USR-PPTP-MIB

Imported modules

Imported symbols

Counter32	Integer32	IpAddress
OBJECT-IDENTITY	OBJECT-TYPE	MODULE-IDENTITY
RowStatus	TruthValue	TEXTUAL-CONVENTION
DisplayString	common	UsrConfigStatus
DisplayString

Defined Types

MilliSeconds
A period of time measured in units of .001 of seconds when used in conjunction with the DISPLAY-HINT will show seconds and fractions of second with a resolution of .001 of a second.
TEXTUAL-CONVENTION
	INTEGER	0..2147483646

UsrPPTPConfigEntry
SEQUENCE
	usrPptpConfigIndex	Integer32
	usrPptpMaxNumberOfSessions	Integer32
	usrPptpMaxNumberOfTunnels	Integer32
	usrPptpControlTunnelSeekDescriptors	Integer32
	usrPptpUseDataTunnelFlowControl	TruthValue
	usrPptpDataTunnelDelayedAckTimeout	MilliSeconds
	usrPptpDataTunnelReassemblyTimeout	MilliSeconds
	usrPptpDataChannelRecvPacketWindow	Integer32
	usrPptpHelloInactivityHoldTime	Integer32
	usrPptpEchoReplyTimeoutSeconds	Integer32
	usrPptpLoggingLevel	INTEGER
	usrPptpLoadBalancing	TruthValue
	usrPptpDialOut	DisplayString
	usrPptpPnsFlag	INTEGER

UsrPPTPStatsEntry
SEQUENCE
	usrPptpStatsIndex	Integer32
	usrPptpNumActiveTunnels	Integer32
	usrPptpStatsNumActiveSessions	Integer32
	usrPptpStatsMalformedPackets	Counter32
	usrPptpStatsControlTunnelRecvPackets	Counter32
	usrPptpStatsProcessedControlTunnelRecvPackets	Counter32
	usrPptpStatsControlTunnelSendPackets	Counter32
	usrPptpStatsDataTunnelRecvPackets	Counter32
	usrPptpStatsDataTunnelWithdataRecvPackets	Counter32
	usrPptpStatsDataTunnelWithoutdataRecvPackets	Counter32
	usrPptpStatsProcessedDataTunnelRecvPackets	Counter32
	usrPptpStatsInSequenceDataTunnelRecvPackets	Counter32
	usrPptpStatsOutSequenceDataTunnelRecvPackets	Counter32
	usrPptpStatsInOrderDataTunnelRecvPackets	Counter32
	usrPptpStatsOutOfOrderDataTunnelRecvPackets	Counter32
	usrPptpStatsFlowDiscardedDataTunnelRecvPackets	Counter32
	usrPptpStatsOutOfOrderDiscardedDataTunnelRecvPackets	Counter32
	usrPptpStatsDataTunnelSendPackets	Counter32
	usrPptpStatsDataTunnelWithdataSendPackets	Counter32
	usrPptpStatsDataTunnelWithoutdataSendPackets	Counter32
	usrPptpStatsDataTunnelFlowControlTimeouts	Counter32
	usrPptpStatsLocalDataTunnelFlowControlEnables	Counter32
	usrPptpStatsRemoteDataTunnelFlowControlEnables	Counter32
	usrPptpStatsDataTunnelReassemblyTimeouts	Counter32

UsrPptpHostEntry
SEQUENCE
	usrPptpHostIndex	Integer32
	usrPptpHostAddress	IpAddress
	usrPptpHostStatus	RowStatus

UsrPptpTunnelQueryEntry
SEQUENCE
	usrPptpTunnelLogicalStackIndex	Integer32
	usrPptpTunnelLocalControlTunnelId	Integer32
	usrPptpTunnelControlTunnelState	INTEGER
	usrPptpTunnelLocalInitConnection	TruthValue
	usrPptpTunnelIpAddress	IpAddress
	usrPptpTunnelControlTunnelRecvPkts	Counter32
	usrPptpTunnelProcessedControlTunnelRecvPkts	Counter32
	usrPptpTunnelCtlTunnelSndPkts	Counter32
	usrPptpTunnelRemoteHostName	DisplayString
	usrPptpTunnelDisconnect	Integer32
	usrPptpTunnelNumActiveSessions	Integer32
	usrPptpTunnelStartTime	Integer32
	usrPptpTunnelDomainName	OCTET STRING

UsrPptpSessionEntry
SEQUENCE
	usrPptpSessionLogicalStackIndex	Integer32
	usrPptpSessionTunnelID	Integer32
	usrPptpSessionLocalCallID	Integer32
	usrPptpSessionRemoteCallID	Integer32
	usrPptpSessionPeerName	DisplayString
	usrPptpSessionDuration	MilliSeconds
	usrPptpSessionLineState	INTEGER
	usrPptpSessionCallDeviceNumber	Integer32
	usrPptpSessionCallSerialNumber	DisplayString
	usrPptpSessionConnectBps	Integer32
	usrPptpSessionCallBearerType	INTEGER
	usrPptpSessionFramingType	INTEGER
	usrPptpSessionLocalRecvPacketWindow	Integer32
	usrPptpSessionRemoteRecvPacketWindow	Integer32
	usrPptpSessionDataTunnelRecvPackets	Counter32
	usrPptpSessionDataTunnelWithDataRecvPackets	Counter32
	usrPptpSessionDataTunnelWithoutDataRecvPackets	Counter32
	usrPptpSessionProcessedDataTunnelRecvPackets	Counter32
	usrPptpSessionInSequenceDataTunnelRecvPackets	Counter32
	usrPptpSessionOutSequenceDataTunnelRecvPackets	Counter32
	usrPptpSessionInOrderDatTunnelRecvPackets	Counter32
	usrPptpSessionOutOfOrderDataTunnelRecvPackets	Counter32
	usrPptpSessionFlowDiscardedDataTunnelRecvPackets	Counter32
	usrPptpSessionOutOfOrderDiscardedDataTunnelRecvPackets	Counter32
	usrPptpSessionDataTunnelSendPackets	Counter32
	usrPptpSessionDataTunnelWithDataSendPackets	Counter32
	usrPptpSessionDataTunnelWithoutDataSendPackets	Counter32
	usrPptpSessionDataTunnelFlowControlTimeouts	Counter32
	usrPptpSessionLocalDataTunnelFlowControlOn	TruthValue
	usrPptpSessionLocalDataTunnelFlowControlEnables	Counter32
	usrPptpSessionRemoteDataTunnelFlowwControlOn	TruthValue
	usrPptpSessionRemoteDataTunnelFlowControlEnables	Counter32
	usrPptpSessionDataTunnelReassemblyTimeouts	Counter32
	usrPptpSessionDisconnect	Integer32
	usrPptpSessionDomainName	OCTET STRING

Defined Values

usrPptp		1.3.6.1.4.1.429.4.56
The commWorks enterprise defined MIB objects for point-to-point tunneling.
MODULE-IDENTITY

usrPPTPGlobal		1.3.6.1.4.1.429.4.56.1
The root of the PPTP global Object-Identifiers.
Status: current	Access: read-write
OBJECT-IDENTITY

usrPPTPConfigTable		1.3.6.1.4.1.429.4.56.1.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsrPPTPConfigEntry

usrPptpConfigEntry		1.3.6.1.4.1.429.4.56.1.1.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsrPPTPConfigEntry

usrPptpConfigIndex		1.3.6.1.4.1.429.4.56.1.1.1.1
A unique value for each pptp protocol stack.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpMaxNumberOfSessions		1.3.6.1.4.1.429.4.56.1.1.1.2
Defines the number of simultaneous active sessions that the PPTP stack will support.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpMaxNumberOfTunnels		1.3.6.1.4.1.429.4.56.1.1.1.3
Defines the number of simultaneous active tunnels that the PPTP stack will support. Remember that sessions are multiplexed within a single tunnel, therefore this object contains the number of active PPTP tunnel sessions which are to be supported per tunnel.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpControlTunnelSeekDescriptors		1.3.6.1.4.1.429.4.56.1.1.1.4
Defines the number of tunnel terminators which the PPTP stack is to be able to simultaneous connect to. Once a tunnel is in the established state, the seek descriptor is no longer used.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpUseDataTunnelFlowControl		1.3.6.1.4.1.429.4.56.1.1.1.5
This object determines whether or not the PPTP stack is to use flow control on the data tunnel.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

usrPptpDataTunnelDelayedAckTimeout		1.3.6.1.4.1.429.4.56.1.1.1.6
This object defines the number of milliseconds which the PPTP stack will wait to send and ACK to it's peer in the case where there are no data or control packets to piggy- back the ACK to. The default value for this object is 0 which results in immediate acknowledgment when there are no data or control packets pending.
Status: current	Access: read-write
OBJECT-TYPE
	MilliSeconds

usrPptpDataTunnelReassemblyTimeout		1.3.6.1.4.1.429.4.56.1.1.1.7
This object defines the number of milliseconds that the PPTP stack will use to determine the window to use before reassembling out of order packets. A low value increases the chance of out-of-sequence packets to be lost (which MAY causes the PPP decompression engine to reset), a high value increases the time period where the PPTP stack processes packets which were received out of order (especially in the case of a packet which was lost within the network). The default value for this object is zero (0) which may result in all out of sequence packets being lost.
Status: current	Access: read-write
OBJECT-TYPE
	MilliSeconds

usrPptpDataChannelRecvPacketWindow		1.3.6.1.4.1.429.4.56.1.1.1.8
This object defines the Data Channel receive window size which is transmitted to the PPTP peers.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpHelloInactivityHoldTime		1.3.6.1.4.1.429.4.56.1.1.1.9
This object defines the length of the inactivity timer in seconds which causes the PPTP stack to transmit a keep-alive packet (known as Hello).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpEchoReplyTimeoutSeconds		1.3.6.1.4.1.429.4.56.1.1.1.10
This object defines the number of seconds which the PPTP stack must wait until a time-out occurs in receiving a response to the Hello message.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpLoggingLevel		1.3.6.1.4.1.429.4.56.1.1.1.11
This object defines the logging level which the PPTP protocol stack will use.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	logDisabled(1), logControlPackets(2), logControlAndDataPacketHeaders(3), logControlAndDataPackets(4)

usrPptpLoadBalancing		1.3.6.1.4.1.429.4.56.1.1.1.12
Defines If Load Balancing is enabled or not.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

usrPptpDialOut		1.3.6.1.4.1.429.4.56.1.1.1.13
This variable is set through the CLI when the user manually issues a PPTP dial-out.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

usrPptpPnsFlag		1.3.6.1.4.1.429.4.56.1.1.1.14
Setting this object to a value of enabled(1) will enable the PPTP pns enable feature. Setting this object to disabled(2) will disable the PPTP PNS feature.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

usrPPTPStatsTable		1.3.6.1.4.1.429.4.56.1.2
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsrPPTPStatsEntry

usrPptpStatsEntry		1.3.6.1.4.1.429.4.56.1.2.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsrPPTPStatsEntry

usrPptpStatsIndex		1.3.6.1.4.1.429.4.56.1.2.1.1
Should be the same value as pptpConfigIndex to reference the same logical pptp protocol stack.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpNumActiveTunnels		1.3.6.1.4.1.429.4.56.1.2.1.2
This object returns the number of PPTP tunnels that are currently active.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpStatsNumActiveSessions		1.3.6.1.4.1.429.4.56.1.2.1.3
This object returns the number of PPTP sessions that are currently active.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpStatsMalformedPackets		1.3.6.1.4.1.429.4.56.1.2.1.4
This object returns a count of the number of malformed packets received by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsControlTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.5
This object returns a count of the number of control packets received by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsProcessedControlTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.6
This object returns a count of the number of received control packets that were processed by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsControlTunnelSendPackets		1.3.6.1.4.1.429.4.56.1.2.1.7
This object returns a count of the number of control packets that were transmitted by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.8
This object returns a count of the number of data packets that were received by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelWithdataRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.9
This object returns a count of the number of data packets that were received with data by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelWithoutdataRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.10
This object returns a count of the number of Zero Length data packets that were received by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsProcessedDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.11
This object returns a count of the number of data packets that were received and processed by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsInSequenceDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.12
This object returns a count of the number of data packets that were received in sequence by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsOutSequenceDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.13
This object returns a count of the number of data packets that were received out of sequence by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsInOrderDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.14
This object returns a count of the number of data packets that were received in order by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsOutOfOrderDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.15
This object returns a count of the number of data packets that were received out of order by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsFlowDiscardedDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.16
This object returns a count of the number of data packets that were received and discarded due to flow control by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsOutOfOrderDiscardedDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.1.2.1.17
This object returns a count of the number of data packets that were received and discarded due to ordering by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelSendPackets		1.3.6.1.4.1.429.4.56.1.2.1.18
This object returns a count of the number of data packets that were transmitted on the data Tunnel by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelWithdataSendPackets		1.3.6.1.4.1.429.4.56.1.2.1.19
This object returns a count of the number of data packets that were transmitted with data by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelWithoutdataSendPackets		1.3.6.1.4.1.429.4.56.1.2.1.20
This object returns a count of the number of Zero length data packets that were transmitted by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelFlowControlTimeouts		1.3.6.1.4.1.429.4.56.1.2.1.21
This object returns a count of the number of data Tunnel flow control time-outs seen by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsLocalDataTunnelFlowControlEnables		1.3.6.1.4.1.429.4.56.1.2.1.22
This object returns a count of the number of local data Tunnel flow control enables seen by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsRemoteDataTunnelFlowControlEnables		1.3.6.1.4.1.429.4.56.1.2.1.23
This object returns a count of the number of remote data Tunnel flow control enables seen by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpStatsDataTunnelReassemblyTimeouts		1.3.6.1.4.1.429.4.56.1.2.1.24
This object returns a count of the number of data Tunnel re-assembly time-outs seen by this PPTP stack since it was last initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpHostTable		1.3.6.1.4.1.429.4.56.2
The table of PPTP Hosts.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsrPptpHostEntry

usrPptpHostEntry		1.3.6.1.4.1.429.4.56.2.1
A (conceptual) entry for one pptp Host.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsrPptpHostEntry

usrPptpHostIndex		1.3.6.1.4.1.429.4.56.2.1.1
The logical identifier of the Host Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

usrPptpHostAddress		1.3.6.1.4.1.429.4.56.2.1.2
The specified or resolved ip address of the named Host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

usrPptpHostStatus		1.3.6.1.4.1.429.4.56.2.1.3
The status of this row of the Host Table.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

usrPptpTunnel		1.3.6.1.4.1.429.4.56.3
OBJECT IDENTIFIER

usrPptpTunnelQueryTable		1.3.6.1.4.1.429.4.56.3.1
A table containing the READ ONLY propietary extension parameters for PPTP Tunnel MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsrPptpTunnelQueryEntry

usrPptpTunnelQueryEntry		1.3.6.1.4.1.429.4.56.3.1.1

Status: current	Access: not-accessible
OBJECT-TYPE
	UsrPptpTunnelQueryEntry

usrPptpTunnelLogicalStackIndex		1.3.6.1.4.1.429.4.56.3.1.1.1
This object contains a reference to the logical pptp protocol stack and must be the same as the usrNppptpConfigIndex.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpTunnelLocalControlTunnelId		1.3.6.1.4.1.429.4.56.3.1.1.2
This object contains the local tunnel Identifier.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpTunnelControlTunnelState		1.3.6.1.4.1.429.4.56.3.1.1.3
This field contains the current state of the control tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noState(1), tunnelAllocated(2), tunnelConnecting(3), tunnelStartingSession(4), tunnelEstablished(5), tunnelStoppingSession(6), tunnelDisconnecting(7), tunnelLost(8), idleTimeOut(9)

usrPptpTunnelLocalInitConnection		1.3.6.1.4.1.429.4.56.3.1.1.4
This object indicates whether the tunnel was generated locally or not. When this object returns a value of true(1) the tunnel was locally generated.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

usrPptpTunnelIpAddress		1.3.6.1.4.1.429.4.56.3.1.1.5
IP address of the remote peer.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

usrPptpTunnelControlTunnelRecvPkts		1.3.6.1.4.1.429.4.56.3.1.1.6
This object contains the number of control packets received on the control tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpTunnelProcessedControlTunnelRecvPkts		1.3.6.1.4.1.429.4.56.3.1.1.7
This object contains the number of received packets which were processed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpTunnelCtlTunnelSndPkts		1.3.6.1.4.1.429.4.56.3.1.1.8
This object contains the number of packets transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpTunnelRemoteHostName		1.3.6.1.4.1.429.4.56.3.1.1.9
This object contains the host name of the PPTP peer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

usrPptpTunnelDisconnect		1.3.6.1.4.1.429.4.56.3.1.1.10
This object is used to disconnect a specific tunnel. Setting this object to any integer value will disconnect the tunnel
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpTunnelNumActiveSessions		1.3.6.1.4.1.429.4.56.3.1.1.11
This object contains the number of sessions beloning to the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpTunnelStartTime		1.3.6.1.4.1.429.4.56.3.1.1.12
This object contains the time elapsed since the tunnel was set up.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpTunnelDomainName		1.3.6.1.4.1.429.4.56.3.1.1.13
This object contains the Domain Name of the L2TP peer.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

usrPptpSession		1.3.6.1.4.1.429.4.56.4
The root of PPTP Session Module Object-identifiers.
Status: current	Access: read-only
OBJECT-IDENTITY

usrPptpSessionTable		1.3.6.1.4.1.429.4.56.4.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsrPptpSessionEntry

usrPptpSessionEntry		1.3.6.1.4.1.429.4.56.4.1.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsrPptpSessionEntry

usrPptpSessionLogicalStackIndex		1.3.6.1.4.1.429.4.56.4.1.1.1
This object contains a reference to the logical pptp protocol stack and must be the same as the pptpConfigIndex and pptpTunelLogicalStackIndex.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionTunnelID		1.3.6.1.4.1.429.4.56.4.1.1.2
This object contains the control Channel Tunnel identifier for this session
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionLocalCallID		1.3.6.1.4.1.429.4.56.4.1.1.3
This object contains the local call identifier for the session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionRemoteCallID		1.3.6.1.4.1.429.4.56.4.1.1.4
This object contains the remote call identifier for the session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionPeerName		1.3.6.1.4.1.429.4.56.4.1.1.5
identifies the peer session name on this interface. This is typically the login name of the remote user
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

usrPptpSessionDuration		1.3.6.1.4.1.429.4.56.4.1.1.6
Number of milliseconds the session has been up on this interface
Status: current	Access: read-only
OBJECT-TYPE
	MilliSeconds

usrPptpSessionLineState		1.3.6.1.4.1.429.4.56.4.1.1.7
This object contains the current state of the control Tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noState(1), allocated(2), waitingControlTunnel(3), calling(4), offering(5), answering(6), connected(7), disconnectingLocal(8), disconnectingRemote(9), lostControlTunnel(10)

usrPptpSessionCallDeviceNumber		1.3.6.1.4.1.429.4.56.4.1.1.8
NO DESCRIPTION PROVIDED
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionCallSerialNumber		1.3.6.1.4.1.429.4.56.4.1.1.9
This object contains the serial number that applies to the session.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

usrPptpSessionConnectBps		1.3.6.1.4.1.429.4.56.4.1.1.10
This object returns the baud rate which this session was established at.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionCallBearerType		1.3.6.1.4.1.429.4.56.4.1.1.11
This object returns the bearer type that applies to this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	digital(2), analog(1)

usrPptpSessionFramingType		1.3.6.1.4.1.429.4.56.4.1.1.12
This object returns the framing type used for this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	asynchronous(1), synchronous(2)

usrPptpSessionLocalRecvPacketWindow		1.3.6.1.4.1.429.4.56.4.1.1.13
This object returns the local send window size for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionRemoteRecvPacketWindow		1.3.6.1.4.1.429.4.56.4.1.1.14
This object returns the remote send window size for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

usrPptpSessionDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.15
This object returns the total number of packets received on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDataTunnelWithDataRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.16
This object returns the total number of packets received on the data Tunnel for this session which contained data.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDataTunnelWithoutDataRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.17
This object returns the total number of Zero Length packets received on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionProcessedDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.18
This object returns the total number of packets received on the data Tunnel for this session which were processed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionInSequenceDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.19
This object returns the total number of packets received on the data Tunnel for this session which were received in sequence.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionOutSequenceDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.20
This object returns the total number of packets received on the data Tunnel for this session which were received out of sequence.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionInOrderDatTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.21
This object returns the total number of packets received on the data Tunnel for this session which were received in order.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionOutOfOrderDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.22
This object returns the total number of packets received on the data Tunnel for this session which were received out of order.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionFlowDiscardedDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.23
This object returns the total number of packets received on the data Tunnel for this session which were discarded due to flow control.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionOutOfOrderDiscardedDataTunnelRecvPackets		1.3.6.1.4.1.429.4.56.4.1.1.24
This object returns the total number of packets received on the data Tunnel for this session which were discarded due to ordering.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDataTunnelSendPackets		1.3.6.1.4.1.429.4.56.4.1.1.25
This object returns the total number of packets transmitted on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDataTunnelWithDataSendPackets		1.3.6.1.4.1.429.4.56.4.1.1.26
This object returns the total number of packets transmitted on the data Tunnel for this session which contained data.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDataTunnelWithoutDataSendPackets		1.3.6.1.4.1.429.4.56.4.1.1.27
This object returns the total number of Zero Length packets transmitted on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDataTunnelFlowControlTimeouts		1.3.6.1.4.1.429.4.56.4.1.1.28
This object returns the total number of flow control time-outs seen on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionLocalDataTunnelFlowControlOn		1.3.6.1.4.1.429.4.56.4.1.1.29
This object returns the current local flow control state for the data Tunnel of this session.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

usrPptpSessionLocalDataTunnelFlowControlEnables		1.3.6.1.4.1.429.4.56.4.1.1.30
This object returns the total number of local flow control enables seen on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionRemoteDataTunnelFlowwControlOn		1.3.6.1.4.1.429.4.56.4.1.1.31
This object returns the current remote flow control state for the data Tunnel of this session.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

usrPptpSessionRemoteDataTunnelFlowControlEnables		1.3.6.1.4.1.429.4.56.4.1.1.32
This object returns the number of remote flow control enables seen on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDataTunnelReassemblyTimeouts		1.3.6.1.4.1.429.4.56.4.1.1.33
This object returns the nubmer of re-assembly time-outs seen on the data Tunnel for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

usrPptpSessionDisconnect		1.3.6.1.4.1.429.4.56.4.1.1.34
This object is used to disconnect a specific tunnel. Setting this object to any integer value will disconnect the session
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usrPptpSessionDomainName		1.3.6.1.4.1.429.4.56.4.1.1.35
This object contains the Domain Name of the L2TP peer.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

usrPPTPConfigFileName		1.3.6.1.4.1.429.4.56.5
The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the PPTP process uses the default name `@file://PptpProcess.cfg'.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

usrPPTPCFMStatusFlag		1.3.6.1.4.1.429.4.56.6
CFM Config Flag
Status: current	Access: read-write
OBJECT-TYPE
	UsrConfigStatus