TIMETRA-PCEP-MIB

File: TIMETRA-PCEP-MIB.mib (74484 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB TIMETRA-GLOBAL-MIB TIMETRA-VRTR-MIB
TIMETRA-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter64 Counter32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TEXTUAL-CONVENTION RowStatus TimeStamp
TruthValue MacAddress InetAddress
InetAddressType InetPortNumber InetAddressPrefixLength
timetraSRMIBModules tmnxSRObjs tmnxSRNotifyPrefix
tmnxSRConfs vRtrID TmnxAdminState
TmnxOperState TNamedItem TNamedItemOrEmpty
TLNamedItemOrEmpty

Defined Types

TmnxPcepCapabilities  
The value of TmnxPcepCapabilities specifies the capabilities supported by this Path Computation Element communications Protocol (PCEP) entity
TEXTUAL-CONVENTION    
  BITS statefulDelegate(0), statefulPce(1), statefulOptimize(2), segmentRtPath(3), rsvpPath(4), opticsGmpls(5), pceInitiatedLsp(6), stateless(7)  

TmnxPcepLspType  
The value of TmnxPcepLspType indicates the type of Label Switch Path (LSP) connection. The valid options are: rsvpP2p (1) - Resource Reservation Protocol-Traffic Engineering (RSVP-TE) Point to Point. rsvpP2mp (2) - RSVP-TE Point to Multipoint. segRt (3) - Segment Routing.
TEXTUAL-CONVENTION    
  INTEGER rsvpP2p(1), rsvpP2mp(2), segRt(3)  

TmnxPcepEntityEntry  
SEQUENCE    
  tmnxPcepEntityIndex Unsigned32
  tmnxPcepEntityRowStatus RowStatus
  tmnxPcepEntityLastChanged TimeStamp
  tmnxPcepEntityType INTEGER
  tmnxPcepEntityAdminState TmnxAdminState
  tmnxPcepEntityLocalAddrType InetAddressType
  tmnxPcepEntityLocalAddr InetAddress
  tmnxPcepEntityKeepAliveInterval Unsigned32
  tmnxPcepEntityDeadTimer Unsigned32
  tmnxPcepEntityMaxUnknownMsgs Unsigned32
  tmnxPcepEntityCapability TmnxPcepCapabilities
  tmnxPcepEntityIsOverloaded TruthValue

TmnxPcepPccEntityEntry  
SEQUENCE    
  tmnxPcepPccEntityLastChanged TimeStamp
  tmnxPcepPccEntityAddrType InetAddressType
  tmnxPcepPccEntityAddr InetAddress
  tmnxPcepPccEntityReportPathConst TruthValue

TmnxPcepPccPeerEntry  
SEQUENCE    
  tmnxPcepPccPeerAddrType InetAddressType
  tmnxPcepPccPeerAddr InetAddress
  tmnxPcepPccPeerRowStatus RowStatus
  tmnxPcepPccPeerLastChanged TimeStamp
  tmnxPcepPccPeerAdminState TmnxAdminState
  tmnxPcepPccPeerOperState TmnxOperState
  tmnxPcepPccPeerSpeakerId OCTET STRING
  tmnxPcepPccPeerCapability TmnxPcepCapabilities
  tmnxPcepPccPeerSyncState INTEGER
  tmnxPcepPccPeerIsOverloaded TruthValue
  tmnxPcepPccPeerSessEstablishTime TimeStamp
  tmnxPcepPccPeerOperKeepAlive Unsigned32
  tmnxPcepPccPeerOperDeadTimer Unsigned32

TmnxPcepPcePeerEntry  
SEQUENCE    
  tmnxPcepPcePeerAddrType InetAddressType
  tmnxPcepPcePeerAddr InetAddress
  tmnxPcepPcePeerPort InetPortNumber
  tmnxPcepPcePeerCapability TmnxPcepCapabilities
  tmnxPcepPcePeerSyncState INTEGER
  tmnxPcepPcePeerSpeakerId OCTET STRING
  tmnxPcepPcePeerSessEstablishTime TimeStamp
  tmnxPcepPcePeerOperKeepAlive Unsigned32
  tmnxPcepPcePeerOperDeadTimer Unsigned32

TmnxPcepPccReqMsgInfoEntry  
SEQUENCE    
  tmnxPcepPccReqMsgRequestId Unsigned32
  tmnxPcepPccReqMsgLspType TmnxPcepLspType
  tmnxPcepPccReqMsgTunnelId Unsigned32
  tmnxPcepPccReqMsgLspId Unsigned32
  tmnxPcepPccReqMsgExtTunnelIdType InetAddressType
  tmnxPcepPccReqMsgExtTunnelId InetAddress
  tmnxPcepPccReqMsgLspName TLNamedItemOrEmpty
  tmnxPcepPccReqMsgSrcAddrType InetAddressType
  tmnxPcepPccReqMsgSrcAddr InetAddress
  tmnxPcepPccReqMsgDstAddrType InetAddressType
  tmnxPcepPccReqMsgDstAddr InetAddress
  tmnxPcepPccReqMsgState INTEGER
  tmnxPcepPccReqMsgSvecId Counter64
  tmnxPcepPccReqMsgIgpMetric Unsigned32
  tmnxPcepPccReqMsgTeMetric Unsigned32
  tmnxPcepPccReqMsgHopCount Unsigned32
  tmnxPcepPccReqMsgMetricBound BITS
  tmnxPcepPccReqMsgMetricCompute BITS
  tmnxPcepPccReqMsgLclProtDesired TruthValue
  tmnxPcepPccReqMsgSetupPriority Unsigned32
  tmnxPcepPccReqMsgHoldingPriority Unsigned32
  tmnxPcepPccReqMsgExcludeAny Unsigned32
  tmnxPcepPccReqMsgIncludeAny Unsigned32
  tmnxPcepPccReqMsgIncludeAll Unsigned32
  tmnxPcepPccReqMsgPriority Unsigned32
  tmnxPcepPccReqMsgReoptimization TruthValue
  tmnxPcepPccReqMsgBidirectional TruthValue
  tmnxPcepPccReqMsgStrictLoose TruthValue
  tmnxPcepPccReqMsgLspBandwidth Unsigned32
  tmnxPcepPccReqMsgMaxSrLabels Unsigned32

TmnxPcepPccReqPathProfInfoEntry  
SEQUENCE    
  tmnxPcepPccReqPathProf1 Unsigned32
  tmnxPcepPccReqExtendedPathProf1 Unsigned32
  tmnxPcepPccReqPathProf2 Unsigned32
  tmnxPcepPccReqExtendedPathProf2 Unsigned32
  tmnxPcepPccReqPathProf3 Unsigned32
  tmnxPcepPccReqExtendedPathProf3 Unsigned32
  tmnxPcepPccReqPathProf4 Unsigned32
  tmnxPcepPccReqExtendedPathProf4 Unsigned32
  tmnxPcepPccReqPathProf5 Unsigned32
  tmnxPcepPccReqExtendedPathProf5 Unsigned32

TmnxPcepPccLspUpdateInfoEntry  
SEQUENCE    
  tmnxPcepPccLspUpdPLspId Unsigned32
  tmnxPcepPccLspUpdLspId Unsigned32
  tmnxPcepPccLspUpdLspType TmnxPcepLspType
  tmnxPcepPccLspUpdTunnelId Unsigned32
  tmnxPcepPccLspUpdExtTunnelIdType InetAddressType
  tmnxPcepPccLspUpdExtTunnelId InetAddress
  tmnxPcepPccLspUpdLspName TLNamedItemOrEmpty
  tmnxPcepPccLspUpdSenderType InetAddressType
  tmnxPcepPccLspUpdSenderAddr InetAddress
  tmnxPcepPccLspUpdSourceType InetAddressType
  tmnxPcepPccLspUpdSourceAddr InetAddress
  tmnxPcepPccLspUpdDestinationType InetAddressType
  tmnxPcepPccLspUpdDestinationAddr InetAddress
  tmnxPcepPccLspUpdLspDelegated TruthValue
  tmnxPcepPccLspUpdDelgatdPeerType InetAddressType
  tmnxPcepPccLspUpdDelgatdPeerAddr InetAddress
  tmnxPcepPccLspUpdOperState INTEGER
  tmnxPcepPccLspUpdLspError INTEGER
  tmnxPcepPccLspUpdState INTEGER

TmnxPcepPeerStatsEntry  
SEQUENCE    
  tmnxPcepPeerAddrType InetAddressType
  tmnxPcepPeerAddr InetAddress
  tmnxPcepPeerNumPCRptSent Counter32
  tmnxPcepPeerNumPCRptRcvd Counter32
  tmnxPcepPeerNumPCUpdSent Counter32
  tmnxPcepPeerNumPCUpdRcvd Counter32
  tmnxPcepPeerNumRptSent Counter32
  tmnxPcepPeerNumRptRcvd Counter32

Defined Values

timetraPcepMIBModule 1.3.6.1.4.1.6527.1.1.3.101
This document is the SNMP MIB module for the Nokia SROS implementation of Path Computation Element communications Protocol (PCEP). Copyright 2003-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxPcepObjects 1.3.6.1.4.1.6527.3.1.2.101
OBJECT IDENTIFIER    

tmnxPcepTableChangedObjects 1.3.6.1.4.1.6527.3.1.2.101.1
OBJECT IDENTIFIER    

tmnxPcepConfigObjects 1.3.6.1.4.1.6527.3.1.2.101.2
OBJECT IDENTIFIER    

tmnxPcepPccConfigObjects 1.3.6.1.4.1.6527.3.1.2.101.2.1
OBJECT IDENTIFIER    

tmnxPcepPceConfigObjects 1.3.6.1.4.1.6527.3.1.2.101.2.2
OBJECT IDENTIFIER    

tmnxPcepStatsObjects 1.3.6.1.4.1.6527.3.1.2.101.3
OBJECT IDENTIFIER    

tmnxPcepPccStatsObjects 1.3.6.1.4.1.6527.3.1.2.101.3.1
OBJECT IDENTIFIER    

tmnxPcepPceStatsObjects 1.3.6.1.4.1.6527.3.1.2.101.3.2
OBJECT IDENTIFIER    

tmnxPcepPeerStatsObjects 1.3.6.1.4.1.6527.3.1.2.101.3.3
OBJECT IDENTIFIER    

tmnxPcepNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.101
OBJECT IDENTIFIER    

tmnxPcepNotification 1.3.6.1.4.1.6527.3.1.3.101.0
OBJECT IDENTIFIER    

tmnxPcepConformance 1.3.6.1.4.1.6527.3.1.1.101
OBJECT IDENTIFIER    

tmnxPcepCompliances 1.3.6.1.4.1.6527.3.1.1.101.1
OBJECT IDENTIFIER    

tmnxPcepGroups 1.3.6.1.4.1.6527.3.1.1.101.2
OBJECT IDENTIFIER    

tmnxPcepEntityTableLastChanged 1.3.6.1.4.1.6527.3.1.2.101.1.1
The value of tmnxPcepEntityTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tmnxPcepEntityTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepEntityTable 1.3.6.1.4.1.6527.3.1.2.101.2.3
The tmnxPcepEntityTable contains information about local Path Computation Element communications Protocol (PCEP) entities.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepEntityEntry

tmnxPcepEntityEntry 1.3.6.1.4.1.6527.3.1.2.101.2.3.1
The value of tmnxPcepEntityEntry represents a local PCEP entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepEntityEntry  

tmnxPcepEntityIndex 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.1
The value of tmnxPcepEntityIndex specifies the unique identifier for this PCEP entity. The value of tmnxPcepEntityIndex can only be set to 1, when the value of tmnxPcepEntityType is set to 'pcc (1)'. The value of tmnxPcepEntityIndex can only be set to 2, when the value of tmnxPcepEntityType is set to 'pce (2)'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

tmnxPcepEntityRowStatus 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.2
The value of tmnxPcepEntityRowStatus controls the creation and deletion of rows in this entity table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxPcepEntityLastChanged 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.3
The value of tmnxPcepEntityLastChanged indicates the sysUpTime at the time of the most recent change to this entity row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepEntityType 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.4
The value of tmnxPcepEntityType specifies the type of this PCEP entity. It takes one of the following values: - pcc (1) : this entity is a Path Computation Client (PCC) - pce (2) : this entity is a Path Computation Server (PCE). This object can only be set at row creation time and cannot be modified.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER pcc(1), pce(2)  

tmnxPcepEntityAdminState 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.5
The value of tmnxPcepEntityAdminState specifies the desired administrative state of this PCEP entity.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxPcepEntityLocalAddrType 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.6
The value of tmnxPcepEntityLocalAddrType specifies the address type of this PCEP entity's Internet address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxPcepEntityLocalAddr 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.7
The value of tmnxPcepEntityLocalAddr specifies the local Internet address of this PCEP entity.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepEntityKeepAliveInterval 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.8
The value of tmnxPcepEntityKeepAliveInterval specifies keep alive interval that this PCEP entity proposes in the initial OPEN message of each session it is involved in. This is the maximum time between two consecutive messages sent to a peer.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

tmnxPcepEntityDeadTimer 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.9
The value of tmnxPcepEntityDeadTimer specifies the dead timer interval that this PCEP entity proposes in the initial OPEN message of each session it is involved in. This is the time after which a peer should declare a session down if it does not receive any PCEP messages.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

tmnxPcepEntityMaxUnknownMsgs 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.10
The value of tmnxPcepEntityMaxUnknownMsgs specifies the maximum number of unknown messages that any session on this PCEP entity is willing to accept per minute before terminating the session.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

tmnxPcepEntityCapability 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.11
The value of tmnxPcepEntityCapability indicates the capabilities associated with this PCEP entity.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPcepCapabilities  

tmnxPcepEntityIsOverloaded 1.3.6.1.4.1.6527.3.1.2.101.2.3.1.12
The value of tmnxPcepEntityIsOverloaded indicates whether this PCEP entity is overloaded with the processing of existing requests and is unable to handle new requests leading to unacceptable response times.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccEntityTblLastChgd 1.3.6.1.4.1.6527.3.1.2.101.1.2
The value of tmnxPcepPccEntityTblLastChgd indicates the sysUpTime at the time of the last modification of an entry in the tmnxPcepPccEntityTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepPccEntityTable 1.3.6.1.4.1.6527.3.1.2.101.2.1.1
The tmnxPcepPccEntityTable contains information about PCEP Path Computation Client (PCC) entities. Entries, in this table, are created by the system for each row in tmnxPcepEntityTable that have the value of object tmnxPcepEntityType as 'pcc (1)'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepPccEntityEntry

tmnxPcepPccEntityEntry 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1
The value of tmnxPcepPccEntityEntry represents a PCEP PCC entity. Entries in tmnxPcepPccEntityEntry are created when entries in tmnxPcepEntityEntry are created with the value of object tmnxPcepEntityType set to 'pcc (1).
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepPccEntityEntry  

tmnxPcepPccEntityLastChanged 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.1
The value of tmnxPcepPccEntityLastChanged indicates the sysUpTime at the time of the most recent change to this PCC entity row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepPccEntityAddrType 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.2
The value of tmnxPcepPccEntityAddrType indicates the address type of PCEP PCC entity.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccEntityAddr 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.3
The value of tmnxPcepPccEntityAddr indicates the Internet address being used by this PCEP PCC entity. If the value of tmnxPcepEntityLocalAddrType is 'unknown', then the value of this object is assigned by the system, otherwise the value of tmnxPcepEntityLocalAddr is copied to this object.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccEntityReportPathConst 1.3.6.1.4.1.6527.3.1.2.101.2.1.1.1.4
The value of tmnxPcepPccEntityReportPathConst specifies whether this this PCEP PCC entity should report path constraints or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccPeerTableLastChanged 1.3.6.1.4.1.6527.3.1.2.101.1.3
The value of tmnxPcepPccPeerTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tmnxPcepPccPeerTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepPccPeerTable 1.3.6.1.4.1.6527.3.1.2.101.2.4
The tmnxPcepPccPeerTable contains information about peers known by the PCEP entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepPccPeerEntry

tmnxPcepPccPeerEntry 1.3.6.1.4.1.6527.3.1.2.101.2.4.1
The value of tmnxPcepPccPeerEntry represents information about a single peer which spans all PCEP sessions to that peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepPccPeerEntry  

tmnxPcepPccPeerAddrType 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.1
The value of tmnxPcepPccPeerAddrType specifies the address type of the peer's Internet address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccPeerAddr 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.2
The value of tmnxPcepPccPeerAddr specifies the Internet address of the peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxPcepPccPeerRowStatus 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.3
The value of tmnxPcepPccPeerRowStatus controls the creation and deletion of rows for this peer table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxPcepPccPeerLastChanged 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.4
The value of tmnxPcepPccPeerLastChanged indicates the sysUpTime at the time of the most recent change to this peer row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepPccPeerAdminState 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.5
The value of tmnxPcepPccPeerAdminState specifies the desired administrative state of this peer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxPcepPccPeerOperState 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.6
The value of tmnxPcepPccPeerOperState indicated the operational state of this peer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

tmnxPcepPccPeerSpeakerId 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.7
The value of tmnxPcepPccPeerSpeakerId indicates an unique speaker identifier for the peer that does change during the lifetime of the speaker.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

tmnxPcepPccPeerCapability 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.8
The value of tmnxPcepPccPeerCapability indicates the capabilities of this peer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPcepCapabilities  

tmnxPcepPccPeerSyncState 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.9
The value of tmnxPcepPccPeerSyncState indicates the synchronization state of this peer. The valid options are: notInitialized (0) - Indicates the State Synchronization has not yet started or not initialized due to no connection with the peer. inProgress (1) - Indicates the State Synchronization is in progress. done (2) - Indicates the State Synchronization has been completed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notInitialized(0), inProgress(1), done(2)  

tmnxPcepPccPeerIsOverloaded 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.10
The value of tmnxPcepPccPeerIsOverloaded indicates whether the peer is overloaded with the processing of existing requests and is unable to handle new requests leading to unacceptable response times.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccPeerSessEstablishTime 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.11
The value of tmnxPcepPccPeerSessEstablishTime indicates how long this session with the peer has been in the established state.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepPccPeerOperKeepAlive 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.12
The value of tmnxPcepPccPeerOperKeepAlive indicates the operational value of keep alive interval in use by this entity's peer. This is the maximum time between two consecutive messages sent to a peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccPeerOperDeadTimer 1.3.6.1.4.1.6527.3.1.2.101.2.4.1.13
The value of tmnxPcepPccPeerOperDeadTimer indicates the operational value of dead timer interval in use by this entity's peer. This is the time after which a peer should declare a session down if it does not receive any PCEP messages.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPcePeerTable 1.3.6.1.4.1.6527.3.1.2.101.2.5
The tmnxPcepPcePeerTable contains information about peers known by the PCEP entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepPcePeerEntry

tmnxPcepPcePeerEntry 1.3.6.1.4.1.6527.3.1.2.101.2.5.1
The value of tmnxPcepPcePeerEntry represents information about a single peer which spans all PCEP sessions to that peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepPcePeerEntry  

tmnxPcepPcePeerAddrType 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.1
The value of tmnxPcepPcePeerAddrType specifies the address type of the PCE peer's Internet address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPcePeerAddr 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.2
The value of tmnxPcepPcePeerAddr specifies the Internet address of the PCE peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxPcepPcePeerPort 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.3
The value of tmnxPcepPcePeerPort indicates PCE peer's port number.
Status: current Access: read-only
OBJECT-TYPE    
  InetPortNumber  

tmnxPcepPcePeerCapability 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.4
The value of tmnxPcepPcePeerCapability indicates the capabilities of this PCE peer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPcepCapabilities  

tmnxPcepPcePeerSyncState 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.5
The value of tmnxPcepPcePeerSyncState indicates the synchronization state of this peer. The valid options are: notInitialized (0) - Indicates the State Synchronization has not yet started or not initalized due to no connection with the peer. inProgress (1) - Indicates the State Synchronization is in progress. done (2) - Indicates the State Synchronization has been completed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notInitialized(0), inProgress(1), done(2)  

tmnxPcepPcePeerSpeakerId 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.6
The value of tmnxPcepPcePeerSpeakerId indicates an unique speaker identifier for the peer that does change during the lifetime of the speaker.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

tmnxPcepPcePeerSessEstablishTime 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.7
The value of tmnxPcepPcePeerSessEstablishTime indicates how long this session with the peer has been in the established state.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxPcepPcePeerOperKeepAlive 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.8
The value of tmnxPcepPcePeerOperKeepAlive indicates the operational value of keep alive interval in use by this entity's peer. This is the maximum time between two consecutive messages sent to a peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPcePeerOperDeadTimer 1.3.6.1.4.1.6527.3.1.2.101.2.5.1.9
The value of tmnxPcepPcePeerOperDeadTimer indicates the operational value of dead timer interval in use by this entity's peer. This is the time after which a peer should declare a session down if it does not receive any PCEP messages.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgInfoTable 1.3.6.1.4.1.6527.3.1.2.101.3.1.1
The tmnxPcepPccReqMsgInfoTable contains Path Computation Request (PCReq) messages information sent by PCC to request a path computation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepPccReqMsgInfoEntry

tmnxPcepPccReqMsgInfoEntry 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1
The value of tmnxPcepPccReqMsgInfoEntry represents information related to Path Computation Request (PCReq) messages sent by PCC requesting for path computation.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepPccReqMsgInfoEntry  

tmnxPcepPccReqMsgRequestId 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.1
The value of tmnxPcepPccReqMsgRequestId specifies the unique path computation request identifier represented in PCReq message.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

tmnxPcepPccReqMsgLspType 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.2
The value of tmnxPcepPccReqMsgLspType indicates the type of Labeled Switch Path (LSP) connection.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPcepLspType  

tmnxPcepPccReqMsgTunnelId 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.3
The value of tmnxPcepPccReqMsgTunnelId indicates the unique tunnel identifier that remains constant over the life time of a tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgLspId 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.4
The value of tmnxPcepPccReqMsgLspId indicates the unique identifier for LSP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgExtTunnelIdType 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.5
The value tmnxPcepPccReqMsgExtTunnelIdType indicates the address type for tmnxPcepPccReqMsgExtTunnelId.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccReqMsgExtTunnelId 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.6
The value of tmnxPcepPccReqMsgExtTunnelId indicates the extended tunnel identifier.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccReqMsgLspName 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.7
The value of tmnxPcepPccReqMsgLspName indicates the LSP path name that is unique in the PCC and remains constant throughout a path's life time.
Status: current Access: read-only
OBJECT-TYPE    
  TLNamedItemOrEmpty  

tmnxPcepPccReqMsgSrcAddrType 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.8
The value tmnxPcepPccReqMsgSrcAddrType indicates the address type for tmnxPcepPccReqMsgSrcAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccReqMsgSrcAddr 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.9
The value of tmnxPcepPccReqMsgSrcAddr indicates the source address of the path for which path computation is requested. It is the END-POINTS object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccReqMsgDstAddrType 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.10
The value tmnxPcepPccReqMsgDstAddrType indicates the address type for tmnxPcepPccReqMsgDstAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccReqMsgDstAddr 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.11
The value of tmnxPcepPccReqMsgDstAddr indicates the destination address of the path for which path computation is requested. It is the END-POINTS object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccReqMsgState 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.12
The value of tmnxPcepPccReqMsgState indicates the state of PCReq message: unknown (0) - The state of PCReq message is unknown. requestParameter(1) - Request Parameter (RP) object is included in the PCReq message. sentForCompute (2) - PCReq message has been sent for path computation. errorReceived (3) - Path Computation Error (PCErr) message is received by the PCC. notifyReceived (4) - Path Computation Notification (PCNtf) message is received by the PCC. cancel (5) - PCReq message has been cancelled. computeReceived (6) - Path computation is received by the PCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), requestParameter(1), sentForCompute(2), errorReceived(3), notifyReceived(4), cancel(5), computeReceived(6)  

tmnxPcepPccReqMsgSvecId 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.13
The value of tmnxPcepPccReqMsgSvecId indicates the Synchronization VECtor (SVEC) identifier for Synchronized Dependent Path Computations.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxPcepPccReqMsgIgpMetric 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.14
The value of tmnxPcepPccReqMsgIgpMetric indicates Interior Gateway Protocol (IGP) metric that must be optimized by the path computation algorithm for providing the cost of computed path. It is the METRIC object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgTeMetric 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.15
The value of tmnxPcepPccReqMsgTeMetric indicates Traffic Engineering (TE) metric that must be optimized by the path computation algorithm for providing the cost of computed path. It is the METRIC object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgHopCount 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.16
The value of tmnxPcepPccReqMsgHopCount indicates the number of hops that transversed. It is the METRIC object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgMetricBound 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.17
The value of tmnxPcepPccReqMsgMetricBound indicates whether the metric-value specifies a bound (a maximum) for the path metric that must not be exceeded for the PCC to consider the computed path as acceptable. It is the METRIC object used in PCReq message. When the value of the bit 'igpMetric (0)' is set to one, it indicates that the metric-value specified by tmnxPcepPccReqMsgIgpMetric is a bound value. When the value of the bit 'teMetric (1)' is set to one, it indicates that the metric-value specified by tmnxPcepPccReqMsgTeMetric is a bound value. When the value of the bit 'hopCount (2)' is set to one, it indicates that the metric-value specified by tmnxPcepPccReqMsgHopCount is a bound value.
Status: current Access: read-only
OBJECT-TYPE    
  BITS igpMetric(0), teMetric(1), hopCount(2)  

tmnxPcepPccReqMsgMetricCompute 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.18
The value of tmnxPcepPccReqMsgMetricCompute indicates whether PCE must provide the computed path metric value in Path Computation Response (PCRep) message for the corresponding metric. It is the METRIC object used in PCReq message. When the value of the bit 'igpMetric (0)' is set to one, it indicates that PCE must provide the computed path metric value for IGP metric in PCRep message. When the value of the bit 'teMetric (1)' is set to one, it indicates that PCE must provide the computed path metric value for TE Metric in PCRep message. When the value of the bit 'hopCount (2)' is set to one, it indicates that PCE must provide the computed path metric value for Hop Count in PCRep message.
Status: current Access: read-only
OBJECT-TYPE    
  BITS igpMetric(0), teMetric(1), hopCount(2)  

tmnxPcepPccReqMsgLclProtDesired 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.19
The value of tmnxPcepPccReqMsgLclProtDesired indicates whether local protection is desired or not. It is the LSPA (LSP Attribute) object used in PCReq message. When the value of this object is set to 'true (1)', it indicates that the computed path must include links protected with Fast Reroute as defined in the maximum number of hops to be transversed that must not be exceeded to consider computed path as acceptable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccReqMsgSetupPriority 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.20
The value of tmnxPcepPccReqMsgSetupPriority indicates the priority of the TE LSP with respect to taking resources. The value of 0 represents highest priority. The setup priority indicates whether this session can preempt another session. It is the LSPA object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

tmnxPcepPccReqMsgHoldingPriority 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.21
The value of tmnxPcepPccReqMsgHoldingPriority indicates the priority of of the TE LSP with respect to holding resources. The value of 0 represents highest priority. The holding priority indicates whether this session can be preempted by another session. It is the LSPA object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

tmnxPcepPccReqMsgExcludeAny 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.22
The value of tmnxPcepPccReqMsgExcludeAny indicates a set of attribute filters associated with a tunnel any of which renders a link unacceptable. It is the LSPA object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgIncludeAny 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.23
The value of tmnxPcepPccReqMsgIncludeAny indicates a set of attribute filters associated with a tunnel any of which renders a link acceptable. It is the LSPA object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgIncludeAll 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.24
The value of tmnxPcepPccReqMsgIncludeAll indicates a set of attribute filters associated with a tunnel all of which much be present for a link to be acceptable. It is the LSPA object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgPriority 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.25
The value of tmnxPcepPccReqMsgPriority indicates the priority of the PCReq message. It is the RP object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgReoptimization 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.26
The value of tmnxPcepPccReqMsgReoptimization indicates whether the PCReq message relates to the reoptimization of an existing TE LSP. It is the RP object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccReqMsgBidirectional 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.27
The value of tmnxPcepPccReqMsgBidirectional indicates whether the PCReq message relates to a bi-directional TE LSP that has the same traffic engineering requirements including fate sharing, protection and restoration, LSRs, TE links, and resource requirements (e.g., latency and jitter) in each direction. It is the RP object used in PCReq message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccReqMsgStrictLoose 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.28
The value of tmnxPcepPccReqMsgStrictLoose indicates whether the path is strict or loose. It is the RP object used in PCReq message. When the value of this object is set to 'true (1)', it indicates that a loose path is acceptable. When the value of this object is set to 'false (2)', it indicates that a path exclusively made of strict hops is required.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccReqMsgLspBandwidth 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.29
The value of tmnxPcepPccReqMsgLspBandwidth indicates the bandwidth that is being requested by the LSP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqMsgMaxSrLabels 1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.30
The value of tmnxPcepPccReqMsgMaxSrLabels indicates maximum segment routing label stack size for this LSP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..10  

tmnxPcepPccReqPathProfInfoTable 1.3.6.1.4.1.6527.3.1.2.101.3.1.2
The tmnxPcepPccReqPathProfInfoTable contains Path Computation Request (PCReq) messages containing path-profile information sent by PCC to request a path computation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepPccReqPathProfInfoEntry

tmnxPcepPccReqPathProfInfoEntry 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1
The value of tmnxPcepPccReqPathProfInfoEntry represents path-profile information related to Path Computation Request (PCReq) messages sent by PCC requesting for path computation. A valid entry for this table is returned only if the table contains atleast one non-zero value.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepPccReqPathProfInfoEntry  

tmnxPcepPccReqPathProf1 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.1
The value of tmnxPcepPccReqPathProf1 indicates the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqExtendedPathProf1 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.2
The value of tmnxPcepPccReqExtendedPathProf1 indicates the extended identifier associated with the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqPathProf2 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.3
The value of tmnxPcepPccReqPathProf2 indicates the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqExtendedPathProf2 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.4
The value of tmnxPcepPccReqExtendedPathProf2 indicates the extended identifier associated with the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqPathProf3 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.5
The value of tmnxPcepPccReqPathProf3 indicates the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqExtendedPathProf3 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.6
The value of tmnxPcepPccReqExtendedPathProf3 indicates the extended identifier associated with the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqPathProf4 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.7
The value of tmnxPcepPccReqPathProf4 indicates the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqExtendedPathProf4 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.8
The value of tmnxPcepPccReqExtendedPathProf4 indicates the extended identifier associated with the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqPathProf5 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.9
The value of tmnxPcepPccReqPathProf5 indicates the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccReqExtendedPathProf5 1.3.6.1.4.1.6527.3.1.2.101.3.1.2.1.10
The value of tmnxPcepPccReqExtendedPathProf5 indicates the extended identifier associated with the path profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccLspUpdateInfoTable 1.3.6.1.4.1.6527.3.1.2.101.3.1.3
The tmnxPcepPccLspUpdateInfoTable contains Labeled Switch Path (LSP) update information sent by a PCE to a PCC to update attributes of a LSP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepPccLspUpdateInfoEntry

tmnxPcepPccLspUpdateInfoEntry 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1
The value of tmnxPcepPccLspUpdateInfoEntry represents LSP update information sent by a PCE to a PCC to update attributes of a LSP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepPccLspUpdateInfoEntry  

tmnxPcepPccLspUpdPLspId 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.1
The value of tmnxPcepPccLspUpdPLspId specifies an unique PCEP-specific identifier for the LSP created by a PCC that remains constant for the life time of a PCEP session.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

tmnxPcepPccLspUpdLspId 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.2
The value of tmnxPcepPccLspUpdLspId indicates the unique identifier for LSP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccLspUpdLspType 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.3
The value of tmnxPcepPccLspUpdLspType indicates the type of LSP connection.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPcepLspType  

tmnxPcepPccLspUpdTunnelId 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.4
The value of tmnxPcepPccLspUpdTunnelId indicates the unique tunnel identifier that remains constant over the life time of a tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxPcepPccLspUpdExtTunnelIdType 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.5
The value tmnxPcepPccLspUpdExtTunnelIdType indicates the address type for tmnxPcepPccLspUpdExtTunnelId.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccLspUpdExtTunnelId 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.6
The value of tmnxPcepPccLspUpdExtTunnelId indicates the extended tunnel identifier.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccLspUpdLspName 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.7
The value of tmnxPcepPccLspUpdLspName indicates the LSP path name that is unique in the PCC and remains constant throughout a path's life time.
Status: current Access: read-only
OBJECT-TYPE    
  TLNamedItemOrEmpty  

tmnxPcepPccLspUpdSenderType 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.8
The value tmnxPcepPccLspUpdSenderType indicates the address type for tmnxPcepPccLspUpdSenderAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccLspUpdSenderAddr 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.9
The value of tmnxPcepPccLspUpdSenderAddr indicates the sender node's address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccLspUpdSourceType 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.10
The value tmnxPcepPccLspUpdSourceType indicates the address type for tmnxPcepPccLspUpdSourceAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccLspUpdSourceAddr 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.11
The value of tmnxPcepPccLspUpdSourceAddr indicates the sender address of the LSP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccLspUpdDestinationType 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.12
The value tmnxPcepPccLspUpdDestinationType indicates the address type for tmnxPcepPccLspUpdDestinationAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccLspUpdDestinationAddr 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.13
The value of tmnxPcepPccLspUpdDestinationAddr indicates the destination address of the LSP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccLspUpdLspDelegated 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.14
The value of tmnxPcepPccLspUpdLspDelegated indicates whether the PCC is delegating the LSP to the PCE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxPcepPccLspUpdDelgatdPeerType 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.15
The value tmnxPcepPccLspUpdDelgatdPeerType indicates the address type for tmnxPcepPccLspUpdDelgatdPeerAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPccLspUpdDelgatdPeerAddr 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.16
The value of tmnxPcepPccLspUpdDelgatdPeerAddr indicates the peer address to which the PCC has delegated the LSP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxPcepPccLspUpdOperState 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.17
The value of tmnxPcepPccLspUpdOperState indicates the operational status of the LSP: down (0) - LSP is not active. up (1) - LSP has been signalled. active (2) - LSP is up and carrying traffic. goingDown (3) - LSP is being torn down, resources are being released. goingUp (4) - LSP is being signalled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1), active(2), goingDown(3), goingUp(4)  

tmnxPcepPccLspUpdLspError 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.18
The value of tmnxPcepPccLspUpdLspError indicates the error information containing the reason for LSP update failure: notApplicable (0) - Not Applicable. unknownReason (1) - Unknown reason. limitRchdForPceLsp (2) - Limit reached for PCE-controlled LSPs. manyPendingLspUpdate (3) - Too many pending LSP update requests. unacceptableParameters(4) - Unacceptable parameters. internalError (5) - Internal error. lspAdminDown (6) - LSP administratively brought down. lspPreempted (7) - LSP preempted. rsvpSignalingError (8) - RSVP signaling error.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), unknownReason(1), limitRchdForPceLsp(2), manyPendingLspUpdate(3), unacceptableParameters(4), internalError(5), lspAdminDown(6), lspPreempted(7), rsvpSignalingError(8)  

tmnxPcepPccLspUpdState 1.3.6.1.4.1.6527.3.1.2.101.3.1.3.1.19
The value of tmnxPcepPccLspUpdState indicates the state of LSP: notApplicable (0) - Make-Before-Break (MBB) is not-applicable or is not in progress. mbbInProgress (1) - MBB procedure is in progress. mbbFail (2) - MBB procedure failed. mbbSuccess (3) - MBB procedure succeeded. updateDelegation (4) - deledation update is being processed. lspDown (5) - LSP down update is being processed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), mbbInProgress(1), mbbFail(2), mbbSuccess(3), updateDelegation(4), lspDown(5)  

tmnxPcepPeerStatsTable 1.3.6.1.4.1.6527.3.1.2.101.3.3.1
The tmnxPcepPeerStatsTable contains statistics information about peers known by the PCEP entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxPcepPeerStatsEntry

tmnxPcepPeerStatsEntry 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1
The value of tmnxPcepPeerStatsEntry represents statistics information about a single peer which spans all PCEP sessions to that peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPcepPeerStatsEntry  

tmnxPcepPeerAddrType 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.1
The value of tmnxPcepPeerAddrType specifies the address type of the peer's Internet address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxPcepPeerAddr 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.2
The value of tmnxPcepPeerAddr specifies the Internet address of the peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxPcepPeerNumPCRptSent 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.3
The value of tmnxPcepPeerNumPCRptSent indicates the number of PCRpt messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxPcepPeerNumPCRptRcvd 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.4
The value of tmnxPcepPeerNumPCRptRcvd indicates the number of PCRpt messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxPcepPeerNumPCUpdSent 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.5
The value of tmnxPcepPeerNumPCUpdSent indicates the number of PCUpd messages sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxPcepPeerNumPCUpdRcvd 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.6
The value of tmnxPcepPeerNumPCUpdRcvd indicates the number of PCUpd messages received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxPcepPeerNumRptSent 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.7
The value of tmnxPcepPeerNumRptSent indicates the number of report messages sent to this peer. This might be greater than tmnxPcepPeerNumPCRptSent because multiple requests can be batched into a single PCRpt message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxPcepPeerNumRptRcvd 1.3.6.1.4.1.6527.3.1.2.101.3.3.1.1.8
The value of tmnxPcepPeerNumRptRcvd indicates the number of report messages received from this peer. This might be greater than tmnxPcepPeerNumPCRptRcvd because multiple requests can be batched into a single PCRpt message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxPcepCompliance 1.3.6.1.4.1.6527.3.1.1.101.1.1
The compliance statement for management of PCEP features on Nokia SROS series systems release.
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxPcepTableChngdGroup 1.3.6.1.4.1.6527.3.1.1.101.2.1
The group of objects supporting PCEP table last changed objects on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepConfigGroup 1.3.6.1.4.1.6527.3.1.1.101.2.2
The group of objects supporting PCEP configuration on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepPccConfigGroup 1.3.6.1.4.1.6527.3.1.1.101.2.3
The group of objects supporting PCEP PCC configuration on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepPccPeerConfigGroup 1.3.6.1.4.1.6527.3.1.1.101.2.5
The group of objects supporting PCEP Peer configuration on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepPcePeerGroup 1.3.6.1.4.1.6527.3.1.1.101.2.6
The group of objects supporting PCEP PCE Peer configuration on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepPccReqMsgInfoGroup 1.3.6.1.4.1.6527.3.1.1.101.2.7
The group of objects supporting PCEP PCC request message (PCReq) information on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepPccReqPathProfInfoGroup 1.3.6.1.4.1.6527.3.1.1.101.2.8
The group of objects supporting PCEP PCC request message (PCReq) information related to path-profile on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepPccLspUpdInfoGroup 1.3.6.1.4.1.6527.3.1.1.101.2.9
The group of objects supporting PCEP PCC Label Switched Path (LSP) update information on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxPcepPeerStatsGroup 1.3.6.1.4.1.6527.3.1.1.101.2.10
The group of objects supporting PCEP Peer Statistics information on Nokia SROS series systems release.
Status: current Access: read-only
OBJECT-GROUP