parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfDsqmsIfQueueRedEwqaGain		1.3.6.1.4.1.18.3.5.1.16.2.1.26
Gain value used in exp-weighted que average calculations. Value is expressed as percent 1%-100%
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

wfDsqmsIfQueueRedIdleLossRate		1.3.6.1.4.1.18.3.5.1.16.2.1.27
Rate - derivative from gain value for the case of empty queue. Rate with which average value is diminishes. For instance 30%, means 'Average size diminishes by 30% per second.' Value is expressed as percent 1%-99%
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..99

wfDsqmsIfClassifierTable		1.3.6.1.4.1.18.3.5.1.16.3
Table of DSQMS (DiffServ Queue Management and Scheduler) classifier.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfDsqmsIfClassifierEntry

wfDsqmsIfClassifierEntry		1.3.6.1.4.1.18.3.5.1.16.3.1
DSQMS classifier table entry. Classifier entry is used to select the queue and red function for IP packets, based on DS byte in the IP header.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfDsqmsIfClassifierEntry

wfDsqmsIfClassifierCreate		1.3.6.1.4.1.18.3.5.1.16.3.1.1
Create/Delete parameter. Default is created.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	created(1), deleted(2)

wfDsqmsIfClassifierLineNumber		1.3.6.1.4.1.18.3.5.1.16.3.1.2
Identifies the interface this classifier belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfDsqmsIfClassifierDSCP		1.3.6.1.4.1.18.3.5.1.16.3.1.3
DS Code Point (DSCP) for this classifier. This is also an identifier for this instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

wfDsqmsIfClassifierQueueId		1.3.6.1.4.1.18.3.5.1.16.3.1.4
Indicates the queue to be used for IP packets whose DSCPs match with this classifier's DSCP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..30

wfDsqmsIfClassifierRedId		1.3.6.1.4.1.18.3.5.1.16.3.1.5
Indicates the RED function to be used for IP packets whose DSCPs match with this classifier's DSCP. RedId of zero means RED is not applicable for this DSCP in the queue indicated by QueueId parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

wfDsqmsRedTable		1.3.6.1.4.1.18.3.5.1.16.4
Table of DSQMS (DiffServ Queue Management and Scheduler) RED (Random Early Detection).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfDsqmsRedEntry

wfDsqmsRedEntry		1.3.6.1.4.1.18.3.5.1.16.4.1
DSQMS Red table entry. Red entry is used to configure te RED parameters to make up RED drop probability.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfDsqmsRedEntry

wfDsqmsRedCreate		1.3.6.1.4.1.18.3.5.1.16.4.1.1
Create/Delete parameter. Default is created.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	created(1), deleted(2)

wfDsqmsRedId		1.3.6.1.4.1.18.3.5.1.16.4.1.2
Unique identifier.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

wfDsqmsRedCfgStatus		1.3.6.1.4.1.18.3.5.1.16.4.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	defined(1), unDefined(2), notPresent(8)

wfDsqmsRed2ndOrderConst		1.3.6.1.4.1.18.3.5.1.16.4.1.4
Highest order constant
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1000

wfDsqmsRed1stOrderConst		1.3.6.1.4.1.18.3.5.1.16.4.1.5
Lowest order constant
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

wfDsqmsRedMinTh		1.3.6.1.4.1.18.3.5.1.16.4.1.6
Lower portion of the average queue value (percent) where prob. of being dropped is always 0 (zero)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

wfDsqmsRedMaxTh		1.3.6.1.4.1.18.3.5.1.16.4.1.7
Upper portion of the average queue value (percent) where prob. of being dropped is always 0 (zero)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..100