WS-SW-ACL-MIB

File: WS-SW-ACL-MIB.mib (49827 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
WS-SW-SMI WS-TYPE-MIB

Imported symbols

OBJECT-GROUP IpAddress Integer32
Counter32 Counter64 OBJECT-TYPE
MODULE-IDENTITY DisplayString RowStatus
PhysAddress TruthValue wsSwAcl
AbbrevRowStatus DoActionNow

Defined Types

WsSwAclEntry  
SEQUENCE    
  wsSwAclId DisplayString
  wsSwAclType INTEGER
  wsSwAclRowStatus AbbrevRowStatus

WsSwAclStdIpAclEntry  
SEQUENCE    
  wsSwAclStdIpAclPrecedence INTEGER
  wsSwAclStdIpAclOpType INTEGER
  wsSwAclStdIpAclSrcIp IpAddress
  wsSwAclStdIpAclSrcIpMask INTEGER
  wsSwAclStdIpAclMark8021p INTEGER
  wsSwAclStdIpAclTos INTEGER
  wsSwAclStdIpAclWlanIndex INTEGER
  wsSwAclStdIpAclRowStatus AbbrevRowStatus
  wsSwAclStdIpAclLog TruthValue

WsSwAclExtIpAclEntry  
SEQUENCE    
  wsSwAclExtIpAclPrecedence INTEGER
  wsSwAclExtIpAclOpType INTEGER
  wsSwAclExtIpAclSrcIp IpAddress
  wsSwAclExtIpAclSrcIpMask INTEGER
  wsSwAclExtIpAclDestIp IpAddress
  wsSwAclExtIpAclDestIpMask INTEGER
  wsSwAclExtIpAclProtocolType INTEGER
  wsSwAclExtIpAclMark8021p INTEGER
  wsSwAclExtIpAclTos INTEGER
  wsSwAclExtIpAclWlanIndex INTEGER
  wsSwAclExtIpAclRowStatus AbbrevRowStatus
  wsSwAclExtIpAclLog TruthValue

WsSwAclExtIpAclIcmpEntry  
SEQUENCE    
  wsSwAclExtIpAclIcmpType INTEGER
  wsSwAclExtIpAclIcmpCode INTEGER
  wsSwAclExtIpAclIcmpRowStatus AbbrevRowStatus

WsSwAclExtIpAclTcpUdpEntry  
SEQUENCE    
  wsSwAclExtIpAclTcpUdpSrcPortLow INTEGER
  wsSwAclExtIpAclTcpUdpSrcPortHigh INTEGER
  wsSwAclExtIpAclTcpUdpDestPortLow INTEGER
  wsSwAclExtIpAclTcpUdpDestPortHigh INTEGER
  wsSwAclExtIpAclTcpUdpRowStatus AbbrevRowStatus

WsSwAclExtMacAclEntry  
SEQUENCE    
  wsSwAclExtMacAclPrecedence INTEGER
  wsSwAclExtMacAclOpType INTEGER
  wsSwAclExtMacAclSrcMac PhysAddress
  wsSwAclExtMacAclSrcMacMask PhysAddress
  wsSwAclExtMacAclDestMac PhysAddress
  wsSwAclExtMacAclDestMacMask PhysAddress
  wsSwAclExtMacAclVlanId INTEGER
  wsSwAclExtMacAclVlanUserPriority INTEGER
  wsSwAclExtMacAclEtherType INTEGER
  wsSwAclExtMacAclMark8021p INTEGER
  wsSwAclExtMacAclTos INTEGER
  wsSwAclExtMacAclWlanIndex INTEGER
  wsSwAclExtMacAclRowStatus AbbrevRowStatus

WsSwAclInterfaceAclEntry  
SEQUENCE    
  wsSwAclInterfaceAclIfName DisplayString
  wsSwAclInterfaceAclInboundIpAclId DisplayString
  wsSwAclInterfaceAclInboundMacAclId DisplayString
  wsSwAclInterfaceAclRowStatus AbbrevRowStatus

WsSwAclNatIfEntry  
SEQUENCE    
  wsSwAclNatIfName DisplayString
  wsSwAclNatIfType INTEGER
  wsSwAclNatIfRowStatus AbbrevRowStatus

WsSwAclStaticNatEntry  
SEQUENCE    
  wsSwAclStaticNatIndex Integer32
  wsSwAclStaticNatLocalAddr IpAddress
  wsSwAclStaticNatGlobalAddr IpAddress
  wsSwAclStaticNatIfType INTEGER
  wsSwAclStaticNatDirection INTEGER
  wsSwAclStaticNatLocalPort Integer32
  wsSwAclStaticNatGlobalPort Integer32
  wsSwAclStaticNatLocalProtocol INTEGER
  wsSwAclStaticNatRowStatus AbbrevRowStatus

WsSwAclDynamicNatEntry  
SEQUENCE    
  wsSwAclDynamicNatIndex INTEGER
  wsSwAclDynamicNatIfType INTEGER
  wsSwAclDynamicNatDirection INTEGER
  wsSwAclDynamicNatAclId DisplayString
  wsSwAclDynamicNatIfName DisplayString
  wsSwAclDynamicNatRowStatus AbbrevRowStatus

WsSwAclNatEntry  
SEQUENCE    
  wsSwAclNatIndex Integer32
  wsSwAclNatInsideLocalAddress IpAddress
  wsSwAclNatInsideLocalPort INTEGER
  wsSwAclNatInsideGlobalAddress IpAddress
  wsSwAclNatInsideGlobalPort INTEGER
  wsSwAclNatOutsideLocalAddress IpAddress
  wsSwAclNatOutsideLocalPort INTEGER
  wsSwAclNatOutsideGlobalAddress DisplayString
  wsSwAclNatOutsideGlobalPort INTEGER

WsSwAclStatsEntry  
SEQUENCE    
  wsSwAclStatsRuleId Integer32
  wsSwAclStatsAction INTEGER
  wsSwAclStatsIfName DisplayString
  wsSwAclStatsPrecedence INTEGER
  wsSwAclStatsProtocol INTEGER
  wsSwAclStatsSrcIpLow IpAddress
  wsSwAclStatsSrcIpHigh IpAddress
  wsSwAclStatsSrcPortLow INTEGER
  wsSwAclStatsSrcPortHigh INTEGER
  wsSwAclStatsDestIpLow IpAddress
  wsSwAclStatsDestIpHigh IpAddress
  wsSwAclStatsDestPortLow INTEGER
  wsSwAclStatsDestPortHigh INTEGER
  wsSwAclStatsTimesUsed Counter32
  wsSwAclStatsNumFlowsActive Counter32
  wsSwAclStatsNumFlowsTotal Counter32
  wsSwAclStatsTotalInPkts Counter64
  wsSwAclStatsTotalOutPkts Counter64

WsSwAclWlanAclEntry  
SEQUENCE    
  wsSwAclWlanIndex INTEGER
  wsSwAclWlanAclDirection INTEGER
  wsSwAclWlanMacAclId DisplayString
  wsSwAclWlanIpAclId DisplayString
  wsSwAclWlanAclRowStatus AbbrevRowStatus

Defined Values

wsSwAclMibModule 1.3.6.1.4.1.388.14.2.11.1
MIB for Access-Control List (ACL) and NAT configuration.
MODULE-IDENTITY    

wsSwAclMIB 1.3.6.1.4.1.388.14.2.11.1.2
OBJECT IDENTIFIER    

wsSwAclTable 1.3.6.1.4.1.388.14.2.11.1.2.1
Table for listing the ACLs configured on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclEntry

wsSwAclEntry 1.3.6.1.4.1.388.14.2.11.1.2.1.1
An entry in the ACL Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclEntry  

wsSwAclId 1.3.6.1.4.1.388.14.2.11.1.2.1.1.1
The identifier string for the ACL, usually a number.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wsSwAclType 1.3.6.1.4.1.388.14.2.11.1.2.1.1.2
The ACL type, whether standard IP or extended IP or extended MAC.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER standardIp(1), extendedIp(2), extendedMac(3)  

wsSwAclRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.1.1.3
Row status for the ACL entry.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclClearAllAcls 1.3.6.1.4.1.388.14.2.11.1.2.2
A scalar used to clear all the ACLs in the ACL table.
Status: current Access: read-write
OBJECT-TYPE    
  DoActionNow  

wsSwAclStdIpAclTable 1.3.6.1.4.1.388.14.2.11.1.2.3
Table for standard IP ACLs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclStdIpAclEntry

wsSwAclStdIpAclEntry 1.3.6.1.4.1.388.14.2.11.1.2.3.1
An entry in the standard IP ACL Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclStdIpAclEntry  

wsSwAclStdIpAclPrecedence 1.3.6.1.4.1.388.14.2.11.1.2.3.1.1
The precedence number for the Access Control Entry (ACE). 1 is the highest precedence rule and 5000 is the lowest precedence rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..5000  

wsSwAclStdIpAclOpType 1.3.6.1.4.1.388.14.2.11.1.2.3.1.2
The operation type (permit or deny) for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER deny(1), permit(2), mark(3)  

wsSwAclStdIpAclSrcIp 1.3.6.1.4.1.388.14.2.11.1.2.3.1.3
The source IP address for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

wsSwAclStdIpAclSrcIpMask 1.3.6.1.4.1.388.14.2.11.1.2.3.1.4
The source IP address mask for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..32  

wsSwAclStdIpAclMark8021p 1.3.6.1.4.1.388.14.2.11.1.2.3.1.5
The 802.1p VLAN user priority (to be used with -mark- action)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wsSwAclStdIpAclTos 1.3.6.1.4.1.388.14.2.11.1.2.3.1.6
The TOS bits in the IP header (to be used with -mark- action)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

wsSwAclStdIpAclWlanIndex 1.3.6.1.4.1.388.14.2.11.1.2.3.1.7
The WLAN index to be used with this standard IP ACL. Note: Use the wsSwAclWlanAclTable to set ACLs on WLANs.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER 1..32  

wsSwAclStdIpAclRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.3.1.8
The row status for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclStdIpAclLog 1.3.6.1.4.1.388.14.2.11.1.2.3.1.9
Log a match to this entry.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

wsSwAclExtIpAclTable 1.3.6.1.4.1.388.14.2.11.1.2.4
Table for extended IP ACLs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclExtIpAclEntry

wsSwAclExtIpAclEntry 1.3.6.1.4.1.388.14.2.11.1.2.4.1
An entry in the extended IP ACL Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclExtIpAclEntry  

wsSwAclExtIpAclPrecedence 1.3.6.1.4.1.388.14.2.11.1.2.4.1.1
The precedence number for the Access Control Entry (ACE). 1 is the highest precedence rule and 5000 is the lowest precedence rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..5000  

wsSwAclExtIpAclOpType 1.3.6.1.4.1.388.14.2.11.1.2.4.1.2
The operation type (permit or deny) for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER deny(1), permit(2), mark(3)  

wsSwAclExtIpAclSrcIp 1.3.6.1.4.1.388.14.2.11.1.2.4.1.3
The source IP address for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

wsSwAclExtIpAclSrcIpMask 1.3.6.1.4.1.388.14.2.11.1.2.4.1.4
The source IP address mask for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..32  

wsSwAclExtIpAclDestIp 1.3.6.1.4.1.388.14.2.11.1.2.4.1.5
The destination IP address for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

wsSwAclExtIpAclDestIpMask 1.3.6.1.4.1.388.14.2.11.1.2.4.1.6
The destination IP address mask for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..32  

wsSwAclExtIpAclProtocolType 1.3.6.1.4.1.388.14.2.11.1.2.4.1.7
The protocol type (ICMP/IP/TCP/UDP) for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER icmp(1), ip(2), tcp(3), udp(4)  

wsSwAclExtIpAclMark8021p 1.3.6.1.4.1.388.14.2.11.1.2.4.1.8
The 802.1p VLAN user priority (to be used with -mark- action)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wsSwAclExtIpAclTos 1.3.6.1.4.1.388.14.2.11.1.2.4.1.9
The TOS bits in the IP header (to be used with -mark- action)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

wsSwAclExtIpAclWlanIndex 1.3.6.1.4.1.388.14.2.11.1.2.4.1.10
The WLAN index to be used with this extended IP ACL. Note: Use the wsSwAclWlanAclTable to set ACLs on WLANs.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER 1..32  

wsSwAclExtIpAclRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.4.1.11
The row status for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclExtIpAclLog 1.3.6.1.4.1.388.14.2.11.1.2.4.1.12
Log a match to this entry.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

wsSwAclExtIpAclIcmpTable 1.3.6.1.4.1.388.14.2.11.1.2.5
A table for Extended IP Acls ICMP Protocol Parameters configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclExtIpAclIcmpEntry

wsSwAclExtIpAclIcmpEntry 1.3.6.1.4.1.388.14.2.11.1.2.5.1
An entry in the table for Extended IP Acls ICMP Protocol Parameters configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclExtIpAclIcmpEntry  

wsSwAclExtIpAclIcmpType 1.3.6.1.4.1.388.14.2.11.1.2.5.1.1
The type of the ICMP message.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

wsSwAclExtIpAclIcmpCode 1.3.6.1.4.1.388.14.2.11.1.2.5.1.2
The code within the ICMP message.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

wsSwAclExtIpAclIcmpRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.5.1.3
The row status for this entry in the wsSwAclExtIpAclIcmpTable.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclExtIpAclTcpUdpTable 1.3.6.1.4.1.388.14.2.11.1.2.6
A table for Extended IP Acls TCP/UDP Protocol Parameters configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclExtIpAclTcpUdpEntry

wsSwAclExtIpAclTcpUdpEntry 1.3.6.1.4.1.388.14.2.11.1.2.6.1
An entry in the table for Extended IP Acls TCP/UDP Protocol Parameters configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclExtIpAclTcpUdpEntry  

wsSwAclExtIpAclTcpUdpSrcPortLow 1.3.6.1.4.1.388.14.2.11.1.2.6.1.1
The low value in the range of TCP/UDP source port numbers permitted or denied for an ACE rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclExtIpAclTcpUdpSrcPortHigh 1.3.6.1.4.1.388.14.2.11.1.2.6.1.2
The high value in the range of TCP/UDP source port numbers permitted or denied for an ACE rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclExtIpAclTcpUdpDestPortLow 1.3.6.1.4.1.388.14.2.11.1.2.6.1.3
The low value in the range of TCP/UDP destination port numbers permitted or denied for an ACE rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclExtIpAclTcpUdpDestPortHigh 1.3.6.1.4.1.388.14.2.11.1.2.6.1.4
The high value in the range of TCP/UDP destination port numbers permitted or denied for an ACE rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclExtIpAclTcpUdpRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.6.1.5
The row status for this entry in the wsSwAclExtIpAclTcpUdpTable.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclExtMacAclTable 1.3.6.1.4.1.388.14.2.11.1.2.7
A table for Extended MAC ACLs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclExtMacAclEntry

wsSwAclExtMacAclEntry 1.3.6.1.4.1.388.14.2.11.1.2.7.1
A entry in the Extended MAC ACLs table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclExtMacAclEntry  

wsSwAclExtMacAclPrecedence 1.3.6.1.4.1.388.14.2.11.1.2.7.1.1
The precedence number for the Access Control Entry (ACE). 1 is the highest precedence rule and 5000 is the lowest precedence rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..5000  

wsSwAclExtMacAclOpType 1.3.6.1.4.1.388.14.2.11.1.2.7.1.2
The operation type (permit or deny) for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER deny(1), permit(2), mark(3)  

wsSwAclExtMacAclSrcMac 1.3.6.1.4.1.388.14.2.11.1.2.7.1.3
The source MAC address for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  PhysAddress  

wsSwAclExtMacAclSrcMacMask 1.3.6.1.4.1.388.14.2.11.1.2.7.1.4
The source MAC address mask for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  PhysAddress  

wsSwAclExtMacAclDestMac 1.3.6.1.4.1.388.14.2.11.1.2.7.1.5
The destination MAC address for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  PhysAddress  

wsSwAclExtMacAclDestMacMask 1.3.6.1.4.1.388.14.2.11.1.2.7.1.6
The destination MAC address mask for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  PhysAddress  

wsSwAclExtMacAclVlanId 1.3.6.1.4.1.388.14.2.11.1.2.7.1.7
The VLAN identifier for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4096  

wsSwAclExtMacAclVlanUserPriority 1.3.6.1.4.1.388.14.2.11.1.2.7.1.8
The VLAN user priority for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wsSwAclExtMacAclEtherType 1.3.6.1.4.1.388.14.2.11.1.2.7.1.9
The ether type for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclExtMacAclMark8021p 1.3.6.1.4.1.388.14.2.11.1.2.7.1.10
The 802.1p VLAN user priority (to be used with -mark- action)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wsSwAclExtMacAclTos 1.3.6.1.4.1.388.14.2.11.1.2.7.1.11
The TOS bits in the IP header (to be used with -mark- action)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

wsSwAclExtMacAclWlanIndex 1.3.6.1.4.1.388.14.2.11.1.2.7.1.12
The WLAN index to be used with this extended MAC ACL. Note: Use the wsSwAclWlanAclTable to set ACLs on WLANs in dataplane platforms.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER 1..32  

wsSwAclExtMacAclRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.7.1.13
The row status for this ACE.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclInterfaceAclTable 1.3.6.1.4.1.388.14.2.11.1.2.8
A table for applying ACLs to an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclInterfaceAclEntry

wsSwAclInterfaceAclEntry 1.3.6.1.4.1.388.14.2.11.1.2.8.1
An entry in the wsSwAclInterfaceAclTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclInterfaceAclEntry  

wsSwAclInterfaceAclIfName 1.3.6.1.4.1.388.14.2.11.1.2.8.1.1
The name of the interface to which ACL is applied.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclInterfaceAclInboundIpAclId 1.3.6.1.4.1.388.14.2.11.1.2.8.1.2
The identifier of the inbound IP ACL applied to the interface.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclInterfaceAclInboundMacAclId 1.3.6.1.4.1.388.14.2.11.1.2.8.1.3
The identifier of the inbound MAC ACL applied to the interface.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclInterfaceAclRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.8.1.4
The row status for this entry in the wsSwAclInterfaceAclTable.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclCountAllAcls 1.3.6.1.4.1.388.14.2.11.1.2.9
Count of all the ACLs present in the wireless switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..500  

wsSwAclNatIfTable 1.3.6.1.4.1.388.14.2.11.1.2.10
A table for configuring the type of an interface for NAT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclNatIfEntry

wsSwAclNatIfEntry 1.3.6.1.4.1.388.14.2.11.1.2.10.1
An entry in the wsSwAclNatIfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclNatIfEntry  

wsSwAclNatIfName 1.3.6.1.4.1.388.14.2.11.1.2.10.1.1
The name of the interface to be NATed.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclNatIfType 1.3.6.1.4.1.388.14.2.11.1.2.10.1.2
The interface type which is to be NAT'ed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER inside(1), outside(2)  

wsSwAclNatIfRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.10.1.3
The row status for this entry in the wsSwAclNatIfTable.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclStaticNatTable 1.3.6.1.4.1.388.14.2.11.1.2.11
A table for configuring static NAT entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclStaticNatEntry

wsSwAclStaticNatEntry 1.3.6.1.4.1.388.14.2.11.1.2.11.1
An entry in the static NAT table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclStaticNatEntry  

wsSwAclStaticNatIndex 1.3.6.1.4.1.388.14.2.11.1.2.11.1.1
The integer index for this entry in wsSwAclStaticNatTable.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..500  

wsSwAclStaticNatLocalAddr 1.3.6.1.4.1.388.14.2.11.1.2.11.1.2
The local IP address for this static NAT entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

wsSwAclStaticNatGlobalAddr 1.3.6.1.4.1.388.14.2.11.1.2.11.1.3
The global IP address for this static NAT entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

wsSwAclStaticNatIfType 1.3.6.1.4.1.388.14.2.11.1.2.11.1.4
The type (inside/outside) of the interface to be NAT'ed for this static NAT entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER inside(1), outside(2)  

wsSwAclStaticNatDirection 1.3.6.1.4.1.388.14.2.11.1.2.11.1.5
The direction of the interface (source or destination) in which NAT is to be applied for this static NAT mapping.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER source(1), destination(2)  

wsSwAclStaticNatLocalPort 1.3.6.1.4.1.388.14.2.11.1.2.11.1.6
The local NAT port used for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

wsSwAclStaticNatGlobalPort 1.3.6.1.4.1.388.14.2.11.1.2.11.1.7
The global NAT port used for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

wsSwAclStaticNatLocalProtocol 1.3.6.1.4.1.388.14.2.11.1.2.11.1.8
The local protocol for this static NAT entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

wsSwAclStaticNatRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.11.1.9
The row status for this entry in the wsSwAclStaticNatTable.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclDynamicNatTable 1.3.6.1.4.1.388.14.2.11.1.2.12
A table for configuring dynamic NAT entries in the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclDynamicNatEntry

wsSwAclDynamicNatEntry 1.3.6.1.4.1.388.14.2.11.1.2.12.1
An entry in the wsSwAclDynamicNatTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclDynamicNatEntry  

wsSwAclDynamicNatIndex 1.3.6.1.4.1.388.14.2.11.1.2.12.1.1
The simple integer index for the wsSwAclDynamicNatTable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4  

wsSwAclDynamicNatIfType 1.3.6.1.4.1.388.14.2.11.1.2.12.1.2
The type of the interface to be NAT'ed for this dynamic NAT entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER inside(1), outside(2)  

wsSwAclDynamicNatDirection 1.3.6.1.4.1.388.14.2.11.1.2.12.1.3
The direction of the interface (source or destination) in which NAT is to be applied.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER source(1), destination(2)  

wsSwAclDynamicNatAclId 1.3.6.1.4.1.388.14.2.11.1.2.12.1.4
The ACL identifier to be used in configuring this dynamic NAT entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclDynamicNatIfName 1.3.6.1.4.1.388.14.2.11.1.2.12.1.5
The name of the interface to which this dynamic NAT rule is applied.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclDynamicNatRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.12.1.6
The row status for this entry in the wsSwAclDynamicNatTable.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclNatTable 1.3.6.1.4.1.388.14.2.11.1.2.13
A table for showing the status of Network Address Translation entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclNatEntry

wsSwAclNatEntry 1.3.6.1.4.1.388.14.2.11.1.2.13.1
An entry in the wsSwAclNatTable, indexed by a simple integer, wsSwAclNatIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclNatEntry  

wsSwAclNatIndex 1.3.6.1.4.1.388.14.2.11.1.2.13.1.1
The integer index (NAT flow id) for this entry in wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..500  

wsSwAclNatInsideLocalAddress 1.3.6.1.4.1.388.14.2.11.1.2.13.1.2
The inside local IP address for this entry in wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wsSwAclNatInsideLocalPort 1.3.6.1.4.1.388.14.2.11.1.2.13.1.3
The inside local port for this entry in the wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclNatInsideGlobalAddress 1.3.6.1.4.1.388.14.2.11.1.2.13.1.4
The inside global IP address for this entry in wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wsSwAclNatInsideGlobalPort 1.3.6.1.4.1.388.14.2.11.1.2.13.1.5
The inside global port for this entry in the wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclNatOutsideLocalAddress 1.3.6.1.4.1.388.14.2.11.1.2.13.1.6
The outside local IP address for this entry in wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wsSwAclNatOutsideLocalPort 1.3.6.1.4.1.388.14.2.11.1.2.13.1.7
The outside local port for this entry in the wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclNatOutsideGlobalAddress 1.3.6.1.4.1.388.14.2.11.1.2.13.1.8
The outside global IP address for this entry in wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsSwAclNatOutsideGlobalPort 1.3.6.1.4.1.388.14.2.11.1.2.13.1.9
The outside global port for this entry in the wsSwAclNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclStatsTable 1.3.6.1.4.1.388.14.2.11.1.2.14
A table containing statistics per ACL rule/flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclStatsEntry

wsSwAclStatsEntry 1.3.6.1.4.1.388.14.2.11.1.2.14.1
An entry containing the statistics for an ACL rule/flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclStatsEntry  

wsSwAclStatsRuleId 1.3.6.1.4.1.388.14.2.11.1.2.14.1.1
The rule identifier for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

wsSwAclStatsAction 1.3.6.1.4.1.388.14.2.11.1.2.14.1.2
The action for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deny(1), permit(2), mark(3), sendToAlg(4), permitToLocalStack(5), permitFromLocalStack(6)  

wsSwAclStatsIfName 1.3.6.1.4.1.388.14.2.11.1.2.14.1.3
The interface name to which this ACL rule is applied.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsSwAclStatsPrecedence 1.3.6.1.4.1.388.14.2.11.1.2.14.1.4
The rule precedence for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..5000  

wsSwAclStatsProtocol 1.3.6.1.4.1.388.14.2.11.1.2.14.1.5
The protocol (IP/ICMP/TCP/UDCP) for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER icmp(1), ip(2), tcp(3), udp(4)  

wsSwAclStatsSrcIpLow 1.3.6.1.4.1.388.14.2.11.1.2.14.1.6
The low end of the range of source IP addresses for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wsSwAclStatsSrcIpHigh 1.3.6.1.4.1.388.14.2.11.1.2.14.1.7
The high end of the range of source IP addresses for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wsSwAclStatsSrcPortLow 1.3.6.1.4.1.388.14.2.11.1.2.14.1.8
The low end of the range of source port values for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclStatsSrcPortHigh 1.3.6.1.4.1.388.14.2.11.1.2.14.1.9
The high end of the range of source port values for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclStatsDestIpLow 1.3.6.1.4.1.388.14.2.11.1.2.14.1.10
The low end of the range of destination IP addresses for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wsSwAclStatsDestIpHigh 1.3.6.1.4.1.388.14.2.11.1.2.14.1.11
The high end of the range of destination IP addresses for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wsSwAclStatsDestPortLow 1.3.6.1.4.1.388.14.2.11.1.2.14.1.12
The low end of the range of destination port values for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclStatsDestPortHigh 1.3.6.1.4.1.388.14.2.11.1.2.14.1.13
The high end of the range of destination port values for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wsSwAclStatsTimesUsed 1.3.6.1.4.1.388.14.2.11.1.2.14.1.14
Number of times this flow rule has been used (either hits or drops).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wsSwAclStatsNumFlowsActive 1.3.6.1.4.1.388.14.2.11.1.2.14.1.15
The total number of active flows for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wsSwAclStatsNumFlowsTotal 1.3.6.1.4.1.388.14.2.11.1.2.14.1.16
The total number of flows for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wsSwAclStatsTotalInPkts 1.3.6.1.4.1.388.14.2.11.1.2.14.1.17
The total number of incoming packets for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wsSwAclStatsTotalOutPkts 1.3.6.1.4.1.388.14.2.11.1.2.14.1.18
The total number of outgoing packets for this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wsSwAclSetErrorA 1.3.6.1.4.1.388.14.2.11.1.2.15
The error message, if any, from the last set request to any of the following tablular or scalar objects: wsSwAclTable, wsSwAclClearAllAcls, wsSwAclStdIpAclTable, wsSwAclExtIpAclTable, wsSwAclExtIpAclIcmpTable, wsSwAclExtIpAclTcpUdpTable, wsSwAclExtMacAclTable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsSwAclSetErrorB 1.3.6.1.4.1.388.14.2.11.1.2.16
The error message, if any, from the last set request to any of the following tablular or scalar objects: wsSwAclInterfaceAclTable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsSwAclNatSetError 1.3.6.1.4.1.388.14.2.11.1.2.17
The error message, if any, from the last set request to any of the following tablular or scalar objects: wsSwAclNatIfTable, wsSwAclStaticNatTable, wsSwAclDynamicNatTable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsSwAclWlanAclTable 1.3.6.1.4.1.388.14.2.11.1.2.18
This table allows the user to configure the L2 ACLs on a per-WLAN basis rather than on the physical interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsSwAclWlanAclEntry

wsSwAclWlanAclEntry 1.3.6.1.4.1.388.14.2.11.1.2.18.1
An entry in the wsSwAclWlanAclTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsSwAclWlanAclEntry  

wsSwAclWlanIndex 1.3.6.1.4.1.388.14.2.11.1.2.18.1.1
The index of the WLAN which uniquely denotes a WLAN. This ranges from 1 to 256.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..256  

wsSwAclWlanAclDirection 1.3.6.1.4.1.388.14.2.11.1.2.18.1.2
The direction in which the ACL to be applied on this WLAN port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

wsSwAclWlanMacAclId 1.3.6.1.4.1.388.14.2.11.1.2.18.1.3
The name or number of the MAC ACL, which uniquely denotes the particular MAC ACL being applied on this WLAN.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclWlanIpAclId 1.3.6.1.4.1.388.14.2.11.1.2.18.1.4
The name or number of the IP ACL, which uniquely denotes the particular IP ACL being applied on this WLAN.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

wsSwAclWlanAclRowStatus 1.3.6.1.4.1.388.14.2.11.1.2.18.1.5
SNMP row status to create/configure this entry.
Status: current Access: read-create
OBJECT-TYPE    
  AbbrevRowStatus  

wsSwAclConformance 1.3.6.1.4.1.388.14.2.11.1.2.100
OBJECT IDENTIFIER    

wsSwAclGroups 1.3.6.1.4.1.388.14.2.11.1.2.100.1
OBJECT IDENTIFIER    

wsSwAclGroup 1.3.6.1.4.1.388.14.2.11.1.2.100.1.1
Group of ACL and NAT objects
Status: current Access: read-create
OBJECT-GROUP    

wsSwAclDeprecatedGroup 1.3.6.1.4.1.388.14.2.11.1.2.100.1.2
Group of deprecated objects.
Status: deprecated Access: read-create
OBJECT-GROUP    

wsSwAclCompls 1.3.6.1.4.1.388.14.2.11.1.2.100.2
OBJECT IDENTIFIER