WYSE-MIB

File: WYSE-MIB.mib (127920 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises DisplayString OBJECT-TYPE
TRAP-TYPE

Defined Types

Wbt3RamEntry  
SEQUENCE    
  wbt3RamIndex INTEGER
  wbt3RamType INTEGER
  wbt3RamSize INTEGER

Wbt3RomEntry  
SEQUENCE    
  wbt3RomIndex INTEGER
  wbt3RomType INTEGER
  wbt3RomSize INTEGER

Wbt3PCCardEntry  
SEQUENCE    
  wbt3PCCardIndex INTEGER
  wbt3PCCardType INTEGER
  wbt3PCCardVendor DisplayString

Wbt3DhcpInfoEntry  
SEQUENCE    
  wbt3DhcpInfoIndex INTEGER
  wbt3InterfaceNum INTEGER
  wbt3ServerIP DisplayString
  wbt3Username DisplayString
  wbt3Domain DisplayString
  wbt3Password INTEGER
  wbt3CommandLine DisplayString
  wbt3WorkingDir DisplayString
  wbt3FileServer DisplayString
  wbt3FileRootPath DisplayString
  wbt3TrapServerList DisplayString
  wbt3SetCommunity INTEGER

Wbt3CurInfoEntry  
SEQUENCE    
  wbt3CurInfoIndex INTEGER
  wbt3CurBuildNum DisplayString
  wbt3CurOEMBuildNum DisplayString
  wbt3CurModBuildDate DisplayString
  wbt3CurOEM DisplayString
  wbt3CurUser DisplayString
  wbt3CurHWPlatform DisplayString
  wbt3CurOS DisplayString

Wbt3DUpInfoEntry  
SEQUENCE    
  wbt3DUpInfoIndex INTEGER
  wbt3DUpBuildNum DisplayString
  wbt3DUpOEMBuildNum DisplayString
  wbt3DUpModBuildDate DisplayString

Wbt3UpDnLoadEntry  
SEQUENCE    
  wbt3UpDnLoadIndex INTEGER
  wbt3UpDnLoadId DisplayString
  wbt3UpDnLoadOp INTEGER
  wbt3UpDnLoadSrcFile DisplayString
  wbt3UpDnLoadDstFile DisplayString
  wbt3UpDnLoadFileType DisplayString
  wbt3UpDnLoadProtocol INTEGER
  wbt3UpDnLoadFServer DisplayString
  wbt3UpDnLoadTimeFlag INTEGER

Wbt3NetworkEntry  
SEQUENCE    
  wbt3NetworkIndex INTEGER
  wbt3DHCPEnable INTEGER
  wbt3NetworkAddress DisplayString
  wbt3SubnetMask DisplayString
  wbt3Gateway DisplayString
  wbt3dnsEnable INTEGER
  wbt3defaultDomain DisplayString
  wbt3primaryDNSserverIPaddress DisplayString
  wbt3secondaryDNSserverIPaddress DisplayString
  wbt3winsEnable INTEGER
  wbt3primaryWINSserverIPaddress DisplayString
  wbt3secondaryWINSserverIPaddress DisplayString
  wbt3NetworkSpeed INTEGER
  wbt3NetworkProtocol INTEGER

DefaultHotkeysEntry  
SEQUENCE    
  iCAStatusDialog INTEGER
  iCAStatusDialog2 INTEGER
  iCACloseRemoteApplication INTEGER
  iCACloseRemoteApplication2 INTEGER
  iCAtoggleTitleBar INTEGER
  iCAtoggleTitleBar2 INTEGER
  iCActrlAltDel INTEGER
  iCActrlAltDel2 INTEGER
  iCActrlEsc INTEGER
  iCActrlEsc2 INTEGER
  iCAaltEsc INTEGER
  iCAaltEsc2 INTEGER
  iCAaltTab INTEGER
  iCAaltTab2 INTEGER
  iCAaltBackTab INTEGER
  iCAaltBackTab2 INTEGER

Wbt3ConnectionEntry  
SEQUENCE    
  wbt3ConnectionName DisplayString
  wbt3ConnectionType INTEGER
  wbt3ConnectionEntryStatus INTEGER

Wbt3RDPConnEntry  
SEQUENCE    
  wbt3RDPConnName DisplayString
  wbt3RDPConnServer DisplayString
  wbt3RDPConnLowSpeed INTEGER
  wbt3RDPConnAutoLogon INTEGER
  wbt3RDPConnUsername DisplayString
  wbt3RDPConnDomain DisplayString
  wbt3RDPConnStartApplication INTEGER
  wbt3RDPConnFilename DisplayString
  wbt3RDPConnWorkingDir DisplayString
  wbt3RDPConnModifiable INTEGER

Wbt3ICAConnEntry  
SEQUENCE    
  wbt3ICAConnName DisplayString
  wbt3ICAConnCommType INTEGER
  wbt3ICAConnServer DisplayString
  wbt3ICAConnCommandLine DisplayString
  wbt3ICAConnWorkingDir DisplayString
  wbt3ICAConnUsername DisplayString
  wbt3ICAConnDomain DisplayString
  wbt3ICAConnColors INTEGER
  wbt3ICAConnDataCompress INTEGER
  wbt3ICAConnSoundQuality INTEGER
  wbt3ICAConnModifiable INTEGER

Wbt3TermConnEntry  
SEQUENCE    
  wbt3TermConnName DisplayString
  wbt3TermConnCommType INTEGER
  wbt3TermConnServer DisplayString
  wbt3TermConnEmuType INTEGER
  wbt3TermVTEmuModel INTEGER
  wbt3TermIBM3270EmuModel INTEGER
  wbt3TermIBM5250EmuModel INTEGER
  wbt3TermConnPortNumber DisplayString
  wbt3TermConnTelnetName DisplayString
  wbt3TermConnPrinterPort INTEGER
  wbt3TermConnFormFeed INTEGER
  wbt3TermConnAutoLineFeed INTEGER
  wbt3TermConnModifiable INTEGER

Wbt3UsersEntry  
SEQUENCE    
  wbt3UsersStatus INTEGER
  wbt3userName DisplayString
  wbt3privilege INTEGER
  wbt3password DisplayString
  wbt3Connection1 DisplayString
  wbt3Connection2 DisplayString
  wbt3Connection3 DisplayString
  wbt3Connection4 DisplayString
  wbt3Connection5 DisplayString
  wbt3Connection6 DisplayString
  wbt3Connection7 DisplayString
  wbt3Connection8 DisplayString
  wbt3UserPasswordChange INTEGER

Defined Values

wyse 1.3.6.1.4.1.714
OBJECT IDENTIFIER    

product 1.3.6.1.4.1.714.1
OBJECT IDENTIFIER    

old 1.3.6.1.4.1.714.1.1
OBJECT IDENTIFIER    

thinClient 1.3.6.1.4.1.714.1.2
OBJECT IDENTIFIER    

wysenet 1.3.6.1.4.1.714.1.1.1
OBJECT IDENTIFIER    

wbt3 1.3.6.1.4.1.714.1.2.3
OBJECT IDENTIFIER    

wbt3Memory 1.3.6.1.4.1.714.1.2.3.1
OBJECT IDENTIFIER    

wbt3PCCard 1.3.6.1.4.1.714.1.2.3.2
OBJECT IDENTIFIER    

wbt3IODevice 1.3.6.1.4.1.714.1.2.3.3
OBJECT IDENTIFIER    

wbt3Display 1.3.6.1.4.1.714.1.2.3.4
OBJECT IDENTIFIER    

wbt3DhcpInfo 1.3.6.1.4.1.714.1.2.3.5
OBJECT IDENTIFIER    

wbt3BuildInfo 1.3.6.1.4.1.714.1.2.3.6
OBJECT IDENTIFIER    

wbt3CustomFields 1.3.6.1.4.1.714.1.2.3.7
OBJECT IDENTIFIER    

wbt3Administration 1.3.6.1.4.1.714.1.2.3.8
OBJECT IDENTIFIER    

wbt3TrapsInfo 1.3.6.1.4.1.714.1.2.3.9
OBJECT IDENTIFIER    

wbt3MibRev 1.3.6.1.4.1.714.1.2.3.10
OBJECT IDENTIFIER    

wbt3Network 1.3.6.1.4.1.714.1.2.3.11
OBJECT IDENTIFIER    

wbt3Apps 1.3.6.1.4.1.714.1.2.3.12
OBJECT IDENTIFIER    

wbt3Connections 1.3.6.1.4.1.714.1.2.3.13
OBJECT IDENTIFIER    

wbt3Users 1.3.6.1.4.1.714.1.2.3.14
OBJECT IDENTIFIER    

wbt3Ram 1.3.6.1.4.1.714.1.2.3.1.1
OBJECT IDENTIFIER    

wbt3Rom 1.3.6.1.4.1.714.1.2.3.1.2
OBJECT IDENTIFIER    

wbt3RamNum 1.3.6.1.4.1.714.1.2.3.1.1.1
The number of Ram presents in this system
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3RamTable 1.3.6.1.4.1.714.1.2.3.1.1.2
A list of Ram entries, number of entries is given by the value of wbt3RamNum
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3RamEntry

wbt3RamEntry 1.3.6.1.4.1.714.1.2.3.1.1.2.1
A Ram entity present in this system
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3RamEntry  

wbt3RamIndex 1.3.6.1.4.1.714.1.2.3.1.1.2.1.1
A unique value for each Ram entity present in this system. Its value ranges between 1 and the value of wbt3RamNum
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3RamType 1.3.6.1.4.1.714.1.2.3.1.1.2.1.2
The type of Ram Currently defined numbers are: base(1) video(2) extend(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER base(1), video(2), extend(3)  

wbt3RamSize 1.3.6.1.4.1.714.1.2.3.1.1.2.1.3
Total size of this ram entity in bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3RomNum 1.3.6.1.4.1.714.1.2.3.1.2.1
The number of Rom entity presents in this system
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3RomTable 1.3.6.1.4.1.714.1.2.3.1.2.2
A list of Rom entries, number of entries is given by the value of wbt3RomNum
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3RomEntry

wbt3RomEntry 1.3.6.1.4.1.714.1.2.3.1.2.2.1
A Rom entity present in this system
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3RomEntry  

wbt3RomIndex 1.3.6.1.4.1.714.1.2.3.1.2.2.1.1
A unique value for each Rom entity present in this system. Its value ranges between 1 and the value of wbt3RomNum
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3RomType 1.3.6.1.4.1.714.1.2.3.1.2.2.1.2
The type of Rom Currently defined numbers are: boot(1) os(2) option(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER boot(1), os(2), option(3)  

wbt3RomSize 1.3.6.1.4.1.714.1.2.3.1.2.2.1.3
Total size of this Rom entity in bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3PCCardNum 1.3.6.1.4.1.714.1.2.3.2.1
The number of PCCard slots presents in this system
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3PCCardTable 1.3.6.1.4.1.714.1.2.3.2.2
A list of PCCard entries, number of entries is given by the value of wbt3PCCardNum
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3PCCardEntry

wbt3PCCardEntry 1.3.6.1.4.1.714.1.2.3.2.2.1
A PCCard slot present in this system
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3PCCardEntry  

wbt3PCCardIndex 1.3.6.1.4.1.714.1.2.3.2.2.1.1
A unique value for each PCCard slot present in this system. Its value ranges between 1 and the value of wbt3PCCardNum
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3PCCardType 1.3.6.1.4.1.714.1.2.3.2.2.1.2
The type of PCCard card currently plugged in this PCCard slot. Currently defined numbers are: empty(65535), -- the PCCard slot is empty multifunction(0), -- a multi function PCCard card is currently in the PCCard slot memory(1), modem(2), parallel-port(3), fixed-disk(4), video-adaptor(5), lan-adapter(6), AIMS(7)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(256), multifunction(0), memory(1), serial-port-modem(2), parallel-port(3), fixed-disk(4), video-adaptor(5), lan-adapter(6), aims(7)  

wbt3PCCardVendor 1.3.6.1.4.1.714.1.2.3.2.2.1.3
A textual description of the vendor of the PCCard card currently plugged in this slot. e.g. 'Eicon DIVA PC Card'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3IODevAttached 1.3.6.1.4.1.714.1.2.3.3.1
A 32bit value which indicates the input devices currently attached to the unit. bit 0 - set if keyboard attached bit 1 - set if mouse driver loaded bit 2 - set if micro touch screen attached bit 3 - set if elo touch screen attached bit 4 - set if lightpen attached bit 5 - set if floppy drive attached
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967295  

wbt3kbLanguage 1.3.6.1.4.1.714.1.2.3.3.2
The language setting for the keyboard attached to this terminal
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER english-us(0), english-uk(1), french(2), german(3), spanish(4), italian(5), swedish(6), danish(7), norwegian(8), dutch(9), belgian-french(10), finnish(11), swiss-french(12), swiss-german(13), japanese(14), canadian-french(15), belgian-dutch(16), portuguese(17), brazilian-abnt(18), italian-142(19), latin-american(20), us-international(21), canadian-fr-multi(22), canadian-eng-multi(23), spanish-variation(24)  

wbt3CharacterRepeatDelay 1.3.6.1.4.1.714.1.2.3.3.3
Indicates the delay time between each character.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delay-250(250), delay-500(500), delay-750(750), delay-1000(1000)  

wbt3CharacterRepeatRate 1.3.6.1.4.1.714.1.2.3.3.4
Indicates repeat rate between each character in the range of 0 to 31 at 1 interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

wbt3DispCharacteristic 1.3.6.1.4.1.714.1.2.3.4.1
OBJECT IDENTIFIER    

wbt3DispCapability 1.3.6.1.4.1.714.1.2.3.4.2
OBJECT IDENTIFIER    

wbt3EnergySaver 1.3.6.1.4.1.714.1.2.3.4.3
Indicates which energy saver is in use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), screensaver(1), monitoroff(2)  

wbt3ScreenTimeOut 1.3.6.1.4.1.714.1.2.3.4.4
Indicates the time (in minutes) of non-activity to trigger the screen saver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1440  

wbt3TouchScreen 1.3.6.1.4.1.714.1.2.3.4.5
If the terminal has a touch screen, indicates to which port it is attached
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), com1(1), com2(2)  

wbt3DispFreq 1.3.6.1.4.1.714.1.2.3.4.1.1
A 8bit value which indicates the current display frequency in Hz. Available display frequency values for Leo: 60/75/85 Hz, for Mars: 60/75 Hz. wbt3DispFreq can not be set if use DDC is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

wbt3DispHorizPix 1.3.6.1.4.1.714.1.2.3.4.1.2
A 16bit value which indicates the current number of horizontal pixels. Available display horizontal pixel values for Leo: 640/800/1024/1280 (1280 only with 60 Hz) pixels, for Mars: 640/800/1024. wbt3DispHorizPix can not be set if use DDC is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3DispVertPix 1.3.6.1.4.1.714.1.2.3.4.1.3
A 16bit value which indicates the current number of vertical pixels. Available display vertical pixel values for Leo: 480/600/768/1024 (1024 only with 60 Hz) pixels, for Mars: 480/600/768. wbt3DispVertPix can not be set if use DDC is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3DispColor 1.3.6.1.4.1.714.1.2.3.4.1.4
Current display color depth
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3DispUseDDC 1.3.6.1.4.1.714.1.2.3.4.1.5
Automatic select the best available resolution and refresh rate. If selected Yes, the wbt3DispHorizPix, wbt3VertPix and wbt3DispFreq options can not be set. Use DDC is not available for Mars platform.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3DispFreqMax 1.3.6.1.4.1.714.1.2.3.4.2.1
A 8bit value which indicates the display frequency in Hz for maximum resolution
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

wbt3DispHorizPixMax 1.3.6.1.4.1.714.1.2.3.4.2.2
A 16bit value which indicates the maximum number of horizontal pixels
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3DispVertPixMax 1.3.6.1.4.1.714.1.2.3.4.2.3
A 16bit value which indicates the maximum number of vertical pixels
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3DispColorMax 1.3.6.1.4.1.714.1.2.3.4.2.4
Maximum display color depth
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3DhcpInfoNum 1.3.6.1.4.1.714.1.2.3.5.1
The number of entries in DHCP information table, this number equals to the number of currently initialized network interfaces (exclude loopback) in the terminal
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3DhcpInfoTable 1.3.6.1.4.1.714.1.2.3.5.2
A list of DHCP information table entry, Each entry lists the information obtained from DHCP server through a specific network interface in the terminal. The number of entries is given by the value of wbt3DhcpInfoNum
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3DhcpInfoEntry

wbt3DHCPoptionIDs 1.3.6.1.4.1.714.1.2.3.5.3
OBJECT IDENTIFIER    

wbt3DhcpInfoEntry 1.3.6.1.4.1.714.1.2.3.5.2.1
An interface with a DHCP information table entry on this system
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3DhcpInfoEntry  

wbt3DhcpInfoIndex 1.3.6.1.4.1.714.1.2.3.5.2.1.1
A unique value for this DHCP information table, Its value ranges between 1 and the value of wbt3DhcpInfoNum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3InterfaceNum 1.3.6.1.4.1.714.1.2.3.5.2.1.2
The interface number through which the dhcp info is obtained
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3ServerIP 1.3.6.1.4.1.714.1.2.3.5.2.1.3
WinFrame/WTS Server IP address, (Option 155)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3Username 1.3.6.1.4.1.714.1.2.3.5.2.1.4
Account to logon to WinFrame/WTS Server, (Option 156)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3Domain 1.3.6.1.4.1.714.1.2.3.5.2.1.5
Domain to authenticate account defined by wbt3Username, (Option 157)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3Password 1.3.6.1.4.1.714.1.2.3.5.2.1.6
0=No Password;1=Has Password, (Option 158)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nopassword(0), password(1)  

wbt3CommandLine 1.3.6.1.4.1.714.1.2.3.5.2.1.7
Application to use when connecting to a WinFrame/WTS Server, (Option 159)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3WorkingDir 1.3.6.1.4.1.714.1.2.3.5.2.1.8
Working Directory for application defined by wbt3CommandLine, (Option 160)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3FileServer 1.3.6.1.4.1.714.1.2.3.5.2.1.9
File server where ROM images are located, (Option 161)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3FileRootPath 1.3.6.1.4.1.714.1.2.3.5.2.1.10
Absolute path name for ROM image parent directory, (Option 162)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3TrapServerList 1.3.6.1.4.1.714.1.2.3.5.2.1.11
A list of host IPs which should receive SNMP trap from the terminal (Option 163)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3SetCommunity 1.3.6.1.4.1.714.1.2.3.5.2.1.12
SNMP Set Community (Option 164): 0 - dhcp supplied set community is ignored, local configuration takes precedence; 1 - provided by DHCP server and being used; 2 - not provided by DHCP server, default set community is used
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ignored(0), provided(1), notprovided(2)  

wbt3RDPstartApp 1.3.6.1.4.1.714.1.2.3.5.2.1.13
RDP option: Startup Application (Default Option 165)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3EmulationMode 1.3.6.1.4.1.714.1.2.3.5.2.1.14
Terminal Emulation option: Emulation Mode (Default Option 166)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3TerminalID 1.3.6.1.4.1.714.1.2.3.5.2.1.15
Terminal Emulation option: Terminal ID (Default Option 167)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3VirtualPortServer 1.3.6.1.4.1.714.1.2.3.5.2.1.16
Virtual Port option: Virtual Port Server (Default Option 168)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

remoteServer 1.3.6.1.4.1.714.1.2.3.5.3.1
Common option: Remote Server (Default Option 155)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

logonUserName 1.3.6.1.4.1.714.1.2.3.5.3.2
Common option: Logon User Name (Default Option 156)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

domain 1.3.6.1.4.1.714.1.2.3.5.3.3
Common option: Domain (Default Option 157)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

password 1.3.6.1.4.1.714.1.2.3.5.3.4
Common option: Login Password (Default Option 158)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

commandLine 1.3.6.1.4.1.714.1.2.3.5.3.5
Common option: Command Line (Default Option 159)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

workingDirectory 1.3.6.1.4.1.714.1.2.3.5.3.6
Common option: Working Directory (Default Option 160)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

fTPFileServer 1.3.6.1.4.1.714.1.2.3.5.3.8
FTP option: File Server (Default Option 161)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

fTPRootPath 1.3.6.1.4.1.714.1.2.3.5.3.9
FTP option: File Root Path (Default Option 162)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

trapServerList 1.3.6.1.4.1.714.1.2.3.5.3.10
SNMP option: Trap Server IP List (Default Option 163)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

setCommunity 1.3.6.1.4.1.714.1.2.3.5.3.11
SNMP option: Set Community (Default Option 164)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

rDPStartupApp 1.3.6.1.4.1.714.1.2.3.5.3.7
RDP option: Startup Application (Default Option 165)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

emulationMode 1.3.6.1.4.1.714.1.2.3.5.3.12
Terminal Emulation option: Emulation Mode (Default Option 166)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

terminalID 1.3.6.1.4.1.714.1.2.3.5.3.13
Terminal Emulation option: Terminal ID (Default Option 167)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

virtualPortServer 1.3.6.1.4.1.714.1.2.3.5.3.14
Virtual Port option: Virtual Port Server (Default Option 168)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..254  

wbt3CurrentInfo 1.3.6.1.4.1.714.1.2.3.6.1
OBJECT IDENTIFIER    

wbt3DhcpUpdateInfo 1.3.6.1.4.1.714.1.2.3.6.2
OBJECT IDENTIFIER    

wbt3CurInfoNum 1.3.6.1.4.1.714.1.2.3.6.1.1
Number of rom images reside in the terminal currently, include main & application
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3CurInfoTable 1.3.6.1.4.1.714.1.2.3.6.1.2
A table of build info for each rom image, number of entries is given by the value of wbt3CurInfoNum
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3CurInfoEntry

wbt3CurInfoEntry 1.3.6.1.4.1.714.1.2.3.6.1.2.1
A rom image present in this terminal
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3CurInfoEntry  

wbt3CurInfoIndex 1.3.6.1.4.1.714.1.2.3.6.1.2.1.1
A unique value for this rom image. Its value ranges between 1 and the value of wbt3CurInfoNum..
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3CurBuildNum 1.3.6.1.4.1.714.1.2.3.6.1.2.1.2
Build number of a rom image currently on the terminal
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3CurOEMBuildNum 1.3.6.1.4.1.714.1.2.3.6.1.2.1.3
Build number of flash ROM image currently on the terminal for OEM
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3CurModBuildDate 1.3.6.1.4.1.714.1.2.3.6.1.2.1.4
Date that ROM image currently on the terminal was created
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3CurOEM 1.3.6.1.4.1.714.1.2.3.6.1.2.1.5
Name of OEM who's ROM image is defined by wbt3OEMBuildNum
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3CurHWPlatform 1.3.6.1.4.1.714.1.2.3.6.1.2.1.6
OS installed on the terminal
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3CurOS 1.3.6.1.4.1.714.1.2.3.6.1.2.1.7
OS installed on the terminal
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3DUpInfoNum 1.3.6.1.4.1.714.1.2.3.6.2.1
Number of rom images reside in the terminal currently, include main & application
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3DUpInfoTable 1.3.6.1.4.1.714.1.2.3.6.2.2
A table of build info for each rom image, number of entries is given by the value of wbt3DUpInfoNum
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3DUpInfoEntry

wbt3DUpInfoEntry 1.3.6.1.4.1.714.1.2.3.6.2.2.1
A rom image present in this terminal
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3DUpInfoEntry  

wbt3DUpInfoIndex 1.3.6.1.4.1.714.1.2.3.6.2.2.1.1
A unique value for this rom image. Its value ranges between 1 and the value of wbt3DUpInfoNum..
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3DUpBuildNum 1.3.6.1.4.1.714.1.2.3.6.2.2.1.2
Build number of the updated ROM image
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3DUpOEMBuildNum 1.3.6.1.4.1.714.1.2.3.6.2.2.1.3
Build number of the updated ROM image for OEM
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3DUpModBuildDate 1.3.6.1.4.1.714.1.2.3.6.2.2.1.4
Date that update image was last modified
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3DUpOEMBuildDate 1.3.6.1.4.1.714.1.2.3.6.2.2.1.5
Date that update image was last modified for OEM
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3CustomField1 1.3.6.1.4.1.714.1.2.3.7.1
First custom field
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3CustomField2 1.3.6.1.4.1.714.1.2.3.7.2
Second custom field
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3CustomField3 1.3.6.1.4.1.714.1.2.3.7.3
Third custom field
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3UpDnLoad 1.3.6.1.4.1.714.1.2.3.8.1
OBJECT IDENTIFIER    

wbt3Action 1.3.6.1.4.1.714.1.2.3.8.2
OBJECT IDENTIFIER    

wbt3FTPsetting 1.3.6.1.4.1.714.1.2.3.8.3
OBJECT IDENTIFIER    

wbt3SNMPupdate 1.3.6.1.4.1.714.1.2.3.8.4
Terminal firmware upgrade using SNMP. Yes = SNMP update enable, No = SNMP update disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3DHCPupdate 1.3.6.1.4.1.714.1.2.3.8.5
Terminal firmware upgrade using DHCP. Yes = DHCP automatic update enable, No = DHCP automatic update disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3UpDnLoadNum 1.3.6.1.4.1.714.1.2.3.8.1.1
The number of entries in the Up/Download table, Maximum value is 5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3UpDnLoadTable 1.3.6.1.4.1.714.1.2.3.8.1.2
A list of files to be upload or download
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3UpDnLoadEntry

wbt3AcceptReq 1.3.6.1.4.1.714.1.2.3.8.1.3
Indicate whether thinClient is ready to accept SNMP up/down load request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3SubmitLoadJob 1.3.6.1.4.1.714.1.2.3.8.1.4
Setting this object to Ready(1) will kick off the up/download process specified in wbt3UpDnLoadTable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notready(0), ready(1)  

wbt3UpDnLoadEntry 1.3.6.1.4.1.714.1.2.3.8.1.2.1
An upload or download request entry from server
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3UpDnLoadEntry  

wbt3UpDnLoadIndex 1.3.6.1.4.1.714.1.2.3.8.1.2.1.1
A unique value for the request entry. Its value ranges between 1 and the value of wbt3UpDnLoadNum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wbt3UpDnLoadId 1.3.6.1.4.1.714.1.2.3.8.1.2.1.2
An id number for this up/download request. This number is used to match with WBT private trap which will be sent to the server upon done with this up/download request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3UpDnLoadOp 1.3.6.1.4.1.714.1.2.3.8.1.2.1.3
0=an upload request;1=a download request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER upload(0), download(1)  

wbt3UpDnLoadSrcFile 1.3.6.1.4.1.714.1.2.3.8.1.2.1.4
The path and file name for source file to be up/downloaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3UpDnLoadDstFile 1.3.6.1.4.1.714.1.2.3.8.1.2.1.5
The path and file name where the up/downloaded file will be stored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3UpDnLoadFileType 1.3.6.1.4.1.714.1.2.3.8.1.2.1.6
0=binary;1=ascii
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER binary(0), ascii(1)  

wbt3UpDnLoadProtocol 1.3.6.1.4.1.714.1.2.3.8.1.2.1.7
0=ftp, 1=tftp
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ftp(0), tftp(1)  

wbt3UpDnLoadFServer 1.3.6.1.4.1.714.1.2.3.8.1.2.1.8
The file server IP address (or name) to/from which the file is up/downloaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3UpDnLoadTimeFlag 1.3.6.1.4.1.714.1.2.3.8.1.2.1.9
0=execute request immediately
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER immediate(0)  

wbt3RebootRequest 1.3.6.1.4.1.714.1.2.3.8.2.1
Set this object to RebootNow to kick off a reboot on the thinclient
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noreboot(0), rebootnow(1)  

wbt3ResetToFactoryDefault 1.3.6.1.4.1.714.1.2.3.8.2.2
Reset the terminal to factory-default settings. The terminal will be reboot after ResetNow is set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noreset(0), resetnow(1)  

wbt3ServerName 1.3.6.1.4.1.714.1.2.3.8.3.1
File server name or IP address where the ROM images are located.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Directory 1.3.6.1.4.1.714.1.2.3.8.3.2
Directory where the ROM images are located.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3UserID 1.3.6.1.4.1.714.1.2.3.8.3.3
User identification to login to the file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Password2 1.3.6.1.4.1.714.1.2.3.8.3.4
User password to login to the file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3SavePassword 1.3.6.1.4.1.714.1.2.3.8.3.5
Yes = to save the password permanently, No = do not save the password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3InfoLocation 1.3.6.1.4.1.714.1.2.3.8.3.6
UseDHCPinfo = ServerName and Directory will be provided by DHCP server, UseLocalinfo = ServerName and Directory will be provided using local settings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uselocalinfo(0), usedhcpinfo(1)  

wbt3Security 1.3.6.1.4.1.714.1.2.3.8.7
OBJECT IDENTIFIER    

wbt3SecurityEnable 1.3.6.1.4.1.714.1.2.3.8.7.1
This group box is used to enable terminal security and connection configuration access. selecting enable terminal security, and deactivate the Hide Configure Tab function. By default this function is disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3HideConfigTab 1.3.6.1.4.1.714.1.2.3.8.7.2
This function hides the Configure tab in the Winterm Connections Manager. By default this function is not activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3FailOverEnable 1.3.6.1.4.1.714.1.2.3.8.7.3
Failover is a connection feature that is enabled using the Security properties sheet. Disabling this function activates the PingBeforeConnect function. By default this function is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3MultipleConnect 1.3.6.1.4.1.714.1.2.3.8.7.4
Allow multiple connections. Select Yes to enable. By default this function is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3PingBeforeConnect 1.3.6.1.4.1.714.1.2.3.8.7.5
Select Yes to enable. By default this function is deactivated. When FailOver is checked, PingBeforeConnect is grayed out, since it is implied that Ping is always performed before a connection is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3Verbose 1.3.6.1.4.1.714.1.2.3.8.7.6
Select Yes to enable the Verbose connection function. By default the box is disabled. During the FailOver operation, user can see the status via a log window by checking the Verbose checkbox. The log window will show everything from first connection onward.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoLoginEnable 1.3.6.1.4.1.714.1.2.3.8.7.7
The AutoLogin function is an automatic login function that does not use a dialog box as a prompt to log you back into your terminal. Whether you restart or log off, the AutoLogin dialog box displays, counts five seconds, then returns you to the Winterm Connections Manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoLoginUserName 1.3.6.1.4.1.714.1.2.3.8.7.8
This field is activated by enabling AutoLogin Enable. By default the field is blank.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3SingleButtonConnect 1.3.6.1.4.1.714.1.2.3.8.7.9
Select Yes to enable the function. By default the function is not activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoFailRecovery 1.3.6.1.4.1.714.1.2.3.8.7.10
Select Yes to enable the function. By default the function is activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3TrapStatus 1.3.6.1.4.1.714.1.2.3.9.1
Current trap status information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ls-done(0), ls-done-sameversion(1), ls-notready(2), ls-fail-shutdown(3), ls-fail-noupd(4), ls-fail-dnld-blocked(5), ls-fail-filenotfound(6), ls-fail-dir(7), ls-fail-upld-blocked(8), ls-fail-noserv(9), ls-fail-prot(10), ls-fail-nomem(11), ls-fail-noresource(12), ls-fail-resolvename(13), ls-fail-notbundle(14), ls-fail-checksum(15), ls-fail-flasherror(16), ls-fail-dnld-flash(17), ls-fail-usercancel(18), ls-fail-norflash(19), ls-fail-protnsupport(20), ls-fail-parsereg(21), ls-fail-parsereg-verincomp(22), ls-fail-parsereg-platfincomp(23), ls-fail-parsereg-osincomp(24), ls-fail-reset-defaultfactory(25), ls-fail-paraminifilenotfound(26), ls-invalid-bootstrap(27), ls-fail-badkey(28)  

wbt3TrapReqId 1.3.6.1.4.1.714.1.2.3.9.2
The SNMP up/down load request Id associated with current trap
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3TrapServers 1.3.6.1.4.1.714.1.2.3.9.3
OBJECT IDENTIFIER    

wbt3TrapServer1 1.3.6.1.4.1.714.1.2.3.9.3.1
Server name or IP address where the trap messages will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3TrapServer2 1.3.6.1.4.1.714.1.2.3.9.3.2
Server name or IP address where the trap messages will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3TrapServer3 1.3.6.1.4.1.714.1.2.3.9.3.3
Server name or IP address where the trap messages will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3TrapServer4 1.3.6.1.4.1.714.1.2.3.9.3.4
Server name or IP address where the trap messages will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3MibRevMajor 1.3.6.1.4.1.714.1.2.3.10.1
The major revision level of the MIB The number for current version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3MibRevMinor 1.3.6.1.4.1.714.1.2.3.10.2
The minor revision level of the MIB The number for current version is 8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3NetworkNum 1.3.6.1.4.1.714.1.2.3.11.1
The number of entries in the Network table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3NetworkTable 1.3.6.1.4.1.714.1.2.3.11.2
A table of network configuration, number of entries is given by the value of wbt3NetworkNum.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3NetworkEntry

wbt3NetworkEntry 1.3.6.1.4.1.714.1.2.3.11.2.1
A Network configuration presents in this terminal.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3NetworkEntry  

wbt3NetworkIndex 1.3.6.1.4.1.714.1.2.3.11.2.1.1
A unique value for the request entry. Its value ranges between 1 and the value of wbt3NetworkIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wbt3dhcpEnable 1.3.6.1.4.1.714.1.2.3.11.2.1.2
Indicates whether the terminal acquires its network parameters through DHCP or uses the static parameters provided.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3NetworkAddress 1.3.6.1.4.1.714.1.2.3.11.2.1.3
IP address persents in this terminal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3SubnetMask 1.3.6.1.4.1.714.1.2.3.11.2.1.4
Subnet Mask presents in this terminal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Gateway 1.3.6.1.4.1.714.1.2.3.11.2.1.5
Default gateway IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3dnsEnable 1.3.6.1.4.1.714.1.2.3.11.2.1.6
Indicates whether the terminal uses DNS to translate names to IP addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3defaultDomain 1.3.6.1.4.1.714.1.2.3.11.2.1.7
Indicates the domain in which the terminal belongs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3primaryDNSserverIPaddress 1.3.6.1.4.1.714.1.2.3.11.2.1.8
The IP address of the primary name server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3secondaryDNSserverIPaddress 1.3.6.1.4.1.714.1.2.3.11.2.1.9
The IP address of the secondary name server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3winsEnable 1.3.6.1.4.1.714.1.2.3.11.2.1.10
Indicates whether the terminal uses WINS to resolve to IP addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3primaryWINSserverIPaddress 1.3.6.1.4.1.714.1.2.3.11.2.1.11
The IP address of the primary name server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3secondaryWINSserverIPaddress 1.3.6.1.4.1.714.1.2.3.11.2.1.12
The IP address of the secondary name server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3NetworkSpeed 1.3.6.1.4.1.714.1.2.3.11.2.1.17
Indicates the Network speed connection.(Not available for Mars)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto-detect(0), mbs-10halfduplex(9), mbs-10fullduplex(8), mbs-100halfduplex(7), mbs-100fullduplex(6)  

wbt3NetworkProtocol 1.3.6.1.4.1.714.1.2.3.11.2.1.20
Indicates network protocol used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcp-ip(0), unknown(256)  

wbt3RDPencryption 1.3.6.1.4.1.714.1.2.3.12.1
To enable/disable the RPD encryption.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

wbt3VirtualPortServerIPaddress 1.3.6.1.4.1.714.1.2.3.12.2
Specify the virtual port server address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3com1Share 1.3.6.1.4.1.714.1.2.3.12.3
To enable/disable COM1 share.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

wbt3com2Share 1.3.6.1.4.1.714.1.2.3.12.4
To enable/disable COM2 share.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

wbt3parallelShare 1.3.6.1.4.1.714.1.2.3.12.5
To enable/disable parallel share port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

iCADefaultHotkeys 1.3.6.1.4.1.714.1.2.3.12.6
ICA Client Default HotKeys settings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DefaultHotkeysEntry

defaultHotkeysEntry 1.3.6.1.4.1.714.1.2.3.12.6.1
Default HotKeys entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DefaultHotkeysEntry  

iCAStatusDialog 1.3.6.1.4.1.714.1.2.3.12.6.1.1
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0), shift(1)  

iCAStatusDialog2 1.3.6.1.4.1.714.1.2.3.12.6.1.2
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

iCACloseRemoteApplication 1.3.6.1.4.1.714.1.2.3.12.6.1.3
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0), shift(1)  

iCACloseRemoteApplication2 1.3.6.1.4.1.714.1.2.3.12.6.1.4
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

iCAtoggleTitleBar 1.3.6.1.4.1.714.1.2.3.12.6.1.5
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0), shift(1)  

iCAtoggleTitleBar2 1.3.6.1.4.1.714.1.2.3.12.6.1.6
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

iCActrlAltDel 1.3.6.1.4.1.714.1.2.3.12.6.1.7
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0)  

iCActrlAltDel2 1.3.6.1.4.1.714.1.2.3.12.6.1.8
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

iCActrlEsc 1.3.6.1.4.1.714.1.2.3.12.6.1.9
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0)  

iCActrlEsc2 1.3.6.1.4.1.714.1.2.3.12.6.1.10
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

iCAaltEsc 1.3.6.1.4.1.714.1.2.3.12.6.1.11
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0), shift(1)  

iCAaltEsc2 1.3.6.1.4.1.714.1.2.3.12.6.1.12
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

iCAaltTab 1.3.6.1.4.1.714.1.2.3.12.6.1.13
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0), shift(1)  

iCAaltTab2 1.3.6.1.4.1.714.1.2.3.12.6.1.14
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

iCAaltBackTab 1.3.6.1.4.1.714.1.2.3.12.6.1.15
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctrl(0), shift(1)  

iCAaltBackTab2 1.3.6.1.4.1.714.1.2.3.12.6.1.16
ICAStatusDialog
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-0(0), nb-1(1), nb-2(2), nb-3(3), nb-4(4), nb-5(5), nb-6(6), nb-7(7), nb-8(8), nb-9(9)  

wbt3ConnectionsTable 1.3.6.1.4.1.714.1.2.3.13.2
A list of connection entries. The number of entries is the number of existing connections plus one. The last entry is a dummy entry reserved for new connection creation. wbt3ConnectionName for this dummy entry is 'Not Defined'.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3ConnectionEntry

wbt3ConnectionEntry 1.3.6.1.4.1.714.1.2.3.13.2.1
A connection entry containing objects describing this connection. wbt3ConnectionName is the instance identifier for wbt3ConnectionEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3ConnectionEntry  

wbt3ConnectionName 1.3.6.1.4.1.714.1.2.3.13.2.1.2
Name of the connection. This object is served as instance identifier for the connection entry. Therefore value for this object must be unique among all entries. Maximum length depends on wbt3ConnectionType. (37 for RDP wbt3ConnectionType; 32 for ICA wbt3ConnectionType; 42 for TEC wbt3ConnectionType; 20 for DialUp wbt3ConnectionType)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3ConnectionType 1.3.6.1.4.1.714.1.2.3.13.2.1.3
Type of the connection. This object can be modified when the associated wbt3ConnectionEntryStatus is notInService.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rdp(0), ica(1), tec(2), dialup(3)  

wbt3ConnectionEntryStatus 1.3.6.1.4.1.714.1.2.3.13.2.1.10
Status of this connection entry. This object is used to manage the creation and deletion of the wbt3ConnectionEntry. State machine for this object is compliant to RFC1903, definition of textual conventions for RowStatus. This object may not be set to 'active' unless the wbt3ConnectionName is set. active - this is an existing connection saved in permanent storage. Values of fields within this table entry are not allowed to modified while it is active. To modify fields within this table entry, take the entry to 'notInService' state first. notInService - this is a connection entry exists in the thinclient's temporary memory, but is unavailable for use by the thinclient device. Entry must be put in this state before modification to other fields (except wbt3ConnectionName) can be made. Changes to wbt3ConnectionName is NOT allowed. To modify the name of an existing connection, delete the connection by setting wbt3ConnectionEntryStatus to 'destroy', then create a new connection with the new name by following the description for status 'notReady', 'createAndGo' or 'createAndWait' as specified below. A management device has to set the wbt3ConnectionEntryStatus to 'active' to activate the connection entry. Entries remaining in notInService state for an excessive period of time will be removed to free up resource in the thinclient device. Entries in this state will not be retained after reboot. notReady - this is a dummy connection defined to facilitate creation of new entry. An administrator can create a new connection by modifying wbt3ConnectionName of this entry to a name which does not currently exist in wbt3ConnectionsTable. This will put the entry in notInService state. An administrator can then put the connection in permanent storage by changing wbt3ConnectionEntryStatus to 'active'. Note that the assigned connection name CANNOT be an empty or 'Not Defined' string. createAndGo - This status is supplied by a management station wishing to create a new instance of a connection entry and to have its status automatically set to active, making it available for use by the thinclient device. wbt3ConnectionName MUST be supplied in the same PDU which set wbt3connectionEntryStatus to 'createAndGo'. createAndWait - This status is supplied by a management station wishing to create a new instance of a connection entry (but not make it immediately available for use by the thinclient device). destroy - an administrator can delete an existing connection by setting this object of target entry to 'destroy'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

wbt3RDPConnections 1.3.6.1.4.1.714.1.2.3.13.3
OBJECT IDENTIFIER    

wbt3RDPConnTable 1.3.6.1.4.1.714.1.2.3.13.3.1
A table of connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and wbt3ConnectionType=RDP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3RDPConnEntry

wbt3RDPConnEntry 1.3.6.1.4.1.714.1.2.3.13.3.1.1
A RDP connection entry containing objects describing this connection. wbt3RDPConnName is the instance identifier for wbt3RDPConnEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3RDPConnEntry  

wbt3RDPConnName 1.3.6.1.4.1.714.1.2.3.13.3.1.1.1
Name of the RDP connection. This object is served as instance identifier for the RDPConnEntry. Value for this object is unique among all entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3RDPConnServer 1.3.6.1.4.1.714.1.2.3.13.3.1.1.2
Host server name or IP address the RDP Client connects to. Maximum length is 32. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3RDPConnLowSpeed 1.3.6.1.4.1.714.1.2.3.13.3.1.1.3
Using low speed connection. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3RDPConnAutoLogon 1.3.6.1.4.1.714.1.2.3.13.3.1.1.4
Enable RDP automatic logon. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3RDPConnUsername 1.3.6.1.4.1.714.1.2.3.13.3.1.1.5
Specify the user name to atomatically logon to host. Maximum length is 32. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3RDPConnDomain 1.3.6.1.4.1.714.1.2.3.13.3.1.1.7
Domain name of host server. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3RDPConnStartApplication 1.3.6.1.4.1.714.1.2.3.13.3.1.1.8
Select application starts up at connection. 0 = Desktop, 2 = select File name radio button. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER desktop(0), filename(2)  

wbt3RDPConnFilename 1.3.6.1.4.1.714.1.2.3.13.3.1.1.9
Name of the application to start. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3RDPConnWorkingDir 1.3.6.1.4.1.714.1.2.3.13.3.1.1.10
Application working directory. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3RDPConnModifiable 1.3.6.1.4.1.714.1.2.3.13.3.1.1.30
Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3ConnectionsTable is in 'notInService'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3ICAConnections 1.3.6.1.4.1.714.1.2.3.13.4
OBJECT IDENTIFIER    

wbt3ICAConnTable 1.3.6.1.4.1.714.1.2.3.13.4.1
A table of ICA connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and wbt3ConnectionType=ICA.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3ICAConnEntry

wbt3ICAConnEntry 1.3.6.1.4.1.714.1.2.3.13.4.1.1
A ICA connection entry containing objects describing this connection. wbt3ICAConnName is the instance identifier for wbt3ICAConnEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3ICAConnEntry  

wbt3ICAConnName 1.3.6.1.4.1.714.1.2.3.13.4.1.1.1
Name of the ICA connection. This object is served as instance identifier for the ICAConnEntry. Value for this object is unique among all entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3ICAConnCommType 1.3.6.1.4.1.714.1.2.3.13.4.1.1.2
Communication media this connection uses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(0)  

wbt3ICAConnServer 1.3.6.1.4.1.714.1.2.3.13.4.1.1.3
IP address or name of ICA server connect to. Maximum length is 63. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3ICAConnCommandLine 1.3.6.1.4.1.714.1.2.3.13.4.1.1.4
Command line to be launched once this ICA connection is brought up. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3ICAConnWorkingDir 1.3.6.1.4.1.714.1.2.3.13.4.1.1.5
Working Directory to be used for this ICA. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3ICAConnUsername 1.3.6.1.4.1.714.1.2.3.13.4.1.1.6
User name to be used to log on to ICA server. Maximum length is 19. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3ICAConnDomain 1.3.6.1.4.1.714.1.2.3.13.4.1.1.8
Domain name to be used to log on to ICA server. Maximum length is 16. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3ICAConnColors 1.3.6.1.4.1.714.1.2.3.13.4.1.1.9
Specify 16/256 window colors. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nb-16(0), nb-256(1)  

wbt3ICAConnDataCompress 1.3.6.1.4.1.714.1.2.3.13.4.1.1.10
Enable/Disable Data compression for this ICA session. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3ICAConnSoundQuality 1.3.6.1.4.1.714.1.2.3.13.4.1.1.11
Set sound quality for this ICA session, None to disable sound. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), low(1), medium(2), high(3)  

wbt3ICAConnModifiable 1.3.6.1.4.1.714.1.2.3.13.4.1.1.30
Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3ConnectionsTable is in 'notInService'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3TermConnections 1.3.6.1.4.1.714.1.2.3.13.5
OBJECT IDENTIFIER    

wbt3TermConnTable 1.3.6.1.4.1.714.1.2.3.13.5.1
A table of Terminal Emulation connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and wbt3ConnectionType=TEC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3TermConnEntry

wbt3TermConnEntry 1.3.6.1.4.1.714.1.2.3.13.5.1.1
A terminal emulation connection entry containing objects describing this connection. wbt3TermConnName is the instance identifier for wbt3TermConnEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3TermConnEntry  

wbt3TermConnName 1.3.6.1.4.1.714.1.2.3.13.5.1.1.1
A unique name for the Terminal Emulation configuration entry. Maximum length is 42
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wbt3TermConnCommType 1.3.6.1.4.1.714.1.2.3.13.5.1.1.2
Communication media this connection uses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(0)  

wbt3TermConnServer 1.3.6.1.4.1.714.1.2.3.13.5.1.1.3
IP address or host name of terminal server connect to. Maximum length is 60. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3TermConnEmuType 1.3.6.1.4.1.714.1.2.3.13.5.1.1.4
Emulation mode for this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vt52(0), vt100(1), vt400-7-bit(3), vt400-8-bit(4), ansi-bbs(5), sco-console(6), ibm3270(7), ibm3151(8), ibm5250(9), wy50(10), wy50-plus(11), tvi910(12), tvi920(13), tvi925(14), adds-a2(15), hz1500(16), wy60(17)  

wbt3TermConnVTEmuModel 1.3.6.1.4.1.714.1.2.3.13.5.1.1.5
Terminal model uses for this connection. This field represents the VT Terminal ID. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vt100(0), vt101(1), vt102(2), vt125(3), vt220(4), vt240(5), vt320(6), vt340(7), vt420(8), vt131(9), vt132(10), not-applicable(256)  

wbt3TermConnIBM3270EmuModel 1.3.6.1.4.1.714.1.2.3.13.5.1.1.6
IBM 3270 terminal emulation models. This object is valid only when wbt3TermConnEmuType = IBM3270. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ibm3278-2(0), ibm3278-3(1), ibm3278-4(2), ibm3278-5(3), ibm3278-2-e(4), ibm3278-3-e(5), ibm3278-4-e(6), ibm3278-5-e(7), ibm3279-2(8), ibm3279-3(9), ibm3279-4(10), ibm3279-5(11), ibm3287-1(12), not-applicable(256)  

wbt3TermConnIBM5250EmuModel 1.3.6.1.4.1.714.1.2.3.13.5.1.1.7
IBM 5250 terminal emulation models. This object is valid only when wbt3TermConnEmuType = IBM5250. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ibm5291-1(0), ibm5292-2(1), ibm5251-11(2), ibm3179-2(3), ibm3196-a1(4), ibm3180-2(5), ibm3477-fc(6), ibm3477-fg(7), ibm3486-ba(8), ibm3487-ha(9), ibm3487-hc(10), not-applicable(256)  

wbt3TermConnPortNumber 1.3.6.1.4.1.714.1.2.3.13.5.1.1.10
Telnet port number used for this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wbt3TermConnTelnetName 1.3.6.1.4.1.714.1.2.3.13.5.1.1.11
Name of this telnet session. Maximum length is 39. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3TermConnPrinterPort 1.3.6.1.4.1.714.1.2.3.13.5.1.1.12
Printer port assigned to this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lpt1(0)  

wbt3TermConnFormFeed 1.3.6.1.4.1.714.1.2.3.13.5.1.1.13
Use Form Feed terminator for printing. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3TermConnAutoLineFeed 1.3.6.1.4.1.714.1.2.3.13.5.1.1.14
Use Auto line Feed for printing. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3TermConnScript 1.3.6.1.4.1.714.1.2.3.13.5.1.1.15
Script for this terminal emulation. Script syntax: Use back slash (\) to separate between 2 script commands, each script command has 2 entries (Act on and Send), Use semi column (;) to separate 2 entries. Samples: Login; or Login;\Username, Send entry syntax: C.return = Delay (2s) = Line Feed = Password = Pause (0.255) =

UserName = . Maximum length is 256. This object is modifiable only when wbt3TermConnModifiable is 'Yes'.

Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3TermConnModifiable 1.3.6.1.4.1.714.1.2.3.13.5.1.1.30
Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3ConnectionsTable is in 'notInService'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3UsersTable 1.3.6.1.4.1.714.1.2.3.14.2
A list of user accounts. The number of entries is the number of existing user accounts plus one. The last entry is a dummy entry reserved for new user account creation. wbt3userName for this dummy entry is 'Not Defined'.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wbt3UsersEntry

wbt3UsersEntry 1.3.6.1.4.1.714.1.2.3.14.2.1
A user account entry containing objects describing this user. wbt3userName is the instance identifier for wbt3UsersEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Wbt3UsersEntry  

wbt3UsersStatus 1.3.6.1.4.1.714.1.2.3.14.2.1.2
Status of this user account entry. This object is used to manage the creation and deletion of the wbt3UsersEntry. State machine for this object is compliant to RFC1903, definition of textual conventions for RowStatus. This object may not be set to 'active' unless the wbt3UserName is set. active - this is an existing user account saved in permanent storage. Values of fields within this table entry are not allowed to modified while it is active. To modify fields within this table entry, take the entry to 'notInService' state first. notInService - this is a user account entry exists in the thinclient's temporary memory, but is unavailable for use by the thinclient device. Entry must be put in this state before modification to other fields (except wbt3UserName) can be made. Changes to wbt3UserName is NOT allowed. To modify the name of an existing user account, delete the user account by setting wbt3UsersStatus to 'destroy', then create a new user account with the new name by following the description for status 'notReady', 'createAndGo' or 'createAndWait' as specified below. A management device has to set the wbt3UsersStatus to 'active' to activate the user account. Entries remaining in notInService state for an excessive period of time will be removed to free up resource in the thinclient device. Entries in this state will not be retained after reboot. notReady - this is a dummy user account defined to facilitate creation of new entry. An administrator can create a new user account by modifying wbt3UserName of this entry to a name which does not currently exist in wbt3UsersTable. This will put the entry in notInService state. An administrator can then put the user account in permanent storage by changing wbt3UsersStatus to 'active'. Note that the assigned user account name CANNOT be an empty or 'Not Defined' string. createAndGo - This status is supplied by a management station wishing to create a new instance of a user account and to have its status automatically set to active, making it available for use by the thinclient device. wbt3UserName MUST be supplied in the same PDU which set wbt3UsersStatus to 'createAndGo'. createAndWait - This status is supplied by a management station wishing to create a new instance of a user account. (but not make it immediately available for use by the thinclient device). destroy - an administrator can delete an existing user account by setting this object of target entry to 'destroy'. Note that the default administrator account with name 'Administrator' that is built in to the terminal cannot be deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

wbt3userName 1.3.6.1.4.1.714.1.2.3.14.2.1.3
Name of this user. This object is served as instance identifier for the user account entry. Therefore value for this object must be unique among all entries. Maximum length is 20.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3password 1.3.6.1.4.1.714.1.2.3.14.2.1.4
The password for this user account. Maximum length is 20. This object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3privilege 1.3.6.1.4.1.714.1.2.3.14.2.1.5
Indicates whether the user has extended, normal, or restricted rights on this terminal. Note that the privilege of the default administrator account (with name 'Administrator') cannot be modifed. For all other accounts, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER admin(0), user(1), guest(2)  

wbt3Connection1 1.3.6.1.4.1.714.1.2.3.14.2.1.7
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Connection2 1.3.6.1.4.1.714.1.2.3.14.2.1.8
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Connection3 1.3.6.1.4.1.714.1.2.3.14.2.1.9
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Connection4 1.3.6.1.4.1.714.1.2.3.14.2.1.10
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Connection5 1.3.6.1.4.1.714.1.2.3.14.2.1.11
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Connection6 1.3.6.1.4.1.714.1.2.3.14.2.1.12
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Connection7 1.3.6.1.4.1.714.1.2.3.14.2.1.13
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3Connection8 1.3.6.1.4.1.714.1.2.3.14.2.1.14
Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wbt3AutoStart1 1.3.6.1.4.1.714.1.2.3.14.2.1.15
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection1 object when the user logs on. This object cannot be modified if wbt3Connection1 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoStart2 1.3.6.1.4.1.714.1.2.3.14.2.1.16
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection2 object when the user logs on. This object cannot be modified if wbt3Connection2 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoStart3 1.3.6.1.4.1.714.1.2.3.14.2.1.17
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection3 object when the user logs on. This object cannot be modified if wbt3Connection3 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoStart4 1.3.6.1.4.1.714.1.2.3.14.2.1.18
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection4 object when the user logs on. This object cannot be modified if wbt3Connection4 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoStart5 1.3.6.1.4.1.714.1.2.3.14.2.1.19
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection5 object when the user logs on. This object cannot be modified if wbt3Connection5 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoStart6 1.3.6.1.4.1.714.1.2.3.14.2.1.20
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection6 object when the user logs on. This object cannot be modified if wbt3Connection6 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoStart7 1.3.6.1.4.1.714.1.2.3.14.2.1.21
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection7 object when the user logs on. This object cannot be modified if wbt3Connection7 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3AutoStart8 1.3.6.1.4.1.714.1.2.3.14.2.1.22
Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection8 object when the user logs on. This object cannot be modified if wbt3Connection8 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3UserPasswordChange 1.3.6.1.4.1.714.1.2.3.14.2.1.23
Indicates this user has privilege to change the password. For administrator, the password change is always on and cannot be set. For guest account, the password change is always off and cannot be set. For user account, the password change can be set on/off. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wbt3TrapDHCPBuildMismatch 1
Firmware build number mismatch according to information supplied by DHCP server.
TRAP-TYPE    

wbt3TrapDHCPUpdDone 2
Firmware upgrade initiated due to build number mismatch according to DHCP information is done.
TRAP-TYPE    

wbt3TrapDHCPUpdNotComplete 3
Firmware upgrade initiated due to build number mismatch according to DHCP information is not completed for some reason.
TRAP-TYPE    

wbt3TrapSNMPAccptLd 4
Ready to accept up/download request initiated by SNMP manager.
TRAP-TYPE    

wbt3TrapSNMPLdDone 5
SNMP initiated up/download request is done.
TRAP-TYPE    

wbt3TrapSNMPLdNotComplete 6
SNMP initiated up/download request is not completed for some reason.
TRAP-TYPE    

wbt3TrapRebootNotComplete 7
SNMP initiated reboot request is not completed for some reason.
TRAP-TYPE