TRILL-OAM-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
IEEE8021-CFM-MIB	LLDP-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Counter32
Unsigned32	Integer32	mib-2
NOTIFICATION-TYPE	RowStatus	TruthValue
TimeStamp	MacAddress	OBJECT-GROUP
NOTIFICATION-GROUP	MODULE-COMPLIANCE	dot1agCfmMdIndex
dot1agCfmMaIndex	dot1agCfmMepIdentifier	dot1agCfmMepEntry
dot1agCfmMepDbEntry	Dot1agCfmIngressActionFieldValue	Dot1agCfmEgressActionFieldValue
Dot1agCfmRemoteMepState	LldpChassisId	LldpChassisIdSubtype
LldpPortId	LldpPortIdSubtype

Defined Types

TrillOamMepEntry
SEQUENCE
	trillOamMepRName	Unsigned32
	trillOamMepNextPtmTId	Counter32
	trillOamMepNextMtvmTId	Counter32
	trillOamMepPtrIn	Counter32
	trillOamMepPtrInOutofOrder	Counter32
	trillOamMepPtrOut	Counter32
	trillOamMepMtvrIn	Counter32
	trillOamMepMtvrInOutofOrder	Counter32
	trillOamMepMtvrOut	Counter32
	trillOamMepTxLbmDestRName	Unsigned32
	trillOamMepTxLbmHC	Unsigned32
	trillOamMepTxLbmReplyModeOob	TruthValue
	trillOamMepTransmitLbmReplyIp	OCTET STRING
	trillOamMepTxLbmFlowEntropy	OCTET STRING
	trillOamMepTxPtmDestRName	Unsigned32
	trillOamMepTxPtmHC	Unsigned32
	trillOamMepTxPtmReplyModeOob	TruthValue
	trillOamMepTransmitPtmReplyIp	OCTET STRING
	trillOamMepTxPtmFlowEntropy	OCTET STRING
	trillOamMepTxPtmStatus	TruthValue
	trillOamMepTxPtmResultOK	TruthValue
	trillOamMepTxPtmSeqNumber	Unsigned32
	trillOamMepTxPtmMessages	Integer32
	trillOamMepTxMtvmTree	Unsigned32
	trillOamMepTxMtvmHC	Unsigned32
	trillOamMepTxMtvmReplyModeOob	TruthValue
	trillOamMepTransmitMtvmReplyIp	OCTET STRING
	trillOamMepTxMtvmFlowEntropy	OCTET STRING
	trillOamMepTxMtvmStatus	TruthValue
	trillOamMepTxMtvmResultOK	TruthValue
	trillOamMepTxMtvmMessages	Integer32
	trillOamMepTxMtvmSeqNumber	Unsigned32
	trillOamMepTxMtvmScopeList	OCTET STRING
	trillOamMepDiscontinuityTime	TimeStamp

TrillOamMepFlowCfgEntry
SEQUENCE
	trillOamMepFlowCfgIndex	Unsigned32
	trillOamMepFlowCfgFlowEntropy	OCTET STRING
	trillOamMepFlowCfgDestRName	Unsigned32
	trillOamMepFlowCfgFlowHC	Unsigned32
	trillOamMepFlowCfgRowStatus	RowStatus

TrillOamPtrEntry
SEQUENCE
	trillOamMepPtrTransactionId	Unsigned32
	trillOamMepPtrHC	Unsigned32
	trillOamMepPtrFlag	Unsigned32
	trillOamMepPtrErrorCode	Unsigned32
	trillOamMepPtrTerminalMep	TruthValue
	trillOamMepPtrLastEgressId	Unsigned32
	trillOamMepPtrIngress	Dot1agCfmIngressActionFieldValue
	trillOamMepPtrIngressMac	MacAddress
	trillOamMepPtrIngressPortIdSubtype	LldpPortIdSubtype
	trillOamMepPtrIngressPortId	LldpPortId
	trillOamMepPtrEgress	Dot1agCfmEgressActionFieldValue
	trillOamMepPtrEgressMac	MacAddress
	trillOamMepPtrEgressPortIdSubtype	LldpPortIdSubtype
	trillOamMepPtrEgressPortId	LldpPortId
	trillOamMepPtrChassisIdSubtype	LldpChassisIdSubtype
	trillOamMepPtrChassisId	LldpChassisId
	trillOamMepPtrOrganizationSpecificTlv	OCTET STRING
	trillOamMepPtrNextHopNicknames	OCTET STRING

TrillOamMtvrEntry
SEQUENCE
	trillOamMepMtvrTransactionId	Unsigned32
	trillOamMepMtvrReceiveOrder	Unsigned32
	trillOamMepMtvrFlag	Unsigned32
	trillOamMepMtvrErrorCode	Unsigned32
	trillOamMepMtvrLastEgressId	Unsigned32
	trillOamMepMtvrIngress	Dot1agCfmIngressActionFieldValue
	trillOamMepMtvrIngressMac	MacAddress
	trillOamMepMtvrIngressPortIdSubtype	LldpPortIdSubtype
	trillOamMepMtvrIngressPortId	LldpPortId
	trillOamMepMtvrEgress	Dot1agCfmEgressActionFieldValue
	trillOamMepMtvrEgressMac	MacAddress
	trillOamMepMtvrEgressPortIdSubtype	LldpPortIdSubtype
	trillOamMepMtvrEgressPortId	LldpPortId
	trillOamMepMtvrChassisIdSubtype	LldpChassisIdSubtype
	trillOamMepMtvrChassisId	LldpChassisId
	trillOamMepMtvrOrganizationSpecificTlv	OCTET STRING
	trillOamMepMtvrNextHopNicknames	OCTET STRING
	trillOamMepMtvrReceiverAvailability	TruthValue
	trillOamMepMtvrReceiverCount	TruthValue

TrillOamMepDbEntry
SEQUENCE
	trillOamMepDbFlowIndex	Unsigned32
	trillOamMepDbFlowEntropy	OCTET STRING
	trillOamMepDbFlowState	Dot1agCfmRemoteMepState
	trillOamMepDbFlowFailedOkTime	TimeStamp
	trillOamMepDbRBridgeName	Unsigned32
	trillOamMepDbLastGoodSeqNum	Counter32

Defined Values

trillOamMib		1.3.6.1.2.1.238
This MIB module contains the management objects for the management of TRILL Services Operations, Administration and Maintenance. Initial version. Published as RFC 7784. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). ------------------------------------------------------------- Abbreviations Used Term Definition CFM Connectivity Fault Management IEEE Institute of Electrical and Electronics Engineers IETF Internet Engineering Task Force ITU-T International Telecommunication Union - Telecommunication Standardization Bureau FCOI The Final, Cross-Connect Error, Out-of-band, and In-band flags from the TRILL OAM Application Identifier TLV. LBM Loopback Message MA Maintenance Association (equivalent to a MEG) MAC Media Access Control MD Maintenance Domain (equivalent to an OAM Domain in Metro Ethernet Forum (MEF) 17) MEG Maintenance Entity Group (equivalent to a MA) MEG Level Maintenance Entity Group Level (equivalent to MD Level) MEP Maintenance Association End Point MIB Management Information Base MIP Maintenance Domain Intermediate Point MTVM Multi-destination Tree Verification Message MTVR Multi-destination Tree Verification Reply OAM Operations, Administration, and Maintenance On-Demand OAM actions that are initiated via manual intervention for a limited time to carry out diagnostics. On-demand OAM can result in singular or periodic OAM actions during the diagnostic time interval. PTM Path Trace Message PTR Path Trace Reply RFC Request for Comments SNMP Simple Network Management Protocol TLV Type-Length-Value, a method of encoding Objects TRILL Transparent Interconnection of Lots of Links VLAN Virtual LAN
MODULE-IDENTITY

trillOamNotifications		1.3.6.1.2.1.238.0
OBJECT IDENTIFIER

trillOamMibObjects		1.3.6.1.2.1.238.1
OBJECT IDENTIFIER

trillOamMibConformance		1.3.6.1.2.1.238.2
OBJECT IDENTIFIER

trillOamMep		1.3.6.1.2.1.238.1.1
OBJECT IDENTIFIER

trillOamMepTable		1.3.6.1.2.1.238.1.1.1
This table is an extension of the dot1agCfmMepTable and rows are automatically added or deleted from this table based upon row creation and destruction of the dot1agCfmMepTable. This table represents the local MEP TRILL OAM configuration table. The primary purpose of this table is provide local parameters for the TRILL OAM function found in RFC 7455 and instantiated at a MEP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrillOamMepEntry

trillOamMepEntry		1.3.6.1.2.1.238.1.1.1.1
The conceptual row of trillOamMepTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TrillOamMepEntry

trillOamMepRName		1.3.6.1.2.1.238.1.1.1.1.1
This object contains the RBridge Nickname field of the TRILL RBridge as defined in RFC 6325, Section 3.7.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65471

trillOamMepNextPtmTId		1.3.6.1.2.1.238.1.1.1.1.2
Next Sequence Number / Transaction Identifier to be sent in a Multi-destination message. This Sequence Number can be zero because it wraps around. Implementation of this identifier should be should provide a unique code value in order to identify the Transaction Identifier for a MEP with multiple flows.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepNextMtvmTId		1.3.6.1.2.1.238.1.1.1.1.3
Next Sequence Number / Transaction Identifier to be sent in a Multi-destination message. This Sequence Number can be zero because it wraps around. An implementation should be unique to identify Transaction Identifier for a MEP with multiple flows.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepPtrIn		1.3.6.1.2.1.238.1.1.1.1.4
Total number of valid, in-order Path Trace Replies received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepPtrInOutofOrder		1.3.6.1.2.1.238.1.1.1.1.5
Total number of valid, out-of-order Path Trace Replies received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepPtrOut		1.3.6.1.2.1.238.1.1.1.1.6
Total number of valid, Path Trace Replies transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepMtvrIn		1.3.6.1.2.1.238.1.1.1.1.7
Total number of valid, in-order Multi-destination Replies received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepMtvrInOutofOrder		1.3.6.1.2.1.238.1.1.1.1.8
Total number of valid, out-of-order Multi-destination Replies received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepMtvrOut		1.3.6.1.2.1.238.1.1.1.1.9
Total number of valid, Multi-destination Replies transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamMepTxLbmDestRName		1.3.6.1.2.1.238.1.1.1.1.10
The Target Destination RBridge Nickname field, as defined in RFC 6325, Section 3.7, to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65471

trillOamMepTxLbmHC		1.3.6.1.2.1.238.1.1.1.1.11
The Hop Count field to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..63

trillOamMepTxLbmReplyModeOob		1.3.6.1.2.1.238.1.1.1.1.12
True indicates that the Reply to an LBM is out of band and the out-of-band IP Address TLV is to be transmitted. False indicates that in-band reply is transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

trillOamMepTransmitLbmReplyIp		1.3.6.1.2.1.238.1.1.1.1.13
The IP address for an out-of-band IP Address TLV that is to be transmitted. Maximum length for IPv6 is 16 octets and IPv4 is 4 octets.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4..16)

trillOamMepTxLbmFlowEntropy		1.3.6.1.2.1.238.1.1.1.1.14
96-byte Flow Entropy, as defined in RFC 7455, to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(96)

trillOamMepTxPtmDestRName		1.3.6.1.2.1.238.1.1.1.1.15
The Target Destination RBridge Nickname field, as defined in RFC 6325, Section 3.7, to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65471

trillOamMepTxPtmHC		1.3.6.1.2.1.238.1.1.1.1.16
The Hop Count field to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..63

trillOamMepTxPtmReplyModeOob		1.3.6.1.2.1.238.1.1.1.1.17
True indicates that a Reply to a PTM will be out of band and the out-of-band IP Address TLV is to be transmitted. False indicates that an in-band reply is transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

trillOamMepTransmitPtmReplyIp		1.3.6.1.2.1.238.1.1.1.1.18
The IP address for an out-of-band IP Address TLV to be transmitted. The maximum length for an IPv6 address is 16 octets. The maximum length for an IPv4 address is 4 octets.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4..16)

trillOamMepTxPtmFlowEntropy		1.3.6.1.2.1.238.1.1.1.1.19
96-byte Flow Entropy, as defined in RFC 7455, to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(96)

trillOamMepTxPtmStatus		1.3.6.1.2.1.238.1.1.1.1.20
A Boolean flag set to TRUE by the MEP Path Trace Initiator State Machine or a MIB manager to indicate that another PTM is being transmitted. This is reset to FALSE by the MEP Initiator State Machine. The PTM managed objects in the MEP table are used in a manner similar to that described for LBM transmission in the dot1agCfmMepTable. As per RFC 7455, Section 10, operation of the Path Trace Message is identical to the Loopback message except that it is first transmitted with a TRILL Header Hop Count field value of 1 and then retransmitted with an incrementing Hop Count until a response is received from the destination RBridge, or the Hop Count reaches a configured maximum value. The trillOamMepTxPtmStatus status is reset to FALSE by the initiator when the last PTM is transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

trillOamMepTxPtmResultOK		1.3.6.1.2.1.238.1.1.1.1.21
Indicates the following results of the operation: - true indicates the Path Trace Message(s) will be (or has been) sent. - false indicates the Path Trace Message(s) will not be sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

trillOamMepTxPtmSeqNumber		1.3.6.1.2.1.238.1.1.1.1.22
The Path Trace Transaction Identifier of the first PTM (to be) sent. The value returned is undefined if trillOamMepTxPtmResultOK is false.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

trillOamMepTxPtmMessages		1.3.6.1.2.1.238.1.1.1.1.23
The number of Path Trace messages to be transmitted. As per RFC 7455, Section 10, the first Path Trace Message is transmitted with a Hop Count of 1; an RBridge may continue to retransmit the request at periodic intervals with an incrementing Hop Count until a response is received from the destination RBridge or the Hop Count reaches a configured maximum value. The event of the Destination response being received or the Hop Count reaching its maximum is treated as a single Counter increment of this object.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..1024

trillOamMepTxMtvmTree		1.3.6.1.2.1.238.1.1.1.1.24
The Multi-destination Tree identifier, as defined in RFC 6325, for an MTVM.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

trillOamMepTxMtvmHC		1.3.6.1.2.1.238.1.1.1.1.25
The Hop Count field to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..63

trillOamMepTxMtvmReplyModeOob		1.3.6.1.2.1.238.1.1.1.1.26
True indicates that the reply to an MTVM is out of band and this out-of-band IP Address TLV is where the reply is to be transmitted. False indicates that an in-band reply is transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

trillOamMepTransmitMtvmReplyIp		1.3.6.1.2.1.238.1.1.1.1.27
IP address for an out-of-band IP Address TLV that is to be transmitted. The maximum length for IPv6 is 16 octets and IPv4 is 4 octets.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4..16)

trillOamMepTxMtvmFlowEntropy		1.3.6.1.2.1.238.1.1.1.1.28
96-byte Flow Entropy, as defined in RFC 7455, to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(96)

trillOamMepTxMtvmStatus		1.3.6.1.2.1.238.1.1.1.1.29
A Boolean flag set to TRUE by the MEP Multi-destination Initiator State Machine or a MIB manager to indicate that another MTVM is being transmitted. Reset to FALSE by the MEP Initiator State Machine. The MTVM-managed objects in the MEP table are used in a manner similar to that described for LBM transmission in the dot1agCfmMepTable. As per RFC 7455, Section 11, operation of the MTVM is identical to the Loopback message except that it is first transmitted with a TRILL Header Hop Count field value of 1 and it is retransmitted incrementing the Hop Count until a response is received from the destination RBridge or the Hop Count reaches a configured maximum value. The trillOamMepTxMtvmStatus Status is reset to FALSE by the initiator when the last MTVM is transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

trillOamMepTxMtvmResultOK		1.3.6.1.2.1.238.1.1.1.1.30
Indicates the result of the operation in the following way: - true indicates the Multi-destination Message(s) will be (or has been) sent. - false indicates the Multi-destination Message(s) will not be sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

trillOamMepTxMtvmMessages		1.3.6.1.2.1.238.1.1.1.1.31
The number of Multi-destination messages to be transmitted. The RBridge transmit the Multi-destination message incrementing the session Identification Number at periodic interval until this count expires.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..1024

trillOamMepTxMtvmSeqNumber		1.3.6.1.2.1.238.1.1.1.1.32
The Multi-destination Transaction Identifier of the first MTVM (to be) sent. The value returned is undefined if trillOamMepTxMtvmResultOK is false.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

trillOamMepTxMtvmScopeList		1.3.6.1.2.1.238.1.1.1.1.33
The Multi-destination RBridge Scope list, which requires 2 octets per RBridge.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING

trillOamMepDiscontinuityTime		1.3.6.1.2.1.238.1.1.1.1.34
Snapshot of the value of the sysUpTime object at the beginning of the latest period of continuity of the statistical counters associated with this MEP.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

trillOamMepFlowCfgTable		1.3.6.1.2.1.238.1.1.2
This table includes configuration objects and operations for the TRILL OAM facilities in RFC 7455. Each row in the table represents a Flow Configuration Entry for the defined MEP. This table uses four indices. The first three indices are the indices of the Maintenance Domain, MANET, and MEP tables. The fourth index is the specific Flow Configuration Entry on the selected MEP. Some writable objects in this table are only applicable in certain cases (as described under each object), and attempts to write values for them in other cases will be ignored.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrillOamMepFlowCfgEntry

trillOamMepFlowCfgEntry		1.3.6.1.2.1.238.1.1.2.1
The conceptual row of trillOamMepFlowCfgTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TrillOamMepFlowCfgEntry

trillOamMepFlowCfgIndex		1.3.6.1.2.1.238.1.1.2.1.1
An index to the TRILL OAM MEP Flow Configuration table, which indicates the specific flow for the MEP. The index is never reused for other flow sessions on the same MEP while this session is active. The index value keeps increasing until it wraps to 0. This value can also be used in the flow-identifier TLV RFC 7455.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..65535

trillOamMepFlowCfgFlowEntropy		1.3.6.1.2.1.238.1.1.2.1.2
This is 96 bytes of Flow Entropy as described in TRILL OAM, RFC 7455.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(96)

trillOamMepFlowCfgDestRName		1.3.6.1.2.1.238.1.1.2.1.3
The Target Destination RBridge Nickname field, as defined in RFC 6325, Section 3.7, to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65471

trillOamMepFlowCfgFlowHC		1.3.6.1.2.1.238.1.1.2.1.4
The Hop Count field to be transmitted.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..63

trillOamMepFlowCfgRowStatus		1.3.6.1.2.1.238.1.1.2.1.5
The status of the row. The writable columns in a row cannot be changed if the row is active. All columns MUST have a valid value before a row can be activated.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

trillOamPtrTable		1.3.6.1.2.1.238.1.1.3
This table includes Path Trace Reply objects and operations for the TRILL OAM facilities as described in RFC 7455. Each row in the table represents a Path Trace Reply Entry for the defined MEP and Transaction. This table uses four indices. The first three indices are the indices of the Maintenance Domain, MANET, and MEP tables. The fourth index is the specific Transaction Identifier on the selected MEP. Some writable objects in this table are only applicable in certain cases (as described under each object), and attempts to write values for them in other cases will be ignored.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrillOamPtrEntry

trillOamPtrEntry		1.3.6.1.2.1.238.1.1.3.1
The conceptual row of trillOamPtrTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TrillOamPtrEntry

trillOamMepPtrTransactionId		1.3.6.1.2.1.238.1.1.3.1.1
Sequence Number / Transaction Identifier returned by a previous transmit path trace message command, indicating which PTM's response is going to be returned.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4294967295

trillOamMepPtrHC		1.3.6.1.2.1.238.1.1.3.1.2
Hop Count field value for a returned PTR.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..63

trillOamMepPtrFlag		1.3.6.1.2.1.238.1.1.3.1.3
FCOI (TRILL OAM Message TLV) field value for a returned PTR.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..15

trillOamMepPtrErrorCode		1.3.6.1.2.1.238.1.1.3.1.4
Return Code and Return Sub-code value for a returned PTR.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

trillOamMepPtrTerminalMep		1.3.6.1.2.1.238.1.1.3.1.5
A boolean value stating whether the forwarded PTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

trillOamMepPtrLastEgressId		1.3.6.1.2.1.238.1.1.3.1.6
An Integer field holding the Last Egress Identifier returned in the PTR Upstream RBridge Nickname TLV of the PTR. The Last Egress Identifier identifies the Upstream Nickname.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

trillOamMepPtrIngress		1.3.6.1.2.1.238.1.1.3.1.7
The value returned in the Ingress Action field of the PTR. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the PTM.
Status: current	Access: read-only
OBJECT-TYPE
	Dot1agCfmIngressActionFieldValue

trillOamMepPtrIngressMac		1.3.6.1.2.1.238.1.1.3.1.8
MAC address returned in the ingress MAC address field.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

trillOamMepPtrIngressPortIdSubtype		1.3.6.1.2.1.238.1.1.3.1.9
Ingress Port ID. The format of this object is determined by the value of the trillOamMepPtrIngressPortIdSubtype object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortIdSubtype

trillOamMepPtrIngressPortId		1.3.6.1.2.1.238.1.1.3.1.10
Ingress Port ID. The format of this object is determined by the value of the trillOamMepPtrIngressPortId object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortId

trillOamMepPtrEgress		1.3.6.1.2.1.238.1.1.3.1.11
The value returned in the Egress Action field of the PTR. The value ingNoTlv(0) indicates that no Reply Egress TLV was returned in the PTM.
Status: current	Access: read-only
OBJECT-TYPE
	Dot1agCfmEgressActionFieldValue

trillOamMepPtrEgressMac		1.3.6.1.2.1.238.1.1.3.1.12
MAC address returned in the egress MAC address field.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

trillOamMepPtrEgressPortIdSubtype		1.3.6.1.2.1.238.1.1.3.1.13
Egress Port ID. The format of this object is determined by the value of the trillOamMepPtrEgressPortIdSubtype object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortIdSubtype

trillOamMepPtrEgressPortId		1.3.6.1.2.1.238.1.1.3.1.14
Egress Port ID. The format of this object is determined by the value of the trillOamMepPtrEgressPortId object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortId

trillOamMepPtrChassisIdSubtype		1.3.6.1.2.1.238.1.1.3.1.15
This object specifies the format of the Chassis ID returned in the Sender ID TLV of the PTR, if any. This value is meaningless if the trillOamMepPtrChassisId has a length of 0.
Status: current	Access: read-only
OBJECT-TYPE
	LldpChassisIdSubtype

trillOamMepPtrChassisId		1.3.6.1.2.1.238.1.1.3.1.16
The Chassis ID returned in the Sender ID TLV of the PTR, if any. The format of this object is determined by the value of the trillOamMepPtrChassisIdSubtype object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpChassisId

trillOamMepPtrOrganizationSpecificTlv		1.3.6.1.2.1.238.1.1.3.1.17
All organization-specific TLVs returned in the PTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..1500)

trillOamMepPtrNextHopNicknames		1.3.6.1.2.1.238.1.1.3.1.18
Next hop RBridge List TLV returned in the PTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..1500)

trillOamMtvrTable		1.3.6.1.2.1.238.1.1.4
This table includes Multi-destination Reply objects and operations for the TRILL OAM facilities described in RFC 7455. Each row in the table represents a Multi-destination Reply Entry for the defined MEP and Transaction. This table uses five indices. The first three indices are the indices of the Maintenance Domain, MANET, and MEP tables. The fourth index is the specific Transaction Identifier on the selected MEP. The fifth index is the receive order of Multi-destination replies. Some writable objects in this table are only applicable in certain cases (as described under each object), and attempts to write values for them in other cases will be ignored.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrillOamMtvrEntry

trillOamMtvrEntry		1.3.6.1.2.1.238.1.1.4.1
The conceptual row of trillOamMtvrTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TrillOamMtvrEntry

trillOamMepMtvrTransactionId		1.3.6.1.2.1.238.1.1.4.1.1
Sequence Number / Transaction Identifier returned by a previously transmitted Multi-destination message command indicating which MTVM's response is going to be returned.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4294967295

trillOamMepMtvrReceiveOrder		1.3.6.1.2.1.238.1.1.4.1.2
An index to distinguish among multiple MTVRs with same MTVR Transaction Identifier field value. trillOamMepMtvrReceiveOrder is assigned sequentially from 1, in the order that the Multi-destination Tree Initiator received the MTVRs.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

trillOamMepMtvrFlag		1.3.6.1.2.1.238.1.1.4.1.3
FCOI (TRILL OAM Message TLV) field value for a returned MTVR.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..15

trillOamMepMtvrErrorCode		1.3.6.1.2.1.238.1.1.4.1.4
Return Code and Return Sub-code value for a returned MTVR.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

trillOamMepMtvrLastEgressId		1.3.6.1.2.1.238.1.1.4.1.5
An Integer field holding the Last Egress Identifier returned in the MTVR Upstream RBridge Nickname TLV of the MTVR. The Last Egress Identifier identifies the Upstream Nickname.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

trillOamMepMtvrIngress		1.3.6.1.2.1.238.1.1.4.1.6
The value returned in the Ingress Action field of the MTVR. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the MTVM.
Status: current	Access: read-only
OBJECT-TYPE
	Dot1agCfmIngressActionFieldValue

trillOamMepMtvrIngressMac		1.3.6.1.2.1.238.1.1.4.1.7
MAC address returned in the ingress MAC address field.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

trillOamMepMtvrIngressPortIdSubtype		1.3.6.1.2.1.238.1.1.4.1.8
Ingress Port ID. The format of this object is determined by the value of the trillOamMepMtvrIngressPortIdSubtype object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortIdSubtype

trillOamMepMtvrIngressPortId		1.3.6.1.2.1.238.1.1.4.1.9
Ingress Port ID. The format of this object is determined by the value of the trillOamMepMtvrIngressPortId object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortId

trillOamMepMtvrEgress		1.3.6.1.2.1.238.1.1.4.1.10
The value returned in the Egress Action field of the MTVR. The value ingNoTlv(0) indicates that no Reply Egress TLV was returned in the MTVR.
Status: current	Access: read-only
OBJECT-TYPE
	Dot1agCfmEgressActionFieldValue

trillOamMepMtvrEgressMac		1.3.6.1.2.1.238.1.1.4.1.11
MAC address returned in the egress MAC address field.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

trillOamMepMtvrEgressPortIdSubtype		1.3.6.1.2.1.238.1.1.4.1.12
Egress Port ID. The format of this object is determined by the value of the trillOamMepMtvrEgressPortIdSubtype object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortIdSubtype

trillOamMepMtvrEgressPortId		1.3.6.1.2.1.238.1.1.4.1.13
Egress Port ID. The format of this object is determined by the value of the trillOamMepMtvrEgressPortId object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpPortId

trillOamMepMtvrChassisIdSubtype		1.3.6.1.2.1.238.1.1.4.1.14
This object specifies the format of the Chassis ID returned in the Sender ID TLV of the MTVR, if any. This value is meaningless if the trillOamMepMtvrChassisId has a length of 0.
Status: current	Access: read-only
OBJECT-TYPE
	LldpChassisIdSubtype

trillOamMepMtvrChassisId		1.3.6.1.2.1.238.1.1.4.1.15
The Chassis ID returned in the Sender ID TLV of the MTVR, if any. The format of this object is determined by the value of the trillOamMepMtvrChassisIdSubtype object.
Status: current	Access: read-only
OBJECT-TYPE
	LldpChassisId

trillOamMepMtvrOrganizationSpecificTlv		1.3.6.1.2.1.238.1.1.4.1.16
All organization-specific TLVs returned in the MTVR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..1500)

trillOamMepMtvrNextHopNicknames		1.3.6.1.2.1.238.1.1.4.1.17
Next hop RBridge List TLV returned in the PTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..1500)

trillOamMepMtvrReceiverAvailability		1.3.6.1.2.1.238.1.1.4.1.18
A value of true indicates that the MTVR response contained Multicast receiver availability TLV.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

trillOamMepMtvrReceiverCount		1.3.6.1.2.1.238.1.1.4.1.19
Indicates the number of multicast receivers available on the responding RBridge on the VLAN specified by the diagnostic VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

trillOamMepDbTable		1.3.6.1.2.1.238.1.1.5
This table is an extension of the dot1agCfmMepDbTable and rows are automatically added to or deleted from this table based upon row creation and destruction of the dot1agCfmMepDbTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrillOamMepDbEntry

trillOamMepDbEntry		1.3.6.1.2.1.238.1.1.5.1
The conceptual row of trillOamMepDbTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TrillOamMepDbEntry

trillOamMepDbFlowIndex		1.3.6.1.2.1.238.1.1.5.1.1
This object identifies the flow. If the Flow Identifier TLV is received, then the index received can also be used.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

trillOamMepDbFlowEntropy		1.3.6.1.2.1.238.1.1.5.1.2
96 byte Flow Entropy.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(96)

trillOamMepDbFlowState		1.3.6.1.2.1.238.1.1.5.1.3
The operational state of the remote MEP (flow-based) IFF State machines. State Machine is running now per flow.
Status: current	Access: read-only
OBJECT-TYPE
	Dot1agCfmRemoteMepState

trillOamMepDbFlowFailedOkTime		1.3.6.1.2.1.238.1.1.5.1.4
The Time (sysUpTime) at which the Remote MEP flow state machine last entered either the RMEP_FAILED or RMEP_OK state.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

trillOamMepDbRBridgeName		1.3.6.1.2.1.238.1.1.5.1.5
Remote MEP RBridge Nickname.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65471

trillOamMepDbLastGoodSeqNum		1.3.6.1.2.1.238.1.1.5.1.6
Last Sequence Number received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

trillOamFaultAlarm		1.3.6.1.2.1.238.0.1
A MEP flow has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the flow that has detected the fault. The management entity receiving the notification can identify the system from the network source address of the notification and can identify the flow reporting the defect by the indices in the OID of the trillOamMepFlowIndex and trillOamFlowDefect variable in the notification: dot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry (dot1agCfmMdTable). dot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (dot1agCfmMaNetTable) and (with the MD table index and component ID) of the MEP's MA component table entry (dot1agCfmMaCompTable). dot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (dot1agCfmMepTable). trillOamMepFlowCfgIndex - Index identifies indicates the specific flow for the MEP
Status: current	Access: read-only
NOTIFICATION-TYPE

trillOamMibCompliances		1.3.6.1.2.1.238.2.1
OBJECT IDENTIFIER

trillOamMibGroups		1.3.6.1.2.1.238.2.2
OBJECT IDENTIFIER

trillOamMepMandatoryGroup		1.3.6.1.2.1.238.2.2.1
Mandatory objects for the TRILL OAM MEP group.
Status: current	Access: read-only
OBJECT-GROUP

trillOamMepFlowCfgTableGroup		1.3.6.1.2.1.238.2.2.2
TRILL OAM MEP Flow Configuration objects group.
Status: current	Access: read-only
OBJECT-GROUP

trillOamPtrTableGroup		1.3.6.1.2.1.238.2.2.3
TRILL OAM MEP PTR objects group.
Status: current	Access: read-only
OBJECT-GROUP

trillOamMtvrTableGroup		1.3.6.1.2.1.238.2.2.4
TRILL OAM MEP MTVR objects group.
Status: current	Access: read-only
OBJECT-GROUP

trillOamMepDbGroup		1.3.6.1.2.1.238.2.2.5
TRILL OAM MEP DB objects group.
Status: current	Access: read-only
OBJECT-GROUP

trillOamNotificationGroup		1.3.6.1.2.1.238.2.2.6
A collection of objects describing notifications(traps).
Status: current	Access: read-only
NOTIFICATION-GROUP

trillOamMibCompliance		1.3.6.1.2.1.238.2.1.1
The compliance statement for the TRILL OAM MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

trillOamMibReadOnlyCompliance		1.3.6.1.2.1.238.2.1.2
Compliance requirement for implementations that only provide read-only support for TRILL-OAM-MIB. Such devices can be monitored but cannot be configured using this MIB module.
Status: current	Access: read-only
MODULE-COMPLIANCE