VCP-PRIVATE-MIB-VER-2
File:
VCP-PRIVATE-MIB-VER-2.mib (191345 bytes)
Imported modules
Imported symbols
Defined Types
VPortEntry |
|
SEQUENCE |
|
|
|
|
vPortIndex |
INTEGER |
|
|
vPortType |
INTEGER |
|
|
vPortName |
DisplayString |
|
|
vPortUserName |
DisplayString |
|
|
vPortState |
INTEGER |
|
|
vPortLogout |
INTEGER |
|
|
vPortActiveSessions |
INTEGER |
|
|
vPortCurrSessNumber |
INTEGER |
|
|
vPortCurrSessProt |
OBJECT IDENTIFIER |
|
|
vPortAccess |
INTEGER |
|
|
vPortVirtualEnable |
INTEGER |
|
|
vPortVirtualString |
OCTET STRING |
|
|
vPortSessionLimit |
INTEGER |
|
|
vPortProfile |
DisplayString |
|
|
vPortQueueing |
INTEGER |
|
|
vPortPasswordEnable |
INTEGER |
|
|
vPortTacacsEnable |
INTEGER |
|
|
vPortSecurity |
INTEGER |
|
|
vPortGroups |
LtGroupList |
|
|
vPortBreakMode |
INTEGER |
|
|
vPortBackSwitch |
Character |
|
|
vPortForwSwitch |
Character |
|
|
vPortLocalSwitch |
Character |
|
|
vPortPrefSvc |
DisplayString |
|
|
vPortPrefNode |
DisplayString |
|
|
vPortPrefPort |
DisplayString |
|
|
vPortPrefMode |
INTEGER |
|
|
vPortAutoConnect |
INTEGER |
|
|
vPortPrompt |
DisplayString |
|
|
vPortInactiveLogout |
INTEGER |
|
|
vPortAutoPrompt |
INTEGER |
|
|
vPortBroadcastEnable |
INTEGER |
|
|
vPortInterrupts |
INTEGER |
|
|
vPortMessageCodes |
INTEGER |
|
|
vPortVerification |
INTEGER |
|
|
vPortDialup |
INTEGER |
|
|
vPortRemoteModify |
INTEGER |
|
|
vPortAbsoluteLogout |
INTEGER |
|
|
vPortIOflush |
INTEGER |
|
|
vPortLogoutMsgEnable |
INTEGER |
|
|
vPortScreenType |
INTEGER |
|
|
vPortFlowType |
INTEGER |
|
|
vPortInFlowState |
INTEGER |
|
|
vPortOutFlowState |
INTEGER |
|
|
vPortCTSstate |
INTEGER |
|
|
vPortDSRstate |
INTEGER |
|
|
vPortDCDstate |
INTEGER |
|
|
vPortDTRstate |
INTEGER |
|
|
vPortRIstate |
INTEGER |
|
|
vPortRTSstate |
INTEGER |
|
|
vPortSpeed |
INTEGER |
|
|
vPortCharSize |
INTEGER |
|
|
vPortParityType |
INTEGER |
|
|
vPortAutobaud |
INTEGER |
|
|
vPortModemControl |
INTEGER |
|
|
vPortDSRlogout |
INTEGER |
|
|
vPortRing |
INTEGER |
|
|
vPortDTRwait |
INTEGER |
|
|
vPortSignalCheckEnable |
INTEGER |
|
|
vPortHandshake |
INTEGER |
|
|
vPortRcvChars |
Counter |
|
|
vPortTrnChars |
Counter |
|
|
vPortFrameErrs |
Counter |
|
|
vPortOverrunErrs |
Counter |
|
|
vPortParityErrs |
Counter |
|
|
vPortCharsDropped |
Counter |
|
VSvcEntry |
|
SEQUENCE |
|
|
|
|
vSvcName |
DisplayString |
|
|
vSvcPorts |
OCTET STRING |
|
|
vSvcIdent |
DisplayString |
|
|
vSvcRating |
INTEGER |
|
|
vSvcLtEnable |
INTEGER |
|
|
vSvcTelEnable |
INTEGER |
|
|
vSvcLprEnable |
INTEGER |
|
|
vSvcRawEnable |
INTEGER |
|
|
vSvcVirtualEnable |
INTEGER |
|
|
vSvcVirtualText |
OCTET STRING |
|
|
vSvcConnectEnable |
INTEGER |
|
|
vSvcPassword |
DisplayString |
|
|
vSvcQueueEnable |
INTEGER |
|
|
vSvcIpAddr |
IpAddress |
|
|
vSvcTcpPort |
INTEGER |
|
|
vSvcProfile |
DisplayString |
|
|
vSvcStatus |
INTEGER |
|
VProfEntry |
|
SEQUENCE |
|
|
|
|
vProfName |
DisplayString |
|
|
vProfDomain |
DisplayString |
|
|
vProfConcatenate |
INTEGER |
|
|
vProfPermHostOnly |
INTEGER |
|
|
vProfTcpPort |
INTEGER |
|
|
vProfTcpTimeout |
INTEGER |
|
|
vProfTcpKeepalive |
INTEGER |
|
|
vProfIpTTL |
INTEGER |
|
|
vProfIpPrecedence |
INTEGER |
|
|
vProfTermType |
DisplayString |
|
|
vProfCrToNet |
OCTET STRING |
|
|
vProfCrFromTerm |
OCTET STRING |
|
|
vProfPadChar |
Character |
|
|
vProfPadLength |
INTEGER |
|
|
vProfEndRecord |
Character |
|
|
vProfNop |
Character |
|
|
vProfDataMark |
Character |
|
|
vProfBreak |
Character |
|
|
vProfIntProcess |
Character |
|
|
vProfAbortOutput |
Character |
|
|
vProfAttention |
Character |
|
|
vProfEraseChar |
Character |
|
|
vProfEraseLine |
Character |
|
|
vProfGoAhead |
Character |
|
|
vProfNullPass |
INTEGER |
|
|
vProfLocalEcho |
INTEGER |
|
|
vProfRemoteEcho |
INTEGER |
|
|
vProfLocalBinary |
INTEGER |
|
|
vProfRemoteBinary |
INTEGER |
|
|
vProfStatus |
INTEGER |
|
VSecEntry |
|
SEQUENCE |
|
|
|
|
vSecIndex |
INTEGER |
|
|
vSecAddress |
IpAddress |
|
|
vSecMask |
IpAddress |
|
|
vSecGroups |
LtGroupList |
|
|
vSecStatus |
INTEGER |
|
VHostEntry |
|
SEQUENCE |
|
|
|
|
vHostHostname |
DisplayString |
|
|
vHostAddress |
IpAddress |
|
|
vHostTTL |
INTEGER |
|
|
vHostStatus |
INTEGER |
|
VNsEntry |
|
SEQUENCE |
|
|
|
|
vNsAddress |
IpAddress |
|
|
vNsHostname |
DisplayString |
|
|
vNsTTL |
TimeTicks |
|
|
vNsStatus |
INTEGER |
|
VTacEntry |
|
SEQUENCE |
|
|
|
|
vTacAddress |
IpAddress |
|
|
vTacHostname |
DisplayString |
|
|
vTacStatus |
INTEGER |
|
VTelSessEntry |
|
SEQUENCE |
|
|
|
|
vTelSessPortIndex |
INTEGER |
|
|
vTelSessIndex |
INTEGER |
|
|
vTelSessOrigin |
INTEGER |
|
|
vTelSessState |
INTEGER |
|
|
vTelSessDisconnect |
INTEGER |
|
|
vTelSessLocalAddr |
IpAddress |
|
|
vTelSessLocalTcpPort |
INTEGER |
|
|
vTelSessRemAddr |
IpAddress |
|
|
vTelSessRemTcpPort |
INTEGER |
|
|
vTelSessCrToNet |
OCTET STRING |
|
|
vTelSessCrFromTerm |
OCTET STRING |
|
|
vTelSessPadChar |
Character |
|
|
vTelSessPadLength |
INTEGER |
|
|
vTelSessUserTimeout |
INTEGER |
|
|
vTelSessKeepalive |
INTEGER |
|
|
vTelSessIpTTL |
INTEGER |
|
|
vTelSessIpPrecedence |
INTEGER |
|
|
vTelSessEndRecord |
Character |
|
|
vTelSessNop |
Character |
|
|
vTelSessDataMark |
Character |
|
|
vTelSessBreak |
Character |
|
|
vTelSessIntProcess |
Character |
|
|
vTelSessAbortOutput |
Character |
|
|
vTelSessAttention |
Character |
|
|
vTelSessEraseChar |
Character |
|
|
vTelSessEraseLine |
Character |
|
|
vTelSessGoAhead |
Character |
|
|
vTelSessNullPass |
INTEGER |
|
|
vTelSessTermType |
DisplayString |
|
|
vTelSessLocalEcho |
INTEGER |
|
|
vTelSessRemoteEcho |
INTEGER |
|
|
vTelSessLocalBinary |
INTEGER |
|
|
vTelSessRemoteBinary |
INTEGER |
|
VRlogSessEntry |
|
SEQUENCE |
|
|
|
|
vRlogSessPortIndex |
INTEGER |
|
|
vRlogSessIndex |
INTEGER |
|
|
vRlogSessOrigin |
INTEGER |
|
|
vRlogSessState |
INTEGER |
|
|
vRlogSessDisconnect |
INTEGER |
|
|
vRlogSessLocalAddr |
IpAddress |
|
|
vRlogSessLocalTcpPort |
INTEGER |
|
|
vRlogSessRemAddr |
IpAddress |
|
|
vRlogSessRemTcpPort |
INTEGER |
|
|
vRlogSessTermType |
DisplayString |
|
VLtSessEntry |
|
SEQUENCE |
|
|
|
|
vLtSessPortIndex |
INTEGER |
|
|
vLtSessIndex |
INTEGER |
|
|
vLtSessOrigin |
INTEGER |
|
|
vLtSessState |
INTEGER |
|
|
vLtSessDisconnect |
INTEGER |
|
|
vLtSessSvcName |
DisplayString |
|
|
vLtSessNodeName |
DisplayString |
|
|
vLtSessDestName |
DisplayString |
|
VQueEntry |
|
SEQUENCE |
|
|
|
|
vQueEntryNumber |
INTEGER |
|
|
vQueSvcName |
DisplayString |
|
|
vQueNodeName |
DisplayString |
|
|
vQuePortName |
DisplayString |
|
|
vQueStatus |
INTEGER |
|
VSnmpTrapDestEntry |
|
SEQUENCE |
|
|
|
|
vSnmpTrapDestAddr |
IpAddress |
|
|
vSnmpTrapDestCommunity |
INTEGER |
|
|
vSnmpTrapDestColdEnable |
INTEGER |
|
|
vSnmpTrapDestAuthEnable |
INTEGER |
|
|
vSnmpTrapDestStatus |
INTEGER |
|
Defined Values
port |
1.3.6.1.4.1.85.1 |
OBJECT IDENTIFIER |
|
|
|
server |
1.3.6.1.4.1.85.2 |
OBJECT IDENTIFIER |
|
|
|
service |
1.3.6.1.4.1.85.3 |
OBJECT IDENTIFIER |
|
|
|
slot |
1.3.6.1.4.1.85.4 |
OBJECT IDENTIFIER |
|
|
|
dssAdmin |
1.3.6.1.4.1.85.5 |
OBJECT IDENTIFIER |
|
|
|
dssMibs |
1.3.6.1.4.1.85.6 |
OBJECT IDENTIFIER |
|
|
|
dssDevice |
1.3.6.1.4.1.85.5.1 |
OBJECT IDENTIFIER |
|
|
|
vcp-1000 |
1.3.6.1.4.1.85.5.1.1 |
OBJECT IDENTIFIER |
|
|
|
vcp-200 |
1.3.6.1.4.1.85.5.1.2 |
OBJECT IDENTIFIER |
|
|
|
vcp-300 |
1.3.6.1.4.1.85.5.1.3 |
OBJECT IDENTIFIER |
|
|
|
dssNone |
1.3.6.1.4.1.85.5.2.1 |
OBJECT IDENTIFIER |
|
|
|
dssTelnet |
1.3.6.1.4.1.85.5.2.2 |
OBJECT IDENTIFIER |
|
|
|
dssRlogin |
1.3.6.1.4.1.85.5.2.3 |
OBJECT IDENTIFIER |
|
|
|
dssLt |
1.3.6.1.4.1.85.5.2.4 |
OBJECT IDENTIFIER |
|
|
|
vcpMib |
1.3.6.1.4.1.85.6.1.1 |
OBJECT IDENTIFIER |
|
|
|
vcpSystem |
1.3.6.1.4.1.85.6.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
vcpPort |
1.3.6.1.4.1.85.6.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
vcpService |
1.3.6.1.4.1.85.6.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
vcpProfile |
1.3.6.1.4.1.85.6.1.1.4 |
OBJECT IDENTIFIER |
|
|
|
vcpTacacs |
1.3.6.1.4.1.85.6.1.1.8 |
OBJECT IDENTIFIER |
|
|
|
vcpIp |
1.3.6.1.4.1.85.6.1.1.9 |
OBJECT IDENTIFIER |
|
|
|
vcpArp |
1.3.6.1.4.1.85.6.1.1.10 |
OBJECT IDENTIFIER |
|
|
|
vcpTcp |
1.3.6.1.4.1.85.6.1.1.11 |
OBJECT IDENTIFIER |
|
|
|
vcpTelnet |
1.3.6.1.4.1.85.6.1.1.12 |
OBJECT IDENTIFIER |
|
|
|
vcpRlogin |
1.3.6.1.4.1.85.6.1.1.13 |
OBJECT IDENTIFIER |
|
|
|
vcpLt |
1.3.6.1.4.1.85.6.1.1.14 |
OBJECT IDENTIFIER |
|
|
|
vcpQueue |
1.3.6.1.4.1.85.6.1.1.15 |
OBJECT IDENTIFIER |
|
|
|
vcpSnmp |
1.3.6.1.4.1.85.6.1.1.16 |
OBJECT IDENTIFIER |
|
|
|
vSysIdentifier |
1.3.6.1.4.1.85.6.1.1.1.1 |
A unique identifier of the server type. The OID is
one of those found under { dssDevice }, such as
{ vcp-1000 }. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
vSysReboot |
1.3.6.1.4.1.85.6.1.1.1.2 |
A control to reinitialize the server. In response to a
get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes the server to reboot. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), execute(2) |
|
vSysLtGroupStatus |
1.3.6.1.4.1.85.6.1.1.1.3 |
An integer indicating whether the vcpLt group is
implemented on this particular unit. That entire group
has a status of optional, as some software configurations
executing in a VCP-type server unit may not implement the
group. For example, the group is not implemented in a
unit which is configured without the Lat-compatible
protocol, and in this case the value of vSysLtGroupStatus
is absent(2). This variable gives management stations an
easy way to determine whether the group is implemented in
the particular unit being managed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
present(1), absent(2) |
|
vSysPrimaryBoot |
1.3.6.1.4.1.85.6.1.1.1.4 |
The primary boot method of the server. This boot method
is attempted first on system re-initialization. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rom(1), mop(2), bootp(3), tftp(4), card(5) |
|
vSysSecondaryBoot |
1.3.6.1.4.1.85.6.1.1.1.5 |
The secondary boot method of the server. This boot
method is attempted on system re-initialization when the
primary boot method fails. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rom(1), mop(2), bootp(3), tftp(4), card(5), none(6) |
|
vSysBootFilePath |
1.3.6.1.4.1.85.6.1.1.1.6 |
The pathname on the remote boot host of the server's
boot file for boot through TFTP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vSysBootFileName |
1.3.6.1.4.1.85.6.1.1.1.7 |
The filename of the server's boot file for boot through
MOP, TFTP, or Card. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..9) |
|
vSysBootServer |
1.3.6.1.4.1.85.6.1.1.1.8 |
The IP address of the boot server for boot through
TFTP or BOOTP. A value of '0.0.0.0' (on read or write)
indicates that no boot server is defined. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vSysRemoteBoot |
1.3.6.1.4.1.85.6.1.1.1.9 |
Indicates whether this server will supply system
software as a boot image for remote VCP servers when they
request a network boot. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSysEtherType |
1.3.6.1.4.1.85.6.1.1.1.10 |
Selects the operating ethernet interface.
'autoSelect(1)' indicates that the server will
automatically select an interface by identifying that
interface showing network activity. Note that the
server must be rebooted before a change in the value of
this variable actually takes effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
autoSelect(1), thinWire(2), thickWire(3), tenBaseT(4) |
|
vSysBroadband |
1.3.6.1.4.1.85.6.1.1.1.11 |
Determines whether or not the server is configured to
interface with with broadband network tranceivers. Note
that the server must be rebooted before a change in the
value of this variable actually takes effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSysPasswordLimit |
1.3.6.1.4.1.85.6.1.1.1.12 |
Determines the number of times the server will allow a
user to mistype a local password, either to login to
a port or connect to a local service, before refusing
the login attempt. The value 0 indicates infinite
password attempts. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..250 |
|
vSysPrivPassword |
1.3.6.1.4.1.85.6.1.1.1.13 |
The password required for users to enter privileged
mode, and have access to privileged commands. Note that
on a set-request, the new value is automatically
converted to upper-case, as is the user password input. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..6) |
|
vSysMaintenancePassword |
1.3.6.1.4.1.85.6.1.1.1.14 |
The password required for access to the server remote
console port through the MOP network protocol. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
vPortBroadcast |
1.3.6.1.4.1.85.6.1.1.2.1 |
Determines whether or not port users may broadcast
text directly to other ports, using the local
'BROADCAST' command. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortInactivityTimer |
1.3.6.1.4.1.85.6.1.1.2.2 |
The number of minutes that may pass with no port
activity before that port is automatically logged out,
if the port's inactivity logout feature is enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..120 |
|
vPortAbsoluteTimer |
1.3.6.1.4.1.85.6.1.1.2.3 |
The number of minutes that may pass with no port
activity before that port is automatically logged out,
if the port's absolute logout feature is enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..1439 |
|
vPortLock |
1.3.6.1.4.1.85.6.1.1.2.4 |
Determines whether or not the server will allow a user
to lock a port using the local 'LOCK' command. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortLoginPassword |
1.3.6.1.4.1.85.6.1.1.2.5 |
The password required for users to login ports with
vPortPasswordEnable = 'enabled(1)'. On a set-request
the agent converts lower case ASCII characters to upper
case for this object, because the user's password input
is also converted before comparison. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..6) |
|
vPortConsoleIndex |
1.3.6.1.4.1.85.6.1.1.2.6 |
The value of vPortIndex for the port which is serving
as the local console port. Abnormal event messages are
automatically directed to the local console port. A
value of 0 indicates that console messages are disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vPortFailover |
1.3.6.1.4.1.85.6.1.1.2.7 |
Determines whether or not the port failover feature is
enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortSignalCheck |
1.3.6.1.4.1.85.6.1.1.2.8 |
Determines whether or not the port signal check
feature can be enabled for individual ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortLoginMsgEnable |
1.3.6.1.4.1.85.6.1.1.2.9 |
Determines whether or not the server prints an
introductory login message to the user when the user
completes a login to a port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortBreakDuration |
1.3.6.1.4.1.85.6.1.1.2.10 |
Determines the length, in milliseconds, of a BREAK
when transmitted from a physical port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..200 |
|
vPortXoffMark |
1.3.6.1.4.1.85.6.1.1.2.11 |
Determines the number of free bytes in a port input
buffer at which point the port will XOFF the attached
device. When set, the new value will not take effect
until the server is re-initialized. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..510 |
|
vPortXonMark |
1.3.6.1.4.1.85.6.1.1.2.12 |
Determines the number of used bytes in a port input
buffer at which point the port will XON the attached
device. When set, the new value will not take effect
until the server is re-initialized. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..510 |
|
vPortNumber |
1.3.6.1.4.1.85.6.1.1.2.13 |
An integer indicating the number of entries in
vPortTable. This value cannot change from one
re-initialization of the unit to the next
re-initialization. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vPortTable |
1.3.6.1.4.1.85.6.1.1.2.14 |
A list of port entries. The number of entries is given
by the value of vPortNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VPortEntry |
|
vPortEntry |
1.3.6.1.4.1.85.6.1.1.2.14.1 |
Status and parameter values for a port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VPortEntry |
|
|
vPortIndex |
1.3.6.1.4.1.85.6.1.1.2.14.1.1 |
A unique value for each port. Its value ranges between
1 and the value of vPortNumber. The value for each port
will remain constant at least from one re-initialization
of the unit's network management system to the next
re-initialization. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vPortType |
1.3.6.1.4.1.85.6.1.1.2.14.1.2 |
An integer indicating the type of the port. Virtual
ports should be considered communication channels to
their particular interface. For example, a virtualX25(7)
port is a channel to an X.25 interface for establishing
connections to/from that interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), physicalRS-232(2), physicalRS-423(3), physicalModem(4), physicalLCDPanel(5), virtualConsole(6), virtualNPT(7), virtualX25(8), virtual3270(9) |
|
vPortName |
1.3.6.1.4.1.85.6.1.1.2.14.1.3 |
A textual name for the port. This name is used in
LAT-compatible session start requests, where a device can
request to be connected to a port with a given name. On
a set-request the agent converts lower case ASCII
characters to upper case for this object. Note that for
ports with vPortType = 'physicalLCDPanel(5)' or vPortType
= 'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
vPortUserName |
1.3.6.1.4.1.85.6.1.1.2.14.1.4 |
The textual username typed in by the user who logged
into the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vPortState |
1.3.6.1.4.1.85.6.1.1.2.14.1.5 |
The current operational state of the port. 'idle(2)'
indicates that the port has no sessions and is logged
out. 'local(3)' indicates that the port is currently
in local server mode, although suspended sessions may
exist on the port. 'connecting(4)' indicates that the
server is attempting to connect the port to a session.
'connected(5) indicates that the port is currently
connected to a protocol session. 'locked(6)' indicates
that the port has been locked by a local LOCK command and
is awaiting the unlock password. 'serial-interface(7)'
indicates that the port is acting as an interface for
a serial link controlled by SLIP, PPP, etc. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), idle(2), local(3), connecting(4), connected(5), locked(6), serial-interface(7) |
|
vPortLogout |
1.3.6.1.4.1.85.6.1.1.2.14.1.6 |
A control to logout a port. In response to a
get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes all sessions on the port to be
disconnected and the port is returned to idle state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), execute(2) |
|
vPortActiveSessions |
1.3.6.1.4.1.85.6.1.1.2.14.1.7 |
The number of presently active sessions on the port,
whether current or suspended. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vPortCurrSessNumber |
1.3.6.1.4.1.85.6.1.1.2.14.1.8 |
The reference number of the port's current session.
There is a unique non-zero reference number for each
session on a port. The reference number stays constant
for the life of the session. It can be used in
conjunction with vPortIndex to index into the appropriate
session table for retrieval of session information
(vTelSessTable, vLtSessTable, or vRlogSessTable). If
there are no sessions on the port, or if none of them is
current, this object will have the value 0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vPortCurrSessProt |
1.3.6.1.4.1.85.6.1.1.2.14.1.9 |
An identifier of which higher-level protocol the current
port session is running over. The possibilities are
{ dssNone } (for no current session, or unknown),
{ dssTelnet }, { dssRlogin }, or { dssLt }. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
vPortAccess |
1.3.6.1.4.1.85.6.1.1.2.14.1.10 |
An indication of the allowed types of access to the
port. 'local(1)' indicates that the port can only carry
sessions initiated by it. 'remote(2)' indicates that the
port can only accept connections initiated by another
entity. 'dynamic(3)' indicates that the port can both
initiate sessions and accept connections initiated by
another entity. 'none(4)' indicates that the port can
not pass any characters, and can neither initiate nor
accept connections. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local(1), remote(2), dynamic(3), none(4) |
|
vPortVirtualEnable |
1.3.6.1.4.1.85.6.1.1.2.14.1.11 |
An indication of the current setting of the port's
virtual characteristic. This parameter affects the
port's actions when connections are established. Refer
to the user manual for a complete description of this
parameter. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortVirtualString |
1.3.6.1.4.1.85.6.1.1.2.14.1.12 |
An indication of the current setting of the port's
virtual text string. This parameter affects the
port's actions when connections are established. Refer
to the user manual for a complete description of this
parameter. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..112) |
|
vPortSessionLimit |
1.3.6.1.4.1.85.6.1.1.2.14.1.13 |
The maximum number of simultaneous sessions allowed on
the port. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept
any valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..10 |
|
vPortProfile |
1.3.6.1.4.1.85.6.1.1.2.14.1.14 |
The name of the profile in use for the port. The
profile contains session parameter information for Telnet
and Rlogin. When the port initiates a Telnet or Rlogin
session, the parameters to be used for that session are
taken from the port's profile. vPortProfilename can be
used to index into the profile table and retrieve/modify
the relevant parameters. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vPortQueueing |
1.3.6.1.4.1.85.6.1.1.2.14.1.15 |
An indication of whether the LAT-compatible protocol
will request session queueing when attempting to
establish a session initiated at this port. If queueing
is requested, a remote node will queue the connection
request in the case of resource failures and accept the
session when it is able. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortPasswordEnable |
1.3.6.1.4.1.85.6.1.1.2.14.1.16 |
An indication of whether the system password must be
entered to login to the port. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortTacacsEnable |
1.3.6.1.4.1.85.6.1.1.2.14.1.17 |
An indication of whether the username and password
entered at login must be verified by a Tacacs server
before port access is permitted. Note for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortSecurityEnable |
1.3.6.1.4.1.85.6.1.1.2.14.1.18 |
An indication of whether the port security feature
is enabled. Ports for which security is enabled are
allowed to execute only a limited subset of the
available local commands. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortGroups |
1.3.6.1.4.1.85.6.1.1.2.14.1.19 |
Indicates which LAT-compatible groups are authorized
and currently enabled on the port. There are 256
possible LAT-compatible groups (0-255). Note that for
ports with vPortType = 'physicalLCDPanel(5)' or vPortType
= 'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
LtGroupList |
|
|
vPortBreakMode |
1.3.6.1.4.1.85.6.1.1.2.14.1.20 |
An indication of how a BREAK is interpreted when
received at the port as input. 'local(1)' indicates that
a received BREAK causes any current session to be
suspended and the port returned to local mode. If there
is no current session, the BREAK causes any port output
in progress to be aborted. 'remote(2)' indicates that a
received BREAK is passed through the current session to
the other side via a protocol-specific mechanism. If
there is no current session, the BREAK causes any port
output in progress to be aborted. 'disabled(3)'
indicates that all received BREAKs are ignored. Note
that for ports with vPortType = 'physicalLCDPanel(5)' or
vPortType = 'virtualConsole(6)' this object is not
modifiable. The agent will accept any valid value on
a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local(1), remote(2), disabled(3) |
|
vPortBackSwitch |
1.3.6.1.4.1.85.6.1.1.2.14.1.21 |
A 'hot' key which, when received at the port's input,
causes the current session to be changed to the
immediately preceding session (from session 3 to session
2, for example). A value of 0 means that no backwards
switch is in effect. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept
any valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vPortForwSwitch |
1.3.6.1.4.1.85.6.1.1.2.14.1.22 |
A 'hot' key which, when received at the port's input,
causes the current session to be changed to the
next numerical session (from session 3 to session
4, for example). A value of 0 means that no forwards
switch is in effect. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept
any valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vPortLocalSwitch |
1.3.6.1.4.1.85.6.1.1.2.14.1.23 |
A 'hot' key which, when received at the port's input,
forces the port to suspend any current session and return
to local mode. If no current session exists, any port
output currently in progress is aborted. A value of 0
means that no local switch is in effect. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vPortPrefSvc |
1.3.6.1.4.1.85.6.1.1.2.14.1.24 |
A string defining the port's preferred service. A user
at the port does not need to specify the service name (or
node address) to connect to the service, he simply
executes the connect command. Alternately, the port may
connect to this service immediately upon being logged in
from an idle state. The exact mode of operation depends
on the setting of vPortPrefMode. A zero-length value for
this object means that no preferred service is in
effect. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vPortPrefNode |
1.3.6.1.4.1.85.6.1.1.2.14.1.25 |
A string defining the node name for the port's preferred
service. Multiple LAT-compatible nodes may offer the
same service name. This object defines which node is the
preferred choice for the port. A zero-length value for
this object means that no preferred node is in effect.
Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vPortPrefPort |
1.3.6.1.4.1.85.6.1.1.2.14.1.26 |
A string defining the port name for the port's preferred
service. For LAT-compatible services this string
identifies the LAT-compatible port name of the desired
destination. For IP hosts this string defines the
desired TCP port number. A zero-length value means that
no preferred port is in effect. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vPortPrefMode |
1.3.6.1.4.1.85.6.1.1.2.14.1.27 |
An indication of the mode of preferred service
connection. 'preferred(2)' indicates the 'preferred'
mode of connection. In this mode users may break back to
local mode by means of the BREAK key or a defined local
switch. 'dedicated(3)' indicates that the port cannot
function in local mode at all. It is dedicated to the
specified service. Once the service connection is
broken, the port is logged out. When the port is logged
in, it immediately connects to the dedicated service.
Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dedicated(1), preferred(2) |
|
vPortAutoConnect |
1.3.6.1.4.1.85.6.1.1.2.14.1.28 |
A port characteristic which, when enabled, causes the
port to automatically attempt to re-establish any
connection which is abnormally terminated, such as by
network media failure. If a preferred service is also
defined, the port will automatically attempt connection
to the preferred service upon login. Note for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortPrompt |
1.3.6.1.4.1.85.6.1.1.2.14.1.29 |
The prompt string for the port when it is in local
mode. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..11) |
|
vPortInactiveLogout |
1.3.6.1.4.1.85.6.1.1.2.14.1.30 |
A port characteristic which, when enabled, causes the
port to automatically become logged out if it has no
active sessions and no data has been received or
transmitted at the port for the duration of the
vSysInactivityTimer. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortAutoPrompt |
1.3.6.1.4.1.85.6.1.1.2.14.1.31 |
A port characteristic which, when enabled, causes the
LAT-compatible service prompt to appear at the port
immediately upon connecting to a LAT-compatible service.
Many LAT-compatible services do not supply a prompt until
a carriage return is encountered. Note that for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortBroadcastEnable |
1.3.6.1.4.1.85.6.1.1.2.14.1.32 |
A port characteristic which, when enabled, allows
characters broadcast from other server ports to appear
at the port. If disabled, such broadcasts are not
permitted to the particular port. Note for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortInterrupts |
1.3.6.1.4.1.85.6.1.1.2.14.1.33 |
A port characteristic which, when enabled, allows
a remote connection to the port to be interrupted by a
local user by means of the BREAK key. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortMessageCodes |
1.3.6.1.4.1.85.6.1.1.2.14.1.34 |
A port characteristic which, when enabled, causes
a message code reference number to be generated along
with any port status or error messages. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortVerification |
1.3.6.1.4.1.85.6.1.1.2.14.1.35 |
A port characteristic which, when enabled, causes
a status message to appear on each connection attempt by
the port. The status message indicates success or
failure of the connection and provides the session number
of the newly established session. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortDialup |
1.3.6.1.4.1.85.6.1.1.2.14.1.36 |
A port characteristic which, when enabled, causes the
server to identify that the port is configured for modem
dial-in service when it connects to a LAT-compatible
service. This may cause the service to initiate any
security features it chooses to verify the authority or
source of the connecting user. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortRemoteModify |
1.3.6.1.4.1.85.6.1.1.2.14.1.37 |
A port characteristic which, when enabled, causes the
server to allow modification of local port parameters
(speed, character size, parity, etc.) from the remote
end of the connection through protocol-specific means.
Note for ports with vPortType = 'physicalLCDPanel(5)' or
vPortType = 'virtualConsole(6)' this object is not
modifiable. The agent will accept any valid value on a
set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortAbsoluteLogout |
1.3.6.1.4.1.85.6.1.1.2.14.1.38 |
A port characteristic which, when enabled, causes the
port to automatically become logged out if no data has
been received or transmitted at the port for the duration
of the vSysAbsoluteTimer, regardless of the presence of
suspended sessions on the port. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortIOflush |
1.3.6.1.4.1.85.6.1.1.2.14.1.39 |
A port characteristic which, when enabled, causes the
server to automatically flush the port's output buffer
when the port becomes logged out. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortLogoutMsgEnable |
1.3.6.1.4.1.85.6.1.1.2.14.1.40 |
A port characteristic which, when enabled, causes the
port to print a message whenever it becomes logged out.
Note for ports with vPortType = 'physicalLCDPanel(5)' or
vPortType = 'virtualConsole(6)' this object is not
modifiable. The agent will accept any valid value on a
set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vPortScreenType |
1.3.6.1.4.1.85.6.1.1.2.14.1.41 |
A port characteristic which determines the type of
output device connected to the port, and therefore
determines the output data formatting used for server
configuration and statistics screens. 'ansi(1)'
indicates that ANSI-compatible screen formatting
sequences may be used. 'softcopy(2)' specifies that
VT-100 screen formatting sequences may be used.
'hardcopy(3)' indicates that no screen-formatting
sequences may be used. Note that for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ansi(1), softcopy(2), hardcopy(3) |
|
vPortFlowType |
1.3.6.1.4.1.85.6.1.1.2.14.1.42 |
The port's type of flow control. 'none(1)' indicates
that no flow control is in effect. 'xonXoff(2)'
indicates software flow control by recognizing XON and
XOFF characters. 'hardware(3)' indicates flow control
delegated to the lower level, for example a parallel
port. 'ctsRts(4)' and 'dsrDtr(5)' are specific to ports
with vPortType = 'physicalRS-232(2) or
'physicalRS-423(3)'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), xonXoff(2), hardware(3), ctsRts(4), dsrDtr(5) |
|
vPortInFlowState |
1.3.6.1.4.1.85.6.1.1.2.14.1.43 |
The current operational state of input flow control on
the port. 'none' indicates not applicable. 'unknown'
indicates this level does not know. 'stop' indicates
flow not allowed. 'go' indicates flow allowed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), unknown(2), stop(3), go(4) |
|
vPortOutFlowState |
1.3.6.1.4.1.85.6.1.1.2.14.1.44 |
The current operational state of output flow control on
the port. 'none' indicates not applicable. 'unknown'
indicates this level does not know. 'stop' indicates
flow not allowed. 'go' indicates flow allowed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), unknown(2), stop(3), go(4) |
|
vPortCTSstate |
1.3.6.1.4.1.85.6.1.1.2.14.1.45 |
The current state of the port's CLEAR-TO-SEND input.
'none(1)' indicates that the port has no CTS input.
'unknown(4)' indicates that the state of the input signal
is unavailable to this software level. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), on(2), off(3), unknown(4) |
|
vPortDSRstate |
1.3.6.1.4.1.85.6.1.1.2.14.1.46 |
The current state of the port's DATA-SET-READY input.
'none(1)' indicates that the port has no DSR input.
'unknown(4)' indicates that the state of the input signal
is unavailable to this software level. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), on(2), off(3), unknown(4) |
|
vPortDCDstate |
1.3.6.1.4.1.85.6.1.1.2.14.1.47 |
The current state of the port's DATA-CARRIER-DETECT
input. 'none(1)' indicates that the port has no DCD
input. 'unknown(4)' indicates that the state of the
input signal is unavailable to this software level. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), on(2), off(3), unknown(4) |
|
vPortDTRstate |
1.3.6.1.4.1.85.6.1.1.2.14.1.48 |
The current state of the port's DATA-TERMINAL-READY
output. 'none(1)' indicates that the port has no DTR
output. 'unknown(4)' indicates that the state of the
output signal is unavailable to this software level. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), on(2), off(3), unknown(4) |
|
vPortRIstate |
1.3.6.1.4.1.85.6.1.1.2.14.1.49 |
The current state of the port's RING-INDICATOR
input. 'none(1)' indicates that the port has no RI
input. 'unknown(4)' indicates that the state of the
input signal is unavailable to this software level. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), on(2), off(3), unknown(4) |
|
vPortRTSstate |
1.3.6.1.4.1.85.6.1.1.2.14.1.50 |
The current state of the port's REQUEST-TO-SEND
output. 'none(1)' indicates that the port has no RTS
output. 'unknown(4)' indicates that the state of the
output signal is unavailable to this software level. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), on(2), off(3), unknown(4) |
|
vPortSpeed |
1.3.6.1.4.1.85.6.1.1.2.14.1.51 |
The serial baud rate of the port. 'none(1)' indicates
that the port is not a physical serial port. The agent
will accept any valid value on a set-request for such
ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), baud-110(2), baud-300(3), baud-600(4), baud-1200(5), baud-2400(6), baud-4800(7), baud-9600(8), baud-14400(9), baud-19200(10), baud-28800(11), baud-38400(12), baud-57600(13) |
|
vPortCharSize |
1.3.6.1.4.1.85.6.1.1.2.14.1.52 |
The size of serial characters transmitted/received at
the port, excluding parity and stop bits. 'none(1)'
indicates that the port is not a physical serial port.
The agent will accept any valid value on a set-request
for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), seven-bits(2), eight-bits(3) |
|
vPortParityType |
1.3.6.1.4.1.85.6.1.1.2.14.1.53 |
The type of parity used for serial transmission and
reception of characters at the port. 'not-applicable(1)'
indicates that the port is not a physical serial port.
The agent will accept any valid value on a set-request
for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
not-applicable(1), none(2), even(3), odd(4), mark(5), space(6) |
|
vPortAutobaud |
1.3.6.1.4.1.85.6.1.1.2.14.1.54 |
Indicates whether the port will automatically attempt
to autobaud to an external serial device after being
logged out. 'not-applicable(3)' indicates that the port
is not a physical serial port. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), not-applicable(3) |
|
vPortModemControl |
1.3.6.1.4.1.85.6.1.1.2.14.1.55 |
Indicates whether the port modem control characteristic
is enabled. When enabled, a physical serial port will
not function unless modem signals are asserted, and the
port's DTR output is dropped for 5 seconds each time the
port gets logged out. 'not-applicable(3)' indicates that
the port is not a physical serial port. The agent will
accept any valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), not-applicable(3) |
|
vPortDSRlogout |
1.3.6.1.4.1.85.6.1.1.2.14.1.56 |
Indicates whether the port DSRlogout characteristic
is enabled. When enabled, a physical serial port will
automatically be logged out when the DSR input is
dropped. 'not-applicable(3)' indicates that the port is
not a physical serial port. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), not-applicable(3) |
|
vPortRing |
1.3.6.1.4.1.85.6.1.1.2.14.1.57 |
Indicates whether the port ring characteristic is
enabled. When enabled, a physical serial port will
raise and lower its RTS output and wait for the DSR input
to be raised before accepting a remote connection
request. 'not-applicable(3)' indicates that the port is
not a physical serial port. The agent will accept any
valid value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), not-applicable(3) |
|
vPortDTRwait |
1.3.6.1.4.1.85.6.1.1.2.14.1.58 |
Indicates whether the port DTRwait characteristic is
enabled. When enabled, a physical serial port will
delay asserting its DTR and RTS outputs until the RI
input signal is asserted. 'not-applicable(3)' indicates
that the port is not a physical serial port. The agent
will accept any valid value on a set-request for such
ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), not-applicable(3) |
|
vPortSignalCheckEnable |
1.3.6.1.4.1.85.6.1.1.2.14.1.59 |
Indicates whether the port signal check characteristic
is enabled. When enabled, a physical serial port will
check for the assertion of the DSR input signal before
accepting a remote connection request.
'not-applicable(3)' indicates that the port is not a
physical serial port. The agent will accept any valid
value on a set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), not-applicable(3) |
|
vPortHandshake |
1.3.6.1.4.1.85.6.1.1.2.14.1.60 |
On some server units the physical serial ports have
connectors which do not allow both the CTS and RI
input signals. This object indicates how the input
signal is to be interpreted. 'not-applicable(3)'
indicates that the port is not a physical serial port, or
that the serial port can accept both the CTS and RI input
signals. The agent will accept any valid value on a
set-request for such ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
signalCTS(1), signalRI(2), not-applicable(3) |
|
vPortRcvChars |
1.3.6.1.4.1.85.6.1.1.2.14.1.61 |
Total number of characters detected as input from
the port since system re-initialization, including
locally-processed input, and input sent to all sessions. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vPortTrnChars |
1.3.6.1.4.1.85.6.1.1.2.14.1.62 |
Total number of characters detected as output from
the port since system re-initialization, including
locally-creating output, and output received from all
sessions. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vPortFrameErrs |
1.3.6.1.4.1.85.6.1.1.2.14.1.63 |
Total number of received characters which were rejected
because a framing error was detected. This counter only
applies to physical serial ports. The value 0 will be
returned for all other ports. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vPortOverrunErrs |
1.3.6.1.4.1.85.6.1.1.2.14.1.64 |
Total number of received characters which were rejected
for lack of character FIFO space on the serial
communication controller. This counter only applies to
physical serial ports. The value 0 will be returned for
all other ports. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vPortParityErrs |
1.3.6.1.4.1.85.6.1.1.2.14.1.65 |
Total number of received characters which were rejected
because a parity error was detected. This counter only
applies to physical serial ports. The value 0 will be
returned for all other ports. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vPortCharsDropped |
1.3.6.1.4.1.85.6.1.1.2.14.1.66 |
Total number of received characters which were rejected
for any reason not covered in other objects, for example
lack of input buffer space. This counter only applies
to physical serial ports. The value 0 will be returned
for all other ports. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vSvcRatingMode |
1.3.6.1.4.1.85.6.1.1.3.1 |
Determines the method of computation for the rating
of local services. 'scaled(2)' indicates that an
algorithm is used where the rating is scaled to be
between 0 and 255. 'unScaled(1)' indicates that the
service rating is equal to the number of available
service ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
scaled(1), unScaled(2) |
|
vSvcCurrNumber |
1.3.6.1.4.1.85.6.1.1.3.2 |
An integer indicating the current number of entries in
vSvcTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vSvcTable |
1.3.6.1.4.1.85.6.1.1.3.3 |
A list of service entries. The number of entries is
given by the value of vSvcCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VSvcEntry |
|
vSvcEntry |
1.3.6.1.4.1.85.6.1.1.3.3.1 |
Status and parameter values for a service. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VSvcEntry |
|
|
vSvcName |
1.3.6.1.4.1.85.6.1.1.3.3.1.1 |
A string which identifies the service uniquely among
all other local services configured in the unit. This
name is transmitted as part of the unit's LAT-compatible
multicast messages. On a set-request the string is
automatically converted to upper-case, as lower-case
service names are not allowed on the server. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
vSvcPorts |
1.3.6.1.4.1.85.6.1.1.3.3.1.2 |
A 32-byte string which represents a bit map of which
server ports are enabled for the service. Each server
port is represented by one bit in the 32 bytes. If the
bit is turned on, the corresponding server port is
enabled for the service. The least significant bit of
each byte represents the lowest of the ports for that
byte. For example, port 1 (port with vPortIndex = 1) is
represented by the least significant bit of the first
byte, and port 16 (port with vPortIndex = 16) is
represented by the most significant bit of the second
byte, etc. Note that 32 bytes allows for up to 256
ports. For servers configured with less than 256 ports,
all bits above the highest port number must always be
zero. Note also that ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
cannot be enabled on a service. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(32) |
|
vSvcIdent |
1.3.6.1.4.1.85.6.1.1.3.3.1.3 |
A locally-administered identification string which is
associated with the service and is transmitted as part of
the unit's LAT-compatible multicast messages. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..40) |
|
vSvcRating |
1.3.6.1.4.1.85.6.1.1.3.3.1.4 |
An integer indicating the ability for connections to
this service to be accepted by the server. The higher
the value, the more able the server is to accept
connections to this service. A very low value indicates
that the resources for this service are close to
exhausted. The most dominant factor for determining the
service rating is the number of idle ports which are
enabled for the service. If a service has no idle ports
enabled, its rating is zero. This number is transmitted
as part of the unit's LAT-compatible multicast messages. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
vSvcLtEnable |
1.3.6.1.4.1.85.6.1.1.3.3.1.5 |
Indicates whether the server will accept connections to
this service over the LAT-compatible protocol.
'disabled(2)' indicates that LAT-compatible connections
will not be accepted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSvcTelEnable |
1.3.6.1.4.1.85.6.1.1.3.3.1.6 |
Indicates whether the server will accept connections to
this service over the Telnet protocol. 'disabled(2)'
indicates that Telnet connections will not be accepted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSvcLprEnable |
1.3.6.1.4.1.85.6.1.1.3.3.1.7 |
Indicates whether the server will accept connections to
this service over the LPR line printer protocol.
'disabled(2)' indicates that LPR connections will not be
accepted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSvcRawEnable |
1.3.6.1.4.1.85.6.1.1.3.3.1.8 |
If enabled(1), indicates that the server will not
interpret Telnet interesting characters when a Telnet
connection is established to the service. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSvcVirtualEnable |
1.3.6.1.4.1.85.6.1.1.3.3.1.9 |
Indicates whether the virtual characteristic is enabled
or not on this service. Refer to the user manual for
more information on the service virtual characteristic. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSvcVirtualText |
1.3.6.1.4.1.85.6.1.1.3.3.1.10 |
Defines the virtual text string for this service. Refer
to the user manual for more information on the function
of the service virtual text string. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..112) |
|
vSvcConnectEnable |
1.3.6.1.4.1.85.6.1.1.3.3.1.11 |
Indicates whether connections are presently being
accepted for this service or not. It is a way of
temporarily turning off the service without deleting it
from the table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSvcPassword |
1.3.6.1.4.1.85.6.1.1.3.3.1.12 |
Defines the password that must be correctly supplied
before a session to this service can be established. a
zero-length value indicates that no password must be
supplied. Note that on a set-request, the new value is
automatically converted to upper-case, as is the user
password input. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..6) |
|
vSvcQueueEnable |
1.3.6.1.4.1.85.6.1.1.3.3.1.13 |
Indicates whether or not the server will queue
connection requests to the service if it is unavailable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSvcIpAddr |
1.3.6.1.4.1.85.6.1.1.3.3.1.14 |
Indicates the only IP address upon which the service
will carry TCP sessions. This is used when the server
has multiple IP addresses and it is desired that the
service only respond to connection requests on one of
those addresses. A value of 0.0.0.0 indicates that any
of the server's IP addresses can be used to connect to
this service. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vSvcTcpPort |
1.3.6.1.4.1.85.6.1.1.3.3.1.15 |
Indicates the TCP port on which this service accepts
TCP connections. A value of zero normally means that
no TCP port has been assigned. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
vSvcProfile |
1.3.6.1.4.1.85.6.1.1.3.3.1.16 |
Indicates the profile entry in the vProfTable which is
used to determine Telnet parameters when a Telnet
connection is accepted to the service. A zero-length
value indicates that only default profile parameter
values will be used. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vSvcStatus |
1.3.6.1.4.1.85.6.1.1.3.3.1.17 |
The current status of this service entry. Setting this
object to the value invalid(2) has the effect of deleting
the entry from the service table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
vProfCurrNumber |
1.3.6.1.4.1.85.6.1.1.4.1 |
An integer indicating the current number of entries in
vProfTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vProfTable |
1.3.6.1.4.1.85.6.1.1.4.2 |
A list of profile entries. The number of entries is
given by the value of vProfCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VProfEntry |
|
vProfEntry |
1.3.6.1.4.1.85.6.1.1.4.2.1 |
Parameter values for a profile entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VProfEntry |
|
|
vProfName |
1.3.6.1.4.1.85.6.1.1.4.2.1.1 |
A unique string value for each profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
vProfDomain |
1.3.6.1.4.1.85.6.1.1.4.2.1.2 |
A domain name extension that may be appended to a
user-specified hostname with which the user wishes to
start a session. For example, if the user's port profile
has a vProfDomain of 'dss.com', and the user attempts to
start a session to the specified host 'pluto,' the server
will first attempt to resolve the hostname 'pluto,' and
if this is unsuccessful it will then attempt to resolve
the hostname 'pluto.dss.com.' This automatic appending
of domain extension is only attempted if the value of
vProfConcatenate is 'enabled(1).' A zero-length value
indicates that no extension is used. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..63) |
|
vProfConcatenate |
1.3.6.1.4.1.85.6.1.1.4.2.1.3 |
An indication of whether the server will append the
value of vProfDomain to a user-specified hostname when
the user wishes to start a session to the host (see
vProfDomain). 'enabled(1)' indicates that the server
will attempt to resolve the concatenated hostname if the
unconcatenated hostname cannot be resolved to an IP
address. 'disabled(2)' indicates that the server will
not attempt the hostname concatenization. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vProfPermHostOnly |
1.3.6.1.4.1.85.6.1.1.4.2.1.4 |
An indication of whether the server will attempt to
resolve a user-specified hostname through the network
nameserver protocol for ports with this profile.
'disabled(1)' indicates that the server will
automatically attempt to resolve an unknown
user-specified hostname. 'enabled(2)' indicates that if
the user-specified hostname is not already in the
hostname table, the server will not attempt to resolve it
through the nameserver protocol. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vProfTcpPort |
1.3.6.1.4.1.85.6.1.1.4.2.1.5 |
The default remote TCP port to which the server will
attempt to connect when a user starts a Telnet/Rlogin
session on a port with this profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
vProfTcpTimeout |
1.3.6.1.4.1.85.6.1.1.4.2.1.6 |
The maximum number of seconds TCP will wait for an
acknowledgement before terminating the session. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
vProfTcpKeepalive |
1.3.6.1.4.1.85.6.1.1.4.2.1.7 |
The number of seconds that the sessions intiated with
this profile may remain idle (no characters transmitted
or recieved) before a TCP keepalive message is generated.
A value of 0 indicates that keepalive messages are never
generated. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
vProfIpTTL |
1.3.6.1.4.1.85.6.1.1.4.2.1.8 |
The value of the IP time to live on packets transmitted
for sessions initiated with this profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
vProfIpPrecedence |
1.3.6.1.4.1.85.6.1.1.4.2.1.9 |
The value of the IP precedence on packets transmitted
for sessions initiated with this profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
vProfTermType |
1.3.6.1.4.1.85.6.1.1.4.2.1.10 |
The terminal type that Telnet/Rlogin will attempt to
negotiate with the remote node for sessions initiated
with this profile. A zero-length value indicates that
no terminal type is negotiated. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
vProfCrToNet |
1.3.6.1.4.1.85.6.1.1.4.2.1.11 |
The character sequence which is sent by Telnet to the
remote node to indicate a carriage return in the data
stream for sessions initiated with this profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
vProfCrFromTerm |
1.3.6.1.4.1.85.6.1.1.4.2.1.12 |
The local character sequence which, when delivered to
Telnet for transmission, is interpreted as a carriage
return and translated to the sequence indicated by
vProfCrToNet for sessions initiated with this profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
vProfPadChar |
1.3.6.1.4.1.85.6.1.1.4.2.1.13 |
The character used by the local Telnet implementation
to pad transmitted data immediately following a carriage
return for sessions initiated with this profile. A value
of 0 indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfPadLength |
1.3.6.1.4.1.85.6.1.1.4.2.1.14 |
The number of pad characters inserted into the data
stream by the local Telnet implementation immediately
following a carriage return for sessions initiated with
this profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
vProfEndRecord |
1.3.6.1.4.1.85.6.1.1.4.2.1.15 |
The local character which, when delivered to Telnet for
transmission, is interpreted as an end-of-record
character and translated to the appropriate Telnet
control function for sessions initiated with this
profile. A value of 255 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfNop |
1.3.6.1.4.1.85.6.1.1.4.2.1.16 |
The local character which, when delivered to Telnet for
transmission, is interpreted as a no-op character and
translated to the appropriate Telnet control function for
sessions initiated with this profile. A value of 255
indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfDataMark |
1.3.6.1.4.1.85.6.1.1.4.2.1.17 |
The local character which, when delivered to Telnet for
transmission, is interpreted as a data mark character and
translated to the appropriate Telnet control function for
sessions initiated with this profile. A value of 255
indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfBreak |
1.3.6.1.4.1.85.6.1.1.4.2.1.18 |
The local character which, when delivered to Telnet for
transmission, is interpreted as a break character and
translated to the appropriate Telnet control function for
sessions initiated with this profile. A value of 255
indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfIntProcess |
1.3.6.1.4.1.85.6.1.1.4.2.1.19 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the interrupt process
character and translated to the appropriate Telnet
control function for sessions initiated with this
profile. A value of 255 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfAbortOutput |
1.3.6.1.4.1.85.6.1.1.4.2.1.20 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the abort output
character and translated to the appropriate Telnet
control function for sessions initiated with this
profile. A value of 255 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfAttention |
1.3.6.1.4.1.85.6.1.1.4.2.1.21 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the attention character
and translated to the appropriate Telnet control
function for sessions initiated with this profile. A
value of 255 indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfEraseChar |
1.3.6.1.4.1.85.6.1.1.4.2.1.22 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the backspace character
and translated to the appropriate Telnet control
function for sessions initiated with this profile. A
value of 255 indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfEraseLine |
1.3.6.1.4.1.85.6.1.1.4.2.1.23 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the erase line character
and translated to the appropriate Telnet control function
for sessions initiated with this profile. A value of 255
indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfGoAhead |
1.3.6.1.4.1.85.6.1.1.4.2.1.24 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the go ahead character
and translated to the appropriate Telnet control function
for sessions initiated with this profile. A value of 255
indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vProfNullPass |
1.3.6.1.4.1.85.6.1.1.4.2.1.25 |
When enabled, null characters received by Telnet
immediately following carriage return characters are
passed through the data stream untouched. When disabled,
these padding null characters are removed from the
received data stream. This applies to sessions initiated
with this profile. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vProfLocalEcho |
1.3.6.1.4.1.85.6.1.1.4.2.1.26 |
Determines how the local Telnet entity negotiates the
local echo option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
attempt(1), refuse(2), allow(3) |
|
vProfRemoteEcho |
1.3.6.1.4.1.85.6.1.1.4.2.1.27 |
Determines how the local Telnet entity negotiates the
remote echo option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
attempt(1), refuse(2), allow(3) |
|
vProfLocalBinary |
1.3.6.1.4.1.85.6.1.1.4.2.1.28 |
Determines how the local Telnet entity negotiates the
local binary option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
attempt(1), refuse(2), allow(3) |
|
vProfRemoteBinary |
1.3.6.1.4.1.85.6.1.1.4.2.1.29 |
Determines how the local Telnet entity negotiates the
remote binary option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
attempt(1), refuse(2), allow(3) |
|
vProfStatus |
1.3.6.1.4.1.85.6.1.1.4.2.1.30 |
The current status of this profile entry. Setting this
object to the value invalid(2) has the effect of deleting
the entry from the profile table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
vSecEnable |
1.3.6.1.4.1.85.6.1.1.5.1 |
Determines whether or not the server's IP security
feature is enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSecCurrNumber |
1.3.6.1.4.1.85.6.1.1.5.2 |
An integer indicating the current number of entries in
vSecTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vSecTable |
1.3.6.1.4.1.85.6.1.1.5.3 |
A list of security entries. The number of entries is
given by the value of vSecCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VSecEntry |
|
vSecEntry |
1.3.6.1.4.1.85.6.1.1.5.3.1 |
Parameter values for a security entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VSecEntry |
|
|
vSecIndex |
1.3.6.1.4.1.85.6.1.1.5.3.1.1 |
A unique value for each security entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..32 |
|
vSecAddress |
1.3.6.1.4.1.85.6.1.1.5.3.1.2 |
The target address of the IP security entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vSecMask |
1.3.6.1.4.1.85.6.1.1.5.3.1.3 |
A mask which is applied to vSecAddress to determine its
significant bits. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vSecGroups |
1.3.6.1.4.1.85.6.1.1.5.3.1.4 |
A set of group numbers which determines which security
entries are in use on which ports. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
LtGroupList |
|
|
vSecStatus |
1.3.6.1.4.1.85.6.1.1.5.3.1.5 |
The current status of this security entry. Setting this
object to the value invalid(2) has the effect of deleting
the entry from the security table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
vHostCurrNumber |
1.3.6.1.4.1.85.6.1.1.6.1 |
An integer indicating the current number of entries in
vHostTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vHostTable |
1.3.6.1.4.1.85.6.1.1.6.2 |
A list of hostname entries. The number of entries is
given by the value of vHostCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VHostEntry |
|
vHostEntry |
1.3.6.1.4.1.85.6.1.1.6.2.1 |
Parameter and status values for a hostname entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VHostEntry |
|
|
vHostHostname |
1.3.6.1.4.1.85.6.1.1.6.2.1.1 |
The hostname of the host. Note that if the value of
vNsAllowLowerCase is 'disabled(2)', then on a set-request
the specified hostname is automatically converted to
upper case. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..64) |
|
vHostAddress |
1.3.6.1.4.1.85.6.1.1.6.2.1.2 |
The IP address of the host. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vHostTTL |
1.3.6.1.4.1.85.6.1.1.6.2.1.3 |
The time to live (in seconds) of this entry in the host
table. If the entry has been dynamically created by the
nameserver protocol, the TTL will be a non-zero value
indicating its remaining lifetime. Upon expiration of
the TTL the entry is automatically deleted from the
table. If the entry was created by a network
administrator, the entry is considered 'permanent' and
the value of its vHostTTL will be 0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vHostStatus |
1.3.6.1.4.1.85.6.1.1.6.2.1.4 |
The desired status of this host entry. Setting this
object to the value 'invalid(2)' indicates that the
entry is desired to be deleted from the host table. Only
permanent entries will be deleted (entries for which the
value of vHostTTL is 0). Dynamic entries are only
deleted upon expiration of their vHostTTL or upon system
re-initialization. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
vNsRequestMode |
1.3.6.1.4.1.85.6.1.1.7.1 |
The current mode of network hostname resolution.
'recursive(1)' indicates that the server sends
recursive-type requests to network nameservers.
'nonRecursive(2)' indicates that the server does not
send recursive-type nameserver requests. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
recursive(1), nonRecursive(2) |
|
vNsAllowLowerCase |
1.3.6.1.4.1.85.6.1.1.7.2 |
Determines whether the nameserver resolver will
automatically convert user-specified hostnames to upper
case before attempting to resolve them. 'disabled(2)'
indicates that automatic conversion to upper case will
take place. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vNsCurrNumber |
1.3.6.1.4.1.85.6.1.1.7.3 |
An integer indicating the current number of entries in
vNsTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vNsTable |
1.3.6.1.4.1.85.6.1.1.7.4 |
A list of nameserver entries. The number of entries is
given by the value of vNsCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VNsEntry |
|
vNsEntry |
1.3.6.1.4.1.85.6.1.1.7.4.1 |
Parameter values for a nameserver entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VNsEntry |
|
|
vNsAddress |
1.3.6.1.4.1.85.6.1.1.7.4.1.1 |
The IP address of the nameserver host. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vNsHostname |
1.3.6.1.4.1.85.6.1.1.7.4.1.2 |
The resolved hostname of the nameserver host A zero-
length value indicates that the hostname is unknown
at the present time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..64) |
|
vNsTTL |
1.3.6.1.4.1.85.6.1.1.7.4.1.3 |
The time to live (in seconds) of this entry in the
nameserver table. If the entry has been dynamically
created by the nameserver protocol, the TTL will be a
non-zero value indicating its remaining lifetime. Upon
expiration of the TTL the entry is automatically deleted
from the table. If the entry was created by a network
administrator, the entry is considered 'permanent' and
the value of its vNsTTL will be 0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vNsStatus |
1.3.6.1.4.1.85.6.1.1.7.4.1.4 |
The status of this nameserver entry. Setting this
object to the value 'invalid(2)' has the effect of
deleting the entry from the nameserver table. Dynamic
entries are also automatically deleted upon expiration of
their vNsTTL or upon system re-initialization. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
vTacServerCurrNumber |
1.3.6.1.4.1.85.6.1.1.8.1 |
An integer indicating the current number of entries in
vTacTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vTacTable |
1.3.6.1.4.1.85.6.1.1.8.2 |
A list of Tacacs server entries. The number of entries
is given by the value of vTacServerCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VTacEntry |
|
vTacEntry |
1.3.6.1.4.1.85.6.1.1.8.2.1 |
Parameter values for a Tacacs server entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VTacEntry |
|
|
vTacAddress |
1.3.6.1.4.1.85.6.1.1.8.2.1.1 |
The IP address of the Tacacs server host. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vTacHostname |
1.3.6.1.4.1.85.6.1.1.8.2.1.2 |
The resolved hostname of the Tacacs server host. If the
hostname is currently unknown, a zero-length value is
returned. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..63) |
|
vTacStatus |
1.3.6.1.4.1.85.6.1.1.8.2.1.3 |
The current status of this Tacacs server entry. Setting
this object to the value invalid(2) has the effect of
deleting the entry from the Tacacs server table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
vIpBcastAddr |
1.3.6.1.4.1.85.6.1.1.9.1 |
The IP address to be used for IP limited broadcasts
originating from this unit. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vIpMaxAddr |
1.3.6.1.4.1.85.6.1.1.9.2 |
An integer indicating the maximum number of IP addresses
that can be simultaneously assigned to this unit,
totaling over all interfaces. Note that the server must
be rebooted before a change in the value of this variable
actually takes effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
8..64 |
|
vIpMaxHostHashEntries |
1.3.6.1.4.1.85.6.1.1.9.3 |
An integer indicating the number of buckets in the host
route hash table. Note that the server must be rebooted
before a change in the value of this variable actually
takes effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
size-11(1), size-13(2), size-17(3), size-19(4), size-23(5), size-29(6), size-31(7), size-37(8), size-41(9), size-43(10), size-47(11), size-49(12), size-53(13), size-59(14), size-61(15), size-67(16) |
|
vIpMaxNetHashEntries |
1.3.6.1.4.1.85.6.1.1.9.4 |
An integer indicating the number of buckets in the
network route hash table. Note that the server must be
rebooted before a change in the value of this variable
actually takes effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
size-11(1), size-13(2), size-17(3), size-19(4), size-23(5), size-29(6), size-31(7), size-37(8), size-41(9), size-43(10), size-47(11), size-49(12), size-53(13), size-59(14), size-61(15), size-67(16) |
|
vIpMaxInterfaces |
1.3.6.1.4.1.85.6.1.1.9.5 |
An integer indicating the maximum number of IP
interfaces of all types that can be configured on the
unit. Note that the server must be rebooted before a
change in the value of this variable actually takes
effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..128 |
|
vIpMaxRoutes |
1.3.6.1.4.1.85.6.1.1.9.6 |
An integer indicating the maximum number of entries in
the unit's route table. Note that the server must be
rebooted before a change in the value of this variable
actually takes effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
16..128 |
|
vArpMaxEntries |
1.3.6.1.4.1.85.6.1.1.10.1 |
An integer indicating the maximum number of entries in
the unit's ARP table. Note that the server must be
rebooted before a change in the value of this variable
actually takes effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
16..128 |
|
vArpRetryTimeout |
1.3.6.1.4.1.85.6.1.1.10.2 |
An integer indicating the number of seconds between
ARP retransmit attempts. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..30 |
|
vArpRetryMax |
1.3.6.1.4.1.85.6.1.1.10.3 |
An integer indicating the maximum number of ARP
retransmit attempts. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..10 |
|
vArpConfirmTimer |
1.3.6.1.4.1.85.6.1.1.10.4 |
An integer indicating the number of seconds between
confirmations of an ARP entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..300 |
|
vArpIdleTimeout |
1.3.6.1.4.1.85.6.1.1.10.5 |
An integer indicating the number of seconds that a
non-permanent ARP entry can go unused before it is
deleted from the table. A non-permanent entry is one
which was entered into the table by the ARP protocol
rather than manually entered by a network administrator. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
60..1800 |
|
vTcpIpPrecedence |
1.3.6.1.4.1.85.6.1.1.11.1 |
An integer indicating the value of the IP precedence
that the TCP layer will request. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
vTcpSendQSize |
1.3.6.1.4.1.85.6.1.1.11.2 |
An integer indicating the maximum number of data bytes
that will be queued for transmission by the TCP protocol
layer. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
128..8192 |
|
vTcpRcvWinSize |
1.3.6.1.4.1.85.6.1.1.11.3 |
An integer indicating the TCP receive window size in
bytes. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
128..8192 |
|
vTcpSegSize |
1.3.6.1.4.1.85.6.1.1.11.4 |
An integer indicating the TCP segment size in bytes. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
64..511 |
|
vTcpTimerInterval |
1.3.6.1.4.1.85.6.1.1.11.5 |
An integer indicating the resolution (in 1/100 s) of all
timer values used by TCP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..200 |
|
vTcpChecksumEnable |
1.3.6.1.4.1.85.6.1.1.11.6 |
An integer indicating whether TCP checksums are enabled
for all TCP connections. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vTelCourierEnable |
1.3.6.1.4.1.85.6.1.1.12.1 |
Determines whether or not the Telnet courier feature is
enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vTelCourierText |
1.3.6.1.4.1.85.6.1.1.12.2 |
Defines the text which is tranmsitted for the Telnet
courier feature. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
vTelSessCurrNumber |
1.3.6.1.4.1.85.6.1.1.12.3 |
An integer indicating the current number of entries in
vTelSessTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vTelSessTable |
1.3.6.1.4.1.85.6.1.1.12.4 |
A list of Telnet session entries. The number of entries
is given by the value of vTelSessCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VTelSessEntry |
|
vTelSessEntry |
1.3.6.1.4.1.85.6.1.1.12.4.1 |
Parameter and status values for a Telnet session entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VTelSessEntry |
|
|
vTelSessPortIndex |
1.3.6.1.4.1.85.6.1.1.12.4.1.1 |
The value of vPortIndex for the port to which this
session belongs. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vTelSessIndex |
1.3.6.1.4.1.85.6.1.1.12.4.1.2 |
The session index in the context of the port, a
non-zero positive integer. Session indexes within a
port need not be sequential. Session indexes may be
reused for different ports. For example, port 1 and
port 3 may both have a session 2 at the same time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vTelSessOrigin |
1.3.6.1.4.1.85.6.1.1.12.4.1.3 |
The session's source of establishment. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), network(2), local(3) |
|
vTelSessState |
1.3.6.1.4.1.85.6.1.1.12.4.1.4 |
The current state of the session. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
starting(1), running(2), stopping(3) |
|
vTelSessDisconnect |
1.3.6.1.4.1.85.6.1.1.12.4.1.5 |
A control to terminate the session. In response to
a get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes termination. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), execute(2) |
|
vTelSessLocalAddr |
1.3.6.1.4.1.85.6.1.1.12.4.1.6 |
The local IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vTelSessLocalTcpPort |
1.3.6.1.4.1.85.6.1.1.12.4.1.7 |
The local TCP port number for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
vTelSessRemAddr |
1.3.6.1.4.1.85.6.1.1.12.4.1.8 |
The remote IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vTelSessRemTcpPort |
1.3.6.1.4.1.85.6.1.1.12.4.1.9 |
The remote TCP port number for this session. This
object supplies part of the necessary index information
to locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
vTelSessCrToNet |
1.3.6.1.4.1.85.6.1.1.12.4.1.10 |
The character sequence which is sent to the remote node
of the session to indicate a carriage return in the data
stream. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
vTelSessCrFromTerm |
1.3.6.1.4.1.85.6.1.1.12.4.1.11 |
The local character sequence which, when delivered to
Telnet for transmission, is interpreted as a carriage
return and translated to the sequence indicated by
vTelSessCrToNet. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
vTelSessPadChar |
1.3.6.1.4.1.85.6.1.1.12.4.1.12 |
The character used by the local Telnet implementation
to pad transmitted data immediately following a carriage
return. A value of 0 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessPadLength |
1.3.6.1.4.1.85.6.1.1.12.4.1.13 |
The number of pad characters inserted into the data
stream by the local Telnet implementation immediately
following a carriage return. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
vTelSessUserTimeout |
1.3.6.1.4.1.85.6.1.1.12.4.1.14 |
The maximum number of seconds Telnet instructs TCP to
wait for an acknowledgement before terminating the
session. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
vTelSessKeepalive |
1.3.6.1.4.1.85.6.1.1.12.4.1.15 |
The number of seconds that the session may remain idle
(no characters transmitted or recieved) before a TCP
keepalive message is generated. A value of 0 indicates
that keepalive messages are never generated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
vTelSessIpTTL |
1.3.6.1.4.1.85.6.1.1.12.4.1.16 |
The value of the IP time to live on packets transmitted
for this session. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
vTelSessIpPrecedence |
1.3.6.1.4.1.85.6.1.1.12.4.1.17 |
The value of the IP precedence on packets transmitted
for this session. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
vTelSessEndRecord |
1.3.6.1.4.1.85.6.1.1.12.4.1.18 |
The local character which, when delivered to Telnet for
transmission, is interpreted as an end-of-record
character and translated to the appropriate Telnet
control function. A value of 255 indicates that the
character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessNop |
1.3.6.1.4.1.85.6.1.1.12.4.1.19 |
The local character which, when delivered to Telnet for
transmission, is interpreted as a no-op character and
translated to the appropriate Telnet control function. A
value of 255 indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessDataMark |
1.3.6.1.4.1.85.6.1.1.12.4.1.20 |
The local character which, when delivered to Telnet for
transmission, is interpreted as a data mark character and
translated to the appropriate Telnet control function. A
value of 255 indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessBreak |
1.3.6.1.4.1.85.6.1.1.12.4.1.21 |
The local character which, when delivered to Telnet for
transmission, is interpreted as a break character and
translated to the appropriate Telnet control function. A
value of 255 indicates that the character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessIntProcess |
1.3.6.1.4.1.85.6.1.1.12.4.1.22 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the interrupt process
character and translated to the appropriate Telnet
control function. A value of 255 indicates that the
character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessAbortOutput |
1.3.6.1.4.1.85.6.1.1.12.4.1.23 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the abort output
character and translated to the appropriate Telnet
control function. A value of 255 indicates that the
character is disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessAttention |
1.3.6.1.4.1.85.6.1.1.12.4.1.24 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the attention character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessEraseChar |
1.3.6.1.4.1.85.6.1.1.12.4.1.25 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the backspace character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessEraseLine |
1.3.6.1.4.1.85.6.1.1.12.4.1.26 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the erase line character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessGoAhead |
1.3.6.1.4.1.85.6.1.1.12.4.1.27 |
The local character which, when delivered to Telnet for
transmission, is interpreted as the go ahead character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Character |
|
|
vTelSessNullPass |
1.3.6.1.4.1.85.6.1.1.12.4.1.28 |
When enabled, null characters received by Telnet
immediately following carriage return characters are
passed through the data stream untouched. When disabled,
these padding null characters are removed from the
received data stream. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vTelSessTermType |
1.3.6.1.4.1.85.6.1.1.12.4.1.29 |
A text string indicating the currently negotiated
terminal type for the session. A zero-length value
indicates no terminal type has been negotiated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
vTelSessLocalEcho |
1.3.6.1.4.1.85.6.1.1.12.4.1.30 |
When enabled, the local Telnet will perform local
echoing of all data delivered to it for transmission. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vTelSessRemoteEcho |
1.3.6.1.4.1.85.6.1.1.12.4.1.31 |
When enabled, the remote Telnet will perform echoing of
all received network data. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vTelSessLocalBinary |
1.3.6.1.4.1.85.6.1.1.12.4.1.32 |
When enabled, the local Telnet will transmit data in
binary mode. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vTelSessRemoteBinary |
1.3.6.1.4.1.85.6.1.1.12.4.1.33 |
When enabled, the remote Telnet will transmit data in
binary mode. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vRlogSessCurrNumber |
1.3.6.1.4.1.85.6.1.1.13.1 |
An integer indicating the current number of entries in
vRlogSessTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vRlogSessTable |
1.3.6.1.4.1.85.6.1.1.13.2 |
A list of Rlogin session entries. The number of entries
is given by the value of vRlogSessCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VRlogSessEntry |
|
vRlogSessEntry |
1.3.6.1.4.1.85.6.1.1.13.2.1 |
Parameter and status values for a Rlogin session entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRlogSessEntry |
|
|
vRlogSessPortIndex |
1.3.6.1.4.1.85.6.1.1.13.2.1.1 |
The value of vPortIndex for the port to which this
session belongs. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vRlogSessIndex |
1.3.6.1.4.1.85.6.1.1.13.2.1.2 |
The session index in the context of the port, a
non-zero positive integer. Session indexes within a
port need not be sequential. Session indexes may be
reused for different ports. For example, port 1 and
port 3 may both have a session 2 at the same time. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vRlogSessOrigin |
1.3.6.1.4.1.85.6.1.1.13.2.1.3 |
The session's source of establishment. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), network(2), local(3) |
|
vRlogSessState |
1.3.6.1.4.1.85.6.1.1.13.2.1.4 |
The current state of the session. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
starting(1), running(2), stopping(3) |
|
vRlogSessDisconnect |
1.3.6.1.4.1.85.6.1.1.13.2.1.5 |
A control to terminate the session. In response to
a get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes termination. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), execute(2) |
|
vRlogSessLocalAddr |
1.3.6.1.4.1.85.6.1.1.13.2.1.6 |
The local IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vRlogSessLocalTcpPort |
1.3.6.1.4.1.85.6.1.1.13.2.1.7 |
The local TCP port number for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
vRlogSessRemAddr |
1.3.6.1.4.1.85.6.1.1.13.2.1.8 |
The remote IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vRlogSessRemTcpPort |
1.3.6.1.4.1.85.6.1.1.13.2.1.9 |
The remote TCP port number for this session. This
object supplies part of the necessary index information
to locate the corresponding session in the MIB II
TcpConnTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
vRlogSessTermType |
1.3.6.1.4.1.85.6.1.1.13.2.1.10 |
A text string indicating the currently negotiated
terminal type for the session. A zero-length value
indicates no terminal type has been negotiated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
vLtNodeName |
1.3.6.1.4.1.85.6.1.1.14.1 |
The LAT-compatible node name for this unit. This name
is transmitted as part of the node's LAT-compatible
multicast messages. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
vLtNodeID |
1.3.6.1.4.1.85.6.1.1.14.2 |
The LAT-compatible identification string for this
server. This string is transmitted as part of the
agent's LAT-compatible multicast messages. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..40) |
|
vLtNodeGroups |
1.3.6.1.4.1.85.6.1.1.14.3 |
A bit string indicating the LAT-compatible groups which
are transmitted as part of the node's LAT-compatible
multicast messages. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
LtGroupList |
|
|
vLtNumber |
1.3.6.1.4.1.85.6.1.1.14.4 |
An integer indicating the LAT-compatible number that is
tranmsitted as part of the node's LAT-compatible
multicast messages. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
vLtMcastEnable |
1.3.6.1.4.1.85.6.1.1.14.5 |
An integer indicating whether the unit's LAT-compatible
periodic multicast is enabled or not. If enabled, the
unit will transmit one LAT-compatible multicast message
every vLtMcastTimer seconds if it has any local services
to announce. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vLtMcastTimer |
1.3.6.1.4.1.85.6.1.1.14.6 |
An integer indicating the unit's multicast timer value
in seconds. If multicasts are enabled, the unit will
transmit one LAT-compatible multicast message every
vLtMcastTimer seconds if it has any local services to
announce. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..180 |
|
vLtCktTimer |
1.3.6.1.4.1.85.6.1.1.14.7 |
An integer indicating the unit's circuit timer value in
milliseconds. For circuits on which the unit is the
master, circuit data is collected for transmission once
every circuit timer interval. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..200 |
|
vLtKeepaliveTimer |
1.3.6.1.4.1.85.6.1.1.14.8 |
An integer indicating the unit's keepalive timer value
in seconds. For circuits on which the unit is the
master, a keepalive message is transmitted once every
keepalive timer interval if the circuit is otherwise
idle. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..180 |
|
vLtMaxRetran |
1.3.6.1.4.1.85.6.1.1.14.9 |
An integer indicating the maximum number of times the
unit will attempt to retransmit LAT-compatible messages. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..120 |
|
vLtSlotPerCkt |
1.3.6.1.4.1.85.6.1.1.14.10 |
An integer indicating the maximum number of slots per
circuit that the unit can support. This effectively
limits the number of sessions the unit can maintain with
any other node on a single circuit. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
vLtMaxNodes |
1.3.6.1.4.1.85.6.1.1.14.11 |
An integer indicating the maximum number of
LAT-compatible nodes about which the unit will maintain
information necessary for session establishment. When
the unit receives LAT-compatible multicasts, it enters
the pertinent information into its internal node table.
This object indicates the maximum number of entries in
the node table. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
16..1024 |
|
vLtMaxSvcs |
1.3.6.1.4.1.85.6.1.1.14.12 |
An integer indicating the maximum number of
LAT-compatible services about which the unit will
maintain information necessary for session establishment.
When the unit receives LAT-compatible multicasts, it
enters the pertinent information into its internal
service table. This object indicates the size of the
service table. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
16..2048 |
|
vLtMaxCkts |
1.3.6.1.4.1.85.6.1.1.14.13 |
An integer indicating the maximum number of simultaneous
active LAT-compatible circuits. In effect this object
governs the maximum number of LAT-compatible nodes with
which the unit can maintain simultaneous connections. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..128 |
|
vLtSessCurrNumber |
1.3.6.1.4.1.85.6.1.1.14.14 |
An integer indicating the current number of entries in
vLtSessTable. This object is not constant. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vLtSessTable |
1.3.6.1.4.1.85.6.1.1.14.15 |
A list of LAT-compatible session entries. The number of
entries is given by the value of vLtSessCurrNumber. |
Status: optional |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VLtSessEntry |
|
vLtSessEntry |
1.3.6.1.4.1.85.6.1.1.14.15.1 |
Parameter and status values for a LAT-compatible session
entry. |
Status: optional |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VLtSessEntry |
|
|
vLtSessPortIndex |
1.3.6.1.4.1.85.6.1.1.14.15.1.1 |
The value of vPortIndex for the port to which this
session belongs. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vLtSessIndex |
1.3.6.1.4.1.85.6.1.1.14.15.1.2 |
The session index in the context of the port, a
non-zero positive integer. Session indexes within a
port need not be sequential. Session indexes may be
reused for different ports. For example, port 1 and
port 3 may both have a session 2 at the same time. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vLtSessOrigin |
1.3.6.1.4.1.85.6.1.1.14.15.1.3 |
The session's source of establishment. 'network(2)'
indicates that a remote node has started this session.
'local(3)' indicates that the session was started by the
agent port given by vLtSessPortIndex. 'remote-port(4)'
indicates that the session is local between two server
ports, and the port given by vLtSessPortIndex was not
the initiator of the session. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), network(2), local(3), remote-port(4) |
|
vLtSessState |
1.3.6.1.4.1.85.6.1.1.14.15.1.4 |
The current state of the session. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
starting(1), running(2), stopping(3) |
|
vLtSessDisconnect |
1.3.6.1.4.1.85.6.1.1.14.15.1.5 |
A control to terminate the session. In response to
a get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes termination. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), execute(2) |
|
vLtSessSvcName |
1.3.6.1.4.1.85.6.1.1.14.15.1.6 |
A (readable) text string indicating the name of the
LAT-compatible remote service. A zero-length value
indicates that the remote service for this session is
unknown. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
vLtSessNodeName |
1.3.6.1.4.1.85.6.1.1.14.15.1.7 |
A (readable) text string indicating the name of the
LAT-compatible remote node. A zero-length value
indicates that the remote node for this session is
unknown. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
vLtSessDestName |
1.3.6.1.4.1.85.6.1.1.14.15.1.8 |
A (readable) text string indicating the name of the
LAT-compatible remote destination port. A zero-length
value indicates that the remote port name for this
session is unknown. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
vLtTotalRcvPkts |
1.3.6.1.4.1.85.6.1.1.14.16 |
A count of the total number of LAT-compatible messages
received and processed by the unit. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtTotalTrnPkts |
1.3.6.1.4.1.85.6.1.1.14.17 |
A count of the total number of LAT-compatible messages
transmitted by the unit. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtTotalRetranPkts |
1.3.6.1.4.1.85.6.1.1.14.18 |
A count of the total number of LAT-compatible messages
retransmited. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtRcvCorruptPkts |
1.3.6.1.4.1.85.6.1.1.14.19 |
A count of the total number of LAT-compatible station
packets recieved which were found to be invalid or
corrupted. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtRcvCorruptMcasts |
1.3.6.1.4.1.85.6.1.1.14.20 |
A count of the total number of LAT-compatible multicast
packets recieved which were found to be invalid or
corrupted. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtRcvDuplicatePkts |
1.3.6.1.4.1.85.6.1.1.14.21 |
A count of the total number of LAT-compatible messages
received which had already been acknowledged by the
unit. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtReqAccepted |
1.3.6.1.4.1.85.6.1.1.14.22 |
A count of the total number of remote connection
requests which were received and accepted by the unit. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtReqRejected |
1.3.6.1.4.1.85.6.1.1.14.23 |
A count of the total number of remote connection
requests which were received and rejected by the unit. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vLtTotalNodeDiscards |
1.3.6.1.4.1.85.6.1.1.14.24 |
A count of the total number of LAT-compatible nodes that
the unit has not been able to insert into its internal
node table, due to resource failures. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
vQueMaxEntries |
1.3.6.1.4.1.85.6.1.1.15.1 |
An integer indicating the maximum number of queued
connection requests. This governs the maximum value that
vQueCurrNumber can take. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..128 |
|
vQueCurrNumber |
1.3.6.1.4.1.85.6.1.1.15.2 |
An integer indicating the current number of entries in
vQueTable. This object is not constant. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vQueTable |
1.3.6.1.4.1.85.6.1.1.15.3 |
A list of queue entries. The number of entries is given
by the value of vQueCurrNumber. |
Status: optional |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VQueEntry |
|
vQueEntry |
1.3.6.1.4.1.85.6.1.1.15.3.1 |
Parameter and status values for a queue entry. |
Status: optional |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VQueEntry |
|
|
vQueEntryNumber |
1.3.6.1.4.1.85.6.1.1.15.3.1.1 |
A unique identifier for the queue entry. Entry numbers
may be re-used, but there will never be two simultaneous
queue entries with the same value of vQueEntryNumber. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
vQueSvcName |
1.3.6.1.4.1.85.6.1.1.15.3.1.2 |
The name of the service for which this queue entry is
awating connection. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
vQueNodeName |
1.3.6.1.4.1.85.6.1.1.15.3.1.3 |
The name of the remote node with which the connection
will take place. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
vQuePortName |
1.3.6.1.4.1.85.6.1.1.15.3.1.4 |
The name of the port with which the connection will take
place. |
Status: optional |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
vQueStatus |
1.3.6.1.4.1.85.6.1.1.15.3.1.5 |
The current status of the queue entry. Setting the
value of this object to 'invalid(2)' has the effect of
deleting the queue entry. |
Status: optional |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
vSnmpWriteEnable |
1.3.6.1.4.1.85.6.1.1.16.4 |
An integer which indicates whether SET requests are
permitted from any management station. This flag
overrides use of the WRITE or READWRITE community names.
Thus, if this object has the value disabled(2), no SET
requests are permitted regardless of community name. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSnmpTrapDestCurrNumber |
1.3.6.1.4.1.85.6.1.1.16.5 |
An integer indicating the current number of entries in
vSnmpTrapDestTable. This object is not constant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vSnmpTrapDestTable |
1.3.6.1.4.1.85.6.1.1.16.6 |
A list of destination management stations to which this
agent will address certain generated trap messages. The
number of entries is given by the value of
vSnmpTrapDestCurrNumber. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VSnmpTrapDestEntry |
|
vSnmpTrapDestEntry |
1.3.6.1.4.1.85.6.1.1.16.6.1 |
Parameter and status values for a SNMP trap destination
entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VSnmpTrapDestEntry |
|
|
vSnmpTrapDestAddr |
1.3.6.1.4.1.85.6.1.1.16.6.1.1 |
The IP address of this trap destination node. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
vSnmpTrapDestColdEnable |
1.3.6.1.4.1.85.6.1.1.16.6.1.3 |
An indication of whether trap messages of the
'cold-start' type will be sent to this trap destination. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSnmpTrapDestAuthEnable |
1.3.6.1.4.1.85.6.1.1.16.6.1.4 |
An indication of whether trap messages of the
'authentication-failure' type will be sent to this trap
destination. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vSnmpTrapDestStatus |
1.3.6.1.4.1.85.6.1.1.16.6.1.5 |
The current status of the trap destination entry.
Setting this object to the value 'invalid(2)' has the
effect of deleting the entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|