Unisphere-Data-IP-POLICY-MIB
File:
Unisphere-Data-IP-POLICY-MIB.mib (56388 bytes)
Imported modules
Imported symbols
Defined Types
| UsdIpPolicyName |
|
| IP access list name. Represents textual information taken from the NVT
ASCII character set. |
| TEXTUAL-CONVENTION |
|
|
|
| |
OCTET STRING |
Size(0..32) |
|
| UsdIpPolicyPolicy |
|
| The set of IP policy actions. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
permit(0), deny(1) |
|
| UsdIpRedistributeProtocol |
|
| The set of protocols choices used to configure to/from settings in an
IP Redistribution element. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
ipRedistrProtocolStatic(1), ipRedistrProtocolBgp(2), ipRedistrProtocolMBgp(3), ipRedistrProtocolOspf(4), ipRedistrProtocolIsis(5), ipRedistrProtocolRip(6), ipRedistrProtocolConnected(7), ipRedistrProtocolDefaultRoute(8), ipRedistrProtocolAccess(9), ipRedistrProtocolAccessInternal(10), ipRedistrProtocolDvmrp(11) |
|
| UsdIpPolicyAdminStatus |
|
| The administratively assigned management state for an IP route policy. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
ipPolicyAdminStateDisable(0), ipPolicyAdminStateEnable(1) |
|
| UsdIpAccessListEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpAccessListId |
Integer32 |
|
| |
usdIpAccessListElemId |
Integer32 |
|
| |
usdIpAccessListRowStatus |
RowStatus |
|
| |
usdIpAccessListAction |
UsdIpPolicyPolicy |
|
| |
usdIpAccessListSrc |
IpAddress |
|
| |
usdIpAccessListSrcMask |
IpAddress |
|
| |
usdIpAccessListDst |
IpAddress |
|
| |
usdIpAccessListDstMask |
IpAddress |
|
| |
usdIpAccessListProtocol |
Integer32 |
|
| UsdIpNamedAccessListEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpNamedAccessListName |
UsdIpPolicyName |
|
| |
usdIpNamedAccessListElemId |
Integer32 |
|
| |
usdIpNamedAccessListRowStatus |
RowStatus |
|
| |
usdIpNamedAccessListAction |
UsdIpPolicyPolicy |
|
| |
usdIpNamedAccessListSrc |
IpAddress |
|
| |
usdIpNamedAccessListSrcMask |
IpAddress |
|
| |
usdIpNamedAccessListDst |
IpAddress |
|
| |
usdIpNamedAccessListDstMask |
IpAddress |
|
| |
usdIpNamedAccessListProtocol |
Integer32 |
|
| UsdIpAspAccessEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpAspAccessName |
UsdIpPolicyName |
|
| |
usdIpAspAccessElemId |
Integer32 |
|
| |
usdIpAspAccessCreatedInternally |
TruthValue |
|
| |
usdIpAspAccessPolicy |
UsdIpPolicyPolicy |
|
| |
usdIpAspAccessExpression |
OCTET STRING |
|
| |
usdIpAspAccessRowStatus |
RowStatus |
|
| UsdIpPrefixListEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpPrefixListName |
UsdIpPolicyName |
|
| |
usdIpPrefixListElemId |
Integer32 |
|
| |
usdIpPrefixListIpAddress |
IpAddress |
|
| |
usdIpPrefixListLength |
Integer32 |
|
| |
usdIpPrefixListPolicy |
UsdIpPolicyPolicy |
|
| |
usdIpPrefixListGeValue |
Integer32 |
|
| |
usdIpPrefixListLeValue |
Integer32 |
|
| |
usdIpPrefixListDescription |
DisplayString |
|
| |
usdIpPrefixListHitCount |
Counter32 |
|
| |
usdIpPrefixListRowStatus |
RowStatus |
|
| UsdIpPrefixTreeEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpPrefixTreeName |
UsdIpPolicyName |
|
| |
usdIpPrefixTreeIpAddress |
IpAddress |
|
| |
usdIpPrefixTreeLength |
Integer32 |
|
| |
usdIpPrefixTreePolicy |
UsdIpPolicyPolicy |
|
| |
usdIpPrefixTreeDescription |
DisplayString |
|
| |
usdIpPrefixTreeHitCount |
Counter32 |
|
| |
usdIpPrefixTreeRowStatus |
RowStatus |
|
| UsdIpDynRedistributeEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpDynRedistributeToProtocol |
UsdIpRedistributeProtocol |
|
| |
usdIpDynRedistributeState |
UsdIpPolicyAdminStatus |
|
| |
usdIpDynRedistributeRowStatus |
RowStatus |
|
| UsdIpRedistributeEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpRedistributeToProtocol |
UsdIpRedistributeProtocol |
|
| |
usdIpRedistributeFromProtocol |
UsdIpRedistributeProtocol |
|
| |
usdIpRedistributeState |
UsdIpPolicyAdminStatus |
|
| |
usdIpRedistributeRouteMapName |
UsdIpPolicyName |
|
| |
usdIpRedistributeRowStatus |
RowStatus |
|
| UsdIpRouteMapEntry |
|
| SEQUENCE |
|
|
|
| |
usdIpRouteMapName |
UsdIpPolicyName |
|
| |
usdIpRouteMapSequenceNum |
Integer32 |
|
| |
usdIpRouteMapElemId |
Integer32 |
|
| |
usdIpRouteMapSubElemId |
Integer32 |
|
| |
usdIpRouteMapCreatedInternally |
TruthValue |
|
| |
usdIpRouteMapPolicy |
UsdIpPolicyPolicy |
|
| |
usdIpRouteMapDisplay |
OCTET STRING |
|
Defined Values
| usdIpPolicyMIB |
1.3.6.1.4.1.4874.2.2.13 |
| The IP Policy MIB for the Unisphere Networks Inc. enterprise. |
| MODULE-IDENTITY |
|
|
|
| usdIpAccessListTable |
1.3.6.1.4.1.4874.2.2.13.1.1.1 |
| This table contains entries for elements of IP access lists. Entries
belonging to the same access list are ordered, and comparisons to those
entries are performed in that order until a match is detected. If no
match is found, the default action is to 'deny'. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
UsdIpAccessListEntry |
|
| usdIpAccessListEntry |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1 |
| Each entry describes the characteristics of an IP access list element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpAccessListEntry |
|
|
| usdIpAccessListId |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.1 |
| The number of the access list to which this entry belongs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..10000 |
|
| usdIpAccessListElemId |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.2 |
| The relative position of this entry within its access list. Access
list entries are searched in this sequence (low to high values) until a
match is found.
NOTE: The value zero is reserved for use with SET operations to perform
special-purpose table entry creations/deletions; see the DESCRIPTION of
usdIpAccessListRowStatus for details.
Get/GetNext/GetBulk retrievals never return an entry for which this
object is zero-valued. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..10000 |
|
| usdIpAccessListRowStatus |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.3 |
| Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
Two configuration levels are defined, limited and full. EARLY
IMPLEMENTATIONS MIGHT PROVIDE ONLY THE LIMITED LEVEL OF CONFIGURATION
CAPABILITY.
*** LIMITED ACCESS LIST CONFIGURATION LEVEL ***
1) RowStatus createAndGo/destroy operations directed to a target table
entry for which usdIpAccessListElemId is ZERO, have the following
special-purpose semantics:
createAndGo Create an entry having the specified
configuration and append it to the target list,
i.e. assign it a value of usdIpAccessListElemId
that is one greater than the current last
element in the list.
destroy Destroy the specified list and all of its
constituent elements.
2) RowStatus createAndGo/destroy operations directed to a target table
entry for which usdIpAccessListElemId is NONZERO are disallowed.
*** FULL ACCESS LIST CONFIGURATION LEVEL ***
Permit conventional RowStatus-based management of table entries having a
nonzero value for usdIpAccessListElemId, IN ADDITION TO the special
RowStatus semantics applied to entries having a zero value for
usdIpAccessListElemId.
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpAccessListRowStatus
In addition, when creating an entry the following conditions must hold:
The value of usdIpAccessListElemId is nonzero.
Once created, element attributes cannot be modified except by a
RowStatus destroy operation to delete the list element. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| usdIpAccessListAction |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.4 |
| Specifies the disposition of an item that matches the comparison
criteria described by this entry. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPolicyPolicy |
|
|
| usdIpAccessListSrc |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.5 |
| A source IP address. A subject IP address is first masked with the
value of usdIpAccessListSrcMask, then the result is compared to this
value. Setting both this object and its corresponding mask to 0.0.0.0
acts as a wildcard, matching any source IP address. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpAccessListSrcMask |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.6 |
| The IP address mask to be applied to a subject source IP address before
comparing it to usdIpAccessListSrc. Ones in the mask identify which bits
in the subject IP address are significant for the comparison.
To be considered valid, a nonzero value for this object must contain a
single contiguous string of ones, beginning with the most significant
bit of the mask. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpAccessListDst |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.7 |
| A destination IP address. A subject IP address is first masked with
the value of usdIpAccessListDstMask, then the result is compared to this
value. Setting both this object and its corresponding mask to 0.0.0.0
acts as a wildcard, matching any destination IP address. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpAccessListDstMask |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.8 |
| The IP address mask to be applied to a subject destination IP address
before comparing it to usdIpAccessListDst. Ones in the mask identify
which bits in the IP address are significant for the comparison.
To be considered valid, a nonzero value for this object must contain a
single contiguous string of ones, beginning with the most significant
bit of the mask. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpAccessListProtocol |
1.3.6.1.4.1.4874.2.2.13.1.1.1.1.9 |
| An IP Protocol value. Nonzero values match a specific IP Protocol
value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as
a wildcard, matching any IP Protocol. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..255 |
|
| usdIpNamedAccessListTable |
1.3.6.1.4.1.4874.2.2.13.1.2.1 |
| This table contains entries for elements of IP access lists. Entries
belonging to the same access list are ordered, and comparisons to those
entries are performed in that order until a match is detected. If no
match is found, the default action is to 'deny'. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
UsdIpNamedAccessListEntry |
|
| usdIpNamedAccessListEntry |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1 |
| Each entry describes the characteristics of an IP access list element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpNamedAccessListEntry |
|
|
| usdIpNamedAccessListElemId |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.2 |
| The relative position of this entry within its access list. Access
list entries are searched in this sequence (low to high values) until a
match is found.
NOTE: The value zero is reserved for use with SET operations to perform
special-purpose table entry creations/deletions; see the DESCRIPTION of
usdIpNamedAccessListRowStatus for details.
Get/GetNext/GetBulk retrievals never return an entry for which this
object is zero-valued. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..10000 |
|
| usdIpNamedAccessListRowStatus |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.3 |
| Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
Two configuration levels are defined, limited and full. EARLY
IMPLEMENTATIONS MIGHT PROVIDE ONLY THE LIMITED LEVEL OF CONFIGURATION
CAPABILITY.
*** LIMITED ACCESS LIST CONFIGURATION LEVEL ***
1) RowStatus createAndGo/destroy operations directed to a target table
entry for which usdIpNamedAccessListElemId is ZERO, have the
following special-purpose semantics:
createAndGo Create an entry having the specified
configuration and append it to the target list,
i.e. assign it a value of
usdIpNamedAccessListElemId that is one greater
than the current last element in the list.
destroy Destroy the specified list and all of its
constituent elements.
2) RowStatus createAndGo/destroy operations directed to a target table
entry for which usdIpNamedAccessListElemId is NONZERO are
disallowed.
*** FULL ACCESS LIST CONFIGURATION LEVEL ***
Permit conventional RowStatus-based management of table entries having a
nonzero value for usdIpNamedAccessListElemId, IN ADDITION TO the special
RowStatus semantics applied to entries having a zero value for
usdIpNamedAccessListElemId.
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpNamedAccessListRowStatus
In addition, when creating an entry the following conditions must hold:
The value of usdIpNamedAccessListElemId is nonzero.
Once created, element attributes cannot be modified except by a
RowStatus destroy operation to delete the list element. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| usdIpNamedAccessListAction |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.4 |
| Specifies the disposition of an item that matches the comparison
criteria described by this entry. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPolicyPolicy |
|
|
| usdIpNamedAccessListSrc |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.5 |
| A source IP address. A subject IP address is first masked with the
value of usdIpNamedAccessListSrcMask, then the result is compared to this
value. Setting both this object and its corresponding mask to 0.0.0.0
acts as a wildcard, matching any source IP address. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpNamedAccessListSrcMask |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.6 |
| The IP address mask to be applied to a subject source IP address before
comparing it to usdIpNamedAccessListSrc. Ones in the mask identify which
bits in the subject IP address are significant for the comparison.
To be considered valid, a nonzero value for this object must contain a
single contiguous string of ones, beginning with the most significant
bit of the mask. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpNamedAccessListDst |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.7 |
| A destination IP address. A subject IP address is first masked with
the value of usdIpNamedAccessListDstMask, then the result is compared to
this value. Setting both this object and its corresponding mask to
0.0.0.0 acts as a wildcard, matching any destination IP address. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpNamedAccessListDstMask |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.8 |
| The IP address mask to be applied to a subject destination IP address
before comparing it to usdIpNamedAccessListDst. Ones in the mask
identify which bits in the IP address are significant for the
comparison.
To be considered valid, a nonzero value for this object must contain a
single contiguous string of ones, beginning with the most significant
bit of the mask. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpNamedAccessListProtocol |
1.3.6.1.4.1.4874.2.2.13.1.2.1.1.9 |
| An IP Protocol value. Nonzero values match a specific IP Protocol
value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as
a wildcard, matching any IP Protocol. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..255 |
|
| usdIpAspAccessTable |
1.3.6.1.4.1.4874.2.2.13.1.3.1 |
| This table contains entries for elements of IP AS-Path access entries. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
UsdIpAspAccessEntry |
|
| usdIpAspAccessEntry |
1.3.6.1.4.1.4874.2.2.13.1.3.1.1 |
| Each entry describes the characteristics of an IP AS-Path access
element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpAspAccessEntry |
|
|
| usdIpAspAccessName |
1.3.6.1.4.1.4874.2.2.13.1.3.1.1.1 |
| The name of the AS-Path Access List to which this entry belongs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPolicyName |
|
|
| usdIpAspAccessElemId |
1.3.6.1.4.1.4874.2.2.13.1.3.1.1.2 |
| The element ID portion of the IP AS-Path for this entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..10000 |
|
| usdIpAspAccessCreatedInternally |
1.3.6.1.4.1.4874.2.2.13.1.3.1.1.3 |
| Indicated whether this entry was created internally by the system, or
dynamically via a management interface. A true value for this object
indicates that this entry was created internally; false indicates
externally. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| usdIpAspAccessExpression |
1.3.6.1.4.1.4874.2.2.13.1.3.1.1.5 |
| The AS-Path access list expression for this entry. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(8..64) |
|
| usdIpAspAccessRowStatus |
1.3.6.1.4.1.4874.2.2.13.1.3.1.1.6 |
| Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpCommunityRowStatus
In addition, when creating an entry the following conditions must hold:
Once created, only certain attributes can be modified.
What are they? FIXME JCS |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| usdIpPrefixListTable |
1.3.6.1.4.1.4874.2.2.13.1.4.1 |
| This table contains entries for elements of IP prefix lists. Entries
belonging to the same prefix list are ordered, and comparisons to those
entries are performed in that order until a match is detected. If no
match is found, the default action is to 'deny'. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
UsdIpPrefixListEntry |
|
| usdIpPrefixListEntry |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1 |
| Each entry describes the characteristics of an IP prefix list element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPrefixListEntry |
|
|
| usdIpPrefixListName |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1.1 |
| The name of the prefix list to which this entry belongs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPolicyName |
|
|
| usdIpPrefixListElemId |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1.2 |
| The relative position of this entry within its prefix list. Access
list entries are searched in this sequence (low to high values) until a
match is found. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..10000 |
|
| usdIpPrefixListIpAddress |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1.3 |
| The IP Address portion of the IP List value for this entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpPrefixListLength |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1.4 |
| The length portion of the IP List value for this entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..32 |
|
| usdIpPrefixListGeValue |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1.6 |
| The minimum prefix length to apply to address. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..32 |
|
| usdIpPrefixListLeValue |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1.7 |
| The maximum prefix length to apply to address. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..32 |
|
| usdIpPrefixListRowStatus |
1.3.6.1.4.1.4874.2.2.13.1.4.1.1.10 |
| Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpPrefixListRowStatus
In addition, when creating an entry the following conditions must hold:
The value of usdIpPrefixListElemId is nonzero.
Once created, only certain attributes can be modified. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| usdIpPrefixTreeTable |
1.3.6.1.4.1.4874.2.2.13.1.5.1 |
| This table contains entries for elements of IP prefix trees. Entries
belonging to the same prefix tree are ordered, and comparisons to those
entries are performed in that order until a match is detected. If no
match is found, the default action is to 'deny'. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
UsdIpPrefixTreeEntry |
|
| usdIpPrefixTreeEntry |
1.3.6.1.4.1.4874.2.2.13.1.5.1.1 |
| Each entry describes the characteristics of an IP prefix tree element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPrefixTreeEntry |
|
|
| usdIpPrefixTreeName |
1.3.6.1.4.1.4874.2.2.13.1.5.1.1.1 |
| The name of the prefix tree to which this entry belongs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPolicyName |
|
|
| usdIpPrefixTreeIpAddress |
1.3.6.1.4.1.4874.2.2.13.1.5.1.1.2 |
| The IP Address portion of the IP Prefix value for this entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| usdIpPrefixTreeLength |
1.3.6.1.4.1.4874.2.2.13.1.5.1.1.3 |
| The length portion of the IP Prefix value for this entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..32 |
|
| usdIpPrefixTreeRowStatus |
1.3.6.1.4.1.4874.2.2.13.1.5.1.1.7 |
| Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpPrefixTreeRowStatus
In addition, when creating an entry the following conditions must hold:
The value of usdIpPrefixTreeIpAddress and usdIpPrefixTreeLength are
nonzero.
Once created, only certain attributes can be modified. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| usdIpDynRedistributeEntry |
1.3.6.1.4.1.4874.2.2.13.1.7.1.1 |
| Each entry describes the characteristics of a dynamic IP Route
Redistribute element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpDynRedistributeEntry |
|
|
| usdIpDynRedistributeRowStatus |
1.3.6.1.4.1.4874.2.2.13.1.7.1.1.3 |
| Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpDynRedistributeRowStatus
Once created, only the usdIpDynRedistributeState object can be modified. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| usdIpRedistributeEntry |
1.3.6.1.4.1.4874.2.2.13.1.7.2.1 |
| Each entry describes the characteristics of an IP Route Redistribution
element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpRedistributeEntry |
|
|
| usdIpRedistributeRowStatus |
1.3.6.1.4.1.4874.2.2.13.1.7.2.1.5 |
| Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpRedistributeRowStatus
usdIpRedistributeRouteMapName
Once created, only the usdIpRedistributeState object can be modified. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| usdIpRouteMapTable |
1.3.6.1.4.1.4874.2.2.13.1.8.1 |
| This table contains entries for elements of IP Route Maps. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
UsdIpRouteMapEntry |
|
| usdIpRouteMapEntry |
1.3.6.1.4.1.4874.2.2.13.1.8.1.1 |
| Each entry describes the characteristics of an IP Route Map element. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpRouteMapEntry |
|
|
| usdIpRouteMapName |
1.3.6.1.4.1.4874.2.2.13.1.8.1.1.1 |
| The name of the route map to which this entry belongs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UsdIpPolicyName |
|
|
| usdIpRouteMapSequenceNum |
1.3.6.1.4.1.4874.2.2.13.1.8.1.1.2 |
| The element ID value for this entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..2147483647 |
|
| usdIpRouteMapElemId |
1.3.6.1.4.1.4874.2.2.13.1.8.1.1.3 |
| The element ID to which this entry belongs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..2147483647 |
|
| usdIpRouteMapSubElemId |
1.3.6.1.4.1.4874.2.2.13.1.8.1.1.4 |
| The sub-element ID to which this entry belongs. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..2147483647 |
|
| usdIpRouteMapCreatedInternally |
1.3.6.1.4.1.4874.2.2.13.1.8.1.1.5 |
| Indicated whether this entry was created internally by the system, or
dynamically via a management interface. A true value for this object
indicates that this entry was created internally; false indicates
externally. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| usdIpRouteMapDisplay |
1.3.6.1.4.1.4874.2.2.13.1.8.1.1.7 |
| Textual information taken from the NVT ASCII character set
(i.e. RFC1903 DisplayString), but with increased length. The
information in this object is the series of set, match, and/or match &
set clauses for this route map.
It is assumed that the information conveyed in this object is used for
display purposes and in general, is not parsed. The information in this
string is a concatentation of routemap clauses configured via the
systems non SNMP interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..2048) |
|
| usdIpPolicyCompliance |
1.3.6.1.4.1.4874.2.2.13.4.1.1 |
| An obsolete compliance statement for entities that implement the
Unisphere IP Policy MIB. This statement became obsolete when support
was added for the IP Named Access List. |
| Status: obsolete |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| usdIpPolicyCompliance2 |
1.3.6.1.4.1.4874.2.2.13.4.1.2 |
| An obsolete compliance statement for entities that implement the
Unisphere IP Policy MIB. This statement became obsolete when support
was added for the IP ASP Access List, the IP Prefix List, the IP Prefix
Tree, the IP Community List, the IP Extended Community List, IP Dynamic
Route Redistribution, and the IP Route Map. |
| Status: obsolete |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| usdIpPolicyCompliance3 |
1.3.6.1.4.1.4874.2.2.13.4.1.3 |
| The compliance statement for entities that implement the Unisphere IP
Policy MIB. |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| usdIpAccessListGroup |
1.3.6.1.4.1.4874.2.2.13.4.2.1 |
| A collection of objects for managing IP access list capabilities in a
Unisphere product. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| usdIpNamedAccessListGroup |
1.3.6.1.4.1.4874.2.2.13.4.2.2 |
| A named collection of objects for managing IP access list capabilities
in a Unisphere product. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| usdIpAspAccessListGroup |
1.3.6.1.4.1.4874.2.2.13.4.2.3 |
| A named collection of objects for managing AS-Path access list
capabilities in a Unisphere product. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| usdIpPrefixListGroup |
1.3.6.1.4.1.4874.2.2.13.4.2.4 |
| A named collection of objects for managing Prefix list capabilities in
a Unisphere product. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| usdIpPrefixTreeGroup |
1.3.6.1.4.1.4874.2.2.13.4.2.5 |
| A named collection of objects for managing Prefix Tree capabilities in
a Unisphere product. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| usdIpRedistributeGroup |
1.3.6.1.4.1.4874.2.2.13.4.2.8 |
| A collection of objects for managing IP route redistribution list
capabilities in a Unisphere product. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| usdIpRouteMapGroup |
1.3.6.1.4.1.4874.2.2.13.4.2.9 |
| A collection of objects for managing IP route map list capabilities in
a Unisphere product. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|