VPNPOLICY-MIB
File:
VPNPOLICY-MIB.mib (92451 bytes)
Imported modules
Imported symbols
Defined Types
| VpPolicyEntry |
|
| SEQUENCE |
|
|
|
| |
vpPolName |
DisplayString |
|
| |
vpPolStatus |
INTEGER |
|
| |
vpPolPriority |
INTEGER |
|
| |
vpPolValidity |
INTEGER |
|
| |
vpPolTrafficProfileRef |
DisplayString |
|
| |
vpPolValidityPeriodRef |
DisplayString |
|
| |
vpPolRsvpActionRef |
DisplayString |
|
| |
vpPolDiffServActionRef |
DisplayString |
|
| |
vpPolIsakmpActionRef |
DisplayString |
|
| |
vpPolSecurityActionRef |
DisplayString |
|
| |
vpPolIpsecManualTunId |
INTEGER |
|
| |
vpPolMatches |
Counter |
|
| VpPolicyRulePriEntry |
|
| SEQUENCE |
|
|
|
| |
vpPolRulePriOrder |
INTEGER |
|
| |
vpPolRulePriName |
DisplayString |
|
| |
vpPolRulePriStatus |
INTEGER |
|
| |
vpPolRulePriPriority |
INTEGER |
|
| |
vpPolRulePriTrafficProfileRef |
DisplayString |
|
| |
vpPolRulePriValidityPeriodRef |
DisplayString |
|
| |
vpPolRulePriRsvpActionRef |
DisplayString |
|
| |
vpPolRulePriDiffServActionRef |
DisplayString |
|
| |
vpPolRulePriIsakmpActionRef |
DisplayString |
|
| |
vpPolRulePriSecurityActionRef |
DisplayString |
|
| |
vpPolRulePriIpsecManualTunId |
INTEGER |
|
| VpPolicyCorEntry |
|
| SEQUENCE |
|
|
|
| |
vpPolCorRuleOrder |
INTEGER |
|
| |
vpPolCorRulePriOrder |
INTEGER |
|
| VpTrafficProfileEntry |
|
| SEQUENCE |
|
|
|
| |
vpTrafProfName |
DisplayString |
|
| |
vpTrafProfHiProtocol |
INTEGER |
|
| |
vpTrafProfLoProtocol |
INTEGER |
|
| |
vpTrafProfSrcHiAddr |
VpIpAddress |
|
| |
vpTrafProfSrcLoAddr |
VpIpAddress |
|
| |
vpTrafProfSrcHiPort |
INTEGER |
|
| |
vpTrafProfSrcLoPort |
INTEGER |
|
| |
vpTrafProfDstHiAddr |
VpIpAddress |
|
| |
vpTrafProfDstLoAddr |
VpIpAddress |
|
| |
vpTrafProfDstHiPort |
INTEGER |
|
| |
vpTrafProfDstLoPort |
INTEGER |
|
| |
vpTrafProfRcvTosByteMask |
OCTET STRING |
|
| |
vpTrafProfRcvTosByteMatch |
OCTET STRING |
|
| |
vpTrafProfLocIdType |
INTEGER |
|
| |
vpTrafProfLocIdValue |
DisplayString |
|
| |
vpTrafProfRemGroup |
DisplayString |
|
| VpTrafficIfEntry |
|
| SEQUENCE |
|
|
|
| |
vpTrafIfIndex |
INTEGER |
|
| |
vpTrafIfInAddr |
VpIpAddress |
|
| |
vpTrafIfOutAddr |
VpIpAddress |
|
| VpTrafficRemIdEntry |
|
| SEQUENCE |
|
|
|
| |
vpTrafRemIdIndex |
INTEGER |
|
| |
vpTrafRemIdType |
INTEGER |
|
| |
vpTrafRemIdValue |
DisplayString |
|
| |
vpTrafRemIdAuthMode |
INTEGER |
|
| VpValidityPeriodEntry |
|
| SEQUENCE |
|
|
|
| |
vpValPrdName |
DisplayString |
|
| |
vpValPrdStartTime |
OCTET STRING |
|
| |
vpValPrdEndTime |
OCTET STRING |
|
| |
vpValPrdMonthMask |
OCTET STRING |
|
| |
vpValPrdDaysMask |
OCTET STRING |
|
| |
vpValPrdStartTod |
OCTET STRING |
|
| |
vpValPrdStopTod |
OCTET STRING |
|
| VpRsvpActionEntry |
|
| SEQUENCE |
|
|
|
| |
vpRsvpActName |
DisplayString |
|
| |
vpRsvpActPermission |
INTEGER |
|
| |
vpRsvpActMaxRatePerFlow |
INTEGER |
|
| |
vpRsvpActMaxTokenBucketPerFlow |
INTEGER |
|
| |
vpRsvpActMaxFlowDuration |
INTEGER |
|
| |
vpRsvpActMinDelay |
INTEGER |
|
| |
vpRsvpActDiffSvrRef |
DisplayString |
|
| |
vpRsvpActMatches |
Counter |
|
| VpDiffServActionEntry |
|
| SEQUENCE |
|
|
|
| |
vpDifSrvActName |
DisplayString |
|
| |
vpDifSrvActPermission |
INTEGER |
|
| |
vpDifSrvActQuePriority |
INTEGER |
|
| |
vpDifSrvActBwType |
INTEGER |
|
| |
vpDifSrvActBwShare |
INTEGER |
|
| |
vpDifSrvActTransTosByteMask |
OCTET STRING |
|
| |
vpDifSrvActTransTosByteMatch |
OCTET STRING |
|
| |
vpDifSrvActMatches |
Counter |
|
| VpIsakmpActionEntry |
|
| SEQUENCE |
|
|
|
| |
vpIkActName |
DisplayString |
|
| |
vpIkActExchangeMode |
INTEGER |
|
| |
vpIkActConnSaLifeTime |
INTEGER |
|
| |
vpIkActConnSaLifeSize |
INTEGER |
|
| |
vpIkActPolicyRole |
INTEGER |
|
| |
vpIkActMinPercentRefresh |
INTEGER |
|
| |
vpIkActAutoStart |
INTEGER |
|
| |
vpIkActMatches |
Counter |
|
| VpIsakmpProposalEntry |
|
| SEQUENCE |
|
|
|
| |
vpIkPropName |
DisplayString |
|
| |
vpIkPropAuthMethod |
INTEGER |
|
| |
vpIkPropHashAlgo |
INTEGER |
|
| |
vpIkPropCipherAlgo |
INTEGER |
|
| |
vpIkPropDiffHellmanGrpId |
INTEGER |
|
| |
vpIkPropSaLifeTime |
INTEGER |
|
| |
vpIkPropSaLifeSize |
INTEGER |
|
| VpIsakmpCorEntry |
|
| SEQUENCE |
|
|
|
| |
vpIkCorPropOrder |
INTEGER |
|
| |
vpIkCorPropName |
DisplayString |
|
| VpIsakmpActiveInstEntry |
|
| SEQUENCE |
|
|
|
| |
vpIkActInstOrder |
INTEGER |
|
| |
vpIkActInstTunnelId |
OCTET STRING |
|
| |
vpIkActInstTunnelIndex |
INTEGER |
|
| VpSecurityActionEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecActName |
DisplayString |
|
| |
vpSecActType |
INTEGER |
|
| |
vpSecActTunStartAddr |
VpIpAddress |
|
| |
vpSecActTunEndAddr |
VpIpAddress |
|
| |
vpSecActLocProxyType |
INTEGER |
|
| |
vpSecActLocProxyValue |
DisplayString |
|
| |
vpSecActLocProxyProtocol |
INTEGER |
|
| |
vpSecActLocProxySrcPort |
INTEGER |
|
| |
vpSecActRemProxyType |
INTEGER |
|
| |
vpSecActRemProxyValue |
DisplayString |
|
| |
vpSecActRemProxyProtocol |
INTEGER |
|
| |
vpSecActRemProxySrcPort |
INTEGER |
|
| |
vpSecActSaRefreshThresh |
INTEGER |
|
| |
vpSecActMinPercentRefresh |
INTEGER |
|
| |
vpSecActTunnelInTunnel |
INTEGER |
|
| |
vpSecActAutoStart |
INTEGER |
|
| |
vpSecActDontFragBitHandling |
INTEGER |
|
| |
vpSecActReplayPrevention |
INTEGER |
|
| |
vpSecActMatches |
Counter |
|
| VpSecurityProposalEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecPropName |
DisplayString |
|
| |
vpSecPropPrfFwdSecr |
INTEGER |
|
| |
vpSecPropDiffHellmanGrpId |
INTEGER |
|
| VpSecurityAhTransEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecAhTransName |
DisplayString |
|
| |
vpSecAhTransIntgAlgo |
INTEGER |
|
| |
vpSecAhTransEncapMode |
INTEGER |
|
| |
vpSecAhTransSaLifeTime |
INTEGER |
|
| |
vpSecAhTransSaLifeSize |
INTEGER |
|
| VpSecurityEspTransEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecEspTransName |
DisplayString |
|
| |
vpSecEspTransEncapMode |
INTEGER |
|
| |
vpSecEspTransIntgAlgo |
INTEGER |
|
| |
vpSecEspTransCipherAlgo |
INTEGER |
|
| |
vpSecEspTransSaLifeTime |
INTEGER |
|
| |
vpSecEspTransSaLifeSize |
INTEGER |
|
| VpSecurityIpcompTransEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecIpcompTransName |
DisplayString |
|
| |
vpSecIpcompTransAlgo |
INTEGER |
|
| |
vpSecIpcompTransVendAlgo |
INTEGER |
|
| |
vpSecIpcompTransSaLifeTime |
INTEGER |
|
| |
vpSecIpcompTransSaLifeSize |
INTEGER |
|
| VpSecurityPropCorEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecCorPropOrder |
INTEGER |
|
| |
vpSecCorPropRef |
DisplayString |
|
| VpSecurityAhCorEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecAhTransCorOrder |
INTEGER |
|
| |
vpSecAhTransCorName |
DisplayString |
|
| VpSecurityEspCorEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecEspTransCorOrder |
INTEGER |
|
| |
vpSecEspTransCorName |
DisplayString |
|
| VpSecurityIpcompCorEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecIpcompTransCorOrder |
INTEGER |
|
| |
vpSecIpcompTransCorName |
DisplayString |
|
| VpSecurityActiveInstEntry |
|
| SEQUENCE |
|
|
|
| |
vpSecActInstOrder |
INTEGER |
|
| |
vpSecActInstTunnelId |
INTEGER |
|
| |
vpSecActInstTunnelIndex |
INTEGER |
|
| VpTestPolicyEntry |
|
| SEQUENCE |
|
|
|
| |
vpTestPolIndex |
INTEGER |
|
| |
vpTestPolSrcAddr |
VpIpAddress |
|
| |
vpTestPolSrcPort |
INTEGER |
|
| |
vpTestPolDstAddr |
VpIpAddress |
|
| |
vpTestPolDstPort |
INTEGER |
|
| |
vpTestPolProtocol |
INTEGER |
|
| |
vpTestPolTosByte |
OCTET STRING |
|
| |
vpTestPolIngressAddr |
VpIpAddress |
|
| |
vpTestPolEgressAddr |
VpIpAddress |
|
| |
vpTestPolResult |
INTEGER |
|
| |
vpTestPolStatus |
INTEGER |
|
| |
vpTestPolRsvpPolicy |
DisplayString |
|
| |
vpTestPolRsvpAction |
DisplayString |
|
| |
vpTestPolDiffServPolicy |
DisplayString |
|
| |
vpTestPolDiffServAction |
DisplayString |
|
| |
vpTestPolIsakmpPolicy |
DisplayString |
|
| |
vpTestPolIsakmpAction |
DisplayString |
|
| |
vpTestPolIPSecPolicy |
DisplayString |
|
| |
vpTestPolIPSecAction |
DisplayString |
|
Defined Values
| vpSystem |
1.3.6.1.4.1.2.6.119.4.15.1 |
| OBJECT IDENTIFIER |
|
|
|
| vpPolicy |
1.3.6.1.4.1.2.6.119.4.15.2 |
| OBJECT IDENTIFIER |
|
|
|
| vpActions |
1.3.6.1.4.1.2.6.119.4.15.4 |
| OBJECT IDENTIFIER |
|
|
|
| vpTests |
1.3.6.1.4.1.2.6.119.4.15.5 |
| OBJECT IDENTIFIER |
|
|
|
| vpSysMibLevel |
1.3.6.1.4.1.2.6.119.4.15.1.1.1 |
| The level of the IBM VPN Policy MIB. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSysUpTime |
1.3.6.1.4.1.2.6.119.4.15.1.1.2 |
| The length of time in hundredths of a second that the
policy definitions have been active. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| vpSysCurTime |
1.3.6.1.4.1.2.6.119.4.15.1.1.3 |
| The current time in seconds since 1900. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| vpSysHoursFromCut |
1.3.6.1.4.1.2.6.119.4.15.1.1.4 |
| The number of hours from Coordinated Universal Time
which is abbreviated UTC as specified by the
International Telecommunications Union.
1 = (UTC -0)...Coordinated Universal Time; United Kingdom
2 = (UTC -1)...Azores; Cape Verde
3 = (UTC -2)...Falkland Islands
4 = (UTC -3)...Greenland; East Brazil
5 = (UTC -4)...Central Brazil
6 = (UTC -5)...Eastern U.S.; Colombia
7 = (UTC -6)...Central U.S.; Honduras
8 = (UTC -7)...Mountain U.S.
9 = (UTC -8)...Pacific U.S.; Yukon
10 = (UTC -9)...Alaska
11 = (UTC-10)...Hawaii; Aleutian
12 = (UTC-11)...Bering Straits
13 = (UTC +1)...Norway; France
14 = (UTC +2)...Finland; South Africa
15 = (UTC +3)...Turkey; Saudi Arabia
16 = (UTC +4)...Gorki; Central Asia; Oman
17 = (UTC +5)...Pakistan
18 = (UTC +6)...Tashkent; Central Asia
19 = (UTC +7)...Thailand
20 = (UTC +8)...Western Australia
21 = (UTC +9)...Japan; Korea
22 = (UTC+10)...Eastern Australia
23 = (UTC+11)...Solomon Islands
24 = (UTC+12)...New Zealand |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
utcMinus0(1), utcMinus1(2), utcMinus2(3), utcMinus3(4), utcMinus4(5), utcMinus5(6), utcMinus6(7), utcMinus7(8), utcMinus8(9), utcMinus9(10), utcMinus10(11), utcMinus11(12), utcPlus1(13), utcPlus2(14), utcPlus3(15), utcPlus4(16), utcPlus5(17), utcPlus6(18), utcPlus7(19), utcPlus8(20), utcPlus9(21), utcPlus10(22), utcPlus11(23), utcPlus12(24) |
|
| vpSysCurConfigSource |
1.3.6.1.4.1.2.6.119.4.15.1.1.5 |
| The current configuration source location(s).
1 = policy refresh in progress
2 = no policies were found in any source location
3 = policies were found in all source locations
4 = policies were found in SRAM
5 = policies were found in LDAP. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
refreshInProgress(1), none(2), allSources(3), sram(4), ldap(5) |
|
| vpSysRefreshConfig |
1.3.6.1.4.1.2.6.119.4.15.1.1.6 |
| This object provides the ability to refresh the system's policies
when set and provides the source of the last refresh when read.
1 = refresh policies from the operational (active) policy
source location(s)
2 = refresh policies from the administrative (configured) policy
source location(s). |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
fromOperDefs(1), fromAdminDefs(2) |
|
| vpLdapGlobal |
1.3.6.1.4.1.2.6.119.4.15.1.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| vpLdapGblOperLdapStatus |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.1 |
| The current status of the LDAP Operational parameter values. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| vpLdapGblOperPrimServerAddr |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.2 |
| The current operational value of the IP Address for
the Primary LDAP Server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpLdapGblOperSecServerAddr |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.3 |
| The current operational value of the IP Address for
the Secondary LDAP Server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpLdapGblOperServerLdapLvl |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.4 |
| The current operational value of the LDAP Server Level. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblOperPolicyBaseName |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.5 |
| The current operational value of the Base Name
to use when retrieving policies from the LDAP Server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpLdapGblOperPortNumber |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.6 |
| The current operational value of the Port Number
to use when retrieving policies from the LDAP Server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblOperTimeOut |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.7 |
| The current operational value of the Time-Out Period
to use when retrieving policies from the LDAP Server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblOperRetryInterval |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.8 |
| The current operational value of the Retry Interval
to use when retrieving policies from the LDAP Server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblOperUserId |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.1.9 |
| The current operational value of the User ID
to use when retrieving policies from the LDAP Server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpLdapGblAdminLdapStatus |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.2.1 |
| The configured status of the LDAP Administrative parameter values. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| vpLdapGblAdminServerLdapLvl |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.2.4 |
| The configured LDAP Server level. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblAdminPolicyBaseName |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.2.5 |
| The configured Base Name to use when retrieving policies
from the LDAP Server. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpLdapGblAdminPortNumber |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.2.6 |
| The configured Port Number to use when retrieving policies
from the LDAP Server. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblAdminTimeOut |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.2.7 |
| The configured Time-Out period in seconds to use when
retrieving policies from the LDAP Server. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblAdminRetryInterval |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.2.8 |
| The configured Retry Interval in seconds to use when
retrieving policies from the LDAP Server. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpLdapGblAdminUserId |
1.3.6.1.4.1.2.6.119.4.15.1.2.1.2.9 |
| The configured User ID to use when retrieving policies
from the LDAP Server. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolicyTable |
1.3.6.1.4.1.2.6.119.4.15.2.1 |
| The VPN Policy Table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VpPolicyEntry |
|
| vpPolicyEntry |
1.3.6.1.4.1.2.6.119.4.15.2.1.1 |
| A VPN Policy Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpPolicyEntry |
|
|
| vpPolName |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.1 |
| The VPN Policy Name. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolStatus |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.2 |
| The current status of the VPN Policy.
1 = enabled
2 = disabled. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| vpPolPriority |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.3 |
| The priority of VPN Policy. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| vpPolValidity |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.4 |
| The validity of VPN Policy. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
valid(1), invalid(2) |
|
| vpPolTrafficProfileRef |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.5 |
| The name of the Traffic Profile for the VPN Policy.
This name can be used to index directly into the
vpTrafficProfileTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolValidityPeriodRef |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.6 |
| The name of the Validity Period for the VPN Policy.
This name can be used to index directly into the
vpValidityPeriodTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolRsvpActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.7 |
| The name of the RSVP Action for the VPN Policy.
This name can be used to index directly into the
vpRsvpActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolDiffServActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.8 |
| The name of the Differential Services Action for the VPN Policy.
This name can be used to index directly into the
vpDiffServActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolIsakmpActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.9 |
| The name of the ISAKMP Action for the VPN Policy.
This name can be used to index directly into the
vpIsakmpActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolSecurityActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.10 |
| The name of the Security Action for the VPN Policy.
This name can be used to index directly into the
vpSecurityActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolIpsecManualTunId |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.11 |
| The ID of manually configured IPSec Phase-2 Tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpPolMatches |
1.3.6.1.4.1.2.6.119.4.15.2.1.1.12 |
| The number of packet matches for this VPN Policy. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| vpPolicyRulePriEntry |
1.3.6.1.4.1.2.6.119.4.15.2.2.1 |
| A VPN Policy Rule Priority Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpPolicyRulePriEntry |
|
|
| vpPolRulePriOrder |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.1 |
| The priority of this VPN Rule relative to all VPN Rules. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpPolRulePriStatus |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.3 |
| The current status of the VPN Policy Rule.
1 = enabled
2 = disabled. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| vpPolRulePriPriority |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.4 |
| The VPN Policy Rule Priority. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpPolRulePriTrafficProfileRef |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.5 |
| The name of the Traffic Profile for the VPN Policy Rule.
This name can be used to index directly into the
vpTrafficProfileTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolRulePriValidityPeriodRef |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.6 |
| The name of the Validity Period for the VPN Policy.
This name can be used to index directly into the
vpValidityPeriodTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolRulePriRsvpActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.7 |
| The name of the RSVP Action for the VPN Policy.
This name can be used to index directly into the
vpRsvpActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolRulePriDiffServActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.8 |
| The name of the Differential Services Action for the VPN Policy.
This name can be used to index directly into the
vpDiffServActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolRulePriIsakmpActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.9 |
| The name of the ISAKMP Action for the VPN Policy.
This name can be used to index directly into the
vpIsakmpActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolRulePriSecurityActionRef |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.10 |
| The name of the Security Action for the VPN Policy.
This name can be used to index directly into the
vpSecurityActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpPolRulePriIpsecManualTunId |
1.3.6.1.4.1.2.6.119.4.15.2.2.1.11 |
| The ID of manually configured IPSec Phase-2 Tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpPolicyCorTable |
1.3.6.1.4.1.2.6.119.4.15.2.3 |
| The VPN Policy Correlation Table. This table can be used
to correlate VPN Policies with VPN Policy Rules. A VPN Policy
may be associated with one or more VPN Policy Rules. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VpPolicyCorEntry |
|
| vpPolicyCorEntry |
1.3.6.1.4.1.2.6.119.4.15.2.3.1 |
| A VPN Policy Correlation Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpPolicyCorEntry |
|
|
| vpPolCorRuleOrder |
1.3.6.1.4.1.2.6.119.4.15.2.3.1.1 |
| The order of this VPN Rule relative to other
VPN Rules for this VPN Policy. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpPolCorRulePriOrder |
1.3.6.1.4.1.2.6.119.4.15.2.3.1.2 |
| The priority of this VPN Rule relative to all VPN Rules.
This number can be used to index directly into the
vpPolicyRulePriTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafficProfileEntry |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1 |
| A Traffic Profile Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpTrafficProfileEntry |
|
|
| vpTrafProfName |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.1 |
| The name of the Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTrafProfHiProtocol |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.2 |
| The high protocol number for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafProfLoProtocol |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.3 |
| The low protocol number for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafProfSrcHiAddr |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.4 |
| The high source IP Address for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTrafProfSrcLoAddr |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.5 |
| The low source IP Address for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTrafProfSrcHiPort |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.6 |
| The high source port number for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafProfSrcLoPort |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.7 |
| The low source port number for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafProfDstHiAddr |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.8 |
| The high destination IP Address for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTrafProfDstLoAddr |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.9 |
| The low destination IP Address for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTrafProfDstHiPort |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.10 |
| The high destination port number for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafProfDstLoPort |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.11 |
| The low destination port number for this Traffic Profile. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafProfRcvTosByteMask |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.12 |
| The Type of Service (TOS) Byte Mask Value. This is a 8-bit mask
which is be applied to an incoming packet's TOS byte. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| vpTrafProfRcvTosByteMatch |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.13 |
| The Type of Service (TOS) Byte Match Value. This is a 8-bit pattern
which is used to compare to the value of the result
of the ANDing of the incoming TOS byte and the mask value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| vpTrafProfLocIdType |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.14 |
| The Traffic Local Identification Type. This value
is used in interpreting the Traffic Local
Identification Value.
1 = IP V4 Address
2 = Fully Qualified Domain Name
3 = User Fully Qualified Domain Name
9 = Domain Name
10 = Global Name
11 = Key ID
99 = Any |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ipV4Addr(1), fqdn(2), userFqdn(3), dn(9), gn(10), keyId(11), any(99) |
|
| vpTrafProfLocIdValue |
1.3.6.1.4.1.2.6.119.4.15.3.1.1.1.15 |
| The Traffic Local Identification Value.
See vpTrafProfLocIdType for more information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTrafficIfEntry |
1.3.6.1.4.1.2.6.119.4.15.3.1.2.1 |
| A Traffic Interface Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpTrafficIfEntry |
|
|
| vpTrafIfIndex |
1.3.6.1.4.1.2.6.119.4.15.3.1.2.1.1 |
| The Traffic Interface index. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafIfInAddr |
1.3.6.1.4.1.2.6.119.4.15.3.1.2.1.2 |
| The Traffic Interface Inbound IP Address. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTrafIfOutAddr |
1.3.6.1.4.1.2.6.119.4.15.3.1.2.1.3 |
| The Traffic Interface Outbound IP Address. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTrafficRemIdEntry |
1.3.6.1.4.1.2.6.119.4.15.3.1.3.1 |
| A Traffic Remote Identification Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpTrafficRemIdEntry |
|
|
| vpTrafRemIdIndex |
1.3.6.1.4.1.2.6.119.4.15.3.1.3.1.1 |
| The Traffic Remote Identification Index. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTrafRemIdType |
1.3.6.1.4.1.2.6.119.4.15.3.1.3.1.2 |
| The Traffic Remote Identification Type. This value
is used in interpreting the Traffic Remote
Identification Value.
1 = IP V4 Address
2 = Fully Qualified Domain Name
3 = User Fully Qualified Domain Name
9 = Domain Name
10 = Global Name
11 = Key ID |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ipV4Addr(1), fqdn(2), userFqdn(3), dn(9), gn(10), keyId(11) |
|
| vpTrafRemIdValue |
1.3.6.1.4.1.2.6.119.4.15.3.1.3.1.3 |
| The Traffic Remote Identification Value.
See vpTrafRemIdValueType for more information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTrafRemIdAuthMode |
1.3.6.1.4.1.2.6.119.4.15.3.1.3.1.4 |
| The Traffic Remote Identification Authentication Mode.
1 = preshared key
2 = certificate |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
preShareKey(1), cert(2) |
|
| vpValidityPeriodEntry |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1 |
| A Validity Period Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpValidityPeriodEntry |
|
|
| vpValPrdName |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1.1 |
| The name of the Validity Period. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpValPrdStartTime |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1.2 |
| The Validity Start Time in seconds since 1900.
A value of xFF:FF:FF:FF signifies forever. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| vpValPrdEndTime |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1.3 |
| The Validity End Time in seconds since 1900.
A value of xFF:FF:FF:FF signifies forever. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| vpValPrdMonthMask |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1.4 |
| The Month Mask for this Validity Period.
Each Bit in the Mask represents a month.
Octet 2 Octet 1
---------------------- -------------------------------
7-4 3 2 1 0 7 6 5 4 3 2 1 0
0's Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| vpValPrdDaysMask |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1.5 |
| The Days-Of-The-Week Mask for this Validity Period.
Each Bit in the Mask represents a day.
Octet 1
-------------------------------
7 6 5 4 3 2 1 0
0 Mon Tue Wed Thr Fri Sat Sun |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| vpValPrdStartTod |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1.6 |
| The Validity Period Start Time-Of-Day. It is represented
in the number of seconds since 00:00 AM. A value of
xFF:FF:FF:FF signifies all day. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| vpValPrdStopTod |
1.3.6.1.4.1.2.6.119.4.15.3.2.1.1.7 |
| The Validity Period End Time-Of-Day. It is represented
in the number of seconds since 00:00 AM. A value of
xFF:FF:FF:FF signifies all day. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| vpRsvpActionEntry |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1 |
| A RSVP Action Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpRsvpActionEntry |
|
|
| vpRsvpActName |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.1 |
| The name of the RSVP Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpRsvpActPermission |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.2 |
| Permit or deny RSVP requests of with the type of
vpRsvpActFlowSvrType. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
permit(1), deny(2) |
|
| vpRsvpActMaxRatePerFlow |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.3 |
| The Maximum Amount of Bandwidth in Kbytes-Per-Second that
RSVP should be allowed to allocate for one individual flow. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpRsvpActMaxTokenBucketPerFlow |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.4 |
| The Maximum Token Bucket to allocate for a RSVP flow. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpRsvpActMaxFlowDuration |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.5 |
| The Maximum Amount of Time in seconds that
RSVP should allow a reservation to be active. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpRsvpActMinDelay |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.6 |
| The Minimum Delay in milliseconds that RSVP should be allowed
to reserve for an individual RSVP reservation. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpRsvpActDiffSvrRef |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.7 |
| The name of the Differential Services Action for this RSVP Action.
This name can be used to index directly into the
vpDiffServActionTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpRsvpActMatches |
1.3.6.1.4.1.2.6.119.4.15.4.1.1.1.8 |
| The number of packet matches for this RSVP Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| vpDiffServActionEntry |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1 |
| A Differential Services Action Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpDiffServActionEntry |
|
|
| vpDifSrvActName |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.1 |
| The name of the Differential Services Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpDifSrvActPermission |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.2 |
| Permit or Deny traffic matching the Traffic Profile.
This parameter is used as a filter rule to control
which IP traffic is allowed to be forwarded. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
permit(1), deny(2) |
|
| vpDifSrvActQuePriority |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.3 |
| The Queue Priority to be used for traffic. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
premium(1), bestEffort(2) |
|
| vpDifSrvActBwType |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.4 |
| Specifies whether the bandwidth share is a
percentage of the output bandwidth or an
absolute number in Kbytes-Per-Second.
See also vpDifSrvActBwShare. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
absolute(1), percent(2) |
|
| vpDifSrvActBwShare |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.5 |
| The amount of bandwidth to allocate for packets
matching this Differential Services Action.
Bandwidth may be specified by percentage of
output bandwidth or by an absolute number in
Kbytes-Per-Second.
See also vpDifSrvActBwType. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpDifSrvActTransTosByteMask |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.6 |
| The Type of Service (TOS) Byte Mask Value. This is a 8-bit mask
which is be applied to an incoming packet's TOS byte. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| vpDifSrvActTransTosByteMatch |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.7 |
| The Type of Service (TOS) Byte Match Value. This is a 8-bit pattern
which is used to compare to the value of the result
of the ANDing of the incoming TOS byte and the mask value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| vpDifSrvActMatches |
1.3.6.1.4.1.2.6.119.4.15.4.2.1.1.8 |
| The number of packet matches for this
Differential Services Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| vpIsakmpActionEntry |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1 |
| An ISAKMP Action Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpIsakmpActionEntry |
|
|
| vpIkActName |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.1 |
| The name of the ISAKMP Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpIkActExchangeMode |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.2 |
| The Exchange Mode for ISAKMP Phase-1 negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
main(1), aggressive(2) |
|
| vpIkActConnSaLifeTime |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.3 |
| The Lifetime of the ISAKMP Phase-1 Connection. This
specifies the amount of time in seconds after which
the Phase-1 Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpIkActConnSaLifeSize |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.4 |
| The Lifesize of the ISAKMP Phase-1 Connection. This
specifies the amount of traffic in Kbytes after which
the Phase-1 Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpIkActPolicyRole |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.5 |
| The ISAKMP Policy Role.
1 = Initiator
2 = Responder
3 = Initiator and Responder |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
initiator(1), responder(2), initAndResp(3) |
|
| vpIkActMinPercentRefresh |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.6 |
| The minimium percentage of the ISAKMP Phase-1 proposals
Lifetime that should be considered valid during ISAKMP
Phase-1 negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..100 |
|
| vpIkActAutoStart |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.7 |
| The ISAKMP Auto Start setting. When enabled the
Security Association must be automatically negotiated
at system initialization. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disable(2) |
|
| vpIkActMatches |
1.3.6.1.4.1.2.6.119.4.15.4.3.1.1.8 |
| The number of packet matches for this
ISAKMP Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| vpIsakmpProposalEntry |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1 |
| An ISAKMP Proposal Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpIsakmpProposalEntry |
|
|
| vpIkPropName |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1.1 |
| The name of the ISAKMP Proposal. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpIkPropAuthMethod |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1.2 |
| The Authentication Method to use in ISAKMP Phase-1 negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
preShardKey(1), dssSig(2), rsaSig(3), rsaEncrypt(4), revRsaEncrypt(5) |
|
| vpIkPropHashAlgo |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1.3 |
| The Hash Algorithm to use in ISAKMP Phase-1 negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
md5(1), sha(2) |
|
| vpIkPropCipherAlgo |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1.4 |
| The Cipher Algorithm to use in ISAKMP Phase-1 negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
des(1), des3(2) |
|
| vpIkPropDiffHellmanGrpId |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1.5 |
| The Diffie Hellman Group to use in ISAKMP Phase-1 negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
dhGrp1(1), dhGrp2(2) |
|
| vpIkPropSaLifeTime |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1.6 |
| The Lifetime of the ISAKMP Phase-1 Connection. This
specifies the amount of time in seconds after which
the Phase-1 Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpIkPropSaLifeSize |
1.3.6.1.4.1.2.6.119.4.15.4.3.2.1.7 |
| The Lifesize of the ISAKMP Phase-1 Connection. This
specifies the amount of traffic in Kbytes after which
the Phase-1 Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpIsakmpCorTable |
1.3.6.1.4.1.2.6.119.4.15.4.3.3 |
| The ISAKMP Correlation Table. This table can be used to
to correlate ISAKMP Actions with ISAKMP Proposals. An ISAKMP Action
may be associated with one or more ISAKMP Proposals. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VpIsakmpCorEntry |
|
| vpIsakmpCorEntry |
1.3.6.1.4.1.2.6.119.4.15.4.3.3.1 |
| An ISAKMP Correlation Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpIsakmpCorEntry |
|
|
| vpIkCorPropOrder |
1.3.6.1.4.1.2.6.119.4.15.4.3.3.1.1 |
| The Proposal Order for the ISAKMP Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpIkCorPropName |
1.3.6.1.4.1.2.6.119.4.15.4.3.3.1.2 |
| The name of the ISAKMP Proposal.
This name can be used to index directly into the
vpIsakmpProposalTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpIsakmpActiveInstEntry |
1.3.6.1.4.1.2.6.119.4.15.4.3.4.1 |
| An ISAKMP Active Instance Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpIsakmpActiveInstEntry |
|
|
| vpIkActInstOrder |
1.3.6.1.4.1.2.6.119.4.15.4.3.4.1.1 |
| The Active Instance Creation Order for the ISAKMP Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpIkActInstTunnelId |
1.3.6.1.4.1.2.6.119.4.15.4.3.4.1.2 |
| The ISAKMP Phase-1 Tunnel ID. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| vpIkActInstTunnelIndex |
1.3.6.1.4.1.2.6.119.4.15.4.3.4.1.3 |
| The ISAKMP Phase-1 Tunnel Index (ikeTunnelIndex from
the IBM IPSec MIB). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecurityActionEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1 |
| A Security Action Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityActionEntry |
|
|
| vpSecActName |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.1 |
| The name of the Security Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecActType |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.2 |
| The Type of action which should be performed to
packets matching the Traffic Profile of a Policy
specifying this action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
permit(1), block(2) |
|
| vpSecActTunStartAddr |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.3 |
| The IP Address of the IPSec Tunnel Starting Point. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpSecActTunEndAddr |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.4 |
| The IP Address of the IPSec Tunnel Ending Point. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpSecActLocProxyType |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.5 |
| The Local Proxy Type. This value
is used in interpreting the Local
Proxy Value.
1 = IP V4 Address
2 = Fully Qualified Domain Name
3 = User Fully Qualified Domain Name
4 = IP V4 Address Subnet
7 = IP V4 Address Range
9 = Domain Name
10 = Global Name
11 = Key ID |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ipV4Addr(1), fqdn(2), userFqdn(3), ipV4Subnet(4), ipV4Range(7), dn(9), gn(10), keyId(11) |
|
| vpSecActLocProxyValue |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.6 |
| The Local Proxy Value.
See vpSecActLocProxyType for more information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecActLocProxyProtocol |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.7 |
| The Local Proxy Protocol. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecActLocProxySrcPort |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.8 |
| The Local Proxy Source Port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecActRemProxyType |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.9 |
| The Remote Proxy Type. This value
is used in interpreting the Remote
Proxy Value.
1 = IP V4 Address
2 = Fully Qualified Domain Name
3 = User Fully Qualified Domain Name
4 = IP V4 Address Subnet
7 = IP V4 Address Range
9 = Domain Name
10 = Global Name
11 = Key ID |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ipV4Addr(1), fqdn(2), userFqdn(3), ipV4Subnet(4), ipV4Range(7), dn(9), gn(10), keyId(11) |
|
| vpSecActRemProxyValue |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.10 |
| The Remote Proxy Value.
See vpSecActRemProxyType for more information. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecActRemProxyProtocol |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.11 |
| The Remote Proxy Protocol. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecActRemProxySrcPort |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.12 |
| The Remote Proxy Source Port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecActSaRefreshThresh |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.13 |
| The IPSec Security Association Refresh Threshold.
The value is represented as a percentage of the
Security Association Lifetime or Security Association
Lifesize. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..100 |
|
| vpSecActMinPercentRefresh |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.14 |
| The minimium percentage of the Security Associations
Lifetime that should be considered valid during
IPSec negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..100 |
|
| vpSecActTunnelInTunnel |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.15 |
| Specifies whether or not this IPSec Tunnel is
protected by another tunnel. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
yes(1), no(2) |
|
| vpSecActAutoStart |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.16 |
| The IPSec Auto Start setting. When enabled the
Security Association must be automatically negotiated
at system initialization. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disable(2) |
|
| vpSecActDontFragBitHandling |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.17 |
| The IPSec processing to perform on the Don't Fragment (DF)
Bit when building a new package header.
in the original
1 = Copy the DF Bit from the orginal header to
the new header
2 = Set (Turn On) the DF Bit in the new header
3 = Clear (Turn Off) the DF Bit in the new header |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
copyDfBit(1), setDfBit(2), clearDfBit(3) |
|
| vpSecActReplayPrevention |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.18 |
| The IPSec Replay Prevention setting. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disable(2) |
|
| vpSecActMatches |
1.3.6.1.4.1.2.6.119.4.15.4.4.1.1.19 |
| The number of packet matches for this
Securtiy Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| vpSecurityProposalEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.2.1 |
| A Security Proposal Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityProposalEntry |
|
|
| vpSecPropName |
1.3.6.1.4.1.2.6.119.4.15.4.4.2.1.1 |
| The name of the Security Proposal. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecPropPrfFwdSecr |
1.3.6.1.4.1.2.6.119.4.15.4.4.2.1.2 |
| The state of the Perfect Forward Secrecy function. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| vpSecPropDiffHellmanGrpId |
1.3.6.1.4.1.2.6.119.4.15.4.4.2.1.3 |
| The Diffie Hellman Group to use in IPSec Phase-2 negotiations. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
dhGrp1(1), dhGrp2(2) |
|
| vpSecurityAhTransEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.3.1 |
| A Security AH Transform Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityAhTransEntry |
|
|
| vpSecAhTransIntgAlgo |
1.3.6.1.4.1.2.6.119.4.15.4.4.3.1.2 |
| The AH Integrity Algorithm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
hmacMd5(1), hmacSha(2) |
|
| vpSecAhTransEncapMode |
1.3.6.1.4.1.2.6.119.4.15.4.4.3.1.3 |
| The AH Encapsulation Mode. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
tunnel(1), transport(2) |
|
| vpSecAhTransSaLifeTime |
1.3.6.1.4.1.2.6.119.4.15.4.4.3.1.4 |
| The Lifetime of the AH Security Association. This
specifies the amount of time in seconds after which
the AH Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecAhTransSaLifeSize |
1.3.6.1.4.1.2.6.119.4.15.4.4.3.1.5 |
| The Lifesize of the AH Security Association. This
specifies the amount of traffic in Kbytes after which
the AH Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecurityEspTransEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.4.1 |
| A Security ESP Transform Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityEspTransEntry |
|
|
| vpSecEspTransEncapMode |
1.3.6.1.4.1.2.6.119.4.15.4.4.4.1.2 |
| The ESP Encapsulation Mode. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
tunnel(1), transport(2) |
|
| vpSecEspTransIntgAlgo |
1.3.6.1.4.1.2.6.119.4.15.4.4.4.1.3 |
| The ESP Integrity Algorithm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), md5(2), sha(3) |
|
| vpSecEspTransCipherAlgo |
1.3.6.1.4.1.2.6.119.4.15.4.4.4.1.4 |
| The ESP Cipher Alogrithm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), des(2), des3(3), cdmf(4) |
|
| vpSecEspTransSaLifeTime |
1.3.6.1.4.1.2.6.119.4.15.4.4.4.1.5 |
| The Lifetime of the ESP Security Association. This
specifies the amount of time in seconds after which
the ESP Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecEspTransSaLifeSize |
1.3.6.1.4.1.2.6.119.4.15.4.4.4.1.6 |
| The Lifesize of the ESP Security Association. This
specifies the amount of traffic in Kbytes after which
the ESP Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecurityIpcompTransEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.5.1 |
| A Security IPCOMP Transform Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityIpcompTransEntry |
|
|
| vpSecIpcompTransAlgo |
1.3.6.1.4.1.2.6.119.4.15.4.4.5.1.2 |
| The IPCOMP Alogrithm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecIpcompTransVendAlgo |
1.3.6.1.4.1.2.6.119.4.15.4.4.5.1.3 |
| The IPCOMP Vendor Alogrithm. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecIpcompTransSaLifeTime |
1.3.6.1.4.1.2.6.119.4.15.4.4.5.1.4 |
| The Lifetime of the IPCOMP Security Association. This
specifies the amount of time in seconds after which
the IPCOMP Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecIpcompTransSaLifeSize |
1.3.6.1.4.1.2.6.119.4.15.4.4.5.1.5 |
| The Lifesize of the IPCOMP Security Association. This
specifies the amount of traffic in Kbytes after which
the IPCOMP Security Association is renegotiated. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecurityPropCorTable |
1.3.6.1.4.1.2.6.119.4.15.4.4.6 |
| The Security Proposal Correlation Table. This table can be used to
to correlate Security Actions with Security Proposals. A Security
Action may be associated with one or more Security Proposals. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VpSecurityPropCorEntry |
|
| vpSecurityPropCorEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.6.1 |
| A Security Proposal Correlation Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityPropCorEntry |
|
|
| vpSecCorPropOrder |
1.3.6.1.4.1.2.6.119.4.15.4.4.6.1.1 |
| The Proposal Order for the Security Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecCorPropRef |
1.3.6.1.4.1.2.6.119.4.15.4.4.6.1.2 |
| The name of the Security Proposal.
This name can be used to index directly into the
vpSecurityProposalTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecurityAhCorTable |
1.3.6.1.4.1.2.6.119.4.15.4.4.7 |
| The Security AH Transform Correlation Table. This table can be used
to correlate Security Proposals with AH Transforms. A Security
Proposal may be associated with one or more AH Transforms. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VpSecurityAhCorEntry |
|
| vpSecurityAhCorEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.7.1 |
| A Security AH Transform Correlation Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityAhCorEntry |
|
|
| vpSecAhTransCorOrder |
1.3.6.1.4.1.2.6.119.4.15.4.4.7.1.1 |
| The AH Transform Order for the Security Proposal. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecAhTransCorName |
1.3.6.1.4.1.2.6.119.4.15.4.4.7.1.2 |
| The name of the AH Transform.
This name can be used to index directly into the
vpSecurityAhTransformTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecurityEspCorTable |
1.3.6.1.4.1.2.6.119.4.15.4.4.8 |
| The Security ESP Transform Correlation Table. This table can be used
to correlate Security Proposals with ESP Transforms. A Security
Proposal may be associated with one or more ESP Transforms. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VpSecurityEspCorEntry |
|
| vpSecurityEspCorEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.8.1 |
| A Security Security ESP Transform Correlation Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityEspCorEntry |
|
|
| vpSecEspTransCorOrder |
1.3.6.1.4.1.2.6.119.4.15.4.4.8.1.1 |
| The ESP Transform Order for the Security Proposal. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecEspTransCorName |
1.3.6.1.4.1.2.6.119.4.15.4.4.8.1.2 |
| The name of the ESP Transform.
This name can be used to index directly into the
vpSecurityEspTransformTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecurityIpcompCorTable |
1.3.6.1.4.1.2.6.119.4.15.4.4.9 |
| The Security IPCOMP Transform Correlation Table. This table can be
used to correlate Security Proposals with IPCOMP Transforms.
A Security Proposal may be associated with one or more
IPCOMP Transforms. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
VpSecurityIpcompCorEntry |
|
| vpSecurityIpcompCorEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.9.1 |
| A Security Security IPCOMP Transform Correlation Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityIpcompCorEntry |
|
|
| vpSecIpcompTransCorOrder |
1.3.6.1.4.1.2.6.119.4.15.4.4.9.1.1 |
| The IPCOMP Transform Order for the Security Proposal. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecIpcompTransCorName |
1.3.6.1.4.1.2.6.119.4.15.4.4.9.1.2 |
| The name of the IPCOMP Transform.
This name can be used to index directly into the
vpSecurityIpcompTransformTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpSecurityActiveInstEntry |
1.3.6.1.4.1.2.6.119.4.15.4.4.10.1 |
| A Security Active Instance Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpSecurityActiveInstEntry |
|
|
| vpSecActInstOrder |
1.3.6.1.4.1.2.6.119.4.15.4.4.10.1.1 |
| The Active Instance Order for the Security Action. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecActInstTunnelId |
1.3.6.1.4.1.2.6.119.4.15.4.4.10.1.2 |
| The IPSec Phase-2 Tunnel ID. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpSecActInstTunnelIndex |
1.3.6.1.4.1.2.6.119.4.15.4.4.10.1.3 |
| The IPSec Phase-2 Tunnel Index (ipSecTunnelIndex from
the IBM IPSec MIB). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTestPolicyEntry |
1.3.6.1.4.1.2.6.119.4.15.5.1.1 |
| A Policy Test Table entry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
VpTestPolicyEntry |
|
|
| vpTestPolIndex |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.1 |
| The index of the Policy Test Table.
The value of the index is a number which was specified
during row creation. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTestPolSrcAddr |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.2 |
| The packet source IP Address which was specified
during row creation. This object may not be altered
after the row is created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTestPolSrcPort |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.3 |
| The packet source port which was specified
during row creation. This object may not be altered
after the row is created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTestPolDstAddr |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.4 |
| The packet destination IP Address which was specified
during row creation. This object may not be altered
after the row is created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTestPolDstPort |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.5 |
| The packet destination port which was specified
during row creation. This object may not be altered
after the row is created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTestPolProtocol |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.6 |
| The packet protocol which was specified
during row creation. This object may not be altered
after the row is created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| vpTestPolTosByte |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.7 |
| The packet Type of Service (TOS) Byte which was specified
during row creation. This object may not be altered
after the row is created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| vpTestPolIngressAddr |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.8 |
| The IP address of the device interface which received the packet.
An IP address of 0.0.0.0 should be used to test policies which
do NOT have Ingress/Egress interface definitions. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTestPolEgressAddr |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.9 |
| The IP address of the device interface which will be used to
send the packet.
An IP address of 0.0.0.0 should be used to test policies which
do NOT have Ingress/Egress interface definitions. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
VpIpAddress |
|
|
| vpTestPolResult |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.10 |
| The result of the test. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
inProgress(1), successful(2), noPolicyMatch(3) |
|
| vpTestPolStatus |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.11 |
| This object is used to create a new row. It may
not be altered after the row is created. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), createAndGo(4) |
|
| vpTestPolRsvpPolicy |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.12 |
| The RSVP Policy Name found for this test.
If the result of this test is successful, this object
is will contain the a valid policy name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTestPolRsvpAction |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.13 |
| The Rsvp Action Name found for this test.
If the result of this test is successful, this object
is will contain the a valid action name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTestPolDiffServPolicy |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.14 |
| The Differential Services Policy Name found for this test.
If the result of this test is successful, this object
is will contain the a valid policy name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTestPolDiffServAction |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.15 |
| The Differential Services Action Name found for this test.
If the result of this test is successful, this object
is will contain the a valid action name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTestPolIsakmpPolicy |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.16 |
| The ISAKMP Policy Name found for this test.
If the result of this test is successful, this object
is will contain the a valid policy name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTestPolIsakmpAction |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.17 |
| The ISAKMP Action Name found for this test.
If the result of this test is successful, this object
is will contain the a valid action name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTestPolIPSecPolicy |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.18 |
| The IPSec Policy Name found for this test.
If the result of this test is successful, this object
is will contain the a valid policy name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| vpTestPolIPSecAction |
1.3.6.1.4.1.2.6.119.4.15.5.1.1.19 |
| The IPSec Action Name found for this test.
If the result of this test is successful, this object
is will contain the a valid action name if a match was
found or NULL if a match was not found. If the result
is not successful, the value of this object will be NULL. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|