USR-VHA-MIB

File: USR-VHA-MIB.mib (105752 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC USR-DEFINITIONS-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
NOTIFICATION-TYPE Integer32 IpAddress
Counter32 Gauge32 Unsigned32
RowStatus DisplayString common
UsrConfigStatus Time1970 Time1900
UsrSecretDisplay UsrRegID UsrSpecialU32

Defined Types

UsrVHAConnStatsEntry  
SEQUENCE    
  usrVHAConnSessionIndex Integer32
  usrVHAConnSessionID Unsigned32
  usrVHAConnRNAddr IpAddress
  usrVHAConnMNID Integer32
  usrVHAConnIMSI DisplayString
  usrVHAConnLifetimeGranted Integer32
  usrVHAConnLifetimeRemaining Integer32
  usrVHAConnGREPktsRcvd Counter32
  usrVHAConnGREPktsTrans Counter32
  usrVHAConnGREBytesRcvd Counter32
  usrVHAConnGREBytesTrans Counter32
  usrVHAConnSessionStatus INTEGER
  usrVHAConnHomeAddr IpAddress
  usrVHAUserName DisplayString
  usrVHACallType INTEGER
  usrVHAPPPResetTime Time1900
  usrVHAPPPSetupTime Time1900
  usrVHAPPPIdletimeRemaining Integer32
  usrVHASessionDuration Unsigned32
  usrVHAServiceOption INTEGER

UsrVHAAccessNetworkIdentifierEntry  
SEQUENCE    
  usrVHAAccessNetworkIdentifier OCTET STRING Size(5)
  usrVHAAccessNetworkIpAddr IpAddress

UsrVHASecurConfigEntry  
SEQUENCE    
  usrVHASecurSAIndex Integer32
  usrVHASecurRNAddr IpAddress
  usrVHASecurSPI UsrSpecialU32
  usrVHASecurSharedSecretKey UsrSecretDisplay
  usrVHASecurTimeDrift Integer32
  usrVHASecurStatus RowStatus
  usrVHASecurAuthFlag INTEGER
  usrVHAZeroPadSecretEntry INTEGER

UsrVHASecurViolationEntry  
SEQUENCE    
  usrVHASecurViolatorTableIndex Integer32
  usrVHASecurViolatorAddress IpAddress
  usrVHASecurViolationCounter Counter32
  usrVHASecurRecentViolationSPI UsrSpecialU32
  usrVHASecurRecentViolationTime Time1900
  usrVHASecurRecentViolationIDLow UsrRegID
  usrVHASecurRecentViolationIDHigh UsrRegID
  usrVHASecurRecentViolationReason INTEGER

UsrVHAServiceOptionStatsEntry  
SEQUENCE    
  usrVHAServiceOptionStatsTableIndex Integer32
  usrVHAServiceOptionRegReqRcvd Counter32
  usrVHAServiceOptionRegRepAccept Counter32
  usrVHAServiceOptionDeRegReqRcvd Counter32
  usrVHAServiceOptionDeRegRepAccept Counter32

UsrVHAIMSIStatsEntry  
SEQUENCE    
  usrVHAIMSISessionIndex Integer32
  usrVHAIMSIDecodedASCII DisplayString
  usrVHAIMSIEncodedASCII DisplayString

Defined Values

usrVHA 1.3.6.1.4.1.429.4.84
The commWorks enterprise defined MIB objects for VHA
MODULE-IDENTITY    

usrVHAConnConfig 1.3.6.1.4.1.429.4.84.1
OBJECT IDENTIFIER    

usrVHAConnStats 1.3.6.1.4.1.429.4.84.2
OBJECT IDENTIFIER    

usrVHARegReqStats 1.3.6.1.4.1.429.4.84.3
OBJECT IDENTIFIER    

usrVHARegUpdStats 1.3.6.1.4.1.429.4.84.4
OBJECT IDENTIFIER    

usrVHASecurConfig 1.3.6.1.4.1.429.4.84.5
OBJECT IDENTIFIER    

usrVHASecurViolStats 1.3.6.1.4.1.429.4.84.6
OBJECT IDENTIFIER    

usrVHAGREStats 1.3.6.1.4.1.429.4.84.7
OBJECT IDENTIFIER    

usrVHACfmConfig 1.3.6.1.4.1.429.4.84.8
OBJECT IDENTIFIER    

usrVHATraps 1.3.6.1.4.1.429.4.84.9
OBJECT IDENTIFIER    

usrVHAPM 1.3.6.1.4.1.429.4.84.10
OBJECT IDENTIFIER    

usrVHAServiceOptionStats 1.3.6.1.4.1.429.4.84.11
OBJECT IDENTIFIER    

usrVHARegTimer 1.3.6.1.4.1.429.4.84.1.1
This is the A10 connection registration Lifetime timer. The timer is started at the time of establishment of an A10 connection and updated during periodic re-registrations of the A10 connection. The A10 connection is cleared on expiry of this timer. The default value of the timer is 1800 seconds. When this value is equal to 65535, then the timer has infinite lifetime. If this value is equal to zero, then A10 connection has been released.
OBJECT-TYPE    
  Integer32 30..65534  

usrVHARegUpdateTimer 1.3.6.1.4.1.429.4.84.1.2
Number of seconds to wait for the Registration Acknowledge message from the PCF.
OBJECT-TYPE    
  Integer32 1..15  

usrVHARegUDPPort 1.3.6.1.4.1.429.4.84.1.3
UDP port number used by the RP interface to communicate with the PCF. The default value for this parameter is 699.
OBJECT-TYPE    
  Integer32 0..65535  

usrVHAServiceOption7 1.3.6.1.4.1.429.4.84.1.4
Toggle for controlling Service Option 7 on the RP interface. Obsolete: This object is no longer used.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAServiceOption15 1.3.6.1.4.1.429.4.84.1.5
Toggle for controlling Service Option 15 on the RP interface. Obsolete: This object is no longer used.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAServiceOption22 1.3.6.1.4.1.429.4.84.1.6
Toggle for controlling Service Option 22 on the RP interface. Obsolete: This object is no longer used.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAServiceOption23 1.3.6.1.4.1.429.4.84.1.7
Toggle for controlling Service Option 23 on the RP interface. Obsolete: This object is no longer used.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAServiceOption24 1.3.6.1.4.1.429.4.84.1.8
Toggle for controlling Service Option 24 on the RP interface. Obsolete: This object is no longer used.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAServiceOption25 1.3.6.1.4.1.429.4.84.1.9
Toggle for controlling Service Option 25 on the RP interface. Obsolete: This object is no longer used.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAServiceOption33 1.3.6.1.4.1.429.4.84.1.10
Toggle for controlling Service Option 33 on the RP interface. Obsolete: This object is no longer used.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAMaxSessions 1.3.6.1.4.1.429.4.84.1.11
Maximum number of active sessions that this PDSN is allowed to process on its RP interface port. This value is MAX_SIMULTANEOUS_USERS + 1 and is dependent on the component being built
OBJECT-TYPE    
  Integer32  

usrVHARegUpdateRetrans 1.3.6.1.4.1.429.4.84.1.12
Number of times to retransmit the Registration Update message if the PCF does not send a Registration Acknowledge message or a Registration Request message (with accounting related information and Lifetime set to zero). The current implementation only supports the range 1..20
OBJECT-TYPE    
  Integer32 0..65535  

usrVHAMonitorRP 1.3.6.1.4.1.429.4.84.1.13
Toggle to enable or disable monitoring of raw data over RP Interface
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAPrintDataLimit 1.3.6.1.4.1.429.4.84.1.14
Number in bytes displayed by R-P Protocol monitor
OBJECT-TYPE    
  Integer32 0..1500  

usrVHAResetStats 1.3.6.1.4.1.429.4.84.1.15
Resets VHA Statistics to zero. 1: Resets all the statistics. 2: Resets Connection statistics. 3: Resets GRE statistics. 4: Resets Registration statistics. 5: Resets Registration Denied statistics. 6: Resets Update statistics. 7: Resets Update Denied statistics. 8: Resets Security Violations statistics. **NOTE: this object is deprecated and replaced by usrVHAStatsResetTime. Behaviour: setting usrVHAResetStats to any value 1..8 will result in the same behaviour as setting usrVHAStatsResetTime to 0: All stats will be reset.
OBJECT-TYPE    
  Integer32 1..8  

usrVHAZeroPadSecret 1.3.6.1.4.1.429.4.84.1.16
This MIB Object is Deprecated
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAStatsResetTime 1.3.6.1.4.1.429.4.84.1.17
Reading: Time the VHA statistics counters were last reset. The VHA statistics are valid from usrVHAStatsResetTime until present. Resetting counters causes a discontinuity in the monotonically increasing value of counters. Management stations that sample these counters need also to sample this object so that they can know that a discontinuity occurred with respect to the previous sample. Its value is number of seconds since EPOCH. EPOCH is seconds since 00:00:00 UTC, Jan 1, 1970. Writing: Writing 0 causes update of usrVHAStatsResetTime and the VHA counters to be reset to 0: usrVHAConnStats group scalars usrVHARegReqStats group scalars usrVHARegUpdStats group scalars usrVHASecurViolStats group scalars This object replaces usrVHAResetStats
OBJECT-TYPE    
  Time1970  

usrVHAGreFragmentSize 1.3.6.1.4.1.429.4.84.1.18
Fragment size used by GRE to fragment data pkts
OBJECT-TYPE    
  Integer32 64..64000  

usrVHAGreFragmentation 1.3.6.1.4.1.429.4.84.1.19
The VHA module will use GRE fragmentation based on this flag and the GRE Fragment Size
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAEncodeIMSI 1.3.6.1.4.1.429.4.84.1.20
THis setting will determine if the Accounting feature (IMSI Encoding) for Motorola is enabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAMotg160RP 1.3.6.1.4.1.429.4.84.1.21
Toggle to enable or disable sending out DAI CVSE in RP_REG_REPLY
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHATimingWindowSize 1.3.6.1.4.1.429.4.84.1.22
The configurable parameter ranged at 1-10 seconds would utilized to control the working timing window size for the call events flow regulation for non-turbo mode
OBJECT-TYPE    
  Integer32 1..10  

usrVHARNNDynInfo 1.3.6.1.4.1.429.4.84.1.23
Allow a dynamic RNN key value to be used in place of the configured shared secret and SPI
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHARNNDynSPI 1.3.6.1.4.1.429.4.84.1.24
The dynamic SPI value obtained from the FACN
OBJECT-TYPE    
  UsrSpecialU32  

usrVHAFilterAccess 1.3.6.1.4.1.429.4.84.1.25
This is for setting the filter access for all the VHA interfaces.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

usrVHAInFilter 1.3.6.1.4.1.429.4.84.1.26
The name of the input filter for all VHA interfaces.
OBJECT-TYPE    
  DisplayString Size(0..20)  

usrVHAOutFilter 1.3.6.1.4.1.429.4.84.1.27
The name of the output filter for all VHA interfaces.
OBJECT-TYPE    
  DisplayString Size(0..20)  

usrVHASyncPPP 1.3.6.1.4.1.429.4.84.1.28
Determines whether or not the VHA module will support Sync PPP protocol (0x880B)
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHASoftBusyStatus 1.3.6.1.4.1.429.4.84.1.29
Will put the PDSN VHA interface in the SoftBusy state (ENABLE) or get the VHA out of the SoftBusy state (DISABLE)
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHATotalConnInits 1.3.6.1.4.1.429.4.84.2.1
Total number of A10/A11 connections initiated. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalConnReleas 1.3.6.1.4.1.429.4.84.2.2
Number of A10/A11 connections released since the last counter reset. usrVHATotalConnReleas is the sum of the following values: [usrVHATotalConnReleas] = [usrVHATotalRPConnDeRegistered] + [usrVHATotalConnExps] + [usrVHATotalRPConnOther] Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalConnExps 1.3.6.1.4.1.429.4.84.2.3
Total number of A10/A11 connections cleared due to expiry of Trp without receiving a periodic Registration Request with lifetime greater than zero. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalIngressCount 1.3.6.1.4.1.429.4.84.2.4
Total number of Ingress Filtering Caused Releases. Counter epoch is indicated by usrVHAStatsResetTime. Obsolete: This object is not supported.
OBJECT-TYPE    
  Counter32  

usrVHAConnStatsTable 1.3.6.1.4.1.429.4.84.2.5
A table of all existings A10/A11 connections between PCF and PDSN.
OBJECT-TYPE    
  SEQUENCE OF  
    UsrVHAConnStatsEntry

usrVHATotalRPConn 1.3.6.1.4.1.429.4.84.2.6
Total Number of RP connections Obsolete: This was a value that went up and down. A syntax of Counter32 is invalid for this behavior. This object has been replaced by usrVHASessionsCurrent.
OBJECT-TYPE    
  Counter32  

usrVHATotalRPConnDeRegistered 1.3.6.1.4.1.429.4.84.2.7
Total Number of RP connections released, due to a valid deregistration request. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalRPConnPPPLayerCmd 1.3.6.1.4.1.429.4.84.2.8
Total Number of RP connections released, cause: PPP Layer Command Counter epoch is indicated by usrVHAStatsResetTime. Obsolete: This object is not supported.
OBJECT-TYPE    
  Counter32  

usrVHATotalRPConnOther 1.3.6.1.4.1.429.4.84.2.9
Total Number of RP connections released, cause: other reasons
OBJECT-TYPE    
  Counter32  

usrVHAIMSIStatsTable 1.3.6.1.4.1.429.4.84.2.10
A table of all existings calls with their IMSI values.
OBJECT-TYPE    
  SEQUENCE OF  
    UsrVHAIMSIStatsEntry

usrVHAConnStatsEntry 1.3.6.1.4.1.429.4.84.2.5.1
An entry in the RP Connection Statistics Table. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  UsrVHAConnStatsEntry  

usrVHAConnSessionIndex 1.3.6.1.4.1.429.4.84.2.5.1.1
PDSN's RP interface can support up to 4000 sessions. This value indicates the session number assigned to the connection by the PDSN.
OBJECT-TYPE    
  Integer32 1..4000  

usrVHAConnSessionID 1.3.6.1.4.1.429.4.84.2.5.1.2
This four octet value, along with the PCF-IP- Address and the PDSN-IP-Address, identifies the A10 connection on behalf of a packet data session. This value is set to the MN-Proxy-Id assigned to a packet data session by the PCF. This Key value is also inserted in the Key field of every GRE frame containing user data sent over the A10/A11 connection.
OBJECT-TYPE    
  Unsigned32  

usrVHAConnRNAddr 1.3.6.1.4.1.429.4.84.2.5.1.3
This four octet value identifies the IP address of the PCF that terminates the A10 connection.
OBJECT-TYPE    
  IpAddress  

usrVHAConnMNID 1.3.6.1.4.1.429.4.84.2.5.1.4
This two octet field is used to differentiate multiple sessions at a mobile node. MN Connection ID is determined by the PCF.
OBJECT-TYPE    
  Integer32  

usrVHAConnIMSI 1.3.6.1.4.1.429.4.84.2.5.1.5
The International Mobile Subscriber Identifier.
OBJECT-TYPE    
  DisplayString Size(10..15)  

usrVHAConnLifetimeGranted 1.3.6.1.4.1.429.4.84.2.5.1.6
The number of seconds granted before registration is considered expired. A value of zero indicates a request for deregistration. A value of 65535 indicates infinity.
OBJECT-TYPE    
  Integer32  

usrVHAConnLifetimeRemaining 1.3.6.1.4.1.429.4.84.2.5.1.7
The number of seconds remaining before registration is considered expired.
OBJECT-TYPE    
  Integer32  

usrVHAConnGREPktsRcvd 1.3.6.1.4.1.429.4.84.2.5.1.8
The number of GRE encapsulated packets received from IP.
OBJECT-TYPE    
  Counter32  

usrVHAConnGREPktsTrans 1.3.6.1.4.1.429.4.84.2.5.1.9
The number of GRE encapsulated packets delivered to IP for transmission.
OBJECT-TYPE    
  Counter32  

usrVHAConnGREBytesRcvd 1.3.6.1.4.1.429.4.84.2.5.1.10
The number of GRE encapsulated bytes received from IP. The GRE header bytes are not counted.
OBJECT-TYPE    
  Counter32  

usrVHAConnGREBytesTrans 1.3.6.1.4.1.429.4.84.2.5.1.11
The number of GRE encapsulated bytes delivered to IP for transmission. The GRE header bytes are not counted
OBJECT-TYPE    
  Counter32  

usrVHAConnSessionStatus 1.3.6.1.4.1.429.4.84.2.5.1.12
The RP session is considered active when an Airlink Record Identifier, inside the Vendor/Organization Specific Extension of the Registration Request, is set to RP ACTIVE START.
OBJECT-TYPE    
  INTEGER dormant(1), active(2)  

usrVHAConnHomeAddr 1.3.6.1.4.1.429.4.84.2.5.1.13
Ipaddress associated with this connection
OBJECT-TYPE    
  IpAddress  

usrVHAUserName 1.3.6.1.4.1.429.4.84.2.5.1.14
User name associated with this connection
OBJECT-TYPE    
  DisplayString  

usrVHACallType 1.3.6.1.4.1.429.4.84.2.5.1.15
Call Type for this connection
OBJECT-TYPE    
  INTEGER invalid(0), simpleIP(1), mobileIP(2), proxyIP(3)  

usrVHAPPPResetTime 1.3.6.1.4.1.429.4.84.2.5.1.16
Time when the PPP was reset. This is NTP time, it will give number of seconds since Jan 1, 1900.
OBJECT-TYPE    
  Time1900  

usrVHAPPPSetupTime 1.3.6.1.4.1.429.4.84.2.5.1.17
Time when the PPP was first established This is NTP time, it will give number of seconds since Jan 1, 1900.
OBJECT-TYPE    
  Time1900  

usrVHAPPPIdletimeRemaining 1.3.6.1.4.1.429.4.84.2.5.1.18
The number of seconds remaining before PPP session is considered expired.
OBJECT-TYPE    
  Integer32  

usrVHASessionDuration 1.3.6.1.4.1.429.4.84.2.5.1.19
The duration in seconds of the current session.
OBJECT-TYPE    
  Unsigned32  

usrVHAServiceOption 1.3.6.1.4.1.429.4.84.2.5.1.20
The value of service option recieved by PDSN over A11 interface.
OBJECT-TYPE    
  INTEGER packetData(7), packetData14-4kbps(15), highSpeedPacketData-RS1fwd-RS1rev(22), highSpeedPacketData-RS1fwd-RS2rev(23), highSpeedPacketData-RS2fwd-RS1rev(24), highSpeedPacketData-RS2fwd-RS2rev(25), threeGHighSpeedPacketData(33), oneXEVDO(59)  

usrVHASessionsCurrent 1.3.6.1.4.1.429.4.84.2.11
Current number of RP sessions (sum of active and dormant)
OBJECT-TYPE    
  Gauge32  

usrVHAActiveSessionsCurrent 1.3.6.1.4.1.429.4.84.2.12
Current number of active RP sessions
OBJECT-TYPE    
  Gauge32  

usrVHAAccessNetworkIdentifierTable 1.3.6.1.4.1.429.4.84.2.13
A table of Access Network Identifiers(ANIDs) received by PDSN.
OBJECT-TYPE    
  SEQUENCE OF  
    UsrVHAAccessNetworkIdentifierEntry

usrVHAAccessNetworkIdentifierEntry 1.3.6.1.4.1.429.4.84.2.13.1
An entry in the VHA Access Network Identifier(ANID) Table.
OBJECT-TYPE    
  UsrVHAAccessNetworkIdentifierEntry  

usrVHAAccessNetworkIdentifier 1.3.6.1.4.1.429.4.84.2.13.1.1
Access Network Identifier(ANID) of the PCF received by PDSN over A11.
OBJECT-TYPE    
  OCTET STRING Size(5)  

usrVHAAccessNetworkIpAddr 1.3.6.1.4.1.429.4.84.2.13.1.2
Ipaddress of the PCF that holds this ANID
OBJECT-TYPE    
  IpAddress  

usrVHARegReqRcvd 1.3.6.1.4.1.429.4.84.3.1
Total number of RP Registration Requests received. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegRepAccept 1.3.6.1.4.1.429.4.84.3.2
Total number of Registration Replies accepted. The code information element inside the Registration Accept message is equal to zero. Counter epoch is indicated by usrVHAStatsResetTime. Obsolete: This object has been replaced by usrVHARegReqAccept
OBJECT-TYPE    
  Counter32  

usrVHADeRegReqRcvd 1.3.6.1.4.1.429.4.84.3.3
Total number of valid Registration Requests received with a Lifetime of zero (requests to deregister). Deprecated - This counter is replaced by usrVHADeRegReqAccept Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHADeRegRepAccept 1.3.6.1.4.1.429.4.84.3.4
Total number of Registration Replies accepted in response to a deregistration request. The code information element inside the Registration Accept message is equal to zero. Counter epoch is indicated by usrVHAStatsResetTime. Obsolete: This object has been replaced by usrVHADeRegReqAccept
OBJECT-TYPE    
  Counter32  

usrVHARegDenUnspecified 1.3.6.1.4.1.429.4.84.3.5
Total number of RP Registration Requests denied due to an unspecified reason. The code information element inside the Registration Accept message is equal to 128. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenAdmProhibited 1.3.6.1.4.1.429.4.84.3.6
Total number of RP Registration Requests denied due to an administrative decision. The code information element inside the Registration Accept message is equal to 129. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenNoResources 1.3.6.1.4.1.429.4.84.3.7
Total number of RP Registration Requests denied due to insufficient resources. The code information element inside the Registration Accept message is equal to 130. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenAuthFail 1.3.6.1.4.1.429.4.84.3.8
Total number of RP Registration Requests denied due to mobile node's failed authentication. The code information element inside the Registration Accept message is equal to 131. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenIDMismatch 1.3.6.1.4.1.429.4.84.3.9
Total number of RP Registration Requests denied due to an identification mismatch. The code information element inside the Registration Accept message is equal to 133. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenPoorlyFormedReq 1.3.6.1.4.1.429.4.84.3.10
Total number of RP Registration Requests denied due to a poorly formed request. The code information element inside the Registration Accept message is equal to 134. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenUnknownPDSNAddr 1.3.6.1.4.1.429.4.84.3.11
Total number of RP Registration Requests denied due to an unknown PDSN address. The code information element inside the Registration Accept message is equal to 136. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenReverseTunnelUnavail 1.3.6.1.4.1.429.4.84.3.12
Total number of RP Registration Requests denied due to unavailability of requested reverse tunnel. The code information element inside the Registration Accept message is equal to 137. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenReverseTunnelRequired 1.3.6.1.4.1.429.4.84.3.13
Total number of RP Registration Requests denied due to 'T' bit not set. This bit is part of the Flags information element inside the Registration Request message. The code information element inside the Registration Accept message is equal to 138. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegDenUnsupportedVendorID 1.3.6.1.4.1.429.4.84.3.14
Total number of RP Registration Requests denied due to an unrecognized Vendor ID field that is inside the Vendor/Organization Specific Extension information element. The code information element inside the Registration Accept message is equal to 141. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegReqDenied 1.3.6.1.4.1.429.4.84.3.15
Total number of Registration Requests denied usrVHARegReqDenied is the sum of these values: [usrVHARegReqDenied] = [usrVHARegReqInitDenied] + [usrVHAReRegReqDenied] + [usrVHADeRegReqDenied] Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegReqDiscard 1.3.6.1.4.1.429.4.84.3.16
Total number of Registration Requests from the PCF silently discarded without being processed by the PDSN Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegReqInitAccept 1.3.6.1.4.1.429.4.84.3.17
Number of Initial Registration Requests accepted from the PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegReqInitDenied 1.3.6.1.4.1.429.4.84.3.18
Number of Initial Registration Requests denied from the PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHAReRegReqAccept 1.3.6.1.4.1.429.4.84.3.19
Number of Re-Registration Requests accepted from the PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHAReRegReqDenied 1.3.6.1.4.1.429.4.84.3.20
Number of Re-Registration Requests denied from the PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHADeRegReqDenied 1.3.6.1.4.1.429.4.84.3.21
Number of De-Registration Requests denied from the PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegReqAccept 1.3.6.1.4.1.429.4.84.3.22
Total number of Registration Requests accepted from the PCF. usrVHARegReqAccept is the sum of these values: [usrVHARegReqAccept] = [usrVHARegReqInitAccept] + [usrVHAReRegReqAccept] + [usrVHADeRegReqAccept] Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHADeRegReqAccept 1.3.6.1.4.1.429.4.84.3.23
Total number of DeRegistration Requests accepted from the PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegUpdate 1.3.6.1.4.1.429.4.84.4.1
Total number of valid Registration Updates transmitted to PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegAcknowledge 1.3.6.1.4.1.429.4.84.4.2
Total number of Registration Acknowledgements received from the PCF with status code of zero. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegAckUnspecified 1.3.6.1.4.1.429.4.84.4.3
Total number of Registration Acknowledgements received from the PCF with status code of 128 (reason unspecified). Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegAckAdmProhibited 1.3.6.1.4.1.429.4.84.4.4
Total number of Registration Acknowledgements received from the PCF with status code of 129 (administratively prohibited). Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegAckFailedAuth 1.3.6.1.4.1.429.4.84.4.5
Total number of Registration Acknowledgements received from the PCF with status code of 131 (sending node - PDSN - failed authentication). Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegAckIDMismatch 1.3.6.1.4.1.429.4.84.4.6
Total number of Registration Acknowledgements received from the PCF with status code of 133 (identification mismatch). Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegAckPoorlyFormed 1.3.6.1.4.1.429.4.84.4.7
Total number of Registration Acknowledgements received from the PCF with status code of 134 (poorly formed Registration Update). Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalRegUpdateDenied 1.3.6.1.4.1.429.4.84.4.8
Total number of Registration Updates denied by the RAN. usrVHATotalRegUpdateDenied is the sum of these values: [usrVHATotalRegUpdateDenied] = [usrVHARegAckUnspecified] + [usrVHARegAckAdmProhibited] + [usrVHARegAckFailedAuth] + [usrVHARegAckIDMismatch] + [usrVHARegAckPoorlyFormed] + [usrVHARegAckDeniedOther] Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalRegUpdateNotAck 1.3.6.1.4.1.429.4.84.4.9
usrVHATotalRegUpdateNotAck is incremented if the expected registration acknowledge is not received from the PCF within the time Tregupd. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalRegUpdateInitTrans 1.3.6.1.4.1.429.4.84.4.10
Total number of Initial Registration Updates transmitted to PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalRegUpdateReTrans 1.3.6.1.4.1.429.4.84.4.11
Total number of Registration Updates re-transmitted to PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegUpdateDiscard 1.3.6.1.4.1.429.4.84.4.12
Total number of Registration Updates discarded Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegUpdateTransRPLifeExp 1.3.6.1.4.1.429.4.84.4.13
Number of Registration Updates transmitted, due to RP lifetime expiration Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegUpdateTransPPPLayerCmd 1.3.6.1.4.1.429.4.84.4.14
Number of Registration Updates transmitted, due to PPP layer command Counter epoch is indicated by usrVHAStatsResetTime. OBSOLETE: This object is not supported.
OBJECT-TYPE    
  Counter32  

usrVHARegUpdateTransOther 1.3.6.1.4.1.429.4.84.4.15
Number of Registration Updates transmitted, due to other reasons Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalRegAckRcvd 1.3.6.1.4.1.429.4.84.4.16
Total number of Registration Acknowledgements received from the PCF. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHARegAckDeniedOther 1.3.6.1.4.1.429.4.84.4.17
Total number of Registration Acknowledgements received from PCF with a status code that is currently not further speficied by the PDSN. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHASecurConfigTable 1.3.6.1.4.1.429.4.84.5.1
A table for configuring mobility security associations between the Radio Node and the PDSN.
OBJECT-TYPE    
  SEQUENCE OF  
    UsrVHASecurConfigEntry

usrVHASecurConfigEntry 1.3.6.1.4.1.429.4.84.5.1.1
An entry in the PDSN Security Configuration Table.
OBJECT-TYPE    
  UsrVHASecurConfigEntry  

usrVHASecurSAIndex 1.3.6.1.4.1.429.4.84.5.1.1.1
RP interface can support up to 512 mobility security associations. - The range has been changed from 1-100 to 1-512 for PDSN Rel 4.0
OBJECT-TYPE    
  Integer32 1..512  

usrVHASecurRNAddr 1.3.6.1.4.1.429.4.84.5.1.1.2
The IP Address of the Radio Node with which this RP interface shares the mobility security association.
OBJECT-TYPE    
  IpAddress  

usrVHASecurSPI 1.3.6.1.4.1.429.4.84.5.1.1.3
The SPI is the 4-byte opaque index within the Mobility Security Association which selects the specific security parameters to be used to authenticate the Radio Node.
OBJECT-TYPE    
  UsrSpecialU32  

usrVHASecurSharedSecretKey 1.3.6.1.4.1.429.4.84.5.1.1.4
The shared secret key for the security associations. Reading this object will always return zero length value for SNMP.
OBJECT-TYPE    
  UsrSecretDisplay  

usrVHASecurTimeDrift 1.3.6.1.4.1.429.4.84.5.1.1.5
The value represents how close the timestamp, contained in the Identification information element of the Registration Request or the Registration Acknowledge message, should be to the PDSN's time of day clock. This time tolerance is used in conjunction with timestamp replay protection against replay attacks.
OBJECT-TYPE    
  Integer32 0..255  

usrVHASecurStatus 1.3.6.1.4.1.429.4.84.5.1.1.6
This object is used to add, modify, and delete rows for the security association table.
OBJECT-TYPE    
  RowStatus  

usrVHASecurAuthFlag 1.3.6.1.4.1.429.4.84.5.1.1.7
Toggle to enable or disable authentication of A11 messages over RP Interface
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAZeroPadSecretEntry 1.3.6.1.4.1.429.4.84.5.1.1.8
This setting will determine whether to zero pad secrets of less than 16
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHASecurTotalViolations 1.3.6.1.4.1.429.4.84.6.1
Total number of RP security violations encountered by this PDSN. usrVHASecurTotalViolations is the sum of these values: [usrVHASecurTotalViolations] = [usrVHASecurMissingMSA] + [usrVHASecurBadAuthenticator] + [usrVHASecurBadSPI] + [usrVHASecurMissingMHAuthExt] + [usrVHASecurMissingRUAuthExt] Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHASecurMissingMSA 1.3.6.1.4.1.429.4.84.6.2
Total number of RP security violations due to missing or improper Mobility Security Association (MSA) between the PCF and the PDSN. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHASecurBadAuthenticator 1.3.6.1.4.1.429.4.84.6.3
Total number of RP security violations due to bad Authenticator field. This field is part of either Mobile-Home Authentication Extension information element or the Registration Update Authentication Extension information element. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHASecurBadIdentification 1.3.6.1.4.1.429.4.84.6.4
Total number of security violations due to bad Identification information element. This eight octet element is used by the PCF and the PDSN for matching the Registration Requests with Registration Replies and Registration Updates with Registration Acknowledge messages. It also protects against the replay attacks (section 5.6, RFC 2002). Counter epoch is indicated by usrVHAStatsResetTime. Deprecated: This object is a duplicate of usrVHARegDenIDMismatch.
OBJECT-TYPE    
  Counter32  

usrVHASecurBadSPI 1.3.6.1.4.1.429.4.84.6.5
Total number of RP security violations due to bad SPI field. This field is part of either Mobile-Home Authentication Extension information element or the Registration Update Authentication Extension information element. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHASecurMissingMHAuthExt 1.3.6.1.4.1.429.4.84.6.6
Total number of RP security violations due to missing Mobile-Home Authentication Extension inside the Registration Request message. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHASecurMissingRUAuthExt 1.3.6.1.4.1.429.4.84.6.7
Total number of RP security violations due to missing Registration Update Authentication Extension inside the Registration Acknowledge message. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHASecurViolationTable 1.3.6.1.4.1.429.4.84.6.8
A table containing information about security violations.
OBJECT-TYPE    
  SEQUENCE OF  
    UsrVHASecurViolationEntry

usrVHASecurViolationEntry 1.3.6.1.4.1.429.4.84.6.8.1
Information about a particular security violation.
OBJECT-TYPE    
  UsrVHASecurViolationEntry  

usrVHASecurViolatorTableIndex 1.3.6.1.4.1.429.4.84.6.8.1.1
PDSN can store up to 100 entries for a particular security violation based on the violator's IP address.
OBJECT-TYPE    
  Integer32 1..100  

usrVHASecurViolatorAddress 1.3.6.1.4.1.429.4.84.6.8.1.2
Violator's IP address. This address may not be in the Mobility Security Association table.
OBJECT-TYPE    
  IpAddress  

usrVHASecurViolationCounter 1.3.6.1.4.1.429.4.84.6.8.1.3
Total number of security violations coming from the this violator's IP address.
OBJECT-TYPE    
  Counter32  

usrVHASecurRecentViolationSPI 1.3.6.1.4.1.429.4.84.6.8.1.4
SPI of the most recent security violation coming from this IP address. If the security violation is due to an identification mismatch, then this is the SPI from the Mobile-Home Authentication Extension. If the security violation is due to an invalid authenticator, then this is the SPI from the offending authentication extension. In all other cases, it should be set to zero.
OBJECT-TYPE    
  UsrSpecialU32  

usrVHASecurRecentViolationTime 1.3.6.1.4.1.429.4.84.6.8.1.5
Time of the most recent security violation coming from this IP address. This is NTP time, it will give number of seconds since Jan 1, 1900.
OBJECT-TYPE    
  Time1900  

usrVHASecurRecentViolationIDLow 1.3.6.1.4.1.429.4.84.6.8.1.6
Low-order 32 bits of identification used in Registration Request or Registration Acknowledge of the most recent security violation coming from this IP address.
OBJECT-TYPE    
  UsrRegID  

usrVHASecurRecentViolationIDHigh 1.3.6.1.4.1.429.4.84.6.8.1.7
High-order 32 bits of identification used in Registration Request or Registration Acknowledge of the most recent security violation coming from this IP address.
OBJECT-TYPE    
  UsrRegID  

usrVHASecurRecentViolationReason 1.3.6.1.4.1.429.4.84.6.8.1.8
Reason for the most recent security violation coming from this IP address.
OBJECT-TYPE    
  INTEGER noMobilitySecurityAssociation(1), badAuthenticator(2), badIdentifier(3), badSPI(4), missingSecurityExtension(5), other(6)  

usrVHATotalGREPktsRcvd 1.3.6.1.4.1.429.4.84.7.1
Total number of GRE encapsulated packets received from IP. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalGREPktsTrans 1.3.6.1.4.1.429.4.84.7.2
Total number of GRE encapsulated packets delivered to IP for transmission. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalGREBytesRcvd 1.3.6.1.4.1.429.4.84.7.3
Total number of GRE encapsulated bytes received from IP. The GRE header bytes are not counted. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHATotalGREBytesTrans 1.3.6.1.4.1.429.4.84.7.4
Total number of GRE encapsulated bytes delivered to IP for transmission. The GRE header bytes are not counted. Counter epoch is indicated by usrVHAStatsResetTime.
OBJECT-TYPE    
  Counter32  

usrVHAConfigFileName 1.3.6.1.4.1.429.4.84.8.1
The name of the configuration file for VHA. If this value is empty, then the default file name is @file://VHAProcess.cfg.
OBJECT-TYPE    
  DisplayString Size(1..32)  

usrVHACfmStatus 1.3.6.1.4.1.429.4.84.8.2
The Configuration File Manager Flag for saving VHA configurable parameters.
OBJECT-TYPE    
  UsrConfigStatus  

usrVHASessionsPM 1.3.6.1.4.1.429.4.84.10.1
OBJECT IDENTIFIER    

usrVHAActiveSessionsPM 1.3.6.1.4.1.429.4.84.10.2
OBJECT IDENTIFIER    

usrVHAFailedSessionsPM 1.3.6.1.4.1.429.4.84.10.3
OBJECT IDENTIFIER    

usrVHAPktThroughputPM 1.3.6.1.4.1.429.4.84.10.4
OBJECT IDENTIFIER    

usrVHASessionsCriticalAlarmThresh 1.3.6.1.4.1.429.4.84.10.1.1
The critical alarm threshold for usrVHASessionsCurrent gauge. The value of this object will be automatically set to the lesser of usrVHAMaxSessions or the internal VHA Max session limit, whichever is less. IF usrVHASessionsAlarmState is not 'critical' and the current gauge value is equal or greater than this threshold, THEN usrVHASessionsAlarmState will change to 'critical'. See usrVHASessionsAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHASessionsMajorAlarmThresh 1.3.6.1.4.1.429.4.84.10.1.2
The major alarm threshold for usrVHASessionsCurrent gauge. The allowed range of this object is 0 to usrVHAMaxSessions. The object is also constrained to be less than or equal to usrVHASessionsCriticalAlarmThresh. If usrVHAMaxSessions is reduced below the value of this object, this object will automatically reduced so that this constraint holds. Value of 0 disables this threshold. IF this object is set to a non-zero value equal or less than the current value of usrVHASessionsClearAlarmThresh, THEN usrVHASessionsClearAlarmThresh will be automatically reduced to a valid value. This value is set indirectly by setting usrVHASessionsMajorAlarmThreshPct Changing threshold values causes the alarm state to be re-evaluated. IF usrVHASessionsAlarmState is 'clear' and the current gauge value is equal or greater than this threshold, and the current gauge value is less than non-zero usrVHASessionsCriticalAlarmThresh, and the threshold is not 0, THEN usrVHASessionsAlarmState will change to 'major'. See usrVHASessionsAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHASessionsClearAlarmThresh 1.3.6.1.4.1.429.4.84.10.1.3
The alarm clear threshold for usrVHASessionsCurrent gauge. The allowed range of this object is 0 to usrVHAMaxSessions. This object must also be less than non-zero usrVHASessionsMajorAlarmThresh and usrVHASessionsCricalAlarmThresh. IF usrVHASessionsMajorAlarmThresh is non zero, THEN object must be less than usrVHASessionsMajorAlarmThresh. This value is set indirectly by setting usrVHASessionsClearAlarmThreshPct Changing the threshold value causes the alarm state to be re-evaluated. IF usrVHASessionsAlarmState is not 'clear' and the current gauge value is equal or less than this threshold, THEN usrVHASessionsAlarmState will change to 'clear'. See usrVHASessionsAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHASessionsMajorAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.1.4
The major alarm threshold for usrVHASessionsCurrent gauge expressed as a percentage of usrVHAMaxSessions. The allowed range of this object is 0 to 100. Writing this object causes usrVHASessionsMajorAlarmThresh to be re-calculated. Writing usrVHASessionsMajorAlarmThresh causes this object to be re-calculated. See usrVHASessionsMajorAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHASessionsClearAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.1.5
The clear alarm threshold for usrVHASessionsCurrent gauge expressed as a percentage of usrVHAMaxSessions. The allowed range of this object is 0 to 100. Writing this object causes usrVHASessionsClearAlarmThresh to be re-calculated. Writing usrVHASessionsClearAlarmThresh causes this object to be re-calculated. See usrVHASessionsClearAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHASessionsTrapsEnabled 1.3.6.1.4.1.429.4.84.10.1.6
This object controls trap generation when usrVHASessionAlarmState changes. See usrVHASessionsAlarmState for alarm details.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHASessionsAlarmState 1.3.6.1.4.1.429.4.84.10.1.7
Alarm state is maintained by PDSN by comparing usrVHASessionsCurrent with critical, major, and clear alarm thresholds. IF alarm state changes to critical, AND usrVHASessionsTrapsEnabled is true THEN usrVHASessionsCriticalAlarm TRAP will be sent. IF alarm state changes to major, AND usrVHASessionsTrapsEnabled is true THEN usrVHASessionsMajorAlarm TRAP will be sent. IF alarm state changes to clear, AND usrVHASessionsTrapsEnabled is true THEN usrVHASessionsCriticalAlarm TRAP will be sent. IF alarm state changes, THEN usrVHASessionsAlarmTime is updated with the current time regardless of usrVHASessionsTrapsEnabled and usrVHASessionsAlarmChanges is incremented. This allows alarm state and time information to be retrieved by SNMP management stations that don't support SNMP traps or when traps are intentionally disabled to reduce trap processing load on the SNMP management station. Writing a 'clear' value will force the alarm state to go to 'clear'. This will count as a state change and cause a trap if the state was 'major' or 'critical'. This step conceptually occurs before comparing the alarm thresholds. If major or critical thresholds are exceeded, the appropriate state change and trap occur. This means that writing 'clear' may cause 0, 1, or 2 alarm state changes and traps.
OBJECT-TYPE    
  INTEGER clear(0), major(1), critical(2)  

usrVHASessionsAlarmTime 1.3.6.1.4.1.429.4.84.10.1.8
The time of the last usrVHASessionsAlarmState state change. If the state has never changed, this value will be zero.
OBJECT-TYPE    
  Time1970  

usrVHASessionsAlarmChanges 1.3.6.1.4.1.429.4.84.10.1.9
Count of usrVHASessionsAlarmState changes.
OBJECT-TYPE    
  Counter32  

usrVHAActiveSessionsCriticalAlarmThresh 1.3.6.1.4.1.429.4.84.10.2.1
The critical alarm threshold for usrVHAActiveSessionsCurrent gauge. The allowed range of this object is 0 to usrVHAMaxSessions. If usrVHAMaxSessions is reduced below the value of this object, this object will automatically reduced so that this constraint holds. Object value of 0 disables this alarm and threshold.. IF this object is set to a non-zero value equal or less than the current value of usrVHAActiveSessionsMajorAlarmThresh, THEN usrVHAActiveSessionsMajorAlarmThresh will be automatically reduced to a valid value. IF this object is set to a non-zero value equal or less than the current value of usrVHAActiveSessionsClearAlarmThresh, THEN usrVHAActiveSessionsClearAlarmThresh will be automatically reduced to a valid value. This value is set indirectly by setting usrVHAActiveSessionsCriticalAlarmThreshPct Changing threshold values causes the alarm state to be re-evaluated. IF usrVHAActiveSessionsAlarmState is not 'critical' and the current gauge value is equal or greater than this critical threshold, and this critical threshold is non-zero, THEN usrVHAActiveSessionsAlarmState will change to 'critical'. See usrVHAActiveSessionsAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAActiveSessionsMajorAlarmThresh 1.3.6.1.4.1.429.4.84.10.2.2
The major alarm threshold for usrVHAActiveSessionsCurrent gauge. The allowed range of this object is 0 to usrVHAMaxSessions. The object is also constrained to be less than or equal to usrVHAActiveSessionsCriticalAlarmThresh. If usrVHAMaxSessions is reduced below the value of this object, this object will automatically reduced so that this constraint holds. Value of 0 disables this threshold. IF this object is set to a non-zero value equal or less than the current value of usrVHAActiveSessionsClearAlarmThresh, THEN usrVHAActiveSessionsClearAlarmThresh will be automatically reduced to a valid value. This value is set indirectly by setting usrVHAActiveSessionsMajorAlarmThreshPct Changing threshold values causes the alarm state to be re-evaluated. IF usrVHAActiveSessionsAlarmState is 'clear' and the current gauge value is equal or greater than this threshold, and the current gauge value is less than non-zero usrVHAActiveSessionsCriticalAlarmThresh, and the threshold is not zero, THEN usrVHAActiveSessionsAlarmState will change to 'major'. See usrVHAActiveSessionsAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAActiveSessionsClearAlarmThresh 1.3.6.1.4.1.429.4.84.10.2.3
The alarm clear threshold for usrVHAActiveSessionsCurrent gauge. The allowed range of this object is 0 to usrVHAMaxSessions. This object must also be less than non-zero usrVHAActiveSessionsMajorAlarmThresh and non-zero usrVHAActiveSessionsCricalAlarmThresh. This value is set indirectly by setting usrVHAActiveSessionsClearAlarmThreshPct Changing the threshold value causes the alarm state to be re-evaluated. IF usrVHAActiveSessionsAlarmState is not 'clear' and the current gauge value is equal or less than this threshold, THEN usrVHAActiveSessionsCriticalAlarmState will change to 'clear'. See usrVHAActiveSessionsAlarmState for trap generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAActiveSessionsCriticalAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.2.4
The major alarm threshold for usrVHAActiveSessionsCurrent gauge expressed as a percentage of usrVHAMaxSessions. The allowed range of this object is 0 to 100. Writing this object causes usrVHAActiveSessionsMajorAlarmThresh to be re-calculated. Writing usrVHAActiveSessionsMajorAlarmThresh causes this object to be re-calculated. See usrVHAActiveSessionsMajorAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHAActiveSessionsMajorAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.2.5
The major alarm threshold for usrVHAActiveSessionsCurrent gauge expressed as a percentage of usrVHAMaxSessions. The allowed range of this object is 0 to 100. Writing this object causes usrVHAActiveSessionsMajorAlarmThresh to be re-calculated. Writing usrVHAActiveSessionsMajorAlarmThresh causes this object to be re-calculated. See usrVHAActiveSessionsMajorAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHAActiveSessionsClearAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.2.6
The clear alarm threshold for usrVHAActiveSessionsCurrent gauge expressed as a percentage of usrVHAMaxSessions. The allowed range of this object is 0 to 100. Writing this object causes usrVHAActiveSessionsClearAlarmThresh to be re-calculated. Writing usrVHAActiveSessionsClearAlarmThresh causes this object to be re-calculated. See usrVHAActiveSessionsClearAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHAActiveSessionsTrapsEnabled 1.3.6.1.4.1.429.4.84.10.2.7
This object controls trap generation when usrVHASActiveSessionsAlarmState changes. See usrVHAActiveSessionsAlarmState for alarm details.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAActiveSessionsAlarmState 1.3.6.1.4.1.429.4.84.10.2.8
Alarm state is maintained by PDSN by comparing usrVHAActiveSessionsCurrent with critical, major, and clear alarm thresholds. IF alarm state changes to critical, AND usrVHAActiveSessionsTrapsEnabled is true THEN usrVHAActiveSessionsCriticalAlarm TRAP will be sent. IF alarm state changes to major, AND usrVHAActiveSessionsTrapsEnabled is true THEN usrVHAActiveSessionsMajorAlarm TRAP will be sent. IF alarm state changes to clear, AND usrVHAActiveSessionsTrapsEnabled is true THEN usrVHAActiveSessionsCriticalAlarm TRAP will be sent. IF alarm state changes, THEN usrVHAActiveSessionsAlarmTime is updated with the current time regardless of usrVHAActiveSessionsTrapsEnabled and usrVHAActiveSessionsAlarmChanges is incremented. This allows alarm state and time information to be retrieved by SNMP management stations that don't support SNMP traps or when traps are intentionally disabled to reduce trap processing load on the SNMP management station. Writing a 'clear' value will force the alarm state to go to 'clear'. This will count as a state change and cause a trap if the state was 'major' or 'critical'. This step conceptually occurs before comparing the alarm thresholds. If major or critical thresholds are exceeded, the appropriate state change and trap occur. This means that writing 'clear' may cause 0, 1, or 2 alarm state changes and traps.
OBJECT-TYPE    
  INTEGER clear(0), major(1), critical(2)  

usrVHAActiveSessionsAlarmTime 1.3.6.1.4.1.429.4.84.10.2.9
Time last usrVHAActiveSessionsAlarmState state change. If the state has never changed, this value will be zero.
OBJECT-TYPE    
  Time1970  

usrVHAActiveSessionsAlarmChanges 1.3.6.1.4.1.429.4.84.10.2.10
Count of usrVHAActiveSessionsAlarmState changes.
OBJECT-TYPE    
  Counter32  

usrVHAFailedSessionsCriticalAlarmThresh 1.3.6.1.4.1.429.4.84.10.3.1
The critical alarm threshold for usrVHAFailedSessionsValue gauge. Object value of 0 disables this alarm and threshold. IF this object is set to a non-zero value equal or less than the current value of usrVHAFailedSessionsMajorAlarmThresh, THEN usrVHAFailedSessionsMajorAlarmThresh will be automatically reduced to a valid value. IF this object is set to a non-zero value equal or less than the current value of usrVHAFailedSessionsClearAlarmThresh, THEN usrVHAFailedSessionsClearAlarmThresh will be automatically reduced to a valid value. Agent is allowed to either reject a SET which violates these constraints, or adjust the object value such that the constraints hold. Changing threshold values causes the alarm state to be re-evaluated. IF usrVHAFailedSessionsAlarmState is not 'critical' and the current gauge value is equal or greater than this critical threshold, and this critical threshold is non-zero, THEN usrVHAFailedSessionsAlarmState will change to 'critical'. See usrVHAFailedSessionsAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAFailedSessionsMajorAlarmThresh 1.3.6.1.4.1.429.4.84.10.3.2
The major alarm threshold for usrVHAFailedSessionsValue gauge. Value of 0 disables this threshold. IF this object is set to a non-zero value equal or less than the current value of usrVHAFailedSessionsClearAlarmThresh, THEN usrVHAFailedSessionsClearAlarmThresh will be automatically reduced to a valid value. This value is set indirectly by setting usrVHAFailedSessionsMajorAlarmThreshPct Changing threshold values causes the alarm state to be re-evaluated. IF usrVHAFailedSessionsAlarmState is 'clear' and the current gauge value is equal or greater than this threshold, and the current gauge value is less than non-zero usrVHAFailedSessionsCriticalAlarmThresh, and the threshold is not zero, THEN usrVHAFailedSessionsAlarmState will change to 'major'. See usrVHAFailedSessionsAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAFailedSessionsClearAlarmThresh 1.3.6.1.4.1.429.4.84.10.3.3
The alarm clear threshold for usrVHAFailedSessionsValue gauge. This object must be less than usrVHAFailedSessionsMajorAlarmThresh (if non-zero) usrVHAFailedSessionsCricalAlarmThresh (if non-zero).. This value is set indirectly by setting usrVHAFailedSessionsClearAlarmThreshPct Changing the threshold value causes the alarm state to be re-evaluated. IF usrVHAFailedSessionsAlarmState is not 'clear' and the current gauge value is equal or less than this threshold, THEN usrVHAFailedSessionsCriticalAlarmState will change to 'clear'. See usrVHAFailedSessionsAlarmState for trap generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAFailedSessionsMajorAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.3.4
The major alarm threshold for usrVHAFailedSessionsValue gauge expressed as a percentage of usrVHAFailedSessionsCriticalAlarmThesh. The allowed range of this object is 0 to 100. Writing this object causes usrVHAFailedSessionsMajorAlarmThresh to be re-calculated. Writing usrVHAFailedSessionsMajorAlarmThresh causes this object to be re-calculated. See usrVHAFailedSessionsMajorAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHAFailedSessionsClearAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.3.5
The clear alarm threshold for usrVHAFailedSessionsValue gauge expressed as a percentage of usrVHAFailedSessionsCriticalAlarmThesh. The allowed range of this object is 0 to 100. Writing this object causes usrVHAFailedSessionsClearAlarmThresh to be re-calculated. Writing usrVHAFailedSessionsClearAlarmThresh causes this object to be re-calculated. See usrVHAFailedSessionsClearAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHAFailedSessionsTrapsEnabled 1.3.6.1.4.1.429.4.84.10.3.6
This object controls trap generation when usrVHAFailedSessionsAlarmState changes. See usrVHAFailedSessionsAlarmState for alarm details.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAFailedSessionsInterval 1.3.6.1.4.1.429.4.84.10.3.7
The interval in seconds over which the RP Failed Sessions (RP Sessions that failed to establish) are sampled (measured) to determine a packet throughput by making a delta between a previous sample and a new sample. The delta is stored in usrVHAFailedSessionsValue and thresholds are checked. Value of zero disables RP Failed Sessions alarms and forces alarm state to 'clear'.
OBJECT-TYPE    
  Unsigned32  

usrVHAFailedSessionsAlarmState 1.3.6.1.4.1.429.4.84.10.3.8
Alarm state is maintained by PDSN by comparing usrVHAFailedSessionsValue with critical, major, and clear alarm thresholds. IF alarm state changes to critical, AND usrVHAFailedSessionsTrapsEnabled is true THEN usrVHAFailedSessionsCriticalAlarm TRAP will be sent. IF alarm state changes to major, AND usrVHAFailedSessionsTrapsEnabled is true THEN usrVHAFailedSessionsMajorAlarm TRAP will be sent. IF alarm state changes to clear, AND usrVHAFailedSessionsTrapsEnabled is true THEN usrVHAFailedSessionsCriticalAlarm TRAP will be sent. IF alarm state changes, THEN usrVHAFailedSessionsAlarmTime is updated with the current time regardless of usrVHAFailedSessionsTrapsEnabled and usrVHAFailedSessionsAlarmChanges is incremented. This allows alarm state and time information to be retrieved by SNMP management stations that don't support SNMP traps or when traps are intentionally disabled to reduce trap processing load on the SNMP management station. Writing a 'clear' value will force the alarm state to go to 'clear'. This will count as a state change and cause a trap if the state was 'major' or 'critical'. This step conceptually occurs before comparing the alarm thresholds. If major or critical thresholds are exceeded, the appropriate state change and trap occur. This means that writing 'clear' may cause 0, 1, or 2 alarm state changes and traps.
OBJECT-TYPE    
  INTEGER clear(0), major(1), critical(2)  

usrVHAFailedSessionsAlarmTime 1.3.6.1.4.1.429.4.84.10.3.9
Time of last usrVHAFailedSessionsAlarmState state change. If the state has never changed, this value will be zero.
OBJECT-TYPE    
  Time1970  

usrVHAFailedSessionsAlarmChanges 1.3.6.1.4.1.429.4.84.10.3.10
Count of usrVHAFailedSessionsAlarmState changes.
OBJECT-TYPE    
  Counter32  

usrVHAFailedSessionsValue 1.3.6.1.4.1.429.4.84.10.3.11
The value of the statistic during the last measurement interval. usrVHARegReqDenied is sampled at the start and at the end of a measurement interval. This MIB object represents the delta value between these two samples. The interval MIB object is usrVHAFailedSessionsInterval. The value of this MIB object is the value that is compared with the 3 thresholds for alarm generation. The value during the current measurement period is not made available until the measurement period is completed and will remain available until the next period completes.
OBJECT-TYPE    
  Gauge32  

usrVHAPktThroughputCriticalAlarmThresh 1.3.6.1.4.1.429.4.84.10.4.1
The critical alarm threshold for usrVHAPktThroughputValue gauge. Object value of 0 disables this alarm and threshold. IF this object is set to a non-zero value equal or less than the current value of usrVHAPktThroughputMajorAlarmThresh, THEN usrVHAPktThroughputMajorAlarmThresh will be automatically reduced to a valid value. IF this object is set to a non-zero value equal or less than the current value of usrVHAPktThroughputClearAlarmThresh, THEN usrVHAPktThroughputClearAlarmThresh will be automatically reduced to a valid value. Agent is allowed to either reject a SET which violates these constraints, or adjust the object value such that the constraints hold. Changing threshold values causes the alarm state to be re-evaluated. IF usrVHAPktThroughputAlarmState is not 'critical' and the current gauge value is equal or greater than this critical threshold, and this critical threshold is non-zero, THEN usrVHAPktThroughputAlarmState will change to 'critical'. See usrVHAPktThroughputAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAPktThroughputMajorAlarmThresh 1.3.6.1.4.1.429.4.84.10.4.2
The major alarm threshold for usrVHAPktThroughputValue gauge. Value of 0 disables this threshold. IF this object is set to a non-zero value equal or less than the current value of usrVHAPktThroughputClearAlarmThresh, THEN usrVHAPktThroughputClearAlarmThresh will be automatically reduced to a valid value. This value is set indirectly by setting usrVHAPktThroughputMajorAlarmThreshPct Changing threshold values causes the alarm state to be re-evaluated. IF usrVHAPktThroughputAlarmState is 'clear' and the current gauge value is equal or greater than this threshold, and the current gauge value is less than non-zero usrVHAPktThroughputCriticalAlarmThresh, and the threshold is not zero, THEN usrVHAPktThroughputAlarmState will change to 'major'. See usrVHAPktThroughputAlarmState for TRAP generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAPktThroughputClearAlarmThresh 1.3.6.1.4.1.429.4.84.10.4.3
The alarm clear threshold for usrVHAPktThroughputValue gauge. This object must be less than usrVHAPktThroughputMajorAlarmThresh (if non-zero) usrVHAPktThroughputCricalAlarmThresh (if non-zero).. This value is set indirectly by setting usrVHAPktThroughputMajorAlarmThreshPct. Changing the threshold value causes the alarm state to be re-evaluated. IF usrVHAPktThroughputAlarmState is not 'clear' and the current gauge value is equal or less than this threshold, THEN usrVHAPktThroughputCriticalAlarmState will change to 'clear'. See usrVHAPktThroughputAlarmState for trap generation details.
OBJECT-TYPE    
  Unsigned32  

usrVHAPktThroughputMajorAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.4.4
The major alarm threshold for usrVHAPktThroughputValue gauge expressed as a percentage of usrVHAPktThroughputCriticalAlarmThesh. The allowed range of this object is 0 to 100. Writing this object causes usrVHAPktThroughputMajorAlarmThresh to be re-calculated. Writing usrVHAPktThroughputMajorAlarmThresh causes this object to be re-calculated. See usrVHAPktThroughputMajorAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHAPktThroughputClearAlarmThreshPct 1.3.6.1.4.1.429.4.84.10.4.5
The clear alarm threshold for usrVHAPktThroughputValue gauge expressed as a percentage of usrVHAPktThroughputCriticalAlarmThesh. The allowed range of this object is 0 to 100. Writing this object causes usrVHAPktThroughputClearAlarmThresh to be re-calculated. Writing usrVHAPktThroughputClearAlarmThresh causes this object to be re-calculated. See usrVHAPktThroughputClearAlarmThresh for effects of changing threshold value such as causing the alarm state to be re-evaluated.
OBJECT-TYPE    
  Integer32 0..100  

usrVHAPktThroughputTrapsEnabled 1.3.6.1.4.1.429.4.84.10.4.6
This object controls trap generation when usrVHASActiveSessionsAlarmState changes. See usrVHAPktThroughputAlarmState for alarm details.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrVHAPktThroughputInterval 1.3.6.1.4.1.429.4.84.10.4.7
The interval in seconds over which the RP packet counters are sampled (measured) to determine a packet throughput by making a delta between a previous sample and a new sample. The delta is stored in usrVHAPktThroughputValue and thresholds are checked. Value of zero disables RP Packet Throughput alarms and forces alarm state to 'clear'.
OBJECT-TYPE    
  Unsigned32  

usrVHAPktThroughputAlarmState 1.3.6.1.4.1.429.4.84.10.4.8
Alarm state is maintained by PDSN by comparing usrVHAPktThroughputValue with critical, major, and clear alarm thresholds. IF alarm state changes to critical, AND usrVHAPktThroughputTrapsEnabled is true THEN usrVHAPktThroughputCriticalAlarm TRAP will be sent. IF alarm state changes to major, AND usrVHAPktThroughputTrapsEnabled is true THEN usrVHAPktThroughputMajorAlarm TRAP will be sent. IF alarm state changes to clear, AND usrVHAPktThroughputTrapsEnabled is true THEN usrVHAPktThroughputCriticalAlarm TRAP will be sent. IF alarm state changes, THEN usrVHAPktThroughputAlarmTime is updated with the current time regardless of usrVHAPktThroughputTrapsEnabled and usrVHAPktThroughputAlarmChanges is incremented. This allows alarm state and time information to be retrieved by SNMP management stations that don't support SNMP traps or when traps are intentionally disabled to reduce trap processing load on the SNMP management station. Writing a 'clear' value will force the alarm state to go to 'clear'. This will count as a state change and cause a trap if the state was 'major' or 'critical'. This step conceptually occurs before comparing the alarm thresholds. If major or critical thresholds are exceeded, the appropriate state change and trap occur. This means that writing 'clear' may cause 0, 1, or 2 alarm state changes and traps.
OBJECT-TYPE    
  INTEGER clear(0), major(1), critical(2)  

usrVHAPktThroughputAlarmTime 1.3.6.1.4.1.429.4.84.10.4.9
Time of last usrVHAPktThroughputAlarmState state change. If the state has never changed, this value will be zero.
OBJECT-TYPE    
  Time1970  

usrVHAPktThroughputAlarmChanges 1.3.6.1.4.1.429.4.84.10.4.10
Count of usrVHAPktThroughputAlarmState changes.
OBJECT-TYPE    
  Counter32  

usrVHAPktCounts 1.3.6.1.4.1.429.4.84.10.4.11
Count of RP Packets sent and received. This is the sum of usrVHATotalCREPktsRcvd - A10 Packets received usrVHATotalGREPktsTrans - A10 Packets sent usrVHARegReqRcvd - A11 Packets received (1 of 3) usrVHARegAcknowledge - A11 Packets received (2 of 3) usrVHATotalRegUpdateDenied - A11 Packets received (3 of 3) usrVHARegReqAccept - A11 Packets sent (1 of 3) usrVHARegReqDenied - A11 Packets sent (2 of 3) usrVHARegUpdate - A11 Packets sent (3 of 3)
OBJECT-TYPE    
  Counter32  

usrVHAPktThroughputValue 1.3.6.1.4.1.429.4.84.10.4.12
The value of the statistic during the last measurement interval. usrVHAPktCounts is sampled at the start and at the end of a measurement interval. This MIB object represents the delta value between these two samples. The interval MIB object is usrVHAPktThroughputInterval. The value of this MIB object is the value that is compared with the 3 thresholds for alarm generation. The value during the current measurement period is not made available until the measurement period is completed ahd will remain available until the next period completes.
OBJECT-TYPE    
  Gauge32  

usrVHATrapsv2 1.3.6.1.4.1.429.4.84.9.0
The events for VHA traps
OBJECT-IDENTITY    

usrVHARegistrationRequestAuthFailure 1.3.6.1.4.1.429.4.84.9.0.1
This trap is generated when authentication fails on the Registration Request message.
NOTIFICATION-TYPE    

usrVHARegistrationAcknowledgeAuthFailure 1.3.6.1.4.1.429.4.84.9.0.2
This trap is generated when authentication fails on the Registration Acknowledge message.
NOTIFICATION-TYPE    

usrVHAServiceOptionStatsTable 1.3.6.1.4.1.429.4.84.11.1
A table of R-P Registration request stats based on Service Option
OBJECT-TYPE    
  SEQUENCE OF  
    UsrVHAServiceOptionStatsEntry

usrVHAServiceOptionStatsEntry 1.3.6.1.4.1.429.4.84.11.1.1
An entry in the VHA Service Option Stats Table.
OBJECT-TYPE    
  UsrVHAServiceOptionStatsEntry  

usrVHAServiceOptionStatsTableIndex 1.3.6.1.4.1.429.4.84.11.1.1.1
The value of Service Option recived over A11 interface by PDSN.
OBJECT-TYPE    
  Integer32 1..65535  

usrVHAServiceOptionRegReqRcvd 1.3.6.1.4.1.429.4.84.11.1.1.2
Total number of valid Registration Requests received for the Service Option.
OBJECT-TYPE    
  Counter32  

usrVHAServiceOptionRegRepAccept 1.3.6.1.4.1.429.4.84.11.1.1.3
Total number of Registration Replies accepted with code information element inside the Registration Accept message equal to zero for this service option.
OBJECT-TYPE    
  Counter32  

usrVHAServiceOptionDeRegReqRcvd 1.3.6.1.4.1.429.4.84.11.1.1.4
Total number of valid Registration Requests received with a Lifetime of zero (requests to deregister) for this service option.
OBJECT-TYPE    
  Counter32  

usrVHAServiceOptionDeRegRepAccept 1.3.6.1.4.1.429.4.84.11.1.1.5
Total number of Registration Replies accepted in response to a deregistration request with code information element inside the Registration Accept message equal to zero for this service option.
OBJECT-TYPE    
  Counter32  

usrVHASessionsCriticalAlarm 1.3.6.1.4.1.429.4.84.9.0.3
The SNMP trap that is generated when usrVHASessionsAlarmsState goes to 'critical' and usrVHASessionsAlarmsEnabled is 'true' This alarm occurs when the sum of active and dormant RP session reaches or exceeds the critical threshold.
NOTIFICATION-TYPE    

usrVHASessionsMajorAlarm 1.3.6.1.4.1.429.4.84.9.0.4
The SNMP trap that is generated when usrVHASessionsAlarmsState goes to 'major' and usrVHASessionsAlarmsEnabled is 'true' This alarm occurs when the sum of active and dormant RP session reaches or exceeds the major threshold while state is 'clear' but does not reach or exceed the critical threshold.
NOTIFICATION-TYPE    

usrVHASessionsClearAlarm 1.3.6.1.4.1.429.4.84.9.0.5
The SNMP trap that is generated when usrVHASessionsAlarmsState goes to 'clear' and usrVHASessionsAlarmsEnabled is 'true' This alarm occurs when the sum of active and dormant RP session falls to or below the 'clear' threshold after a 'major' or 'critical' alarm has been declared.
NOTIFICATION-TYPE    

usrVHAActiveSessionsCriticalAlarm 1.3.6.1.4.1.429.4.84.9.0.6
The SNMP trap that is generated when usrVHAActiveSessionsAlarmsState goes to 'critical' and usrVHAActiveSessionsAlarmsEnabled is 'true' This alarm occurs when the number of active RP session reaches or exceeds the critical threshold.
NOTIFICATION-TYPE    

usrVHAActiveSessionsMajorAlarm 1.3.6.1.4.1.429.4.84.9.0.7
The SNMP trap that is generated when usrVHAActiveSessionsAlarmsState goes to 'major' and usrVHAActiveSessionsAlarmsEnabled is 'true' This alarm occurs when the number of active RP session reaches or exceeds the major threshold while state is 'clear' but does not reach or exceed the critical threshold.
NOTIFICATION-TYPE    

usrVHAActiveSessionsClearAlarm 1.3.6.1.4.1.429.4.84.9.0.8
The SNMP trap that is generated when usrVHAActiveSessionsAlarmsState goes to 'clear' and usrVHAActiveSessionsAlarmsEnabled is 'true' This alarm occurs when the number of active RP session falls to or below the 'clear' threshold after a 'major' or 'critical' alarm has been declared.
NOTIFICATION-TYPE    

usrVHAFailedSessionsCriticalAlarm 1.3.6.1.4.1.429.4.84.9.0.9
The SNMP trap that is generated when usrVHAFailedSessionsAlarmsState goes to 'clear' and usrVHAFailedSessionsAlarmsEnabled is 'true' This alarm occurs when the RP Failed Sessions as measured number of RP Reg Req Denied in the last measurement interval falls to or below the 'clear' threshold after a 'major' or 'critical' alarm has been declared.
NOTIFICATION-TYPE    

usrVHAFailedSessionsMajorAlarm 1.3.6.1.4.1.429.4.84.9.0.10
The SNMP trap that is generated when usrVHAFailedSessionsAlarmsState goes to 'major' and usrVHAFailedSessionsAlarmsEnabled is 'true' This alarm occurs when the RP Failed Sessions as measured number of RP Reg Req Denied in the last measurement interval reaches or exceeds the major threshold while state is 'clear' but does not reach or exceed the critical threshold.
NOTIFICATION-TYPE    

usrVHAFailedSessionsClearAlarm 1.3.6.1.4.1.429.4.84.9.0.11
The SNMP trap that is generated when usrVHAFailedSessionsAlarmsState goes to 'major' and usrVHAFailedSessionsAlarmsEnabled is 'true' This alarm occurs when the RP Failed Sessions as measured number of RP Reg Req Denied in the last measurement interval falls to or below the 'clear' threshold after a 'major' or 'critical' alarm has been declared.
NOTIFICATION-TYPE    

usrVHAPktThroughputCriticalAlarm 1.3.6.1.4.1.429.4.84.9.0.12
The SNMP trap that is generated when usrVHAPktThroughputAlarmsState goes to 'clear' and usrVHAPktThroughputAlarmsEnabled is 'true' This alarm occurs when the RP Packet Throughput as measured number of RP packets sent or received in last interval falls to or below the 'clear' threshold after a 'major' or 'critical' alarm has been declared.
NOTIFICATION-TYPE    

usrVHAPktThroughputMajorAlarm 1.3.6.1.4.1.429.4.84.9.0.13
The SNMP trap that is generated when usrVHAPktThroughputAlarmsState goes to 'major' and usrVHAPktThroughputAlarmsEnabled is 'true' This alarm occurs when the RP Packet Throughput as measured number of RP packets sent or received in last interval reaches or exceeds the major threshold while state is 'clear' but does not reach or exceed the critical threshold.
NOTIFICATION-TYPE    

usrVHAPktThroughputClearAlarm 1.3.6.1.4.1.429.4.84.9.0.14
The SNMP trap that is generated when usrVHAPktThroughputAlarmsState goes to 'clear' and usrVHAPktThroughputAlarmsEnabled is 'true' This alarm occurs when the RP Packet Throughput as measured number of RP packets sent or received in last interval falls to or below the 'clear' threshold after a 'major' or 'critical' alarm has been declared.
NOTIFICATION-TYPE    

usrVHAIMSIStatsEntry 1.3.6.1.4.1.429.4.84.2.10.1
An entry in the IMSI Association Table.
OBJECT-TYPE    
  UsrVHAIMSIStatsEntry  

usrVHAIMSISessionIndex 1.3.6.1.4.1.429.4.84.2.10.1.1
PDSN's RP interface can support up to 4000 sessions. This value indicates the session number assigned to the connection by the PDSN.
OBJECT-TYPE    
  Integer32 1..4000  

usrVHAIMSIDecodedASCII 1.3.6.1.4.1.429.4.84.2.10.1.2
The International Mobile Subscriber Identifier in Decoded ASCII format.
OBJECT-TYPE    
  DisplayString Size(10..15)  

usrVHAIMSIEncodedASCII 1.3.6.1.4.1.429.4.84.2.10.1.3
The International Mobile Subscriber Identifier in Encoded ASCII format.
OBJECT-TYPE    
  DisplayString Size(7)