TIMETRA-PIM-NG-MIB

File: TIMETRA-PIM-NG-MIB.mib (392857 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB IF-MIB TIMETRA-GLOBAL-MIB
TIMETRA-TC-MIB TIMETRA-VRTR-MIB TIMETRA-SAP-MIB
TIMETRA-CHASSIS-MIB TIMETRA-MCAST-CAC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Integer32 Counter32 Gauge32
Counter64 NOTIFICATION-TYPE MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP RowStatus
TimeStamp TruthValue InetAddress
InetAddressType InetAddressPrefixLength InterfaceIndexOrZero
InterfaceIndex timetraSRMIBModules tmnxSRObjs
tmnxSRNotifyPrefix tmnxSRConfs TmnxServId
TmnxAdminState TmnxOperState TNamedItemOrEmpty
IpAddressPrefixLength TPolicyStatementNameOrEmpty TmnxMulticastAddrFamily
TNamedItem TmnxEnabledDisabled TmnxVRtrID
TmnxVPNRouteDistinguisher vRtrID vRtrIfIndex
sapPortId sapEncapValue tmnxCardHwIndex
tmnxMcacLevelId tmnxMcacLagPortsDown

Defined Types

VRtrPimNgGeneralEntry  
SEQUENCE    
  vRtrPimNgGenRowLastChanged TimeStamp
  vRtrPimNgGenAdminState TmnxAdminState
  vRtrPimNgGenOperState TmnxOperState
  vRtrPimNgGenCreateInterfaces INTEGER
  vRtrPimNgGenMaxMdts Integer32
  vRtrPimNgGenNonDrAttractTraffic TruthValue
  vRtrPimNgGenEcmpBalance TruthValue
  vRtrPimNgGenEcmpBalanceHoldTime Unsigned32
  vRtrPimNgGenEcmpReBlncInProg TruthValue
  vRtrPimNgGenEcmpLastReBlncTime TimeStamp
  vRtrPimNgGenEcmpRebalanceType INTEGER
  vRtrPimNgGenEcmpOptThreshold Unsigned32
  vRtrPimNgGenEcmpNextBalanceTime Unsigned32
  vRtrPimNgGenLagUsageOptimize TruthValue
  vRtrPimNgGenEcmpHashingEnabled TruthValue
  vRtrPimNgGenEnableMdtSpt TruthValue

VRtrPimNgAFGenEntry  
SEQUENCE    
  vRtrPimNgAFGenAFType TmnxMulticastAddrFamily
  vRtrPimNgAFGenAdminState TmnxAdminState
  vRtrPimNgAFGenOperState TmnxOperState
  vRtrPimNgAFGenCBSRPriority Integer32
  vRtrPimNgAFGenCBSRAddressType InetAddressType
  vRtrPimNgAFGenCBSRAddress InetAddress
  vRtrPimNgAFGenCBSRAdminState TmnxAdminState
  vRtrPimNgAFGenCBSROperState TmnxOperState
  vRtrPimNgAFGenBSRAddressType InetAddressType
  vRtrPimNgAFGenBSRAddress InetAddress
  vRtrPimNgAFGenBSRPriority Integer32
  vRtrPimNgAFGenBSRExpiryTime Unsigned32
  vRtrPimNgAFGenBSRState INTEGER
  vRtrPimNgAFGenBSRUpTime Unsigned32
  vRtrPimNgAFGenCRPAddressType InetAddressType
  vRtrPimNgAFGenCRPAddress InetAddress
  vRtrPimNgAFGenCRPAdminState TmnxAdminState
  vRtrPimNgAFGenCRPOperState TmnxOperState
  vRtrPimNgAFGenCRPHoldtime Integer32
  vRtrPimNgAFGenCRPPriority Integer32
  vRtrPimNgAFGenMdtDefGrpAddrType InetAddressType
  vRtrPimNgAFGenMdtDefGrpAddress InetAddress
  vRtrPimNgAFGenMTIfIndex InterfaceIndexOrZero
  vRtrPimNgAFGenCBSRHashMaskLen Integer32
  vRtrPimNgAFGenBSRHashMaskLen Integer32
  vRtrPimNgAFGenBSRRpfIfIndex InterfaceIndexOrZero
  vRtrPimNgAFGenRpfLookupSequence INTEGER
  vRtrPimNgAFGenMdtDataPrefixType InetAddressType
  vRtrPimNgAFGenMdtDataPrefix InetAddress
  vRtrPimNgAFGenMdtDataPrefixMask InetAddressPrefixLength
  vRtrPimNgAFGenMdtDataDlayIntrvl Unsigned32
  vRtrPimNgAFGenMdtDataJoinTlvPck TruthValue
  vRtrPimNgAFGenRowLastChanged TimeStamp
  vRtrPimNgAFGenERP TruthValue
  vRtrPimNgAFGenERPAdminState TmnxAdminState
  vRtrPimNgAFGenMvpnAutoDiscovery TruthValue
  vRtrPimNgAFGenMvpnCMcastSignal INTEGER
  vRtrPimNgAFGenMvpnGrpAddrMode INTEGER
  vRtrPimNgAFGenMvpnSpmsiAutoDisc TruthValue
  vRtrPimNgAFGenMvpnUMHSelection INTEGER
  vRtrPimNgAFGenMvpnIntersiteShrd TmnxEnabledDisabled
  vRtrPimNgAFGenSSMDefRangeDisabl TruthValue
  vRtrPimNgAFGenMvpnAD INTEGER
  vRtrPimNgAFGenMdtDataGrpAddrMode INTEGER
  vRtrPimNgAFGenEnableAsmDataMdt TruthValue
  vRtrPimNgAfGenAutoRPDiscovery TruthValue
  vRtrPimNgAfGenSSMAsrtCompMode TruthValue

VRtrPimNgStaticRPEntry  
SEQUENCE    
  vRtrPimNgStaticRPRPAddressType InetAddressType
  vRtrPimNgStaticRPRPAddress InetAddress
  vRtrPimNgStaticRPRowStatus RowStatus
  vRtrPimNgStaticRPRowLastChanged TimeStamp
  vRtrPimNgStaticRPOverride TruthValue

VRtrPimNgStGrpToRPEntry  
SEQUENCE    
  vRtrPimNgStGrptoRPRPAddrType InetAddressType
  vRtrPimNgStGrptoRPRPAddress InetAddress
  vRtrPimNgStaticGroupAddrType InetAddressType
  vRtrPimNgStaticGroupAddr InetAddress
  vRtrPimNgStaticGroupMask InetAddressPrefixLength
  vRtrPimNgStGrpToRPRowStatus RowStatus
  vRtrPimNgStGrpToRPRowLstChanged TimeStamp

VRtrPimNgGrpSrcEntry  
SEQUENCE    
  vRtrPimNgGrpSrcGrpAddrType InetAddressType
  vRtrPimNgGrpSrcGroupAddress InetAddress
  vRtrPimNgGrpSrcSrcAddrType InetAddressType
  vRtrPimNgGrpSrcSourceAddress InetAddress
  vRtrPimNgGrpSrcType INTEGER
  vRtrPimNgGrpSrcRPAddrType InetAddressType
  vRtrPimNgGrpSrcRPAddr InetAddress
  vRtrPimNgGrpSrcRpfNbrAddrType InetAddressType
  vRtrPimNgGrpSrcRpfNbrAddr InetAddress
  vRtrPimNgGrpSrcRpfIfIndex InterfaceIndexOrZero
  vRtrPimNgGrpSrcRptRpfNbrAdrType InetAddressType
  vRtrPimNgGrpSrcRptRpfNbrAddr InetAddress
  vRtrPimNgGrpSrcMRIBNHopAddrType InetAddressType
  vRtrPimNgGrpSrcMRIBNextHopAddr InetAddress
  vRtrPimNgGrpSrcMRIBSrcFlags BITS
  vRtrPimNgGrpSrcFlags BITS
  vRtrPimNgGrpSrcUpstreamJpState INTEGER
  vRtrPimNgGrpSrcUpstreamJpTimer Unsigned32
  vRtrPimNgGrpSrcUstrmRptJpState INTEGER
  vRtrPimNgGrpSrcUstrmRptOvrdeTmr Unsigned32
  vRtrPimNgGrpSrcRegisterState INTEGER
  vRtrPimNgGrpSrcRegisterStopTmr Unsigned32
  vRtrPimNgGrpSrcKeepaliveTimer Unsigned32
  vRtrPimNgGrpSrcNumImmediateOif Gauge32
  vRtrPimNgGrpSrcNumInheritedOif Gauge32
  vRtrPimNgGrpSrcNumInherRptOif Gauge32
  vRtrPimNgGrpSrcNumLclRxInclIf Gauge32
  vRtrPimNgGrpSrcNumLclRxExclIf Gauge32
  vRtrPimNgGrpSrcNumJoinPruneIf Gauge32
  vRtrPimNgGrpSrcNumLostAssertIf Gauge32
  vRtrPimNgGrpSrcUpTime Unsigned32
  vRtrPimNgGrpSrcNumSGRptPruneOif Gauge32
  vRtrPimNgGrpSrcRxRegFrmAnycstRP TruthValue
  vRtrPimNgGrpSrcRslvdByRtTblType INTEGER
  vRtrPimNgGrpSrcCurrFwdingRate Counter32
  vRtrPimNgGrpSrcCurrFwdingOFRate Counter32
  vRtrPimNgGrpSrcCurrFwdingHCRate Counter64
  vRtrPimNgGrpSrcGrpSptThreshold Unsigned32
  vRtrPimNgGrpSrcGrpAdminBw Gauge32
  vRtrPimNgGrpSrcGrpEcmpOptThresh Unsigned32
  vRtrPimNgGrpSrcSpmsiRpfIfIndex InterfaceIndexOrZero
  vRtrPimNgGrpSrcRpfSecNbrAddrTyp InetAddressType
  vRtrPimNgGrpSrcRpfSecNbrAddr InetAddress
  vRtrPimNgGrpSrcRpfSecIfIndex InterfaceIndexOrZero
  vRtrPimNgGrpSrcAdvtAddrType InetAddressType
  vRtrPimNgGrpSrcAdvtAddr InetAddress

VRtrPimNgGrpSrcIfEntry  
SEQUENCE    
  vRtrPimNgGrpSrcIfFlags BITS
  vRtrPimNgGrpSrcSpmsiIfIndex InterfaceIndexOrZero

VRtrPimNgCRPGrpPrefixEntry  
SEQUENCE    
  vRtrPimNgCRPGrpPrfixGrpAddrType InetAddressType
  vRtrPimNgCRPGrpPrefixGrpAddr InetAddress
  vRtrPimNgCRPGrpPrefixGrpMask IpAddressPrefixLength
  vRtrPimNgCRPGrpPrefixRowStatus RowStatus
  vRtrPimNgCRPGrpPrfixRowLstChngd TimeStamp

VRtrPimNgCRPEntry  
SEQUENCE    
  vRtrPimNgCRPAddressType InetAddressType
  vRtrPimNgCRPAddress InetAddress
  vRtrPimNgCRPGrpAddrType InetAddressType
  vRtrPimNgCRPGrpAddr InetAddress
  vRtrPimNgCRPGrpMask IpAddressPrefixLength
  vRtrPimNgCRPHoldtime Integer32
  vRtrPimNgCRPPriority Integer32
  vRtrPimNgCRPExpiryTime Integer32

VRtrPimNgRPSetEntry  
SEQUENCE    
  vRtrPimNgRPSetType INTEGER
  vRtrPimNgRPSetGrpAddrType InetAddressType
  vRtrPimNgRPSetGrpAddr InetAddress
  vRtrPimNgRPSetGrpMask IpAddressPrefixLength
  vRtrPimNgRPSetCRPAddrType InetAddressType
  vRtrPimNgRPSetCRPAddress InetAddress
  vRtrPimNgRPSetHoldtime Integer32
  vRtrPimNgRPSetPriority Integer32
  vRtrPimNgRPSetExpiryTime Unsigned32

VRtrPimNgGenStatEntry  
SEQUENCE    
  vRtrPimNgGenStatTxCrpaPdus Counter32
  vRtrPimNgGenStatTxCrpaPduErrs Counter32
  vRtrPimNgGenStatRxCrpaPdus Counter32
  vRtrPimNgGenStatRxCrpaPduDrops Counter32
  vRtrPimNgGenStatStarStarRPTypes Gauge32
  vRtrPimNgGenStatStarGTypes Gauge32
  vRtrPimNgGenStatSGTypes Gauge32
  vRtrPimNgGenStatTxRegisters Counter32
  vRtrPimNgGenStatTxRegisterErrs Counter32
  vRtrPimNgGenStatTxNullRegisters Counter32
  vRtrPimNgGenStatTxRegTTLDrops Counter32
  vRtrPimNgGenStatForwardCrpaPdus Counter32
  vRtrPimNgGenStatFwdCrpaDrops Counter32
  vRtrPimNgGenStatTxMdtJoinTlvs Counter32
  vRtrPimNgGenStatRxMdtJoinTlvs Counter32
  vRtrPimNgGenStatTxMdtJnTlvErrs Counter32
  vRtrPimNgGenStatRxMdtJnTlvErrs Counter32
  vRtrPimNgGenStatTxActiveMdts Gauge32
  vRtrPimNgGenStatRxActiveMdts Gauge32
  vRtrPimNgGenStatTxSpmsiLimitHits Counter32
  vRtrPimNgGenStatRxCtrlPduIfDrops Counter32
  vRtrPimNgGenStatP2mpPmsiReqFails Counter32
  vRtrPimNgGenStatP2mpPmsiCrtFails Counter32
  vRtrPimNgGenStatTxMdts Counter32
  vRtrPimNgGenStatRxMdts Counter32

VRtrPimNgGrpSrcStatEntry  
SEQUENCE    
  vRtrPimNgGrpSrcStatFrwdedPkts Counter32
  vRtrPimNgGrpSrcStatOFFrwdedPkts Counter32
  vRtrPimNgGrpSrcStatHCFrwdedPkts Counter64
  vRtrPimNgGrpSrcStatDscrdPkts Counter32
  vRtrPimNgGrpSrcStatOFDscrdPkts Counter32
  vRtrPimNgGrpSrcStatHCDscrdPkts Counter64
  vRtrPimNgGrpSrcStatRPFMsmtch Counter32
  vRtrPimNgGrpSrcStatOFRPFMsmtch Counter32
  vRtrPimNgGrpSrcStatHCRPFMsmtch Counter64
  vRtrPimNgGrpSrcStatFrdedOct Counter32
  vRtrPimNgGrpSrcStatOFFrdedOct Counter32
  vRtrPimNgGrpSrcStatHCFrdedOct Counter64

VRtrPimNgGenPolicyEntry  
SEQUENCE    
  vRtrPimNgImportJoinPrunePolicy1 TNamedItemOrEmpty
  vRtrPimNgImportJoinPrunePolicy2 TNamedItemOrEmpty
  vRtrPimNgImportJoinPrunePolicy3 TNamedItemOrEmpty
  vRtrPimNgImportJoinPrunePolicy4 TNamedItemOrEmpty
  vRtrPimNgImportJoinPrunePolicy5 TNamedItemOrEmpty
  vRtrPimNgImportRegisterPolicy1 TNamedItemOrEmpty
  vRtrPimNgImportRegisterPolicy2 TNamedItemOrEmpty
  vRtrPimNgImportRegisterPolicy3 TNamedItemOrEmpty
  vRtrPimNgImportRegisterPolicy4 TNamedItemOrEmpty
  vRtrPimNgImportRegisterPolicy5 TNamedItemOrEmpty
  vRtrPimNgImportBootstrapPolicy1 TNamedItemOrEmpty
  vRtrPimNgImportBootstrapPolicy2 TNamedItemOrEmpty
  vRtrPimNgImportBootstrapPolicy3 TNamedItemOrEmpty
  vRtrPimNgImportBootstrapPolicy4 TNamedItemOrEmpty
  vRtrPimNgImportBootstrapPolicy5 TNamedItemOrEmpty
  vRtrPimNgExportBootstrapPolicy1 TNamedItemOrEmpty
  vRtrPimNgExportBootstrapPolicy2 TNamedItemOrEmpty
  vRtrPimNgExportBootstrapPolicy3 TNamedItemOrEmpty
  vRtrPimNgExportBootstrapPolicy4 TNamedItemOrEmpty
  vRtrPimNgExportBootstrapPolicy5 TNamedItemOrEmpty

VRtrPimNgSSMGroupEntry  
SEQUENCE    
  vRtrPimNgSSMGroupAddressType InetAddressType
  vRtrPimNgSSMGroupAddress InetAddress
  vRtrPimNgSSMGroupMask InetAddressPrefixLength
  vRtrPimNgSSMGroupRowStatus RowStatus
  vRtrPimNgSSMGroupRowLastChanged TimeStamp

VRtrPimNgIfEntry  
SEQUENCE    
  vRtrPimNgIfRowStatus RowStatus
  vRtrPimNgIfLastChangeTime TimeStamp
  vRtrPimNgIfAdminState TmnxAdminState
  vRtrPimNgIfOperState TmnxOperState
  vRtrPimNgIfHelloInterval Integer32
  vRtrPimNgIfTrackingSupport TruthValue
  vRtrPimNgIfMulticastSenders INTEGER
  vRtrPimNgIfAutoCreated TruthValue
  vRtrPimNgIfBSMCheckRouterAlert TruthValue
  vRtrPimNgIfHelloMultiplier Unsigned32
  vRtrPimNgIfImprovedAssert TruthValue
  vRtrPimNgIfStickyDR TruthValue
  vRtrPimNgIfStickyDRPriority Unsigned32
  vRtrPimNgIfMaxGroups Unsigned32
  vRtrPimNgIfEnableBfd TruthValue
  vRtrPimNgIfThreeWayHello INTEGER
  vRtrPimNgIfMcacPolicyName TPolicyStatementNameOrEmpty
  vRtrPimNgIfMcacUnconstrainedBW Integer32
  vRtrPimNgIfMcacConstAdminState TmnxAdminState
  vRtrPimNgIfMcacPreRsvdMandBW Integer32
  vRtrPimNgIfMcacinUseMandBw Unsigned32
  vRtrPimNgIfMcacinUseOpnlBw Unsigned32
  vRtrPimNgIfMcacAvailMandBw Unsigned32
  vRtrPimNgIfMcacAvailOpnlBw Unsigned32
  vRtrPimNgIfMcacValuesInTransit TruthValue
  vRtrPimNgIfDRPriority Unsigned32
  vRtrPimNgIfAssertPeriod Integer32
  vRtrPimNgIfInstantPruneEcho TmnxEnabledDisabled
  vRtrPimNgIfIpv6EnableBfd TruthValue
  vRtrPimNgIfP2mpLdpTreeJoin TruthValue
  vRtrPimNgIfExtranetType INTEGER
  vRtrPimNgIfExtranetMvpnId Unsigned32

VRtrPimNgAFIfEntry  
SEQUENCE    
  vRtrPimNgAFIfAFType TmnxMulticastAddrFamily
  vRtrPimNgAFIfAdminState TmnxAdminState
  vRtrPimNgAFIfOperState TmnxOperState
  vRtrPimNgAFIfMdtDefGrpAddrType InetAddressType
  vRtrPimNgAFIfMdtDefGrpAddress InetAddress
  vRtrPimNgAFIfNextHelloTime Unsigned32
  vRtrPimNgAFIfOperDRPriority Unsigned32
  vRtrPimNgAFIfCurrentGroups Gauge32
  vRtrPimNgAFIfMaxGroupsTillNow Counter32
  vRtrPimNgAFIfDRType InetAddressType
  vRtrPimNgAFIfDR InetAddress
  vRtrPimNgAFIfTrackSprtOperState TruthValue

VRtrPimNgIfNeighborEntry  
SEQUENCE    
  vRtrPimNgIfNeighborAddressType InetAddressType
  vRtrPimNgIfNeighborAddress InetAddress
  vRtrPimNgIfNeighborUpTime Unsigned32
  vRtrPimNgIfNeighborExpiryTime Unsigned32
  vRtrPimNgIfNeighborGenId Unsigned32
  vRtrPimNgIfNeighborDrPriority Unsigned32
  vRtrPimNgIfNeighborDrPriorPrsnt TruthValue
  vRtrPimNgIfNeighborLanDelay Unsigned32
  vRtrPimNgIfNeighborLanDlayPrsnt TruthValue
  vRtrPimNgIfNeighborTrckngSpprt TruthValue
  vRtrPimNgIfNeighborHoldTime Unsigned32
  vRtrPimNgIfNeighborOvrdeIntrvl Unsigned32

VRtrPimNgIfGrpSrcEntry  
SEQUENCE    
  vRtrPimNgIfGrpSrcType INTEGER
  vRtrPimNgIfGrpSrcGroupAddrType InetAddressType
  vRtrPimNgIfGrpSrcGroupAddress InetAddress
  vRtrPimNgIfGrpSrcSourceAddrType InetAddressType
  vRtrPimNgIfGrpSrcSourceAddress InetAddress
  vRtrPimNgIfGrpSrcRPAddrType InetAddressType
  vRtrPimNgIfGrpSrcRPAddress InetAddress
  vRtrPimNgIfGrpSrcJPState INTEGER
  vRtrPimNgIfGrpSrcPrunePendTimer Unsigned32
  vRtrPimNgIfGrpSrcJoinPruneTimer Unsigned32
  vRtrPimNgIfGrpSrcJPRptState INTEGER
  vRtrPimNgIfGrpSrcRptPrnePendTmr Unsigned32
  vRtrPimNgIfGrpSrcRptJoinPrneTmr Unsigned32
  vRtrPimNgIfGrpSrcAssertState INTEGER
  vRtrPimNgIfGrpSrcAssertTimer Unsigned32
  vRtrPimNgIfGrpSrcAssertMetric Unsigned32
  vRtrPimNgIfGrpSrcAsrtMetricPref Unsigned32
  vRtrPimNgIfGrpSrcAssertRPTBit TruthValue
  vRtrPimNgIfGrpSrcAsrtWinnerMtrc Unsigned32
  vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf Unsigned32
  vRtrPimNgIfGrpSrcAsrtWnrRPTBit TruthValue
  vRtrPimNgIfGrpSrcAsrtWnrAddrTyp InetAddressType
  vRtrPimNgIfGrpSrcAsrtWinnerAddr InetAddress
  vRtrPimNgIfGrpSrcUpTime Unsigned32
  vRtrPimNgIfGrpSrcDataMtIfIndex InterfaceIndexOrZero

VRtrPimNgIfStatsEntry  
SEQUENCE    
  vRtrPimNgIfTxPkts Counter32
  vRtrPimNgIfTxHellos Counter32
  vRtrPimNgIfTxAsserts Counter32
  vRtrPimNgIfTxRegisterStops Counter32
  vRtrPimNgIfTxRegisterStopErrs Counter32
  vRtrPimNgIfTxBsmPdus Counter32
  vRtrPimNgIfTxBsmErrs Counter32
  vRtrPimNgIfRxPkts Counter32
  vRtrPimNgIfRxHellos Counter32
  vRtrPimNgIfRxHellosDropped Counter32
  vRtrPimNgIfRxNbrUnknown Counter32
  vRtrPimNgIfRxBadChecksumDiscard Counter32
  vRtrPimNgIfRxBadVersionDiscard Counter32
  vRtrPimNgIfRxBadEncodings Counter32
  vRtrPimNgIfRxAsserts Counter32
  vRtrPimNgIfRxAssertErrs Counter32
  vRtrPimNgIfRxRegisters Counter32
  vRtrPimNgIfRxRegisterErrs Counter32
  vRtrPimNgIfRxNullRegisters Counter32
  vRtrPimNgIfRxRegisterStops Counter32
  vRtrPimNgIfRxRegisterStopErrs Counter32
  vRtrPimNgIfRxCRPAdvNoRtrAlert Counter32
  vRtrPimNgIfRxBsmPdus Counter32
  vRtrPimNgIfRxBsmPduDrops Counter32
  vRtrPimNgIfStarStarRPTypes Gauge32
  vRtrPimNgIfStarGTypes Gauge32
  vRtrPimNgIfSGTypes Gauge32
  vRtrPimNgIfJoinPolicyDrops Counter32
  vRtrPimNgIfRegisterPolicyDrops Counter32
  vRtrPimNgIfBtrImpPolicyDrops Counter32
  vRtrPimNgIfBtrExpPolicyDrops Counter32
  vRtrPimNgIfTxJoinPrunes Counter32
  vRtrPimNgIfRxJoinPrunes Counter32
  vRtrPimNgIfRxInvalidJoinPrunes Counter32
  vRtrPimNgIfRxInvalidRegisters Counter32
  vRtrPimNgIfRxUnknownPdus Counter32
  vRtrPimNgIfRxJoinPruneErrs Counter32
  vRtrPimNgIfRxBSMNoRouterAlertDrops Counter32
  vRtrPimNgIfRxBSMWrongIfDrops Counter32
  vRtrPimNgIfMcacPolicyDrops Counter32
  vRtrPimNgIfTxIntraASAD Counter32
  vRtrPimNgIfRxIntraASAD Counter32
  vRtrPimNgIfRxIntraASADErrs Counter32
  vRtrPimNgIfTxInterASAD Counter32
  vRtrPimNgIfRxInterASAD Counter32
  vRtrPimNgIfRxInterASADErrs Counter32
  vRtrPimNgIfTxSpmsiAD Counter32
  vRtrPimNgIfRxSpmsiAD Counter32
  vRtrPimNgIfRxSpmsiADErrs Counter32
  vRtrPimNgIfTxLeafAD Counter32
  vRtrPimNgIfRxLeafAD Counter32
  vRtrPimNgIfRxLeafADErrs Counter32
  vRtrPimNgIfTxSrcActAD Counter32
  vRtrPimNgIfRxSrcActAD Counter32
  vRtrPimNgIfTxSrcActADErrs Counter32
  vRtrPimNgIfTxSharedTreeJoin Counter32
  vRtrPimNgIfRxSharedTreeJoin Counter32
  vRtrPimNgIfRxSharedTreeJoinErrs Counter32
  vRtrPimNgIfTxSrcTreeJoin Counter32
  vRtrPimNgIfRxSrcTreeJoin Counter32
  vRtrPimNgIfRxSrcTreeJoinErrs Counter32
  vRtrPimNgIfTxBgpPkts Counter32
  vRtrPimNgIfRxBgpPkts Counter32
  vRtrPimNgIfTxMdtSafi Counter32
  vRtrPimNgIfRxMdtSafi Counter32
  vRtrPimNgIfRxMdtSafiErrs Counter32
  vRtrPimNgIfRxAutoRpGenErrs Counter32
  vRtrPimNgIfRxAutoRpAnnounce Counter32
  vRtrPimNgIfTxAutoRpAnnounce Counter32
  vRtrPimNgIfRxAutoRpAnnounceErrs Counter32
  vRtrPimNgIfTxAutoRpAnnounceErrs Counter32
  vRtrPimNgIfRxAutoRpMapping Counter32
  vRtrPimNgIfTxAutoRpMapping Counter32
  vRtrPimNgIfRxAutoRpMappingErrs Counter32
  vRtrPimNgIfTxAutoRpMappingErrs Counter32

VRtrPimNgDataMtEntry  
SEQUENCE    
  vRtrPimNgDataMtMdSourceAddrType InetAddressType
  vRtrPimNgDataMtMdSourceAddress InetAddress
  vRtrPimNgDataMtMdGroupAddrType InetAddressType
  vRtrPimNgDataMtMdGroupAddress InetAddress
  vRtrPimNgDataMtIfIndex InterfaceIndex
  vRtrPimNgDataMtUptime Unsigned32
  vRtrPimNgDataMtNumVpnSGs Unsigned32

VRtrPimNgDataMtCGrpSrcEntry  
SEQUENCE    
  vRtrPimNgDataMtCGrpSrcGrpAdType InetAddressType
  vRtrPimNgDataMtCGrpSrcGroupAddr InetAddress
  vRtrPimNgDataMtCGrpSrcSrcAdType InetAddressType
  vRtrPimNgDataMtCGrpSrcSrcAddr InetAddress
  vRtrPimNgDataMtCGrpSrcState INTEGER
  vRtrPimNgDataMtCGrpSrcJoinTimer Unsigned32
  vRtrPimNgDataMtCGrpSrcHolddownTimer Unsigned32
  vRtrPimNgDataMtCGrpSrcExpiryTimer Unsigned32
  vRtrPimNgDataMtCGrpSrcUptime Unsigned32
  vRtrPimNgDataMtCGrpSrcDataMtThreshold Unsigned32
  vRtrPimNgDataMtCGrpSrcIfIndex InterfaceIndex

VRtrPimNgAnycastRPEntry  
SEQUENCE    
  vRtrPimNgAnycastRPAddressType InetAddressType
  vRtrPimNgAnycastRPAddress InetAddress
  vRtrPimNgAnycastRPPeerAddrType InetAddressType
  vRtrPimNgAnycastRPPeerAddress InetAddress
  vRtrPimNgAnycastRPRowStatus RowStatus
  vRtrPimNgAnycastRPRowLstChanged TimeStamp

VRtrPimNgSptSwitchoverThdEntry  
SEQUENCE    
  vRtrPimNgSptSwOvrThdTblGpAdType InetAddressType
  vRtrPimNgSptSwOvrThdTblGrpAddr InetAddress
  vRtrPimNgSptSwOvrThdTblGpAdMask InetAddressPrefixLength
  vRtrPimNgSptSwovrThdRowStatus RowStatus
  vRtrPimNgSptSwovrThdRowLstChngd TimeStamp
  vRtrPimNgSptSwitchoverThd Unsigned32

VRtrPimNgDataMtThdEntry  
SEQUENCE    
  vRtrPimNgDataMtThdTblGrpAdrType InetAddressType
  vRtrPimNgDataMtThdTblGrpAddr InetAddress
  vRtrPimNgDataMtThdTblGrpAdrMask InetAddressPrefixLength
  vRtrPimNgDataMtThdRowStatus RowStatus
  vRtrPimNgDataMtThdRowLstChngd TimeStamp
  vRtrPimNgDataMtThd Unsigned32

VRtrPimNgIfMcacLevelEntry  
SEQUENCE    
  vRtrPimNgIfMcacLevelRowStatus RowStatus
  vRtrPimNgIfMcacLvlRowLstChngd TimeStamp
  vRtrPimNgIfMcacLevelBW Unsigned32

VRtrPimNgIfMcacLagEntry  
SEQUENCE    
  vRtrPimNgIfMcacLagRowStatus RowStatus
  vRtrPimNgIfMcacLagRowLstChngd TimeStamp
  vRtrPimNgIfMcacLagLevel Unsigned32

VRtrPimNgERPGrpPrefixEntry  
SEQUENCE    
  vRtrPimNgERPGrpPrfixGrpAddrType InetAddressType
  vRtrPimNgERPGrpPrefixGrpAddr InetAddress
  vRtrPimNgERPGrpPrefixGrpMask InetAddressPrefixLength
  vRtrPimNgERPGrpPrefixRowStatus RowStatus

VRtrPimNgRsvpIfEntry  
SEQUENCE    
  vRtrPimNgRsvpIfLspName TNamedItem
  vRtrPimNgRsvpIfSenderAddrType InetAddressType
  vRtrPimNgRsvpIfSenderAddr InetAddress
  vRtrPimNgRsvpIfRowStatus RowStatus
  vRtrPimNgRsvpIfOperState TmnxOperState
  vRtrPimNgRsvpIfIndex InterfaceIndex

VRtrPimNgCRPGrpPrefixInetEntry  
SEQUENCE    
  vRtrPimNgCRPGrpPfxInetGrpAdrType InetAddressType
  vRtrPimNgCRPGrpPrefixInetGrpAddr InetAddress
  vRtrPimNgCRPGrpPrefixInetGrpMask InetAddressPrefixLength
  vRtrPimNgCRPGrpPrfxInetRowStatus RowStatus
  vRtrPimNgCRPGrpPfxInetRowLstChgd TimeStamp

VRtrPimNgCRPInetEntry  
SEQUENCE    
  vRtrPimNgCRPInetAddressType InetAddressType
  vRtrPimNgCRPInetAddress InetAddress
  vRtrPimNgCRPInetGrpAddrType InetAddressType
  vRtrPimNgCRPInetGrpAddr InetAddress
  vRtrPimNgCRPInetGrpMask InetAddressPrefixLength
  vRtrPimNgCRPInetHoldtime Integer32
  vRtrPimNgCRPInetPriority Integer32
  vRtrPimNgCRPInetExpiryTime Integer32

VRtrPimNgRPSetInetEntry  
SEQUENCE    
  vRtrPimNgRPSetInetType INTEGER
  vRtrPimNgRPSetInetGrpAddrType InetAddressType
  vRtrPimNgRPSetInetGrpAddr InetAddress
  vRtrPimNgRPSetInetGrpMask InetAddressPrefixLength
  vRtrPimNgRPSetInetCRPAddrType InetAddressType
  vRtrPimNgRPSetInetCRPAddress InetAddress
  vRtrPimNgRPSetInetHoldtime Integer32
  vRtrPimNgRPSetInetPriority Integer32
  vRtrPimNgRPSetInetExpiryTime Unsigned32

VRtrPimNgIfSecNbrEntry  
SEQUENCE    
  vRtrPimNgIfSecNbrAddrType InetAddressType
  vRtrPimNgIfSecNbrAddress InetAddress

VRtrPimNgRsvpPmsiEntry  
SEQUENCE    
  vRtrPimNgRsvpPmsiExtTunlAdrType InetAddressType
  vRtrPimNgRsvpPmsiExtTunnelAddr InetAddress
  vRtrPimNgRsvpPmsiTunnelId Unsigned32
  vRtrPimNgRsvpPmsiP2MPId Unsigned32
  vRtrPimNgRsvpPmsiIfIndex InterfaceIndex
  vRtrPimNgRsvpPmsiUptime Unsigned32
  vRtrPimNgRsvpPmsiNumVpnSGs Unsigned32
  vRtrPimNgRsvpPmsiIfType INTEGER

VRtrPimNgRsvpPmsiCGrpSrcEntry  
SEQUENCE    
  vRtrPimRsvpPmsiCGrpSrcGrpAdType InetAddressType
  vRtrPimRsvpPmsiCGrpSrcGrpAddr InetAddress
  vRtrPimRsvpPmsiCGrpSrcSrcAdType InetAddressType
  vRtrPimRsvpPmsiCGrpSrcSrcAddr InetAddress
  vRtrPimRsvpPmsiCGrpSrcState INTEGER
  vRtrPimRsvpPmsiCGrpSrcJoinTimer Unsigned32
  vRtrPimRsvpPmsiCGrpSrcHldDnTimer Unsigned32
  vRtrPimRsvpPmsiCGrpSrcExpTimer Unsigned32
  vRtrPimRsvpPmsiCGrpSrcUptime Unsigned32
  vRtrPimDataMtCGrpSrcDataThresh Unsigned32
  vRtrPimRsvpPmsiCGrpSrcIfIndex InterfaceIndex

VRtrPimNgLdpPmsiEntry  
SEQUENCE    
  vRtrPimNgLdpPmsiRootAddrType InetAddressType
  vRtrPimNgLdpPmsiRootAddr InetAddress
  vRtrPimNgLdpPmsiLspId Unsigned32
  vRtrPimNgLdpPmsiIfIndex InterfaceIndex
  vRtrPimNgLdpPmsiUptime Unsigned32
  vRtrPimNgLdpPmsiNumVpnSGs Unsigned32
  vRtrPimNgLdpPmsiIfType INTEGER

VRtrPimNgLdpPmsiCGrpSrcEntry  
SEQUENCE    
  vRtrPimLdpPmsiCGrpSrcGrpAdType InetAddressType
  vRtrPimLdpPmsiCGrpSrcGrpAddr InetAddress
  vRtrPimLdpPmsiCGrpSrcSrcAdType InetAddressType
  vRtrPimLdpPmsiCGrpSrcSrcAddr InetAddress
  vRtrPimLdpPmsiCGrpSrcState INTEGER
  vRtrPimLdpPmsiCGrpSrcJoinTimer Unsigned32
  vRtrPimLdpPmsiCGrpSrcHldDnTimer Unsigned32
  vRtrPimLdpPmsiCGrpSrcExpTimer Unsigned32
  vRtrPimLdpPmsiCGrpSrcUptime Unsigned32
  vRtrPimLdpDataMtCGrpSrcDataThres Unsigned32
  vRtrPimLdpPmsiCGrpSrcIfIndex InterfaceIndex

VRtrPimNgGrpSrcHostEntry  
SEQUENCE    
  vRtrPimNgGrpSrcHostAddrType InetAddressType
  vRtrPimNgGrpSrcHostAddress InetAddress
  vRtrPimNgGrpSrcHostFlags BITS

VRtrPimNgGrpSrcGrpIfEntry  
SEQUENCE    
  vRtrPimNgGrpSrcGrpIfFwdSvcId TmnxServId
  vRtrPimNgGrpSrcGrpIfIndex InterfaceIndex
  vRtrPimNgGrpSrcGrpIfFlags BITS

VRtrPimNgMvpnUMHPEEntry  
SEQUENCE    
  vRtrPimNgMvpnUMHPEAddrType InetAddressType
  vRtrPimNgMvpnUMHPEAddr InetAddress
  vRtrPimNgMvpnUMHPERowStatus RowStatus
  vRtrPimNgMvpnUMHPELastChanged TimeStamp
  vRtrPimNgMvpnUMHPEStandbyAdrTyp InetAddressType
  vRtrPimNgMvpnUMHPEStandbyAddr InetAddress

VRtrPimNgRsvpIPmsiEntry  
SEQUENCE    
  vRtrPimNgRsvpIPmsiExtTunlAdrType InetAddressType
  vRtrPimNgRsvpIPmsiExtTunnelAddr InetAddress
  vRtrPimNgRsvpIPmsiLspName TNamedItem
  vRtrPimNgRsvpIPmsiP2MPId Unsigned32
  vRtrPimNgRsvpIPmsiTunnelId Unsigned32

VRtrPimNgLdpIPmsiEntry  
SEQUENCE    
  vRtrPimNgLdpIPmsiRootAddrType InetAddressType
  vRtrPimNgLdpIPmsiRootAddr InetAddress
  vRtrPimNgLdpIPmsiLspId Unsigned32
  vRtrPimNgLdpIPmsiLspName TNamedItem

VRtrPimNgMvpnExtranetEntry  
SEQUENCE    
  vRtrPimNgMvpnExtranetNHAddrType InetAddressType
  vRtrPimNgMvpnExtranetNHAddr InetAddress
  vRtrPimNgMvpnExtranetRD TmnxVPNRouteDistinguisher
  vRtrPimNgMvpnExtranetSrcMvpn Unsigned32
  vRtrPimNgMvpnExtranetRecvMvpn Unsigned32
  vRtrPimNgMvpnExtranetRecvRefCnt Unsigned32

Defined Values

timetraPimNgMIBModule 1.3.6.1.4.1.6527.1.1.3.50
This document is the SNMP MIB module to manage and provision the extensions to the PIM routing protocol for the Alcatel-Lucent SROS device. Copyright 2008-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxPimNgObjs 1.3.6.1.4.1.6527.3.1.2.50
OBJECT IDENTIFIER    

vRtrPimNgProtocolObjs 1.3.6.1.4.1.6527.3.1.2.50.1
OBJECT IDENTIFIER    

vRtrPimNgIfObjs 1.3.6.1.4.1.6527.3.1.2.50.2
OBJECT IDENTIFIER    

vRtrPimNgNotificationObjs 1.3.6.1.4.1.6527.3.1.2.50.3
OBJECT IDENTIFIER    

tmnxPimNgConformance 1.3.6.1.4.1.6527.3.1.1.50
OBJECT IDENTIFIER    

vRtrPimNgNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.50
OBJECT IDENTIFIER    

vRtrPimNgNotifications 1.3.6.1.4.1.6527.3.1.3.50.0
OBJECT IDENTIFIER    

vRtrPimNgGeneralTableLstChanged 1.3.6.1.4.1.6527.3.1.2.50.1.1
The value of vRtrPimNgGeneralTableLstChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgGeneralTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgGeneralTable 1.3.6.1.4.1.6527.3.1.2.50.1.2
The vRtrPimNgGeneralTable contains objects for general control and management of the PIM protocol instance within a virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGeneralEntry

vRtrPimNgGeneralEntry 1.3.6.1.4.1.6527.3.1.2.50.1.2.1
Each row entry represents an instance of the PIM protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations. An entry in this table is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is set to 'create'. The entry is destroyed when vRtrPimStatus is set to 'delete'
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGeneralEntry  

vRtrPimNgGenRowLastChanged 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.1
The value of vRtrPimNgGenRowLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgGenAdminState 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.2
The value of vRtrPimNgGenAdminState specifies the current administrative state of this PIM protocol instance on this virtual router. When vRtrPimNgGenAdminState is set to 'inService', the agent attempts to enable the PIM protocol instance on this virtual router. When vRtrPimNgGenAdminState is set to 'outOfService', the agent attempts to disable the PIM protocol instance on this router.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgGenOperState 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.3
The value of vRtrPimNgGenOperState indicates the current operating state of this PIM protocol instance on this router.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrPimNgGenCreateInterfaces 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.4
The value of vRtrPimNgGenCreateInterfaces specifies the PIM interfaces with default parameters. Setting the value of this object to 'ies' creates all IES interfaces in PIM. When the value of vRtrPimNgGenCreateInterfaces is set to 'all', all IES and non IES interfaces are created in PIM. When the value of vRtrPimNgGenCreateInterfaces is set to 'none', all interfaces that are not manually created or modified are removed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ies(1), non-ies(2), all(3), none(4)  

vRtrPimNgGenMaxMdts 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.5
The value of vRtrPimNgGenMaxMdts indicates the maximum number of Multicast Distribution Trees (MDTs) that can be configured on the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgGenNonDrAttractTraffic 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.6
The value of vRtrPimNgGenNonDrAttractTraffic specifies whether the router should ignore the designated router state and attract traffic even when it is not the designated router. If the value is 'true', the DR state is ignored, and if it's 'false', the DR value is honored.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgGenEcmpBalance 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.7
The value of vRtrPimNgGenEcmpBalance specifies whether the multicast balancing of traffic over ECMP links is enabled or not. If the value of vRtrPimNgGenEcmpBalance is 'true', each and every multicast stream that needs to be forwarded over an ECMP link will be re-evaluated for the total multicast bandwidth utilization. Re-evaluation will happen on the ECMP interface in question. The value of vRtrPimNgGenEcmpBalance is mutually exclusive with the value of vRtrPimNgGenEcmpHashingEnabled in the same context. An 'inconsistentValue' error is returned when an attempt is made to set the value of vRtrPimNgGenEcmpBalance to 'true' when the value of vRtrPimNgGenEcmpHashingEnabled is set to 'true'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgGenEcmpBalanceHoldTime 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.8
The value of vRtrPimNgGenEcmpBalanceHoldTime specifies the hold time in minutes that applies after an interface has been added to the ECMP link.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..600  

vRtrPimNgGenEcmpReBlncInProg 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.9
The value of vRtrPimNgGenEcmpReBlncInProg indicates whether or not multicast ECMP re-balancing is currently in progress or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgGenEcmpLastReBlncTime 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.10
The value of vRtrPimNgGenEcmpLastReBlncTime indicates the time when the last re-balancing occurred if the value of vRtrPimNgGenEcmpReBlncInProg is 'false'.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgGenEcmpRebalanceType 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.11
The value of vRtrPimNgGenEcmpRebalanceType indicates the type of ECMP rebalance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER triggered(1), operatorForced(2)  

vRtrPimNgGenEcmpOptThreshold 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.12
The value of vRtrPimNgGenEcmpOptThreshold indicates the optional threshold value for ECMP balancing. This object was obsoleted from release 6.0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGenEcmpNextBalanceTime 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.13
The value of vRtrPimNgGenEcmpNextBalanceTime specifies how much time is remaining until the next rebalance would occur.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..600  

vRtrPimNgGenLagUsageOptimize 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.14
The value of vRtrPimNgGenLagUsageOptimize specifies whether the router should optimize usage of the LAG such that traffic for a given multicast stream destined to an IP interface using the LAG is sent only to the forwarding complex that owns the LAG link on which it will actually be forwarded. If this optimization is turned off, the traffic will be sent to all the forwarding complexes that own at least one link in the LAG. Changing the value of this object causes the PIM protocol to be restarted.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgGenEcmpHashingEnabled 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.15
The value of vRtrPimNgGenEcmpHashingEnabled specifies whether or not the multicast balancing of traffic over ECMP links is hash based. If vRtrPimNgGenEcmpHashingEnabled is 'true' then the multicast balancing of traffic over ECMP links is done based on Upstream Multicast Hop(UMH) algorithm. The value of vRtrPimNgGenEcmpHashingEnabled is mutually exclusive with the value of vRtrPimNgGenEcmpBalance in the same context. An 'inconsistentValue' error is returned when an attempt is made to set the value of vRtrPimNgGenEcmpHashingEnabled to 'true' when the value of vRtrPimNgGenEcmpBalance is set to 'true'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgGenEnableMdtSpt 1.3.6.1.4.1.6527.3.1.2.50.1.2.1.16
The value of vRtrPimNgGenEnableMdtSpt specifies whether or not Shortest Path Tree(SPT) switchover is enabled for the default Multicast Data Tunnel(MDT). If set to 'true' then SPT switchover is enabled and if set to 'false' SPT switchover is disabled. Additionally, whenever we change the value of 'vRtrPimNgGenEnableMdtSpt', the PIM instance must reset all MDTs and re-initiate setup.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAFGenTableLstChanged 1.3.6.1.4.1.6527.3.1.2.50.1.3
The value of vRtrPimNgAFGenTableLstChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgAFGenTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgAFGenTable 1.3.6.1.4.1.6527.3.1.2.50.1.4
The vRtrPimNgAFGenTable contains objects for general control and management of the PIM protocol instance within a virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgAFGenEntry

vRtrPimNgAFGenEntry 1.3.6.1.4.1.6527.3.1.2.50.1.4.1
Each row entry represents an instance of the PIM protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations. An entry in this table is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is set to 'create'. The entry is destroyed when vRtrPimStatus is set to 'delete'
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgAFGenEntry  

vRtrPimNgAFGenAFType 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.1
The value of vRtrPimNgAFGenAFType indicates the address family type supported by the PIM on this instance of router.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMulticastAddrFamily  

vRtrPimNgAFGenAdminState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.2
The value of vRtrPimNgAFGenAdminState specifies the current administrative state of this PIM protocol instance associated with this address family on this virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgAFGenOperState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.3
The value of vRtrPimNgAFGenOperState indicates the current operating state of this PIM protocol instance associated with this address family on this router.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrPimNgAFGenCBSRPriority 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.4
The value of vRtrPimNgAFGenCBSRPriority specifies whether the router is eligible to be a bootstrap router. If the value of this object is set to zero, the router does not participate in the bootstrap election. The highest priority is 255.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

vRtrPimNgAFGenCBSRAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.5
The value of vRtrPimNgAFGenCBSRAddressType specifies the type of address of the Candidate Bootstrap Router(CBSR).
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAFGenCBSRAddress 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.6
The value of vRtrPimNgAFGenCBSRAddress specifies the type of address of the Candidate Bootstrap Router(CBSR). To participate in the bootstrap election, the router sends bootstrap messages(BSM). These messages carry the BSR address of the router.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgAFGenCBSRAdminState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.7
The value of vRtrPimNgAFGenCBSRAdminState is used to administratively enable or disable participating in the Bootstrap election. Even if the value of this object is set to 'inService', if the vRtrPimNgAFGenCBSRAddress is not set or vRtrPimNgAFGenCBSRPriority is zero, bootstrap messages will not be sent.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgAFGenCBSROperState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.8
The value of vRtrPimNgAFGenCBSROperState indicates the operational status of the Bootstrap mechanism. If the value of vRtrPimNgAFGenCBSROperState is 'outOfService', it could be because the router interface corresponding to vRtrPimNgAFGenCBSRAddress is down or PIM is not enabled on that interface or vRtrPimNgAFGenCBSRPriority is zero.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrPimNgAFGenBSRAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.9
The value of vRtrPimNgAFGenBSRAddressType indicates the type of address of the elected bootstrap router.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAFGenBSRAddress 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.10
The value of vRtrPimNgAFGenBSRAddress indicates the address of the elected bootstrap router.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgAFGenBSRPriority 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.11
The value of vRtrPimNgAFGenBSRPriority indicates the priority of the elected bootstrap router. Higher value means higher priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

vRtrPimNgAFGenBSRExpiryTime 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.12
The value of vRtrPimNgAFGenBSRExpiryTime indicates the minimum time remaining before the elected bootstrap router will be declared down if the value of vRtrPimNgAFGenBSRState is not 'electedBSR'. The value of vRtrPimNgAFGenBSRExpiryTime indicates the time remaining before the router sends the next Bootstrap Message(BSM) if the value of vRtrPimNgAFGenBSRState is 'electedBSR'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgAFGenBSRState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.13
The value of vRtrPimNgAFGenBSRState indicates the state of the router with respect to the bootstrap mechanism. 'candidateBSR', 'pendingBSR' and 'electedBSR' are the states of the router participating in the Bootstrap election. 'acceptAny' and 'acceptPreferred' are the states of the router not participating in the Bootstrap election.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), candidateBSR(1), pendingBSR(2), electedBSR(3), acceptAny(4), acceptPreferred(5)  

vRtrPimNgAFGenBSRUpTime 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.14
The value of vRtrPimNgAFGenBSRUpTime indicates the time since the current E-BSR became the elected BSR.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgAFGenCRPAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.15
The value of vRtrPimNgAFGenCRPAddressType specifies the type of address of the local RP address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAFGenCRPAddress 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.16
The value of vRtrPimNgAFGenCRPAddress specifies the local RP address. This address is sent in the C-RP Advertisements to the bootstrap router.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgAFGenCRPAdminState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.17
The value of vRtrPimNgAFGenCRPAdminState specifies whether to enable or disable sending C-RP Advertisements to the BSR administratively. Even if the value of the object is set to 'inService', if the vRtrPimNgAFGenCRPAddress is not set, C-RP messages will not be sent to the bootstrap router.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgAFGenCRPOperState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.18
The value of vRtrPimNgAFGenCRPOperState indicates the operational status of the C-RP mechanism. If the router is sending C-RP-Adv messages, the value of this object will be 'inService'.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrPimNgAFGenCRPHoldtime 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.19
The value of vRtrPimNgAFGenCRPHoldtime specifies the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 5..255  

vRtrPimNgAFGenCRPPriority 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.20
The value of vRtrPimNgAFGenCRPPriority specifies the router's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

vRtrPimNgAFGenMdtDefGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.21
The value of vRtrPimNgAFGenMdtDefGrpAddrType specifies the type of default core group address of the Multicast Distribution Tree(MDT) for the VPRN instance.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAFGenMdtDefGrpAddress 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.22
The value of vRtrPimNgAFGenMdtDefGrpAddress specifies the default core group address of the Multicast Distribution Tree(MDT) for the VPRN instance. All the customer PIM control is sent in the service provider network using the default group address. Customer data traffic for which a Data MDT is not used is also sent on the default tunnel. The Multicast Tunnel(MT) interface for a VPRN is created when this object is set to a valid group address. The MT interface is deleted when the object is reset to its default value. The value of this object is not applicable when the value of vRtrPimNgAFGenMvpnGrpAddrMode is set to 'none'.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgAFGenMTIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.23
The value of vRtrPimNgAFGenMTIfIndex indicates the interface index of the Multicast Tunnel(MT) interface. MT interface is created when vRtrPimNgAFGenMdtDefGrpAddress is configured with the default core group address.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrPimNgAFGenCBSRHashMaskLen 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.24
The value of vRtrPimNgAFGenCBSRHashMaskLen specifies the length of a mask that is to be ANDed with the group address before the hash function is called. All groups with the same hash map to the same RP. For example, if this value is 24, only the first 24 bits of the group addresses matter. This mechanism is used to map one group or multiple groups to a RP. Default values are 30 and 126 for ipv4 and ipv6 group addresses respectively.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..128  

vRtrPimNgAFGenBSRHashMaskLen 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.25
The value of vRtrPimNgAFGenBSRHashMaskLen indicates the hash mask length of the elected BSR.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgAFGenBSRRpfIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.26
The value of vRtrPimNgAFGenBSRRpfIfIndex indicates the RPF interface towards the elected BSR. The value of this object will be zero if there is no elected BSR in the network.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrPimNgAFGenRpfLookupSequence 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.27
The value of vRtrPimNgAFGenRpfLookupSequence specifies the sequence of route tables that PIM uses for finding a Reverse Path Forwarding(RPF) interface for a particular multicast route. 'mucastRouteTable' is the unicast route table to be used only by multicast protocols(PIM) which will contain routes submitted by multi-protocol BGP, ISIS and OSPF. 'ucastRouteTable' is the regular unicast route table which will contain routes submitted by all the unicast routing protocols. By default, only the 'ucastRouteTable' is looked up by PIM for calculating RPF interface towards the source or rendezvous point. However the operator can specify the following: a) Use unicast route table only b) Use multicast unicast route table only or c) Use both the route tables. In case of (c), PIM will always lookup first in the 'mucastRouteTable' and if there is a route, it will use it. If PIM does not find a route in the first lookup, it will try to find it in the 'ucastRouteTable'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER mucastRouteTable(0), ucastRouteTable(1), both(2)  

vRtrPimNgAFGenMdtDataPrefixType 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.28
The value of vRtrPimNgAFGenMdtDataPrefixType specifies the address type of vRtrPimNgAFGenMdtDataPrefix address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAFGenMdtDataPrefix 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.29
The value of vRtrPimNgAFGenMdtDataPrefix specifies the address used to configure the pool of multicast addresses in the service provider instance that can be used to generate data only 'Multicast Distribution Tree'(MDT) tunnels. A Service Provider(SP) determines whether a particular VPN is multicast-enabled. If it is, it corresponds to a 'Multicast Domain'(MD). For each Multicast Domain, there is a default MDT through the backbone, connecting all of the PEs that belong to that MD. The configured prefix determines the maximum number of data MDT tunnels that can be generated for the VPRN. Once this pool is exhausted, additional (VPN-S,G) are bound to one of the in-use data MDTs i.e. there could be multiple (VPN-S,G) entries bound to the same data MDT when we exhaust this pool. The value of this object is not applicable when the value of vRtrPimNgAFGenMdtDataGrpAddrMode is set to 'none'.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgAFGenMdtDataPrefixMask 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.30
The value of vRtrPimNgAFGenMdtDataPrefixMask specifies the IP address prefix used to configure the group address vRtrPimNgAFGenMdtDataPrefix.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgAFGenMdtDataDlayIntrvl 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.31
The value of vRtrPimNgAFGenMdtDataDlayIntrvl specifies the interval before the Provider Edge(PE) router connected to the source switches traffic from default Multicast Distribution Tree(MDT) to the Data MDT group. The default value is 3 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 3..180  

vRtrPimNgAFGenMdtDataJoinTlvPck 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.32
The value of vRtrPimNgAFGenMdtDataJoinTlvPck specifies if packing of MDT Join TLVs is enabled. If multiple Join TLVs are available at the time they are transmitted, the TLVs are packed into a single UDP PDU instead of sending each one in a separate UDP PDU. In scaling scenarios, this packing makes more efficient use of packet buffers and helps in better convergence. The default value is 'true'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAFGenRowLastChanged 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.33
The value of vRtrPimNgAFGenRowLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgAFGenERP 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.34
The value of vRtrPimNgAFGenERP specifies if multicast messages are checked for embedded RP information. When vRtrPimNgAFGenERP has a value of 'true', embedded RP is enabled and users can configure group ranges where embedded RP information will be used. When the value of vRtrPimNgAFGenERP is set to 'false', embedded RP is disabled, administratively shutdown and user configured group ranges (entries in vRtrPimNgERPGrpPrefixTable) will be deleted.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAFGenERPAdminState 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.35
The value of vRtrPimNgAFGenERPAdminState specifies whether to administratively enable or disable checking messages for embedded RP information. Value of vRtrPimNgAFGenERPAdminState is set to 'outOfService' when the value of vRtrPimNgAFGenERP is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgAFGenMvpnAutoDiscovery 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.36
The value of vRtrPimNgAFGenMvpnAutoDiscovery specifies if auto-discovery via BGP is enabled. When auto-discovery is enabled, PIM peering on the inclusive provider tunnel is disabled. This object is obsoleted and replaced with vRtrPimNgAFGenMvpnAD object in 9.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAFGenMvpnCMcastSignal 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.37
The value of vRtrPimNgAFGenMvpnCMcastSignal specifies which protocol to use, BGP or PIM, for PE-to-PE signaling of CE multicast states. When vRtrPimNgAFGenMvpnCMcastSignal is set to 'pim' and neighbor discovery via BGP is disabled, PIM peering will be enabled on the inclusive tree.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER bgp(0), pim(1)  

vRtrPimNgAFGenMvpnGrpAddrMode 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.38
The value of vRtrPimNgAFGenMvpnGrpAddrMode specifies which PIM mode to use, ASM or SSM, for PIM based inclusive provider tunnels.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), asm(1), ssm(2)  

vRtrPimNgAFGenMvpnSpmsiAutoDisc 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.39
The value of vRtrPimNgAFGenMvpnSpmsiAutoDisc specifies if auto-discovery-disable via BGP is disabled. When the value of vRtrPimNgAFGenMvpnSpmsiAutoDisc is set to 'true', then C-trees to P-tunnels binding auto-discovery via BGP is disabled and it is signaled using PIM join TLVs.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAFGenMvpnUMHSelection 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.40
The value of vRtrPimNgAFGenMvpnUMHSelection specifies the selection mechanism to use for selecting Upstream Multicast Hop(UMH). When the value of vRtrPimNgAFGenMvpnUMHSelection is set to 'highestip', the highest IP Address is selected as UMH. When the value is set to 'hashbased', UMH selection is based on the hash based procedures. When the value is set to 'tunnelstatus', UMH selection is based on the state of the tunnel as well as the available unicast routes through the tunnel. UMH selection is supported only with RSVP-TE PMSI. Its value cannot be modified without shutting down the MVPN instance.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER highestip(0), hashbased(1), tunnelstatus(2)  

vRtrPimNgAFGenMvpnIntersiteShrd 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.41
The value of vRtrPimNgAFGenMvpnIntersiteShrd specifies whether to use inter-site shared C-trees or not. When the value of vRtrPimNgAFGenMvpnIntersiteShrd is set to 'enabled', the use of inter-site shared C-trees is enabled. When the value is set to 'disabled', the use of inter-site shared C-trees is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrPimNgAFGenSSMDefRangeDisabl 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.42
The value of vRtrPimNgAFGenSSMDefRangeDisabl specifies whether to disable the use of default range (232/8) for SSM so that it can be used by ASM to process (*,G). When the value of vRtrPimNgAFGenSSMDefRangeDisabl is set to 'true', the use of default range is disabled for SSM and it can be used by ASM. When the value is set to 'false', the SSM default range is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAFGenMvpnAD 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.43
The value of vRtrPimNgAFGenMvpnAD specifies the auto-discovery mechanism to be used for discovering peers using BGP. When the value of vRtrPimNgAFGenMvpnAD is set to 'none(0)', auto-discovery via BGP is disabled. When the value is set to 'default(1)', auto-discovery via BGP is enabled using default IPMSI AD format. When the value is set to 'mdtSafi(2)', auto-discovery via BGP is enabled using MDT-SAFI format. A MDT-SAFI address is a 16-byte value consisting of 12-byte route distinguisher(RD) followed by a 4-byte group address. An 'inconsistentValue' error is returned if this object is set to non-default value, when the value of TIMETRA-VRTR-MIB::vRtrInterASMvpn is 'true'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), default(1), mdtSafi(2)  

vRtrPimNgAFGenMdtDataGrpAddrMode 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.44
The value of vRtrPimNgAFGenMdtDataGrpAddrMode specifies which PIM mode to use, ASM or SSM, for PIM based selective provider tunnels.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), asm(1), ssm(2)  

vRtrPimNgAFGenEnableAsmDataMdt 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.45
The value of vRtrPimNgAFGenEnableAsmDataMdt specifies whether RP join on egress is enabled or not. When the value of vRtrPimNgAFGenEnableAsmDataMdt is set to 'true' RP join on egress is enabled. When its value is set to 'false' RP join on egress is disabled and source join is used. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'pim'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAfGenAutoRPDiscovery 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.46
The value of vRtrPimNgAfGenAutoRPDiscovery specifies whether auto RP is enabled in discovery mode for this PIM protocol instance.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgAfGenSSMAsrtCompMode 1.3.6.1.4.1.6527.3.1.2.50.1.4.1.47
The value of vRtrPimNgAfGenSSMAsrtCompMode specifies whether SSM assert is enabled in compatibility mode for this PIM protocol instance. When the value of the object is set to true, for SSM groups, PIM will consider the SPT bit to be implicitly set to compute the value of CouldAssert(S,G,I) as defined in RFC 4601. When the value of the object is set to false, for SSM groups, PIM will not assume the SPT bit to be set. The SPT bit will be set by Update_SPTbit(S,G,iif) macro defined in RFC 4601.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgStaticRPTableLstChnged 1.3.6.1.4.1.6527.3.1.2.50.1.5
The value of vRtrPimNgStaticRPTableLstChnged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgStaticRPTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgStaticRPTable 1.3.6.1.4.1.6527.3.1.2.50.1.6
The table contains a list of statically configured Rendezvous Point (RP) addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgStaticRPEntry

vRtrPimNgStaticRPEntry 1.3.6.1.4.1.6527.3.1.2.50.1.6.1
Each row entry in the vRtrPimNgStaticRPTable represents a statically configured Rendezvous Point(RP). An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgStaticRPRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgStaticRPEntry  

vRtrPimNgStaticRPRPAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.6.1.1
The value of vRtrPimNgStaticRPRPAddressType indicates the type of Rendezvous Point (RP) address indicated by vRtrPimNgStaticRPRPAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgStaticRPRPAddress 1.3.6.1.4.1.6527.3.1.2.50.1.6.1.2
The value of vRtrPimNgStaticRPRPAddress indicates the Rendezvous Point (RP) address that should be used by the router for the range of multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgStaticRPRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.6.1.3
The value of vRtrPimNgStaticRPRowStatus is used to create or destroy entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgStaticRPRowLastChanged 1.3.6.1.4.1.6527.3.1.2.50.1.6.1.4
The value of vRtrPimNgStaticRPRowLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgStaticRPOverride 1.3.6.1.4.1.6527.3.1.2.50.1.6.1.5
The value of vRtrPimNgStaticRPOverride specifies the override on the dynamic group-to-RP mappings learned by the router. When the value of this object is set to 'true', then static group-to-RP mappings take precedence over the dynamically learned mappings.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgStGrptoRPTableLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.7
The value of vRtrPimNgStGrptoRPTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgStGrptoRPTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgStGrptoRPTable 1.3.6.1.4.1.6527.3.1.2.50.1.8
The table contains a list of statically configured Rendezvous Point (RP) addresses for a multicast group range. Entries can be created or destroyed. If this table does not contain any entries, then the multicast group to RP mapping is derived from the RP-Set messages received from the Bootstrap Router. If the vRtrPimNgStaticRPTable does not contain an entry with the specified vRtrID and vRtrPimNgStGrptoRPRPAddress, an entry is implicitly created in the vRtrPimNgStaticRPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgStGrpToRPEntry

vRtrPimNgStGrpToRPEntry 1.3.6.1.4.1.6527.3.1.2.50.1.8.1
Each row entry in the vRtrPimNgStGrptoRPTable represents a group-to-RP mapping which is statically configured. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgStGrpToRPRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgStGrpToRPEntry  

vRtrPimNgStGrptoRPRPAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.8.1.1
The value of vRtrPimNgStGrptoRPRPAddrType indicates the type of Rendezvous Point (RP) address that should be used by the router for the range of multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgStGrptoRPRPAddress 1.3.6.1.4.1.6527.3.1.2.50.1.8.1.2
The value of vRtrPimNgStGrptoRPRPAddress indicates the Rendezvous Point (RP) address that should be used by the router for the range of multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgStaticGroupAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.8.1.3
The value of vRtrPimNgStaticGroupAddrType indicates the type of address indicated by vRtrPimNgStaticGroupAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgStaticGroupAddr 1.3.6.1.4.1.6527.3.1.2.50.1.8.1.4
The value of vRtrPimNgStaticGroupAddr combined with the value of vRtrPimNgStaticGroupMask indicates the range of multicast group addresses for which vRtrPimNgStGrptoRPRPAddress is the Rendezvous Point (RP).
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgStaticGroupMask 1.3.6.1.4.1.6527.3.1.2.50.1.8.1.5
The value of vRtrPimNgStaticGroupMask indicates the mask which is combined with vRtrPimNgStaticGroupAddr to get the range of multicast group addresses for which vRtrPimNgStGrptoRPRPAddress should be used by the router as the Rendezvous Point (RP).
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgStGrpToRPRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.8.1.6
The value of vRtrPimNgStGrpToRPRowStatus is used to create or destroy entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgStGrpToRPRowLstChanged 1.3.6.1.4.1.6527.3.1.2.50.1.8.1.7
The value of vRtrPimNgStGrpToRPRowLstChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgGrpSrcTable 1.3.6.1.4.1.6527.3.1.2.50.1.9
The table listing the IP multicast sources corresponding to the IP multicast groups. This table represents the global PIM source, group database.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGrpSrcEntry

vRtrPimNgGrpSrcEntry 1.3.6.1.4.1.6527.3.1.2.50.1.9.1
An entry in the vRtrPimNgGrpSrcTable. Each entry represents a source address from which receivers are interested or not interested in receiving multicast traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGrpSrcEntry  

vRtrPimNgGrpSrcGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.1
The value of vRtrPimNgGrpSrcGrpAddrType indicates the type of IP multicast group address represented by vRtrPimNgGrpSrcGroupAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcGroupAddress 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.2
The value of vRtrPimNgGrpSrcGroupAddress indicates the IP multicast group address for which this entry contains information. If the vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will be zero and vRtrPimNgGrpSrcSourceAddress will contain the address of the RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcSrcAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.3
The value of vRtrPimNgGrpSrcSrcAddrType indicates the type of IP multicast source address represented by vRtrPimNgGrpSrcSourceAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcSourceAddress 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.4
The value of vRtrPimNgGrpSrcSourceAddress indicates the source address for which this entry contains information. If vRtrPimNgGrpSrcType is 'starG', the value of this object will be zero. If vRtrPimNgGrpSrcType is 'starstarRP', the value of this object will be address of the RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.5
The value of vRtrPimNgGrpSrcType indicates the type of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER starStarRP(0), starG(1), sg(2)  

vRtrPimNgGrpSrcRPAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.6
The value of vRtrPimNgGrpSrcRPAddrType indcates the type of address of the Rendezvous Point(RP).
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcRPAddr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.7
The value of vRtrPimNgGrpSrcRPAddr indicates the address of the Rendezvous Point(RP).
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcRpfNbrAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.8
The value of vRtrPimNgGrpSrcRpfNbrAddrType indicates the type of the address of the RPF neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcRpfNbrAddr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.9
The value of vRtrPimNgGrpSrcRpfNbrAddr indicates the address of the RPF neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcRpfIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.10
The value of vRtrPimNgGrpSrcRpfIfIndex indicates the router's interface index on which the RPF neighbor exists.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrPimNgGrpSrcRptRpfNbrAdrType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.11
The value of vRtrPimNgGrpSrcRptRpfNbrAdrType indicates the type of address of the RPF neighbor on the RPT.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcRptRpfNbrAddr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.12
The value of vRtrPimNgGrpSrcRptRpfNbrAddr indicates the address of the RPF neighbor on the RPT.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcMRIBNHopAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.13
The value of vRtrPimNgGrpSrcMRIBNHopAddrType indicates the type of next hop address towards the RP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcMRIBNextHopAddr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.14
The value of vRtrPimNgGrpSrcMRIBNextHopAddr indicates the next hop address towards the RP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

vRtrPimNgGrpSrcMRIBSrcFlags 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.15
The value of vRtrPimNgGrpSrcMRIBSrcFlags indicates the MRIB information about the source. If the entry is of type 'starG' or 'starStarRP', it will contain information about the RP for this group.
Status: current Access: read-only
OBJECT-TYPE    
  BITS self(0), direct(1), remote(2)  

vRtrPimNgGrpSrcFlags 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.16
The value of vRtrPimNgGrpSrcFlags contains information about the state of the entry. This object is applicable only for (S,G) entries,i.e., when vRtrPimNgGrpSrcType is 'sg'. The (S,G) sptBit is used to distinguish whether to forward on (*,*,RP) or (*,G) or on (S,G) state. It is updated when the (S,G) data comes on the RPF interface towards the source. 'rptPruneDesired' is set according to the PruneDesired(S,G,rpt) algorithm.
Status: current Access: read-only
OBJECT-TYPE    
  BITS sptBit(0), rptPruneDesired(1)  

vRtrPimNgGrpSrcUpstreamJpState 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.17
The value of vRtrPimNgGrpSrcUpstreamJpState indicates the upstream Join-Prune state. This is a result of sending PIM Join-Prune messages towards the source or the RP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notJoined(0), joined(1)  

vRtrPimNgGrpSrcUpstreamJpTimer 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.18
The value of vRtrPimNgGrpSrcUpstreamJpTimer indicates the time remaining before the router sends another Join message to it's upstream neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGrpSrcUstrmRptJpState 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.19
The value of vRtrPimNgGrpSrcUstrmRptJpState indicates the upstream RPT Join-Prune state. (S,G,rpt) Joins and Prunes are (S,G) Joins or Prunes sent on the RP tree with the RPT bit set, either to modify the results of (*,G) Joins, or to override the behavior of other upstream LAN peers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notJoinedStarG(0), notPruned(1), pruned(2)  

vRtrPimNgGrpSrcUstrmRptOvrdeTmr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.20
The value of vRtrPimNgGrpSrcUstrmRptOvrdeTmr indicates the delay to triggered Join(S,G,rpt) messages to prevent implosions of triggered messages. If vRtrPimNgGrpSrcUstrmRptOvrdeTmr has a non-zero value, it means that the router was in 'notPruned' state and it saw a Prune(S,G,rpt) message being sent to RPF'(S,G,rpt). If the router sees a Join(S,G,rpt) override message being sent by some other router on the LAN while the timer is still non-zero, it simply cancels the override timer. If it does not see a Join(S,G,rpt) message, then on expiry of the override timer, it sends it's own Join(S,G,rpt) message to RPF'(S,G,rpt). A similar scenario exists when RPF'(S,G,rpt) changes to become equal to RPF'(*,G).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGrpSrcRegisterState 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.21
The value of vRtrPimNgGrpSrcRegisterState indicates the register state. The register state is kept at the source DR. When the host starts sending multicast packets and if there are no entries programmed for that group, the source DR sends a Register packet to the RP(G). Register state transition happen based on the register stop timer and the response received from the RP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noInfo(0), join(1), joinPending(2), prune(3), nullJoin(4)  

vRtrPimNgGrpSrcRegisterStopTmr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.22
The value of vRtrPimNgGrpSrcRegisterStopTmr indicates the time remaining before the vRtrPimNgGrpSrcRegisterState might transition to a different state. This timer has a non-zero value when the value of vRtrPimNgGrpSrcRegisterState is not 'noInfo'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGrpSrcKeepaliveTimer 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.23
The value of vRtrPimNgGrpSrcKeepaliveTimer is applicable only for (S,G) entries. The (S,G) Keepalive Timer is updated by data being forwarded using this (S,G) forwarding state. It is used to keep (S,G) state alive in the absence of explicit (S,G) Joins.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGrpSrcNumImmediateOif 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.24
The value of vRtrPimNgGrpSrcNumImmediateOif indicates the number of interfaces in the immediate outgoing interface list. An outgoing list can be 'immediate' if it is built directly from the state of the relevant type as indicated by vRtrPimNgGrpSrcType.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcNumInheritedOif 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.25
The value of vRtrPimNgGrpSrcNumInheritedOif indicates the number of interfaces in the inherited outgoing interface list. An 'inherited' list inherits state from other types.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcNumInherRptOif 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.26
The value of vRtrPimNgGrpSrcNumInherRptOif indicates the number of interfaces in the inherited outgoing interface list for (S,G,Rpt).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcNumLclRxInclIf 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.27
The value of vRtrPimNgGrpSrcNumLclRxInclIf indicates the number of interfaces in the local membership include interface list. Local membership is the result of the local membership mechanism (IGMP) running on a interface. Include list contains interfaces which are interested in receiving multicast traffic for this source group entry.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcNumLclRxExclIf 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.28
The value of vRtrPimNgGrpSrcNumLclRxExclIf indicates the number of interfaces in the local membership exclude interface list. Local membership is the result of the local membership mechanism (IGMP) running on the interface. Exclude list contains interfaces which are not interested in receiving multicast traffic for this source group entry.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcNumJoinPruneIf 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.29
The value of vRtrPimNgGrpSrcNumJoinPruneIf indicates the number of interfaces on which the router received a Join or Prune message for this source group combination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcNumLostAssertIf 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.30
The value of vRtrPimNgGrpSrcNumLostAssertIf indicates the number of interfaces on which the router lost assert for this source group combination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcUpTime 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.31
The value of vRtrPimNgGrpSrcUpTime indicates the time since this source group entry got created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGrpSrcNumSGRptPruneOif 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.32
The value of vRtrPimNgGrpSrcNumSGRptPruneOif indicates the number of interfaces on which the router received (S,G,Rpt) prunes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGrpSrcRxRegFrmAnycstRP 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.33
The value of vRtrPimNgGrpSrcRxRegFrmAnycstRP indicates whether a register message for this source group combination was received from the anycast RP and not from the designated router connected to the source. vRtrPimNgGrpSrcRxRegFrmAnycstRP is not applicable when the value of vRtrPimNgGrpSrcType is starStarRP or starG.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgGrpSrcRslvdByRtTblType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.34
The value of vRtrPimNgGrpSrcRslvdByRtTblType indicates which unicast routing table was used to resolve this source group entry. The value of this object will be 'mucastRouteTable' if the source or rendezvous point (RP) is resolved by the multicast-unicast route table. The value of this object will be 'ucastRouteTable' if the source or rendezvous point (RP) is resolved by the unicast route table. The value will be 'none' if the source or RP is unresolved.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), mucastRouteTable(1), ucastRouteTable(2)  

vRtrPimNgGrpSrcCurrFwdingRate 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.35
The value of vRtrPimNgGrpSrcCurrFwdingRate indicates the current forwarding rate being used by a source group(S,G) entry or (*,G) entry, where * means any source entry, for the traffic in bits per second(bps). This forwarding rate is calculated before ingress QoS policing or shaping is applied.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcCurrFwdingOFRate 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.36
The value of vRtrPimNgGrpSrcCurrFwdingOFRate indicates the number of times associated vRtrPimNgGrpSrcCurrFwdingRate counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcCurrFwdingHCRate 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.37
The value of vRtrPimNgGrpSrcCurrFwdingHCRate indicates the current forwarding rate being used by a source group(S,G) entry or (*,G) entry, where * means any source entry, for the traffic in bits per second(bps).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrPimNgGrpSrcGrpSptThreshold 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.38
The value of vRtrPimNgGrpSrcGrpSptThreshold indicates the configured threshold in kilo-bits per second(kbps) for the group to which this (S,G) belongs. For a group G configured with a threshold, switchover to SPT for an (S,G) is attempted only if the (S,G)'s rate exceeds this configured threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGrpSrcGrpAdminBw 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.39
The value of vRtrPimNgGrpSrcGrpAdminBw indicates the administrative bandwidth in kilo-bits per second(kbps) for the group to which this (S,G) belongs.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..40000000  

vRtrPimNgGrpSrcGrpEcmpOptThresh 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.40
The value of vRtrPimNgGrpSrcGrpEcmpOptThresh indicates the optional threshold value for ECMP balancing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

vRtrPimNgGrpSrcSpmsiRpfIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.41
The value of vRtrPimNgGrpSrcSpmsiRpfIfIndex indicates in an MVPN scenario the router's SPMSI interface index, if any, on which the RPF neighbor exists.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrPimNgGrpSrcRpfSecNbrAddrTyp 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.42
The value of vRtrPimNgGrpSrcRpfSecNbrAddrTyp indicates the type of the address of the secondary RPF neighbor. The value of this object is applicable only when the value of the object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus' indicating that the MVPN is configured with source redundancy. When MVPN is configured with source redundancy, MVPN is capable of receiving traffic from two different PE's for the same source.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcRpfSecNbrAddr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.43
The value of vRtrPimNgGrpSrcRpfSecNbrAddr indicates the address of the secondary RPF neighbor. The value of this object is applicable only when the value of the object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus' indicating that the MVPN is configured with source redundancy.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcRpfSecIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.44
The value of vRtrPimNgGrpSrcRpfSecIfIndex indicates the router's interface index on which the secondary RPF neighbor exists. The value of this object is applicable only when the value of the object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus' indicating that the MVPN is configured with source redundancy.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrPimNgGrpSrcAdvtAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.45
The value of vRtrPimNgGrpSrcAdvtAddrType indicates the type of the address of vRtrPimNgGrpSrcAdvtAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcAdvtAddr 1.3.6.1.4.1.6527.3.1.2.50.1.9.1.46
The value of vRtrPimNgGrpSrcAdvtAddr indicates the router address that advertised the route to the source indicated by vRtrPimNgGrpSrcSourceAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcIfTable 1.3.6.1.4.1.6527.3.1.2.50.1.10
This table lists the PIM enabled interfaces for an entry in vRtrPimNgGrpSrcTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGrpSrcIfEntry

vRtrPimNgGrpSrcIfEntry 1.3.6.1.4.1.6527.3.1.2.50.1.10.1
An entry in the vRtrPimNgGrpSrcIfTable. Each entry represents the state of the PIM enabled interface for every vRtrPimNgGrpSrcEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGrpSrcIfEntry  

vRtrPimNgGrpSrcIfFlags 1.3.6.1.4.1.6527.3.1.2.50.1.10.1.1
The value of vRtrPimNgGrpSrcIfFlags indicates the different lists that this interface belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  BITS immediateOifList(0), inheritedOifList(1), inheritedRptOifList(2), localRxInclude(3), localRxExclude(4), joinPruneList(5), lostAssertList(6), sgRptPruneOifList(7)  

vRtrPimNgGrpSrcSpmsiIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.10.1.2
The value of vRtrPimNgGrpSrcSpmsiIfIndex indicates in an MVPN scenario the router's SPMSI interface index, if any, corresponding to the outgoing IPMSI interface.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrPimNgCRPGrpPrfxTblLstChnged 1.3.6.1.4.1.6527.3.1.2.50.1.11
The value of vRtrPimNgCRPGrpPrfxTblLstChnged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgCRPGrpPrefixTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgCRPGrpPrefixTable 1.3.6.1.4.1.6527.3.1.2.50.1.12
vRtrPimNgCRPGrpPrefixTable lists the group prefixes for which the router sends the Candidate RP Advertizement. This table was obsoleted in release 7.0. It is replaced with the vRtrPimNgCRPGrpPrefixInetTable to support ipv6 address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgCRPGrpPrefixEntry

vRtrPimNgCRPGrpPrefixEntry 1.3.6.1.4.1.6527.3.1.2.50.1.12.1
An entry in the vRtrPimNgCRPGrpPrefixTable. Each entry represents the group prefix for which the router sends the Candidate RP Advertizement(CRP-Adv). CRP-Adv messages are sent to the Elected BSR router(E-BSR).
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgCRPGrpPrefixEntry  

vRtrPimNgCRPGrpPrfixGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.12.1.1
The value of vRtrPimNgCRPGrpPrfixGrpAddrType indicates the type of address represented by vRtrPimNgCRPGrpPrefixGrpAddr.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgCRPGrpPrefixGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.12.1.2
The value of vRtrPimNgCRPGrpPrefixGrpAddr combined with the value of vRtrPimNgCRPGrpPrefixGrpMask indicates the range of multicast group addresses for which the router advertizes to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgCRPGrpPrefixGrpMask 1.3.6.1.4.1.6527.3.1.2.50.1.12.1.3
The value of vRtrPimNgCRPGrpPrefixGrpMask indicates the mask which is combined with the value of vRtrPimNgCRPGrpPrefixGrpAddr to get the range of multicast group addresses for which the router advertizes to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddressPrefixLength  

vRtrPimNgCRPGrpPrefixRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.12.1.4
The value of vRtrPimNgCRPGrpPrefixRowStatus is used to create or destroy entries in this table.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgCRPGrpPrfixRowLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.12.1.5
The value of vRtrPimNgCRPGrpPrfixRowLstChngd indicates the sysUpTime when this row was last modified.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgCRPTable 1.3.6.1.4.1.6527.3.1.2.50.1.13
vRtrPimNgCRPTable lists the C-RP's and the group prefixes sent in the C-RP advertisement. vRtrPimNgCRPTable will be empty on all routers except the elected BSR router. This table was obsoleted in release 7.0. It is replaced with the vRtrPimNgCRPInetTable to support ipv6 address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgCRPEntry

vRtrPimNgCRPEntry 1.3.6.1.4.1.6527.3.1.2.50.1.13.1
An entry in the vRtrPimNgCRPTable. It is created when the Elected BSR receives a Candidate-RP Advertizement from the C-RP's.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgCRPEntry  

vRtrPimNgCRPAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.1
The value of vRtrPimNgCRPAddressType indicates the type of address of the Candidate RP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgCRPAddress 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.2
The value of vRtrPimNgCRPAddress indicates the Candidate RP address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgCRPGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.3
The value of vRtrPimNgCRPGrpAddrType indicates the type of the address represented by vRtrPimNgCRPGrpAddr.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgCRPGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.4
The value of vRtrPimNgCRPGrpAddr combined with the value of vRtrPimNgCRPGrpMask indicates the range of multicast group addresses for which vRtrPimNgCRPAddress is the Candidate RP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgCRPGrpMask 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.5
The value of vRtrPimNgCRPGrpMask indicates the mask which is combined with vRtrPimNgCRPGrpAddr to get the range of multicast group addresses for which vRtrPimNgCRPAddress is the Candidate RP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddressPrefixLength  

vRtrPimNgCRPHoldtime 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.6
The value of vRtrPimNgCRPHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgCRPPriority 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.7
The value of vRtrPimNgCRPPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgCRPExpiryTime 1.3.6.1.4.1.6527.3.1.2.50.1.13.1.8
The value of vRtrPimNgCRPExpiryTime indicates the minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgRPSetTable 1.3.6.1.4.1.6527.3.1.2.50.1.14
This table lists the RP Set sent by the Elected BSR in the Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent in case of Auto-RP. It also contains the static entries in vRtrPimNgStGrptoRPTable. The router uses this table to calculate the group-to-RP mappings. This table was obsoleted in release 7.0. It is replaced with the vRtrPimNgRPSetInetTable to support ipv6 address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgRPSetEntry

vRtrPimNgRPSetEntry 1.3.6.1.4.1.6527.3.1.2.50.1.14.1
An entry in the vRtrPimNgRPSetTable. It is created by the elected BSR when it receives the Candidate-RP-Adv messages. Other routers create this entry on receiving Bootstrap Message(BSM) sent by the elected BSR router. It can also be created when a router receives a Mapping message from the Auto-RP Mapping Agent.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgRPSetEntry  

vRtrPimNgRPSetType 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.1
vRtrPimNgRPSetType is an index into this table. It indicates whether the entry was learned through the bootstrap mechanism or if it was statically configured using the vRtrPimNgStGrptoRPTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  INTEGER dynamic(1), static(2), auto-rp(3)  

vRtrPimNgRPSetGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.2
The value of vRtrPimNgRPSetGrpAddrType indicates the type of address represented by vRtrPimNgRPSetGrpAddr.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgRPSetGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.3
The value of vRtrPimNgRPSetGrpAddr, combined with the value of vRtrPimNgRPSetGrpMask, indicates the range of multicast group addresses for which vRtrPimNgRPSetCRPAddress is the Candidate RP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRPSetGrpMask 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.4
vRtrPimNgRPSetGrpMask indicates the mask which is combined with vRtrPimNgRPSetGrpAddr to get the range of multicast group addresses for which vRtrPimNgRPSetCRPAddress is the candidate RP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddressPrefixLength  

vRtrPimNgRPSetCRPAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.5
The value of vRtrPimNgRPSetCRPAddrType indicates the type of address of the Candidate RP address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgRPSetCRPAddress 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.6
The value of vRtrPimNgRPSetCRPAddress indicates the Candidate RP address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRPSetHoldtime 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.7
The value of vRtrPimNgRPSetHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period. The value of vRtrPimNgRPSetHoldtime will be zero for static entries.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgRPSetPriority 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.8
The value of vRtrPimNgRPSetPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority. For static entries, the priority is always 1.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgRPSetExpiryTime 1.3.6.1.4.1.6527.3.1.2.50.1.14.1.9
The value of vRtrPimNgRPSetExpiryTime indicates the minimum time remaining before the RP Set group prefix will be declared down.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgGenStatTable 1.3.6.1.4.1.6527.3.1.2.50.1.15
vRtrPimNgGenStatTable lists PIM statistics for a particular PIM instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGenStatEntry

vRtrPimNgGenStatEntry 1.3.6.1.4.1.6527.3.1.2.50.1.15.1
An entry in the vRtrPimNgGenStatTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGenStatEntry  

vRtrPimNgGenStatTxCrpaPdus 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.1
The value of vRtrPimNgGenStatTxCrpaPdus indicates the number of PIM Candidate-RP Advertisements (C-RP-Adv) transmitted by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxCrpaPduErrs 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.2
The value of vRtrPimNgGenStatTxCrpaPduErrs indicates the number of errors while transmitting PIM Candidate-RP Advertizements (C-RP-Adv).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatRxCrpaPdus 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.3
The value of vRtrPimNgGenStatRxCrpaPdus indicates the number of PIM Candidate-RP Advertizements (C-RP-Adv) received by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatRxCrpaPduDrops 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.4
The value of vRtrPimNgGenStatRxCrpaPduDrops indicates the number of PIM Candidate-RP Advertizements (C-RP-Adv) received by this instance, but were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatStarStarRPTypes 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.5
The value of vRtrPimNgGenStatStarStarRPTypes indicates the number of entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is 'starStarRP'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGenStatStarGTypes 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.6
The value of vRtrPimNgGenStatStarGTypes indicates the number of entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is 'starG'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGenStatSGTypes 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.7
The value of vRtrPimNgGenStatSGTypes indicates the number of entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is 'sg'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGenStatTxRegisters 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.8
The value of vRtrPimNgGenStatTxRegisters indicates the number of PIM Register messages transmitted by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxRegisterErrs 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.9
The value of vRtrPimNgGenStatTxRegisterErrs indicates the number the times there was an error while transmitting PIM Register messages by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxNullRegisters 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.10
The value of vRtrPimNgGenStatTxNullRegisters indicates the number of PIM Null Register messages transmitted by this instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxRegTTLDrops 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.11
The value of vRtrPimNgGenStatTxRegTTLDrops indicates the number of multicast data packets which could not be encapsulated in Register messages because the Time To Live (TTL) was zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatForwardCrpaPdus 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.12
The value of vRtrPimNgGenStatForwardCrpaPdus indicates the number of Candidate-RP Advertizements(C-RP-Adv) that were forwarded by the router. C-RP-Adv's are forwarded when the received advertizement has a router alert set and the destination address is not the router's local address.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatFwdCrpaDrops 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.13
The value of vRtrPimNgGenStatFwdCrpaDrops indicates the number of times the Candidate-RP Advertizements(C-RP-Adv) could not be forwarded by the router.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxMdtJoinTlvs 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.14
The value of vRtrPimNgGenStatTxMdtJoinTlvs indicates the number of times MDT Join TLV were transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatRxMdtJoinTlvs 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.15
The value of vRtrPimNgGenStatRxMdtJoinTlvs indicates the number of times MDT Join TLV were received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxMdtJnTlvErrs 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.16
The value of vRtrPimNgGenStatTxMdtJnTlvErrs indicates indicates the number of times MDT Join TLV could not be transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatRxMdtJnTlvErrs 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.17
The value of vRtrPimNgGenStatRxMdtJnTlvErrs indicates indicates number of times MDT Join TLVs were dropped due to errors in the received TLV.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxActiveMdts 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.18
The value of vRtrPimNgGenStatTxActiveMdts indicates the number of active MDTs on which the PE is forwarding packets. This object is applicable to VPRNs only.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGenStatRxActiveMdts 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.19
The value of vRtrPimNgGenStatRxActiveMdts indicates number of active Mdts on which the PE is receiving packets. This object is applicable to VPRNs only.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgGenStatTxSpmsiLimitHits 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.20
The value of vRtrPimNgGenStatTxSpmsiLimitHits indicates the number of times the switch from ipmsi to spmsi is failed because of reaching the maximum spmsi limit configured in TIMETRA-VRTR-MIB::vRtrMvpnSpmsiMaxLimit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatRxCtrlPduIfDrops 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.21
The value of vRtrPimNgGenStatRxCtrlPduIfDrops indicates the number of control PDU drops on an interface which is operationally down or on an interface on which PIM is not enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatP2mpPmsiReqFails 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.22
The value of vRtrPimNgGenStatP2mpPmsiReqFails indicates the number of times a P2MP PMSI tunnel request has failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatP2mpPmsiCrtFails 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.23
The value of vRtrPimNgGenStatP2mpPmsiCrtFails indicates the number of times a P2MP PMSI tunnel creation has failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatTxMdts 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.24
The value of vRtrPimNgGenStatTxMdts indicates the number of MDTs created by the PE for forwarding packets. This object is applicable to VPRNs only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGenStatRxMdts 1.3.6.1.4.1.6527.3.1.2.50.1.15.1.25
The value of vRtrPimNgGenStatRxMdts indicates the number of MDTs created by the PE for receiving packets. This object is applicable to VPRNs only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatTable 1.3.6.1.4.1.6527.3.1.2.50.1.16
vRtrPimNgGrpSrcStatTable contains statistics for the entries in the vRtrPimNgGrpSrcTable. These statistics are collected by the forwarding engine.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGrpSrcStatEntry

vRtrPimNgGrpSrcStatEntry 1.3.6.1.4.1.6527.3.1.2.50.1.16.1
An entry in the vRtrPimNgGrpSrcStatTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGrpSrcStatEntry  

vRtrPimNgGrpSrcStatFrwdedPkts 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.1
The value of vRtrPimNgGrpSrcStatFrwdedPkts indicates the number of multicast packets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list. This packet count is calculated before ingress QoS policing or shaping is applied.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatOFFrwdedPkts 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.2
The value of vRtrPimNgGrpSrcStatOFFrwdedPkts indicates the number of times the associated vRtrPimNgGrpSrcStatFrwdedPkts counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatHCFrwdedPkts 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.3
The value of vRtrPimNgGrpSrcStatHCFrwdedPkts indicates the number of multicast packets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrPimNgGrpSrcStatDscrdPkts 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.4
The value of vRtrPimNgGrpSrcStatDscrdPkts indicates the number of multicast packets that matched this source group entry but were discarded. For (S,G) entries, if the traffic is getting forwarded on the SPT, the packets arriving from the RPT will be discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatOFDscrdPkts 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.5
The value of vRtrPimNgGrpSrcStatOFDscrdPkts indicates the number of times the associated vRtrPimNgGrpSrcStatDscrdPkts counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatHCDscrdPkts 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.6
The value of vRtrPimNgGrpSrcStatHCDscrdPkts indicates the number of multicast packets that matched this source group entry but were discarded. For (S,G) entries, if the traffic is getting forwarded on the SPT, the packets arriving from the RPT will be discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrPimNgGrpSrcStatRPFMsmtch 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.7
The value of vRtrPimNgGrpSrcStatRPFMsmtch indicates the number of multicast packets that matched this source group entry but they did not arrive on the the interface indicated by vRtrPimNgGrpSrcRpfIfIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatOFRPFMsmtch 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.8
The value of vRtrPimNgGrpSrcStatOFRPFMsmtch indicates the number of times the associated vRtrPimNgGrpSrcStatRPFMsmtch counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatHCRPFMsmtch 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.9
The value of vRtrPimNgGrpSrcStatHCRPFMsmtch indicates the number of multicast packets that matched this source group entry but they did not arrive on the the interface indicated by vRtrPimNgGrpSrcRpfIfIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrPimNgGrpSrcStatFrdedOct 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.10
The value of vRtrPimNgGrpSrcStatFrdedOct indicates the number of multicast octets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatOFFrdedOct 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.11
The value of vRtrPimNgGrpSrcStatOFFrdedOct indicates the number of times the associated vRtrPimNgGrpSrcStatFrdedOct counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgGrpSrcStatHCFrdedOct 1.3.6.1.4.1.6527.3.1.2.50.1.16.1.12
The value of vRtrPimNgGrpSrcStatHCFrdedOct indicates the number of multicast octets that were forwarded to the interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the outgoing interface list.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrPimNgGenPolicyTable 1.3.6.1.4.1.6527.3.1.2.50.1.17
vRtrPimNgGenPolicyTable lists PIM policies for a particular PIM instance. PIM Join-Prune and Register policies provide a way to to control the creation of (*,G) or (S,G) state that gets created on a router. The bootstrap policies provide a way to control the flow of bootstrap messages to and from the router. PIM Policies are created using the TIMETRA-ROUTE-POLICY-MIB::tRPAdminPSFromCriteriaTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGenPolicyEntry

vRtrPimNgGenPolicyEntry 1.3.6.1.4.1.6527.3.1.2.50.1.17.1
An entry in the vRtrPimNgGenPolicyTable. Each entry corresponds to an entry in the vRtrPimNgGeneralTable. Entries in this table are created implicitly whenever an entry is created in the vRtrPimNgGeneralTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGenPolicyEntry  

vRtrPimNgImportJoinPrunePolicy1 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.1
vRtrPimNgImportJoinPrunePolicy1 is the the first policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportJoinPrunePolicy2 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.2
vRtrPimNgImportJoinPrunePolicy2 is the second policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportJoinPrunePolicy3 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.3
vRtrPimNgImportJoinPrunePolicy3 is the third policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportJoinPrunePolicy4 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.4
vRtrPimNgImportJoinPrunePolicy4 is the fourth policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportJoinPrunePolicy5 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.5
vRtrPimNgImportJoinPrunePolicy5 is the fifth policy to be used for determining how the PIM Join-Prune messages are filtered. Join-Prune messages can be filtered based on different criteria such as multicast group or source address contained in the message, interface on which the messages are received or the address of the neighbor who is sending the message. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportRegisterPolicy1 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.6
vRtrPimNgImportRegisterPolicy1 is the the first policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportRegisterPolicy2 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.7
vRtrPimNgImportRegisterPolicy2 is the the second policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportRegisterPolicy3 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.8
vRtrPimNgImportRegisterPolicy3 is the the third policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportRegisterPolicy4 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.9
vRtrPimNgImportRegisterPolicy4 is the the fourth policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportRegisterPolicy5 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.10
The value of vRtrPimNgImportRegisterPolicy5 is the the fifth policy to be used for determining how the PIM Register messages are filtered. Register policies are only relevant on the Rendezvous Point(RP). Register messages can be filtered based on different criteria such as multicast group or source address contained in the inner multicast data packet or the interface on which the Register Messages are received. The import policy name list, vRtrPimNgImportRegisterPolicy1 through vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportBootstrapPolicy1 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.11
vRtrPimNgImportBootstrapPolicy1 is the the first policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportBootstrapPolicy2 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.12
vRtrPimNgImportBootstrapPolicy2 is the the second policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportBootstrapPolicy3 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.13
vRtrPimNgImportBootstrapPolicy3 is the the third policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportBootstrapPolicy4 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.14
vRtrPimNgImportBootstrapPolicy4 is the the fourth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgImportBootstrapPolicy5 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.15
The value of vRtrPimNgImportBootstrapPolicy5 is the the fifth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap import policies are used to control the flow of Bootstrap Messages to the router. The import policy name list, vRtrPimNgImportBootstrapPolicy1 through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgExportBootstrapPolicy1 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.16
vRtrPimNgExportBootstrapPolicy1 is the the first policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgExportBootstrapPolicy2 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.17
vRtrPimNgExportBootstrapPolicy2 is the the second policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgExportBootstrapPolicy3 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.18
vRtrPimNgExportBootstrapPolicy3 is the the third policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgExportBootstrapPolicy4 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.19
vRtrPimNgExportBootstrapPolicy4 is the the fourth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgExportBootstrapPolicy5 1.3.6.1.4.1.6527.3.1.2.50.1.17.1.20
The value of vRtrPimNgExportBootstrapPolicy5 is the the fifth policy to be used for determining how the PIM Bootstrap messages are filtered. Bootstrap export policies are used to control the flow of Bootstrap Messages from the router. The export policy name list, vRtrPimNgExportBootstrapPolicy1 through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimNgSSMGroupTableLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.18
The value of vRtrPimNgSSMGroupTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgSSMGroupTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgSSMGroupTable 1.3.6.1.4.1.6527.3.1.2.50.1.19
vRtrPimNgSSMGroupTable contains a range of group addresses which are reserved for Source Specific Multicast(SSM). The SSM standard designates IPv4 addresses in the 232/8 range and IPv6 addresses in FF3X:0000:/32 range for SSM destination addresses. This table is used to configure group addresses in addition to those defined in the SSM standard.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgSSMGroupEntry

vRtrPimNgSSMGroupEntry 1.3.6.1.4.1.6527.3.1.2.50.1.19.1
vRtrPimNgSSMGroupEntry defines a group range to be used for SSM.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgSSMGroupEntry  

vRtrPimNgSSMGroupAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.19.1.1
The value of vRtrPimNgSSMGroupAddressType indicates the type of address specified by vRtrPimNgSSMGroupAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgSSMGroupAddress 1.3.6.1.4.1.6527.3.1.2.50.1.19.1.2
The value of vRtrPimNgSSMGroupAddress combined with the value of vRtrPimNgSSMGroupMask indicates the range of multicast group addresses to be used for Source Specific Multicast(SSM).
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgSSMGroupMask 1.3.6.1.4.1.6527.3.1.2.50.1.19.1.3
The value of vRtrPimNgSSMGroupMask indicates the mask which is combined with vRtrPimNgSSMGroupAddress to get the range of multicast group addresses to be used for Source Specific Multicast(SSM).
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgSSMGroupRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.19.1.4
The value of vRtrPimNgSSMGroupRowStatus is used to create or delete an entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgSSMGroupRowLastChanged 1.3.6.1.4.1.6527.3.1.2.50.1.19.1.5
The value of vRtrPimNgSSMGroupRowLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfTableLastChanged 1.3.6.1.4.1.6527.3.1.2.50.2.1
The value of vRtrPimNgIfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfTable 1.3.6.1.4.1.6527.3.1.2.50.2.2
The table listing the interfaces on which PIM protocol operation is enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgIfEntry

vRtrPimNgIfEntry 1.3.6.1.4.1.6527.3.1.2.50.2.2.1
Each row entry in the vRtrPimNgIfTable represents an interface on this router that participates in the PIM protocol. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgIfRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgIfEntry  

vRtrPimNgIfRowStatus 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.1
The value of vRtrPimNgIfRowStatus is used to create or delete an entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgIfLastChangeTime 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.2
The value of vRtrPimNgIfLastChangeTime indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfAdminState 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.3
The value of vRtrPimNgIfAdminState specifies the desired administrative state for PIM protocol on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgIfOperState 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.4
The value of vRtrPimNgIfOperState indicates the current operational state of PIM protocol on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrPimNgIfHelloInterval 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.5
The value of vRtrPimNgIfHelloInterval specifies the frequency at which PIM Hello messages are transmitted on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

vRtrPimNgIfTrackingSupport 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.6
If the value of vRtrPimNgIfTrackingSupport is set to 'true', the T bit in the LAN Prune Delay option of the Hello Message is set. This indicates the router's capability to disable Join message suppression.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfMulticastSenders 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.7
The value of vRtrPimNgIfMulticastSenders specifies the way subnet matching is done for the data packets coming on this interface from the multicast senders. For all interfaces, the default value is 'auto'. It indicates that the subnet match will happen for packets coming in on this interface. If the subnet does not match, the packet will be dropped. If the interface is unnumbered or the host is on a different subnet than that of the interface, vRtrPimNgIfMulticastSenders should be set to 'always'. It means that packets will not go through the regular subnet check and not be dropped on a subnet match. If PIM Hello messages are received on an interface with vRtrPimNgIfMulticastSenders set to 'always', they are dropped and a vRtrPimNgHelloDropped notification is generated. For broadcast interfaces, if it is required that there be no multicast senders, vRtrPimNgIfMulticastSenders should be set to 'never'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER auto(0), always(1), never(2)  

vRtrPimNgIfAutoCreated 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.8
The value of vRtrPimNgIfAutoCreated indicates if this interface was auto created using vRtrPimNgGenCreateInterfaces object. If the value of this object is 'true', this interface was auto created. If the value of this object is 'false', this interface was either not created automatically or the default values of the auto created interface were changed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfBSMCheckRouterAlert 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.9
The value of vRtrPimNgIfBSMCheckRouterAlert specifies whether to enable or disable checking of router alert option in the bootstrap messages received on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfHelloMultiplier 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.10
The value of vRtrPimNgIfHelloMultiplier specifies the multiplier for determining the holdtime for a PIM neighbor on this interface. The hello-multiplier in conjunction with the hello-interval will determine the holdtime for a PIM neighbor. The formula used to calculate the hello-holdtime based on the hello-multiplier is - (hello-interval * hello-multiplier) / 10 The hello-multiplier is specified in multiples of 0.1. This allows the PIMv2 default timeout of 3.5 seconds to be supported.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 20..100  

vRtrPimNgIfImprovedAssert 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.11
The value of vRtrPimNgIfImprovedAssert specifies whether to enable or disable improved assert processing on this interface. The PIM Assert process establishes a forwarder for a LAN and requires interaction between the control and forwarding planes. The Assert process is started when data is received on an outgoing interface. This could impact performance if data is continuously received on an outgoing interface. If this flag is set to 'true', the PIM assert process is done entirely on the control-plane with no interaction between the control and forwarding plane.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfStickyDR 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.12
The value of vRtrPimNgIfStickyDR specifies whether to enable or disable sticky-dr operation on this interface. If sticky-dr is turned on, the priority in PIM hellos sent on this interface when elected as DR will be modified to the value configured in vRtrPimNgIfStickyDRPriority. This is done to avoid the delays in forwarding caused by DR recovery, when switching back to the old DR on a LAN when it comes back up. By enabling sticky-dr on this interface, it will continue to act as the DR for the LAN even after the old DR comes back up.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfStickyDRPriority 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.13
The value of vRtrPimNgIfStickyDRPriority specifies the DR priority to be sent in PIM Hello messages following the election of that interface as the DR, when sticky-dr operation is enabled. If sticky-dr is turned off, normal PIM behavior is followed and vRtrPimNgIfStickyDRPriority is not applicable.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vRtrPimNgIfMaxGroups 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.14
The value of vRtrPimNgIfMaxGroups specifies the maximum number of groups for which PIM can have downstream state based on received PIM Joins on this interface. This does not include IGMP local receivers on the interface. When this configuration is changed dynamically to a value lower than the currently accepted number of groups, the groups that are already accepted are not deleted. Only new groups will not be allowed. When this object has a value of 0, there is no limit to the number of groups.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..1024  

vRtrPimNgIfEnableBfd 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.15
The value of vRtrPimNgIfEnableBfd specifies whether Bi-directional Forwarding Detection is enabled for Ipv4 on this PIM interface. When the value is 'true', this PIM interface can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD for Ipv4.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfThreeWayHello 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.16
vRtrPimNgIfThreeWayHello specifies whether to enable or disable the three way hello. For all interfaces, the default value is 'disabled'. It specifies that the standard two way hello is supported. When the value is set to 'enabled' it specifies that the three way hello is supported. However this will not be compatible with releases 3.0R10, 3.0R11, 4.0R2 and 4.0R3.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vRtrPimNgIfMcacPolicyName 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.17
The value of vRtrPimNgIfMcacPolicyName specifies the name of the multicast CAC policy. The multicast cac policy applies the interface cac algorithm if the channel(group) on this interface is part of the policy as specified in vRtrPimNgIfMcacPolicyName.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrPimNgIfMcacUnconstrainedBW 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.18
The value of vRtrPimNgIfMcacUnconstrainedBW specifies the bandwidth assigned for interface's multicast cac policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of vRtrPimNgIfMcacUnconstrainedBW is set to '0' and if a multicast cac policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..2147483647  

vRtrPimNgIfMcacConstAdminState 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.19
The value of vRtrPimNgIfMcacConstAdminState specifies the administrative state of the multicast CAC policy's constraints.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgIfMcacPreRsvdMandBW 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.20
The value of vRtrPimNgIfMcacPreRsvdMandBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of vRtrPimNgIfMcacUnconstrainedBW is '0', no mandatory channels are allowed. If the value of vRtrPimNgIfMcacUnconstrainedBW is '-1', then all mandatory and optional channels are allowed. If the value of vRtrPimNgIfMcacPreRsvdMandBW is equal to the value of vRtrPimNgIfMcacUnconstrainedBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast cac policy on that interface and no optional groups (channels) are allowed. The value of vRtrPimNgIfMcacPreRsvdMandBW should always be less than or equal to that of vRtrPimNgIfMcacUnconstrainedBW. An attempt to set the value of vRtrPimNgIfMcacPreRsvdMandBW greater than that of vRtrPimNgIfMcacUnconstrainedBW will result in inconsistent value error.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..2147483647  

vRtrPimNgIfMcacinUseMandBw 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.21
The value of vRtrPimNgIfMcacinUseMandBw indicates the in-use bandwidth in kilo-bits per second(kbps) for the mandatory channels for this protocol interface instance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfMcacinUseOpnlBw 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.22
The value of vRtrPimNgIfMcacinUseOpnlBw indicates the in-use bandwidth in kilo-bits per second(kbps) for the optional channels for this protocol interface instance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfMcacAvailMandBw 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.23
The value of vRtrPimNgIfMcacAvailMandBw indicates the pre-reserved bandwidth in kilo-bits per second(kbps) for the mandatory channels for this interface instance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfMcacAvailOpnlBw 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.24
The value of vRtrPimNgIfMcacAvailOpnlBw indicates the available bandwidth in kilo-bits per second(kbps) for this interface instance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfMcacValuesInTransit 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.25
The value of vRtrPimNgIfMcacValuesInTransit indicates that the operational (available and in-use mandatory or optional) value for the following objects are in transition due to configuration change: vRtrPimNgIfMcacAvailMandBw vRtrPimNgIfMcacAvailOpnlBw vRtrPimNgIfMcacinUseMandBw vRtrPimNgIfMcacinUseOpnlBw When Multicast CAC Policy is applied on the interface for the join of the next channel, the operational values will be recalculated and applied to the above objects and the value for vRtrPimNgIfMcacValuesInTransit will be set to 'false'. If the value of vRtrPimNgIfMcacValuesInTransit is 'true' then the values are in transition.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfDRPriority 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.26
The value of vRtrPimNgIfDRPriority specifies the value sent in PIM Hello messages and used by routers to elect the Designated Router(DR). The DR election priority is a 32-bit unsigned number and the numerically larger priority is always preferred.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vRtrPimNgIfAssertPeriod 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.27
The value of vRtrPimNgIfAssertPeriod specifies the period in seconds for periodic refreshes of PIM Assert messages on an interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..300  

vRtrPimNgIfInstantPruneEcho 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.28
The value of vRtrPimNgIfInstantPruneEcho specifies whether PIM will send an instant Prune Echo when the upstream router enters Prune-Pending state on this interface. A Prune Echo is simply a Prune message sent by the upstream router with its own address in the Upstream Neighbor Address field. Due to this, all downstream routers will see the Prune message and they can send a join override if interested in the group. This is not only useful on NMBA networks, but also can be used on a LAN enviornment to improve reliability.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrPimNgIfIpv6EnableBfd 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.29
The value of vRtrPimNgIfIpv6EnableBfd specifies whether Bi-directional Forwarding Detection is enabled for Ipv6 on this PIM interface. When the value is 'true', this PIM interface can establish BFD sessions and use BFD as a signaling mechanism. When it is 'false', it cannot use BFD for Ipv6.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfP2mpLdpTreeJoin 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.30
The value of vRtrPimNgIfP2mpLdpTreeJoin specifies whether to join a P2MP LDP tree towards a multicast source. When the value is 'true', a multicast join received on an interface is processed to join a PIM multicast tree and also copied over to LDP to join the in-band signaled P2MP tree for the same multicast flow. LDP P2MP tree is setup either to RP (ASM group) or source (SSM group). The route to the RP or the source of the multicast node is looked up from the RTM. The next-hop address for the route to RP or source is set as the root of LDP P2MP tree. When it is 'false', the P2MP LDP tree is disjoined from the multicast source.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfExtranetType 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.31
The value of vRtrPimNgIfExtranetType indicates whether the extranet interface is of type transmitter or reciever.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rx(0), tx(1), none(3)  

vRtrPimNgIfExtranetMvpnId 1.3.6.1.4.1.6527.3.1.2.50.2.2.1.32
The value of vRtrPimNgIfExtranetMvpnId indicates the id associated with the extranet interface. If the interface is not an extranet interface then the value of this object will be '0'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10240  

vRtrPimNgAFIfTable 1.3.6.1.4.1.6527.3.1.2.50.2.3
The table listing the interfaces on which PIM protocol operation is enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgAFIfEntry

vRtrPimNgAFIfEntry 1.3.6.1.4.1.6527.3.1.2.50.2.3.1
Each row entry in the vRtrPimNgAFIfTable represents an interface on this router that participates in the PIM protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgAFIfEntry  

vRtrPimNgAFIfAFType 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.1
The value of vRtrPimNgAFIfAFType indicates the address family type supported by the PIM on this interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMulticastAddrFamily  

vRtrPimNgAFIfAdminState 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.2
The value of vRtrPimNgAFIfAdminState specifies the desired administrative state associated with this address family for PIM protocol on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrPimNgAFIfOperState 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.3
The value of vRtrPimNgAFIfOperState indicates the current operational state associated with this address family for PIM protocol on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrPimNgAFIfMdtDefGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.4
The value of vRtrPimNgAFIfMdtDefGrpAddrType indicates the type of address represented by vRtrPimNgAFIfMdtDefGrpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAFIfMdtDefGrpAddress 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.5
The value of vRtrPimNgAFIfMdtDefGrpAddress indicates the default group address used for Multicast Distribution Tree (MDT). It is applicable only when this entry corresponds to a Multicast Tunnel(MT) interface for a particular VPRN.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgAFIfNextHelloTime 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.6
The value of vRtrPimNgAFIfNextHelloTime indicates the time in which the next PIM Hello message will be transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrPimNgAFIfOperDRPriority 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.7
The value of vRtrPimNgAFIfOperDRPriority indicates the priority of the current DR on a LAN. This value is different from the configured PIM DR priority and is the result of the PIM DR election process. The value of vRtrPimNgAFIfOperDRPriority will be 0 if the interface is operationally down and DR election has not taken place.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgAFIfCurrentGroups 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.8
The value of vRtrPimNgAFIfCurrentGroups indicates the number of groups that currently have this interface as an outgoing interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgAFIfMaxGroupsTillNow 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.9
The value of vRtrPimNgAFIfMaxGroupsTillNow indicates the highest value that vRtrPimNgAFIfCurrentGroups had till now.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgAFIfDRType 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.10
The value of vRtrPimNgAFIfDRType indicates the type of the address of the designated Router on this PIM interface.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAFIfDR 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.11
The value of vRtrPimNgAFIfDR indicates the Designated Router on this PIM interface.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgAFIfTrackSprtOperState 1.3.6.1.4.1.6527.3.1.2.50.2.3.1.12
The value of vRtrPimNgAFIfTrackSprtOperState indicates the operational status of PIM tracking support. The value of vRtrPimNgAFIfTrackSprtOperState is set to 'true' when all PIM routers on a LAN support join or prune tracking.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfNeighborTable 1.3.6.1.4.1.6527.3.1.2.50.2.4
The table listing the router's PIM neighbors on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgIfNeighborEntry

vRtrPimNgIfNeighborEntry 1.3.6.1.4.1.6527.3.1.2.50.2.4.1
An entry in the vRtrPimNgIfNeighborTable. Entries in this table cannot be created or deleted using SNMP.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgIfNeighborEntry  

vRtrPimNgIfNeighborAddressType 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.1
The value of vRtrPimNgIfNeighborAddressType indicates the type of IP address of the PIM neighbor.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgIfNeighborAddress 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.2
The value of vRtrPimNgIfNeighborAddress indicates the IP address of the PIM neighbor for which this entry contains information.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgIfNeighborUpTime 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.3
The value of vRtrPimNgIfNeighborUpTime indicates the time since this PIM neighbor (last) became a neighbor of the local router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfNeighborExpiryTime 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.4
The value of vRtrPimNgIfNeighborExpiryTime indicates the minimum time remaining before this PIM neighbor will be aged out. If the value of this object is zero, it means that this neighbor will never be aged out. This happens when the PIM neighbor sends a Hello message with Holdtime set to `0xffff'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfNeighborGenId 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.5
The value of vRtrPimNgIfNeighborGenId indicates a randomly generated 32-bit value that is regenerated each time PIM forwarding is started or restarted on the interface, including when the router itself restarts. When a Hello message with a new vRtrPimNgIfNeighborGenId is received from a neighbor, any old Hello information about that neighbor is discarded and superseded by the information from the new Hello message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfNeighborDrPriority 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.6
The value of vRtrPimNgIfNeighborDrPriority indicates neighbor's DR priority which is received in the hello message. If the Hello Message did not contain the DR priority field, the value of this object will be set to '1' and vRtrPimNgIfNeighborDrPriorPrsnt will be set to 'false'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfNeighborDrPriorPrsnt 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.7
The value of vRtrPimNgIfNeighborDrPriorPrsnt indicates whether the DR priority field was present in the Hello message received from the PIM neighbor. If present, the value is set to 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfNeighborLanDelay 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.8
The value of vRtrPimNgIfNeighborLanDelay indicates the lan delay field present in the Hello message received from the neighbor. If the neighbor did not send this field, a default value of 500 ms is used and the value of vRtrPimNgIfNeighborLanDlayPrsnt is set to 'false'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfNeighborLanDlayPrsnt 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.9
The value of vRtrPimNgIfNeighborLanDlayPrsnt indicates whether the Hello message received from the neighbor contained the Lan Delay field. If present, the value is set to 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfNeighborTrckngSpprt 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.10
The value of vRtrPimNgIfNeighborTrckngSpprt indicates whether the T bit in the LAN Prune Delay option was present in the Hello message. This indicates the neighbor's capability to disable Join message suppression.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfNeighborHoldTime 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.11
The value of vRtrPimNgIfNeighborHoldTime contains the value of the hold time present in the Hello message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfNeighborOvrdeIntrvl 1.3.6.1.4.1.6527.3.1.2.50.2.4.1.12
The value of vRtrPimNgIfNeighborOvrdeIntrvl contains the value of the override interval present in the Hello message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcTable 1.3.6.1.4.1.6527.3.1.2.50.2.5
The table listing the (*,*,RP), (*,G) and (S,G) and (S,G,rpt) entries for which this particular interface has state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgIfGrpSrcEntry

vRtrPimNgIfGrpSrcEntry 1.3.6.1.4.1.6527.3.1.2.50.2.5.1
An entry in the vRtrPimNgIfGrpSrcTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgIfGrpSrcEntry  

vRtrPimNgIfGrpSrcType 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.1
The value of vRtrPimNgIfGrpSrcType indicates the type of this entry for this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER starStarRP(0), starG(1), sg(2)  

vRtrPimNgIfGrpSrcGroupAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.2
The value of vRtrPimNgIfGrpSrcGroupAddrType indicates the type of address of the multicast group address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgIfGrpSrcGroupAddress 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.3
The value of vRtrPimNgIfGrpSrcGroupAddress indicates the multicast group address of the entry. It will be zero if the vRtrPimNgIfGrpSrcType is 'starStarRP'.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgIfGrpSrcSourceAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.4
The value of vRtrPimNgIfGrpSrcSourceAddrType indicates the type of source address of the multicast sender.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgIfGrpSrcSourceAddress 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.5
The value of vRtrPimNgIfGrpSrcSourceAddress indicates the source address of the multicast sender. It will be zero if the vRtrPimNgIfGrpSrcType is 'starG' and it will be the address of the Rendezvous Point(RP) if the vRtrPimNgIfGrpSrcType is 'starStarRP'.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgIfGrpSrcRPAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.6
The value of vRtrPimNgIfGrpSrcRPAddrType indicates the type of address of the Rendezvous Point(RP).
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgIfGrpSrcRPAddress 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.7
The value of vRtrPimNgIfGrpSrcRPAddress indicates the address of the Rendezvous Point(RP).
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgIfGrpSrcJPState 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.8
The value of vRtrPimNgIfGrpSrcJPState indicates the Join Prune state for this entry on the interface. PIM Join or Prune messages are sent by the downstream routers towards the RPF' neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noInfo(0), join(1), prunePend(2), pruned(3)  

vRtrPimNgIfGrpSrcPrunePendTimer 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.9
The value of vRtrPimNgIfGrpSrcPrunePendTimer indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPState to 'noInfo'. The timer is set when the PIM Prune message is received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcJoinPruneTimer 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.10
The value of vRtrPimNgIfGrpSrcJoinPruneTimer indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPState to 'noInfo'. The timer is started or restarted when a valid Join message is received. If the value of this object is zero and vRtrPimNgIfGrpSrcJPState is 'join' state, it means that the downstream router sent a holdtime of '0xffff'. In this case, vRtrPimNgIfGrpSrcJPState will not transition until an appropriate cancelling of Join or Prune message is received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcJPRptState 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.11
The value of vRtrPimNgIfGrpSrcJPRptState indicates the Join Prune Rpt state for this entry on the interface. PIM Join or Prune messages are sent by the downstream routers towards the RPF' neighbor. (S,G,rpt) state is a result of receiving (S,G, rpt) JP message from the downstream router on the RP tree.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noInfo(0), join(1), prunePend(2), pruned(3)  

vRtrPimNgIfGrpSrcRptPrnePendTmr 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.12
The value of vRtrPimNgIfGrpSrcRptPrnePendTmr indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPRptState to 'noInfo'. The timer is set when the (S,G,rpt) PIM Prune message is received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcRptJoinPrneTmr 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.13
The value of vRtrPimNgIfGrpSrcRptJoinPrneTmr indicates the time remaining before the router transitions the value of vRtrPimNgIfGrpSrcJPRptState to 'noInfo'. The timer is started or restarted when a valid Join message is received. If the value of this object is zero and vRtrPimNgIfGrpSrcJPRptState is in 'join' state, it means that the downstream router sent a holdtime of '0xffff'. In this case, vRtrPimNgIfGrpSrcJPRptState will not transition until an appropriate cancelling of Join or Prune message is received from the downstream router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcAssertState 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.14
The value of vRtrPimNgIfGrpSrcAssertState indicates the ASSERT state for this entry. Where multiple PIM routers peer over a shared LAN it is possible for more than one upstream router to have valid forwarding state for a packet, which can lead to packet duplication. PIM does not attempt to prevent this from occurring. Instead it detects when this has happened and elects a single forwarder amongst the upstream routers to prevent further duplication. This election is performed using PIM Assert messages. Assert messages are also received by downstream routers on the LAN, and these cause subsequent Join or Prune messages to be sent to the upstream router that won the Assert.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noInfo(0), lostAssert(1), wonAssert(2)  

vRtrPimNgIfGrpSrcAssertTimer 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.15
The value of vRtrPimNgIfGrpSrcAssertTimer indicates the time remaining before the router transitions the vRtrPimNgIfGrpSrcAssertState to 'noInfo' if the value of vRtrPimNgIfGrpSrcAssertState is 'lostAssert'. If the value of vRtrPimNgIfGrpSrcAssertState is 'wonAssert', the value of vRtrPimNgIfGrpSrcAssertTimer indicates the time remaining before it resends the ASSERT message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcAssertMetric 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.16
The value of vRtrPimNgIfGrpSrcAssertMetric indicates the metric associated by the MRIB for the route towards the source or the RP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcAsrtMetricPref 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.17
The value of vRtrPimNgIfGrpSrcAsrtMetricPref indicates the preference associated by the MRIB for the route towards the source or the RP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcAssertRPTBit 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.18
The value of vRtrPimNgIfGrpSrcAssertRPTBit is 'true' if the RPT bit is set and 'false' when the RPT bit is not set.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfGrpSrcAsrtWinnerMtrc 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.19
The value of vRtrPimNgIfGrpSrcAsrtWinnerMtrc indicates the ASSERT winner's metric associated by it's MRIB for the route towards the source or the RP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.20
The value of vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf indicates the ASSERT winner's preference associated by it's MRIB for the route towards the source or the RP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcAsrtWnrRPTBit 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.21
The value of vRtrPimNgIfGrpSrcAsrtWnrRPTBit is 'true' if the RPT bit is set and 'false' when the RPT bit is not set.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPimNgIfGrpSrcAsrtWnrAddrTyp 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.22
The value of vRtrPimNgIfGrpSrcAsrtWnrAddrTyp indicates type of address of the ASSERT winner's interface IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgIfGrpSrcAsrtWinnerAddr 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.23
The value of vRtrPimNgIfGrpSrcAsrtWinnerAddr indicates the ASSERT winner's interface IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgIfGrpSrcUpTime 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.24
The value of vRtrPimNgIfGrpSrcUpTime indicates the time since this source group entry got created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfGrpSrcDataMtIfIndex 1.3.6.1.4.1.6527.3.1.2.50.2.5.1.25
The value of vRtrPimNgIfGrpSrcDataMtIfIndex indicates the interface index of the Multicast Tunnel(MT) interface. If the value of vRtrPimNgIfGrpSrcDataMtIfIndex is zero, it indicates that there is no data MT associated with this group-source interface to forward multicast traffic into the service provider network. If the value of vRtrPimNgIfGrpSrcDataMtIfIndex is non-zero, it indicates the data MT tunnel that is used to forward multicast traffic into the service provider network.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrPimNgIfStatsTable 1.3.6.1.4.1.6527.3.1.2.50.2.6
The table listing the PIM statistics for a particular interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgIfStatsEntry

vRtrPimNgIfStatsEntry 1.3.6.1.4.1.6527.3.1.2.50.2.6.1
An entry in the vRtrPimNgIfStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgIfStatsEntry  

vRtrPimNgIfTxPkts 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.1
The value of vRtrPimNgIfTxPkts indicates the number of multicast data packets transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxHellos 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.2
The value of vRtrPimNgIfTxHellos indicates the number of PIM Hello messages transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxAsserts 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.3
The value of vRtrPimNgIfTxAsserts indicates the number of PIM Assert messages transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxRegisterStops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.4
The value of vRtrPimNgIfTxRegisterStops indicates the number of PIM Register Stop messages transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxRegisterStopErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.5
The value of vRtrPimNgIfTxRegisterStopErrs indicates the number of PIM errors while trasmitting PIM Register Stop messages on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxBsmPdus 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.6
The value of vRtrPimNgIfTxBsmPdus indicates the number of PIM Bootstrap Messages (BSM) transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxBsmErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.7
The value of vRtrPimNgIfTxBsmErrs indicates the number of errors while transmitting PIM Bootstrap Messages (BSM) on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxPkts 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.8
The value of vRtrPimNgIfRxPkts indicates the number of multicast data packets received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxHellos 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.9
The value of vRtrPimNgIfRxHellos indicates the number of PIM hello messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxHellosDropped 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.10
The value of vRtrPimNgIfRxHellosDropped indicates the number of PIM Hello messages which were received on this interface but were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxNbrUnknown 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.11
The value of vRtrPimNgIfRxNbrUnknown indicates the number of PIM messages (other than Hello messages) which were received on this interface and were rejected because the adjacency with the neighbor router was not already established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBadChecksumDiscard 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.12
The value of vRtrPimNgIfRxBadChecksumDiscard indicates the number of PIM messages received on this interface which were discarded because of bad checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBadVersionDiscard 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.13
The value of vRtrPimNgIfRxBadVersionDiscard indicates the number of PIM messages with bad versions received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBadEncodings 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.14
The value of vRtrPimNgIfRxBadEncodings indicates the number of PIM messages with bad encodings received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxAsserts 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.15
The value of vRtrPimNgIfRxAsserts indicates the number of PIM Assert messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxAssertErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.16
The value of vRtrPimNgIfRxAssertErrs indicates the number of errors while processing Assert messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxRegisters 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.17
The value of vRtrPimNgIfRxRegisters indicates the number of PIM Register messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxRegisterErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.18
The value of vRtrPimNgIfRxRegisterErrs indicates the number of errors while processing Register messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxNullRegisters 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.19
The value of vRtrPimNgIfRxNullRegisters indicates the number of PIM Null Register messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxRegisterStops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.20
The value of vRtrPimNgIfRxRegisterStops indicates the number of PIM Register Stop messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxRegisterStopErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.21
The value of vRtrPimNgIfRxRegisterStopErrs indicates the number of errors while processing Register Stop messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxCRPAdvNoRtrAlert 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.22
The value of vRtrPimNgIfRxCRPAdvNoRtrAlert indicates the number of Candidate-RP Advertizements(C-RP-Adv) received on this interface which had no router alert option set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBsmPdus 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.23
The value of vRtrPimNgIfRxBsmPdus indicates the number of Bootstrap Messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBsmPduDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.24
The value of vRtrPimNgIfRxBsmPduDrops indicates the number of Bootstrap Messages received on this interface but were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfStarStarRPTypes 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.25
The value of vRtrPimNgIfStarStarRPTypes indicates the number of entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'starStarRP'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgIfStarGTypes 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.26
The value of vRtrPimNgIfStarGTypes indicates the number of entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'starG'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgIfSGTypes 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.27
The value of vRtrPimNgIfSGTypes indicates the number of entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'sg'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPimNgIfJoinPolicyDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.28
The value of vRtrPimNgIfJoinPolicyDrops indicates the number of times the join policy match resulted in dropping PIM Join-Prune Message or one of the source group contained in the message. PIM Join policies are configured using join policy objects in vRtrPimNgGenPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRegisterPolicyDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.29
The value of vRtrPimNgIfRegisterPolicyDrops indicates the number of times the register policy match resulted in dropping PIM Register Message. PIM Register policies are configured using the register policy objects in vRtrPimNgGenPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfBtrImpPolicyDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.30
The value of vRtrPimNgIfBtrImpPolicyDrops indicates the number of Bootstrap Messages received on this interface but were dropped because of Bootstrap import policy. PIM Bootstrap import policies are configured using bootstrap import policy objects in vRtrPimNgGenPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfBtrExpPolicyDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.31
The value of vRtrPimNgIfBtrExpPolicyDrops indicates the number of Bootstrap Messages that were not transmitted on this interface because of Bootstrap export policy. PIM Bootstrap export policies are configured using bootstrap export policy objects in vRtrPimNgGenPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxJoinPrunes 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.32
The value of vRtrPimNgIfTxJoinPrunes indicates the number of PIM Join Prune messages transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxJoinPrunes 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.33
The value of vRtrPimNgIfRxJoinPrunes indicates the number of PIM Join Prune messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxInvalidJoinPrunes 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.34
The value of vRtrPimNgIfRxInvalidJoinPrunes indicates the number of invalid PIM Join Prune messages received on this interface. A Join Prune message is invalid when the RP address in the message is not the RP for the group specified in the message. If such a message arrives, a vRtrPimNgInvalidJoinPrune notification is sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxInvalidRegisters 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.35
The value of vRtrPimNgIfRxInvalidRegisters indicates the number of invalid PIM Register messages received on this interface. A Register message is invalid when the RP address in the message is not the RP for the group specified in the message. If such a message arrives, a vRtrPimNgInvalidRegister notification is sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxUnknownPdus 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.36
The value of vRtrPimNgIfRxUnknownPdus indicates the number of packets received with an unsupported PIM type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxJoinPruneErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.37
The value of vRtrPimNgIfRxJoinPruneErrs indicates the number of errors while processing Join-Prune messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBSMNoRouterAlertDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.38
The value of vRtrPimNgIfRxBSMNoRouterAlertDrops indicates the number of BSM messages that were dropped because router alert option was not present.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBSMWrongIfDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.39
The value of vRtrPimNgIfRxBSMWrongIfDrops indicates the number of BSM messages that were dropped either because they were not sent by the correct RPF neighbor or because they arrived on the wrong interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfMcacPolicyDrops 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.40
The value of the object vRtrPimNgIfMcacPolicyDrops indicates the number times a PIM Group is dropped because of applying a multicast CAC policy on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxIntraASAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.41
The value of the object vRtrPimNgIfTxIntraASAD indicates the number of Intra AS AD routes transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxIntraASAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.42
The value of the object vRtrPimNgIfRxIntraASAD indicates the number of Intra AS AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxIntraASADErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.43
The value of the object vRtrPimNgIfRxIntraASADErrs indicates the number of errors while processing Intra AS AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxInterASAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.44
The value of the object vRtrPimNgIfTxInterASAD indicates the number of Inter AS AD routes transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxInterASAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.45
The value of the object vRtrPimNgIfRxInterASAD indicates the number of Inter AS AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxInterASADErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.46
The value of the object vRtrPimNgIfRxInterASADErrs indicates the number of errors while processing Inter AS AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxSpmsiAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.47
The value of the object vRtrPimNgIfTxSpmsiAD indicates the number of S-PMSI AD routes transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxSpmsiAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.48
The value of the object vRtrPimNgIfRxSpmsiAD indicates the number of S-PMSI AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxSpmsiADErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.49
The value of the object vRtrPimNgIfRxSpmsiADErrs indicates the number of errors while processing S-PMSI AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxLeafAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.50
The value of the object vRtrPimNgIfTxLeafAD indicates the number of Leaf AD routes transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxLeafAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.51
The value of the object vRtrPimNgIfRxLeafAD indicates the number of Leaf AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxLeafADErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.52
The value of the object vRtrPimNgIfRxLeafADErrs indicates the number of errors while processing Leaf AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxSrcActAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.53
The value of the object vRtrPimNgIfTxSrcActAD indicates the number of Source Active AD routes transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxSrcActAD 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.54
The value of the object vRtrPimNgIfRxSrcActAD indicates the number of Source Active AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxSrcActADErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.55
The value of the object vRtrPimNgIfTxSrcActADErrs indicates the number of errors while processing Source Active AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxSharedTreeJoin 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.56
The value of the object vRtrPimNgIfTxSharedTreeJoin indicates the number of Shared Tree Joins transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxSharedTreeJoin 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.57
The value of the object vRtrPimNgIfRxSharedTreeJoin indicates the number of Shared Tree Joins received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxSharedTreeJoinErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.58
The value of the object vRtrPimNgIfRxSharedTreeJoinErrs indicates the number of errors while processing Shared Tree Joins received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxSrcTreeJoin 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.59
The value of the object vRtrPimNgIfTxSrcTreeJoin indicates the number of Source Tree Joins transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxSrcTreeJoin 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.60
The value of the object vRtrPimNgIfRxSrcTreeJoin indicates the number of Source Tree Joins received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxSrcTreeJoinErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.61
The value of the object vRtrPimNgIfRxSrcTreeJoinErrs indicates the number of errors while processing Source Tree Joins received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxBgpPkts 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.62
The value of the object vRtrPimNgIfTxBgpPkts indicates the number of BGP Packets transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxBgpPkts 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.63
The value of the object vRtrPimNgIfRxBgpPkts indicates the number of BGP Packets received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxMdtSafi 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.64
The value of the object vRtrPimNgIfTxMdtSafi indicates the number of MDT-SAFI AD routes transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxMdtSafi 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.65
The value of the object vRtrPimNgIfRxMdtSafi indicates the number of MDT-SAFI AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxMdtSafiErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.66
The value of the object vRtrPimNgIfRxMdtSafiErrs indicates the number of errors while processing MDT-SAFI AD routes received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxAutoRpGenErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.67
The value of the object vRtrPimNgIfRxAutoRpGenErrs indicates the number of errors while processing Auto-RP messages received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxAutoRpAnnounce 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.68
The value of the object vRtrPimNgIfRxAutoRpAnnounce indicates the number Auto-RP announcements received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxAutoRpAnnounce 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.69
The value of the object vRtrPimNgIfTxAutoRpAnnounce indicates the number of Auto-RP announcements transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxAutoRpAnnounceErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.70
The value of the object vRtrPimNgIfRxAutoRpAnnounceErrs indicates the number of errors while processing Auto-RP announcements received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxAutoRpAnnounceErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.71
The value of the object vRtrPimNgIfTxAutoRpAnnounceErrs indicates the number of errors while transmitting Auto-RP announcements on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxAutoRpMapping 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.72
The value of the object vRtrPimNgIfRxAutoRpMapping indicates the number of Auto-RP mappings received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxAutoRpMapping 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.73
The value of the object vRtrPimNgIfTxAutoRpMapping indicates the number of Auto-RP mappings transmitted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfRxAutoRpMappingErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.74
The value of the object vRtrPimNgIfRxAutoRpMappingErrs indicates the number of errors while processing Auto-RP mappings received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgIfTxAutoRpMappingErrs 1.3.6.1.4.1.6527.3.1.2.50.2.6.1.75
The value of the object vRtrPimNgIfTxAutoRpMappingErrs indicates the number of errors while transmitting Auto-RP mappings on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrPimNgDataMtTable 1.3.6.1.4.1.6527.3.1.2.50.2.7
The table lists the Data Multicast Tunnel(MT) interfaces. An MT can be thought of as a connector between a set of PE routers forming a Multicast Domain. From the perspective of a VPN-specific PIM instance, an MT is a single multi-access interface. An MT interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the MT interface is automatically deleted. vRtrPimNgDataMtThd is present in another table vRtrPimNgDataMtThdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgDataMtEntry

vRtrPimNgDataMtEntry 1.3.6.1.4.1.6527.3.1.2.50.2.7.1
An entry in the vRtrPimNgDataMtTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgDataMtEntry  

vRtrPimNgDataMtMdSourceAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.7.1.1
The value of vRtrPimNgDataMtMdSourceAddrType indicates the address type of vRtrPimNgDataMtMdSourceAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgDataMtMdSourceAddress 1.3.6.1.4.1.6527.3.1.2.50.2.7.1.2
The value of vRtrPimNgDataMtMdSourceAddress indicates the source address for a Multicast Tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgDataMtMdGroupAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.7.1.3
The value of vRtrPimNgDataMtMdGroupAddrType indicates the address type of vRtrPimNgDataMtMdGroupAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgDataMtMdGroupAddress 1.3.6.1.4.1.6527.3.1.2.50.2.7.1.4
The value of vRtrPimNgDataMtMdGroupAddress indicates the group address for a Multicast Tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgDataMtIfIndex 1.3.6.1.4.1.6527.3.1.2.50.2.7.1.5
The value of vRtrPimNgDataMtIfIndex indicates the interface index of the Multicast Data Tunnel(Data MT) interface. This value will be non-zero integer value specific to the router.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgDataMtUptime 1.3.6.1.4.1.6527.3.1.2.50.2.7.1.6
The value of vRtrPimNgDataMtUptime indicates the time since this data Multicast Tunnel(MT) entry got created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgDataMtNumVpnSGs 1.3.6.1.4.1.6527.3.1.2.50.2.7.1.7
The value of vRtrPimNgDataMtNumVpnSGs indicates the number of C-(S,G)'s mapped to this Multicast Tunnel(MT) interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgDataMtCGrpSrcTable 1.3.6.1.4.1.6527.3.1.2.50.2.8
The table lists the C-(S,G) mapped to the Data Multicast Tunnel(MT). An entry in vRtrPimNgDataMtCGrpSrcTable is created whenever a C-(S,G) is mapped to a MT interface. An entry will be deleted automatically when the mapping between C-(S,G) and Data MT is removed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgDataMtCGrpSrcEntry

vRtrPimNgDataMtCGrpSrcEntry 1.3.6.1.4.1.6527.3.1.2.50.2.8.1
An entry in the vRtrPimNgDataMtCGrpSrcTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgDataMtCGrpSrcEntry  

vRtrPimNgDataMtCGrpSrcGrpAdType 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.1
The value of vRtrPimNgDataMtCGrpSrcGrpAdType indicates the address type of vRtrPimNgDataMtCGrpSrcGroupAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgDataMtCGrpSrcGroupAddr 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.2
The value of vRtrPimNgDataMtCGrpSrcGroupAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgDataMtCGrpSrcSrcAdType 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.3
The value of vRtrPimNgDataMtCGrpSrcSrcAdType indicates the address type of vRtrPimNgDataMtCGrpSrcSrcAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgDataMtCGrpSrcSrcAddr 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.4
The value of vRtrPimNgDataMtCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgDataMtCGrpSrcState 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.5
The value of vRtrPimNgDataMtCGrpSrcState indicates the state of this Multicast Tunnel(MT) (S,G). If the data-mdt is bound to a (C-S,G) on the ingress PE and if the PE has sent out a MDT Join TLV, the state will be txJoinPending. The state will change to txJoined when the (C-S,G) traffic is switched over to the new data mdt. If the data-mdt is not bound to a (C-S,G) on the egress PE, the state will be rxNotJoined. The state will be rxJoined if the (C-S,G) has bound to the data-mdt.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER txJoinPending(0), txJoined(1), rxNotJoined(2), rxJoined(3)  

vRtrPimNgDataMtCGrpSrcJoinTimer 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.6
The value of vRtrPimNgDataMtCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the Data Multicast Distribution Tree (MDT) group. After providing sufficient time for all PE's to join the data MDT the transmitting PE switches the given multicast stream to the Data MDT. The PE router connected to the source then starts encapsulating traffic using the Data MDT group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgDataMtCGrpSrcHolddownTimer 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.7
The value of vRtrPimNgDataMtCGrpSrcHolddownTimer indicates the time interval before which the PE router will switch back to the Default MDT tree after it started encapsulating packets using the Data MDT group. This is used to avoid oscillation when traffic is bursty.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgDataMtCGrpSrcExpiryTimer 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.8
The value of vRtrPimNgDataMtCGrpSrcExpiryTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers time out Multicast Distribution Tree Join Tag Length Value (TLV) received and leave the data MDT group. This value must be consistent among PE routers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgDataMtCGrpSrcUptime 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.9
The value of vRtrPimNgDataMtCGrpSrcUptime indicates the time since this data Multicast Tunnel(MT) entry got created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgDataMtCGrpSrcDataMtThreshold 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.10
The value of vRtrPimNgDataMtCGrpSrcDataMtThreshold indicates the threshold in kilo-bits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a Data Multicast Tunnel (MT) only if the C-(S,G)'s rate exceeds this configured threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgDataMtCGrpSrcIfIndex 1.3.6.1.4.1.6527.3.1.2.50.2.8.1.11
The value of vRtrPimNgDataMtCGrpSrcIfIndex indicates the interface index of the Multicast Data Tunnel(Data MT) interface. This value will be non-zero integer value specific to the router.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgAnycastRPTableLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.20
The value of vRtrPimNgAnycastRPTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgAnycastRPTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgAnycastRPTable 1.3.6.1.4.1.6527.3.1.2.50.1.21
vRtrPimNgAnycastRPTable contains a list of configured anycast Rendezvous Point (RP) addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgAnycastRPEntry

vRtrPimNgAnycastRPEntry 1.3.6.1.4.1.6527.3.1.2.50.1.21.1
Each row entry in the vRtrPimNgAnycastRPTable represents a configured anycast Rendezvous Point(RP). An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgAnycastRPRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgAnycastRPEntry  

vRtrPimNgAnycastRPAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.21.1.1
The value of vRtrPimNgAnycastRPAddressType indicates the address type of vRtrPimNgAnycastRPAddress address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAnycastRPAddress 1.3.6.1.4.1.6527.3.1.2.50.1.21.1.2
The value of vRtrPimNgAnycastRPAddress indicates the Rendezvous Point (RP) anycast address that should be used by the router for the range of multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgAnycastRPPeerAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.21.1.3
The value of vRtrPimNgAnycastRPPeerAddrType indicates the address type of vRtrPimNgAnycastRPPeerAddress address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgAnycastRPPeerAddress 1.3.6.1.4.1.6527.3.1.2.50.1.21.1.4
The value of vRtrPimNgAnycastRPPeerAddress indicates the Peer's Rendezvous Point (RP) anycast address that should be used by the router for the range of multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgAnycastRPRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.21.1.5
The value of vRtrPimNgAnycastRPRowStatus is used to create or destroy entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgAnycastRPRowLstChanged 1.3.6.1.4.1.6527.3.1.2.50.1.21.1.6
The value of vRtrPimNgAnycastRPRowLstChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgSptSwOvrThdTabLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.22
The value of vRtrPimNgSptSwOvrThdTabLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgSptSwitchoverThdTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgSptSwitchoverThdTable 1.3.6.1.4.1.6527.3.1.2.50.1.23
vRtrPimNgSptSwitchoverThdTable configures shortest path tree(spt tree) switchover thresholds for group prefixes. PIM-SM routers with directly connected routers receive multicast traffic initially on a shared tree rooted at the Rendezvous Point (RP). Once the traffic arrives on the shared tree and the source of the traffic is known, a switchover to the spt tree rooted at the source is attempted. For a group that falls in the range of a prefix configured in the table, the corresponding threshold value determines when the router should switch over from the shared tree to the source specific tree. The switchover is attempted only if the traffic rate on the shared tree for the group exceeds the configured threshold. In the absence of any matching prefix in the table, the default behavior is to switchover when the first packet is seen. In the presence of multiple prefixes matching a given group, the most specific entry is used.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgSptSwitchoverThdEntry

vRtrPimNgSptSwitchoverThdEntry 1.3.6.1.4.1.6527.3.1.2.50.1.23.1
Each row entry in the vRtrPimNgSptSwitchoverThdEntry represents a group prefix and the corresponding shortest path tree (spt tree) switchover threshold it has to use. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgSptSwovrThdRowStatus. The SET request must specify the group prefix as well as the threshold, or else the entry will not be created.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgSptSwitchoverThdEntry  

vRtrPimNgSptSwOvrThdTblGpAdType 1.3.6.1.4.1.6527.3.1.2.50.1.23.1.1
The value of vRtrPimNgSptSwOvrThdTblGpAdType indicates the address type of vRtrPimNgSptSwOvrThdTblGrpAddr address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgSptSwOvrThdTblGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.23.1.2
The value of vRtrPimNgSptSwOvrThdTblGrpAddr indicates the group address for which the threshold can be configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgSptSwOvrThdTblGpAdMask 1.3.6.1.4.1.6527.3.1.2.50.1.23.1.3
The value of vRtrPimNgSptSwOvrThdTblGpAdMask indicates the mask for the group address vRtrPimNgSptSwOvrThdTblGrpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgSptSwovrThdRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.23.1.4
The value of vRtrPimNgSptSwovrThdRowStatus is used to create or destroy entries in this table. A row creation attempt will fail if vRtrPimNgSptSwitchoverThd is not explicitly set to a value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgSptSwovrThdRowLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.23.1.5
The value of vRtrPimNgSptSwovrThdRowLstChngd indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgSptSwitchoverThd 1.3.6.1.4.1.6527.3.1.2.50.1.23.1.6
The value of vRtrPimNgSptSwitchoverThd indicates the configured threshold in kilo-bits per second(kbps) for a group prefix. A switchover is attempted only if the traffic rate on the shared tree for the group exceeds this configured threshold. The value of 4294967295 indicates that there will be no switchover from RPT to SPT and traffic will continue through RPT. This value means 'infinity'. When there is no row in this table, switchover from RPT to SPT is done on the first packet. A row creation attempt will fail if this object is not explicitly set to a value.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vRtrPimNgDataMtThdTableLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.24
The value of vRtrPimNgDataMtThdTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgDataMtThdTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgDataMtThdTable 1.3.6.1.4.1.6527.3.1.2.50.1.25
vRtrPimNgDataMtThdTable configures Multicast Data Tunnel(Data MT) thresholds for group prefixes. Whenever the threshold of a C-(S,G)'s exceeds the configured threshold value specified by vRtrPimNgDataMtThd in this table, a MT interface is created in vRtrPimNgDataMtTable. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the MT interface is automatically deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgDataMtThdEntry

vRtrPimNgDataMtThdEntry 1.3.6.1.4.1.6527.3.1.2.50.1.25.1
Each row entry in the vRtrPimNgDataMtThdEntry represents a group prefix and the corresponding Data MT threshold it has to use. An entry in this table can be created or destroyed by an SNMP SET request to vRtrPimNgDataMtThdRowStatus. The SET request must specify the group prefix as well as the threshold, or else the entry will not be created.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgDataMtThdEntry  

vRtrPimNgDataMtThdTblGrpAdrType 1.3.6.1.4.1.6527.3.1.2.50.1.25.1.1
The value of vRtrPimNgDataMtThdTblGrpAdrType indicates the address type of vRtrPimNgDataMtThdTblGrpAddr address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgDataMtThdTblGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.25.1.2
The value of vRtrPimNgDataMtThdTblGrpAddr indicates the group address for which the threshold can be configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgDataMtThdTblGrpAdrMask 1.3.6.1.4.1.6527.3.1.2.50.1.25.1.3
The value of vRtrPimNgDataMtThdTblGrpAdrMask indicates the mask for the group address vRtrPimNgSptSwOvrThdTblGrpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgDataMtThdRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.25.1.4
The value of vRtrPimNgDataMtThdRowStatus is used to create or destroy entries in this table. A row creation attempt will fail if vRtrPimNgDataMtThd is not explicitly set to a value.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgDataMtThdRowLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.25.1.5
The value of vRtrPimNgDataMtThdRowLstChngd indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgDataMtThd 1.3.6.1.4.1.6527.3.1.2.50.1.25.1.6
The value of vRtrPimNgDataMtThd indicates the configured threshold in kilo bits per second(bps) for a group prefix. A MT interface is created only if the traffic rate on the C-(S,G)'s for the group exceeds this configured threshold. A row creation attempt will fail if this object is not explicitly set to a value.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967294  

vRtrPimNgIfMcacLevelTblLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.26
The value of vRtrPimNgIfMcacLevelTblLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfMcacLevelTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfMcacLevelTable 1.3.6.1.4.1.6527.3.1.2.50.1.27
The vRtrPimNgIfMcacLevelTable has an entry for each multicast CAC policy constraint level configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgIfMcacLevelEntry

vRtrPimNgIfMcacLevelEntry 1.3.6.1.4.1.6527.3.1.2.50.1.27.1
Each row entry represents a particular multicast CAC policy level constraints. Entries are created/deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgIfMcacLevelEntry  

vRtrPimNgIfMcacLevelRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.27.1.1
The value of vRtrPimNgIfMcacLevelRowStatus is used for creation/deletion of level constraint in a CAC policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgIfMcacLvlRowLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.27.1.2
The value of vRtrPimNgIfMcacLvlRowLstChngd indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfMcacLevelBW 1.3.6.1.4.1.6527.3.1.2.50.1.27.1.3
The value of vRtrPimNgIfMcacLevelBW specifies the bandwidth in kilo-bits per second(kbps) for the level.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfMcacLagTableLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.28
The value of vRtrPimNgIfMcacLagTableLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfMcacLagTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfMcacLagTable 1.3.6.1.4.1.6527.3.1.2.50.1.29
The vRtrPimNgIfMcacLagTable has an entry for each lag port configured for a multicast CAC policy bundle on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgIfMcacLagEntry

vRtrPimNgIfMcacLagEntry 1.3.6.1.4.1.6527.3.1.2.50.1.29.1
Each row entry represents a particular multicast CAC lag port constraints. Entries are created/deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgIfMcacLagEntry  

vRtrPimNgIfMcacLagRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.29.1.1
The value of vRtrPimNgIfMcacLagRowStatus is used for creation/deletion of lag constraint in a CAC policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgIfMcacLagRowLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.29.1.2
The value of vRtrPimNgIfMcacLagRowLstChngd indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfMcacLagLevel 1.3.6.1.4.1.6527.3.1.2.50.1.29.1.3
The value of vRtrPimNgIfMcacLagLevel specifies the level id to use when the value of tmnxMcacLagPortsDown matches the actual number of ports down in a lag. Using the value of vRtrPimNgIfMcacLagLevel as an index, the operational interface unconstrained bandwidth will be set to vRtrPimNgIfMcacLevelBW. By default for all lag constraints the interface level will be set to 1 at row creation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

vRtrPimNgERPGrpPrfxTblLstChnged 1.3.6.1.4.1.6527.3.1.2.50.1.30
The value of vRtrPimNgERPGrpPrfxTblLstChnged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgERPGrpPrefixTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgERPGrpPrefixTable 1.3.6.1.4.1.6527.3.1.2.50.1.31
vRtrPimNgERPGrpPrefixTable lists the group ranges for embedded RP address information. RP address information can only be embedded in the IPv6 multicast group addresses. Multicast groups in the default group range (FF70::/12 to FFF0::/12) are always checked for embedded RP address information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgERPGrpPrefixEntry

vRtrPimNgERPGrpPrefixEntry 1.3.6.1.4.1.6527.3.1.2.50.1.31.1
An entry in the vRtrPimNgERPGrpPrefixTable. Each entry represents the group range for embedded RP address information.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgERPGrpPrefixEntry  

vRtrPimNgERPGrpPrfixGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.31.1.1
The value of vRtrPimNgERPGrpPrfixGrpAddrType indicates the type of address represented by vRtrPimNgERPGrpPrefixGrpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgERPGrpPrefixGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.31.1.2
The value of vRtrPimNgERPGrpPrefixGrpAddr combined with the value of vRtrPimNgERPGrpPrefixGrpMask indicates the range of multicast group addresses for which RP address information can be embedded.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(16)  

vRtrPimNgERPGrpPrefixGrpMask 1.3.6.1.4.1.6527.3.1.2.50.1.31.1.3
The value of vRtrPimNgERPGrpPrefixGrpMask indicates the mask which is combined with the value of vRtrPimNgERPGrpPrefixGrpAddr to get the range of multicast group addresses for which RP address information can be embedded.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgERPGrpPrefixRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.31.1.4
The value of vRtrPimNgERPGrpPrefixRowStatus is used to create or destroy entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgRsvpIfTable 1.3.6.1.4.1.6527.3.1.2.50.1.32
The table listing the interfaces on which PIM protocol operation is enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgRsvpIfEntry

vRtrPimNgRsvpIfEntry 1.3.6.1.4.1.6527.3.1.2.50.1.32.1
Each row entry in the vRtrPimNgRsvpIfTable represents a tunnel interface on this router that participates in the PIM protocol. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgRsvpIfEntry  

vRtrPimNgRsvpIfLspName 1.3.6.1.4.1.6527.3.1.2.50.1.32.1.1
The value of vRtrPimNgRsvpIfLspName indicates the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

vRtrPimNgRsvpIfSenderAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.32.1.2
The value of vRtrPimNgRsvpIfSenderAddrType indicates the type for vRtrPimNgRsvpIfSenderAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgRsvpIfSenderAddr 1.3.6.1.4.1.6527.3.1.2.50.1.32.1.3
The value of vRtrPimNgRsvpIfSenderAddr indicates the sender address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgRsvpIfRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.32.1.4
The value of vRtrPimNgRsvpIfRowStatus is used to create or delete an entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgRsvpIfOperState 1.3.6.1.4.1.6527.3.1.2.50.1.32.1.5
The value of vRtrPimNgRsvpIfOperState indicates the current operational state of PIM protocol on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrPimNgRsvpIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.32.1.6
The unique value of vRtrPimNgRsvpIfIndex identifies this tunnel interface for this virtual router in the Alcatel-Lucent SROS system. It is a unique value among entries with the same value of vRtrID.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgCRPGpPfxInetTblLstChngd 1.3.6.1.4.1.6527.3.1.2.50.1.33
The value of vRtrPimNgCRPGpPfxInetTblLstChngd indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgCRPGrpPrefixInetTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgCRPGrpPrefixInetTable 1.3.6.1.4.1.6527.3.1.2.50.1.34
vRtrPimNgCRPGrpPrefixInetTable lists the group prefixes for which the router sends the Candidate RP Advertizement.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgCRPGrpPrefixInetEntry

vRtrPimNgCRPGrpPrefixInetEntry 1.3.6.1.4.1.6527.3.1.2.50.1.34.1
An entry in the vRtrPimNgCRPGrpPrefixInetTable. Each entry represents the group prefix for which the router sends the Candidate RP Advertizement(CRP-Adv). CRP-Adv messages are sent to the Elected BSR router(E-BSR).
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgCRPGrpPrefixInetEntry  

vRtrPimNgCRPGrpPfxInetGrpAdrType 1.3.6.1.4.1.6527.3.1.2.50.1.34.1.1
The value of vRtrPimNgCRPGrpPfxInetGrpAdrType indicates the type of address represented by vRtrPimNgCRPGrpPrefixInetGrpAddr.The value 'unknown (0)' is not valid for this index object.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgCRPGrpPrefixInetGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.34.1.2
The value of vRtrPimNgCRPGrpPrefixInetGrpAddr combined with the value of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the range of multicast group addresses for which the router advertizes to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgCRPGrpPrefixInetGrpMask 1.3.6.1.4.1.6527.3.1.2.50.1.34.1.3
The value of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the mask which is combined with the value of vRtrPimNgCRPGrpPrefixInetGrpAddr to get the range of multicast group addresses for which the router advertizes to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgCRPGrpPrfxInetRowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.34.1.4
The value of vRtrPimNgCRPGrpPrfxInetRowStatus specifies the row status of the group prefix entry for the Candidate RP Advertizement. Row status is used for creation and deletion of vRtrPimNgCRPGrpPrefixInetTable entries.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgCRPGrpPfxInetRowLstChgd 1.3.6.1.4.1.6527.3.1.2.50.1.34.1.5
The value of vRtrPimNgCRPGrpPfxInetRowLstChgd indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgCRPInetTable 1.3.6.1.4.1.6527.3.1.2.50.1.35
vRtrPimNgCRPInetTable lists the C-RP's and the group prefixes sent in the C-RP advertisement. vRtrPimNgCRPInetTable will be empty on all routers except the elected BSR router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgCRPInetEntry

vRtrPimNgCRPInetEntry 1.3.6.1.4.1.6527.3.1.2.50.1.35.1
An entry in the vRtrPimNgCRPInetTable. It is created when the Elected BSR receives a Candidate-RP Advertizement from the C-RP's.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgCRPInetEntry  

vRtrPimNgCRPInetAddressType 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.1
The value of vRtrPimNgCRPInetAddressType indicates the type of address of the Candidate RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgCRPInetAddress 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.2
The value of vRtrPimNgCRPInetAddress indicates the Candidate RP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgCRPInetGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.3
The value of vRtrPimNgCRPInetGrpAddrType indicates the type of the address represented by vRtrPimNgCRPInetGrpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgCRPInetGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.4
The value of vRtrPimNgCRPInetGrpAddr combined with the value of vRtrPimNgCRPInetGrpMask indicates the range of multicast group addresses for which vRtrPimNgCRPInetAddress is the Candidate RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgCRPInetGrpMask 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.5
The value of vRtrPimNgCRPInetGrpMask indicates the mask which is combined with vRtrPimNgCRPInetGrpAddr to get the range of multicast group addresses for which vRtrPimNgCRPInetAddress is the Candidate RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgCRPInetHoldtime 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.6
The value of vRtrPimNgCRPInetHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgCRPInetPriority 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.7
The value of vRtrPimNgCRPInetPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgCRPInetExpiryTime 1.3.6.1.4.1.6527.3.1.2.50.1.35.1.8
The value of vRtrPimNgCRPInetExpiryTime indicates the minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgRPSetInetTable 1.3.6.1.4.1.6527.3.1.2.50.1.36
This table lists the RP Set sent by the Elected BSR in the Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent in case of Auto-RP. It also contains the static entries in vRtrPimNgStGrptoRPTable. The router uses this table to calculate the group-to-RP mappings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgRPSetInetEntry

vRtrPimNgRPSetInetEntry 1.3.6.1.4.1.6527.3.1.2.50.1.36.1
An entry in the vRtrPimNgRPSetInetTable. It is created by the elected BSR when it receives the Candidate-RP-Adv messages. Other routers create this entry on receiving Bootstrap Message(BSM) sent by the elected BSR router. It can also be created when a router receives a Mapping message from the Auto-RP Mapping Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgRPSetInetEntry  

vRtrPimNgRPSetInetType 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.1
vRtrPimNgRPSetInetType is an index into this table. It indicates whether the entry was learned through the bootstrap mechanism, the Auto-RP mechanism or if it was statically configured using the vRtrPimNgStGrptoRPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER dynamic(1), static(2), auto-rp(3)  

vRtrPimNgRPSetInetGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.2
The value of vRtrPimNgRPSetInetGrpAddrType indicates the type of address represented by vRtrPimNgRPSetInetGrpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgRPSetInetGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.3
The value of vRtrPimNgRPSetInetGrpAddr, combined with the value of vRtrPimNgRPSetInetGrpMask, indicates the range of multicast group addresses for which vRtrPimNgRPSetInetCRPAddress is the Candidate RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRPSetInetGrpMask 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.4
The value of vRtrPimNgRPSetInetGrpMask indicates the mask which is combined with vRtrPimNgRPSetInetGrpAddr to get the range of multicast group addresses for which vRtrPimNgRPSetInetCRPAddress is the candidate RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrPimNgRPSetInetCRPAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.5
The value of vRtrPimNgRPSetInetCRPAddrType indicates the type of address of the Candidate RP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgRPSetInetCRPAddress 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.6
The value of vRtrPimNgRPSetInetCRPAddress indicates the Candidate RP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRPSetInetHoldtime 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.7
The value of vRtrPimNgRPSetInetHoldtime indicates the hold time of the candidate RP. It is used by the bootstrap router to timeout the RP entries if it does not listen to another C-RP advertisement within the holdtime period. The value of vRtrPimNgRPSetInetHoldtime will be zero for static entries.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgRPSetInetPriority 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.8
The value of vRtrPimNgRPSetInetPriority indicates the Candidate RP's priority for becoming a rendezvous point (RP). This value is used to elect RP for a group range. A value of 0 is considered as the highest priority. For static entries, the priority is always 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrPimNgRPSetInetExpiryTime 1.3.6.1.4.1.6527.3.1.2.50.1.36.1.9
The value of vRtrPimNgRPSetInetExpiryTime indicates the minimum time remaining before the RP Set group prefix will be declared down.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgIfSecNbrTblLstChanged 1.3.6.1.4.1.6527.3.1.2.50.2.9
The value of vRtrPimNgIfSecNbrTblLstChanged indicates the sysUpTime at the time of the last modification of an entry in the vRtrPimNgIfSecNbrTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgIfSecNbrTable 1.3.6.1.4.1.6527.3.1.2.50.2.10
The table lists the secondary addresses advertised by PIM neighbor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgIfSecNbrEntry

vRtrPimNgIfSecNbrEntry 1.3.6.1.4.1.6527.3.1.2.50.2.10.1
Each row entry represents each secondary address advertised by each of the router's PIM neighbors. The Address List Option advertises all the secondary addresses associated with the source interface of the router originating the HELLO message. Entries in this table cannot be created or deleted using SNMP.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgIfSecNbrEntry  

vRtrPimNgIfSecNbrAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.10.1.1
The value of vRtrPimNgIfSecNbrAddrType indicates the type of IP address of the PIM secondary neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgIfSecNbrAddress 1.3.6.1.4.1.6527.3.1.2.50.2.10.1.2
The value of vRtrPimNgIfSecNbrAddress indicates the IP address of the PIM secondary neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRsvpPmsiTable 1.3.6.1.4.1.6527.3.1.2.50.2.11
The table lists the RSVP Provider-Network Multicast Service (PMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a Multicast Domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. A PMSI interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the PMSI interface is automatically deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgRsvpPmsiEntry

vRtrPimNgRsvpPmsiEntry 1.3.6.1.4.1.6527.3.1.2.50.2.11.1
An entry in the vRtrPimNgRsvpPmsiTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgRsvpPmsiEntry  

vRtrPimNgRsvpPmsiExtTunlAdrType 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.1
The value of vRtrPimNgRsvpPmsiExtTunlAdrType indicates the address type of vRtrPimNgRsvpPmsiExtTunnelAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgRsvpPmsiExtTunnelAddr 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.2
The value of vRtrPimNgRsvpPmsiExtTunnelAddr indicates the extended Tunnel address for a PMSI.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRsvpPmsiTunnelId 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.3
The value of vRtrPimNgRsvpPmsiTunnelId indicates the Source RSVP Tunnel Identifier for a PMSI.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgRsvpPmsiP2MPId 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.4
The value of vRtrPimNgRsvpPmsiP2MPId indicates the P2MP Identifier for a PMSI.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgRsvpPmsiIfIndex 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.5
The value of vRtrPimNgRsvpPmsiIfIndex indicates the interface index of the RSVP PMSI. This value will be non-zero integer value specific to the router.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgRsvpPmsiUptime 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.6
The value of vRtrPimNgRsvpPmsiUptime indicates the time since this RSVP PMSI entry got created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgRsvpPmsiNumVpnSGs 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.7
The value of vRtrPimNgRsvpPmsiNumVpnSGs indicates the number of C-(S,G)'s mapped to this PMSI.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgRsvpPmsiIfType 1.3.6.1.4.1.6527.3.1.2.50.2.11.1.8
The value of vRtrPimNgRsvpPmsiIfType indicates whether this PMSI interface is of type transmitter or reciever.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rx(0), tx(1)  

vRtrPimNgRsvpPmsiCGrpSrcTable 1.3.6.1.4.1.6527.3.1.2.50.2.12
The table lists the C-(S,G) mapped to the RSVP Provider-Network Multicast Service Interface (PMSI). An entry in vRtrPimNgRsvpPmsiCGrpSrcTable is created whenever a C-(S,G) is mapped to a PMSI interface. An entry will be deleted automatically when the mapping between C-(S,G) and RSVP PMSI is removed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgRsvpPmsiCGrpSrcEntry

vRtrPimNgRsvpPmsiCGrpSrcEntry 1.3.6.1.4.1.6527.3.1.2.50.2.12.1
An entry in the vRtrPimNgRsvpPmsiCGrpSrcTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgRsvpPmsiCGrpSrcEntry  

vRtrPimRsvpPmsiCGrpSrcGrpAdType 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.1
The value of vRtrPimRsvpPmsiCGrpSrcGrpAdType indicates the address type of vRtrPimRsvpPmsiCGrpSrcGrpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimRsvpPmsiCGrpSrcGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.2
The value of vRtrPimRsvpPmsiCGrpSrcGrpAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimRsvpPmsiCGrpSrcSrcAdType 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.3
The value of vRtrPimRsvpPmsiCGrpSrcSrcAdType indicates the address type of vRtrPimRsvpPmsiCGrpSrcSrcAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimRsvpPmsiCGrpSrcSrcAddr 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.4
The value of vRtrPimRsvpPmsiCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimRsvpPmsiCGrpSrcState 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.5
The value of vRtrPimRsvpPmsiCGrpSrcState indicates the state of this PMSI (S,G). If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is allocating a RSVP PMSI, the state will be 'txJoinPending'. The state will change to 'txJoined' when the (C-S,G) traffic is switched over to the new S-PMSI. If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has bound to the S-PMSI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER txJoinPending(0), txJoined(1), rxNotJoined(2), rxJoined(3)  

vRtrPimRsvpPmsiCGrpSrcJoinTimer 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.6
The value of vRtrPimRsvpPmsiCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the S-PMSI group. After providing sufficient time for all PE's to join the S-PMSI, the transmitting PE switches the given multicast stream to the S-PMSI. The PE router connected to the source then starts encapsulating traffic using the S-PMSI group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimRsvpPmsiCGrpSrcHldDnTimer 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.7
The value of vRtrPimRsvpPmsiCGrpSrcHldDnTimer indicates the time interval before which the PE router will switch back to the Default S-PMSI after it started encapsulating packets using the S-PMSI group. This is used to avoid oscillation when traffic is bursty.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimRsvpPmsiCGrpSrcExpTimer 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.8
The value of vRtrPimRsvpPmsiCGrpSrcExpTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers to time out S-PMSI Join Tag Length Value (TLV) received and leave the S-PMSI group. This value must be consistent among PE routers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimRsvpPmsiCGrpSrcUptime 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.9
The value of vRtrPimRsvpPmsiCGrpSrcUptime indicates the time since this entry got created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimDataMtCGrpSrcDataThresh 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.10
The value of vRtrPimDataMtCGrpSrcDataThresh indicates the threshold in kilo-bits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this configured threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimRsvpPmsiCGrpSrcIfIndex 1.3.6.1.4.1.6527.3.1.2.50.2.12.1.11
The value of vRtrPimRsvpPmsiCGrpSrcIfIndex indicates the interface index of the RSVP S-PMSI. This value will be non-zero integer value specific to the router.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgLdpPmsiTable 1.3.6.1.4.1.6527.3.1.2.50.2.13
This table lists the Ldp Provider-Network Multicast Service (PMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a multicast domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. A PMSI interface is created whenever the threshold of a C-(S,G) exceeds the configured threshold value specified by vRtrPimNgDataMtThd. If the data-threshold goes below the value specified by vRtrPimNgDataMtThd, the PMSI interface is automatically deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgLdpPmsiEntry

vRtrPimNgLdpPmsiEntry 1.3.6.1.4.1.6527.3.1.2.50.2.13.1
An entry in the vRtrPimNgLdpPmsiTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgLdpPmsiEntry  

vRtrPimNgLdpPmsiRootAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.13.1.1
The value of vRtrPimNgLdpPmsiRootAddrType indicates the address type of vRtrPimNgLdpPmsiRootAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgLdpPmsiRootAddr 1.3.6.1.4.1.6527.3.1.2.50.2.13.1.2
The value of vRtrPimNgLdpPmsiRootAddr indicates the extended tunnel address for a PMSI.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgLdpPmsiLspId 1.3.6.1.4.1.6527.3.1.2.50.2.13.1.3
The value of vRtrPimNgLdpPmsiLspId indicates the LSP Identifier for a PMSI.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgLdpPmsiIfIndex 1.3.6.1.4.1.6527.3.1.2.50.2.13.1.4
The value of vRtrPimNgLdpPmsiIfIndex indicates the interface index of the Ldp PMSI. This value will be non-zero integer value specific to the router.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgLdpPmsiUptime 1.3.6.1.4.1.6527.3.1.2.50.2.13.1.5
The value of vRtrPimNgLdpPmsiUptime indicates the time since the Ldp PMSI entry was created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgLdpPmsiNumVpnSGs 1.3.6.1.4.1.6527.3.1.2.50.2.13.1.6
The value of vRtrPimNgLdpPmsiNumVpnSGs indicates the number of C-(S,G)'s mapped to this PMSI.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgLdpPmsiIfType 1.3.6.1.4.1.6527.3.1.2.50.2.13.1.7
The value of vRtrPimNgLdpPmsiIfType indicates whether this PMSI interface is of type transmitter or reciever.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rx(0), tx(1)  

vRtrPimNgLdpPmsiCGrpSrcTable 1.3.6.1.4.1.6527.3.1.2.50.2.14
The table lists the C-(S,G) mapped to the Ldp Provider-Network Multicast Service Interface (PMSI). An entry in vRtrPimNgLdpPmsiCGrpSrcTable is created whenever a C-(S,G) is mapped to a PMSI interface. An entry will be deleted automatically when the mapping between C-(S,G) and Ldp PMSI is removed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgLdpPmsiCGrpSrcEntry

vRtrPimNgLdpPmsiCGrpSrcEntry 1.3.6.1.4.1.6527.3.1.2.50.2.14.1
An entry in the vRtrPimNgLdpPmsiCGrpSrcTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgLdpPmsiCGrpSrcEntry  

vRtrPimLdpPmsiCGrpSrcGrpAdType 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.1
The value of vRtrPimLdpPmsiCGrpSrcGrpAdType indicates the address type of vRtrPimLdpPmsiCGrpSrcGrpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimLdpPmsiCGrpSrcGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.2
The value of vRtrPimLdpPmsiCGrpSrcGrpAddr indicates the C-group address. It is the IP version neutral address of the multicast traffic destination address in the VPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimLdpPmsiCGrpSrcSrcAdType 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.3
The value of vRtrPimLdpPmsiCGrpSrcSrcAdType indicates the address type of vRtrPimLdpPmsiCGrpSrcSrcAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimLdpPmsiCGrpSrcSrcAddr 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.4
The value of vRtrPimLdpPmsiCGrpSrcSrcAddr indicates the C-source address. It is the IP version neutral address of the traffic source in the VPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimLdpPmsiCGrpSrcState 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.5
The value of vRtrPimLdpPmsiCGrpSrcState indicates the state of this PMSI (S,G). If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is allocating a Ldp PMSI, the state will be 'txJoinPending'. The state will change to 'txJoined' when the (C-S,G) traffic is switched over to the new S-PMSI. If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has bound to the S-PMSI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER txJoinPending(0), txJoined(1), rxNotJoined(2), rxJoined(3)  

vRtrPimLdpPmsiCGrpSrcJoinTimer 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.6
The value of vRtrPimLdpPmsiCGrpSrcJoinTimer indicates the time interval before the Provider Edge (PE) router connected to the source switches to the S-PMSI group. After providing sufficient time for all PE's to join the S-PMSI, the transmitting PE switches the given multicast stream to the S-PMSI. The PE router connected to the source then starts encapsulating traffic using the S-PMSI group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimLdpPmsiCGrpSrcHldDnTimer 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.7
The value of vRtrPimLdpPmsiCGrpSrcHldDnTimer indicates the time interval before which the PE router will switch back to the Default S-PMSI after it started encapsulating packets using the S-PMSI group. This is used to avoid oscillation when traffic is bursty.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimLdpPmsiCGrpSrcExpTimer 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.8
The value of vRtrPimLdpPmsiCGrpSrcExpTimer indicates the time interval after which the Provider Edge (PE) router connected to the receivers time out S-PMSI Join Tag Length Value (TLV) received and leave the S-PMSI group. This value must be consistent among PE routers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimLdpPmsiCGrpSrcUptime 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.9
The value of vRtrPimLdpPmsiCGrpSrcUptime indicates the time since the entry was created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimLdpDataMtCGrpSrcDataThres 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.10
The value of vRtrPimLdpDataMtCGrpSrcDataThres indicates the threshold in kilo-bits per second(kbps) for the group to which this C-(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this configured threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimLdpPmsiCGrpSrcIfIndex 1.3.6.1.4.1.6527.3.1.2.50.2.14.1.11
The value of vRtrPimLdpPmsiCGrpSrcIfIndex indicates the interface index of the Ldp S-PMSI. This value will be non-zero integer value specific to the router.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgGrpSrcHostTable 1.3.6.1.4.1.6527.3.1.2.50.1.37
This table lists the PIM enabled hosts for an entry in vRtrPimNgGrpSrcTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGrpSrcHostEntry

vRtrPimNgGrpSrcHostEntry 1.3.6.1.4.1.6527.3.1.2.50.1.37.1
An entry in the vRtrPimNgGrpSrcHostTable. Each entry represents the state of the PIM enabled host for every vRtrPimNgGrpSrcEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGrpSrcHostEntry  

vRtrPimNgGrpSrcHostAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.37.1.1
The value of vRtrPimNgGrpSrcHostAddrType indicates the type of IP multicast host address represented by vRtrPimNgGrpSrcHostAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgGrpSrcHostAddress 1.3.6.1.4.1.6527.3.1.2.50.1.37.1.2
The value of vRtrPimNgGrpSrcHostAddress indicates the IP multicast host address for which this entry contains information. If the vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will be zero and vRtrPimNgGrpSrcHostAddress will contain the address of the RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgGrpSrcHostFlags 1.3.6.1.4.1.6527.3.1.2.50.1.37.1.3
The value of vRtrPimNgGrpSrcHostFlags indicates the different lists that this host belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  BITS immediateOifList(0), inheritedOifList(1), inheritedRptOifList(2), localRxInclude(3), localRxExclude(4), joinPruneList(5), lostAssertList(6), sgRptPruneOifList(7)  

vRtrPimNgGrpSrcGrpIfTable 1.3.6.1.4.1.6527.3.1.2.50.1.38
This table lists the PIM enabled group-interfaces for an entry in vRtrPimNgGrpSrcTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgGrpSrcGrpIfEntry

vRtrPimNgGrpSrcGrpIfEntry 1.3.6.1.4.1.6527.3.1.2.50.1.38.1
An entry in the vRtrPimNgGrpSrcGrpIfTable. Each entry represents the state of the PIM enabled group-interfaces for every vRtrPimNgGrpSrcEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgGrpSrcGrpIfEntry  

vRtrPimNgGrpSrcGrpIfFwdSvcId 1.3.6.1.4.1.6527.3.1.2.50.1.38.1.1
The value of vRtrPimNgGrpSrcGrpIfFwdSvcId specifies the forwarding service ID for a group-interface in a retailer context.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxServId  

vRtrPimNgGrpSrcGrpIfIndex 1.3.6.1.4.1.6527.3.1.2.50.1.38.1.2
The unique value which identifies this group-interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrPimNgGrpSrcGrpIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrPimNgGrpSrcGrpIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

vRtrPimNgGrpSrcGrpIfFlags 1.3.6.1.4.1.6527.3.1.2.50.1.38.1.3
The value of vRtrPimNgGrpSrcGrpIfFlags indicates the different lists that this group-interface belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  BITS immediateOifList(0), inheritedOifList(1), inheritedRptOifList(2), localRxInclude(3), localRxExclude(4), joinPruneList(5), lostAssertList(6), sgRptPruneOifList(7)  

vRtrPimNgMvpnUMHPETblLastChg 1.3.6.1.4.1.6527.3.1.2.50.1.39
The value of the object vRtrPimNgMvpnUMHPETblLastChg indicates the time of the last change to any row of vRtrPimNgMvpnUMHPETable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgMvpnUMHPETable 1.3.6.1.4.1.6527.3.1.2.50.1.40
This table represents the mapping between primary and standby peers to support MVPN source redundancy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgMvpnUMHPEEntry

vRtrPimNgMvpnUMHPEEntry 1.3.6.1.4.1.6527.3.1.2.50.1.40.1
An entry in the vRtrPimNgMvpnUMHPETable. Each row represents the standby peer address configured for a primary peer in MVPN.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgMvpnUMHPEEntry  

vRtrPimNgMvpnUMHPEAddrType 1.3.6.1.4.1.6527.3.1.2.50.1.40.1.1
The value of vRtrPimNgMvpnUMHPEAddrType indicates the type of the address assigned to a primary PE indicated by vRtrPimNgMvpnUMHPEAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgMvpnUMHPEAddr 1.3.6.1.4.1.6527.3.1.2.50.1.40.1.2
The value of vRtrPimNgMvpnUMHPEAddr indicates the value of the address assigned to the primary PE to be used in UMH selection for MVPN source redundancy.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgMvpnUMHPERowStatus 1.3.6.1.4.1.6527.3.1.2.50.1.40.1.3
The value of vRtrPimNgMvpnUMHPERowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrPimNgMvpnUMHPELastChanged 1.3.6.1.4.1.6527.3.1.2.50.1.40.1.4
The value of vRtrPimNgMvpnUMHPELastChanged indicates the timestamp of the last change to this row in vRtrPimNgMvpnUMHPETable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrPimNgMvpnUMHPEStandbyAdrTyp 1.3.6.1.4.1.6527.3.1.2.50.1.40.1.5
The value of vRtrPimNgMvpnUMHPEStandbyAdrTyp specifies the type of the address assigned to the standby PE indicated by vRtrPimNgMvpnUMHPEStandbyAddr. This object MUST be specified at row creation time.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgMvpnUMHPEStandbyAddr 1.3.6.1.4.1.6527.3.1.2.50.1.40.1.6
The value of vRtrPimNgMvpnUMHPEStandbyAddr specifies the value of the address assigned to a standby PE to be used in UMH selection for MVPN source redundancy. This value cannot be modified without shutting down the MVPN instance. An address instance of 'vRtrPimNgMvpnUMHPEStandbyAddr' can be associated with only a single address instance of 'vRtrPimNgMvpnUMHPEAddr' or in other words the pairing must be unique. This object MUST be specified at row creation time.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRsvpIPmsiTable 1.3.6.1.4.1.6527.3.1.2.50.2.15
The table lists the RSVP Inclusive Provider-Network Multicast Service (IPMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a Multicast Domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. IPMSI's are used for transmitting the MVPN's multicast data from one PE to others.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgRsvpIPmsiEntry

vRtrPimNgRsvpIPmsiEntry 1.3.6.1.4.1.6527.3.1.2.50.2.15.1
An entry in the vRtrPimNgRsvpIPmsiTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgRsvpIPmsiEntry  

vRtrPimNgRsvpIPmsiExtTunlAdrType 1.3.6.1.4.1.6527.3.1.2.50.2.15.1.1
The value of vRtrPimNgRsvpIPmsiExtTunlAdrType indicates the address type of vRtrPimNgRsvpIPmsiExtTunnelAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgRsvpIPmsiExtTunnelAddr 1.3.6.1.4.1.6527.3.1.2.50.2.15.1.2
The value of vRtrPimNgRsvpIPmsiExtTunnelAddr indicates the extended tunnel address for this IPMSI.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgRsvpIPmsiLspName 1.3.6.1.4.1.6527.3.1.2.50.2.15.1.3
The value of vRtrPimNgRsvpIPmsiLspName indicates the the RSVP point to multipoint (P2MP) lsp name associated with this IPMSI. In case of terminating IPMSI's the value of vRtrPimNgRsvpIPmsiLspName indicates the name of the tunnel interface.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItem  

vRtrPimNgRsvpIPmsiP2MPId 1.3.6.1.4.1.6527.3.1.2.50.2.15.1.4
The value of vRtrPimNgRsvpIPmsiP2MPId indicates the P2MP Identifier associated with this IPMSI.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgRsvpIPmsiTunnelId 1.3.6.1.4.1.6527.3.1.2.50.2.15.1.5
The value of vRtrPimNgRsvpIPmsiTunnelId indicates the tunnel identifier associated with this IPMSI.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgLdpIPmsiTable 1.3.6.1.4.1.6527.3.1.2.50.2.16
This table lists the Ldp Inclusive Provider-Network Multicast Service (IPMSI) interfaces. A PMSI can be thought of as a connector between a set of PE routers forming a multicast domain. From the perspective of a VPN-specific PIM instance, a PMSI is a single multi-access interface. IPMSI's are used for transmitting the MVPN's multicast data from one PE to others.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgLdpIPmsiEntry

vRtrPimNgLdpIPmsiEntry 1.3.6.1.4.1.6527.3.1.2.50.2.16.1
An entry in the vRtrPimNgLdpIPmsiTable. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgLdpIPmsiEntry  

vRtrPimNgLdpIPmsiRootAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.16.1.1
The value of vRtrPimNgLdpIPmsiRootAddrType indicates the address type of vRtrPimNgLdpIPmsiRootAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgLdpIPmsiRootAddr 1.3.6.1.4.1.6527.3.1.2.50.2.16.1.2
The value of vRtrPimNgLdpIPmsiRootAddr indicates the root address for the IPMSI.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgLdpIPmsiLspId 1.3.6.1.4.1.6527.3.1.2.50.2.16.1.3
The value of vRtrPimNgLdpIPmsiLspId indicates the lsp identifier associated with the IPMSI.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgLdpIPmsiLspName 1.3.6.1.4.1.6527.3.1.2.50.2.16.1.4
The value of vRtrPimNgLdpIPmsiLspName indicates the lsp name associated with the IPMSI. In case of terminating IPMSI's the value of vRtrPimNgLdpIPmsiLspName indicates the name of the tunnel interface.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItem  

vRtrPimNgMvpnExtranetTable 1.3.6.1.4.1.6527.3.1.2.50.2.17
This table lists the global MVPN Extranet database. It consists of source MVPN, receiver MVPN and the route to the source.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPimNgMvpnExtranetEntry

vRtrPimNgMvpnExtranetEntry 1.3.6.1.4.1.6527.3.1.2.50.2.17.1
An entry in the vRtrPimNgMvpnExtranetTable represents a pairing of source and receiver MVPN using a particular route. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPimNgMvpnExtranetEntry  

vRtrPimNgMvpnExtranetNHAddrType 1.3.6.1.4.1.6527.3.1.2.50.2.17.1.1
The value of vRtrPimNgMvpnExtranetNHAddrType indicates the address type of vRtrPimNgMvpnExtranetNHAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgMvpnExtranetNHAddr 1.3.6.1.4.1.6527.3.1.2.50.2.17.1.2
The value of vRtrPimNgMvpnExtranetNHAddr indicates the next hop address in order to reach the MVPN where the source is present.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrPimNgMvpnExtranetRD 1.3.6.1.4.1.6527.3.1.2.50.2.17.1.3
The value of vRtrPimNgMvpnExtranetRD indicates the Route Distinguisher used to reach the MVPN where source is present.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVPNRouteDistinguisher  

vRtrPimNgMvpnExtranetSrcMvpn 1.3.6.1.4.1.6527.3.1.2.50.2.17.1.4
The value of vRtrPimNgMvpnExtranetSrcMvpn indicates the souce MVPN id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgMvpnExtranetRecvMvpn 1.3.6.1.4.1.6527.3.1.2.50.2.17.1.5
The value of vRtrPimNgMvpnExtranetRecvMvpn indicates the reciever MVPN id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgMvpnExtranetRecvRefCnt 1.3.6.1.4.1.6527.3.1.2.50.2.17.1.6
The value of vRtrPimNgMvpnExtranetRecvRefCnt indicates the number of recievers in the reciever MVPN which expect to recieve Extranet traffic from this vRtrPimNgMvpnExtranetSrcMvpn.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgNotifySourceIpType 1.3.6.1.4.1.6527.3.1.2.50.3.1
The value of vRtrPimNgNotifySourceIpType indicates the type of the address from which the PIM message originated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgNotifySourceIp 1.3.6.1.4.1.6527.3.1.2.50.3.2
The value of vRtrPimNgNotifySourceIp indicates the address from which the PIM message originated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgNotifyGroupAddrType 1.3.6.1.4.1.6527.3.1.2.50.3.3
The value of vRtrPimNgNotifyGroupAddrType indicates the type of the group address in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgNotifyGroupAddr 1.3.6.1.4.1.6527.3.1.2.50.3.4
The value of vRtrPimNgNotifyGroupAddr indicates the group address in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgNotifyRPAddrType 1.3.6.1.4.1.6527.3.1.2.50.3.5
The value of vRtrPimNgNotifyRPAddrType indicates the type of the RP address on the router corresponding to the group address in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgNotifyRPAddr 1.3.6.1.4.1.6527.3.1.2.50.3.6
The value of vRtrPimNgNotifyRPAddr indicates the RP address on the router corresponding to the group address in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgNotifyWrongRPAddrType 1.3.6.1.4.1.6527.3.1.2.50.3.7
The value of vRtrPimNgNotifyWrongRPAddrType indicates the type of the RP address in the PIM message corresponding to the group address in the message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgNotifyWrongRPAddr 1.3.6.1.4.1.6527.3.1.2.50.3.8
The value of vRtrPimNgNotifyWrongRPAddr indicates the RP address in the PIM message corresponding to the group address in the message. Whenever there is an disagreement between the RP address on the router and the RP address in the PIM message, this object is used by the notifications to send the RP address in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgNotifyMsgType 1.3.6.1.4.1.6527.3.1.2.50.3.9
The value of vRtrPimNgNotifyMsgType indicates the types of PIM message. This object is used by vRtrPimNgGrpInSSMRange notification to identify the type of PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER hello(0), register(1), registerStop(2), joinPrune(3), bootstrap(4), assert(5), graft(6), graftAck(7), crpAdv(8), igmpLocalMembership(9)  

vRtrPimNgWrongMdtDefGrpAddrType 1.3.6.1.4.1.6527.3.1.2.50.3.10
The value of vRtrPimNgWrongMdtDefGrpAddrType indicates the type of address represented by vRtrPimNgWrongMdtDefGrpAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgWrongMdtDefGrpAddr 1.3.6.1.4.1.6527.3.1.2.50.3.11
The value of vRtrPimNgWrongMdtDefGrpAddr indicates the default core group address of the Multicast Distribution Tree(MDT) in the PIM message. Whenever there is a disagreement between the default core group address on the router and the default core group address in the PIM message, this object is used by the notifications to send the default core group address in the the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgWrongPmsiType 1.3.6.1.4.1.6527.3.1.2.50.3.12
The value of vRtrPimNgWrongPmsiType indicates the type of tunnel received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the tunnel type received in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER pimSsm(0), pimSm(1), rsvp(2), ldp(3)  

vRtrPimNgWrongPmsiP2mpId 1.3.6.1.4.1.6527.3.1.2.50.3.13
The value of vRtrPimNgWrongPmsiP2mpId indicates the P2MP Identifier for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP Identifier received in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgWrongPmsiTunnelId 1.3.6.1.4.1.6527.3.1.2.50.3.14
The value of vRtrPimNgWrongPmsiTunnelId indicates the Source RSVP Tunnel Identifier for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the Tunnel Identifier received in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgWrongPmsiExtTunlAdrTyp 1.3.6.1.4.1.6527.3.1.2.50.3.15
The value of vRtrPimNgWrongPmsiExtTunlAdrTyp indicates the address type of vRtrPimNgWrongPmsiExtTunlAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgWrongPmsiExtTunlAddr 1.3.6.1.4.1.6527.3.1.2.50.3.16
The value of vRtrPimNgWrongPmsiExtTunlAddr indicates the Extended Tunnel address for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the Extended Tunnel address received in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgWrongVprnId 1.3.6.1.4.1.6527.3.1.2.50.3.17
The value of vRtrPimNgWrongVprnId indicates the VPRN of the PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the VPRN of the received PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxVRtrID  

vRtrPimNgWrongPmsiLdpLspId 1.3.6.1.4.1.6527.3.1.2.50.3.18
The value of vRtrPimNgWrongPmsiLdpLspId indicates the LSP Identifier for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP Identifier received in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

vRtrPimNgWrongPmsiSenderAdrTyp 1.3.6.1.4.1.6527.3.1.2.50.3.19
The value of vRtrPimNgWrongPmsiSenderAdrTyp indicates the address type of vRtrPimNgWrongPmsiSenderAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrPimNgWrongPmsiSenderAddr 1.3.6.1.4.1.6527.3.1.2.50.3.20
The value of vRtrPimNgWrongPmsiSenderAddr indicates the extended tunnel address for a PMSI received in the PIM message. This object is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the sender address received in the PIM message.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrPimNgIfNeighborLoss 1.3.6.1.4.1.6527.3.1.3.50.0.1
A vRtrPimNgIfNeighborLoss notification is generated when the PIM adjacency with a neighbor is lost.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgIfNeighborUp 1.3.6.1.4.1.6527.3.1.3.50.0.2
A vRtrPimNgIfNeighborUp notification is generated when the PIM adjacency with a new neighbor is established.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgInvalidJoinPrune 1.3.6.1.4.1.6527.3.1.3.50.0.3
A vRtrPimNgInvalidJoinPrune notification is generated when an invalid Join Prune message is received. A Join Prune message is deemed invalid when there is an RP address disagreement between the router and the PIM Join Prune message.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgInvalidRegister 1.3.6.1.4.1.6527.3.1.3.50.0.4
A vRtrPimNgInvalidRegister notification is generated when an invalid PIM Register message is received. A Register message is deemed invalid when there is an RP address disagreement between the router and the PIM Register message.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgGrpInSSMRange 1.3.6.1.4.1.6527.3.1.3.50.0.5
A vRtrPimNgGrpInSSMRange notification is generated when the router receives a register message, a (*,G) assert message, a (*,G) Join Prune message or a IGMP local membership message for the group defined in the SSM address range.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgBSRStateChange 1.3.6.1.4.1.6527.3.1.3.50.0.6
A vRtrPimNgBSRStateChange notification is generated whenever there is a change in the BSR state on the router. vRtrPimNgAFGenBSRState will indicate the current BSR state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgHelloDropped 1.3.6.1.4.1.6527.3.1.3.50.0.7
A vRtrPimNgHelloDropped notification is generated whenever a hello is dropped because the vRtrPimNgIfMulticastSenders flag is set to 'always'.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgSGLimitExceeded 1.3.6.1.4.1.6527.3.1.3.50.0.8
A vRtrPimNgSGLimitExceeded notification is generated when a (S,G) record is failed to be programmed to an IOM because the supported (S,G) limit is exceeded. This limit is currently at 16000 (S,G) entries.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgReplicationLmtExceeded 1.3.6.1.4.1.6527.3.1.3.50.0.9
A vRtrPimNgReplicationLmtExceeded notification is generated when an IOM fails to program an OIF for an (S,G) record because the replication limit for that (S,G) on that IOM has been reached. The replication limit per (S,G) entry on an IOM is currently 127.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgMDTLimitExceeded 1.3.6.1.4.1.6527.3.1.3.50.0.10
A vRtrPimNgMDTLimitExceeded notification is generated when the configuration exceeds the maximum number of Multicast Distribution Trees (MDTs) supported on the system.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgMaxGrpsLimitExceeded 1.3.6.1.4.1.6527.3.1.3.50.0.11
The vRtrPimNgMaxGrpsLimitExceeded event is generated when an attempt is made to configure a group when vRtrPimNgAFIfCurrentGroups, the number of groups configured on the PIM interface, is equal to vRtrPimNgIfMaxGroups, the maximum number of groups supported on the system.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgDataMtReused 1.3.6.1.4.1.6527.3.1.3.50.0.12
The vRtrPimNgDataMtReused event is generated when a data MDT is reused, i.e. a C (S,G) is mapped to a data MDT that is already in use by another C (S,G).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgMcacPlcyDropped 1.3.6.1.4.1.6527.3.1.3.50.0.13
The vRtrPimNgMcacPlcyDropped event is generated when a PIM group is dropped on a given interface because of applying a multicast CAC policy given by vRtrPimNgIfMcacPolicyName.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrPimNgInvalidIPmsiTunnel 1.3.6.1.4.1.6527.3.1.3.50.0.14
[CAUSE1] The vRtrPimNgInvalidIPmsiTunnel event is generated when an invalid default core group address specified by vRtrPimNgWrongMdtDefGrpAddr of the Multicast Distribution Tree(MDT) is received in PIM message from vRtrPimNgNotifySourceIp, instead of the expected addresss specified by vRtrPimNgAFGenMdtDefGrpAddress. It is considered to be a misconfiguration and the message will be dropped. This trap is intended to help network operators recognize the misconfiguration and adjust their configurations accordingly. [CAUSE2] This event is also generated when the tunnel type specified by vRtrPimNgWrongPmsiType is received in PIM message from vRtrPimNgNotifySourceIp which is different from the configured tunnel type. [EFFECT] The PMSI received in the PIM message from vRtrPimNgNotifySourceIp is not processed by PIM. [RECOVERY]: Operator needs to look and adjust the configuration of vRtrPimNgNotifySourceIp in the VPRN specified by vRtrPimNgWrongVprnId. The objects vRtrPimNgWrongPmsiP2mpId, vRtrPimNgWrongPmsiTunnelId and vRtrPimNgWrongPmsiExtTunlAddr in the event vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType is 'rsvp (2)'. The objects vRtrPimNgWrongMdtDefGrpAddrType and vRtrPimNgWrongMdtDefGrpAddr in the event vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType is either 'pimSsm (0)' or 'pimSm (1)'. The objects vRtrPimNgWrongPmsiLdpLspId, vRtrPimNgWrongPmsiSenderAdrTyp and vRtrPimNgWrongPmsiSenderAddr in the event vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType is 'ldp (3)'.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxPimNgCompliances 1.3.6.1.4.1.6527.3.1.1.50.1
OBJECT IDENTIFIER    

tmnxPimNgGroups 1.3.6.1.4.1.6527.3.1.1.50.2
OBJECT IDENTIFIER    

tmnxPimNgCompliance 1.3.6.1.4.1.6527.3.1.1.50.1.1
The compliance statement for management of extended PIM protocol on Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxPimNgV7v0Compliance 1.3.6.1.4.1.6527.3.1.1.50.1.2
The compliance statement for management of extended PIM protocol on Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxPimNgV8v0Compliance 1.3.6.1.4.1.6527.3.1.1.50.1.3
The compliance statement for management of extended PIM protocol on Alcatel-Lucent SROS series systems release 8.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxPimNgV9v0Compliance 1.3.6.1.4.1.6527.3.1.1.50.1.4
The compliance statement for management of extended PIM protocol on Alcatel-Lucent SROS series systems release 9.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxPimNgV10v0Compliance 1.3.6.1.4.1.6527.3.1.1.50.1.5
The compliance statement for management of extended PIM protocol on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxPimNgGlobalGroup 1.3.6.1.4.1.6527.3.1.1.50.2.1
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgGlobalGrpSrcGroup 1.3.6.1.4.1.6527.3.1.1.50.2.2
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfGroup 1.3.6.1.4.1.6527.3.1.1.50.2.3
The group of objects supporting management of extended PIM interfaces on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgNotifyObjsGroup 1.3.6.1.4.1.6527.3.1.1.50.2.4
The group of objects supporting PIM notifications on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgNotificationGroup 1.3.6.1.4.1.6527.3.1.1.50.2.5
The group of notifications supporting PIM protocol on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxPimNgEmbeddedRPV7v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.6
The group of objects supporting embedded RP feature for PIM protocol on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgMvpnV7v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.7
The group of objects supporting PIM protocol MVPN feature on Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgV7v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.8
The group of objects supporting PIM protocol tunnel interfaces on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgGlobalGroupV7v0 1.3.6.1.4.1.6527.3.1.1.50.2.9
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgObsoleteV7v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.10
The group of objects in TIMETRA-PIM-NG-MIB which are obsoleted in Alcatel-Lucent SROS 7.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimIfSecNbrV6v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.11
The group of objects supporting management of extended PIM interface neighbors on Alcatel-Lucent SROS 6.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfStatsV7v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.12
The group of objects supporting management of extended PIM interface statistics on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgObsoleteV6v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.13
The group of objects in TIMETRA-PIM-NG-MIB which are obsoleted in Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgNotificationV7v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.14
The group of notifications supporting PIM protocol on 7.0 release of Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxPimNgNotifyObjsV7v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.15
The group of objects added in the 7.0 release to support PIM notifications.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgMvpnV8v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.16
The group of objects supporting PIM protocol MVPN feature on Alcatel-Lucent SROS 8.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgEchoGroup 1.3.6.1.4.1.6527.3.1.1.50.2.17
The group of objects supporting the management of extended PIM Instant Prune Echo capabilities on Alcatel-Lucent SROS systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfV8v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.19
The group of objects supporting management of extended PIM interfaces on Alcatel-Lucent SROS 8.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgGlobalSSMV6v1Group 1.3.6.1.4.1.6527.3.1.1.50.2.20
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS 6.1 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgGlobalGroupV8v0 1.3.6.1.4.1.6527.3.1.1.50.2.21
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgGlobalGrpSrcV9v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.22
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS series 9.0 systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfIpv6BfdV9v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.23
The group of objects supporting management of extended PIM interfaces on Alcatel-Lucent SROS 9.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgNotifyObjsV8v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.24
The group of objects added in the 8.0 R5 release to support PIM notifications.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgLdpEntryV10v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.25
The group of objects supporting management of mLDP PMSI interfaces on Alcatel-Lucent SROS 10.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgNotifyObjsV9v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.26
The group of objects added in the 9.0 release to support PIM notifications.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgObsoletedV9v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.27
The group of objects obsoleted in release 9.0 of Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgMvpnV9v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.28
The group of objects supporting PIM protocol MVPN feature on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfStatsV9v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.29
The group of objects supporting management of extended PIM interface statistics on Alcatel-Lucent SROS 9.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfV10v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.30
The group of objects supporting management of extended PIM interfaces on Alcatel-Lucent SROS 10.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfIPMSIV9v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.31
The group of objects supporting management of IPMSI interfaces on Alcatel-Lucent SROS 9.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgMvpnV9v0R4Group 1.3.6.1.4.1.6527.3.1.1.50.2.32
The group of objects supporting PIM protocol MVPN feature on version 9.0R4 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgGlobalGroupV10v0 1.3.6.1.4.1.6527.3.1.1.50.2.33
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgIfStatsV10v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.34
The group of objects supporting management of extended PIM interface statistics on Alcatel-Lucent SROS 10.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgMvpnExtranetGroupV10v0 1.3.6.1.4.1.6527.3.1.1.50.2.35
The group of objects supporting PIM protocol MVPN feature on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxPimNgGlobalGrpSrcV10v0Group 1.3.6.1.4.1.6527.3.1.1.50.2.36
The group of objects supporting management of extended PIM general capabilities on Alcatel-Lucent SROS series 10.0 systems
Status: current Access: accessible-for-notify
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor