Unisphere-Data-RADIUS-CLIENT-MIB

File: Unisphere-Data-RADIUS-CLIENT-MIB.mib (82738 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
Unisphere-Data-MIBs

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Integer32 Gauge32 IpAddress
TimeTicks DisplayString RowStatus
TruthValue MODULE-COMPLIANCE OBJECT-GROUP
usDataMibs

Defined Types

UsdRadiusAuthClientServerEntry  
SEQUENCE    
  usdRadiusAuthClientServerAddress IpAddress
  usdRadiusAuthClientServerPortNumber Integer32
  usdRadiusAuthClientRoundTripTime TimeTicks
  usdRadiusAuthClientAccessRequests Counter32
  usdRadiusAuthClientAccessRetransmissions Counter32
  usdRadiusAuthClientAccessAccepts Counter32
  usdRadiusAuthClientAccessRejects Counter32
  usdRadiusAuthClientAccessChallenges Counter32
  usdRadiusAuthClientMalformedAccessResponses Counter32
  usdRadiusAuthClientBadAuthenticators Counter32
  usdRadiusAuthClientPendingRequests Gauge32
  usdRadiusAuthClientTimeouts Counter32
  usdRadiusAuthClientUnknownTypes Counter32
  usdRadiusAuthClientPacketsDropped Counter32

UsdRadiusAuthClientCfgServerEntry  
SEQUENCE    
  usdRadiusAuthClientCfgServerAddress IpAddress
  usdRadiusAuthClientCfgServerPortNumber Integer32
  usdRadiusAuthClientCfgKey DisplayString
  usdRadiusAuthClientCfgTimeoutInterval Integer32
  usdRadiusAuthClientCfgRetries Integer32
  usdRadiusAuthClientCfgMaxPendingRequests Integer32
  usdRadiusAuthClientCfgRowStatus RowStatus
  usdRadiusAuthClientCfgPrecedence Integer32
  usdRadiusAuthClientCfgDeadTime Integer32

UsdRadiusAcctClientServerEntry  
SEQUENCE    
  usdRadiusAcctClientServerAddress IpAddress
  usdRadiusAcctClientServerPortNumber Integer32
  usdRadiusAcctClientRoundTripTime TimeTicks
  usdRadiusAcctClientRequests Counter32
  usdRadiusAcctClientRetransmissions Counter32
  usdRadiusAcctClientResponses Counter32
  usdRadiusAcctClientMalformedResponses Counter32
  usdRadiusAcctClientBadAuthenticators Counter32
  usdRadiusAcctClientPendingRequests Gauge32
  usdRadiusAcctClientTimeouts Counter32
  usdRadiusAcctClientUnknownTypes Counter32
  usdRadiusAcctClientPacketsDropped Counter32

UsdRadiusAcctClientCfgServerEntry  
SEQUENCE    
  usdRadiusAcctClientCfgServerAddress IpAddress
  usdRadiusAcctClientCfgServerPortNumber Integer32
  usdRadiusAcctClientCfgKey DisplayString
  usdRadiusAcctClientCfgTimeoutInterval Integer32
  usdRadiusAcctClientCfgRetries Integer32
  usdRadiusAcctClientCfgMaxPendingRequests Integer32
  usdRadiusAcctClientCfgRowStatus RowStatus
  usdRadiusAcctClientCfgPrecedence Integer32
  usdRadiusAcctClientCfgDeadTime Integer32

Defined Values

usdRadiusClientMIB 1.3.6.1.4.1.4874.2.2.19
The RADIUS Client MIB for the Unisphere Networks enterprise.
MODULE-IDENTITY    

usdRadiusClientObjects 1.3.6.1.4.1.4874.2.2.19.1
OBJECT IDENTIFIER    

usdRadiusGeneralClient 1.3.6.1.4.1.4874.2.2.19.1.1
OBJECT IDENTIFIER    

usdRadiusAuthClient 1.3.6.1.4.1.4874.2.2.19.1.2
OBJECT IDENTIFIER    

usdRadiusAcctClient 1.3.6.1.4.1.4874.2.2.19.1.3
OBJECT IDENTIFIER    

usdRadiusClientIdentifier 1.3.6.1.4.1.4874.2.2.19.1.1.1
The NAS-Identifier of the RADIUS client.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

usdRadiusClientAlgorithm 1.3.6.1.4.1.4874.2.2.19.1.1.2
The algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order of precedence, each time beginning with the highest precedence server and proceeding to lower precedence servers if the the RADIUS request fails, until the request succeeds or all servers have been tried. roundRobin Use servers in round-robin order, each time beginning with the next round-robin-ordered server and proceeding cyclically through servers if the RADIUS request fails, until the request succeeds or all servers have been tried.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER direct(0), roundRobin(1)  

usdRadiusClientSourceAddress 1.3.6.1.4.1.4874.2.2.19.1.1.3
The source address used by the RADIUS client in requests to the RADIUS server. The RADIUS server returns responses from this address. Setting this object to 0.0.0.0 will reset the value to its default.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

usdRadiusClientUdpChecksum 1.3.6.1.4.1.4874.2.2.19.1.1.4
Enables/disables the checksum calculations on RADIUS UDP packets.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientNasIdentifier 1.3.6.1.4.1.4874.2.2.19.1.1.5
The identifier used by the client for the value of NAS-Identifier attribute (number 32) in access and accounting requests. The default is to use the system name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

usdRadiusClientDslPortType 1.3.6.1.4.1.4874.2.2.19.1.1.6
The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for DSL interfaces in the RADIUS access and accounting messages: virtual Used for Virtual interfaces. sdsl Used for Symmetric DSL. adsl-cap Used for Asymmetric DSL, Carrierless Amplitude Phase Modulation. adsl-dmt Used for Asymmetric DSL, Discrete Multi-Tone. idsl Used for ISDN Digital Subscriber Line. xdsl Used for Digital Subscriber Line of unknown type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER virtual(5), sdsl(11), adsl-cap(12), adsl-dmt(13), idsl(14), xdsl(16)  

usdRadiusClientTunnelAccounting 1.3.6.1.4.1.4874.2.2.19.1.1.7
Enables/disables the tunnel accounting feature, which causes the system to send tunnel and session accounting requests.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientAcctSessionIdFormat 1.3.6.1.4.1.4874.2.2.19.1.1.8
The format used by the client for the Acct-Session-ID attribute (attribute number 44): decimal Use an ASCII decimal value only in the Acct-Session-ID attribute. description Use an ASCII description value which includes the interface type (i.e. ATM), slot, port, and circuit number (VPI and VCI for ATM), and a hexidecimal value in the Acct-Session-ID attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER decimal(0), description(1)  

usdRadiusClientNasPortFormat 1.3.6.1.4.1.4874.2.2.19.1.1.9
The format used by the client for the NAS-Port attribute (attribute number 5): xssssppp In the NAS-Port attribute (attribute 5) use format of 0 bit, followed by 4 bits for the slot number, 3 bits for the port number, and finally, the circuit number in the remaining bits. ssssxppp In the NAS-Port attribute (attribute 5) use format of 4 bits for the slot number, followed by a 0 bit, 3 bits for the port number and finally, the circuit number in the remaining bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER xssssppp(0), ssssxppp(1)  

usdRadiusClientCallingStationDelimiter 1.3.6.1.4.1.4874.2.2.19.1.1.10
The character use as for delimiting fields in the Calling-Station-ID attribute (attribute 31, from RFC 2865) sent by the client. The default value is '#'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1)  

usdRadiusClientEthernetPortType 1.3.6.1.4.1.4874.2.2.19.1.1.11
The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for Ethernet interfaces in the RADIUS access and accounting messages: ethernet Used for Ethernet interfaces. virtual Used for Virtual interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER virtual(5), ethernet(15)  

usdRadiusClientIncludeIpAddrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.12
Enables/disables the inclusion of the Framed-IP-Address attribute in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeAcctSessionIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.13
Enables/disables the inclusion of the Acct-Session-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientRollover 1.3.6.1.4.1.4874.2.2.19.1.1.14
Enables/disables the rollover to next server on receipt of access-reject.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientCallingStationIdFormat 1.3.6.1.4.1.4874.2.2.19.1.1.15
The format used by the client for the Calling-Station-ID attribute (attribute number 31): delimited In the Calling-Station-ID attribute (attribute 31) use the format ' '. fixedFomat In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delimited(0), fixedFormat(1)  

usdRadiusClientNasIpAddrUse 1.3.6.1.4.1.4874.2.2.19.1.1.16
The value used by the client for the NAS-IP-Addr attribute (attribute number 4): normal Use the ERX IP address value in the NAS-IP-Addr attribute (attribute 4). tunnelClientEndpoint Use the Tunnel Client's address value in the NAS-IP-Addr attribute (attribute 4) for tunnel users.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), tunnelClientEndpoint(1)  

usdRadiusClientIncludeAcctTunnelConnectionInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.17
Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeCalledStationIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.18
Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeCallingStationIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.19
Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeConnectInfoInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.20
Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasIdentifierInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.21
Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.22
Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.23
Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortTypeInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.24
Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludePppoeDescriptionInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.25
Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelClientAuthIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.26
Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelClientEndpointInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.27
Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelMediumTypeInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.28
Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerAttributesInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.29
Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerAuthIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.30
Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerEndpointInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.31
Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelTypeInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.32
Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeAcctTunnelConnectionInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.33
Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeCalledStationIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.34
Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeCallingStationIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.35
Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeClassInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.36
Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeConnectInfoInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.37
Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeEgressPolicyNameInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.38
Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeEventTimestampInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.39
Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeFramedCompressionInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.40
Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeFramedIpNetmaskInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.41
Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeIngressPolicyNameInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.42
Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasIdentifierInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.43
Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.44
Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.45
Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortTypeInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.46
Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludePppoeDescriptionInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.47
Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelAssignmentIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.48
Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelClientAuthIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.49
Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelClientEndpointInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.50
Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelMediumTypeInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.51
Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelPreferenceInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.52
Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerAttributesInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.53
Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerAuthIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.54
Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerEndpointInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.55
Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelTypeInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.56
Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeAcctTunnelConnectionInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.57
Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeCalledStationIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.59
Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeCallingStationIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.60
Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeClassInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.61
Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeConnectInfoInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.62
Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeEgressPolicyNameInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.63
Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeEventTimestampInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.64
Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeFramedCompressionInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.65
Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeFramedIpNetmaskInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.66
Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeIngressPolicyNameInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.67
Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeInputGigawordsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.68
Enables/disables the inclusion of the Input-Gigawords attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasIdentifierInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.69
Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.70
Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.71
Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeNasPortTypeInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.72
Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeOutputGigawordsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.73
Enables/disables the inclusion of the Output-Gigawords attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludePppoeDescriptionInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.74
Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelAssignmentIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.75
Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelClientAuthIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.76
Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelClientEndpointInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.77
Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelMediumTypeInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.78
Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelPreferenceInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.79
Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerAttributesInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.80
Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerAuthIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.81
Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelServerEndpointInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.82
Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeTunnelTypeInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.83
Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeInputGigapktsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.84
Enables/disables the inclusion of the Input-Gigapkts attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIncludeOutputGigapktsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.85
Enables/disables the inclusion of the Output-Gigapkts attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusClientIgnoreFramedIpNetmask 1.3.6.1.4.1.4874.2.2.19.1.1.86
Enables/disables ignoring the Framed-IP-Netmask attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdRadiusAuthClientInvalidServerAddresses 1.3.6.1.4.1.4874.2.2.19.1.2.1
The number of RADIUS Access-Response packets received from unknown addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientServerTable 1.3.6.1.4.1.4874.2.2.19.1.2.2
The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdRadiusAuthClientServerEntry

usdRadiusAuthClientServerEntry 1.3.6.1.4.1.4874.2.2.19.1.2.2.1
An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdRadiusAuthClientServerEntry  

usdRadiusAuthClientServerAddress 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.1
The IP address of the RADIUS authentication server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

usdRadiusAuthClientServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

usdRadiusAuthClientRoundTripTime 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.3
The time interval (in hundredths of seconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

usdRadiusAuthClientAccessRequests 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.4
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientAccessRetransmissions 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.5
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientAccessAccepts 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.6
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientAccessRejects 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.7
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientAccessChallenges 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.8
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientMalformedAccessResponses 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.9
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientBadAuthenticators 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.10
The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.11
The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

usdRadiusAuthClientTimeouts 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.12
The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientUnknownTypes 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.13
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientPacketsDropped 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.14
The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAuthClientCfgServerTable 1.3.6.1.4.1.4874.2.2.19.1.2.3
The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdRadiusAuthClientCfgServerEntry

usdRadiusAuthClientCfgServerEntry 1.3.6.1.4.1.4874.2.2.19.1.2.3.1
An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdRadiusAuthClientCfgServerEntry  

usdRadiusAuthClientCfgServerAddress 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.1
The IP address of the RADIUS authentication server referred to in this table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

usdRadiusAuthClientCfgServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

usdRadiusAuthClientCfgKey 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.3
The secret (RADIUS authenticator) used by the client during exchanges with this authentication server. The default is a zero-length string, indicating no authenticator is used.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

usdRadiusAuthClientCfgTimeoutInterval 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.4
The interval between retransmissions of a request to this authentication server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 3..30  

usdRadiusAuthClientCfgRetries 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.5
The maximum number of times to resend a request to this authentication server (in addition to the original request), before resorting to the server specified in the next entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16  

usdRadiusAuthClientCfgMaxPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.6
The maximum number of outstanding requests this server can support.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 10..4000  

usdRadiusAuthClientCfgRowStatus 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.7
Supports 'createAndGo' and 'destroy' only.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

usdRadiusAuthClientCfgPrecedence 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.8
Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

usdRadiusAuthClientCfgDeadTime 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.9
The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..30  

usdRadiusAcctClientInvalidServerAddresses 1.3.6.1.4.1.4874.2.2.19.1.3.1
The number of RADIUS Accounting-Response packets received from unknown addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientServerTable 1.3.6.1.4.1.4874.2.2.19.1.3.2
The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdRadiusAcctClientServerEntry

usdRadiusAcctClientServerEntry 1.3.6.1.4.1.4874.2.2.19.1.3.2.1
An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdRadiusAcctClientServerEntry  

usdRadiusAcctClientServerAddress 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.1
The IP address of the RADIUS accounting server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

usdRadiusAcctClientServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

usdRadiusAcctClientRoundTripTime 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.3
The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

usdRadiusAcctClientRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.4
The number of RADIUS Accounting-Request packets sent. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientRetransmissions 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.5
The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.6
The number of RADIUS packets received on the accounting port from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientMalformedResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.7
The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientBadAuthenticators 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.8
The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.9
The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

usdRadiusAcctClientTimeouts 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.10
The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientUnknownTypes 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.11
The number of RADIUS packets of unknown type which were received from this server on the accounting port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientPacketsDropped 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.12
The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdRadiusAcctClientCfgServerTable 1.3.6.1.4.1.4874.2.2.19.1.3.3
The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdRadiusAcctClientCfgServerEntry

usdRadiusAcctClientCfgServerEntry 1.3.6.1.4.1.4874.2.2.19.1.3.3.1
An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdRadiusAcctClientCfgServerEntry  

usdRadiusAcctClientCfgServerAddress 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.1
The IP address of the RADIUS accounting server referred to in this table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

usdRadiusAcctClientCfgServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

usdRadiusAcctClientCfgKey 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.3
The secret (RADIUS authenticator) used by the client during exchanges with this accounting server. The default is a zero-length string, indicating no authenticator is used.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

usdRadiusAcctClientCfgTimeoutInterval 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.4
The interval between retransmissions of a request to this accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 3..30  

usdRadiusAcctClientCfgRetries 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.5
The maximum number of times to resend a request to this accounting server (in addition to the original request), before resorting to the server specified in the next entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16  

usdRadiusAcctClientCfgMaxPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.6
The maximum number of outstanding requests this server can support.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 10..4000  

usdRadiusAcctClientCfgRowStatus 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.7
Supports 'createAndGo' and 'destroy' only.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

usdRadiusAcctClientCfgPrecedence 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.8
Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

usdRadiusAcctClientCfgDeadTime 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.9
The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..30  

usdRadiusClientMIBConformance 1.3.6.1.4.1.4874.2.2.19.2
OBJECT IDENTIFIER    

usdRadiusClientMIBCompliances 1.3.6.1.4.1.4874.2.2.19.2.1
OBJECT IDENTIFIER    

usdRadiusClientMIBGroups 1.3.6.1.4.1.4874.2.2.19.2.2
OBJECT IDENTIFIER    

usdRadiusAuthClientCompliance 1.3.6.1.4.1.4874.2.2.19.2.1.1
Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when the usdRadiusClientSourceAddress object was added.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusAcctClientCompliance 1.3.6.1.4.1.4874.2.2.19.2.1.2
Obsolete compliance statement for accounting clients implementing the Unisphere RADIUS Client MIB accounting functionality. This statement became obsolete when the usdRadiusClientSourceAddress object was added.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusAuthClientCompliance2 1.3.6.1.4.1.4874.2.2.19.2.1.3
Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusAcctClientCompliance2 1.3.6.1.4.1.4874.2.2.19.2.1.4
Obsolete compliance statement for accounting clients implementing the Unisphere RADIUS Client MIB accounting functionality. This statement became obsolete when new objects were added.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusClientCompliance 1.3.6.1.4.1.4874.2.2.19.2.1.5
Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when new B-RAS objects were added.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusClientCompliance2 1.3.6.1.4.1.4874.2.2.19.2.1.6
Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusClientCompliance3 1.3.6.1.4.1.4874.2.2.19.2.1.7
Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when the usdRadiusClientNasIpAddrUse object was added.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusClientCompliance4 1.3.6.1.4.1.4874.2.2.19.2.1.8
Obsolete compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality. This statement became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

usdRadiusClientCompliance5 1.3.6.1.4.1.4874.2.2.19.2.1.9
The compliance statement for authentication clients implementing the Unisphere RADIUS Client MIB authentication functionality.
Status: current Access: read-create
MODULE-COMPLIANCE    

usdRadiusGeneralClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.1
Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when usdRadiusClientSourceAddress was added.
Status: obsolete Access: read-create
OBJECT-GROUP    

usdRadiusAuthClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.2
The basic collection of objects providing management of RADIUS Authentication Clients.
Status: current Access: read-create
OBJECT-GROUP    

usdRadiusAcctClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.3
The basic collection of objects providing management of RADIUS Accounting Clients.
Status: current Access: read-create
OBJECT-GROUP    

usdRadiusGeneralClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.4
Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when new objects were added.
Status: obsolete Access: read-create
OBJECT-GROUP    

usdRadiusBasicClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.5
Obsolete collection of objects providing basic management of RADIUS Clients. This group became obsolete when the usdRadiusClientRollover object was added.
Status: obsolete Access: read-create
OBJECT-GROUP    

usdRadiusBrasClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.6
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added.
Status: obsolete Access: read-create
OBJECT-GROUP    

usdRadiusTunnelClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.7
An object providing management of tunneling functions for RADIUS Clients.
Status: current Access: read-create
OBJECT-GROUP    

usdRadiusBrasClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.8
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the usdRadiusClientCallingStationIdFormat object was added.
Status: obsolete Access: read-create
OBJECT-GROUP    

usdRadiusBasicClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.9
A collection of objects providing basic management of RADIUS Clients.
Status: current Access: read-create
OBJECT-GROUP    

usdRadiusBrasClientGroup3 1.3.6.1.4.1.4874.2.2.19.2.2.10
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the usdRadiusClientNasIpAddrUse object was added.
Status: obsolete Access: read-create
OBJECT-GROUP    

usdRadiusBrasClientGroup4 1.3.6.1.4.1.4874.2.2.19.2.2.11
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
Status: obsolete Access: read-create
OBJECT-GROUP    

usdRadiusBrasClientGroup5 1.3.6.1.4.1.4874.2.2.19.2.2.12
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: current Access: read-create
OBJECT-GROUP