WL400-DOT11EXT-MIB
File:
WL400-DOT11EXT-MIB.mib (28821 bytes)
Imported modules
Imported symbols
Defined Types
AssocEntry |
|
SEQUENCE |
|
|
|
|
assocIndex |
Integer32 |
|
|
assocAddress |
MacAddress |
|
|
assocQuality |
Integer32 |
|
|
assocAge |
Integer32 |
|
|
assocRSSI |
Integer32 |
|
SecMACAclEntry |
|
SEQUENCE |
|
|
|
|
secMACAclIndex |
Integer32 |
|
|
secMACAclAddress |
MacAddress |
|
|
secMACAclAllowed |
TruthValue |
|
|
secMACAclRowStatus |
RowStatus |
|
RoamEntry |
|
SEQUENCE |
|
|
|
|
roamIndex |
Integer32 |
|
|
roamBSSID |
MacAddress |
|
|
roamSSID |
OCTET STRING |
|
|
roamBSSType |
INTEGER |
|
|
roamChannel |
Integer32 |
|
|
roamAge |
Integer32 |
|
|
roamQuality |
Integer32 |
|
|
roamLoad |
Integer32 |
|
|
roamBeaconPeriod |
Integer32 |
|
|
roamDTIMPeriod |
Integer32 |
|
|
roamCapabilityInfo |
BITS |
|
|
roamRates |
OCTET STRING |
|
|
roamRSSI |
Integer32 |
|
Defined Values
dot11ExtMibModule |
1.3.6.1.4.1.232.143.1.2 |
The 802.11 Extension MIB module. |
MODULE-IDENTITY |
|
|
|
smt |
1.3.6.1.4.1.232.145.1.2.1 |
OBJECT IDENTIFIER |
|
|
|
assoc |
1.3.6.1.4.1.232.145.1.3.1 |
OBJECT IDENTIFIER |
|
|
|
security |
1.3.6.1.4.1.232.145.1.3.2 |
OBJECT IDENTIFIER |
|
|
|
roam |
1.3.6.1.4.1.232.145.1.5.1 |
OBJECT IDENTIFIER |
|
|
|
smtAssociationID |
1.3.6.1.4.1.232.145.1.2.1.1 |
The Association ID of an association between an Access
Point and a Station. The size constraint is taken from
IEEE 802.11 section 7.3.1.8. For an Access Point, this
object is always zero. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2007 |
|
smtCapabilityInfo |
1.3.6.1.4.1.232.145.1.2.1.2 |
The Capability Information of this entity. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
privacy(0), cfPollRequest(1), cfPollable(2), ibss(3), ess(4) |
|
smtPowerSaveInterval |
1.3.6.1.4.1.232.145.1.2.1.3 |
The time limit, in units of beacon intervals, after which
the Client will go into Power Save Mode if the Client does
not detect activity. For an Access Point, this object is
always zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtListenInterval |
1.3.6.1.4.1.232.145.1.2.1.4 |
The time, in units of beacon intervals, that may pass before
the Client awakens and listens for the next Beacon. For an
Access Point, this object is always zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtATIMWindow |
1.3.6.1.4.1.232.145.1.2.1.5 |
The duration of the ATIM Window, in TUs. For an Access Point,
this object is always zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtOperationalChannels |
1.3.6.1.4.1.232.145.1.2.1.6 |
The list of DS channels that shall be scanned with a higher
priority. All channels allowed by the current regulatory
domain are scanned, the channels specified in this object
are visited more frequently compared to the channels not in
the set of this object. If the object is null, the PHY will
default to the channel configured by dot11CurrentChannel. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
smtCurrentBSSID |
1.3.6.1.4.1.232.145.1.2.1.7 |
The current Basic Service Set ID. For a Client, this object
either contains the BSSID of the Access Point with which the
Client is associated or the BSSID of the IBSS it is currently
participating in (smtCurrentBSSType indicates which of the two
cases holds). If the object is all zeros, the Client is not
associated or participating in an IBSS. For an Access Point,
this object contains the BSSID of the Access Point. If the
Access Point is in the process of resetting, the object is all
zeros. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
smtCurrentSSID |
1.3.6.1.4.1.232.145.1.2.1.8 |
The current Service Set ID. For a Client, this object either
contains the SSID of the infrastructure network or the SSID
of the IBSS it currently associated with or participating in.
For an Access Point, this object contains the BSSID of the
Access Point. If the Access Point is resetting, the object
is null. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
smtCurrentBSSType |
1.3.6.1.4.1.232.145.1.2.1.9 |
The type of the Basic Service Set. For a Client, this object
indicates the type of SS it currently is associated with,
participating in. For an Access Point, this object is 1
(infrastructure). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
infrastructure(1), adhoc(2) |
|
smtPublicKeyEnable |
1.3.6.1.4.1.232.145.1.2.1.10 |
This object specifies whether public-key techniques shall be
used to negotiate keys. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
smtQualityLevel0 |
1.3.6.1.4.1.232.145.1.2.1.11 |
This object relates quality level to a transmission rate.
Level 0 specifies the lowest (basic) rate. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtQualityLevel1 |
1.3.6.1.4.1.232.145.1.2.1.12 |
This object relates quality level to a transmission rate.
Level 1 specifies the second lowest (basic) rate. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtQualityLevel2 |
1.3.6.1.4.1.232.145.1.2.1.13 |
This object relates quality level to a transmission rate.
Level 2 specifies the an arbitrary (higher) rate. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtQualityPenalty |
1.3.6.1.4.1.232.145.1.2.1.14 |
This object specifies a quality penalty for transmission
failures. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtStationDBTimeout |
1.3.6.1.4.1.232.145.1.2.1.15 |
This object specifies a timeout on entries and their state
information in the Station database. For Clients the Station
database is mapped on the roamTable. For Access Points, the
Station database is mapped on the assocTable. The timeout
is in seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtQualityIndicator |
1.3.6.1.4.1.232.145.1.2.1.16 |
This object selects the quality indicator from the baseband.
Current quality indicators are:
1 = Signal Quality 1 (SQ1)
2 = Signal Quality 2 (SQ2)
3 = Signal Quality 3 (SQ3) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..3 |
|
smtCWMin |
1.3.6.1.4.1.232.145.1.2.1.20 |
The CWMin value as defined by IEEE 802.11. Needs to be a power
of 2, minus 1. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtCWMax |
1.3.6.1.4.1.232.145.1.2.1.21 |
The CWMax value as defined by IEEE 802.11. Needs to be a power
of 2, minus 1, larger than or equal to smtCWMin. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
smtACKWindow |
1.3.6.1.4.1.232.145.1.2.1.22 |
The ACK frame time out defined in number of slottimes. This
can be used to optimize long range links. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
assocTableMaxLength |
1.3.6.1.4.1.232.145.1.3.1.1 |
This object specifies the maximum number of associations
the assocTable can hold. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
assocTable |
1.3.6.1.4.1.232.145.1.3.1.2 |
The Association table. This table contains all the Clients
associated with the Access Point. The index of the entry
equals the Association ID of the Client with the Access Point.
An entry in the table is only valid if the assocAddress
object of that entry contains a MAC address other then the
all zeros MAC address.
Refer to sections 5.7 and 11.3 of the 802.11 standard for
more information on associations. The table is read-only. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AssocEntry |
|
assocEntry |
1.3.6.1.4.1.232.145.1.3.1.2.1 |
An entry in the Association Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AssocEntry |
|
|
assocIndex |
1.3.6.1.4.1.232.145.1.3.1.2.1.1 |
The index into the association table. The index equals the
association ID that is in use for the Client. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2007 |
|
assocAddress |
1.3.6.1.4.1.232.145.1.3.1.2.1.2 |
MAC address of a Client associated with the Access Point.
If the association is pending (that is, the Client is scanning,
authenticating or associating), assocAddress contains the MAC
address of that Client with the group bit set to indicate that
the Access Point is aware of the presence of that Client. The
other objects of the entry will be updated based on the
information extracted from the received Probe Requests. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
assocQuality |
1.3.6.1.4.1.232.145.1.3.1.2.1.3 |
An indicator for the quality of the Client. If the association
is still pending, the quality is calculated over the received
Probe Requests from the Client. If the Client is associated,
the quality derived from any activity with the Client. The actual
quality source depends on the selected quality indicator.
The semantics of the indicator is 'low is good quality' and
'high is bad quality'. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
assocAge |
1.3.6.1.4.1.232.145.1.3.1.2.1.4 |
An indicator (in seconds) for the age of the information
on the Client. The age is reset to 0 if any activity of
this Client is detected. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
secMACAclMaxTableLength |
1.3.6.1.4.1.232.145.1.3.2.1 |
The maximum number of entries that the secMACAclTable
can contain. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
secMACAclTable |
1.3.6.1.4.1.232.145.1.3.2.2 |
The table containing an access control list (acl) with MAC
addresses of 802.11 Clients and whether they are allowed
to communicate with the wireless network through this Access
Point. This table enforces a source address check.
An address of FF-FF-FF-FF-FF-FF is used as a default entry,
i.e., it determines the access control for Clients that are
otherwise not listed in this table.
When the table is empty, every Client is denied. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SecMACAclEntry |
|
secMACAclEntry |
1.3.6.1.4.1.232.145.1.3.2.2.1 |
An entry in the table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SecMACAclEntry |
|
|
secMACAclIndex |
1.3.6.1.4.1.232.145.1.3.2.2.1.1 |
The index into the secMACAclTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2007 |
|
secMACAclAddress |
1.3.6.1.4.1.232.145.1.3.2.2.1.2 |
The MAC address of a Client allowed to join the
network through this Access Point.
The address FF-FF-FF-FF-FF-FF constitutes the
default behaviour for addresses not contained
in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
secMACAclAllowed |
1.3.6.1.4.1.232.145.1.3.2.2.1.3 |
The flag indicating whether the corresponding MAC
address is allowed to communicate through this
Access Point or not. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
secMACAclRowStatus |
1.3.6.1.4.1.232.145.1.3.2.2.1.4 |
The status value for creating and deleting rows
in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
secLastError |
1.3.6.1.4.1.232.145.1.3.2.3 |
When a security violation or error occurs, the error
code is written to this variable in the form of a string. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..80) |
|
secLastErrorAddress |
1.3.6.1.4.1.232.145.1.3.2.4 |
When a security violation or error occurs, the MAC
address involved in the violation or error is written
to this variable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
securityViolation |
1.3.6.1.4.1.232.145.1.4.0.1 |
A security violation was detected. The secLastErrorCode
indicates the type of error/violation, the
secLastErrorAddress indicates the involved MAC address. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
roamScanType |
1.3.6.1.4.1.232.145.1.5.1.1 |
This object configures the type of scanning the Client uses. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
passive(0), active(1) |
|
roamScanInterval |
1.3.6.1.4.1.232.145.1.5.1.2 |
The interval, in units of beacon intervals, between
successive scans during an association. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamProbeDelay |
1.3.6.1.4.1.232.145.1.5.1.3 |
This object specifies the delay (in ms) to be used prior
to transmitting a Probe frame during active scanning. The
object implements the ProbeDelay parameter of the
MLME-SCAN.request primitive as defined in section 10.3.2.1
of the 802.11 standard. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamMinChannelTime |
1.3.6.1.4.1.232.145.1.5.1.4 |
This object specifies the minimum time (in time units) to
spend on each channel when scanning. The object implements
the MinChannelTime parameter in the MLME-SCAN.request
primitive as defined in section 10.3.2.1 of the 802.11
standard. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamMaxChannelTime |
1.3.6.1.4.1.232.145.1.5.1.5 |
This object specifies the maximum time (in time units) to
spend on each channel when scanning. The object implements
the MaxChannelTime parameter in the MLME-SCAN.request
primitive as defined in section 10.3.2.1 of the 802.11
standard. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamJoinTimeout |
1.3.6.1.4.1.232.145.1.5.1.6 |
The firmware will keep trying to find a suitable BSS until
another MLME-JOIN.request is issued. The object roamJoinTimeout
allows the application to estimate how long it at least has to
wait before it can assume that MLME-JOIN.request is likely to
fail. The object should be considered for information
purposes. Changing the object will have no effect.
Future versions may use this object to limit the time it
spends to try to join a specific Service Set. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamBeaconPeriodTimeout |
1.3.6.1.4.1.232.145.1.5.1.7 |
The time limit, in units of beacon intervals, after which
the association is voided if no beacons are received. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamDontSwitch |
1.3.6.1.4.1.232.145.1.5.1.8 |
The time limit, in units of beacon intervals, during which
the Client will not use BSS quality parameters for making
the roaming decissions if it becomes associated with an
Access Point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamBlackout |
1.3.6.1.4.1.232.145.1.5.1.9 |
The time, in units of beacon intervals, during which the BSS
is not considered candidate after the association was denied
or voided. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamDisassociateTime |
1.3.6.1.4.1.232.145.1.5.1.10 |
The time, in units of beacon intervals, taken by the
Disassociate procedure. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamHandoffTime |
1.3.6.1.4.1.232.145.1.5.1.11 |
Time, in time units, during which data to the Access Point is
hold before a handoff is performed. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric1 |
1.3.6.1.4.1.232.145.1.5.1.12 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric2 |
1.3.6.1.4.1.232.145.1.5.1.13 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric3 |
1.3.6.1.4.1.232.145.1.5.1.14 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric4 |
1.3.6.1.4.1.232.145.1.5.1.15 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric5 |
1.3.6.1.4.1.232.145.1.5.1.16 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric6 |
1.3.6.1.4.1.232.145.1.5.1.17 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric7 |
1.3.6.1.4.1.232.145.1.5.1.18 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamWeightMetric8 |
1.3.6.1.4.1.232.145.1.5.1.19 |
A metric used to make roaming decisions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamMisc1 |
1.3.6.1.4.1.232.145.1.5.1.20 |
A misc roaming value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamMisc2 |
1.3.6.1.4.1.232.145.1.5.1.21 |
A misc roaming value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamTableLength |
1.3.6.1.4.1.232.145.1.5.1.22 |
This object specifies the maximum number of entries the
roamTable can hold. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamTable |
1.3.6.1.4.1.232.145.1.5.1.23 |
The Roaming table contains all the BSSs the Client is aware
of. An entry in the roamTable is only valid if the roamBSSID
object of that entry contains a MAC address other then the
all zeros MAC address.
The table implements the BSSDescription table as defined in
10.3.2.2 of the 802.11 standard. This table is read-only. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RoamEntry |
|
roamEntry |
1.3.6.1.4.1.232.145.1.5.1.23.1 |
An entry in the Roaming table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RoamEntry |
|
|
roamIndex |
1.3.6.1.4.1.232.145.1.5.1.23.1.1 |
The index into the table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamBSSID |
1.3.6.1.4.1.232.145.1.5.1.23.1.2 |
The BSSID of the BSS. If this entry in the roamTable
is not used, the roamBSSID is all zeros. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
roamSSID |
1.3.6.1.4.1.232.145.1.5.1.23.1.3 |
The Service Set ID the BSS is part of. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
roamBSSType |
1.3.6.1.4.1.232.145.1.5.1.23.1.4 |
The BSS Type of the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
infrastructure(1), independent(2) |
|
roamChannel |
1.3.6.1.4.1.232.145.1.5.1.23.1.5 |
The DS channel the BSS is using. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamAge |
1.3.6.1.4.1.232.145.1.5.1.23.1.6 |
An indicator (in seconds) for the age of the information
on the BSS. The age is reset to 0 if a Beacon of this
BSS is received. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamQuality |
1.3.6.1.4.1.232.145.1.5.1.23.1.7 |
An indicator for the quality of the BSS. The quality is
calculated over the received Beacons of the BSS and depends
on the selected quality indicator. The semantics of the
indicator is 'low is good quality' and 'high is bad quality'. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamLoad |
1.3.6.1.4.1.232.145.1.5.1.23.1.8 |
An indicator for the load of the BSS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamBeaconPeriod |
1.3.6.1.4.1.232.145.1.5.1.23.1.9 |
The beacon period (in time units) of this BSS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamDTIMPeriod |
1.3.6.1.4.1.232.145.1.5.1.23.1.10 |
The DTIM period of this BSS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
roamCapabilityInfo |
1.3.6.1.4.1.232.145.1.5.1.23.1.11 |
The Capability Information for this BSS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
privacy(0), cfPollRequest(1), cfPollable(2), ibss(3), ess(4) |
|
roamRates |
1.3.6.1.4.1.232.145.1.5.1.23.1.12 |
The bit rates supported by the BSS. The least-significant 7
bits of each non-null octet value are a count from 00h -7Fh,
corresponding to data rates in increments of 500Kbit/s. The
most-significant bit of each non-null octet is set to one if
the data rate represented by this octet is a member of the
basic rate set and is set to zero if this data rate is
optional. The list ends with a null octet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
smtGroup |
1.3.6.1.4.1.232.145.1.1.1.1 |
The additional objects for Station Management |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
assocGroup |
1.3.6.1.4.1.232.145.1.1.1.2 |
The association group |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
securityGroup |
1.3.6.1.4.1.232.145.1.1.1.3 |
The security group |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
secNotificationGroup |
1.3.6.1.4.1.232.145.1.1.1.4 |
The security-related notifications. |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|
roamGroup |
1.3.6.1.4.1.232.145.1.1.1.5 |
The roaming group |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
dot11ExtBasicCompl |
1.3.6.1.4.1.232.145.1.1.2.1 |
The implementation requirements for an IEEE 802.11 Station. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
dot11ExtAPCompl |
1.3.6.1.4.1.232.145.1.1.2.2 |
The implementation requirements for an Access Point. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
dot11ExtWBUCompl |
1.3.6.1.4.1.232.145.1.1.2.3 |
The implementation requirements for a WBU. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|