UX-TRAP-MIB
File:
UX-TRAP-MIB.mib (237709 bytes)
Imported modules
Imported symbols
Defined Values
ux |
1.3.6.1.4.1.177.15 |
The MIB module for Sonus entities.
This MIB module describes the enterprise traps for the Sonus SBC 1000 and 2000. |
MODULE-IDENTITY |
|
|
|
net |
1.3.6.1.4.1.177 |
OBJECT IDENTIFIER |
|
|
|
uxObjects |
1.3.6.1.4.1.177.15.1 |
OBJECT IDENTIFIER |
|
|
|
uxTraps |
1.3.6.1.4.1.177.15.2 |
OBJECT IDENTIFIER |
|
|
|
uxAlmADcachingfailed |
1.3.6.1.4.1.177.15.2.65537 |
Failed to cache attributes from AD in memory. Suggested action - try again later. This alarm will be cleared by event AD caching successful. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmOnlineADqueryfailed |
1.3.6.1.4.1.177.15.2.65538 |
Failed to execute AD query. Suggested action - confirm that AD is network reachable, check the AD configuration as well as AD access credentials. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUserloggedin |
1.3.6.1.4.1.177.15.2.65540 |
New user 'username' logged in from 'ip address'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUserloginfailed |
1.3.6.1.4.1.177.15.2.65541 |
User 'username' login failed from 'ip' at 'time'. This alarm will be cleared by event User logged in. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADUnreachable |
1.3.6.1.4.1.177.15.2.65542 |
Either AD is network unreachable, or the AD credentials are invalid. This alarm will be cleared by 'AD Reachable' event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADReachable |
1.3.6.1.4.1.177.15.2.65543 |
Active directory is now reachable. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADcachingsuccessful |
1.3.6.1.4.1.177.15.2.65544 |
AD caching was successful. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADbackupfailed |
1.3.6.1.4.1.177.15.2.65545 |
Failed to backup cached values from AD to storage device. Either the storage device is not present, or it is full. Contact Sonus TAC for further assistance. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADsuccessfullybackedup |
1.3.6.1.4.1.177.15.2.65546 |
Successful backup of cached values from AD to storage device. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADcachetruncated |
1.3.6.1.4.1.177.15.2.65547 |
AD Cache is truncated, AD cache results have exceeded the maximum cache size. Consider caching only the required attributes. If the query is not found in cache, Online query will be performed, while affecting performance. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRADIUSServerUnreachable |
1.3.6.1.4.1.177.15.2.65548 |
Either the RADIUS server is network unreachable, the configuration is incorrect, or due to service impacting change. Suggested action - check shared secret, listening port, RADIUS server IP. This alarm will be cleared by 'RADIUS Reachable' event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRADIUSReachable |
1.3.6.1.4.1.177.15.2.65549 |
RADIUS server is online. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCDRloggingfailed |
1.3.6.1.4.1.177.15.2.65550 |
Sonus SBC failed to send CDR to RADIUS based accounting server. Either the server is network unreachable, or the configuration is incorrect. Suggested action - check shared secret, listening port, RADIUS server IP. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCDRbackupfailed |
1.3.6.1.4.1.177.15.2.65551 |
Sonus SBC failed to backup CDR in local file. Either running with low disk space or CDR backup maximum limit is crossed. Suggested action - Free up the disk space or save the CDR Queued file for future reference. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUserpasswordchangefailed |
1.3.6.1.4.1.177.15.2.65554 |
Password change attempted by 'username' from 'ip address' failed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUseraccountdisabled |
1.3.6.1.4.1.177.15.2.65555 |
Account has been disabled by 'username' from 'ip address'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUseraccountactivated |
1.3.6.1.4.1.177.15.2.65556 |
Account has been activated by 'username' from 'ip address'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUserloginblocked |
1.3.6.1.4.1.177.15.2.65558 |
User attempting to log in from 'ip' blocked due to excessive incorrect login attempts. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUserloginunblocked |
1.3.6.1.4.1.177.15.2.65559 |
User login is unblocked. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUserpasswordexpired |
1.3.6.1.4.1.177.15.2.65560 |
Password has expired. User 'username' logging in from 'ip' password is expired. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADMaximumThreadsExceeded |
1.3.6.1.4.1.177.15.2.65561 |
AD has reached maximum threads. Please inform your service representative. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmADcachingtimedout |
1.3.6.1.4.1.177.15.2.65562 |
Timed out caching attributes due to lack of response from AD. Suggested action - try again later. The SBC will attempt to load the last successful cache from backup. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmInvalidCardIDEEPROMData |
1.3.6.1.4.1.177.15.2.131073 |
A Card was detected with invalid Card ID EEPROM contents (failed CRC-CCITT check). Suggested action - provide the entire alarm message including the numbers at the end to Sonus TAC for further assistance. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCardHealthCheckFailed |
1.3.6.1.4.1.177.15.2.131074 |
During Line Card activation, a Card Fault was detected after power was applied to the card. The Card will remain out-of-service. Suggested action - reboot system. If issue persists, contact Sonus TAC with the alarm information. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCardnotSupported |
1.3.6.1.4.1.177.15.2.131075 |
A Card was detected which can be identified, but the Sonus SBC system software is unable to support. The Card will remain out-of-service. Suggested action - reboot system. If issue persists, contact Sonus TAC with the alarm information. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPowerSupplyoutputfailure |
1.3.6.1.4.1.177.15.2.131078 |
A Power Supply module has indicated a failure of output power. The Sonus SBC System has lost Power Supply redundancy. Suggested action - Verify that the PS is functioning properly. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSingleFanfailure |
1.3.6.1.4.1.177.15.2.131079 |
Check the System tab to find the Fan ID of the failed fan. Contact Sonus TAC with this information. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmMultipleFanFailures |
1.3.6.1.4.1.177.15.2.131080 |
Check the System tab to find the Fan ID's of the failed fans. Contact Sonus TAC with this information. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSystemTemperatureWarm |
1.3.6.1.4.1.177.15.2.131081 |
The temperature sensors have indicated that the system is running warm (55 degrees C threshold). |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSystemTemperatureWarmCleared |
1.3.6.1.4.1.177.15.2.131082 |
The temperature sensors have indicated that the system is no longer running warm (55 degrees C threshold). This event clears the 'System Temperature Warm' Alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSystemTemperatureHot |
1.3.6.1.4.1.177.15.2.131083 |
The temperature sensors have indicated that system is running hot (65 degrees C threshold). |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSystemTemperatureHotCleared |
1.3.6.1.4.1.177.15.2.131084 |
The temperature sensors have indicated that the system is no longer running hot (65 degrees C threshold). This event clears the 'System Temperature Hot' Alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLicensesexpired |
1.3.6.1.4.1.177.15.2.196609 |
License of the node has expired, all the licensed features would fail to work. Contact Sonus Enterprise Sales. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLicenseexpiresin2weeks |
1.3.6.1.4.1.177.15.2.196610 |
License of the node will expire in 2 weeks. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNewLicenseapplied |
1.3.6.1.4.1.177.15.2.196611 |
New License is applied on the node. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedtoApplyLicense |
1.3.6.1.4.1.177.15.2.196612 |
Either an invalid key is used, or the license key applies to a different node, or the license key expiry is past the present date. Contact Sonus Sales to obtain a new license. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedtoacquirelicense |
1.3.6.1.4.1.177.15.2.196613 |
License(s) for TDM/SIP/SBA/Transcoding/AD have exhausted or TDM/SIP/SBA/Transcoding/AD is not licensed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLicensedDS1portsexceedsinstalledports |
1.3.6.1.4.1.177.15.2.196614 |
The alarm is generated when the license key applied has more DS1 ports licensed than are installed in the system. The number of BRI ports installed will get activated. As a fix, obtain a license with correct number of DS1 ports. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLicensedBRIportsexceedsinstalledports |
1.3.6.1.4.1.177.15.2.196615 |
The alarm is generated when the license key applied has more BRI ports licensed than are installed in the system. The number of BRI ports installed will get activated. As a fix, obtain a license with correct number of BRI ports. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLicensedFXSportsexceedsinstalledports |
1.3.6.1.4.1.177.15.2.196616 |
The alarm is generated when the license key applied has more FXS ports licensed than are installed in the system. The number of FXS ports installed will get activated. As a fix, obtain a license with correct number of FXS ports. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLicensedFXOportsexceedsinstalledports |
1.3.6.1.4.1.177.15.2.196617 |
The alarm is generated when the license key applied has more FXO ports licensed than are installed in the system. The number of FXO ports installed will get activated. As a fix, obtain a license with correct number of FXO ports. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMUnreachable |
1.3.6.1.4.1.177.15.2.327681 |
ASM system can not be reached, system is down. Check whether the ASM is rebooting. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmClearASMUnreachable |
1.3.6.1.4.1.177.15.2.327682 |
Clears alarm 'ASM Unreachable'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMFailureRecovered |
1.3.6.1.4.1.177.15.2.327683 |
ASM system was previously unreachable, but has come up. This alarm doesn't autoclear so the user can investigate the cause, but the system should be working correctly now. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMServicesNotRunning |
1.3.6.1.4.1.177.15.2.327684 |
ASM services are not running, calls through the ASM cannot be placed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMServicesRestarted |
1.3.6.1.4.1.177.15.2.327686 |
ASM Services was previously stopped, but has started. This alarm doesn't autoclear so the user can investigate the cause, but ASM Services should be working correctly now. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMServiceRestartFailed |
1.3.6.1.4.1.177.15.2.327687 |
The system attempted to restart a failed service on the ASM, service did not start successfully. User interaction is required. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMSystemStarted |
1.3.6.1.4.1.177.15.2.327688 |
This event is set when the SBA communication system is first established, and usually indicates that the Application Solution Module (ASM) has finished booting. It should come up at system startup, it may come again if the ASM hardware is rebooted. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMSystemShuttingdown |
1.3.6.1.4.1.177.15.2.327689 |
A planned or deliberate shut down is taking place on the Application Solution Module (ASM). |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmEthernetLinkDown |
1.3.6.1.4.1.177.15.2.327690 |
Ethernet port specified has lost link. Source Instance: Eth0/Eth1 via SBA Monitor. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmEthernetLinkUp |
1.3.6.1.4.1.177.15.2.327691 |
Ethernet port specific has recovered link. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMSBCIPSubnetMismatch |
1.3.6.1.4.1.177.15.2.327692 |
The ASM and Sonus SBC IP interfaces are in different subnets and cannot communicate. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMSBCIPSubnetMatch |
1.3.6.1.4.1.177.15.2.327693 |
The ASM and Sonus SBC IP interfaces are in the same subnet and can now communicate. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMQoESQLdatabaseisunreachable |
1.3.6.1.4.1.177.15.2.327694 |
The QoE database is unreachable from ASM, make sure the Lync Server 2013 is deployed and Monitoring database is running |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMSBCCACUpdatefailed |
1.3.6.1.4.1.177.15.2.327697 |
The ASM hasn't been able to apply the CAC update. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMSBCCACUpdateapplied |
1.3.6.1.4.1.177.15.2.327698 |
ASM-SBC CAC Update applied. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmASMdriveNFSmountfailure |
1.3.6.1.4.1.177.15.2.327700 |
NFS mounting of ASM drive failed, make sure ASM module is up and NFS service is running on the ASM module |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRoutetemporarilydisabled |
1.3.6.1.4.1.177.15.2.458757 |
Route temporarily disabled due to signaling group(s) down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRouteenabled |
1.3.6.1.4.1.177.15.2.458758 |
Route enabled as the signaling group is up. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmChannelisinservice |
1.3.6.1.4.1.177.15.2.524289 |
Channel is up and is in service. This clears the 'Channel out of service' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmChannelisoutofservice |
1.3.6.1.4.1.177.15.2.524290 |
Channel Out Of Service Alarm. This alarm is automatically cleared when Channel is in service. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmEmergencyCallAttempted |
1.3.6.1.4.1.177.15.2.524291 |
Emergency Call is Attempted from Calling Number, Calling Extension, Caller IP address. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmEmergencyCallCompleted |
1.3.6.1.4.1.177.15.2.524292 |
Emergency Call Alarm will be cleared after expiry time in emergency status table. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSGDrained |
1.3.6.1.4.1.177.15.2.524296 |
SG 'rowID' set to Drain Mode, all channels are idle |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPServerNotResponding |
1.3.6.1.4.1.177.15.2.589825 |
SIP server has failed to respond and has been taken out of service. This alarm will be cleared by the event 'SIP server became responsive'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSignalingGroupTakenoutofService |
1.3.6.1.4.1.177.15.2.589826 |
All servers in SG have failed. This alarm will be cleared by 'SIP Signaling group enabled' event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSignalingGroupDisabled |
1.3.6.1.4.1.177.15.2.589827 |
Configuration action has changed this Signaling Group from Enabled to Disabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSServerHandshakeFailure |
1.3.6.1.4.1.177.15.2.589828 |
TLS server handshake failed with alert code. Action: Refer to Error Alerts in RFC 5246 for the problem. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSHandshakeInactivityTimeoutFailure |
1.3.6.1.4.1.177.15.2.589829 |
Handshake failed due to no response from peer within specified timeout. Action: Increase the Handshake Inactivity Timeout in TLS Profile. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPclusterwentdown |
1.3.6.1.4.1.177.15.2.589832 |
SIP cluster went down. This is due to all the servers in the clusters being unresponsive. This alarm will be cleared by the event 'SIP Cluster Enabled'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPClusterEnabled |
1.3.6.1.4.1.177.15.2.589833 |
SIP cluster enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPSignalingGroupDNSFailure |
1.3.6.1.4.1.177.15.2.589835 |
Failed to resolve the FQDN entries in the SIP Signaling Group. Suggested action - confirm the FQDNs, and confirm DNS access. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPSignalingGroupFQDNResolved |
1.3.6.1.4.1.177.15.2.589836 |
Successfully resolved the FQDN of the SIP Signaling group. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPServerDNSFailure |
1.3.6.1.4.1.177.15.2.589837 |
Failed to resolve the SIP server FQDN entries in the SIP Server table. Suggested action - check the FQDN syntax. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPServerFQDNResolved |
1.3.6.1.4.1.177.15.2.589838 |
SIP Server config FQDN resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPCallSessionDNSFailure |
1.3.6.1.4.1.177.15.2.589839 |
Failed to resolve an FQDN with DNS server during a SIP call session. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSessionorOtherResourceLeak |
1.3.6.1.4.1.177.15.2.589841 |
SIP performs self-check for leaks. Please enable logging for sip and issue 'show resources' command. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedtoBindtoNetworkInterface |
1.3.6.1.4.1.177.15.2.589842 |
Failed to bind to network interface due to dynamic IP address not available. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPRegisterServerNotResponding |
1.3.6.1.4.1.177.15.2.589844 |
SIP Register server has failed to respond. This alarm will be cleared by the event 'SIP Register server became responsive'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmQoENotifyMessageResponseWasNotSuccessful |
1.3.6.1.4.1.177.15.2.589848 |
QoE Notify Message received a no response or a failed response. This alarm will be cleared by the event 'QoE Notify Message received a successful response'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSystemOverloadDetected |
1.3.6.1.4.1.177.15.2.589850 |
System processing is overloaded |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSystemOverloadCleared |
1.3.6.1.4.1.177.15.2.589851 |
System processing resumes normal operation, overload cleared |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmMaximumNumberofSIPSessionsReached |
1.3.6.1.4.1.177.15.2.589852 |
The maximum number of SIP sessions (calls/register/subscribe) has been reached on the signaling group. Increase the number of SIP Channels for the signaling group. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmErrorresolvingSRVrecord |
1.3.6.1.4.1.177.15.2.589854 |
Failed to execute SRV record query. Suggested action - confirm that DNS server network is reachable, check SRV and DNS server configuration. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSRVrecordresolved |
1.3.6.1.4.1.177.15.2.589855 |
DNS server returned valid SRV record(s). |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSHandshakeNegotiationStartFailure |
1.3.6.1.4.1.177.15.2.589856 |
Handshake failed due to start with invalid certificate. Action: Import a valid signed Sonus SBC Certificate on local and/or remote gateway. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSHandshakeNegotiationStartSuccessful |
1.3.6.1.4.1.177.15.2.589857 |
Handshake response was started with valid certificate on local and remote gateway. This event clears the 'SIP-TLS Handshake Negotiation Start Failure' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmMaximumsupportedSIPSGsreached |
1.3.6.1.4.1.177.15.2.589858 |
SIP signaling group Count Reached maximum Supported Limit. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmMaximumsupportedSIPSGscleared |
1.3.6.1.4.1.177.15.2.589859 |
SIP signaling group Count is under the maximum Supported |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmMaximumSIPCallSessionsreached |
1.3.6.1.4.1.177.15.2.589862 |
Number of SIP Call Sessions is over the system capacity |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmMaximumSIPCallSessionscleared |
1.3.6.1.4.1.177.15.2.589863 |
Number of SIP Call Sessions is under the system capacity |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSClientHandshakeFailure |
1.3.6.1.4.1.177.15.2.589868 |
TLS client handshake failed with alert code. Action: Refer to Error Alerts in RFC 5246 for the problem. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSHandshakeInactivityTimeoutCleared |
1.3.6.1.4.1.177.15.2.589869 |
Handshake response was received within specified timeout. This event clears the 'SIP-TLS Handshake Inactivity Timeout Failure' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSServerHandshakeFailureCleared |
1.3.6.1.4.1.177.15.2.589870 |
Handshake failure error alert condition was cleared. This event clears the 'SIP-TLS Server Handshake Failure' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPTLSClientHandshakeFailureCleared |
1.3.6.1.4.1.177.15.2.589871 |
Handshake failure error alert condition was cleared. This event clears the 'SIP-TLS Client Handshake Failure' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSkypeLyncPresenceServerResponseFailure |
1.3.6.1.4.1.177.15.2.589872 |
A Presence Publish Request has been sent to the configured Lync Presence Front End and has received no response or a failed response. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSIPRequestfromUntrustedIP |
1.3.6.1.4.1.177.15.2.589874 |
An INVITE message was received from a host without a matching Federated IP |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmMaximumNumberofSkypeLyncPresenceSessionsReached |
1.3.6.1.4.1.177.15.2.589877 |
The maximum number of 500 concurrent SIP Publish sessions for Presence has been reached. Skype/Lync Presence processing will be suspended until the number of concurrent sessions drops below 500 limit. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDChanneldown |
1.3.6.1.4.1.177.15.2.655361 |
The D-channel(layer 2) is out of service. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDChannelup |
1.3.6.1.4.1.177.15.2.655362 |
The D-channel(layer 2) is in service. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortdisabledbyoperator |
1.3.6.1.4.1.177.15.2.720897 |
Port is placed Out of Service by operator. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortenabledbyoperator |
1.3.6.1.4.1.177.15.2.720898 |
Port is placed back in Service by operator. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDS1LoopbackEnter |
1.3.6.1.4.1.177.15.2.720899 |
The physical layer is in loopback state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDS1LoopbackExit |
1.3.6.1.4.1.177.15.2.720900 |
The physical layer is out of loopback state. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRedAlarmLossofSignal |
1.3.6.1.4.1.177.15.2.720901 |
The physical layer has detected a RED (LOS) alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRedAlarmLossofFrame |
1.3.6.1.4.1.177.15.2.720903 |
The physical layer has detected a Red (LOF) alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRedAlarmLossofFramecleared |
1.3.6.1.4.1.177.15.2.720904 |
The physical layer RED alarm (LOF) is cleared. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmBlueAlarm |
1.3.6.1.4.1.177.15.2.720905 |
The physical layer has detected a BLUE alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmBlueAlarmCleared |
1.3.6.1.4.1.177.15.2.720906 |
The physical layer BLUE alarm is cleared. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmYellowAlarm |
1.3.6.1.4.1.177.15.2.720907 |
The physical layer has detected a YELLOW alarm |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmYellowAlarmCleared |
1.3.6.1.4.1.177.15.2.720908 |
The physical layer YELLOW alarm is cleared. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortdisabledasportnotfoundonDS1 |
1.3.6.1.4.1.177.15.2.720909 |
Port is now marked as disabled because the corresponding port was not present on the DS1 physical hardware. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmClockrecoveryswitchedtofreerunclock |
1.3.6.1.4.1.177.15.2.720912 |
System has switched over to QF free-run clock as both primary/secondary recovery clocks are invalid. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLinecardnotdetected |
1.3.6.1.4.1.177.15.2.720914 |
Line card not detected. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLinecarddetected |
1.3.6.1.4.1.177.15.2.720915 |
Line card is detected. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLayer1down |
1.3.6.1.4.1.177.15.2.720918 |
The physical layer has detected layer 1 down due to state conditions that results in nonoperational state of the BRI port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLayer1up |
1.3.6.1.4.1.177.15.2.720919 |
The physical layer 1 down alarm is cleared with operational state of the BRI port. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortdisabledasportnotfoundonanalogcard |
1.3.6.1.4.1.177.15.2.720920 |
Port is now marked as disabled because the corresponding port was not present on the analog physical hardware. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortstatusdowndetected |
1.3.6.1.4.1.177.15.2.720923 |
Line down condition detected due to no battery. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortstatusup |
1.3.6.1.4.1.177.15.2.720924 |
Line down condition is cleared. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortdisabledasportnotfoundonBRI |
1.3.6.1.4.1.177.15.2.720925 |
Port is now marked as disabled because the corresponding port was not present on the BRI physical hardware. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSystemnotoperational |
1.3.6.1.4.1.177.15.2.720926 |
System not operational because DSP cannot be initialized. Contact Sonus TAC with the information in this alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDS1syncfailure |
1.3.6.1.4.1.177.15.2.720927 |
DS1 sync failure could be due to mismatching line configuration. Suggested Action: Disable 'Admin State' of unused ports to avoid performance impact. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDS1syncfailurecleared |
1.3.6.1.4.1.177.15.2.720928 |
DS1 sync failure cleared. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDSPnotcomingup |
1.3.6.1.4.1.177.15.2.786433 |
This alarm will be generated if a DSP cannot be initialized. If the DSP does not come up, contact Sonus TAC with the information in this alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDSPreset |
1.3.6.1.4.1.177.15.2.786434 |
This alarm will be generated if a DSP encounters a fatal error condition and has to be reinitialized. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDSPCardisUP |
1.3.6.1.4.1.177.15.2.786435 |
This event will clear the 'DSP not coming up' and 'DSP reset' alarms. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDSPChannelFailure |
1.3.6.1.4.1.177.15.2.786436 |
This event will be generated if a DSP channel encounters a fatal error condition and has to be closed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRTPRTCPPortRangeInvalid |
1.3.6.1.4.1.177.15.2.786437 |
This alarm is generated if a RTP/RTCP port range is found to be invalid. This condition should be resolved by reconfiguring the RTP/RTCP Port Range under Media System Configuration. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRTPRTCPPortRangeInvalidCleared |
1.3.6.1.4.1.177.15.2.786438 |
This event will clear the 'RTP/RTCP Port Range Invalid' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTLSOwnServerCertificatewillExpire |
1.3.6.1.4.1.177.15.2.851969 |
CommonName: 'name' StartDate: 'startdate' EndDate: 'enddata' will expire in a window time. Action: Generate, Export CSR and Import a new signed certificate. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTLSOwnServerCertificatehasExpired |
1.3.6.1.4.1.177.15.2.851970 |
CommonName: 'name' StartDate: 'startdate' EndDate: 'enddata' has expired. Action: Generate, Export CSR and Import a new signed certificate. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNewandValidTLSOwnServerCertificateDetected |
1.3.6.1.4.1.177.15.2.851973 |
Imported and validated common name: 'name' StartDate: 'start date' EndDate: 'end date'. This event clears the Server Certificate Expiring, Expired and Missing alarms. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTLSTrustedCertificateAuthoritywillExpire |
1.3.6.1.4.1.177.15.2.851974 |
CommonName: 'name' StartDate: 'start date' EndDate: 'end date' will expire in a window time. Action: Obtain and Import a new valid certificate from the CA vendor. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTLSTrustedCertificateAuthorityhasExpired |
1.3.6.1.4.1.177.15.2.851975 |
'CommonName: 'name' StartDate: 'start date' EndDate: 'end date' has expired. Action: Obtain and Import a new valid certificate from the CA vendor. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTLSTrustedCertificateAuthoritywasDeleted |
1.3.6.1.4.1.177.15.2.851976 |
The Trusted Certificate Authority is successfully deleted due to the expired or expiring soon validity status. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTLSOwnServerCertificateExpiryNotice |
1.3.6.1.4.1.177.15.2.851977 |
CommonName: 'name' StartDate: 'start date' EndDate: 'end date' will expire in a window time. Action: Obtain and Import a new valid certificate from the CA vendor. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTLSTrustedCertificateAuthorityExpiryNotice |
1.3.6.1.4.1.177.15.2.851978 |
CommonName: 'name' StartDate: 'start date' EndDate: 'end date' has expired. Action: Obtain and Import a new valid certificate from the CA vendor. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmBMPTLSHandshakeAlertFailure |
1.3.6.1.4.1.177.15.2.917506 |
This alarm will be generated if TLS Connection failed with an Alert. The connection associated with a TLS Connection ID is aborted. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmBMPTLSHandshakeInactivityTimeoutFailure |
1.3.6.1.4.1.177.15.2.917507 |
This alarm will be generated if there was long period of inactivity during exchange of handshake messages for an associated TLS Connection ID. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmInterfaceoperdown |
1.3.6.1.4.1.177.15.2.983041 |
Occurs when an Ethernet port (of ports 1, 2, 3 and 4) is operationally down (e.g. cable unplugged, mismatched speed/duplexity settings) and if administrative state is enabled. Is generated only on Sonus SBC 2000 platform. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmInterfaceoperup |
1.3.6.1.4.1.177.15.2.983042 |
Is generated when an Ethernet port (of ports 1, 2, 3 and 4) becomes operationally up. This event automatically clears the 'Interface oper down' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmInterfaceadminup |
1.3.6.1.4.1.177.15.2.983043 |
Is generated when the administrative state of the Logical Interface is configured to be enabled. Is applicable to Sonus SBC 2000 platform only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmInterfaceadmindown |
1.3.6.1.4.1.177.15.2.983044 |
Is generated when the administrative state of the Logical Interface is configured to be disabled. Is applicable to Sonus SBC 2000 platform only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmAdminPortoperdown |
1.3.6.1.4.1.177.15.2.983045 |
Is generated when the Admin Port is operationally down (e.g. cable unplugged, mismatched duplex/speed settings). Is applicable to Sonus SBC 2000 platform only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmAdminPortoperup |
1.3.6.1.4.1.177.15.2.983046 |
Is generated with the port becomes operational after being in an *Admin port oper down* state. Is applicable to Sonus SBC 2000 platform only |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortoperdown |
1.3.6.1.4.1.177.15.2.983047 |
This event is generated when the port is operationally down.It is generated for Sonus SBC 1000 only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmRIPlicensenotenabled |
1.3.6.1.4.1.177.15.2.983048 |
RIP feature license is not enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmOSPFlicensenotenabled |
1.3.6.1.4.1.177.15.2.983049 |
OSPF feature license is not enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLinkMonitorPeerDown |
1.3.6.1.4.1.177.15.2.983050 |
Connection to the monitored host or gateway is down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmLinkMonitorPeerReady |
1.3.6.1.4.1.177.15.2.983051 |
Connection to the monitored host or gateway is established. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTunnellinklost |
1.3.6.1.4.1.177.15.2.983054 |
Tunnel lost communication with the peer. This alarm will be cleared by event 'Tunnel link restored'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTunnellinkrestored |
1.3.6.1.4.1.177.15.2.983055 |
Tunnel is successfully established with the peer |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmIPseclicensenotenabled |
1.3.6.1.4.1.177.15.2.983056 |
IPsec feature license is not enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNegotiatedDuplexityHalf |
1.3.6.1.4.1.177.15.2.983057 |
Port negotiated duplexity is half. This degrades the performance. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNegotiatedDuplexityFull |
1.3.6.1.4.1.177.15.2.983058 |
Port negotiated duplexity is back to full. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPreferredlinkdown |
1.3.6.1.4.1.177.15.2.983059 |
This event is generated when the preferred link is down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPreferredlinkready |
1.3.6.1.4.1.177.15.2.983060 |
This event is generated when the the preferred link is ready for service. This event automatically clears the 'preferred Link down' alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTunnelnotificationfailure |
1.3.6.1.4.1.177.15.2.983061 |
Tunnel negotiation failed. Suggested Action: Look up the 'Failure Reason' attribute details for the Source in the IPsec Tunnel Table. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTunnellocalsubnetsarenonnegotiable |
1.3.6.1.4.1.177.15.2.983062 |
This event is generated when one or more local subnet failed negotiation as result of peer config mismatch. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmTunnelremotesubnetsarenonnegotiable |
1.3.6.1.4.1.177.15.2.983063 |
This event is generated when one or more remote subnet failed negotiation as result of peer config mismatch. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortStateLearning |
1.3.6.1.4.1.177.15.2.983064 |
This event is generated when a Port State is Learning in a Multiple Spanning Tree Instance. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortStateForwarding |
1.3.6.1.4.1.177.15.2.983065 |
This event is generated when a Port State is Forwarding in a Multiple Spanning Tree Instance. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPortStateDiscarding |
1.3.6.1.4.1.177.15.2.983066 |
This event is generated when a Port State is Discarding in a Multiple Spanning Tree Instance. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPacketCaptureStarted |
1.3.6.1.4.1.177.15.2.983067 |
Packet capture has started. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPacketCaptureStopped |
1.3.6.1.4.1.177.15.2.983068 |
Packet capture has stopped due to 'reason'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmApplicationServicerestarted |
1.3.6.1.4.1.177.15.2.1048577 |
A Sonus SBC Application service was restarted. Contact Sonus TAC with the information in this alarm and all core files present on the system. These can be found in Diagnostics->Restart Report under the 'Core Files' tab. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmActivepartitionswitched |
1.3.6.1.4.1.177.15.2.1048578 |
System detected a problem during previous boot cycle, active partition has switched automatically. Suggested action - backup the configuration and re-apply the upgrade to the currently inactive partition. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedtomountpartition |
1.3.6.1.4.1.177.15.2.1048579 |
Mounting failed for partition 'number'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedtosetactivepartition |
1.3.6.1.4.1.177.15.2.1048580 |
Failed to set active partition. Contact Sonus TAC with the information in this alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmBootparametermismatchdetected |
1.3.6.1.4.1.177.15.2.1048582 |
Boot parameter mismatch was detected.Attempting to auto repair. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedPoweronTSItest |
1.3.6.1.4.1.177.15.2.1048589 |
Power-on self test failure. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedtomountUSBstoragedevice |
1.3.6.1.4.1.177.15.2.1048595 |
SBC discovered USB storage. SBC can mount flash drives formatted with FAT32 file system only. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmUSBstoragedevicedisconnected |
1.3.6.1.4.1.177.15.2.1048597 |
USB storge device is disconnected. This alarm will be cleared when USB drive is connected. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCriticalapplicationcrash |
1.3.6.1.4.1.177.15.2.1048598 |
A Critical Sonus SBC application has crashed, and the system will be restarted. Contact Sonus TAC with the information in this alarm and all core files present on the system. These can be found in Diagnostics->Restart Report under the 'Core Files' tab. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmOlderfirmwaredetected |
1.3.6.1.4.1.177.15.2.1048599 |
A USB firmware update is available. To perform upgrade, please first load SW release v4.1.1 |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmAutoConfigurationsuccessful |
1.3.6.1.4.1.177.15.2.1048600 |
Auto Configuration successful after receiving SIP NOTIFY message. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmAutoConfigurationfailed |
1.3.6.1.4.1.177.15.2.1048601 |
Failed to perform Auto Configuration after receiving SIP NOTIFY message. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSoftwareUpdateinprogress |
1.3.6.1.4.1.177.15.2.1048602 |
Current SIP NOTIFY message cannot be processed as software update is in progress |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNodeReboot |
1.3.6.1.4.1.177.15.2.1048603 |
Node Reboot requested by user 'Username' from 'IP address'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFactoryDefault |
1.3.6.1.4.1.177.15.2.1048604 |
Full factory default requested by user 'Username' from 'IP address'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNoresponse |
1.3.6.1.4.1.177.15.2.1114113 |
No response to seizure. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNodialtone |
1.3.6.1.4.1.177.15.2.1114116 |
Event of off-hook did not produce dial tone as expected. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCASlicensenotenabled |
1.3.6.1.4.1.177.15.2.1114118 |
Call attempted but CAS feature is not enabled. This alarm is cleared by CAS license enabled event. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCASlicenseenabled |
1.3.6.1.4.1.177.15.2.1114119 |
License manager notify CAS that license is enabled. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmWinkReceived |
1.3.6.1.4.1.177.15.2.1114120 |
Wink failure had occurred, but wink is received now. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDialToneReceived |
1.3.6.1.4.1.177.15.2.1114121 |
No Dial Tone was received, but Dial Tone is received now. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmResponseReceived |
1.3.6.1.4.1.177.15.2.1114122 |
No Response to seizure was received, but Response is received now. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmInvalidcharactersincallednumber |
1.3.6.1.4.1.177.15.2.1114124 |
Invalid character(s) removed, correct issue and delete warning. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCASR2CDBiterror |
1.3.6.1.4.1.177.15.2.1114126 |
CAS-R2 CD-Bits are mismatched on the span, this alarm is cleared when all channels match. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCASR2CDBiterrorclear |
1.3.6.1.4.1.177.15.2.1114127 |
CAS-R2 CD-Bits now match on this span for all channels. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNetworkGlareoccured |
1.3.6.1.4.1.177.15.2.1114128 |
Network glare occured on this interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmConfigvalidationfailure |
1.3.6.1.4.1.177.15.2.1179649 |
Config validation failure during startup. Please check the configuration. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmNewerConfigLoaded |
1.3.6.1.4.1.177.15.2.1179650 |
Configuration loaded from newer release than currently running release. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPassworddecryptionfailed |
1.3.6.1.4.1.177.15.2.1179651 |
Password decryption failed on configuration import operation. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmPartialFactoryDefault |
1.3.6.1.4.1.177.15.2.1179652 |
Partial 'factory default or configuration import' requested by 'Username' from 'IP address'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmConfigurationRestore |
1.3.6.1.4.1.177.15.2.1179653 |
Configuration restore requested by 'Username' from 'IP address'. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmSGChannelUsagebelowTCAthreshold |
1.3.6.1.4.1.177.15.2.1245186 |
Signaling Group channel usage fell below configured TCA threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmDSPUsagebelowTCAthreshold |
1.3.6.1.4.1.177.15.2.1245192 |
DSP usage fell below configured TCA threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmCPUUsagebelowTCAthreshold |
1.3.6.1.4.1.177.15.2.1245194 |
CPU usage fell below configured TCA threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFailedtoresolveFQDN |
1.3.6.1.4.1.177.15.2.1310721 |
Failed to resolve IP address. Ensure that FQDN and DNS server is configured properly. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uxAlmFQDNresolved |
1.3.6.1.4.1.177.15.2.1310722 |
IP address successfully resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|