TRANGO-APEX-RF-MIB

File: TRANGO-APEX-RF-MIB.mib (6675 bytes)

Imported modules

TRANGO-APEX-MIB	SNMPv2-TC	SNMPv2-CONF
SNMPv2-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	OBJECT-IDENTITY
NOTIFICATION-TYPE	apex	DisplayString
MODULE-COMPLIANCE	Counter32	Opaque

Defined Values

rf		1.3.6.1.4.1.5454.1.60.3
OBJECT IDENTIFIER

atpc		1.3.6.1.4.1.5454.1.60.3.1
OBJECT IDENTIFIER

rfATPCEnable		1.3.6.1.4.1.5454.1.60.3.1.1
Enable/Disable Automatic Transmit Power Control
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

rfATPCMaxPower		1.3.6.1.4.1.5454.1.60.3.1.2
Maximum ATPC power
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rfATPCStepSize		1.3.6.1.4.1.5454.1.60.3.1.3
ATPC step size for each of the increment/decrement
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	Size(1..5)

txfreq		1.3.6.1.4.1.5454.1.60.3.2
OBJECT IDENTIFIER

rfTxFrequency		1.3.6.1.4.1.5454.1.60.3.2.1
Set/Display the current TX frequency
Status: current	Access: read-write
OBJECT-TYPE
	Opaque

rfTxFrequencyInt		1.3.6.1.4.1.5454.1.60.3.2.2
Set/Display the current TX frequency in integer
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rxfreq		1.3.6.1.4.1.5454.1.60.3.3
OBJECT IDENTIFIER

rfRxFrequency		1.3.6.1.4.1.5454.1.60.3.3.1
Display the current RX frequency
Status: current	Access: read-only
OBJECT-TYPE
	Opaque

rfRxFrequencyInt		1.3.6.1.4.1.5454.1.60.3.3.2
Display the current RX frequency in integer
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

speed		1.3.6.1.4.1.5454.1.60.3.4
OBJECT IDENTIFIER

rfSymrate		1.3.6.1.4.1.5454.1.60.3.4.1
Set/Display the current Symbol Rate
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rate8(2), rate12(3), rate17(4), rate26(5), rate35(6), rate43(7), rate49(8)

rfModulation		1.3.6.1.4.1.5454.1.60.3.4.2
Set/Display the current modulation
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	qpsk(0), q16q(1), q32q(2), q64q(3), q128q(4), q256q(5)

rfBPF		1.3.6.1.4.1.5454.1.60.3.4.3
Display the current bandpass filter value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfChannelWidth		1.3.6.1.4.1.5454.1.60.3.4.4
Display the current channel width
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	bw10(0), bw20(1), bw28(2), bw40(3), bw50(4), bw80(5)

power		1.3.6.1.4.1.5454.1.60.3.5
OBJECT IDENTIFIER

rfPower		1.3.6.1.4.1.5454.1.60.3.5.1
Set/Display the current power
Status: current	Access: read-write
OBJECT-TYPE
	Opaque

rfPowerInt		1.3.6.1.4.1.5454.1.60.3.5.2
Set/Display the current power in integer
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rfRSSILEDEnable		1.3.6.1.4.1.5454.1.60.3.6
Enable/Disable ODU LED display for RSSI
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

rfTemp		1.3.6.1.4.1.5454.1.60.3.7
Read current system Temperature
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

target		1.3.6.1.4.1.5454.1.60.3.8
OBJECT IDENTIFIER

rfTargetRSSI		1.3.6.1.4.1.5454.1.60.3.8.1
Set/Disable the current Target RSSI value in float value
Status: current	Access: read-write
OBJECT-TYPE
	Opaque

rfTargetRSSIInt		1.3.6.1.4.1.5454.1.60.3.8.2
Set/Disable the current Target RSSI value in integer
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rssi		1.3.6.1.4.1.5454.1.60.3.9
OBJECT IDENTIFIER

rfRSSI		1.3.6.1.4.1.5454.1.60.3.9.1
Read current RSSI value
Status: current	Access: read-only
OBJECT-TYPE
	Opaque

rfRSSIInt		1.3.6.1.4.1.5454.1.60.3.9.2
Read current RSSI value in Integer
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfPll		1.3.6.1.4.1.5454.1.60.3.10
OBJECT IDENTIFIER

rfRFMRFpll		1.3.6.1.4.1.5454.1.60.3.10.1
RFM RX PLL lock status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nolock(0), lock(1)

rfRFMIFpll		1.3.6.1.4.1.5454.1.60.3.10.2
RFM RX PLL lock status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nolock(0), lock(1)

rfTransmitPll		1.3.6.1.4.1.5454.1.60.3.10.3
Transmit PLL lock status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nolock(0), lock(1)

rfReceviedPll		1.3.6.1.4.1.5454.1.60.3.10.4
Loopback PLL lock status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nolock(0), lock(1)

rfIn		1.3.6.1.4.1.5454.1.60.3.11
OBJECT IDENTIFIER

rfInDataOctets		1.3.6.1.4.1.5454.1.60.3.11.1
Display total number of incoming Octets in FPGA
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rfInDataPackets		1.3.6.1.4.1.5454.1.60.3.11.2
Display total number of incoming Packets in FPGA
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rfInDropPackets		1.3.6.1.4.1.5454.1.60.3.11.3
Display total number of Ethernet drop packets goes in toFPGA
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rfInPortUtil		1.3.6.1.4.1.5454.1.60.3.11.4
Display current in port utilizaition percentage
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfInPortRate		1.3.6.1.4.1.5454.1.60.3.11.5
Display current in port rate
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfOut		1.3.6.1.4.1.5454.1.60.3.12
OBJECT IDENTIFIER

rfOutDataOctets		1.3.6.1.4.1.5454.1.60.3.12.1
Display total number of outgoing Octets in FPGA
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rfOutDataPackets		1.3.6.1.4.1.5454.1.60.3.12.2
Display total number of outgoing Packets in FPGA
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

rfOutPortUtil		1.3.6.1.4.1.5454.1.60.3.12.3
Display current out port utilizaition percentage
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfOutPortRate		1.3.6.1.4.1.5454.1.60.3.12.4
Display current out port rate
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor