TIMETRA-MPLS-MIB

File: TIMETRA-MPLS-MIB.mib (421989 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
IF-MIB	INET-ADDRESS-MIB	MPLS-LSR-MIB
MPLS-TE-MIB	TIMETRA-TC-MIB	TIMETRA-GLOBAL-MIB
TIMETRA-VRTR-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Unsigned32	IpAddress	Counter64
Counter32	Integer32	Gauge32
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
RowStatus	RowPointer	TruthValue
TimeStamp	TimeInterval	TestAndIncr
TEXTUAL-CONVENTION	InterfaceIndexOrZero	InetAddressIPv6
MplsLabel	MplsLSPID	mplsXCLspId
mplsInSegmentEntry	mplsOutSegmentEntry	mplsTunnelIndex
mplsTunnelInstance	mplsTunnelIngressLSRId	mplsTunnelARHopEntry
MplsTunnelIndex	TmnxAdminState	TmnxOperState
TNamedItem	TNamedItemOrEmpty	TmnxActionType
TmnxVRtrMplsLspID	TmnxRsvpDSTEClassType	TLNamedItemOrEmpty
TmnxEnabledDisabled	TmnxMplsTpGlobalID	TmnxMplsTpNodeID
timetraSRMIBModules	tmnxSRObjs	tmnxSRNotifyPrefix
tmnxSRConfs	vRtrID	vRtrIfIndex
InetAddressType	InetAddress

Defined Types

TmnxMplsLspFailCode
TmnxMplsLspFailCode is an enumerated integer that defines the reason for LSP Path and LSP Crossconnect failure.
TEXTUAL-CONVENTION
	INTEGER	noError(0), admissionControlError(1), noRouteToDestination(2), trafficControlSystemError(3), routingError(4), noResourcesAvailable(5), badNode(6), routingLoop(7), labelAllocationError(8), badL3PID(9), tunnelLocallyRepaired(10), unknownObjectClass(11), unknownCType(12), noEgressMplsInterface(13), noEgressRsvpInterface(14), looseHopsInFRRLsp(15), unknown(16), retryExceeded(17), noCspfRouteOwner(18), noCspfRouteToDestination(19), hopLimitExceeded(20), looseHopsInManualBypassLsp(21), emptyPathInManualBypassLsp(22), lspFlowControlled(23), srlgSecondaryNotDisjoint(24), srlgPrimaryCspfDisabled(25), srlgPrimaryPathDown(26), localLinkMaintenance(27), unexpectedCtObject(28), unsupportedCt(29), invalidCt(30), invCtAndSetupPri(31), invCtAndHoldPri(32), invCtAndSetupAndHoldPri(33), localNodeMaintenance(34), softPreemption(35), p2mpNotSupported(36), badXro(37), localNodeInXro(38), routeBlockedByXro(39), xroTooComplex(40), rsvpNotSupported(41)

TmnxMplsLabelOwner
TmnxMplsLabelOwner is an enumerated integer that specifies the module that owns a particular MPLS label.
TEXTUAL-CONVENTION
	INTEGER	none(0), rsvp(1), tldp(2), ildp(3), svcmgr(4), bgp(5), mirror(6), static(7), vprn(8)

TmnxMplsOperDownReasonCode
TmnxMplsOperDownReasonCode is an enumerated integer that specifies the reason that the MPLS instance is operationally down.
TEXTUAL-CONVENTION
	INTEGER	operUp(0), adminDown(1), noResources(2), systemIpDown(3), iomFailure(4), clearDown(5)

TmnxMplsMBBType
TmnxMplsMBBType is an enumerated integer that specifies the type of make-before-break (MBB).
TEXTUAL-CONVENTION
	INTEGER	none(0), configChange(1), timerBasedResignal(2), manualResignal(3), globalRevert(4), delayedRetry(5), gracefulShutdown(6), softPreemption(7), pathChange(8), autoBandwidth(9)

TmnxMplsP2mpInstFailCode
TmnxMplsP2mpInstFailCode is an enumerated integer that defines the reason for P2MP instance going down.
TEXTUAL-CONVENTION
	INTEGER	noError(0), noS2LOperational(1)

TmnxMplsRouterId
The value of TmnxMplsRouterId provides a 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router.
TEXTUAL-CONVENTION
	Unsigned32	0..FFFFFFFF

TmnxMplsLspAutoBWLastAdjCause
TmnxMplsLspAutoBWLastAdjCause is an enumerated integer that specifies cause of auto-bandwidth last adjustment.
TEXTUAL-CONVENTION
	INTEGER	none(0), manual(1), normal(2), overflow(3), vllCAC(4)

TmnxMplsLspBgpRSVPLSPTunState
TmnxMplsLspBgpRSVPLSPTunState is an enumerated integer that specifies whether an RSVP LSP is allowed or blocked in its usage as a transport LSP for BGP tunnel routes. In 'include(1)' mode, an RSVP LSPs is allowed to be used as transport LSP for BGP tunnel routes. In 'exclude(2)' mode, an RSVP LSP is not allowed to be used as a transport LSP for BGP tunnel routes.
TEXTUAL-CONVENTION
	INTEGER	include(1), exclude(2)

TmnxMplsLspAddrType
TmnxMplsLspAddrType is an enumerated integer that specifies the address type for an MPLS LSP.
TEXTUAL-CONVENTION
	INTEGER	ipv4(1), nodeId(2)

VRtrMplsLspEntry
SEQUENCE
	vRtrMplsLspIndex	TmnxVRtrMplsLspID
	vRtrMplsLspRowStatus	RowStatus
	vRtrMplsLspLastChange	TimeStamp
	vRtrMplsLspName	TLNamedItemOrEmpty
	vRtrMplsLspAdminState	TmnxAdminState
	vRtrMplsLspOperState	TmnxOperState
	vRtrMplsLspFromAddr	IpAddress
	vRtrMplsLspToAddr	IpAddress
	vRtrMplsLspType	INTEGER
	vRtrMplsLspOutSegIndx	Integer32
	vRtrMplsLspRetryTimer	Unsigned32
	vRtrMplsLspRetryLimit	Unsigned32
	vRtrMplsLspMetric	Unsigned32
	vRtrMplsLspDecrementTtl	TruthValue
	vRtrMplsLspCspf	TruthValue
	vRtrMplsLspFastReroute	TruthValue
	vRtrMplsLspFRHopLimit	Unsigned32
	vRtrMplsLspFRBandwidth	Unsigned32
	vRtrMplsLspClassOfService	TNamedItemOrEmpty
	vRtrMplsLspSetupPriority	Unsigned32
	vRtrMplsLspHoldPriority	Unsigned32
	vRtrMplsLspRecord	TruthValue
	vRtrMplsLspPreference	Unsigned32
	vRtrMplsLspBandwidth	Integer32
	vRtrMplsLspBwProtect	TruthValue
	vRtrMplsLspHopLimit	Unsigned32
	vRtrMplsLspNegotiatedMTU	Unsigned32
	vRtrMplsLspRsvpResvStyle	INTEGER
	vRtrMplsLspRsvpAdspec	TruthValue
	vRtrMplsLspFRMethod	INTEGER
	vRtrMplsLspFRNodeProtect	TruthValue
	vRtrMplsLspAdminGroupInclude	Unsigned32
	vRtrMplsLspAdminGroupExclude	Unsigned32
	vRtrMplsLspAdaptive	TruthValue
	vRtrMplsLspInheritance	Unsigned32
	vRtrMplsLspOptimizeTimer	Unsigned32
	vRtrMplsLspOperFastReroute	TruthValue
	vRtrMplsLspFRObject	TruthValue
	vRtrMplsLspHoldTimer	Unsigned32
	vRtrMplsLspCspfTeMetricEnabled	TruthValue
	vRtrMplsLspP2mpId	Unsigned32
	vRtrMplsLspClassType	TmnxRsvpDSTEClassType
	vRtrMplsLspOperMetric	Unsigned32
	vRtrMplsLspLdpOverRsvpInclude	TruthValue
	vRtrMplsLspLeastFill	TruthValue
	vRtrMplsLspVprnAutoBindInclude	TruthValue
	vRtrMplsLspMainCTRetryLimit	Unsigned32
	vRtrMplsLspIgpShortcut	TruthValue
	vRtrMplsLspOriginTemplate	TNamedItemOrEmpty
	vRtrMplsLspAutoBandwidth	TruthValue
	vRtrMplsLspCspfToFirstLoose	TruthValue
	vRtrMplsLspPropAdminGroup	TruthValue
	vRtrMplsLspBgpShortcut	TruthValue
	vRtrMplsLspBgpTransportTunnel	TmnxMplsLspBgpRSVPLSPTunState
	vRtrMplsLspSwitchStbyPath	TmnxActionType
	vRtrMplsLspSwitchStbyPathIndex	MplsTunnelIndex
	vRtrMplsLspSwitchStbyPathForce	TruthValue
	vRtrMplsLspExcludeNodeAddrType	InetAddressType
	vRtrMplsLspExcludeNodeAddr	InetAddress
	vRtrMplsLspIgpShortcutLfaType	INTEGER
	vRtrMplsLspToAddrType	TmnxMplsLspAddrType
	vRtrMplsLspFromAddrType	TmnxMplsLspAddrType
	vRtrMplsLspToNodeId	TmnxMplsTpNodeID
	vRtrMplsLspFromNodeId	TmnxMplsTpNodeID
	vRtrMplsLspDestGlobalId	TmnxMplsTpGlobalID
	vRtrMplsLspDestTunnelNum	Unsigned32

VRtrMplsLspStatEntry
SEQUENCE
	vRtrMplsLspOctets	Counter64
	vRtrMplsLspPackets	Counter64
	vRtrMplsLspAge	TimeInterval
	vRtrMplsLspTimeUp	TimeInterval
	vRtrMplsLspTimeDown	TimeInterval
	vRtrMplsLspPrimaryTimeUp	TimeInterval
	vRtrMplsLspTransitions	Counter32
	vRtrMplsLspLastTransition	TimeInterval
	vRtrMplsLspPathChanges	Counter32
	vRtrMplsLspLastPathChange	TimeInterval
	vRtrMplsLspConfiguredPaths	Integer32
	vRtrMplsLspStandbyPaths	Integer32
	vRtrMplsLspOperationalPaths	Integer32
	vRtrMplsLspConfP2mpInstances	Gauge32

VRtrMplsLspPathEntry
SEQUENCE
	vRtrMplsLspPathRowStatus	RowStatus
	vRtrMplsLspPathLastChange	TimeStamp
	vRtrMplsLspPathType	INTEGER
	vRtrMplsLspPathCos	INTEGER
	vRtrMplsLspPathProperties	BITS
	vRtrMplsLspPathBandwidth	Integer32
	vRtrMplsLspPathBwProtect	TruthValue
	vRtrMplsLspPathState	INTEGER
	vRtrMplsLspPathPreference	INTEGER
	vRtrMplsLspPathCosSource	TruthValue
	vRtrMplsLspPathClassOfService	TNamedItemOrEmpty
	vRtrMplsLspPathSetupPriority	Unsigned32
	vRtrMplsLspPathHoldPriority	Unsigned32
	vRtrMplsLspPathRecord	INTEGER
	vRtrMplsLspPathHopLimit	Unsigned32
	vRtrMplsLspPathSharing	TruthValue
	vRtrMplsLspPathAdminState	TmnxAdminState
	vRtrMplsLspPathOperState	TmnxOperState
	vRtrMplsLspPathInheritance	Unsigned32
	vRtrMplsLspPathLspId	MplsLSPID
	vRtrMplsLspPathRetryTimeRemaining	Unsigned32
	vRtrMplsLspPathTunnelARHopListIndex	Integer32
	vRtrMplsLspPathNegotiatedMTU	Unsigned32
	vRtrMplsLspPathFailCode	TmnxMplsLspFailCode
	vRtrMplsLspPathFailNodeAddr	IpAddress
	vRtrMplsLspPathAdminGroupInclude	Unsigned32
	vRtrMplsLspPathAdminGroupExclude	Unsigned32
	vRtrMplsLspPathAdaptive	TruthValue
	vRtrMplsLspPathOptimizeTimer	Unsigned32
	vRtrMplsLspPathNextOptimize	Unsigned32
	vRtrMplsLspPathOperBandwidth	Integer32
	vRtrMplsLspPathMBBState	INTEGER
	vRtrMplsLspPathResignal	TmnxActionType
	vRtrMplsLspPathTunnelCRHopListIndex	Integer32
	vRtrMplsLspPathOperMTU	Unsigned32
	vRtrMplsLspPathRecordLabel	INTEGER
	vRtrMplsLspPathSrlg	TruthValue
	vRtrMplsLspPathSrlgDisjoint	TruthValue
	vRtrMplsLspPathLastResigAttempt	TimeStamp
	vRtrMplsLspPathMetric	Unsigned32
	vRtrMplsLspPathLastMBBType	TmnxMplsMBBType
	vRtrMplsLspPathLastMBBEnd	TimeStamp
	vRtrMplsLspPathLastMBBMetric	Unsigned32
	vRtrMplsLspPathLastMBBState	INTEGER
	vRtrMplsLspPathMBBTypeInProg	TmnxMplsMBBType
	vRtrMplsLspPathMBBStarted	TimeStamp
	vRtrMplsLspPathMBBNextRetry	Unsigned32
	vRtrMplsLspPathMBBRetryAttempts	Unsigned32
	vRtrMplsLspPathMBBFailCode	TmnxMplsLspFailCode
	vRtrMplsLspPathMBBFailNodeArType	InetAddressType
	vRtrMplsLspPathMBBFailNodeAddr	InetAddress
	vRtrMplsLspPathClassType	TmnxRsvpDSTEClassType
	vRtrMplsLspPathOperMetric	Unsigned32
	vRtrMplsLspPathResignalEligible	TruthValue
	vRtrMplsLspPathIsFastRetry	TruthValue
	vRtrMplsLspPathBackupCT	Integer32
	vRtrMplsLspPathMainCTRetryRem	Unsigned32
	vRtrMplsLspPathOperCT	Integer32
	vRtrMplsLspPathNewPathIndex	MplsTunnelIndex
	vRtrMplsLspPathMBBMainCTRetryRem	Unsigned32
	vRtrMplsLspPathSigBWMBBInProg	Unsigned32
	vRtrMplsLspPathSigBWLastMBB	Unsigned32
	vRtrMplsLspPathActiveByManual	INTEGER
	vRtrMplsLspPathTimeoutIn	Unsigned32
	vRtrMplsLspPathMBBTimeoutIn	Unsigned32

VRtrMplsLspPathStatEntry
SEQUENCE
	vRtrMplsLspPathTimeUp	TimeInterval
	vRtrMplsLspPathTimeDown	TimeInterval
	vRtrMplsLspPathRetryAttempts	Unsigned32
	vRtrMplsLspPathTransitionCount	Counter32
	vRtrMplsLspPathCspfQueries	Counter32

VRtrMplsXCEntry
SEQUENCE
	vRtrMplsXCIndex	Integer32
	vRtrMplsInSegmentIfIndex	InterfaceIndexOrZero
	vRtrMplsInSegmentLabel	MplsLabel
	vRtrMplsOutSegmentIndex	Integer32
	vRtrMplsERHopTunnelIndex	Integer32
	vRtrMplsARHopTunnelIndex	Integer32
	vRtrMplsRsvpSessionIndex	Unsigned32
	vRtrMplsXCFailCode	TmnxMplsLspFailCode
	vRtrMplsXCCHopTableIndex	Integer32

VRtrMplsGeneralEntry
SEQUENCE
	vRtrMplsGeneralLastChange	TimeStamp
	vRtrMplsGeneralAdminState	TmnxAdminState
	vRtrMplsGeneralOperState	TmnxOperState
	vRtrMplsGeneralPropagateTtl	TruthValue
	vRtrMplsGeneralTE	INTEGER
	vRtrMplsGeneralNewLspIndex	TestAndIncr
	vRtrMplsGeneralOptimizeTimer	Unsigned32
	vRtrMplsGeneralFRObject	TruthValue
	vRtrMplsGeneralResignalTimer	Unsigned32
	vRtrMplsGeneralHoldTimer	Unsigned32
	vRtrMplsGeneralDynamicBypass	TruthValue
	vRtrMplsGeneralNextResignal	Unsigned32
	vRtrMplsGeneralOperDownReason	TmnxMplsOperDownReasonCode
	vRtrMplsGeneralSrlgFrr	TruthValue
	vRtrMplsGeneralSrlgFrrStrict	TruthValue
	vRtrMplsGeneralNewP2mpInstIndex	TestAndIncr
	vRtrMplsGeneralLeastFillMinThd	Unsigned32
	vRtrMplsGenLeastFillReoptiThd	Unsigned32
	vRtrMplsGeneralUseSrlgDB	TruthValue
	vRtrMplsGeneralP2mpResigTimer	Unsigned32
	vRtrMplsGeneralP2mpNextResignal	Unsigned32
	vRtrMplsGeneralSecFastRetryTimer	Unsigned32
	vRtrMplsGeneralShortTTLPropLocal	TruthValue
	vRtrMplsGeneralShortTTLPropTrans	TruthValue
	vRtrMplsGeneralStaticLspFRTimer	Unsigned32
	vRtrMplsGeneralAutoBWDefSampMul	Unsigned32
	vRtrMplsGeneralAutoBWDefAdjMul	Unsigned32
	vRtrMplsGeneralExpBackoffRetry	TruthValue
	vRtrMplsGeneralCspfOnLooseHop	TruthValue
	vRtrMplsGeneralP2PMaxByPassAssoc	Unsigned32
	vRtrMplsGenP2pActPathFastRetry	Unsigned32
	vRtrMplsGenP2mpS2lFastRetry	Unsigned32
	vRtrMplsGenLspInitRetryTimeout	Unsigned32
	vRtrMplsLoggerEventBundling	TruthValue
	vRtrMplsGenIssuMplsLockdown	TruthValue

VRtrMplsGeneralStatEntry
SEQUENCE
	vRtrMplsGeneralStaticLspOriginate	Gauge32
	vRtrMplsGeneralStaticLspTransit	Gauge32
	vRtrMplsGeneralStaticLspTerminate	Gauge32
	vRtrMplsGeneralDynamicLspOriginate	Gauge32
	vRtrMplsGeneralDynamicLspTransit	Gauge32
	vRtrMplsGeneralDynamicLspTerminate	Gauge32
	vRtrMplsGeneralDetourLspOriginate	Gauge32
	vRtrMplsGeneralDetourLspTransit	Gauge32
	vRtrMplsGeneralDetourLspTerminate	Gauge32
	vRtrMplsGeneralS2lOriginate	Gauge32
	vRtrMplsGeneralS2lTransit	Gauge32
	vRtrMplsGeneralS2lTerminate	Gauge32
	vRtrMplsGeneralLspEgrStatCount	Counter32
	vRtrMplsGeneralLspIgrStatCount	Counter32
	vRtrMplsGenMplsTpLspOriginate	Gauge32
	vRtrMplsGenMplsTpLspTransit	Gauge32
	vRtrMplsGenMplsTpLspTerminate	Gauge32
	vRtrMplsGenMplsTpOrigPathInst	Gauge32
	vRtrMplsGenMplsTpTranPathInst	Gauge32
	vRtrMplsGenMplsTpTermPathInst	Gauge32

VRtrMplsIfEntry
SEQUENCE
	vRtrMplsIfAdminState	TmnxAdminState
	vRtrMplsIfOperState	TmnxOperState
	vRtrMplsIfAdminGroup	Unsigned32
	vRtrMplsIfTeMetric	Unsigned32

VRtrMplsIfStatEntry
SEQUENCE
	vRtrMplsIfTxPktCount	Counter64
	vRtrMplsIfRxPktCount	Counter64
	vRtrMplsIfTxOctetCount	Counter64
	vRtrMplsIfRxOctetCount	Counter64

VRtrMplsTunnelARHopEntry
SEQUENCE
	vRtrMplsTunnelARHopProtection	BITS
	vRtrMplsTunnelARHopRecordLabel	MplsLabel
	vRtrMplsTunnelARHopRouterId	IpAddress

VRtrMplsTunnelCHopEntry
SEQUENCE
	vRtrMplsTunnelCHopListIndex	Integer32
	vRtrMplsTunnelCHopIndex	Integer32
	vRtrMplsTunnelCHopAddrType	INTEGER
	vRtrMplsTunnelCHopIpv4Addr	IpAddress
	vRtrMplsTunnelCHopIpv4PrefixLen	INTEGER
	vRtrMplsTunnelCHopIpv6Addr	InetAddressIPv6
	vRtrMplsTunnelCHopIpv6PrefixLen	INTEGER
	vRtrMplsTunnelCHopAsNumber	INTEGER
	vRtrMplsTunnelCHopLspId	MplsLSPID
	vRtrMplsTunnelCHopStrictOrLoose	INTEGER

VRtrMplsAdminGroupEntry
SEQUENCE
	vRtrMplsAdminGroupName	TNamedItem
	vRtrMplsAdminGroupRowStatus	RowStatus
	vRtrMplsAdminGroupValue	Integer32

VRtrMplsFSGroupEntry
SEQUENCE
	vRtrMplsFSGroupName	TNamedItem
	vRtrMplsFSGroupRowStatus	RowStatus
	vRtrMplsFSGroupCost	Unsigned32

VRtrMplsFSGroupParamsEntry
SEQUENCE
	vRtrMplsFSGroupParamsFromAddr	IpAddress
	vRtrMplsFSGroupParamsToAddr	IpAddress
	vRtrMplsFSGroupParamsRowStatus	RowStatus

VRtrMplsLabelRangeEntry
SEQUENCE
	vRtrMplsLabelType	INTEGER
	vRtrMplsLabelRangeMin	Unsigned32
	vRtrMplsLabelRangeMax	Unsigned32
	vRtrMplsLabelRangeAging	Unsigned32
	vRtrMplsLabelRangeAvailable	Unsigned32

VRtrMplsStaticLSPLabelEntry
SEQUENCE
	vRtrMplsStaticLSPLabel	MplsLabel
	vRtrMplsStaticLSPLabelOwner	TmnxMplsLabelOwner

VRtrMplsStaticSvcLabelEntry
SEQUENCE
	vRtrMplsStaticSvcLabel	MplsLabel
	vRtrMplsStaticSvcLabelOwner	TmnxMplsLabelOwner

VRtrMplsSrlgGrpEntry
SEQUENCE
	vRtrMplsSrlgGrpName	TNamedItem
	vRtrMplsSrlgGrpRowStatus	RowStatus
	vRtrMplsSrlgGrpLastChanged	TimeStamp
	vRtrMplsSrlgGrpValue	Unsigned32

VRtrMplsIfSrlgGrpEntry
SEQUENCE
	vRtrMplsIfSrlgGrpName	TNamedItem
	vRtrMplsIfSrlgGrpRowStatus	RowStatus
	vRtrMplsIfSrlgGrpLastChanged	TimeStamp

VRtrMplsP2mpInstEntry
SEQUENCE
	vRtrMplsP2mpInstIndex	TmnxVRtrMplsLspID
	vRtrMplsP2mpInstRowStatus	RowStatus
	vRtrMplsP2mpInstLastChange	TimeStamp
	vRtrMplsP2mpInstName	TNamedItemOrEmpty
	vRtrMplsP2mpInstType	INTEGER
	vRtrMplsP2mpInstProperties	BITS
	vRtrMplsP2mpInstBandwidth	Unsigned32
	vRtrMplsP2mpInstState	INTEGER
	vRtrMplsP2mpInstSetupPriority	Unsigned32
	vRtrMplsP2mpInstHoldPriority	Unsigned32
	vRtrMplsP2mpInstRecord	TruthValue
	vRtrMplsP2mpInstHopLimit	Unsigned32
	vRtrMplsP2mpInstAdminState	TmnxAdminState
	vRtrMplsP2mpInstOperState	TmnxOperState
	vRtrMplsP2mpInstInheritance	Unsigned32
	vRtrMplsP2mpInstLspId	MplsLSPID
	vRtrMplsP2mpInstNegotiatedMTU	Unsigned32
	vRtrMplsP2mpInstFailCode	TmnxMplsLspFailCode
	vRtrMplsP2mpInstFailNodeArType	InetAddressType
	vRtrMplsP2mpInstFailNodeAddr	InetAddress
	vRtrMplsP2mpInstAdminGrpInclude	Unsigned32
	vRtrMplsP2mpInstAdminGrpExclude	Unsigned32
	vRtrMplsP2mpInstAdaptive	TruthValue
	vRtrMplsP2mpInstOperBandwidth	Integer32
	vRtrMplsP2mpInstResignal	TmnxActionType
	vRtrMplsP2mpInstOperMTU	Unsigned32
	vRtrMplsP2mpInstRecordLabel	INTEGER
	vRtrMplsP2mpInstLastResigAttpt	TimeStamp
	vRtrMplsP2mpInstMetric	Unsigned32
	vRtrMplsP2mpInstLastMBBType	TmnxMplsMBBType
	vRtrMplsP2mpInstLastMBBEnd	TimeStamp
	vRtrMplsP2mpInstLastMBBMetric	Unsigned32
	vRtrMplsP2mpInstLastMBBState	INTEGER
	vRtrMplsP2mpInstMBBTypeInProg	TmnxMplsMBBType
	vRtrMplsP2mpInstMBBStarted	TimeStamp
	vRtrMplsP2mpInstMBBNextRetry	Unsigned32
	vRtrMplsP2mpInstMBBRetryAttpts	Unsigned32
	vRtrMplsP2mpInstMBBFailCode	TmnxMplsLspFailCode
	vRtrMplsP2mpInstMBBFailNodeType	InetAddressType
	vRtrMplsP2mpInstMBBFailNodeAddr	InetAddress

VRtrMplsP2mpInstStatEntry
SEQUENCE
	vRtrMplsP2mpInstStatS2lChanges	Counter32
	vRtrMplsP2mpInstStatLastS2lChange	TimeInterval
	vRtrMplsP2mpInstStatConfiguredS2ls	Gauge32
	vRtrMplsP2mpInstStatOperationalS2ls	Gauge32
	vRtrMplsP2mpInstStatLastS2lTimeUp	TimeInterval
	vRtrMplsP2mpInstStatLastS2lTimeDown	TimeInterval
	vRtrMplsP2mpInstStatTimeUp	TimeInterval
	vRtrMplsP2mpInstStatTimeDown	TimeInterval
	vRtrMplsP2mpInstStatTransitions	Counter32
	vRtrMplsP2mpInstStatLastTrans	TimeInterval

VRtrMplsS2lSubLspEntry
SEQUENCE
	vRtrMplsS2lSubLspDstAddrType	InetAddressType
	vRtrMplsS2lSubLspDstAddr	InetAddress
	vRtrMplsS2lSubLspRowStatus	RowStatus
	vRtrMplsS2lSubLspLastChange	TimeStamp
	vRtrMplsS2lSubLspType	INTEGER
	vRtrMplsS2lSubLspProperties	BITS
	vRtrMplsS2lSubLspState	INTEGER
	vRtrMplsS2lSubLspAdminState	TmnxAdminState
	vRtrMplsS2lSubLspOperState	TmnxOperState
	vRtrMplsS2lSubGroupId	Unsigned32
	vRtrMplsS2lSubLspId	MplsLSPID
	vRtrMplsS2lSubLspRetryTimeRemain	Unsigned32
	vRtrMplsS2lSubLspTunARHopLtIndex	Integer32
	vRtrMplsS2lSubLspNegotiatedMTU	Unsigned32
	vRtrMplsS2lSubLspFailCode	TmnxMplsLspFailCode
	vRtrMplsS2lSubLspFailNodeArType	InetAddressType
	vRtrMplsS2lSubLspFailNodeAddr	InetAddress
	vRtrMplsS2lSubLspOperBandwidth	Integer32
	vRtrMplsS2lSubLspTunCRHopLtIndex	Integer32
	vRtrMplsS2lSubLspOperMTU	Unsigned32
	vRtrMplsS2lSubLspLastResigAttpt	TimeStamp
	vRtrMplsS2lSubLspLastMBBType	TmnxMplsMBBType
	vRtrMplsS2lSubLspLastMBBEnd	TimeStamp
	vRtrMplsS2lSubLspLastMBBMetric	Unsigned32
	vRtrMplsS2lSubLspLastMBBState	INTEGER
	vRtrMplsS2lSubLspMBBTypeInProg	TmnxMplsMBBType
	vRtrMplsS2lSubLspMBBStarted	TimeStamp
	vRtrMplsS2lSubLspMBBNextRetry	Unsigned32
	vRtrMplsS2lSubLspMBBRetryAttpts	Unsigned32
	vRtrMplsS2lSubLspMBBFailCode	TmnxMplsLspFailCode
	vRtrMplsS2lSubLspMBBFailNodeType	InetAddressType
	vRtrMplsS2lSubLspMBBFailNodeAddr	InetAddress
	vRtrMplsS2lSubLspUpTime	TimeStamp
	vRtrMplsS2lSubLspDownTime	TimeStamp
	vRtrMplsS2lSubLspIsFastRetry	TruthValue
	vRtrMplsS2lSubLspTimeoutIn	Unsigned32
	vRtrMplsS2lSubLspMBBTimeoutIn	Unsigned32

VRtrMplsS2lSubLspStatEntry
SEQUENCE
	vRtrMplsS2lSubLspTimeUp	TimeInterval
	vRtrMplsS2lSubLspTimeDown	TimeInterval
	vRtrMplsS2lSubLspRetryAttempts	Counter32
	vRtrMplsS2lSubLspTransitionCount	Counter32
	vRtrMplsS2lSubLspCspfQueries	Counter32

VRtrMplsSrlgDBRtrIdEntry
SEQUENCE
	vRtrMplsSrlgDBRtrIdRouterID	TmnxMplsRouterId
	vRtrMplsSrlgDBRtrIdRowStatus	RowStatus
	vRtrMplsSrlgDBRtrIdAdminState	TmnxAdminState
	vRtrMplsSrlgDBRtrIdLastChanged	TimeStamp

VRtrMplsSrlgDBIfEntry
SEQUENCE
	vRtrMplsSrlgDBIfIntIpAddrType	InetAddressType
	vRtrMplsSrlgDBIfIntIpAddr	InetAddress
	vRtrMplsSrlgDBIfSrlgGroupName	TNamedItem
	vRtrMplsSrlgDBIfRowStatus	RowStatus
	vRtrMplsSrlgDBIfLastChanged	TimeStamp

VRtrMplsInSegmentEntry
SEQUENCE
	vRtrMplsInSegmentNumS2ls	Unsigned32

VRtrMplsOutSegmentEntry
SEQUENCE
	vRtrMplsOutSegmentNumS2ls	Unsigned32

VRtrMplsLspStatsEntry
SEQUENCE
	vRtrMplsLspStatsType	INTEGER
	vRtrMplsLspStatsSenderAddrType	InetAddressType
	vRtrMplsLspStatsSenderAddr	InetAddress
	vRtrMplsLspStatsLspName	TNamedItem
	vRtrMplsLspStatsRowStatus	RowStatus
	vRtrMplsLspStatsLastChanged	TimeStamp
	vRtrMplsLspStatsCollectStats	TruthValue
	vRtrMplsLspStatsAccntingPolicy	Unsigned32
	vRtrMplsLspStatsAdminState	TmnxAdminState

VRtrMplsLspStatisticsEntry
SEQUENCE
	vRtrMplsInProfilePktsFc0	Counter64
	vRtrMplsInProfilePktsFc0Low32	Counter32
	vRtrMplsInProfilePktsFc0High32	Counter32
	vRtrMplsInProfilePktsFc1	Counter64
	vRtrMplsInProfilePktsFc1Low32	Counter32
	vRtrMplsInProfilePktsFc1High32	Counter32
	vRtrMplsInProfilePktsFc2	Counter64
	vRtrMplsInProfilePktsFc2Low32	Counter32
	vRtrMplsInProfilePktsFc2High32	Counter32
	vRtrMplsInProfilePktsFc3	Counter64
	vRtrMplsInProfilePktsFc3Low32	Counter32
	vRtrMplsInProfilePktsFc3High32	Counter32
	vRtrMplsInProfilePktsFc4	Counter64
	vRtrMplsInProfilePktsFc4Low32	Counter32
	vRtrMplsInProfilePktsFc4High32	Counter32
	vRtrMplsInProfilePktsFc5	Counter64
	vRtrMplsInProfilePktsFc5Low32	Counter32
	vRtrMplsInProfilePktsFc5High32	Counter32
	vRtrMplsInProfilePktsFc6	Counter64
	vRtrMplsInProfilePktsFc6Low32	Counter32
	vRtrMplsInProfilePktsFc6High32	Counter32
	vRtrMplsInProfilePktsFc7	Counter64
	vRtrMplsInProfilePktsFc7Low32	Counter32
	vRtrMplsInProfilePktsFc7High32	Counter32
	vRtrMplsInProfileOctetsFc0	Counter64
	vRtrMplsInProfileOctetsFc0Low32	Counter32
	vRtrMplsInProfileOctetsFc0High32	Counter32
	vRtrMplsInProfileOctetsFc1	Counter64
	vRtrMplsInProfileOctetsFc1Low32	Counter32
	vRtrMplsInProfileOctetsFc1High32	Counter32
	vRtrMplsInProfileOctetsFc2	Counter64
	vRtrMplsInProfileOctetsFc2Low32	Counter32
	vRtrMplsInProfileOctetsFc2High32	Counter32
	vRtrMplsInProfileOctetsFc3	Counter64
	vRtrMplsInProfileOctetsFc3Low32	Counter32
	vRtrMplsInProfileOctetsFc3High32	Counter32
	vRtrMplsInProfileOctetsFc4	Counter64
	vRtrMplsInProfileOctetsFc4Low32	Counter32
	vRtrMplsInProfileOctetsFc4High32	Counter32
	vRtrMplsInProfileOctetsFc5	Counter64
	vRtrMplsInProfileOctetsFc5Low32	Counter32
	vRtrMplsInProfileOctetsFc5High32	Counter32
	vRtrMplsInProfileOctetsFc6	Counter64
	vRtrMplsInProfileOctetsFc6Low32	Counter32
	vRtrMplsInProfileOctetsFc6High32	Counter32
	vRtrMplsInProfileOctetsFc7	Counter64
	vRtrMplsInProfileOctetsFc7Low32	Counter32
	vRtrMplsInProfileOctetsFc7High32	Counter32
	vRtrMplsOutOfProfPktsFc0	Counter64
	vRtrMplsOutOfProfPktsFc0Low32	Counter32
	vRtrMplsOutOfProfPktsFc0High32	Counter32
	vRtrMplsOutOfProfPktsFc1	Counter64
	vRtrMplsOutOfProfPktsFc1Low32	Counter32
	vRtrMplsOutOfProfPktsFc1High32	Counter32
	vRtrMplsOutOfProfPktsFc2	Counter64
	vRtrMplsOutOfProfPktsFc2Low32	Counter32
	vRtrMplsOutOfProfPktsFc2High32	Counter32
	vRtrMplsOutOfProfPktsFc3	Counter64
	vRtrMplsOutOfProfPktsFc3Low32	Counter32
	vRtrMplsOutOfProfPktsFc3High32	Counter32
	vRtrMplsOutOfProfPktsFc4	Counter64
	vRtrMplsOutOfProfPktsFc4Low32	Counter32
	vRtrMplsOutOfProfPktsFc4High32	Counter32
	vRtrMplsOutOfProfPktsFc5	Counter64
	vRtrMplsOutOfProfPktsFc5Low32	Counter32
	vRtrMplsOutOfProfPktsFc5High32	Counter32
	vRtrMplsOutOfProfPktsFc6	Counter64
	vRtrMplsOutOfProfPktsFc6Low32	Counter32
	vRtrMplsOutOfProfPktsFc6High32	Counter32
	vRtrMplsOutOfProfPktsFc7	Counter64
	vRtrMplsOutOfProfPktsFc7Low32	Counter32
	vRtrMplsOutOfProfPktsFc7High32	Counter32
	vRtrMplsOutOfProfOctetsFc0	Counter64
	vRtrMplsOutOfProfOctetsFc0Low32	Counter32
	vRtrMplsOutOfProfOctetsFc0High32	Counter32
	vRtrMplsOutOfProfOctetsFc1	Counter64
	vRtrMplsOutOfProfOctetsFc1Low32	Counter32
	vRtrMplsOutOfProfOctetsFc1High32	Counter32
	vRtrMplsOutOfProfOctetsFc2	Counter64
	vRtrMplsOutOfProfOctetsFc2Low32	Counter32
	vRtrMplsOutOfProfOctetsFc2High32	Counter32
	vRtrMplsOutOfProfOctetsFc3	Counter64
	vRtrMplsOutOfProfOctetsFc3Low32	Counter32
	vRtrMplsOutOfProfOctetsFc3High32	Counter32
	vRtrMplsOutOfProfOctetsFc4	Counter64
	vRtrMplsOutOfProfOctetsFc4Low32	Counter32
	vRtrMplsOutOfProfOctetsFc4High32	Counter32
	vRtrMplsOutOfProfOctetsFc5	Counter64
	vRtrMplsOutOfProfOctetsFc5Low32	Counter32
	vRtrMplsOutOfProfOctetsFc5High32	Counter32
	vRtrMplsOutOfProfOctetsFc6	Counter64
	vRtrMplsOutOfProfOctetsFc6Low32	Counter32
	vRtrMplsOutOfProfOctetsFc6High32	Counter32
	vRtrMplsOutOfProfOctetsFc7	Counter64
	vRtrMplsOutOfProfOctetsFc7Low32	Counter32
	vRtrMplsOutOfProfOctetsFc7High32	Counter32
	vRtrMplsLspStatsPSBMatch	TruthValue
	vRtrMplsLspStatsTpOnly	TruthValue

VRtrMplsLspTemplateEntry
SEQUENCE
	vRtrMplsLspTemplateName	TNamedItem
	vRtrMplsLspTemplateRowStatus	RowStatus
	vRtrMplsLspTemplateLastChanged	TimeStamp
	vRtrMplsLspTemplateAdminState	TmnxAdminState
	vRtrMplsLspTemplateType	INTEGER
	vRtrMplsLspTemplateAdaptive	TruthValue
	vRtrMplsLspTemplateBandwidth	Integer32
	vRtrMplsLspTemplateCspf	TruthValue
	vRtrMplsLspTemplateDefaultPath	MplsTunnelIndex
	vRtrMplsLspTemplateAdmGrpIncl	Unsigned32
	vRtrMplsLspTemplateAdmGrpExcl	Unsigned32
	vRtrMplsLspTemplateFastReroute	TruthValue
	vRtrMplsLspTemplateFRMethod	INTEGER
	vRtrMplsLspTemplateFRHopLimit	Unsigned32
	vRtrMplsLspTemplateHopLimit	Unsigned32
	vRtrMplsLspTemplateRecord	INTEGER
	vRtrMplsLspTemplateRecordLabel	INTEGER
	vRtrMplsLspTemplateRetryLimit	Unsigned32
	vRtrMplsLspTemplateRetryTimer	Unsigned32
	vRtrMplsLspTemplateCspfTeMetric	TruthValue
	vRtrMplsLspTemplateLspCount	Gauge32
	vRtrMplsLspTemplateMvpnRefCount	Gauge32

VRtrMplsLspAutoBandwidthEntry
SEQUENCE
	vRtrMplsLspAutoBWLspName	TNamedItem
	vRtrMplsLspAutoBWLastChange	TimeStamp
	vRtrMplsLspAutoBWAdjDNPercent	Unsigned32
	vRtrMplsLspAutoBWAdjDNMbps	Unsigned32
	vRtrMplsLspAutoBWAdjMultiplier	Unsigned32
	vRtrMplsLspAutoBWAdjUPPercent	Unsigned32
	vRtrMplsLspAutoBWAdjUPMbps	Unsigned32
	vRtrMplsLspAutoBWMaxBW	Unsigned32
	vRtrMplsLspAutoBWMinBW	Unsigned32
	vRtrMplsLspAutoBWMonitorBW	TruthValue
	vRtrMplsLspAutoBWOverFlow	Unsigned32
	vRtrMplsLspAutoBWOvrFlwThreshold	Unsigned32
	vRtrMplsLspAutoBWOvrFlwBW	Unsigned32
	vRtrMplsLspAutoBWSampMultiplier	Unsigned32
	vRtrMplsLspAutoBWSampTime	Unsigned32
	vRtrMplsLspAutoBWLastAdj	TimeStamp
	vRtrMplsLspAutoBWLastAdjCause	TmnxMplsLspAutoBWLastAdjCause
	vRtrMplsLspAutoBWNextAdj	Unsigned32
	vRtrMplsLspAutoBWMaxAvgRate	Unsigned32
	vRtrMplsLspAutoBWLastAvgRate	Unsigned32
	vRtrMplsLspAutoBWInheritance	Unsigned32
	vRtrMplsLspAutoBWCurrentBW	Unsigned32
	vRtrMplsLspAutoBWAdjTime	Unsigned32
	vRtrMplsLspAutoBWOvrFlwCount	Unsigned32
	vRtrMplsLspAutoBWSampCount	Unsigned32
	vRtrMplsLspAutoBWAdjCount	Unsigned32
	vRtrMplsLspAutoBWOperState	TmnxEnabledDisabled
	vRtrMplsLspAutoBWSampInterval	Unsigned32

VRtrMplsLspPathOperEntry
SEQUENCE
	vRtrMplsLspPathOperSetupPriority	Unsigned32
	vRtrMplsLspPathOperHoldPriority	Unsigned32
	vRtrMplsLspPathOperRecord	INTEGER
	vRtrMplsLspPathOperRecordLabel	INTEGER
	vRtrMplsLspPathOperHopLimit	Unsigned32
	vRtrMplsLspPathOperAdminGrpIncl	Unsigned32
	vRtrMplsLspPathOperAdminGrExcld	Unsigned32
	vRtrMplsLspPathOperCspf	TruthValue
	vRtrMplsLspPathOperCspfToFrstLs	TruthValue
	vRtrMplsLspPathOperLeastFill	TruthValue
	vRtrMplsLspPathOperRsvpAdspec	TruthValue
	vRtrMplsLspPathOperFRNodeProtect	TruthValue
	vRtrMplsLspPathOperPropAdminGrp	TruthValue
	vRtrMplsLspPathOperFRHopLimit	Unsigned32

Defined Values

timetraMplsMIBModule		1.3.6.1.4.1.6527.1.1.3.6
This document is the SNMP MIB module to manage and provision the MPLS extensions for the Alcatel-Lucent SROS device. Copyright 2003-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY

tmnxMplsObjs		1.3.6.1.4.1.6527.3.1.2.6
OBJECT IDENTIFIER

tmnxMplsConformance		1.3.6.1.4.1.6527.3.1.1.6
OBJECT IDENTIFIER

tmnxMplsNotifyPrefix		1.3.6.1.4.1.6527.3.1.3.6
OBJECT IDENTIFIER

tmnxMplsNotifications		1.3.6.1.4.1.6527.3.1.3.6.0
OBJECT IDENTIFIER

vRtrMplsLspTable		1.3.6.1.4.1.6527.3.1.2.6.1
The vRtrMplsLspTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspEntry

vRtrMplsLspEntry		1.3.6.1.4.1.6527.3.1.2.6.1.1
Each row entry represents a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires vRtrMplsLspName to have been assigned a valid value.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspEntry

vRtrMplsLspIndex		1.3.6.1.4.1.6527.3.1.2.6.1.1.1
The unique value which identifies this Labeled Switch Path (LSP) for this virtual router in the Alcatel-Lucent SROS system. It is a unique value among entries with the same value of vRtrID.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TmnxVRtrMplsLspID

vRtrMplsLspRowStatus		1.3.6.1.4.1.6527.3.1.2.6.1.1.2
The row status used for creation, deletion, or control of vRtrMplsLspTable entries. Before the row can be placed into the 'active' state vRtrMplsLspName must have been assigned a valid value.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsLspLastChange		1.3.6.1.4.1.6527.3.1.2.6.1.1.3
The sysUpTime when this row was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspName		1.3.6.1.4.1.6527.3.1.2.6.1.1.4
Administrative name for this Labeled Switch Path. The vRtrMplsLspName must be unique within a virtual router instance. When the value of the object vRtrMplsLspType is 'p2mpAuto', LSPs are auto-created dynamically by the system using LSP template values configured in the associated row entry of vRtrMplsLspTemplateTable. For auto-created LSPs, vRtrMplsLspName can have a maximum of 64 characters which consists of vRtrMplsLspTemplateName, vRtrID and MTTM(Multicast Tunnel Table Manager)Identifier. If vRtrMplsLspType is not 'p2mpAuto', vRtrMplsLspName can have a maximum of 32 characters.
Status: current	Access: read-create
OBJECT-TYPE
	TLNamedItemOrEmpty

vRtrMplsLspAdminState		1.3.6.1.4.1.6527.3.1.2.6.1.1.5
The desired administrative state for this LSP.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsLspOperState		1.3.6.1.4.1.6527.3.1.2.6.1.1.6
The current operational state of this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrMplsLspFromAddr		1.3.6.1.4.1.6527.3.1.2.6.1.1.7
Source IP address of this LSP. If vRtrMplsLspFromAddr has not been explicitly set, the system IP address will be used.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrMplsLspToAddr		1.3.6.1.4.1.6527.3.1.2.6.1.1.8
Destination IP address of this LSP. This LSP will not be signaled until vRtrMplsLspToAddr is explicitly set.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrMplsLspType		1.3.6.1.4.1.6527.3.1.2.6.1.1.9
The vRtrMplsLspType object is an enumerated value that indicates whether the label value is statically or dynamically assigned or whether the LSP will be used exclusively for bypass protection. The value 'p2mpLsp' will be used to indicate point to multipoint LSPs used for multicast traffic. When the value of the vRtrMplsLspType is 'p2mpAuto', it specifies that the LSP is auto-created dynamically by the system and the row entry is dynamically created by the system using LSP Template values configured in the associated row entry of vRtrMplsLspTemplateTable. The value 'mplsTp' specifies that the LSP is an MPLS-TP Static LSP. A 'wrongValue' error is returned if an attempt is made to set an object in the row entry where the value of vRtrMplsLspType is 'p2mpAuto'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(1), dynamic(2), static(3), bypassOnly(4), p2mpLsp(5), p2mpAuto(6), mplsTp(7)

vRtrMplsLspOutSegIndx		1.3.6.1.4.1.6527.3.1.2.6.1.1.10
The vRtrMplsLspOutSegIndx is the index value of the entry in the mplsOutSegmentTable associated with this vRtrMplsLspEntry when vRtrMplsLspType is 'static'. If vRtrMplsLspType is 'dynamic', the value of this object will be zero (0).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..2147483647

vRtrMplsLspRetryTimer		1.3.6.1.4.1.6527.3.1.2.6.1.1.11
The value of vRtrMplsLspRetryTimer specifies the time in seconds the software will wait before attempting the establish the failed LSP.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..600

vRtrMplsLspRetryLimit		1.3.6.1.4.1.6527.3.1.2.6.1.1.12
The value of vRtrMplsLspRetryLimit specifies the number of attempts the software should make to reestablish a failed LSP before the LSP is disabled. A value of 0 indicates that an infinite number of retry attempts should be made.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10000

vRtrMplsLspMetric		1.3.6.1.4.1.6527.3.1.2.6.1.1.13
The value of vRtrMplsLspMetric specifies the metric for this LSP which is used to select an LSP among a set of LSPs which are destined to the same egress 7x50 router. The LSP with the lowest metric will be selected. In LDP-over-RSVP, LDP performs a lookup in the Routing Table Manager (RTM) which provides the next hop to the destination PE and the advertising router (ABR or destination PE itself). If the advertising router matches the targeted LDP peer, LDP then performs a second lookup for the advertising router in the Tunnel Table Manager (TTM). This lookup returns the best RSVP LSP to use to forward packets for an LDP FEC learned through the targeted LDP session. The lookup returns the LSP with the lowest metric. If multiple LSPs have the same metric, then the result of the lookup will be to select the first one available in the TTM.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

vRtrMplsLspDecrementTtl		1.3.6.1.4.1.6527.3.1.2.6.1.1.14
When the value of vRtrMplsLspDecrementTtl is 'true', the ingress ESR writes the TTL of the IP packet into the label and each transit ESR decrements the TTL in the label. At the egress ESR the TTL value from the label is written into the IP packet. When the value of vRtrMplsLspDecrementTtl is 'false', the ingress ESR ignores the IP packet TTL and writes the value of 255 into the label; and the egress ESR does not write the label's TTL into the IP packet.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspCspf		1.3.6.1.4.1.6527.3.1.2.6.1.1.15
When the value of vRtrMplsLspCspf is 'true', CSPF computation for constrained-path LSP is enabled. When the value of vRtrMplsLspCspf is 'false' CSPF computation is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspFastReroute		1.3.6.1.4.1.6527.3.1.2.6.1.1.16
When the value of vRtrMplsLspFastReroute is 'true', fast reroute is enabled. A pre-computed detour LSP is created from each node in the primary path of this LSP. In case of a failure of a link or LSP between two nodes, traffic is immediately rerouted on the pre-computed detour LSP thus avoiding packet loss. Each node along the primary path of the LSP tries to establish a detour LSP as follows: Each upstream node will setup a detour LSP that avoids only the immediate downstream node and merges back onto the actual path of the LSP as soon as possible. The detour LSP may take one or more hops (upto the value of vRtrMplsLspFRHopLimit) before merging back onto the main LSP path. When the upstream node detects a downstream link or node failure, it immediately send traffic for that LSP on the detour path and at the same time signals back to the ingress ESR about the failure. Fast reroute applies only to the primary path of this LSP. No configuration is required on the transit hops of the LSP. The ingress ESR will signal all intermediate ESRs using RSVP to setup their detours. When the value of vRtrMplsLspFastReroute is 'false', fast rerouting is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspFRHopLimit		1.3.6.1.4.1.6527.3.1.2.6.1.1.17
The value of vRtrMplsLspFRHopLimit specifies the total number of hops a detour LSP can take before merging back onto the main LSP path.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

vRtrMplsLspFRBandwidth		1.3.6.1.4.1.6527.3.1.2.6.1.1.18
The value of vRtrMplsLspFRBandwidth specified the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the detour LSP. A value of zero (0) indicates that no bandwidth is reserved.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspClassOfService		1.3.6.1.4.1.6527.3.1.2.6.1.1.19
The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspClassOfService. The EXP bits in the MPLS header are set based on the global mapping table that specified the mapping between the forwarding class and the EXP bits. When class of service is specified, all packets will be marked with the same EXP bits that match the vRtrMplsLspClassOfService name in the mapping table. An empty string, ''H, specifies no class of service. Packets are assigned EXP bits based on the same mapping table, however each packet is marked with EXP bits based on the forwarding class from which it is serviced. When the value of vRtrMplsLspPathCosSource is set to 'inherit', the value of vRtrMplsLspClassOfService is applied to that specific LSP/path.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrMplsLspSetupPriority		1.3.6.1.4.1.6527.3.1.2.6.1.1.20
The value of vRtrMplsLspSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the value of vRtrMplsLspPathSetupPriority is set to '-1', the value of vRtrMplsLspSetupPriority is applied to that specific LSP/path.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsLspHoldPriority		1.3.6.1.4.1.6527.3.1.2.6.1.1.21
The value of vRtrMplsLspHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the value of vRtrMplsLspPathHoldPriority is set to '-1', the value of vRtrMplsLspHoldPriority is applied to that specific LSP/path.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsLspRecord		1.3.6.1.4.1.6527.3.1.2.6.1.1.22
When the value of vRtrMplsLspRecord is 'true', recording of all the hops that a LSP traverses is enabled. When the value of vRtrMplsLspRecord is 'false, recording of all the hops that a LSP traverses is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspPreference		1.3.6.1.4.1.6527.3.1.2.6.1.1.23
The value of vRtrMplsLspPreference specifies the preference for the LSP. This value is used for load balancing between multiple LSPs that exist between the same ingress and egress routers. By default, traffic is load balanced among the LSPs, since all LSPs have the same preference. To prefer one LSP over another, change the preference value for that LSP. The LSP with the lowest preference is used.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..255

vRtrMplsLspBandwidth		1.3.6.1.4.1.6527.3.1.2.6.1.1.24
The value of vRtrMplsLspBandwidth specifies the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the LSP. A value of zero (0) indicates that no bandwidth is reserved. When vRtrMplsLspPathBandwidth is set to -1, the value of vRtrMplsLspBandwidth is applied to that specific LSP/path.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

vRtrMplsLspBwProtect		1.3.6.1.4.1.6527.3.1.2.6.1.1.25
When vRtrMplsLspBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will be used for EF services where customers need guaranteed bandwidth. It is expected that multiple EF services will be assigned to a single LSP. When bandwidth protection is enabled on an LSP, each time this LSP is used for a certain service the bandwidth allocated on that service is deducted from the bandwidth reserved for the LSP. Once the bandwidth is exhausted on the LSP, the ESR will provide feedback to the provider indicating that this LSP has exhausted its resources.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspHopLimit		1.3.6.1.4.1.6527.3.1.2.6.1.1.26
The value of vRtrMplsLspHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egress ESRs. A LSP will not be setup if the hop limit is exceeded. When the value of vRtrMplsLspPathHopLimit is set to zero (0), the value of vRtrMplsLspHopLimit is applied to that specific LSP/path.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	2..255

vRtrMplsLspNegotiatedMTU		1.3.6.1.4.1.6527.3.1.2.6.1.1.27
The value of vRtrMplsLspNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during LSP establishment.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspRsvpResvStyle		1.3.6.1.4.1.6527.3.1.2.6.1.1.28
The value of vRtrMplsLspRsvpResvStyle specifies the reservation style for RSVP. The reservation style can be set to 'Shared- Explicit' (se) or 'Fixed-Filter' (ff).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	se(1), ff(2)

vRtrMplsLspRsvpAdspec		1.3.6.1.4.1.6527.3.1.2.6.1.1.29
When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC object will be included in RSVP messages. When the value of vRtrMplsLspRsvpAdspec is 'false', the ADSPEC object will not be included in RSVP messages.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspFRMethod		1.3.6.1.4.1.6527.3.1.2.6.1.1.30
The value of vRtrMplsLspFRMethod specifies the fast reroute method used. In the 'One-to-one Backup' method, a backup LSP is established which will intersect the original LSP somewhere downstream of the point of link or node failure. For each LSP that is backed up, a separate backup LSP is established. In the 'Facility Backup' method, instead of creating a separate LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. Such an LSP tunnel is called a 'bypass tunnel'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	oneToOneBackup(1), facilityBackup(2)

vRtrMplsLspFRNodeProtect		1.3.6.1.4.1.6527.3.1.2.6.1.1.31
Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables node protection i.e. protection against the failure of a node on the LSP. Setting the value to 'false' disables node protection.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspAdminGroupInclude		1.3.6.1.4.1.6527.3.1.2.6.1.1.32
The value of vRtrMplsLspAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when this LSP is setup. If bit 'n' is set, then the admin group with value 'n' is included for this LSP. This implies that each link that this LSP goes through must be associated with at least one of the admin groups in the include list. By default, all admin groups are in the include list.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAdminGroupExclude		1.3.6.1.4.1.6527.3.1.2.6.1.1.33
The value of vRtrMplsLspAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when this LSP is setup. If bit 'n' is set, then the admin group with value 'n' is excluded for this LSP. This implies that each link that this LSP goes through must not be associated with any of the admin groups in the exclude list. By default, no admin groups are in the exclude list.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAdaptive		1.3.6.1.4.1.6527.3.1.2.6.1.1.34
Setting the value of vRtrMplsLspAdaptive to 'true' enables make-before-break functionality for the LSP. When the attributes of an already established LSP are changed, either through manual configuration or due to a change in network topology, make-before-break functionality ensures that the resources of the existing LSP will not be released until a new path (with the same LSP Id) has been established and traffic flowing over the existing path is seamlessly transferred to the new path. Setting the value to 'false' disables make-before-break functionality.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspInheritance		1.3.6.1.4.1.6527.3.1.2.6.1.1.35
For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrMplsGeneralTable, there is bit within vRtrMplsLspInheritance that controls whether to inherit the operational value of the object or use the administratively set value. Non mask bits will always have value of zero. This object is a bit-mask, with the following positions: vRtrMplsLspOptimizeTimer 0x1 vRtrMplsLspFRObject 0x2 vRtrMplsLspHoldTimer 0x4 vRtrMplsLspDestGlobalId 0x8 vRtrMplsLspDestTunnelNum 0x10 vRtrMplsLspFromNodeId 0x20 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsGeneralTable.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspOptimizeTimer		1.3.6.1.4.1.6527.3.1.2.6.1.1.36
The value of vRtrMplsLspOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSP. When CSPF is enabled, changes in the network topology may cause the existing path of a loose-hop LSP to become sub-optimal. Such LSPs can be re-optimized and re-routed through more optimal paths by recalculating the path for the LSP at periodic intervals. This interval is controlled by the optimize timer. A value of 0 indicates that optimization has been disabled. When the vRtrMplsLspOptimizeTimer bit in vRtrMplsLspInheritance is cleared (0), the value returned in the GET request is inherited from vRtrMplsGeneralOptimizeTimer.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

vRtrMplsLspOperFastReroute		1.3.6.1.4.1.6527.3.1.2.6.1.1.37
The value of vRtrMplsLspOperFastReroute specifies whether the operational LSP has fast reroute enabled or disabled. When make-before-break functionality for the LSP is enabled and if the fast reroute setting is changed, the resources for the existing LSP will not be released until a new path with the new attribute settings has been established. While a new path is being signaled, the administrative value and the operational values of fast reroute setting for the LSP may differ. The value of vRtrMplsLspFastReroute specifies the setting used for the new LSP path trying to be established whereas the value of vRtrMplsLspOperFastReroute specifies the setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspFRObject		1.3.6.1.4.1.6527.3.1.2.6.1.1.38
The value of vRtrMplsLspFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or without the fast reroute object. The value of vRtrMplsLspFRObject is ignored if fast reroute is disabled for the LSP or if the LSP is using 'One-to-one Backup'. When the vRtrMplsLspFRObject bit in vRtrMplsLspInheritance is cleared (0), the value returned in the GET request is inherited from vRtrMplsGeneralFRObject.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspHoldTimer		1.3.6.1.4.1.6527.3.1.2.6.1.1.39
The value of vRtrMplsLspHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming its data plane and declaring the lsp up to the service module. The value of vRtrMplsLspHoldTimer is inherited from the value of vRtrMplsGeneralHoldTimer.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..10

vRtrMplsLspCspfTeMetricEnabled		1.3.6.1.4.1.6527.3.1.2.6.1.1.40
The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE metric would be used for the purpose of the LSP path computation by CSPF. When the value of this object is 'false', the IGP metric is used to compute the path of the LSP by CSPF.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspP2mpId		1.3.6.1.4.1.6527.3.1.2.6.1.1.41
The value of vRtrMplsLspP2mpId specifies a unique identifier known as point to multipoint (P2MP) identifier (ID).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 1..65535

vRtrMplsLspClassType		1.3.6.1.4.1.6527.3.1.2.6.1.1.42
The value of vRtrMplsLspClassType specifies the class type (CT) associated with this LSP.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxRsvpDSTEClassType

vRtrMplsLspOperMetric		1.3.6.1.4.1.6527.3.1.2.6.1.1.43
The value of vRtrMplsLspOperMetric indicates the operational metric for the LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspLdpOverRsvpInclude		1.3.6.1.4.1.6527.3.1.2.6.1.1.44
The value of vRtrMplsLspLdpOverRsvpInclude specifies that this LSP can be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS) will subsequently provide LDP with all ECMP IGP next-hops and tunnel endpoints that it considers to be the lowest cost path to the destination. If an IGP calculation and an LDP over RSVP produce the same cost then LDP will always prefer an LDP over RSVP tunnel over an IGP route. By default, static and dynamic LSPs will be included when they are created. The default value for p2mp and bypass-only LSPs will be 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspLeastFill		1.3.6.1.4.1.6527.3.1.2.6.1.1.45
The value of vRtrMplsLspLeastFill specifies whether the use of the least-fill path selection method for the computation of the path of this LSP is enabled. By default, the path of an LSP is randomly chosen among a set of equal cost paths.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspVprnAutoBindInclude		1.3.6.1.4.1.6527.3.1.2.6.1.1.46
The value of vRtrMplsLspVprnAutoBindInclude specifies whether the LSP can be used as part of the auto-bind feature for VPRN services. By default a LSP is available for inclusion to be used for the auto-bind feature. By default, static and dynamic LSPs will be included when they are created. The default value for p2mp and bypass-only LSPs will be 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspMainCTRetryLimit		1.3.6.1.4.1.6527.3.1.2.6.1.1.47
The value of vRtrMplsLspMainCTRetryLimit specifies the number of attempts the software should make before it can start using the backup class type.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10000

vRtrMplsLspIgpShortcut		1.3.6.1.4.1.6527.3.1.2.6.1.1.48
The value of vRtrMplsLspIgpShortcut specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving IGP routes. When the value of vRtrMplsLspIgpShortcut is set to 'true' the RSVP LSP is used as a shortcut while resolving IGP routes. When the value of vRtrMplsLspIgpShortcut is set to 'false' the RSVP LSP is not used as a shortcut while resolving IGP routes.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspOriginTemplate		1.3.6.1.4.1.6527.3.1.2.6.1.1.49
When the value of the vRtrMplsLspType is 'p2mpAuto', the value of vRtrMplsLspOriginTemplate indicates the LSP Template which was used to create this LSP. For all other types of LSPs, the value of vRtrMplsLspOriginTemplate is an empty string.
Status: current	Access: read-only
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrMplsLspAutoBandwidth		1.3.6.1.4.1.6527.3.1.2.6.1.1.50
The value of the vRtrMplsLspAutoBandwidth specifies whether automatic bandwidth adjustment has been enabled or disabled for this LSP. A value of 'true' specifies that automatic bandwidth adjustment has been enabled for this LSP and a value of 'false' specifies that automatic bandwidth adjustment has been disabled for this LSP.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspCspfToFirstLoose		1.3.6.1.4.1.6527.3.1.2.6.1.1.51
The value of the vRtrMplsLspCspfToFirstLoose specifies whether the CSPF calculation till the first loose hop on ingress Label Edge Router (LER) is enabled or disabled for this Labeled Switched Path(LSP). By default, the value of vRtrMplsLspCspfToFirstLoose is 'false' which specifies that the CSPF calculation is done to the destination of LSP.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspPropAdminGroup		1.3.6.1.4.1.6527.3.1.2.6.1.1.52
The value of the vRtrMplsLspPropAdminGroup specifies whether the propagation of session attribute object with resource affinity (C-type 1) in PATH message is enabled. By default, the value of vRtrMplsLspPropAdminGroup is 'false' which specifies the session attribute object without resource affinity (C-Type 7) is propagated in PATH message and the admin-groups are ignored on Label Switched Router(LSR) while doing CSPF calculation.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspBgpShortcut		1.3.6.1.4.1.6527.3.1.2.6.1.1.53
The value of vRtrMplsLspBgpShortcut specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving BGP routes. When the value of vRtrMplsLspBgpShortcut is set to 'true' the RSVP LSP is used as a shortcut while resolving BGP routes. When the value of vRtrMplsLspBgpShortcut is set to 'false' the RSVP LSP is not used as a shortcut while resolving BGP routes.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspBgpTransportTunnel		1.3.6.1.4.1.6527.3.1.2.6.1.1.54
The value of vRtrMplsLspBgpTransportTunnel specifies whether an RSVP LSP is allowed or blocked in its usage as a transport LSP for BGP tunnel routes. When the value of vRtrMplsLspBgpTransportTunnel is set to 'include' an RSVP LSP is allowed to be used as a transport LSP for BGP tunnel routes. When the value of vRtrMplsLspBgpTransportTunnel is set to 'exclude' an RSVP LSP is not allowed to be used as a transport LSP for BGP tunnel routes.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxMplsLspBgpRSVPLSPTunState

vRtrMplsLspSwitchStbyPath		1.3.6.1.4.1.6527.3.1.2.6.1.1.55
The value of vRtrMplsLspSwitchStbyPath specifies whether to trigger the switch from the current active standby LSP path to a new LSP path as specified by vRtrMplsLspSwitchStbyPathIndex. When SET to the value of 'doAction', if the LSP path is actively on a current standby path, signaling will be initiated to switch to the new path. If a signal is triggered while a re-signaling is already in progress, the old transient state will be destroyed and a new transaction will be triggered. This variable must be set along with vRtrMplsLspSwitchStbyPathIndex to indicate the specific path index to switch to. An SNMP GET request on this object should return 'notApplicable'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxActionType

vRtrMplsLspSwitchStbyPathIndex		1.3.6.1.4.1.6527.3.1.2.6.1.1.56
The value of vRtrMplsLspSwitchStbyPathIndex specifies the index for the new standby LSP path in mplsTunnelTable. vRtrMplsLspSwitchStbyPath must also be set to 'doAction' for the new standby LSP path to be selected. A value of 0 specifies that the best active path will be selected.
Status: current	Access: read-create
OBJECT-TYPE
	MplsTunnelIndex

vRtrMplsLspSwitchStbyPathForce		1.3.6.1.4.1.6527.3.1.2.6.1.1.57
The value of vRtrMplsLspSwitchStbyPathForce specifies whether to force a switch from an active LSP path to a new standby path as specified by the values of vRtrMplsLspSwitchStbyPathIndex and vRtrMplsLspSwitchStbyPath. When vRtrMplsLspSwitchStbyPathForce variable is specified vRtrMplsLspSwitchStbyPathIndex and vRtrMplsLspSwitchStbyPath must be also be specified. A value of 'true' for vRtrMplsLspSwitchStbyPathForce specifies a forced switch. A value of 'false' specifies no forced switch.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspExcludeNodeAddrType		1.3.6.1.4.1.6527.3.1.2.6.1.1.58
The value of vRtrMplsLspExcludeNodeAddrType indicates the type of vRtrMplsLspExcludeNodeAddr.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRtrMplsLspExcludeNodeAddr		1.3.6.1.4.1.6527.3.1.2.6.1.1.59
When vRtrMplsLspExcludeNodeAddr is set to non-zero value, XRO (Exclude Routers) object will be included in bypass path message with supplied IP address. SET the value to 0.0.0.0 to disable.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsLspIgpShortcutLfaType		1.3.6.1.4.1.6527.3.1.2.6.1.1.60
The value of vRtrMplsLspIgpShortcutLfaType specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving IGP routes in LFA SPF or whether to exclude or include a RSVP LSP from being used as a LFA SPF. When the value of vRtrMplsLspIgpShortcutLfaType is set to 'lfaProtect' the RSVP LSP is used as a shortcut while resolving IGP routes in LFA SPF as well. When the value of vRtrMplsLspIgpShortcutLfaType is set to 'lfaOnly' the RSVP LSP is used as a LFA SPF and not used as igp-shortcut in regular SPF. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when the value of the object vRtrMplsLspIgpShortcut is not set to 'true'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(0), lfaProtect(1), lfaOnly(2)

vRtrMplsLspToAddrType		1.3.6.1.4.1.6527.3.1.2.6.1.1.61
The vRtrMplsLspToAddrType object is an enumerated value that specifies the destination address type of the LSP. The value of 'ipv4' specifies an IPv4 address and vRtrMplsLspToAddr should be configured. The value of 'nodeId' specifies an MPLS-TP node id and vRtrMplsLspToNodeId should be configured.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxMplsLspAddrType

vRtrMplsLspFromAddrType		1.3.6.1.4.1.6527.3.1.2.6.1.1.62
The vRtrMplsLspFromAddrType object is an enumerated value that specifies the source address type of the LSP. When the value of vRtrMplsLspFromAddrType is 'ipv4', it specifies an IPv4 address type and vRtrMplsLspFromAddr should be configured. When the value of vRtrMplsLspFromAddrType is 'nodeId', it specifies an MPLS-TP node id type and vRtrMplsLspFromNodeId should be configured.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxMplsLspAddrType

vRtrMplsLspToNodeId		1.3.6.1.4.1.6527.3.1.2.6.1.1.63
The value of vRtrMplsLspToNodeId specifies the destination node id of an MPLS-TP Static LSP. vRtrMplsLspToNodeId is configured when vRtrMplsLspToAddrType is set to 'nodeId'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxMplsTpNodeID

vRtrMplsLspFromNodeId		1.3.6.1.4.1.6527.3.1.2.6.1.1.64
The value of vRtrMplsLspFromNodeId specifies the source node id of an MPLS-TP Static LSP. vRtrMplsLspFromNodeId is configured when vRtrMplsLspFromAddrType is set to 'nodeId'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxMplsTpNodeID

vRtrMplsLspDestGlobalId		1.3.6.1.4.1.6527.3.1.2.6.1.1.65
The value of vRtrMplsLspDestGlobalId specifies the global identifier for an MPLS-TP Static LSP. A value of 0 indicates that a locally configured global identifier is to be used.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxMplsTpGlobalID

vRtrMplsLspDestTunnelNum		1.3.6.1.4.1.6527.3.1.2.6.1.1.66
The value of vRtrMplsLspDestTunnelNum specifies the destination tunnel number of an MPLS-TP Static LSP.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 1..61440

vRtrMplsLspStatTable		1.3.6.1.4.1.6527.3.1.2.6.2
The vRtrMplsLspStatTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspStatEntry

vRtrMplsLspStatEntry		1.3.6.1.4.1.6527.3.1.2.6.2.1
Each row entry represents a collection of statistics for a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspStatEntry

vRtrMplsLspOctets		1.3.6.1.4.1.6527.3.1.2.6.2.1.1
The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may be subject to several minutes delay. The delay is controllable by MPLS statistics gathering interval, which by default is once every 5 minutes. If MPLS statistics gathering is not enabled, this number will not increment.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsLspPackets		1.3.6.1.4.1.6527.3.1.2.6.2.1.2
The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may be subject to several minutes delay. The delay is controllable by MPLS statistics gathering interval, which by default is once every 5 minutes. If MPLS statistics gathering is not enabled, this number will not increment.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsLspAge		1.3.6.1.4.1.6527.3.1.2.6.2.1.3
The age (i.e., time from creation till now) of this LSP in 10-millisecond periods.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspTimeUp		1.3.6.1.4.1.6527.3.1.2.6.2.1.4
The total time in 10-millisecond units that this LSP has been been operational. For example, the percentage up time can be determined by computing (vRtrMplsLspTimeUp/vRtrMplsLspAge * 100 %).
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspTimeDown		1.3.6.1.4.1.6527.3.1.2.6.2.1.5
The total time in 10-millisecond units that this LSP has not been operational.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspPrimaryTimeUp		1.3.6.1.4.1.6527.3.1.2.6.2.1.6
The total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contribution of the primary path to the operational time is given by (vRtrMplsLspPrimaryTimeUp/vRtrMplsLspTimeUp * 100) %.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspTransitions		1.3.6.1.4.1.6527.3.1.2.6.2.1.7
The number of state transitions (up -> down and down -> up) this LSP has undergone.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsLspLastTransition		1.3.6.1.4.1.6527.3.1.2.6.2.1.8
The time in 10-millisecond units since the last transition occurred on this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspPathChanges		1.3.6.1.4.1.6527.3.1.2.6.2.1.9
The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsLspLastPathChange		1.3.6.1.4.1.6527.3.1.2.6.2.1.10
The time in 10-millisecond units since the last change occurred on this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspConfiguredPaths		1.3.6.1.4.1.6527.3.1.2.6.2.1.11
The number of paths configured for this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsLspStandbyPaths		1.3.6.1.4.1.6527.3.1.2.6.2.1.12
The number of standby paths configured for this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsLspOperationalPaths		1.3.6.1.4.1.6527.3.1.2.6.2.1.13
The number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsLspConfP2mpInstances		1.3.6.1.4.1.6527.3.1.2.6.2.1.14
The value of vRtrMplsLspConfP2mpInstances indicates the number of p2mp instances configured for this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsLspPathTableSpinlock		1.3.6.1.4.1.6527.3.1.2.6.3
voluntary serialization control for vRtrMplsLspPathTable. Primarily used by SNMP manager to coordinate changes to vRtrMplsLspPathInheritance.
Status: current	Access: read-write
OBJECT-TYPE
	TestAndIncr

vRtrMplsLspPathTable		1.3.6.1.4.1.6527.3.1.2.6.4
The vRtrMplsLspPathTable provides an association between an LSP and a path. An LSP can have more than one path association, but only one of those paths can be specified as the primary path type. Paths are defined in as Tunnel entries in the mplsTunnelTable in the MPLS-TE-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspPathEntry

vRtrMplsLspPathEntry		1.3.6.1.4.1.6527.3.1.2.6.4.1
Each row entry represents an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable. Entries in this table can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires vRtrMplsLspPathType to have been assigned a valid value.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspPathEntry

vRtrMplsLspPathRowStatus		1.3.6.1.4.1.6527.3.1.2.6.4.1.1
The row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'active' state vRtrMplsLspPathType must have been assigned a valid value.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsLspPathLastChange		1.3.6.1.4.1.6527.3.1.2.6.4.1.2
The sysUpTime when this row was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspPathType		1.3.6.1.4.1.6527.3.1.2.6.4.1.3
This variable is an enum that represents the role this path is taking within this LSP.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), primary(2), standby(3), secondary(4)

vRtrMplsLspPathCos		1.3.6.1.4.1.6527.3.1.2.6.4.1.4
The configured Class Of Service (COS) for this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7 | 255

vRtrMplsLspPathProperties		1.3.6.1.4.1.6527.3.1.2.6.4.1.5
The set of configured properties for this path expressed as a bit map. For example, if the path is an adaptive path, the bit corresponding to bit value 1 is set.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	record-route(0), adaptive(1), cspf(2), mergeable(3), fast-reroute(4)

vRtrMplsLspPathBandwidth		1.3.6.1.4.1.6527.3.1.2.6.4.1.6
The value of vRtrMplsLspPathBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) to be reserved for this LSP path. A value of zero (0) indicates that no bandwidth is reserved.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

vRtrMplsLspPathBwProtect		1.3.6.1.4.1.6527.3.1.2.6.4.1.7
When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will be used for EF services where customers need guaranteed bandwidth. It is expected that multiple EF services will be assigned to a single LSP. When bandwidth protection is enabled on an LSP, each time this LSP is used for a certain service the bandwidth allocated on that service is deducted from the bandwidth reserved for the LSP. Once the bandwidth is exhausted on the LSP, the ESR will provide feedback to the provider indicating that this LSP has exhausted its resources.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathState		1.3.6.1.4.1.6527.3.1.2.6.4.1.8
The current working state of this path within this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), active(2), inactive(3)

vRtrMplsLspPathPreference		1.3.6.1.4.1.6527.3.1.2.6.4.1.9
When there is no path in the LSP with vRtrMplsLspPathType value of 'primary', 'secondary' type paths of this LSP with the same value of vRtrMplsLspPathPreference are used for load sharing. When a 'primary' type path exists in the LSP, vRtrMplsLspPathPreference is used to denote at which priority one 'secondary' path will supercede another when the 'primary' fails. 1 indicates the highest priority value. For LSP with vRtrMplsLspPathType value of 'standby' type paths the value of vRtrMplsLspPathPreference is in the range of (1..255). For path type 'primary' the value of vRtrMplsLspPathPreference is set to 0. For path type 'secondary' the value of vRtrMplsLspPathPreference is set to 255.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

vRtrMplsLspPathCosSource		1.3.6.1.4.1.6527.3.1.2.6.4.1.10
When vRtrMplsLspPathCosSource is set to 'true', the value of vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService. When 'false', the value of vRtrMplsLspClassOfService is used.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathClassOfService		1.3.6.1.4.1.6527.3.1.2.6.4.1.11
The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspPathClassOfService. The EXP bits in the MPLS header are set based on the global mapping table that specified the mapping between the forwarding class and the EXP bits. When class of service is specified, all packets will be marked with the same EXP bits that match the vRtrMplsLspPathClassOfService name in the mapping table. An empty string, ''H, specifies no class of service. Packets are assigned EXP bits based on the same mapping table, however each packet is marked with EXP bits based on the forwarding class from which it is serviced.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrMplsLspPathSetupPriority		1.3.6.1.4.1.6527.3.1.2.6.4.1.12
The value of vRtrMplsLspPathSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsLspPathHoldPriority		1.3.6.1.4.1.6527.3.1.2.6.4.1.13
The value of vRtrMplsLspPathHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsLspPathRecord		1.3.6.1.4.1.6527.3.1.2.6.4.1.14
When the value of vRtrMplsLspPathRecord is 'record', recording of all the hops that a LSP traverses is enabled. When the value of vRtrMplsLspPathRecord is 'noRecord', recording of all the hops that a LSP traverses is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	record(1), noRecord(2)

vRtrMplsLspPathHopLimit		1.3.6.1.4.1.6527.3.1.2.6.4.1.15
The value of vRtrMplsLspPathHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egress ESRs. A LSP will not be setup if the hop limit is exceeded. When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	2..255

vRtrMplsLspPathSharing		1.3.6.1.4.1.6527.3.1.2.6.4.1.16
When vRtrMplsLspPathSharing has a value of 'true', path-sharing is enabled for the secondary path. Path-sharing is used to control the hops of the secondary path. When vRtrMplsLspPathSharing have a value of 'false', CSPF attempts to find a path for the secondary that does not include any node or link that is common to the active primary path. This variable is valid only if vRtrMplsLspPathType is set to 'secondary'.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathAdminState		1.3.6.1.4.1.6527.3.1.2.6.4.1.17
The desired administrative state for this LSP path.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsLspPathOperState		1.3.6.1.4.1.6527.3.1.2.6.4.1.18
The current operational state of this LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrMplsLspPathInheritance		1.3.6.1.4.1.6527.3.1.2.6.4.1.19
For each writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrMplsLspTable, controls whether to inherit the operational value of that object, or use the administratively set value. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. This object is a bit-mask, with the following positions: vRtrMplsLspPathHopLimit 0x2000 vRtrMplsLspPathAdminGroupInclude 0x20000 vRtrMplsLspPathAdminGroupExclude 0x40000 vRtrMplsLspPathAdaptive 0x80000 vRtrMplsLspPathOptimizeTimer 0x100000 vRtrMplsLspPathClassType 0x1000000 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. The corresponding mask bit will be changed to one when SNMP SET is performed on any of the inherited objects (vRtrMplsLspPathHopLimit, vRtrMplsLspPathAdminGroupInclude, etc). When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsLspTable.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathLspId		1.3.6.1.4.1.6527.3.1.2.6.4.1.20
This value identifies the label switched path that is signaled for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	MplsLSPID

vRtrMplsLspPathRetryTimeRemaining		1.3.6.1.4.1.6527.3.1.2.6.4.1.21
The time in 10-millisecond units to signal this path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathTunnelARHopListIndex		1.3.6.1.4.1.6527.3.1.2.6.4.1.22
Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is no recored hop list associated with this LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0 | 1..2147483647

vRtrMplsLspPathNegotiatedMTU		1.3.6.1.4.1.6527.3.1.2.6.4.1.23
The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during establishment of this LSP Path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathFailCode		1.3.6.1.4.1.6527.3.1.2.6.4.1.24
The value of vRtrMplsLspPathFailCode specifies the reason code for LSP Path failure. A value of 0 indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsLspPathFailNodeAddr		1.3.6.1.4.1.6527.3.1.2.6.4.1.25
The value of vRtrMplsLspPathFailNodeAddr specifies the IP address of the node in the LSP path at which the LSP path failed. When no failure has occurred, this value is 0.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

vRtrMplsLspPathAdminGroupInclude		1.3.6.1.4.1.6527.3.1.2.6.4.1.26
The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when this LSP path is setup. If bit 'n' is set, then the admin group with value 'n' is included for this LSP path. This implies that each link that this LSP path goes through must be associated with at least one of the admin groups in the include list. When the vRtrMplsLspPathAdminGroupInclude bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspAdminGroupInclude.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathAdminGroupExclude		1.3.6.1.4.1.6527.3.1.2.6.4.1.27
The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when this LSP path is setup. If bit 'n' is set, then the admin group with value 'n' is excluded for this LSP path. This implies that each link that this LSP path goes through must not be associated with any of the admin groups in the exclude list. When the vRtrMplsLspPathAdminGroupExclude bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspAdminGroupExclude.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathAdaptive		1.3.6.1.4.1.6527.3.1.2.6.4.1.28
Setting the value of vRtrMplsLspPathAdaptive to 'true', enables make-before-break functionality for the LSP path. Setting the value to 'false', disables make-before-break functionality for the path. When the vRtrMplsLspPathAdaptive bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspAdaptive.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathOptimizeTimer		1.3.6.1.4.1.6527.3.1.2.6.4.1.29
The value of vRtrMplsLspPathOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSP path. When CSPF is enabled, changes in the network topology may cause the existing path of a loose-hop LSP to become sub-optimal. Such LSPs can be re-optimized and re-routed through more optimal paths by recalculating the path for the LSP at periodic intervals. This interval is controlled by the optimize timer. A value of 0 indicates that optimization has been disabled. When the vRtrMplsLspPathOptimizeTimer bit in vRtrMplsLspPathInheritance is cleared (0), the value returned in the GET request is inherited from vRtrMplsLspOptimizeTimer.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

vRtrMplsLspPathNextOptimize		1.3.6.1.4.1.6527.3.1.2.6.4.1.30
The value of vRtrMplsLspPathNextOptimize specifies the current value of the optimize timer. This is the time, in seconds, remaining till the optimize timer will expire and optimization will be started for the LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

vRtrMplsLspPathOperBandwidth		1.3.6.1.4.1.6527.3.1.2.6.4.1.31
The value of vRtrMplsLspPathOperBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserved for the operational LSP path. When make-before-break functionality for the LSP is enabled and if the path bandwidth is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new bandwidth settings has been established. While a new path is being signaled, the administrative value and the operational values of the path bandwidth may differ. The value of vRtrMplsLspPathBandwidth specifies the bandwidth requirements for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperBandwidth specifies the bandwidth reserved for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsLspPathMBBState		1.3.6.1.4.1.6527.3.1.2.6.4.1.32
The value of vRtrMplsLspPathMBBState specifies the state of the most recent invocation of the make-before-break functionality. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful inProgress (3) - make-before-break in progress fail (4) - make-before-break failed. This object was made obsolete in release 6.0 R4 and replaced with vRtrMplsLspPathLastMBBState.
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), success(2), inProgress(3), fail(4)

vRtrMplsLspPathResignal		1.3.6.1.4.1.6527.3.1.2.6.4.1.33
Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers the re-signaling of the LSP path. If the LSP path is operationally down either due to network failure or due to the retry attempts count being exceeded, setting this variable to 'doAction' will initiate the signaling for the path. A make-before-break signaling for the path will be initiated if the LSP is operationally up but the make-before-break retry attempts count was exceeded. Make-before-break signaling will also be initiated for any LSP that is operationally up. This may be used to cause a loose-hop LSP to be optimized. If a re-signal is triggered while a re-signaling is already in progress, the old transient state will be destroyed and a new transaction being triggered. An SNMP GET request on this object should return 'notApplicable'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxActionType

vRtrMplsLspPathTunnelCRHopListIndex		1.3.6.1.4.1.6527.3.1.2.6.4.1.34
Primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there is no computed hop list associated with this LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0 | 1..2147483647

vRtrMplsLspPathOperMTU		1.3.6.1.4.1.6527.3.1.2.6.4.1.35
The value of vRtrMplsLspPathOperMTU specifies the size for the Maximum transmission unit (MTU) that is currently operation for this LSP Path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathRecordLabel		1.3.6.1.4.1.6527.3.1.2.6.4.1.36
When the value of vRtrMplsLspPathRecordLabel is 'record', recording of labels at each node that a LSP traverses is enabled. When the value of vRtrMplsLspPathRecordLabel is 'noRecord', recording of labels at each node that a LSP traverses is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	record(1), noRecord(2)

vRtrMplsLspPathSrlg		1.3.6.1.4.1.6527.3.1.2.6.4.1.37
The value of vRtrMplsLspPathSrlg specifies whether the use of SRLG constraint in the computation of a secondary path for an LSP at the head-end Label Edge Router (LER) is enabled. The value vRtrMplsLspPathSrlg is used only when the value of vRtrMplsLspPathType is 'secondary'. When the value of vRtrMplsLspPathSrlg is true, the use of SRLG constraint in the computation of a secondary path is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathSrlgDisjoint		1.3.6.1.4.1.6527.3.1.2.6.4.1.38
The value of vRtrMplsLspPathSrlgDisjoint specifies whether the relevant standby lsp path is SRLG disjoint from the associated primary lsp path for an LSP at the head-end Label Edge Router (LER). The value vRtrMplsLspPathSrlgDisjoint is used only when the value of vRtrMplsLspPathType is 'standby'. When the value of vRtrMplsLspPathSrlgDisjoint is 'true', primary and standby lsp path do not have SRLG membership in common. When the value of vRtrMplsLspPathSrlgDisjoint is 'false', primary and standby lsp path have SRLG membership in common.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathLastResigAttempt		1.3.6.1.4.1.6527.3.1.2.6.4.1.39
The value of vRtrMplsLspPathLastResigAttempt indicates the sysUpTime when the last attempt to resignal this LSP was made.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspPathMetric		1.3.6.1.4.1.6527.3.1.2.6.4.1.40
The value of vRtrMplsLspPathMetric indicates the cost of the traffic engineered path returned by the IGP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathLastMBBType		1.3.6.1.4.1.6527.3.1.2.6.4.1.41
The value of vRtrMplsLspPathLastMBBType indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsMBBType

vRtrMplsLspPathLastMBBEnd		1.3.6.1.4.1.6527.3.1.2.6.4.1.42
The value of vRtrMplsLspPathLastMBBEnd indicates the sysUpTime when the last MBB ended.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspPathLastMBBMetric		1.3.6.1.4.1.6527.3.1.2.6.4.1.43
The value of vRtrMplsLspPathLastMBBMetric indicates the cost of the traffic engineered path for the LSP path prior to MBB.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathLastMBBState		1.3.6.1.4.1.6527.3.1.2.6.4.1.44
The value of vRtrMplsLspPathLastMBBState specifies whether the last Make-before-break was successful or failed. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful fail (3) - make-before-break failed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), success(2), fail(3)

vRtrMplsLspPathMBBTypeInProg		1.3.6.1.4.1.6527.3.1.2.6.4.1.45
The value of vRtrMplsLspPathMBBTypeInProg indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is in progress.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsMBBType

vRtrMplsLspPathMBBStarted		1.3.6.1.4.1.6527.3.1.2.6.4.1.46
The value of vRtrMplsLspPathMBBStarted indicates the sysUpTime when the in-progress MBB started.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspPathMBBNextRetry		1.3.6.1.4.1.6527.3.1.2.6.4.1.47
The value of vRtrMplsLspPathMBBNextRetry indicates the amount of time remaining in seconds before the next attempt is made to retry the in-progress MBB.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathMBBRetryAttempts		1.3.6.1.4.1.6527.3.1.2.6.4.1.48
The value of vRtrMplsLspPathMBBRetryAttempts indicates 'n' where nth attempt for the MBB is in progress.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathMBBFailCode		1.3.6.1.4.1.6527.3.1.2.6.4.1.49
The value of vRtrMplsLspPathMBBFailCode specifies the reason code for in-progress MBB failure. A value of 'none' indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsLspPathMBBFailNodeArType		1.3.6.1.4.1.6527.3.1.2.6.4.1.50
The value of vRtrMplsLspPathMBBFailNodeArType indicates the type of vRtrMplsLspPathMBBFailNodeAddr. A value of 'unknown' indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

vRtrMplsLspPathMBBFailNodeAddr		1.3.6.1.4.1.6527.3.1.2.6.4.1.51
The value of vRtrMplsLspPathMBBFailNodeAddr specifies the IP address of the node in the LSP path at which the in-progress MBB failed. A value of 'unknown' for vRtrMplsLspPathMBBFailNodeArType and empty string for vRtrMplsLspPathMBBFailNodeAddr indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsLspPathClassType		1.3.6.1.4.1.6527.3.1.2.6.4.1.52
The value of vRtrMplsLspPathClassType specifies the class type (CT) associated with this LSP path. When the vRtrMplsLspPathClassType bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspClassType.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxRsvpDSTEClassType

vRtrMplsLspPathOperMetric		1.3.6.1.4.1.6527.3.1.2.6.4.1.53
The value of vRtrMplsLspPathOperMetric indicates the operational metric for the LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathResignalEligible		1.3.6.1.4.1.6527.3.1.2.6.4.1.54
The value of vRtrMplsLspPathResignalEligible indicates that the LSP path is eligible for re-signaling on the basis of available bandwidth.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathIsFastRetry		1.3.6.1.4.1.6527.3.1.2.6.4.1.55
The value of vRtrMplsLspPathIsFastRetry indicates which retry timer is being referred to by vRtrMplsLspPathRetryTimeRemaining. When the value of vRtrMplsLspPathIsFastRetry is set to 'true', vRtrMplsLspPathRetryTimeRemaining is referring to either the P2P active path fast timer, vRtrMplsGenP2pActPathFastRetry or the secondary fast retry timer, vRtrMplsGeneralSecFastRetryTimer. When the value of vRtrMplsLspPathIsFastRetry is set to 'false', vRtrMplsLspPathRetryTimeRemaining is referring to the LSP retry timer, vRtrMplsLspRetryTimer.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathBackupCT		1.3.6.1.4.1.6527.3.1.2.6.4.1.56
The value of vRtrMplsLspPathBackupCT specifies the backup class type (CT) associated with the LSP. A value of -1 indicates that no backup class type has been configured for the LSP.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1 | 0..7

vRtrMplsLspPathMainCTRetryRem		1.3.6.1.4.1.6527.3.1.2.6.4.1.57
The value of vRtrMplsLspPathMainCTRetryRem specifies the number of remaining attempts the software should make before it can start using the backup class type for the LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathOperCT		1.3.6.1.4.1.6527.3.1.2.6.4.1.58
The value of vRtrMplsLspMainCTRetryLimit specifies operational class type (CT) associated with the LSP. A value of -1 indicates that no operational class type has been configured for the LSP
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 | 0..7

vRtrMplsLspPathNewPathIndex		1.3.6.1.4.1.6527.3.1.2.6.4.1.59
The value of vRtrMplsLspPathNewPathIndex specifies the index for the new path in mplsTunnelTable.
Status: current	Access: read-create
OBJECT-TYPE
	MplsTunnelIndex

vRtrMplsLspPathMBBMainCTRetryRem		1.3.6.1.4.1.6527.3.1.2.6.4.1.60
The value of vRtrMplsLspPathMBBMainCTRetryRem indicates the number of remaining attempts the software should make before it can start using the backup class type for the LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathSigBWMBBInProg		1.3.6.1.4.1.6527.3.1.2.6.4.1.61
The value of vRtrMplsLspPathSigBWMBBInProg indicates the bandwidth used to signal the MBB currently in progress.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathSigBWLastMBB		1.3.6.1.4.1.6527.3.1.2.6.4.1.62
The value of vRtrMplsLspPathSigBWLastMBB indicates the bandwidth used to signal the last MBB that occurred.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathActiveByManual		1.3.6.1.4.1.6527.3.1.2.6.4.1.63
The value of vRtrMplsLspPathActiveByManual indicates whether a secondary standby path has become the active LSP path due to manual intervention. When vRtrMplsLspSwitchStbyPath is set to 'doAction' a manual switch is attempted. When vRtrMplsLspSwitchStbyPathForce is set to 'true' the manual switch is forced. When the value of vRtrMplsLspPathActiveByManual is set to 'notApplicable', the LSP path is active but not due to any manual intervention. When the value of vRtrMplsLspPathActiveByManual is set to 'noForce', the LSP path has become active by a manual switch specified by the user. When the value of vRtrMplsLspPathActiveByManual is set to 'force', the LSP path has become active by a forced manual switch executed by the user.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), noForce(1), force(2)

vRtrMplsLspPathTimeoutIn		1.3.6.1.4.1.6527.3.1.2.6.4.1.64
The value of vRtrMplsLspPathTimeoutIn specifies the amount of time remaining, in seconds, for the LSP path state to time out after the initial PATH message has been sent. If the timer expires and the LSP path has not become operationally up, the LSP path is torn down and the retry timer is started to schedule a new retry cycle.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathMBBTimeoutIn		1.3.6.1.4.1.6527.3.1.2.6.4.1.65
The value of vRtrMplsLspPathMBBTimeoutIn specifies the amount of time remaining, in seconds, for the in-progress MBB path state to time out after the initial PATH message has been sent. If the timer expires and the in-progress MBB path has not become operationally up, the MBB path is torn down and the retry timer is started to schedule a new retry cycle.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathStatTable		1.3.6.1.4.1.6527.3.1.2.6.5
The vRtrMplsLspPathStatTable has an entry for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspPathStatEntry

vRtrMplsLspPathStatEntry		1.3.6.1.4.1.6527.3.1.2.6.5.1
Each row entry represents a collection of statistics for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspPathStatEntry

vRtrMplsLspPathTimeUp		1.3.6.1.4.1.6527.3.1.2.6.5.1.1
The total time in 10-millisecond units that this LSP path has been operational. For example, the percentage up time can be determined by computing (vRtrMplsLspPathTimeUp/vRtrMplsLspAge * 100 %).
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspPathTimeDown		1.3.6.1.4.1.6527.3.1.2.6.5.1.2
The total time in 10-millisecond units that this LSP Path has not been operational.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsLspPathRetryAttempts		1.3.6.1.4.1.6527.3.1.2.6.5.1.3
The number of unsuccessful attempts which have been made to signal this path. As soon as the path gets signalled, this is set to 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathTransitionCount		1.3.6.1.4.1.6527.3.1.2.6.5.1.4
The object vRtrMplsLspPathTransitionCount maintains the number of transitions that have occurred for this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsLspPathCspfQueries		1.3.6.1.4.1.6527.3.1.2.6.5.1.5
The value of vRtrMplsLspPathCspfQueries specifies the number of CSPF queries that have been made for this LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsXCTable		1.3.6.1.4.1.6527.3.1.2.6.6
This table has an entry for each mplsXCEntry in the mplsXCTable. It serves as an another indirect index to the mplsXCTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsXCEntry

vRtrMplsXCEntry		1.3.6.1.4.1.6527.3.1.2.6.6.1
An entry in this table represents the indices to be used to search the mplsXCTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsXCEntry

vRtrMplsXCIndex		1.3.6.1.4.1.6527.3.1.2.6.6.1.1
An index of the mplsXCTable. It represents mplsXCIndex, a field of the mplsXCTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

vRtrMplsInSegmentIfIndex		1.3.6.1.4.1.6527.3.1.2.6.6.1.2
An index of the mplsXCTable. It represents mplsInSegmentIfIndex of the mplsInSegmentTable.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

vRtrMplsInSegmentLabel		1.3.6.1.4.1.6527.3.1.2.6.6.1.3
An index of the mplsXCTable. It represents mplsInSegmentLabel of the mplsInSegmentTable.
Status: current	Access: read-only
OBJECT-TYPE
	MplsLabel

vRtrMplsOutSegmentIndex		1.3.6.1.4.1.6527.3.1.2.6.6.1.4
An index of the mplsXCTable. It represents mplsOutSegmentIndex of the mplsOutSegmentTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..2147483647

vRtrMplsERHopTunnelIndex		1.3.6.1.4.1.6527.3.1.2.6.6.1.5
Primary index into the mplsTunnelHopTable identifying a particular recorded hop list (stores ERO in LSR).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsARHopTunnelIndex		1.3.6.1.4.1.6527.3.1.2.6.6.1.6
Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list (stores RRO in LSR).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsRsvpSessionIndex		1.3.6.1.4.1.6527.3.1.2.6.6.1.7
An index into the TIMETRA-RSVP-MIB::vRtrRsvpSessionTable identifying a particular RSVP session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsXCFailCode		1.3.6.1.4.1.6527.3.1.2.6.6.1.8
The value of vRtrMplsXCFailCode specifies the reason code for cross-connect failure. A value of 0 indicates that no failure occurred.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsXCCHopTableIndex		1.3.6.1.4.1.6527.3.1.2.6.6.1.9
Index to the vRtrMplsTunnelCHopTable entries that specify the hops for the CSPF path for a detour LSP for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsGeneralTable		1.3.6.1.4.1.6527.3.1.2.6.7
The vRtrMplsGeneralTable contains objects for general control and management of an MPLS protocol instance within a virtual router.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsGeneralEntry

vRtrMplsGeneralEntry		1.3.6.1.4.1.6527.3.1.2.6.7.1
Each row entry represents an instance of the MPLS protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations. An entry in this table is created by the agent when vRtrMplsStatus in the vRtrConfTable is set to 'create'. The entry is destroyed when vRtrMplsStatus is set to 'delete'
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsGeneralEntry

vRtrMplsGeneralLastChange		1.3.6.1.4.1.6527.3.1.2.6.7.1.1
The sysUpTime when this row was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsGeneralAdminState		1.3.6.1.4.1.6527.3.1.2.6.7.1.2
When vRtrMplsGeneralAdminState is set to 'inService', the agent attempts to enable the MPLS protocol instance on this router. When vRtrMplsGeneralAdminState is set to 'outOfService', the agent attempts to disable the MPLS protocol instance on this router.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsGeneralOperState		1.3.6.1.4.1.6527.3.1.2.6.7.1.3
vRtrMplsGeneralOperState indicates the current operating state of this MPLS protocol instance on this router.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrMplsGeneralPropagateTtl		1.3.6.1.4.1.6527.3.1.2.6.7.1.4
When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs, the ingress ESR writes the TTL of the IP packet in the label and each transit ESR decrements the TTL in the label. At the egress ESR the TTL value from the label is written into the IP packet. When vRtrMplsGeneralPropagateTtl is set to 'false', the ingress ESR ignores the IP packet TTl and writes the value of 255 into the label, while the egress ESR does not write the label TTL into the IP packet. This assumes that all ESRs have been configured to have vRtrMplsGeneralPropagateTtl set to 'false', or this may result in unpredictable behavior.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralTE		1.3.6.1.4.1.6527.3.1.2.6.7.1.5
The value of vRtrMplsGeneralTE specifies the type of traffic engineering used with this MPLS instance.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), bgp(2), bgpigp(3)

vRtrMplsGeneralNewLspIndex		1.3.6.1.4.1.6527.3.1.2.6.7.1.6
This object is used to assign values to vRtrMplsLspIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrMplsLspEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
Status: current	Access: read-create
OBJECT-TYPE
	TestAndIncr

vRtrMplsGeneralOptimizeTimer		1.3.6.1.4.1.6527.3.1.2.6.7.1.7
The value of vRtrMplsGeneralOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSPs. When CSPF is enabled, changes in the network topology may cause the existing path of a loose-hop LSP to become sub-optimal. Such LSPs can be re-optimized and re-routed through more optimal paths by recalculating the path for the LSP at periodic intervals. This interval is controlled by the optimize timer. A value of 0 indicates that optimization has been disabled. The value for vRtrMplsGeneralOptimizeTimer is by default inherited by all LSPs and their paths.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

vRtrMplsGeneralFRObject		1.3.6.1.4.1.6527.3.1.2.6.7.1.8
The value of vRtrMplsGeneralFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or without the fast reroute object. The value of vRtrMplsGeneralFRObject is ignored if fast reroute is disabled for the LSP or if the LSP is using 'One-to-one Backup'. The value for vRtrMplsGeneralFRObject is by default inherited by all LSPs.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralResignalTimer		1.3.6.1.4.1.6527.3.1.2.6.7.1.9
The value of vRtrMplsGeneralResignalTimer specifies the value for the P2P (point-to-point) LSP resignal timer, that is the time, in minutes, the software will wait before attempting to resignal the P2P LSPs. When the resignal timer expires, if the new recorded hop list (RRO) for an P2P LSP has a better metric than the current recorded hop list, an attempt will be made to resignal that P2P LSP using the make-before-break mechanism. If the attempt to resignal an P2P LSP fails, the P2P LSP will continue to use the existing path and a resignal will be attempted the next time the timer expires. A value of 0 for the resignal timer indicates that timer-based P2P LSP resignalling has been disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 30..10080

vRtrMplsGeneralHoldTimer		1.3.6.1.4.1.6527.3.1.2.6.7.1.10
The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming its data plane and declaring the lsp up to the service module. A value of 0 indicates that the hold timer has been disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10

vRtrMplsGeneralDynamicBypass		1.3.6.1.4.1.6527.3.1.2.6.7.1.11
The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic bypass tunnels are enabled. By default, dynamic bypass tunnels are enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralNextResignal		1.3.6.1.4.1.6527.3.1.2.6.7.1.12
The value of vRtrMplsGeneralNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsGeneralOperDownReason		1.3.6.1.4.1.6527.3.1.2.6.7.1.13
The value of vRtrMplsGeneralOperDownReason indicates the reason due to which the MPLS instance is operationally down.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsOperDownReasonCode

vRtrMplsGeneralSrlgFrr		1.3.6.1.4.1.6527.3.1.2.6.7.1.14
The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk Link Group (SRLG) constraint will be used in the computation of FRR bypass or detour to be associated with any primary LSP path on the system. When the value of vRtrMplsGeneralSrlgFrr is 'true' the use of SRLG constraint is enabled. By default, the use of SRLG constraint is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralSrlgFrrStrict		1.3.6.1.4.1.6527.3.1.2.6.7.1.15
The value of vRtrMplsGeneralSrlgFrrStrict specifies whether to associate the LSP with a bypass or signal a detour if a bypass or detour satisfies all other constraints except the SRLG constraints. When the value of vRtrMplsGeneralSrlgFrrStrict is 'true' and a path that meets SRLG constraints is not found, the bypass or detour is not setup. If this value is set to 'true' when vRtrMplsGeneralSrlgFrr is set to 'false', vRtrMplsGeneralSrlgFrr is set to 'true' also. By default, the value of vRtrMplsGeneralSrlgFrrStrict is 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralNewP2mpInstIndex		1.3.6.1.4.1.6527.3.1.2.6.7.1.16
The value of vRtrMplsGeneralNewP2mpInstIndex specifies the object that is used to assign values to vRtrMplsP2mpInstIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrMplsP2mpInstEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
Status: current	Access: read-create
OBJECT-TYPE
	TestAndIncr

vRtrMplsGeneralLeastFillMinThd		1.3.6.1.4.1.6527.3.1.2.6.7.1.17
The value of vRtrMplsGeneralLeastFillMinThd specifies in percentage the least minimum threshold parameter used in the least-fill path selection process. When comparing the percentage of least available link bandwidth across the sorted paths, whenever two percentages differ by less than the value configured as the vRtrMplsGeneralLeastFillMinThd, CSPF will consider them equal and will apply a random number generator to select the path among these paths.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..100

vRtrMplsGenLeastFillReoptiThd		1.3.6.1.4.1.6527.3.1.2.6.7.1.18
The value of vRtrMplsGenLeastFillReoptiThd specifies in percentage the least reoptimization threshold parameter used in the least-fill path selection process. During a timer-based re-signaling of an LSP path which has vRtrMplsLspLeastFill enabled, CSPF will first update the least-available bandwidth figure for the current path of this LSP. It then applies the least-fill path selection method to select a new path for this LSP. If the new computed path has the same cost as the current path, it will compare the least-available bandwidth figures of the two paths and if the difference exceeds vRtrMplsGenLeastFillReoptiThd, a trap will be generated to indicate that a better least-fill path is available for this LSP.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..100

vRtrMplsGeneralUseSrlgDB		1.3.6.1.4.1.6527.3.1.2.6.7.1.19
The value of vRtrMplsGeneralUseSrlgDB specifies whether the use of the user SRLG database by CSPF is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralP2mpResigTimer		1.3.6.1.4.1.6527.3.1.2.6.7.1.20
The value of vRtrMplsGeneralP2mpResigTimer specifies the value for the P2MP (point to multi point) LSP resignal timer, that is the time, in minutes, the software will wait before attempting to resignal the P2MP LSPs. When the resignal timer expires, an attempt to resignal the entire P2MP instance comprising all source to leaf (S2Ls) are done, the IGP or TE metric of the S2Ls are not taken into consideration. If the attempt to resignal an P2MP LSP fails, the P2MP LSP will continue to use the existing S2Ls and a resignal will be attempted the next time the timer expires. A value of 0 for the resignal timer indicates that timer-based P2MP LSP resignalling has been disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 60..10080

vRtrMplsGeneralP2mpNextResignal		1.3.6.1.4.1.6527.3.1.2.6.7.1.21
The value of vRtrMplsGeneralP2mpNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralP2mpResigTimer to expire.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsGeneralSecFastRetryTimer		1.3.6.1.4.1.6527.3.1.2.6.7.1.22
The value of vRtrMplsGeneralSecFastRetryTimer specifies the value, in seconds, used as fast retry timer for a secondary path. If the first attempt to setup a secondary path fails due to a path error, the fast retry timer will be started for the secondary path so that the path can be retried sooner. If the next attempt also fails, further retries for the path will use the configured value for LSP retry timer, vRtrMplsLspRetryTimer. If retry-timer for the LSP is configured to be less than the MPLS secondary-fast-retry-timer, all retries for the secondary path will use the LSP retry-timer. A value of 0 indicates that fast retry for secondary paths has been disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10

vRtrMplsGeneralShortTTLPropLocal		1.3.6.1.4.1.6527.3.1.2.6.7.1.23
The value of vRtrMplsGeneralShortTTLPropLocal specifies whether or not to enable the propagation of time to live (TTL) from the IP packet header into the header of the resulting MPLS packet for all local packets forwarded over a LSP shortcut. When the value is 'true' TTL is propagated from the IP packet header into the header of the resulting MPLS packet.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralShortTTLPropTrans		1.3.6.1.4.1.6527.3.1.2.6.7.1.24
The value of vRtrMplsGeneralShortTTLPropTrans specifies whether or not to enable the propagation of time to live (TTL) from the IP packet header into the header of the resulting MPLS packet for all transit packets forwarded over a LSP shortcut. When the value is 'true' TTL is propagated from the IP packet header into the header of the resulting MPLS packet.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralStaticLspFRTimer		1.3.6.1.4.1.6527.3.1.2.6.7.1.25
The value of vRtrMplsGeneralStaticLspFRTimer specifies the audit time for static LSPs which are not currently up.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..30

vRtrMplsGeneralAutoBWDefSampMul		1.3.6.1.4.1.6527.3.1.2.6.7.1.26
The value of vRtrMplsGeneralAutoBWDefSampMul specifies the global default for collection intervals in a sample interval.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..511

vRtrMplsGeneralAutoBWDefAdjMul		1.3.6.1.4.1.6527.3.1.2.6.7.1.27
The value of vRtrMplsGeneralAutoBWDefAdjMul specifies the global default for collection intervals in an adjust interval.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..16383

vRtrMplsGeneralExpBackoffRetry		1.3.6.1.4.1.6527.3.1.2.6.7.1.28
The value of vRtrMplsGeneralExpBackoffRetry specifies the state of Exponential Backoff Retry mechanism.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralCspfOnLooseHop		1.3.6.1.4.1.6527.3.1.2.6.7.1.29
The value of vRtrMplsGeneralCspfOnLooseHop specifies whether the Constrained Shortest Path First (CSPF) calculation till the next loose hop is enabled or not.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralP2PMaxByPassAssoc		1.3.6.1.4.1.6527.3.1.2.6.7.1.30
The value of vRtrMplsGeneralP2PMaxByPassAssoc specifies the maximum number of LSP primary paths that can associate with each manual or dynamic bypass point-to-point (P2P) LSP.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	100..131072

vRtrMplsGenP2pActPathFastRetry		1.3.6.1.4.1.6527.3.1.2.6.7.1.31
The value of vRtrMplsGenP2pActPathFastRetry specifies the time, in seconds, active path point-to-point (P2P) LSP waits before it attempts to re-establish itself. This timer is started after first attempt to setup active path P2P LSP fails. When vRtrMplsGenP2pActPathFastRetry is set to 0, fast retry timer for active path P2P LSP is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10

vRtrMplsGenP2mpS2lFastRetry		1.3.6.1.4.1.6527.3.1.2.6.7.1.32
The value of vRtrMplsGenP2mpS2lFastRetry specifies the time, in seconds, active path point to multipoint (P2MP) source to leaf (S2L) LSP waits before it attempts to re-establish itself. This timer is started after first attempt to setup active path P2MP S2L LSP fails. When vRtrMplsGenP2mpS2lFastRetry is set to 0, fast retry timer for active path P2MP S2L LSP is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10

vRtrMplsGenLspInitRetryTimeout		1.3.6.1.4.1.6527.3.1.2.6.7.1.33
The value of vRtrMplsGenLspInitRetryTimeout specifies the amount of time in seconds the software waits for an LSP path to come up after sending out the initial Path message. If the initial retry timeout period expires and the LSP path is not up, it is torn down and the LSP retry timer is started to schedule a new retry cycle using a new LSP-id.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..600

vRtrMplsLoggerEventBundling		1.3.6.1.4.1.6527.3.1.2.6.7.1.34
The value of vRtrMplsLoggerEventBundling specifies whether or not the notification bundling mechanism is enabled. When the value of vRtrMplsLoggerEventBundling is set to 'true', all TIMETRA-SYSTEM-MIB::tmnxConfigCreate and TIMETRA-SYSTEM-MIB::tmnxConfigDelete notifications that are generated because of creation or deletion of entries in the vRtrMplsXCTable during quiet period of 2 minutes are bundled in a single notification. An entry is created or deleted in vRtrMplsXCTable when a RSVP session is created or deleted on this ingress, transit or egress router instance causing creation or deletion of an entry in TIMETRA-RSVP-MIB::vRtrRsvpSessionTable. A vRtrMplsXCBundleChange notification is generated after every quiet interval of 2 minutes if one or more RSVP session changed state and retained that state during the quiet interval. However if the state of the RSVP sessions does not remain stable for an entire quiet interval, the notification is generated after the maximum interval period of 10 minutes has elapsed.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsGenIssuMplsLockdown		1.3.6.1.4.1.6527.3.1.2.6.7.1.39
The value of vRtrMplsGenIssuMplsLockdown indicates if MPLS has entered the state of not accepting new requests for creation of LSP's(local/transit) during the minor ISSU(In Service Software Update) operation.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsGeneralStatTable		1.3.6.1.4.1.6527.3.1.2.6.8
The vRtrMplsGeneralStatTable contains statistics for an MPLS protocol instance within a virtual router.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsGeneralStatEntry

vRtrMplsGeneralStatEntry		1.3.6.1.4.1.6527.3.1.2.6.8.1
Each row entry represents a collection of statistics for an instance of the MPLS protocol running within a virtual router. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsGeneralStatEntry

vRtrMplsGeneralStaticLspOriginate		1.3.6.1.4.1.6527.3.1.2.6.8.1.1
The value of vRtrMplsGeneralStaticLspOriginate indicates the number of static LSPs that originate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralStaticLspTransit		1.3.6.1.4.1.6527.3.1.2.6.8.1.2
The value of vRtrMplsGeneralStaticLspTransit indicates the number of static LSPs that transit through this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralStaticLspTerminate		1.3.6.1.4.1.6527.3.1.2.6.8.1.3
The value of vRtrMplsGeneralStaticLspTerminate indicates the number of static LSPs that terminate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralDynamicLspOriginate		1.3.6.1.4.1.6527.3.1.2.6.8.1.4
The value of vRtrMplsGeneralDynamicLspOriginate indicates the number of dynamic LSPs that originate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralDynamicLspTransit		1.3.6.1.4.1.6527.3.1.2.6.8.1.5
The value of vRtrMplsGeneralDynamicLspTransit indicates the number of dynamic LSPs that transit through this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralDynamicLspTerminate		1.3.6.1.4.1.6527.3.1.2.6.8.1.6
The value of vRtrMplsGeneralDynamicLspTerminate indicates the number of dynamic LSPs that terminate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralDetourLspOriginate		1.3.6.1.4.1.6527.3.1.2.6.8.1.7
The value of vRtrMplsGeneralDetourLspOriginate indicates the number of detour LSPs that originate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralDetourLspTransit		1.3.6.1.4.1.6527.3.1.2.6.8.1.8
The value of vRtrMplsGeneralDetourLspTransit indicates the number of detour LSPs that transit through this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralDetourLspTerminate		1.3.6.1.4.1.6527.3.1.2.6.8.1.9
The value of vRtrMplsGeneralDetourLspTerminate indicates the number of detour LSPs that terminate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralS2lOriginate		1.3.6.1.4.1.6527.3.1.2.6.8.1.10
The value of vRtrMplsGeneralS2lOriginate indicates the number of source to leaf (S2L) sub LSP path called as S2L here that originate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralS2lTransit		1.3.6.1.4.1.6527.3.1.2.6.8.1.11
The value of vRtrMplsGeneralS2lOriginate indicates the number of S2Ls that transit through this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralS2lTerminate		1.3.6.1.4.1.6527.3.1.2.6.8.1.12
The value of vRtrMplsGeneralS2lOriginate indicates the number of S2Ls that terminate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGeneralLspEgrStatCount		1.3.6.1.4.1.6527.3.1.2.6.8.1.13
The value of vRtrMplsGeneralLspEgrStatCount indicates the number of LSP egress statistics configured on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsGeneralLspIgrStatCount		1.3.6.1.4.1.6527.3.1.2.6.8.1.14
The value of vRtrMplsGeneralLspIgrStatCount indicates the number of LSP ingress statistics configured on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsGenMplsTpLspOriginate		1.3.6.1.4.1.6527.3.1.2.6.8.1.15
The value of vRtrMplsGenMplsTpLspOriginate indicates the number of MPLS TP LSPs that originate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGenMplsTpLspTransit		1.3.6.1.4.1.6527.3.1.2.6.8.1.16
The value of vRtrMplsGenMplsTpLspTransit indicates the number of MPLS TP LSPs that transit through this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGenMplsTpLspTerminate		1.3.6.1.4.1.6527.3.1.2.6.8.1.17
The value of vRtrMplsGenMplsTpLspTerminate indicates the number of MPLS TP LSPs that terminate at this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGenMplsTpOrigPathInst		1.3.6.1.4.1.6527.3.1.2.6.8.1.18
The value of vRtrMplsGenMplsTpOrigPathInst indicates the number of MPLS TP LSPs originate path instances.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGenMplsTpTranPathInst		1.3.6.1.4.1.6527.3.1.2.6.8.1.19
The value of vRtrMplsGenMplsTpTranPathInst indicates the number of MPLS TP LSPs transit path instances.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsGenMplsTpTermPathInst		1.3.6.1.4.1.6527.3.1.2.6.8.1.20
The value of vRtrMplsGenMplsTpTermPathInst indicates the number of MPLS TP LSPs terminated path instances.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsIfTable		1.3.6.1.4.1.6527.3.1.2.6.9
The vRtrMplsIfTable has an entry for each router interface configured for MPLS in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsIfEntry

vRtrMplsIfEntry		1.3.6.1.4.1.6527.3.1.2.6.9.1
Each row entry represents an interface on this virtual router that participates in the MPLS protocol. A row cannot be created or deleted via SNMP SET requests. A row with default attribute values is created by setting the vRtrIfEntry attribute, vRtrIfMplsStatus, to 'create'. A row is removed if vRtrIfMplsStatus is set to 'delete'. However, an attempt to destroy a row will fail if vRtrMplsIfAdminState has not first been set to 'outOfService'.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsIfEntry

vRtrMplsIfAdminState		1.3.6.1.4.1.6527.3.1.2.6.9.1.1
The desired administrative state for the MPLS protocol running on this MPLS interface.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsIfOperState		1.3.6.1.4.1.6527.3.1.2.6.9.1.2
This variable indicates the current status of the MPLS protocol running on this MPLS interface. When the TIMETRA-VRTR-MIB::vRtrIfPortID object of this interface is set to a loopback port identifier, the operational state is not relevant and an SNMP GET request on this object will return 'unknown'.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrMplsIfAdminGroup		1.3.6.1.4.1.6527.3.1.2.6.9.1.3
The value of vRtrMplsIfAdminGroup is a bit-map that identifies the admin groups to which the interface belongs. If bit 'n' is set, then the interface belongs to the admin group with value 'n'. By default, the interface does not belong to any admin groups.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsIfTeMetric		1.3.6.1.4.1.6527.3.1.2.6.9.1.4
The value of vRtrMplsIfTeMetric specifies the traffic engineering metric for this interface. The TE metric is exchanged in addition to the IGP metric by the IGPs. Depending on the value configured for vRtrMplsLspCspfTeMetricEnabled, either the TE metric or the native IGP metric is used in CSPF computations of the LSP paths. The maximum value that can be configured is a 24 bit value.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 1..16777215

vRtrMplsIfStatTable		1.3.6.1.4.1.6527.3.1.2.6.10
The vRtrMplsIfStatTable has an entry for each router interface configured for MPLS in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsIfStatEntry

vRtrMplsIfStatEntry		1.3.6.1.4.1.6527.3.1.2.6.10.1
Each row entry represents a collection of statistics for an interface on this virtual router that participates in the MPLS protocol. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsIfStatEntry

vRtrMplsIfTxPktCount		1.3.6.1.4.1.6527.3.1.2.6.10.1.1
The total number of MPLS labeled packets transmitted from this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsIfRxPktCount		1.3.6.1.4.1.6527.3.1.2.6.10.1.2
The total number of MPLS labeled packets received on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsIfTxOctetCount		1.3.6.1.4.1.6527.3.1.2.6.10.1.3
The total number of bytes in MPLS labeled packets transmitted on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsIfRxOctetCount		1.3.6.1.4.1.6527.3.1.2.6.10.1.4
The total number of bytes in MPLS labeled packets received on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsTunnelARHopTable		1.3.6.1.4.1.6527.3.1.2.6.11
The vRtrMplsTunnelARHopTable augments the mplsTunnelARHopEntry in the MPLS-TE-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsTunnelARHopEntry

vRtrMplsTunnelARHopEntry		1.3.6.1.4.1.6527.3.1.2.6.11.1
A row entry in this table corresponds to a row entry in the mplsTunnelARHopTable and adds to the information contained in that table
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsTunnelARHopEntry

vRtrMplsTunnelARHopProtection		1.3.6.1.4.1.6527.3.1.2.6.11.1.1
If the 'localAvailable' bit is set, it indicates that the link downstream of this node has been protected by means of a local repair mechanism. This mechanism can be either the one-to-one backup method or the facility backup method. If the 'localInUse' bit is set, then it indicates that the local protection mechanism is being used to maintain this tunnel. If the 'bandwidthProtected' bit is set, then it indicates that the backup path is guaranteed to provide the desired bandwidth. If the 'nodeProtected' bit is set, then it indicates that the backup path provides protection against the failure of the next LSR along the LSP. If the 'nodeId' bit is set, it indicates that the address specified in the Record Route Object's IPv4 or IPv6 sub-object is a node-id address.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	localAvailable(0), localInUse(1), bandwidthProtected(2), nodeProtected(3), preemptionPending(4), nodeId(5)

vRtrMplsTunnelARHopRecordLabel		1.3.6.1.4.1.6527.3.1.2.6.11.1.2
If label recording is enabled, vRtrMplsTunnelARHopRecordLabel specifies the label that is advertised to the previous hop in the hop list. If label recording is disabled, vRtrMplsTunnelARHopRecordLabel will have a value of 4294967295
Status: current	Access: read-only
OBJECT-TYPE
	MplsLabel

vRtrMplsTunnelARHopRouterId		1.3.6.1.4.1.6527.3.1.2.6.11.1.3
vRtrMplsTunnelARHopRouterId specifies the router ID of the node corresponding to this hop.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

vRtrMplsTunnelCHopTable		1.3.6.1.4.1.6527.3.1.2.6.12
The vRtrMplsTunnelCHopTable is used to hold the CSPF path for a detour LSP. Each entry indicates a single hop. Primary index is the vRtrMplsTunnelCHopListIndex which associates multiple entries (hops) in the vRtrMplsTunnelCHopTable to a single mplsTunnelEntry specified in the mplsTunnelTable. The first row in the table is the first hop after the origination point of the tunnel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsTunnelCHopEntry

vRtrMplsTunnelCHopEntry		1.3.6.1.4.1.6527.3.1.2.6.12.1
An entry in this table represents a CSPF tunnel hop. Entries are created and deleted by the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsTunnelCHopEntry

vRtrMplsTunnelCHopListIndex		1.3.6.1.4.1.6527.3.1.2.6.12.1.1
Primary index into this table identifying a particular explicit route object.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

vRtrMplsTunnelCHopIndex		1.3.6.1.4.1.6527.3.1.2.6.12.1.2
Secondary index into this table identifying a particular hop.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

vRtrMplsTunnelCHopAddrType		1.3.6.1.4.1.6527.3.1.2.6.12.1.3
Denotes the address type of this tunnel hop.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ipV4(1), ipV6(2), asNumber(3), lspid(4)

vRtrMplsTunnelCHopIpv4Addr		1.3.6.1.4.1.6527.3.1.2.6.12.1.4
If vRtrMplsTunnelCHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should contain a value of 0.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

vRtrMplsTunnelCHopIpv4PrefixLen		1.3.6.1.4.1.6527.3.1.2.6.12.1.5
If vRtrMplsTunnelCHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of 0.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

vRtrMplsTunnelCHopIpv6Addr		1.3.6.1.4.1.6527.3.1.2.6.12.1.6
If the vRtrMplsTunnelCHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should contain a value of 0.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

vRtrMplsTunnelCHopIpv6PrefixLen		1.3.6.1.4.1.6527.3.1.2.6.12.1.7
If vRtrMplsTunnelCHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a value of 0.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..128

vRtrMplsTunnelCHopAsNumber		1.3.6.1.4.1.6527.3.1.2.6.12.1.8
If vRtrMplsTunnelCHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

vRtrMplsTunnelCHopLspId		1.3.6.1.4.1.6527.3.1.2.6.12.1.9
If vRtrMplsTunnelCHopAddrType is set to lspid(4), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
Status: current	Access: read-only
OBJECT-TYPE
	MplsLSPID

vRtrMplsTunnelCHopStrictOrLoose		1.3.6.1.4.1.6527.3.1.2.6.12.1.10
Denotes whether this tunnel hop is routed in a strict or loose fashion.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	strict(1), loose(2)

vRtrMplsAdminGroupTable		1.3.6.1.4.1.6527.3.1.2.6.13
The vRtrMplsAdminGroupTable has an entry for each administrative group configured for the virtual router in the system. Administrative groups are resource constructs that define a link color or resource class. They provide the ability to classify network resources (links) into groups or colors based on zones, geographic location, link location, etc. By doing so, network administrators are able to do more granular traffic engineering of LSPs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsAdminGroupEntry

vRtrMplsAdminGroupEntry		1.3.6.1.4.1.6527.3.1.2.6.13.1
Each row entry in the vRtrMplsAdminGroupTable represents an administrative group which is simply a mapping between a group name (an ASCII string) and a group value (a number in the range 0 to 31). Entries in this table are created and deleted via SNMP SET operations. An entry is created by setting the value of vRtrMplsAdminGroupRowStatus to 'createAndWait'. The row status for this entry can be set to active only once the value of vRtrMplsAdminGroupValue has been set to a valid number in the range 0 to 31. The entry is destroyed when vRtrMplsAdminGroupRowStatus is set to 'destroy'.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsAdminGroupEntry

vRtrMplsAdminGroupName		1.3.6.1.4.1.6527.3.1.2.6.13.1.1
The value of vRtrMplsAdminGroupName uniquely identifies the name of the administrative group within a virtual router instance.
Status: current	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsAdminGroupRowStatus		1.3.6.1.4.1.6527.3.1.2.6.13.1.2
vRtrMplsAdminGroupRowStatus is used to create, delete or control entries in the vRtrMplsAdminGroupTable. To create a row entry, the row status should be set to 'createAndWait'. Before the row can be placed into the 'active' state, vRtrMplsAdminGroupValue must be set to a value between 0 and 31. To delete a row entry, the row status should be set to 'destroy'
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsAdminGroupValue		1.3.6.1.4.1.6527.3.1.2.6.13.1.3
The value of vRtrMplsAdminGroupValue specifies the group value associated with this administrative group. This value is unique within a virtual router instance. A value of -1 indicates that the group value for this entry has not been set.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1 | 0..31

vRtrMplsFSGroupTable		1.3.6.1.4.1.6527.3.1.2.6.14
The vRtrMplsFSGroupTable has an entry for each group that is a part of the fate sharing database configured for the virtual router in the system. A fate sharing group is used to define a group of links and nodes in the network that share common risk attributes. To minimize a single point of failure, backup paths can be created that not only avoid the nodes and links of the primary path but also any other nodes and links that share risk with the nodes and links of the primary path.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsFSGroupEntry

vRtrMplsFSGroupEntry		1.3.6.1.4.1.6527.3.1.2.6.14.1
Each row entry in the vRtrMplsFSGroupTable represents a fate sharing group which is a database of nodes and links that share common risk attributes. Entries in this table are created and deleted via SNMP SET operations. An entry is created by setting the value of vRtrMplsFSGroupRowStatus to 'createAndGo'. An entry can be deleted by setting vRtrMplsFSGroupRowStatus to 'destroy'.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VRtrMplsFSGroupEntry

vRtrMplsFSGroupName		1.3.6.1.4.1.6527.3.1.2.6.14.1.1
The value of vRtrMplsFSGroupName uniquely identifies the name of the fate sharing group within a virtual router instance.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsFSGroupRowStatus		1.3.6.1.4.1.6527.3.1.2.6.14.1.2
vRtrMplsFSGroupRowStatus is used to create, delete or control entries in the vRtrMplsFSGroupTable. To create a row entry, the row status should be set to 'createAndGo'. To delete a row entry, the row status should be set to 'destroy'
Status: obsolete	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsFSGroupCost		1.3.6.1.4.1.6527.3.1.2.6.14.1.3
The value of vRtrMplsFSGroupCost specifies the cost assigned to the fate sharing group. This cost is applied to all nodes and links that are part of this group and used for CSPF calculations. The higher the cost of the node or link, the lesser its chance of being selected as part of the path.
Status: obsolete	Access: read-create
OBJECT-TYPE
	Unsigned32	1..65535

vRtrMplsFSGroupParamsTable		1.3.6.1.4.1.6527.3.1.2.6.15
The vRtrMplsFSGroupParamsTable has an entry for each node or link that is part of a fate sharing group on this virtual router.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsFSGroupParamsEntry

vRtrMplsFSGroupParamsEntry		1.3.6.1.4.1.6527.3.1.2.6.15.1
Each row entry in the vRtrMplsFSGroupParamsTable represents either a node or a link that is a part of a fate sharing group defined in the vRtrMplsFSGroupTable. Entries in this table are created and deleted via SNMP SET operations. An entry is created by setting the value of vRtrMplsFSGroupParamsRowStatus to 'createAndGo'. An entry can be deleted by setting vRtrMplsFSGroupParamsRowStatus to 'destroy'. To configure a node to be part of the group, create an entry in this table with vRtrMplsFSGroupParamsFromAddr set to a valid non-zero IP address and vRtrMplsFSGroupParamsToAddr set to 0. To configure a link to be part of the group, create an entry in this table with both vRtrMplsFSGroupParamsFromAddr and vRtrMplsFSGroupParamsToAddr set to valid non-zero IP addresses.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VRtrMplsFSGroupParamsEntry

vRtrMplsFSGroupParamsFromAddr		1.3.6.1.4.1.6527.3.1.2.6.15.1.1
The value of vRtrMplsFSGroupParamsFromAddr along with the value of vRtrMplsFSGroupParamsToAddr uniquely identifies a link or node within a fate sharing group. This value must be non-zero for all row entries whether it represents a node or a link.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrMplsFSGroupParamsToAddr		1.3.6.1.4.1.6527.3.1.2.6.15.1.2
The value of vRtrMplsFSGroupParamsToAddr along with the value of vRtrMplsFSGroupParamsFromAddr uniquely identifies a link or node within a fate sharing group. This value must be 0 for row entries that represent a node and must be non-zero for row entries that represent a link.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrMplsFSGroupParamsRowStatus		1.3.6.1.4.1.6527.3.1.2.6.15.1.3
vRtrMplsFSGroupParamsRowStatus is used to create, delete or control entries in the vRtrMplsFSGroupParamsTable. To create a row entry, the row status should be set to 'createAndGo'. To delete a row entry, the row status should be set to 'destroy'
Status: obsolete	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsLabelRangeTable		1.3.6.1.4.1.6527.3.1.2.6.17
The vRtrMplsLabelRangeTable has an entry for each type of label, the minimum and maximum value in the label range and information on total available and aging labels in each range. This is a read-only table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLabelRangeEntry

vRtrMplsLabelRangeEntry		1.3.6.1.4.1.6527.3.1.2.6.17.1
Each row entry in the vRtrMplsLabelRangeTable represents a type of label. Each entry contains the label range used by that label type and the number of aging and allocated labels in the range.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLabelRangeEntry

vRtrMplsLabelType		1.3.6.1.4.1.6527.3.1.2.6.17.1.1
The value of vRtrMplsLabelType specifies the type of label and is the index for this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	staticLsp(1), staticSvc(2), dynamic(3)

vRtrMplsLabelRangeMin		1.3.6.1.4.1.6527.3.1.2.6.17.1.2
The value of vRtrMplsLabelRangeMin specifies the minimum label value in the range for a particular label type.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLabelRangeMax		1.3.6.1.4.1.6527.3.1.2.6.17.1.3
The value of vRtrMplsLabelRangeMax specifies the maximum label value in the range for a particular label type.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLabelRangeAging		1.3.6.1.4.1.6527.3.1.2.6.17.1.4
The value of vRtrMplsLabelRangeAging represents the number of labels that are currently allocated and aging.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLabelRangeAvailable		1.3.6.1.4.1.6527.3.1.2.6.17.1.5
The value of vRtrMplsLabelRangeAvailable represents the number of labels that are currently available for each label type.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsStaticLSPLabelTable		1.3.6.1.4.1.6527.3.1.2.6.18
The vRtrMplsStaticLSPLabelTable has an entry for each allocated label that is part of the static LSP label range. This is a read-only table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsStaticLSPLabelEntry

vRtrMplsStaticLSPLabelEntry		1.3.6.1.4.1.6527.3.1.2.6.18.1
Each row entry in the vRtrMplsStaticLSPLabelTable represents a label of type static LSP that is currently allocated. The entry includes information about the current owner for that label.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsStaticLSPLabelEntry

vRtrMplsStaticLSPLabel		1.3.6.1.4.1.6527.3.1.2.6.18.1.1
The value of vRtrMplsStaticLSPLabel specifies the label value for a static LSP. The range of vRtrMplsStaticLSPLabel is dynamic and depends on the value of vRtrMplsLabelMaxStaticLspLabels. If vRtrMplsLabelMaxStaticLspLabels is 0, static LSP labels cannot be configured. If vRtrMplsLabelMaxStaticLspLabels is 1, vRtrMplsStaticLSPLabel can only be 32. The normal range of vRtrMplsStaticLSPLabel starts at 32 and ends at the value of vRtrMplsLabelMaxStaticLspLabels.
Status: current	Access: not-accessible
OBJECT-TYPE
	MplsLabel	32..262112

vRtrMplsStaticLSPLabelOwner		1.3.6.1.4.1.6527.3.1.2.6.18.1.2
The value of vRtrMplsStaticLSPLabelOwner specifies the owner for the label value vRtrMplsStaticLSPLabel.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLabelOwner

vRtrMplsStaticSvcLabelTable		1.3.6.1.4.1.6527.3.1.2.6.19
The vRtrMplsStaticSvcLabelTable has an entry for each allocated label that is part of the static service label range. This is a read-only table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsStaticSvcLabelEntry

vRtrMplsStaticSvcLabelEntry		1.3.6.1.4.1.6527.3.1.2.6.19.1
Each row entry in the vRtrMplsStaticSvcLabelTable represents a label of type static-svc that is currently allocated. The entry includes information about the current owner for that label.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsStaticSvcLabelEntry

vRtrMplsStaticSvcLabel		1.3.6.1.4.1.6527.3.1.2.6.19.1.1
The value of vRtrMplsStaticSvcLabel specifies the label value for a static SVC. The range of vRtrMplsStaticSvcLabel is dynamic and depends on the value of vRtrMplsLabelMaxStaticLspLabels and vRtrMplsLabelMaxStaticSvcLabels. If vRtrMplsLabelMaxStaticSvcLabels is 0, static SVC labels cannot be configured. The range for vRtrMplsStaticSvcLabel starts at 32 + vRtrMplsLabelMaxStaticLspLabels and ends at 32 + vRtrMplsLabelMaxStaticSvcLabels + vRtrMplsLabelMaxStaticSvcLabels.
Status: current	Access: not-accessible
OBJECT-TYPE
	MplsLabel	32..262112

vRtrMplsStaticSvcLabelOwner		1.3.6.1.4.1.6527.3.1.2.6.19.1.2
The value of vRtrMplsStaticSvcLabelOwner specifies the owner for the label value vRtrMplsStaticSvcLabel.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLabelOwner

vRtrMplsSrlgGrpTableLastChanged		1.3.6.1.4.1.6527.3.1.2.6.20
The value of vRtrMplsSrlgGrpTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsSrlgGrpTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsSrlgGrpTable		1.3.6.1.4.1.6527.3.1.2.6.21
The vRtrMplsSrlgGrpTable has an entry for each Shared Risk Link Groups (SRLG) group configured for MPLS in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsSrlgGrpEntry

vRtrMplsSrlgGrpEntry		1.3.6.1.4.1.6527.3.1.2.6.21.1
Each row entry represents a SRLG group on this virtual router that participates in the MPLS protocol. A row can be created or deleted via SNMP SET requests.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsSrlgGrpEntry

vRtrMplsSrlgGrpName		1.3.6.1.4.1.6527.3.1.2.6.21.1.1
The value of vRtrMplsSrlgGrpName indicates the SRLG group name.
Status: current	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsSrlgGrpRowStatus		1.3.6.1.4.1.6527.3.1.2.6.21.1.2
vRtrMplsSrlgGrpRowStatus is used to create, delete or control entries in the vRtrMplsSrlgGrpTable. A value must also be set for vRtrMplsSrlgGrpValue before the row entry can transition to the 'active' state.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsSrlgGrpLastChanged		1.3.6.1.4.1.6527.3.1.2.6.21.1.3
The value of vRtrMplsSrlgGrpLastChanged indicates the timestamp of last change to this row in vRtrMplsSrlgGrpTable.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsSrlgGrpValue		1.3.6.1.4.1.6527.3.1.2.6.21.1.4
The value of vRtrMplsSrlgGrpValue specifies the group value associated with vRtrMplsSrlgGrpName. This value is unique within a virtual router instance. At the time of row creation, a value for vRtrMplsSrlgGrpValue must be specified or else row creation would fail.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsIfSrlgGrpTblLastChanged		1.3.6.1.4.1.6527.3.1.2.6.22
The value of vRtrMplsIfSrlgGrpTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsIfSrlgGrpTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsIfSrlgGrpTable		1.3.6.1.4.1.6527.3.1.2.6.23
The vRtrMplsIfSrlgGrpTable has an entry for each Shared Risk Link Group (SRLG) groups associated with a router interface configured for MPLS in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsIfSrlgGrpEntry

vRtrMplsIfSrlgGrpEntry		1.3.6.1.4.1.6527.3.1.2.6.23.1
Each row entry represents an SRLG group associated with a interface on this virtual router that participates in the MPLS protocol. A row can be created or deleted via SNMP SET requests.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsIfSrlgGrpEntry

vRtrMplsIfSrlgGrpName		1.3.6.1.4.1.6527.3.1.2.6.23.1.1
The value of vRtrMplsIfSrlgGrpName indicates the SRLG group name.
Status: current	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsIfSrlgGrpRowStatus		1.3.6.1.4.1.6527.3.1.2.6.23.1.2
vRtrMplsIfSrlgGrpRowStatus is used to create, delete or control entries in the vRtrMplsIfSrlgGrpTable.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsIfSrlgGrpLastChanged		1.3.6.1.4.1.6527.3.1.2.6.23.1.3
The value of vRtrMplsIfSrlgGrpLastChanged indicates the timestamp of last change to this row in vRtrMplsIfSrlgGrpTable.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsP2mpInstTblLastChanged		1.3.6.1.4.1.6527.3.1.2.6.24
The value of vRtrMplsP2mpInstTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsP2mpInstTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsP2mpInstTable		1.3.6.1.4.1.6527.3.1.2.6.25
vRtrMplsP2mpInstTable contains configuration information for the Mpls Point to Multipoint (P2MP) Instance on a virtual router.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsP2mpInstEntry

vRtrMplsP2mpInstEntry		1.3.6.1.4.1.6527.3.1.2.6.25.1
vRtrMplsP2mpInstEntry is an entry (conceptual row) in the vRtrMplsP2mpInstTable. Each entry represents the configuration for a Mpls Point to Multipoint (P2MP) Instance. Entries in this table can be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsP2mpInstEntry

vRtrMplsP2mpInstIndex		1.3.6.1.4.1.6527.3.1.2.6.25.1.1
The unique value which identifies this Point to Multipoint Labeled Switch Path (P2MP LSP) for this virtual router in the Alcatel-Lucent SROS system. It is a unique value among entries with the same value of vRtrID.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxVRtrMplsLspID

vRtrMplsP2mpInstRowStatus		1.3.6.1.4.1.6527.3.1.2.6.25.1.2
vRtrMplsP2mpInstRowStatus is used to create, delete or control entries in the vRtrMplsP2mpInstTable.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsP2mpInstLastChange		1.3.6.1.4.1.6527.3.1.2.6.25.1.3
The value of vRtrMplsP2mpInstLastChange indicates the timestamp of last change to this row in vRtrMplsP2mpInstTable.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsP2mpInstName		1.3.6.1.4.1.6527.3.1.2.6.25.1.4
The value of vRtrMplsP2mpInstName specifies the administrative name for the P2MP instance which must be unique within a virtual router instance.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrMplsP2mpInstType		1.3.6.1.4.1.6527.3.1.2.6.25.1.5
The value of vRtrMplsP2mpInstType specifies the type of P2MP LSP instance.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), primary(2)

vRtrMplsP2mpInstProperties		1.3.6.1.4.1.6527.3.1.2.6.25.1.6
The value of vRtrMplsP2mpInstProperties indicates the set of configured properties for this path expressed as a bit map. For example, if the path is an adaptive path, the bit corresponding to bit value 1 is set.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	recordRoute(0), adaptive(1), cspf(2), mergeable(3), fastReroute(4)

vRtrMplsP2mpInstBandwidth		1.3.6.1.4.1.6527.3.1.2.6.25.1.7
The value of vRtrMplsP2mpInstBandwidth specifies the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the P2MP LSP.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstState		1.3.6.1.4.1.6527.3.1.2.6.25.1.8
The value of vRtrMplsP2mpInstState indicates the current working state of this path within this P2MP LSP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), active(2), inactive(3)

vRtrMplsP2mpInstSetupPriority		1.3.6.1.4.1.6527.3.1.2.6.25.1.9
The value of vRtrMplsP2mpInstSetupPriority indicates the setup priority to use when insufficient bandwidth is available to setup a P2MP LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this P2MP LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the vRtrMplsP2mpInstHopLimit bit in vRtrMplsP2mpInstInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsP2mpInstHoldPriority		1.3.6.1.4.1.6527.3.1.2.6.25.1.10
The value of vRtrMplsP2mpInstHoldPriority indicates the hold priority to use when insufficient bandwidth is available to setup a P2MP LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this P2MP LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the vRtrMplsP2mpInstHopLimit bit in vRtrMplsP2mpInstInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsP2mpInstRecord		1.3.6.1.4.1.6527.3.1.2.6.25.1.11
The value of vRtrMplsP2mpInstRecord specifies whether recording of all hops that a P2MP LSP traverses is enabled. When the value of vRtrMplsP2mpInstRecord is 'true', recording of all the hops that a P2MP LSP traverses is enabled. When the value of vRtrMplsP2mpInstRecord is 'false, recording of all the hops that a P2MP LSP traverses is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsP2mpInstHopLimit		1.3.6.1.4.1.6527.3.1.2.6.25.1.12
The value of vRtrMplsP2mpInstHopLimit specifies the maximum number of hops that a P2MP LSP will traverse including the ingress and egress ESRs. A P2MP LSP will not be setup if the hop limit is exceeded. When the vRtrMplsP2mpInstHopLimit bit in vRtrMplsP2mpInstInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	2..255

vRtrMplsP2mpInstAdminState		1.3.6.1.4.1.6527.3.1.2.6.25.1.13
The value of vRtrMplsP2mpInstAdminState specifies desired administrative state for this P2MP LSP.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsP2mpInstOperState		1.3.6.1.4.1.6527.3.1.2.6.25.1.14
The value of vRtrMplsP2mpInstOperState indicates the current operational state of this P2MP LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrMplsP2mpInstInheritance		1.3.6.1.4.1.6527.3.1.2.6.25.1.15
The value of vRtrMplsP2mpInstInheritance specifies whether or not each writable object in this row inherits its value from its corresponding object in the vRtrMplsLspTable. This object controls whether to inherit the operational value of that associated object, or use the administrative value configured in this row. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. This object is a bit-mask, with the following positions: vRtrMplsP2mpInstHopLimit 0x40 vRtrMplsP2mpInstAdminGrpInclude 0x200 vRtrMplsP2mpInstAdminGrpExclude 0x400 vRtrMplsP2mpInstAdaptive 0x800 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. The corresponding mask bit will be changed to one when SNMP SET is performed on any of the inherited objects (vRtrMplsP2mpInstHopLimit, vRtrMplsP2mpInstAdminGrpInclude, etc). When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsLspTable.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstLspId		1.3.6.1.4.1.6527.3.1.2.6.25.1.16
The value of vRtrMplsP2mpInstLspId indicates the value which identifies the label switched path that is signaled for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	MplsLSPID

vRtrMplsP2mpInstNegotiatedMTU		1.3.6.1.4.1.6527.3.1.2.6.25.1.17
The value of vRtrMplsP2mpInstNegotiatedMTU indicates the size for the Maximum transmission unit (MTU) that is negotiated during establishment of this P2MP LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstFailCode		1.3.6.1.4.1.6527.3.1.2.6.25.1.18
The value of vRtrMplsP2mpInstFailCode indicates the reason code for P2MP LSP Path failure. A value of 0 indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsP2mpInstFailNodeArType		1.3.6.1.4.1.6527.3.1.2.6.25.1.19
The value of vRtrMplsP2mpInstFailNodeArType indicates the type of vRtrMplsP2mpInstFailNodeAddr. When no failure has occurred, vRtrMplsP2mpInstFailNodeArType is 0.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

vRtrMplsP2mpInstFailNodeAddr		1.3.6.1.4.1.6527.3.1.2.6.25.1.20
The value of vRtrMplsP2mpInstFailNodeAddr indicates the IP address of the node in the P2MP LSP path at which the P2MP LSP path failed.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsP2mpInstAdminGrpInclude		1.3.6.1.4.1.6527.3.1.2.6.25.1.21
The value of vRtrMplsP2mpInstAdminGrpInclude is a bit-map that specifies a list of admin groups that should be included when this P2MP LSP is setup. If bit 'n' is set, then the admin group with value 'n' is included for this P2MP LSP. This implies that each link that this P2MP LSP goes through must be associated with at least one of the admin groups in the include list. By default, all admin groups are in the include list.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstAdminGrpExclude		1.3.6.1.4.1.6527.3.1.2.6.25.1.22
The value of vRtrMplsP2mpInstAdminGrpExclude is a bit-map that specifies a list of admin groups that should be excluded when this P2MP LSP is setup. If bit 'n' is set, then the admin group with value 'n' is excluded for this P2MP LSP. This implies that each link that this P2MP LSP goes through must not be associated with any of the admin groups in the exclude list. By default, no admin groups are in the exclude list.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstAdaptive		1.3.6.1.4.1.6527.3.1.2.6.25.1.23
The value of vRtrMplsP2mpInstAdaptive specifies whether make-before-break functionality is enabled. If the value of vRtrMplsP2mpInstAdaptive is set to 'true', it enables make-before-break functionality for the P2MP LSP. When the attributes of an already established P2MP LSP are changed, either through manual configuration or due to a change in network topology, make-before-break functionality ensures that the resources of the existing P2MP LSP will not be released until a new path (with the same P2MP LSP Id) has been established and traffic flowing over the existing path is seamlessly transferred to the new path. If the value of vRtrMplsP2mpInstAdaptive is set to 'false', it disables make-before-break functionality.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsP2mpInstOperBandwidth		1.3.6.1.4.1.6527.3.1.2.6.25.1.24
The value of vRtrMplsP2mpInstOperBandwidth indicates the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserved for the operational P2MP LSP path. When make-before-break functionality for the P2MP LSP is enabled and if the path bandwidth is changed, the resources allocated to the existing P2MP LSP paths will not be released until a new path with the new bandwidth settings has been established. While a new path is being signaled, the administrative value and the operational values of the path bandwidth may differ. The value of vRtrMplsP2mpInstBandwidth specifies the bandwidth requirements for the new P2MP LSP path trying to be established whereas the value of vRtrMplsP2mpInstOperBandwidth specifies the bandwidth reserved for the existing P2MP LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsP2mpInstResignal		1.3.6.1.4.1.6527.3.1.2.6.25.1.25
Setting the value of vRtrMplsP2mpInstResignal to 'doAction' triggers the re-signaling of the P2MP LSP path. If the P2MP LSP path is operationally down either due to network failure or due to the retry attempts count being exceeded, setting this variable to 'doAction' will initiate the signaling for the path. A make-before-break signaling for the path will be initiated if the P2MP LSP is operationally up but the make-before-break retry attempts count was exceeded. Make-before-break signaling will also be initiated for any P2MP LSP that is operationally up. This may be used to cause a loose-hop P2MP LSP to be optimized. If a re-signal is triggered while a re-signaling is already in progress, the old transient state will be destroyed and a new transaction being triggered. An SNMP GET request on this object should return 'notApplicable'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxActionType

vRtrMplsP2mpInstOperMTU		1.3.6.1.4.1.6527.3.1.2.6.25.1.26
The value of vRtrMplsP2mpInstOperMTU indicates the size for the Maximum transmission unit (MTU) that is currently in operation for this P2MP LSP Path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstRecordLabel		1.3.6.1.4.1.6527.3.1.2.6.25.1.27
The value of vRtrMplsP2mpInstRecordLabel specifies when the value of vRtrMplsP2mpInstRecordLabel is 'record', recording of labels at each node that a P2MP LSP traverses is enabled. When the value of vRtrMplsP2mpInstRecordLabel is 'noRecord', recording of labels at each node that a P2MP LSP traverses is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	record(1), noRecord(2)

vRtrMplsP2mpInstLastResigAttpt		1.3.6.1.4.1.6527.3.1.2.6.25.1.28
The value of vRtrMplsP2mpInstLastResigAttpt indicates the sysUpTime when the last attempt to resignal this P2MP LSP was made.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsP2mpInstMetric		1.3.6.1.4.1.6527.3.1.2.6.25.1.29
The value of vRtrMplsP2mpInstMetric indicates the cost of the traffic engineered path returned by the IGP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstLastMBBType		1.3.6.1.4.1.6527.3.1.2.6.25.1.30
The value of vRtrMplsP2mpInstLastMBBType indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsMBBType

vRtrMplsP2mpInstLastMBBEnd		1.3.6.1.4.1.6527.3.1.2.6.25.1.31
The value of vRtrMplsP2mpInstLastMBBEnd indicates the sysUpTime when the last MBB ended.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsP2mpInstLastMBBMetric		1.3.6.1.4.1.6527.3.1.2.6.25.1.32
The value of vRtrMplsP2mpInstLastMBBMetric indicates the cost of the traffic engineered path for the P2MP LSP path prior to MBB.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstLastMBBState		1.3.6.1.4.1.6527.3.1.2.6.25.1.33
The value of vRtrMplsP2mpInstLastMBBState specifies whether the last Make-before-break was successful or failed. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful fail (3) - make-before-break failed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), success(2), fail(3)

vRtrMplsP2mpInstMBBTypeInProg		1.3.6.1.4.1.6527.3.1.2.6.25.1.34
The value of vRtrMplsP2mpInstMBBTypeInProg indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is in progress.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsMBBType

vRtrMplsP2mpInstMBBStarted		1.3.6.1.4.1.6527.3.1.2.6.25.1.35
The value of vRtrMplsP2mpInstMBBStarted indicates the sysUpTime when the in-progress MBB started.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsP2mpInstMBBNextRetry		1.3.6.1.4.1.6527.3.1.2.6.25.1.36
The value of vRtrMplsP2mpInstMBBNextRetry indicates the amount of time remaining in seconds before the next attempt is made to retry the in-progress MBB.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstMBBRetryAttpts		1.3.6.1.4.1.6527.3.1.2.6.25.1.37
The value of vRtrMplsP2mpInstMBBRetryAttpts indicates 'n' where nth attempt for the MBB is in progress.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsP2mpInstMBBFailCode		1.3.6.1.4.1.6527.3.1.2.6.25.1.38
The value of vRtrMplsP2mpInstMBBFailCode indicates the reason code for in-progress MBB failure. A value of 'none' indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsP2mpInstMBBFailNodeType		1.3.6.1.4.1.6527.3.1.2.6.25.1.39
The value of vRtrMplsP2mpInstMBBFailNodeType indicates the type of vRtrMplsP2mpInstMBBFailNodeAddr. A value of 'unknown' indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

vRtrMplsP2mpInstMBBFailNodeAddr		1.3.6.1.4.1.6527.3.1.2.6.25.1.40
The value of vRtrMplsP2mpInstMBBFailNodeAddr indicates the IP address of the node in the P2MP LSP path at which the in-progress MBB failed. A value of 'unknown' for vRtrMplsP2mpInstMBBFailNodeType and empty string for vRtrMplsP2mpInstMBBFailNodeAddr indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsP2mpInstStatTable		1.3.6.1.4.1.6527.3.1.2.6.26
The vRtrMplsP2mpInstStatTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsP2mpInstStatEntry

vRtrMplsP2mpInstStatEntry		1.3.6.1.4.1.6527.3.1.2.6.26.1
Each row entry represents a collection of statistics for a P2MP Labeled Switch Path (LSP) configured for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsP2mpInstStatEntry

vRtrMplsP2mpInstStatS2lChanges		1.3.6.1.4.1.6527.3.1.2.6.26.1.1
The value of vRtrMplsP2mpInstStatS2lChanges indicates the number of S2l changes this P2MP LSP has had. For every S2l change (S2l down, S2l up, S2l change), a corresponding syslog/trap (if enabled) is generated for it.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsP2mpInstStatLastS2lChange		1.3.6.1.4.1.6527.3.1.2.6.26.1.2
The value of vRtrMplsP2mpInstStatLastS2lChange indicates the time since the last change occurred on this P2MP LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsP2mpInstStatConfiguredS2ls		1.3.6.1.4.1.6527.3.1.2.6.26.1.3
The value of vRtrMplsP2mpInstStatConfiguredS2ls indicates the number of S2ls configured for this P2MP LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsP2mpInstStatOperationalS2ls		1.3.6.1.4.1.6527.3.1.2.6.26.1.4
The value of vRtrMplsP2mpInstStatOperationalS2ls indicates the number of operational S2ls for this P2MP LSP. This includes the S2ls currently active.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsP2mpInstStatLastS2lTimeUp		1.3.6.1.4.1.6527.3.1.2.6.26.1.5
The value of vRtrMplsP2mpInstStatLastS2lTimeUp indicates the total time that this S2l has been operational.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsP2mpInstStatLastS2lTimeDown		1.3.6.1.4.1.6527.3.1.2.6.26.1.6
The value of vRtrMplsP2mpInstStatLastS2lTimeDown indicates the total time that this S2l has not been operational.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsP2mpInstStatTimeUp		1.3.6.1.4.1.6527.3.1.2.6.26.1.7
The value of vRtrMplsP2mpInstStatTimeUp indicates the total time that this P2MP instance has been operational.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsP2mpInstStatTimeDown		1.3.6.1.4.1.6527.3.1.2.6.26.1.8
The value of vRtrMplsP2mpInstStatTimeDown indicates the total time that this P2MP instance has not been operational.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsP2mpInstStatTransitions		1.3.6.1.4.1.6527.3.1.2.6.26.1.9
The The value of vRtrMplsP2mpInstStatTransitions indicates the number of state transitions (up -> down and down -> up) this P2mp instance has undergone.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsP2mpInstStatLastTrans		1.3.6.1.4.1.6527.3.1.2.6.26.1.10
The value of vRtrMplsP2mpInstStatLastTrans indicates the time since the last transition occurred on this P2mp instance.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsS2lSubLspTblLastChanged		1.3.6.1.4.1.6527.3.1.2.6.27
The value of vRtrMplsS2lSubLspTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsS2lSubLspTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsS2lSubLspTable		1.3.6.1.4.1.6527.3.1.2.6.28
The vRtrMplsS2lSubLspTable provides an association between an P2MP LSP and a source to leaf (S2L) sub LSP path called as S2L here. A P2MP LSP can have more than one S2L sub LSP association.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsS2lSubLspEntry

vRtrMplsS2lSubLspEntry		1.3.6.1.4.1.6527.3.1.2.6.28.1
Each row entry represents an association between a Labeled Switch Path (P2MP LSP) in the vRtrMplsP2mpInstTable and a S2L sub LSP entry in the vRtrMplsS2lSubLspTable. Entries in this table can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires vRtrMplsS2lSubLspType to have been assigned a valid value.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsS2lSubLspEntry

vRtrMplsS2lSubLspDstAddrType		1.3.6.1.4.1.6527.3.1.2.6.28.1.1
The value of vRtrMplsS2lSubLspDstAddrType indicates the type of vRtrMplsS2lSubLspDstAddr.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrMplsS2lSubLspDstAddr		1.3.6.1.4.1.6527.3.1.2.6.28.1.2
The value of vRtrMplsS2lSubLspDstAddr indicates the IP address of the destination address of the S2L sub LSP.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsS2lSubLspRowStatus		1.3.6.1.4.1.6527.3.1.2.6.28.1.3
The value of vRtrMplsS2lSubLspRowStatus specifies row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'active' state vRtrMplsS2lSubLspType must have been assigned a valid value.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsS2lSubLspLastChange		1.3.6.1.4.1.6527.3.1.2.6.28.1.4
The value of vRtrMplsS2lSubLspRowStatus indicates the sysUpTime when this row was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsS2lSubLspType		1.3.6.1.4.1.6527.3.1.2.6.28.1.5
The value of vRtrMplsS2lSubLspRowStatus indicates the value that represents the role this S2L sub LSP is taking within this P2MP LSP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	s2lPath(1)

vRtrMplsS2lSubLspProperties		1.3.6.1.4.1.6527.3.1.2.6.28.1.6
The value of vRtrMplsS2lSubLspProperties indicates the set of configured properties. For example, if the S2L sub LSP is an adaptive S2L sub LSP, the bit corresponding to bit value 1 is set.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	recordRoute(0), adaptive(1), cspf(2), mergeable(3), fastReroute(4)

vRtrMplsS2lSubLspState		1.3.6.1.4.1.6527.3.1.2.6.28.1.7
The value of vRtrMplsS2lSubLspState indicates the current working state of this S2L sub LSP within this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), active(2), inactive(3)

vRtrMplsS2lSubLspAdminState		1.3.6.1.4.1.6527.3.1.2.6.28.1.8
The value of vRtrMplsS2lSubLspAdminState specifies the desired administrative state for this P2MP S2L sub LSP.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsS2lSubLspOperState		1.3.6.1.4.1.6527.3.1.2.6.28.1.9
The value of vRtrMplsS2lSubLspAdminState indicates the current operational state of this P2MP S2L sub LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrMplsS2lSubGroupId		1.3.6.1.4.1.6527.3.1.2.6.28.1.10
The value of vRtrMplsS2lSubGroupId indicates the value which identifies the group for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspId		1.3.6.1.4.1.6527.3.1.2.6.28.1.11
The value of vRtrMplsS2lSubLspId indicates the value which identifies the label switched path that is signaled for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	MplsLSPID

vRtrMplsS2lSubLspRetryTimeRemain		1.3.6.1.4.1.6527.3.1.2.6.28.1.12
The value of vRtrMplsS2lSubLspRetryTimeRemain indicates the time to signal this S2L sub LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspTunARHopLtIndex		1.3.6.1.4.1.6527.3.1.2.6.28.1.13
The value of vRtrMplsS2lSubLspTunARHopLtIndex indicates Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is no recored hop list associated with this P2MP LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0 | 1..2147483647

vRtrMplsS2lSubLspNegotiatedMTU		1.3.6.1.4.1.6527.3.1.2.6.28.1.14
The value of vRtrMplsS2lSubLspNegotiatedMTU indicates the size for the Maximum transmission unit (MTU) that is negotiated during establishment of this P2MP LSP Path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspFailCode		1.3.6.1.4.1.6527.3.1.2.6.28.1.15
The value of vRtrMplsS2lSubLspFailCode indicates the reason code for P2MP LSP Path failure. A value of 0 indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsS2lSubLspFailNodeArType		1.3.6.1.4.1.6527.3.1.2.6.28.1.16
The value of vRtrMplsS2lSubLspFailNodeArType indicates type of vRtrMplsS2lSubLspFailNodeAddr. When no failure has occurred, this value is 0.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

vRtrMplsS2lSubLspFailNodeAddr		1.3.6.1.4.1.6527.3.1.2.6.28.1.17
The value of vRtrMplsS2lSubLspFailNodeAddr indicates the IP address of the node in the P2MP S2L sub LSP at which the P2MP S2L sub LSP failed.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsS2lSubLspOperBandwidth		1.3.6.1.4.1.6527.3.1.2.6.28.1.18
The value of vRtrMplsS2lSubLspOperBandwidth indicates the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserved for the operational P2MP S2L sub LSP. When make-before-break functionality for the P2MP LSP is enabled and if the S2L sub LSP bandwidth is changed, the resources allocated to the existing P2MP LSP paths will not be released until a new S2L sub LSP with the new bandwidth settings has been established. While a new S2L sub LSP is being signaled, the administrative value and the operational values of the S2L sub LSP bandwidth may differ. The value of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth requirements for the new P2MP S2L sub LSP trying to be established whereas the value of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth reserved for the existing P2MP S2L sub LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrMplsS2lSubLspTunCRHopLtIndex		1.3.6.1.4.1.6527.3.1.2.6.28.1.19
The value of vRtrMplsS2lSubLspTunCRHopLtIndex indicates primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there is no computed hop list associated with this LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0 | 1..2147483647

vRtrMplsS2lSubLspOperMTU		1.3.6.1.4.1.6527.3.1.2.6.28.1.20
The value of vRtrMplsS2lSubLspOperMTU indicates the size for the Maximum transmission unit (MTU) that is currently operation for this P2MP LSP Path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspLastResigAttpt		1.3.6.1.4.1.6527.3.1.2.6.28.1.21
The value of vRtrMplsS2lSubLspLastResigAttpt indicates the sysUpTime when the last attempt to resignal this LSP was made.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsS2lSubLspLastMBBType		1.3.6.1.4.1.6527.3.1.2.6.28.1.22
The value of vRtrMplsS2lSubLspLastMBBType indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsMBBType

vRtrMplsS2lSubLspLastMBBEnd		1.3.6.1.4.1.6527.3.1.2.6.28.1.23
The value of vRtrMplsS2lSubLspLastMBBEnd indicates the sysUpTime when the last MBB ended.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsS2lSubLspLastMBBMetric		1.3.6.1.4.1.6527.3.1.2.6.28.1.24
The value of vRtrMplsS2lSubLspLastMBBMetric indicates the cost of the traffic engineered S2L sub LSP for the S2L sub LSP prior to MBB.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspLastMBBState		1.3.6.1.4.1.6527.3.1.2.6.28.1.25
The value of vRtrMplsS2lSubLspLastMBBState indicates whether the last Make-before-break was successful or failed. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful fail (3) - make-before-break failed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), success(2), fail(3)

vRtrMplsS2lSubLspMBBTypeInProg		1.3.6.1.4.1.6527.3.1.2.6.28.1.26
The value of vRtrMplsS2lSubLspMBBTypeInProg indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is in progress.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsMBBType

vRtrMplsS2lSubLspMBBStarted		1.3.6.1.4.1.6527.3.1.2.6.28.1.27
The value of vRtrMplsS2lSubLspMBBStarted indicates the sysUpTime when the in-progress MBB started.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsS2lSubLspMBBNextRetry		1.3.6.1.4.1.6527.3.1.2.6.28.1.28
The value of vRtrMplsS2lSubLspMBBNextRetry indicates the amount of time remaining in seconds before the next attempt is made to retry the in-progress MBB.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspMBBRetryAttpts		1.3.6.1.4.1.6527.3.1.2.6.28.1.29
The value of vRtrMplsS2lSubLspMBBRetryAttpts indicates 'n' where nth attempt for the MBB is in progress.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspMBBFailCode		1.3.6.1.4.1.6527.3.1.2.6.28.1.30
The value of vRtrMplsS2lSubLspMBBFailCode indicates the reason code for in-progress MBB failure. A value of 'none' indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsS2lSubLspMBBFailNodeType		1.3.6.1.4.1.6527.3.1.2.6.28.1.31
The value of vRtrMplsS2lSubLspMBBFailNodeType indicates the type of vRtrMplsS2lSubLspMBBFailNodeAddr. A value of 'unknown' indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

vRtrMplsS2lSubLspMBBFailNodeAddr		1.3.6.1.4.1.6527.3.1.2.6.28.1.32
The value of vRtrMplsS2lSubLspMBBFailNodeAddr indicates the IP address of the node in the S2L sub LSP at which the in-progress MBB failed. A value of 'unknown' for vRtrMplsS2lSubLspMBBFailNodeType and empty string for vRtrMplsS2lSubLspMBBFailNodeAddr indicates that no failure has occurred.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsS2lSubLspUpTime		1.3.6.1.4.1.6527.3.1.2.6.28.1.33
The value of vRtrMplsS2lSubLspUpTime indicates the timestamp when the S2l came up.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsS2lSubLspDownTime		1.3.6.1.4.1.6527.3.1.2.6.28.1.34
The value of vRtrMplsS2lSubLspDownTime indicates the timestamp when the S2l went down.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsS2lSubLspIsFastRetry		1.3.6.1.4.1.6527.3.1.2.6.28.1.35
The value of vRtrMplsS2lSubLspIsFastRetry indicates which retry timer is being referred to by vRtrMplsS2lSubLspRetryTimeRemain. When the value of vRtrMplsLspPathIsFastRetry is set to 'true', vRtrMplsLspPathRetryTimeRemaining is referring to the P2MP S2L path fast timer, vRtrMplsGenP2mpS2lFastRetry. When the value of vRtrMplsLspPathIsFastRetry is set to 'false', vRtrMplsS2lSubLspRetryTimeRemain is referring to the LSP retry timer, vRtrMplsLspRetryTimer.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsS2lSubLspTimeoutIn		1.3.6.1.4.1.6527.3.1.2.6.28.1.36
The value of vRtrMplsS2lSubLspTimeoutIn specifies the amount of time remaining, in seconds, for the S2L path state to time out after the initial PATH message has been sent. If the timer expires and the S2L path has not become operationally up, the S2L path is torn down and the retry timer is started to schedule a new retry cycle.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspMBBTimeoutIn		1.3.6.1.4.1.6527.3.1.2.6.28.1.37
The value of vRtrMplsS2lSubLspMBBTimeoutIn specifies the amount of time remaining, in seconds, for the in-progress S2L MBB path state to time out after the initial PATH message has been sent. If the timer expires and the in-progress S2L MBB path has not become operationally up, the S2L MBB path is torn down and the retry timer is started to schedule a new retry cycle.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsS2lSubLspStatTable		1.3.6.1.4.1.6527.3.1.2.6.29
The vRtrMplsS2lSubLspStatTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsS2lSubLspStatEntry

vRtrMplsS2lSubLspStatEntry		1.3.6.1.4.1.6527.3.1.2.6.29.1
Each row entry represents a collection of statistics for a P2MP Source to Leaf (S2L) Sub Labeled Switch Path (LSP) configured for a i virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsS2lSubLspStatEntry

vRtrMplsS2lSubLspTimeUp		1.3.6.1.4.1.6527.3.1.2.6.29.1.1
The value of vRtrMplsS2lSubLspTimeUp indicates the total time that this LSP S2l has been operational. For example, the percentage up time can be determined by computing (vRtrMplsS2lSubLspTimeUp/vRtrMplsLspAge * 100 %).
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsS2lSubLspTimeDown		1.3.6.1.4.1.6527.3.1.2.6.29.1.2
The value of vRtrMplsS2lSubLspTimeUp indicates the total time that this LSP S2l has not been operational.
Status: current	Access: read-only
OBJECT-TYPE
	TimeInterval

vRtrMplsS2lSubLspRetryAttempts		1.3.6.1.4.1.6527.3.1.2.6.29.1.3
The value of vRtrMplsS2lSubLspRetryAttempts indicates the number of unsuccessful attempts which have been made to signal this S2l. As soon as the S2l gets signalled, this is set to 0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsS2lSubLspTransitionCount		1.3.6.1.4.1.6527.3.1.2.6.29.1.4
The value of vRtrMplsS2lSubLspTransitionCount indicates the number of transitions that have occurred for this LSP.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsS2lSubLspCspfQueries		1.3.6.1.4.1.6527.3.1.2.6.29.1.5
The value of vRtrMplsS2lSubLspCspfQueries indicates the number of CSPF queries that have been made for this LSP S2l.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsSrlgDBRtrIdTblLastChg		1.3.6.1.4.1.6527.3.1.2.6.30
The value of vRtrMplsSrlgDBRtrIdTblLastChg indicates the sysUpTime at the time of the last modification to vRtrMplsSrlgDBRtrIdTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsSrlgDBRtrIdTable		1.3.6.1.4.1.6527.3.1.2.6.31
The vRtrMplsSrlgDBRtrIdTable has an entry for each router-id configured under user Shared Risk Link Group (SRLG) database. The user manually enters the SRLG membership information for any link in the network, into the user SRLG database.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsSrlgDBRtrIdEntry

vRtrMplsSrlgDBRtrIdEntry		1.3.6.1.4.1.6527.3.1.2.6.31.1
Each row entry represents a router ID under which interface entries would be configured for the SRLG database table. A row can be created or deleted via SNMP SET requests.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsSrlgDBRtrIdEntry

vRtrMplsSrlgDBRtrIdRouterID		1.3.6.1.4.1.6527.3.1.2.6.31.1.1
The value of vRtrMplsSrlgDBRtrIdRouterID specifies a 32-bit integer uniquely identifying the router in the Autonomous System. By convention to ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router. The router-id can be either the local one or some remote router.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxMplsRouterId

vRtrMplsSrlgDBRtrIdRowStatus		1.3.6.1.4.1.6527.3.1.2.6.31.1.2
vRtrMplsSrlgDBRtrIdRowStatus is used to create, delete or control entries in the vRtrMplsSrlgDBRtrIdTable.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsSrlgDBRtrIdAdminState		1.3.6.1.4.1.6527.3.1.2.6.31.1.3
The value of vRtrMplsSrlgDBRtrIdAdminState specifies the desired administrative state for the router-id entry in the vRtrMplsSrlgDBRtrIdTable.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsSrlgDBRtrIdLastChanged		1.3.6.1.4.1.6527.3.1.2.6.31.1.4
The value of vRtrMplsSrlgDBRtrIdLastChanged indicates the timestamp of last change to this row in vRtrMplsSrlgDBRtrIdTable.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsSrlgDBIfTblLastChanged		1.3.6.1.4.1.6527.3.1.2.6.32
The value of vRtrMplsSrlgDBIfTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsSrlgDBIfTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsSrlgDBIfTable		1.3.6.1.4.1.6527.3.1.2.6.33
The vRtrMplsSrlgDBIfTable has an entry for each Shared Risk Link Group (SRLG) groups associated with a interface which is validated as part of a router ID in the routing table. The user manually enters the SRLG membership information for any link in the network, into the user SRLG database.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsSrlgDBIfEntry

vRtrMplsSrlgDBIfEntry		1.3.6.1.4.1.6527.3.1.2.6.33.1
Each row entry represents an SRLG group associated with a interface which is validated as part of a router ID in the routing table. A row can be created or deleted via SNMP SET requests.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsSrlgDBIfEntry

vRtrMplsSrlgDBIfIntIpAddrType		1.3.6.1.4.1.6527.3.1.2.6.33.1.1
The value of vRtrMplsSrlgDBIfIntIpAddrType indicates the type of vRtrMplsSrlgDBIfIntIpAddr.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrMplsSrlgDBIfIntIpAddr		1.3.6.1.4.1.6527.3.1.2.6.33.1.2
The value of vRtrMplsSrlgDBIfIntIpAddr indicates the IP address of the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsSrlgDBIfSrlgGroupName		1.3.6.1.4.1.6527.3.1.2.6.33.1.3
The value of vRtrMplsSrlgDBIfSrlgGroupName indicates the SRLG group name.
Status: current	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsSrlgDBIfRowStatus		1.3.6.1.4.1.6527.3.1.2.6.33.1.4
vRtrMplsSrlgDBIfRowStatus is used to create, delete or control entries in the vRtrMplsSrlgDBIfTable.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsSrlgDBIfLastChanged		1.3.6.1.4.1.6527.3.1.2.6.33.1.5
The value of vRtrMplsSrlgDBIfLastChanged indicates the timestamp of last change to this row in vRtrMplsSrlgDBIfTable.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsInSegmentTable		1.3.6.1.4.1.6527.3.1.2.6.34
The vRtrMplsInSegmentTable augments the mplsInSegmentTable in the MPLS-LSR-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsInSegmentEntry

vRtrMplsInSegmentEntry		1.3.6.1.4.1.6527.3.1.2.6.34.1
A row entry in this table corresponds to a row entry in the mplsInSegmentTable and adds to the information contained in that table.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsInSegmentEntry

vRtrMplsInSegmentNumS2ls		1.3.6.1.4.1.6527.3.1.2.6.34.1.1
The value of vRtrMplsInSegmentNumS2ls specifies number of S2Ls on the insegment.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsOutSegmentTable		1.3.6.1.4.1.6527.3.1.2.6.35
The vRtrMplsOutSegmentTable augments the mplsOutSegmentTable in the MPLS-LSR-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsOutSegmentEntry

vRtrMplsOutSegmentEntry		1.3.6.1.4.1.6527.3.1.2.6.35.1
A row entry in this table corresponds to a row entry in the mplsOutSegmentTable and adds to the information contained in that table.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsOutSegmentEntry

vRtrMplsOutSegmentNumS2ls		1.3.6.1.4.1.6527.3.1.2.6.35.1.1
The value of vRtrMplsOutSegmentNumS2ls specifies number of S2Ls on the outsegment.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspStatsTblLastChgd		1.3.6.1.4.1.6527.3.1.2.6.37
Timestamp of the last change to the vRtrMplsLspStatsTable either from adding a row or removing a row.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspStatsTable		1.3.6.1.4.1.6527.3.1.2.6.38
vRtrMplsLspStatsTable controls Statsistics in the ess data-path at the ingress Label Switched Path (LSP) for an Mpls-Lsp FEC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspStatsEntry

vRtrMplsLspStatsEntry		1.3.6.1.4.1.6527.3.1.2.6.38.1
A row in this table represents information about the Statistics collection per MPLS LSP.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspStatsEntry

vRtrMplsLspStatsType		1.3.6.1.4.1.6527.3.1.2.6.38.1.1
The value of vRtrMplsLspStatsType indicates the type of statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	egress(0), ingress(1)

vRtrMplsLspStatsSenderAddrType		1.3.6.1.4.1.6527.3.1.2.6.38.1.2
The value of vRtrMplsLspStatsSenderAddrType indicates address type of vRtrMplsLspStatsSenderAddr.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrMplsLspStatsSenderAddr		1.3.6.1.4.1.6527.3.1.2.6.38.1.3
The value of vRtrMplsLspStatsSenderAddr indicates the sender address.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(4|16)

vRtrMplsLspStatsLspName		1.3.6.1.4.1.6527.3.1.2.6.38.1.4
The value of vRtrMplsLspStatsLspName indicates the lsp name.
Status: current	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsLspStatsRowStatus		1.3.6.1.4.1.6527.3.1.2.6.38.1.5
vRtrMplsLspStatsRowStatus is used for the creation or deletion of entries in the vRtrMplsLspStatsTable.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsLspStatsLastChanged		1.3.6.1.4.1.6527.3.1.2.6.38.1.6
The value of vRtrMplsLspStatsLastChanged indicates the time stamp of the last change to this row of this table.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspStatsCollectStats		1.3.6.1.4.1.6527.3.1.2.6.38.1.7
The value of vRtrMplsLspStatsCollectStats specifies whether to collect statistics for this prefix.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspStatsAccntingPolicy		1.3.6.1.4.1.6527.3.1.2.6.38.1.8
The value of vRtrMplsLspStatsAccntingPolicy specifies the accounting policy to be used for this entry. A value of zero indicates that the default accounting policy should be used.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 1..99

vRtrMplsLspStatsAdminState		1.3.6.1.4.1.6527.3.1.2.6.38.1.9
The value of vRtrMplsLspStatsAdminState specifies whether egress statistics are enabled for this lsp.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsLspStatisticsTable		1.3.6.1.4.1.6527.3.1.2.6.39
The vRtrMplsLspStatisticsTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspStatisticsEntry

vRtrMplsLspStatisticsEntry		1.3.6.1.4.1.6527.3.1.2.6.39.1
Each row entry represents a collection of statistics for a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspStatisticsEntry

vRtrMplsInProfilePktsFc0		1.3.6.1.4.1.6527.3.1.2.6.39.1.1
The value of vRtrMplsInProfilePktsFc0 indicates the number of in profile packets received for Forwarding Class 0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc0Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.2
The value of vRtrMplsInProfilePktsFc0 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc0High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.3
The value of vRtrMplsInProfilePktsFc0 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc1		1.3.6.1.4.1.6527.3.1.2.6.39.1.4
The value of vRtrMplsInProfilePktsFc1 indicates the number of in profile packets received for Forwarding Class 1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc1Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.5
The value of vRtrMplsInProfilePktsFc1 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc1High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.6
The value of vRtrMplsInProfilePktsFc1 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc2		1.3.6.1.4.1.6527.3.1.2.6.39.1.7
The value of vRtrMplsInProfilePktsFc2 indicates the number of in profile packets received for Forwarding Class 2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc2Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.8
The value of vRtrMplsInProfilePktsFc2 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc2High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.9
The value of vRtrMplsInProfilePktsFc2 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc3		1.3.6.1.4.1.6527.3.1.2.6.39.1.10
The value of vRtrMplsInProfilePktsFc3 indicates the number of in profile packets received for Forwarding Class 3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc3Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.11
The value of vRtrMplsInProfilePktsFc3 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc3High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.12
The value of vRtrMplsInProfilePktsFc3 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc4		1.3.6.1.4.1.6527.3.1.2.6.39.1.13
The value of vRtrMplsInProfilePktsFc4 indicates the number of in profile packets received for Forwarding Class 4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc4Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.14
The value of vRtrMplsInProfilePktsFc4 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc4High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.15
The value of vRtrMplsInProfilePktsFc4 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc5		1.3.6.1.4.1.6527.3.1.2.6.39.1.16
The value of vRtrMplsInProfilePktsFc5 indicates the number of in profile packets received for Forwarding Class 5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc5Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.17
The value of vRtrMplsInProfilePktsFc5 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc5High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.18
The value of vRtrMplsInProfilePktsFc5 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc6		1.3.6.1.4.1.6527.3.1.2.6.39.1.19
The value of vRtrMplsInProfilePktsFc6 indicates the number of in profile packets received for Forwarding Class 6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc6Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.20
The value of vRtrMplsInProfilePktsFc6 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc6High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.21
The value of vRtrMplsInProfilePktsFc6 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc7		1.3.6.1.4.1.6527.3.1.2.6.39.1.22
The value of vRtrMplsInProfilePktsFc7 indicates the number of in profile packets received for Forwarding Class 7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfilePktsFc7Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.23
The value of vRtrMplsInProfilePktsFc7 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfilePktsFc7High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.24
The value of vRtrMplsInProfilePktsFc7 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc0		1.3.6.1.4.1.6527.3.1.2.6.39.1.25
The value of vRtrMplsInProfileOctetsFc0 indicates the number of in profile octets received for Forwarding Class 0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc0Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.26
The value of vRtrMplsInProfileOctetsFc0 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc0High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.27
The value of vRtrMplsInProfileOctetsFc0 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc1		1.3.6.1.4.1.6527.3.1.2.6.39.1.28
The value of vRtrMplsInProfileOctetsFc1 indicates the number of in profile octets received for Forwarding Class 1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc1Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.29
The value of vRtrMplsInProfileOctetsFc1 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc1High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.30
The value of vRtrMplsInProfileOctetsFc1 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc2		1.3.6.1.4.1.6527.3.1.2.6.39.1.31
The value of vRtrMplsInProfileOctetsFc2 indicates the number of in profile octets received for Forwarding Class 2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc2Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.32
The value of vRtrMplsInProfileOctetsFc2 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc2High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.33
The value of vRtrMplsInProfileOctetsFc2 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc3		1.3.6.1.4.1.6527.3.1.2.6.39.1.34
The value of vRtrMplsInProfileOctetsFc3 indicates the number of in profile octets received for Forwarding Class 3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc3Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.35
The value of vRtrMplsInProfileOctetsFc3 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc3High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.36
The value of vRtrMplsInProfileOctetsFc3 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc4		1.3.6.1.4.1.6527.3.1.2.6.39.1.37
The value of vRtrMplsInProfileOctetsFc4 indicates the number of in profile octets received for Forwarding Class 4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc4Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.38
The value of vRtrMplsInProfileOctetsFc4 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc4High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.39
The value of vRtrMplsInProfileOctetsFc4 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc5		1.3.6.1.4.1.6527.3.1.2.6.39.1.40
The value of vRtrMplsInProfileOctetsFc5 indicates the number of in profile octets received for Forwarding Class 5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc5Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.41
The value of vRtrMplsInProfileOctetsFc5 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc5High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.42
The value of vRtrMplsInProfileOctetsFc5 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc6		1.3.6.1.4.1.6527.3.1.2.6.39.1.43
The value of vRtrMplsInProfileOctetsFc6 indicates the number of in profile octets received for Forwarding Class 6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc6Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.44
The value of vRtrMplsInProfileOctetsFc6 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc6High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.45
The value of vRtrMplsInProfileOctetsFc6 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc7		1.3.6.1.4.1.6527.3.1.2.6.39.1.46
The value of vRtrMplsInProfileOctetsFc7 indicates the number of in profile octets received for Forwarding Class 7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsInProfileOctetsFc7Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.47
The value of vRtrMplsInProfileOctetsFc7 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsInProfileOctetsFc7High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.48
The value of vRtrMplsInProfileOctetsFc7 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc0		1.3.6.1.4.1.6527.3.1.2.6.39.1.49
The value of vRtrMplsOutOfProfPktsFc0 indicates the number of out of profile packets received for Forwarding Class 0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc0Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.50
The value of vRtrMplsOutOfProfPktsFc0 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc0High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.51
The value of vRtrMplsOutOfProfPktsFc0 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc1		1.3.6.1.4.1.6527.3.1.2.6.39.1.52
The value of vRtrMplsOutOfProfPktsFc1 indicates the number of out of profile packets received for Forwarding Class 1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc1Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.53
The value of vRtrMplsOutOfProfPktsFc1 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc1High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.54
The value of vRtrMplsOutOfProfPktsFc1 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc2		1.3.6.1.4.1.6527.3.1.2.6.39.1.55
The value of vRtrMplsOutOfProfPktsFc2 indicates the number of out of profile packets received for Forwarding Class 2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc2Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.56
The value of vRtrMplsOutOfProfPktsFc2 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc2High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.57
The value of vRtrMplsOutOfProfPktsFc2 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc3		1.3.6.1.4.1.6527.3.1.2.6.39.1.58
The value of vRtrMplsOutOfProfPktsFc3 indicates the number of out of profile packets received for Forwarding Class 3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc3Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.59
The value of vRtrMplsOutOfProfPktsFc3 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc3High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.60
The value of vRtrMplsOutOfProfPktsFc3 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc4		1.3.6.1.4.1.6527.3.1.2.6.39.1.61
The value of vRtrMplsOutOfProfPktsFc4 indicates the number of out of profile packets received for Forwarding Class 4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc4Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.62
The value of vRtrMplsOutOfProfPktsFc4 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc4High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.63
The value of vRtrMplsOutOfProfPktsFc4 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc5		1.3.6.1.4.1.6527.3.1.2.6.39.1.64
The value of vRtrMplsOutOfProfPktsFc5 indicates the number of out of profile packets received for Forwarding Class 5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc5Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.65
The value of vRtrMplsOutOfProfPktsFc5 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc5High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.66
The value of vRtrMplsOutOfProfPktsFc5 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc6		1.3.6.1.4.1.6527.3.1.2.6.39.1.67
The value of vRtrMplsOutOfProfPktsFc6 indicates the number of out of profile packets received for Forwarding Class 6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc6Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.68
The value of vRtrMplsOutOfProfPktsFc6 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc6High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.69
The value of vRtrMplsOutOfProfPktsFc6 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc7		1.3.6.1.4.1.6527.3.1.2.6.39.1.70
The value of vRtrMplsOutOfProfPktsFc7 indicates the number of out of profile packets received for Forwarding Class 7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfPktsFc7Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.71
The value of vRtrMplsOutOfProfPktsFc7 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfPktsFc7High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.72
The value of vRtrMplsOutOfProfPktsFc7 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc0		1.3.6.1.4.1.6527.3.1.2.6.39.1.73
The value of vRtrMplsOutOfProfOctetsFc0 indicates the number of out of profile octets received for Forwarding Class 0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc0Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.74
The value of vRtrMplsOutOfProfOctetsFc0 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc0High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.75
The value of vRtrMplsOutOfProfOctetsFc0 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc0.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc1		1.3.6.1.4.1.6527.3.1.2.6.39.1.76
The value of vRtrMplsOutOfProfOctetsFc1 indicates the number of out of profile octets received for Forwarding Class 1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc1Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.77
The value of vRtrMplsOutOfProfOctetsFc1 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc1High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.78
The value of vRtrMplsOutOfProfOctetsFc1 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc1.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc2		1.3.6.1.4.1.6527.3.1.2.6.39.1.79
The value of vRtrMplsOutOfProfOctetsFc2 indicates the number of out of profile octets received for Forwarding Class 2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc2Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.80
The value of vRtrMplsOutOfProfOctetsFc2 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc2High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.81
The value of vRtrMplsOutOfProfOctetsFc2 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc2.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc3		1.3.6.1.4.1.6527.3.1.2.6.39.1.82
The value of vRtrMplsOutOfProfOctetsFc3 indicates the number of out of profile octets received for Forwarding Class 3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc3Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.83
The value of vRtrMplsOutOfProfOctetsFc3 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc3High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.84
The value of vRtrMplsOutOfProfOctetsFc3 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc3.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc4		1.3.6.1.4.1.6527.3.1.2.6.39.1.85
The value of vRtrMplsOutOfProfOctetsFc4 indicates the number of out of profile octets received for Forwarding Class 4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc4Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.86
The value of vRtrMplsOutOfProfOctetsFc4 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc4High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.87
The value of vRtrMplsOutOfProfOctetsFc4 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc4.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc5		1.3.6.1.4.1.6527.3.1.2.6.39.1.88
The value of vRtrMplsOutOfProfOctetsFc5 indicates the number of out of profile octets received for Forwarding Class 5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc5Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.89
The value of vRtrMplsOutOfProfOctetsFc5 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc5High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.90
The value of vRtrMplsOutOfProfOctetsFc5 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc5.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc6		1.3.6.1.4.1.6527.3.1.2.6.39.1.91
The value of vRtrMplsOutOfProfOctetsFc6 indicates the number of out of profile octets received for Forwarding Class 6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc6Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.92
The value of vRtrMplsOutOfProfOctetsFc6 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc6High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.93
The value of vRtrMplsOutOfProfOctetsFc6 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc6.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc7		1.3.6.1.4.1.6527.3.1.2.6.39.1.94
The value of vRtrMplsOutOfProfOctetsFc7 indicates the number of out of profile octets received for Forwarding Class 7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

vRtrMplsOutOfProfOctetsFc7Low32		1.3.6.1.4.1.6527.3.1.2.6.39.1.95
The value of vRtrMplsOutOfProfOctetsFc7 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsOutOfProfOctetsFc7High32		1.3.6.1.4.1.6527.3.1.2.6.39.1.96
The value of vRtrMplsOutOfProfOctetsFc7 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc7.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrMplsLspStatsPSBMatch		1.3.6.1.4.1.6527.3.1.2.6.39.1.97
The value of vRtrMplsLspStatsPSBMatch indicates if a path state block (PSB) match was made against this LSP name.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspStatsTpOnly		1.3.6.1.4.1.6527.3.1.2.6.39.1.98
The value of vRtrMplsLspStatsTpOnly indicates whether the statistics apply to mpls-tp lsp or for regular rsvp-te signalled terminating LSP. The value of 'true' indicates the statistics apply to mpls-tp LSP only. The value of 'false' indicates the statistics apply for regular rsvp-te signalled terminating LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspTemplateTblLastChgd		1.3.6.1.4.1.6527.3.1.2.6.40
The value of vRtrMplsLspTemplateTblLastChgd indicates the sysUpTime at the time of the last modification of an entry in the vRtrMplsLspTemplateTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspTemplateTable		1.3.6.1.4.1.6527.3.1.2.6.41
The vRtrMplsLspTemplateTable has an entry for each Labeled Switch Path Template(LSP Template) configured for a virtual router in the system. The table contains a list of LSP Templates that are referenced when dynamic LSP creation is required.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspTemplateEntry

vRtrMplsLspTemplateEntry		1.3.6.1.4.1.6527.3.1.2.6.41.1
Each row entry represents a Labeled Switch Path Template (LSP Template) configured for a virtual router in the system. Entries in this table can be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspTemplateEntry

vRtrMplsLspTemplateName		1.3.6.1.4.1.6527.3.1.2.6.41.1.1
The value of the object vRtrMplsLspTemplateName specifies the name of the LSP Template which is used as a guideline to create and signal multiple LSP instances when dynamic LSP creation is required.
Status: current	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsLspTemplateRowStatus		1.3.6.1.4.1.6527.3.1.2.6.41.1.2
The value of vRtrMplsLspTemplateRowStatus specifies the Row Status for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrMplsLspTemplateLastChanged		1.3.6.1.4.1.6527.3.1.2.6.41.1.3
The value of vRtrMplsLspTemplateLastChanged indicates the timestamp of last change to this row in vRtrMplsLspTemplateTable.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspTemplateAdminState		1.3.6.1.4.1.6527.3.1.2.6.41.1.4
The value of vRtrMplsLspTemplateAdminState specifies the current administrative state of the LSP Template.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrMplsLspTemplateType		1.3.6.1.4.1.6527.3.1.2.6.41.1.5
The value of vRtrMplsLspTemplateType specifies the type of the LSP template. When the value of vRtrMplsLspTemplateType is set to 'p2mp', the template is used for auto creation of P2MP LSPs.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	p2mp(1)

vRtrMplsLspTemplateAdaptive		1.3.6.1.4.1.6527.3.1.2.6.41.1.6
The value of vRtrMplsLspTemplateAdaptive specifies whether the make-before-break functionality is enabled for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateAdaptive is set to 'true', make-before-break functionality is enabled. When the value is set to 'false' make-before-break functionality is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspTemplateBandwidth		1.3.6.1.4.1.6527.3.1.2.6.41.1.7
The value of vRtrMplsLspTemplateBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) to be reserved for the LSPs that are dynamically created using this LSP template. A value of zero (0) indicates that no bandwidth is reserved.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..100000

vRtrMplsLspTemplateCspf		1.3.6.1.4.1.6527.3.1.2.6.41.1.8
The value of vRtrMplsLspTemplateCspf specifies whether the CSPF computation for constrained-path LSP is enabled for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateCspf is set to 'true', CSPF computation for constrained-path is enabled. When the value is set to 'false', CSPF computation for constrained-path is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspTemplateDefaultPath		1.3.6.1.4.1.6527.3.1.2.6.41.1.9
The value of vRtrMplsLspTemplateDefaultPath specifies the default path used to signal LSPs that are dynamically created using this LSP template. If a corresponding index does not exist in MPLS-TE-MIB::mplsTunnelTable, an 'inconsistentValue' error will be returned.
Status: current	Access: read-create
OBJECT-TYPE
	MplsTunnelIndex

vRtrMplsLspTemplateAdmGrpIncl		1.3.6.1.4.1.6527.3.1.2.6.41.1.10
The value of vRtrMplsLspTemplateAdmGrpIncl specifies a bit-map of admin groups that are included when the dynamically created LSPs using this template are setup . If bit 'n' is set, then the admin group with value 'n' is included. This implies that each link that the LSP goes through must be associated with at least one of the admin groups in the include list. By default, all admin groups are in the include list.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspTemplateAdmGrpExcl		1.3.6.1.4.1.6527.3.1.2.6.41.1.11
The value of vRtrMplsLspTemplateAdmGrpExcl specifies a bit-map of admin groups that are excluded when the dynamically created LSPs using this template are setup. If bit 'n' is set, then the admin group with value 'n' is excluded. This implies that each link that the LSP goes through must not be associated with any of the admin groups in the exclude list. By default, no admin groups are in the exclude list.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrMplsLspTemplateFastReroute		1.3.6.1.4.1.6527.3.1.2.6.41.1.12
The value of vRtrMplsLspTemplateFastReroute specifies whether fast reroute is enabled for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateFastReroute is set to 'true', fast reroute is enabled for the LSP. When the value of vRtrMplsLspTemplateFastReroute is set to'false', fast reroute is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspTemplateFRMethod		1.3.6.1.4.1.6527.3.1.2.6.41.1.13
The value of vRtrMplsLspTemplateFRMethod specifies the fast reroute method used for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateFRMethod is set to 'oneToOneBackup', a backup LSP is established which will intersect the original LSP somewhere downstream of the point of link or node failure. For each LSP that is backed up, a separate backup LSP is established. When the value of vRtrMplsLspTemplateFRMethod is set to 'facilityBackup', Instead of creating a separateLSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. For LSP templates of type P2MP, oneToOneBackup is not supported.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	oneToOneBackup(1), facilityBackup(2)

vRtrMplsLspTemplateFRHopLimit		1.3.6.1.4.1.6527.3.1.2.6.41.1.14
The value of vRtrMplsLspTemplateFRHopLimit specifies the total number of hops a detour or backup LSP can take before merging back onto the main LSP path.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

vRtrMplsLspTemplateHopLimit		1.3.6.1.4.1.6527.3.1.2.6.41.1.15
The value of vRtrMplsLspTemplateHopLimit specifies the maximum number of hops that a dynamically created LSP will traverse including the ingress and egress ESRs. A LSP will not be set up if the hop limit is exceeded.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	2..255

vRtrMplsLspTemplateRecord		1.3.6.1.4.1.6527.3.1.2.6.41.1.16
The value of vRtrMplsLspTemplateRecord specifies whether the recording of all the hops is enabled for LSPs that are dynamically created using this template. When the value of vRtrMplsLspTemplateRecord is set to 'record', recording of all the hops that a LSP traverses is enabled. When the value of vRtrMplsLspTemplateRecord is set to 'noRecord', recording of all the hops that a LSP traverses is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	record(1), noRecord(2)

vRtrMplsLspTemplateRecordLabel		1.3.6.1.4.1.6527.3.1.2.6.41.1.17
The value of vRtrMplsLspTemplateRecordLabel specifies whether the recording of labels is enabled for LSPs that are dynamically created using this LSP template . When the value of vRtrMplsLspTemplateRecordLabel is set to 'record', recording of labels at each node that a LSP traverses is enabled. When the value of vRtrMplsLspTemplateRecordLabel is set to 'noRecord', recording of labels at each node that a LSP traverses is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	record(1), noRecord(2)

vRtrMplsLspTemplateRetryLimit		1.3.6.1.4.1.6527.3.1.2.6.41.1.18
The value of vRtrMplsLspTemplateRetryLimit specifies the maximum number of attempts made to establish an LSP that is dynamically created using this template. A value of zero(0) specifies that an infinite number of retry attempts should be made.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10000

vRtrMplsLspTemplateRetryTimer		1.3.6.1.4.1.6527.3.1.2.6.41.1.19
The value of vRtrMplsLspTemplateRetryTimer specifies the time in seconds a dynamically created Lsp waits before it attempts to re-establish itself.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..600

vRtrMplsLspTemplateCspfTeMetric		1.3.6.1.4.1.6527.3.1.2.6.41.1.20
The value of vRtrMplsLspTemplateCspfTeMetric specifies whether the TE metric is used for the purpose of the LSP path computation by CSPF (Constrained Shortest Path First). When the value of vRtrMplsLspTemplateCspfTeMetric is set to 'true', the TE metric is used to compute the path of the LSP by CSPF. When the value of vRtrMplsLspTemplateCspfTeMetric is set to 'false', IGP metric is used to compute the path of the LSP by CSPF.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMplsLspTemplateLspCount		1.3.6.1.4.1.6527.3.1.2.6.41.1.21
The value of vRtrMplsLspTemplateLspCount indicates the number of LSPs of type 'p2mpAuto' that are created using this template.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsLspTemplateMvpnRefCount		1.3.6.1.4.1.6527.3.1.2.6.41.1.22
The value of vRtrMplsLspTemplateMvpnRefCount indicates the number of MVPNs as well as number of P2MP LSP users associated to this template.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMplsLspAutoBWTableLastChg		1.3.6.1.4.1.6527.3.1.2.6.42
The value of vRtrMplsLspAutoBWTableLastChg indicates the sysUpTime at the time of the last modification to vRtrMplsLspAutoBandwidthTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspAutoBandwidthTable		1.3.6.1.4.1.6527.3.1.2.6.43
The vRtrMplsLspAutoBandwidthTable has an entry for auto bandwidth configuration for each Labeled Switch Path (LSP) configured for a virtual router in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspAutoBandwidthEntry

vRtrMplsLspAutoBandwidthEntry		1.3.6.1.4.1.6527.3.1.2.6.43.1
Each row entry represents auto bandwidth configuration for a Labeled Switch Path (LSP) configured for a virtual router in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspAutoBandwidthEntry

vRtrMplsLspAutoBWLspName		1.3.6.1.4.1.6527.3.1.2.6.43.1.1
The value of vRtrMplsLspAutoBWLspName uniquely identifies a row in the vRtrMplsLspAutoBandwidthTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TNamedItem

vRtrMplsLspAutoBWLastChange		1.3.6.1.4.1.6527.3.1.2.6.43.1.2
The sysUpTime when this row was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspAutoBWAdjDNPercent		1.3.6.1.4.1.6527.3.1.2.6.43.1.3
The value of vRtrMplsLspAutoBWAdjDNPercent specifies minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for decreasing the bandwidth of the LSP. At the adjust interval expiry, if the measured bandwidth falls below the current bandwidth by the value of vRtrMplsLspAutoBWAdjDNPercent it can cause a re-signaling attempt for the LSP When the value of vRtrMplsLspAutoBWAdjDNPercent is 0 it means that this threshold check is always true for any measured bandwidth less than current bandwidth
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..100

vRtrMplsLspAutoBWAdjDNMbps		1.3.6.1.4.1.6527.3.1.2.6.43.1.4
The value of vRtrMplsLspAutoBWAdjDNMbps specifies the minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as an absolute bandwidth (Mbps), for decreasing the bandwidth of the LSP.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..100000

vRtrMplsLspAutoBWAdjMultiplier		1.3.6.1.4.1.6527.3.1.2.6.43.1.5
The value of vRtrMplsLspAutoBWAdjMultiplier specifies the number of collection intervals in the adjust interval. The default value is derived from vRtrMplsGeneralAutoBWDefAdjMul and vRtrMplsLspAutoBWAdjCount.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..16383

vRtrMplsLspAutoBWAdjUPPercent		1.3.6.1.4.1.6527.3.1.2.6.43.1.6
The value of vRtrMplsLspAutoBWAdjUPPercent specifies minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspAutoBWAdjUPPercent it can cause a re-signaling attempt for the LSP When the value of vRtrMplsLspAutoBWAdjUPPercent is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..100

vRtrMplsLspAutoBWAdjUPMbps		1.3.6.1.4.1.6527.3.1.2.6.43.1.7
The value of vRtrMplsLspAutoBWAdjDNMbps specifies the minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as an absolute bandwidth (Mbps), for increasing the bandwidth of the LSP.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..100000

vRtrMplsLspAutoBWMaxBW		1.3.6.1.4.1.6527.3.1.2.6.43.1.8
The value of vRtrMplsLspAutoBWMaxBW specifies the maximum that auto-bandwidth allocation is allowed to request for a LSP.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..100000

vRtrMplsLspAutoBWMinBW		1.3.6.1.4.1.6527.3.1.2.6.43.1.9
The value of vRtrMplsLspAutoBWMinBW specifies the minimum that auto-bandwidth allocation is allowed to request for a LSP.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..100000

vRtrMplsLspAutoBWMonitorBW		1.3.6.1.4.1.6527.3.1.2.6.43.1.10
The value of vRtrMplsLspAutoBWMonitorBW specifies whether the collection and display of auto-bandwidth measurements is enabled or disabled for the LSP. When the value of vRtrMplsLspAutoBWMonitorBW is 'true' the collection and display of auto-bandwidth measurements is enabled and when the value is 'false' it is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

vRtrMplsLspAutoBWOverFlow		1.3.6.1.4.1.6527.3.1.2.6.43.1.11
The value of vRtrMplsLspAutoBWOverFlow specifies number of overflow samples that triggers an overflow auto-bandwidth adjustment attempt.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0 | 1..10

vRtrMplsLspAutoBWOvrFlwThreshold		1.3.6.1.4.1.6527.3.1.2.6.43.1.12
The value of vRtrMplsLspAutoBWOvrFlwThreshold specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as a percentage of the current bandwidth, for counting an overflow sample.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0 | 1..100

vRtrMplsLspAutoBWOvrFlwBW		1.3.6.1.4.1.6527.3.1.2.6.43.1.13
The value of vRtrMplsLspAutoBWOvrFlwBW specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as an absolute bandwidth (Mbps), for counting an overflow sample.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..100000

vRtrMplsLspAutoBWSampMultiplier		1.3.6.1.4.1.6527.3.1.2.6.43.1.14
The value of vRtrMplsLspAutoBWSampMultiplier specifies the mulitplier for collection intervals in a sample interval.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..511

vRtrMplsLspAutoBWSampTime		1.3.6.1.4.1.6527.3.1.2.6.43.1.15
The value of vRtrMplsLspAutoBWSampTime indicates the sample multipler times the collection interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWLastAdj		1.3.6.1.4.1.6527.3.1.2.6.43.1.16
The value of vRtrMplsLspAutoBWLastAdj indicates the system time for the last auto-bandwidth adjustment.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrMplsLspAutoBWLastAdjCause		1.3.6.1.4.1.6527.3.1.2.6.43.1.17
The value of vRtrMplsLspAutoBWLastAdjCause indicates the cause for the last auto-bandwidth adjustment.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxMplsLspAutoBWLastAdjCause

vRtrMplsLspAutoBWNextAdj		1.3.6.1.4.1.6527.3.1.2.6.43.1.18
The value of vRtrMplsLspAutoBWNextAdj indicates the system time when then adjust-timer will expire.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWMaxAvgRate		1.3.6.1.4.1.6527.3.1.2.6.43.1.19
The value of vRtrMplsLspAutoBWMaxAvgRate indicates the maximum average data rate in any sample interval of the current adjust interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWLastAvgRate		1.3.6.1.4.1.6527.3.1.2.6.43.1.20
The value of vRtrMplsLspAutoBWLastAvgRate indicates the avegare data rate in the sample interval that ended most recently.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWInheritance		1.3.6.1.4.1.6527.3.1.2.6.43.1.21
For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrMplsGeneralTable, there is bit within vRtrMplsLspAutoBWInheritance that controls whether to inherit the operational value of the object or use the administratively set value. This object is a bit-mask, with the following positions: vRtrMplsLspAutoBWAdjMultiplier 0x1 vRtrMplsLspAutoBWSampMultiplier 0x2 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsGeneralTable.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWCurrentBW		1.3.6.1.4.1.6527.3.1.2.6.43.1.22
The value of vRtrMplsLspAutoBWCurrentBW indicates the current bandwidth reserved along the primary path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWAdjTime		1.3.6.1.4.1.6527.3.1.2.6.43.1.23
The value of vRtrMplsLspAutoBWAdjTime indicates the adjust multipler times the collection interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWOvrFlwCount		1.3.6.1.4.1.6527.3.1.2.6.43.1.24
The value of vRtrMplsLspAutoBWOvrFlwCount indicates the number of overflow samples since the last reset.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWSampCount		1.3.6.1.4.1.6527.3.1.2.6.43.1.25
The value of vRtrMplsLspAutoBWSampCount indicates the count in the sample interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWAdjCount		1.3.6.1.4.1.6527.3.1.2.6.43.1.26
The value of vRtrMplsLspAutoBWAdjCount indicates the count in the adjust interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspAutoBWOperState		1.3.6.1.4.1.6527.3.1.2.6.43.1.27
The value of vRtrMplsLspAutoBWOperState indicates the opertional status for the LSP.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxEnabledDisabled

vRtrMplsLspAutoBWSampInterval		1.3.6.1.4.1.6527.3.1.2.6.43.1.28
The value of vRtrMplsLspAutoBWSampInterval indicates the number of sample intervals.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathOperTable		1.3.6.1.4.1.6527.3.1.2.6.44
The vRtrMplsLspPathOperTable has an entry for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrMplsLspPathOperEntry

vRtrMplsLspPathOperEntry		1.3.6.1.4.1.6527.3.1.2.6.44.1
Each row entry represents an operational status for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable. Entries cannot be created and deleted via SNMP SET operations. A row entry will have valid operational status info when vRtrMplsLspPathOperState is set to inService.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrMplsLspPathOperEntry

vRtrMplsLspPathOperSetupPriority		1.3.6.1.4.1.6527.3.1.2.6.44.1.1
The value of vRtrMplsLspPathOperSetupPriority specifies the setup priority used by the operational LSP path. When make-before-break functionality for the LSP is enabled and if the path setup priority is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new setup priority settings has been established. While a new path is being signaled, the administrative value and the operational values of the path setup priority may differ. The value of vRtrMplsLspPathSetupPriority specifies the setup priority for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperSetupPriority specifies the setup priority for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsLspPathOperHoldPriority		1.3.6.1.4.1.6527.3.1.2.6.44.1.2
The value of vRtrMplsLspPathOperHoldPriority specifies the hold priority used by the operational LSP path. When make-before-break functionality for the LSP is enabled and if the path hold priority is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new hold priority settings has been established. While a new path is being signaled, the administrative value and the operational values of the path hold priority may differ. The value of vRtrMplsLspPathHoldPriority specifies the hold priority for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperHoldPriority specifies the hold priority for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..7

vRtrMplsLspPathOperRecord		1.3.6.1.4.1.6527.3.1.2.6.44.1.3
The value of vRtrMplsLspPathOperRecord specifies whether the operational LSP path is recording or not recording all the traversed hops. When make-before-break functionality for the LSP is enabled and if the path hops recording setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of hops recording setting of the path may differ. The value of vRtrMplsLspPathRecord specifies the hops recording setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperRecord specifies the hops recording setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	record(1), noRecord(2)

vRtrMplsLspPathOperRecordLabel		1.3.6.1.4.1.6527.3.1.2.6.44.1.4
The value of vRtrMplsLspPathOperRecordLabel specifies whether the currently operational LSP path is recording or not recording the label allocated at each traversed node. When make-before-break functionality for the LSP is enabled and if the path label recording setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of label recording setting of the path may differ. The value of vRtrMplsLspPathRecordLabel specifies the label recording setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperRecordLabel specifies the label recording setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	record(1), noRecord(2)

vRtrMplsLspPathOperHopLimit		1.3.6.1.4.1.6527.3.1.2.6.44.1.5
The value of vRtrMplsLspPathOperHopLimit specifies the maximum hops limit used by the currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the hop limit is changed at either LSP or LSP path level, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path hop limit may differ. The value of either vRtrMplsLspHopLimit or vRtrMplsLspPathHopLimit specifies the hop limit for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperHopLimit specifies the hop limit for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..255

vRtrMplsLspPathOperAdminGrpIncl		1.3.6.1.4.1.6527.3.1.2.6.44.1.6
The value of vRtrMplsLspPathOperAdminGrpIncl is a bit-map which specifies a list of admin groups included by the currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the list of included admin groups is changed at either LSP or LSP path level, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of either vRtrMplsLspAdminGroupInclude or vRtrMplsLspPathAdminGroupInclude specifies the include admin groups bit-map for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperAdminGrpIncl specifies the include admin groups bit-map for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathOperAdminGrExcld		1.3.6.1.4.1.6527.3.1.2.6.44.1.7
The value of vRtrMplsLspPathOperAdminGrExcld is a bit-map which specifies a list of admin groups excluded by the currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the list of excluded admin groups is changed at either LSP or LSP path level, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of either vRtrMplsLspAdminGroupExclude or vRtrMplsLspPathAdminGroupExclude specifies the exclude admin groups bit-map for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperAdminGrExcld specifies the exclude admin groups bit-map for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathOperCspf		1.3.6.1.4.1.6527.3.1.2.6.44.1.8
The value of vRtrMplsLspPathOperCspf specifies whether the currently operational LSP path has used CSPF computation for constrained-path enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP CSPF setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspCspf specifies the CSPF setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperCspf specifies the CSPF setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathOperCspfToFrstLs		1.3.6.1.4.1.6527.3.1.2.6.44.1.9
The value of vRtrMplsLspPathOperCspfToFrstLs specifies whether the currently operational LSP path had CSPF to first loose hop enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP CSPF to First Loose Hop setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspCspfToFirstLoose specifies the CSPF to First Loose Hop setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperCspfToFrstLs specifies the CSPF to First Loose Hop setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathOperLeastFill		1.3.6.1.4.1.6527.3.1.2.6.44.1.10
The value of vRtrMplsLspPathOperLeastFill specifies whether the currently operational LSP path was computed with the least-fill path selection method. When make-before-break functionality for the LSP is enabled and if the LSP least-fill setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspLeastFill specifies the least-fill setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperLeastFill specifies the least-fill setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathOperRsvpAdspec		1.3.6.1.4.1.6527.3.1.2.6.44.1.11
The value of vRtrMplsLspPathOperRsvpAdspec specifies whether the currently operational LSP path has ADSPEC object included in RSVP messages or not. When make-before-break functionality for the LSP is enabled and if the LSP adspec setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspRsvpAdspec specifies the adspec setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperRsvpAdspec specifies the adspec setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathOperFRNodeProtect		1.3.6.1.4.1.6527.3.1.2.6.44.1.12
The value of vRtrMplsLspPathOperFRNodeProtect specifies whether the currently operational LSP path has node protection enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP node protection setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspFRNodeProtect specifies the node protection setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperFRNodeProtect specifies the node protection setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathOperPropAdminGrp		1.3.6.1.4.1.6527.3.1.2.6.44.1.13
The value of vRtrMplsLspPathOperPropAdminGrp specifies whether the currently operational LSP path has propagation admin-groups enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP propagate admin groups setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspPropAdminGroup specifies the propagate admin groups setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperPropAdminGrp specifies the propagate admin groups setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

vRtrMplsLspPathOperFRHopLimit		1.3.6.1.4.1.6527.3.1.2.6.44.1.14
The value of vRtrMplsLspPathOperFRHopLimit indicates the total number of hops to be used by detour LSP before merging to currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the LSP FR Hop Limit setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspFRHopLimit specifies the FR Hop Limit setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperFRHopLimit specifies the FR Hop Limit setting for the existing LSP path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

vRtrMplsLabelObjs		1.3.6.1.4.1.6527.3.1.2.6.45
OBJECT IDENTIFIER

vRtrMplsLabelMaxStaticLspLabels		1.3.6.1.4.1.6527.3.1.2.6.45.1
The value of vRtrMplsLabelMaxStaticLspLabels specifies the maximum number of Static LSP labels available on the system. vRtrMplsLabelMaxStaticLspLabels must be set along with vRtrMplsLabelMaxStaticSvcLabels. The total of both values should equal the maximum value allowed of 131040 or 262112 depending on the system. The maximum value of vRtrMplsLabelMaxStaticLspLabels value for most systems is 113040 labels (128 * 1024 less 32 reserved labels). The maximum value of vRtrMplsLabelMaxStaticLspLabels value for chassis mode D systems is 262112 labels (256 * 1024 less 32 reserved labels).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..262112

vRtrMplsLabelMaxStaticSvcLabels		1.3.6.1.4.1.6527.3.1.2.6.45.2
The value of vRtrMplsLabelMaxStaticSvcLabels specifies the maximum number of Static SVC labels available on the system. vRtrMplsLabelMaxStaticSvcLabels must be set along with vRtrMplsLabelMaxStaticLspLabels. The total of both values should equal the maximum value allowed of 113040 or 262112 depending on the system. The maximum value of vRtrMplsLabelMaxStaticLspLabels value for most systems is 113040 labels (128 * 1024 less 32 reserved labels). The maximum value of vRtrMplsLabelMaxStaticLspLabels value for chassis mode D systems is 262112 labels (256 * 1024 less 32 reserved labels).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..262112

tmnxMplsNotificationObjects		1.3.6.1.4.1.6527.3.1.2.6.16
OBJECT IDENTIFIER

vRtrMplsLspNotificationReasonCode		1.3.6.1.4.1.6527.3.1.2.6.16.1
Used by vRtrMplsLspDown, the value indicates the reason for the LSP going down.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	noError(0), noPathIsOperational(1)

vRtrMplsLspPathNotificationReasonCode		1.3.6.1.4.1.6527.3.1.2.6.16.2
Used by vRtrMplsLspPathDown, the value indicates the reason for the LSP path going down.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TmnxMplsLspFailCode

vRtrMplsNotifyRow		1.3.6.1.4.1.6527.3.1.2.6.16.3
used by Alcatel-Lucent SROS series MPLS Configuration change Notifications, the object ID indicates the MPLS table and entry.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	RowPointer

vRtrMplsP2mpInstNotifIndex		1.3.6.1.4.1.6527.3.1.2.6.16.4
The unique value which identifies this Point to Multipoint Labeled Switch Path (P2MP LSP) for this virtual router in the Alcatel-Lucent SROS system. It is a unique value among entries with the same value of vRtrID.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TmnxVRtrMplsLspID

vRtrMplsP2mpInstNotifReasonCode		1.3.6.1.4.1.6527.3.1.2.6.16.5
Used by vRtrMplsP2mpInstanceDown, the value indicates the reason for the P2MP instance going down.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TmnxMplsP2mpInstFailCode

vRtrMplsS2lSubLspNtDstAddrType		1.3.6.1.4.1.6527.3.1.2.6.16.6
The value of vRtrMplsS2lSubLspDstAddrType indicates the type of vRtrMplsS2lSubLspDstAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressType

vRtrMplsS2lSubLspNtDstAddr		1.3.6.1.4.1.6527.3.1.2.6.16.7
The value of vRtrMplsS2lSubLspDstAddr indicates the IP address of the destination address of the S2L sub LSP.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrMplsLspPathCongChgPercent		1.3.6.1.4.1.6527.3.1.2.6.16.8
The value of vRtrMplsLspPathCongChgPercent indicates the percentage change in congestion.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

vRtrMplsLspPathMbbStatus		1.3.6.1.4.1.6527.3.1.2.6.16.9
The value of vRtrMplsLspPathMbbStatus indicates the status of the make-before-break (MBB) operation for the LSP path.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	successful(0), failed(1), aborted(2), ignored(3)

vRtrMplsLspPathMbbReasonCode		1.3.6.1.4.1.6527.3.1.2.6.16.10
The value of vRtrMplsLspPathMbbReasonCode indicates the reason code for the make-before-break (MBB) operation of the LSP path. It indicates whether the operation is failed, aborted or ignored.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	none(0), mbbRetryExceeded(1), lspPathGoingDown(2), startingHighPriMbb(3), restartingMbb(4), mbbAlreadyInProg(5)

vRtrMplsLspSwitchStbyReasonCode		1.3.6.1.4.1.6527.3.1.2.6.16.13
The value of vRtrMplsLspSwitchStbyReasonCode indicates the reason for the failure of switch to a new standby path from the current active standby path.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	none(0), lspIsDown(1), lspIsNotDynamic(2), lspHasNoActivePath(3), lspActivePathIsNotStandby(4), pathSpecifiedIsNotLspPath(5), pathSpecifiedIsNotStandby(6), pathSpecifedIsDown(7), pathHasDiffPrefThanActLspPath(8), lspHoldTimerIsRunning(9), currentLspPathActiveByForce(10), lspPathInPreemption(11)

vRtrMplsLspOldTunnelIndex		1.3.6.1.4.1.6527.3.1.2.6.16.14
The value of vRtrMplsLspOldTunnelIndex indicates the tunnel index of of the old LSP path.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	MplsTunnelIndex

vRtrMplsXCNotifRednIndicesBitMap		1.3.6.1.4.1.6527.3.1.2.6.16.15
The value of vRtrMplsXCNotifRednIndicesBitMap indicates the RSVP sessions that either changed state and retained the changed state for the entire quiet interval of 2 minutes or the RSVP sessions that changed state during multiple intervals until a maximum interval of 10 minutes has elapsed. Each bit location in vRtrMplsXCNotifRednIndicesBitMap corresponds to a created or deleted row entry in vRtrMplsXCTable as identified by the value of vRtrMplsXCIndex. This index is same as the value of TIMETRA-RSVP-MIB::vRtrRsvpSessionIndex which corresponds to a created or deleted RSVP session entry in TIMETRA-RSVP-MIB::vRtrRsvpSessionTable. The value of vRtrMplsXCNotifyRednStartIndex indicates the index value of the first affected row entry represented by bit 0, the most significant bit. If the value of vRtrMplsXCNotifyRednBundlingType is set to 'create (2)', all the bits set in vRtrMplsXCNotifRednIndicesBitMap represent created RSVP sessions. If the value of vRtrMplsXCNotifyRednBundlingType is set to 'delete (1)', all the bits set in vRtrMplsXCNotifRednIndicesBitMap represent deleted RSVP sessions.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..1000)

vRtrMplsXCNotifyRednBundlingType		1.3.6.1.4.1.6527.3.1.2.6.16.16
The value of vRtrMplsXCNotifyRednBundlingType indicates whether this notification is generated for deletion or creation of RSVP sessions on this ingress, transit or egress router instance.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	delete(1), create(2)

vRtrMplsXCNotifyRednNumOfBitsSet		1.3.6.1.4.1.6527.3.1.2.6.16.17
The value of vRtrMplsXCNotifyRednNumOfBitsSet indicates the total number of bits set in vRtrMplsXCNotifRednIndicesBitMap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

vRtrMplsXCNotifyRednStartIndex		1.3.6.1.4.1.6527.3.1.2.6.16.18
The value of vRtrMplsXCNotifyRednStartIndex indicates which vRtrMplsXCIndex is represented by the first bit in vRtrMplsXCNotifRednIndicesBitMap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

vRtrMplsXCNotifyRednEndIndex		1.3.6.1.4.1.6527.3.1.2.6.16.19
The value of vRtrMplsXCNotifyRednEndIndex indicates which vRtrMplsXCIndex is represented by the last bit in vRtrMplsXCNotifRednIndicesBitMap. The value vRtrMplsXCNotifyRednEndIndex can be useful for a sanity check of vRtrMplsXCNotifyRednNumOfBitsSet. vRtrMplsXCNotifyRednNumOfBitsSet. = (vRtrMplsXCNotifyRednEndIndex - vRtrMplsXCNotifyRednStartIndex + 1).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

vRtrMplsStateChange		1.3.6.1.4.1.6527.3.1.3.6.0.1
This Notification is generated when the MPLS module changes state
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsIfStateChange		1.3.6.1.4.1.6527.3.1.3.6.0.2
This Notification is generated when the MPLS interface changes state
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspUp		1.3.6.1.4.1.6527.3.1.3.6.0.3
This Notification is generated when a LSP transitions to the 'inService' state from any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspDown		1.3.6.1.4.1.6527.3.1.3.6.0.4
This Notification is generated when a LSP transitions out of 'inService' state to any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspPathUp		1.3.6.1.4.1.6527.3.1.3.6.0.5
This Notification is generated when a LSP Path transitions to the 'inService' state from any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspPathDown		1.3.6.1.4.1.6527.3.1.3.6.0.6
This Notification is generated when a LSP Path transitions out of 'inService' state to any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspPathRerouted		1.3.6.1.4.1.6527.3.1.3.6.0.7
The vRtrMplsLspPathRerouted notification is generated when an LSP Path is rerouted.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspPathResignaled		1.3.6.1.4.1.6527.3.1.3.6.0.8
The vRtrMplsLspPathResignaled notification is generated when an LSP Path is resignaled. The vRtrMplsLspPathLastMBBType indicates the reason why the LSP Path was resignaled.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsP2mpInstanceUp		1.3.6.1.4.1.6527.3.1.3.6.0.9
This Notification is generated when a P2MP instance transitions to the 'inService' state from any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsP2mpInstanceDown		1.3.6.1.4.1.6527.3.1.3.6.0.10
This Notification is generated when a P2MP instance transitions out of 'inService' state to any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsS2lSubLspUp		1.3.6.1.4.1.6527.3.1.3.6.0.11
This Notification is generated when a S2l sub LSP transitions to the 'inService' state from any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsS2lSubLspDown		1.3.6.1.4.1.6527.3.1.3.6.0.12
This Notification is generated when a S2l sub LSP transitions out of 'inService' state to any other state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsS2lSubLspRerouted		1.3.6.1.4.1.6527.3.1.3.6.0.13
The vRtrMplsS2lSubLspRerouted notification is generated when an S2l sub LSP is rerouted.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsS2lSubLspResignaled		1.3.6.1.4.1.6527.3.1.3.6.0.14
The vRtrMplsS2lSubLspResignaled notification is generated when an S2l sub LSP is resignaled. The vRtrMplsS2lSubLspLastMBBType indicates the reason why the S2l sub LSP was resignaled.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspPathSoftPreempted		1.3.6.1.4.1.6527.3.1.3.6.0.15
The vRtrMplsLspPathSoftPreempted notification is generated when an LSP Path is soft-preempted.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspPathLstFillReoptElig		1.3.6.1.4.1.6527.3.1.3.6.0.16
The vRtrMplsLspPathLstFillReoptElig notification is generated when a timer based re-signal found a path with the same cost but which has a better least-fill metric.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsP2mpInstanceResignaled		1.3.6.1.4.1.6527.3.1.3.6.0.17
This Notification is generated when a P2MP instance is resignaled. The vRtrMplsP2mpInstLastMBBType indicates the reason why the P2MP instance was resignaled.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsResignalTimerExpired		1.3.6.1.4.1.6527.3.1.3.6.0.18
The vRtrMplsResignalTimerExpired notification is generated when the resignal timer expires for a MPLS instance. Make before break (MBB) would be started only on those P2P LSP (Point to Point) paths that need to be resignaled. vRtrMplsGeneralResignalTimer would be reset once this notification is sent.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspPathMbbStatusEvent		1.3.6.1.4.1.6527.3.1.3.6.0.19
The vRtrMplsLspPathMbbStatusEvent notification is generated to report the status of the make-before-break(MBB) operation for the LSP path.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspSwitchStbyFailure		1.3.6.1.4.1.6527.3.1.3.6.0.20
[CAUSE] The vRtrMplsLspSwitchStbyFailure notification is generated to report an unsuccessful switchover from the current active secondary LSP path of an LSP to another secondary standby LSP path. The reason for the failure is specified by vRtrMplsLspSwitchStbyReasonCode. [EFFECT] The switchover to the new standby path failed for the LSP. [RECOVERY] The vRtrMplsLspSwitchStbyReasonCode will help the user troubleshoot the failure. The user can attempt to switchover to another standby LSP path again.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLspActivePathChanged		1.3.6.1.4.1.6527.3.1.3.6.0.21
[CAUSE] The vRtrMplsLspActivePathChanged notification is generated when the active path of an LSP successfully switches to an new path. This notification will also be sent when the active LSP path does not change but only the switch method changes on the path. The old LSP path index is specified by vRtrMplsLspOldTunnelIndex. The state and switch method of the current active LSP path are specified by vRtrMplsLspPathState and vRtrMplsLspPathActiveByManual respectively. [EFFECT] The switchover to the new LSP path was successful or/and switch method of the current active LSP path changed. [RECOVERY] There is no recovery required for this notification.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsXCBundleChange		1.3.6.1.4.1.6527.3.1.3.6.0.22
[CAUSE] vRtrMplsXCBundleChange is generated when one or more RSVP sessions changed the state and retained the changed state for entire quiet interval of 2 minutes or till it reaches the maximum interval of 10 minutes if the state of RSVP sessions kept on changing during this period of multiple quiet intervals. [EFFECT] RSVP sessions represented by bits in vRtrMplsXCNotifRednIndicesBitMap changed state on this router instance. [RECOVERY] There is no recovery required for this notification.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

vRtrMplsLblRangeModify		1.3.6.1.4.1.6527.3.1.3.6.0.23
[CAUSE] vRtrMplsLblRangeModify is generated when the values of vRtrMplsLabelMaxStaticLspLabels or vRtrMplsLabelMaxStaticSvcLabels have been modified. [EFFECT] The maximum static labels are modified. [RECOVERY] There is no recovery required for this notification.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxMplsCompliances		1.3.6.1.4.1.6527.3.1.1.6.1
OBJECT IDENTIFIER

tmnxMplsGroups		1.3.6.1.4.1.6527.3.1.1.6.2
OBJECT IDENTIFIER

tmnxMplsV3v0Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.3
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 3.0 Release.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsV5v0Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.4
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 5.0 Release.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsV6v0Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.5
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 6.0 Release.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsV6v1Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.6
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 6.1 Release.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsV7v0Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.7
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 6.1 Release.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsV8v0Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.8
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 8.0 Release.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsV9v0Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.9
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 9.0 Release.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsV10v0Compliance		1.3.6.1.4.1.6527.3.1.1.6.1.10
The compliance statement for management of extended MPLS on Alcatel-Lucent SROS series systems 10.0 Release.
Status: current	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxMplsLspPathGroup		1.3.6.1.4.1.6527.3.1.1.6.2.3
The group of objects supporting management of extended MPLS LSP to path mapping on Alcatel-Lucent SROS series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsXCGroup		1.3.6.1.4.1.6527.3.1.1.6.2.4
The group of objects supporting management of extended MPLS LSP to cross-connection mapping on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsIfGroup		1.3.6.1.4.1.6527.3.1.1.6.2.5
The group of objects supporting management of extended MPLS interfaces on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsTunnelARHopGroup		1.3.6.1.4.1.6527.3.1.1.6.2.6
The group of objects supporting management of extended MPLS Tunnel AR hops on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsTunnelCHopGroup		1.3.6.1.4.1.6527.3.1.1.6.2.7
The group of objects supporting management of extended MPLS CSPF Tunnel hops on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsAdminGroupGroup		1.3.6.1.4.1.6527.3.1.1.6.2.8
The group of objects supporting management of extended MPLS administrative groups on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsFSGroupGroup		1.3.6.1.4.1.6527.3.1.1.6.2.9
The group of objects supporting management of extended MPLS fate sharing groups on Alcatel-Lucent SROS series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotifyObjsGroup		1.3.6.1.4.1.6527.3.1.1.6.2.10
The group of objects supporting extended MPLS notifications on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsGlobalR2r1Group		1.3.6.1.4.1.6527.3.1.1.6.2.12
The group of objects supporting general management of extended MPLS on Alcatel-Lucent SROS series systems 2.1 Release.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspR2r1Group		1.3.6.1.4.1.6527.3.1.1.6.2.13
The group of objects supporting management of extended MPLS LSPs on Alcatel-Lucent SROS series systems 2.1 Release.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotificationR2r1Group		1.3.6.1.4.1.6527.3.1.1.6.2.14
The group of notifications supporting the extended MPLS feature on Alcatel-Lucent SROS series systems 2.1 Release.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxMplsLabelRangeGroup		1.3.6.1.4.1.6527.3.1.1.6.2.15
The group of objects supporting management of extended MPLS label ranges on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsGlobalV5v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.16
The group of objects supporting general management of extended MPLS on Alcatel-Lucent SROS series systems 5.0 Release.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspV5v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.17
The group of objects supporting management of extended MPLS LSPs on Alcatel-Lucent SROS series systems 5.0 Release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsGlobalV6v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.18
The group of objects supporting general management of extended MPLS on Alcatel-Lucent SROS series systems 6.0 Release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsSrlgV6v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.19
The group of objects supporting management of SRLG on Alcatel 7xxx SR series systems release 6.0.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspPathV6v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.20
The group of objects supporting management of extended MPLS LSP to path mapping on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsIfV6v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.21
The group of objects supporting management of Te metric feature on extended MPLS interfaces on 6.0 release Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspV6v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.22
The group of objects supporting management of Te metric feature extended MPLS LSPs on 6.0 release Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspPathV6v1Group		1.3.6.1.4.1.6527.3.1.1.6.2.23
The group of objects supporting management of extended MPLS LSP to path mapping on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsObsoleteGroup		1.3.6.1.4.1.6527.3.1.1.6.2.24
The group of obsolete objects which are no longer supported in MPLS on 6.0R4 release onwards on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspV7v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.25
The group of objects supporting management of extended LSP in MPLS on on Alcatel-Lucent SROS series systems 7.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsGlobalV7v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.26
The group of all global objects in MPLS supporting management of MPLS features on Alcatel-Lucent SROS series systems 7.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsP2mpInstanceGroup		1.3.6.1.4.1.6527.3.1.1.6.2.27
The group of all P2MP instance related objects supporting management of P2MP feature in MPLS on Alcatel-Lucent SROS series systems 7.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsP2mpS2lGroup		1.3.6.1.4.1.6527.3.1.1.6.2.28
The group of all S2L sub-LSP related objects supporting management of P2MP feature in MPLS on Alcatel-Lucent SROS series systems 7.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotifyObjsV7v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.29
The group of notification objects supporting extended MPLS notifications on Alcatel-Lucent SROS series systems 7.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotificationV7v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.30
The group of notifications supporting the extended MPLS feature on Alcatel-Lucent SROS series systems 7.0 Release.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxMplsLspPathV7v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.31
The group of objects supporting management of extended MPLS LSP to path mapping on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsSrlgV7v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.32
The group of objects supporting management of SRLG on Alcatel-Lucent SROS series systems release 7.0.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspStatsV7v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.33
The group of objects supporting management of egress/ingress statistics on Alcatel-Lucent SROS series systems release 7.0.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspV8v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.34
The group of objects supporting management of extended LSP in MPLS on Alcatel-Lucent SROS series systems 8.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspPathV8v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.35
The group of objects supporting management of extended MPLS LSP to path mapping on Alcatel-Lucent SROS series systems 8.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotifyObjsV8v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.36
The group of notification objects supporting extended MPLS notifications on Alcatel-Lucent SROS series systems 8.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotificationV8v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.37
The group of notifications supporting the extended MPLS feature on Alcatel-Lucent SROS series systems 8.0 Release.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxMplsGlobalV8v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.38
The group of all global objects in MPLS supporting management of MPLS features on Alcatel-Lucent SROS series systems 8.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspTemplateV8v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.39
The group of objects supporting management of LSP Templates in MPLS on Alcatel-Lucent SROS series systems 8.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspAutoBWV8v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.40
The group of all objects supporting management of Auto-Bandwidth in MPLS on Alcatel-Lucent SROS series systems 8.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsGlobalV9v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.41
The group of all global objects in MPLS supporting management of MPLS features on Alcatel-Lucent SROS series systems 9.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspV9v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.42
The group of objects supporting management of extended LSP in MPLS on Alcatel-Lucent SROS series systems 9.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsLspV9v0R4Group		1.3.6.1.4.1.6527.3.1.1.6.2.43
The group of objects supporting management of extended LSP in MPLS on Alcatel-Lucent SROS series systems 9.0R4 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotifyObjsV9v0R4Group		1.3.6.1.4.1.6527.3.1.1.6.2.44
The group of notification objects supporting extended MPLS notifications on Alcatel-Lucent SROS series systems 9.0.R4 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotifV9v0R4Group		1.3.6.1.4.1.6527.3.1.1.6.2.45
The group of notifications supporting the extended MPLS feature on Alcatel-Lucent SROS series systems 9.0.R4 Release.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxMplsLspPathV9v0R4Group		1.3.6.1.4.1.6527.3.1.1.6.2.46
The group of objects supporting management of extended MPLS LSP to path mapping on Alcatel-Lucent SROS series systems 9.0.R4 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsGlobalV10v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.47
The group of all global objects in MPLS supporting management of MPLS features on Alcatel-Lucent SROS series systems 10.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotifyObjsV10v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.48
The group of notification objects supporting extended MPLS notifications on Alcatel-Lucent SROS series systems 10.0 release.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxMplsNotifyV10v0Group		1.3.6.1.4.1.6527.3.1.1.6.2.49
The group of notifications supporting the extended MPLS feature on Alcatel-Lucent SROS series systems 10.0 Release.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxMplsTpGroup		1.3.6.1.4.1.6527.3.1.1.6.2.50
The group of objects supporting management of the MPLS-TP feature on Alcatel-Lucent SROS series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP