TPLINK-ARP-DEFEND-MIB

File: TPLINK-ARP-DEFEND-MIB.mib (3179 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB TPLINK-ARP-INSPECTION-MIB

Imported symbols

OBJECT-TYPE ifIndex tplinkArpInspectionMIBObjects

Defined Types

TPARPDEFENDCONFIGENTRY  
SEQUENCE    
  tpArpDefendConfigPort OCTET STRING
  tpArpDefendConfigEnable INTEGER
  tpArpDefendConfigRate INTEGER
  tpArpDefendConfigState OCTET STRING
  tpArpDefendConfigPortLag OCTET STRING

Defined Values

tpArpDefend 1.3.6.1.4.1.11863.6.28.1.2
OBJECT IDENTIFIER    

tpArpDefendConfig 1.3.6.1.4.1.11863.6.28.1.2.1
OBJECT IDENTIFIER    

tpArpDefendConfigTable 1.3.6.1.4.1.11863.6.28.1.2.1.1
A list of arp defend config entries. Here you can configure the ARP Defend feature.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TPARPDEFENDCONFIGENTRY

tpArpDefendConfigEntry 1.3.6.1.4.1.11863.6.28.1.2.1.1.1
An entry contains of the information of arp defend attack config.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPARPDEFENDCONFIGENTRY  

tpArpDefendConfigPort 1.3.6.1.4.1.11863.6.28.1.2.1.1.1.1
port number
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tpArpDefendConfigEnable 1.3.6.1.4.1.11863.6.28.1.2.1.1.1.2
0. disable 1. enable Select Enable/Disable the ARP Defend feature for the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

tpArpDefendConfigRate 1.3.6.1.4.1.11863.6.28.1.2.1.1.1.3
specify the maximum amount of the received ARP packets per second.(10-100pps)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tpArpDefendConfigState 1.3.6.1.4.1.11863.6.28.1.2.1.1.1.4
the state of port, when the rate exceed, the port will discard the arp pkt.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

tpArpDefendConfigPortLag 1.3.6.1.4.1.11863.6.28.1.2.1.1.1.5
the lag the port belong to
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING