VERILINK-ENTERPRISE-NCMISDN-MIB

File: VERILINK-ENTERPRISE-NCMISDN-MIB.mib (36855 bytes)

Imported modules

RFC1213-MIB

RFC-1212

VERILINK-ENTERPRISE-NCMALARM-MIB

Imported symbols

DisplayString

OBJECT-TYPE

ncm-isdn

Defined Types

NcmPRIPortConfigEntry
SEQUENCE
	ncmPRIPortNIDIndex	INTEGER
	ncmPRIPortLineIndex	INTEGER
	ncmPRIPortInService	INTEGER
	ncmPRIPortNFASMode	INTEGER
	ncmPRIPortDChanMode	INTEGER
	ncmPRIPortDChanBits	INTEGER
	ncmPRIPortTimeslotMap	DisplayString
	ncmPRIPortSwitchType	INTEGER
	ncmPRIPortOwnNumPlan	INTEGER
	ncmPRIPortOwnNumType	INTEGER
	ncmPRIPortSecurityLevel	INTEGER
	ncmPRIPortConfigStatus	INTEGER
	ncmPRIPortSetConfig	INTEGER
	ncmPRICallProfCallRefCount	INTEGER
	ncmPRIL2AutoEstablish	INTEGER
	ncmPRIResetCard	INTEGER

NcmPRICallProfEntry
SEQUENCE
	ncmPRICallProfNIDIndex	INTEGER
	ncmPRICallProfLineIndex	INTEGER
	ncmPRICPCallProfileRef	INTEGER
	ncmPRICallProfCallDir	INTEGER
	ncmPRICallProfNumOwnDigit	INTEGER
	ncmPRICallProfOwnCallNum	DisplayString
	ncmPRICallProfExtNumPlan	INTEGER
	ncmPRICallProfExtNumType	INTEGER
	ncmPRICallProfExtNumDigit	INTEGER
	ncmPRICallProfExtCallNum	DisplayString
	ncmPRICallProfTransferMode	INTEGER
	ncmPRICallProfCallBandWth	INTEGER
	ncmPRICallProfMultiRateCnt	INTEGER
	ncmPRICallProfRateAdaptn	INTEGER
	ncmPRICallProfTestCallIntvl	INTEGER
	ncmPRICallProfCallStatus	INTEGER
	ncmPRICallProfCallAction	INTEGER
	ncmPRICPSetCallProf	INTEGER
	ncmPRICPSetCallProfResp	INTEGER
	ncmPRICPCallActionResp	INTEGER

NcmPRICallProfListEntry
SEQUENCE
	ncmPRICPListNIDIndex	INTEGER
	ncmPRICPListLineIndex	INTEGER
	ncmPRICPListIndex	INTEGER
	ncmPRICPListValidCPRefNum	INTEGER

NcmPRICurrentEntry
SEQUENCE
	ncmPRICurrNIDIndex	INTEGER
	ncmPRICurrLineIndex	INTEGER
	ncmPRICurrEndType	INTEGER
	ncmPRICurrTimestamp	INTEGER
	ncmPRICurrSecsInCurrIntvl	INTEGER
	ncmPRICurrInfoRx	INTEGER
	ncmPRICurrInfoTx	INTEGER
	ncmPRICurrCRCErrRx	INTEGER
	ncmPRICurrInvalidFrameRx	INTEGER
	ncmPRICurrFrameAbortRx	INTEGER
	ncmPRICurrDISCSRx	INTEGER
	ncmPRICurrDISCSTx	INTEGER
	ncmPRICurrFramerRx	INTEGER
	ncmPRICurrFramerTx	INTEGER
	ncmPRICurrLyr3ProtErr	INTEGER
	ncmPRICurrCallSetupSent	INTEGER
	ncmPRICurrCallSetupSentnFail	INTEGER
	ncmPRICurrCallSetupRx	INTEGER
	ncmPRICurrCallSetupRxnFail	INTEGER
	ncmPRICurrUnSupportMsgRx	INTEGER
	ncmPRICurrTstCalSetupSentnFail	INTEGER
	ncmPRICurrValidIntvls	INTEGER
	ncmPRICurrStatisticReset	INTEGER

NcmPRIIntervalEntry
SEQUENCE
	ncmPRIntvlNIDIndex	INTEGER
	ncmPRIntvlLineIndex	INTEGER
	ncmPRIntvlEndType	INTEGER
	ncmPRIntvlIndex	INTEGER
	ncmPRIntvlTimestamp	INTEGER
	ncmPRIntvlSecsInCurrIntvl	INTEGER
	ncmPRIntvlInfoRx	INTEGER
	ncmPRIntvlInfoTx	INTEGER
	ncmPRIntvlCRCErrRx	INTEGER
	ncmPRIntvlInvalidFrameRx	INTEGER
	ncmPRIntvlFrameAbortRx	INTEGER
	ncmPRIntvlDISCSRx	INTEGER
	ncmPRIntvlDISCSTx	INTEGER
	ncmPRIntvlFramerRx	INTEGER
	ncmPRIntvlFramerTx	INTEGER
	ncmPRIntvlLyr3ProtErr	INTEGER
	ncmPRIntvlCallSetupSent	INTEGER
	ncmPRIntvlCallSetupSentnFail	INTEGER
	ncmPRIntvlCallSetupRx	INTEGER
	ncmPRIntvlCallSetupRxnFail	INTEGER
	ncmPRIntvlUnSupportMsgRx	INTEGER
	ncmPRIntvlTstCalSetupSentnFail	INTEGER

Defined Values

ncmPRIPortConfigTable		10.1.321.1.3031.8000
The PRI Port Configuration table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmPRIPortConfigEntry

ncmPRIPortConfigEntry		10.1.321.1.3031.8000.1
An entry in the PRI Port Configuration table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmPRIPortConfigEntry

ncmPRIPortNIDIndex		10.1.321.1.3031.8000.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRIPortLineIndex		10.1.321.1.3031.8000.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRIPortInService		10.1.321.1.3031.8000.1.3
The object specifies whether the PRI Port is in service or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmPRIPortNFASMode		10.1.321.1.3031.8000.1.4
The variable specifies the Pri NFAS mode. For DPRI card, it has selections of 1)No Nfas, 2)Nfas For QPRI card, it has selections of 1)No Nfas, 2)Nfas on 4, 3)Nfas w/D WARNING: The card must be reset for this change to take effect !
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-nFas(1), nFas(2), nFas-on-4(3), nFas-w-D(4)

ncmPRIPortDChanMode		10.1.321.1.3031.8000.1.5
The variable specifies the pri D-channel mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), inverted(2)

ncmPRIPortDChanBits		10.1.321.1.3031.8000.1.6
The variable specifies the pri D-channel bits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	chan-8-Bit(1), chan-7-Bit(2), chan-6-Bit(3)

ncmPRIPortTimeslotMap		10.1.321.1.3031.8000.1.7
The variable specifies the timeslot map.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmPRIPortSwitchType		10.1.321.1.3031.8000.1.8
The variable specifies the pri switch type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sw-Unspecified(1), sw-Att-4Ess(2), sw-Att-5Ess(3), sw-Att-Reserved(4), sw-Nti-Dms100(5), sw-Ni-2(6)

ncmPRIPortOwnNumPlan		10.1.321.1.3031.8000.1.9
The variable specifies the pri own numbering plan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumPlan(1), isdn-E164(2), telephony-E163(3), private(10)

ncmPRIPortOwnNumType		10.1.321.1.3031.8000.1.10
The variable specifies the pri own numbering type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumType(1), international(2), national(3), local(5)

ncmPRIPortSecurityLevel		10.1.321.1.3031.8000.1.11
The variable specifies the fdl mode which is bit 0 of fdl Parameter1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-Checks(1), own-Numbers(2), ext-Numbers(3), both-Numbers(4)

ncmPRIPortConfigStatus		10.1.321.1.3031.8000.1.12
The variable specifies the configuration result.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	configuration-OK(1), configuration-Error(2)

ncmPRIPortSetConfig		10.1.321.1.3031.8000.1.13
The set configuration operation that involves sending out the ACP message to set the configuration with the setup parameters
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	set-Config(1), not-in-use(2)

ncmPRICallProfCallRefCount		10.1.321.1.3031.8000.1.14
The variable specifies the number of valid call reference numbers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIL2AutoEstablish		10.1.321.1.3031.8000.1.15
The object specifies whether the PRI Port has an Auto establishment for Layer-2 or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmPRIResetCard		10.1.321.1.3031.8000.1.16
The reset card operation that involves sending out the ACP message to reset the card
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	reset-Card(1), not-in-use(2)

ncmPRICallProfileTable		10.1.321.1.3031.8001
The PRI Call Profile table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmPRICallProfEntry

ncmPRICallProfEntry		10.1.321.1.3031.8001.1
An entry in the PRI Call Profile table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmPRICallProfEntry

ncmPRICallProfNIDIndex		10.1.321.1.3031.8001.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRICallProfLineIndex		10.1.321.1.3031.8001.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRICPCallProfileRef		10.1.321.1.3031.8001.1.3
The variable specifies the number of the call profile in the list (starting from one, then two and so on).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmPRICallProfCallDir		10.1.321.1.3031.8001.1.4
The variable specifies the call direction.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-Direction(1), incoming(2), outgoing(3), both-Directions(4)

ncmPRICallProfNumOwnDigit		10.1.321.1.3031.8001.1.5
The variable specifies the number of own digits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmPRICallProfOwnCallNum		10.1.321.1.3031.8001.1.6
The variable specifies the own call number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmPRICallProfExtNumPlan		10.1.321.1.3031.8001.1.7
The variable specifies the external numbering plan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumPlan(1), isdn-E164(2), telephony-E163(3), private(10)

ncmPRICallProfExtNumType		10.1.321.1.3031.8001.1.8
The variable specifies the external numbering type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumType(1), international(2), national(3), local(5)

ncmPRICallProfExtNumDigit		10.1.321.1.3031.8001.1.9
The variable specifies the external number of digits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmPRICallProfExtCallNum		10.1.321.1.3031.8001.1.10
The variable specifies the external call number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmPRICallProfTransferMode		10.1.321.1.3031.8001.1.11
The variable specifies the transfer mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unrestricted-digital(8), restricted-digital(9)

ncmPRICallProfCallBandWth		10.1.321.1.3031.8001.1.12
The variable specifies the call bandwidth.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	b1-64K(16), h0-6X64K(19), h11-24X64K(21), h12-30X64K(23), multiRate(24)

ncmPRICallProfMultiRateCnt		10.1.321.1.3031.8001.1.13
The variable specifies the multirate count.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	mR-2(2), mR-4(4), mR-6(6), mR-8(8), mR-12(12), mR-23(23), mR-24(24), mR-30(30), mR-31(31)

ncmPRICallProfRateAdaptn		10.1.321.1.3031.8001.1.14
The variable specifies the rate adaptation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-Adapt(1), adapt-56K(2)

ncmPRICallProfTestCallIntvl		10.1.321.1.3031.8001.1.15
The variable specifies the test call interval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmPRICallProfCallStatus		10.1.321.1.3031.8001.1.16
The variable specifies the get call profile call status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fail-Takedown-Idle(1), successful-Setup(2), unknown(3)

ncmPRICallProfCallAction		10.1.321.1.3031.8001.1.17
The variable specifies the call profile call action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	setup-Call(1), takedown-Call(2)

ncmPRICPSetCallProf		10.1.321.1.3031.8001.1.18
The variable specifies the call profile call action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	set-CallProf(1), not-in-use(2)

ncmPRICPSetCallProfResp		10.1.321.1.3031.8001.1.19
The variable specifies the set call profile result
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	configuration-OK(1), configuration-Error(2)

ncmPRICPCallActionResp		10.1.321.1.3031.8001.1.20
The variable specifies the call action result
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	configuration-OK(1), configuration-Error(2)

ncmPRICallProfListTable		10.1.321.1.3031.8002
The PRI Call Profile List table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmPRICallProfListEntry

ncmPRICallProfListEntry		10.1.321.1.3031.8002.1
An entry in the PRI Call Profile List table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmPRICallProfListEntry

ncmPRICPListNIDIndex		10.1.321.1.3031.8002.1.1
The object specifies the node id of the node of the call profile list group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRICPListLineIndex		10.1.321.1.3031.8002.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRICPListIndex		10.1.321.1.3031.8002.1.3
The call profile list call reference index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICPListValidCPRefNum		10.1.321.1.3031.8002.1.4
The variable is the valid call reference number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrentTable		10.1.321.1.3031.8003
The PRI Current Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmPRICurrentEntry

ncmPRICurrentEntry		10.1.321.1.3031.8003.1
An entry in the PRI Current Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmPRICurrentEntry

ncmPRICurrNIDIndex		10.1.321.1.3031.8003.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRICurrLineIndex		10.1.321.1.3031.8003.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRICurrEndType		10.1.321.1.3031.8003.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmPRICurrTimestamp		10.1.321.1.3031.8003.1.4
The object specifies the timestamp in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrSecsInCurrIntvl		10.1.321.1.3031.8003.1.5
The object specifies the seconds in current interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrInfoRx		10.1.321.1.3031.8003.1.6
The object specifies the current INFOs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrInfoTx		10.1.321.1.3031.8003.1.7
The object specifies the current INFOs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrCRCErrRx		10.1.321.1.3031.8003.1.8
The object specifies the current CRC errors received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrInvalidFrameRx		10.1.321.1.3031.8003.1.9
The object specifies the current invalid frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrFrameAbortRx		10.1.321.1.3031.8003.1.10
The object specifies the current frame aborts received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrDISCSRx		10.1.321.1.3031.8003.1.11
The object specifies the current DISCs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrDISCSTx		10.1.321.1.3031.8003.1.12
The object specifies the current DISCs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrFramerRx		10.1.321.1.3031.8003.1.13
The object specifies the current framer received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrFramerTx		10.1.321.1.3031.8003.1.14
The object specifies the current framer transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrLyr3ProtErr		10.1.321.1.3031.8003.1.15
The object specifies the current Layer 3 protocol errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrCallSetupSent		10.1.321.1.3031.8003.1.16
The object specifies the current call setup sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrCallSetupSentnFail		10.1.321.1.3031.8003.1.17
The object specifies the current call setup sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrCallSetupRx		10.1.321.1.3031.8003.1.18
The object specifies the current call setup received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrCallSetupRxnFail		10.1.321.1.3031.8003.1.19
The object specifies the current call setup received and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrUnSupportMsgRx		10.1.321.1.3031.8003.1.20
The object specifies the current unsupported message received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrTstCalSetupSentnFail		10.1.321.1.3031.8003.1.21
The object specifies the current test call setups sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrValidIntvls		10.1.321.1.3031.8003.1.22
A number between 1 and 96
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRICurrStatisticReset		10.1.321.1.3031.8003.1.23
The variable specifies the statistic reset operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	statistic-Reset(1)

ncmPRIIntervalTable		10.1.321.1.3031.8004
The PRI Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmPRIIntervalEntry

ncmPRIIntervalEntry		10.1.321.1.3031.8004.1
An entry in the PRI Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmPRIIntervalEntry

ncmPRIntvlNIDIndex		10.1.321.1.3031.8004.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRIntvlLineIndex		10.1.321.1.3031.8004.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPRIntvlEndType		10.1.321.1.3031.8004.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmPRIntvlIndex		10.1.321.1.3031.8004.1.4
The interval index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlTimestamp		10.1.321.1.3031.8004.1.5
The object specifies the interval timestamp in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlSecsInCurrIntvl		10.1.321.1.3031.8004.1.6
The object specifies the interval seconds in current interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlInfoRx		10.1.321.1.3031.8004.1.7
The object specifies the interval INFOs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlInfoTx		10.1.321.1.3031.8004.1.8
The object specifies the interval INFOs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlCRCErrRx		10.1.321.1.3031.8004.1.9
The object specifies the interval CRC errors received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlInvalidFrameRx		10.1.321.1.3031.8004.1.10
The object specifies the interval invalid frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlFrameAbortRx		10.1.321.1.3031.8004.1.11
The object specifies the interval frame aborts received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlDISCSRx		10.1.321.1.3031.8004.1.12
The object specifies the interval DISCs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlDISCSTx		10.1.321.1.3031.8004.1.13
The object specifies the interval DISCs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlFramerRx		10.1.321.1.3031.8004.1.14
The object specifies the interval framer received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlFramerTx		10.1.321.1.3031.8004.1.15
The object specifies the interval framer transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlLyr3ProtErr		10.1.321.1.3031.8004.1.16
The object specifies the interval Layer 3 protocol errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlCallSetupSent		10.1.321.1.3031.8004.1.17
The object specifies the interval call setup sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlCallSetupSentnFail		10.1.321.1.3031.8004.1.18
The object specifies the interval call setup sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlCallSetupRx		10.1.321.1.3031.8004.1.19
The object specifies the interval call setup received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlCallSetupRxnFail		10.1.321.1.3031.8004.1.20
The object specifies the interval call setup received and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlUnSupportMsgRx		10.1.321.1.3031.8004.1.21
The object specifies the interval unsupported message received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPRIntvlTstCalSetupSentnFail		10.1.321.1.3031.8004.1.22
The object specifies the interval test call setups sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER