WINS-MIB

File: WINS-MIB.mib (26237 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB MSFT-MIB

Imported symbols

enterprises Counter OBJECT-TYPE
IpAddress DisplayString microsoft
software

Defined Types

DFDatafileEntry  
SEQUENCE    
  dfDatafileIndex INTEGER
  dfDatafileName DisplayString

PullPnrEntry  
SEQUENCE    
  pullPnrAdd IpAddress
  pullPnrSpTime DisplayString
  pullPnrTimeInterval INTEGER
  pullPnrMemberPrec INTEGER low(0), high(1)
  pullPnrNoOfSuccRpls Counter
  pullPnrNoOfCommFails Counter
  pullPnrVersNoLowWord Counter
  pullPnrVersNoHighWord Counter

PushPnrEntry  
SEQUENCE    
  pushPnrAdd IpAddress
  pushPnrUpdateCount INTEGER

CmdDRRecordEntry  
SEQUENCE    
  cmdDRRecordName DisplayString
  cmdDRRecordAddress OCTET STRING
  cmdDRRecordType INTEGER
  cmdDRRecordPersistenceType INTEGER
  cmdDRRecordState INTEGER

Defined Values

wins 1.3.6.1.4.1.311.1.2
OBJECT IDENTIFIER    

par 1.3.6.1.4.1.311.1.2.1
OBJECT IDENTIFIER    

pull 1.3.6.1.4.1.311.1.2.2
OBJECT IDENTIFIER    

push 1.3.6.1.4.1.311.1.2.3
OBJECT IDENTIFIER    

datafiles 1.3.6.1.4.1.311.1.2.4
OBJECT IDENTIFIER    

cmd 1.3.6.1.4.1.311.1.2.5
OBJECT IDENTIFIER    

parWinsStartTime 1.3.6.1.4.1.311.1.2.1.1
Wins start time
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastPScvTime 1.3.6.1.4.1.311.1.2.1.2
Most recent date and time at which planned scavenging took place. Planned scavenging happens at intervals specified in the registry. Scavenging involves changing owned non-refreshed entries to the released state. Further, replicas may be changed to tombstones, tombstones maye be deleted and revalidation of old replicas may take place
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastATScvTime 1.3.6.1.4.1.311.1.2.1.3
Most recent data and time at which scavenging as a result of administrative action took place
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastTombScvTime 1.3.6.1.4.1.311.1.2.1.4
Most recent data and time at which replica tombstone scavenging took place
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastVerifyScvTime 1.3.6.1.4.1.311.1.2.1.5
Most recent data and time at which revalidation of old active replicas took place
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastPRplTime 1.3.6.1.4.1.311.1.2.1.6
Most recent data and time at which planned replication took place. Planned replication happens at intervals specified in the registry
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastATRplTime 1.3.6.1.4.1.311.1.2.1.7
Most recent data and time at which administrator triggered replication took place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastNTRplTime 1.3.6.1.4.1.311.1.2.1.8
Most recent data and time at which network triggered replication took place. Network triggered replication happens as a result of an update notification message from a remote WINS
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastACTRplTime 1.3.6.1.4.1.311.1.2.1.9
Most recent data and time at which address change triggered replication took place. Address change triggered replication happens when the address of an owned name changes due to a new registration
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastInitDbTime 1.3.6.1.4.1.311.1.2.1.10
Most recent data and time at which the local database was populated statically from one or more data files
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parLastCounterResetTime 1.3.6.1.4.1.311.1.2.1.11
Most recent data and time at which the local counters were initialized to zero
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

parWinsTotalNoOfReg 1.3.6.1.4.1.311.1.2.1.12
This variable indicates the number of registrations received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

parWinsTotalNoOfQueries 1.3.6.1.4.1.311.1.2.1.13
This variable indicates the number of queries received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

parWinsTotalNoOfRel 1.3.6.1.4.1.311.1.2.1.14
This variable indicates the number of releases received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

parWinsTotalNoOfSuccRel 1.3.6.1.4.1.311.1.2.1.15
This variable indicates the number of releases that succeeded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

parWinsTotalNoOfFailRel 1.3.6.1.4.1.311.1.2.1.16
This variable indicates the number of releases that failed
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

parWinsTotalNoOfSuccQueries 1.3.6.1.4.1.311.1.2.1.17
This variable indicates the number of queries that succeeded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

parWinsTotalNoOfFailQueries 1.3.6.1.4.1.311.1.2.1.18
This variable indicates the number of queries that failed
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

parRefreshInterval 1.3.6.1.4.1.311.1.2.1.19
This variable indicates the refresh interval. Unit is in milliseconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

parTombstoneInterval 1.3.6.1.4.1.311.1.2.1.20
This variable indicates the tombstone interval, Unit is in milliseconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

parTombstoneTimeout 1.3.6.1.4.1.311.1.2.1.21
This variable indicates the tombstone timeout. Unit is in milliseconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

parVerifyInterval 1.3.6.1.4.1.311.1.2.1.22
This variable indicates the verify interval Unit is in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

parVersCounterStartValLowWord 1.3.6.1.4.1.311.1.2.1.23
This variable indicates the low word of the version counter that WINS should start with
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

parVersCounterStartValHighWord 1.3.6.1.4.1.311.1.2.1.24
This variable indicates the High word of the version counter that WINS should start with
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

parRplOnlyWCnfPnrs 1.3.6.1.4.1.311.1.2.1.25
This variable indicates whether or not replication should be done with non-configures pnrs. If not set to zero, replication will be done only with partners listed in the registry (except when an update notification comes in)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

parStaticDataInit 1.3.6.1.4.1.311.1.2.1.26
This variable indicates whether Static data should be read in at initialization and reconfiguration time. Update of any mib variable in the parameters group constitutes reconfigurations
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

parLogFlag 1.3.6.1.4.1.311.1.2.1.27
This variable indicates whether logging should be done. Default behaviour is to do logging
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

parLogFileName 1.3.6.1.4.1.311.1.2.1.28
This variable gives the path to the log file
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

parBackupDirPath 1.3.6.1.4.1.311.1.2.1.29
This variable gives the path to the backup dir
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

parDoBackupOnTerm 1.3.6.1.4.1.311.1.2.1.30
This variable specifies whether WINS should do backup on termination. Setting it 1 holds no meaning unless parBackupDirPath is set also
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

parMigrateOn 1.3.6.1.4.1.311.1.2.1.31
This variable specifies whether static records in the wins database should be treated as dynamic records during conflicts with new dynamic registrations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

dfDatafilesTable 1.3.6.1.4.1.311.1.2.4.1
A list of datafiles specified under the Datafiles key in the registry. These files are used for statically initialization of the WINS database
Status: mandatory Access: read-write
OBJECT-TYPE    
  SEQUENCE OF  
    DFDatafileEntry

dfDatafileEntry 1.3.6.1.4.1.311.1.2.4.1.1
data file name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DFDatafileEntry  

dfDatafileIndex 1.3.6.1.4.1.311.1.2.4.1.1.1
Used for indexing entries in the datafiles table. It has no other use
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

dfDatafileName 1.3.6.1.4.1.311.1.2.4.1.1.2
Name of the datafile to use for static initialization
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pullInitTime 1.3.6.1.4.1.311.1.2.2.1
This variable indicates whether pull should be done at WINS invocation and at reconfiguration. If any pull group's mib variable is set, that constitutes reconfiguration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pullCommRetryCount 1.3.6.1.4.1.311.1.2.2.2
This variable gives the retry count in case of comm failure when doing pull replication. This is the max. number of retries that will be done at the interval specified for the Partner before WINS will stop for a certain number (canned) of replication time intervals before starting again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pullPnrTable 1.3.6.1.4.1.311.1.2.2.3
A list of Partners with which pull replication needs to be done
Status: mandatory Access: read-write
OBJECT-TYPE    
  SEQUENCE OF  
    PullPnrEntry

pPullPnrEntry 1.3.6.1.4.1.311.1.2.2.3.1
This is the row corresponding to a partner
Status: mandatory Access: read-write
OBJECT-TYPE    
  PullPnrEntry  

pullPnrAdd 1.3.6.1.4.1.311.1.2.2.3.1.1
This is the address of the remote WINS partner
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

pullPnrSpTime 1.3.6.1.4.1.311.1.2.2.3.1.2
This variable gives the specific time at which pull replication should occur
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

pullPnrTimeInterval 1.3.6.1.4.1.311.1.2.2.3.1.3
This variable gives the time interval for pull replication
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pullPnrMemberPrec 1.3.6.1.4.1.311.1.2.2.3.1.4
This is the precedence to be given to members of the special group pulled from the WINS. Note: the precedence of locally registered members of a special group is more than any replicas pulled in
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER low(0), high(1)  

pullPnrNoOfSuccRpls 1.3.6.1.4.1.311.1.2.2.3.1.5
The number of times replication was successful with the WINS after invocation or reset of counters
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pullPnrNoOfCommFails 1.3.6.1.4.1.311.1.2.2.3.1.6
The number of times replication was unsuccessful with the WINS due to comm. failure (after invocation or reset of counters
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pullPnrVersNoLowWord 1.3.6.1.4.1.311.1.2.2.3.1.7
The low word of the highest vers. no found in records owned by this WINS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pullPnrVersNoHighWord 1.3.6.1.4.1.311.1.2.2.3.1.8
The high word of the highest vers. no found in records owned by this WINS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pushInitTime 1.3.6.1.4.1.311.1.2.3.1
This variable indicates whether a push (i.e. notification message) should be done at invocation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pushRplOnAddChg 1.3.6.1.4.1.311.1.2.3.2
This variable indicates whether a notification message should be sent when address changes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pushPnrTable 1.3.6.1.4.1.311.1.2.3.3
A list of WINS Partners with which push replication is to be initiated
Status: mandatory Access: read-write
OBJECT-TYPE    
  SEQUENCE OF  
    PushPnrEntry

pushPnrEntry 1.3.6.1.4.1.311.1.2.3.3.1
This is the row corresponding to the WINS pnr
Status: mandatory Access: read-write
OBJECT-TYPE    
  PushPnrEntry  

pushPnrAdd 1.3.6.1.4.1.311.1.2.3.3.1.1
Address of the WINS partner
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

pushPnrUpdateCount 1.3.6.1.4.1.311.1.2.3.3.1.2
This variable indicates the # of updates that should result in a push message
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cmdPullTrigger 1.3.6.1.4.1.311.1.2.5.1
This variable when set will cause the WINS to pull from the remote WINS identified by the IpAddress
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cmdPushTrigger 1.3.6.1.4.1.311.1.2.5.2
This variable when set will cause the WINS to push a notification message to the remote WINS identified by the IpAddress
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cmdDeleteWins 1.3.6.1.4.1.311.1.2.5.3
This variable when set will cause all information pertaining to a WINS (data records, context information to be deleted from the local WINS. Use this only when owner-address mapping table is getting to near capacity. NOTE: deletion of all information pertaining to the managed WINS is not permitted
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cmdDoScavenging 1.3.6.1.4.1.311.1.2.5.4
This variable when set will cause WINS to do scavenging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

cmdDoStaticInit 1.3.6.1.4.1.311.1.2.5.5
When set WINS will do static initialization using the file specified as the value. If 0 is specified, WINS will do static initialization using the files specified in the registry (can be read-written using Datafile table
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

cmdNoOfWrkThds 1.3.6.1.4.1.311.1.2.5.6
Sets the number of worker threads in WINS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

cmdPriorityClass 1.3.6.1.4.1.311.1.2.5.7
Set the priority class of WINS to normal or high
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

cmdResetCounters 1.3.6.1.4.1.311.1.2.5.8
Reset the counters. Value is ignored
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cmdDeleteDbRecs 1.3.6.1.4.1.311.1.2.5.9
This variable when set will cause all date records pertaining to a WINS to be deleted from the local WINS. Note: Only data records are deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cmdDRPopulateTable 1.3.6.1.4.1.311.1.2.5.10
This variable can set to retrieve records of a WINS whose Ip address is provided. When set the table is populated right-away
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

cmdDRDataRecordsTable 1.3.6.1.4.1.311.1.2.5.11
This is the table that stores the data records The records are sorted lexicographically by name Note: the table is cached (to save on overhead on WINS) To repopulate the table, set cmdDRDataRecordsTable mib var
Status: mandatory Access: read-only
OBJECT-TYPE    
  SEQUENCE OF  
    CmdDRRecordEntry

cmdDRRecordEntry 1.3.6.1.4.1.311.1.2.5.11.1
data record owned by WINS whose address was specified when CmdDRRecordsTable was set
Status: mandatory Access: read-write
OBJECT-TYPE    
  CmdDRRecordEntry  

cmdDRRecordName 1.3.6.1.4.1.311.1.2.5.11.1.1
Name in the record
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

cmdDRRecordAddress 1.3.6.1.4.1.311.1.2.5.11.1.2
Address(es) of the record. If the record is a multihomed record or a special group, the addresses are returned sequentially in pairs. Each pair is comprised of the address of the owner wins followed by the address of the machine (multihomed)/member (special group). Note: Following snmp's convention, the records are always returned in network byte order
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cmdDRRecordType 1.3.6.1.4.1.311.1.2.5.11.1.3
Type of the record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unique(0), normalgroup(1), specialgroup(2), multihomed(3)  

cmdDRRecordPersistenceType 1.3.6.1.4.1.311.1.2.5.11.1.4
Persistence type of the record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

cmdDRRecordState 1.3.6.1.4.1.311.1.2.5.11.1.5
State of the record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(0), released(1), tombstone(2), deleted(3)  

cmdWinsVersNoLowWord 1.3.6.1.4.1.311.1.2.5.12
The low word of the version number counter of the WINS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cmdWinsVersNoHighWord 1.3.6.1.4.1.311.1.2.5.13
The high word of the version number counter of the WINS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER