USR-USER-MAN-MIB

File: USR-USER-MAN-MIB.mib (163989 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC USR-DEFINITIONS-MIB

Imported symbols

OBJECT-TYPE OBJECT-IDENTITY NOTIFICATION-TYPE
MODULE-IDENTITY Counter32 IpAddress
Integer32 TruthValue RowStatus
DisplayString DateAndTime common
UsrUserName UsrDisplayString UsrAAADisplay

Defined Types

UumEntry  
SEQUENCE    
  uumUserName UsrUserName
  uumStatus INTEGER
  uumUserPassword OCTET STRING
  uumServiceType Integer32
  uumFramedProtocol INTEGER
  uumFramedIpAddress IpAddress
  uumFramedIpNetmask IpAddress
  uumFramedRouting INTEGER
  uumFilterIdInput OCTET STRING
  uumFramedMtu Integer32
  uumFramedCompression INTEGER
  uumLoginIpHost IpAddress
  uumLoginService INTEGER
  uumLoginPort Integer32
  uumReplyMessage OCTET STRING
  uumCallbackNumberOne OCTET STRING
  uumExpiration OCTET STRING
  uumFramedRoute OCTET STRING
  uumFramedIpxNetwork OCTET STRING
  uumSessionTimeout Integer32
  uumIdleTimeout Integer32
  uumBearerCapabilities INTEGER
  uumSpeedOfConnection INTEGER
  uumMaxChannels Integer32
  uumChannelExpansion Integer32
  uumChannelDecrement Integer32
  uumExpansionAlgorithm INTEGER
  uumCompressionAlgorithm INTEGER
  uumReceiveAccMap Integer32
  uumTransmitAccMap Integer32
  uumWhereCompression INTEGER
  uumCompressionResetMode INTEGER
  uumMinCompressionSize Integer32
  uumLocationType INTEGER
  uumIp INTEGER
  uumIpx INTEGER
  uumFilterZones INTEGER
  uumFilterIdOutput OCTET STRING
  uumAppletalk INTEGER
  uumBridging INTEGER
  uumSpoofing INTEGER
  uumHostType INTEGER
  uumSendName OCTET STRING
  uumSendPassword OCTET STRING
  uumStartTime DateAndTime
  uumEndTime DateAndTime
  uumSendScript1 OCTET STRING
  uumReplyScript1 OCTET STRING
  uumSendScript2 OCTET STRING
  uumReplyScript2 OCTET STRING
  uumSendScript3 OCTET STRING
  uumReplyScript3 OCTET STRING
  uumSendScript4 OCTET STRING
  uumReplyScript4 OCTET STRING
  uumSendScript5 OCTET STRING
  uumReplyScript5 OCTET STRING
  uumSendScript6 OCTET STRING
  uumReplyScript6 OCTET STRING
  uumTerminalType OCTET STRING
  uumAppletalkNetworkRange OCTET STRING
  uumLocalIpAddress IpAddress
  uumRoutingProtocol INTEGER
  uumCallbackNumberTwo OCTET STRING
  uumModemGroup OCTET STRING
  uumIpxRouting INTEGER
  uumIpxWan INTEGER
  uumIpRipSendDefault INTEGER
  uumIpRipSendRoutes INTEGER
  uumIpRipSendSubnets INTEGER
  uumIpRipAcceptDefault INTEGER
  uumIpRipSplitHorizon INTEGER
  uumIpRipPoisonReverse INTEGER
  uumIpRipFlashUpdate INTEGER
  uumIpRipSimpleAuth INTEGER
  uumIpRipV1Send INTEGER
  uumIpRipV1Receive INTEGER
  uumIpRipV2Receive INTEGER
  uumIpRipSilent INTEGER
  uumSimpleAuthPassword OCTET STRING
  uumIpDefaultRouteOption INTEGER
  uumIpRoutingRipV1 INTEGER
  uumIpRoutingRipV2 INTEGER
  uumIpRoutingOspf INTEGER
  uumOspfAddresslessIfIndex Integer32
  uumIpSecPolicyFile DisplayString
  uumIpSecPolicyAccess INTEGER
  uumIpSecPolicyType INTEGER
  uumIpSecPolicyConfiguration INTEGER
  uumLoginHostName OCTET STRING
  uumIgmpInterfaceQueryInterval Integer32
  uumIgmpInterfaceQueryMaxResponseTime Integer32
  uumIgmpInterfaceVersion Integer32
  uumIgmpInterfaceRobustness Integer32
  uumIgmpInterfaceStatus INTEGER
  uumIgmpInterfaceMcastFwdEnabled INTEGER
  uumIpxRipUpdate Integer32
  uumIpxRipAgeMultiplier Integer32
  uumIpxSapUpdate Integer32
  uumIpxSapAgeMultiplier Integer32
  uumEncryptionAlgorithm INTEGER
  uumTunnelType INTEGER
  uumTunnelMediumType INTEGER
  uumTunnelClientEndpoint OCTET STRING
  uumTunnelServerEndpoint OCTET STRING
  uumTunnelPassword OCTET STRING
  uumTunnelPrivateGroupID OCTET STRING
  uumTunnelSecurity INTEGER
  uumPrimaryDNSServer IpAddress
  uumSecondaryDNSServer IpAddress
  uumUserTapStatus INTEGER
  uumUserTapFormat INTEGER
  uumUserTapOutput INTEGER
  uumUserTapFacility INTEGER
  uumUserTapLoglevel INTEGER
  uumUserTapAddress IpAddress
  uumMulticastProxy INTEGER
  uumNasIpAddress IpAddress
  uumNasPort Integer32
  uumFramedCallbackId Integer32
  uumState OCTET STRING
  uumClass OCTET STRING
  uumCalledStationId OCTET STRING
  uumCallingStationId OCTET STRING
  uumNasIdentifier OCTET STRING
  uumCipIfName OCTET STRING
  uumPPPLocalIpAddress IpAddress
  uumPPPRemoteIpAddress IpAddress
  uumSessionvars IpAddress
  uumChatScriptName OCTET STRING
  uumPortLimit Integer32
  uumPppSourceIpFilter Integer32
  uumCallbackType INTEGER
  uumIsdnDataCallType INTEGER
  uumDNISReAuth INTEGER
  uumReChapTimeout Integer32
  uumNextHopGateway IpAddress
  uumLocalTcpPort Integer32
  uumConnectionvars IpAddress
  uumShowConnVar Integer32
  uumSpecialXonXoff INTEGER
  uumTelnetOptions Integer32
  uumMlPPPFragThreshold Integer32
  uumVPNName OCTET STRING
  uumVPNID Integer32
  uumVPNGateway IpAddress
  uumTrafficThreshold Integer32
  uumTunnelAssignmentId OCTET STRING
  uumKeepAliveInterval Integer32
  uumTunnelClientAuthId OCTET STRING
  uumCorrelationId DisplayString

UumFramedRouteEntry  
SEQUENCE    
  uumFramedRouteUserName UsrUserName
  uumFramedRouteIpAddress IpAddress
  uumFramedRouteStatus INTEGER
  uumFramedRouteIpMask IpAddress
  uumFramedRouteIpGateway IpAddress
  uumFramedRouteIpMetric Integer32

UumAddrPoolEntry  
SEQUENCE    
  uumAddrPoolUserName UsrUserName
  uumAddrPoolName DisplayString
  uumAddrPoolStatus INTEGER

UumActiveSessionEntry  
SEQUENCE    
  uumActiveSessionUserName UsrUserName
  uumActiveSessionSessionId Integer32
  uumActiveSessionConnectionType INTEGER
  uumActiveSessionProtocolType INTEGER
  uumActiveSessionAction INTEGER
  uumActiveSessionIfName OCTET STRING
  uumActiveSessionIpAddress IpAddress
  uumActiveSessionConnTime Integer32
  uumActiveSessionIdleTime Integer32
  uumActiveSessionId Integer32
  uumSessionUserName UsrUserName
  uumActiveSessionInBytes Integer32
  uumActiveSessionOutBytes Integer32
  uumActiveSessionCallId OCTET STRING

UumAAAServersEntry  
SEQUENCE    
  uumAAAServersName DisplayString
  uumAAAServersPref Integer32
  uumAAAServerIpAddress IpAddress
  uumAAAServersSecret OCTET STRING
  uumAAAServersPort Integer32
  uumAAAServersEncryption INTEGER
  uumAAAServersState INTEGER
  uumAAAServersHostName UsrDisplayString
  uumAAAServersPassThru INTEGER
  uumAAAServersSourcePort Integer32
  uumAAAServersStatus INTEGER
  uumAAAServersMirrorGroup Integer32
  uumAAAServersAAAType INTEGER
  uumAAAServersProtocol INTEGER
  uumAAAServersTimeout Integer32
  uumAAAServersRetransmit Integer32
  uumAAAServersSuccessCount Counter32
  uumAAAServersFailureCount Counter32
  uumAAAServersNoResponseCount Counter32
  uumAAAServersContactInterval Integer32
  uumAAAServersOperationalStatus INTEGER
  uumAAAServersEnableNasRebootIndication INTEGER
  uumAAAServersRebootAckReceived INTEGER
  uumAAAServersMask INTEGER
  uumAAAServersSelectionMask UsrAAADisplay

UumAAADomainEntry  
SEQUENCE    
  uumAAADomainName UsrDisplayString
  uumAAADomainAAAType INTEGER
  uumAAADomainServersUnavail UsrDisplayString
  uumAAADomainSearchAlg INTEGER
  uumAAADomainDNSIpRotation INTEGER
  uumAAADomainInterimAccountingInterval Integer32
  uumAAADomainMirroring INTEGER
  uumAAADomainState INTEGER
  uumAAADomainStatus INTEGER
  uumAAADomainRebootAckReceived INTEGER

UsrUserManVTSTermEntry  
SEQUENCE    
  usrUserManVTSTermUserName UsrUserName
  usrUserManVTSTermSessionId OCTET STRING
  usrUserManVTSTermDynamic IpAddress
  usrUserManVTSTermSessionKey OCTET STRING
  usrUserManVTSTermAction INTEGER

UsrUserManVTSVerifyEntry  
SEQUENCE    
  usrUserManVTSVerifySessionId OCTET STRING
  usrUserManVTSVerifyUserName UsrUserName

UumNAIConfigEntry  
SEQUENCE    
  uumNAIIndex Integer32
  uumNAIMSIDType INTEGER
  uumNAIMSIDRangeMin Integer32
  uumNAIMSIDRangeMax Integer32
  uumNAIRealm DisplayString
  uumNAIStatus RowStatus
  uumNAIMSIDStrRangeMin OCTET STRING
  uumNAIMSIDStrRangeMax OCTET STRING
  uumNAIAuthType INTEGER

UumTODConfigEntry  
SEQUENCE    
  uumTODIndex Integer32
  uumTODHour Integer32
  uumTODMinute Integer32
  uumTODSecond Integer32
  uumTODStatus RowStatus

Defined Values

usrUserMan 2.2
The commWorks enterprise defined MIB objects for UserMan.
MODULE-IDENTITY    

usrUserManGroup 2.2.1
OBJECT IDENTIFIER    

usrUserManTraps 2.2.2
OBJECT IDENTIFIER    

usrUserManRadiusIP 2.2.1.1
The IP address of the RADIUS server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAltIP 2.2.1.2
The alternate IP address of the RADIUS server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctIP 2.2.1.3
The IP address of the RADIUS accounting server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctAltIP 2.2.1.4
The IP address of the RADIUS alternate accounting server
OBJECT-TYPE    
  IpAddress  

usrUserManLocalAuthSuccesses 2.2.1.5
The number of local authentication successes
OBJECT-TYPE    
  Counter32  

usrUserManLocalAuthFails 2.2.1.6
The number of local authentication failures
OBJECT-TYPE    
  Counter32  

usrUserManRadiusAuthSuccesses 2.2.1.7
The number of radius authentication successes
OBJECT-TYPE    
  Counter32  

usrUserManRadiusAuthFails 2.2.1.8
The number of radius authentication failures
OBJECT-TYPE    
  Counter32  

usrUserManLocalUsers 2.2.1.9
The number of local users
OBJECT-TYPE    
  Counter32  

usrUserManActiveUsers 2.2.1.10
The number of active users
OBJECT-TYPE    
  Counter32  

usrUserManRetransmissions 2.2.1.11
The number of udp packet retransmissions
OBJECT-TYPE    
  Counter32  

usrUserManUdpReceives 2.2.1.12
The number of udp packets received
OBJECT-TYPE    
  Counter32  

usrUserManRadiusRetrans 2.2.1.13
The maximum number of times a timeout will occur when communicating with radius The default value is 3.
OBJECT-TYPE    
  Integer32 0..100  

usrUserManRadiusTimeout 2.2.1.14
The maximum amount of time in seconds we will wait for a RADIUS response before retransmitting. The default value is 3.
OBJECT-TYPE    
  Integer32 1..60  

usrUserManAcctRetrans 2.2.1.15
The maximum number of times a timeout will occur when communicating with radius accounting server
OBJECT-TYPE    
  Integer32 0..2147483647  

usrUserManAcctTimeout 2.2.1.16
The maximum amount of time in seconds we will wait for a RADIUS accounting response before retransmitting. The value will be zero if not configured.
OBJECT-TYPE    
  Integer32 1..60  

usrUserManLocalAuth 2.2.1.17
Is local authentication on or off
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAcct 2.2.1.18
Is accounting on or off. Not accessible for Wireless products.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAcctServers 2.2.1.19
Do we want to consider both servers specified as primary Not accessible for Wireless products.
OBJECT-TYPE    
  INTEGER one(1), both(2)  

usrUserManRadiusAuth 2.2.1.20
Is radius authentication on or off
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManStartAccountTime 2.2.1.21
When do we want to account from
OBJECT-TYPE    
  INTEGER connectionTime(1), authenticationTime(2)  

usrUserManSnmpAccess 2.2.1.22
Do we allow snmp to set our user table
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

usrUserManSaveUsers 2.2.1.23
If we hit the save flag the users will be saved to flash
OBJECT-TYPE    
  INTEGER normal(0), save(2)  

usrUserManRadiusSecret 2.2.1.24
The shared secret between the RADIUS server and pilgrim. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManTable 2.2.1.25
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    UumEntry

uumEntry 2.2.1.25.1
To create an entry in the table the following data is required:- uumUserName, uumUserPassword, uumServiceType and uumStatus = enabled.
OBJECT-TYPE    
  UumEntry  

uumUserName 2.2.1.25.1.1
The users name
OBJECT-TYPE    
  UsrUserName  

uumStatus 2.2.1.25.1.2
The status field for the user. This must be set to 'enabled' when creating an entry after which it will automatically revert to inactive when the entry is created. For an existing user the only allowed values are delete(1) and disabled(5)
OBJECT-TYPE    
  INTEGER delete(1), inactive(2), active(3), enabled(4), disabled(5), active-disabled(6)  

uumUserPassword 2.2.1.25.1.3
The user's password. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

uumServiceType 2.2.1.25.1.4
The bitmap indicating one or more types of user: login 0x1, framed or network 0x2, callback or dialback 0x4, dial-out 0x8, administrative or manage 0x10, administrative- readonly or manage_readonly 0x20, and direct-modem-connect 0x40. DIALOUT and CALLBACK are mutually exclusive. CALLBACK cannot be set on its own it needs to be set as CALLBACK/LOGIN(0x05) or CALLBACK/NETWORK(0x06). MANAGE can only be SET via the CLI.
OBJECT-TYPE    
  Integer32  

uumFramedProtocol 2.2.1.25.1.5
The framed users protocol
OBJECT-TYPE    
  INTEGER ppp(1), slip(2), arap(3), frame-relay(4)  

uumFramedIpAddress 2.2.1.25.1.6
The IP destination for the framed user
OBJECT-TYPE    
  IpAddress  

uumFramedIpNetmask 2.2.1.25.1.7
The destinations netmask
OBJECT-TYPE    
  IpAddress  

uumFramedRouting 2.2.1.25.1.8
The routing defined for a framed user
OBJECT-TYPE    
  INTEGER none(0), broadcastRoutingPackets(1), listenForRoutingPackets(2), broadcastAndListen(3)  

uumFilterIdInput 2.2.1.25.1.9
The input or output filter defined for the user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumFramedMtu 2.2.1.25.1.10
The framed maximum transmission unit
OBJECT-TYPE    
  Integer32 0..8192  

uumFramedCompression 2.2.1.25.1.11
The compression being used for the framed user
OBJECT-TYPE    
  INTEGER none(0), tcpIpCompression(1), ipxCompression(2)  

uumLoginIpHost 2.2.1.25.1.12
The IP destination for the login user
OBJECT-TYPE    
  IpAddress  

uumLoginService 2.2.1.25.1.13
The login user's protocol
OBJECT-TYPE    
  INTEGER telnet(0), rlogin(1), tcp(2), lat(4), ping(1000)  

uumLoginPort 2.2.1.25.1.14
The tcp port the user will use
OBJECT-TYPE    
  Integer32 0..65535  

uumReplyMessage 2.2.1.25.1.15
The message to be displayed to the user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumCallbackNumberOne 2.2.1.25.1.16
The first phone number configured for this user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumExpiration 2.2.1.25.1.17
The users expiration date
OBJECT-TYPE    
  OCTET STRING Size(12)  

uumFramedRoute 2.2.1.25.1.18
The framed route for the user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumFramedIpxNetwork 2.2.1.25.1.19
The ipx network defined for the user
OBJECT-TYPE    
  OCTET STRING Size(4)  

uumSessionTimeout 2.2.1.25.1.20
The amount of time in seconds before time out
OBJECT-TYPE    
  Integer32 0..86400  

uumIdleTimeout 2.2.1.25.1.21
The amount of idle time in seconds before time out
OBJECT-TYPE    
  Integer32 0..86400  

uumBearerCapabilities 2.2.1.25.1.22
The type of transmission
OBJECT-TYPE    
  INTEGER digital(1), analog(2)  

uumSpeedOfConnection 2.2.1.25.1.23
The speed of the connection
OBJECT-TYPE    
  INTEGER auto(1), fifty-six-k(2), sixty-four-k(3), voice(4)  

uumMaxChannels 2.2.1.25.1.24
The maximum number of channels that may be used
OBJECT-TYPE    
  Integer32 0..16  

uumChannelExpansion 2.2.1.25.1.25
The percentage for channel expansion
OBJECT-TYPE    
  Integer32 0..100  

uumChannelDecrement 2.2.1.25.1.26
The percentage for channel decrement
OBJECT-TYPE    
  Integer32 0..100  

uumExpansionAlgorithm 2.2.1.25.1.27
The expansion algorithm being used
OBJECT-TYPE    
  INTEGER constant(1), linear(2)  

uumCompressionAlgorithm 2.2.1.25.1.28
The compression algorithm to be used
OBJECT-TYPE    
  INTEGER none(0), stac(1), ascend(2), microsoft(3), auto(4), deflate(5)  

uumReceiveAccMap 2.2.1.25.1.29
The receive acc mapping
OBJECT-TYPE    
  Integer32  

uumTransmitAccMap 2.2.1.25.1.30
The transmit acc mapping
OBJECT-TYPE    
  Integer32  

uumWhereCompression 2.2.1.25.1.31
The area where compression should be done
OBJECT-TYPE    
  INTEGER link(1), bundle(2)  

uumCompressionResetMode 2.2.1.25.1.32
The mode that the compression should be reset in
OBJECT-TYPE    
  INTEGER auto(1), resetEveryPacket(2), resetEveryError(3)  

uumMinCompressionSize 2.2.1.25.1.33
The minimum size for compression
OBJECT-TYPE    
  Integer32 0..2048  

uumLocationType 2.2.1.25.1.34
The type of location user
OBJECT-TYPE    
  INTEGER continuous(1), onDemand(2), manual(3), timed(4)  

uumIp 2.2.1.25.1.35
Ip enabled or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumIpx 2.2.1.25.1.36
Ipx enabled or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumFilterZones 2.2.1.25.1.37
Arap needed to define filter zones
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumFilterIdOutput 2.2.1.25.1.38
The output filter defined for the user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumAppletalk 2.2.1.25.1.39
Appletalk enabled or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumBridging 2.2.1.25.1.40
Bridging enabled or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumSpoofing 2.2.1.25.1.41
Ipx spoofing enabled or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumHostType 2.2.1.25.1.42
The means for specifying a host for this user
OBJECT-TYPE    
  INTEGER prompt(1), default(2), specified(3)  

uumSendName 2.2.1.25.1.43
Name we use when challenged for authentication
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumSendPassword 2.2.1.25.1.44
Password we use when challenged for authentication. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumStartTime 2.2.1.25.1.45
Daily time we start timed location. Not applicable to wireless users.
OBJECT-TYPE    
  DateAndTime  

uumEndTime 2.2.1.25.1.46
Daily time we stop timed location. Not applicable to wireless users.
OBJECT-TYPE    
  DateAndTime  

uumSendScript1 2.2.1.25.1.47
The first send script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumReplyScript1 2.2.1.25.1.48
The first reply script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumSendScript2 2.2.1.25.1.49
The second send script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumReplyScript2 2.2.1.25.1.50
The second reply script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumSendScript3 2.2.1.25.1.51
The third send script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumReplyScript3 2.2.1.25.1.52
The third reply script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumSendScript4 2.2.1.25.1.53
The fourth send script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumReplyScript4 2.2.1.25.1.54
The fourth reply script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumSendScript5 2.2.1.25.1.55
The fifth send script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumReplyScript5 2.2.1.25.1.56
The fifth reply script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumSendScript6 2.2.1.25.1.57
The sixth send script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumReplyScript6 2.2.1.25.1.58
The sixth reply script for this dial-out user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumTerminalType 2.2.1.25.1.59
The terminal type for the user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumAppletalkNetworkRange 2.2.1.25.1.60
The appletalk network range for the user
OBJECT-TYPE    
  OCTET STRING Size(4)  

uumLocalIpAddress 2.2.1.25.1.61
The local ip address configured for a dial-out user
OBJECT-TYPE    
  IpAddress  

uumRoutingProtocol 2.2.1.25.1.62
The routing protocol configured for a user
OBJECT-TYPE    
  INTEGER rip1(1), rip2(2)  

uumCallbackNumberTwo 2.2.1.25.1.63
The second phone number configured for this user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumModemGroup 2.2.1.25.1.64
The modem group string for the user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumIpxRouting 2.2.1.25.1.65
The ipx routing defined for a framed user
OBJECT-TYPE    
  INTEGER none(0), send(1), listen(2), respond(3), all(4)  

uumIpxWan 2.2.1.25.1.66
Is ipx wan enabled or disabled for the user
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSendDefault 2.2.1.25.1.67
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSendRoutes 2.2.1.25.1.68
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSendSubnets 2.2.1.25.1.69
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipAcceptDefault 2.2.1.25.1.70
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSplitHorizon 2.2.1.25.1.71
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipPoisonReverse 2.2.1.25.1.72
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipFlashUpdate 2.2.1.25.1.73
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSimpleAuth 2.2.1.25.1.74
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipV1Send 2.2.1.25.1.75
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipV1Receive 2.2.1.25.1.76
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipV2Receive 2.2.1.25.1.77
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSilent 2.2.1.25.1.78
IP RIP flag
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumSimpleAuthPassword 2.2.1.25.1.79
The IP RIP simple authentication password
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

uumIpDefaultRouteOption 2.2.1.25.1.80
If enable (1) a default route will be created using the remote users IP address. If disable (2) no such route is created.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumLoginHostName 2.2.1.25.1.81
The destination host name for the login user
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumIgmpInterfaceQueryInterval 2.2.1.25.1.82
The frequency at which IGMP Host-Query packets are transmitted on this interface.
OBJECT-TYPE    
  Integer32 1..65535  

uumIgmpInterfaceQueryMaxResponseTime 2.2.1.25.1.83
The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster.
OBJECT-TYPE    
  Integer32 1..10  

uumIgmpInterfaceRobustness 2.2.1.25.1.84
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lousy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
OBJECT-TYPE    
  Integer32 1..5  

uumIgmpInterfaceVersion 2.2.1.25.1.85
The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster.
OBJECT-TYPE    
  Integer32 1..2  

uumIgmpInterfaceStatus 2.2.1.25.1.86
If enabled, Multicast packets will be routed on this user's interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumIgmpInterfaceMcastFwdEnabled 2.2.1.25.1.87
If enabled Multicast packets will be forwarded on this user's interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumIpxRipUpdate 2.2.1.25.1.88
The IPX RIP update interval in seconds
OBJECT-TYPE    
  Integer32 30..86400  

uumIpxRipAgeMultiplier 2.2.1.25.1.89
The IPX RIP multiplier for information received in periodic updates
OBJECT-TYPE    
  Integer32 1..1080  

uumIpxSapUpdate 2.2.1.25.1.90
The IPX SAP update interval in seconds
OBJECT-TYPE    
  Integer32 30..86400  

uumIpxSapAgeMultiplier 2.2.1.25.1.91
The IPX SAP multiplier for information received in periodic updates
OBJECT-TYPE    
  Integer32 1..1080  

uumEncryptionAlgorithm 2.2.1.25.1.92
The encryption algorithm to be used
OBJECT-TYPE    
  INTEGER none(0), auto(1), microsoft40bit(2), microsoft128bit(3), required(4), microsoft56bit(5)  

uumTunnelType 2.2.1.25.1.93
The tunneling protocol to be used for this user
OBJECT-TYPE    
  INTEGER none(0), pptp(1), l2f(2), l2tp(3), atmp(4), vtp(5), ah(6), ip-ip(7), min-ip-ip(8), esp(9), gre(10), dvs(11), ip-in-ip(12)  

uumTunnelMediumType 2.2.1.25.1.94
This object indicates which transport medium to use when creating a tunnel for those protocols (such as L2TP) that can operate over multiple transports.
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), nsap(3), hdlc(4), bbn1822(5), e802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appletalk(12), decnetIV(13), banyanVines(14), e164NSAP(15)  

uumTunnelClientEndpoint 2.2.1.25.1.95
The address of the initiator end of the tunnel.
OBJECT-TYPE    
  OCTET STRING Size(0..33)  

uumTunnelServerEndpoint 2.2.1.25.1.96
The address of the server end of the tunnel.
OBJECT-TYPE    
  OCTET STRING Size(0..33)  

uumTunnelPassword 2.2.1.25.1.97
The password of the tunnel. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

uumTunnelPrivateGroupID 2.2.1.25.1.98
The group ID for the tunneled session.
OBJECT-TYPE    
  OCTET STRING Size(0..12)  

uumTunnelSecurity 2.2.1.25.1.99
The security level of the tunnel.
OBJECT-TYPE    
  INTEGER none(0), control-Only(1), data-Only(2), both-Data-And-Control(3)  

uumPrimaryDNSServer 2.2.1.25.1.100
The primary dns server for the user
OBJECT-TYPE    
  IpAddress  

uumSecondaryDNSServer 2.2.1.25.1.101
The secondary DNS server for the user
OBJECT-TYPE    
  IpAddress  

uumUserTapStatus 2.2.1.25.1.102
Is this user to be tapped
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

uumUserTapFormat 2.2.1.25.1.103
The tap format if tap is enabled
OBJECT-TYPE    
  INTEGER ascii(0), hex(1), clear(2)  

uumUserTapOutput 2.2.1.25.1.104
Send the tapped output to syslog
OBJECT-TYPE    
  INTEGER syslog(0)  

uumUserTapFacility 2.2.1.25.1.105
The syslog facility to send the output to.
OBJECT-TYPE    
  INTEGER auth(1), level0(2), level1(3), level2(4), level3(5), level4(6), level5(7), level6(8), level7(9)  

uumUserTapLoglevel 2.2.1.25.1.106
The syslog level to send the output to.
OBJECT-TYPE    
  INTEGER critical(0), unusual(1), common(2), verbose(3)  

uumUserTapAddress 2.2.1.25.1.107
The syslogd address
OBJECT-TYPE    
  IpAddress  

uumMulticastProxy 2.2.1.25.1.108
If Multicast will be proxied
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumNasIpAddress 2.2.1.25.1.113
The NAS IP address
OBJECT-TYPE    
  IpAddress  

uumNasPort 2.2.1.25.1.114
The NAS Port Attribute
OBJECT-TYPE    
  Integer32  

uumFramedCallbackId 2.2.1.25.1.115
Framed Callback Identifier attribute
OBJECT-TYPE    
  Integer32  

uumState 2.2.1.25.1.116
State attribute
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

uumClass 2.2.1.25.1.117
Class attribute
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

uumCalledStationId 2.2.1.25.1.118
Called Station Id
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

uumCallingStationId 2.2.1.25.1.119
Calling Station Id
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

uumNasIdentifier 2.2.1.25.1.120
NAS ID
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

uumCipIfName 2.2.1.25.1.121
CIP Interface Name
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

uumPPPLocalIpAddress 2.2.1.25.1.122
PPP Local IP Address
OBJECT-TYPE    
  IpAddress  

uumPPPRemoteIpAddress 2.2.1.25.1.123
PPP Remote IP Address
OBJECT-TYPE    
  IpAddress  

uumSessionvars 2.2.1.25.1.126
Tok_String
OBJECT-TYPE    
  IpAddress  

uumChatScriptName 2.2.1.25.1.127
The chat script name configured for the user
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

uumPortLimit 2.2.1.25.1.128
Tok_String
OBJECT-TYPE    
  Integer32  

uumPppSourceIpFilter 2.2.1.25.1.129
PPP Source Address Ip Filer
OBJECT-TYPE    
  Integer32  

uumCallbackType 2.2.1.25.1.131
The Callback Type. Normal to dial callback users using the existing phone number field. ANI to dial callback users using the number supplied with the caller ID. Static to dial callback users using the numbers provided in the DialGroup specified for this user. Dynamic to dial callback users using the numbers provided during LCP negotiations.
OBJECT-TYPE    
  INTEGER normal(1), ani(2), static(3), dynamic(4)  

uumIsdnDataCallType 2.2.1.25.1.132
The ISDN customized CallType. The values represent a series of AT commands that users of the profile can generate. For 'cleared' no AT command will be generated. uumUserPassword required. dataovervoice *V2=3 S67.1=0 restricted56k *V2=4 S67.1=1 S67.2=0 v11056k *V2=2 S67.1=1 S67.2=0 unrestricted64k *V2=4 S67.1=1 S67.2=1 asynctosyncppp *V2=5 S67.1=0 where *V2=2 -> V.110 Rate Adaption only =3 -> Modem/Fax Emulation only =4 -> Clear Channel only =5 -> Async to sync PPP S67.1=0 -> Rate not fixed =1 -> Rate fixed S67.2=0 -> Connect at 56k =1 -> Connect at 64k
OBJECT-TYPE    
  INTEGER notConfigured(0), cleared(1), dataovervoice(2), restricted56k(3), v11056k(4), unrestricted64k(5), asynctosyncppp(6)  

uumDNISReAuth 2.2.1.25.1.139
DNIS Re-Authentication flag
OBJECT-TYPE    
  INTEGER none(0), any(1), chap(2), eap(3), mschap(4), pap(5), proxyEap(6)  

uumReChapTimeout 2.2.1.25.1.140
Re Chap timeout for PPP
OBJECT-TYPE    
  Integer32  

uumNextHopGateway 2.2.1.25.1.130
The VPN-neighbour.
OBJECT-TYPE    
  IpAddress  

uumLocalTcpPort 2.2.1.25.1.141
Local TCP port of telnet/CTCP login user
OBJECT-TYPE    
  Integer32  

uumConnectionvars 2.2.1.25.1.144
Tok_String
OBJECT-TYPE    
  IpAddress  

uumShowConnVar 2.2.1.25.1.145
For the CLI command show connection
OBJECT-TYPE    
  Integer32  

uumSpecialXonXoff 2.2.1.25.1.160
Special Xon Xoff flow control
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

uumTelnetOptions 2.2.1.25.1.161
User specific Telnet Options
OBJECT-TYPE    
  Integer32  

uumMlPPPFragThreshold 2.2.1.25.1.165
Multilink fragmentation threshold
OBJECT-TYPE    
  Integer32 64..4096  

uumIpRoutingRipV1 2.2.1.25.1.133
Enables or disables the IP RIPv1 routing protocol for this User
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRoutingRipV2 2.2.1.25.1.134
Enables or disables the IP RIPv2 routing protocol for this User
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRoutingOspf 2.2.1.25.1.135
Enables or disables the IP OSPF routing protocol for this User
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumOspfAddresslessIfIndex 2.2.1.25.1.136
An arbitary 32-bit integer value defined by the user to be used with Addressless interfaces. This addresslessIfIndex will bind with the configured OSPF INTF addresslessIfIndex, if one was configured.
OBJECT-TYPE    
  Integer32  

uumIpSecPolicyFile 2.2.1.25.1.155
The name of IP Security Policy filename associated with that user. This feature is available from Hiper ARC 5.0 release onwards.
OBJECT-TYPE    
  DisplayString Size(0..40)  

uumIpSecPolicyAccess 2.2.1.25.1.156
This flag defines whether the IP Security policy access is enabled or disabled. This feature is available from Hiper ARC 5.0 release onwards.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(0)  

uumIpSecPolicyType 2.2.1.25.1.157
This flag defines whether the IP Security policy type is user-based or domain-based. This feature is available from Hiper ARC 5.0 release onwards
OBJECT-TYPE    
  INTEGER domain-based(0), user-based(1)  

uumIpSecPolicyConfiguration 2.2.1.25.1.158
This flag specifies whether IP Security Policy is applied in statically or dynamically. This feature is available only from Hiper ARC 5.0 onwards.
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

uumVPNGateway 2.2.1.25.1.162
The VPN-Gateway.
OBJECT-TYPE    
  IpAddress  

uumVPNID 2.2.1.25.1.163
The VPN-ID.
OBJECT-TYPE    
  Integer32  

uumVPNName 2.2.1.25.1.164
The VPN-Name.
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

uumTrafficThreshold 2.2.1.25.1.167
traffic threshold based idle timeout
OBJECT-TYPE    
  Integer32  

uumTunnelAssignmentId 2.2.1.25.1.168
The name of the L2TP/PPTP tunnel that may be created for the user.
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

uumKeepAliveInterval 2.2.1.25.1.169
The TCP Keep Alive Interval in seconds
OBJECT-TYPE    
  Integer32 0..65535  

uumTunnelClientAuthId 2.2.1.25.1.174
Replaces the System Transmit Auth Name. This name is now sent instead of the System Xmit Auth Name by the PDSN to authenticate an L2TP tunnel
OBJECT-TYPE    
  OCTET STRING  

uumCorrelationId 2.2.1.25.1.176
Call Correlation Id
OBJECT-TYPE    
  DisplayString Size(1..128)  

usrUserManCfmFileName 2.2.1.26
The name of the configuration file
OBJECT-TYPE    
  DisplayString Size(1..32)  

usrUserManCfmSaveFlag 2.2.1.27
The Configuration File Manager Flag for saving user management scalars. The only value allowed for SET is save(2) and this is only allowed if the current value is normal(1).
OBJECT-TYPE    
  INTEGER normal(1), save(2), saving(3), load(4), loading(5)  

usrUserManRadiusPort 2.2.1.28
The udp port the primary radius server listens at
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAltPort 2.2.1.29
The udp port the alternate radius server listens at
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAltSecret 2.2.1.30
The shared secret between the alternate RADIUS server and pilgrim. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManFramedRouteTable 2.2.1.31
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    UumFramedRouteEntry

uumFramedRouteEntry 2.2.1.31.1
Tok_String
OBJECT-TYPE    
  UumFramedRouteEntry  

uumFramedRouteUserName 2.2.1.31.1.1
The users name
OBJECT-TYPE    
  UsrUserName  

uumFramedRouteIpAddress 2.2.1.31.1.2
The framed routing ip address for the user
OBJECT-TYPE    
  IpAddress  

uumFramedRouteStatus 2.2.1.31.1.3
The status field for the framed route
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumFramedRouteIpMask 2.2.1.31.1.4
The framed routing ip mask for the user
OBJECT-TYPE    
  IpAddress  

uumFramedRouteIpGateway 2.2.1.31.1.5
The framed routing ip gateway for the user
OBJECT-TYPE    
  IpAddress  

uumFramedRouteIpMetric 2.2.1.31.1.6
The framed routing ip metric for the user
OBJECT-TYPE    
  Integer32 1..16  

usrUserManRadiusAcctSecret 2.2.1.32
The radius secret for the primary accounting server. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManRadiusAcctAltSecret 2.2.1.33
The radius secret for the secondary accounting server. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManRadiusAcctPort 2.2.1.34
The radius port for the primary accounting server
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctAltPort 2.2.1.35
The radius port for the secondary accounting server
OBJECT-TYPE    
  Integer32 0..65535  

usrRadiusBusyOutEnabled 2.2.1.36
Is the Radius client regularly checking the contact time of the servers so that it can cause the modems to be busied out when the servers are unreachbale.
OBJECT-TYPE    
  TruthValue  

usrRadiusHelloFrequency 2.2.1.37
The number of seconds the system can go between messages from the RADIUS servers before it sends a Status-Server request to that server.
OBJECT-TYPE    
  Integer32 1..6000  

usrRadiusAuthState 2.2.1.38
If the system is tracking RADIUS servers for service loss busy-out, the state of those server.
OBJECT-TYPE    
  INTEGER start(1), up(2), losingContact(3), down(4), gainingContact(5)  

usrUserManAddrPoolTable 2.2.1.39
Table of address pools a user is configured for.
OBJECT-TYPE    
  SEQUENCE OF  
    UumAddrPoolEntry

uumAddrPoolEntry 2.2.1.39.1
An entry of an address pool that a user is configured for.
OBJECT-TYPE    
  UumAddrPoolEntry  

uumAddrPoolUserName 2.2.1.39.1.1
The users name
OBJECT-TYPE    
  UsrUserName  

uumAddrPoolName 2.2.1.39.1.2
The name of the address pool this user is configured for
OBJECT-TYPE    
  DisplayString Size(1..16)  

uumAddrPoolStatus 2.2.1.39.1.3
If set to active(2) user is configured to use this pool. If set to delet(1) this pool should be deleted from user's address pool list
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

usrRadiusAcctState 2.2.1.40
A debug value for debugging the service loss subsystem.
OBJECT-TYPE    
  INTEGER start(1), up(2), losingContact(3), down(4), gainingContact(5)  

usrRadiusAuthSecsMessage 2.2.1.41
A debug value for debugging the service loss subsystem.
OBJECT-TYPE    
  Integer32  

usrRadiusAcctSecsMessage 2.2.1.42
A debug value for debugging the service loss subsystem.
OBJECT-TYPE    
  Integer32  

usrRadiusAuthSecsState 2.2.1.43
A debug value for debugging the service loss subsystem.
OBJECT-TYPE    
  Integer32  

usrRadiusAcctSecsState 2.2.1.44
A debug value for debugging the service loss subsystem.
OBJECT-TYPE    
  Integer32  

usrUserManRadiusAuthNoResponse 2.2.1.45
The number of times radius fails to answer an authentication request
OBJECT-TYPE    
  Counter32  

usrUserManActiveSessionTable 2.2.1.46
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    UumActiveSessionEntry

uumActiveSessionEntry 2.2.1.46.1
Tok_String
OBJECT-TYPE    
  UumActiveSessionEntry  

uumActiveSessionUserName 2.2.1.46.1.1
The users name
OBJECT-TYPE    
  UsrUserName  

uumActiveSessionSessionId 2.2.1.46.1.2
The unique id for the active session
OBJECT-TYPE    
  Integer32  

uumActiveSessionConnectionType 2.2.1.46.1.3
The connection type for the active session
OBJECT-TYPE    
  INTEGER unknown(1), wan(2), lan(3)  

uumActiveSessionProtocolType 2.2.1.46.1.4
The protocol type for the active session
OBJECT-TYPE    
  INTEGER unknown(1), ppp(2), slip(3), arap(4), telnet(5), rlogin(6), cleartcp(7)  

uumActiveSessionAction 2.2.1.46.1.5
We need to be able to disconnect all users with a particular user name
OBJECT-TYPE    
  INTEGER disconnect(6)  

uumActiveSessionIfName 2.2.1.46.1.6
Interface Name
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

uumActiveSessionIpAddress 2.2.1.46.1.7
IP Address of the session. This can be Remote PPP IP address in the case of a framed user or the login host ip address if the user type is login.
OBJECT-TYPE    
  IpAddress  

uumActiveSessionConnTime 2.2.1.46.1.8
Session Connect Time
OBJECT-TYPE    
  Integer32  

uumActiveSessionIdleTime 2.2.1.46.1.9
Session Idle Time
OBJECT-TYPE    
  Integer32  

uumActiveSessionId 2.2.1.46.1.10
We need to display the sessionId
OBJECT-TYPE    
  Integer32  

uumSessionUserName 2.2.1.46.1.11
We need to display the username
OBJECT-TYPE    
  UsrUserName  

uumActiveSessionInBytes 2.2.1.46.1.12
Session Bytes Count - Input Bytes
OBJECT-TYPE    
  Integer32  

uumActiveSessionOutBytes 2.2.1.46.1.13
Session Bytes Count - Output Bytes
OBJECT-TYPE    
  Integer32  

uumActiveSessionCallId 2.2.1.46.1.14
Session Call ID
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

usrUserManSlotSpanChanOffset 2.2.1.47
Offset to add to modem's reported slot/span/channel when reporting this information. Default value is 1 for all platforms except Positron which uses a default of 0.
OBJECT-TYPE    
  Integer32 0..1  

usrUserManHintAssigned 2.2.1.48
Is the hint assigned feature enabled?
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAuthorEna 2.2.1.49
Is remote authorization on or off
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManTcpPacketsRx 2.2.1.50
The number of TCP packets received
OBJECT-TYPE    
  Counter32  

usrUserManTcpPacketsTx 2.2.1.51
The number of TCP packets transmitted
OBJECT-TYPE    
  Counter32  

usrUserManAAAServersTable 2.2.1.52
A table of AAA Servers configured. Several default servers are automatically entered. Adding a new entry requires the following objects to be defined:- uumAAAServersName uumAAAServersPref uumAAAServersAAAType
OBJECT-TYPE    
  SEQUENCE OF  
    UumAAAServersEntry

uumAAAServersEntry 2.2.1.52.1
Tok_String
OBJECT-TYPE    
  UumAAAServersEntry  

uumAAAServersName 2.2.1.52.1.1
Server name; max number of characters is 32.
OBJECT-TYPE    
  DisplayString  

uumAAAServersPref 2.2.1.52.1.2
Server preference. This object can be SET to value 1-100, 101-109 are reserved.
OBJECT-TYPE    
  Integer32 1..109  

uumAAAServerIpAddress 2.2.1.52.1.3
The IP address for the server
OBJECT-TYPE    
  IpAddress  

uumAAAServersSecret 2.2.1.52.1.4
The shared secret between the AAA server and client. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

uumAAAServersPort 2.2.1.52.1.5
The port the AAA server listens at. The default for AUTH type is 1812, for ACCO type the default is 1813.
OBJECT-TYPE    
  Integer32 1..65535  

uumAAAServersEncryption 2.2.1.52.1.6
Packet body encryption enabled or disabled. Disabling encryption works for TACACS+ clients only. The entire body will be sent as clear text. Obvious security concern.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

uumAAAServersState 2.2.1.52.1.7
Is the AAA server enable or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAServersHostName 2.2.1.52.1.8
The name of the AAA host to be resolved by DNS; current implementation range is 0-64
OBJECT-TYPE    
  UsrDisplayString Size(0..240)  

uumAAAServersPassThru 2.2.1.52.1.9
When enabled will allow users access to a domain even if they authentication fails. This object is used primarily with the direct request feature.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAServersSourcePort 2.2.1.52.1.10
The source port the AAA server listens at
OBJECT-TYPE    
  Integer32 0..65535  

uumAAAServersStatus 2.2.1.52.1.11
The status field for delete. SETting this value to 1 will delete the associated AAA Server. Reading this value is meaningless. active/inactive were deprecated as not applicable to wireless.
OBJECT-TYPE    
  INTEGER unknown(0), delete(1)  

uumAAAServersMirrorGroup 2.2.1.52.1.12
Mirror Group for this server; current implementation only supports from 1-10 and is applicable only to accounting server type.
OBJECT-TYPE    
  Integer32 0..65535  

uumAAAServersSelectionMask 2.2.1.52.1.13
The Selection mask for Server selection Note: This MIB is not supported anymore, a new MIB has been created for this purpose
OBJECT-TYPE    
  UsrAAADisplay  

uumAAAServersAAAType 2.2.1.52.1.14
AAA Server type. Can be Authentication/Accounting
OBJECT-TYPE    
  INTEGER auth(1), acco(2)  

uumAAAServersProtocol 2.2.1.52.1.15
AAA Server Protocol. For now can be TACACS+ or RADIUS
OBJECT-TYPE    
  INTEGER tacacsplus(1), radius(2)  

uumAAAServersTimeout 2.2.1.52.1.16
Timeout value for trying this server. Exceeding the time setting will lead to trying for the next server in the table. Current implementation only supports values 1-60
OBJECT-TYPE    
  Integer32 0..65535  

uumAAAServersRetransmit 2.2.1.52.1.17
The retry count or retransmission count for this server in the table. Current implementation only supports values 0-60.
OBJECT-TYPE    
  Integer32 0..65535  

uumAAAServersSuccessCount 2.2.1.52.1.18
The number of times radius fails to answer an authentication request
OBJECT-TYPE    
  Counter32  

uumAAAServersFailureCount 2.2.1.52.1.19
The number of times radius fails to answer an authentication request
OBJECT-TYPE    
  Counter32  

uumAAAServersNoResponseCount 2.2.1.52.1.20
The number of times there was a no response from the server for a AAA request
OBJECT-TYPE    
  Counter32  

uumAAAServersContactInterval 2.2.1.52.1.21
Number of seconds since the authentication server was last contacted.
OBJECT-TYPE    
  Integer32  

uumAAAServersOperationalStatus 2.2.1.52.1.22
Operational Status of Server during AUTH/ACCO
OBJECT-TYPE    
  INTEGER up(1), down(2)  

uumAAAServersEnableNasRebootIndication 2.2.1.52.1.23
Is the AAA server NAS Reboot Indication Enabled or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAServersRebootAckReceived 2.2.1.52.1.24
Did this domain receive reboot ack. Leave this last in the table
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

uumAAAServersMask 2.2.1.52.1.25
server selection mask
OBJECT-TYPE    
  INTEGER left(1), right(2), all(3)  

usrUserManDirectRequestStatus 2.2.1.53
Is direct request on or off. Not applicable to Wireless products.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManDirectRequestDelimiter 2.2.1.54
The delimiter string for the direct request service Not applicable to Wireless products.
OBJECT-TYPE    
  UsrAAADisplay  

usrUserManDirectRequestTimeout 2.2.1.55
Timeout feature for the direct request service Not applicable to Wireless products.
OBJECT-TYPE    
  Integer32 0..30  

usrUserManRadiusVSA 2.2.1.56
Vendor Specific Attribute for the compatibility of Sprint CISCO Server. The default is enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManRadiusAcctVSA 2.2.1.57
Vendor Specific Attribute for the compatibility of Sprint CISCO Server. The default is enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAAADomainTable 2.2.1.67
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    UumAAADomainEntry

uumAAADomainEntry 2.2.1.67.1
A table of AAA Domain Servers configured. Several default servers are automatically entered. Adding a new entry requires the following objects to be defined:- uumAAADomainName uumAAADomainAAAType uumAAADomainState
OBJECT-TYPE    
  UumAAADomainEntry  

uumAAADomainName 2.2.1.67.1.1
The name of the AAA domain. Currently restricted to 32 characters in PDSN.
OBJECT-TYPE    
  UsrDisplayString  

uumAAADomainAAAType 2.2.1.67.1.2
AAA Server type. Can be Authorizing/Accounting/AAA
OBJECT-TYPE    
  INTEGER auth(1), acco(2)  

uumAAADomainServersUnavail 2.2.1.67.1.3
This is the default behaviour/server if other servers are unavailable. It can be DENY/PERMIT or the Server Name. If it is the Server Name it is an Alphanumeric string. It must begin with a letter or digit, contain letters, digits, '.' or '-' and end with a letter or digit.
OBJECT-TYPE    
  UsrDisplayString Size(0..64)  

uumAAADomainSearchAlg 2.2.1.67.1.4
Domain Server Search Algorithm
OBJECT-TYPE    
  INTEGER fall-Through(1), round-Robin(2), active-server(3), preferred(4), load-balancing(5)  

uumAAADomainDNSIpRotation 2.2.1.67.1.5
Indicates whether this domain should be looked up using DNS.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAADomainInterimAccountingInterval 2.2.1.67.1.6
Checkpoint Interval for looking up this domain. Exceeding the time setting will lead to trying for the next domain in the table. Current PDSN implementation supports range of 5-3600.
OBJECT-TYPE    
  Integer32 0..65535  

uumAAADomainMirroring 2.2.1.67.1.7
Indicates whether the information for this domain is mirrored or not.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAADomainState 2.2.1.67.1.8
Is this domain enabled to be used ?
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumAAADomainStatus 2.2.1.67.1.9
Used to delete an entry. Reading this alue is meaningless. active/inactive deprecated as inapplicable to wireless.
OBJECT-TYPE    
  INTEGER unknown(0), delete(1)  

uumAAADomainRebootAckReceived 2.2.1.67.1.10
Did this domain receive reboot ack. Leave this last in the table
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

uumAAAGlobalSelectionMask 2.2.1.68
The Selection mask for Server selection Note: This MIB is not supported anymore, a new MIB has been created for this purpose
OBJECT-TYPE    
  UsrAAADisplay  

uumAAAGlobalServersUnavail 2.2.1.69
Behaviour if servers are unavailable. Action can be DENY, PERMIT or If it is a Domain Name it is an Alphanumeric string. It must begin with a letter or digit, contain letters, digits, '.' or '-' and end with a letter or digit. Current implementation only supports 0..64
OBJECT-TYPE    
  UsrDisplayString Size(0..240)  

uumAAAGlobalSearchAlg 2.2.1.70
Domain Server Search Algorithm
OBJECT-TYPE    
  INTEGER fall-Through(1), round-Robin(2), load-Balancing(3)  

uumAAAGlobalDNSIpRotation 2.2.1.71
Should this domain be looked up using DNS ?
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAGlobalMirroring 2.2.1.73
Should this Domain info. be mirrored ?
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAGlobalEnableLogUnauthenticatedCalls 2.2.1.245
Is the AAA Global Log Unauthenticated Calls Enabled or disabled. The default is enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAGlobalEnableUseAAAUserName 2.2.1.246
Is the AAA Global Use AAA USER NAME is Enabled or disabled. The default is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAGlobalRealmPassword 2.2.1.229
The password for the user send to RADIUS realm directed req case. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManReportedPortDensity 2.2.1.90
Used as slot multiplier for modem slot when reporting RADIUS NAS-PORT attribute. The reported NAS-PORT attribute for a call is computed as: * usrUserManReportedPortDensity + + usrUserManSlotSpanChanOffset This can be used to achieve a dense NAS-PORT # mapping for a chassis with uniform modem port density. Note that it is possible to configure this attribute such that eroneous aliasing of NAS-PORT #s are generated if the ReportPortDensity is set < the systems true port density. Default value is 256.
OBJECT-TYPE    
  Integer32 1..256  

usrUserManFillNullAttributes 2.2.1.91
This is the switch to enable/disable Filling of Null Attributes in Radius Accounting records
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

usrUserManRadiusSrcPort 2.2.1.92
The source udp port the primary radius server binds to
OBJECT-TYPE    
  Integer32 1..65535  

usrUserManRadiusAcctSrcPort 2.2.1.93
The source radius port for the primary accounting server
OBJECT-TYPE    
  Integer32 1..65535  

usrUserManRadiusTertiaryIP 2.2.1.94
The tertiary IP address of the RADIUS server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusTertiarySecret 2.2.1.95
The radius secret for the tertiary server. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManRadiusTertiaryPort 2.2.1.96
The udp port the tertiary radius server listens at
OBJECT-TYPE    
  Integer32 0..65535  

usrRadiusAuthAlgorithm 2.2.1.97
Takes either the Fall-through or Round-robin algorithm for re-tries
OBJECT-TYPE    
  INTEGER fallthrough(1), roundrobin(2), activeserver(3), prefered(4)  

usrRadiusAttributeStyle 2.2.1.98
Takes STANDARD or ASCEND style for attribute values
OBJECT-TYPE    
  INTEGER standard(1), ascend(2), mci(4)  

usrRadiusInterimAccountingIntervalEnabled 2.2.1.99
Indicates whether checkpoint accounting is enabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrRadiusInterimAccountingInterval 2.2.1.100
The time intervals when acct. info is sent to the servers
OBJECT-TYPE    
  Integer32 5..3600  

usrUserManPrimAcctStatus 2.2.1.101
Is priamary accounting on or off
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManSecAcctStatus 2.2.1.102
Is secondary accounting on or off
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManRadiusAcctFirstBackupIP 2.2.1.103
The IP address of the Primary RADIUS First backup accounting server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctSecondBackupIP 2.2.1.104
The IP address of the Primary RADIUS Second backup accounting server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctAltFirstBackupIP 2.2.1.105
The IP address of the Secondary RADIUS First backup accounting server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctAltSecondBackupIP 2.2.1.106
The IP address of the Secondary RADIUS Second backup accounting server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctFirstBackupSecret 2.2.1.107
The radius secret for the primary first backup accounting server Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManRadiusAcctSecondBackupSecret 2.2.1.108
The radius secret for the primary second backup accounting server. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManRadiusAcctAltFirstBackupSecret 2.2.1.109
The radius secret for the secondary first backup accounting server. Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManRadiusAcctAltSecondBackupSecret 2.2.1.110
The radius secret for the secondary second backup accounting server Reading this object will return NULL.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManRadiusAcctFirstBackupPort 2.2.1.111
The radius port for the primary first backup accounting server
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctSecondBackupPort 2.2.1.112
The radius port for the primary second backup accounting server
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctAltFirstBackupPort 2.2.1.113
The radius port for the secondary first backup accounting server
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctAltSecondBackupPort 2.2.1.114
The radius port for the secondary second backup accounting server
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctRoundRobinCount 2.2.1.115
The number of times the servers are switched in the primary server group
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctAltRoundRobinCount 2.2.1.116
The number of times the servers are switched in the secondary server group
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctPacketDiscardCount 2.2.1.117
The number of packets discarded in the primary server group
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctAltPacketDiscardCount 2.2.1.118
The number of packets discarded in the secondary server group
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctQueuePercentFull 2.2.1.119
Percentage of the queue filled in the primary server group
OBJECT-TYPE    
  Integer32 0..100  

usrUserManRadiusAcctAltQueuePercentFull 2.2.1.120
Percentage of the queue filled in the secondary server group
OBJECT-TYPE    
  Integer32 0..100  

usrUserManRadiusAcctOutstandingPacketCount 2.2.1.121
The number of packets outstanding in the primary server group
OBJECT-TYPE    
  Integer32 0..65535  

usrUserManRadiusAcctAltOutstandingPacketCount 2.2.1.122
The number of packets outstanding in the primary server group
OBJECT-TYPE    
  Integer32 0..65535  

usrTacacsAcctAttrList 2.2.1.123
Specifies the tacacs+ accounting attribute lists requested from different customer like SPRINT ....
OBJECT-TYPE    
  INTEGER all(1), simple(2), sprint(3)  

usrUserManAcctAltRetrans 2.2.1.124
The maximum number of times a timeout will occur for a secondary server when communicating with radius accounting server
OBJECT-TYPE    
  INTEGER 0..2147483647  

usrUserManLogUnauthenticatedCalls 2.2.1.125
If enabled, all unauthenticated calls will generate a Stop Accounting-Request. If disabled, no Stop Accounting-Requests will be sent.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManRadiusActiveAuthIP 2.2.1.126
The IP address of the Active RADIUS Authentication Server
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusActiveAcctIPFirst 2.2.1.127
The IP address of the Active RADIUS Accounting Server of First Group
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusActiveAcctIPSecond 2.2.1.128
The IP address of the Active RADIUS Accounting Server of Second Group
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusFirstBackupAuthSuccesses 2.2.1.129
The number of first backup radius server authentication successes
OBJECT-TYPE    
  Counter32  

usrUserManRadiusFirstBackupAuthFails 2.2.1.130
The number of first backup radius server authentication failures
OBJECT-TYPE    
  Counter32  

usrUserManRadiusSecondBackupAuthSuccesses 2.2.1.131
The number of secondary backup radius server authentication successes
OBJECT-TYPE    
  Counter32  

usrUserManRadiusSecondBackupAuthFails 2.2.1.132
The number of secondary backup radius server authentication failures
OBJECT-TYPE    
  Counter32  

usrUserManRadiusFirstBackupAuthNoResponse 2.2.1.133
The number of times first backup radius server fails to answer an authentication request
OBJECT-TYPE    
  Counter32  

usrUserManRadiusSecondBackupAuthNoResponse 2.2.1.134
The number of times secondary backup radius server fails to answer an authentication request
OBJECT-TYPE    
  Counter32  

usrUserManRadiusCounterResetTime 2.2.1.135
Daily time we reset all the authentication counter contains to value zero
OBJECT-TYPE    
  DateAndTime  

usrUserManRadiusResetAuthCountersToZero 2.2.1.136
An user action to reset all the authentication counter contains to value zero
OBJECT-TYPE    
  Integer32  

usrUserManRadiusAcctCounterResetTime 2.2.1.137
Daily time we reset all the accounting counter contains to value zero
OBJECT-TYPE    
  DateAndTime  

usrUserManRadiusResetAcctCountersToZero 2.2.1.138
An user action to reset all the accounting counter contains to value zero
OBJECT-TYPE    
  Integer32  

usrUserManVTSTermTable 2.2.1.139
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    UsrUserManVTSTermEntry

usrUserManVTSTermEntry 2.2.1.139.1
Tok_String
OBJECT-TYPE    
  UsrUserManVTSTermEntry  

usrUserManVTSTermUserName 2.2.1.139.1.1
The users name
OBJECT-TYPE    
  UsrUserName  

usrUserManVTSTermSessionId 2.2.1.139.1.2
The unique id for the active session
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

usrUserManVTSTermDynamic 2.2.1.139.1.3
The dynamic IP address for the active session
OBJECT-TYPE    
  IpAddress  

usrUserManVTSTermSessionKey 2.2.1.139.1.4
A unique key to identify the active session
OBJECT-TYPE    
  OCTET STRING Size(16)  

usrUserManVTSTermAction 2.2.1.139.1.5
The action to perform on the active session.
OBJECT-TYPE    
  INTEGER disconnectSession(1)  

usrUserManVTSVerifyTable 2.2.1.140
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    UsrUserManVTSVerifyEntry

usrUserManVTSVerifyEntry 2.2.1.140.1
Tok_String
OBJECT-TYPE    
  UsrUserManVTSVerifyEntry  

usrUserManVTSVerifySessionId 2.2.1.140.1.1
The unique id for the active session
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

usrUserManVTSVerifyUserName 2.2.1.140.1.2
The users name
OBJECT-TYPE    
  UsrUserName  

usrUserManMaxLocalUsers 2.2.1.141
Maximum Local users that may be supported on the card
OBJECT-TYPE    
  Integer32  

usrUserManRadiusSrcPortAuth 2.2.1.142
This flag state whether to use check the response radius source port same at that configured in the system. The default value is TRUE
OBJECT-TYPE    
  TruthValue  

usrUserManRadiusUseRadUsername 2.2.1.143
This flag states whether to use the radius supplied username in the access-accept packet to override the username in the request packet. The default value is FALSE.
OBJECT-TYPE    
  TruthValue  

usrResourceMgmtState 2.2.1.144
Whether the Resource Management is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrResourceMgmtQueriesReceivedPrimary 2.2.1.145
Number of Resource Management Queries received from the Primary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtQueryResponsesPrimary 2.2.1.146
Number of Resource Management Query Responses sent to the Primary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtReclaimsReceivedPrimary 2.2.1.147
Number of Resource Management Reclaims received from the Primary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtFreeSendPrimary 2.2.1.148
Number of successful Resource Management Frees sent to the Primary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtFreeRexmitPrimary 2.2.1.149
Number of Resource Management Frees retransmitted to the Primary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtQueriesReceivedSecondary 2.2.1.150
Number of Resource Management Queries received from the Secondary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtQueryResponsesSecondary 2.2.1.151
Number of Resource Management Query Responses sent to the Secondary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtReclaimsReceivedSecondary 2.2.1.152
Number of Resource Management Reclaims received from the Secondary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtFreeSendSecondary 2.2.1.153
Number of successful Resource Management Frees sent to the Secondary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtFreeRexmitSecondary 2.2.1.154
Number of Resource Management Frees retransmitted to the Secondary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtQueriesReceivedTertiary 2.2.1.155
Number of Resource Management Queries received from the Tertiary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtQueryResponsesTertiary 2.2.1.156
Number of Resource Management Query Responses sent to the Tertiary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtReclaimsReceivedTertiary 2.2.1.157
Number of Resource Management Reclaims received from the Tertiary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtFreeSendTertiary 2.2.1.158
Number of successful Resource Management Frees sent to the Tertiary server.
OBJECT-TYPE    
  Integer32  

usrResourceMgmtFreeRexmitTertiary 2.2.1.159
Number of Resource Management Frees retransmitted to the Tertiary server.
OBJECT-TYPE    
  Integer32  

usrResetResourceMgmtCountersToZero 2.2.1.161
An user action to reset all the resource management counters to zero
OBJECT-TYPE    
  Integer32  

usrResetResourceMgmtCountersResetTime 2.2.1.162
Time the resource management counters were last reset to value zero.
OBJECT-TYPE    
  DateAndTime  

usrRadiusAccountingAttributeStyle 2.2.1.160
Takes STANDARD or Netserver style for accounting attribute values. For wireless the default is standard or THREEG_ACCT_ATTR_FORMAT.
OBJECT-TYPE    
  INTEGER standard(1), netserver(3)  

usrRadiusSendAcctUnauthRecord 2.2.1.165
Whether the Sending unauthenticated STOP records is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManRadiusAcctPrimaryServerGroupCounterResetTime 2.2.1.163
Daily time we reset all the accounting counters for primary group to value zero
OBJECT-TYPE    
  DateAndTime  

usrUserManRadiusAcctSecondaryServerGroupCounterResetTime 2.2.1.164
Daily time we reset all the accounting counters for secondary group to value zero
OBJECT-TYPE    
  DateAndTime  

usrUserManRadiusDefaultUserAcct 2.2.1.166
Whether to send accounting records for default users. This object is not used in wireless applications.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManTunnelAuthenName 2.2.1.167
This option is used for l2tp tunnel authentication. Default/Disabled - System Transmit Authentication Name Enabled - Used domain name or tunnel name.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrPrimaryAuthContactInterval 2.2.1.168
Number of seconds since the Primary Radius authentication server was last contacted.
OBJECT-TYPE    
  Integer32  

usrSecondaryAuthContactInterval 2.2.1.169
Number of seconds since the Secondary Radius authentication server was last contacted.
OBJECT-TYPE    
  Integer32  

usrTertiaryAuthContactInterval 2.2.1.170
Number of seconds since the Tertiary Radius authentication server was last contacted.
OBJECT-TYPE    
  Integer32  

usrAcctGrp1PriContactInterval 2.2.1.171
Number of seconds since the Group 1 Primary Accounting server was last contacted.
OBJECT-TYPE    
  Integer32  

usrAcctGrp1FrstBkpContactInterval 2.2.1.172
Number of seconds since the Group 1 First backup accounting server was last contacted.
OBJECT-TYPE    
  Integer32  

usrAcctGrp1SecBkpContactInterval 2.2.1.173
Number of seconds since the Group 1 Second Backup Accounting server was last contacted.
OBJECT-TYPE    
  Integer32  

usrAcctGrp2PriContactInterval 2.2.1.174
Number of seconds since the Group 2 Primary Accounting server was last contacted.
OBJECT-TYPE    
  Integer32  

usrAcctGrp2FrstBkpContactInterval 2.2.1.175
Number of seconds since the Group 2 First backup accounting server was last contacted.
OBJECT-TYPE    
  Integer32  

usrAcctGrp2SecBkpContactInterval 2.2.1.176
Number of seconds since the Group 2 Second backup accounting server was last contacted.
OBJECT-TYPE    
  Integer32  

usrUserManSyslogFormat 2.2.1.177
Syslog message Format. Specifies which syslog style format is in effect out of the possible range of selections.
OBJECT-TYPE    
  Integer32  


usrRadiusAccountingPrioritiseFirstServer 2.2.1.179
This switch is to enable/disable prioritisation of the first server in each server group
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManOnlySTOPforFailedService 2.2.1.180
After successful authentication, if the required service start for the user fails, just send acct STOP
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

usrRadiusSendAcctAuthServiceType 2.2.1.181
Whether the Sending of service type in auth-request enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrRadiusAuthStatusPollInitInterval 2.2.1.182
The Initial Interval for Auth Status Polling
OBJECT-TYPE    
  Integer32  

usrRadiusAuthStatusPollMaxInterval 2.2.1.183
The Maximum Interval for Auth Status Polling
OBJECT-TYPE    
  Integer32  

usrRadiusAuthStatusPollIncInterval 2.2.1.184
The interval increment for Auth Status Polling
OBJECT-TYPE    
  Integer32  

usrRadiusAuthStatusServerUpRetry 2.2.1.185
The number of status server tries before making the server from down to up
OBJECT-TYPE    
  Integer32  

usrRadiusAuthStatusServerDownRetry 2.2.1.186
The number of status server retries before making the server from up to down
OBJECT-TYPE    
  Integer32  

usrRadiusAuthStatusPrimServer 2.2.1.187
The status of the primary server
OBJECT-TYPE    
  Integer32  

usrRadiusAuthStatusSecServer 2.2.1.188
The status of the secondary server
OBJECT-TYPE    
  Integer32  

usrRadiusAuthStatusTerServer 2.2.1.189
The status of the tertiary server
OBJECT-TYPE    
  Integer32  

usrRadiusDNISAuthServiceType 2.2.1.190
The service type set fot DNIS authenticaton request. Default is 10
OBJECT-TYPE    
  Integer32  

usrRadiusVTPAccountingFlag 2.2.1.194
Flag which decides whether to send acct records for VTP tunnel users or not
OBJECT-TYPE    
  Integer32  

uumAAAGlobalOpStatusRenewIntvl 2.2.1.199
Time to reenable operationally down servers
OBJECT-TYPE    
  Integer32 1..65536  

uumAAAGlobalTotalRetransmit 2.2.1.200
Total Retransmit, same as RadiusOthers.radius_retrans
OBJECT-TYPE    
  Integer32 0..60  

usrPortIdStyle 2.2.1.201
Port Id generation style. The value of 1 means that the port id will be given from a contiguous space. The value 2 means the lowest port id will be computed based on the density of ports.
OBJECT-TYPE    
  INTEGER contiguous(1), density-based(2)  

usrResourceReclaimStyle 2.2.1.202
Whether resource reclaim is done in MCI style or the IETF draft style Default is DRAFT style
OBJECT-TYPE    
  INTEGER draft-style(1), mci-style(2)  

usrAuthSyslogState 2.2.1.203
This value states whether the Authentication information is sent in the syslogs.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrAcctSyslogState 2.2.1.204
This value states whether the Accounting information is sent in the syslogs.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrAuthSyslogReset 2.2.1.205
This value states whether or not the authentication counters will be reset at a configured interval.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrAcctSyslogReset 2.2.1.206
This value states whether or not the accounting counters will be reset at a configured interval.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrAuthSyslogFrequency 2.2.1.207
This object specifies the time interval after which the authentication counters will be reset to zero.
OBJECT-TYPE    
  INTEGER one-hour(0), six-hours(1), twelve-hours(2), twentyfour-hours(3), five-days(4)  

usrAcctSyslogFrequency 2.2.1.208
This object specifies the time interval after which the accounting counters will be reset to zero.
OBJECT-TYPE    
  INTEGER one-hour(0), six-hours(1), twelve-hours(2), twentyfour-hours(3), five-days(4)  

usrUserManRadiusPrimaryPref 2.2.1.209
Primary Auth Server preference value when using PREFERED algorithm
OBJECT-TYPE    
  Integer32 1..3  

usrUserManRadiusSecondaryPref 2.2.1.210
Secondary Auth Server preference value when using PREFERED algorithm
OBJECT-TYPE    
  Integer32 1..3  

usrUserManRadiusTertiaryPref 2.2.1.211
Tertiary Auth Server preference value when using PREFERED algorithm
OBJECT-TYPE    
  Integer32 1..3  

usrUserManPerServerRetryCount 2.2.1.212
Per Server Retry Count when using PREFERED algorithm
OBJECT-TYPE    
  Integer32 1..30  

usrUserManPerAcctServerRetryCount 2.2.1.213
Per Server Retry Count for Acct Servers
OBJECT-TYPE    
  Integer32 0..30  

usrUserManRadiusAcctCDRState 2.2.1.214
Indicates whether to send Call Detail Record in ACCT Stop req.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManRadiusAcctAggregateRoundRobinCount 2.2.1.215
The total number of times the servers are switched in the primary and secondary server group
OBJECT-TYPE    
  Integer32 0..2147483647  

usrUserManRadiusAcctAggregatePacketDiscardCount 2.2.1.216
The total number of packets discarded in the primary and secondary server group
OBJECT-TYPE    
  Integer32 0..2147483647  

usrUserManRadiusAcctAverageQueuePercentFull 2.2.1.217
The average of percentage of the queue filled in the primary and secondary server group
OBJECT-TYPE    
  Integer32 0..100  

usrUserManRadiusAcctAggregateOutstandingPacketCount 2.2.1.218
The total number of packets outstanding in the primary and secondary server group
OBJECT-TYPE    
  Integer32 0..2147483647  

uumPrioratizeAuthServer 2.2.1.219
In Round Robin Feature, Try the first auth server initially
OBJECT-TYPE    
  Integer32  

usrResourceFreeForTunnelInitiator 2.2.1.220
For a tunneled call(l2tp/pptp) user get authenticated at both call initiator and call terminator thus uses 2 resources. If enabled resources at the initiator is freed immediatly after authentication else only when user goes away.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrRebootIndicationStyle 2.2.1.222
Whether reboot indiaction is sent in fall-through fashion or in round-robin manner according to server preference. Default is fall-through style
OBJECT-TYPE    
  INTEGER fall-through(1), preferred-server(2)  

usrUserManRadiusAcctPrimaryPref 2.2.1.223
Primary Acct Server preference value
OBJECT-TYPE    
  Integer32 1..3  

usrUserManRadiusAcctSecondaryPref 2.2.1.224
Secondary Acct Server preference value
OBJECT-TYPE    
  Integer32 1..3  

usrUserManRadiusAcctBackupPrimaryFirstPref 2.2.1.225
Acct Server preference value
OBJECT-TYPE    
  Integer32 1..3  

usrUserManRadiusAcctBackupPrimarySecondPref 2.2.1.226
Acct Server preference value
OBJECT-TYPE    
  Integer32 1..3  

usrUserManRadiusAcctBackupSecondaryFirstPref 2.2.1.227
Acct Server preference value
OBJECT-TYPE    
  Integer32 1..3  

usrUserManRadiusAcctBackupSecondarySecondPref 2.2.1.228
Acct Server preference value
OBJECT-TYPE    
  Integer32 1..3  

usrUserManNAIConfigTable 2.2.1.232
A table for configuring NAI construction in case there is no authentication.
OBJECT-TYPE    
  SEQUENCE OF  
    UumNAIConfigEntry

uumNAIConfigEntry 2.2.1.232.1
An entry in the NAI construction table.
OBJECT-TYPE    
  UumNAIConfigEntry  

uumNAIIndex 2.2.1.232.1.1
The index of the NAI construction table, it can support up 100 entries.
OBJECT-TYPE    
  Integer32 1..100  

uumNAIMSIDType 2.2.1.232.1.2
The type of the MSID
OBJECT-TYPE    
  INTEGER imsi(1), min(2), irm(3)  

uumNAIMSIDRangeMin 2.2.1.232.1.3
The lower bound of the MSID range. This value is replaced by its string counterpart below
OBJECT-TYPE    
  Integer32  

uumNAIMSIDRangeMax 2.2.1.232.1.4
The upper bound of the MSID range. This value is replaced by its string counterpart below
OBJECT-TYPE    
  Integer32  

uumNAIRealm 2.2.1.232.1.5
The realm of the MSID in the range specified
OBJECT-TYPE    
  DisplayString  

uumNAIStatus 2.2.1.232.1.6
This object is used to add, modify, and delete rows for the NAI construction table.
OBJECT-TYPE    
  RowStatus  

uumNAIMSIDStrRangeMin 2.2.1.232.1.7
The MSI range requires 15 digits which cannot be accomodated within an INTEGER. Hence the older object is replaced with this string object
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

uumNAIMSIDStrRangeMax 2.2.1.232.1.8
The MSI range requires 15 digits which cannot be accomodated within an INTEGER. Hence the older object is replaced with this string object
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

uumNAIAuthType 2.2.1.232.1.9
Action taken when a NAI of this type is constructed: reject - drop the call using NAI in accounting record accept - accept the call without consulting AAA using PDSNDefault user session parameters auth - consult AAA using constructed NAI as user name. use AAA reply for session parameters if AAA accepts use AAA reject to drop the call
OBJECT-TYPE    
  INTEGER reject(1), accept(2), auth(3)  

usrUserManTODConfigTable 2.2.1.233
A table for configuring Time Of Day Timer.
OBJECT-TYPE    
  SEQUENCE OF  
    UumTODConfigEntry

uumTODConfigEntry 2.2.1.233.1
An entry in the TOD table.
OBJECT-TYPE    
  UumTODConfigEntry  

uumTODIndex 2.2.1.233.1.1
The index of the TOD table, it can support up 5 entries.
OBJECT-TYPE    
  Integer32 1..5  

uumTODHour 2.2.1.233.1.2
The hour of the TOD timer, it is a 24 hour clock.
OBJECT-TYPE    
  Integer32 0..23  

uumTODMinute 2.2.1.233.1.3
The minute of the TOD timer.
OBJECT-TYPE    
  Integer32 0..59  

uumTODSecond 2.2.1.233.1.4
The second of the TOD timer.
OBJECT-TYPE    
  Integer32 0..59  

uumTODStatus 2.2.1.233.1.5
This object is used to add and delete rows from the TOD table.
OBJECT-TYPE    
  RowStatus  

usrUserManTODTimerEnabled 2.2.1.235
Whether TOD timer accounting is enabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManActiveStopTriggerEnabled 2.2.1.236
Whether Active Stop Airlink Record triggered accounting is enabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAuthFailTrapsState 2.2.1.231
Whether the User Authentication Failure Trap is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserMan3GAcctAttrFormat 2.2.1.244
This flags determines whether PDSN will send accounting attributes in 3G format, 3Com VSA format, 3G and legacy Radius format
OBJECT-TYPE    
  INTEGER threeGFormat(1), threeComVSAFormat(2), rfc2866Format(3)  

usrUserManHarpDownDetectionTimer 2.2.1.248
The longest time without responses from HARP/AAA in which HARP/AAA need to be marked Out of Service
OBJECT-TYPE    
  Integer32 1..65535  

usrUserManHarpUpDetectionScheme 2.2.1.249
Flag to indicate whether the HARP/AAA needs to be marked 'Up' based purely on the up timer or based upon either a timer or response from HARP/AAA
OBJECT-TYPE    
  INTEGER timerbased(1), responsebased(2)  

usrUserManAdminAcct 2.2.1.255
Is accounting for admin users on or off
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrCorrelationIdFromFacn 2.2.1.256
This value states whether or not use correlation id received from facn, when facn interface is enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumAAAGlobalDomainSelectionMask 2.2.1.258
Domain selection mask
OBJECT-TYPE    
  INTEGER left(1), right(2), all(3)  

usrUserManHarpDownDetectionScheme 2.2.1.259
Flag to indicate whether the HARP/AAA needs to be marked 'Down' based on tbe count of no-responses to the HARP/AAA or based on the HARP/AAA down detection timer.
OBJECT-TYPE    
  INTEGER counterbased(1), timerbased(2)  

usrUserManAAADownTrapsState 2.2.1.260
Whether the HARP/AAA Down Trap is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAAAUpTrapsState 2.2.1.261
Whether the HARP/AAA Up Trap is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManDomainSelection 2.2.1.270
Domain selection from NAI: enabled or disabled
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManTrapsV2 2.2.2.0
Events for the userman process
OBJECT-IDENTITY    

usrUserManAuthFailure 2.2.2.0.1
This trap is generated when authentication fails for a user.
NOTIFICATION-TYPE    

usrUserManRadiusBusyoutTrap 2.2.2.0.2
This trap is generated when none of the authentication or accounting servers can be contacted from the NAS and we mark the ports busy. Not Applicable to wireless components.
NOTIFICATION-TYPE    

usrUserManHarpDownTrap 2.2.2.0.3
This trap is generated when a HARP does not respond within usrUserManHarpDownDetectionTimer defined seconds and when HARP down detection is present and server is marked UM_DOWN. It sends the IP address of the failing HARP server. This event is only generated under these conditins if HarpDownDetection feature is enabled.
NOTIFICATION-TYPE    

usrUserManAAAAuthFailure 2.2.2.0.4
This is an Auth Fail trap for the new AAA implementation
NOTIFICATION-TYPE    

usrUserManAAAUpTrap 2.2.2.0.5
This trap is generated when the HARP/AAA is marked operational from down state. Two trigger schemes are detected for this trap. 1. If the HarpDownDetection feature is enabled, the trap is generated either after a configured amount of time (OP. Renewal status interval) or is generated on receiving a response from the HARP server which is marked down. 2. If the HarpDownDetection feature is disabled, the trap is generated after a configured amount of time (OP. Renewal status interval)
NOTIFICATION-TYPE