TIMETRA-SAS-PORT-MIB

File: TIMETRA-SAS-PORT-MIB.mib (58172 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-SAS-GLOBAL-MIB TIMETRA-TC-MIB TIMETRA-GLOBAL-MIB
TIMETRA-CHASSIS-MIB TIMETRA-PORT-MIB POWER-ETHERNET-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter32 IpAddress
Counter64 Integer32 Gauge32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TEXTUAL-CONVENTION DateAndTime RowStatus
TimeStamp TimeInterval TruthValue
MacAddress RowPointer DisplayString
timetraSASObjs timetraSASNotifyPrefix timetraSASConfs
timetraSASModules TmnxActionType TmnxPortID
ServObjDesc TItemDescription TNamedItemOrEmpty
TNamedItem TFCName TQueueId
TmnxServId TmnxOperState TPortSchedulerPIR
TPortSchedulerCIR TItemLongDescription TNetworkIngressMeterId
TmnxEncapVal timetraSRMIBModules tmnxHwObjs
tmnxHwNotification tmnxHwConformance tmnxChassisIndex
tmnxChassisNotifyChassisId TmnxAlarmState TmnxPortAdminStatus
TmnxMDAChanType tmnxPortEntry tmnxPortPortID
tmnxDS1Entry tmnxPortEtherEntry tmnxDS1PortEntry
tmnxPortNotifyPortId pethPsePortEntry pethPsePortIndex
pethPsePortPowerClassifications pethPsePortDetectionStatus

Defined Types

PortShgInfoEntry  
SEQUENCE    
  portShgName TNamedItem
  portShgRowStatus RowStatus
  portShgInstanceId Unsigned32
  portShgDescription ServObjDesc
  portShgLastMgmtChange TimeStamp

SasTmnxPortExtnEntry  
SEQUENCE    
  tmnxPortUplinkMode TruthValue
  tmnxPortAccessEgressQoSPolicyId Unsigned32
  tmnxPortNetworkQoSPolicyId Unsigned32
  tmnxPortShgName TNamedItemOrEmpty
  tmnxPortUseDei TruthValue
  tmnxPortOperGrpName TNamedItemOrEmpty
  tmnxPortMonitorOperGrpName TNamedItemOrEmpty

TmnxSASPortNetIngressStatsEntry  
SEQUENCE    
  tmnxSASPortNetIngressMeterIndex TNetworkIngressMeterId
  tmnxSASPortNetIngressFwdInProfPkts Counter64
  tmnxSASPortNetIngressFwdOutProfPkts Counter64
  tmnxSASPortNetIngressFwdInProfOcts Counter64
  tmnxSASPortNetIngressFwdOutProfOcts Counter64

SasTmnxPortEtherExtnEntry  
SEQUENCE    
  tmnxPortEtherEgressMaxBurst Integer32
  tmnxPortStatsQueue1PktsFwd TruthValue
  tmnxPortStatsQueue2PktsFwd TruthValue
  tmnxPortStatsQueue3PktsFwd TruthValue
  tmnxPortStatsQueue4PktsFwd TruthValue
  tmnxPortStatsQueue5PktsFwd TruthValue
  tmnxPortStatsQueue6PktsFwd TruthValue
  tmnxPortStatsQueue7PktsFwd TruthValue
  tmnxPortStatsQueue8PktsFwd TruthValue
  tmnxPortEtherEgrSchedMode INTEGER
  tmnxPortEtherLoopback INTEGER
  tmnxPortEtherIpMTU Unsigned32
  tmnxPortEtherClockConfig INTEGER
  tmnxPortLoopbckServId TmnxServId
  tmnxPortLoopbckSapPortId TmnxPortID
  tmnxPortLoopbckSapEncapVal TmnxEncapVal
  tmnxPortLoopbckSrcMacAddr MacAddress
  tmnxPortLoopbckDstMacAddr MacAddress
  tmnxPortAccEgrSapQosMarking INTEGER
  tmnxPortLldpTnlNrstBrdgeDstMac TruthValue
  tmnxPortEtherDe1OutProfile TruthValue
  tmnxPortEtherNwAggRateLimit INTEGER
  tmnxPortEtherNwAggRateLimitCir Integer32
  tmnxPortEtherNwAggRateLimitPir Integer32
  tmnxPortEtherDcommStatus TruthValue
  tmnxPortEtherMulticastIngress INTEGER

TmnxPortAccessEgressQueueStatsEntry  
SEQUENCE    
  tmnxPortAccessEgressQueueStatsIndex TQueueId
  tmnxPortAccessEgressQueueStatsFwdPkts Counter64
  tmnxPortAccessEgressQueueStatsFwdOcts Counter64
  tmnxPortAccessEgressQueueStatsDroPkts Counter64
  tmnxPortAccessEgressQueueStatsDroOcts Counter64

TmnxPortNetEgressQueueStatsEntry  
SEQUENCE    
  tmnxPortNetEgressQueueStatsIndex TQueueId
  tmnxPortNetEgressQueueStatsFwdPkts Counter64
  tmnxPortNetEgressQueueStatsFwdOcts Counter64
  tmnxPortNetEgressQueueStatsDroPkts Counter64
  tmnxPortNetEgressQueueStatsDroOcts Counter64
  tmnxPortNetEgressQueueStatsInProfDroPkts Counter64
  tmnxPortNetEgressQueueStatsInProfDroOcts Counter64
  tmnxPortNetEgressQueueStatsOutProfDroPkts Counter64
  tmnxPortNetEgressQueueStatsOutProfDroOcts Counter64

AluExtTmnxDS1PortEntry  
SEQUENCE    
  aluExtDS1PortLineImpedance INTEGER

AluPortAcrClkStatsEntry  
SEQUENCE    
  aluLastUpdateTime TimeStamp
  aluTotalMinutesIn24Hour Unsigned32
  aluCurrent24HourFreqOffsetMeanPpb Integer32
  aluCurrent24HourFreqOffsetStdDevPpb Unsigned32
  aluMaxShortIntervalMinutes Unsigned32
  aluTotalShortIntervalMinutes Unsigned32
  aluCurrent1MinValidData TruthValue
  aluCurrent1MinPhaseErrorMeanPpb Integer32
  aluCurrent1MinPhaseErrorStdDevNs Unsigned32
  aluCurrent1MinPhaseErrorMeanNs Integer32
  aluCurrent1MinFreqOffsetMeanPpb Integer32
  aluCurrent1MinFreqOffsetStdDevPpb Unsigned32

AluPortAcrClkStatsShortIntervalEntry  
SEQUENCE    
  aluIntervalNumber INTEGER
  aluIntervalValidData TruthValue
  aluIntervalUpdateTime TimeStamp
  aluIntervalPhaseErrorMeanPpb Integer32
  aluIntervalPhaseErrorStdDevNs Unsigned32
  aluIntervalPhaseErrorMeanNs Integer32
  aluIntervalFreqOffsetMeanPpb Integer32
  aluIntervalFreqOffsetStdDevPpb Unsigned32

AluExtTmnxDS1Entry  
SEQUENCE    
  aluExtDS1SignalBitsState OCTET STRING

AluExtPethPsePortEntry  
SEQUENCE    
  aluExtPethPsePortFaultReason INTEGER
  aluExtPethPsePortPowerLevel INTEGER
  aluExtPethPsePortOperStatus INTEGER

TmnxVirtualPortEntry  
SEQUENCE    
  tmnxVirtualPortPortID TmnxPortID
  tmnxVirtualPortInUse INTEGER
  tmnxVirtualPortSpeed INTEGER

Defined Values

tmnxSASPortMIBModule 1.3.6.1.4.1.6527.6.2.1.1.6
This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxSASPortObjs 1.3.6.1.4.1.6527.6.2.2.2.2
OBJECT IDENTIFIER    

tmnxSASPortNotificationObjects 1.3.6.1.4.1.6527.6.2.2.2.3
OBJECT IDENTIFIER    

tmnxSASPortStatsObjs 1.3.6.1.4.1.6527.6.2.2.2.4
OBJECT IDENTIFIER    

tmnxSASPortConformance 1.3.6.1.4.1.6527.6.2.2.1.2
OBJECT IDENTIFIER    

portShgInfoTable 1.3.6.1.4.1.6527.6.2.2.2.2.6
A table that contains port split-horizon group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortShgInfoEntry

portShgInfoEntry 1.3.6.1.4.1.6527.6.2.2.2.2.6.1
Split-horizon group information about a TLS service.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortShgInfoEntry  

portShgName 1.3.6.1.4.1.6527.6.2.2.2.2.6.1.1
The value of the object portShgName specifies the name of the split-horizon group.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

portShgRowStatus 1.3.6.1.4.1.6527.6.2.2.2.2.6.1.2
The value of the object portShgRowStatus specifies the status of this row. The only values supported during a set operation are createAndGo(4) and destroy(6). To delete an entry from this table, there should be no port Bindings refering to it.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

portShgInstanceId 1.3.6.1.4.1.6527.6.2.2.2.2.6.1.3
The value of the object portShgInstanceId indicates the instance identifier for the split horizon group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

portShgDescription 1.3.6.1.4.1.6527.6.2.2.2.2.6.1.4
The value of the object portShgDescription specifies generic information about this split-horizon group.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjDesc  

portShgLastMgmtChange 1.3.6.1.4.1.6527.6.2.2.2.2.6.1.5
The value of the object portShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sasTmnxPortExtnTable 1.3.6.1.4.1.6527.6.2.2.2.2.2
This table has additional information about the 7210 platforms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SasTmnxPortExtnEntry

sasTmnxPortExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.2.2.1
Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported 'tmnxPortEntries' must be in the proper state for removal.
Status: current Access: not-accessible
OBJECT-TYPE    
  SasTmnxPortExtnEntry  

tmnxPortUplinkMode 1.3.6.1.4.1.6527.6.2.2.2.2.2.1.1
If the tmnxPortUplinkMode is set to true when the tmnxPortMode is set to 'access(1)' and the port acts as an uplink. 'tmnxPortEncaptype' must also be configured 'qinqEncap' when using access port as uplink port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortAccessEgressQoSPolicyId 1.3.6.1.4.1.6527.6.2.2.2.2.2.1.2
Qos Policy ID for Access Egress Port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

tmnxPortNetworkQoSPolicyId 1.3.6.1.4.1.6527.6.2.2.2.2.2.1.3
Port Network Policy ID
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

tmnxPortShgName 1.3.6.1.4.1.6527.6.2.2.2.2.2.1.4
Split horizon group to be attached to this port
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortUseDei 1.3.6.1.4.1.6527.6.2.2.2.2.2.1.5
Enable/disable DEI based policing.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortOperGrpName 1.3.6.1.4.1.6527.6.2.2.2.2.2.1.6
System oper group to be attached to this port
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxPortMonitorOperGrpName 1.3.6.1.4.1.6527.6.2.2.2.2.2.1.7
System monitor oper group to be attached to this port
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxSASPortNetIngressStatsTable 1.3.6.1.4.1.6527.6.2.2.2.2.3
Defines the Alcatel SAS series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical Meters being used for the ports to forward the network ingress traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxSASPortNetIngressStatsEntry

tmnxSASPortNetIngressStatsEntry 1.3.6.1.4.1.6527.6.2.2.2.2.3.1
Defines an entry in tmnxSASPortNetIngressStatsTable. Entries are created and deleted by the system depending on the meter policy being used at the specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxSASPortNetIngressStatsEntry  

tmnxSASPortNetIngressMeterIndex 1.3.6.1.4.1.6527.6.2.2.2.2.3.1.1
'tmnxSASPortNetIngressQueueIndex' serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress meter for the specified port in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressMeterId  

tmnxSASPortNetIngressFwdInProfPkts 1.3.6.1.4.1.6527.6.2.2.2.2.3.1.2
tmnxSASPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this meter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxSASPortNetIngressFwdOutProfPkts 1.3.6.1.4.1.6527.6.2.2.2.2.3.1.3
tmnxSASPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this meter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxSASPortNetIngressFwdInProfOcts 1.3.6.1.4.1.6527.6.2.2.2.2.3.1.4
tmnxSASPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this meter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxSASPortNetIngressFwdOutProfOcts 1.3.6.1.4.1.6527.6.2.2.2.2.3.1.5
tmnxSASPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this meter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sasTmnxPortEtherExtnTable 1.3.6.1.4.1.6527.6.2.2.2.2.4
This table has additional information about the 7210 platforms
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SasTmnxPortEtherExtnEntry

sasTmnxPortEtherExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.2.4.1
Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM 'cardEntry' can be deleted from the tmnxMDATable, its supported 'tmnxPortEntries' and 'tmnxPortEtherEntries' must be in the proper state for removal. The tmnxPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType.
Status: current Access: not-accessible
OBJECT-TYPE    
  SasTmnxPortEtherExtnEntry  

tmnxPortEtherEgressMaxBurst 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.1
Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 32..16384  

tmnxPortStatsQueue1PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.2
If tmnxPortStatsQueue1PktsFwd is set to 'true', count the egress packets with forwarding class value '0'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortStatsQueue2PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.3
If tmnxPortStatsQueue2PktsFwd is set to 'true', count the egress packets with forwarding class value '1'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortStatsQueue3PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.4
If tmnxPortStatsQueue3PktsFwd is set to 'true', count the egress packets with forwarding class value '2'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortStatsQueue4PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.5
If tmnxPortStatsQueue4PktsFwd is set to 'true', count the egress packets with forwarding class value '3'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortStatsQueue5PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.6
If tmnxPortStatsQueue5PktsFwd is set to 'true', count the egress packets with forwarding class value '5'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortStatsQueue6PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.7
If tmnxPortStatsQueue6PktsFwd is set to 'true', count the egress packets with forwarding class value '6'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortStatsQueue7PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.8
If tmnxPortStatsQueue7PktsFwd is set to 'true', count the egress packets with forwarding class value '7'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortStatsQueue8PktsFwd 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.9
If tmnxPortStatsQueue8PktsFwd is set to 'true', count the egress packets with forwarding class value '8'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortEtherEgrSchedMode 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.10
tmnxPortEtherEgrSchedMode sets the SAP egress scheduler mode. In 'fc-based' mode the prority of all the egress queues across all the SAPs are considered to determine the next queue to schedule. In 'sap-based' mode the scheduler uses the priority of all the egress queues in a SAP to determine the next queue to schedule and uses round-robin scheduling mechanism to schedule each of the SAP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fc-based(1), sap-based(2)  

tmnxPortEtherLoopback 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.11
If tmnxPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), internal(2)  

tmnxPortEtherIpMTU 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.12
tmnxPortEtherIpMTU is the IP MTU for interfaces using this port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 512..9000  

tmnxPortEtherClockConfig 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.13
When the value of tmnxPortEtherClockConfig is 'automatic' the Ethernet interface will automatically negotiate clock mastership along with other link parameters with the far end. Depending upon the capabilities of the two ends, one will be master the other will be slave for clocking. When the value of tmnxPortEtherClockConfig is 'manual-master', the Ethernet interface will negotiate other link parameters with the far end except clock mastership. It assumes clock mastership and want the other end to be slave. When the value is 'manual-slave' this ethernet interface chooses to be slave and wants the far end to assume clock mastership. For 10 baseT and 100 baseT ethernet interfaces, value of this variable should be 'none', as this will not be applicable for those interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(0), automatic(1), manual-master(2), manual-slave(3)  

tmnxPortLoopbckServId 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.14
Loopback Service Id
Status: current Access: read-write
OBJECT-TYPE    
  TmnxServId  

tmnxPortLoopbckSapPortId 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.15
Loopback Sap Port Id
Status: current Access: read-write
OBJECT-TYPE    
  TmnxPortID  

tmnxPortLoopbckSapEncapVal 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.16
Loopback Sap Encapsulation
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEncapVal  

tmnxPortLoopbckSrcMacAddr 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.17
Loopback Source Mac Address
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

tmnxPortLoopbckDstMacAddr 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.18
Loopback Destination Mac Address
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

tmnxPortAccEgrSapQosMarking 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.19
Port Ethernet Access Egress Sap Qos Marking
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tmnxPortLldpTnlNrstBrdgeDstMac 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.20
If tmnxPortLldpTnlNrstBrdgeDstMac is set to 'true' and admin status is disabled lldp pkts will be tunnelled
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortEtherDe1OutProfile 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.22
The value of tmnxPortEtherDe1OutProfile if enabled will consider the value of the DEI(CFI) bit of the incoming packet , which if 1 will result in the packet being classified as out-profile and in-profile otherwise
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxPortEtherNwAggRateLimit 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.23
The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic on a hybrid port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -1 | 1..100000000  

tmnxPortEtherNwAggRateLimitCir 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.28
The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic cir rate on a hybrid port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10000000  

tmnxPortEtherNwAggRateLimitPir 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.29
The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic cir rate on a hybrid port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..10000000  

tmnxPortEtherDcommStatus 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.30
The value of tmnxPortEtherDcommStatus is true if this port is decommissioned
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPortEtherMulticastIngress 1.3.6.1.4.1.6527.6.2.2.2.2.4.1.31
Defines multicast ingress lookup type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER l2-mc(1), ip-mc(2)  

tmnxPortAccessEgressQueueStatsTable 1.3.6.1.4.1.6527.6.2.2.2.2.7
Defines the Alcatel SAS series access port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the access egress traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortAccessEgressQueueStatsEntry

tmnxPortAccessEgressQueueStatsEntry 1.3.6.1.4.1.6527.6.2.2.2.2.7.1
Defines an entry in tmnxPortAccessEgressQueueStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortAccessEgressQueueStatsEntry  

tmnxPortAccessEgressQueueStatsIndex 1.3.6.1.4.1.6527.6.2.2.2.2.7.1.1
'tmnxPortAccessEgressQueueIndex' serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a access egress queue for the specified port in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQueueId 1..8  

tmnxPortAccessEgressQueueStatsFwdPkts 1.3.6.1.4.1.6527.6.2.2.2.2.7.1.2
tmnxPortAccessEgressQueueStatsFwdPkts indicates the number of forwarded access egress packets forwarded on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortAccessEgressQueueStatsFwdOcts 1.3.6.1.4.1.6527.6.2.2.2.2.7.1.3
tmnxPortAccessEgressQueueStatsFwdOcts indicates the number of forward access egress octets forwarded on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortAccessEgressQueueStatsDroPkts 1.3.6.1.4.1.6527.6.2.2.2.2.7.1.4
tmnxPortAccessEgressQueueStatsDroPkts indicates the number of dropped access egress packets on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortAccessEgressQueueStatsDroOcts 1.3.6.1.4.1.6527.6.2.2.2.2.7.1.5
tmnxPortAccessEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsTable 1.3.6.1.4.1.6527.6.2.2.2.2.8
Defines the Alcatel SAS series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPortNetEgressQueueStatsEntry

tmnxPortNetEgressQueueStatsEntry 1.3.6.1.4.1.6527.6.2.2.2.2.8.1
Defines an entry in tmnxPortNetEgressQueueStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortNetEgressQueueStatsEntry  

tmnxPortNetEgressQueueStatsIndex 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.1
tmnxPortNetEgressQueueStatsIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQueueId 1..8  

tmnxPortNetEgressQueueStatsFwdPkts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.2
tmnxPortNetEgressQueueStatsFwdPkts indicates the number of forwarded network egress packets on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsFwdOcts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.3
tmnxPortNetEgressQueueStatsFwdOcts indicates the number of forwarded network egress octets on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsDroPkts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.4
tmnxPortNetEgressQueueStatsDroPkts indicates the number of dropped network egress packets on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsDroOcts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.5
tmnxPortNetEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsInProfDroPkts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.6
tmnxPortNetEgressQueueStatsInProfDroPkts indicates the number of dropped network egress octets on this port using this in-profile queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsInProfDroOcts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.7
tmnxPortNetEgressQueueStatsInProfDroOcts indicates the number of dropped network egress octets on this port using this in-profile queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsOutProfDroPkts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.8
tmnxPortNetEgressQueueStatsOutProfDroPkts indicates the number of dropped network egress octets on this port using this out-profile queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPortNetEgressQueueStatsOutProfDroOcts 1.3.6.1.4.1.6527.6.2.2.2.2.8.1.9
tmnxPortNetEgressQueueStatsOutProfDroOcts indicates the number of dropped network egress octets on this port using this out-profile queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

aluExtTmnxDS1PortTable 1.3.6.1.4.1.6527.6.2.2.2.2.9
The aluExtTmnxDS1PortTable has an entry for a DS1 physical port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AluExtTmnxDS1PortEntry

aluExtTmnxDS1PortEntry 1.3.6.1.4.1.6527.6.2.2.2.2.9.1
Each row entry represents extended functionality of a physical DS1 port on Alcatel-Lucent 7210 SAS devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxDS1PortTable are created or deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  AluExtTmnxDS1PortEntry  

aluExtDS1PortLineImpedance 1.3.6.1.4.1.6527.6.2.2.2.2.9.1.1
The value of aluExtDS1PortLineImpedance indicates the current line impedance set on the physical T1/E1 port. T1 Ports may only be configured to have an impedance of 100 Ohms. E1 Ports may be configured to have an impledance of either 75 or 120 Ohms where the default impedance is 120 Ohms.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(0), impedance75Ohms(1), impedance100Ohms(2), impedance120Ohms(3)  

aluPortAcrClkStatsTable 1.3.6.1.4.1.6527.6.2.2.2.2.10
Defines the Alcatel-Lucent SAR series port adaptive clock recovery (ACR) statistics table for providing, via SNMP, the capability of retrieving statistical information relating to clock that is derived from the ACR CPIPE PW.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AluPortAcrClkStatsEntry

aluPortAcrClkStatsEntry 1.3.6.1.4.1.6527.6.2.2.2.2.10.1
Defines an entry in aluPortAcrClkStatsTable. Entries are created and deleted by the system depending port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  AluPortAcrClkStatsEntry  

aluLastUpdateTime 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.1
The last time the ACR statistics were updated
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

aluTotalMinutesIn24Hour 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.2
The number of minutes in alu24HourFreqOffsetMeanPpb and alu24HourFreqOffsetStdDevPpb
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluCurrent24HourFreqOffsetMeanPpb 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.3
aluCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset from the local oscillator clock in parts per billion for up to the last 24 hour.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aluCurrent24HourFreqOffsetStdDevPpb 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.4
aluCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the frequency offset from the local oscillator clock in parts per billion for up to the last 24 hour.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluMaxShortIntervalMinutes 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.5
'aluMaxShortIntervalMinutes' the maximum number of 'aluStatsShortIntervalIndexes'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluTotalShortIntervalMinutes 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.6
'aluTotalShortIntervalMinutes' is the number of 'aluStatsShortIntervalIndexes' that have valid statistics
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluCurrent1MinValidData 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.7
This variable indicates if the data for the first interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

aluCurrent1MinPhaseErrorMeanPpb 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.8
The mean phase error from the local oscillator clock in parts per billion during the first interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aluCurrent1MinPhaseErrorStdDevNs 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.9
The standard deviation of the phase error from the local oscillator clock in nano seconds during the first interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluCurrent1MinPhaseErrorMeanNs 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.10
The mean of the phase error from the local oscillator clock in nano seconds during the first interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aluCurrent1MinFreqOffsetMeanPpb 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.11
The mean frequency offset from the local oscillator clock in parts per billion during the first interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aluCurrent1MinFreqOffsetStdDevPpb 1.3.6.1.4.1.6527.6.2.2.2.2.10.1.12
The standard deviation of the frequency offset from the local oscillator clock in nano seconds during the first interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluPortAcrClkStatsShortIntervalTable 1.3.6.1.4.1.6527.6.2.2.2.2.11
The Port ACR Clock Interval Table contains various statistics collected by each adaptively timed port over the previous 15 minutes. The past 15 minutes are broken into 15 1 minute intervals. Each row in this table represents one such interval (identified by aluAcrClkIntervalNumber).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AluPortAcrClkStatsShortIntervalEntry

aluPortAcrClkStatsShortIntervalEntry 1.3.6.1.4.1.6527.6.2.2.2.2.11.1
An entry in the Port ACR Clock Interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AluPortAcrClkStatsShortIntervalEntry  

aluIntervalNumber 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.1
A number between 1 and 15, where 1 is the most recently completed 1 minute interval and 15 is the 1 minutes interval completed 14 minutes prior to interval 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

aluIntervalValidData 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.2
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

aluIntervalUpdateTime 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.3
The update time of the ACR interval statistics
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

aluIntervalPhaseErrorMeanPpb 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.4
The mean phase error from the local oscillator clock in parts per billion during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aluIntervalPhaseErrorStdDevNs 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.5
The standard deviation of the phase error from the local oscillator clock in nano seconds during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluIntervalPhaseErrorMeanNs 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.6
The mean of the phase error from the local oscillator clock in nano seconds during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aluIntervalFreqOffsetMeanPpb 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.7
The mean frequency offset from the local oscillator clock in parts per billion during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aluIntervalFreqOffsetStdDevPpb 1.3.6.1.4.1.6527.6.2.2.2.2.11.1.8
The standard deviation of the frequency offset from the local oscillator clock in nano seconds during the interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

aluExtTmnxDS1Table 1.3.6.1.4.1.6527.6.2.2.2.2.12
The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AluExtTmnxDS1Entry

aluExtTmnxDS1Entry 1.3.6.1.4.1.6527.6.2.2.2.2.12.1
Each row entry represents extended functionality of a DS1 physical port or channel on Alcatel-Lucent 7210 SAS devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxDS1Table are created or deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  AluExtTmnxDS1Entry  

aluExtDS1SignalBitsState 1.3.6.1.4.1.6527.6.2.2.2.2.12.1.3
aluExtDS1SignalBitsState is an array of bytes used to indicate the current state of the ABCD signalling bits for all timeslots of a DS1/E1. The first half of the array or the 32 most significant bytes describe the RX ABCD bits. The other half describes the TX ABCD bits. In each half of the array, every byte represents a particular timeslot. The most significant byte represents timeslot 1. The least significant byte represents timeslot 32. The byte arrangement is as follows: array index: | 0 1 ... 30 31 | 32 33 ... 62 63 | timeslot: | 1 2 ... 31 32 | 1 2 ... 31 32 | | <---- RX -----> | <---- TX -----> | Each byte carries ABCD bits in the least significant nibble. The byte's most significant bit indicates the validity of the ABCD bits. The bit arrangement is as follows: bit pos: | 7 6 5 4 3 2 1 0 | | V x x x A B C D | 'V' - validity (0 = invalid, 1 = valid) 'x' - don't care ABCD bits are marked invalid for a variety of situations (eg. tmnxDS1SignalMode not configured for CAS, timeslot(s) not configured as part of a channel-group, DS1/E1 status not up, etc.). For CAS DS1 SF, only the AB signalling bits are supported. The remaining 2 least significant bits in the nibble are undefined.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(64)  

aluExtPethPsePortTable 1.3.6.1.4.1.6527.6.2.2.2.2.13
The aluExtPethPsePortTable has an entry for a table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AluExtPethPsePortEntry

aluExtPethPsePortEntry 1.3.6.1.4.1.6527.6.2.2.2.2.13.1
Each row entry represents the extended functionality of a power Ethernet port
Status: current Access: not-accessible
OBJECT-TYPE    
  AluExtPethPsePortEntry  

aluExtPethPsePortFaultReason 1.3.6.1.4.1.6527.6.2.2.2.2.13.1.1
Reason for a detection status failure: none (1) dcp (2) - Positive DC supply connected at the port hicap (3) - High Capacitance at the port rlow (4) - Low Resistance at the port detok (5) - detection ok rhigh (6) - High resistance at the port open (7) - open circuit dcn (8) - Low impedence to Vee at the port tstart (9) - Startup failure at the port icv (10) - Current limit disconnect timeout at the port tcut (11) - Overcurrent and current limit violation at the port dis (12) - DC load disconnect sup (13) - Supply fault at the PSE device pdeny (14) - Power Denied
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), dcp(2), hicap(3), rlow(4), detok(5), rhigh(6), open(7), dcn(8), tstart(9), icv(10), tcut(11), dis(12), sup(13), pdeny(14)  

aluExtPethPsePortPowerLevel 1.3.6.1.4.1.6527.6.2.2.2.2.13.1.2
none (1) The interface does not provide the PoE function. standard (2) The interface provides the standard PoE power level. plus (3) The interface provides the higher power 'Poe Plus' PSE function
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), standard(2), plus(3)  

aluExtPethPsePortOperStatus 1.3.6.1.4.1.6527.6.2.2.2.2.13.1.3
The operational status of the port PSE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(1), on(2), off(3)  

pethPsePortEventInfo 1.3.6.1.4.1.6527.6.2.2.2.2.14
The operational status of the port PSE.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

tmnxVirtualPortTable 1.3.6.1.4.1.6527.6.2.2.2.2.15
The port table has an entry for each virtual port
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxVirtualPortEntry

tmnxVirtualPortEntry 1.3.6.1.4.1.6527.6.2.2.2.2.15.1
Each row entry represents a virtual port
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVirtualPortEntry  

tmnxVirtualPortPortID 1.3.6.1.4.1.6527.6.2.2.2.2.15.1.1
tmnxVirtualPortPortID is an index into this table
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

tmnxVirtualPortInUse 1.3.6.1.4.1.6527.6.2.2.2.2.15.1.2
tmnxVirtualPortInUse describes whether the virtual port is used by an application or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-in-use(1), mirror(2), macswap(3), testhead(4)  

tmnxVirtualPortSpeed 1.3.6.1.4.1.6527.6.2.2.2.2.15.1.3
tmnxVirtualPortSpeed describes the speed of the virtual ports.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER one-gig(1), ten-gig(2)  

aluExtPethPsePortStatusChange 1.3.6.1.4.1.6527.6.2.2.2.3.1
Generated when there is a change in Power Classification, Detection Status, Fault Reason, or Oper Status on a PoE port.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxSASPortCompliances 1.3.6.1.4.1.6527.6.2.2.1.2.1
OBJECT IDENTIFIER    

tmnxSASPortGroups 1.3.6.1.4.1.6527.6.2.2.1.2.2
OBJECT IDENTIFIER    

tmnxSASPortV1v0Group 1.3.6.1.4.1.6527.6.2.2.1.2.2.1
sas group object definition
Status: current Access: read-only
OBJECT-GROUP    

tmnxSASPortV1v1Group 1.3.6.1.4.1.6527.6.2.2.1.2.2.2
sas group object definition
Status: current Access: read-only
OBJECT-GROUP    

tmnxSASPortV2v0Group 1.3.6.1.4.1.6527.6.2.2.1.2.2.3
SAS group object definitions for 2.0 release
Status: current Access: read-only
OBJECT-GROUP    

tmnxSASPortV3v0Group 1.3.6.1.4.1.6527.6.2.2.1.2.2.6
SAS group object definitions for 3.0 release
Status: current Access: read-only
OBJECT-GROUP    

aluPortAcrClkStatsGroup 1.3.6.1.4.1.6527.6.2.2.1.2.2.4
The group of objects supporting retrieval of the ACR clock statistic on Alcatel-Lucent SAR series systems
Status: current Access: read-only
OBJECT-GROUP    

tmnxSASPortV4v0Group 1.3.6.1.4.1.6527.6.2.2.1.2.2.5
sas group object definition
Status: current Access: read-only
OBJECT-GROUP    

tmnxSASPortV5v0Group 1.3.6.1.4.1.6527.6.2.2.1.2.2.7
sas 5.0 release, group object definition
Status: current Access: read-only
OBJECT-GROUP    

tmnxSASPortV6v0Group 1.3.6.1.4.1.6527.6.2.2.1.2.2.8
sas 6.0 release, group object definition
Status: current Access: read-only
OBJECT-GROUP