TIMETRA-SAS-BGP-MIB

File: TIMETRA-SAS-BGP-MIB.mib (5982 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-SAS-GLOBAL-MIB TIMETRA-BGP-MIB BGP4-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Unsigned32 Gauge32
Counter32 Integer32 Counter64
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TEXTUAL-CONVENTION RowStatus DisplayString
TruthValue TimeStamp TestAndIncr
timetraSASObjs timetraSASNotifyPrefix timetraSASConfs
timetraSASModules tBgpPeerNgParamsEntry bgp4PathAttrEntry

Defined Types

TBgpPeerNgParamsExtnEntry  
SEQUENCE    
  tBgpPeerNgUseSvcRoutes TruthValue

Bgp4PathAttrExtnEntry  
SEQUENCE    
  bgp4PathUseSvcRoutesOpt TruthValue

Defined Values

timetraSASBgpMIBModule 1.3.6.1.4.1.6527.6.2.1.1.15
This document is the SNMP MIB module for Alcatel-Lucent's implementation of BGP. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. There is one BGP instance per virtual router. Each BGP instance can have a number of peer groups. The MIB objects here are organized in to four groups: - global objects (nothing there for now) - per-instance objects - per-peer-group objects - per-peer objects The value of most BGP configuration objects can be defaulted at three levels: at the per-peer level, at the peer group level, and at the BGP instance level. The per-peer object values are set: - first by the peer object value, if set; - second, if not set then by the peer-group object value, if that is set; - third, if not set, by the instance object value.
MODULE-IDENTITY    

tmnxSASBgpObjects 1.3.6.1.4.1.6527.6.2.2.2.18
OBJECT IDENTIFIER    

tBgpSASPeerObjects 1.3.6.1.4.1.6527.6.2.2.2.18.1
OBJECT IDENTIFIER    

tmnxSASBgpConformance 1.3.6.1.4.1.6527.6.2.2.1.14
OBJECT IDENTIFIER    

tmnxSASBgpGroups 1.3.6.1.4.1.6527.6.2.2.1.14.1
OBJECT IDENTIFIER    

tBgpPeerNgParamsExtnTable 1.3.6.1.4.1.6527.6.2.2.2.18.1.10
tBgpPeerNgParamsExtnTable provides information about the attributes configured for the BGP instance.
OBJECT-TYPE    
  SEQUENCE OF  
    TBgpPeerNgParamsExtnEntry

tBgpPeerNgParamsExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.18.1.10.1
An entry in the tBgpPeerNgParamsExtnTable. Each entry maintains the attributes configured for BGP instance that are supported in addition to objects in tBgpPeerNgParamsTable.
OBJECT-TYPE    
  TBgpPeerNgParamsExtnEntry  

tBgpPeerNgUseSvcRoutes 1.3.6.1.4.1.6527.6.2.2.2.18.1.10.1.1
The value of tBgpPeerNgUseSvcRoutes specifies whether to use service routers for this neighbor
OBJECT-TYPE    
  TruthValue  

bgp4PathAttrExtnTable 1.3.6.1.4.1.6527.6.2.2.2.18.1.11
The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers in addition to bgp4PathAttrTable.
OBJECT-TYPE    
  SEQUENCE OF  
    Bgp4PathAttrExtnEntry

bgp4PathAttrExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.18.1.11.1
Information about a path to a network.
OBJECT-TYPE    
  Bgp4PathAttrExtnEntry  

bgp4PathUseSvcRoutesOpt 1.3.6.1.4.1.6527.6.2.2.2.18.1.11.1.1
The value of bgp4PathUseSvcRoutesOpt specifies whether 3107 optimisation has been done or not.
OBJECT-TYPE    
  TruthValue  

tmnxSASBgpGlobalV7v0Group 1.3.6.1.4.1.6527.6.2.2.1.14.1.1
The group of objects supporting management of extended BGP on Alcatel-Lucent 7210 series systems release 7.0.
OBJECT-GROUP