WIRELESS-MIB
File:
WIRELESS-MIB.mib (25142 bytes)
Imported modules
Imported symbols
Defined Types
WrBaseEntry |
|
SEQUENCE |
|
|
|
|
baseIfIndex |
INTEGER |
|
|
baseHDLCaddress |
INTEGER |
|
|
baseNbOFRemote |
INTEGER |
|
|
baseCellIdentifier |
INTEGER |
|
|
baseAdapterStatus |
INTEGER |
|
|
baseEmittedPower |
INTEGER |
|
|
baseControllerCardDesc |
DisplayString |
|
|
baseUnivAddress |
MacAddress |
|
|
baseModemDesc |
DisplayString |
|
|
baseTopologyTrapActive |
INTEGER |
|
WrBaseStatsEntry |
|
SEQUENCE |
|
|
|
|
baseStatsIfIndex |
INTEGER |
|
|
baseStatsXmit |
Counter |
|
|
baseStatsRxmit |
Counter |
|
|
baseStatsNegAckRcv |
Counter |
|
|
baseStatsRcv |
Counter |
|
|
baseStatsLineErrors |
Counter |
|
|
baseStatsNegAckXmit |
Counter |
|
|
baseStatsFramePurged |
Counter |
|
|
baseStatsFreqDelete |
Counter |
|
|
baseStatsHopAdvance |
Counter |
|
|
baseStatsCLineErrors |
Counter |
|
|
baseStatsRcvICRFrame |
Counter |
|
|
baseStatsXmitICRFrame |
Counter |
|
|
baseStatsNoICRBufferAvail |
Counter |
|
|
baseStatsNotRoutedICRFrame |
Counter |
|
|
baseStatsNbCUserEst |
Gauge |
|
WrRemoteEntry |
|
SEQUENCE |
|
|
|
|
remIfIndex |
INTEGER |
|
|
remIndex |
INTEGER |
|
|
remMacAddress |
MacAddress |
|
|
remName |
DisplayString |
|
|
remControllerCardDesc |
DisplayString |
|
|
remUnivAddress |
MacAddress |
|
|
remModemDesc |
DisplayString |
|
WrRemStatsEntry |
|
SEQUENCE |
|
|
|
|
remStatsIfIndex |
INTEGER |
|
|
remStatsIndex |
INTEGER |
|
|
remStatsXmit |
Counter |
|
|
remStatsRxmit |
Counter |
|
|
remStatsNegAckRcv |
Counter |
|
|
remStatsRcv |
Counter |
|
|
remStatsLineErrors |
Counter |
|
|
remStatsNegAckXmit |
Counter |
|
Defined Values
ibm |
1.3.6.1.4.1.2 |
OBJECT IDENTIFIER |
|
|
|
ibmProd |
1.3.6.1.4.1.2.6 |
OBJECT IDENTIFIER |
|
|
|
ibmwlan |
1.3.6.1.4.1.2.6.10 |
OBJECT IDENTIFIER |
|
|
|
wrBase |
1.3.6.1.4.1.2.6.10.1 |
OBJECT IDENTIFIER |
|
|
|
wrRemote |
1.3.6.1.4.1.2.6.10.2 |
OBJECT IDENTIFIER |
|
|
|
baseName |
1.3.6.1.4.1.2.6.10.1.1 |
Name of the Base Station assigned through the Wireless
Network Administration Program. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
baseNetworkName |
1.3.6.1.4.1.2.6.10.1.2 |
Name of the Wireless Network containing the Base Station.
This name has been assigned through the Wireless Network
Administration Program. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
baseAdminIPAddr |
1.3.6.1.4.1.2.6.10.1.3 |
IP Address of the station housing the Wireless Network
Administration Program. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
wrBaseTable |
1.3.6.1.4.1.2.6.10.1.4 |
This table contains wireless interface parameters and state
variables, one entry per wireless interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WrBaseEntry |
|
wrBaseEntry |
1.3.6.1.4.1.2.6.10.1.4.1 |
An entry contains wireless parameters and state
variables for a particular interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WrBaseEntry |
|
|
baseIfIndex |
1.3.6.1.4.1.2.6.10.1.4.1.1 |
The value of this object identifies the wireless
interface for which this entry contains management
information. The value of this object for a particular
interface has the same value as the IfIndex object
defined in MIB-II for the same interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
baseHDLCaddress |
1.3.6.1.4.1.2.6.10.1.4.1.2 |
HDLC address of the wireless interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
baseNbOFRemote |
1.3.6.1.4.1.2.6.10.1.4.1.3 |
Number of wireless workstations registered
to the wireless interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
baseCellIdentifier |
1.3.6.1.4.1.2.6.10.1.4.1.4 |
Identifier of the cell controlled
by the wireless interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
baseAdapterStatus |
1.3.6.1.4.1.2.6.10.1.4.1.5 |
Status of the wireless interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
operational(1), not-operational(2) |
|
baseEmittedPower |
1.3.6.1.4.1.2.6.10.1.4.1.6 |
Emitted power of the wireless interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
baseControllerCardDesc |
1.3.6.1.4.1.2.6.10.1.4.1.7 |
Vital Product Data of the wireless controller card
performing the wireless interface function. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
baseUnivAddress |
1.3.6.1.4.1.2.6.10.1.4.1.8 |
Universal address of the wireless controller card
performing the wireless interface function. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
baseModemDesc |
1.3.6.1.4.1.2.6.10.1.4.1.9 |
Vital Product Data of the transceiver
performing the wireless interface function. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
baseTopologyTrapActive |
1.3.6.1.4.1.2.6.10.1.4.1.10 |
Traps will be sent when wireless workstation
registers to and deregisters from the wireless
interface only if this object is set to active. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), inactive(2) |
|
wrBaseStatsTable |
1.3.6.1.4.1.2.6.10.1.5 |
This table contains wireless interface statistics,
one entry per wireless interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WrBaseStatsEntry |
|
wrBaseStatsEntry |
1.3.6.1.4.1.2.6.10.1.5.1 |
An entry contains wireless statistics for a particular
interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WrBaseStatsEntry |
|
|
baseStatsIfIndex |
1.3.6.1.4.1.2.6.10.1.5.1.1 |
The value of this object identifies the wireless
interface for which this entry contains management
information. The value of this object for a particular
interface has the same value as the IfIndex object
defined in MIB-II for the same interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
baseStatsXmit |
1.3.6.1.4.1.2.6.10.1.5.1.2 |
Number of packets transmitted over the wireless
interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsRxmit |
1.3.6.1.4.1.2.6.10.1.5.1.3 |
Number of packets retransmitted over
the wireless interface due to a lack
of positive acknowledgement. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsNegAckRcv |
1.3.6.1.4.1.2.6.10.1.5.1.4 |
Number of negative acknowledgement received over
the wireless interface (workstations congestion
indicator). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsRcv |
1.3.6.1.4.1.2.6.10.1.5.1.5 |
Number of packets received over the wireless interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsLineErrors |
1.3.6.1.4.1.2.6.10.1.5.1.6 |
Number of slots assigned to wireless workstations
that fail to use or that fail to receive (HDLC error). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsNegAckXmit |
1.3.6.1.4.1.2.6.10.1.5.1.7 |
Number of negative acknowledgement transmitted over
the wireless interface (base congestion indicator). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsFramePurged |
1.3.6.1.4.1.2.6.10.1.5.1.8 |
Number of frames that were purged by the wireless
interface because they were corrupted during air
transmission. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsFreqDelete |
1.3.6.1.4.1.2.6.10.1.5.1.9 |
Number of times a single frequency had
to be replaced in the frequency hopping
pattern because an excessive level of
interference was detected for that
frequency. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsHopAdvance |
1.3.6.1.4.1.2.6.10.1.5.1.10 |
Number of times a hop advance procedure
had to be performed because an excessive
level of interference was detected for each
frequency of the hopping pattern. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsCLineErrors |
1.3.6.1.4.1.2.6.10.1.5.1.11 |
Number of times the first packet of a frame
was received over the wireless interface
with an HDLC error. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsRcvICRFrame |
1.3.6.1.4.1.2.6.10.1.5.1.12 |
Number of frames received by the base station
on the wireless interface that must be
forwarded to one or more wireless workstations
registered to the same wireless interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsXmitICRFrame |
1.3.6.1.4.1.2.6.10.1.5.1.13 |
Number of frames forwarded by the base station
from a wireless workstation to another one.
This counter may be incremented several times
for the same frame if it is a broadcast frame. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsNoICRBufferAvail |
1.3.6.1.4.1.2.6.10.1.5.1.14 |
Number of frames received on the wireless
interface coming from a wireless
workstation and going to another
wireless workstation registered to the same
wireless interface that had to be discarded
due to a lack of resources. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsNotRoutedICRFrame |
1.3.6.1.4.1.2.6.10.1.5.1.15 |
Number of frames received on the wireless
interface coming from a wireless
workstation and going to another
wireless workstation that were discarded
because the target wireless workstation
could not be found. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
baseStatsNbCUserEst |
1.3.6.1.4.1.2.6.10.1.5.1.16 |
Number of wireless workstation trying
to transmit in C interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
wrRemoteTable |
1.3.6.1.4.1.2.6.10.2.1 |
This table contains management information
for the wireless workstations registered to the
wireless interfaces, one entry per registered
wireless workstation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WrRemoteEntry |
|
wrRemoteEntry |
1.3.6.1.4.1.2.6.10.2.1.1 |
An entry contains management information for a particular
wireless workstation. An object of this type is transient
in that it ceases to exist when (or soon after) the
wireless workstation deregisters from the base. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WrRemoteEntry |
|
|
remIfIndex |
1.3.6.1.4.1.2.6.10.2.1.1.1 |
The value of this object identifies the wireless
interface to which is registered the workstation for
which this entry contains management information.
The value of this object for a particular
interface has the same value as the IfIndex object
defined in MIB-II for the same interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
remIndex |
1.3.6.1.4.1.2.6.10.2.1.1.2 |
The value of this object identifies the registered wireless
workstation for which this entry contains management information.
This value has been dynamically assigned to the wireless
workstation when it registered to the base. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
remMacAddress |
1.3.6.1.4.1.2.6.10.2.1.1.3 |
MAC address of the wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
remName |
1.3.6.1.4.1.2.6.10.2.1.1.4 |
Name of the wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
remUnivAddress |
1.3.6.1.4.1.2.6.10.2.1.1.6 |
Universal address of the wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
remModemDesc |
1.3.6.1.4.1.2.6.10.2.1.1.7 |
Transceiver Vital Product Data of the wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wrRemoteStatsTable |
1.3.6.1.4.1.2.6.10.2.2 |
This table contains statistics information
for the wireless workstations registered to the
wireless interfaces, one entry per registered
wireless workstation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WrRemStatsEntry |
|
wrRemStatsEntry |
1.3.6.1.4.1.2.6.10.2.2.1 |
An entry contains statistics information for a particular
wireless workstation. An object of this type is transient
in that it ceases to exist when (or soon after) the
wireless workstation deregisters from the base. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WrRemStatsEntry |
|
|
remStatsIfIndex |
1.3.6.1.4.1.2.6.10.2.2.1.1 |
The value of this object identifies the wireless
interface to which is registered the workstation for
which this entry contains management information.
The value of this object for a particular
interface has the same value as the IfIndex object
defined in MIB-II for the same interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
remStatsIndex |
1.3.6.1.4.1.2.6.10.2.2.1.2 |
The value of this object identifies the wireless workstation
for which this entry contains statistics information.
This value has been dynamically assigned to the wireless
workstation when it registered to the base. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
remStatsXmit |
1.3.6.1.4.1.2.6.10.2.2.1.3 |
Number of packets transmitted over the wireless interface
to this particular wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
remStatsRxmit |
1.3.6.1.4.1.2.6.10.2.2.1.4 |
Number of packets retried over the wireless interface
due to a lack of positive acknowledgement from
this particular wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
remStatsNegAckRcv |
1.3.6.1.4.1.2.6.10.2.2.1.5 |
Number of Out of Sequences Packets received over
the wireless interface from this particular
wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
remStatsRcv |
1.3.6.1.4.1.2.6.10.2.2.1.6 |
Number of packets received over the wireless interface
from this particular wireless workstation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
remStatsLineErrors |
1.3.6.1.4.1.2.6.10.2.2.1.7 |
Number of slots assigned to this particular wireless
workstation that fail to use or that fail to receive
(HDLC error). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
remStatsNegAckXmit |
1.3.6.1.4.1.2.6.10.2.2.1.8 |
Number of negative acknowledgement transmitted to a
given workstation over the wireless interface
(base congestion indicator). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|