WWP-LEOS-MSTP-MIB

File: WWP-LEOS-MSTP-MIB.mib (43049 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC WWP-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Integer32 TEXTUAL-CONVENTION
RowStatus DisplayString TruthValue
wwpModulesLeos

Defined Types

MstiInstanceIndex  
A unique value, greater than zero, for each Multiple Spanning Tree Instance (MSTI) in the managed Bridge. The value for each MstiInstanceIndex remains constant for the instance.
TEXTUAL-CONVENTION    
  Integer32 1..64  

MstiOrCistInstanceIndex  
This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).
TEXTUAL-CONVENTION    
  Integer32 0..64  

BpduCounter  
An optional counter of received or transmitted Bridge Protocol Data Units of different types to/from a Port. The agent may return the value 0 for any counter that is not supported.
TEXTUAL-CONVENTION    
  Counter32  

WwpLeosMstpPortCfgEntry  
SEQUENCE    
  wwpLeosMstpPortInfoIndex Integer32
  wwpLeosMstpPortEnable TruthValue
  wwpLeosMstpPortAdminExtPathCost Integer32
  wwpLeosMstpPortOperExtPathCost Integer32
  wwpLeosMstpPortDynamicExtPathCost TruthValue
  wwpLeosMstpPortAdminEdgePort TruthValue
  wwpLeosMstpPortOperEdgePort TruthValue
  wwpLeosMstpPortProtocolMigration TruthValue
  wwpLeosMstpPortAdminPointToPoint INTEGER
  wwpLeosMstpPortOperPointToPoint TruthValue
  wwpLeosMstpPortAutoEdge TruthValue
  wwpLeosMstpPortRestrictedRole TruthValue
  wwpLeosMstpPortRestrictedTcn TruthValue

WwpLeosMstpMstCfgVlanEntry  
SEQUENCE    
  wwpLeosMstpMstCfgVlanIndex Integer32
  wwpLeosMstpMstCfgMstiIndex MstiOrCistInstanceIndex

WwpLeosMstpMstCfgXstMappingEntry  
SEQUENCE    
  wwpLeosMstpMstCfgXstMappingIndex MstiOrCistInstanceIndex
  wwpLeosMstpMstCfgXstMapping1k OCTET STRING
  wwpLeosMstpMstCfgXstMapping2k OCTET STRING
  wwpLeosMstpMstCfgXstMapping3k OCTET STRING
  wwpLeosMstpMstCfgXstMapping4k OCTET STRING

WwpLeosMstpXstCfgEntry  
SEQUENCE    
  wwpLeosMstpXstCfgIndex MstiOrCistInstanceIndex
  wwpLeosMstpXstCfgBridgePriority Integer32
  wwpLeosMstpXstCfgStatus RowStatus

WwpLeosMstpXstPortCfgEntry  
SEQUENCE    
  wwpLeosMstpXstPortCfgPortIndex Integer32
  wwpLeosMstpXstPortCfgXstIndex MstiOrCistInstanceIndex
  wwpLeosMstpXstPortCfgPortPriority Integer32
  wwpLeosMstpXstPortCfgAdminIntPathCost Integer32
  wwpLeosMstpXstPortCfgOperIntPathCost Integer32
  wwpLeosMstpXstPortCfgDynamicIntPathCost TruthValue

WwpLeosMstpPortStatsEntry  
SEQUENCE    
  wwpLeosMstpPortStatsIndex Integer32
  wwpLeosMstpPortStatsClear TruthValue
  wwpLeosMstpPortStatsRxTcnBpdu BpduCounter
  wwpLeosMstpPortStatsRxCfgBpdu BpduCounter
  wwpLeosMstpPortStatsRxRstBpdu BpduCounter
  wwpLeosMstpPortStatsRxMstBpdu BpduCounter
  wwpLeosMstpPortStatsTxTcnBpdu BpduCounter
  wwpLeosMstpPortStatsTxCfgBpdu BpduCounter
  wwpLeosMstpPortStatsTxRstBpdu BpduCounter
  wwpLeosMstpPortStatsTxMstBpdu BpduCounter

Defined Values

wwpLeosMstp 1.3.6.1.4.1.6141.2.60.37
Deprecated the wwpLeosMstpPvstBpduReceivedNotification mib
MODULE-IDENTITY    

wwpLeosMstpNotifications 1.3.6.1.4.1.6141.2.60.37.0
OBJECT IDENTIFIER    

wwpLeosMstpObjects 1.3.6.1.4.1.6141.2.60.37.1
OBJECT IDENTIFIER    

wwpLeosMstpConformance 1.3.6.1.4.1.6141.2.60.37.2
OBJECT IDENTIFIER    

wwpLeosMstpCfg 1.3.6.1.4.1.6141.2.60.37.1.1
OBJECT IDENTIFIER    

wwpLeosMstpMstCfg 1.3.6.1.4.1.6141.2.60.37.1.2
OBJECT IDENTIFIER    

wwpLeosMstpXstCfg 1.3.6.1.4.1.6141.2.60.37.1.3
OBJECT IDENTIFIER    

wwpLeosMstpStats 1.3.6.1.4.1.6141.2.60.37.1.4
OBJECT IDENTIFIER    

wwpLeosMstpBridgeEnable 1.3.6.1.4.1.6141.2.60.37.1.1.1
When this object is set to true the MSTP operation for the bridge is enabled. Setting this object to false disables bridge MSTP operations.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpForceVersion 1.3.6.1.4.1.6141.2.60.37.1.1.2
This object contains the value of the ForceVersion MSTP State Machine Performance Parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stp(0), rstp(2), mstp(3)  

wwpLeosMstpForwardDelay 1.3.6.1.4.1.6141.2.60.37.1.1.3
This object represents the value of the FwdDelay MSTP State Machine Performance Parameter.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 4..30  

wwpLeosMstpTxHoldCount 1.3.6.1.4.1.6141.2.60.37.1.1.4
This object represents the value of the TxHoldCount MSTP State Machine Performance Parameter.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

wwpLeosMstpHelloTime 1.3.6.1.4.1.6141.2.60.37.1.1.5
This object represents the value of the HelloTime MSTP State Machine Performance Parameter.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

wwpLeosMstpMaxAge 1.3.6.1.4.1.6141.2.60.37.1.1.6
This object represents the value of the Max Age value used by the multiple spanning tree protocol.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 6..40  

wwpLeosMstpMaxHops 1.3.6.1.4.1.6141.2.60.37.1.1.7
This object represents the value of the MaxHops MSTP State Machine Performance Parameter.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 6..40  

wwpLeosMstpLoopbackBlock 1.3.6.1.4.1.6141.2.60.37.1.1.8
This object specifies if loopback port blocking feature is enabled/disabled for the multiple spanning tree protocol. Values of true or false will enable or disable this feature, respectively.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPathCostDefault 1.3.6.1.4.1.6141.2.60.37.1.1.9
The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER stp8021d1998(1), stp8021t2001(2)  

wwpLeosMstpGlobalStpMode 1.3.6.1.4.1.6141.2.60.37.1.1.10
For devices that contain multiple STP code-bases, this object allows the selection of the desired Spanning Tree Protocol code-base that is to be in effect. After a new value is selected a configuration save and device reboot must be performed for the new spanning tree code-base to take control over spanning tree operations within the device. The value of rstp(1) selects legacy RSTP code-base which is typically a highly optimized code-base intended for devices which are connected to other RSTP equipped devices. The value of mstp(2) selects the MSTP code-base which offers inherent backward compatibility for RSTP devices however this code-base is optimized for MSTP operations and may not be desirable when the device is operating in a network of only RSTP connected devices.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rstp(1), mstp(2)  

wwpLeosMstpPortCfgTable 1.3.6.1.4.1.6141.2.60.37.1.1.11
Table that contains configuration items for each port. This object has value similar to dot1dStpPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMstpPortCfgEntry

wwpLeosMstpPortCfgEntry 1.3.6.1.4.1.6141.2.60.37.1.1.11.1
MSTP port information entry containing configuration items specific to a particular port on the Bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMstpPortCfgEntry  

wwpLeosMstpPortInfoIndex 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.1
This is the port number used as index in the table. The value of this port id is similar to dot1dStpPort.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..65535  

wwpLeosMstpPortEnable 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.2
When this object is set to true the mstp operation for this port is enabled. Setting this object to false disables mstp operations on this port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortAdminExtPathCost 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.3
The administratively configurable external path cost. This object sets the ExternalPortPathCost MSTP State Machine Performance Parameter when configured to use manual port path cost values. This is used as the CIST External Path Cost field for this port in BPDUs and used in vector calculations for this port. The default value for this object is system dependent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..200000000  

wwpLeosMstpPortOperExtPathCost 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.4
The current operational external path cost for this port. Depending on the configuration, this may be the administratively configured external path cost or a value calculated by the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosMstpPortDynamicExtPathCost 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.5
This attribute enables or disables dynamic calculation of the external path cost for the given port. Values of true or false will enable or disable this feature, respectively.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortAdminEdgePort 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.6
The administrative value of the Edge Port parameter. A value of true indicates that this port should be assumed as an edge-port and a value of false indicates that this port should be assumed as a non-edge-port. The default value for this object is system dependent.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortOperEdgePort 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.7
The operational value of the Edge Port parameter. The object is initialized to the value of wwpLeosMstpPortAdminEdgePort and is set false on reception of a BPDU.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortProtocolMigration 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.8
When set to true, this object forces a spanning tree migration check to initiate within the definitions of the spanning tree state machines per IEEE. Any other operation on this object has no effect and it always returns false when read.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortAdminPointToPoint 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.9
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse indicates that this port should be treated as having a shared media connection. A value of auto indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceTrue(0), forceFalse(1), auto(2)  

wwpLeosMstpPortOperPointToPoint 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.10
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the wwpMtpPortAdminPointToPoint object.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortAutoEdge 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.11
The value of the autoEdge parameter used by MSTP to determine whether the value of wwpLeosMstpPortOperEdgePort should be set to the value of wwpLeosMstpPortAdminEdgePort or if it should be set according to the logic defined in the Bridge Detection state machine.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortRestrictedRole 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.12
The value of the restrictedRole parameter used by MSTP. When true, the port will not be selected as the root port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a port will be selected as an alternate port after the root port has been selected. When false, this port is allowed to be selected as the root port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortRestrictedTcn 1.3.6.1.4.1.6141.2.60.37.1.1.11.1.13
The value of the restrictedTcn parameter used by MSTP. When true, the port will not propagate received topology change notifications and topology changes to other ports. When false, normal topology change notification propagation will occur on the port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpMstCfgName 1.3.6.1.4.1.6141.2.60.37.1.2.1
The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. MSTP uses a fixed field of 32 characters when computing the MST Configuration Identifier and in MSTP BPDUs, when this object is set to a string of characters less than 32 in length, MST will fill in the remaining characters up to character number 32 with NULL octets (hex value 0x00). The default value for this object is the Bridge MAC address represented as an ASCII character string in canonical format, using upper-case hexadecimal letters and hyphens to represent the 48-bit Bridge MAC, with the remaining 15 characters containing the NULL octet (hex value 0x00).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wwpLeosMstpMstCfgRevLevel 1.3.6.1.4.1.6141.2.60.37.1.2.2
The value of this object is used by MSTP as the Revision Level field transmitted in MSTP BPDUs and in the calculation of the MST Configuration Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

wwpLeosMstpMstCfgVlanTable 1.3.6.1.4.1.6141.2.60.37.1.2.3
The MST Configuration Table used by MSTP to maintain the VLAN-to-MSTI mapping and for the calculation of the MST Configuration Digest. This table contains one entry for each VlanId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMstpMstCfgVlanEntry

wwpLeosMstpMstCfgVlanEntry 1.3.6.1.4.1.6141.2.60.37.1.2.3.1
Each MST Configuration Table entry contains the MSTI to which the VLAN is mapped. When the MSTI value is zero, the VLAN is mapped to the CIST.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMstpMstCfgVlanEntry  

wwpLeosMstpMstCfgVlanIndex 1.3.6.1.4.1.6141.2.60.37.1.2.3.1.1
The VlanId for which this entry contains the CIST or MSTI mapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4094  

wwpLeosMstpMstCfgMstiIndex 1.3.6.1.4.1.6141.2.60.37.1.2.3.1.2
An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped. The value of zero means this VLAN is mapped to the CIST, other values indicate an MSTI mapping for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

wwpLeosMstpMstCfgXstMappingTable 1.3.6.1.4.1.6141.2.60.37.1.2.4
Table containing the VLAN to XST mapping information from wwpLeosMstpMstCfgVlanTable in the format of VLAN- mappings per CIST/MSTI. A single table entry exists for the CIST and one entry for each MSTI. Each table entry contains VLAN mappings indicating the VLAN identifiers that are associated with the CIST or the particular MSTI. This table is read-only and is intended to provide management an efficient method of retrieving the VLAN/XST mapping information. To modify the information within this table, the wwpLeosMstpMstCfgVlanTable should be used.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMstpMstCfgXstMappingEntry

wwpLeosMstpMstCfgXstMappingEntry 1.3.6.1.4.1.6141.2.60.37.1.2.4.1
A conceptual row containing a bitmap of all VLAN identifiers that are mapped to the CIST or specified MSTI. The mapping of VLAN identifiers to CIST or MSTI is managed through the wwpLeosMstpMstCfgVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMstpMstCfgXstMappingEntry  

wwpLeosMstpMstCfgXstMappingIndex 1.3.6.1.4.1.6141.2.60.37.1.2.4.1.1
Uniquely identifies an instance. The entry of this table with index 0 represents the CIST. Non-zero index values represent a particular MSTI.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

wwpLeosMstpMstCfgXstMapping1k 1.3.6.1.4.1.6141.2.60.37.1.2.4.1.2
A string of octets containing one bit for each VLAN identifier. The first octet represents VLAN identifier values 0 through 7; the second octet represents VLAN identifier values 8 through 15, etc. The most significant bit of each octet corresponds to the lowest VLAN identifier value for that octet. This object represents VLAN identifier values 0 through 1023. Note, the bit representing VLAN identifier value 0 will always be clear (bit value 0).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

wwpLeosMstpMstCfgXstMapping2k 1.3.6.1.4.1.6141.2.60.37.1.2.4.1.3
A string of octets containing one bit for each VLAN identifier. The first octet represents VLAN identifier values 1024 through 1031; the second octet represents VLAN identifier values 1032 through 1039, etc. The most significant bit of each octet corresponds to the lowest VLAN identifier value for that octet. This entire object represents VLAN identifier values 1024 through 2047.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

wwpLeosMstpMstCfgXstMapping3k 1.3.6.1.4.1.6141.2.60.37.1.2.4.1.4
A string of octets containing one bit for each VLAN identifier. The first octet represents VLAN identifier values 2048 through 2055; the second octet represents VLAN identifier values 2056 through 2063, etc. The most significant bit of each octet corresponds to the lowest VLAN identifier value for that octet. This entire object represents VLAN identifier values 2048 through 3071.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

wwpLeosMstpMstCfgXstMapping4k 1.3.6.1.4.1.6141.2.60.37.1.2.4.1.5
A string of octets containing one bit for each VLAN identifier. The first octet represents VLAN identifier values 3072 through 3079; the second octet represents VLAN identifier values 3080 through 3087, etc. The most significant bit of each octet corresponds to the lowest VLAN identifier value for that octet. This entire object represents VLAN identifier values 3072 through 4095. Note, the bit representing VLAN identifier value 4095 will always be clear (bit value 0).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

wwpLeosMstpMstCfgIdDigest 1.3.6.1.4.1.6141.2.60.37.1.2.5
This object is the Configuration Digest calculated by MSTP and is used in MSTP BPDUs.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

wwpLeosMstpXstCfgTable 1.3.6.1.4.1.6141.2.60.37.1.3.1
Table contains CIST and MSTI configuration items for the bridge. The CIST is identified as index 0 and the MSTI entries use non-zero indices.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMstpXstCfgEntry

wwpLeosMstpXstCfgEntry 1.3.6.1.4.1.6141.2.60.37.1.3.1.1
CIST or MSTI entry containing configuration items for the CIST or the specified MSTI.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMstpXstCfgEntry  

wwpLeosMstpXstCfgIndex 1.3.6.1.4.1.6141.2.60.37.1.3.1.1.1
The index number for this entry. Zero refers to the CIST and non-zero values refer to MSTI entries for this Bridge.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

wwpLeosMstpXstCfgBridgePriority 1.3.6.1.4.1.6141.2.60.37.1.3.1.1.2
The Bridge Priority value used by the multiple spanning tree protocol in vector calculations and in BPDUs. For the CIST, this value is used in the CIST Bridge Identifier and for MSTIs this value is used in the MSTI Bridge Priority field of BPDUs.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..15  

wwpLeosMstpXstCfgStatus 1.3.6.1.4.1.6141.2.60.37.1.3.1.1.3
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to 'destroy'. Table rows representing MSTIs may be created or deleted using this object. The table row representing the CIST (Index 0) always exists, an attempt to delete this row will result in an SNMP error.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosMstpXstPortCfgTable 1.3.6.1.4.1.6141.2.60.37.1.3.2
Table of configuration items on a per-port per-CIST/MSTI basis. For each port, there is a single CIST (index 0) and multiple MSTIs (non-zero index values).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMstpXstPortCfgEntry

wwpLeosMstpXstPortCfgEntry 1.3.6.1.4.1.6141.2.60.37.1.3.2.1
Table entry containing configuration items specific to a particular port/CIST combination or port/MSTI combination. Each port on the bridge has a single CIST (index 0) and may have multiple MSTI configurations (non-zero indices).
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMstpXstPortCfgEntry  

wwpLeosMstpXstPortCfgPortIndex 1.3.6.1.4.1.6141.2.60.37.1.3.2.1.1
This is the port number used as index in the table. The value of this port id is similar to dot1dStpPort.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

wwpLeosMstpXstPortCfgXstIndex 1.3.6.1.4.1.6141.2.60.37.1.3.2.1.2
The CIST or MSTI index number for this port. Zero refers to the CIST and non-zero values refer to MSTI entries for this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

wwpLeosMstpXstPortCfgPortPriority 1.3.6.1.4.1.6141.2.60.37.1.3.2.1.3
The port priority for this port used in vector calculations and BPDUs. For the CIST for this port, this value is the priority component of the CIST Port Priority. For MSTI entries for this port, this value is the MSTI Port Priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..15  

wwpLeosMstpXstPortCfgAdminIntPathCost 1.3.6.1.4.1.6141.2.60.37.1.3.2.1.4
The administratively configurable internal path cost. For the CIST for this port, this value is the CIST Internal Root Path Cost. For MSTI entries for this port, this value is the MSTI Internal Root Path Cost. The default value for this object is system dependent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..200000000  

wwpLeosMstpXstPortCfgOperIntPathCost 1.3.6.1.4.1.6141.2.60.37.1.3.2.1.5
The current operational internal path cost for either the CIST or the specified MSTI. Depending on the configuration this value may be the administratively configured internal path cost or some other value determined by the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosMstpXstPortCfgDynamicIntPathCost 1.3.6.1.4.1.6141.2.60.37.1.3.2.1.6
This attribute enables or disables dynamic calculation of the internal path cost for the given port. When the XstIndex is zero, this applies to the CIST Internal Root Path Cost. When the XstIndex is non-zero, this applies to the specified MSTI Internal Root Path Cost. Values of true or false will enable or disable this feature, respectively.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpBridgeStatsClear 1.3.6.1.4.1.6141.2.60.37.1.4.1
This object allows all MSTP bridge statistics to be cleared. Setting this object to true will reset all statistics maintained under the wwpLeosMstpStats branch to a value of zero. Setting this object to false will have no effect. This object always returns a value of false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortStatsTable 1.3.6.1.4.1.6141.2.60.37.1.4.2
A table that contains MSTP statistical information about each port that is associated with this bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMstpPortStatsEntry

wwpLeosMstpPortStatsEntry 1.3.6.1.4.1.6141.2.60.37.1.4.2.1
A list of statistics for each port of the bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMstpPortStatsEntry  

wwpLeosMstpPortStatsIndex 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.1
This is the port number used as index in the table. The value of this port id is similar to dot1dStpPort.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

wwpLeosMstpPortStatsClear 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.2
This object allows the port statistics contained within this table entry to be cleared. Setting this object to true will reset all statistics for this port to a value of zero. Setting this object to false will have no effect. This object always returns a value of false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMstpPortStatsRxTcnBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.3
Received Topology Change Notification (TCN) messages for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpPortStatsRxCfgBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.4
Received Configuration BPDUs for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpPortStatsRxRstBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.5
Received RST BPDUs for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpPortStatsRxMstBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.6
Received MST BPDUs for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpPortStatsTxTcnBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.7
Transmitted Topology Change Notification (TCN) messages for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpPortStatsTxCfgBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.8
Transmitted Configuration BPDUs for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpPortStatsTxRstBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.9
Transmitted RST BPDUs for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpPortStatsTxMstBpdu 1.3.6.1.4.1.6141.2.60.37.1.4.2.1.10
Transmitted MST BPDUs for this port.
Status: current Access: read-only
OBJECT-TYPE    
  BpduCounter  

wwpLeosMstpNewRootNotification 1.3.6.1.4.1.6141.2.60.37.0.1
The wwpLeosMstpNewRootNotification indicates that the sending agent has become the new root of the Spanning Tree for the specified XST (CIST or MSTI). This notification is generated when the Port Role Selection state machine invokes the updtRolesTree procedure and this procedure operation results in a calculation of a Root Priority Vector for the XST which results in a value indicating that the bridge itself has become the root bridge for the XST.
Status: current Access: read-only
NOTIFICATION-TYPE    

wwpLeosMstpTopologyChangeNotification 1.3.6.1.4.1.6141.2.60.37.0.2
A wwpLeosMstpTopologyChangeNotification is sent by a bridge for the specified XST when the Topology Change state machine invokes the newTcWhile procedure which causes the tcWhile timer for the specified port and XST to change from a zero value to a non-zero value.
Status: current Access: read-only
NOTIFICATION-TYPE    

wwpLeosMstpPortBackupNotification 1.3.6.1.4.1.6141.2.60.37.0.3
A wwpLeosMstpPortBackupNotification is sent whenever the MSTP state machine logic determines that a loop has occurred and the received vector information represents another port on the same device. This notification is sent when the updtRolesTree procedure determines that the designated bridge and designated port components of the port priority vector reflect another port on this bridge which results in the selectedRole parameter for the CIST to transition to BackupPort.
Status: current Access: read-only
NOTIFICATION-TYPE    

wwpLeosMstpPvstBpduReceivedNotification 1.3.6.1.4.1.6141.2.60.37.0.4
A wwpLeosMstpPvstBpduReceivedNotification is sent to indicate that one or more PVST BPDUs have been received on the port in the past 60 seconds. Each minute, all ports are checked for reception of one or more PVST BPDUs and this notification is generated if any PVST BPDUs have been received.
Status: deprecated Access: read-only
NOTIFICATION-TYPE    

wwpLeosMstpSelfLoopNotification 1.3.6.1.4.1.6141.2.60.37.0.5
A wwpLeosMstpSelfLoopNotification is sent whenever device detects same cable connected to a port in a loop back. This determination is made by comparing the layer-2 address of the received frame with that of the bridge. This occurs before the frame data reaches the MSTP state machine logic. Also if loop-back blocking is enabled on the device then mstp will block this port (self disable).
Status: current Access: read-only
NOTIFICATION-TYPE    

wwpLeosMstpPortOperEdgeNotification 1.3.6.1.4.1.6141.2.60.37.0.6
A wwpLeosMstpPortOperEdgeNotification is sent whenever the MSTP state machine logic causes a change in the operEdge parameter associated with the specified port.
Status: current Access: read-only
NOTIFICATION-TYPE    

wwpLeosMstpPortFlapNotification 1.3.6.1.4.1.6141.2.60.37.0.7
A wwpLeosMstpPortFlapNotification is sent whenever device detects a port flapping. This notification is generated under following criteria. If device detects port flapped more than once within 1 minute timer period and it has not sent notification within last 5 minutes then it will generate this notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

wwpLeosMstpBridgeRootPortLostNotification 1.3.6.1.4.1.6141.2.60.37.0.8
A wwpLeosMstpBridgeRootPortLostNotification is sent whenever device detects that bridge root port is lost for a particular XST (CIST or MSTI). This notification is generated when a link has gone down and the role parameter for the CIST or any MSTI for that port is set to Root Port. This notification will indicate either the link failure or link partner MSTP disabled.
Status: current Access: read-only
NOTIFICATION-TYPE