TIMETRA-MSDP-NG-MIB

File: TIMETRA-MSDP-NG-MIB.mib (110409 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-GLOBAL-MIB TIMETRA-TC-MIB INET-ADDRESS-MIB
TIMETRA-VRTR-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Gauge32 Counter32
Integer32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP RowStatus TruthValue
TimeInterval TimeStamp timetraSRMIBModules
tmnxSRObjs tmnxSRNotifyPrefix tmnxSRConfs
TPolicyStatementNameOrEmpty TmnxAdminState TNamedItem
TNamedItemOrEmpty InetAddressType InetAddress
InetAddressPrefixLength vRtrID

Defined Types

TmnxMsdpNgGeneralEntry  
SEQUENCE    
  tmnxMsdpNgMaxActiveSources Integer32
  tmnxMsdpNgMsgRcvRate Unsigned32
  tmnxMsdpNgMsgRcvRateTime Unsigned32
  tmnxMsdpNgMsgRcvRateThd Gauge32
  tmnxMsdpNgDataEncapsulation TruthValue
  tmnxMsdpNgAdminState TmnxAdminState
  tmnxMsdpNgExportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgExportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgExportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgExportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgExportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgImportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgImportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgImportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgImportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgImportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgLocalAddressType InetAddressType
  tmnxMsdpNgLocalAddress InetAddress
  tmnxMsdpNgStatusPeerCount Gauge32
  tmnxMsdpNgStatusPeersEstablished Gauge32
  tmnxMsdpNgStatusSACount Gauge32
  tmnxMsdpNgStatusLastTimeUp TimeStamp
  tmnxMsdpNgStatusActSrcLimExceed Counter32
  tmnxMsdpNgRpfLookupSequence INTEGER
  tmnxMsdpNgSACacheLifetime Unsigned32
  tmnxMsdpNgSARejectExportPolicy Counter32
  tmnxMsdpNgSARejectImportPolicy Counter32

TmnxMsdpNgPeerEntry  
SEQUENCE    
  tmnxMsdpNgPeerAddressType InetAddressType
  tmnxMsdpNgPeerAddress InetAddress
  tmnxMsdpNgPeerRowStatus RowStatus
  tmnxMsdpNgPeerMaxActiveSources Integer32
  tmnxMsdpNgPeerMsgRcvRate Unsigned32
  tmnxMsdpNgPeerMsgRcvRateTime Unsigned32
  tmnxMsdpNgPeerMsgRcvRateThd Gauge32
  tmnxMsdpNgPeerAuthKey OCTET STRING
  tmnxMsdpNgPeerAuthKeyEncrypted TruthValue
  tmnxMsdpNgPeerDefaultPeer TruthValue
  tmnxMsdpNgPeerAdminState TmnxAdminState
  tmnxMsdpNgPeerExportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerExportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerExportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerExportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerExportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerImportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerImportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerImportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerImportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerImportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerLocalAddressType InetAddressType
  tmnxMsdpNgPeerLocalAddress InetAddress
  tmnxMsdpNgPeerState INTEGER
  tmnxMsdpNgPeerLastUpOrDown TimeStamp
  tmnxMsdpNgPeerConRetry Counter32
  tmnxMsdpNgPeerStateTimer Unsigned32
  tmnxMsdpNgPeerTimeout Unsigned32
  tmnxMsdpNgPeerSAAccepted Gauge32
  tmnxMsdpNgPeerSARx Gauge32
  tmnxMsdpNgPeerLastASLimit TimeStamp
  tmnxMsdpNgPeerOperLclAddrType InetAddressType
  tmnxMsdpNgPeerOperLclAddr InetAddress

TmnxMsdpNgPeerGroupEntry  
SEQUENCE    
  tmnxMsdpNgPeerGroupName TNamedItem
  tmnxMsdpNgPeerGroupRowStatus RowStatus
  tmnxMsdpNgPeerGroupMsgRcvRate Unsigned32
  tmnxMsdpNgPeerGrpMsgRcvRateTime Unsigned32
  tmnxMsdpNgPeerGroupMsgRcvRateThd Gauge32
  tmnxMsdpNgPeerGroupAdminState TmnxAdminState
  tmnxMsdpNgPeerGroupExportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupExportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupExportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupExportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupExportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupImportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupImportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupImportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupImportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupImportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGroupLocalAddrType InetAddressType
  tmnxMsdpNgPeerGroupLocalAddress InetAddress
  tmnxMsdpNgPeerGroupMode INTEGER
  tmnxMsdpNgPeerGroupMaxActSources Integer32
  tmnxMsdpNgPeerGroupActMsgsExMax Counter32
  tmnxMsdpNgPeerGrpSARejExpPolicy Counter32
  tmnxMsdpNgPeerGrpSARejImpPolicy Counter32

TmnxMsdpNgPeerGrpPeerEntry  
SEQUENCE    
  tmnxMsdpNgPeerGrpPeerAddressType InetAddressType
  tmnxMsdpNgPeerGrpPeerAddress InetAddress
  tmnxMsdpNgPeerGrpPeerRowStatus RowStatus
  tmnxMsdpNgPeerGrpPeerMaxActSrcs Integer32
  tmnxMsdpNgPeerGrpPeerMsgRcvRt Unsigned32
  tmnxMsdpNgPeerGrpPeerMsgRxRtTime Unsigned32
  tmnxMsdpNgPeerGrpPeerMsgRcvRtThd Gauge32
  tmnxMsdpNgPeerGrpPeerAuthKey OCTET STRING
  tmnxMsdpNgPeerGrpPeerAKeyEncrypt TruthValue
  tmnxMsdpNgPeerGrpPeerDefaultPeer TruthValue
  tmnxMsdpNgPeerGrpPeerAdminState TmnxAdminState
  tmnxMsdpNgPeerGrpPeerExportPlcy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerExportPlcy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerExportPlcy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerExportPlcy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerExportPlcy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerImportPlcy1 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerImportPlcy2 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerImportPlcy3 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerImportPlcy4 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerImportPlcy5 TPolicyStatementNameOrEmpty
  tmnxMsdpNgPeerGrpPeerLocAddrType InetAddressType
  tmnxMsdpNgPeerGrpPeerLocalAddr InetAddress
  tmnxMsdpNgPeerGrpPeerState INTEGER
  tmnxMsdpNgPeerGrpPeerLstUpOrDwn TimeStamp
  tmnxMsdpNgPeerGrpPeerConRetry Counter32
  tmnxMsdpNgPeerGrpPeerStateTimer Unsigned32
  tmnxMsdpNgPeerGrpPeerTimeout Unsigned32
  tmnxMsdpNgPeerGrpPeerSAAccepted Gauge32
  tmnxMsdpNgPeerGrpPeerSARx Gauge32
  tmnxMsdpNgPeerGrpPeerLastASLimit TimeStamp
  tmnxMsdpNgPeerGrpPeerOpAddrType InetAddressType
  tmnxMsdpNgPeerGrpPeerOpAddr InetAddress

TmnxMsdpNgSourceEntry  
SEQUENCE    
  tmnxMsdpNgSourcePrefixType InetAddressType
  tmnxMsdpNgSourcePrefix InetAddress
  tmnxMsdpNgSourceMask InetAddressPrefixLength
  tmnxMsdpNgSourceRowStatus RowStatus
  tmnxMsdpNgSourceMaxActiveSources Integer32
  tmnxMsdpNgSourceDiscMethod INTEGER
  tmnxMsdpNgSourceSrcActMsgsExMax Counter32
  tmnxMsdpNgSourceLastExEventTime TimeStamp

TmnxMsdpNgSAEntry  
SEQUENCE    
  tmnxMsdpNgSAGroupAddrType InetAddressType
  tmnxMsdpNgSAGroupAddr InetAddress
  tmnxMsdpNgSASourceAddrType InetAddressType
  tmnxMsdpNgSASourceAddr InetAddress
  tmnxMsdpNgSAOriginRPType InetAddressType
  tmnxMsdpNgSAOriginRP InetAddress
  tmnxMsdpNgSAPrLearnFrType InetAddressType
  tmnxMsdpNgSAPeerLearntFrom InetAddress
  tmnxMsdpNgSARPFPeerType InetAddressType
  tmnxMsdpNgSARPFPeer InetAddress
  tmnxMsdpNgSAUpTime TimeInterval
  tmnxMsdpNgSAExpiryTime TimeInterval

TmnxMsdpNgPeerStatsEntry  
SEQUENCE    
  tmnxMsdpNgPeerStatsActSrcLimExcd Counter32
  tmnxMsdpNgPeerStatsLastStChange TimeInterval
  tmnxMsdpNgPeerStatsLastMsgPeer TimeInterval
  tmnxMsdpNgPeerStatsRPFFailures Counter32
  tmnxMsdpNgPeerStatsRemoteCloses Counter32
  tmnxMsdpNgPeerStatsPeerTimeouts Counter32
  tmnxMsdpNgPeerStatsSAMsgsSent Counter32
  tmnxMsdpNgPeerStatsSAMsgsRx Counter32
  tmnxMsdpNgPeerStatsSAReqMsgsSent Counter32
  tmnxMsdpNgPeerStatsSAReqMsgsRx Counter32
  tmnxMsdpNgPeerStatsSAResMsgsSent Counter32
  tmnxMsdpNgPeerStatsSAResMsgsRx Counter32
  tmnxMsdpNgPeerStatsKAMsgsSent Counter32
  tmnxMsdpNgPeerStatsKAMsgsRx Counter32
  tmnxMsdpNgPeerStatsUnknMsgsRx Counter32
  tmnxMsdpNgPeerStatsErrMsgsRx Counter32
  tmnxMsdpNgPeerStatsSALearnt Gauge32
  tmnxMsdpNgPeerStatsSARejExpPlcy Counter32
  tmnxMsdpNgPeerStatsSARejImpPlcy Counter32
  tmnxMsdpNgPeerStatsResvMsgsRx Counter32

TmnxMsdpNgSrcActRejEntry  
SEQUENCE    
  tmnxMsdpNgSARejPeerGroupName TNamedItemOrEmpty
  tmnxMsdpNgSARejGroupAddrType InetAddressType
  tmnxMsdpNgSARejGroupAddr InetAddress
  tmnxMsdpNgSARejSourceAddrType InetAddressType
  tmnxMsdpNgSARejSourceAddr InetAddress
  tmnxMsdpNgSARejOriginRPType InetAddressType
  tmnxMsdpNgSARejOriginRP InetAddress
  tmnxMsdpNgSARejPeerAddrType InetAddressType
  tmnxMsdpNgSARejPeerAddr InetAddress
  tmnxMsdpNgSARejFailureReason INTEGER

Defined Values

timetraMsdpNgMIBModule 1.3.6.1.4.1.6527.1.1.3.104
This is the SNMP MIB module to manage and provision MSDP protocol on Nokia SROS equipment. The Multicast Source Discovery Protocol (MSDP) is used to connect multicast routing domains. It typically runs on the same router as the Protocol Independent Multicast (PIM) sparse-mode rendezvous point (RP). Each MSDP router establishes adjacencies with internal and external MSDP peers similar to the Border Gateway Protocol (BGP). These peer routers inform each other about active sources within the domain. When they detect active sources, the routers can send PIM sparse-mode explicit join messages to the active source. Copyright 2014-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxMsdpNgObjects 1.3.6.1.4.1.6527.3.1.2.104
OBJECT IDENTIFIER    

tmnxMsdpNgGlobals 1.3.6.1.4.1.6527.3.1.2.104.1
OBJECT IDENTIFIER    

tmnxMsdpNgConformance 1.3.6.1.4.1.6527.3.1.1.104
OBJECT IDENTIFIER    

tmnxMsdpNgCompliances 1.3.6.1.4.1.6527.3.1.1.104.1
OBJECT IDENTIFIER    

tmnxMsdpNgGroups 1.3.6.1.4.1.6527.3.1.1.104.2
OBJECT IDENTIFIER    

tmnxMsdpNgNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.104
OBJECT IDENTIFIER    

tmnxMsdpNgNotifications 1.3.6.1.4.1.6527.3.1.3.104.0
OBJECT IDENTIFIER    

tmnxMsdpNgGeneralTableLstChanged 1.3.6.1.4.1.6527.3.1.2.104.1.1
The value of tmnxMsdpNgGeneralTableLstChanged indicates the sysUpTime at the time of the last modification of an entry in the tmnxMsdpNgGeneralTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpNgGeneralTable 1.3.6.1.4.1.6527.3.1.2.104.2
The tmnxMsdpNgGeneralTable contains objects for general control and management of the MSDP protocol instance within a virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgGeneralEntry

tmnxMsdpNgGeneralEntry 1.3.6.1.4.1.6527.3.1.2.104.2.1
Each row entry represents an instance of the MSDP protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgGeneralEntry  

tmnxMsdpNgMaxActiveSources 1.3.6.1.4.1.6527.3.1.2.104.2.1.1
The value of tmnxMsdpNgMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of '0' means that no source active messages will be accepted.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpNgMsgRcvRate 1.3.6.1.4.1.6527.3.1.2.104.2.1.2
The value of tmnxMsdpNgMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value '0'. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpNgMsgRcvRateTime 1.3.6.1.4.1.6527.3.1.2.104.2.1.3
The value of tmnxMsdpNgMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpNgMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value '0'. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpNgMsgRcvRateThd 1.3.6.1.4.1.6527.3.1.2.104.2.1.4
The value of tmnxMsdpNgMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value '0'. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpNgDataEncapsulation 1.3.6.1.4.1.6527.3.1.2.104.2.1.5
The value of tmnxMsdpNgDataEncapsulation is used to configure a rendezvous point (RP) using MSDP to encapsulate multicast data received in MSDP register messages inside forwarded MSDP source-active messages. By default data encapsulation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxMsdpNgAdminState 1.3.6.1.4.1.6527.3.1.2.104.2.1.6
The value of tmnxMsdpNgAdminState specifies the desired administrative state for MSDP. When MSDP is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer or peer group is also disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpNgExportPolicy1 1.3.6.1.4.1.6527.3.1.2.104.2.1.7
The value of tmnxMsdpNgExportPolicy1 specifies the first export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgExportPolicy2 1.3.6.1.4.1.6527.3.1.2.104.2.1.8
The value of tmnxMsdpNgExportPolicy2 specifies the second export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgExportPolicy3 1.3.6.1.4.1.6527.3.1.2.104.2.1.9
The value of tmnxMsdpNgExportPolicy3 specifies the third export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgExportPolicy4 1.3.6.1.4.1.6527.3.1.2.104.2.1.10
The value of tmnxMsdpNgExportPolicy4 specifies the fourth export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgExportPolicy5 1.3.6.1.4.1.6527.3.1.2.104.2.1.11
The value of tmnxMsdpNgExportPolicy5 specifies the fifth export policy to export Source Active (SA) state from the SA list into MSDP. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgImportPolicy1 1.3.6.1.4.1.6527.3.1.2.104.2.1.12
The value of tmnxMsdpNgImportPolicy1 specifies the first import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgImportPolicy2 1.3.6.1.4.1.6527.3.1.2.104.2.1.13
The value of tmnxMsdpNgImportPolicy2 specifies the second import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgImportPolicy3 1.3.6.1.4.1.6527.3.1.2.104.2.1.14
The value of tmnxMsdpNgImportPolicy3 specifies the third import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgImportPolicy4 1.3.6.1.4.1.6527.3.1.2.104.2.1.15
The value of tmnxMsdpNgImportPolicy4 specifies the fourth import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgImportPolicy5 1.3.6.1.4.1.6527.3.1.2.104.2.1.16
The value of tmnxMsdpNgImportPolicy5 specifies the fifth import policy to import Source Active (SA) state from the SA list into MSDP. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgLocalAddressType 1.3.6.1.4.1.6527.3.1.2.104.2.1.17
The value of tmnxMsdpNgLocalAddressType specifies the type of tmnxMsdpNgLocalAddress.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgLocalAddress 1.3.6.1.4.1.6527.3.1.2.104.2.1.18
The value of tmnxMsdpNgLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgStatusPeerCount 1.3.6.1.4.1.6527.3.1.2.104.2.1.19
The value of tmnxMsdpNgStatusPeerCount indicates the number of configured peers.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgStatusPeersEstablished 1.3.6.1.4.1.6527.3.1.2.104.2.1.20
The value of tmnxMsdpNgStatusPeersEstablished indicates the number of peers in established state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgStatusSACount 1.3.6.1.4.1.6527.3.1.2.104.2.1.21
The value of tmnxMsdpNgStatusSACount indicates the number of source active configured in cache.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgStatusLastTimeUp 1.3.6.1.4.1.6527.3.1.2.104.2.1.22
The value of tmnxMsdpNgStatusLastTimeUp indicates the last time the protocol was enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpNgStatusActSrcLimExceed 1.3.6.1.4.1.6527.3.1.2.104.2.1.23
The value of tmnxMsdpNgStatusActSrcLimExceed indicates the number of times the global active source limit has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgRpfLookupSequence 1.3.6.1.4.1.6527.3.1.2.104.2.1.24
tmnxMsdpNgRpfLookupSequence is used to configure the sequence of route tables that MSDP uses for finding a Reverse Path Forwarding(RPF) interface for a particular multicast route. 'mucastRouteTable' is the unicast route table to be used only by multicast protocols(MSDP) which will contain routes submitted by multi-protocol BGP, ISIS and OSPF. 'ucastRouteTable' is the regular unicast route table which will contain routes submitted by all the unicast routing protocols. By default, only the 'ucastRouteTable' is looked up by MSDP for calculating RPF interface towards the source/rendezvous point. However the operator can specify the following: a) Use unicast route table only b) Use multicast unicast route table only or c) Use both the route tables. In case of (c), MSDP will always lookup first in the 'mucastRouteTable' and if there is a route, it will use it. If MSDP does not find a route in the first lookup, it will try to find it in the 'ucastRouteTable'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mucastRouteTable(0), ucastRouteTable(1), both(2)  

tmnxMsdpNgSACacheLifetime 1.3.6.1.4.1.6527.3.1.2.104.2.1.25
The value of tmnxMsdpNgSACacheLifetime specifies lifetime given to SA cache entries in seconds when created or refreshed. This object does not measure time per se; instead, it is the delta from the time at which an SA message is received at which it should be expired if not refreshed. (i.e., it is the value of tmnxMsdpNgSAExpiryTime immediately after receiving an SA message applying to that row.)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 90..600  

tmnxMsdpNgSARejectExportPolicy 1.3.6.1.4.1.6527.3.1.2.104.2.1.26
The value of tmnxMsdpNgSARejectExportPolicy indicates number of SA messages that were not sent due to export policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgSARejectImportPolicy 1.3.6.1.4.1.6527.3.1.2.104.2.1.27
The value of tmnxMsdpNgSARejectImportPolicy indicates number of SA messages that were rejected due to import policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerTable 1.3.6.1.4.1.6527.3.1.2.104.3
The tmnxMsdpNgPeerTable table provides information on the properties of a MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgPeerEntry

tmnxMsdpNgPeerEntry 1.3.6.1.4.1.6527.3.1.2.104.3.1
tmnxMsdpNgPeerEntry represents a row entry in tmnxMsdpNgPeerTable for a MSDP peer. Entries can be created and deleted via SNMP SET operations through tmnxMsdpNgPeerRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgPeerEntry  

tmnxMsdpNgPeerAddressType 1.3.6.1.4.1.6527.3.1.2.104.3.1.1
The value of tmnxMsdpNgPeerAddressType indicates the type of tmnxMsdpNgPeerAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgPeerAddress 1.3.6.1.4.1.6527.3.1.2.104.3.1.2
The value of tmnxMsdpNgPeerAddress indicates the address of the MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgPeerRowStatus 1.3.6.1.4.1.6527.3.1.2.104.3.1.3
tmnxMsdpNgPeerRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpNgPeerMaxActiveSources 1.3.6.1.4.1.6527.3.1.2.104.3.1.4
The value of tmnxMsdpNgPeerMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpNgPeerMsgRcvRate 1.3.6.1.4.1.6527.3.1.2.104.3.1.5
The value of tmnxMsdpNgPeerMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgPeerMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpNgPeerMsgRcvRateTime 1.3.6.1.4.1.6527.3.1.2.104.3.1.6
The value of tmnxMsdpNgPeerMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpNgPeerMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpNgPeerMsgRcvRateThd 1.3.6.1.4.1.6527.3.1.2.104.3.1.7
The value of tmnxMsdpNgPeerMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgPeerMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpNgPeerAuthKey 1.3.6.1.4.1.6527.3.1.2.104.3.1.8
The value of tmnxMsdpNgPeerAuthKey specifies the authentication key to be used for a specific MSDP peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default, all MSDP messages are accepted and the MD5 signature option authentication key is disabled
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

tmnxMsdpNgPeerAuthKeyEncrypted 1.3.6.1.4.1.6527.3.1.2.104.3.1.9
When the value of tmnxMsdpNgPeerAuthKeyEncrypted is 'true', the password specified by tmnxMsdpNgPeerAuthKey is in the encrypted form. When the value of tmnxMsdpNgPeerAuthKeyEncrypted is 'false', the password specified by tmnxMsdpNgPeerAuthKey is in plain text. tmnxMsdpNgPeerAuthKey and tmnxMsdpNgPeerAuthKeyEncrypted, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpNgPeerDefaultPeer 1.3.6.1.4.1.6527.3.1.2.104.3.1.10
The value of tmnxMsdpNgPeerDefaultPeer is used to configure a peer as the default Msdp peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpNgPeerAdminState 1.3.6.1.4.1.6527.3.1.2.104.3.1.11
The value of tmnxMsdpNgPeerAdminState specifies the desired administrative state for a MSDP peer. When a MSDP peer is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer group is also disabled. By default, the state of a MSDP peer is 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpNgPeerExportPolicy1 1.3.6.1.4.1.6527.3.1.2.104.3.1.12
The value of tmnxMsdpNgPeerExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerExportPolicy2 1.3.6.1.4.1.6527.3.1.2.104.3.1.13
The value of tmnxMsdpNgPeerExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerExportPolicy3 1.3.6.1.4.1.6527.3.1.2.104.3.1.14
The value of tmnxMsdpNgPeerExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerExportPolicy4 1.3.6.1.4.1.6527.3.1.2.104.3.1.15
The value of tmnxMsdpNgPeerExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerExportPolicy5 1.3.6.1.4.1.6527.3.1.2.104.3.1.16
The value of tmnxMsdpNgPeerExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerImportPolicy1 1.3.6.1.4.1.6527.3.1.2.104.3.1.17
The value of tmnxMsdpNgPeerImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerImportPolicy2 1.3.6.1.4.1.6527.3.1.2.104.3.1.18
The value of tmnxMsdpNgPeerImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerImportPolicy3 1.3.6.1.4.1.6527.3.1.2.104.3.1.19
The value of tmnxMsdpNgPeerImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerImportPolicy4 1.3.6.1.4.1.6527.3.1.2.104.3.1.20
The value of tmnxMsdpNgPeerImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerImportPolicy5 1.3.6.1.4.1.6527.3.1.2.104.3.1.21
The value of tmnxMsdpNgPeerImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerLocalAddressType 1.3.6.1.4.1.6527.3.1.2.104.3.1.22
The value of tmnxMsdpNgPeerLocalAddressType is used to configure the type of tmnxMsdpNgPeerLocalAddress.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgPeerLocalAddress 1.3.6.1.4.1.6527.3.1.2.104.3.1.23
The value of tmnxMsdpNgPeerLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgPeerState 1.3.6.1.4.1.6527.3.1.2.104.3.1.24
The value of tmnxMsdpNgPeerState indicates the status of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER listen(0), established(1), inactive(2), disabled(3), connecting(4)  

tmnxMsdpNgPeerLastUpOrDown 1.3.6.1.4.1.6527.3.1.2.104.3.1.25
The value of tmnxMsdpNgPeerLastUpOrDown indicates the time at which the most recent peer-state change occurred.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpNgPeerConRetry 1.3.6.1.4.1.6527.3.1.2.104.3.1.26
The value of tmnxMsdpNgPeerConRetry indicates number of peer connection retry attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStateTimer 1.3.6.1.4.1.6527.3.1.2.104.3.1.27
The value of tmnxMsdpNgPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpNgPeerTimeout 1.3.6.1.4.1.6527.3.1.2.104.3.1.28
The value of tmnxMsdpNgPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpNgPeerSAAccepted 1.3.6.1.4.1.6527.3.1.2.104.3.1.29
The value of tmnxMsdpNgPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgPeerSARx 1.3.6.1.4.1.6527.3.1.2.104.3.1.30
The value of tmnxMsdpNgPeerSARx indicates the number of entries in the source-active cache received by the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgPeerLastASLimit 1.3.6.1.4.1.6527.3.1.2.104.3.1.31
The value of tmnxMsdpNgPeerLastASLimit indicates the time that the last active source limit was triggered.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpNgPeerOperLclAddrType 1.3.6.1.4.1.6527.3.1.2.104.3.1.32
The value of tmnxMsdpNgPeerOperLclAddrType indicates the address type of tmnxMsdpNgPeerOperLclAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgPeerOperLclAddr 1.3.6.1.4.1.6527.3.1.2.104.3.1.33
The value of tmnxMsdpNgPeerOperLclAddr indicates the operational value of the local address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgPeerGroupTable 1.3.6.1.4.1.6527.3.1.2.104.4
The tmnxMsdpNgPeerGroupTable provides a listing of all MSDP Peer Groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgPeerGroupEntry

tmnxMsdpNgPeerGroupEntry 1.3.6.1.4.1.6527.3.1.2.104.4.1
tmnxMsdpNgPeerGroupEntry represents a MSDP Peer Group. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgPeerGroupEntry  

tmnxMsdpNgPeerGroupName 1.3.6.1.4.1.6527.3.1.2.104.4.1.1
The value of tmnxMsdpNgPeerGroupName indicates the peer group name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tmnxMsdpNgPeerGroupRowStatus 1.3.6.1.4.1.6527.3.1.2.104.4.1.2
tmnxMsdpNgPeerGroupRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpNgPeerGroupMsgRcvRate 1.3.6.1.4.1.6527.3.1.2.104.4.1.3
The value of tmnxMsdpNgPeerGroupMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgMsgRcvRateTime seconds By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpNgPeerGrpMsgRcvRateTime 1.3.6.1.4.1.6527.3.1.2.104.4.1.4
The value of tmnxMsdpNgPeerGrpMsgRcvRateTime specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpNgPeerGroupMsgRcvRateThd 1.3.6.1.4.1.6527.3.1.2.104.4.1.5
The value of tmnxMsdpNgPeerGroupMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgPeerGroupMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpNgPeerGroupAdminState 1.3.6.1.4.1.6527.3.1.2.104.4.1.6
The value of tmnxMsdpNgPeerGroupAdminState specifies the desired administrative state for a MSDP peer group. When tmnxMsdpNgPeerGroupAdminState is 'outOfService' the operational state of the MSDP peer group as well as the operational state of other entities under it, like other peers is also disabled. By default, the state of a MSDP peer group is 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpNgPeerGroupExportPolicy1 1.3.6.1.4.1.6527.3.1.2.104.4.1.7
The value of tmnxMsdpNgPeerGroupExportPolicy1 specifies the export policy number 1 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupExportPolicy2 1.3.6.1.4.1.6527.3.1.2.104.4.1.8
The value of tmnxMsdpNgPeerGroupExportPolicy2 specifies the export policy number 2 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupExportPolicy3 1.3.6.1.4.1.6527.3.1.2.104.4.1.9
The value of tmnxMsdpNgPeerGroupExportPolicy3 specifies the export policy number 3 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupExportPolicy4 1.3.6.1.4.1.6527.3.1.2.104.4.1.10
The value of tmnxMsdpNgPeerGroupExportPolicy4 specifies the export policy number 4 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupExportPolicy5 1.3.6.1.4.1.6527.3.1.2.104.4.1.11
The value of tmnxMsdpNgPeerGroupExportPolicy5 specifies the export policy number 5 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupImportPolicy1 1.3.6.1.4.1.6527.3.1.2.104.4.1.12
The value of tmnxMsdpNgPeerGroupImportPolicy1 specifies the import policy number 1 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupImportPolicy2 1.3.6.1.4.1.6527.3.1.2.104.4.1.13
The value of tmnxMsdpNgPeerGroupImportPolicy2 specifies the import policy number 2 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupImportPolicy3 1.3.6.1.4.1.6527.3.1.2.104.4.1.14
The value of tmnxMsdpNgPeerGroupImportPolicy3 specifies the import policy number 3 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupImportPolicy4 1.3.6.1.4.1.6527.3.1.2.104.4.1.15
The value of tmnxMsdpNgPeerGroupImportPolicy4 specifies the import policy number 4 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupImportPolicy5 1.3.6.1.4.1.6527.3.1.2.104.4.1.16
The value of tmnxMsdpNgPeerGroupImportPolicy5 specifies the import policy number 5 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGroupLocalAddrType 1.3.6.1.4.1.6527.3.1.2.104.4.1.17
The value of tmnxMsdpNgPeerGroupLocalAddrType is used to configure the type of tmnxMsdpNgPeerGroupLocalAddress.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgPeerGroupLocalAddress 1.3.6.1.4.1.6527.3.1.2.104.4.1.18
The value of tmnxMsdpNgPeerGroupLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgPeerGroupMode 1.3.6.1.4.1.6527.3.1.2.104.4.1.19
The value of tmnxMsdpNgPeerGroupMode is used to configure groups of peers in a full mesh topology. MSDP peers can be grouped in a full-mesh topology that prevents excessive flooding of source-active messages to neighboring peers. When operating in meshed mode, source-active messages received from a mesh group member are always accepted but are not flooded to other members of the same mesh group. As a result, these source-active messages are only flooded to non-mesh group peers or members of other mesh groups. By default 'standard' (non-meshed) mode is used.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER standard(1), mesh-group(2)  

tmnxMsdpNgPeerGroupMaxActSources 1.3.6.1.4.1.6527.3.1.2.104.4.1.20
The value of tmnxMsdpNgPeerGroupMaxActSources specifies the maximum number of source active messages that will be accepted by this MSDP peer group. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpNgPeerGroupActMsgsExMax 1.3.6.1.4.1.6527.3.1.2.104.4.1.21
The value of tmnxMsdpNgPeerGroupActMsgsExMax indicates the number of source active messages received from this group that exceeded the established maximum number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerGrpSARejExpPolicy 1.3.6.1.4.1.6527.3.1.2.104.4.1.22
The value of tmnxMsdpNgPeerGrpSARejExpPolicy indicates the number of source active messages received from this group that were were not sent due to export policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerGrpSARejImpPolicy 1.3.6.1.4.1.6527.3.1.2.104.4.1.23
The value of tmnxMsdpNgPeerGrpSARejImpPolicy indicates the number of source active messages received from this group that were rejected due to import policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerGrpPeerTable 1.3.6.1.4.1.6527.3.1.2.104.5
The tmnxMsdpNgPeerGrpPeerTable table provides a listing of all peers under MSDP Peer Groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgPeerGrpPeerEntry

tmnxMsdpNgPeerGrpPeerEntry 1.3.6.1.4.1.6527.3.1.2.104.5.1
An entry representing a peer in an MSDP Peer Group. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgPeerGrpPeerEntry  

tmnxMsdpNgPeerGrpPeerAddressType 1.3.6.1.4.1.6527.3.1.2.104.5.1.1
The value of tmnxMsdpNgPeerGrpPeerAddressType indicates the type of address of the MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgPeerGrpPeerAddress 1.3.6.1.4.1.6527.3.1.2.104.5.1.2
The value of tmnxMsdpNgPeerGrpPeerAddress indicates the address of the MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgPeerGrpPeerRowStatus 1.3.6.1.4.1.6527.3.1.2.104.5.1.3
tmnxMsdpNgPeerGrpPeerRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpNgPeerGrpPeerMaxActSrcs 1.3.6.1.4.1.6527.3.1.2.104.5.1.4
The value of tmnxMsdpNgPeerGrpPeerMaxActSrcs specifies the maximum number of source active messages that will be accepted by MSDP peer group peer. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpNgPeerGrpPeerMsgRcvRt 1.3.6.1.4.1.6527.3.1.2.104.5.1.5
The value of tmnxMsdpNgPeerGrpPeerMsgRcvRt specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpNgPeerGrpPeerMsgRxRtTime 1.3.6.1.4.1.6527.3.1.2.104.5.1.6
The value of tmnxMsdpNgPeerGrpPeerMsgRxRtTime specifies the time in seconds that together with tmnxMsdpNgPeerGrpPeerMsgRcvRt defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpNgPeerGrpPeerMsgRcvRtThd 1.3.6.1.4.1.6527.3.1.2.104.5.1.7
The value of tmnxMsdpNgPeerGrpPeerMsgRcvRtThd specifies the number of MSDP messages that can be processed before tmnxMsdpNgPeerGrpPeerMsgRcvRt is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpNgPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpNgPeerGrpPeerMsgRxRtTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpNgPeerGrpPeerAuthKey 1.3.6.1.4.1.6527.3.1.2.104.5.1.8
The value of tmnxMsdpNgPeerGrpPeerAuthKey specifies the authentication key to be used for a specific MSDP peer group peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default all MSDP messages are accepted and the MD5 signature option authentication key is disabled
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

tmnxMsdpNgPeerGrpPeerAKeyEncrypt 1.3.6.1.4.1.6527.3.1.2.104.5.1.9
When the value of tmnxMsdpNgPeerGrpPeerAKeyEncrypt is 'true', the password specified by tmnxMsdpNgPeerGrpPeerAuthKey is in the encrypted form. When the value of tmnxMsdpNgPeerGrpPeerAKeyEncrypt is 'false', the password specified by tmnxMsdpNgPeerGrpPeerAuthKey is in plain text. tmnxMsdpNgPeerGrpPeerAuthKey and tmnxMsdpNgPeerGrpPeerAKeyEncrypt, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpNgPeerGrpPeerDefaultPeer 1.3.6.1.4.1.6527.3.1.2.104.5.1.10
The value of tmnxMsdpNgPeerGrpPeerDefaultPeer is used to configure a peer as the default MSDP peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpNgPeerGrpPeerAdminState 1.3.6.1.4.1.6527.3.1.2.104.5.1.11
The value of tmnxMsdpNgPeerGrpPeerAdminState specifies the desired administrative state for a peer under a MSDP peer group. When tmnxMsdpNgPeerGrpPeerAdminState is 'outOfService' the operational state of the MSDP peer is disabled. By default, tmnxMsdpNgPeerGrpPeerAdminState is 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpNgPeerGrpPeerExportPlcy1 1.3.6.1.4.1.6527.3.1.2.104.5.1.12
The value of tmnxMsdpNgPeerGrpPeerExportPlcy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerGrpPeerExportPlcy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerExportPlcy2 1.3.6.1.4.1.6527.3.1.2.104.5.1.13
The value of tmnxMsdpNgPeerGrpPeerExportPlcy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerExportPlcy3 1.3.6.1.4.1.6527.3.1.2.104.5.1.14
The value of tmnxMsdpNgPeerGrpPeerExportPlcy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerExportPlcy4 1.3.6.1.4.1.6527.3.1.2.104.5.1.15
The value of tmnxMsdpNgPeerGrpPeerExportPlcy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerExportPlcy5 1.3.6.1.4.1.6527.3.1.2.104.5.1.16
The value of tmnxMsdpNgPeerGrpPeerExportPlcy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerExportPlcy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerImportPlcy1 1.3.6.1.4.1.6527.3.1.2.104.5.1.17
The value of tmnxMsdpNgPeerGrpPeerImportPlcy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpNgPeerGrpPeerImportPlcy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerImportPlcy2 1.3.6.1.4.1.6527.3.1.2.104.5.1.18
The value of tmnxMsdpNgPeerGrpPeerImportPlcy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerImportPlcy3 1.3.6.1.4.1.6527.3.1.2.104.5.1.19
The value of tmnxMsdpNgPeerGrpPeerImportPlcy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerImportPlcy4 1.3.6.1.4.1.6527.3.1.2.104.5.1.20
The value of tmnxMsdpNgPeerGrpPeerImportPlcy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerImportPlcy5 1.3.6.1.4.1.6527.3.1.2.104.5.1.21
The value of tmnxMsdpNgPeerGrpPeerImportPlcy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpNgPeerGrpPeerImportPlcy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpNgPeerGrpPeerLocAddrType 1.3.6.1.4.1.6527.3.1.2.104.5.1.22
The value of tmnxMsdpNgPeerGrpPeerLocAddrType specifies the type of tmnxMsdpNgPeerGrpPeerLocalAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgPeerGrpPeerLocalAddr 1.3.6.1.4.1.6527.3.1.2.104.5.1.23
The value of tmnxMsdpNgPeerGrpPeerLocalAddr is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgPeerGrpPeerState 1.3.6.1.4.1.6527.3.1.2.104.5.1.24
The value of tmnxMsdpNgPeerGrpPeerState indicates the status of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER listen(0), established(1), inactive(2), disabled(3), connecting(4)  

tmnxMsdpNgPeerGrpPeerLstUpOrDwn 1.3.6.1.4.1.6527.3.1.2.104.5.1.25
The value of tmnxMsdpNgPeerGrpPeerLstUpOrDwn indicates the time at which the most recent peer-state change occurred.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpNgPeerGrpPeerConRetry 1.3.6.1.4.1.6527.3.1.2.104.5.1.26
The value of tmnxMsdpNgPeerGrpPeerConRetry indicates number of peer connection retry attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerGrpPeerStateTimer 1.3.6.1.4.1.6527.3.1.2.104.5.1.27
The value of tmnxMsdpNgPeerGrpPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpNgPeerGrpPeerTimeout 1.3.6.1.4.1.6527.3.1.2.104.5.1.28
The value of tmnxMsdpNgPeerGrpPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpNgPeerGrpPeerSAAccepted 1.3.6.1.4.1.6527.3.1.2.104.5.1.29
The value of tmnxMsdpNgPeerGrpPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgPeerGrpPeerSARx 1.3.6.1.4.1.6527.3.1.2.104.5.1.30
The value of tmnxMsdpNgPeerGrpPeerSARx indicates the number of entries in the source-active cache received by the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgPeerGrpPeerLastASLimit 1.3.6.1.4.1.6527.3.1.2.104.5.1.31
The value of tmnxMsdpNgPeerGrpPeerLastASLimit indicates the time that the last active source limit was triggered.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpNgPeerGrpPeerOpAddrType 1.3.6.1.4.1.6527.3.1.2.104.5.1.32
The value of tmnxMsdpNgPeerGrpPeerOpAddrType indicates the type of tmnxMsdpNgPeerGrpPeerOpAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgPeerGrpPeerOpAddr 1.3.6.1.4.1.6527.3.1.2.104.5.1.33
The value of tmnxMsdpNgPeerGrpPeerOpAddr indicates the operational value of the local end of a MSDP session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgSourceTable 1.3.6.1.4.1.6527.3.1.2.104.6
The tmnxMsdpNgSourceTable provides a listing of all MSDP Source configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgSourceEntry

tmnxMsdpNgSourceEntry 1.3.6.1.4.1.6527.3.1.2.104.6.1
An tmnxMsdpNgSourceEntry represents a MSDP Source configuration. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgSourceEntry  

tmnxMsdpNgSourcePrefixType 1.3.6.1.4.1.6527.3.1.2.104.6.1.1
The value of tmnxMsdpNgSourcePrefixType indicates the type of tmnxMsdpNgSourcePrefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSourcePrefix 1.3.6.1.4.1.6527.3.1.2.104.6.1.2
The value of tmnxMsdpNgSourcePrefix indicates the IP address of the sources from which the source active messages would be accepted.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgSourceMask 1.3.6.1.4.1.6527.3.1.2.104.6.1.3
The value of tmnxMsdpNgSourceMask indicates the mask to be used along with tmnxMsdpNgSourcePrefix to obtain the range of addresses from which the router can accept source active messages.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength 0..128  

tmnxMsdpNgSourceRowStatus 1.3.6.1.4.1.6527.3.1.2.104.6.1.4
tmnxMsdpNgSourceRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpNgSourceMaxActiveSources 1.3.6.1.4.1.6527.3.1.2.104.6.1.5
The value of tmnxMsdpNgSourceMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpNgSourceDiscMethod 1.3.6.1.4.1.6527.3.1.2.104.6.1.6
The value of tmnxMsdpNgSourceDiscMethod indicates the discovery method for this multicast source. If the source entry was created by an user, the value of this field is 'configured'. If the source was created dynamically, the value is 'dynamic'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(0), configured(1)  

tmnxMsdpNgSourceSrcActMsgsExMax 1.3.6.1.4.1.6527.3.1.2.104.6.1.7
The value of tmnxMsdpNgSourceSrcActMsgsExMax indicates the number of source active messages received from this source that exceeded the established maximum number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgSourceLastExEventTime 1.3.6.1.4.1.6527.3.1.2.104.6.1.8
The value of tmnxMsdpNgSourceLastExEventTime indicates the time the last exceed event was triggered.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpNgSATable 1.3.6.1.4.1.6527.3.1.2.104.7
The tmnxMsdpNgSATable table stores the MSDP Source Active(SA) advertisements currently in the MSDP speaker's cache.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgSAEntry

tmnxMsdpNgSAEntry 1.3.6.1.4.1.6527.3.1.2.104.7.1
An entry representing an MSDP SA advertisement. The INDEX to this table includes msdpSACacheOriginRP for diagnosing incorrect MSDP advertisements; normally a Source and Group pair would be unique. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgSAEntry  

tmnxMsdpNgSAGroupAddrType 1.3.6.1.4.1.6527.3.1.2.104.7.1.1
The value of tmnxMsdpNgSAGroupAddrType indicates the address type of tmnxMsdpNgSAGroupAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSAGroupAddr 1.3.6.1.4.1.6527.3.1.2.104.7.1.2
The value of tmnxMsdpNgSAGroupAddr indicates the group address of the Source Active entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgSASourceAddrType 1.3.6.1.4.1.6527.3.1.2.104.7.1.3
The value of tmnxMsdpNgSASourceAddrType indicates the address type of tmnxMsdpNgSASourceAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSASourceAddr 1.3.6.1.4.1.6527.3.1.2.104.7.1.4
The value of tmnxMsdpNgSASourceAddr indicates the source address of the Source Active entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgSAOriginRPType 1.3.6.1.4.1.6527.3.1.2.104.7.1.5
The value of tmnxMsdpNgSAOriginRPType indicates the address type of tmnxMsdpNgSAOriginRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSAOriginRP 1.3.6.1.4.1.6527.3.1.2.104.7.1.6
The value of tmnxMsdpNgSAOriginRP indicates the origin RP address of the Source Active entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgSAPrLearnFrType 1.3.6.1.4.1.6527.3.1.2.104.7.1.7
The value of tmnxMsdpNgSAPrLearnFrType indicates the address type of tmnxMsdpNgSAPeerLearntFrom.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSAPeerLearntFrom 1.3.6.1.4.1.6527.3.1.2.104.7.1.8
The value of tmnxMsdpNgSAPeerLearntFrom indicates the peer from which this Source Active entry was last accepted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgSARPFPeerType 1.3.6.1.4.1.6527.3.1.2.104.7.1.9
The value of tmnxMsdpNgSARPFPeerType indicates the address type of tmnxMsdpNgSARPFPeer.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSARPFPeer 1.3.6.1.4.1.6527.3.1.2.104.7.1.10
The value of tmnxMsdpNgSARPFPeer indicates the peer from which an SA message corresponding to this cache entry would be accepted (i.e. the RPF peer for tmnxMsdpNgSAOriginRP). This may be different than tmnxMsdpNgSAPeerLearntFrom if this entry was created by an MSDP SA-Response.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpNgSAUpTime 1.3.6.1.4.1.6527.3.1.2.104.7.1.11
The value of tmnxMsdpNgSAUpTime indicates the time since this entry was first placed in the Source Active (SA) cache. It is the difference between the time that the entry was first placed in the SA cache and the current time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpNgSAExpiryTime 1.3.6.1.4.1.6527.3.1.2.104.7.1.12
The value of tmnxMsdpNgSAExpiryTime indicates the time remaining before this entry will expire from the Source Active (SA) cache. It is difference between the current time and the time that the entry will expire.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpNgPeerStatsTable 1.3.6.1.4.1.6527.3.1.2.104.8
The table tmnxMsdpNgPeerStatsTable is the statistics information related to a MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgPeerStatsEntry

tmnxMsdpNgPeerStatsEntry 1.3.6.1.4.1.6527.3.1.2.104.8.1
tmnxMsdpNgPeerStatsEntry is an entry (conceptual row) in the tmnxMsdpNgPeerStatsTable. Each entry represents a MSDP peer related statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgPeerStatsEntry  

tmnxMsdpNgPeerStatsActSrcLimExcd 1.3.6.1.4.1.6527.3.1.2.104.8.1.1
The value of tmnxMsdpNgPeerStatsActSrcLimExcd indicates the number of times the global active source limit has been exceeded by this peer instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsLastStChange 1.3.6.1.4.1.6527.3.1.2.104.8.1.2
The value of tmnxMsdpNgPeerStatsLastStChange indicates how long ago the peer state changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpNgPeerStatsLastMsgPeer 1.3.6.1.4.1.6527.3.1.2.104.8.1.3
The value of tmnxMsdpNgPeerStatsLastMsgPeer indicates how long ago the last message was received from this peer instance.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpNgPeerStatsRPFFailures 1.3.6.1.4.1.6527.3.1.2.104.8.1.4
The value of tmnxMsdpNgPeerStatsRPFFailures indicates number of reverse path forwarding (RPF) failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsRemoteCloses 1.3.6.1.4.1.6527.3.1.2.104.8.1.5
The value of tmnxMsdpNgPeerStatsRemoteCloses indicates the number of times the remote peer closed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsPeerTimeouts 1.3.6.1.4.1.6527.3.1.2.104.8.1.6
The value of tmnxMsdpNgPeerStatsPeerTimeouts indicates the number of peer timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSAMsgsSent 1.3.6.1.4.1.6527.3.1.2.104.8.1.7
The value of tmnxMsdpNgPeerStatsSAMsgsSent indicates the number of source-active messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSAMsgsRx 1.3.6.1.4.1.6527.3.1.2.104.8.1.8
The value of tmnxMsdpNgPeerStatsSAMsgsRx indicates the number of source-active messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSAReqMsgsSent 1.3.6.1.4.1.6527.3.1.2.104.8.1.9
The value of tmnxMsdpNgPeerStatsSAReqMsgsSent indicates the number of source-active request messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSAReqMsgsRx 1.3.6.1.4.1.6527.3.1.2.104.8.1.10
The value of tmnxMsdpNgPeerStatsSAReqMsgsRx indicates the number of source-active request messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSAResMsgsSent 1.3.6.1.4.1.6527.3.1.2.104.8.1.11
The value of tmnxMsdpNgPeerStatsSAResMsgsSent indicates the number of source-active response messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSAResMsgsRx 1.3.6.1.4.1.6527.3.1.2.104.8.1.12
The value of tmnxMsdpNgPeerStatsSAResMsgsRx indicates the number of source-active response messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsKAMsgsSent 1.3.6.1.4.1.6527.3.1.2.104.8.1.13
The value of tmnxMsdpNgPeerStatsKAMsgsSent indicates the number of keep-alive messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsKAMsgsRx 1.3.6.1.4.1.6527.3.1.2.104.8.1.14
The value of tmnxMsdpNgPeerStatsKAMsgsRx indicates the number of keep-alive messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsUnknMsgsRx 1.3.6.1.4.1.6527.3.1.2.104.8.1.15
The value of tmnxMsdpNgPeerStatsUnknMsgsRx indicates the number of unknown messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsErrMsgsRx 1.3.6.1.4.1.6527.3.1.2.104.8.1.16
The value of tmnxMsdpNgPeerStatsErrMsgsRx indicates number of error messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSALearnt 1.3.6.1.4.1.6527.3.1.2.104.8.1.17
The value of tmnxMsdpNgPeerStatsSALearnt indicates the number of unique source active entries in the cache learned from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpNgPeerStatsSARejExpPlcy 1.3.6.1.4.1.6527.3.1.2.104.8.1.18
The value of tmnxMsdpNgPeerStatsSARejExpPlcy indicates the number of source active messages from the peer that were not sent due to export policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsSARejImpPlcy 1.3.6.1.4.1.6527.3.1.2.104.8.1.19
The value of tmnxMsdpNgPeerStatsSARejImpPlcy indicates the number of source active messages from the peer that were rejected due to import policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgPeerStatsResvMsgsRx 1.3.6.1.4.1.6527.3.1.2.104.8.1.20
The value of tmnxMsdpNgPeerStatsResvMsgsRx indicates the number of MSDP messages received with type 'Reserved'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpNgSrcActRejTable 1.3.6.1.4.1.6527.3.1.2.104.9
The tmnxMsdpNgSrcActRejTable table stores the MSDP Source Active(SA) advertisements rejected from the MSDP speaker's cache.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpNgSrcActRejEntry

tmnxMsdpNgSrcActRejEntry 1.3.6.1.4.1.6527.3.1.2.104.9.1
An entry representing an MSDP SA advertisement that is rejected. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpNgSrcActRejEntry  

tmnxMsdpNgSARejPeerGroupName 1.3.6.1.4.1.6527.3.1.2.104.9.1.1
The value of tmnxMsdpNgSARejPeerGroupName indicates the peer group name of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxMsdpNgSARejGroupAddrType 1.3.6.1.4.1.6527.3.1.2.104.9.1.2
The value of tmnxMsdpNgSARejGroupAddrType indicates the address type of tmnxMsdpNgSARejGroupAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSARejGroupAddr 1.3.6.1.4.1.6527.3.1.2.104.9.1.3
The value of tmnxMsdpNgSARejGroupAddr indicates the group address of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpNgSARejSourceAddrType 1.3.6.1.4.1.6527.3.1.2.104.9.1.4
The value of tmnxMsdpNgSARejSourceAddrType indicates the address type of tmnxMsdpNgSARejSourceAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSARejSourceAddr 1.3.6.1.4.1.6527.3.1.2.104.9.1.5
The value of tmnxMsdpNgSARejSourceAddr indicates the source address of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpNgSARejOriginRPType 1.3.6.1.4.1.6527.3.1.2.104.9.1.6
The value of tmnxMsdpNgSARejOriginRPType indicates the address type of tmnxMsdpNgSARejOriginRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSARejOriginRP 1.3.6.1.4.1.6527.3.1.2.104.9.1.7
The value of tmnxMsdpNgSARejOriginRP indicates the origin rendezvous point (RP) address of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpNgSARejPeerAddrType 1.3.6.1.4.1.6527.3.1.2.104.9.1.8
The value of tmnxMsdpNgSARejPeerAddrType indicates the address type of tmnxMsdpNgSARejPeerAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpNgSARejPeerAddr 1.3.6.1.4.1.6527.3.1.2.104.9.1.9
The value of tmnxMsdpNgSARejPeerAddr indicates the peer from which this rejected Source Active entry was last received.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpNgSARejFailureReason 1.3.6.1.4.1.6527.3.1.2.104.9.1.10
The value of tmnxMsdpNgSARejFailureReason indicates the reason why this Source Active entry is rejected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER importPolicyFailure(1), exportPolicyFailure(2), rpfFailure(3), actSrcLimitExceeded(4), srcActSrcLimitExceeded(5), peerActSrcLimitExceeded(6), groupActSrcLimitExceeded(7), groupPeerActSrcLimitExceeded(8)  

tmnxMsdpNgActSrcLimExcd 1.3.6.1.4.1.6527.3.1.3.104.0.1
The tmnxMsdpNgActSrcLimExcd event is generated whenever the global active source limit has been exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpNgPeerActSrcLimExcd 1.3.6.1.4.1.6527.3.1.3.104.0.2
The tmnxMsdpNgPeerActSrcLimExcd event is generated whenever the active source limit has been exceeded for the peer.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpNgRPFFailure 1.3.6.1.4.1.6527.3.1.3.104.0.3
The tmnxMsdpNgRPFFailure event is generated whenever a RPF(Reverse Path Forwarding) failure occurs for a source configured by user.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpNgSourceSrcActMsgsExcd 1.3.6.1.4.1.6527.3.1.3.104.0.4
The tmnxMsdpNgSourceSrcActMsgsExcd event is generated when the source active messages received from this source has exceeded the established maximum number.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpNgGroupSrcActMsgsExcd 1.3.6.1.4.1.6527.3.1.3.104.0.5
The tmnxMsdpNgGroupSrcActMsgsExcd event is generated when the source active messages received from this group has exceeded the established maximum number.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpNgV13v0Compliance 1.3.6.1.4.1.6527.3.1.1.104.1.1
The compliance statement for management of MSDP features on Nokia 7x50 SR series systems.
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxMsdpNgGeneralGroup 1.3.6.1.4.1.6527.3.1.1.104.2.1
A collection of global objects supporting management of MSDP protocol on Nokia 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpNgPeerGroup 1.3.6.1.4.1.6527.3.1.1.104.2.2
A collection of objects supporting management of MSDP peers on Nokia 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpNgPeerGroupGroup 1.3.6.1.4.1.6527.3.1.1.104.2.3
A collection of objects supporting management of MSDP peer groups on Nokia 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpNgSourceGroup 1.3.6.1.4.1.6527.3.1.1.104.2.4
A collection of objects supporting management of MSDP sources on Nokia 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpNgSAGroup 1.3.6.1.4.1.6527.3.1.1.104.2.5
A collection of objects supporting management of MSDP source active information on Nokia 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpNgNotificationGroup 1.3.6.1.4.1.6527.3.1.1.104.2.6
The group of notifications supporting management of the MSDP operations on Nokia 7x50 SR series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxMsdpNgSARejGroup 1.3.6.1.4.1.6527.3.1.1.104.2.7
A collection of objects supporting management of MSDP rejected source active information on Nokia 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor