WAYSTREAM-MIB

File: WAYSTREAM-MIB.mib (55714 bytes)

Imported modules

SNMPv2-SMI

SNMPv2-TC

WAYSTREAM-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-IDENTITY	OBJECT-TYPE
NOTIFICATION-TYPE	Integer32	Unsigned32
Counter64	Gauge32	TimeTicks
DisplayString	wsMgmt	wsExperiment

Defined Types

WsTempEntry
SEQUENCE
	wsTempSensor	Unsigned32
	wsTempMeasured	Integer32
	wsTempTOS	Integer32
	wsTempTHYST	Integer32
	wsTempThresholdLow	Integer32
	wsTempThresholdHigh	Integer32
	wsTempStatus	INTEGER

WsVoltEntry
SEQUENCE
	wsVoltChannel	Unsigned32
	wsVoltNominal	Integer32
	wsVoltMeasured	Integer32
	wsVoltThresholdLow	Integer32
	wsVoltThresholdHigh	Integer32
	wsVoltStatus	INTEGER

WsFanEntry
SEQUENCE
	wsFanNumber	Unsigned32
	wsFanRPM	Integer32

WsNeighboursEntry
SEQUENCE
	wsNeighbourIfIndex	Unsigned32
	wsNeighbourNIndex	Unsigned32
	wsNeighbourHostname	DisplayString
	wsNeighbourLocalIf	DisplayString
	wsNeighbourRemoteIf	DisplayString
	wsNeighbourModel	DisplayString
	wsNeighbourLastAct	Integer32
	wsNeighbourOSVersion	DisplayString
	wsNeighbourSNPA	OCTET STRING
	wsNeighbourUptime	Unsigned32
	wsNeighbourState	INTEGER
	wsNeighbourDBCount	Unsigned32
	wsNeighbourCreated	TimeTicks
	wsNeighbourPacketsIn	Unsigned32
	wsNeighbourPacketErrorsrIn	Unsigned32

WsNeighbourPortsEntry
SEQUENCE
	wsNeighbourPortIfIndex	Unsigned32
	wsNeighbourPortNIndex	Unsigned32
	wsNeighbourPortPIndex	Unsigned32
	wsNeighbourPortName	DisplayString
	wsNeighbourPortState	BITS
	wsNeighbourPortTxOctets	Counter64
	wsNeighbourPortTxDropPkts	Unsigned32
	wsNeighbourPortTxBroadcastPkts	Unsigned32
	wsNeighbourPortTxMulticastPkts	Unsigned32
	wsNeighbourPortTxUnicastPkts	Unsigned32
	wsNeighbourPortTxCollisions	Unsigned32
	wsNeighbourPortTxDeferredTransmit	Unsigned32
	wsNeighbourPortTxFrameInDisc	Unsigned32
	wsNeighbourPortRxOctets	Counter64
	wsNeighbourPortRxUndersizePkts	Unsigned32
	wsNeighbourPortPkts64Octets	Unsigned32
	wsNeighbourPortPkts65to127Octets	Unsigned32
	wsNeighbourPortPkts128to255Octets	Unsigned32
	wsNeighbourPortPkts256to511Octets	Unsigned32
	wsNeighbourPortPkts512to1023Octets	Unsigned32
	wsNeighbourPortPkts1024to1522Octets	Unsigned32
	wsNeighbourPortRxOversizePkts	Unsigned32
	wsNeighbourPortRxJabbers	Unsigned32
	wsNeighbourPortRxAlignmentErrors	Unsigned32
	wsNeighbourPortRxFCSErrors	Unsigned32
	wsNeighbourPortRxGoodOctets	Counter64
	wsNeighbourPortRxDropPkts	Unsigned32
	wsNeighbourPortRxUnicastPkts	Unsigned32
	wsNeighbourPortRxMulticastPkts	Unsigned32
	wsNeighbourPortRxBroadcastPkts	Unsigned32
	wsNeighbourPortRxFragments	Unsigned32
	wsNeighbourPortRxExcessSizeDisc	Unsigned32
	wsNeighbourPortRxSymbolError	Unsigned32

WsNeighbourPortSNPAEntry
SEQUENCE
	wsNeighbourPortSNPAIfIndex	Unsigned32
	wsNeighbourPortSNPANIndex	Unsigned32
	wsNeighbourPortSNPAPIndex	Unsigned32
	wsNeighbourPortSNPASIndex	Unsigned32
	wsNeighbourPortSNPASMCast	Integer32
	wsNeighbourPortSNPA	OCTET STRING

WsSFPEntry
SEQUENCE
	wsSFPIndex	Unsigned32
	wsSFPStatus	INTEGER
	wsSFPConnector	INTEGER
	wsSFPTransceiver	BITS
	wsSFPEncoding	INTEGER
	wsSFPBitrate	Unsigned32
	wsSFPSingleModeLen	Unsigned32
	wsSFPMultiMode50Len	Unsigned32
	wsSFPMultiMode625Len	Unsigned32
	wsSFPCopperLen	Unsigned32
	wsSFPTempStatus	INTEGER
	wsSFPTemp	Integer32
	wsSFPVoltStatus	INTEGER
	wsSFPVolt	Integer32
	wsSFPTXCurrentStatus	INTEGER
	wsSFPTXCurrent	Integer32
	wsSFPTXPowerStatus	INTEGER
	wsSFPTXPower	Integer32
	wsSFPRXPowerStatus	INTEGER
	wsSFPRXPower	Integer32
	wsSFPTransceiverExt	BITS
	wsSFPTXdBmPower	Integer32
	wsSFPRXdBmPower	Integer32
	wsSFPTempNormalLow	Integer32
	wsSFPTempNormalHigh	Integer32
	wsSFPTempWarningLow	Integer32
	wsSFPTempWarningHigh	Integer32
	wsSFPVoltNormalLow	Integer32
	wsSFPVoltNormalHigh	Integer32
	wsSFPVoltWarningLow	Integer32
	wsSFPVoltWarningHigh	Integer32
	wsSFPTXCurrentNormalLow	Integer32
	wsSFPTXCurrentNormalHigh	Integer32
	wsSFPTXCurrentWarningLow	Integer32
	wsSFPTXCurrentWarningHigh	Integer32
	wsSFPTXOutputPowNormalLowuW	Integer32
	wsSFPTXOutputPowNormalHighuW	Integer32
	wsSFPTXOutputPowWarningLowuW	Integer32
	wsSFPTXOutputPowWarningHighuW	Integer32
	wsSFPTXOutputPowNormalLowdBm	Integer32
	wsSFPTXOutputPowNormalHighdBm	Integer32
	wsSFPTXOutputPowWarningLowdBm	Integer32
	wsSFPTXOutputPowWarningHighdBm	Integer32
	wsSFPRXInputPowNormalLowuW	Integer32
	wsSFPRXInputPowNormalHighuW	Integer32
	wsSFPRXInputPowWarningLowuW	Integer32
	wsSFPRXInputPowWarningHighuW	Integer32
	wsSFPRXInputPowNormalLowdBm	Integer32
	wsSFPRXInputPowNormalHighdBm	Integer32
	wsSFPRXInputPowWarningLowdBm	Integer32
	wsSFPRXInputPowWarningHighdBm	Integer32
	wsSFPPartNumber	DisplayString
	wsSFPSerialNumber	DisplayString

WsPolicyEntry
SEQUENCE
	wsPolicyIfIndex	Unsigned32
	wsPolicyIfName	DisplayString
	wsPolicyName	DisplayString
	wsPolicyCookie	DisplayString
	wsPolicyInPkts	Counter64
	wsPolicyInBytes	Counter64
	wsPolicyInDrops	Counter64
	wsPolicyOutPkts	Counter64
	wsPolicyOutBytes	Counter64
	wsPolicyOutDrops	Counter64
	wsPolicyUsedCnt	Gauge32

WsXFPEntry
SEQUENCE
	wsXFPIndex	Unsigned32
	wsXFPStatus	INTEGER
	wsXFPConnector	INTEGER
	wsXFPTransceiver	BITS
	wsXFPEncoding	BITS
	wsXFPBitrateMin	Unsigned32
	wsXFPBitrateMax	Unsigned32
	wsXFPSingleModeLen	Unsigned32
	wsXFPMultiMode50Len	Unsigned32
	wsXFPMultiMode625Len	Unsigned32
	wsXFPCopperLen	Unsigned32
	wsXFPTempStatus	INTEGER
	wsXFPTemp	Integer32
	wsXFPTXCurrentStatus	INTEGER
	wsXFPTXCurrent	Integer32
	wsXFPTXPowerStatus	INTEGER
	wsXFPTXPower	Integer32
	wsXFPRXPowerStatus	INTEGER
	wsXFPRXPower	Integer32

Defined Values

ibos		1.3.6.1.4.1.9303.4.1
The Waystream MIB describing iBOS functionality of ASRs
MODULE-IDENTITY

wsSystem		1.3.6.1.4.1.9303.4.1.1
System management objects
Status: current	Access: read-only
OBJECT-IDENTITY

wsWritedummy		1.3.6.1.4.1.9303.4.1.1.1
This object is a read-write object that accept an integer. The value written has no effect on the system, but a successful write indicate that SNMP write operations are possible on the target router. The last written value can be read back
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2147483647

wsReload		1.3.6.1.4.1.9303.4.1.1.2
This object is used to restart the target router by setting the number of seconds until system reload. A value of 0 cancels any pending reload. The value returned when reading the object is the number of seconds remaining until reload
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2147483647

wsVersion		1.3.6.1.4.1.9303.4.1.1.3
The iBOS version indicator
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..2147483647

wsAsrRevision		1.3.6.1.4.1.9303.4.1.1.4
The ASR hardware revision
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..2147483647

wsVersionString		1.3.6.1.4.1.9303.4.1.1.5
A textual representation of the iBOS version. For iBOS versions after 3.2, this field should be used to identify the iBOS version instead of the old wsVersion OID
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsEnvironment		1.3.6.1.4.1.9303.4.1.2
Environtment data
Status: current	Access: read-only
OBJECT-IDENTITY

wsTempTable		1.3.6.1.4.1.9303.4.1.2.1
Table of values from temperature sensors.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsTempEntry

wsTempEntry		1.3.6.1.4.1.9303.4.1.2.1.1
An entry for a temperature sensor.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsTempEntry

wsTempSensor		1.3.6.1.4.1.9303.4.1.2.1.1.1
Sensor number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsTempMeasured		1.3.6.1.4.1.9303.4.1.2.1.1.2
Measured temperature in 100ths of degrees centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsTempTOS		1.3.6.1.4.1.9303.4.1.2.1.1.3
TOS in 100ths of degrees centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsTempTHYST		1.3.6.1.4.1.9303.4.1.2.1.1.4
THYST in 100ths of degrees centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsTempThresholdLow		1.3.6.1.4.1.9303.4.1.2.1.1.5
Threshold (low) in 100ths of degrees centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsTempThresholdHigh		1.3.6.1.4.1.9303.4.1.2.1.1.6
Threshold (high) in 100ths of degrees centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsTempStatus		1.3.6.1.4.1.9303.4.1.2.1.1.7
Status (measurement compared to threshold).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	failed(-1), ok(0), high(1), low(2), disabled(4)

wsVoltTable		1.3.6.1.4.1.9303.4.1.2.2
Table of measured board voltages.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsVoltEntry

wsVoltEntry		1.3.6.1.4.1.9303.4.1.2.2.1
An entry for a board voltage.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsVoltEntry

wsVoltChannel		1.3.6.1.4.1.9303.4.1.2.2.1.1
Voltage channel number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsVoltNominal		1.3.6.1.4.1.9303.4.1.2.2.1.2
Nominal voltage in mV for channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsVoltMeasured		1.3.6.1.4.1.9303.4.1.2.2.1.3
Measured voltage in mV for channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsVoltThresholdLow		1.3.6.1.4.1.9303.4.1.2.2.1.4
Threshold (low) voltage in mV for channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsVoltThresholdHigh		1.3.6.1.4.1.9303.4.1.2.2.1.5
Threshold (high) voltage in mV for channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsVoltStatus		1.3.6.1.4.1.9303.4.1.2.2.1.6
Status (measurement compared to threshold).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(-3), failed(-1), ok(0), high(1), low(2), notPresent(3), disabled(4)

wsFanTable		1.3.6.1.4.1.9303.4.1.2.3
Table of measured rotation speeds for external fans.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsFanEntry

wsFanEntry		1.3.6.1.4.1.9303.4.1.2.3.1
An entry for a fan.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsFanEntry

wsFanNumber		1.3.6.1.4.1.9303.4.1.2.3.1.1
Fan number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsFanRPM		1.3.6.1.4.1.9303.4.1.2.3.1.2
Fan speed in revolutions per minute.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsFanVoltage		1.3.6.1.4.1.9303.4.1.2.4
Fan driving voltage (in mV).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsIbosEnvironmentTrapEnable		1.3.6.1.4.1.9303.4.1.2.5
Provides control over iBOS environment related traps.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

wsPFDP		1.3.6.1.4.1.9303.4.1.3
PFDP data
Status: current	Access: read-write
OBJECT-IDENTITY

wsNeighboursTable		1.3.6.1.4.1.9303.4.1.3.1
Table of discovered PFDB Neighbours.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsNeighboursEntry

wsNeighboursEntry		1.3.6.1.4.1.9303.4.1.3.1.1
An entry for a neighbour.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsNeighboursEntry

wsNeighbourIfIndex		1.3.6.1.4.1.9303.4.1.3.1.1.1
Neighbour interface index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourNIndex		1.3.6.1.4.1.9303.4.1.3.1.1.2
Neighbour index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourHostname		1.3.6.1.4.1.9303.4.1.3.1.1.3
Neighbour hostname.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsNeighbourLocalIf		1.3.6.1.4.1.9303.4.1.3.1.1.4
Local interface that neighbour is on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsNeighbourRemoteIf		1.3.6.1.4.1.9303.4.1.3.1.1.5
Remote interface of neighbour.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsNeighbourModel		1.3.6.1.4.1.9303.4.1.3.1.1.6
Neighbour model.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsNeighbourLastAct		1.3.6.1.4.1.9303.4.1.3.1.1.7
Time in seconds since last neighbour advertisment.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsNeighbourOSVersion		1.3.6.1.4.1.9303.4.1.3.1.1.8
Neighbour OS version.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsNeighbourSNPA		1.3.6.1.4.1.9303.4.1.3.1.1.9
SNPA of neighbour interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wsNeighbourUptime		1.3.6.1.4.1.9303.4.1.3.1.1.10
Uptime in seconds for neighbour.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourState		1.3.6.1.4.1.9303.4.1.3.1.1.11
State of neighbour.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	bidirectional(1), unidirectional(2)

wsNeighbourDBCount		1.3.6.1.4.1.9303.4.1.3.1.1.12
Database entries for neighbour.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourCreated		1.3.6.1.4.1.9303.4.1.3.1.1.13
The value of sysUpTime at the time the neighbour first appeared on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

wsNeighbourPacketsIn		1.3.6.1.4.1.9303.4.1.3.1.1.14
Number of PFDP packets received from neighbour.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPacketErrorsrIn		1.3.6.1.4.1.9303.4.1.3.1.1.15
Number of erroneous PFDP packets received from neighbour.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortsTable		1.3.6.1.4.1.9303.4.1.3.2
Table of ports of discovered PFDB Neighbours.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsNeighbourPortsEntry

wsNeighbourPortsEntry		1.3.6.1.4.1.9303.4.1.3.2.1
An entry for a port of a neighbour.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsNeighbourPortsEntry

wsNeighbourPortIfIndex		1.3.6.1.4.1.9303.4.1.3.2.1.1
Neighbour interface index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortNIndex		1.3.6.1.4.1.9303.4.1.3.2.1.2
Neighbour index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortPIndex		1.3.6.1.4.1.9303.4.1.3.2.1.3
Neighbour port index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortName		1.3.6.1.4.1.9303.4.1.3.2.1.4
Name of neighbour port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsNeighbourPortState		1.3.6.1.4.1.9303.4.1.3.2.1.5
State of neighbour port.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	reserved0(0), reserved1(1), reserved2(2), reserved3(3), vlaninfo(4), s100mbit(5), fullduplex(6), up(7)

wsNeighbourPortTxOctets		1.3.6.1.4.1.9303.4.1.3.2.1.6
The total number of good bytes of data transmitted by a port (excluding preamble but including FCS).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsNeighbourPortTxDropPkts		1.3.6.1.4.1.9303.4.1.3.2.1.7
This counter is incremented every time a transmit packet is dropped due to lack of resources (e.g., transmit FIFO underflow), or an internal MAC sublayer transmit error not counted by.in either the TxLateCollision or the TxExcessiveCollision counters.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortTxBroadcastPkts		1.3.6.1.4.1.9303.4.1.3.2.1.8
The number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid multicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortTxMulticastPkts		1.3.6.1.4.1.9303.4.1.3.2.1.9
The number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortTxUnicastPkts		1.3.6.1.4.1.9303.4.1.3.2.1.10
The number of good packets transmitted by a port that are addressed to a unicast address.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortTxCollisions		1.3.6.1.4.1.9303.4.1.3.2.1.11
The number of collisions experienced by a port during packet transmissions.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortTxDeferredTransmit		1.3.6.1.4.1.9303.4.1.3.2.1.12
The number of packets transmitted by a port for which the first transmission attempt is delayed because the medium is busy.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortTxFrameInDisc		1.3.6.1.4.1.9303.4.1.3.2.1.13
The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxOctets		1.3.6.1.4.1.9303.4.1.3.2.1.14
The number of bytes of data received by a port (excluding preamble but including FCS), including bad packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsNeighbourPortRxUndersizePkts		1.3.6.1.4.1.9303.4.1.3.2.1.15
The number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortPkts64Octets		1.3.6.1.4.1.9303.4.1.3.2.1.16
The number of packets (including error packets) that are 64 bytes long.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortPkts65to127Octets		1.3.6.1.4.1.9303.4.1.3.2.1.17
The number of packets (including error packets) that are between 65 and 127 bytes long.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortPkts128to255Octets		1.3.6.1.4.1.9303.4.1.3.2.1.18
The number of packets (including error packets) that are between 128 and 255 bytes long.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortPkts256to511Octets		1.3.6.1.4.1.9303.4.1.3.2.1.19
The number of packets (including error packets) that are between 256 and 511 bytes long.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortPkts512to1023Octets		1.3.6.1.4.1.9303.4.1.3.2.1.20
The number of packets (including error packets) that are between 512 and 1023 bytes long.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortPkts1024to1522Octets		1.3.6.1.4.1.9303.4.1.3.2.1.21
The number of packets (including error packets) that are between 1024 and 1522 bytes long.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxOversizePkts		1.3.6.1.4.1.9303.4.1.3.2.1.22
The number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter alone will be incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxExcessSizeDisc counter will be incremented for packets of 1537 bytes and higher.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxJabbers		1.3.6.1.4.1.9303.4.1.3.2.1.23
The number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxAlignmentErrors		1.3.6.1.4.1.9303.4.1.3.2.1.24
The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS with a nonintegral number of bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxFCSErrors		1.3.6.1.4.1.9303.4.1.3.2.1.25
The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes inclusive, and have a bad FCS with an integral number of bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxGoodOctets		1.3.6.1.4.1.9303.4.1.3.2.1.26
The total number of bytes in all good packets received by a port (excluding framing bits but including FCS).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsNeighbourPortRxDropPkts		1.3.6.1.4.1.9303.4.1.3.2.1.27
The number of good packets received by a port that were dropped due to lack of resources (e.g., lack of input buffers) or were dropped due to lack of resources before a determination of the validity of the packet was able to be made (e.g., receive FIFO overflow). The counter is only incremented if the receive error was not counted by.either the RxExcessSizeDisc, the RxAlignmentErrors or the RxFCSErrors counters.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxUnicastPkts		1.3.6.1.4.1.9303.4.1.3.2.1.28
The number of good packets received by a port that are addressed to a unicast address.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxMulticastPkts		1.3.6.1.4.1.9303.4.1.3.2.1.29
The number of good packets received by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxBroadcastPkts		1.3.6.1.4.1.9303.4.1.3.2.1.30
The number of good packets received by a port that are directed to the broadcast address. This counter does not include errored broadcast packets or valid multicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxFragments		1.3.6.1.4.1.9303.4.1.3.2.1.31
The number of packets received by a port that are less than 64 bytes (excluding framing bits) and have either an FCS error or an alignment error.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxExcessSizeDisc		1.3.6.1.4.1.9303.4.1.3.2.1.32
The number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including the FCS) and were discarded due to excessive length. Note that the RxOversizePkts counter alone is incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxOversizePkts counter are incremented for packets of 1537 bytes and higher.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortRxSymbolError		1.3.6.1.4.1.9303.4.1.3.2.1.33
The total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carrier event and does not increment on detection of collision during the carrier event.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortSNPATable		1.3.6.1.4.1.9303.4.1.3.3
Table of known SNPA on ports of discovered PFDB Neighbours.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsNeighbourPortSNPAEntry

wsNeighbourPortSNPAEntry		1.3.6.1.4.1.9303.4.1.3.3.1
An entry for a known SNPA on a port of a neighbour.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsNeighbourPortSNPAEntry

wsNeighbourPortSNPAIfIndex		1.3.6.1.4.1.9303.4.1.3.3.1.1
Neighbour interface index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortSNPANIndex		1.3.6.1.4.1.9303.4.1.3.3.1.2
Neighbour index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortSNPAPIndex		1.3.6.1.4.1.9303.4.1.3.3.1.3
Neighbour port index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortSNPASIndex		1.3.6.1.4.1.9303.4.1.3.3.1.4
Neighbour port SNPA index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsNeighbourPortSNPASMCast		1.3.6.1.4.1.9303.4.1.3.3.1.5
Set to 1 if SNPA is a multicast address, 0 otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsNeighbourPortSNPA		1.3.6.1.4.1.9303.4.1.3.3.1.6
Known SNPA on neighbour port.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wsSFPTable		1.3.6.1.4.1.9303.4.1.4
Table with information on SFPs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsSFPEntry

wsSFPEntry		1.3.6.1.4.1.9303.4.1.4.1
An entry for an SFP.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsSFPEntry

wsSFPIndex		1.3.6.1.4.1.9303.4.1.4.1.1
SFP number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsSFPStatus		1.3.6.1.4.1.9303.4.1.4.1.2
SFP status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ok(0), missing(1), invalid(2)

wsSFPConnector		1.3.6.1.4.1.9303.4.1.4.1.3
Connector type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sc(1), fiberJack(6), lc(7), mtrj(8), mu(9), sg(10), opticalPigtail(11), hssdcii(32), copperPigtail(33)

wsSFPTransceiver		1.3.6.1.4.1.9303.4.1.4.1.4
Transceiver capablities.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	sBasePX(0), sBaseBX10(1), s100BaseFX(2), s100BaseLX(3), s1000BaseT(4), s1000BaseCX(5), s1000BaseLX(6), s1000BaseSX(7)

wsSFPEncoding		1.3.6.1.4.1.9303.4.1.4.1.5
Encoding type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	e8B10B(1), e4B5B(2), eNRZ(3), eManchester(4)

wsSFPBitrate		1.3.6.1.4.1.9303.4.1.4.1.6
SFP Bitrate (Mbps).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsSFPSingleModeLen		1.3.6.1.4.1.9303.4.1.4.1.7
Supported single mode fiber link length (m). A value of 255000 means > 254000 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsSFPMultiMode50Len		1.3.6.1.4.1.9303.4.1.4.1.8
Supported 50um multi-mode fiber link length (m). A value of 2550 means > 2540 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsSFPMultiMode625Len		1.3.6.1.4.1.9303.4.1.4.1.9
Supported 62.5um multi-mode fiber link length (m). A value of 2550 means > 2540 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsSFPCopperLen		1.3.6.1.4.1.9303.4.1.4.1.10
Supported copper link length (m). A value of 255 means > 254 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsSFPTempStatus		1.3.6.1.4.1.9303.4.1.4.1.11
Temperature status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsSFPTemp		1.3.6.1.4.1.9303.4.1.4.1.12
Measured temperature in degrees centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPVoltStatus		1.3.6.1.4.1.9303.4.1.4.1.13
Voltage status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsSFPVolt		1.3.6.1.4.1.9303.4.1.4.1.14
Measured voltage (mV).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXCurrentStatus		1.3.6.1.4.1.9303.4.1.4.1.15
TX Current status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsSFPTXCurrent		1.3.6.1.4.1.9303.4.1.4.1.16
Measured TX current (mA).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXPowerStatus		1.3.6.1.4.1.9303.4.1.4.1.17
TX power status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsSFPTXPower		1.3.6.1.4.1.9303.4.1.4.1.18
Measured TX power (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXPowerStatus		1.3.6.1.4.1.9303.4.1.4.1.19
RX power status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsSFPRXPower		1.3.6.1.4.1.9303.4.1.4.1.20
Measured RX power (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTransceiverExt		1.3.6.1.4.1.9303.4.1.4.1.21
10G Ethernet Compliance Codes.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	s10000BaseER(0), s10000BaseLRM(1), s10000BaseLR(2), s10000BaseSR(3), sActiveCable(4), sPassiveCable(5), reserved6(6), reserved7(7)

wsSFPTXdBmPower		1.3.6.1.4.1.9303.4.1.4.1.22
Measured TX power (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXdBmPower		1.3.6.1.4.1.9303.4.1.4.1.23
Measured RX power (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTempNormalLow		1.3.6.1.4.1.9303.4.1.4.1.24
Operating temparature normal range low (C).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTempNormalHigh		1.3.6.1.4.1.9303.4.1.4.1.25
Operating temparature normal range high (C).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTempWarningLow		1.3.6.1.4.1.9303.4.1.4.1.26
Operating temparature warning range low (C).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTempWarningHigh		1.3.6.1.4.1.9303.4.1.4.1.27
Operating temparature warning range high (C).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPVoltNormalLow		1.3.6.1.4.1.9303.4.1.4.1.28
Supply voltage normal range low (mV).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPVoltNormalHigh		1.3.6.1.4.1.9303.4.1.4.1.29
Supply voltage normal range high (mV).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPVoltWarningLow		1.3.6.1.4.1.9303.4.1.4.1.30
Supply voltage warning range low (mV).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPVoltWarningHigh		1.3.6.1.4.1.9303.4.1.4.1.31
Supply voltage warning range high (mV).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXCurrentNormalLow		1.3.6.1.4.1.9303.4.1.4.1.32
TX Current normal range low (mA).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXCurrentNormalHigh		1.3.6.1.4.1.9303.4.1.4.1.33
TX Current normal range high (mA).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXCurrentWarningLow		1.3.6.1.4.1.9303.4.1.4.1.34
TX Current warning range low (mA).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXCurrentWarningHigh		1.3.6.1.4.1.9303.4.1.4.1.35
TX Current warning range high (mA).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowNormalLowuW		1.3.6.1.4.1.9303.4.1.4.1.36
TX output power normal range low (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowNormalHighuW		1.3.6.1.4.1.9303.4.1.4.1.37
TX output power normal range high (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowWarningLowuW		1.3.6.1.4.1.9303.4.1.4.1.38
TX output power warning range low (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowWarningHighuW		1.3.6.1.4.1.9303.4.1.4.1.39
TX output power warning range high (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowNormalLowdBm		1.3.6.1.4.1.9303.4.1.4.1.40
TX output power normal range low (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowNormalHighdBm		1.3.6.1.4.1.9303.4.1.4.1.41
TX output power normal range high (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowWarningLowdBm		1.3.6.1.4.1.9303.4.1.4.1.42
TX output power warning range low (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPTXOutputPowWarningHighdBm		1.3.6.1.4.1.9303.4.1.4.1.43
TX output power warning range high (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowNormalLowuW		1.3.6.1.4.1.9303.4.1.4.1.44
RX input power normal range low (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowNormalHighuW		1.3.6.1.4.1.9303.4.1.4.1.45
RX input power normal range high (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowWarningLowuW		1.3.6.1.4.1.9303.4.1.4.1.46
RX input power warning range low (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowWarningHighuW		1.3.6.1.4.1.9303.4.1.4.1.47
RX input power warning range high (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowNormalLowdBm		1.3.6.1.4.1.9303.4.1.4.1.48
RX input power normal range low (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowNormalHighdBm		1.3.6.1.4.1.9303.4.1.4.1.49
RX input power normal range high (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowWarningLowdBm		1.3.6.1.4.1.9303.4.1.4.1.50
RX input power warning range low (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPRXInputPowWarningHighdBm		1.3.6.1.4.1.9303.4.1.4.1.51
RX input power warning range high (dBm x 1000).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSFPPartNumber		1.3.6.1.4.1.9303.4.1.4.1.52
SFP part number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wsSFPSerialNumber		1.3.6.1.4.1.9303.4.1.4.1.53
SFP serial number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wsAccounting		1.3.6.1.4.1.9303.4.1.5
Accounting objects
Status: current	Access: read-only
OBJECT-IDENTITY

wsPolicyTable		1.3.6.1.4.1.9303.4.1.5.1
Table of policy accounting information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsPolicyEntry

wsPolicyEntry		1.3.6.1.4.1.9303.4.1.5.1.1
An entry for a policy.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsPolicyEntry

wsPolicyIfIndex		1.3.6.1.4.1.9303.4.1.5.1.1.1
Interface index of policy accounting entry.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsPolicyIfName		1.3.6.1.4.1.9303.4.1.5.1.1.2
Interface name of policy accountin entry
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsPolicyName		1.3.6.1.4.1.9303.4.1.5.1.1.3
Name of policy.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsPolicyCookie		1.3.6.1.4.1.9303.4.1.5.1.1.4
Name of policy cookie.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsPolicyInPkts		1.3.6.1.4.1.9303.4.1.5.1.1.5
Input packets counter.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsPolicyInBytes		1.3.6.1.4.1.9303.4.1.5.1.1.6
Input bytes counter.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsPolicyInDrops		1.3.6.1.4.1.9303.4.1.5.1.1.7
Number input packets dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsPolicyOutPkts		1.3.6.1.4.1.9303.4.1.5.1.1.8
Output packets counter.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsPolicyOutBytes		1.3.6.1.4.1.9303.4.1.5.1.1.9
Output bytes counter.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsPolicyOutDrops		1.3.6.1.4.1.9303.4.1.5.1.1.10
Number input packets dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wsPolicyUsedCnt		1.3.6.1.4.1.9303.4.1.5.1.1.11
Number policy maps set to use this policy.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

wsXFPTable		1.3.6.1.4.1.9303.4.1.6
Table with information on XFPs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WsXFPEntry

wsXFPEntry		1.3.6.1.4.1.9303.4.1.6.1
An entry for an XFP.
Status: current	Access: not-accessible
OBJECT-TYPE
	WsXFPEntry

wsXFPIndex		1.3.6.1.4.1.9303.4.1.6.1.1
XFP number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsXFPStatus		1.3.6.1.4.1.9303.4.1.6.1.2
XFP status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ok(0), missing(1), invalid(2)

wsXFPConnector		1.3.6.1.4.1.9303.4.1.6.1.3
Connector type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sc(1), fiberJack(6), lc(7), mtrj(8), mu(9), sg(10), opticalPigtail(11), hssdcii(32), copperPigtail(33)

wsXFPTransceiver		1.3.6.1.4.1.9303.4.1.6.1.4
Transceiver capablities.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	reserved0(0), s10GBaseEW(1), s10GBaseLW(2), s10GBaseSW(3), s10GBaseLRM(4), s10GBaseER(5), s10GBaseLR(6), s10GBaseSR(7)

wsXFPEncoding		1.3.6.1.4.1.9303.4.1.6.1.5
Encoding type.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	reserved0(0), reserved1(1), reserved2(2), eRZ(3), eNRZ(4), eSonetScrambl(5), e8B10B(6), e64B66B(7)

wsXFPBitrateMin		1.3.6.1.4.1.9303.4.1.6.1.6
XFP Min Bitrate (Mbps).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsXFPBitrateMax		1.3.6.1.4.1.9303.4.1.6.1.7
XFP Max Bitrate (Mbps).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsXFPSingleModeLen		1.3.6.1.4.1.9303.4.1.6.1.8
Supported single mode fiber link length (m). A value of 255000 means > 254000 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsXFPMultiMode50Len		1.3.6.1.4.1.9303.4.1.6.1.9
Supported 50um multi-mode fiber link length (m). A value of 510 means > 508 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsXFPMultiMode625Len		1.3.6.1.4.1.9303.4.1.6.1.10
Supported 62.5um multi-mode fiber link length (m). A value of 255 means > 254 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsXFPCopperLen		1.3.6.1.4.1.9303.4.1.6.1.11
Supported copper link length (m). A value of 255 means > 254 m.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wsXFPTempStatus		1.3.6.1.4.1.9303.4.1.6.1.12
Temperature status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsXFPTemp		1.3.6.1.4.1.9303.4.1.6.1.13
Measured temperature in degrees centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsXFPTXCurrentStatus		1.3.6.1.4.1.9303.4.1.6.1.14
TX Current status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsXFPTXCurrent		1.3.6.1.4.1.9303.4.1.6.1.15
Measured TX current (mA).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsXFPTXPowerStatus		1.3.6.1.4.1.9303.4.1.6.1.16
TX power status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsXFPTXPower		1.3.6.1.4.1.9303.4.1.6.1.17
Measured TX power (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsXFPRXPowerStatus		1.3.6.1.4.1.9303.4.1.6.1.18
RX power status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5)

wsXFPRXPower		1.3.6.1.4.1.9303.4.1.6.1.19
Measured RX power (uW).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsIbosEnvironmentNotifications		1.3.6.1.4.1.9303.4.1.2.0
OBJECT IDENTIFIER

wsIbosTempLow		1.3.6.1.4.1.9303.4.1.2.0.1
A wsIbosTempLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined low threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

wsIbosTempHigh		1.3.6.1.4.1.9303.4.1.2.0.2
A wsIbosTempHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined high threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

wsIbosVoltLow		1.3.6.1.4.1.9303.4.1.2.0.3
A wsIbosVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined low threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

wsIbosVoltHigh		1.3.6.1.4.1.9303.4.1.2.0.4
A wsIbosVoltHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined high threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

wsIbosFanRPMLow		1.3.6.1.4.1.9303.4.1.2.0.5
A wsIbosFanRPMLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its fans's RPM is lower than the system defined threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

wsIbosFanOutVoltLow		1.3.6.1.4.1.9303.4.1.2.0.6
A wsIbosFanOutVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that its fan output voltage is lower than the system defined threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE