TIMETRA-SAS-OAM-TEST-MIB

File: TIMETRA-SAS-OAM-TEST-MIB.mib (54798 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
SNMP-FRAMEWORK-MIB	INET-ADDRESS-MIB	IF-MIB
TIMETRA-TC-MIB	TIMETRA-GLOBAL-MIB	TIMETRA-SAS-GLOBAL-MIB
TIMETRA-SERV-MIB	TIMETRA-SAP-MIB	TIMETRA-SAS-QOS-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
IpAddress	Integer32	Unsigned32
Gauge32	Counter32	Counter64
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TEXTUAL-CONVENTION	RowStatus	StorageType
TruthValue	DateAndTime	MacAddress
TimeStamp	DisplayString	SnmpAdminString
InetAddressType	InetAddress	InetAddressPrefixLength
InterfaceIndex	InterfaceIndexOrZero	IpAddressPrefixLength
SdpBindId	TFCName	TItemDescription
TLNamedItemOrEmpty	TNamedItemOrEmpty	TPolicyStatementNameOrEmpty
TProfile	TmnxAdminState	TmnxBgpRouteTarget
TmnxEncapVal	TmnxPortID	TmnxPwGlobalIdOrZero
TmnxServId	TmnxSpokeSdpIdOrZero	TmnxStrSapId
TmnxTunnelID	TmnxTunnelType	TmnxVPNRouteDistinguisher
TmnxVRtrID	TmnxVcId	TmnxVcIdOrNone
TmnxVcType	TDSCPNameOrEmpty	TNamedItem
Dot1PPriority	timetraSRMIBModules	tmnxSRObjs
tmnxSRNotifyPrefix	tmnxSRConfs	timetraSASObjs
timetraSASNotifyPrefix	timetraSASConfs	timetraSASModules
InetAddressIPv6	svcId	sapPortId
sapEncapValue	TAdaptationRule

Defined Types

TTestHdCIRRate
The rate to be used in kbps.
TEXTUAL-CONVENTION
	INTEGER	0..1000000

TTestHdPIRRate
The rate to be used in kbps. The value -1 means pir rate not used.
TEXTUAL-CONVENTION
	INTEGER	-1 \| 0..1000000

TmnxTestHdProfEntry
SEQUENCE
	tmnxTestHdProfIndex	INTEGER
	tmnxTestHdProfRowStatus	RowStatus
	tmnxTestHdProfDescription	TItemDescription
	tmnxTestHdProfCIRAdaptation	TAdaptationRule
	tmnxTestHdProfOperCIR	TTestHdCIRRate
	tmnxTestHdProfCIR	TTestHdCIRRate
	tmnxTestHdProfDurHr	Integer32
	tmnxTestHdProfDurMin	Integer32
	tmnxTestHdProfDurSec	Integer32
	tmnxTestHdProfFrameSize	INTEGER
	tmnxTestHdProfTrapEnable	TruthValue
	tmnxTestHdLastChanged	TimeStamp
	tmnxTestHdProfAdminCIR	TTestHdCIRRate
	tmnxTestHdProfAdminPIR	TTestHdPIRRate
	tmnxTestHdProfOperPIR	TTestHdPIRRate
	tmnxTestHdProfDot1pIn	Dot1PPriority
	tmnxTestHdProfDot1pOut	Dot1PPriority
	tmnxTestHdProfActiveTests	OCTET STRING
	tmnxTestHdProfCompetedTests	OCTET STRING

TmnxTestHdPayLdEntry
SEQUENCE
	tmnxTestHdPayLdIndex	INTEGER
	tmnxTestHdPayLdRowStatus	RowStatus
	tmnxTestHdPayLdDesc	TItemDescription
	tmnxTestHdPayLddataPattrn	OCTET STRING
	tmnxTestHdPayLdSrcIpv4Addr	IpAddress
	tmnxTestHdPayLdDstIpv4Addr	IpAddress
	tmnxTestHdPayLdDSCP	TDSCPNameOrEmpty
	tmnxTestHdPayLdIpProto	INTEGER
	tmnxTestHdPayLdIpTos	INTEGER
	tmnxTestHdPayLdIpTTL	INTEGER
	tmnxTestHdPayLdSrcMac	MacAddress
	tmnxTestHdPayLdDstMac	MacAddress
	tmnxTestHdPayLdSrcPort	INTEGER
	tmnxTestHdPayLdDstPort	INTEGER
	tmnxTestHdPayLdLastChanged	TimeStamp
	tmnxTestHdPayLdType	INTEGER
	tmnxTestHdPayLdVTagOne	Integer32
	tmnxTestHdPayLdVTagOneTpid	Unsigned32
	tmnxTestHdPayLdVTagOneDot1p	Dot1PPriority
	tmnxTestHdPayLdVTagTwo	Integer32
	tmnxTestHdPayLdVTagTwoTpid	Unsigned32
	tmnxTestHdPayLdVTagTwoDot1p	Dot1PPriority
	tmnxTestHdPayLdEthertype	Unsigned32

TmnxTestHdAccCritEntry
SEQUENCE
	tmnxTestHdAccCritIndex	INTEGER
	tmnxTestHdAccCritRowStatus	RowStatus
	tmnxTestHdAccCritJittrRiseThres	INTEGER
	tmnxTestHdAccCritLatRiseThres	INTEGER
	tmnxTestHdAccCritLossRiseThres	INTEGER
	tmnxTestHdAccCritLastChanged	TimeStamp
	tmnxTestHdAccCritLossRiseThresIn	INTEGER
	tmnxTestHdAccCritLossRiseThresOut	INTEGER
	tmnxTestHdAccCritCirThres	INTEGER
	tmnxTestHdAccCritPirThres	INTEGER
	tmnxTestHdAccCritLatRiseThresIn	INTEGER
	tmnxTestHdAccCritLatRiseThresOut	INTEGER
	tmnxTestHdAccCritJittrRiseThresIn	INTEGER
	tmnxTestHdAccCritJittrRiseThresOut	INTEGER

TmnxTestHdSessEntry
SEQUENCE
	tmnxTestHdSessOwnerName	SnmpAdminString
	tmnxTestHdSessTestName	SnmpAdminString
	tmnxTestHdSessStartTime	DateAndTime
	tmnxTestHdSessCompletedTime	DateAndTime
	tmnxTestHdSessTotalTime	INTEGER
	tmnxTestHdSessFc	TFCName
	tmnxTestHdSessCompleted	TruthValue
	tmnxTestHdSessStopped	TruthValue
	tmnxTestHdSessProfId	INTEGER
	tmnxTestHdSessPayLdId	INTEGER
	tmnxTestHdSessAccCritId	INTEGER
	tmnxTestHdSessSapPortId	TmnxPortID
	tmnxTestHdSessSapEncapValue	TmnxEncapVal
	tmnxTestHdSessTransCount	Counter64
	tmnxTestHdSessRecvCount	Counter64
	tmnxTestHdSessMinLatency	Counter64
	tmnxTestHdSessMaxLatency	Counter64
	tmnxTestHdSessMeasuredLatency	Counter64
	tmnxTestHdSessMeasuredJitter	INTEGER

TmnxTestHdResultsEntry
SEQUENCE
	tmnxTestHdOwnerName	SnmpAdminString
	tmnxTestHdTestName	SnmpAdminString
	tmnxTestHdResProfId	INTEGER
	tmnxTestHdResProfPayLdId	INTEGER
	tmnxTestHdResProfAccCritId	INTEGER
	tmnxTestHdResTransCount	Counter64
	tmnxTestHdResRecvCount	Counter64
	tmnxTestHdResMeasuredThruput	INTEGER
	tmnxTestHdResMeasuredFLR	INTEGER
	tmnxTestHdResMeasuredLatency	Counter64
	tmnxTestHdResLatencyAccptanceResult	INTEGER
	tmnxTestHdResMeasuredJitter	INTEGER
	tmnxTestHdResJitterAccptanceResult	INTEGER
	tmnxTestHdResSapPortId	TmnxPortID
	tmnxTestHdResSapEncapValue	TmnxEncapVal
	tmnxTestHdResFLRAccptanceResult	INTEGER
	tmnxTestHdResMinLatency	Counter64
	tmnxTestHdResMaxLatency	Counter64

Defined Values

timetraSASOamTestMIBModule		1.3.6.1.4.1.6527.6.2.1.1.18
This document is the SNMP MIB module to manage and provision the Alcatel-Lucent SROS OAM tests. Copyright 2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY

tmnxSASOamTestObjs		1.3.6.1.4.1.6527.6.2.2.2.17
OBJECT IDENTIFIER

tmnxTestHdProfObjects		1.3.6.1.4.1.6527.6.2.2.2.17.1
OBJECT IDENTIFIER

tmnxTestHdProfNotifyObjs		1.3.6.1.4.1.6527.6.2.2.2.17.2
OBJECT IDENTIFIER

tmnxSASOamNotifyPrefix		1.3.6.1.4.1.6527.6.2.2.3.3
OBJECT IDENTIFIER

tmnxSASOamNotifications		1.3.6.1.4.1.6527.6.2.2.3.3.1
OBJECT IDENTIFIER

tmnxSASOamTestConformance		1.3.6.1.4.1.6527.6.2.2.1.17
OBJECT IDENTIFIER

tmnxTestHdProfConformance		1.3.6.1.4.1.6527.6.2.2.1.17.1
OBJECT IDENTIFIER

tmnxTestHdObjsGroups		1.3.6.1.4.1.6527.6.2.2.1.17.1.1
OBJECT IDENTIFIER

tmnxTestHdProfTable		1.3.6.1.4.1.6527.6.2.2.2.17.1.1

Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxTestHdProfEntry

tmnxTestHdProfEntry		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxTestHdProfEntry

tmnxTestHdProfIndex		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.1
tmnxTestHdProfIndex profile index for this entry
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	0..10

tmnxTestHdProfRowStatus		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.2
RowStatus for this entry
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

tmnxTestHdProfDescription		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.3
user description for this profile
Status: current	Access: read-create
OBJECT-TYPE
	TItemDescription

tmnxTestHdProfCIRAdaptation		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.4
cir rule to be used in the test head test
Status: current	Access: read-create
OBJECT-TYPE
	TAdaptationRule

tmnxTestHdProfOperCIR		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.5
oper cir used in the payload
Status: current	Access: read-only
OBJECT-TYPE
	TTestHdCIRRate

tmnxTestHdProfCIR		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.6
cir to be used in the payload, this object is supported for backward compatibility of 7210 devices using 5.0R4, tmnxTestHdProfOperCIR and tmnxTestHdProfAdminCIR to be used in 6.0 nodes
Status: deprecated	Access: read-create
OBJECT-TYPE
	TTestHdCIRRate

tmnxTestHdProfDurHr		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.8
tmnxTestHdProfDurHr is the number of hours the test head test to be run
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..24

tmnxTestHdProfDurMin		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.9
tmnxTestHdProfDurMin is the number of minutes the test head test to be run
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..60

tmnxTestHdProfDurSec		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.10
tmnxTestHdProfDurSec is the number of seconds the test head test to be run
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..60

tmnxTestHdProfFrameSize		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.11
tmnxTestHdProfFrameSize is the frame size to be used in frame payload
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	64..9212

tmnxTestHdProfTrapEnable		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.13
tmnxTestHdProfTrapEnable when set to true tmnxOamTestHeadTestCompleted trap will be sent when the test run completes.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

tmnxTestHdLastChanged		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.14
The value tmnxTestHdLastChanged indicates the system uptime when an entry in tmnxTestHdProfTable was last changed.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxTestHdProfAdminCIR		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.15
admin cir to be used in the payload
Status: current	Access: read-create
OBJECT-TYPE
	TTestHdCIRRate

tmnxTestHdProfAdminPIR		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.16
admin pir to be used in the payload
Status: current	Access: read-create
OBJECT-TYPE
	TTestHdPIRRate

tmnxTestHdProfOperPIR		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.17
oper pir used in the payload
Status: current	Access: read-only
OBJECT-TYPE
	TTestHdPIRRate

tmnxTestHdProfDot1pIn		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.18
dot1p-in value to for this profile.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1PPriority

tmnxTestHdProfDot1pOut		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.19
dot1p-out value to for this profile.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1PPriority

tmnxTestHdProfActiveTests		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.20
Active tests that are using this profile
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

tmnxTestHdProfCompetedTests		1.3.6.1.4.1.6527.6.2.2.2.17.1.1.1.21
Completed tests that have used this profile
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

tmnxTestHdPayLdTable		1.3.6.1.4.1.6527.6.2.2.2.17.1.2
This table maintains the mapping of a particular forwarding class traffic into the specified queue.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxTestHdPayLdEntry

tmnxTestHdPayLdEntry		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1
Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxTestHdPayLdEntry

tmnxTestHdPayLdIndex		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.1
tmnxTestHdPayLdIndex is the payload index
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..4

tmnxTestHdPayLdRowStatus		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.2
Row Status for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

tmnxTestHdPayLdDesc		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.3
tmnxTestHdPayLdDesc is the textual description entered by user for this payload
Status: current	Access: read-create
OBJECT-TYPE
	TItemDescription

tmnxTestHdPayLddataPattrn		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.4
tmnxTestHdPayLddataPattrn is string of characters 0-9,a-f It is used to fill up the data field of the payload of the frame, repeating it in the payload field as many time as need to fill up the entire length of the payload
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

tmnxTestHdPayLdSrcIpv4Addr		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.5
tmnxTestHdPayLdSrcIpv4Addr is the source ip address to be used in frame payload
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

tmnxTestHdPayLdDstIpv4Addr		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.6
tmnxTestHdPayLdDstIpv4Addr is the destination ip address to be used in frame payload
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

tmnxTestHdPayLdDSCP		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.7
tmnxTestHdPayLdDSCP is the dscp value to be used in frame payload
Status: current	Access: read-create
OBJECT-TYPE
	TDSCPNameOrEmpty

tmnxTestHdPayLdIpProto		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.8
tmnxTestHdPayLdIpProto is the ip protocal value to be used in frame payload
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

tmnxTestHdPayLdIpTos		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.9
tmnxTestHdPayLdIpTos is the ip type of service value to be used in frame payload
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..8

tmnxTestHdPayLdIpTTL		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.10
tmnxTestHdPayLdIpTTL is the ip time to live value to be used in frame payload
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..255

tmnxTestHdPayLdSrcMac		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.11
Source MAC to be used in the frame payload.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

tmnxTestHdPayLdDstMac		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.12
Destination MAC to be used in the frame payload.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

tmnxTestHdPayLdSrcPort		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.13
Source Port to be used in the frame payload.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tmnxTestHdPayLdDstPort		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.14
Destination Port to be used in the frame payload.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tmnxTestHdPayLdLastChanged		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.15
The value tmnxTestHdPayLdLastChanged indicates the system uptime when an entry in tmnxTestHdPayLdTable was last changed.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxTestHdPayLdType		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.16
tmnxTestHdPayLdType indicates the payload type for this frame payload.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	tcp-ipv4(1), l2(2), udp-ipv4(3), ipv4(4)

tmnxTestHdPayLdVTagOne		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.17
Vlan tag one to be used in payload , if set to -1 packets are sent out without vlan tag
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..4094

tmnxTestHdPayLdVTagOneTpid		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.18
The tmnxTestHdPayLdVTagOneTpid variable indicates the ethertype to be set in the payload.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	600..ffff

tmnxTestHdPayLdVTagOneDot1p		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.19
IEEE 802.1p priority value for this frame payload.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1PPriority

tmnxTestHdPayLdVTagTwo		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.20
Vlan tag two to be used in payload , if set to -1 packets are sent out without vlan tag
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..4094

tmnxTestHdPayLdVTagTwoTpid		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.21
The tmnxTestHdPayLdVTagTwoTpid variable indicates the ethertype to be set in the payload.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	600..ffff

tmnxTestHdPayLdVTagTwoDot1p		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.22
IEEE 802.1p priority value for this frame payload.
Status: current	Access: read-create
OBJECT-TYPE
	Dot1PPriority

tmnxTestHdPayLdEthertype		1.3.6.1.4.1.6527.6.2.2.2.17.1.2.1.23
The tmnxTestHdPayLdEthertype variable indicates the ethertype to be set in the payload.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	600..ffff

tmnxTestHdAccCritTable		1.3.6.1.4.1.6527.6.2.2.2.17.1.3
This table maintains the mapping of a particular forwarding class traffic into the specified queue.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxTestHdAccCritEntry

tmnxTestHdAccCritEntry		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1
Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxTestHdAccCritEntry

tmnxTestHdAccCritIndex		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.1
Tok_String
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..4

tmnxTestHdAccCritRowStatus		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.2
Row Status for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

tmnxTestHdAccCritJittrRiseThres		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.3
tmnxTestHdAccCritJittrRiseThres is the acceptance criteria jitter rising threshold to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..2147483000

tmnxTestHdAccCritLatRiseThres		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.4
tmnxTestHdAccCritLatRiseThres is the acceptance criteria latency rising threshold to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..2147483000

tmnxTestHdAccCritLossRiseThres		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.5
tmnxTestHdAccCritLossRiseThres is the acceptance criteria loss rising threshold to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..1000000

tmnxTestHdAccCritLastChanged		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.6
The value tmnxTestHdAccCritLastChanged indicates the system uptime when an entry in tmnxTestHdAccCritTable was last changed.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxTestHdAccCritLossRiseThresIn		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.7
tmnxTestHdAccCritLossRiseThresIn is the acceptance criteria loss rising threshold in to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..1000000

tmnxTestHdAccCritLossRiseThresOut		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.8
tmnxTestHdAccCritLossRiseThresOut is the acceptance criteria out loss rising threshold to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..1000000

tmnxTestHdAccCritCirThres		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.9
tmnxTestHdAccCritCirThres is the acceptance criteria cir threshold to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..1000000

tmnxTestHdAccCritPirThres		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.10
tmnxTestHdAccCritPirThres is the acceptance criteria pir threshold to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..1000000

tmnxTestHdAccCritLatRiseThresIn		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.11
tmnxTestHdAccCritLatRiseThresIn is the acceptance criteria latency rising threshold-in to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..2147483000

tmnxTestHdAccCritLatRiseThresOut		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.12
tmnxTestHdAccCritLatRiseThresOut is the acceptance criteria latency rising threshold out to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..2147483000

tmnxTestHdAccCritJittrRiseThresIn		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.13
tmnxTestHdAccCritJittrRiseThresIn is the acceptance criteria jitter rising threshold-in to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..2147483000

tmnxTestHdAccCritJittrRiseThresOut		1.3.6.1.4.1.6527.6.2.2.2.17.1.3.1.14
tmnxTestHdAccCritJittrRiseThresOut is the acceptance criteria jitter rising threshold-out to be used for test run
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	-1 \| 0..2147483000

tmnxTestHdSessTable		1.3.6.1.4.1.6527.6.2.2.2.17.1.4
This table maintains the mapping of a particular forwarding class traffic into the specified queue.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxTestHdSessEntry

tmnxTestHdSessEntry		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1
Information about a particular test head result. Entries are read-only for the user.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxTestHdSessEntry

tmnxTestHdSessOwnerName		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.1
The test name index of this Test head test session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

tmnxTestHdSessTestName		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.2
The test name index of this Test head test session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

tmnxTestHdSessStartTime		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.3
tmnxTestHdSessStartTime test head start time for this session
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

tmnxTestHdSessCompletedTime		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.4
tmnxTestHdSessCompletedTime is the time stamp at which this test head run session has completed.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

tmnxTestHdSessTotalTime		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.5
tmnxTestHdSessTotalTime is the total time since test head test has started
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdSessFc		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.6
tmnxTestHdFc is the fc used in this test head session
Status: current	Access: read-only
OBJECT-TYPE
	TFCName

tmnxTestHdSessCompleted		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.7
tmnxTestHdSessCompleted is true if the test is completed else it is false.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tmnxTestHdSessStopped		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.8
tmnxTestHdStopped is true if the test is stopped midway else it is false.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tmnxTestHdSessProfId		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.9
tmnxTestHdSessProfId is the profile index for this session
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..10

tmnxTestHdSessPayLdId		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.10
tmnxTestHdSessPayLdId is the payload index used for this session
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

tmnxTestHdSessAccCritId		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.11
tmnxTestHdSessAccCritId is the acceptance criteria id used for this test run
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

tmnxTestHdSessSapPortId		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.12
The sap port id ID used in for this test run.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxPortID

tmnxTestHdSessSapEncapValue		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.13
The sap encap value used in this test run.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxEncapVal

tmnxTestHdSessTransCount		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.14
The total number of packets injected
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdSessRecvCount		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.15
The total number of packets received
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdSessMinLatency		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.16
The Latency measured minimum for this test
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdSessMaxLatency		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.17
The Latency measured maximum for this test
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdSessMeasuredLatency		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.18
The Latency measured for this test
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdSessMeasuredJitter		1.3.6.1.4.1.6527.6.2.2.2.17.1.4.1.19
The Jitter measured for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdResultsTable		1.3.6.1.4.1.6527.6.2.2.2.17.1.5
This table maintains the mapping of a particular forwarding class traffic into the specified queue.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxTestHdResultsEntry

tmnxTestHdResultsEntry		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1
Information about a particular test head result. Entries are read-only for the user.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxTestHdResultsEntry

tmnxTestHdOwnerName		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.1
The owner name index of the Test head test.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

tmnxTestHdTestName		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.2
The test name index of the Test head test.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

tmnxTestHdResProfId		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.3
The Testhead profile Id used for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdResProfPayLdId		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.4
The Testhead profile Pay Load Id used for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdResProfAccCritId		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.5
The Testhead profile Acceptance Criteria Id used for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdResTransCount		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.6
The total number of packets injected
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdResRecvCount		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.7
The total number of packets received
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdResMeasuredThruput		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.8
The throughput measured for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdResMeasuredFLR		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.9
The frame loss ratio measured for this test, if set to -1 tmnxTestHdResMeasuredFLR is not applicable for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdResMeasuredLatency		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.10
The Latency measured for this test
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdResLatencyAccptanceResult		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.11
The Latency Acceptance for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	pass(1), fail(2), not-applicable(3)

tmnxTestHdResMeasuredJitter		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.12
The Jitter measured for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tmnxTestHdResJitterAccptanceResult		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.13
The Jitter Acceptance for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	pass(1), fail(2), not-applicable(3)

tmnxTestHdResSapPortId		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.14
The sap port id ID used in for this test run.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxPortID

tmnxTestHdResSapEncapValue		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.15
The sap encap value used in this test run.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxEncapVal

tmnxTestHdResFLRAccptanceResult		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.16
The FLR Acceptance for this test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	pass(1), fail(2), not-applicable(3)

tmnxTestHdResMinLatency		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.17
The Latency measured minimum for this test
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdResMaxLatency		1.3.6.1.4.1.6527.6.2.2.2.17.1.5.1.18
The Latency measured maximum for this test
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tmnxTestHdProfScalarObjs		1.3.6.1.4.1.6527.6.2.2.2.17.1.6
OBJECT IDENTIFIER

tmnxTestHdName		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.1
tmnxTestHdName is a mandatory parameter that needs to be set along with tmnxTestHdAdminStatus to start a test head test.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

tmnxTestHdOwner		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.2
tmnxTestHdOwner is a mandatory parameter that needs to be set along with tmnxTestHdAdminStatus to start a test head test.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

tmnxTestHdStartTime		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.3
tmnxTestHdStartTime test head start time sent in the trap message
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DateAndTime

tmnxTestHdElapsedTime		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.4
tmnxTestHdElapsedTime is the elapsed time since test head test has started
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

tmnxTestHdFc		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.5
tmnxTestHdFc is an optional parameter that needs to be set along with tmnxTestHdAdminStatus to start a test head test.If tmnxTestHdFc is not given along with tmnxTestHdAdminStatus default forwarding class 'be' would be used
Status: current	Access: read-write
OBJECT-TYPE
	TFCName

tmnxTestHdAvgLatency		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.6
tmnxTestHdAvgLatency is the measured average latency in the test head run. tmnxTestHdAvgLatency is sent in the trap upon test completion
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	0..2147483000

tmnxTestHdFrLossRatio		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.7
tmnxTestHdFrLossRatio is the measured frame loss ratio in the test head run. tmnxTestHdFrLossRatio is sent in the trap upon test completion
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	0..10000000

tmnxTestHdJitter		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.8
tmnxTestHdJitter is the measured jitter in the test head run. tmnxTestHdJitter is sent in the trap upon test completion
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	0..2147483000

tmnxTestHdDsiredThrpt		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.9
tmnxTestHdDsiredThrpt is the desired through put in the test head run. tmnxTestHdDsiredThrpt is sent in the trap upon test completion
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

tmnxTestHdAchvdThrpt		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.10
tmnxTestHdAchvdThrpt is the acheived through put in the test head run. tmnxTestHdAchvdThrpt is sent in the trap upon test completion
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

tmnxTestHdCompleted		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.11
tmnxTestHdCompleted is true if the test is completed else it is false. tmnxTestHdCompleted is sent in the trap upon test completion
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TruthValue

tmnxTestHdStopped		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.12
tmnxTestHdStopped is true if the test is stopped midway else it is false. tmnxTestHdStopped is sent in the trap upon test completion
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TruthValue

tmnxTestHdTestStatus		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.13
tmnxTestHdTestStatus is sent in the trap upon test completion. tmnxTestHdTestStatus is pass if the desired test results are acheived.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	pass(1), fail(2), not-available(3)

tmnxTestHdCompletedTime		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.14
tmnxTestHdCompletedTime is the time at which test head run has completed. tmnxTestHdCompletedTime is sent in the trap upon test completion.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DateAndTime

tmnxTestHdSapPortId		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.15
The Sap Port ID to be used for the test run, it has to be supplied along with tmnxTestHdSapEncapValue when the test is started.
Status: current	Access: read-write
OBJECT-TYPE
	TmnxPortID

tmnxTestHdSapEncapValue		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.16
The Sap Encap value to be used for the test run, it has to be supplied along with tmnxTestHdSapPortId when the test is started.
Status: current	Access: read-write
OBJECT-TYPE
	TmnxEncapVal

tmnxTestHdAdminStatus		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.17
Reflects the desired state that a Test Head should be in: enabled(1) - Attempt to activate the test as defined by tmnxTestHdName, tmnxTestHdOwner, tmnxTestHdProfId, tmnxTestHdPayLdId, tmnxTestHdAccCritId, tmnxTestHdSapPortId, tmnxTestHdSapEncapValue, tmnxTestHdFc . disabled(2) - Deactivate the test as defined by this tmnxOamPingCtlEntry. An attempt to set tmnxOamPingCtlAdminStatus to 'enabled' will fail if the parameters required by a particular TestHead test have not been set along with tmnxTestHdAdminStatus Upon completion of a Test head test, he agent will reset the value of this object to 'disabled'. When this object has the value 'enabled' an attempt to modify any of the test parameters will fail with an inconsistentValue error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

tmnxTestHdProfId		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.18
tmnxTestHdProfId is the test head profile to be used for the test run, it has to be supplied along with tmnxTestHdAdminStatus when the test is started. tmnxTestHdProfEntry corresponding to tmnxTestHdProfId should be creted before starting the test.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..10

tmnxTestHdAccCritId		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.19
tmnxTestHdAccCritId is the acceptance criteria to be used for the test run, it is an optional parameter to be supplied along with tmnxTestHdAdminStatus when the test is started. tmnxTestHdAccCritEntry corresponding to tmnxTestHdAccCritId should be creted before starting the test.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4

tmnxTestHdPayLdId		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.20
tmnxTestHdPayLd is the frame payload to be used for the test run, it is an optional parameter to be supplied along with tmnxTestHdAdminStatus when the test is started. tmnxTestHdPayLdEntry corresponding to tmnxTestHdPayLdIndex should be creted before starting the test.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4

tmnxTestHdColorAware		1.3.6.1.4.1.6527.6.2.2.2.17.1.6.21
tmnxTestHdColorAware can be set to true to run when the test is started to run color-aware tests.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tmnxOamTestHeadTestCompleted		1.3.6.1.4.1.6527.6.2.2.3.3.1.1
Generated at the completion of Test Head completion.
Status: current	Access: read-write
NOTIFICATION-TYPE

tmnxTestHdObjsV5v0Group		1.3.6.1.4.1.6527.6.2.2.1.17.1.1.1
The group of Test Head objects supported in 7210 5.0 release
Status: current	Access: read-write
OBJECT-GROUP

tmnxTestHdNotifyV5v0Group		1.3.6.1.4.1.6527.6.2.2.1.17.1.1.2
The group of notifications supported in 7210 5.0 release
Status: current	Access: read-write
NOTIFICATION-GROUP