TIMETRA-LDP-NG-MIB

File: TIMETRA-LDP-NG-MIB.mib (441393 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB INET-ADDRESS-MIB TIMETRA-GLOBAL-MIB
TIMETRA-VRTR-MIB TIMETRA-TC-MIB TIMETRA-SERV-MIB
TIMETRA-FILTER-MIB TIMETRA-LDP-MIB MPLS-LDP-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter32 Gauge32
Counter64 IpAddress MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP RowStatus
TruthValue TestAndIncr TimeStamp
TimeInterval DisplayString TEXTUAL-CONVENTION
InterfaceIndexOrZero InetAddress InetAddressType
InetAddressPrefixLength timetraSRMIBModules tmnxSRObjs
tmnxSRNotifyPrefix tmnxSRConfs vRtrID
vRtrLdpStatus TmnxAdminState TmnxOperState
TPolicyStatementNameOrEmpty TmnxServId TmnxVcType
TmnxVcId TmnxEnabledDisabled TmnxCBFClasses
TmnxVcIdOrNone ServType SdpId
TdmOptionsSigPkts TdmOptionsCasTrunkFraming TFilterLogId
TFilterID TNamedItemOrEmpty TmnxVRtrMplsLspID
TmnxLdpFECType TNamedItem TmnxMplsLdpNgIdType
TmnxMplsLdpNgIdentifier TmnxMplsLsrNgIdentifier TmnxLdpKeepAliveFactor
TmnxLdpNewKeepAliveTimeout TmnxLdpHelloFactor TmnxLdpNewHelloTimeout
TmnxLdpBackoffTime TmnxLdpAdjacencyType TmnxLdpIntTargOperDownReasonCode
TmnxLdpLabelDistMethod TmnxLdpHelloTimeout TmnxLdpFECFlags
TmnxLabelStatus TmnxVpnId TmnxLabelSigStatus
TmnxLdpInLblWdrawalReasonCode TmnxLdpFec129Tlv vRtrLdpSessOverloadState
vRtrLdpSessOverloadDirection vRtrLdpSessOverloadFecType TmnxLdpGenOperDownReasonCode
TmnxLdpFECPolicy MplsLsrIdentifier

Defined Types

VRtrLdpNgIfEntry  
SEQUENCE    
  vRtrLdpNgIfIndex InterfaceIndexOrZero
  vRtrLdpNgIfRowStatus RowStatus
  vRtrLdpNgIfLastChange TimeStamp
  vRtrLdpNgIfAdminState TmnxAdminState
  vRtrLdpNgIfOperState TmnxOperState
  vRtrLdpNgIfOperDownReason TmnxLdpIntTargOperDownReasonCode
  vRtrLdpNgIfBfdEnabled BITS

VRtrLdpNgHelloAdjEntry  
SEQUENCE    
  vRtrLdpNgPeerLdpIdType TmnxMplsLdpNgIdType
  vRtrLdpNgPeerLdpId TmnxMplsLdpNgIdentifier
  vRtrLdpNgHelloAdjLclLdpIdType TmnxMplsLdpNgIdType
  vRtrLdpNgHelloAdjLclLdpId TmnxMplsLdpNgIdentifier
  vRtrLdpNgHelloAdjEntityIndex Unsigned32
  vRtrLdpNgHelloAdjIndex Unsigned32
  vRtrLdpNgHelloAdjHoldTimeRem Unsigned32
  vRtrLdpNgHelloAdjType TmnxLdpAdjacencyType
  vRtrLdpNgHelloAdjRemConfSeqNum Unsigned32
  vRtrLdpNgHelloAdjRemIpAddrType InetAddressType
  vRtrLdpNgHelloAdjRemIpAddress InetAddress
  vRtrLdpNgHelloAdjUpTime TimeInterval
  vRtrLdpNgHelloAdjLclConfSeqNum Unsigned32
  vRtrLdpNgHelloAdjLclIpAddrType InetAddressType
  vRtrLdpNgHelloAdjLclIpAddress InetAddress
  vRtrLdpNgHelloAdjInHelloMsgCnt Counter32
  vRtrLdpNgHelloAdjOutHelloMsgCnt Counter32
  vRtrLdpNgHelloAdjLclTimeout TmnxLdpHelloTimeout
  vRtrLdpNgHelloAdjRemTimeout TmnxLdpHelloTimeout
  vRtrLdpNgHelloAdjBfdStatus INTEGER
  vRtrLdpNgHelloAdjLclIPv4P2MPCap TruthValue
  vRtrLdpNgHelloAdjRemIPv4P2MPCap TruthValue
  vRtrLdpNgHelloAdjLclIPv6P2MPCap TruthValue
  vRtrLdpNgHelloAdjRemIPv6P2MPCap TruthValue
  vRtrLdpNgHelloAdjLclIPv4PfxCap TruthValue
  vRtrLdpNgHelloAdjRemIPv4PfxCap TruthValue
  vRtrLdpNgHelloAdjLclIPv6PfxCap TruthValue
  vRtrLdpNgHelloAdjRemIPv6PfxCap TruthValue
  vRtrLdpNgHelloAdjPeerCapRecv BITS

VRtrLdpNgSessionEntry  
SEQUENCE    
  vRtrLdpNgSessLocalLdpIdType TmnxMplsLdpNgIdType
  vRtrLdpNgSessLocalLdpId TmnxMplsLdpNgIdentifier
  vRtrLdpNgSessEntityIndex Unsigned32
  vRtrLdpNgSessLabelDistMethod TmnxLdpLabelDistMethod
  vRtrLdpNgSessLoopDetectForPV INTEGER
  vRtrLdpNgSessPathVectorLimit Unsigned32
  vRtrLdpNgSessState INTEGER
  vRtrLdpNgSessAdjacencyType TmnxLdpAdjacencyType
  vRtrLdpNgSessProtocolVersion Unsigned32
  vRtrLdpNgSessLocalUdpPort Unsigned32
  vRtrLdpNgSessPeerUdpPort Unsigned32
  vRtrLdpNgSessLocalTcpPort Unsigned32
  vRtrLdpNgSessPeerTcpPort Unsigned32
  vRtrLdpNgSessLocalAddrType InetAddressType
  vRtrLdpNgSessLocalAddress InetAddress
  vRtrLdpNgSessPeerAddrType InetAddressType
  vRtrLdpNgSessPeerAddress InetAddress
  vRtrLdpNgSessKAHoldTimeRemaining TimeInterval
  vRtrLdpNgSessMaxPduLength Unsigned32
  vRtrLdpNgSessUpTime TimeInterval
  vRtrLdpNgSessLocalKATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgSessPeerKATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgSessAdvertise INTEGER
  vRtrLdpNgSessLclGRHelperState TruthValue
  vRtrLdpNgSessPeerGRState TruthValue
  vRtrLdpNgSessPeerNumRestart Counter32
  vRtrLdpNgSessLastRestartTime TimeStamp
  vRtrLdpNgSessLocalFtReconTime Unsigned32
  vRtrLdpNgSessPeerFtReconTime Unsigned32
  vRtrLdpNgSessLocalFtRecovTime Unsigned32
  vRtrLdpNgSessPeerFtRecovTime Unsigned32
  vRtrLdpNgSessFtReconTimeRem Unsigned32
  vRtrLdpNgSessFtRecovTimeRem Unsigned32
  vRtrLdpNgSessBfdStatus INTEGER
  vRtrLdpNgSessLocalP2MPCap TruthValue
  vRtrLdpNgSessPeerP2MPCap TruthValue
  vRtrLdpNgSessLocalMPMBBCap TruthValue
  vRtrLdpNgSessPeerMPMBBCap TruthValue
  vRtrLdpNgSessLocalDynCap TruthValue
  vRtrLdpNgSessPeerDynCap TruthValue
  vRtrLdpNgSessLocalOLoadCap TruthValue
  vRtrLdpNgSessPeerOLoadCap TruthValue
  vRtrLdpNgSessIPv4PfxFecOLoadSent TruthValue
  vRtrLdpNgSessIPv6PfxFecOLoadSent TruthValue
  vRtrLdpNgSessIPv4PfxFecOLoadRecv TruthValue
  vRtrLdpNgSessIPv6PfxFecOLoadRecv TruthValue
  vRtrLdpNgSessIPv4P2MPFecOLSent TruthValue
  vRtrLdpNgSessIPv6P2MPFecOLSent TruthValue
  vRtrLdpNgSessIPv4P2MPFecOLRecv TruthValue
  vRtrLdpNgSessIPv6P2MPFecOLRecv TruthValue
  vRtrLdpNgSessSvcFec128OLoadSent TruthValue
  vRtrLdpNgSessSvcFec128OLoadRecv TruthValue
  vRtrLdpNgSessSvcFec129OLoadSent TruthValue
  vRtrLdpNgSessSvcFec129OLoadRecv TruthValue
  vRtrLdpNgSessLocalIPv4PfxFecCap TruthValue
  vRtrLdpNgSessPeerIPv4PfxFecCap TruthValue
  vRtrLdpNgSessLocalIPv6PfxFecCap TruthValue
  vRtrLdpNgSessPeerIPv6PfxFecCap TruthValue
  vRtrLdpNgSessLocalSvcFec128Cap TruthValue
  vRtrLdpNgSessPeerSvcFec128Cap TruthValue
  vRtrLdpNgSessLocalSvcFec129Cap TruthValue
  vRtrLdpNgSessPeerSvcFec129Cap TruthValue
  vRtrLdpNgSessOperMaxFecThreshold Unsigned32
  vRtrLdpNgSessPeerCapRecv BITS
  vRtrLdpNgSessLocalUnregNotiCap TruthValue
  vRtrLdpNgSessPeerUnregNotiCap TruthValue
  vRtrLdpNgSessEndOfLibSent BITS
  vRtrLdpNgSessEndOfLibRecv BITS

VRtrLdpNgTargPeerTunnelLspEntry  
SEQUENCE    
  vRtrLdpNgTargPeerLspId TmnxVRtrMplsLspID
  vRtrLdpNgTargPeerLspRowStatus RowStatus

VRtrLdpNgSessionParamsEntry  
SEQUENCE    
  vRtrLdpNgSessParamRowStatus RowStatus
  vRtrLdpNgSessParamDODLblDistrib TruthValue
  vRtrLdpNgSessParamImportPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamImportPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamImportPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamImportPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamImportPolicy5 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessFec129CiscoInterop TruthValue
  vRtrLdpNgSessParamAdvAdjAddrOnly TruthValue
  vRtrLdpNgSessPeIDMacFlushInterop TruthValue
  vRtrLdpNgSessParamIPv4PfxFecCap TmnxEnabledDisabled
  vRtrLdpNgSessParamIPv6PfxFecCap TmnxEnabledDisabled
  vRtrLdpNgSessParamP2MPFecCap TmnxEnabledDisabled
  vRtrLdpNgSessParamMaxFec Unsigned32
  vRtrLdpNgSessParamMaxFecLogOnly TruthValue
  vRtrLdpNgSessParamMaxFecThold Unsigned32
  vRtrLdpNgSessParamAddrExpPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamAddrExpPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamAddrExpPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamAddrExpPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgSessParamAddrExpPolicy5 TPolicyStatementNameOrEmpty

VRtrLdpNgSessionAddrEntry  
SEQUENCE    
  vRtrLdpNgSessAddrLclLdpIdType TmnxMplsLdpNgIdType
  vRtrLdpNgSessionAddrLocalLdpId TmnxMplsLdpNgIdentifier
  vRtrLdpNgSessionAddrNumInAddrs Unsigned32
  vRtrLdpNgSessionAddrNumOutAddrs Unsigned32

VRtrLdpNgSessionInAddrEntry  
SEQUENCE    
  vRtrLdpNgSessionInAddrAddrType InetAddressType
  vRtrLdpNgSessionInAddrAddress InetAddress
  vRtrLdpNgSessInAddrLclLdpIdType TmnxMplsLdpNgIdType
  vRtrLdpNgSessionInAddrLocalLdpId TmnxMplsLdpNgIdentifier

VRtrLdpNgSessionOutAddrEntry  
SEQUENCE    
  vRtrLdpNgSessionOutAddrAddrType InetAddressType
  vRtrLdpNgSessionOutAddrAddress InetAddress
  vRtrLdpNgSessOutAddrLclLdpIdType TmnxMplsLdpNgIdType
  vRtrLdpNgSessionOutAddrLclLdpId TmnxMplsLdpNgIdentifier

VRtrLdpNgAddrFecEntry  
SEQUENCE    
  vRtrLdpNgAddrFecFecType TmnxLdpFECType
  vRtrLdpNgAddrFecIpPrefixType InetAddressType
  vRtrLdpNgAddrFecIpPrefix InetAddress
  vRtrLdpNgAddrFecIpPrefixLen InetAddressPrefixLength
  vRtrLdpNgAddrFecFlags TmnxLdpFECFlags
  vRtrLdpNgAddrFecNumInLabels Unsigned32
  vRtrLdpNgAddrFecNumOutLabels Unsigned32

VRtrLdpAddrFecInLblEntry  
SEQUENCE    
  vRtrLdpNgAddrFecInLblId Unsigned32
  vRtrLdpNgAddrFecInLbl Unsigned32
  vRtrLdpNgAddrFecInLblStatus TmnxLabelStatus
  vRtrLdpNgAddrFecInLblIfIndex InterfaceIndexOrZero

VRtrLdpNgAddrFecOutLblEntry  
SEQUENCE    
  vRtrLdpNgAddrFecOutLblId Unsigned32
  vRtrLdpNgAddrFecOutLbl Unsigned32
  vRtrLdpNgAddrFecOutLblStatus TmnxLabelStatus
  vRtrLdpNgAddrFecOutLblIfIndex InterfaceIndexOrZero
  vRtrLdpNgAddrFecOutLblNHType InetAddressType
  vRtrLdpNgAddrFecOutLblNHAddr InetAddress
  vRtrLdpNgAddrFecOutLblMetric Unsigned32
  vRtrLdpNgAddrFecOutLblMtu Unsigned32
  vRtrLdpNgAddrFecOutLblLspId Unsigned32

VRtrLdpNgAddrFecMapEntry  
SEQUENCE    
  vRtrLdpNgAddrFecMapFlags TmnxLdpFECFlags
  vRtrLdpNgAddrFecMapNumInLabels Unsigned32
  vRtrLdpNgAddrFecMapNumOutLabels Unsigned32

VRtrLdpNgExtP2MPFecEntry  
SEQUENCE    
  vRtrLdpNgExtP2MPFecOpaqueType Unsigned32
  vRtrLdpNgExtP2MPFecOpaqueLength Unsigned32
  vRtrLdpNgExtP2MPFecOpaqueValue OCTET STRING
  vRtrLdpNgExtP2MPFecRootAddrType InetAddressType
  vRtrLdpNgExtP2MPFecRootAddress InetAddress
  vRtrLdpNgExtP2MPFecFlags TmnxLdpFECFlags
  vRtrLdpNgExtP2MPFecNumInLabels Gauge32
  vRtrLdpNgExtP2MPFecNumOutLabels Gauge32
  vRtrLdpNgExtP2MPFecTunnelIfId Unsigned32
  vRtrLdpNgExtP2MPFecMetric Unsigned32
  vRtrLdpNgExtP2MPFecMTU Unsigned32

VRtrLdpNgExtP2MPFecInLblEntry  
SEQUENCE    
  vRtrLdpNgExtP2MPFecInLblId Unsigned32
  vRtrLdpNgExtP2MPFecInLbl Unsigned32
  vRtrLdpNgExtP2MPFecInLblStatus TmnxLabelStatus

VRtrLdpNgExtP2MPFecOutLblEntry  
SEQUENCE    
  vRtrLdpNgExtP2MPFecOutLblId Unsigned32
  vRtrLdpNgExtP2MPFecOutLbl Unsigned32
  vRtrLdpNgExtP2MPFecOutLblStatus TmnxLabelStatus
  vRtrLdpNgExtP2MPFecOutLblNHType InetAddressType
  vRtrLdpNgExtP2MPFecOutLblNHAdr InetAddress
  vRtrLdpNgExtP2MPFecOutLblIfIndex InterfaceIndexOrZero
  vRtrLdpNgExtP2MPFecOutLblLspId Unsigned32

VRtrLdpNgExtP2MPFecMapEntry  
SEQUENCE    
  vRtrLdpNgExtP2MPFecMapFlags TmnxLdpFECFlags
  vRtrLdpNgExtP2MPFecMapNumInLbls Gauge32
  vRtrLdpNgExtP2MPFecMapNumOutLbls Gauge32
  vRtrLdpNgExtP2MPFecMapTunnelIfId Unsigned32
  vRtrLdpNgExtP2MPFecMapMetric Unsigned32
  vRtrLdpNgExtP2MPFecMapMTU Unsigned32

VRtrLdpNgInetIfStatsEntry  
SEQUENCE    
  vRtrLdpNgInetIfStatsExistingAdj Gauge32
  vRtrLdpNgInetIfStatsHelloRecv Gauge32
  vRtrLdpNgInetIfStatsHelloSent Gauge32
  vRtrLdpNgInetIfStatsBadPduLen Gauge32
  vRtrLdpNgInetIfStatsBadMsgLen Gauge32
  vRtrLdpNgInetIfStatsMalformedTlv Gauge32
  vRtrLdpNgInetIfStatsBadProtoVer Gauge32

VRtrLdpNgSessionStatsEntry  
SEQUENCE    
  vRtrLdpNgSessStatsTargAdj Gauge32
  vRtrLdpNgSessStatsLinkAdj Gauge32
  vRtrLdpNgSessStatsHelloIn Counter32
  vRtrLdpNgSessStatsHelloOut Counter32
  vRtrLdpNgSessStatsKeepaliveIn Counter32
  vRtrLdpNgSessStatsKeepaliveOut Counter32
  vRtrLdpNgSessStatsInitIn Counter32
  vRtrLdpNgSessStatsInitOut Counter32
  vRtrLdpNgSessStatsLblMappingIn Counter32
  vRtrLdpNgSessStatsLblMappingOut Counter32
  vRtrLdpNgSessStatsLblRequestIn Counter32
  vRtrLdpNgSessStatsLblRequestOut Counter32
  vRtrLdpNgSessStatsLblReleaseIn Counter32
  vRtrLdpNgSessStatsLblReleaseOut Counter32
  vRtrLdpNgSessStatsLblWithdrawIn Counter32
  vRtrLdpNgSessStatsLblWithdrawOut Counter32
  vRtrLdpNgSessStatsLblAbortIn Counter32
  vRtrLdpNgSessStatsLblAbortOut Counter32
  vRtrLdpNgSessStatsAddrIn Counter32
  vRtrLdpNgSessStatsAddrOut Counter32
  vRtrLdpNgSessStatsAddrWithdrIn Counter32
  vRtrLdpNgSessStatsAddrWithdrOut Counter32
  vRtrLdpNgSessStatsNotifIn Counter32
  vRtrLdpNgSessStatsNotifOut Counter32
  vRtrLdpNgSessStatsIPv4PfxFecRcv Counter32
  vRtrLdpNgSessStatsIPv6PfxFecRcv Counter32
  vRtrLdpNgSessStatsIPv4PfxFecSnt Counter32
  vRtrLdpNgSessStatsIPv6PfxFecSnt Counter32
  vRtrLdpNgSessStatsIPv4P2MPFecRcv Counter32
  vRtrLdpNgSessStatsIPv6P2MPFecRcv Counter32
  vRtrLdpNgSessStatsIPv4P2MPFecSnt Counter32
  vRtrLdpNgSessStatsIPv6P2MPFecSnt Counter32
  vRtrLdpNgSessStatsSvcFec128Recv Counter32
  vRtrLdpNgSessStatsSvcFec128Sent Counter32
  vRtrLdpNgSessStatsSvcFec129Recv Counter32
  vRtrLdpNgSessStatsSvcFec129Sent Counter32
  vRtrLdpNgSessStatsIPv4AddrRecv Counter32
  vRtrLdpNgSessStatsIPv6AddrRecv Counter32
  vRtrLdpNgSessStatsIPv4AddrSent Counter32
  vRtrLdpNgSessStatsIPv6AddrSent Counter32
  vRtrLdpNgSessStatsCapabilityIn Counter32
  vRtrLdpNgSessStatsCapabilityOut Counter32

VLdpNgSvcFec128Entry  
SEQUENCE    
  vLdpNgFec128FecType TmnxLdpFECType
  vLdpNgFec128VcType TmnxVcType
  vLdpNgFec128VcId TmnxVcId
  vLdpNgFec128ServType ServType
  vLdpNgFec128ServId TmnxServId
  vLdpNgFec128VpnId TmnxVpnId
  vLdpNgFec128Flags TmnxLdpFECFlags
  vLdpNgFec128NumInLabels Unsigned32
  vLdpNgFec128NumOutLabels Unsigned32
  vLdpNgFec128SdpId SdpId
  vLdpNgFec128MateEndptVcId TmnxVcIdOrNone
  vLdpNgFec128MateEndptSdpId SdpId

VLdpNgSvcFec128InLblEntry  
SEQUENCE    
  vLdpNgFec128InLabelId Unsigned32
  vLdpNgFec128InLabel Unsigned32
  vLdpNgFec128InLabelStatus TmnxLabelStatus
  vLdpNgFec128InLabelSigStatus TmnxLabelSigStatus
  vLdpNgFec128InLblWdwReason TmnxLdpInLblWdrawalReasonCode
  vLdpNgFec128InLblMaxCellConcat Unsigned32
  vLdpNgFec128InLblFLTxCap TruthValue
  vLdpNgFec128InLblFLRxCap TruthValue
  vLdpNgFec128InLblIPv4CeIpAdType InetAddressType
  vLdpNgFec128InLblIPv4CeIpAddr InetAddress
  vLdpNgFec128InLblIPv4Cap TruthValue
  vLdpNgFec128InLblIPv6Cap TruthValue
  vLdpNgFec128InLblMTU Unsigned32
  vLdpNgFec128InLblVlanTag Unsigned32
  vLdpNgFec128InLblVccvCV BITS
  vLdpNgFec128InLblVccvCC BITS
  vLdpNgFec128InLblPwStatus TruthValue

VLdpNgSvcFec128OutLblEntry  
SEQUENCE    
  vLdpNgFec128OutLabelId Unsigned32
  vLdpNgFec128OutLabel Unsigned32
  vLdpNgFec128OutLabelStatus TmnxLabelStatus
  vLdpNgFec128OutLabelSigStatus TmnxLabelSigStatus
  vLdpNgFec128OutLblMaxCellConcat Unsigned32
  vLdpNgFec128OutLblFLTxCap TruthValue
  vLdpNgFec128OutLblFLRxCap TruthValue
  vLdpNgFec128OutLblIPv4CeAddrType InetAddressType
  vLdpNgFec128OutLblIPv4CeIpAddr InetAddress
  vLdpNgFec128OutLblIPv4Cap TruthValue
  vLdpNgFec128OutLblIPv6Cap TruthValue
  vLdpNgFec128OutLblMTU Unsigned32
  vLdpNgFec128OutLblVlanTag Unsigned32
  vLdpNgFec128OutLblVccvCV BITS
  vLdpNgFec128OutLblVccvCC BITS
  vLdpNgFec128OutLblPwStatus TruthValue

VRtrLdpNgHelloAdjMapEntry  
SEQUENCE    
  vRtrLdpNgHelloAdjMapLdpIdType TmnxMplsLdpNgIdType
  vRtrLdpNgHelloAdjMapLdpId TmnxMplsLdpNgIdentifier
  vRtrLdpNgHelloAdjMapIndex Unsigned32

VLdpNgSvcFec129Entry  
SEQUENCE    
  vLdpNgFec129AgiType Unsigned32
  vLdpNgFec129AgiLen Unsigned32
  vLdpNgFec129AgiVal OCTET STRING
  vLdpNgFec129SrcAiiType Unsigned32
  vLdpNgFec129SrcAiiLen Unsigned32
  vLdpNgFec129SrcAiiVal OCTET STRING
  vLdpNgFec129TgtAiiType Unsigned32
  vLdpNgFec129TgtAiiLen Unsigned32
  vLdpNgFec129TgtAiiVal OCTET STRING
  vLdpNgFec129ServType ServType
  vLdpNgFec129ServId TmnxServId
  vLdpNgFec129VpnId TmnxVpnId
  vLdpNgFec129Flags TmnxLdpFECFlags
  vLdpNgFec129NumInLabels Unsigned32
  vLdpNgFec129NumOutLabels Unsigned32
  vLdpNgFec129SdpId SdpId
  vLdpNgFec129MateAgiType Unsigned32
  vLdpNgFec129MateAgiLen Unsigned32
  vLdpNgFec129MateAgiVal OCTET STRING
  vLdpNgFec129MateSrcAiiType Unsigned32
  vLdpNgFec129MateSrcAiiLen Unsigned32
  vLdpNgFec129MateSrcAiiVal OCTET STRING
  vLdpNgFec129MateTgtAiiType Unsigned32
  vLdpNgFec129MateTgtAiiLen Unsigned32
  vLdpNgFec129MateTgtAiiVal OCTET STRING
  vLdpNgFec129MateSdpId SdpId

VLdpNgSvcFec129InLblEntry  
SEQUENCE    
  vLdpNgFec129InLblId Unsigned32
  vLdpNgFec129InLabel Unsigned32
  vLdpNgFec129InLabelStatus TmnxLabelStatus
  vLdpNgFec129InLblMTU Unsigned32
  vLdpNgFec129InLblVlanTag Unsigned32
  vLdpNgFec129InLblMaxCellConcat Unsigned32
  vLdpNgFec129InLblSigStatus TmnxLabelSigStatus
  vLdpNgFec129InLblIPv4Cap TruthValue
  vLdpNgFec129InLblIPv6Cap TruthValue
  vLdpNgFec129InLblIPv4CeAddrType InetAddressType
  vLdpNgFec129InLblIPv4CeIpAddr InetAddress
  vLdpNgFec129InLblWdwReason TmnxLdpInLblWdrawalReasonCode
  vLdpNgFec129InLblFLTxCap TruthValue
  vLdpNgFec129InLblFLRxCap TruthValue
  vLdpNgFec129InLblVccvCV BITS
  vLdpNgFec129InLblVccvCC BITS
  vLdpNgFec129InLblPwStatus TruthValue

VLdpNgSvcFec129OutLblEntry  
SEQUENCE    
  vLdpNgFec129OutLblId Unsigned32
  vLdpNgFec129OutLabel Unsigned32
  vLdpNgFec129OutLabelStatus TmnxLabelStatus
  vLdpNgFec129OutLblMTU Unsigned32
  vLdpNgFec129OutLblVlanTag Unsigned32
  vLdpNgFec129OutLblMaxCellConcat Unsigned32
  vLdpNgFec129OutLblSigStatus TmnxLabelSigStatus
  vLdpNgFec129OutLblIPv4Cap TruthValue
  vLdpNgFec129OutLblIPv6Cap TruthValue
  vLdpNgFec129OutLblIPv4CeAddrType InetAddressType
  vLdpNgFec129OutLblIPv4CeIpAddr InetAddress
  vLdpNgFec129OutLblFLTxCap TruthValue
  vLdpNgFec129OutLblFLRxCap TruthValue
  vLdpNgFec129OutLblVccvCV BITS
  vLdpNgFec129OutLblVccvCC BITS
  vLdpNgFec129OutLblPwStatus TruthValue

VLdpNgCepTdmFec128InLblEntry  
SEQUENCE    
  vLdpNgCepTdmFec128InLblPayldSize Unsigned32
  vLdpNgCepTdmFec128InLblBitrate Unsigned32
  vLdpNgCepTdmFec128InLblRtpHeader TruthValue
  vLdpNgCepTdmFec128InLblDiffTStmp TruthValue
  vLdpNgCepTdmFec128InLblSigPkts TdmOptionsSigPkts
  vLdpNgCepTdmFec128InLblCasTrunk TdmOptionsCasTrunkFraming
  vLdpNgCepTdmFec128InLblTStmpFreq Unsigned32
  vLdpNgCepTdmFec128InLblPayldType Unsigned32
  vLdpNgCepTdmFec128InLblSsrcId Unsigned32

VLdpNgCepTdmFec128OutLblEntry  
SEQUENCE    
  vLdpNgCepTdmFec128OutLblPyldSze Unsigned32
  vLdpNgCepTdmFec128OutLblBitrate Unsigned32
  vLdpNgCepTdmFec128OutLblRtpHdr TruthValue
  vLdpNgCepTdmFec128OutLblDfTstmp TruthValue
  vLdpNgCepTdmFec128OutLblSigPkts TdmOptionsSigPkts
  vLdpNgCepTdmFec128OutLblCasTrnk TdmOptionsCasTrunkFraming
  vLdpNgCepTdmFec128OutLblTstmpFq Unsigned32
  vLdpNgCepTdmFec128OutLblPyldTyp Unsigned32
  vLdpNgCepTdmFec128OutLblSsrcId Unsigned32

VLdpNgCepTdmFec129InLblEntry  
SEQUENCE    
  vLdpNgCepTdmFec129InLblPayldSize Unsigned32
  vLdpNgCepTdmFec129InLblBitrate Unsigned32
  vLdpNgCepTdmFec129InLblRtpHeader TruthValue
  vLdpNgCepTdmFec129InLblDiffTStmp TruthValue
  vLdpNgCepTdmFec129InLblSigPkts TdmOptionsSigPkts
  vLdpNgCepTdmFec129InLblCasTrunk TdmOptionsCasTrunkFraming
  vLdpNgCepTdmFec129InLblTStmpFreq Unsigned32
  vLdpNgCepTdmFec129InLblPayldType Unsigned32
  vLdpNgCepTdmFec129InLblSsrcId Unsigned32

VLdpNgCepTdmFec129OutLblEntry  
SEQUENCE    
  vLdpNgCepTdmFec129OutLblPyldSize Unsigned32
  vLdpNgCepTdmFec129OutLblBitrate Unsigned32
  vLdpNgCepTdmFec129OutLblRtpHdr TruthValue
  vLdpNgCepTdmFec129OutLblDifTStmp TruthValue
  vLdpNgCepTdmFec129OutLblSigPkts TdmOptionsSigPkts
  vLdpNgCepTdmFec129OutLblCasTrnk TdmOptionsCasTrunkFraming
  vLdpNgCepTdmFec129OutLblTStmpFrq Unsigned32
  vLdpNgCepTdmFec129OutLblPyldType Unsigned32
  vLdpNgCepTdmFec129OutLblSsrcId Unsigned32

VRtrLdpNgStaticFecEntry  
SEQUENCE    
  vRtrLdpNgStaticFecIpPrefixType InetAddressType
  vRtrLdpNgStaticFecIpPrefix InetAddress
  vRtrLdpNgStaticFecIpPrefixLen InetAddressPrefixLength
  vRtrLdpNgStaticFecRowStatus RowStatus
  vRtrLdpNgStaticFecNumInLabel Unsigned32
  vRtrLdpNgStaticFecNumOutLabel Unsigned32

VRtrLdpNgStaticFecInLabelEntry  
SEQUENCE    
  vRtrLdpNgSFecInLabel Unsigned32
  vRtrLdpNgSFecInLabelRowStatus RowStatus
  vRtrLdpNgSFecOperInLabel Unsigned32

VRtrLdpNgStaticFecOutLabelEntry  
SEQUENCE    
  vRtrLdpNgSFecOutLabelType INTEGER
  vRtrLdpNgSFecOutLabelIfName DisplayString
  vRtrLdpNgSFecOutLabelIpAddrType InetAddressType
  vRtrLdpNgSFecOutLabelIpAddr InetAddress
  vRtrLdpNgSFecOutLabelRowStatus RowStatus
  vRtrLdpNgSFecOutLabel Unsigned32

VRtrLdpTargPeerEntry  
SEQUENCE    
  vRtrLdpNgPeerAddressType InetAddressType
  vRtrLdpNgPeerAddress InetAddress
  vRtrLdpNgTargPeerRowStatus RowStatus
  vRtrLdpNgTargPeerLastChange TimeStamp
  vRtrLdpNgTargPeerAdminState TmnxAdminState
  vRtrLdpNgTargPeerOperState TmnxOperState
  vRtrLdpNgTargPeerUpTime TimeInterval
  vRtrLdpNgTargPeerOperDownReason TmnxLdpIntTargOperDownReasonCode
  vRtrLdpNgTargPeerInheritance Unsigned32
  vRtrLdpNgTargPeerKAFactor TmnxLdpKeepAliveFactor
  vRtrLdpNgTargPeerKATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgTargPeerHelloFactor TmnxLdpHelloFactor
  vRtrLdpNgTargPeerHelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgTargPeerOprHelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgTargPeerHelloReduction TruthValue
  vRtrLdpNgTargPeerHelloRdctnFctr Unsigned32
  vRtrLdpNgTargPeerBackoffTime TmnxLdpBackoffTime
  vRtrLdpNgTargPeerMaxBackoffTime TmnxLdpBackoffTime
  vRtrLdpNgTargPeerTunneling TruthValue
  vRtrLdpNgTargPeerBfdEnabled TruthValue
  vRtrLdpNgTargPeerLsrIfIndex InterfaceIndexOrZero
  vRtrLdpNgTargPeerAutoCreate TruthValue
  vRtrLdpNgTargPeerCreator INTEGER
  vRtrLdpNgTargPeerTemplName TNamedItemOrEmpty
  vRtrLdpNgTargPeerLocalIpAddrType InetAddressType
  vRtrLdpNgTargPeerLocalIpAddress InetAddress

VRtrLdpNgTargPeerStatsEntry  
SEQUENCE    
  vRtrLdpNgTargPeerStatExistingAdj Gauge32
  vRtrLdpNgTargPeerStatsHelloRecv Gauge32
  vRtrLdpNgTargPeerStatsHelloSent Gauge32
  vRtrLdpNgTargPeerStatsBadPduLen Gauge32
  vRtrLdpNgTargPeerStatsBadMsgLen Gauge32
  vRtrLdpNgTargPeerStatsMalformTlv Gauge32
  vRtrLdpNgTargPeerStatsBadProtVer Gauge32

VRtrLdpNgInetIfEntry  
SEQUENCE    
  vRtrLdpNgIfAddrType InetAddressType
  vRtrLdpNgInetIfRowStatus RowStatus
  vRtrLdpNgInetIfUpTime TimeInterval
  vRtrLdpNgInetIfLastChange TimeStamp
  vRtrLdpNgInetIfAdminState TmnxAdminState
  vRtrLdpNgInetIfOperState TmnxOperState
  vRtrLdpNgInetIfOperDownReason TmnxLdpIntTargOperDownReasonCode
  vRtrLdpNgInetIfInheritance INTEGER
  vRtrLdpNgInetIfKAFactor TmnxLdpKeepAliveFactor
  vRtrLdpNgInetIfKATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgInetIfHelloFactor TmnxLdpHelloFactor
  vRtrLdpNgInetIfHelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgInetIfOperHelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgInetIfBackoffTime TmnxLdpBackoffTime
  vRtrLdpNgInetIfMaxBackoffTime TmnxLdpBackoffTime
  vRtrLdpNgInetIfTransAddrType INTEGER
  vRtrLdpNgInetIfLsrIfType INTEGER
  vRtrLdpNgInetIfLsrIfIndex InterfaceIndexOrZero
  vRtrLdpNgInetIfIPv4P2MPFecCap TmnxEnabledDisabled
  vRtrLdpNgInetIfIPv6P2MPFecCap TmnxEnabledDisabled
  vRtrLdpNgInetIfIPv4PfxFecCap TmnxEnabledDisabled
  vRtrLdpNgInetIfIPv6PfxFecCap TmnxEnabledDisabled
  vRtrLdpNgInetIfLocalIpAddrType InetAddressType
  vRtrLdpNgInetIfLocalIpAddress InetAddress

VLdpNgStatsEntry  
SEQUENCE    
  vLdpNgStatsIPv4OperDownEvents Counter32
  vLdpNgStatsIPv6OperDownEvents Counter32
  vLdpNgStatsIPv4ActiveSess Gauge32
  vLdpNgStatsIPv6ActiveSess Gauge32
  vLdpNgStatsIPv4ActiveLinkAdj Gauge32
  vLdpNgStatsIPv6ActiveLinkAdj Gauge32
  vLdpNgStatsIPv4ActiveTargAdj Gauge32
  vLdpNgStatsIPv6ActiveTargAdj Gauge32
  vLdpNgStatsIPv4ActiveIf Gauge32
  vLdpNgStatsIPv6ActiveIf Gauge32
  vLdpNgStatsIPv4InactiveIf Gauge32
  vLdpNgStatsIPv6InactiveIf Gauge32
  vLdpNgStatsIPv4ActiveTargPeers Gauge32
  vLdpNgStatsIPv6ActiveTargPeers Gauge32
  vLdpNgStatsIPv4InactiveTargPeers Gauge32
  vLdpNgStatsIPv6InactiveTargPeers Gauge32
  vLdpNgStatsIPv4PfxFecRecv Gauge32
  vLdpNgStatsIPv6PfxFecRecv Gauge32
  vLdpNgStatsIPv4PfxFecSent Gauge32
  vLdpNgStatsIPv6PfxFecSent Gauge32
  vLdpNgStatsFec128FecSent Gauge32
  vLdpNgStatsFec128FecRecv Gauge32
  vLdpNgStatsFec129FecSent Gauge32
  vLdpNgStatsFec129FecRecv Gauge32
  vLdpNgStatsIPv4AttemptedSessions Counter32
  vLdpNgStatsIPv6AttemptedSessions Counter32
  vLdpNgStatsSessRejNoHelloErrs Counter32
  vLdpNgStatsSessRejAdvErrors Counter32
  vLdpNgStatsSessRejMaxPduErrs Counter32
  vLdpNgStatsSessRejLblRngeErrs Counter32
  vLdpNgStatsBadLdpIdErrors Counter32
  vLdpNgStatsBadPduLengthErrors Counter32
  vLdpNgStatsBadMsgLengthErrors Counter32
  vLdpNgStatsBadTlvLengthErrors Counter32
  vLdpNgStatsMalformedTlvErrors Counter32
  vLdpNgStatsKeepAliveExpErrors Counter32
  vLdpNgStatsShutdownNotifRecv Counter32
  vLdpNgStatsShutdownNotifSent Counter32
  vLdpNgStatsIPv4EgrFecPfxCount Counter32
  vLdpNgStatsIPv6EgrFecPfxCount Counter32
  vLdpNgStatsUnknownTlvErrors Counter32
  vLdpNgStatsIPv4P2MPFecSent Gauge32
  vLdpNgStatsIPv6P2MPFecSent Gauge32
  vLdpNgStatsIPv4P2MPFecRecv Gauge32
  vLdpNgStatsIPv6P2MPFecRecv Gauge32
  vLdpNgStatsIPv4PfxFecOLSessSent Gauge32
  vLdpNgStatsIPv6PfxFecOLSessSent Gauge32
  vLdpNgStatsIPv4PfxFecOLSessRecv Gauge32
  vLdpNgStatsIPv6PfxFecOLSessRecv Gauge32
  vLdpNgStatsIPv4P2MPFecOLSessSent Gauge32
  vLdpNgStatsIPv6P2MPFecOLSessSent Gauge32
  vLdpNgStatsIPv4P2MPFecOLSessRecv Gauge32
  vLdpNgStatsIPv6P2MPFecOLSessRecv Gauge32
  vLdpNgStatsFec128FecOLSessSent Gauge32
  vLdpNgStatsFec128FecOLSessRecv Gauge32
  vLdpNgStatsFec129FecOLSessSent Gauge32
  vLdpNgStatsFec129FecOLSessRecv Gauge32
  vLdpNgStatsIPv4OLoadInterfaces Gauge32
  vLdpNgStatsIPv6OLoadInterfaces Gauge32
  vLdpNgStatsIPv4OLoadTargPeers Gauge32
  vLdpNgStatsIPv6OLoadTargPeers Gauge32
  vLdpNgStatsIPv4PfxFecInOLoad Gauge32
  vLdpNgStatsIPv6PfxFecInOLoad Gauge32
  vLdpNgStatsIPv4P2MPFecInOLoad Gauge32
  vLdpNgStatsIPv6P2MPFecInOLoad Gauge32
  vLdpNgStatsFec128FecInOLoad Gauge32
  vLdpNgStatsFec129FecInOLoad Gauge32
  vLdpNgStatsBadProtVersionErrors Gauge32

VRtrLdpNgCapabilityEntry  
SEQUENCE    
  vRtrLdpNgGenP2MPCapability TruthValue
  vRtrLdpNgGenMPMBBCapability TruthValue
  vRtrLdpNgGenDynamicCapability TruthValue
  vRtrLdpNgGenOverloadCapability TruthValue
  vRtrLdpNgGenFec128Capability TruthValue
  vRtrLdpNgGenFec129Capability TruthValue
  vRtrLdpNgGenIPv4PfxFecCapability TruthValue
  vRtrLdpNgGenIPv6PfxFecCapability TruthValue
  vRtrLdpNgGenUnregNotiCapability TruthValue

VRtrLdpNgTcpSessParamsEntry  
SEQUENCE    
  vRtrLdpNgTcpSessPeerAddrType InetAddressType
  vRtrLdpNgTcpSessPeerAddr InetAddress
  vRtrLdpNgTcpSessRowStatus RowStatus
  vRtrLdpNgTcpSessAuth INTEGER
  vRtrLdpNgTcpSessAuthKey OCTET STRING
  vRtrLdpNgTcpSessAuthKeyChain TNamedItemOrEmpty
  vRtrLdpNgTcpSessPMTUDiscovery TruthValue
  vRtrLdpNgTcpSessMinTTLValue Unsigned32

VRtrLdpNgGeneralEntry  
SEQUENCE    
  vRtrLdpNgGenCreateTime TimeStamp
  vRtrLdpNgGenIPv4UpTime TimeInterval
  vRtrLdpNgGenIPv6UpTime TimeInterval
  vRtrLdpNgGenLastChange TimeStamp
  vRtrLdpNgGenAdminState TmnxAdminState
  vRtrLdpNgGenIPv4OperState TmnxOperState
  vRtrLdpNgGenIPv6OperState TmnxOperState
  vRtrLdpNgGenIPv4OperDownReason TmnxLdpGenOperDownReasonCode
  vRtrLdpNgGenIPv6OperDownReason TmnxLdpGenOperDownReasonCode
  vRtrLdpNgGenLdpIPv4LsrId MplsLsrIdentifier
  vRtrLdpNgGenLdpIPv6LsrId TmnxMplsLsrNgIdentifier
  vRtrLdpNgGenProtocolVersion Unsigned32
  vRtrLdpNgGenBackoffTime TmnxLdpBackoffTime
  vRtrLdpNgGenMaxBackoffTime TmnxLdpBackoffTime
  vRtrLdpNgGenTunnelDownDampTime Unsigned32
  vRtrLdpNgGenGracefulRestart TruthValue
  vRtrLdpNgGenGRNbrLiveTime Unsigned32
  vRtrLdpNgGenGRMaxRecoveryTime Unsigned32
  vRtrLdpNgGenLabelWithdrawalDelay Unsigned32
  vRtrLdpNgGenImplicitNull TruthValue
  vRtrLdpNgGenShortTTLPropLocal TruthValue
  vRtrLdpNgGenShortTTLPropTransit TruthValue
  vRtrLdpNgGenMPMBBTime Unsigned32
  vRtrLdpNgGenLdpFrr TruthValue
  vRtrLdpNgGenMcastUpstreamFrr TruthValue
  vRtrLdpNgGenDeaggregateFec TruthValue
  vRtrLdpNgGenControlMode INTEGER
  vRtrLdpNgGenDistMethod TmnxLdpLabelDistMethod
  vRtrLdpNgGenRetentionMode INTEGER
  vRtrLdpNgGenPropagatePolicy TmnxLdpFECPolicy
  vRtrLdpNgGenLoopDetectCap INTEGER
  vRtrLdpNgGenHopLimit Unsigned32
  vRtrLdpNgGenPathVectorLimit Unsigned32
  vRtrLdpNgGenRoutePreference Unsigned32
  vRtrLdpNgGenClassForwarding TruthValue
  vRtrLdpNgGenIpv4LsrInterop TruthValue
  vRtrLdpNgGenEntropyLblCapability TruthValue
  vRtrLdpNgGenFrrSRStitch TruthValue

VRtrLdpNgPolicyEntry  
SEQUENCE    
  vRtrLdpNgPolRowLastCh TimeStamp
  vRtrLdpNgPolImportPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolImportPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolImportPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolImportPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolImportPolicy5 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolTunlTblExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolTunlTblExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolTunlTblExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolTunlTblExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgPolTunlTblExportPolicy5 TPolicyStatementNameOrEmpty

VRtrLdpNgIfParamsEntry  
SEQUENCE    
  vRtrLdpNgIfParamRowLastCh TimeStamp
  vRtrLdpNgIfParamIPv4KAFactor TmnxLdpKeepAliveFactor
  vRtrLdpNgIfParamIPv6KAFactor TmnxLdpKeepAliveFactor
  vRtrLdpNgIfParamIPv4KATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgIfParamIPv6KATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgIfParamIPv4HelloFactor TmnxLdpHelloFactor
  vRtrLdpNgIfParamIPv6HelloFactor TmnxLdpHelloFactor
  vRtrLdpNgIfParamIPv4HelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgIfParamIPv6HelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgIfParamIPv4TransAddrTyp INTEGER
  vRtrLdpNgIfParamIPv6TransAddrTyp INTEGER

VRtrLdpNgTargEntry  
SEQUENCE    
  vRtrLdpNgTargRowLastCh TimeStamp
  vRtrLdpNgTargImportPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargImportPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargImportPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargImportPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargImportPolicy5 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrLdpNgTargTunnelPreference TruthValue
  vRtrLdpNgTargetedSessions TruthValue
  vRtrLdpNgTargIPv4KAFactor TmnxLdpKeepAliveFactor
  vRtrLdpNgTargIPv6KAFactor TmnxLdpKeepAliveFactor
  vRtrLdpNgTargIPv4KATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgTargIPv6KATimeout TmnxLdpNewKeepAliveTimeout
  vRtrLdpNgTargIPv4HelloFactor TmnxLdpHelloFactor
  vRtrLdpNgTargIPv6HelloFactor TmnxLdpHelloFactor
  vRtrLdpNgTargIPv4HelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgTargIPv6HelloTimeout TmnxLdpNewHelloTimeout
  vRtrLdpNgTargIPv4HelloReduction TruthValue
  vRtrLdpNgTargIPv6HelloReduction TruthValue
  vRtrLdpNgTargIPv4HelloReduceFctr Unsigned32
  vRtrLdpNgTargIPv6HelloReduceFctr Unsigned32

VRtrLdpNgAggrPreMatchEntry  
SEQUENCE    
  vRtrLdpNgAggrPreMatchRowLastCh TimeStamp
  vRtrLdpNgAggrPreMatchEnabled TruthValue
  vRtrLdpNgAggrPreMatchExcPolicy1 TPolicyStatementNameOrEmpty
  vRtrLdpNgAggrPreMatchExcPolicy2 TPolicyStatementNameOrEmpty
  vRtrLdpNgAggrPreMatchExcPolicy3 TPolicyStatementNameOrEmpty
  vRtrLdpNgAggrPreMatchExcPolicy4 TPolicyStatementNameOrEmpty
  vRtrLdpNgAggrPreMatchExcPolicy5 TPolicyStatementNameOrEmpty
  vRtrLdpNgAggrPreMatchAdminState TmnxAdminState

VLdpNgAddrActiveFecEntry  
SEQUENCE    
  vLdpNgAddrActiveFecOpType INTEGER
  vLdpNgAddrActiveFecFecFlags TmnxLdpFECFlags
  vLdpNgAddrActiveFecNumInLbls Unsigned32
  vLdpNgAddrActiveFecNumOutLbls Unsigned32

VLdpNgAddrActiveFecInLblEntry  
SEQUENCE    
  vLdpNgAddrActiveFecInLblId Unsigned32
  vLdpNgAddrActiveFecInLbl Unsigned32
  vLdpNgAddrActiveFecInLblIfIndex InterfaceIndexOrZero

VLdpNgAddrActiveFecOutLblEntry  
SEQUENCE    
  vLdpNgAddrActiveFecOutLblId Unsigned32
  vLdpNgAddrActiveFecOutLbl Unsigned32
  vLdpNgAddrActiveFecOutLblStatus TmnxLabelStatus
  vLdpNgAddrActiveFecOutLblIfIdx InterfaceIndexOrZero
  vLdpNgAddrActiveFecOutLblNHType InetAddressType
  vLdpNgAddrActiveFecOutLblNHAddr InetAddress
  vLdpNgAddrActiveFecOutLblMetric Unsigned32
  vLdpNgAddrActiveFecOutLblMtu Unsigned32
  vLdpNgAddrActiveFecOutLblLspId Unsigned32
  vLdpNgAddrActiveFecOutLblCBF TmnxCBFClasses

Defined Values

timetraLdpNgMIBModule 1.3.6.1.4.1.6527.1.1.3.91
The MIB module to manage and provision the Nokia SROS LDP NG protocol features. Copyright 2013-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxLdpNgObjs 1.3.6.1.4.1.6527.3.1.2.91
OBJECT IDENTIFIER    

tmnxLdpNgConformance 1.3.6.1.4.1.6527.3.1.1.91
OBJECT IDENTIFIER    

tmnxLdpNgCompliances 1.3.6.1.4.1.6527.3.1.1.91.1
OBJECT IDENTIFIER    

tmnxLdpNgGroups 1.3.6.1.4.1.6527.3.1.1.91.2
OBJECT IDENTIFIER    

tmnxLdpNgNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.91
OBJECT IDENTIFIER    

tmnxLdpNgNotifications 1.3.6.1.4.1.6527.3.1.3.91.0
OBJECT IDENTIFIER    

vRtrLdpNgIfTableLstChanged 1.3.6.1.4.1.6527.3.1.2.91.1
The value of vRtrLdpNgIfTableLstChanged indicates the last timestamp when an entry in the vRtrLdpNgIfTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgIfTable 1.3.6.1.4.1.6527.3.1.2.91.2
The vRtrLdpNgIfTable provides an entry for each virtual router interface configured to be used with the Label Distribution Protocol (LDP).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgIfEntry

vRtrLdpNgIfEntry 1.3.6.1.4.1.6527.3.1.2.91.2.1
Each row entry represents an interface on this virtual router that participates in the LDP protocol. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgIfRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgIfRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgIfEntry  

vRtrLdpNgIfIndex 1.3.6.1.4.1.6527.3.1.2.91.2.1.1
The value of vRtrLdpNgIfIndex specifies the interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrLdpNgIfRowStatus 1.3.6.1.4.1.6527.3.1.2.91.2.1.2
vRtrLdpNgIfRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgIfTable. A row can be created by setting vRtrLdpNgIfRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgIfRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgIfLastChange 1.3.6.1.4.1.6527.3.1.2.91.2.1.3
The value of vRtrLdpNgIfLastChange indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgIfAdminState 1.3.6.1.4.1.6527.3.1.2.91.2.1.4
The value of vRtrLdpNgIfAdminState specifies the desired administrative state for LDP on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrLdpNgIfOperState 1.3.6.1.4.1.6527.3.1.2.91.2.1.5
The value of vRtrLdpNgIfOperState indicates the current operational state of LDP of this interface
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrLdpNgIfOperDownReason 1.3.6.1.4.1.6527.3.1.2.91.2.1.6
The value of vRtrLdpNgIfOperDownReason indicates the reason that the LDP interface is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpIntTargOperDownReasonCode  

vRtrLdpNgIfBfdEnabled 1.3.6.1.4.1.6527.3.1.2.91.2.1.7
The value of vRtrLdpNgIfBfdEnabled specifies whether BFD tracking is enabled to hello adjacency source address of the peer. When multiple links exist to the same LDP peer, a Hello adjacency is established over each link and a separate BFD session is enabled on each LDP interface. If there are any FEC resolved over this interface, LDP will enable BFD tracking to each next hop. When this object has a value of 'ipv4', BFD tracking is enabled to each resolved ipv4 FEC next hop and or ipv4 hello adjacency over this interface. When this object has a value of 'ipv6', BFD tracking is enabled to each resolved ipv6 FEC next hop and or ipv6 hello adjacency over this interface. In case FEC next hop and hello adjacency source address of the peer is same, only one BFD session is used to track both. When this object has value of 0, BFD tracking is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  BITS ipv4(0), ipv6(1)  

vRtrLdpNgHelloAdjTable 1.3.6.1.4.1.6527.3.1.2.91.3
The vRtrLdpNgHelloAdjTable is a read-only table which has information about Hello Adjacencies for Sessions. A hello adjacency can be associated with an LDP interface or with a targeted peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgHelloAdjEntry

vRtrLdpNgHelloAdjEntry 1.3.6.1.4.1.6527.3.1.2.91.3.1
Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. vRtrLdpNgIfIndex and vRtrLdpNgPeerAddress are mutually exclusive fields. When vRtrLdpNgIfIndex is non zero, vRtrLdpNgPeerAddressType will have value of IPv4 and vRtrLdpNgPeerAddress will be 0.0.0.0. When the value of vRtrLdpNgPeerAddress is non zero, vRtrLdpNgIfIndex will be 0.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgHelloAdjEntry  

vRtrLdpNgPeerLdpIdType 1.3.6.1.4.1.6527.3.1.2.91.3.1.1
The object vRtrLdpNgPeerLdpIdType is an index for the row entry. It indicates the LDP identifier type of the peer indicated by vRtrLdpNgPeerLdpId.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMplsLdpNgIdType  

vRtrLdpNgPeerLdpId 1.3.6.1.4.1.6527.3.1.2.91.3.1.2
The object vRtrLdpNgPeerLdpId is an index for the row entry. It indicates the LDP identifier of the peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMplsLdpNgIdentifier Size(6|18)  

vRtrLdpNgHelloAdjLclLdpIdType 1.3.6.1.4.1.6527.3.1.2.91.3.1.3
The value of vRtrLdpNgHelloAdjLclLdpIdType indicates the local LDP identifier type for this specific adjacency indicated by vRtrLdpNgHelloAdjLclLdpId .
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdType  

vRtrLdpNgHelloAdjLclLdpId 1.3.6.1.4.1.6527.3.1.2.91.3.1.4
The value of vRtrLdpNgHelloAdjLclLdpId indicates the local LDP identifier for this specific adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdentifier Size(6|18)  

vRtrLdpNgHelloAdjEntityIndex 1.3.6.1.4.1.6527.3.1.2.91.3.1.5
The value of vRtrLdpNgHelloAdjEntityIndex indicates the Entity index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vRtrLdpNgHelloAdjIndex 1.3.6.1.4.1.6527.3.1.2.91.3.1.6
The value of vRtrLdpNgHelloAdjIndex indicates the Hello adjacency index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vRtrLdpNgHelloAdjHoldTimeRem 1.3.6.1.4.1.6527.3.1.2.91.3.1.7
The value of vRtrLdpNgHelloAdjHoldTimeRem indicates the hold time remaining for this Hello Adjacency. This interval will change when the next Hello message which corresponds to this Hello Adjacency is received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgHelloAdjType 1.3.6.1.4.1.6527.3.1.2.91.3.1.8
The value of vRtrLdpNgHelloAdjType indicates the type of this Hello Adjacency. If this value is 'link' then this adjacency is a result of a Link Hello. If this value is 'hello', then the adjacency is a result of a Targeted Hello.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpAdjacencyType  

vRtrLdpNgHelloAdjRemConfSeqNum 1.3.6.1.4.1.6527.3.1.2.91.3.1.9
The value of vRtrLdpNgHelloAdjRemConfSeqNum indicates the Configuration sequence number that was in the Hello received when this adjacency started up. This configuration sequence number changes when there is a change of configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgHelloAdjRemIpAddrType 1.3.6.1.4.1.6527.3.1.2.91.3.1.10
The value of vRtrLdpNgHelloAdjRemIpAddrType indicates the type of address indicated by vRtrLdpNgHelloAdjRemIpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgHelloAdjRemIpAddress 1.3.6.1.4.1.6527.3.1.2.91.3.1.11
The value of vRtrLdpNgHelloAdjRemIpAddress indicates the peer IP address of the interface/targeted session that sent hellos for this specific adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgHelloAdjUpTime 1.3.6.1.4.1.6527.3.1.2.91.3.1.12
The value of vRtrLdpNgHelloAdjUpTime indicates the time that this adjacency has been up.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrLdpNgHelloAdjLclConfSeqNum 1.3.6.1.4.1.6527.3.1.2.91.3.1.13
The value of vRtrLdpNgHelloAdjLclConfSeqNum indicates the Configuration sequence number that was used in the Hello sent when this adjacency started up. This configuration sequence number changes when there is a change of configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgHelloAdjLclIpAddrType 1.3.6.1.4.1.6527.3.1.2.91.3.1.14
The value of vRtrLdpNgHelloAdjLclIpAddrType indicates the type of address indicated by vRtrLdpNgHelloAdjLclIpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgHelloAdjLclIpAddress 1.3.6.1.4.1.6527.3.1.2.91.3.1.15
The value of vRtrLdpNgHelloAdjLclIpAddress indicates the local IP address of the interface/targeted session used in Hellos sent for this specific adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgHelloAdjInHelloMsgCnt 1.3.6.1.4.1.6527.3.1.2.91.3.1.16
The value of vRtrLdpNgHelloAdjInHelloMsgCnt indicates the number of Hello messages that have been received for this adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgHelloAdjOutHelloMsgCnt 1.3.6.1.4.1.6527.3.1.2.91.3.1.17
The value of vRtrLdpNgHelloAdjOutHelloMsgCnt indicates the number of Hello messages that have been sent for this adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgHelloAdjLclTimeout 1.3.6.1.4.1.6527.3.1.2.91.3.1.18
The value of vRtrLdpNgHelloAdjLclTimeout indicates the hello timeout used in the Hellos sent for this specific adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpHelloTimeout  

vRtrLdpNgHelloAdjRemTimeout 1.3.6.1.4.1.6527.3.1.2.91.3.1.19
The value of vRtrLdpNgHelloAdjRemTimeout indicates the hello timeout used by the remote end that sent Hellos for this specific adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpHelloTimeout  

vRtrLdpNgHelloAdjBfdStatus 1.3.6.1.4.1.6527.3.1.2.91.3.1.20
The value of vRtrLdpNgHelloAdjBfdStatus indicates the BFD operational status for LDP hello adjacency. If the value of vRtrLdpNgHelloAdjBfdStatus is 'noService', BFD is not enabled for LDP hello adjacency. If the value of the object is 'outOfService', BFD is enabled but it is down and not running. If the value of object is 'inService', BFD is enabled and it is running.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noService(1), inService(2), outOfService(3)  

vRtrLdpNgHelloAdjLclIPv4P2MPCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.21
The value of vRtrLdpNgHelloAdjLclIPv4P2MPCap indicates whether the local peer supports traffic exchange for IPv4 P2MP FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjRemIPv4P2MPCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.22
The value of vRtrLdpNgHelloAdjRemIPv4P2MPCap indicates whether the remote peer supports traffic exchange for IPv4 P2MP FECs. When the 'ipv4P2MPFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjLclIPv6P2MPCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.23
The value of vRtrLdpNgHelloAdjLclIPv6P2MPCap indicates whether the local peer supports traffic exchange for IPv6 P2MP FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjRemIPv6P2MPCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.24
The value of vRtrLdpNgHelloAdjRemIPv6P2MPCap indicates whether the remote peer supports traffic exchange for IPv6 P2MP FECs. When the 'ipv6P2MPFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjLclIPv4PfxCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.25
The value of vRtrLdpNgHelloAdjLclIPv4PfxCap indicates whether the local peer supports traffic exchange for IPv4 Prefix FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjRemIPv4PfxCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.26
The value of vRtrLdpNgHelloAdjRemIPv4PfxCap indicates whether the remote peer supports traffic exchange for IPv4 Prefix FECs. When the 'ipv4PfxFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjLclIPv6PfxCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.27
The value of vRtrLdpNgHelloAdjLclIPv6PfxCap indicates whether the local peer supports traffic exchange for IPv6 Prefix FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjRemIPv6PfxCap 1.3.6.1.4.1.6527.3.1.2.91.3.1.28
The value of vRtrLdpNgHelloAdjRemIPv6PfxCap indicates whether the remote peer supports traffic exchange for IPv6 Prefix FECs. When the 'ipv6PfxFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjPeerCapRecv 1.3.6.1.4.1.6527.3.1.2.91.3.1.29
The value of vRtrLdpNgHelloAdjPeerCapRecv indicates various capabilities signaled by the peer LSR in a hello message. A particular capability bit will be set to 1 when the peer sent capability info in at least one of its hello message.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ipv4PfxFec(0), ipv6PfxFec(1), ipv4P2MPFec(2), ipv6P2MPFec(3)  

vRtrLdpNgSessionTable 1.3.6.1.4.1.6527.3.1.2.91.4
The vRtrLdpNgSessionTable is a read-only table which parallels the mplsLdpSessionTable in the MPLS-LDP-MIB. The purpose of this table is to keep information about a single session between an LDP entity and an LDP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgSessionEntry

vRtrLdpNgSessionEntry 1.3.6.1.4.1.6527.3.1.2.91.4.1
A row in this table represents information about a single session between an LDP entity and an LDP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgSessionEntry  

vRtrLdpNgSessLocalLdpIdType 1.3.6.1.4.1.6527.3.1.2.91.4.1.1
The value of vRtrLdpNgSessLocalLdpIdType indicates the local LDP identifier type for the LDP session indicated by vRtrLdpNgSessLocalLdpId.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdType  

vRtrLdpNgSessLocalLdpId 1.3.6.1.4.1.6527.3.1.2.91.4.1.2
The value of vRtrLdpNgSessLocalLdpId indicates the local LDP identifier for this LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdentifier Size(6|18)  

vRtrLdpNgSessEntityIndex 1.3.6.1.4.1.6527.3.1.2.91.4.1.3
The value of vRtrLdpNgSessEntityIndex indicates the Entity index for the LDP entity represented in this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vRtrLdpNgSessLabelDistMethod 1.3.6.1.4.1.6527.3.1.2.91.4.1.4
The value of vRtrLdpNgSessLabelDistMethod indicates the label distribution method used for this LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpLabelDistMethod  

vRtrLdpNgSessLoopDetectForPV 1.3.6.1.4.1.6527.3.1.2.91.4.1.5
The value of vRtrLdpNgSessLoopDetectForPV indicates whether loop detection based on path vectors is disabled or enabled for this LDP session. If this object has a value of disabled(0), then loop detection is disabled. Otherwise, if this object has a value of enabled(1), then loop detection based on path vectors is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vRtrLdpNgSessPathVectorLimit 1.3.6.1.4.1.6527.3.1.2.91.4.1.6
If the value of vRtrLdpNgSessLoopDetectForPV for this entry is 'enabled', then the value of vRtrLdpNgSessPathVectorLimit represents the Path Vector Limit for this LDP Session. If the value of vRtrLdpNgSessLoopDetectForPV for this entry is 'disabled', then the value of vRtrLdpNgSessPathVectorLimit be 0 (zero).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrLdpNgSessState 1.3.6.1.4.1.6527.3.1.2.91.4.1.7
The value of vRtrLdpNgSessState indicates the current state of the LDP session. All of the states 1 - 5 are based on the state machine for session negotiation behavior.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonexistent(1), initialized(2), openrec(3), opensent(4), operational(5)  

vRtrLdpNgSessAdjacencyType 1.3.6.1.4.1.6527.3.1.2.91.4.1.8
The value of vRtrLdpNgSessAdjacencyType indicates the adjacency type(s) supporting this LDP Session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpAdjacencyType  

vRtrLdpNgSessProtocolVersion 1.3.6.1.4.1.6527.3.1.2.91.4.1.9
The value of vRtrLdpNgSessProtocolVersion indicates the version of the LDP Protocol used by this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessLocalUdpPort 1.3.6.1.4.1.6527.3.1.2.91.4.1.10
The value of vRtrLdpNgSessLocalUdpPort indicates the UDP port used locally for LDP discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrLdpNgSessPeerUdpPort 1.3.6.1.4.1.6527.3.1.2.91.4.1.11
The value of vRtrLdpNgSessPeerUdpPort indicates the UDP port used on the remote end for LDP discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrLdpNgSessLocalTcpPort 1.3.6.1.4.1.6527.3.1.2.91.4.1.12
The value of vRtrLdpNgSessLocalTcpPort indicates the TCP port used locally for the LDP Session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrLdpNgSessPeerTcpPort 1.3.6.1.4.1.6527.3.1.2.91.4.1.13
The value of vRtrLdpNgSessPeerTcpPort indicates the TCP port used on the remote end for the LDP Session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrLdpNgSessLocalAddrType 1.3.6.1.4.1.6527.3.1.2.91.4.1.14
The value of vRtrLdpNgSessLocalAddrType indicates the type of address indicated by vRtrLdpNgSessLocalAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgSessLocalAddress 1.3.6.1.4.1.6527.3.1.2.91.4.1.15
The value of vRtrLdpNgSessLocalAddress indicates the IP address used locally for the LDP Session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgSessPeerAddrType 1.3.6.1.4.1.6527.3.1.2.91.4.1.16
The value of vRtrLdpNgSessPeerAddrType indicates the type of address indicated by vRtrLdpNgSessPeerAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgSessPeerAddress 1.3.6.1.4.1.6527.3.1.2.91.4.1.17
The value of vRtrLdpNgSessPeerAddress indicates the IP address used on the remote end for the LDP Session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgSessKAHoldTimeRemaining 1.3.6.1.4.1.6527.3.1.2.91.4.1.18
The value of vRtrLdpNgSessKAHoldTimeRemaining indicates the keep alive hold time remaining for this LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrLdpNgSessMaxPduLength 1.3.6.1.4.1.6527.3.1.2.91.4.1.19
The value of vRtrLdpNgSessMaxPduLength indicates the maximum allowable length for LDP PDUs for this session. This value may have been negotiated during Session Initialization.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

vRtrLdpNgSessUpTime 1.3.6.1.4.1.6527.3.1.2.91.4.1.20
The value of vRtrLdpNgSessUpTime indicates the time since the session was established.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrLdpNgSessLocalKATimeout 1.3.6.1.4.1.6527.3.1.2.91.4.1.21
The value of vRtrLdpNgSessLocalKATimeout indicates the keepalive timeout used locally for the LDP Session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgSessPeerKATimeout 1.3.6.1.4.1.6527.3.1.2.91.4.1.22
The value of vRtrLdpNgSessPeerKATimeout indicates the keepalive timeout used at the remote end of the LDP Session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgSessAdvertise 1.3.6.1.4.1.6527.3.1.2.91.4.1.23
The value of vRtrLdpNgSessAdvertise indicates the type of FECs that will be transported by the session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER address(1), service(2), addressAndService(3)  

vRtrLdpNgSessLclGRHelperState 1.3.6.1.4.1.6527.3.1.2.91.4.1.24
The value of vRtrLdpNgSessLclGRHelperState indicates whether the local entity of this session is graceful restart helper capable or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerGRState 1.3.6.1.4.1.6527.3.1.2.91.4.1.25
The value of vRtrLdpNgSessPeerGRState indicates whether the peer entity of this session is capable of supporting graceful restart.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerNumRestart 1.3.6.1.4.1.6527.3.1.2.91.4.1.26
The value of vRtrLdpNgSessPeerNumRestart indicates the number of times graceful restart helper was initiated for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessLastRestartTime 1.3.6.1.4.1.6527.3.1.2.91.4.1.27
The value of vRtrLdpNgSessLastRestartTime indicates the last time graceful restart helper was initiated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgSessLocalFtReconTime 1.3.6.1.4.1.6527.3.1.2.91.4.1.28
The value of vRtrLdpNgSessLocalFtReconTime indicates the session's local entity Fault Tolerant(FT) Reconnect Timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessPeerFtReconTime 1.3.6.1.4.1.6527.3.1.2.91.4.1.29
The value of vRtrLdpNgSessPeerFtReconTime indicates the session's peer entity Fault Tolerant(FT) Reconnect Timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessLocalFtRecovTime 1.3.6.1.4.1.6527.3.1.2.91.4.1.30
The value of vRtrLdpNgSessLocalFtRecovTime indicates the session's local entity Fault Tolerant(FT) recovery timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessPeerFtRecovTime 1.3.6.1.4.1.6527.3.1.2.91.4.1.31
The value of vRtrLdpNgSessPeerFtRecovTime indicates the session's peer entity Fault Tolerant(FT) recovery timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessFtReconTimeRem 1.3.6.1.4.1.6527.3.1.2.91.4.1.32
The value of vRtrLdpNgSessFtReconTimeRem indicates the amount of time left before session's Fault Tolerant(FT) reconnect timeout expires. This value is set to lesser of the neighbor advertised FT recovery timeout, vRtrLdpNgSessPeerFtRecovTime and the local recovery timeout, vRtrLdpNgSessLocalFtRecovTime.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessFtRecovTimeRem 1.3.6.1.4.1.6527.3.1.2.91.4.1.33
The value of vRtrLdpNgSessFtRecovTimeRem indicates the amount of time left before session's Fault Tolerant(FT) recovery timeout expires. This value is set to lesser of the neighbor advertised FT recovery timeout, vRtrLdpNgSessPeerFtRecovTime and the local recovery timeout, vRtrLdpNgSessLocalFtRecovTime.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessBfdStatus 1.3.6.1.4.1.6527.3.1.2.91.4.1.34
The value of vRtrLdpNgSessBfdStatus indicates the BFD operational status for the LDP session. If the value of vRtrLdpNgSessBfdStatus is 'noService', BFD is not enabled for the LDP session. If the value of the object is 'outOfService', BFD is enabled but it is down and not running. If the value of object is 'inService', BFD is enabled and it is running.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noService(1), inService(2), outOfService(3)  

vRtrLdpNgSessLocalP2MPCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.35
The value of vRtrLdpNgSessLocalP2MPCap indicates whether the local entity of this session is capable of exchanging P2MP FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerP2MPCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.36
The value of vRtrLdpNgSessPeerP2MPCap indicates whether the peer entity of this session is capable of exchanging P2MP FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessLocalMPMBBCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.37
The value of vRtrLdpNgSessLocalMPMBBCap indicates whether the local entity of this session is capable of Multipoint MBB.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerMPMBBCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.38
The value of vRtrLdpNgSessPeerMPMBBCap indicates whether the peer entity of this session is capable of Multipoint MBB.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessLocalDynCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.39
The value of vRtrLdpNgSessLocalDynCap indicates whether the local entity of this session supports negotiation of LDP session capabilities dynamically.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerDynCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.40
The value of vRtrLdpNgSessPeerDynCap indicates whether the peer entity of this session supports negotiation of LDP session capabilities dynamically.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessLocalOLoadCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.41
The value of vRtrLdpNgSessLocalOLoadCap indicates whether the local entity of this session is capable of signaling LSR Overload Notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerOLoadCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.42
The value of vRtrLdpNgSessPeerOLoadCap indicates whether the peer entity of this session is capable of signaling LSR Overload Notification.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv4PfxFecOLoadSent 1.3.6.1.4.1.6527.3.1.2.91.4.1.43
The value of vRtrLdpNgSessIPv4PfxFecOLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv4 Prefix FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv4 Prefix FEC type and is not ready to receive new Label Mappings for IPv4 Prefix FEC Type. In this state if a Label Mapping Message is received from peer for any IPv4 Prefix FEC type then the Label is returned with a Label Release Message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv6PfxFecOLoadSent 1.3.6.1.4.1.6527.3.1.2.91.4.1.44
The value of vRtrLdpNgSessIPv6PfxFecOLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv6 Prefix FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv6 Prefix FEC type and is not ready to receive new Label Mappings for IPv6 Prefix FEC Type. In this state if a Label Mapping Message is received from peer for any IPv6 Prefix FEC type then the Label is returned with a Label Release Message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv4PfxFecOLoadRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.45
The value of vRtrLdpNgSessIPv4PfxFecOLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv4 Prefix FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv4 Prefix FEC type and is not ready to receive new Label Mappings for any IPv4 Prefix FEC Type. In this state no new Label Mapping Message would be sent to peer for any IPv4 Prefix FEC Type.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv6PfxFecOLoadRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.46
The value of vRtrLdpNgSessIPv6PfxFecOLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv6 Prefix FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv6 Prefix FEC type and is not ready to receive new Label Mappings for any IPv6 Prefix FEC Type. In this state no new Label Mapping Message would be sent to peer for any IPv6 Prefix FEC Type.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv4P2MPFecOLSent 1.3.6.1.4.1.6527.3.1.2.91.4.1.47
The value of vRtrLdpNgSessIPv4P2MPFecOLSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv4 P2MP FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv4 P2MP FEC type and is not ready to receive new Label Mappings for IPv4 P2MP FEC Type. In this state if a Label Mapping Message is received from peer for IPv4 P2MP FEC type then the Label is returned with a Label Release Message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv6P2MPFecOLSent 1.3.6.1.4.1.6527.3.1.2.91.4.1.48
The value of vRtrLdpNgSessIPv6P2MPFecOLSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv6 P2MP FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv6 P2MP FEC type and is not ready to receive new Label Mappings for IPv6 P2MP FEC Type. In this state if a Label Mapping Message is received from peer for IPv6 P2MP FEC type then the Label is returned with a Label Release Message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv4P2MPFecOLRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.49
The value of vRtrLdpNgSessIPv4P2MPFecOLRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv4 P2MP FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv4 P2MP FEC type and is not ready to receive new Label Mappings for IPv4 P2MP FEC Type. In this state no new Label Mapping Message would be sent to peer for IPv4 P2MP FEC Type.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessIPv6P2MPFecOLRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.50
The value of vRtrLdpNgSessIPv6P2MPFecOLRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv6 P2MP FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv6 P2MP FEC type and is not ready to receive new Label Mappings for IPv6 P2MP FEC Type. In this state no new Label Mapping Message would be sent to peer for IPv6 P2MP FEC Type.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessSvcFec128OLoadSent 1.3.6.1.4.1.6527.3.1.2.91.4.1.51
The value of vRtrLdpNgSessSvcFec128OLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for Service FEC 128 Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for Service FEC 128 type and is not ready to receive new Label Mappings for Service FEC 128 Type. In this state if a Label Mapping Message is received from peer for Service FEC 128 type then the Label is returned with a Label Release Message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessSvcFec128OLoadRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.52
The value of vRtrLdpNgSessSvcFec128OLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for Service FEC 128 Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for Service FEC 128 type and is not ready to receive new Label Mappings for Service FEC 128 Type. In this state no new Label Mapping Message would be sent to peer for any Service FEC 128 Type.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessSvcFec129OLoadSent 1.3.6.1.4.1.6527.3.1.2.91.4.1.53
The value of vRtrLdpNgSessSvcFec129OLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for Service FEC 129 Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for Service FEC 129 type and is not ready to receive new Label Mappings for any Service FEC 129 Type. In this state if a Label Mapping Message is received from peer for Service FEC 129 type then the Label is returned with a Label Release Message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessSvcFec129OLoadRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.54
The value of vRtrLdpNgSessSvcFec129OLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for Service FEC 129 Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for Service FEC 129 type and is not ready to receive new Label Mappings for any Service FEC 129 Type. In this state no new Label Mapping Message would be sent to peer for any Service FEC 129 Type.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessLocalIPv4PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.55
The value of vRtrLdpNgSessLocalIPv4PfxFecCap indicates whether the local entity of this session is capable of exchanging IPv4 FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerIPv4PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.56
The value of vRtrLdpNgSessPeerIPv4PfxFecCap indicates whether the peer entity of this session is capable of exchanging IPv4 FECs. When the 'ipv4PfxFec' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessLocalIPv6PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.57
The value of vRtrLdpNgSessLocalIPv6PfxFecCap indicates whether the local entity of this session is capable of exchanging IPv6 FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerIPv6PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.58
The value of vRtrLdpNgSessPeerIPv6PfxFecCap indicates whether the peer entity of this session is capable of exchanging IPv6 FECs. When the 'ipv6PfxFec' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessLocalSvcFec128Cap 1.3.6.1.4.1.6527.3.1.2.91.4.1.59
The value of vRtrLdpNgSessLocalSvcFec128Cap indicates whether the local entity of this session is capable of exchanging PW ID FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerSvcFec128Cap 1.3.6.1.4.1.6527.3.1.2.91.4.1.60
The value of vRtrLdpNgSessPeerSvcFec128Cap indicates whether the peer entity of this session is capable of exchanging PW ID FECs. When the 'fec128' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessLocalSvcFec129Cap 1.3.6.1.4.1.6527.3.1.2.91.4.1.61
The value of vRtrLdpNgSessLocalSvcFec129Cap indicates whether the local entity of this session is capable of exchanging General PW ID FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerSvcFec129Cap 1.3.6.1.4.1.6527.3.1.2.91.4.1.62
The value of vRtrLdpNgSessPeerSvcFec129Cap indicates whether the peer entity of this session is capable of exchanging General PW ID FECs over the session. When the 'fec129' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessOperMaxFecThreshold 1.3.6.1.4.1.6527.3.1.2.91.4.1.63
The value of vRtrLdpNgSessOperMaxFecThreshold indicates the operational percentage of vRtrLdpNgSessParamMaxFec.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessPeerCapRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.64
The value of vRtrLdpNgSessPeerCapRecv indicates various capabilities signaled by the peer LSR. A particular capability bit will be set to 1 when there is at least one capability message sent by peer LSR for a given capability type.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ipv4PfxFec(0), ipv6PfxFec(1), fec128(2), fec129(3)  

vRtrLdpNgSessLocalUnregNotiCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.65
The value of vRtrLdpNgSessLocalUnregNotiCap indicates whether the local entity of this session has sent Unrecognized Notification capability to peer.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeerUnregNotiCap 1.3.6.1.4.1.6527.3.1.2.91.4.1.66
The value of vRtrLdpNgSessPeerUnregNotiCap indicates whether the peer has sent Unrecognized Notification capability.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessEndOfLibSent 1.3.6.1.4.1.6527.3.1.2.91.4.1.67
The value of vRtrLdpNgSessEndOfLibSent indicates whether end of Label Inforamtion Base (LIB) notification has been send to the LDP peer. A particular sent bit will be set to 1 when there is at least one LIB notification sent to the LDP peer for a given service type.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ipv4PfxFec(0), ipv6PfxFec(1), ipv4p2mpFec(2), ipv6p2mpFec(3), fec128(4), fec129(5)  

vRtrLdpNgSessEndOfLibRecv 1.3.6.1.4.1.6527.3.1.2.91.4.1.68
The value of vRtrLdpNgSessEndOfLibRecv indicates whether end of Label Information Base (LIB) notification has been received from the LDP peer. A particular received bit will be set to 1 when there is at least one LIB notification received from the LDP peer for a given service type.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ipv4PfxFec(0), ipv6PfxFec(1), ipv4p2mpFec(2), ipv6p2mpFec(3), fec128(4), fec129(5)  

vRtrLdpNgTargPeerTunlLspTblLstCh 1.3.6.1.4.1.6527.3.1.2.91.5
The value of vRtrLdpNgTargPeerTunlLspTblLstCh indicates the last timestamp when an entry in the vRtrLdpNgTargPeerTunnelLspTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgTargPeerTunnelLspTable 1.3.6.1.4.1.6527.3.1.2.91.6
The vRtrLdpNgTargPeerTunnelLspTable keeps the list of LDP-over-RSVP LSP ids which are currently supported by the application. Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the given MPLS LSP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgTargPeerTunnelLspEntry

vRtrLdpNgTargPeerTunnelLspEntry 1.3.6.1.4.1.6527.3.1.2.91.6.1
A row in this table contains the LSP id information about an LDP interface or targeted peer. Row entry can be only created if there is corresponding targeted peer entry in vRtrLdpNgTargPeerTable. Row entries can be created or deleted via SNMP SET requests. A row is created by setting vRtrLdpNgTargPeerLspRowStatus to 'createAndGo' provided the corresponding LSP id exists as an MPLS lsp. A row entry can be destroyed by setting vRtrLdpNgTargPeerLspRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgTargPeerTunnelLspEntry  

vRtrLdpNgTargPeerLspId 1.3.6.1.4.1.6527.3.1.2.91.6.1.1
The value of vRtrLdpNgTargPeerLspId specifies the LSP id of the LSP associated with the specified interface or targeted peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVRtrMplsLspID 0..65535  

vRtrLdpNgTargPeerLspRowStatus 1.3.6.1.4.1.6527.3.1.2.91.6.1.2
vRtrLdpNgTargPeerLspRowStatus is used to create, delete or control entries in the vRtrLdpNgTargPeerTunnelLspTable. An entry is created by setting vRtrLdpNgTargPeerLspRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgTargPeerLspRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgSessionParamsTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.7
The value of vRtrLdpNgSessionParamsTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgSessionParamsTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgSessionParamsTable 1.3.6.1.4.1.6527.3.1.2.91.8
The vRtrLdpNgSessionParamsTable is used to configure parameters applicable to an LDP session.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgSessionParamsEntry

vRtrLdpNgSessionParamsEntry 1.3.6.1.4.1.6527.3.1.2.91.8.1
Each row entry represents an LDP session to a far end peer. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgSessParamRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgSessParamRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgSessionParamsEntry  

vRtrLdpNgSessParamRowStatus 1.3.6.1.4.1.6527.3.1.2.91.8.1.1
vRtrLdpNgSessParamRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgSessionParamsTable. A row can be created by setting vRtrLdpNgSessParamRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgSessParamRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgSessParamDODLblDistrib 1.3.6.1.4.1.6527.3.1.2.91.8.1.4
The value of vRtrLdpNgSessParamDODLblDistrib specifies whether or not Downstream-On-Demand (DOD) has been enabled for the LDP session. When the value is set to 'true' DOD is enabled for the LDP session.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessParamImportPolicy1 1.3.6.1.4.1.6527.3.1.2.91.8.1.5
The value of vRtrLdpNgSessParamImportPolicy1 specifies the first import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamImportPolicy2 1.3.6.1.4.1.6527.3.1.2.91.8.1.6
The value of vRtrLdpNgSessParamImportPolicy2 specifies the second import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamImportPolicy3 1.3.6.1.4.1.6527.3.1.2.91.8.1.7
The value of vRtrLdpNgSessParamImportPolicy3 specifies the third import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamImportPolicy4 1.3.6.1.4.1.6527.3.1.2.91.8.1.8
The value of vRtrLdpNgSessParamImportPolicy4 specifies the fourth import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamImportPolicy5 1.3.6.1.4.1.6527.3.1.2.91.8.1.9
The value of vRtrLdpNgSessParamImportPolicy5 specifies the fifth import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamExportPolicy1 1.3.6.1.4.1.6527.3.1.2.91.8.1.10
The value of vRtrLdpNgSessParamExportPolicy1 specifies the first export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamExportPolicy2 1.3.6.1.4.1.6527.3.1.2.91.8.1.11
The value of vRtrLdpNgSessParamExportPolicy2 specifies the second export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamExportPolicy3 1.3.6.1.4.1.6527.3.1.2.91.8.1.12
The value of vRtrLdpNgSessParamExportPolicy3 specifies the third export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamExportPolicy4 1.3.6.1.4.1.6527.3.1.2.91.8.1.13
The value of vRtrLdpNgSessParamExportPolicy4 specifies the fourth export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamExportPolicy5 1.3.6.1.4.1.6527.3.1.2.91.8.1.14
The value of vRtrLdpNgSessParamExportPolicy5 specifies the fifth export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessFec129CiscoInterop 1.3.6.1.4.1.6527.3.1.2.91.8.1.15
The value of vRtrLdpNgSessFec129CiscoInterop specifies whether LDP will provide translation between non-compliant FEC 129 formats of Cisco. Peer LDP sessions must be manually configured towards the non-compliant Cisco PEs. When the value of vRtrLdpNgSessFec129CiscoInterop is 'true', Cisco non-compliant format will be used to send and interpret received Label Release messages i.e. the FEC129 SAII and TAII fields will be reversed. When the value of vRtrLdpNgSessFec129CiscoInterop is 'false', Cisco non-compliant format will not be used or supported.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessParamAdvAdjAddrOnly 1.3.6.1.4.1.6527.3.1.2.91.8.1.16
The value of vRtrLdpNgSessParamAdvAdjAddrOnly specifies whether to only distribute the local addresses used by hello adjacencies with this LDP peer. When the value is SET to 'true', local addresses that are used by hello adjacencies with this LDP peer are only distributed to the peer session . When the value is SET to 'false', all known local addresses are distributed to the peer session
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessPeIDMacFlushInterop 1.3.6.1.4.1.6527.3.1.2.91.8.1.17
The value of vRtrLdpNgSessPeIDMacFlushInterop specifies whether LDP will react to and send the non-standard PE-ID TLV (type 0x405) in an address withdraw message to effect 'flush-all-from-me' behavior. It is used to provide interoperability with other vendors that use this TLV for the MAC flush mechanism. Only FEC type 128 is currently supported. Peer LDP sessions must be manually configured towards the PEs requiring support for this TLV. When the value of vRtrLdpNgSessPeIDMacFlushInterop is set to 'true', the receipt of an address withdraw message with empty MAC list including the non-standard TLV will trigger 'flush-all-from-me' behavior instead of the normal 'flush-all-but-mine'. The TLV will be included in any forwarding towards like-configured peers. When the value of vRtrLdpNgSessPeIDMacFlushInterop is set to 'false', the non-standard TLV will be ignored and will not be included in any address withdraw messages sent to the peer.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessParamIPv4PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.8.1.18
The value of vRtrLdpNgSessParamIPv4PfxFecCap specifies whether IPv4 prefix FECs can be exchanged over this session
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrLdpNgSessParamIPv6PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.8.1.19
The value of vRtrLdpNgSessParamIPv6PfxFecCap specifies whether IPv6 prefix FECs can be exchanged over this session
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrLdpNgSessParamP2MPFecCap 1.3.6.1.4.1.6527.3.1.2.91.8.1.20
The value of vRtrLdpNgSessParamP2MPFecCap specifies whether P2MP FECs can be exchanged over this session
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrLdpNgSessParamMaxFec 1.3.6.1.4.1.6527.3.1.2.91.8.1.21
The value of vRtrLdpNgSessParamMaxFec specifies the maximum number of FECs that will be accepted from this peer LSR. A value of zero specifies there is no limit to the number of FECs accepted from this peer LSR. The vRtrLdpNgSessMaxFecThresChanged notification is sent when the number of FECs receive from this peer LSR exceeds a percentage of this limit as specified by vRtrLdpPeerMaxFecThreshold. Furthermore, once the limit is exhausted, following actions are taken if vRtrLdpNgSessParamMaxFecLogOnly has value of 'false'. (1) If LSR Overload capability is supported, this LSR will follow the LSR Overload procedure. (2) If LSR Overload capability is not supported, any further Label Mapping Message is returned with Label Release Message with LDP status code 'No_Label_Resources'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..4294967295  

vRtrLdpNgSessParamMaxFecLogOnly 1.3.6.1.4.1.6527.3.1.2.91.8.1.22
The value of vRtrLdpNgSessParamMaxFecLogOnly specifies whether to only generate vRtrLdpNgSessMaxFecThresChanged notification or take further action when FECs received exceeds vRtrLdpNgSessParamMaxFec limit. When this value is set to 'false', trap will be generated and one of the following action is taken: (1) If LSR Overload capability is supported, this LSR will follow the LSR Overload procedure. (2) If LSR Overload capability is not supported, any further Label Mapping Message is returned with Label Release Message with LDP status code 'No_Label_Resources'. When this value is set to 'true', trap will be generated only.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessParamMaxFecThold 1.3.6.1.4.1.6527.3.1.2.91.8.1.23
The value of vRtrLdpNgSessParamMaxFecThold specifies a percentage of vRtrLdpNgSessParamMaxFec.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..100  

vRtrLdpNgSessParamAddrExpPolicy1 1.3.6.1.4.1.6527.3.1.2.91.8.1.24
The value of vRtrLdpNgSessParamAddrExpPolicy1 specifies the first export policy used to determine which local addresses should be distributed to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamAddrExpPolicy2 1.3.6.1.4.1.6527.3.1.2.91.8.1.25
The value of vRtrLdpNgSessParamAddrExpPolicy2 specifies the second export policy used to determine which local addresses should be distributed to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamAddrExpPolicy3 1.3.6.1.4.1.6527.3.1.2.91.8.1.26
The value of vRtrLdpNgSessParamAddrExpPolicy3 specifies the third export policy used to determine which local addresses should be distributed to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamAddrExpPolicy4 1.3.6.1.4.1.6527.3.1.2.91.8.1.27
The value of vRtrLdpNgSessParamAddrExpPolicy4 specifies the fourth export policy used to determine which local addresses should be distributed to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessParamAddrExpPolicy5 1.3.6.1.4.1.6527.3.1.2.91.8.1.28
The value of vRtrLdpNgSessParamAddrExpPolicy5 specifies the fifth export policy used to determine which local addresses should be distributed to this peer.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgSessionAddrTable 1.3.6.1.4.1.6527.3.1.2.91.9
The vRtrLdpNgSessionInAddrTable is a read-only table that represents all local addresses either sent to or received from an LDP peer for a single session between an LDP entity and an LDP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgSessionAddrEntry

vRtrLdpNgSessionAddrEntry 1.3.6.1.4.1.6527.3.1.2.91.9.1
Each row entry represents an instance of all local addresses sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgSessionAddrEntry  

vRtrLdpNgSessAddrLclLdpIdType 1.3.6.1.4.1.6527.3.1.2.91.9.1.1
The value of vRtrLdpNgSessAddrLclLdpIdType indicates the local LDP identifier type for the LDP session indicated by vRtrLdpNgSessionAddrLocalLdpId.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdType  

vRtrLdpNgSessionAddrLocalLdpId 1.3.6.1.4.1.6527.3.1.2.91.9.1.2
The value of vRtrLdpNgSessionAddrLocalLdpId indicates the local LDP identifier for this LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdentifier Size(6|18)  

vRtrLdpNgSessionAddrNumInAddrs 1.3.6.1.4.1.6527.3.1.2.91.9.1.3
The value of vRtrLdpNgSessionAddrNumInAddrs indicates the number of local addresses that have been received from the peer for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessionAddrNumOutAddrs 1.3.6.1.4.1.6527.3.1.2.91.9.1.4
The value of vRtrLdpNgSessionAddrNumOutAddrs indicates the number of local addresses that have been sent to the peer for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgSessionInAddrTable 1.3.6.1.4.1.6527.3.1.2.91.10
The vRtrLdpNgSessionInAddrTable is a read-only table that represents all local addresses received from an LDP peer for a single session between an LDP entity and an LDP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgSessionInAddrEntry

vRtrLdpNgSessionInAddrEntry 1.3.6.1.4.1.6527.3.1.2.91.10.1
Each row entry represents an instance of a local address received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgSessionInAddrEntry  

vRtrLdpNgSessionInAddrAddrType 1.3.6.1.4.1.6527.3.1.2.91.10.1.1
The value of vRtrLdpNgSessionInAddrAddrType indicates the address type of vRtrLdpNgSessionInAddrAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgSessionInAddrAddress 1.3.6.1.4.1.6527.3.1.2.91.10.1.2
The value of vRtrLdpNgSessionInAddrAddress indicates the IP address received from the peer for this LDP session.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrLdpNgSessInAddrLclLdpIdType 1.3.6.1.4.1.6527.3.1.2.91.10.1.3
The value of vRtrLdpNgSessInAddrLclLdpIdType indicates the local LDP identifier type for the LDP session indicated by vRtrLdpNgSessionInAddrLocalLdpId.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdType  

vRtrLdpNgSessionInAddrLocalLdpId 1.3.6.1.4.1.6527.3.1.2.91.10.1.4
The value of vRtrLdpNgSessionInAddrLocalLdpId indicates the local LDP identifier for this LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdentifier Size(6|18)  

vRtrLdpNgSessionOutAddrTable 1.3.6.1.4.1.6527.3.1.2.91.11
The vRtrLdpNgSessionOutAddrTable is a read-only table that represents all local addresses sent to an LDP peer for a single session between an LDP entity and an LDP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgSessionOutAddrEntry

vRtrLdpNgSessionOutAddrEntry 1.3.6.1.4.1.6527.3.1.2.91.11.1
Each row entry represents an instance of a local address sent to an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgSessionOutAddrEntry  

vRtrLdpNgSessionOutAddrAddrType 1.3.6.1.4.1.6527.3.1.2.91.11.1.1
The value of vRtrLdpNgSessionOutAddrAddrType indicates the address type of vRtrLdpNgSessionOutAddrAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgSessionOutAddrAddress 1.3.6.1.4.1.6527.3.1.2.91.11.1.2
The value of vRtrLdpNgSessionOutAddrAddress indicates the IP address sent to the peer for this LDP session.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrLdpNgSessOutAddrLclLdpIdType 1.3.6.1.4.1.6527.3.1.2.91.11.1.3
The value of vRtrLdpNgSessOutAddrLclLdpIdType indicates the local LDP identifier type for the LDP session, indicated by vRtrLdpNgSessionOutAddrLclLdpId.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdType  

vRtrLdpNgSessionOutAddrLclLdpId 1.3.6.1.4.1.6527.3.1.2.91.11.1.4
The value of vRtrLdpNgSessionOutAddrLclLdpId indicates the local LDP identifier for this LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLdpNgIdentifier Size(6|18)  

vRtrLdpNgAddrFecTable 1.3.6.1.4.1.6527.3.1.2.91.12
The vRtrLdpNgAddrFecTable is a read-only table that represents all address FECs either sent to or received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgAddrFecEntry

vRtrLdpNgAddrFecEntry 1.3.6.1.4.1.6527.3.1.2.91.12.1
Each row entry represents an instance of an address FEC sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgAddrFecEntry  

vRtrLdpNgAddrFecFecType 1.3.6.1.4.1.6527.3.1.2.91.12.1.1
The value of vRtrLdpNgAddrFecFecType specifies the FEC type.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxLdpFECType  

vRtrLdpNgAddrFecIpPrefixType 1.3.6.1.4.1.6527.3.1.2.91.12.1.2
The value of vRtrLdpNgAddrFecIpPrefixType indicates the address-type of vRtrLdpNgAddrFecIpPrefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgAddrFecIpPrefix 1.3.6.1.4.1.6527.3.1.2.91.12.1.3
The value of vRtrLdpNgAddrFecIpPrefix specifies the IP Address Prefix for this address FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrLdpNgAddrFecIpPrefixLen 1.3.6.1.4.1.6527.3.1.2.91.12.1.4
The value of vRtrLdpNgAddrFecIpPrefixLen indicates the prefix length of the subnet associated with vRtrLdpNgAddrFecIpPrefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength 0..128  

vRtrLdpNgAddrFecFlags 1.3.6.1.4.1.6527.3.1.2.91.12.1.5
The bit flags of vRtrLdpNgAddrFecFlags indicate the characteristics of the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECFlags  

vRtrLdpNgAddrFecNumInLabels 1.3.6.1.4.1.6527.3.1.2.91.12.1.6
The value of vRtrLdpNgAddrFecNumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecNumOutLabels 1.3.6.1.4.1.6527.3.1.2.91.12.1.7
The value of vRtrLdpNgAddrFecNumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecInLblTable 1.3.6.1.4.1.6527.3.1.2.91.13
The vRtrLdpNgAddrFecInLblTable is a read-only table that represents all address FECs received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpAddrFecInLblEntry

vRtrLdpNgAddrFecInLblEntry 1.3.6.1.4.1.6527.3.1.2.91.13.1
Each row entry represents an instance of an address FEC received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpAddrFecInLblEntry  

vRtrLdpNgAddrFecInLblId 1.3.6.1.4.1.6527.3.1.2.91.13.1.1
The value of vRtrLdpNgAddrFecInLblId indicates the label number of the ingress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecInLbl 1.3.6.1.4.1.6527.3.1.2.91.13.1.2
The value of vRtrLdpNgAddrFecInLbl indicates the ingress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecInLblStatus 1.3.6.1.4.1.6527.3.1.2.91.13.1.3
The value of vRtrLdpNgAddrFecInLblStatus indicates the status of the ingress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vRtrLdpNgAddrFecInLblIfIndex 1.3.6.1.4.1.6527.3.1.2.91.13.1.4
The value of vRtrLdpNgAddrFecInLblIfIndex indicates the interface index for ingress label.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrLdpNgAddrFecOutLblTable 1.3.6.1.4.1.6527.3.1.2.91.14
The vRtrLdpNgAddrFecOutLblTable is a read-only table that represents all address FECs sent to an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgAddrFecOutLblEntry

vRtrLdpNgAddrFecOutLblEntry 1.3.6.1.4.1.6527.3.1.2.91.14.1
Each row entry represents an instance of an address FEC received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgAddrFecOutLblEntry  

vRtrLdpNgAddrFecOutLblId 1.3.6.1.4.1.6527.3.1.2.91.14.1.1
The value of vRtrLdpNgAddrFecOutLblId indicates the label number of the egress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecOutLbl 1.3.6.1.4.1.6527.3.1.2.91.14.1.2
The value of vRtrLdpNgAddrFecOutLbl indicates the egress label exchanged
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecOutLblStatus 1.3.6.1.4.1.6527.3.1.2.91.14.1.3
The value of vRtrLdpNgAddrFecOutLblStatus indicates the status of the egress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vRtrLdpNgAddrFecOutLblIfIndex 1.3.6.1.4.1.6527.3.1.2.91.14.1.4
The value of vRtrLdpNgAddrFecOutLblIfIndex indicates the interface index for egress label.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrLdpNgAddrFecOutLblNHType 1.3.6.1.4.1.6527.3.1.2.91.14.1.5
The value of vRtrLdpNgAddrFecOutLblNHType indicates the address type of vRtrLdpNgAddrFecOutLblNHAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgAddrFecOutLblNHAddr 1.3.6.1.4.1.6527.3.1.2.91.14.1.6
The value of vRtrLdpNgAddrFecOutLblNHAddr indicates the IP address of the next hop for egress label.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrLdpNgAddrFecOutLblMetric 1.3.6.1.4.1.6527.3.1.2.91.14.1.7
The value of vRtrLdpNgAddrFecOutLblMetric indicates the relative cost of the tunnel represented by this address FEC egress label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecOutLblMtu 1.3.6.1.4.1.6527.3.1.2.91.14.1.8
The value of vRtrLdpNgAddrFecOutLblMtu indicates the maximum transfer unit for payloads represented by this address FEC egress label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecOutLblLspId 1.3.6.1.4.1.6527.3.1.2.91.14.1.9
The value of vRtrLdpNgAddrFecOutLblLspId indicates the LSP id associated with egress label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecMapTable 1.3.6.1.4.1.6527.3.1.2.91.15
The vRtrLdpNgAddrFecMapTable is a read-only table which maps to the vRtrLdpNgAddrFecTable. This table has the same indexes as the vRtrLdpNgAddrFecTable but the order in which these indexes are specified is different for the two tables.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgAddrFecMapEntry

vRtrLdpNgAddrFecMapEntry 1.3.6.1.4.1.6527.3.1.2.91.15.1
Each row entry represents an instance of an address FEC sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgAddrFecMapEntry  

vRtrLdpNgAddrFecMapFlags 1.3.6.1.4.1.6527.3.1.2.91.15.1.1
The bit flags of vRtrLdpNgAddrFecMapFlags indicate the characteristics of the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECFlags  

vRtrLdpNgAddrFecMapNumInLabels 1.3.6.1.4.1.6527.3.1.2.91.15.1.2
The value of vRtrLdpNgAddrFecMapNumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgAddrFecMapNumOutLabels 1.3.6.1.4.1.6527.3.1.2.91.15.1.3
The value of vRtrLdpNgAddrFecMapNumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecTable 1.3.6.1.4.1.6527.3.1.2.91.16
The vRtrLdpNgExtP2MPFecTable is a read-only table that represents operational information of P2MP FECs either sent to or received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgExtP2MPFecEntry

vRtrLdpNgExtP2MPFecEntry 1.3.6.1.4.1.6527.3.1.2.91.16.1
Each row entry represents an instance of operational information of a P2MP FEC sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgExtP2MPFecEntry  

vRtrLdpNgExtP2MPFecOpaqueType 1.3.6.1.4.1.6527.3.1.2.91.16.1.1
The value of vRtrLdpNgExtP2MPFecOpaqueType indicates the type of a Multi-Point Opaque Value Element.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrLdpNgExtP2MPFecOpaqueLength 1.3.6.1.4.1.6527.3.1.2.91.16.1.2
The value of vRtrLdpNgExtP2MPFecOpaqueLength indicates the length of a Multi-Point Opaque Value Element.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrLdpNgExtP2MPFecOpaqueValue 1.3.6.1.4.1.6527.3.1.2.91.16.1.3
The value of vRtrLdpNgExtP2MPFecOpaqueValue indicates the value of a Multi-Point Opaque Value Element.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..74)  

vRtrLdpNgExtP2MPFecRootAddrType 1.3.6.1.4.1.6527.3.1.2.91.16.1.4
The value of vRtrLdpNgExtP2MPFecRootAddrType indicates the type of ip address of the root for this P2MP FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgExtP2MPFecRootAddress 1.3.6.1.4.1.6527.3.1.2.91.16.1.5
The value of vRtrLdpNgExtP2MPFecRootAddress indicates the ip address of the root for this P2MP FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrLdpNgExtP2MPFecFlags 1.3.6.1.4.1.6527.3.1.2.91.16.1.6
The bit flags of vRtrLdpNgExtP2MPFecFlags indicates the characteristics of the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECFlags  

vRtrLdpNgExtP2MPFecNumInLabels 1.3.6.1.4.1.6527.3.1.2.91.16.1.7
The value of vRtrLdpNgExtP2MPFecNumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgExtP2MPFecNumOutLabels 1.3.6.1.4.1.6527.3.1.2.91.16.1.8
The value of vRtrLdpNgExtP2MPFecNumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgExtP2MPFecTunnelIfId 1.3.6.1.4.1.6527.3.1.2.91.16.1.9
The value of vRtrLdpNgExtP2MPFecTunnelIfId indicates the tunnel interface identifier for this P2MP FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecMetric 1.3.6.1.4.1.6527.3.1.2.91.16.1.10
The value of vRtrLdpNgExtP2MPFecMetric indicates the relative cost of the tunnel represented by this P2MP FEC
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecMTU 1.3.6.1.4.1.6527.3.1.2.91.16.1.11
The value of vRtrLdpNgExtP2MPFecMTU indicates the maximum transfer unit for payloads represented by this P2MP FEC
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecInLblTable 1.3.6.1.4.1.6527.3.1.2.91.17
The vRtrLdpNgExtP2MPFecInLblTable is a read-only table that represents all P2MP FECs received from an LDP peer known to the virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgExtP2MPFecInLblEntry

vRtrLdpNgExtP2MPFecInLblEntry 1.3.6.1.4.1.6527.3.1.2.91.17.1
Each row entry represents an instance of a P2MP FEC received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgExtP2MPFecInLblEntry  

vRtrLdpNgExtP2MPFecInLblId 1.3.6.1.4.1.6527.3.1.2.91.17.1.1
The value of vRtrLdpNgExtP2MPFecInLblId indicates the label number of the ingress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecInLbl 1.3.6.1.4.1.6527.3.1.2.91.17.1.2
The value of vRtrLdpNgExtP2MPFecInLbl indicates the ingress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecInLblStatus 1.3.6.1.4.1.6527.3.1.2.91.17.1.3
The value of vRtrLdpNgExtP2MPFecInLblStatus indicates the status of the ingress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vRtrLdpNgExtP2MPFecOutLblTable 1.3.6.1.4.1.6527.3.1.2.91.18
The vRtrLdpNgExtP2MPFecTable is a read-only table that represents all P2MP FECs sent to an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgExtP2MPFecOutLblEntry

vRtrLdpNgExtP2MPFecOutLblEntry 1.3.6.1.4.1.6527.3.1.2.91.18.1
Each row entry represents an instance of a P2MP FEC sent to a LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgExtP2MPFecOutLblEntry  

vRtrLdpNgExtP2MPFecOutLblId 1.3.6.1.4.1.6527.3.1.2.91.18.1.1
The value of vRtrLdpNgExtP2MPFecOutLblId indicates the label number of the egress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecOutLbl 1.3.6.1.4.1.6527.3.1.2.91.18.1.2
The value of vRtrLdpNgExtP2MPFecOutLbl indicates the egress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecOutLblStatus 1.3.6.1.4.1.6527.3.1.2.91.18.1.3
The value of vRtrLdpNgExtP2MPFecOutLblStatus indicates the status of the egress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vRtrLdpNgExtP2MPFecOutLblNHType 1.3.6.1.4.1.6527.3.1.2.91.18.1.4
The value of vRtrLdpNgExtP2MPFecOutLblNHType indicates the address type of vRtrLdpNgExtP2MPFecOutLblNHAdr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgExtP2MPFecOutLblNHAdr 1.3.6.1.4.1.6527.3.1.2.91.18.1.5
The value of vRtrLdpNgExtP2MPFecOutLblNHAdr indicates the IP address of the next hop for egress label.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrLdpNgExtP2MPFecOutLblIfIndex 1.3.6.1.4.1.6527.3.1.2.91.18.1.6
The value of vRtrLdpNgExtP2MPFecOutLblIfIndex indicates the interface index for egress label.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrLdpNgExtP2MPFecOutLblLspId 1.3.6.1.4.1.6527.3.1.2.91.18.1.7
The value of vRtrLdpNgExtP2MPFecOutLblLspId indicates the LSP id associated with egress label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecMapTable 1.3.6.1.4.1.6527.3.1.2.91.19
The vRtrLdpNgExtP2MPFecMapTable is a read-only table which maps to the vRtrLdpNgExtP2MPFecTable. This table has the same indexes as the vRtrLdpNgExtP2MPFecTable but the order in which these indexes are specified is different for the two tables.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgExtP2MPFecMapEntry

vRtrLdpNgExtP2MPFecMapEntry 1.3.6.1.4.1.6527.3.1.2.91.19.1
Each row entry represents an instance of a P2MP FEC sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgExtP2MPFecMapEntry  

vRtrLdpNgExtP2MPFecMapFlags 1.3.6.1.4.1.6527.3.1.2.91.19.1.1
The bit flags of vRtrLdpNgExtP2MPFecMapFlags indicates the characteristics of the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECFlags  

vRtrLdpNgExtP2MPFecMapNumInLbls 1.3.6.1.4.1.6527.3.1.2.91.19.1.2
The value of vRtrLdpNgExtP2MPFecMapNumInLbls indicates the number of labels that have been sent to the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgExtP2MPFecMapNumOutLbls 1.3.6.1.4.1.6527.3.1.2.91.19.1.3
The value of vRtrLdpNgExtP2MPFecMapNumOutLbls indicates the number of labels that have been received from the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgExtP2MPFecMapTunnelIfId 1.3.6.1.4.1.6527.3.1.2.91.19.1.4
The value of vRtrLdpNgExtP2MPFecMapTunnelIfId indicates the tunnel interface identifier for this P2MP FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecMapMetric 1.3.6.1.4.1.6527.3.1.2.91.19.1.5
The value of vRtrLdpNgExtP2MPFecMapMetric indicates the relative cost of the tunnel represented by this P2MP FEC
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgExtP2MPFecMapMTU 1.3.6.1.4.1.6527.3.1.2.91.19.1.6
The value of vRtrLdpNgExtP2MPFecMapMTU indicates the maximum transfer unit for payloads represented by this P2MP FEC
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgInetIfStatsTable 1.3.6.1.4.1.6527.3.1.2.91.20
The vRtrLdpNgInetIfStatsTable is a read-only table. The purpose of this table is to keep statistical information about the LDP Interfaces for given Inet address family on this LSR. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgInetIfTable, and the augmenting table, vRtrLdpNgInetIfStatsTable. This in effect extends the vRtrLdpNgInetIfTable with additional columns. Creation or deletion of a row in the vRtrLdpNgInetIfTable results in the same fate for the row in the vRtrLdpNgInetIfStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgInetIfStatsEntry

vRtrLdpNgInetIfStatsEntry 1.3.6.1.4.1.6527.3.1.2.91.20.1
A row in this table contains statistical information about an LDP Interface for given Inet address family. Some counters contained in a row are for fatal errors received during a former LDP Session associated with this entry. For example, an LDP Pdu received on a TCP connection during an LDP Session contains a fatal error. That error is counted here, because the session is terminated. If the error is NOT fatal (i.e. and the Session remains), then the error is counted in the vRtrLdpNgSessionStatsEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgInetIfStatsEntry  

vRtrLdpNgInetIfStatsExistingAdj 1.3.6.1.4.1.6527.3.1.2.91.20.1.1
The value of vRtrLdpNgInetIfStatsExistingAdj indicates a count of the total active adjacencies on this LDP interface for given Inet address family.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgInetIfStatsHelloRecv 1.3.6.1.4.1.6527.3.1.2.91.20.1.2
The value of vRtrLdpNgInetIfStatsHelloRecv indicates number of Hello messages received with this LDP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgInetIfStatsHelloSent 1.3.6.1.4.1.6527.3.1.2.91.20.1.3
The value of vRtrLdpNgInetIfStatsHelloSent indicates the number of Hello messages sent with this LDP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgInetIfStatsBadPduLen 1.3.6.1.4.1.6527.3.1.2.91.20.1.4
The value of vRtrLdpNgInetIfStatsBadPduLen indicates the number of bad PDU length errors detected with this LDP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgInetIfStatsBadMsgLen 1.3.6.1.4.1.6527.3.1.2.91.20.1.5
The value of vRtrLdpNgInetIfStatsBadMsgLen indicates the number of bad message length errors detected with this LDP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgInetIfStatsMalformedTlv 1.3.6.1.4.1.6527.3.1.2.91.20.1.6
The value of vRtrLdpNgInetIfStatsMalformedTlv indicates the number of malformed TLV value errors detected with this LDP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgInetIfStatsBadProtoVer 1.3.6.1.4.1.6527.3.1.2.91.20.1.7
The value of vRtrLdpNgInetIfStatsBadProtoVer indicates the number of bad protocol version errors detected with this LDP interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgSessionStatsTable 1.3.6.1.4.1.6527.3.1.2.91.21
The vRtrLdpNgSessionStatsTable is a read-only table. The purpose of this table is to keep statistical information about a single session between an LDP entity and an LDP Peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgSessionTable, and the augmenting table, vRtrLdpNgSessionStatsTable. This in effect extends the vRtrLdpNgSessionTable with additional columns. Creation or deletion of a row in the vRtrLdpNgSessionTable results in the same fate for the row in the vRtrLdpNgSessionStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgSessionStatsEntry

vRtrLdpNgSessionStatsEntry 1.3.6.1.4.1.6527.3.1.2.91.21.1
A row in this table represents statistical information about a single session between an LDP entity and an LDP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgSessionStatsEntry  

vRtrLdpNgSessStatsTargAdj 1.3.6.1.4.1.6527.3.1.2.91.21.1.1
The value of vRtrLdpNgSessStatsTargAdj indicates the number of targeted adjacencies for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgSessStatsLinkAdj 1.3.6.1.4.1.6527.3.1.2.91.21.1.2
The value of vRtrLdpNgSessStatsLinkAdj indicates the number of link adjacencies for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgSessStatsHelloIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.3
The value of vRtrLdpNgSessStatsHelloIn counts the number of Hello Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsHelloOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.4
The value of vRtrLdpNgSessStatsHelloOut counts the number of Hello Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsKeepaliveIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.5
The value of vRtrLdpNgSessStatsKeepaliveIn counts the number of Keepalive Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsKeepaliveOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.6
The value of vRtrLdpNgSessStatsKeepaliveOut counts the number of Keepalive Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsInitIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.7
The value of vRtrLdpNgSessStatsInitIn counts the number of Init Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsInitOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.8
The value of vRtrLdpNgSessStatsInitOut counts the number of Init Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblMappingIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.9
The value of vRtrLdpNgSessStatsLblMappingIn counts the number of Label Mapping Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblMappingOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.10
The value of vRtrLdpNgSessStatsLblMappingOut counts the number of Label Mapping Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblRequestIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.11
The value of vRtrLdpNgSessStatsLblRequestIn counts the number of Label Request Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblRequestOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.12
The value of vRtrLdpNgSessStatsLblRequestOut counts the number of Label Request Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblReleaseIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.13
The value of vRtrLdpNgSessStatsLblReleaseIn counts the number of Label Release Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblReleaseOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.14
The value of vRtrLdpNgSessStatsLblReleaseOut counts the number of Label Release Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblWithdrawIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.15
The value of vRtrLdpNgSessStatsLblWithdrawIn counts the number of Label Withdraw Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblWithdrawOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.16
The value of vRtrLdpNgSessStatsLblWithdrawOut counts the number of Label Withdraw Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblAbortIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.17
The value of vRtrLdpNgSessStatsLblAbortIn counts the number of Label Abort Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsLblAbortOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.18
The value of vRtrLdpNgSessStatsLblAbortOut counts the number of Label Abort Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsAddrIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.19
The value of vRtrLdpNgSessStatsAddrIn counts the number of Address Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsAddrOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.20
The value of vRtrLdpNgSessStatsAddrOut counts the number of Address Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsAddrWithdrIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.21
The value of vRtrLdpNgSessStatsAddrWithdrIn counts the number of Address Withdraw Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsAddrWithdrOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.22
The value of vRtrLdpNgSessStatsAddrWithdrOut counts the number of Address Withdraw Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsNotifIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.23
The value of vRtrLdpNgSessStatsNotifIn counts the number of Notification Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsNotifOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.24
The value of vRtrLdpNgSessStatsNotifOut counts the number of Notification Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv4PfxFecRcv 1.3.6.1.4.1.6527.3.1.2.91.21.1.25
The value of vRtrLdpNgSessStatsIPv4PfxFecRcv counts the number of IPv4 prefix FECs received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv6PfxFecRcv 1.3.6.1.4.1.6527.3.1.2.91.21.1.26
The value of vRtrLdpNgSessStatsIPv6PfxFecRcv counts the number of IPv6 prefix FECs received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv4PfxFecSnt 1.3.6.1.4.1.6527.3.1.2.91.21.1.27
The value of vRtrLdpNgSessStatsIPv4PfxFecSnt counts the number of IPv4 prefix FECs sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv6PfxFecSnt 1.3.6.1.4.1.6527.3.1.2.91.21.1.28
The value of vRtrLdpNgSessStatsIPv6PfxFecSnt counts the number of IPv6 prefix FECs sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv4P2MPFecRcv 1.3.6.1.4.1.6527.3.1.2.91.21.1.29
The value of vRtrLdpNgSessStatsIPv4P2MPFecRcv counts the number of IPv4 P2MP FECs received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv6P2MPFecRcv 1.3.6.1.4.1.6527.3.1.2.91.21.1.30
The value of vRtrLdpNgSessStatsIPv6P2MPFecRcv counts the number of IPv6 P2MP FECs received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv4P2MPFecSnt 1.3.6.1.4.1.6527.3.1.2.91.21.1.31
The value of vRtrLdpNgSessStatsIPv4P2MPFecSnt counts the number of IPv4 P2MP FECs sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv6P2MPFecSnt 1.3.6.1.4.1.6527.3.1.2.91.21.1.32
The value of vRtrLdpNgSessStatsIPv6P2MPFecSnt counts the number of IPv6 P2MP FECs sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsSvcFec128Recv 1.3.6.1.4.1.6527.3.1.2.91.21.1.33
The value of vRtrLdpNgSessStatsSvcFec128Recv counts the number of service FEC 128 received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsSvcFec128Sent 1.3.6.1.4.1.6527.3.1.2.91.21.1.34
The value of vRtrLdpNgSessStatsSvcFec128Sent counts the number of service FEC 128 sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsSvcFec129Recv 1.3.6.1.4.1.6527.3.1.2.91.21.1.35
The value of vRtrLdpNgSessStatsSvcFec129Recv counts the number of service FEC 129 received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsSvcFec129Sent 1.3.6.1.4.1.6527.3.1.2.91.21.1.36
The value of vRtrLdpNgSessStatsSvcFec129Sent counts the number of service FEC 129 sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv4AddrRecv 1.3.6.1.4.1.6527.3.1.2.91.21.1.37
The value of vRtrLdpNgSessStatsIPv4AddrRecv counts the number of IPv4 local addresses received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv6AddrRecv 1.3.6.1.4.1.6527.3.1.2.91.21.1.38
The value of vRtrLdpNgSessStatsIPv6AddrRecv counts the number of IPv6 local addresses received for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv4AddrSent 1.3.6.1.4.1.6527.3.1.2.91.21.1.39
The value of vRtrLdpNgSessStatsIPv4AddrSent counts the number of IPv4 local addresses sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsIPv6AddrSent 1.3.6.1.4.1.6527.3.1.2.91.21.1.40
The value of vRtrLdpNgSessStatsIPv6AddrSent counts the number of IPv6 local addresses sent for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsCapabilityIn 1.3.6.1.4.1.6527.3.1.2.91.21.1.41
The value of vRtrLdpNgSessStatsCapabilityIn counts the number of Capability Messages that have been received during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrLdpNgSessStatsCapabilityOut 1.3.6.1.4.1.6527.3.1.2.91.21.1.42
The value of vRtrLdpNgSessStatsCapabilityOut counts the number of Capability Messages that have been sent during this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgSvcFec128Table 1.3.6.1.4.1.6527.3.1.2.91.22
The vLdpNgSvcFec128Table is a read-only table that represents operational information of Service FEC 128 either sent to or received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgSvcFec128Entry

vLdpNgSvcFec128Entry 1.3.6.1.4.1.6527.3.1.2.91.22.1
Each row entry represents an instance of a service FEC 128 sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgSvcFec128Entry  

vLdpNgFec128FecType 1.3.6.1.4.1.6527.3.1.2.91.22.1.1
The value of vLdpNgFec128FecType specifies the FEC type associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxLdpFECType  

vLdpNgFec128VcType 1.3.6.1.4.1.6527.3.1.2.91.22.1.2
The value of vLdpNgFec128VcType specifies the VC type associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVcType  

vLdpNgFec128VcId 1.3.6.1.4.1.6527.3.1.2.91.22.1.3
The value of vLdpNgFec128VcId specifies the VC identifier associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVcId  

vLdpNgFec128ServType 1.3.6.1.4.1.6527.3.1.2.91.22.1.4
The value of vLdpNgFec128ServType indicates the Service type associated with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  ServType  

vLdpNgFec128ServId 1.3.6.1.4.1.6527.3.1.2.91.22.1.5
The value of vLdpNgFec128ServId indicates the Service identifier associated with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

vLdpNgFec128VpnId 1.3.6.1.4.1.6527.3.1.2.91.22.1.6
The value of vLdpNgFec128VpnId identifies the VPN associated with the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVpnId  

vLdpNgFec128Flags 1.3.6.1.4.1.6527.3.1.2.91.22.1.7
The bit flags of vLdpNgFec128Flags indicate the characteristics of the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECFlags  

vLdpNgFec128NumInLabels 1.3.6.1.4.1.6527.3.1.2.91.22.1.8
The value of vLdpNgFec128NumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128NumOutLabels 1.3.6.1.4.1.6527.3.1.2.91.22.1.9
The value of vLdpNgFec128NumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128SdpId 1.3.6.1.4.1.6527.3.1.2.91.22.1.10
The value of vLdpNgFec128SdpId identifies the SDP associated with this peer.
Status: current Access: read-only
OBJECT-TYPE    
  SdpId  

vLdpNgFec128MateEndptVcId 1.3.6.1.4.1.6527.3.1.2.91.22.1.11
The value of vLdpNgFec128MateEndptVcId indicates the VC identifier associated with this service FEC mate endpoint for vc-switching. vLdpNgFec128MateEndptVcId is set to zero (0) for non-switching FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVcIdOrNone  

vLdpNgFec128MateEndptSdpId 1.3.6.1.4.1.6527.3.1.2.91.22.1.12
The value of vLdpNgFec128MateEndptSdpId identifies the SDP associated with this service FEC mate endpoint for vc-switching.
Status: current Access: read-only
OBJECT-TYPE    
  SdpId  

vLdpNgSvcFec128InLblTable 1.3.6.1.4.1.6527.3.1.2.91.23
The vLdpNgSvcFec128InLblTable is a read-only table that represents all service FEC 128 received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgSvcFec128InLblEntry

vLdpNgSvcFec128InLblEntry 1.3.6.1.4.1.6527.3.1.2.91.23.1
Each row entry represents an instance of a service FEC received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgSvcFec128InLblEntry  

vLdpNgFec128InLabelId 1.3.6.1.4.1.6527.3.1.2.91.23.1.1
The value of vLdpNgFec128InLabelId identifies the ingress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128InLabel 1.3.6.1.4.1.6527.3.1.2.91.23.1.2
The value of vLdpNgFec128InLabel indicates the ingress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128InLabelStatus 1.3.6.1.4.1.6527.3.1.2.91.23.1.3
The value of vLdpNgFec128InLabelStatus indicates the status of the ingress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vLdpNgFec128InLabelSigStatus 1.3.6.1.4.1.6527.3.1.2.91.23.1.4
The value of vLdpNgFec128InLabelSigStatus indicates the signaling status for vLdpNgFec128InLabel.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelSigStatus  

vLdpNgFec128InLblWdwReason 1.3.6.1.4.1.6527.3.1.2.91.23.1.5
The value of vLdpNgFec128InLblWdwReason indicates the reason of withdrawal of ingress label value in vLdpNgFec128InLabel.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpInLblWdrawalReasonCode  

vLdpNgFec128InLblMaxCellConcat 1.3.6.1.4.1.6527.3.1.2.91.23.1.6
The value of vLdpNgFec128InLblMaxCellConcat indicates the local maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128InLblFLTxCap 1.3.6.1.4.1.6527.3.1.2.91.23.1.7
The value of vLdpNgFec128InLblFLTxCap indicates whether or not this LDP peer is capable of sending Flow Label in its pseudowire (PW) packet. The value of vLdpNgFec128InLblFLTxCap is 'true' when this LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128InLblFLRxCap 1.3.6.1.4.1.6527.3.1.2.91.23.1.8
The value of vLdpNgFec128InLblFLRxCap indicates whether or not this LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec128InLblFLRxCap is 'true' when this LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128InLblIPv4CeIpAdType 1.3.6.1.4.1.6527.3.1.2.91.23.1.9
The value of vLdpNgFec128InLblIPv4CeIpAdType indicates the local ipv4 CE Address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vLdpNgFec128InLblIPv4CeIpAddr 1.3.6.1.4.1.6527.3.1.2.91.23.1.10
The value of vLdpNgFec128InLblIPv4CeIpAddr indicates the local ipv4 CE Address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4)  

vLdpNgFec128InLblIPv4Cap 1.3.6.1.4.1.6527.3.1.2.91.23.1.11
The value of vLdpNgFec128InLblIPv4Cap indicates whether or not the local ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec128InLblIPv4Cap is 'true' when the local ipv4 stack capability is supported and the value is 'false' when the local ipv4 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128InLblIPv6Cap 1.3.6.1.4.1.6527.3.1.2.91.23.1.12
The value of vLdpNgFec128InLblIPv6Cap indicates whether or not the local ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec128InLblIPv6Cap is 'true' when the local ipv6 stack capability is supported and the value is 'false' when the local ipv6 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128InLblMTU 1.3.6.1.4.1.6527.3.1.2.91.23.1.13
The value of vLdpNgFec128InLblMTU indicates the largest service frame size (in octets) that can be handled by the local ESR.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128InLblVlanTag 1.3.6.1.4.1.6527.3.1.2.91.23.1.14
The value of vLdpNgFec128InLblVlanTag indicates the local tag on a VLAN VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128InLblVccvCV 1.3.6.1.4.1.6527.3.1.2.91.23.1.15
The value of vLdpNgFec128InLblVccvCV indicates the CV (Connectivity Verification) types supported by peer LSR if it supports VCCV (Circuit Connectivity Verification) on pseudowire. If VCCV is not supported, vLdpNgFec128InLblVccvCV will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS icmpPing(0), lspPing(1), bfdFaultDetect(2), bfdFaultDetectSignalling(3)  

vLdpNgFec128InLblVccvCC 1.3.6.1.4.1.6527.3.1.2.91.23.1.16
The value of vLdpNgFec128InLblVccvCC indicates the CC (Control Channel) types supported by peer LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec128InLblVccvCC will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS pwe3ControlWord(0), routerAlertLabel(1), mplsDemuxLabelTL1(2)  

vLdpNgFec128InLblPwStatus 1.3.6.1.4.1.6527.3.1.2.91.23.1.17
The value of vLdpNgFec128InLblPwStatus indicates whether the local LSR supports pseudowire status signaling.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgSvcFec128OutLblTable 1.3.6.1.4.1.6527.3.1.2.91.24
The vLdpNgSvcFec128OutLblTable is a read-only table that represents all service FEC 128 sent to an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgSvcFec128OutLblEntry

vLdpNgSvcFec128OutLblEntry 1.3.6.1.4.1.6527.3.1.2.91.24.1
Each row entry represents an instance of a service FEC 128 sent to an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgSvcFec128OutLblEntry  

vLdpNgFec128OutLabelId 1.3.6.1.4.1.6527.3.1.2.91.24.1.1
The value of vLdpNgFec128OutLabelId specifies the identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128OutLabel 1.3.6.1.4.1.6527.3.1.2.91.24.1.2
The value of vLdpNgFec128OutLabel indicates the egress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128OutLabelStatus 1.3.6.1.4.1.6527.3.1.2.91.24.1.3
The value of vLdpNgFec128OutLabelStatus indicates the status of the egress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vLdpNgFec128OutLabelSigStatus 1.3.6.1.4.1.6527.3.1.2.91.24.1.4
The value of vLdpNgFec128OutLabelSigStatus indicates the signaling status for vLdpNgFec128OutLabel.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelSigStatus  

vLdpNgFec128OutLblMaxCellConcat 1.3.6.1.4.1.6527.3.1.2.91.24.1.5
The value of vLdpNgFec128OutLblMaxCellConcat indicates the remote maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128OutLblFLTxCap 1.3.6.1.4.1.6527.3.1.2.91.24.1.6
The value of vLdpNgFec128OutLblFLTxCap indicates whether or not the remote LDP peer is capable of sending Flow Label in its pseudowire packet. The value of vLdpNgFec128OutLblFLTxCap is 'true' when the remote LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128OutLblFLRxCap 1.3.6.1.4.1.6527.3.1.2.91.24.1.7
The value of vLdpNgFec128OutLblFLRxCap indicates whether or not the remote LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec128OutLblFLRxCap is 'true' when the remote LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128OutLblIPv4CeAddrType 1.3.6.1.4.1.6527.3.1.2.91.24.1.8
The value of vLdpNgFec128OutLblIPv4CeAddrType indicates the remote ipv4 CE Address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vLdpNgFec128OutLblIPv4CeIpAddr 1.3.6.1.4.1.6527.3.1.2.91.24.1.9
The value of vLdpNgFec128OutLblIPv4CeIpAddr indicates the remote ipv4 CE Address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4)  

vLdpNgFec128OutLblIPv4Cap 1.3.6.1.4.1.6527.3.1.2.91.24.1.10
The value of vLdpNgFec128OutLblIPv4Cap indicates whether or not the remote ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec128OutLblIPv4Cap is 'true' when the remote ipv4 stack capability is supported and the value is 'false' when the remote ipv4 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128OutLblIPv6Cap 1.3.6.1.4.1.6527.3.1.2.91.24.1.11
The value of vLdpNgFec128OutLblIPv6Cap indicates whether or not the remote ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec128OutLblIPv6Cap is 'true' when the remote ipv6 stack capability is supported and the value is 'false' when the remote ipv6 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec128OutLblMTU 1.3.6.1.4.1.6527.3.1.2.91.24.1.12
The value of vLdpNgFec128OutLblMTU indicates the largest service frame size (in octets) that can be handled by the remote ESR.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128OutLblVlanTag 1.3.6.1.4.1.6527.3.1.2.91.24.1.13
The value of vLdpNgFec128OutLblVlanTag indicates the remote tag on a VLAN VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec128OutLblVccvCV 1.3.6.1.4.1.6527.3.1.2.91.24.1.14
The value of vLdpNgFec128OutLblVccvCV indicates the CV (Connectivity Verification) types supported by local LSR if it supports VCCV pseudowire. If VCCV is not supported, vLdpNgFec128OutLblVccvCV will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS icmpPing(0), lspPing(1), bfdFaultDetect(2), bfdFaultDetectSignalling(3)  

vLdpNgFec128OutLblVccvCC 1.3.6.1.4.1.6527.3.1.2.91.24.1.15
The value of vLdpNgFec128OutLblVccvCC indicates the CC (Control Channel) types supported by local LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec128OutLblVccvCC will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS pwe3ControlWord(0), routerAlertLabel(1), mplsDemuxLabelTL1(2)  

vLdpNgFec128OutLblPwStatus 1.3.6.1.4.1.6527.3.1.2.91.24.1.16
The value of vLdpNgFec128OutLblPwStatus indicates whether the remote LSR supports pseudowire status signaling.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgHelloAdjMapTable 1.3.6.1.4.1.6527.3.1.2.91.25
The vRtrLdpNgHelloAdjMapTable is a read-only table which maps to the vRtrLdpNgHelloAdjTable. This table has the same indexes as the vRtrLdpNgHelloAdjTable but the order in which these indexes are specified is different for the two tables.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgHelloAdjMapEntry

vRtrLdpNgHelloAdjMapEntry 1.3.6.1.4.1.6527.3.1.2.91.25.1
Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgHelloAdjMapEntry  

vRtrLdpNgHelloAdjMapLdpIdType 1.3.6.1.4.1.6527.3.1.2.91.25.1.1
vRtrLdpNgHelloAdjMapLdpIdType is an index for the row entry. It indicates the LDP identifier type of the peer, indicated by vRtrLdpNgHelloAdjMapLdpId.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMplsLdpNgIdType  

vRtrLdpNgHelloAdjMapLdpId 1.3.6.1.4.1.6527.3.1.2.91.25.1.2
vRtrLdpNgHelloAdjMapLdpId is an index for the row entry. It indicates the LDP identifier of the peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMplsLdpNgIdentifier Size(6|18)  

vRtrLdpNgHelloAdjMapIndex 1.3.6.1.4.1.6527.3.1.2.91.25.1.3
The value of vRtrLdpNgHelloAdjMapIndex indicates the Hello adjacency index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

vLdpNgSvcFec129Table 1.3.6.1.4.1.6527.3.1.2.91.26
The vLdpNgSvcFec129Table is a read-only table that represents all service FEC-129s either sent to or received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgSvcFec129Entry

vLdpNgSvcFec129Entry 1.3.6.1.4.1.6527.3.1.2.91.26.1
Each row entry represents an instance of a service FEC-129 sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgSvcFec129Entry  

vLdpNgFec129AgiType 1.3.6.1.4.1.6527.3.1.2.91.26.1.1
The value of vLdpNgFec129AgiType specifies the type of the Attachment Group Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..255  

vLdpNgFec129AgiLen 1.3.6.1.4.1.6527.3.1.2.91.26.1.2
The value of vLdpNgFec129AgiLen specifies the length of the Attachment Group Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

vLdpNgFec129AgiVal 1.3.6.1.4.1.6527.3.1.2.91.26.1.3
The value of vLdpNgFec129AgiVal specifies the value of the Attachment Group Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vLdpNgFec129SrcAiiType 1.3.6.1.4.1.6527.3.1.2.91.26.1.4
The value of vLdpNgFec129SrcAiiType specifies the type of the Source Attachment Individual Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..255  

vLdpNgFec129SrcAiiLen 1.3.6.1.4.1.6527.3.1.2.91.26.1.5
The value of vLdpNgFec129SrcAiiLen specifies the length of the Source Attachment Individual Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

vLdpNgFec129SrcAiiVal 1.3.6.1.4.1.6527.3.1.2.91.26.1.6
The value of vLdpNgFec129SrcAiiVal specifies the value of the Source Attachment Individual Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vLdpNgFec129TgtAiiType 1.3.6.1.4.1.6527.3.1.2.91.26.1.7
The value of vLdpNgFec129TgtAiiType specifies the type of the Target Attachment Individual Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..255  

vLdpNgFec129TgtAiiLen 1.3.6.1.4.1.6527.3.1.2.91.26.1.8
The value of vLdpNgFec129TgtAiiLen specifies the length of the Target Attachment Individual Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

vLdpNgFec129TgtAiiVal 1.3.6.1.4.1.6527.3.1.2.91.26.1.9
The value of vLdpNgFec129TgtAiiVal specifies the value of the Target Attachment Individual Identifier TLV associated with this service FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vLdpNgFec129ServType 1.3.6.1.4.1.6527.3.1.2.91.26.1.10
The value of vLdpNgFec129ServType indicates the Service type associated with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  ServType  

vLdpNgFec129ServId 1.3.6.1.4.1.6527.3.1.2.91.26.1.11
The value of vLdpNgFec129ServId indicates the Service identifier associated with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

vLdpNgFec129VpnId 1.3.6.1.4.1.6527.3.1.2.91.26.1.12
The value of vLdpNgFec129VpnId identifies the VPN associated with the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVpnId  

vLdpNgFec129Flags 1.3.6.1.4.1.6527.3.1.2.91.26.1.13
The value of vLdpNgFec129Flags indicates the characteristics of the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECFlags  

vLdpNgFec129NumInLabels 1.3.6.1.4.1.6527.3.1.2.91.26.1.14
The value of vLdpNgFec129NumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129NumOutLabels 1.3.6.1.4.1.6527.3.1.2.91.26.1.15
The value of vLdpNgFec129NumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129SdpId 1.3.6.1.4.1.6527.3.1.2.91.26.1.16
The value of vLdpNgFec129SdpId indicates the SDP associated with this peer.
Status: current Access: read-only
OBJECT-TYPE    
  SdpId  

vLdpNgFec129MateAgiType 1.3.6.1.4.1.6527.3.1.2.91.26.1.17
The value of vLdpNgFec129MateAgiType indicates the type of the Attachment Group Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vLdpNgFec129MateAgiLen 1.3.6.1.4.1.6527.3.1.2.91.26.1.18
The value of vLdpNgFec129MateAgiLen indicates the length of the Attachment Group Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vLdpNgFec129MateAgiVal 1.3.6.1.4.1.6527.3.1.2.91.26.1.19
The value of vLdpNgFec129MateAgiVal indicates the value of the Attachment Group Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vLdpNgFec129MateSrcAiiType 1.3.6.1.4.1.6527.3.1.2.91.26.1.20
The value of vLdpNgFec129MateSrcAiiType indicates the type of the Source Attachment Individual Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vLdpNgFec129MateSrcAiiLen 1.3.6.1.4.1.6527.3.1.2.91.26.1.21
The value of vLdpNgFec129MateSrcAiiLen indicates the length of the Source Attachment Individual Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vLdpNgFec129MateSrcAiiVal 1.3.6.1.4.1.6527.3.1.2.91.26.1.22
The value of vLdpNgFec129MateSrcAiiVal indicates the value of the Source Attachment Individual Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vLdpNgFec129MateTgtAiiType 1.3.6.1.4.1.6527.3.1.2.91.26.1.23
The value of vLdpNgFec129MateTgtAiiType indicates the type of the Target Attachment Individual Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vLdpNgFec129MateTgtAiiLen 1.3.6.1.4.1.6527.3.1.2.91.26.1.24
The value of vLdpNgFec129MateTgtAiiLen indicates the length of the Target Attachment Individual Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vLdpNgFec129MateTgtAiiVal 1.3.6.1.4.1.6527.3.1.2.91.26.1.25
The value of vLdpNgFec129MateTgtAiiVal indicates the value of the Target Attachment Individual Identifier TLV switched with this service FEC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vLdpNgFec129MateSdpId 1.3.6.1.4.1.6527.3.1.2.91.26.1.26
The value of vLdpNgFec129MateSdpId indicates the SDP switched with this peer.
Status: current Access: read-only
OBJECT-TYPE    
  SdpId  

vLdpNgSvcFec129InLblTable 1.3.6.1.4.1.6527.3.1.2.91.27
The vLdpNgSvcFec129InLblTable is a read-only table that represents all service FEC-129s received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgSvcFec129InLblEntry

vLdpNgSvcFec129InLblEntry 1.3.6.1.4.1.6527.3.1.2.91.27.1
Each row entry represents an instance of a service FEC-129 received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgSvcFec129InLblEntry  

vLdpNgFec129InLblId 1.3.6.1.4.1.6527.3.1.2.91.27.1.1
The value of vLdpNgFec129InLblId indicates the label number of the ingress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129InLabel 1.3.6.1.4.1.6527.3.1.2.91.27.1.2
The value of vLdpNgFec129InLabel indicates the ingress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129InLabelStatus 1.3.6.1.4.1.6527.3.1.2.91.27.1.3
The value of vLdpNgFec129InLabelStatus indicates the status of the ingress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vLdpNgFec129InLblMTU 1.3.6.1.4.1.6527.3.1.2.91.27.1.4
The value of vLdpNgFec129InLblMTU indicates the largest service frame size (in octets) that can be handled by the local ESR.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129InLblVlanTag 1.3.6.1.4.1.6527.3.1.2.91.27.1.5
The value of vLdpNgFec129InLblVlanTag indicates the local tag on a VLAN VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129InLblMaxCellConcat 1.3.6.1.4.1.6527.3.1.2.91.27.1.6
The value of vLdpNgFec129InLblMaxCellConcat indicates the local maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129InLblSigStatus 1.3.6.1.4.1.6527.3.1.2.91.27.1.7
The value of vLdpNgFec129InLblSigStatus indicates the signaling status for vLdpNgFec129InLabel.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelSigStatus  

vLdpNgFec129InLblIPv4Cap 1.3.6.1.4.1.6527.3.1.2.91.27.1.8
The value of vLdpNgFec129InLblIPv4Cap indicates whether or not the local ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec129InLblIPv4Cap is 'true' when the local ipv4 stack capability is supported and the value is 'false' when the local ipv4 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129InLblIPv6Cap 1.3.6.1.4.1.6527.3.1.2.91.27.1.9
The value of vLdpNgFec129InLblIPv6Cap indicates whether or not the local ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec129InLblIPv6Cap is 'true' when the local ipv6 stack capability is supported and the value is 'false' when the local ipv6 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129InLblIPv4CeAddrType 1.3.6.1.4.1.6527.3.1.2.91.27.1.10
The value of vLdpNgFec129InLblIPv4CeAddrType indicates the local CE Address type of the object indicated by vLdpNgFec129InLblIPv4CeIpAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vLdpNgFec129InLblIPv4CeIpAddr 1.3.6.1.4.1.6527.3.1.2.91.27.1.11
The value of vLdpNgFec129InLblIPv4CeIpAddr indicates the local CE Address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4)  

vLdpNgFec129InLblWdwReason 1.3.6.1.4.1.6527.3.1.2.91.27.1.12
The value of vLdpNgFec129InLblWdwReason indicates the reason of withdrawal of ingress label value in vLdpNgFec129InLabel.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpInLblWdrawalReasonCode  

vLdpNgFec129InLblFLTxCap 1.3.6.1.4.1.6527.3.1.2.91.27.1.13
The value of vLdpNgFec129InLblFLTxCap indicates whether or not this LDP peer is capable of sending Flow Label in its pseudowire (PW) packet. The value of vLdpNgFec129InLblFLTxCap is 'true' when this LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129InLblFLRxCap 1.3.6.1.4.1.6527.3.1.2.91.27.1.14
The value of vLdpNgFec129InLblFLRxCap indicates whether or not this LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec129InLblFLRxCap is 'true' when this LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129InLblVccvCV 1.3.6.1.4.1.6527.3.1.2.91.27.1.15
The value of vLdpNgFec129InLblVccvCV indicates the CV (Connectivity Verification) types supported by local LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129InLblVccvCV will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS icmpPing(0), lspPing(1), bfdFaultDetect(2), bfdFaultDetectSignalling(3)  

vLdpNgFec129InLblVccvCC 1.3.6.1.4.1.6527.3.1.2.91.27.1.16
The value of vLdpNgFec129InLblVccvCC indicates the CC (Control Channel) types supported by local LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129InLblVccvCC will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS pwe3ControlWord(0), routerAlertLabel(1), mplsDemuxLabelTL1(2)  

vLdpNgFec129InLblPwStatus 1.3.6.1.4.1.6527.3.1.2.91.27.1.17
The value of vLdpNgFec129InLblPwStatus indicates whether the local LSR supports pseudowire status signaling.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgSvcFec129OutLblTable 1.3.6.1.4.1.6527.3.1.2.91.28
The vLdpNgSvcFec129OutLblTable is a read-only table that represents all service FEC-129s sent to an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgSvcFec129OutLblEntry

vLdpNgSvcFec129OutLblEntry 1.3.6.1.4.1.6527.3.1.2.91.28.1
Each row entry represents an instance of a service FEC-129 sent to an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgSvcFec129OutLblEntry  

vLdpNgFec129OutLblId 1.3.6.1.4.1.6527.3.1.2.91.28.1.1
The value of vLdpNgFec129OutLblId indicates the label number of the egress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129OutLabel 1.3.6.1.4.1.6527.3.1.2.91.28.1.2
The value of vLdpNgFec129OutLabel indicates the egress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129OutLabelStatus 1.3.6.1.4.1.6527.3.1.2.91.28.1.3
The value of vLdpNgFec129OutLabelStatus indicates the status of the egress label
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vLdpNgFec129OutLblMTU 1.3.6.1.4.1.6527.3.1.2.91.28.1.4
The value of vLdpNgFec129OutLblMTU indicates the largest service frame size (in octets) that can be handled by the remote ESR.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129OutLblVlanTag 1.3.6.1.4.1.6527.3.1.2.91.28.1.5
The value of vLdpNgFec129OutLblVlanTag indicates the remote tag on a VLAN VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129OutLblMaxCellConcat 1.3.6.1.4.1.6527.3.1.2.91.28.1.6
The value of vLdpNgFec129OutLblMaxCellConcat indicates the remote maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgFec129OutLblSigStatus 1.3.6.1.4.1.6527.3.1.2.91.28.1.7
The value of vLdpNgFec129OutLblSigStatus indicates the signaling status for vLdpNgFec129OutLabel.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelSigStatus  

vLdpNgFec129OutLblIPv4Cap 1.3.6.1.4.1.6527.3.1.2.91.28.1.8
The value of vLdpNgFec129OutLblIPv4Cap indicates whether or not the remote ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec129OutLblIPv4Cap is 'true' when the remote ipv4 stack capability is supported and the value is 'false' when the remote ipv4 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129OutLblIPv6Cap 1.3.6.1.4.1.6527.3.1.2.91.28.1.9
The value of vLdpNgFec129OutLblIPv6Cap indicates whether or not the remote ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec129OutLblIPv6Cap is 'true' when the remote ipv6 stack capability is supported and the value is 'false' when the remote ipv6 stack capability is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129OutLblIPv4CeAddrType 1.3.6.1.4.1.6527.3.1.2.91.28.1.10
The value of vLdpNgFec129OutLblIPv4CeAddrType indicates the remote CE Address type of the object indicated by vLdpNgFec129OutLblIPv4CeIpAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vLdpNgFec129OutLblIPv4CeIpAddr 1.3.6.1.4.1.6527.3.1.2.91.28.1.11
The value of vLdpNgFec129OutLblIPv4CeIpAddr indicates the remote CE Address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4)  

vLdpNgFec129OutLblFLTxCap 1.3.6.1.4.1.6527.3.1.2.91.28.1.12
The value of vLdpNgFec129OutLblFLTxCap indicates whether or not the remote LDP peer is capable of sending Flow Label in its pseudowire packet. The value of vLdpNgFec129OutLblFLTxCap is 'true' when the remote LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129OutLblFLRxCap 1.3.6.1.4.1.6527.3.1.2.91.28.1.13
The value of vLdpNgFec129OutLblFLRxCap indicates whether or not the remote LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec129OutLblFLRxCap is 'true' when the remote LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgFec129OutLblVccvCV 1.3.6.1.4.1.6527.3.1.2.91.28.1.14
The value of vLdpNgFec129OutLblVccvCV indicates the CV (Connectivity Verification) types supported by remote LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129OutLblVccvCV will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS icmpPing(0), lspPing(1), bfdFaultDetect(2), bfdFaultDetectSignalling(3)  

vLdpNgFec129OutLblVccvCC 1.3.6.1.4.1.6527.3.1.2.91.28.1.15
The value of vLdpNgFec129OutLblVccvCC indicates the CC (Control Channel) types supported by remote LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129OutLblVccvCC will be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  BITS pwe3ControlWord(0), routerAlertLabel(1), mplsDemuxLabelTL1(2)  

vLdpNgFec129OutLblPwStatus 1.3.6.1.4.1.6527.3.1.2.91.28.1.16
The value of vLdpNgFec129OutLblPwStatus indicates whether the remote LSR supports pseudowire status signaling.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec128InLblTable 1.3.6.1.4.1.6527.3.1.2.91.29
The vLdpNgCepTdmFec128InLblTable is a read-only table that represents all CEP/TDM FECs received from an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgCepTdmFec128InLblEntry

vLdpNgCepTdmFec128InLblEntry 1.3.6.1.4.1.6527.3.1.2.91.29.1
Each row entry represents an instance of a service FEC 128 sent to or received from an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec128InLblTable, and the augmenting table, vLdpNgCepTdmFec128InLblTable. This in effect extends the vLdpNgSvcFec128InLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec128InLblTable results in the same fate for the row in the vLdpNgCepTdmFec128InLblEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgCepTdmFec128InLblEntry  

vLdpNgCepTdmFec128InLblPayldSize 1.3.6.1.4.1.6527.3.1.2.91.29.1.1
The value of vLdpNgCepTdmFec128InLblPayldSize indicates the local payload size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128InLblBitrate 1.3.6.1.4.1.6527.3.1.2.91.29.1.2
The value of vLdpNgCepTdmFec128InLblBitrate indicates the local bitrate.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128InLblRtpHeader 1.3.6.1.4.1.6527.3.1.2.91.29.1.3
The value of vLdpNgCepTdmFec128InLblRtpHeader indicates the local RTP header usage bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec128InLblDiffTStmp 1.3.6.1.4.1.6527.3.1.2.91.29.1.4
The value of vLdpNgCepTdmFec128InLblDiffTStmp indicates the local differential (or dynamic) timestamping mode bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec128InLblSigPkts 1.3.6.1.4.1.6527.3.1.2.91.29.1.5
The value of vLdpNgCepTdmFec128InLblSigPkts indicates the local CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsSigPkts  

vLdpNgCepTdmFec128InLblCasTrunk 1.3.6.1.4.1.6527.3.1.2.91.29.1.6
The value of vLdpNgCepTdmFec128InLblCasTrunk indicates the local CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsCasTrunkFraming  

vLdpNgCepTdmFec128InLblTStmpFreq 1.3.6.1.4.1.6527.3.1.2.91.29.1.7
The value of vLdpNgCepTdmFec128InLblTStmpFreq indicates the local CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128InLblPayldType 1.3.6.1.4.1.6527.3.1.2.91.29.1.8
The value of vLdpNgCepTdmFec128InLblPayldType indicates the local payload type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128InLblSsrcId 1.3.6.1.4.1.6527.3.1.2.91.29.1.9
The value of vLdpNgCepTdmFec128InLblSsrcId indicates the local value of SSRC ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128OutLblTable 1.3.6.1.4.1.6527.3.1.2.91.30
The vLdpNgCepTdmFec128OutLblTable is a read-only table that represents all CEP/TDM FECs sent to an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgCepTdmFec128OutLblEntry

vLdpNgCepTdmFec128OutLblEntry 1.3.6.1.4.1.6527.3.1.2.91.30.1
Each row entry represents an instance of a service FEC sent to or received from an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec128OutLblTable, and the augmenting table, vLdpNgCepTdmFec128OutLblTable. This in effect extends the vLdpNgSvcFec128OutLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec128OutLblTable results in the same fate for the row in the vLdpNgCepTdmFec128OutLblEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgCepTdmFec128OutLblEntry  

vLdpNgCepTdmFec128OutLblPyldSze 1.3.6.1.4.1.6527.3.1.2.91.30.1.1
The value of vLdpNgCepTdmFec128OutLblPyldSze indicates the remote payload size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128OutLblBitrate 1.3.6.1.4.1.6527.3.1.2.91.30.1.2
The value of vLdpNgCepTdmFec128OutLblBitrate indicates the remote bitrate.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128OutLblRtpHdr 1.3.6.1.4.1.6527.3.1.2.91.30.1.3
The value of vLdpNgCepTdmFec128OutLblRtpHdr indicates the remote RTP header usage bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec128OutLblDfTstmp 1.3.6.1.4.1.6527.3.1.2.91.30.1.4
The value of vLdpNgCepTdmFec128OutLblDfTstmp indicates the remote differential (or dynamic) timestamping mode bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec128OutLblSigPkts 1.3.6.1.4.1.6527.3.1.2.91.30.1.5
The value of vLdpNgCepTdmFec128OutLblSigPkts indicates the remote CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsSigPkts  

vLdpNgCepTdmFec128OutLblCasTrnk 1.3.6.1.4.1.6527.3.1.2.91.30.1.6
The value of vLdpNgCepTdmFec128OutLblCasTrnk indicates the remote CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsCasTrunkFraming  

vLdpNgCepTdmFec128OutLblTstmpFq 1.3.6.1.4.1.6527.3.1.2.91.30.1.7
The value of vLdpNgCepTdmFec128OutLblTstmpFq indicates the remote CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128OutLblPyldTyp 1.3.6.1.4.1.6527.3.1.2.91.30.1.8
The value of vLdpNgCepTdmFec128OutLblPyldTyp indicates the remote payload type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec128OutLblSsrcId 1.3.6.1.4.1.6527.3.1.2.91.30.1.9
The value of vLdpNgCepTdmFec128OutLblSsrcId indicates the remote value of SSRC ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129InLblTable 1.3.6.1.4.1.6527.3.1.2.91.31
The vLdpNgCepTdmFec129InLblTable is a read-only table that represents all CEP/TDM FECs received from an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgCepTdmFec129InLblEntry

vLdpNgCepTdmFec129InLblEntry 1.3.6.1.4.1.6527.3.1.2.91.31.1
Each row entry represents an instance of a service FEC received from an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec129InLblTable, and the augmenting table, vLdpNgCepTdmFec129InLblTable. This in effect extends the vLdpNgSvcFec129InLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec129InLblTable results in the same fate for the row in the VLdpNgCepTdmFec129InLblEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgCepTdmFec129InLblEntry  

vLdpNgCepTdmFec129InLblPayldSize 1.3.6.1.4.1.6527.3.1.2.91.31.1.1
The value of vLdpNgCepTdmFec129InLblPayldSize indicates the local payload size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129InLblBitrate 1.3.6.1.4.1.6527.3.1.2.91.31.1.2
The value of vLdpNgCepTdmFec129InLblBitrate indicates the local bitrate.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129InLblRtpHeader 1.3.6.1.4.1.6527.3.1.2.91.31.1.3
The value of vLdpNgCepTdmFec129InLblRtpHeader indicates the local RTP header usage bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec129InLblDiffTStmp 1.3.6.1.4.1.6527.3.1.2.91.31.1.4
The value of vLdpNgCepTdmFec129InLblDiffTStmp indicates the local differential (or dynamic) timestamping mode bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec129InLblSigPkts 1.3.6.1.4.1.6527.3.1.2.91.31.1.5
The value of vLdpNgCepTdmFec129InLblSigPkts indicates the local CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsSigPkts  

vLdpNgCepTdmFec129InLblCasTrunk 1.3.6.1.4.1.6527.3.1.2.91.31.1.6
The value of vLdpNgCepTdmFec129InLblCasTrunk indicates the local CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsCasTrunkFraming  

vLdpNgCepTdmFec129InLblTStmpFreq 1.3.6.1.4.1.6527.3.1.2.91.31.1.7
The value of vLdpNgCepTdmFec129InLblTStmpFreq indicates the local CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129InLblPayldType 1.3.6.1.4.1.6527.3.1.2.91.31.1.8
The value of vLdpNgCepTdmFec129InLblPayldType indicates the local payload type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129InLblSsrcId 1.3.6.1.4.1.6527.3.1.2.91.31.1.9
The value of vLdpNgCepTdmFec129InLblSsrcId indicates the local value of SSRC ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129OutLblTable 1.3.6.1.4.1.6527.3.1.2.91.32
THe vLdpNgCepTdmFec129OutLblTable is a read-only table that represents all CEP/TDM FECs sent to an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgCepTdmFec129OutLblEntry

vLdpNgCepTdmFec129OutLblEntry 1.3.6.1.4.1.6527.3.1.2.91.32.1
Each row entry represents an instance of a service FEC sent to an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec129OutLblTable, and the augmenting table, vLdpNgCepTdmFec129OutLblTable. This in effect extends the vLdpNgSvcFec129OutLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec129OutLblTable results in the same fate for the row in the VLdpNgCepTdmFec129OutLblEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgCepTdmFec129OutLblEntry  

vLdpNgCepTdmFec129OutLblPyldSize 1.3.6.1.4.1.6527.3.1.2.91.32.1.1
The value of vLdpNgCepTdmFec129OutLblPyldSize indicates the remote payload size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129OutLblBitrate 1.3.6.1.4.1.6527.3.1.2.91.32.1.2
The value of vLdpNgCepTdmFec129OutLblBitrate indicates the remote bitrate.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129OutLblRtpHdr 1.3.6.1.4.1.6527.3.1.2.91.32.1.3
The value of vLdpNgCepTdmFec129OutLblRtpHdr indicates the remote RTP header usage bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec129OutLblDifTStmp 1.3.6.1.4.1.6527.3.1.2.91.32.1.4
The value of vLdpNgCepTdmFec129OutLblDifTStmp indicates the remote differential (or dynamic) timestamping mode bit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vLdpNgCepTdmFec129OutLblSigPkts 1.3.6.1.4.1.6527.3.1.2.91.32.1.5
The value of vLdpNgCepTdmFec129OutLblSigPkts indicates the remote CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsSigPkts  

vLdpNgCepTdmFec129OutLblCasTrnk 1.3.6.1.4.1.6527.3.1.2.91.32.1.6
The value of vLdpNgCepTdmFec129OutLblCasTrnk indicates the remote CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsCasTrunkFraming  

vLdpNgCepTdmFec129OutLblTStmpFrq 1.3.6.1.4.1.6527.3.1.2.91.32.1.7
The value of vLdpNgCepTdmFec129OutLblTStmpFrq indicates the remote CE application signalling packets mode.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129OutLblPyldType 1.3.6.1.4.1.6527.3.1.2.91.32.1.8
The value of vLdpNgCepTdmFec129OutLblPyldType indicates the remote payload type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgCepTdmFec129OutLblSsrcId 1.3.6.1.4.1.6527.3.1.2.91.32.1.9
The value of vLdpNgCepTdmFec129OutLblSsrcId indicates the remote value of SSRC ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgStaticFecTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.33
The value of vRtrLdpNgStaticFecTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgStaticFecTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgStaticFecTable 1.3.6.1.4.1.6527.3.1.2.91.34
The vRtrLdpNgStaticFecTable has an entry for each static prefix FEC configured on the virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgStaticFecEntry

vRtrLdpNgStaticFecEntry 1.3.6.1.4.1.6527.3.1.2.91.34.1
Each row entry represents a static prefix FEC configured on the virtual router. Entries can be created and deleted via SNMP SET operations to vRtrLdpNgStaticFecRowStatus. An entry is created by setting vRtrLdpNgStaticFecRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgStaticFecRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgStaticFecEntry  

vRtrLdpNgStaticFecIpPrefixType 1.3.6.1.4.1.6527.3.1.2.91.34.1.1
The value of vRtrLdpNgStaticFecIpPrefixType specifies the IP Address Prefix type for the static FEC indicated by vRtrLdpNgStaticFecIpPrefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgStaticFecIpPrefix 1.3.6.1.4.1.6527.3.1.2.91.34.1.2
The value of vRtrLdpNgStaticFecIpPrefix specifies the IP Address Prefix for this static FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgStaticFecIpPrefixLen 1.3.6.1.4.1.6527.3.1.2.91.34.1.3
The value of vRtrLdpNgStaticFecIpPrefixLen specifies the IP Address Mask length for this static FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength 0..128  

vRtrLdpNgStaticFecRowStatus 1.3.6.1.4.1.6527.3.1.2.91.34.1.4
vRtrLdpNgStaticFecRowStatus is used to create, delete or control entries in the vRtrLdpNgStaticFecTable. An entry is created by setting vRtrLdpNgStaticFecRowStatus 'createAndGo'. An entry is deleted by setting vRtrLdpNgStaticFecRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgStaticFecNumInLabel 1.3.6.1.4.1.6527.3.1.2.91.34.1.5
The value of vRtrLdpNgStaticFecNumInLabel indicates the number of in labels that are associated with the static prefix FEC represented by this row entry. This is also the number of row entries configured in the vRtrLdpNgStaticFecInLabelTable for this static prefix FEC. If the static FEC has no in labels associated with it, this value will be 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgStaticFecNumOutLabel 1.3.6.1.4.1.6527.3.1.2.91.34.1.6
The value of vRtrLdpNgStaticFecNumOutLabel indicates the number of out labels that are associated with the static prefix FEC represented by this row entry. This is also the number of row entries configured in the vRtrLdpNgStaticFecOutLabelTable for this static prefix FEC. If the static FEC has no out labels associated with it, this value will be 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgStaticFecInLabelTable 1.3.6.1.4.1.6527.3.1.2.91.35
vRtrLdpNgStaticFecInLabelTable has an entry for each static prefix FEC in label configured on the virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgStaticFecInLabelEntry

vRtrLdpNgStaticFecInLabelEntry 1.3.6.1.4.1.6527.3.1.2.91.35.1
Each row entry represents a static prefix FEC in label configured on the virtual router. The static prefix FEC corresponding to a in label entry must exist as a row entry in the vRtrLdpNgStaticFecTable. Entries can be created and deleted via SNMP SET operations to vRtrLdpNgSFecInLabelRowStatus. An entry is created by setting vRtrLdpNgSFecInLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecInLabelRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgStaticFecInLabelEntry  

vRtrLdpNgSFecInLabel 1.3.6.1.4.1.6527.3.1.2.91.35.1.1
The value of vRtrLdpNgSFecInLabel indicates the label that is advertised to the upstream peer. The range of vRtrLdpNgSFecInLabel is dynamic and depends on the value of vRtrMplsLabelStaticLabelRange. The normal range of vRtrLdpNgSFecInLabel starts at 32 and ends at the value of vRtrMplsLabelStaticLabelRange + 32. If this variable is set to the value of 4294967295, the ingress label will be dynamically assigned by the label manager.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 32..262112 | 4294967295  

vRtrLdpNgSFecInLabelRowStatus 1.3.6.1.4.1.6527.3.1.2.91.35.1.2
vRtrLdpNgSFecInLabelRowStatus is used to create, delete or control entries in the vRtrLdpNgStaticFecInLabelTable. An entry is created by setting vRtrLdpNgSFecInLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecInLabelRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgSFecOperInLabel 1.3.6.1.4.1.6527.3.1.2.91.35.1.3
The value of vRtrLdpNgSFecOperInLabel indicates the actual or operational value of the label that was advertised to the upstream peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgStaticFecOutLabelTable 1.3.6.1.4.1.6527.3.1.2.91.36
vRtrLdpNgStaticFecOutLabelTable has an entry for each static prefix FEC out label configured on the virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgStaticFecOutLabelEntry

vRtrLdpNgStaticFecOutLabelEntry 1.3.6.1.4.1.6527.3.1.2.91.36.1
Each row entry represents a static prefix FEC out label configured on the virtual router. The static prefix FEC corresponding to a in label entry must exist as a row entry in the vRtrLdpNgStaticFecTable. For vRtrLdpNgSFecOutLabelType 'pop' or 'swap' corresponding static FEC Prefix row entry must exist in vRtrLdpNgStaticFecInLabelTable Entries can be created and deleted via SNMP SET operations to vRtrLdpNgSFecOutLabelRowStatus. An entry is created by setting vRtrLdpNgSFecOutLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecOutLabelRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgStaticFecOutLabelEntry  

vRtrLdpNgSFecOutLabelType 1.3.6.1.4.1.6527.3.1.2.91.36.1.1
The value of vRtrLdpNgSFecOutLabelType indicates operation type of this FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER unknown(0), pop(1), push(2), swap(3)  

vRtrLdpNgSFecOutLabelIfName 1.3.6.1.4.1.6527.3.1.2.91.36.1.2
If vRtrLdpNgSFecOutLabelType is set to 'swap' or 'push', the value of vRtrLdpNgSFecOutLabelIfName indicates the interface name to use for this static fec prefix. If vRtrLdpNgSFecOutLabelType is set to 'pop', the value of vRtrLdpNgSFecOutLabelIfName will be a null string.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

vRtrLdpNgSFecOutLabelIpAddrType 1.3.6.1.4.1.6527.3.1.2.91.36.1.3
The value of vRtrLdpNgSFecOutLabelIpAddrType indicates the IP address type for vRtrLdpNgSFecOutLabelIpAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgSFecOutLabelIpAddr 1.3.6.1.4.1.6527.3.1.2.91.36.1.4
If vRtrLdpNgSFecOutLabelType is set to 'swap' or 'push', the value of vRtrLdpNgSFecOutLabelIpAddr indicates the IP address of the next-hop. If vRtrLdpNgSFecOutLabelType is set to 'pop', the value of vRtrLdpNgSFecOutLabelIpAddr will be 0.0.0.0
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgSFecOutLabelRowStatus 1.3.6.1.4.1.6527.3.1.2.91.36.1.5
vRtrLdpNgSFecOutLabelRowStatus is used to create, delete or control entries in the vRtrLdpNgStaticFecOutLabelTable. An entry is created by setting vRtrLdpNgSFecOutLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecOutLabelRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgSFecOutLabel 1.3.6.1.4.1.6527.3.1.2.91.36.1.6
The value of vRtrLdpNgSFecOutLabel specifies the egress label associated with this next-hop entry. The LSR will swap the incoming label with the configured egress label. If the value of vRtrLdpNgSFecOutLabel is set to 4294967295, the LSR will pop the incoming label.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 16..1048575 | 4294967295  

vRtrLdpNgTargPeerTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.37
The value of vRtrLdpNgTargPeerTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgTargPeerTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgTargPeerTable 1.3.6.1.4.1.6527.3.1.2.91.38
vRtrLdpNgTargPeerTable provides an entry for each virtual router targeted peer configured to be used with the Label Distribution Protocol (LDP).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpTargPeerEntry

vRtrLdpNgTargPeerEntry 1.3.6.1.4.1.6527.3.1.2.91.38.1
Each row entry represents a targeted peer on this virtual router that participates in the LDP protocol. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgTargPeerRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgTargPeerRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpTargPeerEntry  

vRtrLdpNgPeerAddressType 1.3.6.1.4.1.6527.3.1.2.91.38.1.1
The value of vRtrLdpNgPeerAddressType specifies the address family type for vRtrLdpNgPeerAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgPeerAddress 1.3.6.1.4.1.6527.3.1.2.91.38.1.2
vRtrLdpNgPeerAddress specifies the targeted peer IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgTargPeerRowStatus 1.3.6.1.4.1.6527.3.1.2.91.38.1.3
vRtrLdpNgTargPeerRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgTargPeerTable. A row can be created by setting vRtrLdpNgTargPeerRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgTargPeerRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgTargPeerLastChange 1.3.6.1.4.1.6527.3.1.2.91.38.1.4
The value of vRtrLdpNgTargPeerLastChange indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgTargPeerAdminState 1.3.6.1.4.1.6527.3.1.2.91.38.1.5
The value of vRtrLdpNgTargPeerAdminState specifies the desired administrative state for this LDP targeted peer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrLdpNgTargPeerOperState 1.3.6.1.4.1.6527.3.1.2.91.38.1.6
The value of vRtrLdpNgTargPeerOperState indicates the current operational state of LDP targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrLdpNgTargPeerUpTime 1.3.6.1.4.1.6527.3.1.2.91.38.1.7
The value of vRtrLdpNgTargPeerUpTime indicates the time, in hundreds of seconds, that the targeted peer has been in current operational state vRtrLdpNgTargPeerOperState. If the value of vRtrLdpNgTargPeerOperState is 'inService (2)', then vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has been operationally up. If the value of vRtrLdpNgTargPeerOperState is 'outOfService (3)', then vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has been operationally down. If the value of vRtrLdpNgTargPeerOperState is 'transition (4)', then vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has been operationally in transition.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrLdpNgTargPeerOperDownReason 1.3.6.1.4.1.6527.3.1.2.91.38.1.8
The value of vRtrLdpNgTargPeerOperDownReason indicates the operational down reason for targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpIntTargOperDownReasonCode  

vRtrLdpNgTargPeerInheritance 1.3.6.1.4.1.6527.3.1.2.91.38.1.9
Some writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrLdpNgGeneralTable. vRtrLdpNgTargPeerInheritance controls whether to inherit the operational value of that object, or to use the administratively set value. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. When the bit for an object has value of one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value. The mask bit(s) will be set to one when SET is performed on the inherited object(s). Any attempt to set the mask bit to one will be silently discarded. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrLdpNgGeneralTable. This object is a bit-mask, with the following positions: vRtrLdpNgTargPeerKAFactor 0x1 vRtrLdpNgTargPeerKATimeout 0x2 vRtrLdpNgTargPeerHelloFactor 0x4 vRtrLdpNgTargPeerHelloTimeout 0x8 vRtrLdpNgTargPeerHelloReduction 0x10 vRtrLdpNgTargPeerHelloRdctnFctr 0x20
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgTargPeerKAFactor 1.3.6.1.4.1.6527.3.1.2.91.38.1.10
The value of vRtrLdpNgTargPeerKAFactor specifies the value by which the keepalive timeout (vRtrLdpNgTargPeerKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpKeepAliveFactor  

vRtrLdpNgTargPeerKATimeout 1.3.6.1.4.1.6527.3.1.2.91.38.1.11
The value of vRtrLdpNgTargPeerKATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgTargPeerKATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages).
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgTargPeerHelloFactor 1.3.6.1.4.1.6527.3.1.2.91.38.1.12
The value of vRtrLdpNgTargPeerHelloFactor specifies the value by which the hello timeout (vRtrLdpNgTargPeerHelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpHelloFactor  

vRtrLdpNgTargPeerHelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.38.1.13
The value of vRtrLdpNgTargPeerHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout  

vRtrLdpNgTargPeerOprHelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.38.1.14
The value of vRtrLdpNgTargPeerOprHelloTimeout indicates the operational hello time also known as hold time used by the operational targeted peer. It is the time interval that LDP waits before declaring a neighbor to be down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout 3..65535  

vRtrLdpNgTargPeerHelloReduction 1.3.6.1.4.1.6527.3.1.2.91.38.1.15
The value of vRtrLdpNgTargPeerHelloReduction specifies whether hello reduction to this targeted peer is enabled or not. If enabled, the sender advertises the dampened vRtrLdpNgTargPeerHelloTimeout, to the targeted peer after LDP session is established.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargPeerHelloRdctnFctr 1.3.6.1.4.1.6527.3.1.2.91.38.1.16
The value of vRtrLdpNgTargPeerHelloRdctnFctr specifies the number of hello messages that are sent at consistent vRtrLdpNgTargPeerHelloTimeout value before advertising further dampened vRtrLdpNgTargPeerHelloTimeout. An 'inconsistentValue' error is returned if this object is set when vRtrLdpNgTargPeerHelloReduction is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 3..20  

vRtrLdpNgTargPeerBackoffTime 1.3.6.1.4.1.6527.3.1.2.91.38.1.17
The value of vRtrLdpNgTargPeerBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it attempts to setup the session again. After the LDP session startup fails the first time, the backoff interval is set to the value of vRtrLdpNgTargPeerBackoffTime. Thereafter, if session startup fails again the backoff interval increases exponentially.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpBackoffTime 1..2592000  

vRtrLdpNgTargPeerMaxBackoffTime 1.3.6.1.4.1.6527.3.1.2.91.38.1.18
The value of vRtrLdpNgTargPeerMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router waits before retrying) increases exponentially. If the backoff interval exceeds vRtrLdpNgTargPeerMaxBackoffTime, the router will give up trying to establish the LDP session. If vRtrLdpNgTargPeerMaxBackoffTime has value of zero (0), then the backoff interval does not increase exponentially after the first session startup attempt fails. Instead it remains constant and LDP will keep retrying to establish a session until it succeeds.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpBackoffTime  

vRtrLdpNgTargPeerTunneling 1.3.6.1.4.1.6527.3.1.2.91.38.1.19
The value of vRtrLdpNgTargPeerTunneling specifies whether tunneling of LDP over tunnels is enabled. When this object has a value of 'true', tunneling is enabled. When its value is 'false', tunneling is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargPeerBfdEnabled 1.3.6.1.4.1.6527.3.1.2.91.38.1.20
The value of vRtrLdpNgTargPeerBfdEnabled specifies whether BFD tracking is enabled to the transport address of this peering session. When this object has a value of 'true', BFD tracking is enabled. When its value is 'false', BFD tracking is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargPeerLsrIfIndex 1.3.6.1.4.1.6527.3.1.2.91.38.1.21
The value of vRtrLdpNgTargPeerLsrIfIndex specifies the local interface index that is to be used as source LSR-ID to establish targeted hello adjacency with a LDP peer.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrLdpNgTargPeerAutoCreate 1.3.6.1.4.1.6527.3.1.2.91.38.1.22
The value of vRtrLdpNgTargPeerAutoCreate indicates whether or not the row entry was automatically created.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargPeerCreator 1.3.6.1.4.1.6527.3.1.2.91.38.1.23
The value of vRtrLdpNgTargPeerCreator indicates the creator of this row. A value of 'manual(1)' indicates the entry is created manually by the user. A value of 'template(2)' indicates the entry is auto created by template configuration. A value of 'sdp(3)' indicates the entry is auto created by service manager.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER manual(1), template(2), sdp(3)  

vRtrLdpNgTargPeerTemplName 1.3.6.1.4.1.6527.3.1.2.91.38.1.24
The value of vRtrLdpNgTargPeerTemplName specifies the template name that created this row. This object has valid value when vRtrLdpNgTargPeerCreator has value of template.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrLdpNgTargPeerLocalIpAddrType 1.3.6.1.4.1.6527.3.1.2.91.38.1.25
The value of vRtrLdpNgTargPeerLocalIpAddrType indicates the type of address indicated by vRtrLdpNgTargPeerLocalIpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgTargPeerLocalIpAddress 1.3.6.1.4.1.6527.3.1.2.91.38.1.26
The value of vRtrLdpNgTargPeerLocalIpAddress indicates the local IP address used in Hellos sent.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgTargPeerStatsTable 1.3.6.1.4.1.6527.3.1.2.91.39
The vRtrLdpNgTargPeerStatsTable is a read-only table. The purpose of this table is to keep statistical information about the Targeted peers on the LSR. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgTargPeerTable, and the augmenting table, vRtrLdpNgTargPeerStatsTable. This in effect extends the vRtrLdpNgTargPeerTable with additional columns. Creation or deletion of a row in the vRtrLdpNgTargPeerTable results in the same fate for the row in the vRtrLdpNgTargPeerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgTargPeerStatsEntry

vRtrLdpNgTargPeerStatsEntry 1.3.6.1.4.1.6527.3.1.2.91.39.1
A row in this table contains statistical information about an LDP Targeted peer. Some counters contained in a row are for fatal errors received during a former LDP Session associated with this entry. For example, an LDP Pdu received on a TCP connection during an LDP Session contains a fatal error. That error is counted here, because the session is terminated. If the error is NOT fatal (i.e. and the Session remains), then the error is counted in the vRtrLdpNgSessionStatsEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgTargPeerStatsEntry  

vRtrLdpNgTargPeerStatExistingAdj 1.3.6.1.4.1.6527.3.1.2.91.39.1.1
The value of vRtrLdpNgTargPeerStatExistingAdj indicates a count of the total active adjacencies with this targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgTargPeerStatsHelloRecv 1.3.6.1.4.1.6527.3.1.2.91.39.1.2
The value of vRtrLdpNgTargPeerStatsHelloRecv indicates number of Hello messages received with this targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgTargPeerStatsHelloSent 1.3.6.1.4.1.6527.3.1.2.91.39.1.3
The value of vRtrLdpNgTargPeerStatsHelloSent indicates the number of Hello messages sent with this targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgTargPeerStatsBadPduLen 1.3.6.1.4.1.6527.3.1.2.91.39.1.4
The value of vRtrLdpNgTargPeerStatsBadPduLen indicates the number of bad PDU length errors detected with this targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgTargPeerStatsBadMsgLen 1.3.6.1.4.1.6527.3.1.2.91.39.1.5
The value of vRtrLdpNgTargPeerStatsBadMsgLen indicates the number of bad message length errors detected with this targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgTargPeerStatsMalformTlv 1.3.6.1.4.1.6527.3.1.2.91.39.1.6
value of vRtrLdpNgTargPeerStatsMalformTlv indicates the number of malformed TLV value errors detected with this targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgTargPeerStatsBadProtVer 1.3.6.1.4.1.6527.3.1.2.91.39.1.7
The value of vRtrLdpNgTargPeerStatsBadProtVer indicates the number of bad protocol version errors detected with this targeted peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgInetIfTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.40
The value of vRtrLdpNgInetIfTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgInetIfTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgInetIfTable 1.3.6.1.4.1.6527.3.1.2.91.41
vRtrLdpNgInetIfTable provides an entry for each virtual router interface configuration to be used with the Label Distribution Protocol (LDP) for a given Inet address family.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgInetIfEntry

vRtrLdpNgInetIfEntry 1.3.6.1.4.1.6527.3.1.2.91.41.1
Each row entry represents an interface on this virtual router that participates in the LDP protocol for a given Inet address family. Corresponding interface entry must exist in vRtrLdpNgIfTable before creating an entry in this table. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgInetIfRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgInetIfRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgInetIfEntry  

vRtrLdpNgIfAddrType 1.3.6.1.4.1.6527.3.1.2.91.41.1.1
vRtrLdpNgIfAddrType indicates the Inet address family of this interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgInetIfRowStatus 1.3.6.1.4.1.6527.3.1.2.91.41.1.2
vRtrLdpNgInetIfRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgInetIfTable. A row can be created by setting vRtrLdpNgIfRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. Corresponding interface entry must exit in vRtrLdpNgIfTable before creating an entry in this table. A row entry can be destroyed by setting vRtrLdpNgInetIfRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgInetIfUpTime 1.3.6.1.4.1.6527.3.1.2.91.41.1.3
The value of vRtrLdpNgInetIfUpTime indicates the time, in hundreds of seconds, that the LDP interface has been in current operational state vRtrLdpNgIfOperState. If the value of vRtrLdpNgIfOperState is 'inService (2)', then vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has been operationally up. If the value of vRtrLdpNgIfOperState is 'outOfService (3)', then vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has been operationally down. If the value of vRtrLdpNgIfOperState is 'transition (4)', then vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has been operationally in transition.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrLdpNgInetIfLastChange 1.3.6.1.4.1.6527.3.1.2.91.41.1.4
The value of vRtrLdpNgInetIfLastChange indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgInetIfAdminState 1.3.6.1.4.1.6527.3.1.2.91.41.1.5
The value of vRtrLdpNgInetIfAdminState specifies the desired administrative state for this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrLdpNgInetIfOperState 1.3.6.1.4.1.6527.3.1.2.91.41.1.6
The value of vRtrLdpNgInetIfOperState indicates the current operational state of this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrLdpNgInetIfOperDownReason 1.3.6.1.4.1.6527.3.1.2.91.41.1.7
The value of vRtrLdpNgInetIfOperDownReason indicates the reason that the LDP interface is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpIntTargOperDownReasonCode  

vRtrLdpNgInetIfInheritance 1.3.6.1.4.1.6527.3.1.2.91.41.1.8
Some writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrLdpNgGeneralTable. vRtrLdpIfInheritance controls whether to inherit the operational value of that object, or use the administratively set value. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. When the bit for an object has value of one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value. The mask bit(s) will be set to one when set is performed on the inherited object(s). Any attempt to set the mask bit to one will be silently discarded. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrLdpNgGeneralTable. This object is a bit-mask, with the following positions: vRtrLdpNgInetIfKAFactor 0x1 vRtrLdpNgInetIfKATimeout 0x2 vRtrLdpNgInetIfHelloFactor 0x4 vRtrLdpNgInetIfHelloTimeout 0x8 vRtrLdpNgInetIfTransAddrType 0x10
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

vRtrLdpNgInetIfKAFactor 1.3.6.1.4.1.6527.3.1.2.91.41.1.9
The value of vRtrLdpNgInetIfKAFactor specifies the value by which the keepalive timeout (vRtrLdpNgInetIfKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpKeepAliveFactor  

vRtrLdpNgInetIfKATimeout 1.3.6.1.4.1.6527.3.1.2.91.41.1.10
The value of vRtrLdpNgInetIfKATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgInetIfKATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages).
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgInetIfHelloFactor 1.3.6.1.4.1.6527.3.1.2.91.41.1.11
The value of vRtrLdpNgInetIfHelloFactor specifies the value by which the hello timeout (vRtrLdpNgInetIfHelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpHelloFactor  

vRtrLdpNgInetIfHelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.41.1.12
The value of vRtrLdpNgInetIfHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout  

vRtrLdpNgInetIfOperHelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.41.1.13
The value of vRtrLdpNgInetIfOperHelloTimeout indicates the operational hello time also known as hold time used by the operational LDP interface. It is the time interval that LDP waits before declaring a neighbor to be down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout 3..65535  

vRtrLdpNgInetIfBackoffTime 1.3.6.1.4.1.6527.3.1.2.91.41.1.14
The value of vRtrLdpNgInetIfBackoffTime indicates the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it attempts to setup the session again. After the LDP session startup fails the first time, the backoff interval is set to the value of vRtrLdpNgInetIfBackoffTime. Thereafter, if session startup fails again the backoff interval increases exponentially.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpBackoffTime 1..2592000  

vRtrLdpNgInetIfMaxBackoffTime 1.3.6.1.4.1.6527.3.1.2.91.41.1.15
The value of vRtrLdpNgInetIfMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router waits before retrying) increases exponentially. If the backoff interval exceeds vRtrLdpNgInetIfMaxBackoffTime, the router will give up trying to establish the LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpBackoffTime  

vRtrLdpNgInetIfTransAddrType 1.3.6.1.4.1.6527.3.1.2.91.41.1.16
The value of vRtrLdpNgInetIfTransAddrType specifies the source of the transport address to be used when setting up the LDP TCP sessions. The interface's IP address is used to setup the LDP session between neighbors. If multiple interfaces exist between two neighbors, the 'interface' mode cannot be used since only one LDP session is actually set up between the two neighbors. When the value of this object is 'system', the system's IP address is used to set up the LDP session between neighbors.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER interface(1), system(2)  

vRtrLdpNgInetIfLsrIfType 1.3.6.1.4.1.6527.3.1.2.91.41.1.17
The value of vRtrLdpNgInetIfLsrIfType specifies whether the local interface address or the system interface address should be used as source Label Switch Router identifier (LSR-ID) to establish a link LDP adjacency with a LDP peer
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER system(1), interface(2)  

vRtrLdpNgInetIfLsrIfIndex 1.3.6.1.4.1.6527.3.1.2.91.41.1.18
The value of vRtrLdpNgInetIfLsrIfIndex specifies the local interface index that is to be used as source LSR-ID to establish link hello adjacency with a LDP peer.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrLdpNgInetIfIPv4P2MPFecCap 1.3.6.1.4.1.6527.3.1.2.91.41.1.19
The value of vRtrLdpNgInetIfIPv4P2MPFecCap specifies whether traffic exchange for IPv4 P2MP FECs is enabled or disabled on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrLdpNgInetIfIPv6P2MPFecCap 1.3.6.1.4.1.6527.3.1.2.91.41.1.20
The value of vRtrLdpNgInetIfIPv6P2MPFecCap specifies whether traffic exchange for IPv6 P2MP FECs is enabled or disabled on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrLdpNgInetIfIPv4PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.41.1.21
The value of vRtrLdpNgInetIfIPv4PfxFecCap specifies whether traffic exchange for IPv4 prefix FECs is enabled or disabled on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrLdpNgInetIfIPv6PfxFecCap 1.3.6.1.4.1.6527.3.1.2.91.41.1.22
The value of vRtrLdpNgInetIfIPv6PfxFecCap specifies whether traffic exchange for IPv6 prefix FECs is enabled or disabled this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrLdpNgInetIfLocalIpAddrType 1.3.6.1.4.1.6527.3.1.2.91.41.1.23
The value of vRtrLdpNgInetIfLocalIpAddrType indicates the type of address indicated by vRtrLdpNgInetIfLocalIpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgInetIfLocalIpAddress 1.3.6.1.4.1.6527.3.1.2.91.41.1.24
The value of vRtrLdpNgInetIfLocalIpAddress indicates the local IP address used in Hellos sent.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vLdpNgStatsTable 1.3.6.1.4.1.6527.3.1.2.91.42
vLdpNgStatsTable is a read-only table. The purpose of this table is to keep statistical information about an LDP Instance. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vLdpNgStatsTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vLdpNgStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgStatsEntry

vLdpNgStatsEntry 1.3.6.1.4.1.6527.3.1.2.91.42.1
A row in this table represents statistical information about an LDP instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgStatsEntry  

vLdpNgStatsIPv4OperDownEvents 1.3.6.1.4.1.6527.3.1.2.91.42.1.1
The value of vLdpNgStatsIPv4OperDownEvents indicates the number of times the IPv4 LDP instance has gone operationally down since the instance was created.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsIPv6OperDownEvents 1.3.6.1.4.1.6527.3.1.2.91.42.1.2
The value of vLdpNgStatsIPv6OperDownEvents indicates the number of times the IPv6 LDP instance has gone operationally down since the instance was created.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsIPv4ActiveSess 1.3.6.1.4.1.6527.3.1.2.91.42.1.3
The value of vLdpNgStatsIPv4ActiveSess indicates the number of active IPv4 sessions (i.e. session in some form of creation) associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6ActiveSess 1.3.6.1.4.1.6527.3.1.2.91.42.1.4
The value of vLdpNgStatsIPv6ActiveSess indicates the number of active IPv6 sessions (i.e. session in some form of creation) associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4ActiveLinkAdj 1.3.6.1.4.1.6527.3.1.2.91.42.1.5
The value of vLdpNgStatsIPv4ActiveLinkAdj indicates the number of active IPv4 link adjacencies (i.e. established adjacencies) associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6ActiveLinkAdj 1.3.6.1.4.1.6527.3.1.2.91.42.1.6
The value of vLdpNgStatsIPv6ActiveLinkAdj indicates the number of active IPv6 link adjacencies (i.e. established adjacencies) associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4ActiveTargAdj 1.3.6.1.4.1.6527.3.1.2.91.42.1.7
The value of vLdpNgStatsIPv4ActiveTargAdj indicates the number of active IPv4 target adjacencies (i.e. established sessions) associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6ActiveTargAdj 1.3.6.1.4.1.6527.3.1.2.91.42.1.8
The value of vLdpNgStatsIPv6ActiveTargAdj indicates the number of active IPv6 target adjacencies (i.e. established sessions) associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4ActiveIf 1.3.6.1.4.1.6527.3.1.2.91.42.1.9
The value of vLdpNgStatsIPv4ActiveIf indicates the number of active (i.e. operationally up) IPv4 interfaces associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6ActiveIf 1.3.6.1.4.1.6527.3.1.2.91.42.1.10
The value of vLdpNgStatsIPv6ActiveIf indicates the number of active (i.e. operationally up) IPv6 interfaces associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4InactiveIf 1.3.6.1.4.1.6527.3.1.2.91.42.1.11
The value of vLdpNgStatsIPv4InactiveIf indicates the number of inactive (i.e. operationally down) IPv4 interfaces associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6InactiveIf 1.3.6.1.4.1.6527.3.1.2.91.42.1.12
The value of vLdpNgStatsIPv6InactiveIf indicates the number of inactive (i.e. operationally down) IPv6 interfaces associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4ActiveTargPeers 1.3.6.1.4.1.6527.3.1.2.91.42.1.13
The value of vLdpNgStatsIPv4ActiveTargPeers indicates the number of configured IPv4 targeted peers that are administratively up in an LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6ActiveTargPeers 1.3.6.1.4.1.6527.3.1.2.91.42.1.14
The value of vLdpNgStatsIPv6ActiveTargPeers indicates the number of configured IPv6 targeted peers that are administratively up in an LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4InactiveTargPeers 1.3.6.1.4.1.6527.3.1.2.91.42.1.15
The value of vLdpNgStatsIPv4InactiveTargPeers indicates the number of inactive (i.e. operationally down) IPv4 targeted sessions associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6InactiveTargPeers 1.3.6.1.4.1.6527.3.1.2.91.42.1.16
The value of vLdpNgStatsIPv6InactiveTargPeers indicates the number of inactive (i.e. operationally down) IPv6 targeted sessions associated with the LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4PfxFecRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.17
The value of vLdpNgStatsIPv4PfxFecRecv indicates the number of IPv4 Address FECs received by the LDP instance from its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6PfxFecRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.18
The value of vLdpNgStatsIPv6PfxFecRecv indicates the number of IPv6 Address FECs received by the LDP instance from its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4PfxFecSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.19
The value of vLdpNgStatsIPv4PfxFecSent indicates the number of IPv4 Address FECs sent by the LDP instance to its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6PfxFecSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.20
The value of vLdpNgStatsIPv6PfxFecSent indicates the number of IPv6 Address FECs sent by the LDP instance to its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec128FecSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.21
The value of vLdpNgStatsFec128FecSent indicates the number of Pseudo wire ID FECs sent by the LDP instance to its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec128FecRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.22
The value of vLdpNgStatsFec128FecRecv indicates the number of Pseudo wire ID FECs received by the LDP instance from its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec129FecSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.23
The value of vLdpNgStatsFec129FecSent indicates the number of General Pseudo wire ID FECs sent by the LDP instance to its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec129FecRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.24
The value of vLdpNgStatsFec129FecRecv indicates the number of General Pseudo wire ID FECs received by the LDP instance from its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4AttemptedSessions 1.3.6.1.4.1.6527.3.1.2.91.42.1.25
The value of vLdpNgStatsIPv4AttemptedSessions indicates the total number of attempted IPv4 sessions for this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsIPv6AttemptedSessions 1.3.6.1.4.1.6527.3.1.2.91.42.1.26
The value of vLdpNgStatsIPv6AttemptedSessions indicates the total number of attempted IPv6 sessions for this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsSessRejNoHelloErrs 1.3.6.1.4.1.6527.3.1.2.91.42.1.27
The value of vLdpNgStatsSessRejNoHelloErrs gives the total number of Session Rejected/No Hello Error Notification Messages sent or received by this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsSessRejAdvErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.28
The value of vLdpNgStatsSessRejAdvErrors gives the total number of Session Rejected/Parameters Advertisement Mode Error Notification Messages sent or received by this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsSessRejMaxPduErrs 1.3.6.1.4.1.6527.3.1.2.91.42.1.29
The value of vLdpNgStatsSessRejMaxPduErrs gives the total number of Session Rejected/Parameters Max Pdu Length Error Notification Messages sent or received by this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsSessRejLblRngeErrs 1.3.6.1.4.1.6527.3.1.2.91.42.1.30
The value of vLdpNgStatsSessRejLblRngeErrs gives the total number of Session Rejected/Parameters Label Range Error Notification Messages sent or received by this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsBadLdpIdErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.31
The value of vLdpNgStatsBadLdpIdErrors gives the number of Bad LDP Identifier Fatal Errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsBadPduLengthErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.32
The value of vLdpNgStatsBadPduLengthErrors gives the number of Bad Pdu Length Fatal Errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsBadMsgLengthErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.33
The value of vLdpNgStatsBadMsgLengthErrors gives the number of Bad Message Length Fatal Errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsBadTlvLengthErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.34
The value of vLdpNgStatsBadTlvLengthErrors gives the number of Bad TLV Length Fatal Errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsMalformedTlvErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.35
The value of vLdpNgStatsMalformedTlvErrors gives the number of Malformed TLV Value Fatal Errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsKeepAliveExpErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.36
The value of vLdpNgStatsKeepAliveExpErrors gives the number of Session Keep Alive Timer Expired Errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsShutdownNotifRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.37
The value of vLdpNgStatsShutdownNotifRecv gives the number of Shutdown Notifications received related to sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsShutdownNotifSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.38
The value of vLdpNgStatsShutdownNotifSent gives the number of Shutdown Notifications sent related to sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsIPv4EgrFecPfxCount 1.3.6.1.4.1.6527.3.1.2.91.42.1.39
The value of vLdpNgStatsIPv4EgrFecPfxCount indicates the number of IPv4 egress FEC prefix statistics configured for this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsIPv6EgrFecPfxCount 1.3.6.1.4.1.6527.3.1.2.91.42.1.40
The value of vLdpNgStatsIPv6EgrFecPfxCount indicates the number of IPv6 egress FEC prefix statistics configured for this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsUnknownTlvErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.41
The value of vLdpNgStatsUnknownTlvErrors indicates the number of Unknown TLV Fatal Errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vLdpNgStatsIPv4P2MPFecSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.42
The value of vLdpNgStatsIPv4P2MPFecSent indicates the number of IPv4 P2MP FECs sent by the LDP instance to its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6P2MPFecSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.43
The value of vLdpNgStatsIPv6P2MPFecSent indicates the number of IPv6 P2MP FECs sent by the LDP instance to its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4P2MPFecRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.44
The value of vLdpNgStatsIPv4P2MPFecRecv indicates the number of IPv4 P2MP FECs received by the LDP instance from its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6P2MPFecRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.45
The value of vLdpNgStatsIPv6P2MPFecRecv indicates the number of IPv6 P2MP FECs received by the LDP instance from its neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4PfxFecOLSessSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.46
The value of vLdpNgStatsIPv4PfxFecOLSessSent indicates the number of Overload Notifications sent for IPv4 address FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6PfxFecOLSessSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.47
The value of vLdpNgStatsIPv6PfxFecOLSessSent indicates the number of Overload Notifications sent for IPv6 address FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4PfxFecOLSessRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.48
The value of vLdpNgStatsIPv4PfxFecOLSessRecv indicates the number of Overload Notifications received for IPv4 address FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6PfxFecOLSessRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.49
The value of vLdpNgStatsIPv6PfxFecOLSessRecv indicates the number of Overload Notifications received for IPv6 address FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4P2MPFecOLSessSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.50
The value of vLdpNgStatsIPv4P2MPFecOLSessSent indicates the number of Overload Notifications sent for IPv4 P2MP FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6P2MPFecOLSessSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.51
The value of vLdpNgStatsIPv6P2MPFecOLSessSent indicates the number of Overload Notifications sent for IPv6 P2MP FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4P2MPFecOLSessRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.52
The value of vLdpNgStatsIPv4P2MPFecOLSessRecv indicates the number of Overload Notifications received for IPv4 P2MP FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6P2MPFecOLSessRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.53
The value of vLdpNgStatsIPv6P2MPFecOLSessRecv indicates the number of Overload Notifications received for IPv6 P2MP FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec128FecOLSessSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.54
The value of vLdpNgStatsFec128FecOLSessSent indicates the number of Overload Notifications sent for PW ID FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec128FecOLSessRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.55
The value of vLdpNgStatsFec128FecOLSessRecv indicates the number of Overload Notifications received for PW ID FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec129FecOLSessSent 1.3.6.1.4.1.6527.3.1.2.91.42.1.56
The value of vLdpNgStatsFec129FecOLSessSent indicates the number of Overload Notifications sent for General PW ID FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec129FecOLSessRecv 1.3.6.1.4.1.6527.3.1.2.91.42.1.57
The value of vLdpNgStatsFec129FecOLSessRecv indicates the number of Overload Notifications received for General PW ID FEC over sessions in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4OLoadInterfaces 1.3.6.1.4.1.6527.3.1.2.91.42.1.58
The value of vLdpNgStatsIPv4OLoadInterfaces indicates the number of overloaded IPv4 interfaces in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6OLoadInterfaces 1.3.6.1.4.1.6527.3.1.2.91.42.1.59
The value of vLdpNgStatsIPv6OLoadInterfaces indicates the number of overloaded IPv6 interfaces in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4OLoadTargPeers 1.3.6.1.4.1.6527.3.1.2.91.42.1.60
The value of vLdpNgStatsIPv4OLoadTargPeers indicates the number of overloaded IPv4 targeted peers in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6OLoadTargPeers 1.3.6.1.4.1.6527.3.1.2.91.42.1.61
The value of vLdpNgStatsIPv6OLoadTargPeers indicates the number of overloaded IPv6 targeted peers in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4PfxFecInOLoad 1.3.6.1.4.1.6527.3.1.2.91.42.1.62
The value of vLdpNgStatsIPv4PfxFecInOLoad indicates the number IPv4 Address FEC in overload state in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6PfxFecInOLoad 1.3.6.1.4.1.6527.3.1.2.91.42.1.63
The value of vLdpNgStatsIPv6PfxFecInOLoad indicates the number IPv6 Address FEC in overload state in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv4P2MPFecInOLoad 1.3.6.1.4.1.6527.3.1.2.91.42.1.64
The value of vLdpNgStatsIPv4P2MPFecInOLoad indicates the number IPv4 P2MP FEC in overload state in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsIPv6P2MPFecInOLoad 1.3.6.1.4.1.6527.3.1.2.91.42.1.65
The value of vLdpNgStatsIPv6P2MPFecInOLoad indicates the number IPv4 P2MP FEC in overload state in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec128FecInOLoad 1.3.6.1.4.1.6527.3.1.2.91.42.1.66
The value of vLdpNgStatsFec128FecInOLoad indicates the number PW ID FEC in overload state in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsFec129FecInOLoad 1.3.6.1.4.1.6527.3.1.2.91.42.1.67
The value of vLdpNgStatsFec129FecInOLoad indicates the number General PW ID FEC in overload state in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vLdpNgStatsBadProtVersionErrors 1.3.6.1.4.1.6527.3.1.2.91.42.1.68
The value of vLdpNgStatsBadProtVersionErrors indicates the number of bad protocol version errors detected for sessions associated with this LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLdpNgCapabilityTable 1.3.6.1.4.1.6527.3.1.2.91.43
vRtrLdpNgCapabilityTable is a read-only table. The purpose of this table is to keep capability information about an LDP Instance. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgCapabilityTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgCapabilityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgCapabilityEntry

vRtrLdpNgCapabilityEntry 1.3.6.1.4.1.6527.3.1.2.91.43.1
An row in this table contains capability information about an LDP instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgCapabilityEntry  

vRtrLdpNgGenP2MPCapability 1.3.6.1.4.1.6527.3.1.2.91.43.1.1
The value of vRtrLdpNgGenP2MPCapability indicates whether Point-to-Multipoint (P2MP) FEC capability is supported in the LDP instance or not. When the value is 'true', the LDP instance is P2MP capable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenMPMBBCapability 1.3.6.1.4.1.6527.3.1.2.91.43.1.2
The value of vRtrLdpNgGenMPMBBCapability indicates whether Multipoint(MP) Make-Before-Break (MBB) capability is supported in the LDP instance or not. When the value is 'true', the LDP instance is MP MBB capable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenDynamicCapability 1.3.6.1.4.1.6527.3.1.2.91.43.1.3
The value of vRtrLdpNgGenDynamicCapability indicates whether dynamic capability negotiation is supported or not in LDP sessions associated with the LDP instance. When 'true', the LDP instance supports dynamic capability negotiation.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenOverloadCapability 1.3.6.1.4.1.6527.3.1.2.91.43.1.4
The value of vRtrLdpNgGenOverloadCapability indicates whether LSR Overload is supported or not in LDP sessions associated with the LDP instance. When 'true', the LDP instance is LSR overload capable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenFec128Capability 1.3.6.1.4.1.6527.3.1.2.91.43.1.5
The value of vRtrLdpNgGenFec128Capability indicates whether or not PW (Pseudowire) ID FEC capability is supported in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenFec129Capability 1.3.6.1.4.1.6527.3.1.2.91.43.1.6
The value of vRtrLdpNgGenFec129Capability indicates whether or not General PW ID FEC capability is supported in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenIPv4PfxFecCapability 1.3.6.1.4.1.6527.3.1.2.91.43.1.7
The value of vRtrLdpNgGenIPv4PfxFecCapability indicates whether or not IPv4 Prefix FEC capability is supported in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenIPv6PfxFecCapability 1.3.6.1.4.1.6527.3.1.2.91.43.1.8
The value of vRtrLdpNgGenIPv6PfxFecCapability indicates whether or not IPv6 Prefix FEC capability is supported in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenUnregNotiCapability 1.3.6.1.4.1.6527.3.1.2.91.43.1.9
The value of vRtrLdpNgGenUnregNotiCapability indicates whether or not Unrecognized Notification capability is supported in LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTcpSessParamsTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.44
The value of vRtrLdpNgTcpSessParamsTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgTcpSessParamsTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgTcpSessParamsTable 1.3.6.1.4.1.6527.3.1.2.91.45
vRtrLdpNgTcpSessParamsTable is used to configure parameters applicable to TCP transport session of an LDP session to remote peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgTcpSessParamsEntry

vRtrLdpNgTcpSessParamsEntry 1.3.6.1.4.1.6527.3.1.2.91.45.1
Each row entry represents information applicable to TCP session to far end peer. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgTcpSessRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgTcpSessRowStatus to 'destroy'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgTcpSessParamsEntry  

vRtrLdpNgTcpSessPeerAddrType 1.3.6.1.4.1.6527.3.1.2.91.45.1.1
The value of vRtrLdpNgTcpSessPeerAddrType specifies the IP address type for vRtrLdpNgTcpSessPeerAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpNgTcpSessPeerAddr 1.3.6.1.4.1.6527.3.1.2.91.45.1.2
The value of vRtrLdpNgTcpSessPeerAddr specifies the remote TCP transport address to use for an LDP session to a peer. This value corresponds to peer address (vRtrLdpNgSessPeerAddress) of LDP session.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrLdpNgTcpSessRowStatus 1.3.6.1.4.1.6527.3.1.2.91.45.1.3
vRtrLdpNgTcpSessRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgTcpSessParamsTable. A row can be created by setting vRtrLdpNgTcpSessRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgTcpSessRowStatus to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpNgTcpSessAuth 1.3.6.1.4.1.6527.3.1.2.91.45.1.4
When the value of vRtrLdpNgTcpSessAuth is 'none', no authentication is used. When the value of this object is 'md5', authentication using MD5 message based digest protocol is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), md5(2)  

vRtrLdpNgTcpSessAuthKey 1.3.6.1.4.1.6527.3.1.2.91.45.1.5
The string specified in vRtrLdpNgTcpSessAuthKey is the authentication key to be used between two LDP neighbors before establishing TCP transport session of the LDP protocol stream. Authentication is done using the MD-5 message based digest protocol. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. An SNMP Get request on this object should return an OCTET STRING of length 0.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vRtrLdpNgTcpSessAuthKeyChain 1.3.6.1.4.1.6527.3.1.2.91.45.1.6
The value of vRtrLdpNgTcpSessAuthKeyChain specifies the keychain which will be used to sign and/or authenticate TCP transport session of the LDP protocol stream. The keychain name is defined by tmnxKeyChainName and is the index for TIMETRA-SECURITY-MIB::tmnxKeyChainTable
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrLdpNgTcpSessPMTUDiscovery 1.3.6.1.4.1.6527.3.1.2.91.45.1.7
The value of vRtrLdpNgTcpSessPMTUDiscovery specifies whether path MTU discovery is enabled for this TCP transport session. When the value is set to 'true', path MTU discovery is enabled for this TCP transport session. When the value is set to 'false', path MTU discovery is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTcpSessMinTTLValue 1.3.6.1.4.1.6527.3.1.2.91.45.1.8
The value of vRtrLdpNgTcpSessMinTTLValue specifies the minimum TTL value for an incoming LDP packet. If vRtrLdpNgTcpSessMinTTLValue is set to zero (0), the TTL Security feature is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..255  

vRtrLdpNgGeneralTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.46
The value of vRtrLdpNgGeneralTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgGeneralTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgGeneralTable 1.3.6.1.4.1.6527.3.1.2.91.47
vRtrLdpNgGeneralTable has an entry for each virtual router in the system capable of supporting an instance of the Label Distribution Protocol (LDP).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgGeneralEntry

vRtrLdpNgGeneralEntry 1.3.6.1.4.1.6527.3.1.2.91.47.1
Each row entry represents an instance of the Label Distribution Protocol (LDP) for a virtual router in the system. An entry in this table is created by the agent when vRtrLdpStatus in the vRtrConfTable is set to 'create'. The entry is destroyed when vRtrLdpStatus is set to 'delete' but only if vRtrLdpNgGenAdminState has a value of 'outOfService'.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgGeneralEntry  

vRtrLdpNgGenCreateTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.1
The value of vRtrLdpNgGenCreateTime indicates the sysUpTime when this LDP instance was created.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgGenIPv4UpTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.2
The value of vRtrLdpNgGenIPv4UpTime indicates the time, in hundreds of seconds, that the IPv4 LDP instance has been in current operational state (vRtrLdpNgGenIPv4OperState). If the value of vRtrLdpNgGenIPv4OperState is 'inService (2)', then vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance has been operationally up. If the value of vRtrLdpNgGenIPv4OperState is 'outOfService (3)', then vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance has been operationally down. If the value of vRtrLdpNgGenIPv4OperState is 'transition (4)', then vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance has been operationally in transition.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrLdpNgGenIPv6UpTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.3
The value of vRtrLdpNgGenIPv6UpTime indicates the time, in hundreds of seconds, that the IPv6 LDP instance has been in current operational state (vRtrLdpNgGenIPv6OperState). If the value of vRtrLdpNgGenIPv6OperState is 'inService (2)', then vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance has been operationally up. If the value of vRtrLdpNgGenIPv6OperState is 'outOfService (3)', then vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance has been operationally down. If the value of vRtrLdpNgGenIPv6OperState is 'transition (4)', then vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance has been operationally in transition.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrLdpNgGenLastChange 1.3.6.1.4.1.6527.3.1.2.91.47.1.4
The value of vRtrLdpNgGenLastChange indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgGenAdminState 1.3.6.1.4.1.6527.3.1.2.91.47.1.5
The value of vRtrLdpNgGenAdminState specifies the desired administrative state for this LDP instance.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

vRtrLdpNgGenIPv4OperState 1.3.6.1.4.1.6527.3.1.2.91.47.1.6
The value of vRtrLdpNgGenIPv4OperState indicates the current operational state of this IPv4 LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrLdpNgGenIPv6OperState 1.3.6.1.4.1.6527.3.1.2.91.47.1.7
The value of vRtrLdpNgGenIPv6OperState indicates the current operational state of this IPv6 LDP instance.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrLdpNgGenIPv4OperDownReason 1.3.6.1.4.1.6527.3.1.2.91.47.1.8
The value of vRtrLdpNgGenIPv4OperDownReason indicates the reason that the IPv4 LDP instance is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpGenOperDownReasonCode  

vRtrLdpNgGenIPv6OperDownReason 1.3.6.1.4.1.6527.3.1.2.91.47.1.9
The value of vRtrLdpNgGenIPv6OperDownReason indicates the reason that the IPv6 LDP instance is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpGenOperDownReasonCode  

vRtrLdpNgGenLdpIPv4LsrId 1.3.6.1.4.1.6527.3.1.2.91.47.1.10
The value of vRtrLdpNgGenLdpIPv4LsrId is the IPv4 Label Switch Router (LSR) identifier which is used as the first 4 bytes or the Router Id component of the Label Distribution Protocol (LDP) identifier.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLsrIdentifier  

vRtrLdpNgGenLdpIPv6LsrId 1.3.6.1.4.1.6527.3.1.2.91.47.1.11
The value of vRtrLdpNgGenLdpIPv6LsrId is the IPv6 Label Switch Router (LSR) identifier which is used as the first 16 bytes or the Router Id component of the Label Distribution Protocol (LDP) identifier.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsLsrNgIdentifier  

vRtrLdpNgGenProtocolVersion 1.3.6.1.4.1.6527.3.1.2.91.47.1.12
The value of vRtrLdpNgGenProtocolVersion specifies the version of the LDP protocol instance. A value of zero (0) indicates that the version of the protocol is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrLdpNgGenBackoffTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.13
The value of vRtrLdpNgGenBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it attempts to setup the session again. After the LDP session startup fails the first time, the backoff interval is set to the value of vRtrLdpNgGenBackoffTime. Thereafter, if session startup fails again the backoff interval increases exponentially.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpBackoffTime 1..2592000  

vRtrLdpNgGenMaxBackoffTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.14
The value of vRtrLdpNgGenMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router waits before retrying) increases exponentially. If the backoff interval exceeds vRtrLdpNgGenMaxBackoffTime, the router will give up trying to establish the LDP session. If vRtrLdpNgGenMaxBackoffTime is set to zero (0), then the backoff interval does not increase exponentially after the first session startup attempt fails. Instead it remains constant and LDP will keep retrying to establish a session until it succeeds.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpBackoffTime  

vRtrLdpNgGenTunnelDownDampTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.15
The value of vRtrLdpNgGenTunnelDownDampTime specifies the time interval, in seconds, that LDP waits before posting a tunnel down event to the Route Table Manager. If a tunnel up event is generated before the damping interval has elapsed, a tunnel modify event will be posted to the Route Table Manager (RTM). If this value is set to 0, then tunnel down events are not damped.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..20  

vRtrLdpNgGenGracefulRestart 1.3.6.1.4.1.6527.3.1.2.91.47.1.16
The value of vRtrLdpNgGenGracefulRestart specifies whether graceful restart helper is allowed. When this object has a value of 'true', graceful restart helper is enabled. When its value is 'false', graceful restart helper is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenGRNbrLiveTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.17
The value of vRtrLdpNgGenGRNbrLiveTime specifies the value for neighbor liveness timer. The amount of time the Label Switching Router (LSR) keeps its stale label-FEC bindings is set to the lesser of the FT Reconnect Timeout, as was advertised by the neighbor, and this local timer, called the Neighbor Liveness Timer. The LSR waits for the specified time till a LDP session re-establishes itself. If within that time the LSR still does not establish an LDP session with the neighbor, all the stale bindings are deleted. This object has meaning only when vRtrLdpNgGenGracefulRestart is 'true'.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..300  

vRtrLdpNgGenGRMaxRecoveryTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.18
The value of vRtrLdpNgGenGRMaxRecoveryTime specifies the local maximum recovery time. If the Label Switching Router (LSR) determines that the neighbor was able to preserve its MPLS forwarding state (as was indicated by the non-zero Recovery Time advertised by the neighbor), the LSR should further keep the stale label-FEC bindings, received from the neighbor, for as long as the lesser of the Recovery Time advertised by the neighbor, and a local configurable value, called Maximum Recovery Time, allows. This object has meaning only when vRtrLdpNgGenGracefulRestart is 'true'.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 15..1800  

vRtrLdpNgGenLabelWithdrawalDelay 1.3.6.1.4.1.6527.3.1.2.91.47.1.19
The value of vRtrLdpNgGenLabelWithdrawalDelay specifies the time interval, in seconds, LDP will delay for the withdrawal of FEC-label binding it distributed to its neighbours when FEC is de-activated. When the timer expires, LDP then sends a label withdrawal for the FEC to all its neighbours. This is applicable only to LDP transport tunnels (ipv4 prefix FECs) and is not applicable to Pseudowires (service FECs). A value of 0 indicates that vRtrLdpNgGenLabelWithdrawalDelay is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 3..120  

vRtrLdpNgGenImplicitNull 1.3.6.1.4.1.6527.3.1.2.91.47.1.20
The value of vRtrLdpNgGenImplicitNull specifies whether or not to signal implicit null values for all LDP FECs for which this node is an egress Label Edge Router (LER). When the value is true implicit null values are signaled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenShortTTLPropLocal 1.3.6.1.4.1.6527.3.1.2.91.47.1.21
The value of vRtrLdpNgGenShortTTLPropLocal specifies whether or not to enable the propagation of time to live (TTL) from the header of IP packet into the header of resulting MPLS packet for all local packets forwarded over a LDP shortcut. When the value is set to 'true' TTL is propagated from the header of IP packet into the header of the resulting MPLS packet for all local packets.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenShortTTLPropTransit 1.3.6.1.4.1.6527.3.1.2.91.47.1.22
The value of vRtrLdpNgGenShortTTLPropTransit specifies whether or not to enable the propagation of time to live (TTL) from the header of IP packet into the header of resulting MPLS packet for all transit packets forwarded over a LDP shortcut. When the value is set to 'true' TTL is propagated from the header of IP packet into the header of the resulting MPLS packet for all transit packets.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenMPMBBTime 1.3.6.1.4.1.6527.3.1.2.91.47.1.23
The value of vRtrLdpNgGenMPMBBTime specifies the maximum time a Multi Point (MP) transit node must wait before switching over to a new path if the new node does not send Make Before Break (MBB) Tag Length Value (TLV) to inform of the availability of the data plane.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10  

vRtrLdpNgGenLdpFrr 1.3.6.1.4.1.6527.3.1.2.91.47.1.24
The value of vRtrLdpNgGenLdpFrr specifies whether fast re-route of LDP tunnel is enabled or disabled. When the value of vRtrLdpNgGenLdpFrr is set to 'true' fast re-route of LDP tunnel is enabled and when vRtrLdpNgGenLdpFrr is set to 'false' fast re-route of LDP tunnel is disabled. When disabling vRtrLdpNgGenLdpFrr, the setting for FRR via segmented-routing tunnel stitching (vRtrLdpNgGenFrrSRStitch) must also be disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenMcastUpstreamFrr 1.3.6.1.4.1.6527.3.1.2.91.47.1.25
The value of vRtrLdpNgGenMcastUpstreamFrr specifies whether mLDP fast upstream switchover feature is enabled or not for the LDP instance. When 'true', the LDP instance supports mLDP fast upstream switchover.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenDeaggregateFec 1.3.6.1.4.1.6527.3.1.2.91.47.1.26
When vRtrLdpNgGenDeaggregateFec has a value of 'false', LDP aggregates multiple prefixes into a single Forwarding Equivalence Class (FEC) and advertises a single label for the FEC. When the value is 'true', LDP deaggregates prefixes into multiple FECs.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenControlMode 1.3.6.1.4.1.6527.3.1.2.91.47.1.27
The value of vRtrLdpNgGenControlMode specifies the mode used for distributing labels in response to label binding requests. When vRtrLdpNgGenControlMode has a value of 'ordered', label bindings are not distributed in response to a label request until a label binding has been received from the next hop for the destination. When vRtrLdpNgGenControlMode has a value of 'independent', label bindings are distributed immediately in response to a label request even if a label binding has not yet been received from the next hop for the destination.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ordered(1), independent(2)  

vRtrLdpNgGenDistMethod 1.3.6.1.4.1.6527.3.1.2.91.47.1.28
The value of vRtrLdpNgGenDistMethod specifies the label distribution method used. When vRtrLdpNgGenDistMethod has a value of 'downstreamOnDemand', label bindings are distributed to the upstream LSR, for each FEC, without requiring a request message for the FEC from the upstream LSR. When vRtrLdpNgGenDistMethod has a value of 'downstreamUnsolicited', label bindings are distributed to the upstream LSR only when a label request message is received.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpLabelDistMethod  

vRtrLdpNgGenRetentionMode 1.3.6.1.4.1.6527.3.1.2.91.47.1.29
The value of vRtrLdpNgGenRetentionMode specifies the label retention mode used. If the value of this object is 'conservative', then advertised label mappings are retained only if they will be used to forward packets, i.e. if the label came from a valid next hop. Label bindings received from non-nexthops for each FEC are discarded. If the value of this object is 'liberal', then all advertised label mappings are retained whether they are from a valid next hop or not. When vRtrLdpNgGenDistMethod has a value of 'downstreamUnsolicited', a LSR may receive label bindings for the same destination for all its neighbors. Labels for the non-nexthops for the FECs are retained in the software but not used. When a network topology change occurs where a non-nexthop becomes a true next hop, the label received earlier is then used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER conservative(1), liberal(2)  

vRtrLdpNgGenPropagatePolicy 1.3.6.1.4.1.6527.3.1.2.91.47.1.30
The value of vRtrLdpNgGenPropagatePolicy determines whether the LSR should generate FECs and which FECs it should generate. When the value of this object is 'system', LDP will distribute label bindings only for the router's system IP address When the value of this object is 'interface', LDP will distribute label bindings for all LDP interfaces When the value of this object is 'all', LDP will distribute label bindings for all prefixes in the routing table When the value of this object is 'none', LDP will not distribute any label bindings.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECPolicy  

vRtrLdpNgGenLoopDetectCap 1.3.6.1.4.1.6527.3.1.2.91.47.1.31
The value of vRtrLdpNgGenLoopDetectCap indicates whether this LSR supports loop detection and if so, what type of loop detection is supported. When the value is 'none' loop detection is not supported on this LSR. When the value is 'other' Loop Detection is supported but by a method other than those listed below. When the value is 'hopCount' Loop Detection is supported by Hop Count only. When the value is 'pathVector' Loop Detection is supported by Path Vector only. When the value is 'hopCountAndPathVector' Loop Detection is supported by both Hop Count and Path Vector. Since Loop Detection is determined during Session Initialization, an individual session may not be running with loop detection. This object simply gives an indication of whether or not the LSR has the ability to support Loop Detection and which types.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), other(2), hopCount(3), pathVector(4), hopCountAndPathVector(5)  

vRtrLdpNgGenHopLimit 1.3.6.1.4.1.6527.3.1.2.91.47.1.32
The value of vRtrLdpNgGenHopLimit specifies the maximum allowable value for the hop count. The value of this object is valid and used only if vRtrLdpNgGenLoopDetectCap has a value of either 'hopCount' or 'hopCountAndPathVector'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrLdpNgGenPathVectorLimit 1.3.6.1.4.1.6527.3.1.2.91.47.1.33
The value of vRtrLdpNgGenPathVectorLimit specifies the maximum allowable value for the path vector count. The value of this object is valid and used only if vRtrLdpNgGenLoopDetectCap has a value of either 'pathVector' or 'hopCountAndPathVector'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrLdpNgGenRoutePreference 1.3.6.1.4.1.6527.3.1.2.91.47.1.34
The value of vRtrLdpNgGenRoutePreference specifies the route preference assigned to LDP routes. When multiple routes are available to a destination, the route with the lowest preference will be used.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

vRtrLdpNgGenClassForwarding 1.3.6.1.4.1.6527.3.1.2.91.47.1.35
The value of vRtrLdpNgGenClassForwarding indicates whether class forwarding is enabled or not for LDP-over-RSVP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenIpv4LsrInterop 1.3.6.1.4.1.6527.3.1.2.91.47.1.36
The value of vRtrLdpNgGenIpv4LsrInterop specifies if interoperability with legacy IPv4 LSR implementations which do not comply to the processing of Hello TLVs with the U-bit set is allowed.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenEntropyLblCapability 1.3.6.1.4.1.6527.3.1.2.91.47.1.37
The value of vRtrLdpNgGenEntropyLblCapability specifies whether entropy label capability is enabled or not on the LDP node. When the value of vRtrLdpNgGenEntropyLblCapability is set to 'true', the egress LER will advertise that it is capable of receiving and processing the entropy label.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgGenFrrSRStitch 1.3.6.1.4.1.6527.3.1.2.91.47.1.38
The value of vRtrLdpNgGenFrrSRStitch specifies whether fast re-route of LDP tunnel via a segmented-routing tunnel is enabled or disabled. When the value of vRtrLdpNgGenFrrSRStitch is set to 'true' fast re-route of LDP tunnel via SR tunnel is enabled and when vRtrLdpNgGenFrrSRStitch is set to 'false' fast re-route of LDP tunnel via SR tunnel is disabled. Regular LDP FRR must be enabled via vRtrLdpNgGenLdpFrr in order to enable FRR via segmented-routing tunnel stitching.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgPolicyTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.48
The value of vRtrLdpNgPolicyTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgPolicyTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgPolicyTable 1.3.6.1.4.1.6527.3.1.2.91.49
vRtrLdpNgGeneralTable keeps information about LDP policies. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpTargTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpTargTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgPolicyEntry

vRtrLdpNgPolicyEntry 1.3.6.1.4.1.6527.3.1.2.91.49.1
A row in this table represents information about the policy configuration in LDP
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgPolicyEntry  

vRtrLdpNgPolRowLastCh 1.3.6.1.4.1.6527.3.1.2.91.49.1.1
The value of vRtrLdpNgPolRowLastCh indicates the timestamp when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgPolImportPolicy1 1.3.6.1.4.1.6527.3.1.2.91.49.1.2
The value of vRtrLdpNgPolImportPolicy1 specifies the first import policy used to filter LDP label bindings received from LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolImportPolicy2 1.3.6.1.4.1.6527.3.1.2.91.49.1.3
The value of vRtrLdpNgPolImportPolicy2 specifies the second import policy used to filter LDP label bindings received from LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolImportPolicy3 1.3.6.1.4.1.6527.3.1.2.91.49.1.4
The value of vRtrLdpNgPolImportPolicy3 specifies the third import policy used to filter LDP label bindings received from LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolImportPolicy4 1.3.6.1.4.1.6527.3.1.2.91.49.1.5
The value of vRtrLdpNgPolImportPolicy4 specifies the fourth import policy used to filter LDP label bindings received from LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolImportPolicy5 1.3.6.1.4.1.6527.3.1.2.91.49.1.6
The value of vRtrLdpNgPolImportPolicy5 specifies the fifth import policy used to filter LDP label bindings received from LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolExportPolicy1 1.3.6.1.4.1.6527.3.1.2.91.49.1.7
The value of vRtrLdpNgPolExportPolicy1 specifies the first export policy used to filter LDP label bindings advertised to LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolExportPolicy2 1.3.6.1.4.1.6527.3.1.2.91.49.1.8
The value of vRtrLdpNgPolExportPolicy2 specifies the second export policy used to filter LDP label bindings advertised to LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolExportPolicy3 1.3.6.1.4.1.6527.3.1.2.91.49.1.9
The value of vRtrLdpNgPolExportPolicy3 specifies the third export policy used to filter LDP label bindings advertised to LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolExportPolicy4 1.3.6.1.4.1.6527.3.1.2.91.49.1.10
The value of vRtrLdpNgPolExportPolicy4 specifies the fourth export policy used to filter LDP label bindings advertised to LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolExportPolicy5 1.3.6.1.4.1.6527.3.1.2.91.49.1.11
The value of vRtrLdpNgPolExportPolicy5 specifies the fifth export policy used to filter LDP label bindings advertised to LDP peers.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolTunlTblExportPolicy1 1.3.6.1.4.1.6527.3.1.2.91.49.1.12
The value of vRtrLdpNgPolTunlTblExportPolicy1 specifies the first tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolTunlTblExportPolicy2 1.3.6.1.4.1.6527.3.1.2.91.49.1.13
The value of vRtrLdpNgPolTunlTblExportPolicy2 specifies the second tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolTunlTblExportPolicy3 1.3.6.1.4.1.6527.3.1.2.91.49.1.14
The value of vRtrLdpNgPolTunlTblExportPolicy3 specifies the third tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolTunlTblExportPolicy4 1.3.6.1.4.1.6527.3.1.2.91.49.1.15
The value of vRtrLdpNgPolTunlTblExportPolicy4 specifies the fourth tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgPolTunlTblExportPolicy5 1.3.6.1.4.1.6527.3.1.2.91.49.1.16
The value of vRtrLdpNgPolTunlTblExportPolicy5 specifies the fifth tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgIfParamsTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.50
The value of vRtrLdpNgIfParamsTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgIfParamsTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgIfParamsTable 1.3.6.1.4.1.6527.3.1.2.91.51
vRtrLdpNgIfParamsTable keeps information applicable to the interfaces in LDP. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgIfParamsTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgIfParamsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgIfParamsEntry

vRtrLdpNgIfParamsEntry 1.3.6.1.4.1.6527.3.1.2.91.51.1
A row in this table represents information applicable to the interfaces in LDP.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgIfParamsEntry  

vRtrLdpNgIfParamRowLastCh 1.3.6.1.4.1.6527.3.1.2.91.51.1.1
The value of vRtrLdpNgIfParamRowLastCh indicates the timestamp when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgIfParamIPv4KAFactor 1.3.6.1.4.1.6527.3.1.2.91.51.1.2
The value of vRtrLdpNgIfParamIPv4KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgIfParamKeepAliveTimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to LDP IPv4 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpKeepAliveFactor  

vRtrLdpNgIfParamIPv6KAFactor 1.3.6.1.4.1.6527.3.1.2.91.51.1.3
The value of vRtrLdpNgIfParamIPv6KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgIfParamKeepAliveTimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to LDP IPv6 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpKeepAliveFactor  

vRtrLdpNgIfParamIPv4KATimeout 1.3.6.1.4.1.6527.3.1.2.91.51.1.4
The value of vRtrLdpNgIfParamIPv4KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgIfParamIPv4KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to LDP IPv4 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgIfParamIPv6KATimeout 1.3.6.1.4.1.6527.3.1.2.91.51.1.5
The value of vRtrLdpNgIfParamIPv6KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgIfParamIPv6KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to LDP IPv6 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgIfParamIPv4HelloFactor 1.3.6.1.4.1.6527.3.1.2.91.51.1.6
The value of vRtrLdpNgIfParamIPv4HelloFactor specifies the value by which the hello timeout (vRtrLdpNgIfParamIPv4HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to LDP IPv4 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpHelloFactor  

vRtrLdpNgIfParamIPv6HelloFactor 1.3.6.1.4.1.6527.3.1.2.91.51.1.7
The value of vRtrLdpNgIfParamIPv6HelloFactor specifies the value by which the hello timeout (vRtrLdpNgIfParamIPv6HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to LDP IPv6 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpHelloFactor  

vRtrLdpNgIfParamIPv4HelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.51.1.8
The value of vRtrLdpNgIfParamIPv4HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to LDP IPv4 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout  

vRtrLdpNgIfParamIPv6HelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.51.1.9
The value of vRtrLdpNgIfParamIPv6HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to LDP IPv6 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout  

vRtrLdpNgIfParamIPv4TransAddrTyp 1.3.6.1.4.1.6527.3.1.2.91.51.1.10
The value of vRtrLdpNgIfParamIPv4TransAddrTyp specifies the source of the transport address to be used when setting up the LDP TCP sessions. The transport address can be configured globally (applied to all interfaces) or per interface. When the value of this object is 'interface', the interface's IP address is used to setup the LDP session between neighbors. If multiple interfaces exist between two neighbors, the 'interface' mode cannot be used since only one LDP session is actually set up between the two neighbors. When the value of this object is 'system', the system's IP address is used to set up the LDP session between neighbors. This value is only applicable to LDP IPv4 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER interface(1), system(2)  

vRtrLdpNgIfParamIPv6TransAddrTyp 1.3.6.1.4.1.6527.3.1.2.91.51.1.11
The value of vRtrLdpNgIfParamIPv6TransAddrTyp specifies the source of the transport address to be used when setting up the LDP TCP sessions. The transport address can be configured globally (applied to all interfaces) or per interface. When the value of this object is 'interface', the interface's IP address is used to setup the LDP session between neighbors. If multiple interfaces exist between two neighbors, the 'interface' mode cannot be used since only one LDP session is actually set up between the two neighbors. When the value of this object is 'system', the system's IP address is used to set up the LDP session between neighbors. This value is only applicable to LDP IPv6 interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER interface(1), system(2)  

vRtrLdpNgTargTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.52
The value of vRtrLdpNgTargTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgTargTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgTargTable 1.3.6.1.4.1.6527.3.1.2.91.53
vRtrLdpNgTargTable keeps information applicable to the LDP targeted peers. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgTargTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgTargTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgTargEntry

vRtrLdpNgTargEntry 1.3.6.1.4.1.6527.3.1.2.91.53.1
A row in this table represents information applicable to the LDP targeted peers in virtual router instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgTargEntry  

vRtrLdpNgTargRowLastCh 1.3.6.1.4.1.6527.3.1.2.91.53.1.1
The value of vRtrLdpNgTargRowLastCh indicates the timestamp when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgTargImportPolicy1 1.3.6.1.4.1.6527.3.1.2.91.53.1.2
The value of vRtrLdpNgTargImportPolicy1 specifies the import route policy to determine which routes are accepted from targeted LDP neighbors. A maximum of 5 policies can be specified. vRtrLdpNgTargImportPolicy1 specifies the first policy.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargImportPolicy2 1.3.6.1.4.1.6527.3.1.2.91.53.1.3
The value of vRtrLdpNgTargImportPolicy2 specifies the second import policy used to determine which routes are accepted from targeted LDP neighbors.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargImportPolicy3 1.3.6.1.4.1.6527.3.1.2.91.53.1.4
The value of vRtrLdpNgTargImportPolicy3 specifies the third import policy used to determine which routes are accepted from targeted LDP neighbors.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargImportPolicy4 1.3.6.1.4.1.6527.3.1.2.91.53.1.5
The value of vRtrLdpNgTargImportPolicy4 specifies the fourth import policy to determine which routes are accepted from targeted LDP neighbors.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargImportPolicy5 1.3.6.1.4.1.6527.3.1.2.91.53.1.6
The value of vRtrLdpNgTargImportPolicy5 specifies the fifth import policy used to determine which routes are accepted from targeted LDP neighbors.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargExportPolicy1 1.3.6.1.4.1.6527.3.1.2.91.53.1.7
The value of vRtrLdpNgTargExportPolicy1 specifies the export route policy used to determine which routes are exported to this targeted LDP session. A maximum of 5 policies can be specified. vRtrLdpNgTargExportPolicy1 specifies the first policy.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargExportPolicy2 1.3.6.1.4.1.6527.3.1.2.91.53.1.8
The value of vRtrLdpNgTargExportPolicy2 specifies the second export policy used to determine which routes are exported to this targeted LDP session
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargExportPolicy3 1.3.6.1.4.1.6527.3.1.2.91.53.1.9
The value of vRtrLdpNgTargExportPolicy3 specifies the third export policy used to determine which routes are exported to this targeted LDP session.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargExportPolicy4 1.3.6.1.4.1.6527.3.1.2.91.53.1.10
The value of vRtrLdpNgTargExportPolicy4 specifies the fourth export policy used to determine which routes are exported to this targeted LDP session.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargExportPolicy5 1.3.6.1.4.1.6527.3.1.2.91.53.1.11
The value of vRtrLdpNgTargExportPolicy5 specifies the fifth export policy used to determine which routes are exported to this targeted LDP session.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgTargTunnelPreference 1.3.6.1.4.1.6527.3.1.2.91.53.1.12
The value of vRtrLdpNgTargTunnelPreference indicates whether LDP over tunnel is preferred when link-level LDP bindings are also available. If this value is 'true', then LDP tunnels are preferred and if the value is 'false' then LDP over tunnel is preferred. By default LDP tunnels are preferred.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargetedSessions 1.3.6.1.4.1.6527.3.1.2.91.53.1.13
The value of vRtrLdpNgTargetedSessions specifies whether or not targeted sessions are allowed. Targeted sessions are LDP sessions between indirectly connected peers. The discovery messages for an indirect LDP session are addressed to the specified peer instead of to the multicast address. When this object has a value of 'true', targeted sessions are enabled. When its value is 'false', targeted sessions are disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargIPv4KAFactor 1.3.6.1.4.1.6527.3.1.2.91.53.1.14
The value of vRtrLdpNgTargIPv4KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgTargKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to IPv4 targeted LDP peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpKeepAliveFactor  

vRtrLdpNgTargIPv6KAFactor 1.3.6.1.4.1.6527.3.1.2.91.53.1.15
The value of vRtrLdpNgTargIPv6KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgTargKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to IPv6 targeted LDP peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpKeepAliveFactor  

vRtrLdpNgTargIPv4KATimeout 1.3.6.1.4.1.6527.3.1.2.91.53.1.16
The value of vRtrLdpNgTargIPv4KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgTargIPv4KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to IPv4 LDP targeted peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgTargIPv6KATimeout 1.3.6.1.4.1.6527.3.1.2.91.53.1.17
The value of vRtrLdpNgTargIPv6KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgTargIPv6KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to IPv6 LDP targeted peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewKeepAliveTimeout  

vRtrLdpNgTargIPv4HelloFactor 1.3.6.1.4.1.6527.3.1.2.91.53.1.18
The value of vRtrLdpNgTargIPv4HelloFactor specifies the value by which the hello timeout (vRtrLdpNgTargIPv4HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to IPv4 LDP targeted peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpHelloFactor  

vRtrLdpNgTargIPv6HelloFactor 1.3.6.1.4.1.6527.3.1.2.91.53.1.19
The value of vRtrLdpNgTargIPv6HelloFactor specifies the value by which the hello timeout (vRtrLdpNgTargIPv6HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to IPv6 LDP targeted peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpHelloFactor  

vRtrLdpNgTargIPv4HelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.53.1.20
The value of vRtrLdpNgTargIPv4HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to IPv4 LDP targeted peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout  

vRtrLdpNgTargIPv6HelloTimeout 1.3.6.1.4.1.6527.3.1.2.91.53.1.21
The value of vRtrLdpNgTargIPv6HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to IPv6 LDP targeted peer.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxLdpNewHelloTimeout  

vRtrLdpNgTargIPv4HelloReduction 1.3.6.1.4.1.6527.3.1.2.91.53.1.22
The value of vRtrLdpNgTargIPv4HelloReduction specifies whether hello reduction to this targeted peer is enabled or not. If enabled, the sender advertises further dampened vRtrLdpNgTargIPv4HelloTimeout, to the targeted peer after LDP session is established. The value of 'true' means targeted hello reduction is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargIPv6HelloReduction 1.3.6.1.4.1.6527.3.1.2.91.53.1.23
The value of vRtrLdpNgTargIPv6HelloReduction specifies whether hello reduction to this targeted peer is enabled or not. If enabled, the sender advertises further dampened vRtrLdpNgTargIPv6HelloTimeout, to the targeted peer after LDP session is established. The value of 'true' means targeted hello reduction is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgTargIPv4HelloReduceFctr 1.3.6.1.4.1.6527.3.1.2.91.53.1.24
The value of vRtrLdpNgTargIPv4HelloReduceFctr specifies the number of hello messages that are sent at consistent vRtrLdpNgTargIPv4HelloTimeout, before advertising further dampened vRtrLdpNgTargIPv4HelloTimeout. An 'inconsistentValue' error is returned if this object is set when vRtrLdpNgTargIPv4HelloReduction is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..20  

vRtrLdpNgTargIPv6HelloReduceFctr 1.3.6.1.4.1.6527.3.1.2.91.53.1.25
The value of vRtrLdpNgTargIPv6HelloReduceFctr specifies the number of hello messages that are sent at consistent vRtrLdpNgTargIPv6HelloTimeout, before advertising further dampened vRtrLdpNgTargIPv6HelloTimeout. An 'inconsistentValue' error is returned if this object is set when vRtrLdpNgTargIPv6HelloReduction is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..20  

vRtrLdpNgAggrPreMatchTableLstCh 1.3.6.1.4.1.6527.3.1.2.91.54
The value of vRtrLdpNgAggrPreMatchTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgAggrPreMatchTable was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgAggrPreMatchTable 1.3.6.1.4.1.6527.3.1.2.91.55
vRtrLdpNgAggrPreMatchTable keeps information about aggregate prefix match procedures. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgAggrPreMatchTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgAggrPreMatchTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpNgAggrPreMatchEntry

vRtrLdpNgAggrPreMatchEntry 1.3.6.1.4.1.6527.3.1.2.91.55.1
A row in this table represents information about the aggregate prefix match procedures.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpNgAggrPreMatchEntry  

vRtrLdpNgAggrPreMatchRowLastCh 1.3.6.1.4.1.6527.3.1.2.91.55.1.1
The value of vRtrLdpNgAggrPreMatchRowLastCh indicates the timestamp when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpNgAggrPreMatchEnabled 1.3.6.1.4.1.6527.3.1.2.91.55.1.2
The value of vRtrLdpNgAggrPreMatchEnabled specifies whether aggregate prefix match procedures are enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgAggrPreMatchExcPolicy1 1.3.6.1.4.1.6527.3.1.2.91.55.1.3
The value of vRtrLdpNgAggrPreMatchExcPolicy1 specifies the policy name containing the prefixes to be excluded from the aggregate prefix match procedures. A maximum of 5 policies can be specified. vRtrLdpNgAggrPreMatchExcPolicy1 specifies the first policy.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgAggrPreMatchExcPolicy2 1.3.6.1.4.1.6527.3.1.2.91.55.1.4
The value of vRtrLdpNgAggrPreMatchExcPolicy2 specifies the second policy name containing the prefixes to be excluded from the aggregate prefix match procedures.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgAggrPreMatchExcPolicy3 1.3.6.1.4.1.6527.3.1.2.91.55.1.5
The value of vRtrLdpNgAggrPreMatchExcPolicy3 specifies the third policy name containing the prefixes to be excluded from the aggregate prefix match procedures.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgAggrPreMatchExcPolicy4 1.3.6.1.4.1.6527.3.1.2.91.55.1.6
The value of vRtrLdpNgAggrPreMatchExcPolicy4 specifies the fourth policy name containing the prefixes to be excluded from the aggregate prefix match procedures.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgAggrPreMatchExcPolicy5 1.3.6.1.4.1.6527.3.1.2.91.55.1.7
The value of vRtrLdpNgAggrPreMatchExcPolicy5 specifies the fifth policy name containing the prefixes to be excluded from the aggregate prefix match procedures.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrLdpNgAggrPreMatchAdminState 1.3.6.1.4.1.6527.3.1.2.91.55.1.8
The value of vRtrLdpNgAggrPreMatchAdminState specifies whether the aggregate prefix procedures will be used by LDP.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

vLdpNgAddrActiveFecTable 1.3.6.1.4.1.6527.3.1.2.91.57
vLdpNgAddrActiveFecTable is a read-only table that represents all active in data plane address FECs either sent to or received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgAddrActiveFecEntry

vLdpNgAddrActiveFecEntry 1.3.6.1.4.1.6527.3.1.2.91.57.1
Each row entry represents an instance of an active in data plane address FEC sent to or received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgAddrActiveFecEntry  

vLdpNgAddrActiveFecOpType 1.3.6.1.4.1.6527.3.1.2.91.57.1.1
The value of vLdpNgAddrActiveFecOpType indicates operation type of this FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER pop(1), push(2), swap(3)  

vLdpNgAddrActiveFecFecFlags 1.3.6.1.4.1.6527.3.1.2.91.57.1.2
The bit flags of vLdpNgAddrActiveFecFecFlags indicates the characteristics of the FEC.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLdpFECFlags  

vLdpNgAddrActiveFecNumInLbls 1.3.6.1.4.1.6527.3.1.2.91.57.1.3
The value of vLdpNgAddrActiveFecNumInLbls indicates the number of labels that have been sent to the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecNumOutLbls 1.3.6.1.4.1.6527.3.1.2.91.57.1.4
The value of vLdpNgAddrActiveFecNumOutLbls indicates the number of labels that have been received from the peer associated with this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecInLblTable 1.3.6.1.4.1.6527.3.1.2.91.58
vLdpNgAddrActiveFecInLblTable is a read-only table that represents all active in data plane address FECs received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgAddrActiveFecInLblEntry

vLdpNgAddrActiveFecInLblEntry 1.3.6.1.4.1.6527.3.1.2.91.58.1
Each row entry represents an instance of an active in data plane address FEC received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgAddrActiveFecInLblEntry  

vLdpNgAddrActiveFecInLblId 1.3.6.1.4.1.6527.3.1.2.91.58.1.1
The value of vLdpNgAddrActiveFecInLblId indicates the label number of the ingress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecInLbl 1.3.6.1.4.1.6527.3.1.2.91.58.1.2
The value of vLdpNgAddrActiveFecInLbl indicates the ingress label exchanged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecInLblIfIndex 1.3.6.1.4.1.6527.3.1.2.91.58.1.3
The value of vLdpNgAddrActiveFecInLblIfIndex indicates the interface index for ingress label.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vLdpNgAddrActiveFecOutLblTable 1.3.6.1.4.1.6527.3.1.2.91.59
vLdpNgAddrActiveFecOutLblTable is a read-only table that represents all active in data plane address FECs received from an LDP peer known to the Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLdpNgAddrActiveFecOutLblEntry

vLdpNgAddrActiveFecOutLblEntry 1.3.6.1.4.1.6527.3.1.2.91.59.1
Each row entry represents an instance of an active in data plane address FEC received from an LDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  VLdpNgAddrActiveFecOutLblEntry  

vLdpNgAddrActiveFecOutLblId 1.3.6.1.4.1.6527.3.1.2.91.59.1.1
The value of vLdpNgAddrActiveFecOutLblId indicates the label number of the egress label exchanged.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecOutLbl 1.3.6.1.4.1.6527.3.1.2.91.59.1.2
The value of vLdpNgAddrActiveFecOutLbl indicates the egress label exchanged
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecOutLblStatus 1.3.6.1.4.1.6527.3.1.2.91.59.1.3
The value of vLdpNgAddrActiveFecOutLblStatus indicates the status of the egress label.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLabelStatus  

vLdpNgAddrActiveFecOutLblIfIdx 1.3.6.1.4.1.6527.3.1.2.91.59.1.4
The value of vLdpNgAddrActiveFecOutLblIfIdx indicates the interface index for egress label.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vLdpNgAddrActiveFecOutLblNHType 1.3.6.1.4.1.6527.3.1.2.91.59.1.5
The value of vLdpNgAddrActiveFecOutLblNHType indicates the address type of vLdpNgAddrActiveFecOutLblNHAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vLdpNgAddrActiveFecOutLblNHAddr 1.3.6.1.4.1.6527.3.1.2.91.59.1.6
The value of vLdpNgAddrActiveFecOutLblNHAddr indicates the IP address of the next hop for egress label.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16)  

vLdpNgAddrActiveFecOutLblMetric 1.3.6.1.4.1.6527.3.1.2.91.59.1.7
The value of vLdpNgAddrActiveFecOutLblMetric indicates the relative cost of the tunnel represented by this address FEC egress label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecOutLblMtu 1.3.6.1.4.1.6527.3.1.2.91.59.1.8
The value of vLdpNgAddrActiveFecOutLblMtu indicates the maximum transfer unit for payloads represented by this address FEC egress label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecOutLblLspId 1.3.6.1.4.1.6527.3.1.2.91.59.1.9
The value of vLdpNgAddrActiveFecOutLblLspId indicates the LSP id associated with egress label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vLdpNgAddrActiveFecOutLblCBF 1.3.6.1.4.1.6527.3.1.2.91.59.1.10
The value of vLdpNgAddrActiveFecOutLblCBF indicates (if vRtrLdpNgAddrFecOutLblLspId is non-zero) the forwarding classes installed for the RSVP tunnel used by LDP in LDP over RSVP associated with egress label. If bit is set to 8, it indicates if the LSP for the RSVP tunnel used by LDP in LDP over RSVP associated with egress label is used as the class-based-forwarding default.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCBFClasses  

tmnxLdpNgNotificationObjects 1.3.6.1.4.1.6527.3.1.2.91.56
OBJECT IDENTIFIER    

vRtrLdpNgSessOperThresLevel 1.3.6.1.4.1.6527.3.1.2.91.56.1
The value of vRtrLdpNgSessOperThresLevel indicates whether the number of fec-bindings has exceeded or is below the configured fec threshold.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER up(0), down(1)  

vRtrLdpNgInstNotifyReasonCode 1.3.6.1.4.1.6527.3.1.2.91.56.2
The value of vRtrLdpNgInstNotifyReasonCode indicates the reason for the LDP instance state change.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER adminUp(1), adminDown(2), operUp(3), operDown(4)  

vRtrLdpNgSessOverloadState 1.3.6.1.4.1.6527.3.1.2.91.56.3
The value of vRtrLdpNgSessOverloadState indicates if session is overload or not.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

vRtrLdpNgSessOverloadDirection 1.3.6.1.4.1.6527.3.1.2.91.56.4
The value of vRtrLdpNgSessOverloadDirection indicates if the LDP Overload Notification message is sent to or received from the peer.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER sent(1), received(2)  

vRtrLdpNgSessOverloadFecType 1.3.6.1.4.1.6527.3.1.2.91.56.5
The value of vRtrLdpNgSessOverloadFecType indicates the overloaded FEC type.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER prefixes(1), p2mp(2), svcFec128(3), svcFec129(4)  

vRtrLdpNgSessOvldFecTypeSubTyp 1.3.6.1.4.1.6527.3.1.2.91.56.6
The value of vRtrLdpNgSessOvldFecTypeSubTyp indicates the sub type for overloaded FEC type.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), allVcType(3)  

vRtrLdpNgIpv4InstStateChange 1.3.6.1.4.1.6527.3.1.3.91.0.1
[CAUSE] The vRtrLdpNgIpv4InstStateChange is generated when the IPv4 LDP instance changes state operationally as specified by vRtrLdpNgGenIPv4OperState. [EFFECT] Based on the vRtrLdpNgGenIPv4OperDownReason reason code, the system may not be able to accept new requests from peers. [RECOVERY] Based on the vRtrLdpNgGenIPv4OperDownReason reason code, appropriate configuration changes in LDP may be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgIpv6InstStateChange 1.3.6.1.4.1.6527.3.1.3.91.0.2
[CAUSE] The vRtrLdpNgIpv6InstStateChange is generated when the IPv6 LDP instance changes state operationally as specified by vRtrLdpNgGenIPv6OperState. [EFFECT] Based on the vRtrLdpNgGenIPv6OperDownReason reason code, the system may not be able to accept new requests from peers. [RECOVERY] Based on the vRtrLdpNgGenIPv6OperDownReason reason code, appropriate configuration changes in LDP may be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgIfStateChange 1.3.6.1.4.1.6527.3.1.3.91.0.3
[CAUSE] The vRtrLdpNgIfStateChange notification is generated when the LDP interface changes state either administratively or operationally. [EFFECT] Based on the vRtrLdpNgIfOperDownReason reason code, the system may not be able to accept new requests from peers over this interface. [RECOVERY] Based on the vRtrLdpNgIfOperDownReason reason code, appropriate configuration changes in LDP may be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgInetIfStateChange 1.3.6.1.4.1.6527.3.1.3.91.0.4
[CAUSE] The vRtrLdpNgInetIfStateChange notification is generated when the LDP sub-interface changes state either administratively or operationally. [EFFECT] Based on the vRtrLdpNgInetIfOperDownReason reason code, the system may not be able to accept new requests over this interface. [RECOVERY] Based on the vRtrLdpNgInetIfOperDownReason reason code, appropriate configuration changes in LDP may be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgTargPeerStateChange 1.3.6.1.4.1.6527.3.1.3.91.0.5
[CAUSE] The vRtrLdpNgTargPeerStateChange notification is generated when the LDP peer changes state either administratively or operationally. [EFFECT] Based on the vRtrLdpNgTargPeerOperDownReason reason code, the system may not be able to accept new requests from this peer. [RECOVERY] Based on the vRtrLdpNgTargPeerOperDownReason reason code, appropriate configuration changes in LDP may be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgSessionStateChange 1.3.6.1.4.1.6527.3.1.3.91.0.6
[CAUSE] The vRtrLdpNgSessionStateChange notification is generated when the LDP Overload Notification message is sent to or received from the peer vRtrLdpNgPeerLdpId for the combination of vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp while vRtrLdpNgSessState remains 'operational'. [EFFECT] Once the Local LSR has sent the LDP Overload Notification message to the peer vRtrLdpNgPeerLdpId for fec and sub type fec indicated by vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp and vRtrLdpNgSessOverloadState has the value of 'true', then new Label Mapping Messages received for this peer for the given combination of fec and sub type fec is returned with a Label Release Message. If the Local LSR has received an LDP Overload Notification message from the peer vRtrLdpNgPeerLdpId for fec and sub type fec indicated by vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp and vRtrLdpNgSessOverloadState has the value of 'true', no new Label Mapping Message for the given combination of fec and sub type fec will be sent to this peer. If the Local LSR has received an LDP Overload Notification message from the peer vRtrLdpNgPeerLdpId for fec and sub type fec indicated by vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp and vRtrLdpNgSessOverloadState has the value of 'false', then the Local LSR will send all pending and any new Label Mapping Message for the given combination of fec and sub type fec to this peer. [RECOVERY] In case the Local LSR sent the LDP Overload Notification message to the peer vRtrLdpNgPeerLdpId and vRtrLdpNgSessOverloadState has the value of 'true' for fec and sub type fec indicated by vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp, then appropriate LDP configuration changes may be required on the Local and/or Remote LSR. Once the Local LSR is not overloaded anymore, an LDP Overload Notification message is sent to the peer vRtrLdpNgPeerLdpId and vRtrLdpNgSessOverloadState has the value of 'false' for given fec and sub type fec.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgSessMaxFecThresChanged 1.3.6.1.4.1.6527.3.1.3.91.0.7
[CAUSE] A vRtrLdpNgSessMaxFecThresChanged notification is generated when the number of FECs accepted from the peer has exceeded or drops below vRtrLdpNgSessOperMaxFecThreshold percent of the value specified by vRtrLdpNgSessParamMaxFec. New notification will not be generated if multiple internal event change occurs for the same level indicated by vRtrLdpNgSessOperThresLevel during a 2 minute interval. If any parameter in FEC limit configuration changes then we would always raise this trap if current number of FEC's are above the configured threshold or has crossed the threshold downwards. If we remain on or below the configured threshold before and after the configuration changes then no trap would be generated. [EFFECT] No direct effect but if the peer LSR continues to send further Label Mapping Message, then the number of FECs may exceed the configured maximum (vRtrLdpNgSessParamMaxFec) resulting in the generation of vRtrLdpNgSessMaxFecLimitReached notification. [RECOVERY] Appropriate Configuration changes in local or peer LSR will be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgSessMaxFecLimitReached 1.3.6.1.4.1.6527.3.1.3.91.0.8
[CAUSE] A vRtrLdpNgSessMaxFecLimitReached notification is generated when the number of FEC's accepted from the peer has reached the value specified by vRtrLdpNgSessParamMaxFec. If the current number of FEC's go below the limit but higher than the configured threshold and again start to increase and hit the limit a second time, we will raise a trap if 2 or more minutes have elapsed since the first vRtrLdpNgSessMaxFecLimitReached trap was sent. If any parameter in FEC limit configuration changes and the current number of FEC's are equal to or higher than the limit specified by vRtrLdpPeerMaxFec, then we would always raise the vRtrLdpNgSessMaxFecLimitReached trap. [EFFECT] When the number of FECs exceed the configured maximum (vRtrLdpNgSessParamMaxFec) it results in any of the following: (1) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'false' and LSR Overload Capability is supported, then Overload procedure will take place. (2) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'false' and LSR Overload Capability is not supported, Label Mapping Message will be returned with Label Release Message. (3) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'true', no action will be taken. [RECOVERY] Appropriate Configuration changes in local or peer LSR will be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

vRtrLdpNgResourceExhaustion 1.3.6.1.4.1.6527.3.1.3.91.0.9
[CAUSE] The vRtrLdpNgResourceExhaustion notification is generated when a CPM or data path resource required for FEC resolution is exhausted. The new notification will not be generated if multiple internal event changes occur within a 10 minute interval. [EFFECT] The system may not be able to accept new requests from peers. [RECOVERY] Appropriate configuration changes in LDP may be required.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxLdpNgV12v0Compliance 1.3.6.1.4.1.6527.3.1.1.91.1.1
The compliance statement for management of extended LDP on Nokia SROS series systems 12.0 release.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxLdpNgV13v0Compliance 1.3.6.1.4.1.6527.3.1.1.91.1.2
The compliance statement for management of extended LDP on Nokia SROS series systems 13.0 release.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxLdpNgV14v0Compliance 1.3.6.1.4.1.6527.3.1.1.91.1.3
The compliance statement for management of extended LDP on Nokia SROS series systems 14.0 release.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxLdpNgIfV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.1
The group of objects supporting general management of extended LDP interfaces on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgAdjV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.2
The group of objects supporting management of extended LDP Adjacencies for LDP sessions on Nokia SROS series systems 12.0 Release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgSessionV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.3
The group of objects supporting management of extended LDP Sessions on Nokia SROS series systems 12.0 Release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgSessionStatsV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.4
The group of objects supporting management of extended LDP Session statistics on Nokia SROS series systems 12.0 Release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgPeerParamsV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.5
The group of objects supporting management of extended LDP interfaces and targeted peers on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgAddrFecV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.6
The group of objects supporting Address FEC's on Nokia SROS series systems 12.0 Release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgP2MPFecV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.7
The group of objects supporting P2MP FEC's on Nokia SROS series systems 12.0 Release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgServFecV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.8
The group of objects supporting management of extended LDP service FECs sent to or received from an LDP peer on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgFec129V12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.9
The group of objects supporting management of LDP FEC-129s sent to or received from an LDP peer on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgCepTdmFecV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.10
The group of objects supporting management of extended LDP CEP/TDM FECs sent to or received from an LDP peer on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgStaticFecV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.11
The group of objects supporting management of LDP Static FECs on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgTargPeerV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.14
The group of objects supporting management of extended LDP targetted peer on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgInetIfV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.15
The group of objects supporting management of extended LDP Inet family interfaces on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgStatsV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.16
The group of objects supporting management of extended LDP statistics on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgCapabilityV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.17
The group of objects supporting management of extended LDP capabilities on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgTcpSessParamsV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.18
The group of objects supporting management of extended LDP TCP session parameters on Nokia SROS series systems release 12.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgGeneralV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.19
The group of objects supporting general management of extended LDP on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgPolicyV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.20
The group of objects supporting policies of extended LDP protocol on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgIfParamsV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.21
The group of objects supporting interface parameters of extended LDP on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgTargetedPeerV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.22
The group of objects supporting Targeted Peers of extended LDP on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgAggrPreMatchV12v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.23
The group of objects supporting Aggregate Prefix Match policies of extended LDP on Nokia SROS series systems 12.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgFecLimPerPeerV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.24
The group of notifications supporting LSR FEC limit per LDP peer feature on Nokia SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgNotificationGroup 1.3.6.1.4.1.6527.3.1.1.91.2.25
The group of notifications supporting LSR FEC limit per LDP peer feature on Nokia SROS series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxLdpNgSessParamPeerV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.26
The group of objects supporting management of extended LDP interfaces and targeted peers on Nokia SROS series systems 13.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgTcpSessParamsV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.27
The group of objects supporting management of extended LDP TCP session parameters on Nokia SROS series systems release 13.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgNotifyObjs 1.3.6.1.4.1.6527.3.1.1.91.2.28
The group of objects supporting LDP fec-limit notification on Nokia SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgHelloAdjV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.29
The group of objects supporting management of extended LDP Hello Adjacencies on Nokia SROS series systems release 13.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgTargPeerV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.30
The group of objects supporting management of extended LDP targetted peer on Nokia SROS series systems release 13.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgInetIfV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.31
The group of objects supporting management of extended LDP Inet family interfaces on Nokia SROS series systems release 13.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgAddrActiveFecV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.32
The group of objects supporting Active Address FEC's on Nokia SROS series systems 13.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgGeneralV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.33
The group of objects supporting general management of extended LDP on Nokia SROS series systems 13.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgRecvFecCapV13v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.34
The group of objects supporting Active Address FEC's on Nokia SROS series systems 13.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgGeneralEliV14v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.35
The group of objects supporting general management of extended LDP on Nokia SROS series systems 14.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgTargPeerV14v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.36
The group of objects supporting management of extended LDP targetted peer on Nokia SROS series systems release 14.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgIfV14v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.37
The group of objects supporting general management of extended LDP interfaces on Nokia SROS series systems 14.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgGeneralFrrV14v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.38
The group of objects supporting general management of extended LDP fast re-route on Nokia SROS series systems 14.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgSessV14v0Group 1.3.6.1.4.1.6527.3.1.1.91.2.40
The group of objects supporting general management of End of Label Information Base Notifications on Nokia SROS series systems 14.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxLdpNgLegacyInteropGrp 1.3.6.1.4.1.6527.3.1.1.91.2.41
The group of objects supporting general management of interoperability with legacy IPv4 LSR implementations on Nokia SROS series systems 14.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP