VPN-PERFORMANCE-MIB
File:
VPN-PERFORMANCE-MIB.mib
(12804 bytes)
Imported modules
SNMPv2-SMI
SNMPv2-CONF
SNMPv2-TC
Imported symbols
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Integer32
mib-2
IpAddress
Counter32
NOTIFICATION-TYPE
MODULE-COMPLIANCE
OBJECT-GROUP
NOTIFICATION-GROUP
DisplayString
Defined Types
VpnPerformanceIfEntry
SEQUENCE
vpnPerformanceIndex
Integer32
vpnPerformanceIfLocalAddress
IpAddress
vpnPerformanceIfRemoteAddress
IpAddress
vpnPerformanceIfPollPeriod
TimeTicks
vpnPerformanceIfHighThreshold
TimeTicks
vpnPerformanceIfLostPackets
Counter32
vpnPerformanceIfRearmThreshold
TimeTicks
vpnPerformanceIfHolddownThreshold
TimeTicks
vpnPerformanceIfLastRoundTripTime
TimeTicks
VpnPerformanceTrapEntry
SEQUENCE
vpnPerformanceTrapIndex
Integer32
vpnPerformanceTrapSequence
Counter32
vpnPerformanceTrapText
DisplayString
vpnPerformanceTrapPriority
Integer32
vpnPerformanceTrapTime
Counter32
vpnPerformanceTrapSuspect
IpAddress
Defined Values
vpnPerformanceMIB
1.3.6.1.2.1.1
The MIB module for performance management of VPN tunnels.
MODULE-IDENTITY
vpnPerformanceMIBObjects
1.3.6.1.2.1.1.1
OBJECT IDENTIFIER
vpnPerformanceTrapNotifications
1.3.6.1.2.1.1.1.0
OBJECT IDENTIFIER
vpnPerformance
1.3.6.1.2.1.1.1.1
OBJECT IDENTIFIER
vpnPerformanceTRAP
1.3.6.1.2.1.1.1.2
OBJECT IDENTIFIER
vpnPerformanceIfTable
1.3.6.1.2.1.1.1.1.1
The table containing line entries for each VPN tunnel.
Status: current
Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
VpnPerformanceIfEntry
vpnPerformanceIfEntry
1.3.6.1.2.1.1.1.1.1.1
A line entry containing information about a particular configured tunnel.
Status: current
Access: not-accessible
OBJECT-TYPE
VpnPerformanceIfEntry
vpnPerformanceIndex
1.3.6.1.2.1.1.1.1.1.1.1
A unique value for each table entry.
Status: current
Access: not-accessible
OBJECT-TYPE
Integer32
1..2147483647
vpnPerformanceIfLocalAddress
1.3.6.1.2.1.1.1.1.1.1.2
The address of the local VPN tunnel endpoint.
Status: current
Access: read-only
OBJECT-TYPE
IpAddress
vpnPerformanceIfRemoteAddress
1.3.6.1.2.1.1.1.1.1.1.3
The address of the remote VPN tunnel endpoint.
Status: current
Access: read-only
OBJECT-TYPE
IpAddress
vpnPerformanceIfPollPeriod
1.3.6.1.2.1.1.1.1.1.1.4
The time period used to send performance packets to the remote end of the VPN tunnel.
Status: current
Access: read-write
OBJECT-TYPE
TimeTicks
vpnPerformanceIfHighThreshold
1.3.6.1.2.1.1.1.1.1.1.5
The time threshold used to compare round trip values against.
Status: current
Access: read-write
OBJECT-TYPE
TimeTicks
vpnPerformanceIfLostPackets
1.3.6.1.2.1.1.1.1.1.1.6
The counting threshold used to compare the number of lost packet values against.
Status: current
Access: read-only
OBJECT-TYPE
Counter32
vpnPerformanceIfRearmThreshold
1.3.6.1.2.1.1.1.1.1.1.7
The rearm threshold used to compare successive alarm values against.
Status: current
Access: read-write
OBJECT-TYPE
TimeTicks
vpnPerformanceIfHolddownThreshold
1.3.6.1.2.1.1.1.1.1.1.8
The holddown threshold used to compare successive alarm values against.
Status: current
Access: read-write
OBJECT-TYPE
TimeTicks
vpnPerformanceIfLastRoundTripTime
1.3.6.1.2.1.1.1.1.1.1.9
The last round trip value collected.
Status: current
Access: read-write
OBJECT-TYPE
TimeTicks
vpnPerformanceTrapTable
1.3.6.1.2.1.1.1.2.1
The agent's table containing the alarm information.
Status: current
Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
VpnPerformanceTrapEntry
vpnPerformanceTrapEntry
1.3.6.1.2.1.1.1.2.1.1
Information about the last trap generated by the agent. There is always one entry in this table, indexed by the integer value 1.
Status: current
Access: not-accessible
OBJECT-TYPE
VpnPerformanceTrapEntry
vpnPerformanceTrapIndex
1.3.6.1.2.1.1.1.2.1.1.1
A unique value for each table entry.
Status: current
Access: not-accessible
OBJECT-TYPE
Integer32
1..2147483647
vpnPerformanceTrapSequence
1.3.6.1.2.1.1.1.2.1.1.2
A counter of the number of alarms generated since the agent for last initialised.
Status: current
Access: read-only
OBJECT-TYPE
Counter32
vpnPerformanceTrapText
1.3.6.1.2.1.1.1.2.1.1.3
Trap text to make the alarm obvious.
Status: current
Access: read-write
OBJECT-TYPE
DisplayString
vpnPerformanceTrapPriority
1.3.6.1.2.1.1.1.2.1.1.4
The priority level as set on the agent for this type of trap.
Status: current
Access: read-only
OBJECT-TYPE
Integer32
1..255
vpnPerformanceTrapTime
1.3.6.1.2.1.1.1.2.1.1.5
The time that the condition or event occurred which generated the alarm. The value is given in seconds since 00:00:00 Greenwich Mean Time (GMT) January 1, 1970.
Status: current
Access: read-only
OBJECT-TYPE
Counter32
vpnPerformanceTrapSuspect
1.3.6.1.2.1.1.1.2.1.1.6
An ASCII string describing the host which caused the alarm.
Status: current
Access: read-only
OBJECT-TYPE
IpAddress
vpnPerformanceTrapLostPackets
1.3.6.1.2.1.1.1.0.1
The agent has detected the number of lost packets has exceeded a threshold.
Status: current
Access: read-only
NOTIFICATION-TYPE
vpnPerformanceTrapLostPacketsOk
1.3.6.1.2.1.1.1.0.2
The agent has detected the number of lost packets has dropped below a threshold.
Status: current
Access: read-only
NOTIFICATION-TYPE
vpnPerformanceNotificationsGroup
1.3.6.1.2.1.1.1.0.3
Generic VPN Performance Notifications.
Status: current
Access: read-only
NOTIFICATION-GROUP
vpnPerformanceConformance
1.3.6.1.2.1.1.2
OBJECT IDENTIFIER
vpnPerformanceTrapConformance
1.3.6.1.2.1.1.3
OBJECT IDENTIFIER
vpnPerformanceCompliances
1.3.6.1.2.1.1.2.1
OBJECT IDENTIFIER
vpnPerformanceGroups
1.3.6.1.2.1.1.2.2
OBJECT IDENTIFIER
vpnPerformanceTrapCompliances
1.3.6.1.2.1.1.3.1
OBJECT IDENTIFIER
vpnPerformanceTrapGroups
1.3.6.1.2.1.1.3.2
OBJECT IDENTIFIER
vpnPerformanceCompliance
1.3.6.1.2.1.1.2.1.1
The compliance statement for SNMPv2 entities which implement the VPN performance module.
Status: current
Access: read-only
MODULE-COMPLIANCE
vpnPerformanceTrapCompliance
1.3.6.1.2.1.1.3.1.1
The compliance statement for SNMPv2 entities which implement the VPN performance trap module.
Status: current
Access: read-only
MODULE-COMPLIANCE
vpnPerformanceGroup
1.3.6.1.2.1.1.2.2.1
The vpnPerformance group of objects providing for the management of VPN performance metrics.
Status: current
Access: read-only
OBJECT-GROUP
vpnPerformanceTrapGroup
1.3.6.1.2.1.1.3.2.1
The vpnPerformance group of objects providing for the management of VPN performance traps.
Status: current
Access: read-only
OBJECT-GROUP