TRANGOM5830S-MIB
File:
TRANGOM5830S-MIB.mib (49810 bytes)
Imported modules
Imported symbols
Defined Types
| SuInfoEntry |
|
| SEQUENCE |
|
|
|
| |
suID |
INTEGER |
|
| |
suMAC |
OCTET STRING |
|
| |
suPolling |
INTEGER |
|
| |
suSUtoSU |
INTEGER |
|
| |
suCIR |
INTEGER |
|
| |
suMIR |
INTEGER |
|
| |
suIPAddr |
IpAddress |
|
| |
suRemarks |
DisplayString |
|
| |
suHWVer |
OCTET STRING |
|
| |
suFWVer |
DisplayString |
|
| |
suFPGAVer |
OCTET STRING |
|
| |
suChecksum |
OCTET STRING |
|
| |
suAssociation |
INTEGER |
|
| |
suDIstance |
INTEGER |
|
| |
suRSSIFromSU |
INTEGER |
|
| |
suRSSIFromAP |
INTEGER |
|
| |
suTxPower |
INTEGER |
|
| |
suEthRxAvgThroughputLog |
INTEGER |
|
| |
suEthTxAvgThroughputLog |
INTEGER |
|
| |
suRfRxAvgThroughputLog |
INTEGER |
|
| |
suRfTxAvgThroughputLog |
INTEGER |
|
| |
suRfInOctets |
Counter |
|
| |
suRfOutOctets |
Counter |
|
| |
suPowerLevel |
INTEGER |
|
| |
suTemperature |
INTEGER |
|
| |
suReboot |
INTEGER |
|
| |
suTCPIPForLocalEth |
INTEGER |
|
| TrapconfigTrapEntry |
|
| SEQUENCE |
|
|
|
| |
aptrpIndex |
INTEGER |
|
| |
aptrpID |
INTEGER |
|
| |
aptrpCommStr |
DisplayString |
|
| |
aptrpEnable |
INTEGER |
|
Defined Values
| trango |
1.3.6.1.4.1.5454 |
| OBJECT IDENTIFIER |
|
|
|
| tbw |
1.3.6.1.4.1.5454.1 |
| OBJECT IDENTIFIER |
|
|
|
| m5830sap |
1.3.6.1.4.1.5454.1.20 |
| OBJECT IDENTIFIER |
|
|
|
| apsystem |
1.3.6.1.4.1.5454.1.20.1 |
| OBJECT IDENTIFIER |
|
|
|
| aprf |
1.3.6.1.4.1.5454.1.20.2 |
| OBJECT IDENTIFIER |
|
|
|
| su |
1.3.6.1.4.1.5454.1.20.3 |
| OBJECT IDENTIFIER |
|
|
|
| trapconfig |
1.3.6.1.4.1.5454.1.20.4 |
| OBJECT IDENTIFIER |
|
|
|
| mibinfo |
1.3.6.1.4.1.5454.1.20.5 |
| OBJECT IDENTIFIER |
|
|
|
| apversion |
1.3.6.1.4.1.5454.1.20.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| apswitches |
1.3.6.1.4.1.5454.1.20.1.13 |
| OBJECT IDENTIFIER |
|
|
|
| aptraffic |
1.3.6.1.4.1.5454.1.20.1.15 |
| OBJECT IDENTIFIER |
|
|
|
| apipconfig |
1.3.6.1.4.1.5454.1.20.1.19 |
| OBJECT IDENTIFIER |
|
|
|
| aprftable |
1.3.6.1.4.1.5454.1.20.2.3 |
| OBJECT IDENTIFIER |
|
|
|
| apism |
1.3.6.1.4.1.5454.1.20.2.4 |
| OBJECT IDENTIFIER |
|
|
|
| apunii |
1.3.6.1.4.1.5454.1.20.2.5 |
| OBJECT IDENTIFIER |
|
|
|
| sudb |
1.3.6.1.4.1.5454.1.20.3.5 |
| OBJECT IDENTIFIER |
|
|
|
| apversionHW |
1.3.6.1.4.1.5454.1.20.1.1.1 |
| Hardware version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| apversionFW |
1.3.6.1.4.1.5454.1.20.1.1.2 |
Main firmware version.
Format: HD. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..80) |
|
| apversionFPGA |
1.3.6.1.4.1.5454.1.20.1.1.3 |
| FPGA firmware version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| apversionChecksum |
1.3.6.1.4.1.5454.1.20.1.1.4 |
| AP firmware checksum. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| apsystemDeviceId |
1.3.6.1.4.1.5454.1.20.1.2 |
| MAC address. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| apsystemBaseId |
1.3.6.1.4.1.5454.1.20.1.3 |
| Cluster that the AP belongs to.
All APs and SUs in the same cluster shall have the same Base ID. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..127 |
|
| apsystemAPId |
1.3.6.1.4.1.5454.1.20.1.4 |
| AP ID. Each AP in a cluster shall have unique AP ID. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..255 |
|
| apsystemDefOpMode |
1.3.6.1.4.1.5454.1.20.1.5 |
| The operation mode (ap or off) the radio is on after reboot/power cycle. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ap(1), off(0) |
|
| apsystemCurOpMode |
1.3.6.1.4.1.5454.1.20.1.6 |
| Radio's current operation mode. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ap(1), off(0) |
|
| apsystemActivateOpmode |
1.3.6.1.4.1.5454.1.20.1.7 |
| Engage AP unit to ap operation mode. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), activateapmode(1) |
|
| apsystemIpAddr |
1.3.6.1.4.1.5454.1.20.1.8 |
| Current IP address. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| apsystemSubnet |
1.3.6.1.4.1.5454.1.20.1.9 |
| Current Subnet mask. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| apsystemReadCommStr |
1.3.6.1.4.1.5454.1.20.1.11 |
| SNMP agent read community string. It is used for authentication purpose. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..32) |
|
| apsystemWriteCommStr |
1.3.6.1.4.1.5454.1.20.1.12 |
| SNMP agent write community string. It is used for authentication purpose. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..32) |
|
| apswitchesBlockBroadcastMulticast |
1.3.6.1.4.1.5454.1.20.1.13.1 |
| This switch enables or disables the blocking of Ethernet
control packet except ICMP and ARP to reduce the amount
of uneccessary overhead introduced to the wireless link. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
passed(0), blocked(1) |
|
| apswitchesSUtoSU |
1.3.6.1.4.1.5454.1.20.1.13.2 |
| This switch enables or disables the peer-to-peer
feature among SUs through the AP. Before this switch
is turned on, all SUs that want to communicate with
each other have to be assigned to the same group. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| apswitchesTFTPD |
1.3.6.1.4.1.5454.1.20.1.13.4 |
| This switch enables or disables the TFTP operation. When
it is turned on, then the AP will be ready for code download. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| apswitchesHTTPD |
1.3.6.1.4.1.5454.1.20.1.13.5 |
| When it is turned on, then the AP is accessible for
configuring via web browser (e.g. IE or Nescape). |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| apsystemMIRThreshold |
1.3.6.1.4.1.5454.1.20.1.14 |
| Maximum Information Rate (in Kbps), the AP allows the
network to utilize before enforcing CIR on each subscriber. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), fourmbps(4), fivembps(5), sixmbps(6), sevenmbps(7), eightmbps(8) |
|
| aptrafficEthRxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.1.15.1 |
| Average payload data throughput (in Kbits/sec)
received on Ethernet port over the last 60 seconds. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| aptrafficEthTxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.1.15.2 |
| Average payload data throughput (in Kbits/sec)
transmitted on Ethernet port over the last 60 seconds. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| aptrafficRfRxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.1.15.3 |
| Average payload data throughput (in Kbits/sec)
received on RF port over the last 60 seconds. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| aptrafficRfTxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.1.15.4 |
| Average payload data throughput (in Kbits/sec)
transmitted on RF port over the last 60 seconds. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| aptrafficEthInOctets |
1.3.6.1.4.1.5454.1.20.1.15.5 |
| Number of payload octets received on Ethernet port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| aptrafficEthOutOctets |
1.3.6.1.4.1.5454.1.20.1.15.6 |
| Number of payload octets transmitted on Ethernet port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| aptrafficRfInOctets |
1.3.6.1.4.1.5454.1.20.1.15.7 |
| Number of octets of SUs payload received from RF port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| aptrafficRfOutOctets |
1.3.6.1.4.1.5454.1.20.1.15.8 |
| Number of octets of SUs payload transmitted to RF port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| apsystemTemperature |
1.3.6.1.4.1.5454.1.20.1.16 |
| Current AP temperature value (in Celsius). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| apsystemUpdateFlashAndActivate |
1.3.6.1.4.1.5454.1.20.1.17 |
| Save system setting values to Flash and activate the settings. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no(0), yes(1) |
|
| apsystemReboot |
1.3.6.1.4.1.5454.1.20.1.18 |
| Reboot the radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), activated(1) |
|
| apipconfigIpAddress |
1.3.6.1.4.1.5454.1.20.1.19.1 |
| New IP address. It will be saved to
non-volatile memory and activated in 5 secs. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| apipconfigSubnet |
1.3.6.1.4.1.5454.1.20.1.19.2 |
| New Subnet mask. It will be saved to
non-volatile memory and activated in 5 secs. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| apipconfigDefaultGateway |
1.3.6.1.4.1.5454.1.20.1.19.3 |
| New Default gateway. It will be saved to
non-volatile memory and activated in 5 secs. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| aprfActiveChannel |
1.3.6.1.4.1.5454.1.20.2.1 |
| It specifies the current channel number the radio operates on. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..30 |
|
| aprfActivePolarization |
1.3.6.1.4.1.5454.1.20.2.2 |
| It specifies the current polarization the radio operates on. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(1) |
|
| aprftableChannel1 |
1.3.6.1.4.1.5454.1.20.2.3.1 |
| RF channel 1 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel2 |
1.3.6.1.4.1.5454.1.20.2.3.2 |
| RF channel 2 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel3 |
1.3.6.1.4.1.5454.1.20.2.3.3 |
| RF channel 3 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel4 |
1.3.6.1.4.1.5454.1.20.2.3.4 |
| RF channel 4 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel5 |
1.3.6.1.4.1.5454.1.20.2.3.5 |
| RF channel 5 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel6 |
1.3.6.1.4.1.5454.1.20.2.3.6 |
| RF channel 6 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel7 |
1.3.6.1.4.1.5454.1.20.2.3.7 |
| RF channel 7 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel8 |
1.3.6.1.4.1.5454.1.20.2.3.8 |
| RF channel 8 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel9 |
1.3.6.1.4.1.5454.1.20.2.3.9 |
| RF channel 9 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel10 |
1.3.6.1.4.1.5454.1.20.2.3.10 |
| RF channel 10 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel11 |
1.3.6.1.4.1.5454.1.20.2.3.11 |
| RF channel 11 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel12 |
1.3.6.1.4.1.5454.1.20.2.3.12 |
| RF channel 12 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel13 |
1.3.6.1.4.1.5454.1.20.2.3.13 |
| RF channel 13 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel14 |
1.3.6.1.4.1.5454.1.20.2.3.14 |
| RF channel 14 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel15 |
1.3.6.1.4.1.5454.1.20.2.3.15 |
| RF channel 15 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel16 |
1.3.6.1.4.1.5454.1.20.2.3.16 |
| RF channel 16 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel17 |
1.3.6.1.4.1.5454.1.20.2.3.17 |
| RF channel 17 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel18 |
1.3.6.1.4.1.5454.1.20.2.3.18 |
| RF channel 18 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel19 |
1.3.6.1.4.1.5454.1.20.2.3.19 |
| RF channel 19 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel20 |
1.3.6.1.4.1.5454.1.20.2.3.20 |
| RF channel 20 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel21 |
1.3.6.1.4.1.5454.1.20.2.3.21 |
| RF channel 21 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel22 |
1.3.6.1.4.1.5454.1.20.2.3.22 |
| RF channel 22 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel23 |
1.3.6.1.4.1.5454.1.20.2.3.23 |
| RF channel 23 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel24 |
1.3.6.1.4.1.5454.1.20.2.3.24 |
| RF channel 24 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel25 |
1.3.6.1.4.1.5454.1.20.2.3.25 |
| RF channel 25 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel26 |
1.3.6.1.4.1.5454.1.20.2.3.26 |
| RF channel 26 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel27 |
1.3.6.1.4.1.5454.1.20.2.3.27 |
| RF channel 27 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel28 |
1.3.6.1.4.1.5454.1.20.2.3.28 |
| RF channel 28 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel29 |
1.3.6.1.4.1.5454.1.20.2.3.29 |
| RF channel 29 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| aprftableChannel30 |
1.3.6.1.4.1.5454.1.20.2.3.30 |
| RF channel 30 frequency (in MHz). It allows you to create your
own channel instead of the manufacturing defaults in the AP.
Keep in mind that channel width is 20MHz, and the frequency
specified here is the center frequency.
Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
5260..5340 | 5736..5836 |
|
| apismTxPowerMax |
1.3.6.1.4.1.5454.1.20.2.4.1 |
| The maximum ISM Tx power value can be set (in dBm). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| apismTxPowerMin |
1.3.6.1.4.1.5454.1.20.2.4.2 |
| The minimum ISM Tx power value can be set (in dBm). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| apismTxPower |
1.3.6.1.4.1.5454.1.20.2.4.3 |
| ISM RF tx power (in dBm). It specifies the power output
of the radio, excluding the antenna gain. Check parameters
apismTxPowerMax and apismTxPowerMin for power setting range. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| apismServiceRadius |
1.3.6.1.4.1.5454.1.20.2.4.4 |
| ISM RF service radius (in mile). It specifies the distance of
the furthest SU the AP will serve. Based on this information,
the AP will determine the maximum wait time for a SU to
response to a poll before it starts to poll the next one. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
threemiles(3), tenmiles(10), twentymiles(20) |
|
| apismRxThreshold |
1.3.6.1.4.1.5454.1.20.2.4.5 |
| ISM RF rx threshold (in dBm). It specifies the receiver sensitivity
of the AP. By default, the radio's sensitivity is -82dBm.
The higher the threshold is, the less sensitive the radio will be.
In M5800S, the value -90 represents the rfrxthreshold is disabled. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-90 | -85 | -80 | -75 | -70 | -65 |
|
| apuniiTxPowerMax |
1.3.6.1.4.1.5454.1.20.2.5.1 |
| This object is only applicable to M5830S radio.
The maximum UNII Tx power value can be set (in dBm). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| apuniiTxPowerMin |
1.3.6.1.4.1.5454.1.20.2.5.2 |
| This object is only applicable to M5830S radio.
The minimum UNII Tx power value can be set (in dBm). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| apuniiTxPower |
1.3.6.1.4.1.5454.1.20.2.5.3 |
| This object is only applicable to M5830S radio.
UNII RF tx power (in dBm). It specifies the power output
of the radio, excluding the antenna gain. Check parameters
apuniiTxPowerMax and apuniiTxPowerMin for power setting range. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| apuniiServiceRadius |
1.3.6.1.4.1.5454.1.20.2.5.4 |
| This object is only applicable to M5830S radio.
UNII RF service radius (in mile). It specifies the distance of
the furthest SU the AP will serve. Based on this information,
the AP will determine the maximum wait time for a SU to
response to a poll before it starts to poll the next one. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
twomiles(2), threemiles(3), fourmiles(4) |
|
| apuniiRxThreshold |
1.3.6.1.4.1.5454.1.20.2.5.5 |
| This object is only applicable to M5830S radio.
UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-90 | -85 | -80 | -75 | -70 | -65 |
|
| suSUCount |
1.3.6.1.4.1.5454.1.20.3.1 |
| Number of subscriber units in the subscriber database. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..500 |
|
| suPowerLvlAll |
1.3.6.1.4.1.5454.1.20.3.2 |
| It is a feature that is typically found in more
elaborate mobile systems such as cellular CDMA
networks. Using this feature, all SUs have their
RF power output adjusted until the signal strength
for each SU as received in the AP is roughly the same. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), activated(1) |
|
| suStatisticsSamplePeriod |
1.3.6.1.4.1.5454.1.20.3.3 |
| A period (in minute) AP requests update on SU Info Table from all associated SUs. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..60 |
|
| suRebootAll |
1.3.6.1.4.1.5454.1.20.3.4 |
| AP broadcasts reboot command to all subscriber units. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), activated(1) |
|
| sudbDeleteOrAddID |
1.3.6.1.4.1.5454.1.20.3.5.1 |
| Subscriber unit ID (1..8190). Each
subscriber in a sector shall have a unique ID. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..8190 |
|
| sudbAddMAC |
1.3.6.1.4.1.5454.1.20.3.5.2 |
| It is the MAC address of the subscriber unit,
which can be found on the back of the SU. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| sudbAddPolling |
1.3.6.1.4.1.5454.1.20.3.5.3 |
| It is service level value, regular or priority, of a SU.
The AP will poll priority user more often, thus better
network latency as the result. As the network latency
varies based on the number of subscriber units the AP
serves, priority user is guaranteed that the latency is
NOT greater than 100ms regardless of the size of the network. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
regular(1), priority(5) |
|
| sudbAddSUtoSU |
1.3.6.1.4.1.5454.1.20.3.5.4 |
| It is peer-to-peer group this SU belongs to.
With the SU to SU switch is turned on, SUs in
the same peer-to-peer group can communicate to
each other via the AP. There are totally 15 groups
available. Note that the SU shall be set to priority
user for this feature to improve latency. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
nullgroup(0), group1(1), group2(2), group3(3), group4(4), group5(5), group6(6), group7(7), group8(8), group9(9), groupA(10), groupB(11), groupC(12), groupD(13), groupE(14), groupF(15) |
|
| sudbAddCIR |
1.3.6.1.4.1.5454.1.20.3.5.5 |
| It is the Committed Information Rate (in Kbps) the AP allocates to SU. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..9999 |
|
| sudbAddMIR |
1.3.6.1.4.1.5454.1.20.3.5.6 |
| It is the Maximum Information Rate (in Kbps) the AP allocates to SU. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..9999 |
|
| sudbAdd |
1.3.6.1.4.1.5454.1.20.3.5.7 |
| Add a subscriber (specified in object sudbDeleteOrAddID) to the subscriber database. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), add(1) |
|
| sudbDelete |
1.3.6.1.4.1.5454.1.20.3.5.8 |
| Delete a subscriber (specified in object sudbDeleteOrAddID) from the subscriber database. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), delete(1) |
|
| suInfoTable |
1.3.6.1.4.1.5454.1.20.3.6 |
| A table that contains subscriber unit entities. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SuInfoEntry |
|
| suInfoEntry |
1.3.6.1.4.1.5454.1.20.3.6.1 |
| Information about a specific subscriber unit retrieved by its ID number. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SuInfoEntry |
|
|
| suID |
1.3.6.1.4.1.5454.1.20.3.6.1.1 |
| Subscriber unit ID. Each subscriber in a sector shall have a unique ID. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..8190 |
|
| suMAC |
1.3.6.1.4.1.5454.1.20.3.6.1.2 |
| Subscriber unit MAC Address. Format: 00 01 DE xx xx xx. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(6) |
|
| suPolling |
1.3.6.1.4.1.5454.1.20.3.6.1.3 |
| It is service level value, regular or priority, of a SU.
The AP will poll priority user more often, thus better
network latency as the result. As the network latency
varies based on the number of subscriber units the AP
serves, priority user is guaranteed that the latency is
NOT greater than 100ms regardless of the size of the network. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
regular(1), priority(5) |
|
| suSUtoSU |
1.3.6.1.4.1.5454.1.20.3.6.1.4 |
| It is peer-to-peer group this SU belongs to.
With the SU to SU switch is turned on, SUs in
the same peer-to-peer group can communicate to
each other via the AP. There are totally 15 groups
available. Note that the SU shall be set to priority
user for this feature to improve latency. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
nullgroup(0), group1(1), group2(2), group3(3), group4(4), group5(5), group6(6), group7(7), group8(8), group9(9), groupA(10), groupB(11), groupC(12), groupD(13), groupE(14), groupF(15) |
|
| suCIR |
1.3.6.1.4.1.5454.1.20.3.6.1.5 |
| It is the Committed Information Rate (in Kbps) the AP allocates to SU. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..9999 |
|
| suMIR |
1.3.6.1.4.1.5454.1.20.3.6.1.6 |
| It is the Maximum Information Rate (in Kbps) the AP allocates to SU. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..9999 |
|
| suIPAddr |
1.3.6.1.4.1.5454.1.20.3.6.1.7 |
| Subscriber unit IP Address. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| suHWVer |
1.3.6.1.4.1.5454.1.20.3.6.1.9 |
| Subscriber unit Hardware Version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| suFWVer |
1.3.6.1.4.1.5454.1.20.3.6.1.10 |
| Subscriber unit main firmware version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..32) |
|
| suFPGAVer |
1.3.6.1.4.1.5454.1.20.3.6.1.11 |
| Subscriber unit FPGA firmware version. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| suChecksum |
1.3.6.1.4.1.5454.1.20.3.6.1.12 |
| Subscriber unit firmware checksum. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(4) |
|
| suAssociation |
1.3.6.1.4.1.5454.1.20.3.6.1.13 |
| Subscriber unit association status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
associated(1), notAssociated(0) |
|
| suDIstance |
1.3.6.1.4.1.5454.1.20.3.6.1.14 |
| Distance of SU (in mile). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..40 |
|
| suTxPower |
1.3.6.1.4.1.5454.1.20.3.6.1.17 |
| Subscriber unit Tx Power Level (in dBm). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| suEthRxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.3.6.1.18 |
| Average payload data throughput (in Kbits/sec) received on the
Ethernet port over the period specified by suStatisticsSamplePeriod. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| suEthTxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.3.6.1.19 |
| Average payload data throughput (in Kbits/sec) transmitted on the
Ethernet port over the period specified by suStatisticsSamplePeriod. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| suRfRxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.3.6.1.20 |
| Average payload data throughput (in Kbits/sec) received on the
RF port over the period specified by suStatisticsSamplePeriod. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| suRfTxAvgThroughputLog |
1.3.6.1.4.1.5454.1.20.3.6.1.21 |
| Average payload data throughput (in Kbits/sec) transmitted on the
RF port over the period specified by suStatisticsSamplePeriod. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| suRfInOctets |
1.3.6.1.4.1.5454.1.20.3.6.1.22 |
| Number of payload octets received on the RF port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| suRfOutOctets |
1.3.6.1.4.1.5454.1.20.3.6.1.23 |
| Number of payload octets transmitted on the RF port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| suPowerLevel |
1.3.6.1.4.1.5454.1.20.3.6.1.24 |
| It is a feature that is typically found in more
elaborate mobile systems such as cellular CDMA
networks. Using this feature, the SU has its
RF power output adjusted until its signal strength
received in the AP is roughly the same. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), activated(1) |
|
| suTemperature |
1.3.6.1.4.1.5454.1.20.3.6.1.25 |
| Subscriber Unit temperature reading value (in Celsius). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-128..127 |
|
| suReboot |
1.3.6.1.4.1.5454.1.20.3.6.1.26 |
| AP issues reboot command to a specific subscriber unit. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deactivated(0), activated(1) |
|
| suTCPIPForLocalEth |
1.3.6.1.4.1.5454.1.20.3.6.1.27 |
| When it is turned on, then the SU will process all the local TCP/IP service. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| trapconfigTrapCount |
1.3.6.1.4.1.5454.1.20.4.1 |
| Types of trap. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..255 |
|
| trapconfigTrapEntry |
1.3.6.1.4.1.5454.1.20.4.4.1 |
| Information about a specific Trango trap event. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TrapconfigTrapEntry |
|
|
| aptrpIndex |
1.3.6.1.4.1.5454.1.20.4.4.1.1 |
| Trap index. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..5 |
|
| aptrpID |
1.3.6.1.4.1.5454.1.20.4.4.1.2 |
| Specific trap ID. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
7..255 |
|
| aptrpCommStr |
1.3.6.1.4.1.5454.1.20.4.4.1.3 |
| Specific trap community string. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..32) |
|
| aptrpEnable |
1.3.6.1.4.1.5454.1.20.4.4.1.4 |
| Enable a specific Trango trap event or not. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| suLinkUp |
7 |
| The SNMP trap that is generated when a specific SU Associated. |
| TRAP-TYPE |
|
|
|
| suLinkDown |
8 |
| The SNMP trap that is generated when a specific SU Powered Off. |
| TRAP-TYPE |
|
|
|
| apOpModeFailure |
9 |
| The SNMP trap that is generated when a specific AP
not being in ap mode during boot up sequence. |
| TRAP-TYPE |
|
|
|