Wellfleet-APPN-MIB

File: Wellfleet-APPN-MIB.mib (255284 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

Counter Gauge OBJECT-TYPE
DisplayString wfAppnGroup

Defined Types

WfAppnNodeDlcEntry  
SEQUENCE    
  wfAppnNodeDlcDelete INTEGER
  wfAppnNodeDlcDisable INTEGER
  wfAppnNodeDlcName DisplayString
  wfAppnNodeDlcState INTEGER
  wfAppnNodeDlcType INTEGER
  wfAppnNodeDlcNegLsSupportDisable INTEGER
  wfAppnNodeDlcCct INTEGER
  wfAppnNodeDlcData OCTET STRING

WfAppnNodePortEntry  
SEQUENCE    
  wfAppnNodePortDelete INTEGER
  wfAppnNodePortDisable INTEGER
  wfAppnNodePortName DisplayString
  wfAppnNodePortState INTEGER
  wfAppnNodePortDlcType INTEGER
  wfAppnNodePortPortType INTEGER
  wfAppnNodePortSIMRIM INTEGER
  wfAppnNodePortLsRole INTEGER
  wfAppnNodePortMaxRcvBtuSize INTEGER
  wfAppnNodePortMaxIframeWindow INTEGER
  wfAppnNodePortDefLsGoodXids Counter
  wfAppnNodePortDefLsBadXids Counter
  wfAppnNodePortDynLsGoodXids Counter
  wfAppnNodePortDynLsBadXids Counter
  wfAppnNodePortDlcName DisplayString
  wfAppnNodePortNumber INTEGER
  wfAppnNodePortTotLinkActLim INTEGER
  wfAppnNodePortInbLinkActLim INTEGER
  wfAppnNodePortOutLinkActLim INTEGER
  wfAppnNodePortActXidExchangeLimit INTEGER
  wfAppnNodePortNonActXidExchangeLimit INTEGER
  wfAppnNodePortLsXmitRcvCap INTEGER
  wfAppnNodePortTargetPacingCount INTEGER
  wfAppnNodePortMaxSendBtuSize INTEGER
  wfAppnNodePortImplicitCpSessions INTEGER
  wfAppnNodePortImplicitLimResource INTEGER
  wfAppnNodePortImplicitEffCap INTEGER
  wfAppnNodePortImplicitConnCost INTEGER
  wfAppnNodePortImplicitByteCost INTEGER
  wfAppnNodePortImplicitSecurity INTEGER
  wfAppnNodePortImplicitDelay INTEGER
  wfAppnNodePortImplicitUsr1 INTEGER
  wfAppnNodePortImplicitUsr2 INTEGER
  wfAppnNodePortImplicitUsr3 INTEGER
  wfAppnNodePortImplicitHprDisable INTEGER
  wfAppnNodePortImplicitHprLlErrorDisable INTEGER
  wfAppnNodePortImplicitLinkDeactTime INTEGER
  wfAppnNodePortDlcData OCTET STRING
  wfAppnNodePortHprDlcData OCTET STRING
  wfAppnNodePortImplicitDlurDisable INTEGER
  wfAppnNodePortImplicitUplinkToEN INTEGER

WfAppnNodeLsEntry  
SEQUENCE    
  wfAppnNodeLsDelete INTEGER
  wfAppnNodeLsDisable INTEGER
  wfAppnNodeLsName DisplayString
  wfAppnNodeLsPortName DisplayString
  wfAppnNodeLsState INTEGER
  wfAppnNodeLsCpName DisplayString
  wfAppnNodeLsTgNum INTEGER
  wfAppnNodeLsLimResource INTEGER
  wfAppnNodeLsMigration INTEGER
  wfAppnNodeLsBlockNum DisplayString
  wfAppnNodeLsIdNum DisplayString
  wfAppnNodeLsCpCpSession INTEGER
  wfAppnNodeLsTargetPacingCount INTEGER
  wfAppnNodeLsMaxSendBtuSize INTEGER
  wfAppnNodeLsEffCap INTEGER
  wfAppnNodeLsConnCost INTEGER
  wfAppnNodeLsByteCost INTEGER
  wfAppnNodeLsSecurity INTEGER
  wfAppnNodeLsDelay INTEGER
  wfAppnNodeLsUsr1 INTEGER
  wfAppnNodeLsUsr2 INTEGER
  wfAppnNodeLsUsr3 INTEGER
  wfAppnNodeLsCpType INTEGER
  wfAppnNodeLsAutoActivateDisable INTEGER
  wfAppnNodeLsSolicitSscpSessionsDisable INTEGER
  wfAppnNodeLsUseDefaultTgChars INTEGER
  wfAppnNodeLsLinkData OCTET STRING
  wfAppnNodeLsDlurDisable INTEGER
  wfAppnNodeLsDspuName DisplayString
  wfAppnNodeLsDlusName DisplayString
  wfAppnNodeLsBackupDlusName DisplayString
  wfAppnNodeLsHprDisable INTEGER
  wfAppnNodeLsHprLlErrorDisable INTEGER
  wfAppnNodeLsLinkDeactTime INTEGER
  wfAppnNodeLsLinkRetryCount INTEGER
  wfAppnNodeLsBranchLinkType INTEGER
  wfAppnNodeLsAdjBrNNLinkSupp INTEGER
  wfAppnNodeLsDefaultNNS INTEGER

WfAppnNodeLsStatusEntry  
SEQUENCE    
  wfAppnNodeLsStatusName DisplayString
  wfAppnNodeLsStatusPortName DisplayString
  wfAppnNodeLsStatusDlcType INTEGER
  wfAppnNodeLsStatusDynamic INTEGER
  wfAppnNodeLsStatusState INTEGER
  wfAppnNodeLsStatusCpName DisplayString
  wfAppnNodeLsStatusTgNum INTEGER
  wfAppnNodeLsStatusLimResource INTEGER
  wfAppnNodeLsStatusMigration INTEGER
  wfAppnNodeLsStatusBlockNum DisplayString
  wfAppnNodeLsStatusIdNum DisplayString
  wfAppnNodeLsStatusCpCpSession INTEGER
  wfAppnNodeLsStatusTargetPacingCount INTEGER
  wfAppnNodeLsStatusMaxSendBtuSize INTEGER
  wfAppnNodeLsStatusEffCap INTEGER
  wfAppnNodeLsStatusConnCost INTEGER
  wfAppnNodeLsStatusByteCost INTEGER
  wfAppnNodeLsStatusSecurity INTEGER
  wfAppnNodeLsStatusDelay INTEGER
  wfAppnNodeLsStatusUsr1 INTEGER
  wfAppnNodeLsStatusUsr2 INTEGER
  wfAppnNodeLsStatusUsr3 INTEGER
  wfAppnNodeLsStatusInXidBytes Counter
  wfAppnNodeLsStatusInMsgBytes Counter
  wfAppnNodeLsStatusInXidFrames Counter
  wfAppnNodeLsStatusInMsgFrames Counter
  wfAppnNodeLsStatusOutXidBytes Counter
  wfAppnNodeLsStatusOutMsgBytes Counter
  wfAppnNodeLsStatusOutXidFrames Counter
  wfAppnNodeLsStatusOutMsgFrames Counter
  wfAppnNodeLsStatusEchoRsps Counter
  wfAppnNodeLsStatusCurrentDelay INTEGER
  wfAppnNodeLsStatusMaxDelay INTEGER
  wfAppnNodeLsStatusMinDelay INTEGER
  wfAppnNodeLsStatusMaxDelayTime INTEGER
  wfAppnNodeLsStatusGoodXids Counter
  wfAppnNodeLsStatusBadXids Counter
  wfAppnNodeLsStatusActiveSessions INTEGER
  wfAppnNodeLsStatusInvalidSnaFrames Counter
  wfAppnNodeLsStatusInScFrames Counter
  wfAppnNodeLsStatusOutScFrames Counter
  wfAppnNodeLsStatusCpType INTEGER
  wfAppnNodeLsStatusStartTime INTEGER
  wfAppnNodeLsStatusStopTime INTEGER
  wfAppnNodeLsStatusUpTime INTEGER
  wfAppnNodeLsStatusDeactCause INTEGER
  wfAppnNodeLsStatusHprSupport INTEGER
  wfAppnNodeLsStatusHprLlErrSupport INTEGER
  wfAppnNodeLsStatusAnrLabel INTEGER
  wfAppnNodeLsStatusLinkData OCTET STRING

WfAppnNodeCnEntry  
SEQUENCE    
  wfAppnNodeCnDelete INTEGER
  wfAppnNodeCnDisable INTEGER
  wfAppnNodeCnFqName DisplayString
  wfAppnNodeCnState INTEGER
  wfAppnNodeCnEffCap INTEGER
  wfAppnNodeCnConnCost INTEGER
  wfAppnNodeCnByteCost INTEGER
  wfAppnNodeCnSecurity INTEGER
  wfAppnNodeCnDelay INTEGER
  wfAppnNodeCnUsr1 INTEGER
  wfAppnNodeCnUsr2 INTEGER
  wfAppnNodeCnUsr3 INTEGER

WfAppnNodeCnPortEntry  
SEQUENCE    
  wfAppnNodeCnPortDelete INTEGER
  wfAppnNodeCnPortDisable INTEGER
  wfAppnNodeCnPortCnName DisplayString
  wfAppnNodeCnPortPortName DisplayString
  wfAppnNodeCnPortState INTEGER

WfAppnNodeIsrSessionEntry  
SEQUENCE    
  wfAppnNodeIsrSessionPcid OCTET STRING
  wfAppnNodeIsrSessionFqCpName DisplayString
  wfAppnNodeIsrSessionTransPriority INTEGER
  wfAppnNodeIsrSessionCos DisplayString
  wfAppnNodeIsrSessionLimResource INTEGER
  wfAppnNodeIsrSessionRscv OCTET STRING
  wfAppnNodeIsrSessionPriSendRuSize INTEGER
  wfAppnNodeIsrSessionPriRcvRuSize INTEGER
  wfAppnNodeIsrSessionPriMaxSendBtuSize INTEGER
  wfAppnNodeIsrSessionPriMaxRcvBtuSize INTEGER
  wfAppnNodeIsrSessionPriMaxSendPacing INTEGER
  wfAppnNodeIsrSessionPriCurSendPacing INTEGER
  wfAppnNodeIsrSessionPriMaxRcvPacing INTEGER
  wfAppnNodeIsrSessionPriCurRcvPacing INTEGER
  wfAppnNodeIsrSessionPriSendFrames Counter
  wfAppnNodeIsrSessionPriSendBytes Counter
  wfAppnNodeIsrSessionPriSendFmdFrames Counter
  wfAppnNodeIsrSessionPriRcvFrames Counter
  wfAppnNodeIsrSessionPriRcvBytes Counter
  wfAppnNodeIsrSessionPriRcvFmdFrames Counter
  wfAppnNodeIsrSessionPriSidh INTEGER
  wfAppnNodeIsrSessionPriSidl INTEGER
  wfAppnNodeIsrSessionPriOdai INTEGER
  wfAppnNodeIsrSessionPriLsName DisplayString
  wfAppnNodeIsrSessionSecSendRuSize INTEGER
  wfAppnNodeIsrSessionSecRcvRuSize INTEGER
  wfAppnNodeIsrSessionSecMaxSendBtuSize INTEGER
  wfAppnNodeIsrSessionSecMaxRcvBtuSize INTEGER
  wfAppnNodeIsrSessionSecMaxSendPacing INTEGER
  wfAppnNodeIsrSessionSecCurSendPacing INTEGER
  wfAppnNodeIsrSessionSecMaxRcvPacing INTEGER
  wfAppnNodeIsrSessionSecCurRcvPacing INTEGER
  wfAppnNodeIsrSessionSecSendFrames Counter
  wfAppnNodeIsrSessionSecSendBytes Counter
  wfAppnNodeIsrSessionSecSendFmdFrames Counter
  wfAppnNodeIsrSessionSecRcvFrames Counter
  wfAppnNodeIsrSessionSecRcvBytes Counter
  wfAppnNodeIsrSessionSecRcvFmdFrames Counter
  wfAppnNodeIsrSessionSecSidh INTEGER
  wfAppnNodeIsrSessionSecSidl INTEGER
  wfAppnNodeIsrSessionSecOdai INTEGER
  wfAppnNodeIsrSessionSecLsName DisplayString
  wfAppnNodeIsrSessionRscvText DisplayString

WfAppnNodeEndptSessionEntry  
SEQUENCE    
  wfAppnNodeEndptSessionId OCTET STRING
  wfAppnNodeEndptSessionPcid OCTET STRING
  wfAppnNodeEndptSessionFqCpName DisplayString
  wfAppnNodeEndptSessionFqPluName DisplayString
  wfAppnNodeEndptSessionTransPriority INTEGER
  wfAppnNodeEndptSessionMode DisplayString
  wfAppnNodeEndptSessionCos DisplayString
  wfAppnNodeEndptSessionLimResource INTEGER
  wfAppnNodeEndptSessionPolarity INTEGER
  wfAppnNodeEndptSessionContention INTEGER
  wfAppnNodeEndptSessionRscv OCTET STRING
  wfAppnNodeEndptSessionSendRuSize INTEGER
  wfAppnNodeEndptSessionRcvRuSize INTEGER
  wfAppnNodeEndptSessionMaxSendBtuSize INTEGER
  wfAppnNodeEndptSessionMaxRcvBtuSize INTEGER
  wfAppnNodeEndptSessionMaxSendPacing INTEGER
  wfAppnNodeEndptSessionCurSendPacing INTEGER
  wfAppnNodeEndptSessionMaxRcvPacing INTEGER
  wfAppnNodeEndptSessionCurRcvPacing INTEGER
  wfAppnNodeEndptSessionSendFrames Counter
  wfAppnNodeEndptSessionSendBytes Counter
  wfAppnNodeEndptSessionSendFmdFrames Counter
  wfAppnNodeEndptSessionRcvFrames Counter
  wfAppnNodeEndptSessionRcvBytes Counter
  wfAppnNodeEndptSessionRcvFmdFrames Counter
  wfAppnNodeEndptSessionSidh INTEGER
  wfAppnNodeEndptSessionSidl INTEGER
  wfAppnNodeEndptSessionOdai INTEGER
  wfAppnNodeEndptSessionLsName DisplayString
  wfAppnNodeEndptSessionRscvText DisplayString

WfAppnNodeRtpConnectionEntry  
SEQUENCE    
  wfAppnNodeRtpConnectionName DisplayString
  wfAppnNodeRtpConnectionDestName DisplayString
  wfAppnNodeRtpConnectionFirstHopLsName DisplayString
  wfAppnNodeRtpConnectionCosName DisplayString
  wfAppnNodeRtpConnectionMaxBtuSize INTEGER
  wfAppnNodeRtpConnectionLivenessTimer INTEGER
  wfAppnNodeRtpConnectionLivenessTimeouts Counter
  wfAppnNodeRtpConnectionLocalTcid OCTET STRING
  wfAppnNodeRtpConnectionRemoteTcid OCTET STRING
  wfAppnNodeRtpConnectionActiveSessions INTEGER
  wfAppnNodeRtpConnectionSendBytes Counter
  wfAppnNodeRtpConnectionSendPackets Counter
  wfAppnNodeRtpConnectionSendSessionControlFrames Counter
  wfAppnNodeRtpConnectionSendRate Gauge
  wfAppnNodeRtpConnectionMaxSendRate INTEGER
  wfAppnNodeRtpConnectionMinSendRate INTEGER
  wfAppnNodeRtpConnectionRcvBytes Counter
  wfAppnNodeRtpConnectionRcvPackets Counter
  wfAppnNodeRtpConnectionRcvSessionControlFrames Counter
  wfAppnNodeRtpConnectionRcvInvalidSnaFrames Counter
  wfAppnNodeRtpConnectionRcvRate Gauge
  wfAppnNodeRtpConnectionMaxRcvRate INTEGER
  wfAppnNodeRtpConnectionMinRcvRate INTEGER
  wfAppnNodeRtpConnectionDiscardedBytes Counter
  wfAppnNodeRtpConnectionDiscardedPackets Counter
  wfAppnNodeRtpConnectionResentBytes Counter
  wfAppnNodeRtpConnectionResentPackets Counter
  wfAppnNodeRtpConnectionUpTime INTEGER
  wfAppnNodeRtpConnectionRoundTripTime INTEGER
  wfAppnNodeRtpConnectionSmoothRoundTripTime INTEGER
  wfAppnNodeRtpConnectionBurstSize INTEGER
  wfAppnNodeRtpConnectionSrtExpiries Counter
  wfAppnNodeRtpConnectionShortReqTimer INTEGER
  wfAppnNodeRtpConnectionGapsDetected Counter
  wfAppnNodeRtpConnectionRscv OCTET STRING
  wfAppnNodeRtpConnectionRscvText DisplayString

WfAppnNnAdjNodeEntry  
SEQUENCE    
  wfAppnNnAdjNodeAdjName DisplayString
  wfAppnNnAdjNodeCpCpSessStatus INTEGER
  wfAppnNnAdjNodeOutOfSeqTdus Gauge
  wfAppnNnAdjNodeLastFrsnSent INTEGER
  wfAppnNnAdjNodeLastFrsnRcvd INTEGER

WfAppnNnTopologyEntry  
SEQUENCE    
  wfAppnNnNodeName DisplayString
  wfAppnNnNodeFrsn INTEGER
  wfAppnNnNodeEntryTimeLeft INTEGER
  wfAppnNnNodeType INTEGER
  wfAppnNnNodeRsn INTEGER
  wfAppnNnNodeRouteAddResist INTEGER
  wfAppnNnNodeCongested INTEGER
  wfAppnNnNodeIsrDepleted INTEGER
  wfAppnNnNodeEndptDepleted INTEGER
  wfAppnNnNodeQuiescing INTEGER
  wfAppnNnNodeGateway INTEGER
  wfAppnNnNodeCentralDirectory INTEGER
  wfAppnNnNodeIsr INTEGER
  wfAppnNnNodeChainSupport INTEGER
  wfAppnNnNodeHprBase INTEGER
  wfAppnNnNodeRtpTower INTEGER

WfAppnNnTgTopologyEntry  
SEQUENCE    
  wfAppnNnTgOwner DisplayString
  wfAppnNnTgDest DisplayString
  wfAppnNnTgNum INTEGER
  wfAppnNnTgFrsn INTEGER
  wfAppnNnTgEntryTimeLeft INTEGER
  wfAppnNnTgDestVirtual INTEGER
  wfAppnNnTgDlcData OCTET STRING
  wfAppnNnTgRsn INTEGER
  wfAppnNnTgOperational INTEGER
  wfAppnNnTgQuiescing INTEGER
  wfAppnNnTgCpCpSession INTEGER
  wfAppnNnTgEffCap INTEGER
  wfAppnNnTgConnCost INTEGER
  wfAppnNnTgByteCost INTEGER
  wfAppnNnTgSecurity INTEGER
  wfAppnNnTgDelay INTEGER
  wfAppnNnTgModemClass INTEGER
  wfAppnNnTgUsr1 INTEGER
  wfAppnNnTgUsr2 INTEGER
  wfAppnNnTgUsr3 INTEGER
  wfAppnNnTgHprBase INTEGER
  wfAppnNnTgRtpTower INTEGER

WfAppnNnTopologyFREntry  
SEQUENCE    
  wfAppnNnNodeFRName DisplayString
  wfAppnNnNodeFRFrsn INTEGER
  wfAppnNnNodeFREntryTimeLeft INTEGER
  wfAppnNnNodeFRType INTEGER
  wfAppnNnNodeFRRsn INTEGER
  wfAppnNnNodeFRRouteAddResist INTEGER
  wfAppnNnNodeFRCongested INTEGER
  wfAppnNnNodeFRIsrDepleted INTEGER
  wfAppnNnNodeFREndptDepleted INTEGER
  wfAppnNnNodeFRQuiescing INTEGER
  wfAppnNnNodeFRGateway INTEGER
  wfAppnNnNodeFRCentralDirectory INTEGER
  wfAppnNnNodeFRIsr INTEGER
  wfAppnNnNodeFRChainSupport INTEGER
  wfAppnNnNodeFRHprBase INTEGER
  wfAppnNnNodeFRRtpTower INTEGER

WfAppnNnTgTopologyFREntry  
SEQUENCE    
  wfAppnNnTgFROwner DisplayString
  wfAppnNnTgFRDest DisplayString
  wfAppnNnTgFRNum INTEGER
  wfAppnNnTgFRFrsn INTEGER
  wfAppnNnTgFREntryTimeLeft INTEGER
  wfAppnNnTgFRDestVirtual INTEGER
  wfAppnNnTgFRDlcData OCTET STRING
  wfAppnNnTgFRRsn INTEGER
  wfAppnNnTgFROperational INTEGER
  wfAppnNnTgFRQuiescing INTEGER
  wfAppnNnTgFRCpCpSession INTEGER
  wfAppnNnTgFREffCap INTEGER
  wfAppnNnTgFRConnCost INTEGER
  wfAppnNnTgFRByteCost INTEGER
  wfAppnNnTgFRSecurity INTEGER
  wfAppnNnTgFRDelay INTEGER
  wfAppnNnTgFRModemClass INTEGER
  wfAppnNnTgFRUsr1 INTEGER
  wfAppnNnTgFRUsr2 INTEGER
  wfAppnNnTgFRUsr3 INTEGER
  wfAppnNnTgFRHprBase INTEGER
  wfAppnNnTgFRRtpTower INTEGER

WfAppnLocalTgEntry  
SEQUENCE    
  wfAppnLocalTgDest DisplayString
  wfAppnLocalTgNum INTEGER
  wfAppnLocalTgDestVirtual INTEGER
  wfAppnLocalTgDlcData OCTET STRING
  wfAppnLocalTgRsn INTEGER
  wfAppnLocalTgOperational INTEGER
  wfAppnLocalTgQuiescing INTEGER
  wfAppnLocalTgCpCpSession INTEGER
  wfAppnLocalTgEffCap INTEGER
  wfAppnLocalTgConnCost INTEGER
  wfAppnLocalTgByteCost INTEGER
  wfAppnLocalTgSecurity INTEGER
  wfAppnLocalTgDelay INTEGER
  wfAppnLocalTgModemClass INTEGER
  wfAppnLocalTgUsr1 INTEGER
  wfAppnLocalTgUsr2 INTEGER
  wfAppnLocalTgUsr3 INTEGER

WfAppnDirEntry  
SEQUENCE    
  wfAppnDirLuName DisplayString
  wfAppnDirServerName DisplayString
  wfAppnDirLuOwnerName DisplayString
  wfAppnDirLocation INTEGER
  wfAppnDirType INTEGER
  wfAppnDirWildCard INTEGER

WfAppnDirDefineEntry  
SEQUENCE    
  wfAppnDirDefineDelete INTEGER
  wfAppnDirDefineDisable INTEGER
  wfAppnDirDefineResourceName DisplayString
  wfAppnDirDefineResourceType INTEGER
  wfAppnDirDefineParentName DisplayString
  wfAppnDirDefineParentType INTEGER

WfAppnCosModeEntry  
SEQUENCE    
  wfAppnCosModeName DisplayString
  wfAppnCosModeCosName DisplayString

WfAppnCosNameEntry  
SEQUENCE    
  wfAppnCosName DisplayString
  wfAppnCosTransPriority INTEGER

WfAppnCosNodeRowEntry  
SEQUENCE    
  wfAppnCosNodeRowName DisplayString
  wfAppnCosNodeRowIndex INTEGER
  wfAppnCosNodeRowWgt INTEGER
  wfAppnCosNodeRowResistMin INTEGER
  wfAppnCosNodeRowResistMax INTEGER
  wfAppnCosNodeRowMinCongestAllow INTEGER
  wfAppnCosNodeRowMaxCongestAllow INTEGER

WfAppnCosTgRowEntry  
SEQUENCE    
  wfAppnCosTgRowName DisplayString
  wfAppnCosTgRowIndex INTEGER
  wfAppnCosTgRowWgt INTEGER
  wfAppnCosTgRowEffCapMin INTEGER
  wfAppnCosTgRowEffCapMax INTEGER
  wfAppnCosTgRowConnCostMin INTEGER
  wfAppnCosTgRowConnCostMax INTEGER
  wfAppnCosTgRowByteCostMin INTEGER
  wfAppnCosTgRowByteCostMax INTEGER
  wfAppnCosTgRowSecurityMin INTEGER
  wfAppnCosTgRowSecurityMax INTEGER
  wfAppnCosTgRowDelayMin INTEGER
  wfAppnCosTgRowDelayMax INTEGER
  wfAppnCosTgRowUsr1Min INTEGER
  wfAppnCosTgRowUsr1Max INTEGER
  wfAppnCosTgRowUsr2Min INTEGER
  wfAppnCosTgRowUsr2Max INTEGER
  wfAppnCosTgRowUsr3Min INTEGER
  wfAppnCosTgRowUsr3Max INTEGER

WfAppnTpPingEntry  
SEQUENCE    
  wfAppnTpPingDelete INTEGER
  wfAppnTpPingDisable INTEGER
  wfAppnTpPingIndex INTEGER
  wfAppnTpPingFqPluName DisplayString
  wfAppnTpPingDataLength INTEGER
  wfAppnTpPingConsecutiveSends INTEGER
  wfAppnTpPingEchoDisable INTEGER
  wfAppnTpPingIterations INTEGER
  wfAppnTpPingPartnerTpName DisplayString
  wfAppnTpPingMode DisplayString
  wfAppnTpPingState INTEGER
  wfAppnTpPingAllocTime INTEGER
  wfAppnTpPingMinTime INTEGER
  wfAppnTpPingMaxTime INTEGER
  wfAppnTpPingAvgTime INTEGER
  wfAppnTpPingPartnerVersion DisplayString

WfAppnTpTunnelEntry  
SEQUENCE    
  wfAppnTpTunnelDelete INTEGER
  wfAppnTpTunnelDisable INTEGER
  wfAppnTpTunnelState INTEGER
  wfAppnTpTunnelCct INTEGER
  wfAppnTpTunnelFqPluName DisplayString
  wfAppnTpTunnelModeName DisplayString
  wfAppnTpTunnelMedia INTEGER
  wfAppnTpTunnelMacAddress OCTET STRING
  wfAppnTpTunnelTxFrames Counter
  wfAppnTpTunnelRxFrames Counter
  wfAppnTpTunnelDropFrames Counter

WfAppnDlurLuEntry  
SEQUENCE    
  wfAppnDlurLuName DisplayString
  wfAppnDlurLuPuName DisplayString
  wfAppnDlurLuDlusName DisplayString
  wfAppnDlurLuNauAddress INTEGER
  wfAppnDlurLuPluName DisplayString
  wfAppnDlurLuRscv OCTET STRING
  wfAppnDlurLuRscvText DisplayString

WfAppnDlurPuEntry  
SEQUENCE    
  wfAppnDlurPuName DisplayString
  wfAppnDlurPuId OCTET STRING
  wfAppnDlurPuDefinedDlusName DisplayString
  wfAppnDlurPuBackupDlusName DisplayString
  wfAppnDlurPuActiveDlusName DisplayString
  wfAppnDlurPuPcid OCTET STRING
  wfAppnDlurPuFqCpName DisplayString

WfAppnDlurDlusEntry  
SEQUENCE    
  wfAppnDlurDlusName DisplayString
  wfAppnDlurDlusIsDefault INTEGER
  wfAppnDlurDlusIsBackupDefault INTEGER
  wfAppnDlurDlusPipeState INTEGER
  wfAppnDlurDlusActivePus INTEGER
  wfAppnDlurDlusSentReqactpus Counter
  wfAppnDlurDlusRcvReqactpuRsps Counter
  wfAppnDlurDlusRcvActpus Counter
  wfAppnDlurDlusSentActpuRsps Counter
  wfAppnDlurDlusSentReqdactpus Counter
  wfAppnDlurDlusRcvReqdactpuRsps Counter
  wfAppnDlurDlusRcvDactpus Counter
  wfAppnDlurDlusSentDactpuRsps Counter
  wfAppnDlurDlusRcvActlus Counter
  wfAppnDlurDlusSentActluRsps Counter
  wfAppnDlurDlusRcvDactlus Counter
  wfAppnDlurDlusSentDactluRsps Counter
  wfAppnDlurDlusRcvSscpPuMus Counter
  wfAppnDlurDlusSentSscpPuMus Counter
  wfAppnDlurDlusRcvSscpLuMus Counter
  wfAppnDlurDlusSentSscpLuMus Counter

Defined Values

wfAppnNode 1.3.6.1.4.1.18.3.5.14.1
OBJECT IDENTIFIER    

wfAppnNodeInfoAndCaps 1.3.6.1.4.1.18.3.5.14.1.1
OBJECT IDENTIFIER    

wfAppnNn 1.3.6.1.4.1.18.3.5.14.2
OBJECT IDENTIFIER    

wfAppnNnTopology 1.3.6.1.4.1.18.3.5.14.2.3
OBJECT IDENTIFIER    

wfAppnLocalTopology 1.3.6.1.4.1.18.3.5.14.3
OBJECT IDENTIFIER    

wfAppnLocalThisNode 1.3.6.1.4.1.18.3.5.14.3.1
OBJECT IDENTIFIER    

wfAppnDirectory 1.3.6.1.4.1.18.3.5.14.4
OBJECT IDENTIFIER    

wfAppnCos 1.3.6.1.4.1.18.3.5.14.5
OBJECT IDENTIFIER    

wfAppnTps 1.3.6.1.4.1.18.3.5.14.6
OBJECT IDENTIFIER    

wfAppnDlu 1.3.6.1.4.1.18.3.5.14.7
OBJECT IDENTIFIER    

wfAppnNodeDelete 1.3.6.1.4.1.18.3.5.14.1.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the APPN Node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnNodeDisable 1.3.6.1.4.1.18.3.5.14.1.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the APPN Node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeState 1.3.6.1.4.1.18.3.5.14.1.1.3
The current state of the APPN CP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfAppnNodeCpName 1.3.6.1.4.1.18.3.5.14.1.1.4
Administratively-assigned network name for this node in the format NETID.CPNAME.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeNetid 1.3.6.1.4.1.18.3.5.14.1.1.5
Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully-qualified control point name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeBlockNum 1.3.6.1.4.1.18.3.5.14.1.1.6
The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeIdNum 1.3.6.1.4.1.18.3.5.14.1.1.7
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number from the node_id. This node_id is used to identify the local node and is included in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeType 1.3.6.1.4.1.18.3.5.14.1.1.8
Type of APPN node, either Network Node, End Node, or Low Entry Networking Node. This node is always a Network Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nn(1), en(2), len(4)  

wfAppnNodeUpTime 1.3.6.1.4.1.18.3.5.14.1.1.9
Time (in hundredths of a second) since this APPN node was initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeNegotLs 1.3.6.1.4.1.18.3.5.14.1.1.10
Indicates whether this node supports negotiable link stations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeSegReasm 1.3.6.1.4.1.18.3.5.14.1.1.11
Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeBindReasm 1.3.6.1.4.1.18.3.5.14.1.1.12
Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeParallelTg 1.3.6.1.4.1.18.3.5.14.1.1.13
Indicates whether this node supports parallel TGs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeService 1.3.6.1.4.1.18.3.5.14.1.1.14
Indicates whether this node allows call-in from nodes not defined locally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeAdaptiveBindPacing 1.3.6.1.4.1.18.3.5.14.1.1.15
Indicates whether this node supports adaptive bind pacing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeNnRcvRegChar 1.3.6.1.4.1.18.3.5.14.1.1.16
Indicates whether this node supports receiving registered characteristics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeNnGateway 1.3.6.1.4.1.18.3.5.14.1.1.17
Indicates whether this is a gateway node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeNnCentralDirectory 1.3.6.1.4.1.18.3.5.14.1.1.18
Indicates whether this node supports central directory cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeNnTreeCache 1.3.6.1.4.1.18.3.5.14.1.1.19
Indicates whether this node supports Route Tree caching.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeNnTreeUpdate 1.3.6.1.4.1.18.3.5.14.1.1.20
Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeNnRouteAddResist 1.3.6.1.4.1.18.3.5.14.1.1.21
Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeNnIsr 1.3.6.1.4.1.18.3.5.14.1.1.22
Indicates whether the node supports intermediate session routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeNnFrsn 1.3.6.1.4.1.18.3.5.14.1.1.23
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeModeToCosDisable 1.3.6.1.4.1.18.3.5.14.1.1.24
Indicates whether Mode to Cos mapping is supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeMdsDisable 1.3.6.1.4.1.18.3.5.14.1.1.25
Enables Multiple Domain Support
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeRegWithCdsDisable 1.3.6.1.4.1.18.3.5.14.1.1.26
Enable Registration of Local and Domain resources with Central Directory Server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeAlertQSize 1.3.6.1.4.1.18.3.5.14.1.1.27
Size of the MDS Send Alert Queue Size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..2147483647  

wfAppnNodeCosCacheSize 1.3.6.1.4.1.18.3.5.14.1.1.28
Size of the COS Database weights cache This should be set to the number of COSs defined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 8..2147483647  

wfAppnNodeStoreEndpointRscvsDisable 1.3.6.1.4.1.18.3.5.14.1.1.29
Store RSCVs for Endpoint sessions?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeNnMaxLocates 1.3.6.1.4.1.18.3.5.14.1.1.30
Maximum simultaneous Locates that this node will process
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 8..2147483647  

wfAppnNodeNnDirCacheSize 1.3.6.1.4.1.18.3.5.14.1.1.31
Maximum size (entry count) of the Directory Services cache.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER def(100)  

wfAppnNodeNnMaxDirEntries 1.3.6.1.4.1.18.3.5.14.1.1.32
Maximum Number of entries in Directory Database. A value of zero means unlimited
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnNodeNnLocateTimeout 1.3.6.1.4.1.18.3.5.14.1.1.33
Specifies a time (in seconds) before a network search will timeout. A value of zero means no timeout
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER def(60)  

wfAppnNodeNnTreeCacheSize 1.3.6.1.4.1.18.3.5.14.1.1.34
Size of the Topology Database routing tree cache.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 8..2147483647  

wfAppnNodeNnTreeCacheUseLimit 1.3.6.1.4.1.18.3.5.14.1.1.35
Number of times a cached Routing Tree will be used before it is recalculated
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfAppnNodeNnMaxTdmNodes 1.3.6.1.4.1.18.3.5.14.1.1.36
Maximum number of nodes in the topology database. A value of zero means unlimited
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnNodeNnMaxTdmTgs 1.3.6.1.4.1.18.3.5.14.1.1.37
Maximum number of TGs in the topology database. A value of zero means unlimited
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnNodeNnMaxIsrSessions 1.3.6.1.4.1.18.3.5.14.1.1.38
Maximum number of Intermediate Sessions that this node will route
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 100..2147483647  

wfAppnNodeNnIsrSessionUpperThresh 1.3.6.1.4.1.18.3.5.14.1.1.39
ISR Session Threshold at which the node is considered congested. This value must be less than that of wfAppnNodeNnMaxIsrSessions
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER def(900)  

wfAppnNodeNnIsrSessionLowerThresh 1.3.6.1.4.1.18.3.5.14.1.1.40
ISR Session Threshold at which the node is no longer considered congested. This value must be less than that of wfAppnNodeNnIsrSessionUpperThresh
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER def(800)  

wfAppnNodeNnIsrMaxRuSize 1.3.6.1.4.1.18.3.5.14.1.1.41
Maximum RU size supported for intermediate sessions
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 256..4096  

wfAppnNodeNnIsrRcvPacingWindow 1.3.6.1.4.1.18.3.5.14.1.1.42
Receive Pacing window for intermediate sessions
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

wfAppnNodeNnStoreIsrRscvsDisable 1.3.6.1.4.1.18.3.5.14.1.1.43
Store RSCVs for intermediate sessions? (for network monitoring)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeNnStoreDlurRscvsDisable 1.3.6.1.4.1.18.3.5.14.1.1.44
Store RSCVs for DLUR sessions? (for network monitoring)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeNnDlurDisable 1.3.6.1.4.1.18.3.5.14.1.1.45
This enables DLUR support for the Node
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeTotalAvailableMemory 1.3.6.1.4.1.18.3.5.14.1.1.46
Total memory available to APPN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeInUseMemory 1.3.6.1.4.1.18.3.5.14.1.1.47
Memory in use by APPN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeMemoryWarningThreshold 1.3.6.1.4.1.18.3.5.14.1.1.48
Warning memory threshold
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeMemoryCriticalThreshold 1.3.6.1.4.1.18.3.5.14.1.1.49
Critical memory threshold
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeHprDisable 1.3.6.1.4.1.18.3.5.14.1.1.50
This enables HPR support for the Node
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeHprPathSwitchCtrlrDisable 1.3.6.1.4.1.18.3.5.14.1.1.51
This enables HPR Path Switch Controller support for the Node
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeDebugIpsTraceDisable 1.3.6.1.4.1.18.3.5.14.1.1.52
This enables tracing of internal messages for debugging
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeDebugIpsTraceSize 1.3.6.1.4.1.18.3.5.14.1.1.53
This specifies the size of the IPS trace file for debugging
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnNodeDefaultDlusName 1.3.6.1.4.1.18.3.5.14.1.1.54
Fully-qualified name of the default primary DLUS node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeDefaultBackupDlusName 1.3.6.1.4.1.18.3.5.14.1.1.55
Fully-qualified name of the default backup DLUS node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodePdLogDisable 1.3.6.1.4.1.18.3.5.14.1.1.56
This enables logging of problem determination messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeDlusRetryTimeout 1.3.6.1.4.1.18.3.5.14.1.1.57
This controls the timeout between retying pipe to the DLUS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..90  

wfAppnNodeDlusRetryLimit 1.3.6.1.4.1.18.3.5.14.1.1.58
This controls the nubmer of retries for the pipe to the DLUS; 65535 means forever
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..65535  

wfAppnNodeSoloistSlotNum 1.3.6.1.4.1.18.3.5.14.1.1.59
Indicates the slot which runs the appn_cp soloist
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

wfAppnNodeBrNNSupport 1.3.6.1.4.1.18.3.5.14.1.1.60
Enables the BrNN support for this node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeRegisterWithNN 1.3.6.1.4.1.18.3.5.14.1.1.61
Used for BrNN only. Indicates whether the resources will be registered with the NNS. When register_local is selected only local LUs ( not domain-served ) will be registered. The NNS will forward all the broadcast searches to the Node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), all(2), local(3)  

wfAppnNodeBranchAwarenessEnable 1.3.6.1.4.1.18.3.5.14.1.1.62
Indicates whether the TG between the local Node and served BrNNs will appear in the topology database
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeDlcTable 1.3.6.1.4.1.18.3.5.14.1.2
this table contains entries for each DLC configured for APPN use
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeDlcEntry

wfAppnNodeDlcEntry 1.3.6.1.4.1.18.3.5.14.1.2.1
An entry in wfAppnNodeDlcTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeDlcEntry  

wfAppnNodeDlcDelete 1.3.6.1.4.1.18.3.5.14.1.2.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLC definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnNodeDlcDisable 1.3.6.1.4.1.18.3.5.14.1.2.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this DLC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeDlcName 1.3.6.1.4.1.18.3.5.14.1.2.1.3
This is the 8-character name given to this DLC
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeDlcState 1.3.6.1.4.1.18.3.5.14.1.2.1.4
Indicates the current state of this DLC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendactive(2), active(3), pendinact(4)  

wfAppnNodeDlcType 1.3.6.1.4.1.18.3.5.14.1.2.1.5
This indicates the type of DLC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sdlc(1), srb(2), tb(3), fr(4), dls(5), qllc(6)  

wfAppnNodeDlcNegLsSupportDisable 1.3.6.1.4.1.18.3.5.14.1.2.1.6
This indicates if Link Station roles can be negotiated on this DLC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeDlcCct 1.3.6.1.4.1.18.3.5.14.1.2.1.7
This is the circuit used by this DLC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnNodeDlcData 1.3.6.1.4.1.18.3.5.14.1.2.1.8
comment - Is this used? -P2
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodePortTable 1.3.6.1.4.1.18.3.5.14.1.3
this table contains entries for each Port defined
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodePortEntry

wfAppnNodePortEntry 1.3.6.1.4.1.18.3.5.14.1.3.1
The Port Name is used as the index to this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodePortEntry  

wfAppnNodePortDelete 1.3.6.1.4.1.18.3.5.14.1.3.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Port definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnNodePortDisable 1.3.6.1.4.1.18.3.5.14.1.3.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodePortName 1.3.6.1.4.1.18.3.5.14.1.3.1.3
Administratively-assigned name for this APPN port. The name can be from one to eight characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodePortState 1.3.6.1.4.1.18.3.5.14.1.3.1.4
Indicates the current state of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendactive(2), active(3), pendinact(4)  

wfAppnNodePortDlcType 1.3.6.1.4.1.18.3.5.14.1.3.1.5
Indicates the DLC type of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenring(6)  

wfAppnNodePortPortType 1.3.6.1.4.1.18.3.5.14.1.3.1.6
Identifies the type of line used by this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER leased(1), switched(2), fac(3)  

wfAppnNodePortSIMRIM 1.3.6.1.4.1.18.3.5.14.1.3.1.7
Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodePortLsRole 1.3.6.1.4.1.18.3.5.14.1.3.1.8
Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), negot(3), abm(4)  

wfAppnNodePortMaxRcvBtuSize 1.3.6.1.4.1.18.3.5.14.1.3.1.9
Maximum Basic Transmission Size (BTU) that a link station on this port can receive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 256..4105  

wfAppnNodePortMaxIframeWindow 1.3.6.1.4.1.18.3.5.14.1.3.1.10
Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

wfAppnNodePortDefLsGoodXids 1.3.6.1.4.1.18.3.5.14.1.3.1.11
The total number of successful XIDs that have occurred on all defined link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodePortDefLsBadXids 1.3.6.1.4.1.18.3.5.14.1.3.1.12
The total number of unsuccessful XIDs that have occurred on all defined link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodePortDynLsGoodXids 1.3.6.1.4.1.18.3.5.14.1.3.1.13
The total number of successful XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodePortDynLsBadXids 1.3.6.1.4.1.18.3.5.14.1.3.1.14
The total number of unsuccessful XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodePortDlcName 1.3.6.1.4.1.18.3.5.14.1.3.1.15
This is the 8-character name of the DLC which supports this Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodePortNumber 1.3.6.1.4.1.18.3.5.14.1.3.1.16
This is a unique number for this Port on the DLC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnNodePortTotLinkActLim 1.3.6.1.4.1.18.3.5.14.1.3.1.17
This specifies the maximum link activation limit for this Port. The maximum value depends on the LS Role and Port Type, as follows: Port Type LS Role Max Act Lim Inb Out Switched 1 1 1 Leased Secondary 1 1 0 Leased Negotiable 1 0 0 Leased Primary 256 0 256 SATF 256 128 128
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER neg(1), pri(256)  

wfAppnNodePortInbLinkActLim 1.3.6.1.4.1.18.3.5.14.1.3.1.18
This specifies the maximum inbound link activation limit for this Port. This value plus next one must total less than or equal to the total link activation limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sec(1), satf(128)  

wfAppnNodePortOutLinkActLim 1.3.6.1.4.1.18.3.5.14.1.3.1.19
This specifies the maximum outbound link activation limit for this Port. This value plus previous one must total less than or equal to the total link activation limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER switched(1), satf(128), pri(256)  

wfAppnNodePortActXidExchangeLimit 1.3.6.1.4.1.18.3.5.14.1.3.1.20
This specifies the maximum number of activation XIDs which will be sent before the Port is considered inoperable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER def(12)  

wfAppnNodePortNonActXidExchangeLimit 1.3.6.1.4.1.18.3.5.14.1.3.1.21
This specifies the maximum number of non-activation XIDs which will be sent before the Port is considered inoperable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER def(5)  

wfAppnNodePortLsXmitRcvCap 1.3.6.1.4.1.18.3.5.14.1.3.1.22
This specifies if the Port can receive Two-Way Simultaneous or Two-Way Alternate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tws(1), twa(2)  

wfAppnNodePortTargetPacingCount 1.3.6.1.4.1.18.3.5.14.1.3.1.23
This specifies the target pacing count for BINDs on this Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32767  

wfAppnNodePortMaxSendBtuSize 1.3.6.1.4.1.18.3.5.14.1.3.1.24
This specifies the Maximum BTU Size which can be sent out this Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 256..4105  

wfAppnNodePortImplicitCpSessions 1.3.6.1.4.1.18.3.5.14.1.3.1.25
This specifies whether CP-CP sessions are permitted with implicit link stations on this Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodePortImplicitLimResource 1.3.6.1.4.1.18.3.5.14.1.3.1.26
This specifies whether implicit link stations on this Port should be defined as limited resources
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodePortImplicitEffCap 1.3.6.1.4.1.18.3.5.14.1.3.1.27
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with TGs to implicit link stations on this Port. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodePortImplicitConnCost 1.3.6.1.4.1.18.3.5.14.1.3.1.28
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value for use with TGs to implicit link stations on this Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodePortImplicitByteCost 1.3.6.1.4.1.18.3.5.14.1.3.1.29
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value for use with TGs to implicit link stations on this Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodePortImplicitSecurity 1.3.6.1.4.1.18.3.5.14.1.3.1.30
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value for use with TGs to implicit link stations on this Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodePortImplicitDelay 1.3.6.1.4.1.18.3.5.14.1.3.1.31
Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value for use with TGs to implicit link stations on this Port. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnNodePortImplicitUsr1 1.3.6.1.4.1.18.3.5.14.1.3.1.32
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations on this Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodePortImplicitUsr2 1.3.6.1.4.1.18.3.5.14.1.3.1.33
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations on this Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodePortImplicitUsr3 1.3.6.1.4.1.18.3.5.14.1.3.1.34
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with TGs to implicit link stations on this Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodePortImplicitHprDisable 1.3.6.1.4.1.18.3.5.14.1.3.1.35
This specifies if HPR can be used with implicit link stations on this Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodePortImplicitHprLlErrorDisable 1.3.6.1.4.1.18.3.5.14.1.3.1.36
This specifies if Link-Level Error recovery is to be used on implicit link stations which support HPR on this Port. NOTE: This field does not enable/disable HPRs selective retransmission algorithm. HPR will perform selective retransmission on data whether or not error recovery is also done by the link level protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodePortImplicitLinkDeactTime 1.3.6.1.4.1.18.3.5.14.1.3.1.37
This indicates the time in seconds before implicit Link Stations on this Port will be deactivated if it is an HPR limited Resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..2147483647  

wfAppnNodePortDlcData 1.3.6.1.4.1.18.3.5.14.1.3.1.38
This specifies the local DLC address to be used by this port
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodePortHprDlcData 1.3.6.1.4.1.18.3.5.14.1.3.1.39
This specifies the HPR address to be used by this port
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodePortImplicitDlurDisable 1.3.6.1.4.1.18.3.5.14.1.3.1.40
This specifies if HPR can be used with implicit link stations on this Port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodePortImplicitUplinkToEN 1.3.6.1.4.1.18.3.5.14.1.3.1.41
For BrNN specifies whether the implicit Link Stations off this port are uplink or downlink if the adjacent node is an EN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsTable 1.3.6.1.4.1.18.3.5.14.1.4
This table contains detail information about link station configuration
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeLsEntry

wfAppnNodeLsEntry 1.3.6.1.4.1.18.3.5.14.1.4.1
An entry in wfAppnNodePortTable. This table is indexed by the link station name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeLsEntry  

wfAppnNodeLsDelete 1.3.6.1.4.1.18.3.5.14.1.4.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Link Station definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnNodeLsDisable 1.3.6.1.4.1.18.3.5.14.1.4.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Link Station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsName 1.3.6.1.4.1.18.3.5.14.1.4.1.3
Administratively-assigned name for the link station. The name can be from one to eight characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsPortName 1.3.6.1.4.1.18.3.5.14.1.4.1.4
Administratively-assigned name for the port. The name can be from one to eight characters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsState 1.3.6.1.4.1.18.3.5.14.1.4.1.5
State of this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendactive(2), active(3), pendinact(4)  

wfAppnNodeLsCpName 1.3.6.1.4.1.18.3.5.14.1.4.1.6
Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsTgNum 1.3.6.1.4.1.18.3.5.14.1.4.1.7
Number associated with the TG to this link station. Range ( 1 - 20) Predefined values for auto-activation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

wfAppnNodeLsLimResource 1.3.6.1.4.1.18.3.5.14.1.4.1.8
Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsMigration 1.3.6.1.4.1.18.3.5.14.1.4.1.9
Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a back-level node supporting XID0 protocols. 2 Indicates that this is an up-level node supporting XID3 protocols including the Network Name CV 3 Indicates that this is a back-level node supporting XID3 protocols (but does not include the Network Name CV) 4 Indicates that this is a back-level node which does not support XID protocols. (This is valid on NONSWITCHED ports, and is not valid on negotiable ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER xid0(1), uplevel(2), xid3(3), noxid(4)  

wfAppnNodeLsBlockNum 1.3.6.1.4.1.18.3.5.14.1.4.1.10
The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsIdNum 1.3.6.1.4.1.18.3.5.14.1.4.1.11
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsCpCpSession 1.3.6.1.4.1.18.3.5.14.1.4.1.12
Indicates whether CP-CP sessions are supported by this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsTargetPacingCount 1.3.6.1.4.1.18.3.5.14.1.4.1.13
Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

wfAppnNodeLsMaxSendBtuSize 1.3.6.1.4.1.18.3.5.14.1.4.1.14
Numeric value between 0 and 4105 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4105  

wfAppnNodeLsEffCap 1.3.6.1.4.1.18.3.5.14.1.4.1.15
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsConnCost 1.3.6.1.4.1.18.3.5.14.1.4.1.16
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsByteCost 1.3.6.1.4.1.18.3.5.14.1.4.1.17
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsSecurity 1.3.6.1.4.1.18.3.5.14.1.4.1.18
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsDelay 1.3.6.1.4.1.18.3.5.14.1.4.1.19
Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with the TG using this link station. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnNodeLsUsr1 1.3.6.1.4.1.18.3.5.14.1.4.1.20
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsUsr2 1.3.6.1.4.1.18.3.5.14.1.4.1.21
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsUsr3 1.3.6.1.4.1.18.3.5.14.1.4.1.22
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsCpType 1.3.6.1.4.1.18.3.5.14.1.4.1.23
This specifies the APPN Node type of Link Station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER learn(1), nn(2), en(3), bllen(4), hostxid3(5), hostxid0(6), dspuxid(7), dspunoxid(8)  

wfAppnNodeLsAutoActivateDisable 1.3.6.1.4.1.18.3.5.14.1.4.1.24
This specifies if the link should be automatically activated when the Port becomes active. Should be disabled if CP-CP sessions are enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsSolicitSscpSessionsDisable 1.3.6.1.4.1.18.3.5.14.1.4.1.25
This specifies if SSCP Sessions should be solicited from this Link Station
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsUseDefaultTgChars 1.3.6.1.4.1.18.3.5.14.1.4.1.26
Indicates whether the default TG characteristics specified for the Port should be used for this link station, or if explicit TG characteristics will be supplied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsLinkData 1.3.6.1.4.1.18.3.5.14.1.4.1.27
this for Link Address (MAC/SAP, SDLC Address)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeLsDlurDisable 1.3.6.1.4.1.18.3.5.14.1.4.1.28
This specifies if the adjacent Link Station is a node to be serviced by DLUR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsDspuName 1.3.6.1.4.1.18.3.5.14.1.4.1.29
8-byte name of the downstream PU supported by DLUR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsDlusName 1.3.6.1.4.1.18.3.5.14.1.4.1.30
Fully-qualified name of the DLUS node which will serve this DLUR Link Station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsBackupDlusName 1.3.6.1.4.1.18.3.5.14.1.4.1.31
Fully-qualified name of the backup DLUS node which may serve this DLUR Link Station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsHprDisable 1.3.6.1.4.1.18.3.5.14.1.4.1.32
This specifies if HPR is supported on this Link Station
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsHprLlErrorDisable 1.3.6.1.4.1.18.3.5.14.1.4.1.33
This specifies if Link-Level Error recovery is to be used on this link station. NOTE: This field does not enable/disable HPRs selective retransmission algorithm. HPR will perform selective retransmission on data whether or not error recovery is also done by the link level protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsLinkDeactTime 1.3.6.1.4.1.18.3.5.14.1.4.1.34
This indicates the time in seconds before this Link Station will be deactivated if it is an HPR limited Resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..2147483647  

wfAppnNodeLsLinkRetryCount 1.3.6.1.4.1.18.3.5.14.1.4.1.35
This indicates for how many times will APPN CP component retry to restart the link station before it gives up, 99 default is forever.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..99  

wfAppnNodeLsBranchLinkType 1.3.6.1.4.1.18.3.5.14.1.4.1.36
For BrNN specifies whether the link is an uplink or a downlink
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uplink(1), downlink(2)  

wfAppnNodeLsAdjBrNNLinkSupp 1.3.6.1.4.1.18.3.5.14.1.4.1.37
Specifies whether the adjacent node is required, allowed or prohibited from being a BrNN ( i.e. an BrNN showing its NN face ).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allowed(1), required(2), prohibited(3)  

wfAppnNodeLsDefaultNNS 1.3.6.1.4.1.18.3.5.14.1.4.1.38
This field can be set to yes to indicate that the adjacent CP is the preferred NN server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsStatusTable 1.3.6.1.4.1.18.3.5.14.1.5
This table contains detailed status information about link stations
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeLsStatusEntry

wfAppnNodeLsStatusEntry 1.3.6.1.4.1.18.3.5.14.1.5.1
An entry in wfAppnNodeLsStatusTable. This table is indexed by the link station name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeLsStatusEntry  

wfAppnNodeLsStatusName 1.3.6.1.4.1.18.3.5.14.1.5.1.1
Administratively-assigned name for the link station. The name can be from one to eight characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsStatusPortName 1.3.6.1.4.1.18.3.5.14.1.5.1.2
Administratively-assigned name for the port. The name can be from one to eight characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsStatusDlcType 1.3.6.1.4.1.18.3.5.14.1.5.1.3
The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenring(6)  

wfAppnNodeLsStatusDynamic 1.3.6.1.4.1.18.3.5.14.1.5.1.4
Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish a connection with this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeLsStatusState 1.3.6.1.4.1.18.3.5.14.1.5.1.5
State of this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendactive(2), active(3), pendinact(4)  

wfAppnNodeLsStatusCpName 1.3.6.1.4.1.18.3.5.14.1.5.1.6
Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsStatusTgNum 1.3.6.1.4.1.18.3.5.14.1.5.1.7
Number associated with the TG to this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusLimResource 1.3.6.1.4.1.18.3.5.14.1.5.1.8
Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsStatusMigration 1.3.6.1.4.1.18.3.5.14.1.5.1.9
Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a back-level node supporting XID0 protocols. 2 Indicates that this is an up-level node supporting XID3 protocols including the Network Name CV 3 Indicates that this is a back-level node supporting XID3 protocols (but does not include the Network Name CV) 4 Indicates that this is a back-level node which does not support XID protocols. (This is valid on NONSWITCHED ports, and is not valid on negotiable ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER xid0(1), uplevel(2), xid3(3), noxid(4)  

wfAppnNodeLsStatusBlockNum 1.3.6.1.4.1.18.3.5.14.1.5.1.10
The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsStatusIdNum 1.3.6.1.4.1.18.3.5.14.1.5.1.11
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeLsStatusCpCpSession 1.3.6.1.4.1.18.3.5.14.1.5.1.12
Indicates whether CP-CP sessions are supported by this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsStatusTargetPacingCount 1.3.6.1.4.1.18.3.5.14.1.5.1.13
Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusMaxSendBtuSize 1.3.6.1.4.1.18.3.5.14.1.5.1.14
Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusEffCap 1.3.6.1.4.1.18.3.5.14.1.5.1.15
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsStatusConnCost 1.3.6.1.4.1.18.3.5.14.1.5.1.16
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsStatusByteCost 1.3.6.1.4.1.18.3.5.14.1.5.1.17
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsStatusSecurity 1.3.6.1.4.1.18.3.5.14.1.5.1.18
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsStatusDelay 1.3.6.1.4.1.18.3.5.14.1.5.1.19
Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with the TG using this link station. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnNodeLsStatusUsr1 1.3.6.1.4.1.18.3.5.14.1.5.1.20
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsStatusUsr2 1.3.6.1.4.1.18.3.5.14.1.5.1.21
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsStatusUsr3 1.3.6.1.4.1.18.3.5.14.1.5.1.22
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeLsStatusInXidBytes 1.3.6.1.4.1.18.3.5.14.1.5.1.23
Number of XID bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusInMsgBytes 1.3.6.1.4.1.18.3.5.14.1.5.1.24
Number of message (I-frame) bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusInXidFrames 1.3.6.1.4.1.18.3.5.14.1.5.1.25
Number of XID frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusInMsgFrames 1.3.6.1.4.1.18.3.5.14.1.5.1.26
Number of message (I-frame) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusOutXidBytes 1.3.6.1.4.1.18.3.5.14.1.5.1.27
Number of XID bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusOutMsgBytes 1.3.6.1.4.1.18.3.5.14.1.5.1.28
Number of message (I-frame) bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusOutXidFrames 1.3.6.1.4.1.18.3.5.14.1.5.1.29
Number of XID frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusOutMsgFrames 1.3.6.1.4.1.18.3.5.14.1.5.1.30
Number of message (I-frame) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusEchoRsps 1.3.6.1.4.1.18.3.5.14.1.5.1.31
Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent nodes periodically to verify connectivity and to measure that actual round trip time, that is the time the test frame is sent until the response is received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusCurrentDelay 1.3.6.1.4.1.18.3.5.14.1.5.1.32
The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusMaxDelay 1.3.6.1.4.1.18.3.5.14.1.5.1.33
The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusMinDelay 1.3.6.1.4.1.18.3.5.14.1.5.1.34
The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusMaxDelayTime 1.3.6.1.4.1.18.3.5.14.1.5.1.35
The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to the last initialization of the APPN node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusGoodXids 1.3.6.1.4.1.18.3.5.14.1.5.1.36
The total number of successful XIDs that have occurred on this link station since the time it was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusBadXids 1.3.6.1.4.1.18.3.5.14.1.5.1.37
The total number of unsuccessful XIDs that have occurred on this link station since the time it was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusActiveSessions 1.3.6.1.4.1.18.3.5.14.1.5.1.38
Number of Active Sessions (Endpoint and ISR) using this Link Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusInvalidSnaFrames 1.3.6.1.4.1.18.3.5.14.1.5.1.39
Number of Invalid SNA Frames received from this Link Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusInScFrames 1.3.6.1.4.1.18.3.5.14.1.5.1.40
Number of Session Control frames received from this Link Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusOutScFrames 1.3.6.1.4.1.18.3.5.14.1.5.1.41
Number of Session Control frames sent to the Link Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeLsStatusCpType 1.3.6.1.4.1.18.3.5.14.1.5.1.42
This specifies the APPN Node type of Link Station
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER learn(1), nn(2), en(3), bllen(4), hostxid3(5), hostxid0(6), dspuxid(7), dspunoxid(8)  

wfAppnNodeLsStatusStartTime 1.3.6.1.4.1.18.3.5.14.1.5.1.43
Time since system startup (in hundreths of seconds) when Link Station was activated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusStopTime 1.3.6.1.4.1.18.3.5.14.1.5.1.44
Time since system startup (in hundreths of seconds) when Link Station was deactivated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusUpTime 1.3.6.1.4.1.18.3.5.14.1.5.1.45
Time (in hundreths of seconds) that this Link Station has been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusDeactCause 1.3.6.1.4.1.18.3.5.14.1.5.1.46
Deactivation Cause
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusHprSupport 1.3.6.1.4.1.18.3.5.14.1.5.1.47
Indicates if HPR is supported by this Link Station
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsStatusHprLlErrSupport 1.3.6.1.4.1.18.3.5.14.1.5.1.48
Indicates if HPR Link-level Error recovery is supported by this Link Station
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeLsStatusAnrLabel 1.3.6.1.4.1.18.3.5.14.1.5.1.49
ANR Label of this Link Station
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeLsStatusLinkData 1.3.6.1.4.1.18.3.5.14.1.5.1.50
Link Address, e.g.Mac Address/SAP
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeCnTable 1.3.6.1.4.1.18.3.5.14.1.6
This Table contains entries for each configured Connection Network
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeCnEntry

wfAppnNodeCnEntry 1.3.6.1.4.1.18.3.5.14.1.6.1
An entry in wfAppnNodeCnTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeCnEntry  

wfAppnNodeCnDelete 1.3.6.1.4.1.18.3.5.14.1.6.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Connection Network definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnNodeCnDisable 1.3.6.1.4.1.18.3.5.14.1.6.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Connection Network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeCnFqName 1.3.6.1.4.1.18.3.5.14.1.6.1.3
The Fully-qualified name of the Connection Network
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeCnState 1.3.6.1.4.1.18.3.5.14.1.6.1.4
State of this connection network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendactive(2), active(3), pendinact(4)  

wfAppnNodeCnEffCap 1.3.6.1.4.1.18.3.5.14.1.6.1.5
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this connection network. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeCnConnCost 1.3.6.1.4.1.18.3.5.14.1.6.1.6
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeCnByteCost 1.3.6.1.4.1.18.3.5.14.1.6.1.7
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeCnSecurity 1.3.6.1.4.1.18.3.5.14.1.6.1.8
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeCnDelay 1.3.6.1.4.1.18.3.5.14.1.6.1.9
Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this connection network. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnNodeCnUsr1 1.3.6.1.4.1.18.3.5.14.1.6.1.10
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeCnUsr2 1.3.6.1.4.1.18.3.5.14.1.6.1.11
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeCnUsr3 1.3.6.1.4.1.18.3.5.14.1.6.1.12
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNodeCnPortTable 1.3.6.1.4.1.18.3.5.14.1.7
Table containing an entry for every Port associated with a connection network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeCnPortEntry

wfAppnNodeCnPortEntry 1.3.6.1.4.1.18.3.5.14.1.7.1
an entry in wfAppnNodeCnPortTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeCnPortEntry  

wfAppnNodeCnPortDelete 1.3.6.1.4.1.18.3.5.14.1.7.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Connection Network Port instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnNodeCnPortDisable 1.3.6.1.4.1.18.3.5.14.1.7.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Connection Network Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeCnPortCnName 1.3.6.1.4.1.18.3.5.14.1.7.1.3
The name of the cn.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeCnPortPortName 1.3.6.1.4.1.18.3.5.14.1.7.1.4
The name of the port. FIX to READ_ONLY
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeCnPortState 1.3.6.1.4.1.18.3.5.14.1.7.1.5
State of this connection network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendactive(2), active(3), pendinact(4)  

wfAppnNodeIsrSessionTable 1.3.6.1.4.1.18.3.5.14.1.8
This table contains entries for every session that is currently being routed by this Node
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeIsrSessionEntry

wfAppnNodeIsrSessionEntry 1.3.6.1.4.1.18.3.5.14.1.8.1
The fqpcid is the index for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeIsrSessionEntry  

wfAppnNodeIsrSessionPcid 1.3.6.1.4.1.18.3.5.14.1.8.1.1
This is the PCID of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeIsrSessionFqCpName 1.3.6.1.4.1.18.3.5.14.1.8.1.2
This is the Fully-qualified CP name of the node assigning the PCID for this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeIsrSessionTransPriority 1.3.6.1.4.1.18.3.5.14.1.8.1.3
This indicates the transmission priority being used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), network(4)  

wfAppnNodeIsrSessionCos 1.3.6.1.4.1.18.3.5.14.1.8.1.4
This indicates the Class-of-Service being used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeIsrSessionLimResource 1.3.6.1.4.1.18.3.5.14.1.8.1.5
This indicates if this session is traversing a Limited Resource
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeIsrSessionRscv 1.3.6.1.4.1.18.3.5.14.1.8.1.6
This is the Route Selection Control Vector in use by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeIsrSessionPriSendRuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.7
This is the send RU size used on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriRcvRuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.8
This is the receive RU size used on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriMaxSendBtuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.9
This is the maximum send BTU size on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriMaxRcvBtuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.10
This is the maximum receive BTU size on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriMaxSendPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.11
This is the maximum send pacing on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriCurSendPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.12
This is the current send pacing on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriMaxRcvPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.13
This is the maximum receive pacing on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriCurRcvPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.14
This is the current receive pacing on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriSendFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.15
This is the number of Normal-flow frames sent on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionPriSendBytes 1.3.6.1.4.1.18.3.5.14.1.8.1.16
This is the number of bytes sent on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionPriSendFmdFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.17
This is the number of FMD frames sent on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionPriRcvFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.18
This is the number of Normal-flow frames received on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionPriRcvBytes 1.3.6.1.4.1.18.3.5.14.1.8.1.19
This is the number of bytes received on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionPriRcvFmdFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.20
This is the number of FMD frames received on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionPriSidh 1.3.6.1.4.1.18.3.5.14.1.8.1.21
This is the SIDH value used on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriSidl 1.3.6.1.4.1.18.3.5.14.1.8.1.22
This is the SIDL value used on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriOdai 1.3.6.1.4.1.18.3.5.14.1.8.1.23
This is the ODAI value used on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionPriLsName 1.3.6.1.4.1.18.3.5.14.1.8.1.24
This is the adjacent Link Station used on the primary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeIsrSessionSecSendRuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.25
This is the send RU size used on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecRcvRuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.26
This is the receive RU size used on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecMaxSendBtuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.27
This is the maximum send BTU size on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecMaxRcvBtuSize 1.3.6.1.4.1.18.3.5.14.1.8.1.28
This is the maximum receive BTU size on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecMaxSendPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.29
This is the maximum send pacing on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecCurSendPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.30
This is the current send pacing on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecMaxRcvPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.31
This is the maximum receive pacing on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecCurRcvPacing 1.3.6.1.4.1.18.3.5.14.1.8.1.32
This is the current receive pacing on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecSendFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.33
This is the number of Normal-flow frames sent on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionSecSendBytes 1.3.6.1.4.1.18.3.5.14.1.8.1.34
This is the number of bytes sent on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionSecSendFmdFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.35
This is the number of FMD frames sent on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionSecRcvFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.36
This is the number of Normal-flow frames received on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionSecRcvBytes 1.3.6.1.4.1.18.3.5.14.1.8.1.37
This is the number of bytes received on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionSecRcvFmdFrames 1.3.6.1.4.1.18.3.5.14.1.8.1.38
This is the number of FMD frames received on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeIsrSessionSecSidh 1.3.6.1.4.1.18.3.5.14.1.8.1.39
This is the SIDH value used on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecSidl 1.3.6.1.4.1.18.3.5.14.1.8.1.40
This is the SIDL value used on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecOdai 1.3.6.1.4.1.18.3.5.14.1.8.1.41
This is the ODAI value used on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeIsrSessionSecLsName 1.3.6.1.4.1.18.3.5.14.1.8.1.42
This is the adjacent Link Station used on the secondary hop of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeIsrSessionRscvText 1.3.6.1.4.1.18.3.5.14.1.8.1.43
This is the Route Selection Control Vector in use by this session, in a DSP_STR format
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeEndptSessionTable 1.3.6.1.4.1.18.3.5.14.1.9
This table contains entries for every endpoint session that is currently active on this Node
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeEndptSessionEntry

wfAppnNodeEndptSessionEntry 1.3.6.1.4.1.18.3.5.14.1.9.1
The fqpcid is the index for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeEndptSessionEntry  

wfAppnNodeEndptSessionId 1.3.6.1.4.1.18.3.5.14.1.9.1.1
This is the session ID of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeEndptSessionPcid 1.3.6.1.4.1.18.3.5.14.1.9.1.2
This is the PCID of this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeEndptSessionFqCpName 1.3.6.1.4.1.18.3.5.14.1.9.1.3
This is the Fully-qualified CP name of the node assigning the PCID for this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeEndptSessionFqPluName 1.3.6.1.4.1.18.3.5.14.1.9.1.4
This is the name of the Partner LU being used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeEndptSessionTransPriority 1.3.6.1.4.1.18.3.5.14.1.9.1.5
This indicates the transmission priority being used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), network(4)  

wfAppnNodeEndptSessionMode 1.3.6.1.4.1.18.3.5.14.1.9.1.6
This indicates the Mode being used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeEndptSessionCos 1.3.6.1.4.1.18.3.5.14.1.9.1.7
This indicates the Class-of-Service being used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeEndptSessionLimResource 1.3.6.1.4.1.18.3.5.14.1.9.1.8
This indicates if this session is traversing a Limited Resource
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNodeEndptSessionPolarity 1.3.6.1.4.1.18.3.5.14.1.9.1.9
This indicates whether the local LU was the BIND sender (Primary) or if the local LU was the BIND receiver (Secondary)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

wfAppnNodeEndptSessionContention 1.3.6.1.4.1.18.3.5.14.1.9.1.10
This indicates whether this session is a contention-winner or a contention-loser session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER conwinner(1), conloser(2)  

wfAppnNodeEndptSessionRscv 1.3.6.1.4.1.18.3.5.14.1.9.1.11
This is the Route Selection Control Vector in use by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeEndptSessionSendRuSize 1.3.6.1.4.1.18.3.5.14.1.9.1.12
This is the maximum RU size sent on this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionRcvRuSize 1.3.6.1.4.1.18.3.5.14.1.9.1.13
This is the maximum RU size received this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionMaxSendBtuSize 1.3.6.1.4.1.18.3.5.14.1.9.1.14
This is the maximum send BTU size for this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionMaxRcvBtuSize 1.3.6.1.4.1.18.3.5.14.1.9.1.15
This is the maximum receive BTU size for this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionMaxSendPacing 1.3.6.1.4.1.18.3.5.14.1.9.1.16
This is the maximum send pacing for this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionCurSendPacing 1.3.6.1.4.1.18.3.5.14.1.9.1.17
This is the current send pacing used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionMaxRcvPacing 1.3.6.1.4.1.18.3.5.14.1.9.1.18
This is the maximum receive pacing for this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionCurRcvPacing 1.3.6.1.4.1.18.3.5.14.1.9.1.19
This is the current receive pacing used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionSendFrames 1.3.6.1.4.1.18.3.5.14.1.9.1.20
This is the number of data frames sent by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeEndptSessionSendBytes 1.3.6.1.4.1.18.3.5.14.1.9.1.21
This is the number of data bytes sent by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeEndptSessionSendFmdFrames 1.3.6.1.4.1.18.3.5.14.1.9.1.22
This is the number of FMD frames sent by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeEndptSessionRcvFrames 1.3.6.1.4.1.18.3.5.14.1.9.1.23
This is the number of data frames received by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeEndptSessionRcvBytes 1.3.6.1.4.1.18.3.5.14.1.9.1.24
This is the number of bytes received by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeEndptSessionRcvFmdFrames 1.3.6.1.4.1.18.3.5.14.1.9.1.25
This is the number of FMD frames received by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeEndptSessionSidh 1.3.6.1.4.1.18.3.5.14.1.9.1.26
This is the number of bytes received by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionSidl 1.3.6.1.4.1.18.3.5.14.1.9.1.27
This is the SIDL value used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionOdai 1.3.6.1.4.1.18.3.5.14.1.9.1.28
This is the ODAI value used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeEndptSessionLsName 1.3.6.1.4.1.18.3.5.14.1.9.1.29
This is the adjacent Link Station used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeEndptSessionRscvText 1.3.6.1.4.1.18.3.5.14.1.9.1.30
This is a text string representing the RSCV used by this session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeTraceGroup 1.3.6.1.4.1.18.3.5.14.1.10
OBJECT IDENTIFIER    

wfAppnNodeTraceDelete 1.3.6.1.4.1.18.3.5.14.1.10.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Trace.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnNodeTraceDisable 1.3.6.1.4.1.18.3.5.14.1.10.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Trace.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnNodeTraceFile 1.3.6.1.4.1.18.3.5.14.1.10.3
This is the path and file name for the Trace file to be created
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnNodeRtpConnectionTable 1.3.6.1.4.1.18.3.5.14.1.11
This table contains entries for every RTP connection that is currently active on this Node
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNodeRtpConnectionEntry

wfAppnNodeRtpConnectionEntry 1.3.6.1.4.1.18.3.5.14.1.11.1
The fqpcid is the index for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNodeRtpConnectionEntry  

wfAppnNodeRtpConnectionName 1.3.6.1.4.1.18.3.5.14.1.11.1.1
This is the local name of the RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeRtpConnectionDestName 1.3.6.1.4.1.18.3.5.14.1.11.1.2
This is the fully-qualified name of the node at the other end of this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeRtpConnectionFirstHopLsName 1.3.6.1.4.1.18.3.5.14.1.11.1.3
This is the LS name of the first hop for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeRtpConnectionCosName 1.3.6.1.4.1.18.3.5.14.1.11.1.4
This is the Class-of-Service name for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNodeRtpConnectionMaxBtuSize 1.3.6.1.4.1.18.3.5.14.1.11.1.5
This is the maximum size (in bytes) of packets which can be carried by this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionLivenessTimer 1.3.6.1.4.1.18.3.5.14.1.11.1.6
This is the Liveness Timer (in seconds) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionLivenessTimeouts 1.3.6.1.4.1.18.3.5.14.1.11.1.7
This is the number Liveness Timeouts for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionLocalTcid 1.3.6.1.4.1.18.3.5.14.1.11.1.8
This is the Local TCID for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeRtpConnectionRemoteTcid 1.3.6.1.4.1.18.3.5.14.1.11.1.9
This is the remote TCID for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeRtpConnectionActiveSessions 1.3.6.1.4.1.18.3.5.14.1.11.1.10
This is the number of sessions currently active on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionSendBytes 1.3.6.1.4.1.18.3.5.14.1.11.1.11
This is the number of bytes that have been sent on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionSendPackets 1.3.6.1.4.1.18.3.5.14.1.11.1.12
This is the number of packets that have been sent on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionSendSessionControlFrames 1.3.6.1.4.1.18.3.5.14.1.11.1.13
This is the number of Session Control that have been sent on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionSendRate 1.3.6.1.4.1.18.3.5.14.1.11.1.14
This is the current sending rate (in Kbits per second) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfAppnNodeRtpConnectionMaxSendRate 1.3.6.1.4.1.18.3.5.14.1.11.1.15
This is the Maximum sending rate (in Kbits per second) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionMinSendRate 1.3.6.1.4.1.18.3.5.14.1.11.1.16
This is the Minimum sending rate (in Kbits per second) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionRcvBytes 1.3.6.1.4.1.18.3.5.14.1.11.1.17
This is the number of bytes that have been received on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionRcvPackets 1.3.6.1.4.1.18.3.5.14.1.11.1.18
This is the number of packets that have been received on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionRcvSessionControlFrames 1.3.6.1.4.1.18.3.5.14.1.11.1.19
This is the number of Session Control that have been received on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionRcvInvalidSnaFrames 1.3.6.1.4.1.18.3.5.14.1.11.1.20
This is the number of invalid SNA frames that have been received on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionRcvRate 1.3.6.1.4.1.18.3.5.14.1.11.1.21
This is the current receiving rate (in Kbits per second) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfAppnNodeRtpConnectionMaxRcvRate 1.3.6.1.4.1.18.3.5.14.1.11.1.22
This is the Maximum receive rate (in Kbits per second) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionMinRcvRate 1.3.6.1.4.1.18.3.5.14.1.11.1.23
This is the Minimum receive rate (in Kbits per second) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionDiscardedBytes 1.3.6.1.4.1.18.3.5.14.1.11.1.24
This is the number of bytes that have been discarded on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionDiscardedPackets 1.3.6.1.4.1.18.3.5.14.1.11.1.25
This is the number of packets that have been discarded on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionResentBytes 1.3.6.1.4.1.18.3.5.14.1.11.1.26
This is the number of bytes that have been retransmitted this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionResentPackets 1.3.6.1.4.1.18.3.5.14.1.11.1.27
This is the number of packets that have been retransmitted this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionUpTime 1.3.6.1.4.1.18.3.5.14.1.11.1.28
This is the time (in seconds) that this RTP connection has been active
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionRoundTripTime 1.3.6.1.4.1.18.3.5.14.1.11.1.29
This is the last round-trip time (in milliseconds) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionSmoothRoundTripTime 1.3.6.1.4.1.18.3.5.14.1.11.1.30
This is the smoothed round-trip time (in milliseconds) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionBurstSize 1.3.6.1.4.1.18.3.5.14.1.11.1.31
This is the current burst size for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionSrtExpiries 1.3.6.1.4.1.18.3.5.14.1.11.1.32
This is the number of times the SR Timer has expired on this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionShortReqTimer 1.3.6.1.4.1.18.3.5.14.1.11.1.33
This is the SHORT_REQ timer duration (in seconds) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNodeRtpConnectionGapsDetected 1.3.6.1.4.1.18.3.5.14.1.11.1.34
This is the number of gaps detected for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNodeRtpConnectionRscv 1.3.6.1.4.1.18.3.5.14.1.11.1.35
This is the RSCV (in hex) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNodeRtpConnectionRscvText 1.3.6.1.4.1.18.3.5.14.1.11.1.36
This is the RSCV (in a human-readable format) for this RTP connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnTopo 1.3.6.1.4.1.18.3.5.14.2.1
OBJECT IDENTIFIER    

wfAppnNnTopoMaxNodes 1.3.6.1.4.1.18.3.5.14.2.1.1
Maximum number of nodes allowed in the APPN topology database This administratively assigned value must be equal to or greater than the maximum total number of end nodes and network nodes. If the number of nodes exceeds this value, APPN will issue an Alert and the node can no longer participate as a network node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTopoCurNumNodes 1.3.6.1.4.1.18.3.5.14.2.1.2
Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is issued.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTopoInTdus 1.3.6.1.4.1.18.3.5.14.2.1.3
Total number of TDUs received from all adjacent NN since last initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoOutTdus 1.3.6.1.4.1.18.3.5.14.2.1.4
Total number of TDUs built by this node to be sent to all adjacent NN since last initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodeLowRsns 1.3.6.1.4.1.18.3.5.14.2.1.5
Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the adjacent node that sent this low RSN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodeEqualRsns 1.3.6.1.4.1.18.3.5.14.2.1.6
Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodeGoodHighRsns 1.3.6.1.4.1.18.3.5.14.2.1.7
Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes. It is not required to send a TDU to the sender of this update because that node already has the update.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodeBadHighRsns 1.3.6.1.4.1.18.3.5.14.2.1.8
Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodeStateUpdates 1.3.6.1.4.1.18.3.5.14.2.1.9
Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodeErrors 1.3.6.1.4.1.18.3.5.14.2.1.10
Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodeTimerUpdates 1.3.6.1.4.1.18.3.5.14.2.1.11
Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoNodePurges 1.3.6.1.4.1.18.3.5.14.2.1.12
Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants kept in the network topology.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgLowRsns 1.3.6.1.4.1.18.3.5.14.2.1.13
Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the sender of the low RSN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgEqualRsns 1.3.6.1.4.1.18.3.5.14.2.1.14
Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgGoodHighRsns 1.3.6.1.4.1.18.3.5.14.2.1.15
Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting the update to all adjacent network nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgBadHighRsns 1.3.6.1.4.1.18.3.5.14.2.1.16
Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgStateUpdates 1.3.6.1.4.1.18.3.5.14.2.1.17
Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgErrors 1.3.6.1.4.1.18.3.5.14.2.1.18
Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgTimerUpdates 1.3.6.1.4.1.18.3.5.14.2.1.19
Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTgPurges 1.3.6.1.4.1.18.3.5.14.2.1.20
Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants to keep in the network topology.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTotalRouteCalcs 1.3.6.1.4.1.18.3.5.14.2.1.21
Number of routes calculated for all class of services since the last initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnTopoTotalRouteRejs 1.3.6.1.4.1.18.3.5.14.2.1.22
Number of route requests for all class of services that could not be calculated since last initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnNnAdjNodeTable 1.3.6.1.4.1.18.3.5.14.2.2
Table containing an entry for every adjacent node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and a gauge that indicates the number of outstanding TDUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNnAdjNodeEntry

wfAppnNnAdjNodeEntry 1.3.6.1.4.1.18.3.5.14.2.2.1
The adjacent node name is the index for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNnAdjNodeEntry  

wfAppnNnAdjNodeAdjName 1.3.6.1.4.1.18.3.5.14.2.2.1.1
An administratively-assigned fully-qualified name of this node's adjacent network node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnAdjNodeCpCpSessStatus 1.3.6.1.4.1.18.3.5.14.2.2.1.2
Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Inactive indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessons are active using both the ConWinner and ConLoser sessions. The session initiated by this node is referred to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoserr session is initiated by the adjacent node and is used by this node to receive from the adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), loser(2), winner(3), inactive(4)  

wfAppnNnAdjNodeOutOfSeqTdus 1.3.6.1.4.1.18.3.5.14.2.2.1.3
Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the network environment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfAppnNnAdjNodeLastFrsnSent 1.3.6.1.4.1.18.3.5.14.2.2.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnAdjNodeLastFrsnRcvd 1.3.6.1.4.1.18.3.5.14.2.2.1.5
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTopologyTable 1.3.6.1.4.1.18.3.5.14.2.3.1
Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNnTopologyEntry

wfAppnNnTopologyEntry 1.3.6.1.4.1.18.3.5.14.2.3.1.1
The fully-qualified node name is used to index this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNnTopologyEntry  

wfAppnNnNodeName 1.3.6.1.4.1.18.3.5.14.2.3.1.1.1
Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnNodeFrsn 1.3.6.1.4.1.18.3.5.14.2.3.1.1.2
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeEntryTimeLeft 1.3.6.1.4.1.18.3.5.14.2.3.1.1.3
Number of days before deletion of this network node entry. Range is 0-31.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeType 1.3.6.1.4.1.18.3.5.14.2.3.1.1.4
Type of APPN node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nn(1), vn(3)  

wfAppnNnNodeRsn 1.3.6.1.4.1.18.3.5.14.2.3.1.1.5
Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeRouteAddResist 1.3.6.1.4.1.18.3.5.14.2.3.1.1.6
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeCongested 1.3.6.1.4.1.18.3.5.14.2.3.1.1.7
Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeIsrDepleted 1.3.6.1.4.1.18.3.5.14.2.3.1.1.8
Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeEndptDepleted 1.3.6.1.4.1.18.3.5.14.2.3.1.1.9
Indicates whether session endpoint resources are depleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeQuiescing 1.3.6.1.4.1.18.3.5.14.2.3.1.1.10
Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeGateway 1.3.6.1.4.1.18.3.5.14.2.3.1.1.11
Indicates whether the node provide gateway functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeCentralDirectory 1.3.6.1.4.1.18.3.5.14.2.3.1.1.12
Indicates whether the node is central directory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeIsr 1.3.6.1.4.1.18.3.5.14.2.3.1.1.13
Indicates whether the node supports intermediate session routing (ISR).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeChainSupport 1.3.6.1.4.1.18.3.5.14.2.3.1.1.14
Indicates whether this node supports chaining.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeHprBase 1.3.6.1.4.1.18.3.5.14.2.3.1.1.15
Indicates whether this node supports HPR base functionality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeRtpTower 1.3.6.1.4.1.18.3.5.14.2.3.1.1.16
Indicates whether this node supports RTP tower functionality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnTgTopologyTable 1.3.6.1.4.1.18.3.5.14.2.3.2
Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNnTgTopologyEntry

wfAppnNnTgTopologyEntry 1.3.6.1.4.1.18.3.5.14.2.3.2.1
This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNnTgTopologyEntry  

wfAppnNnTgOwner 1.3.6.1.4.1.18.3.5.14.2.3.2.1.1
Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnTgDest 1.3.6.1.4.1.18.3.5.14.2.3.2.1.2
Administratively-assigned fully-qualified network name for the destination node for this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnTgNum 1.3.6.1.4.1.18.3.5.14.2.3.2.1.3
Number associated with this transmission group. Range is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFrsn 1.3.6.1.4.1.18.3.5.14.2.3.2.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgEntryTimeLeft 1.3.6.1.4.1.18.3.5.14.2.3.2.1.5
Number of days before deletion of this network node TG entry. Range is 0-31.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgDestVirtual 1.3.6.1.4.1.18.3.5.14.2.3.2.1.6
Indicates whether the destination node is a virtual node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgDlcData 1.3.6.1.4.1.18.3.5.14.2.3.2.1.7
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNnTgRsn 1.3.6.1.4.1.18.3.5.14.2.3.2.1.8
Current owning node's resource sequence number for this resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgOperational 1.3.6.1.4.1.18.3.5.14.2.3.2.1.9
Indicates whether the transmission group is operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgQuiescing 1.3.6.1.4.1.18.3.5.14.2.3.2.1.10
Indicates whether the transmission group is quiescing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgCpCpSession 1.3.6.1.4.1.18.3.5.14.2.3.2.1.11
Indicates whether CP-CP sessions are supported on this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgEffCap 1.3.6.1.4.1.18.3.5.14.2.3.2.1.12
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNnTgConnCost 1.3.6.1.4.1.18.3.5.14.2.3.2.1.13
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgByteCost 1.3.6.1.4.1.18.3.5.14.2.3.2.1.14
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgSecurity 1.3.6.1.4.1.18.3.5.14.2.3.2.1.15
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNnTgDelay 1.3.6.1.4.1.18.3.5.14.2.3.2.1.16
Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this TG. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnNnTgModemClass 1.3.6.1.4.1.18.3.5.14.2.3.2.1.17
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgUsr1 1.3.6.1.4.1.18.3.5.14.2.3.2.1.18
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgUsr2 1.3.6.1.4.1.18.3.5.14.2.3.2.1.19
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgUsr3 1.3.6.1.4.1.18.3.5.14.2.3.2.1.20
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgHprBase 1.3.6.1.4.1.18.3.5.14.2.3.2.1.21
Indicates whether HPR base functionality is supported on this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgRtpTower 1.3.6.1.4.1.18.3.5.14.2.3.2.1.22
Indicates whether RTP Tower functionality is supported on this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTopologyFRTable 1.3.6.1.4.1.18.3.5.14.2.3.3
Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNnTopologyFREntry

wfAppnNnTopologyFREntry 1.3.6.1.4.1.18.3.5.14.2.3.3.1
The fully-qualified node name is used to index this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNnTopologyFREntry  

wfAppnNnNodeFRName 1.3.6.1.4.1.18.3.5.14.2.3.3.1.1
Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnNodeFRFrsn 1.3.6.1.4.1.18.3.5.14.2.3.3.1.2
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeFREntryTimeLeft 1.3.6.1.4.1.18.3.5.14.2.3.3.1.3
Number of days before deletion of this network node entry. Range is 0-31.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeFRType 1.3.6.1.4.1.18.3.5.14.2.3.3.1.4
Type of APPN node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nn(1), vn(3)  

wfAppnNnNodeFRRsn 1.3.6.1.4.1.18.3.5.14.2.3.3.1.5
Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeFRRouteAddResist 1.3.6.1.4.1.18.3.5.14.2.3.3.1.6
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnNodeFRCongested 1.3.6.1.4.1.18.3.5.14.2.3.3.1.7
Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRIsrDepleted 1.3.6.1.4.1.18.3.5.14.2.3.3.1.8
Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFREndptDepleted 1.3.6.1.4.1.18.3.5.14.2.3.3.1.9
Indicates whether session endpoint resources are depleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRQuiescing 1.3.6.1.4.1.18.3.5.14.2.3.3.1.10
Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRGateway 1.3.6.1.4.1.18.3.5.14.2.3.3.1.11
Indicates whether the node provide gateway functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRCentralDirectory 1.3.6.1.4.1.18.3.5.14.2.3.3.1.12
Indicates whether the node is central directory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRIsr 1.3.6.1.4.1.18.3.5.14.2.3.3.1.13
Indicates whether the node supports intermediate session routing (ISR).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRChainSupport 1.3.6.1.4.1.18.3.5.14.2.3.3.1.14
Indicates whether this node supports chaining.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRHprBase 1.3.6.1.4.1.18.3.5.14.2.3.3.1.15
Indicates whether this node supports HPR base functionality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnNodeFRRtpTower 1.3.6.1.4.1.18.3.5.14.2.3.3.1.16
Indicates whether this node supports RTP tower functionality.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnNnTgTopologyFRTable 1.3.6.1.4.1.18.3.5.14.2.3.4
This table contains entries which describes the TGs associated with the Network Nodes in the network
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnNnTgTopologyFREntry

wfAppnNnTgTopologyFREntry 1.3.6.1.4.1.18.3.5.14.2.3.4.1
This table requires four indexes to provide a unique index. The indexes are the FRSN, the owning or originating CPname, the destination CPname, and the TG number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnNnTgTopologyFREntry  

wfAppnNnTgFROwner 1.3.6.1.4.1.18.3.5.14.2.3.4.1.1
Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnTgFRDest 1.3.6.1.4.1.18.3.5.14.2.3.4.1.2
Administratively-assigned fully-qualified network name for the destination node for this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnNnTgFRNum 1.3.6.1.4.1.18.3.5.14.2.3.4.1.3
Number associated with this transmission group. Range is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRFrsn 1.3.6.1.4.1.18.3.5.14.2.3.4.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFREntryTimeLeft 1.3.6.1.4.1.18.3.5.14.2.3.4.1.5
Number of days before deletion of this network node TG entry. Range is 0-31.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRDestVirtual 1.3.6.1.4.1.18.3.5.14.2.3.4.1.6
Indicates whether the destination node is a virtual node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRDlcData 1.3.6.1.4.1.18.3.5.14.2.3.4.1.7
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnNnTgFRRsn 1.3.6.1.4.1.18.3.5.14.2.3.4.1.8
Current owning node's resource sequence number for this resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFROperational 1.3.6.1.4.1.18.3.5.14.2.3.4.1.9
Indicates whether the transmission group is operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRQuiescing 1.3.6.1.4.1.18.3.5.14.2.3.4.1.10
Indicates whether the transmission group is quiescing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRCpCpSession 1.3.6.1.4.1.18.3.5.14.2.3.4.1.11
Indicates whether CP-CP sessions are supported on this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFREffCap 1.3.6.1.4.1.18.3.5.14.2.3.4.1.12
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNnTgFRConnCost 1.3.6.1.4.1.18.3.5.14.2.3.4.1.13
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRByteCost 1.3.6.1.4.1.18.3.5.14.2.3.4.1.14
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRSecurity 1.3.6.1.4.1.18.3.5.14.2.3.4.1.15
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnNnTgFRDelay 1.3.6.1.4.1.18.3.5.14.2.3.4.1.16
Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned value associated with this TG. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnNnTgFRModemClass 1.3.6.1.4.1.18.3.5.14.2.3.4.1.17
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRUsr1 1.3.6.1.4.1.18.3.5.14.2.3.4.1.18
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRUsr2 1.3.6.1.4.1.18.3.5.14.2.3.4.1.19
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRUsr3 1.3.6.1.4.1.18.3.5.14.2.3.4.1.20
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRHprBase 1.3.6.1.4.1.18.3.5.14.2.3.4.1.21
Indicates whether HPR base functionality is supported on this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnNnTgFRRtpTower 1.3.6.1.4.1.18.3.5.14.2.3.4.1.22
Indicates whether RTP Tower functionality is supported on this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalInfo 1.3.6.1.4.1.18.3.5.14.3.1.1
OBJECT IDENTIFIER    

wfAppnLocalNodeName 1.3.6.1.4.1.18.3.5.14.3.1.1.1
Administratively-assigned network name for this node in the format NETID.CPNAME.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnLocalNodeType 1.3.6.1.4.1.18.3.5.14.3.1.1.2
Type of APPN node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nn(1), en(2), len(4)  

wfAppnLocalNnRsn 1.3.6.1.4.1.18.3.5.14.3.1.1.3
Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalNnRouteAddResist 1.3.6.1.4.1.18.3.5.14.3.1.1.4
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalNnCongested 1.3.6.1.4.1.18.3.5.14.3.1.1.5
Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnIsrDepleted 1.3.6.1.4.1.18.3.5.14.3.1.1.6
Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnEndptDepleted 1.3.6.1.4.1.18.3.5.14.3.1.1.7
Indicates whether session endpoint resources are depleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnQuiescing 1.3.6.1.4.1.18.3.5.14.3.1.1.8
Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnGateway 1.3.6.1.4.1.18.3.5.14.3.1.1.9
Indicates whether the node provide gateway functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnCentralDirectory 1.3.6.1.4.1.18.3.5.14.3.1.1.10
Indicates whether the node is central directory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnIsr 1.3.6.1.4.1.18.3.5.14.3.1.1.11
Indicates whether the node supports intermediate session routing (ISR).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnChainSupport 1.3.6.1.4.1.18.3.5.14.3.1.1.12
Indicates whether the node supports chaining.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnLocalNnFrsn 1.3.6.1.4.1.18.3.5.14.3.1.1.13
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgTable 1.3.6.1.4.1.18.3.5.14.3.1.3
TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnLocalTgEntry

wfAppnLocalTgEntry 1.3.6.1.4.1.18.3.5.14.3.1.3.1
This table is indexed by the destination CPname and the TG number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnLocalTgEntry  

wfAppnLocalTgDest 1.3.6.1.4.1.18.3.5.14.3.1.3.1.1
Administratively-assigned fully-qualified network name for the destination node for this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnLocalTgNum 1.3.6.1.4.1.18.3.5.14.3.1.3.1.2
Number associated with this transmission group. Range is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgDestVirtual 1.3.6.1.4.1.18.3.5.14.3.1.3.1.3
Indicates whether the destination node is a virtual node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgDlcData 1.3.6.1.4.1.18.3.5.14.3.1.3.1.4
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnLocalTgRsn 1.3.6.1.4.1.18.3.5.14.3.1.3.1.5
Current owning node's resource sequence number for this resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgOperational 1.3.6.1.4.1.18.3.5.14.3.1.3.1.6
Indicates whether the transmission group is operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgQuiescing 1.3.6.1.4.1.18.3.5.14.3.1.3.1.7
Indicates whether the transmission group is quiescing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgCpCpSession 1.3.6.1.4.1.18.3.5.14.3.1.3.1.8
Indicates whether CP-CP sessions are supported on this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgEffCap 1.3.6.1.4.1.18.3.5.14.3.1.3.1.9
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnLocalTgConnCost 1.3.6.1.4.1.18.3.5.14.3.1.3.1.10
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgByteCost 1.3.6.1.4.1.18.3.5.14.3.1.3.1.11
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgSecurity 1.3.6.1.4.1.18.3.5.14.3.1.3.1.12
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnLocalTgDelay 1.3.6.1.4.1.18.3.5.14.3.1.3.1.13
Relative amount of time that it takes for a signal to travel the length of the logical link, with a range of 0 through 255 with some of the more common values enumerated. This is an administratively assigned value associated with this TG. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnLocalTgModemClass 1.3.6.1.4.1.18.3.5.14.3.1.3.1.14
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgUsr1 1.3.6.1.4.1.18.3.5.14.3.1.3.1.15
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgUsr2 1.3.6.1.4.1.18.3.5.14.3.1.3.1.16
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnLocalTgUsr3 1.3.6.1.4.1.18.3.5.14.3.1.3.1.17
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnDirectoryPerformance 1.3.6.1.4.1.18.3.5.14.4.1
OBJECT IDENTIFIER    

wfAppnDirMaxCaches 1.3.6.1.4.1.18.3.5.14.4.1.1
Maximum number of cache entries allowed. This is an administratively assigned value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnDirCurCaches 1.3.6.1.4.1.18.3.5.14.4.1.2
Current number of cache entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfAppnDirCurHomeEntries 1.3.6.1.4.1.18.3.5.14.4.1.3
Current number of home entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfAppnDirRegEntries 1.3.6.1.4.1.18.3.5.14.4.1.4
Current number of registered entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfAppnDirInLocates 1.3.6.1.4.1.18.3.5.14.4.1.5
Number of directed locates received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDirInBcastLocates 1.3.6.1.4.1.18.3.5.14.4.1.6
Number of broadcast locates received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDirOutLocates 1.3.6.1.4.1.18.3.5.14.4.1.7
Number of directed locates sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDirOutBcastLocates 1.3.6.1.4.1.18.3.5.14.4.1.8
Number of broadcast locates sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDirNotFoundLocates 1.3.6.1.4.1.18.3.5.14.4.1.9
Number of directed locates returned with a 'not found'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDirNotFoundBcastLocates 1.3.6.1.4.1.18.3.5.14.4.1.10
Number of broadcast locates returned with a not found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDirLocateOutstands 1.3.6.1.4.1.18.3.5.14.4.1.11
Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfAppnDirTable 1.3.6.1.4.1.18.3.5.14.4.2
Table containing information about all known LUs and TPs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnDirEntry

wfAppnDirEntry 1.3.6.1.4.1.18.3.5.14.4.2.1
This table is indexed by the LU name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnDirEntry  

wfAppnDirLuName 1.3.6.1.4.1.18.3.5.14.4.2.1.1
Fully-qualified network LU name in the domain of the serving network node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDirServerName 1.3.6.1.4.1.18.3.5.14.4.2.1.2
Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDirLuOwnerName 1.3.6.1.4.1.18.3.5.14.4.2.1.3
Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDirLocation 1.3.6.1.4.1.18.3.5.14.4.2.1.4
Specifies the location of the LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), domain(2), xdomain(3)  

wfAppnDirType 1.3.6.1.4.1.18.3.5.14.4.2.1.5
Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU has previously been located by a broadcast search and the location information has been saved. 3 - Register The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER home(1), cache(2), registered(3)  

wfAppnDirWildCard 1.3.6.1.4.1.18.3.5.14.4.2.1.6
1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-blank portions of the LUNAME will be used for locating this LU. 4 - Full-wildcard means all LUNAMES will be directed to this LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), entry(2), partial(3), full(4)  

wfAppnDirDefineTable 1.3.6.1.4.1.18.3.5.14.4.3
this table contains entries which define Directory entries
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnDirDefineEntry

wfAppnDirDefineEntry 1.3.6.1.4.1.18.3.5.14.4.3.1
An entry in wfAppnDirDefineTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnDirDefineEntry  

wfAppnDirDefineDelete 1.3.6.1.4.1.18.3.5.14.4.3.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Directory Entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnDirDefineDisable 1.3.6.1.4.1.18.3.5.14.4.3.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Directory Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnDirDefineResourceName 1.3.6.1.4.1.18.3.5.14.4.3.1.3
This specifies the resource name in the local Directory
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDirDefineResourceType 1.3.6.1.4.1.18.3.5.14.4.3.1.4
This specifies the resource type in the local Directory
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lu(1), encp(2), nncp(3), wildcard(4)  

wfAppnDirDefineParentName 1.3.6.1.4.1.18.3.5.14.4.3.1.5
This specifies the name of the parent of the resource, if the resource is an LU
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnDirDefineParentType 1.3.6.1.4.1.18.3.5.14.4.3.1.6
This specifies the type of the parent of the resource, if the resource is an LU
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER encp(2), nncp(3)  

wfAppnCosModeTable 1.3.6.1.4.1.18.3.5.14.5.1
Table representing all of the defined mode names for this node. The table contains the matching COS name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnCosModeEntry

wfAppnCosModeEntry 1.3.6.1.4.1.18.3.5.14.5.1.1
This table is indexed by the Mode Name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnCosModeEntry  

wfAppnCosModeName 1.3.6.1.4.1.18.3.5.14.5.1.1.1
Administratively-assigned name for this mode entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnCosModeCosName 1.3.6.1.4.1.18.3.5.14.5.1.1.2
An administratively assigned name for this Class of Service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnCosNameTable 1.3.6.1.4.1.18.3.5.14.5.2
Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnCosNameEntry

wfAppnCosNameEntry 1.3.6.1.4.1.18.3.5.14.5.2.1
The COS name is the index to this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnCosNameEntry  

wfAppnCosName 1.3.6.1.4.1.18.3.5.14.5.2.1.1
Administratively-assigned name for this class of service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnCosTransPriority 1.3.6.1.4.1.18.3.5.14.5.2.1.2
Transmission priority for this class of service. Values are: Low Medium High Network
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), network(4)  

wfAppnCosNodeRowTable 1.3.6.1.4.1.18.3.5.14.5.3
This table contains all node-row information for all class of service in this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnCosNodeRowEntry

wfAppnCosNodeRowEntry 1.3.6.1.4.1.18.3.5.14.5.3.1
The COS name is the first index and a integer is the second index to insure a unique index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnCosNodeRowEntry  

wfAppnCosNodeRowName 1.3.6.1.4.1.18.3.5.14.5.3.1.1
Administratively-assigned name for this class of service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnCosNodeRowIndex 1.3.6.1.4.1.18.3.5.14.5.3.1.2
Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosNodeRowWgt 1.3.6.1.4.1.18.3.5.14.5.3.1.3
Weight to be associated with the nodes that fit the criteria specified by this node row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosNodeRowResistMin 1.3.6.1.4.1.18.3.5.14.5.3.1.4
Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosNodeRowResistMax 1.3.6.1.4.1.18.3.5.14.5.3.1.5
Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosNodeRowMinCongestAllow 1.3.6.1.4.1.18.3.5.14.5.3.1.6
Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnCosNodeRowMaxCongestAllow 1.3.6.1.4.1.18.3.5.14.5.3.1.7
Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnCosTgRowTable 1.3.6.1.4.1.18.3.5.14.5.4
Table containing all the Tg-row information for all class of service defined in this node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnCosTgRowEntry

wfAppnCosTgRowEntry 1.3.6.1.4.1.18.3.5.14.5.4.1
The TgRowName and the TgRowIndex are the index for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnCosTgRowEntry  

wfAppnCosTgRowName 1.3.6.1.4.1.18.3.5.14.5.4.1.1
Administratively-assigned name for this class of service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnCosTgRowIndex 1.3.6.1.4.1.18.3.5.14.5.4.1.2
Index of COS name. This same value is used to access the node and TG COS tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowWgt 1.3.6.1.4.1.18.3.5.14.5.4.1.3
Weight to be associated with the nodes that fit the criteria specified by this tg-row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowEffCapMin 1.3.6.1.4.1.18.3.5.14.5.4.1.4
Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255 DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnCosTgRowEffCapMax 1.3.6.1.4.1.18.3.5.14.5.4.1.5
Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnCosTgRowConnCostMin 1.3.6.1.4.1.18.3.5.14.5.4.1.6
Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowConnCostMax 1.3.6.1.4.1.18.3.5.14.5.4.1.7
Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowByteCostMin 1.3.6.1.4.1.18.3.5.14.5.4.1.8
Minimum acceptable cost per byte for this Class of Service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowByteCostMax 1.3.6.1.4.1.18.3.5.14.5.4.1.9
Maximum acceptable cost per byte for this Class of Service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowSecurityMin 1.3.6.1.4.1.18.3.5.14.5.4.1.10
Minimum acceptable security for this Class of Service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnCosTgRowSecurityMax 1.3.6.1.4.1.18.3.5.14.5.4.1.11
Maximum acceptable security for this Class of Service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

wfAppnCosTgRowDelayMin 1.3.6.1.4.1.18.3.5.14.5.4.1.12
Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnCosTgRowDelayMax 1.3.6.1.4.1.18.3.5.14.5.4.1.13
Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. DEVIATION: 6611 MIB, uses units of microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negligible(1), terrestrial(2), packet(3), long(4), maximum(5)  

wfAppnCosTgRowUsr1Min 1.3.6.1.4.1.18.3.5.14.5.4.1.14
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowUsr1Max 1.3.6.1.4.1.18.3.5.14.5.4.1.15
Maximum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowUsr2Min 1.3.6.1.4.1.18.3.5.14.5.4.1.16
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowUsr2Max 1.3.6.1.4.1.18.3.5.14.5.4.1.17
Maximum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowUsr3Min 1.3.6.1.4.1.18.3.5.14.5.4.1.18
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnCosTgRowUsr3Max 1.3.6.1.4.1.18.3.5.14.5.4.1.19
Maximum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingTable 1.3.6.1.4.1.18.3.5.14.6.1
This table contains an entry for each instance of the APING application
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnTpPingEntry

wfAppnTpPingEntry 1.3.6.1.4.1.18.3.5.14.6.1.1
An entry in wfAppnTpPingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnTpPingEntry  

wfAppnTpPingDelete 1.3.6.1.4.1.18.3.5.14.6.1.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a APING instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnTpPingDisable 1.3.6.1.4.1.18.3.5.14.6.1.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this APING instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnTpPingIndex 1.3.6.1.4.1.18.3.5.14.6.1.1.3
This is the index of the Ping entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingFqPluName 1.3.6.1.4.1.18.3.5.14.6.1.1.4
This is the Fully-Qualified name of the Partner LU running the APINGD TP
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnTpPingDataLength 1.3.6.1.4.1.18.3.5.14.6.1.1.5
This is the length of the test data to be sent to the LU being PING-ed
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingConsecutiveSends 1.3.6.1.4.1.18.3.5.14.6.1.1.6
This specifies the number of consecutive sends that will be issued
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingEchoDisable 1.3.6.1.4.1.18.3.5.14.6.1.1.7
This specifies whether the Target of the PING will be requested to echo the data
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnTpPingIterations 1.3.6.1.4.1.18.3.5.14.6.1.1.8
This specifies the number of times the PING should be repeated
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingPartnerTpName 1.3.6.1.4.1.18.3.5.14.6.1.1.9
This specifies the partner TP name to ping. If no name is specified 'APINGD' will be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnTpPingMode 1.3.6.1.4.1.18.3.5.14.6.1.1.10
This specifies the mode to be used for this PING
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnTpPingState 1.3.6.1.4.1.18.3.5.14.6.1.1.11
This indicates the current state of the PING request
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), started(2), ok(3), failed(4)  

wfAppnTpPingAllocTime 1.3.6.1.4.1.18.3.5.14.6.1.1.12
This indicates the time (in milliseconds) it took to allocate the PING conversation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingMinTime 1.3.6.1.4.1.18.3.5.14.6.1.1.13
This indicates the minimum time (in milliseconds) it took to PING the partner
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingMaxTime 1.3.6.1.4.1.18.3.5.14.6.1.1.14
This indicates the maximum time (in milliseconds) it took to PING the partner
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingAvgTime 1.3.6.1.4.1.18.3.5.14.6.1.1.15
This indicates the average time (in milliseconds) it took to PING the partner
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnTpPingPartnerVersion 1.3.6.1.4.1.18.3.5.14.6.1.1.16
This is the version string returned by the partner
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnTpTunnelTable 1.3.6.1.4.1.18.3.5.14.6.3
This table contains entries for each APPN Tunnel
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnTpTunnelEntry

wfAppnTpTunnelEntry 1.3.6.1.4.1.18.3.5.14.6.3.1
An entry in wfAppnTpTunnelTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnTpTunnelEntry  

wfAppnTpTunnelDelete 1.3.6.1.4.1.18.3.5.14.6.3.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an APPN Tunnel instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnTpTunnelDisable 1.3.6.1.4.1.18.3.5.14.6.3.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this APPN Tunnel instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnTpTunnelState 1.3.6.1.4.1.18.3.5.14.6.3.1.3
The current state of the Tunnel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfAppnTpTunnelCct 1.3.6.1.4.1.18.3.5.14.6.3.1.4
This is the circuit number of the circuit running over this APPN Tunnel
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnTpTunnelFqPluName 1.3.6.1.4.1.18.3.5.14.6.3.1.5
This specifies the Partner LU for this APPN Tunnel
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnTpTunnelModeName 1.3.6.1.4.1.18.3.5.14.6.3.1.6
This specifies the Mode for this APPN Tunnel
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfAppnTpTunnelMedia 1.3.6.1.4.1.18.3.5.14.6.3.1.7
This specifies the media to be emulated by this tunnel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ring(5)  

wfAppnTpTunnelMacAddress 1.3.6.1.4.1.18.3.5.14.6.3.1.8
This specifies the local MAC address to be used by this tunnel
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfAppnTpTunnelTxFrames 1.3.6.1.4.1.18.3.5.14.6.3.1.9
This indicates the number of frames transmitted over this APPN Tunnel
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnTpTunnelRxFrames 1.3.6.1.4.1.18.3.5.14.6.3.1.10
This indicates the number of frames received over this APPN Tunnel
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnTpTunnelDropFrames 1.3.6.1.4.1.18.3.5.14.6.3.1.11
This indicates the number of frames dropped by this APPN Tunnel
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurLuTable 1.3.6.1.4.1.18.3.5.14.7.1
This table contains an entry for each LU currently being serviced by DLUR
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnDlurLuEntry

wfAppnDlurLuEntry 1.3.6.1.4.1.18.3.5.14.7.1.1
An entry in wfAppnDlurLuTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnDlurLuEntry  

wfAppnDlurLuName 1.3.6.1.4.1.18.3.5.14.7.1.1.1
This is the name of the LU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurLuPuName 1.3.6.1.4.1.18.3.5.14.7.1.1.2
This is the name of the PU associated with the LU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurLuDlusName 1.3.6.1.4.1.18.3.5.14.7.1.1.3
This is the name of the DLUS node supporting this LU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurLuNauAddress 1.3.6.1.4.1.18.3.5.14.7.1.1.4
This is the Network Addressable Unit address of this LU
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnDlurLuPluName 1.3.6.1.4.1.18.3.5.14.7.1.1.5
This is the name of the Partner LU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurLuRscv 1.3.6.1.4.1.18.3.5.14.7.1.1.6
This is the RSCV being used by this LU session
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnDlurLuRscvText 1.3.6.1.4.1.18.3.5.14.7.1.1.7
This is the RSCV (in a human-readable format) for this DLUR connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurPuTable 1.3.6.1.4.1.18.3.5.14.7.2
This table contains an entry for each PU currently being serviced by DLUR
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnDlurPuEntry

wfAppnDlurPuEntry 1.3.6.1.4.1.18.3.5.14.7.2.1
An entry in wfAppnDlurPuTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnDlurPuEntry  

wfAppnDlurPuName 1.3.6.1.4.1.18.3.5.14.7.2.1.1
This is the name of the PU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurPuId 1.3.6.1.4.1.18.3.5.14.7.2.1.2
ID of this PU
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnDlurPuDefinedDlusName 1.3.6.1.4.1.18.3.5.14.7.2.1.3
This is the name of the primary DLUS node defined this PU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurPuBackupDlusName 1.3.6.1.4.1.18.3.5.14.7.2.1.4
This is the name of the backup DLUS node defined this PU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurPuActiveDlusName 1.3.6.1.4.1.18.3.5.14.7.2.1.5
This is the name of the DLUS node currently supporting this PU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurPuPcid 1.3.6.1.4.1.18.3.5.14.7.2.1.6
This is the PCID of the DLUR 'pipe' session
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfAppnDlurPuFqCpName 1.3.6.1.4.1.18.3.5.14.7.2.1.7
This is the Fully-qualified CP name of the node assigning the PCID for the DLUR 'pipe' session
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurDlusTable 1.3.6.1.4.1.18.3.5.14.7.3
This table contains an entry for each DLUS known to this DLUR
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAppnDlurDlusEntry

wfAppnDlurDlusEntry 1.3.6.1.4.1.18.3.5.14.7.3.1
An entry in wfAppnDlurDlusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAppnDlurDlusEntry  

wfAppnDlurDlusName 1.3.6.1.4.1.18.3.5.14.7.3.1.1
This is the fully-qualified name of the DLUS node
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAppnDlurDlusIsDefault 1.3.6.1.4.1.18.3.5.14.7.3.1.2
This indicates if the DLUS is the default DLUS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnDlurDlusIsBackupDefault 1.3.6.1.4.1.18.3.5.14.7.3.1.3
This indicates if the DLUS is the default backup DLUS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wfAppnDlurDlusPipeState 1.3.6.1.4.1.18.3.5.14.7.3.1.4
This indicates the state of the DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), pendactive(2), active(3), pendinact(4)  

wfAppnDlurDlusActivePus 1.3.6.1.4.1.18.3.5.14.7.3.1.5
This indicates the number of PUs currently using this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAppnDlurDlusSentReqactpus 1.3.6.1.4.1.18.3.5.14.7.3.1.6
This indicates the number of REQACTPUs sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvReqactpuRsps 1.3.6.1.4.1.18.3.5.14.7.3.1.7
This indicates the number of REQACTPU responses received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvActpus 1.3.6.1.4.1.18.3.5.14.7.3.1.8
This indicates the number of ACTPUs received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusSentActpuRsps 1.3.6.1.4.1.18.3.5.14.7.3.1.9
This indicates the number of ACTPU responses sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusSentReqdactpus 1.3.6.1.4.1.18.3.5.14.7.3.1.10
This indicates the number of REQDACTPUs sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvReqdactpuRsps 1.3.6.1.4.1.18.3.5.14.7.3.1.11
This indicates the number of REQDACTPU responses received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvDactpus 1.3.6.1.4.1.18.3.5.14.7.3.1.12
This indicates the number of DACTPUs received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusSentDactpuRsps 1.3.6.1.4.1.18.3.5.14.7.3.1.13
This indicates the number of DACTPU responses sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvActlus 1.3.6.1.4.1.18.3.5.14.7.3.1.14
This indicates the number of ACTLUs received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusSentActluRsps 1.3.6.1.4.1.18.3.5.14.7.3.1.15
This indicates the number of ACTLU responses sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvDactlus 1.3.6.1.4.1.18.3.5.14.7.3.1.16
This indicates the number of DACTLUs received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusSentDactluRsps 1.3.6.1.4.1.18.3.5.14.7.3.1.17
This indicates the number of DACTLU responses sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvSscpPuMus 1.3.6.1.4.1.18.3.5.14.7.3.1.18
This indicates the number of SSCP-PU MUs received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusSentSscpPuMus 1.3.6.1.4.1.18.3.5.14.7.3.1.19
This indicates the number of SSCP-PU MUs sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusRcvSscpLuMus 1.3.6.1.4.1.18.3.5.14.7.3.1.20
This indicates the number of SSCP-LU MUs received over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnDlurDlusSentSscpLuMus 1.3.6.1.4.1.18.3.5.14.7.3.1.21
This indicates the number of SSCP-LU MUs sent over this DLUR-DLUS pipe
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAppnPathSwitch 1.3.6.1.4.1.18.3.5.14.8
OBJECT IDENTIFIER    

wfAppnPathSwitchDelete 1.3.6.1.4.1.18.3.5.14.8.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a path switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAppnPathSwitchDisable 1.3.6.1.4.1.18.3.5.14.8.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this path switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAppnPathSwitchRtpConnName 1.3.6.1.4.1.18.3.5.14.8.3
This is the name of the RTP connection to path switch
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor