TAVVE-MIB

File: TAVVE-MIB.mib (62098 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC1286-MIB
RFC-1215 RFC-1212

Imported symbols

enterprises IpAddress Counter
TimeTicks DisplayString MacAddress
TRAP-TYPE OBJECT-TYPE

Defined Values

tavve 1.3.6.1.4.1.2668
OBJECT IDENTIFIER    

traps 1.3.6.1.4.1.2668.1
OBJECT IDENTIFIER    

agents 1.3.6.1.4.1.2668.2
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.2668.1.1
OBJECT IDENTIFIER    

custom 1.3.6.1.4.1.2668.1.2
OBJECT IDENTIFIER    

eventWatch 1.3.6.1.4.1.2668.1.1.1
OBJECT IDENTIFIER    

tcpdmon 1.3.6.1.4.1.2668.1.1.2
OBJECT IDENTIFIER    

ciscotrap 1.3.6.1.4.1.2668.1.1.3
OBJECT IDENTIFIER    

wwwmon 1.3.6.1.4.1.2668.1.1.4
OBJECT IDENTIFIER    

agentmon 1.3.6.1.4.1.2668.1.1.5
OBJECT IDENTIFIER    

remote 1.3.6.1.4.1.2668.1.1.6
OBJECT IDENTIFIER    

global 1.3.6.1.4.1.2668.1.1.7
OBJECT IDENTIFIER    

portmon 1.3.6.1.4.1.2668.1.1.8
OBJECT IDENTIFIER    

syslogtrap 1.3.6.1.4.1.2668.1.1.9
OBJECT IDENTIFIER    

atmmon 1.3.6.1.4.1.2668.1.1.10
OBJECT IDENTIFIER    

xmon 1.3.6.1.4.1.2668.1.1.12
OBJECT IDENTIFIER    

tscEwSourceNode 1.3.6.1.4.1.2668.1.1.1.1
The address of the node that was originally reported down.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwFaultAddr 1.3.6.1.4.1.2668.1.1.1.2
The IP address of the node that was is the root cause.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwFaultTimes 1.3.6.1.4.1.2668.1.1.1.3
A string with two time stamps in it: 1) the current time 2) the time the original failure was reported The time is printed in Unix time (seconds since Jan 1, 1970).
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwSourceAddr 1.3.6.1.4.1.2668.1.1.1.6
The address of the node being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwGroupName 1.3.6.1.4.1.2668.1.1.1.7
The group name (as defined to EventWatch to which this node belongs.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwSourceName 1.3.6.1.4.1.2668.1.1.1.8
The name of the node being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwSourceProtocol 1.3.6.1.4.1.2668.1.1.1.9
The protocol of the node being reported, e.g. IP.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwFaultName 1.3.6.1.4.1.2668.1.1.1.10
The name of the fault being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwFaultProtocol 1.3.6.1.4.1.2668.1.1.1.11
The protocol of the fault being reported, e.g. IP.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwUserThreshold 1.3.6.1.4.1.2668.1.1.1.12
The value of the user defined threshold.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscEwSlaValue 1.3.6.1.4.1.2668.1.1.1.13
The value of the group availability.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscEwReportHost 1.3.6.1.4.1.2668.1.1.1.14
The name of the EventWatch host reporting the problem. Make sure all the Remote box names are resolvable.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwDownTime 1.3.6.1.4.1.2668.1.1.1.15
The amount of time (in seconds) the device in question was down.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscEwEventTime 1.3.6.1.4.1.2668.1.1.1.16
The time (Unix time) when this event occurred.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscEwDescr 1.3.6.1.4.1.2668.1.1.1.17
The textual description of the entity.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscEwSourceDown 1
Device is verified down. This trap is sent after EventWatch verifies a device is down and it is not correlated to a problem in the network. This trap configured with source-down-trap. The bound variables contain the address of the fault, its name, and its protocol.
TRAP-TYPE    

tscEwInferredDown 2
Device is verified down. This trap is sent after EventWatch verifies a device is down and it is not correlated to a problem in the network. This trap configured with behind-down-trap.
TRAP-TYPE    

tscEwSourceUp 3
Device is back up. This trap complements trap 1 to report that the source node is back up. This trap configured with source-up-trap.
TRAP-TYPE    

tscEwInferredUp 4
Device is verified up. This trap complements trap 2 to report that the root cause node is back up. This trap configured with behind-up-trap.
TRAP-TYPE    

tscEwNodeDown 5
Device is verified down. This trap is issued when EventWatch is reporting the node down. Note this is the root cause node. This trap configured with level/trap.
TRAP-TYPE    

tscEwNodeUp 6
Device is back up after being verified down. This trap configured with level/trap.
TRAP-TYPE    

tscEwSlaThres 7
The availability of this group or host fell below the user configured threshold. This trap configured with level/trap.
TRAP-TYPE    

tscEwRemoteSourceDown 11
Device is verified down by Remote. This trap is sent after EventWatch on Remote verifies a device is down and it is not correlated to a problem in the network. This trap configured with source-down-trap. The bound variables contain the address of the fault, its name, and its protocol.
TRAP-TYPE    

tscEwRemoteInferredDown 12
Device is verified down by Remote. This trap is sent after EventWatch on Remote verifies a device is down and it is not correlated to a problem in the network. This trap configured with behind-down-trap.
TRAP-TYPE    

tscEwRemoteSourceUp 13
Device is back up, reported by Remote. This trap complements trap 1 to report that the source node is back up on Remote. This trap configured with source-up-trap.
TRAP-TYPE    

tscEwRemoteInferredUp 14
Device is verified up by Remote. This trap complements trap 2 to report that the root cause node is back up on Remote. This trap configured with behind-up-trap.
TRAP-TYPE    

tscEwRemoteNodeDown 15
Device is verified down by Remote. This trap is issued when EventWatch is reporting the node down. Note this is the root cause node. This trap configured with level/trap.
TRAP-TYPE    

tscEwRemoteNodeUp 16
Device is back up after being verified down by Remote. This trap configured with level/trap.
TRAP-TYPE    

tscEwTestTrap 91
EventWatch Test Notification. This trap is sent to EventWatch. It is used to verify that EventWatch can receive and send traps. This trap configured with test-trap. The bound variables contain the address of the device, its name, and its protocol.
TRAP-TYPE    

tscEwTestTrapRecv 92
EventWatch Test Notification. This trap is sent after EventWatch receives it. The status of the device reported is not actually verified. This trap configured with test-trap. The bound variables contain the address of the device, its name, and its protocol.
TRAP-TYPE    

tscTcpSourceNode 1.3.6.1.4.1.2668.1.1.2.1
The address of the node on which the TCP reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscTCPPortName 1.3.6.1.4.1.2668.1.1.2.2
The Service Name of this particular port.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscTCPPortNumber 1.3.6.1.4.1.2668.1.1.2.3
The Service Number of this particular port.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscTCPTime 1.3.6.1.4.1.2668.1.1.2.4
The time at which the event occurred.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscCtLogMessage 1.3.6.1.4.1.2668.1.1.3.1
The message from log file suitable for logging. Format is: month day, time : facility-severity-mnemonic: message
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscCtFacility 1.3.6.1.4.1.2668.1.1.3.2
The Cisco facility from log message, e.g. IP, PIX.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscCtSeverity 1.3.6.1.4.1.2668.1.1.3.3
The Cisco severity from log message, e.g. 0, 1, 2, 3, 4, 5, 6, 7, 8.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscCtMnemonic 1.3.6.1.4.1.2668.1.1.3.4
The Cisco Mnemonic from log message, e.g. DUPADDR.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscCtMessage 1.3.6.1.4.1.2668.1.1.3.5
The Cisco message from log message (stripped of time stamp, facility, severity, mnemonic
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscCtSeverity0 10
Cisco device reporting a severity 0 event.
TRAP-TYPE    

tscCtSeverity1 11
Cisco device reporting a severity 1 event.
TRAP-TYPE    

tscCtSeverity2 12
Cisco device reporting a severity 2 event.
TRAP-TYPE    

tscCtSeverity3 13
Cisco device reporting a severity 3 event.
TRAP-TYPE    

tscCtSeverity4 14
Cisco device reporting a severity 4 event.
TRAP-TYPE    

tscCtSeverity5 15
Cisco device reporting a severity 5 event.
TRAP-TYPE    

tscCtSeverity6 16
Cisco device reporting a severity 6 event.
TRAP-TYPE    

tscCtSeverity7 17
Cisco device reporting a severity 7 event.
TRAP-TYPE    

tscCtSeverity8 18
Cisco device reporting a severity 8 event.
TRAP-TYPE    

wwwmonServerName 1.3.6.1.4.1.2668.1.1.4.1
This is the web server's hostname
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

wwwmonServerPort 1.3.6.1.4.1.2668.1.1.4.2
This is the web server port number.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

wwwmonServerURL 1.3.6.1.4.1.2668.1.1.4.3
This is the URL passed to the web server
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

wwwmonServerStatus 1.3.6.1.4.1.2668.1.1.4.4
This is the web server's status for the HEAD request.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

wwwmonUp 101
Wwwmon reporting the status change to Up from a web page query.
TRAP-TYPE    

wwwmonTimeout 102
Wwwmon reporting the status change to Timeout from a web page query.
TRAP-TYPE    

wwwmonRefd 103
Wwwmon reporting the status change to Refused from a web page query.
TRAP-TYPE    

wwwmonUnknown 104
Wwwmon reporting the status change to Unknown from a web page query.
TRAP-TYPE    

wwwmonBusy 105
Wwwmon reporting the status change to Busy from a web page query.
TRAP-TYPE    

wwwmonInfo 106
Wwwmon reporting the status change to HTTP-Info from a web page query.
TRAP-TYPE    

wwwmonRedirect 107
Wwwmon reporting the status change to HTTP-Redirect from a web page query.
TRAP-TYPE    

wwwmonClient 108
Wwwmon reporting the status change to HTTP-Client-Err from a web page query.
TRAP-TYPE    

wwwmonServer 109
Wwwmon reporting the status change to HTTP-Server-Err from a web page query.
TRAP-TYPE    

tscRemoteSourceNode 1.3.6.1.4.1.2668.1.1.6.1
The hostname of the node being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteValue 1.3.6.1.4.1.2668.1.1.6.2
The value of a variable a thresold was set against.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscRemoteThreshold 1.3.6.1.4.1.2668.1.1.6.3
The value of a user-defined thresold.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscRemoteRearm 1.3.6.1.4.1.2668.1.1.6.4
The value of a user-defined rearm.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscRemoteSourceAddr 1.3.6.1.4.1.2668.1.1.6.5
The address of the node being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteName 1.3.6.1.4.1.2668.1.1.6.6
The hostname of this reporting system.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteSourceNode2 1.3.6.1.4.1.2668.1.1.6.7
Another hostname being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteSourceProtocol 1.3.6.1.4.1.2668.1.1.6.8
The network protocol of the node being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteProcName 1.3.6.1.4.1.2668.1.1.6.9
The eProbe process name being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteFsDevice 1.3.6.1.4.1.2668.1.1.6.10
The file system logical device.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteFsName 1.3.6.1.4.1.2668.1.1.6.11
The file system name (mount point).
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteIfIndex 1.3.6.1.4.1.2668.1.1.6.12
The relevant ifIndex.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteChassis 1.3.6.1.4.1.2668.1.1.6.13
The relevant chassis #.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteSlot 1.3.6.1.4.1.2668.1.1.6.14
The relevant slot #.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemotePosition 1.3.6.1.4.1.2668.1.1.6.15
The relevant port position #.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteDescription 1.3.6.1.4.1.2668.1.1.6.16
The relevant description.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteRecno 1.3.6.1.4.1.2668.1.1.6.17
The relevant database record number.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteOldValue 1.3.6.1.4.1.2668.1.1.6.18
The old value of a variable a thresold was set against.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscRemoteTrapOID 1.3.6.1.4.1.2668.1.1.6.19
The enterprise OID of trap being encapsulated.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteTrapGeneric 1.3.6.1.4.1.2668.1.1.6.20
The generic of trap being encapsulated.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteTrapSpecific 1.3.6.1.4.1.2668.1.1.6.21
The specific of trap being encapsulated.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteTrapTimestamp 1.3.6.1.4.1.2668.1.1.6.22
The timestamp of trap being encapsulated.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteTrapCommunity 1.3.6.1.4.1.2668.1.1.6.23
The community of trap being encapsulated.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteTimestamp 1.3.6.1.4.1.2668.1.1.6.24
A timestamp for this event.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscRemoteDomain 1.3.6.1.4.1.2668.1.1.6.25
An ePROBE domain for this event.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscIfDown 1
Interface is not reachable. This trap is sent after tpingd determines that an interface is no longer reachable. The bound variables contain the address of the device.
TRAP-TYPE    

tscIfUp 2
Interface is reachable. This trap is sent after tpingd determines that an interface is now reachable. The bound variables contain the address of the device.
TRAP-TYPE    

tscIfLatThreshold 3
A user-defined interface latency threshold was exceeded. This trap is sent after tpingd determines that a user-defined interface latency threshold was exceeded for this device. The bound variables contain the address of the device, the value of the interface latency, the value of the user-defined threshold.
TRAP-TYPE    

tscIfLatRearm 4
A user-defined interface latency threshold was rearmed. This trap is sent after tpingd determines that a user-defined interface latency threshold was rearmed for this device. The bound variables contain the address of the device, the value of the interface latency, the value of the user-defined rearm.
TRAP-TYPE    

tscIfUnknown 5
Interface status is unknown. This trap is sent after tpingd determines that an interface is no longer known. The bound variables contain the address of the device.
TRAP-TYPE    

tscNodeDown 6
Node is down. This trap is sent after ipmon determines that all interfaces on a node are down. The bound variables contain the address of the device.
TRAP-TYPE    

tscNodeMarginal 7
Node is marginal. This trap is sent after ipmon determines that some interfaces on the node are down and some interfaces on the node are up. The bound variables contain the address of the device.
TRAP-TYPE    

tscNodeUp 8
Node is up. This trap is sent after ipmon determines that all interfaces on a node are up. The bound variables contain the address of the device.
TRAP-TYPE    

tscNodeUnknown 9
Node is unknown. This trap is sent after ipmon determines that all interfaces on a node are unknown. The bound variables contain the address of the device.
TRAP-TYPE    

tscNewNode 10
A new node has been discovered by this system.
TRAP-TYPE    

tscNameChange 11
A node name has changed
TRAP-TYPE    

tscIfDelete 12
Interface is deleted This trap is sent after tpingd determines that an interface has been deleted. The bound variables contain the address of the device.
TRAP-TYPE    

tscNodeAdded 13
Node is added. This trap is sent when scannode determines that a node is new in the nodedb.
TRAP-TYPE    

tscInterfaceAdded 14
An interface on a node is added. This trap is sent when scannode determines that an interface is new in the ifdb.
TRAP-TYPE    

tscNodeDeleted 15
Node is deleted. This trap is sent when scannode determines that a node is removed from the nodedb.
TRAP-TYPE    

tscInterfaceDeleted 16
An interface on a node is removed. This trap is sent when scannode determines that an interface is removed from the ifdb.
TRAP-TYPE    

tscHostnameChanged 17
A hostname change has been detected. This trap is sent when scannode determines that a new hostname is being used for a formerly different named node.
TRAP-TYPE    

tscSysObjectIDChanged 18
The sysObjectID on the device changed. This trap is sent when scannode determines that a new sysObjectID was detected for a host.
TRAP-TYPE    

tscProcFail 21
A key eProbe process has failed.
TRAP-TYPE    

tscProcStop 22
A key eProbe process has stopped (deliberate).
TRAP-TYPE    

tscProcStart 23
A key eProbe process has started.
TRAP-TYPE    

tscFsFull 24
A file system is getting full. It has reached a particular level of capacity (%).
TRAP-TYPE    

tscVoidWarranty 25
The eProbe admin has elected for root access to the device and understands this voids the warranty.
TRAP-TYPE    

tscSysNameChanged 26
The sysName on the device changed. This trap is sent when scannode determines that a new sysName was detected for a host.
TRAP-TYPE    

tscSysDescrChanged 27
The sysDescr on the device changed. This trap is sent when scannode determines that a new sysDescr was detected for a host.
TRAP-TYPE    

tscSysLocationChanged 28
The sysLocation on the device changed. This trap is sent when scannode determines that a new sysLocation was detected for a host.
TRAP-TYPE    

tscSysContactChanged 29
The sysContact on the device changed. This trap is sent when scannode determines that a new sysContact was detected for a host.
TRAP-TYPE    

tscManage 50
A node is now managed. This trap is sent after tmanage switches the status of the node to managed. The bound variable contain the name of the device.
TRAP-TYPE    

tscUnmanage 51
A node is now unmanaged. This trap is sent after tunmanage switches the status of the node to unmanaged. The bound variable contain the name of the device.
TRAP-TYPE    

tscIfManage 52
An interface is now managed. This trap is sent after tmanage switches the status of the interface to managed. The bound variables contain the ifIndex, ifDescr.
TRAP-TYPE    

tscIfUnmanage 53
An interface is now unmanaged. This trap is sent after tunmanage switches the status of the interface to unmanaged. The bound variables contain the ifIndex, ifDescr.
TRAP-TYPE    

tscNetManage 54
A subnet is now managed. This trap is sent after tmanage switches the status of the subnet to managed.
TRAP-TYPE    

tscNetUnmanage 55
A subnet is now unmanaged. This trap is sent after tunmanage switches the status of the subnet to unmanaged.
TRAP-TYPE    

tscPortManage 56
An interface is now managed. This trap is sent after tmanage switches the status of the interface to managed. The bound variables contain the ifIndex, chassis, slot, and positon.
TRAP-TYPE    

tscPortUnmanage 57
An interface is now unmanaged. This trap is sent after tunmanage switches the status of the interface to unmanaged. The bound variables contain the ifIndex, chassis, slot, and positon.
TRAP-TYPE    

tscFwdTrap 60
Ensapsulate a trap within this trap. This trap is sent by ePROBE when forwarding traps with ensapsulation mode on. In particular, this makes sure forwarded traps do not have source agent IP address which messes up the NMS in duplicate IP environments. The bound variables contain the details of the oringal trap: agent IP address, agent hostname, enterprise OID, generic, specific, timestamp, community, log message, and variables.
TRAP-TYPE    

tscRedPeerAdd 61
Report a redundant peer has been added.
TRAP-TYPE    

tscRedPeerRm 62
Report a redundant peer has been removed.
TRAP-TYPE    

tscRedPeerUp 63
Report a redundant peer is now up.
TRAP-TYPE    

tscRedPeerUnavail 64
Report a redundant peer is now unavailable.
TRAP-TYPE    

tscRedPeerDown 65
Report a redundant peer is now down.
TRAP-TYPE    

tscRemoteNoStatus 68
ePROBE is inferred down because it has not reported in to NMS. This trap is sent by ePdaemon. This trap has bindings in alignment with remote source down trap
TRAP-TYPE    

tscRemoteAlive 69
ePROBE is inferred up because it has again reported in to NMS. This trap is sent by ePdaemon. This trap has bindings in alignment with remote source up trap
TRAP-TYPE    

tscPmOldValue 1.3.6.1.4.1.2668.1.1.8.1
The old value (before the change).
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscPmValue 1.3.6.1.4.1.2668.1.1.8.2
The (new) value (after the change).
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscPmIndex 1.3.6.1.4.1.2668.1.1.8.3
The ifIndex for the port being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscPmChassis 1.3.6.1.4.1.2668.1.1.8.4
The chassis # for the port being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscPmSlot 1.3.6.1.4.1.2668.1.1.8.5
The slot number inside chassis for the port being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscPmPos 1.3.6.1.4.1.2668.1.1.8.6
The port # or port position in slot for the port being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscPmStatus 1.3.6.1.4.1.2668.1.1.8.7
The (new) status of the port.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscPmName 1.3.6.1.4.1.2668.1.1.8.8
The user defined name of the port.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscPmTime 1.3.6.1.4.1.2668.1.1.8.9
The (Unix) time of the status change.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscPmNameChange 1
The port name has changed. This trap is sent after a port configuration check determined that the port name has changed.
TRAP-TYPE    

tscPmTypeChange 2
The port type has changed. This trap is sent after a port configuration check determined that the port type has changed.
TRAP-TYPE    

tscPmSpeedChange 3
The port speed has changed. This trap is sent after a port configuration check determined that the port speed has changed.
TRAP-TYPE    

tscPmDuplexChange 4
The port duplex has changed. This trap is sent after a port configuration check determined that the port duplex has changed.
TRAP-TYPE    

tscPmVlanChange 5
The port VLAN has changed. This trap is sent after a port configuration check determined that the port VLAN has changed.
TRAP-TYPE    

tscPmNewPort 100
A new port has been discovered. This trap is sent after a port configuration check determined that a new port is present
TRAP-TYPE    

tscPmPortFault 101
The status of a port has gone critical. This trap is sent after a port status check determined that the port is not functioning.
TRAP-TYPE    

tscPmPortRestored 102
The status of a port returned to normal. This trap is sent after a port status check determined that the port is functioning again.
TRAP-TYPE    

tscPmPortUnknown 103
The status of a port is now unknown. This trap is sent after a port status check determined that the port has entered an unknown state.
TRAP-TYPE    

tscPmPortDeleted 104
A port has been deleted from portdb. This trap is sent after a port status check determined that the port no longer exists.
TRAP-TYPE    

tscAtmmonSourceNode 1.3.6.1.4.1.2668.1.1.10.1
The hostname of the interface being reported.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscAtmmonIfIndex 1.3.6.1.4.1.2668.1.1.10.2
The relevant ifIndex.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscAtmmonifName 1.3.6.1.4.1.2668.1.1.10.3
The name of the interface being reported down.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscAtmIfDown 101
Interface is not reachable. This trap is sent after atmmon determines that an interface is no longer reachable. The bound variables contain the address of the device.
TRAP-TYPE    

tscAtmIfUp 102
Interface is reachable. This trap is sent after atmmon determines that an interface is reachable. The bound variables contain the address of the device.
TRAP-TYPE    

tscAtmIfUnknown 103
Interface is not reachable. This trap is sent after atmmon determines that an interface is no longer reachable. The bound variables contain the address of the device.
TRAP-TYPE    

tscSltLogMessage 1.3.6.1.4.1.2668.1.1.9.1
The message from log file suitable for logging. Format is: month day time host facility[pid]: message
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscSltFacility 1.3.6.1.4.1.2668.1.1.9.2
The facility from log message, e.g. snmpd, kernel.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscSltPid 1.3.6.1.4.1.2668.1.1.9.3
The process id of the facility or 0.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

tscSltHostname 1.3.6.1.4.1.2668.1.1.9.4
The hostname of the device reporting the message.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscSltMessage 1.3.6.1.4.1.2668.1.1.9.5
The message from log message (stripped of time stamp, facility, and hostname
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

tscSltTrap 1
Reporting a syslog event.
TRAP-TYPE