SYSAPPL-MIB
File:
SYSAPPL-MIB.mib (68098 bytes)
Imported modules
Imported symbols
Defined Types
| RunState |
|
| This TC describes the current execution state of
a running application or process. The possible
values are:
running(1),
runnable(2), - waiting for a resource (CPU, etc.)
waiting(3), - waiting for an event
exiting(4),
other(5) - other invalid state |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
running(1), runnable(2), waiting(3), exiting(4), other(5) |
|
| LongUtf8String |
|
| To facilitate internationalization, this TC
represents information taken from the ISO/IEC IS
10646-1 character set, encoded as an octet string
using the UTF-8 character encoding scheme described
in RFC 2044 [10]. For strings in 7-bit US-ASCII,
there is no impact since the UTF-8 representation
is identical to the US-ASCII encoding. |
| TEXTUAL-CONVENTION |
|
|
|
| |
OCTET STRING |
Size(0..1024) |
|
| Utf8String |
|
| To facilitate internationalization, this TC
represents information taken from the ISO/IEC IS
10646-1 character set, encoded as an octet string
using the UTF-8 character encoding scheme described
in RFC 2044 [10]. For strings in 7-bit US-ASCII,
there is no impact since the UTF-8 representation
is identical to the US-ASCII encoding. |
| TEXTUAL-CONVENTION |
|
|
|
| |
OCTET STRING |
Size(0..255) |
|
| SysApplInstallPkgEntry |
|
| SEQUENCE |
|
|
|
| |
sysApplInstallPkgIndex |
Unsigned32 |
|
| |
sysApplInstallPkgManufacturer |
Utf8String |
|
| |
sysApplInstallPkgProductName |
Utf8String |
|
| |
sysApplInstallPkgVersion |
Utf8String |
|
| |
sysApplInstallPkgSerialNumber |
Utf8String |
|
| |
sysApplInstallPkgDate |
DateAndTime |
|
| |
sysApplInstallPkgLocation |
LongUtf8String |
|
| SysApplInstallElmtEntry |
|
| SEQUENCE |
|
|
|
| |
sysApplInstallElmtIndex |
Unsigned32 |
|
| |
sysApplInstallElmtName |
Utf8String |
|
| |
sysApplInstallElmtType |
INTEGER |
|
| |
sysApplInstallElmtDate |
DateAndTime |
|
| |
sysApplInstallElmtPath |
LongUtf8String |
|
| |
sysApplInstallElmtSizeHigh |
Unsigned32 |
|
| |
sysApplInstallElmtSizeLow |
Unsigned32 |
|
| |
sysApplInstallElmtRole |
OCTET STRING |
|
| |
sysApplInstallElmtModifyDate |
DateAndTime |
|
| |
sysApplInstallElmtCurSizeHigh |
Unsigned32 |
|
| |
sysApplInstallElmtCurSizeLow |
Unsigned32 |
|
| SysApplRunEntry |
|
| SEQUENCE |
|
|
|
| |
sysApplRunIndex |
Unsigned32 |
|
| |
sysApplRunStarted |
DateAndTime |
|
| |
sysApplRunCurrentState |
RunState |
|
| SysApplPastRunEntry |
|
| SEQUENCE |
|
|
|
| |
sysApplPastRunIndex |
Unsigned32 |
|
| |
sysApplPastRunStarted |
DateAndTime |
|
| |
sysApplPastRunExitState |
INTEGER |
|
| |
sysApplPastRunTimeEnded |
DateAndTime |
|
| SysApplElmtRunEntry |
|
| SEQUENCE |
|
|
|
| |
sysApplElmtRunInstallPkg |
Unsigned32 |
|
| |
sysApplElmtRunInvocID |
Unsigned32 |
|
| |
sysApplElmtRunIndex |
Unsigned32 |
|
| |
sysApplElmtRunInstallID |
Unsigned32 |
|
| |
sysApplElmtRunTimeStarted |
DateAndTime |
|
| |
sysApplElmtRunState |
RunState |
|
| |
sysApplElmtRunName |
LongUtf8String |
|
| |
sysApplElmtRunParameters |
Utf8String |
|
| |
sysApplElmtRunCPU |
TimeTicks |
|
| |
sysApplElmtRunMemory |
Gauge32 |
|
| |
sysApplElmtRunNumFiles |
Gauge32 |
|
| |
sysApplElmtRunUser |
Utf8String |
|
| SysApplElmtPastRunEntry |
|
| SEQUENCE |
|
|
|
| |
sysApplElmtPastRunInvocID |
Unsigned32 |
|
| |
sysApplElmtPastRunIndex |
Unsigned32 |
|
| |
sysApplElmtPastRunInstallID |
Unsigned32 |
|
| |
sysApplElmtPastRunTimeStarted |
DateAndTime |
|
| |
sysApplElmtPastRunTimeEnded |
DateAndTime |
|
| |
sysApplElmtPastRunName |
LongUtf8String |
|
| |
sysApplElmtPastRunParameters |
Utf8String |
|
| |
sysApplElmtPastRunCPU |
TimeTicks |
|
| |
sysApplElmtPastRunMemory |
Unsigned32 |
|
| |
sysApplElmtPastRunNumFiles |
Unsigned32 |
|
| |
sysApplElmtPastRunUser |
Utf8String |
|
| SysApplMapEntry |
|
| SEQUENCE |
|
|
|
| |
sysApplMapInstallElmtIndex |
Unsigned32 |
|
| |
sysApplMapInstallPkgIndex |
Unsigned32 |
|
Defined Values
| sysApplMIB |
1.3.6.1.2.1.54 |
| The MIB module defines management objects that model
applications as collections of executables and files
installed and executing on a host system. The MIB
presents a system-level view of applications; i.e.,
objects in this MIB are limited to those attributes
that can typically be obtained from the system itself
without adding special instrumentation to the applications. |
| MODULE-IDENTITY |
|
|
|
| sysApplInstallPkgTable |
1.3.6.1.2.1.54.1.1.1 |
| The table listing the software application packages
installed on a host computer. In order to appear in
this table, it may be necessary for the application
to be installed using some type of software
installation mechanism or global registry so that its
existence can be detected by the agent implementation. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysApplInstallPkgEntry |
|
| sysApplInstallPkgEntry |
1.3.6.1.2.1.54.1.1.1.1 |
| The logical row describing an installed application
package. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysApplInstallPkgEntry |
|
|
| sysApplInstallPkgIndex |
1.3.6.1.2.1.54.1.1.1.1.1 |
| An integer used only for indexing purposes.
Generally monotonically increasing from 1 as new
applications are installed.
The value for each installed application must
remain constant at least from one re-initialization of
the network management entity which implements this
MIB module to the next re-initialization.
The specific value is meaningful only within a given SNMP
entity. A sysApplInstallPkgIndex value must not be re-used
until the next agent entity restart in the event the
installed application entry is deleted. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..ffffffff |
|
| sysApplInstallPkgVersion |
1.3.6.1.2.1.54.1.1.1.1.4 |
| The version number assigned to the application package
by the manufacturer of the software. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Utf8String |
|
|
| sysApplInstallPkgDate |
1.3.6.1.2.1.54.1.1.1.1.6 |
| The date and time this software application was installed
on the host. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| sysApplInstallPkgLocation |
1.3.6.1.2.1.54.1.1.1.1.7 |
| The complete path name where the application package
is installed. For example, the value would be
'/opt/MyapplDir' if the application package was installed
in the /opt/MyapplDir directory. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
LongUtf8String |
|
|
| sysApplInstallElmtTable |
1.3.6.1.2.1.54.1.1.2 |
| This table details the individual application package
elements (files and executables) which comprise the
applications defined in the sysApplInstallPkg Table.
Each entry in this table has an index to the
sysApplInstallPkg table to identify the application
package of which it is a part. As a result, there may
be many entries in this table for each instance in the
sysApplInstallPkg Table.
Table entries are indexed by sysApplInstallPkgIndex,
sysApplInstallElmtIndex to facilitate retrieval of
all elements associated with a particular installed
application package. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysApplInstallElmtEntry |
|
| sysApplInstallElmtEntry |
1.3.6.1.2.1.54.1.1.2.1 |
| The logical row describing an element of an installed
application. The element may be an executable or
non-executable file. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysApplInstallElmtEntry |
|
|
| sysApplInstallElmtIndex |
1.3.6.1.2.1.54.1.1.2.1.1 |
| An arbitrary integer used for indexing. The value
of this index is unique among all rows in this table
that exist or have existed since the last agent restart. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..ffffffff |
|
| sysApplInstallElmtName |
1.3.6.1.2.1.54.1.1.2.1.2 |
| The name of this element which is contained in the
application. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Utf8String |
|
|
| sysApplInstallElmtType |
1.3.6.1.2.1.54.1.1.2.1.3 |
| The type of element that is part of the installed
application. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), nonexecutable(2), operatingSystem(3), deviceDriver(4), application(5) |
|
| sysApplInstallElmtDate |
1.3.6.1.2.1.54.1.1.2.1.4 |
| The date and time that this component was installed on
the system. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| sysApplInstallElmtPath |
1.3.6.1.2.1.54.1.1.2.1.5 |
| The full directory path where this element is installed.
For example, the value would be '/opt/EMPuma/bin' for an
element installed in the directory '/opt/EMPuma/bin'.
Most application packages include information about the
elements contained in the package. In addition, elements
are typically installed in sub-directories under the
package installation directory. In cases where the
element path names are not included in the package
information itself, the path can usually be determined
by a simple search of the sub-directories. If the
element is not installed in that location and there is
no other information available to the agent implementation,
then the path is unknown and null is returned. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
LongUtf8String |
|
|
| sysApplInstallElmtSizeHigh |
1.3.6.1.2.1.54.1.1.2.1.6 |
| The installed file size in 2^32 byte blocks. This is
the size of the file on disk immediately after installation.
For example, for a file with a total size of 4,294,967,296
bytes, this variable would have a value of 1; for a file
with a total size of 4,294,967,295 bytes this variable
would be 0. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| sysApplInstallElmtSizeLow |
1.3.6.1.2.1.54.1.1.2.1.7 |
| The installed file size modulo 2^32 bytes. This is
the size of the file on disk immediately after installation.
For example, for a file with a total size of 4,294,967,296
bytes this variable would have a value of 0; for a file with
a total size of 4,294,967,295 bytes this variable would be
4,294,967,295. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| sysApplInstallElmtRole |
1.3.6.1.2.1.54.1.1.2.1.8 |
| An operator assigned value used in the determination of
application status. This value is used by the agent to
determine both the mapping of started processes to the
initiation of an application, as well as to allow for a
determination of application health. The default value,
unknown(5), is used when an operator has not yet assigned
one of the other values. If unknown(5) is set, bits
1 - 4 have no meaning. The possible values are:
executable(0),
An application may have one or
more executable elements. The rest of the
bits have no meaning if the element is not
executable.
exclusive(1),
Only one copy of an exclusive element may be
running per invocation of the running
application.
primary(2),
The primary executable. An application can
have one, and only one element that is designated
as the primary executable. The execution of
this element constitutes an invocation of
the application. This is used by the agent
implementation to determine the initiation of
an application. The primary executable must
remain running long enough for the agent
implementation to detect its presence.
required(3),
An application may have zero or more required
elements. All required elements must be running
in order for the application to be judged to be
running and healthy.
dependent(4),
An application may have zero or more
dependent elements. Dependent elements may
not be running unless required elements are.
unknown(5)
Default value for the case when an operator
has not yet assigned one of the other values.
When set, bits 1, 2, 3, and 4 have no meaning.
sysApplInstallElmtRole is used by the agent implementation
in determining the initiation of an application, the
current state of a running application (see
sysApplRunCurrentState), when an application invocation is
no longer running, and the exit status of a terminated
application invocation (see sysApplPastRunExitState). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| sysApplInstallElmtModifyDate |
1.3.6.1.2.1.54.1.1.2.1.9 |
| The date and time that this element was last modified.
Modification of the sysApplInstallElmtRole columnar
object does NOT constitute a modification of the element
itself and should not affect the value of this object. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| sysApplInstallElmtCurSizeHigh |
1.3.6.1.2.1.54.1.1.2.1.10 |
| The current file size in 2^32 byte blocks.
For example, for a file with a total size of 4,294,967,296
bytes, this variable would have a value of 1; for a file
with a total size of 4,294,967,295 bytes this variable
would be 0. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| sysApplInstallElmtCurSizeLow |
1.3.6.1.2.1.54.1.1.2.1.11 |
| The current file size modulo 2^32 bytes.
For example, for a file with a total size of 4,294,967,296
bytes this variable would have a value of 0; for a file with
a total size of 4,294,967,295 bytes this variable would be
4,294,967,295. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| sysApplRunTable |
1.3.6.1.2.1.54.1.2.1 |
| The table describes the applications which are executing
on the host. Each time an application is invoked,
an entry is created in this table. When an application ends,
the entry is removed from this table and a corresponding
entry is created in the SysApplPastRunTable.
A new entry is created in this table whenever the agent
implementation detects a new running process that is an
installed application element whose sysApplInstallElmtRole
designates it as being the application's primary executable
(sysApplInstallElmtRole = primary(2) ).
The table is indexed by sysApplInstallPkgIndex,
sysApplRunIndex to enable managers to easily locate all
invocations of a particular application package. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysApplRunEntry |
|
| sysApplRunEntry |
1.3.6.1.2.1.54.1.2.1.1 |
| The logical row describing an application which is
currently running on this host. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysApplRunEntry |
|
|
| sysApplRunIndex |
1.3.6.1.2.1.54.1.2.1.1.1 |
| Part of the index for this table. An arbitrary
integer used only for indexing purposes. Generally
monotonically increasing from 1 as new applications are
started on the host, it uniquely identifies application
invocations.
The numbering for this index increases by 1 for each
INVOCATION of an application, regardless of which
installed application package this entry represents a
running instance of.
An example of the indexing for a couple of entries is
shown below.
:
sysApplRunStarted.17.14
sysApplRunStarted.17.63
sysApplRunStarted.18.13
:
In this example, the agent has observed 12 application
invocations when the application represented by entry 18
in the sysApplInstallPkgTable is invoked. The next
invocation detected by the agent is an invocation of
installed application package 17. Some time later,
installed application 17 is invoked a second time.
NOTE: this index is not intended to reflect a real-time
(wall clock time) ordering of application invocations;
it is merely intended to uniquely identify running
instances of applications. Although the
sysApplInstallPkgIndex is included in the INDEX clause
for this table, it serves only to ease searching of
this table by installed application and does not
contribute to uniquely identifying table entries. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..ffffffff |
|
| sysApplRunStarted |
1.3.6.1.2.1.54.1.2.1.1.2 |
| The date and time that the application was started. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| sysApplRunCurrentState |
1.3.6.1.2.1.54.1.2.1.1.3 |
| The current state of the running application instance.
The possible values are running(1), runnable(2) but waiting
for a resource such as CPU, waiting(3) for an event,
exiting(4), or other(5). This value is based on an evaluation
of the running elements of this application instance (see
sysApplElmRunState) and their Roles as defined by
sysApplInstallElmtRole. An agent implementation may
detect that an application instance is in the process of
exiting if one or more of its REQUIRED elements are no
longer running. Most agent implementations will wait until
a second internal poll has been completed to give the
system time to start REQUIRED elements before marking the
application instance as exiting. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RunState |
|
|
| sysApplPastRunTable |
1.3.6.1.2.1.54.1.2.2 |
| A history of the applications that have previously run
on the host computer. An entry's information is moved to
this table from the sysApplRunTable when the invoked
application represented by the entry ceases to be running.
An agent implementation can determine that an application
invocation is no longer running by evaluating the running
elements of the application instance and their Roles as
defined by sysApplInstallElmtRole. Obviously, if there
are no running elements for the application instance,
then the application invocation is no longer running.
If any one of the REQUIRED elements is not running,
the application instance may be in the process of exiting.
Most agent implementations will wait until a second internal
poll has been completed to give the system time to either
restart partial failures or to give all elements time to
exit. If, after the second poll, there are REQUIRED
elements that are not running, then the application
instance may be considered by the agent implementation
to no longer be running.
Entries remain in the sysApplPastRunTable until they
are aged out when either the table size reaches a maximum
as determined by the sysApplPastRunMaxRows, or when an entry
has aged to exceed a time limit as set by
sysApplPastRunTblTimeLimit.
Entries in this table are indexed by sysApplInstallPkgIndex,
sysApplPastRunIndex to facilitate retrieval of all past
run invocations of a particular installed application. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysApplPastRunEntry |
|
| sysApplPastRunEntry |
1.3.6.1.2.1.54.1.2.2.1 |
| The logical row describing an invocation of an application
which was previously run and has terminated. The entry
is basically copied from the sysApplRunTable when the
application instance terminates. Hence, the entry's
value for sysApplPastRunIndex is the same as its value was
for sysApplRunIndex. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysApplPastRunEntry |
|
|
| sysApplPastRunIndex |
1.3.6.1.2.1.54.1.2.2.1.1 |
| Part of the index for this table. An integer
matching the value of the removed sysApplRunIndex
corresponding to this row. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..ffffffff |
|
| sysApplPastRunExitState |
1.3.6.1.2.1.54.1.2.2.1.3 |
| The state of the application instance when it terminated.
This value is based on an evaluation of the running elements
of an application and their Roles as defined by
sysApplInstallElmtRole. An application instance is said to
have exited in a COMPLETE state and its entry is removed
from the sysApplRunTable and added to the sysApplPastRunTable
when the agent detects that ALL elements of an application
invocation are no longer running. Most agent implementations
will wait until a second internal poll has been completed to
give the system time to either restart partial failures or
to give all elements time to exit. A failed state occurs if,
after the second poll, any elements continue to run but
one or more of the REQUIRED elements are no longer running.
All other combinations MUST be defined as OTHER. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
complete(1), failed(2), other(3) |
|
| sysApplPastRunTimeEnded |
1.3.6.1.2.1.54.1.2.2.1.4 |
| The DateAndTime the application instance was determined
to be no longer running. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| sysApplElmtRunTable |
1.3.6.1.2.1.54.1.2.3 |
| The table describes the processes which are
currently executing on the host system. Each entry
represents a running process and is associated with
the invoked application of which that process is a part, if
possible. This table contains an entry for every process
currently running on the system, regardless of whether its
'parent' application can be determined. So, for example,
processes like 'ps' and 'grep' will have entries though they
are not associated with an installed application package.
Because a running application may involve
more than one executable, it is possible to have
multiple entries in this table for each application.
Entries are removed from this table when the process
terminates.
The table is indexed by sysApplElmtRunInstallPkg,
sysApplElmtRunInvocID, and sysApplElmtRunIndex to
facilitate the retrieval of all running elements of a
particular invoked application which has been installed on
the system. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysApplElmtRunEntry |
|
| sysApplElmtRunEntry |
1.3.6.1.2.1.54.1.2.3.1 |
| The logical row describing a process currently
running on this host. When possible, the entry is
associated with the invoked application of which it
is a part. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysApplElmtRunEntry |
|
|
| sysApplElmtRunInstallPkg |
1.3.6.1.2.1.54.1.2.3.1.1 |
| Part of the index for this table, this value
identifies the installed software package for
the application of which this process is a part.
Provided that the process's 'parent' application can be
determined, the value of this object is the same
value as the sysApplInstallPkgIndex for the
entry in the sysApplInstallPkgTable that corresponds
to the installed application of which this process
is a part.
If, however, the 'parent' application cannot be
determined, (for example the process is not part
of a particular installed application), the value
for this object is then '0', signifying that this
process cannot be related back to an application,
and in turn, an installed software package. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElmtRunInvocID |
1.3.6.1.2.1.54.1.2.3.1.2 |
| Part of the index for this table, this value
identifies the invocation of an application of which
this process is a part. Provided that the 'parent'
application can be determined, the value of this object
is the same value as the sysApplRunIndex for the
corresponding application invocation in the
sysApplRunTable.
If, however, the 'parent' application cannot be
determined, the value for this object is then '0',
signifying that this process cannot be related back
to an invocation of an application in the
sysApplRunTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElmtRunIndex |
1.3.6.1.2.1.54.1.2.3.1.3 |
| Part of the index for this table. A unique value
for each process running on the host. Wherever
possible, this should be the system's native, unique
identification number. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElmtRunInstallID |
1.3.6.1.2.1.54.1.2.3.1.4 |
| The index into the sysApplInstallElmtTable. The
value of this object is the same value as the
sysApplInstallElmtIndex for the application element
of which this entry represents a running instance.
If this process cannot be associated with an installed
executable, the value should be '0'. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElmtRunState |
1.3.6.1.2.1.54.1.2.3.1.6 |
| The current state of the running process. The
possible values are running(1), runnable(2) but waiting
for a resource such as CPU, waiting(3) for an event,
exiting(4), or other(5). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RunState |
|
|
| sysApplElmtRunName |
1.3.6.1.2.1.54.1.2.3.1.7 |
| The full path and filename of the process.
For example, '/opt/MYYpkg/bin/myyproc' would
be returned for process 'myyproc' whose execution
path is '/opt/MYYpkg/bin/myyproc'. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
LongUtf8String |
|
|
| sysApplElmtRunCPU |
1.3.6.1.2.1.54.1.2.3.1.9 |
| The number of centi-seconds of the total system's
CPU resources consumed by this process. Note that
on a multi-processor system, this value may
have been incremented by more than one centi-second
in one centi-second of real (wall clock) time. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| sysApplElmtRunMemory |
1.3.6.1.2.1.54.1.2.3.1.10 |
| The total amount of real system memory measured in
Kbytes currently allocated to this process. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| sysApplElmtRunNumFiles |
1.3.6.1.2.1.54.1.2.3.1.11 |
| The number of regular files currently open by the
process. Transport connections (sockets)
should NOT be included in the calculation of
this value, nor should operating system specific
special file types. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| sysApplElmtRunUser |
1.3.6.1.2.1.54.1.2.3.1.12 |
| The process owner's login name (e.g. root). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Utf8String |
|
|
| sysApplElmtPastRunTable |
1.3.6.1.2.1.54.1.2.4 |
| The table describes the processes which have previously
executed on the host system as part of an application.
Each entry represents a process which has previously
executed and is associated with the invoked application
of which it was a part. Because an invoked application
may involve more than one executable, it is possible
to have multiple entries in this table for
each application invocation. Entries are added
to this table when the corresponding process in the
sysApplElmtRun Table terminates.
Entries remain in this table until they are aged out when
either the number of entries in the table reaches a
maximum as determined by sysApplElmtPastRunMaxRows, or
when an entry has aged to exceed a time limit as set by
sysApplElmtPastRunTblTimeLimit. When aging out entries,
the oldest entry, as determined by the value of
sysApplElmtPastRunTimeEnded, will be removed first.
The table is indexed by sysApplInstallPkgIndex (from the
sysApplInstallPkgTable), sysApplElmtPastRunInvocID,
and sysApplElmtPastRunIndex to make it easy to locate all
previously executed processes of a particular invoked
application that has been installed on the system. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysApplElmtPastRunEntry |
|
| sysApplElmtPastRunEntry |
1.3.6.1.2.1.54.1.2.4.1 |
| The logical row describing a process which was
previously executed on this host as part of an
installed application. The entry is basically copied
from the sysApplElmtRunTable when the process
terminates. Hence, the entry's value for
sysApplElmtPastRunIndex is the same as its value
was for sysApplElmtRunIndex. Note carefully: only those
processes which could be associated with an
identified application are included in this table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysApplElmtPastRunEntry |
|
|
| sysApplElmtPastRunInvocID |
1.3.6.1.2.1.54.1.2.4.1.1 |
| Part of the index for this table, this value
identifies the invocation of an application of which
the process represented by this entry was a part.
The value of this object is the same value as the
sysApplRunIndex for the corresponding application
invocation in the sysApplRunTable. If the invoked
application as a whole has terminated, it will be the
same as the sysApplPastRunIndex. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..ffffffff |
|
| sysApplElmtPastRunIndex |
1.3.6.1.2.1.54.1.2.4.1.2 |
| Part of the index for this table. An integer
assigned by the agent equal to the corresponding
sysApplElmtRunIndex which was removed from the
sysApplElmtRunTable and moved to this table
when the element terminated.
Note: entries in this table are indexed by
sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex.
The possibility exists, though unlikely, of a
collision occurring by a new entry which was run
by the same invoked application (InvocID), and
was assigned the same process identification number
(ElmtRunIndex) as an element which was previously
run by the same invoked application.
Should this situation occur, the new entry replaces
the old entry.
See Section: 'Implementation Issues -
sysApplElmtPastRunTable Entry Collisions' for the
conditions that would have to occur in order for a
collision to occur. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElmtPastRunInstallID |
1.3.6.1.2.1.54.1.2.4.1.3 |
| The index into the installed element table. The
value of this object is the same value as the
sysApplInstallElmtIndex for the application element
of which this entry represents a previously executed
process. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..ffffffff |
|
| sysApplElmtPastRunName |
1.3.6.1.2.1.54.1.2.4.1.6 |
| The full path and filename of the process.
For example, '/opt/MYYpkg/bin/myyproc' would
be returned for process 'myyproc' whose execution
path was '/opt/MYYpkg/bin/myyproc'. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
LongUtf8String |
|
|
| sysApplElmtPastRunCPU |
1.3.6.1.2.1.54.1.2.4.1.8 |
| The last known number of centi-seconds of the total
system's CPU resources consumed by this process.
Note that on a multi-processor system, this value may
increment by more than one centi-second in one
centi-second of real (wall clock) time. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| sysApplElmtPastRunMemory |
1.3.6.1.2.1.54.1.2.4.1.9 |
| The last known total amount of real system memory
measured in Kbytes allocated to this process before it
terminated. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElmtPastRunNumFiles |
1.3.6.1.2.1.54.1.2.4.1.10 |
| The last known number of files open by the
process before it terminated. Transport
connections (sockets) should NOT be included in
the calculation of this value. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplPastRunMaxRows |
1.3.6.1.2.1.54.1.2.5 |
| The maximum number of entries allowed in the
sysApplPastRunTable. Once the number of rows in
the sysApplPastRunTable reaches this value, the
management subsystem will remove the oldest entry
in the table to make room for the new entry to be added.
Entries will be removed on the basis of oldest
sysApplPastRunTimeEnded value first.
This object may be used to control the amount of
system resources that can used for sysApplPastRunTable
entries. A conforming implementation should attempt
to support the default value, however, a lesser value
may be necessary due to implementation-dependent issues
and resource availability. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplPastRunTableRemItems |
1.3.6.1.2.1.54.1.2.6 |
| A counter of the number of entries removed from
the sysApplPastRunTable because of table size limitations
as set in sysApplPastRunMaxRows. This counter is the
number of entries the management subsystem has had to
remove in order to make room for new entries (so as not
to exceed the limit set by sysApplPastRunMaxRows) since
the last initialization of the management subsystem. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| sysApplPastRunTblTimeLimit |
1.3.6.1.2.1.54.1.2.7 |
| The maximum time in seconds which an entry in the
sysApplPastRunTable may exist before it is removed.
Any entry that is older than this value will be
removed (aged out) from the table.
Note that an entry may be aged out prior to reaching
this time limit if it is the oldest entry in the
table and must be removed to make space for a new
entry so as to not exceed sysApplPastRunMaxRows. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElemPastRunMaxRows |
1.3.6.1.2.1.54.1.2.8 |
| The maximum number of entries allowed in the
sysApplElmtPastRunTable. Once the number of rows in
the sysApplElmtPastRunTable reaches this value,
the management subsystem will remove the oldest entry
to make room for the new entry to be added. Entries
will be removed on the basis of oldest
sysApplElmtPastRunTimeEnded value first.
This object may be used to control the amount of
system resources that can used for sysApplElemPastRunTable
entries. A conforming implementation should attempt
to support the default value, however, a lesser value
may be necessary due to implementation-dependent issues
and resource availability. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplElemPastRunTableRemItems |
1.3.6.1.2.1.54.1.2.9 |
| A counter of the number of entries removed from the
sysApplElemPastRunTable because of table size limitations
as set in sysApplElemPastRunMaxRows. This counter is the
number of entries the management subsystem has had to
remove in order to make room for new entries (so as not
to exceed the limit set by sysApplElemPastRunMaxRows) since
the last initialization of the management subsystem. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| sysApplElemPastRunTblTimeLimit |
1.3.6.1.2.1.54.1.2.10 |
| The maximum time in seconds which an entry in the
sysApplElemPastRunTable may exist before it is removed.
Any entry that is older than this value will be
removed (aged out) from the table.
Note that an entry may be aged out prior to reaching
this time limit if it is the oldest entry in the
table and must be removed to make space for a new
entry so as to not exceed sysApplElemPastRunMaxRows. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplAgentPollInterval |
1.3.6.1.2.1.54.1.2.11 |
| The minimum interval in seconds that the management
subsystem implementing this MIB will poll the status
of the managed resources. Because of the non-trivial
effort involved in polling the managed resources,
and because the method for obtaining the status of
the managed resources is implementation-dependent,
a conformant implementation may chose a lower bound
greater than 0.
A value of 0 indicates that there is no delay
in the passing of information from the managed
resources to the agent. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplMapTable |
1.3.6.1.2.1.54.1.3.1 |
| The sole purpose of this table is to provide a
'backwards' mapping so that, given a known
sysApplElmtRunIndex (process identification number),
the corresponding invoked application (sysApplRunIndex),
installed element (sysApplInstallElmtIndex), and
installed application package (sysApplInstallPkgIndex)
can be quickly determined.
This table will contain one entry for each process
that is currently executing on the system.
It is expected that management applications will use
this mapping table by doing a 'GetNext' operation with
the known process ID number (sysApplElmtRunIndex) as the
partial instance identifier. Assuming that there is an
entry for the process, the result should return a single
columnar value, the sysApplMapInstallPkgIndex, with the
sysApplElmtRunIndex, sysApplRunIndex, and
sysApplInstallElmtIndex contained in the instance identifier
for the returned MIB object value.
NOTE: if the process can not be associated back to an
invoked application installed on the system, then the
value returned for the columnar value
sysApplMapInstallPkgIndex will be '0' and the instance
portion of the object-identifier will be the process ID
number (sysApplElmtRunIndex) followed by 0.0. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SysApplMapEntry |
|
| sysApplMapEntry |
1.3.6.1.2.1.54.1.3.1.1 |
| A logical row representing a process currently running
on the system. This entry provides the index mapping from
process identifier, back to the invoked application,
installed element, and finally, the installed application
package. The entry includes only one accessible columnar
object, the sysApplMapInstallPkgIndex, but the
invoked application and installed element can be
determined from the instance identifier since they form
part of the index clause. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SysApplMapEntry |
|
|
| sysApplMapInstallElmtIndex |
1.3.6.1.2.1.54.1.3.1.1.1 |
| The index into the sysApplInstallElmtTable. The
value of this object is the same value as the
sysApplInstallElmtIndex for the application element
of which this entry represents a running instance.
If this process cannot be associated to an installed
executable, the value should be '0'. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplMapInstallPkgIndex |
1.3.6.1.2.1.54.1.3.1.1.2 |
| The value of this object identifies the installed
software package for the application of which this
process is a part. Provided that the process's 'parent'
application can be determined, the value of this object
is the same value as the sysApplInstallPkgIndex for the
entry in the sysApplInstallPkgTable that corresponds
to the installed application of which this process
is a part.
If, however, the 'parent' application cannot be
determined, (for example the process is not part
of a particular installed application), the value
for this object is then '0', signifying that this
process cannot be related back to an application,
and in turn, an installed software package. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..ffffffff |
|
| sysApplMIBCompliance |
1.3.6.1.2.1.54.3.1.1 |
| Describes the requirements for conformance to
the System Application MIB |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| sysApplInstalledGroup |
1.3.6.1.2.1.54.3.2.1 |
| The system application installed group contains
information about applications and their constituent
components which have been installed on the host system. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| sysApplRunGroup |
1.3.6.1.2.1.54.3.2.2 |
| The system application run group contains information
about applications and associated elements which have
run or are currently running on the host system. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| sysApplMapGroup |
1.3.6.1.2.1.54.3.2.3 |
| The Map Group contains a single table, sysApplMapTable,
that provides a backwards mapping for determining the
invoked application, installed element, and installed
application package given a known process identification
number. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|