SYMMIB-MIB-MIB
File:
SYMMIB-MIB-MIB.mib (32354 bytes)
Imported modules
Imported symbols
Defined Types
Defined Values
| dmtf |
1.3.6.1.4.1.412 |
| OBJECT IDENTIFIER |
|
|
|
| symbios |
1.3.6.1.4.1.1123 |
| OBJECT IDENTIFIER |
|
|
|
| sYMBIOSSymbiosEventPollingEntry |
1.3.6.1.4.1.1123.3.1.2.5.1 |
| This group is the Symbios Vendor unique group for dealing
with Event Polling. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSymbiosEventPolling |
|
|
| symbiosFlagAtt1 |
1.3.6.1.4.1.1123.3.1.2.5.1.1 |
| An Symbios Vendor Unique Flag. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| sMARTEventPollingAtt2 |
1.3.6.1.4.1.1123.3.1.2.5.1.2 |
| A flag indicating whether or not the CI will poll for SMART
events. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1), unknown(2), notApplicable(3) |
|
| scanEventPollingAtt3 |
1.3.6.1.4.1.1123.3.1.2.5.1.3 |
| A flag indicating whether or not the CI will scan for a change
in Devices and Controllers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1), unknown(2), notApplicable(3) |
|
| sAFTEEventPollingAtt4 |
1.3.6.1.4.1.1123.3.1.2.5.1.4 |
| A flag indicating whether or not the CI will poll for SAF-TE
events. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1), unknown(2), notApplicable(3) |
|
| sYMBIOSSymbiosSmartDeviceEntry |
1.3.6.1.4.1.1123.3.1.2.6.1 |
| This group is a Symbios Vendor unique group for dealing with
Smart Storage Devices. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSymbiosSmartDevice |
|
|
| sYMBIOSSymbiosSmartDeviceState |
1.3.6.1.4.1.1123.3.1.2.6.1.0 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
| symSMARTDeviceIndexAtt1 |
1.3.6.1.4.1.1123.3.1.2.6.1.1 |
| An index into the Symbios Vendor Unique Device info table.
This index corresponds to the Storage Device index. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| sMARTReportingCapabilityAtt2 |
1.3.6.1.4.1.1123.3.1.2.6.1.2 |
| A flag indicating the state of a Devices's SMART reporting
capability. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1), unknown(2), notSupported(3) |
|
| sYMBIOSSAFTEProcessorEntry |
1.3.6.1.4.1.1123.3.1.2.7.1 |
| This group defines a SAF-TE Processor |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSAFTEProcessor |
|
|
| sYMBIOSSAFTEProcessorState |
1.3.6.1.4.1.1123.3.1.2.7.1.0 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
| sCSIIDAtt3 |
1.3.6.1.4.1.1123.3.1.2.7.1.3 |
| The SCSI target/initiator identifier. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Dmi-Integer64 |
|
|
| sCSILUNAtt4 |
1.3.6.1.4.1.1123.3.1.2.7.1.4 |
| The SCSI logical unit number. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Dmi-Integer64 |
|
|
| vendorIDAtt5 |
1.3.6.1.4.1.1123.3.1.2.7.1.5 |
| The vendor ID that is returned in the Inquiry command |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiDisplaystring |
|
|
| productIDAtt6 |
1.3.6.1.4.1.1123.3.1.2.7.1.6 |
| The product ID that is returned in the Inquiry command |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiDisplaystring |
|
|
| hasLocksAtt10 |
1.3.6.1.4.1.1123.3.1.2.7.1.10 |
| If true, then this SAF-TE processor is contained within an
enclosure that has locks. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| hasSpeakersAtt11 |
1.3.6.1.4.1.1123.3.1.2.7.1.11 |
| If true, then this SAF-TE processor is contained within an
enclosure that has speakers. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| doorLockedAtt12 |
1.3.6.1.4.1.1123.3.1.2.7.1.12 |
| If true, then this SAF-TE processor enclosure is locked. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| speakerStatusAtt13 |
1.3.6.1.4.1.1123.3.1.2.7.1.13 |
| If true, then this SAF-TE processor enclsoure speakers are
turned on. If false, then the speakers are off or not installed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| powerOnCyclesAtt15 |
1.3.6.1.4.1.1123.3.1.2.7.1.15 |
| Total number of times the SAF-TE enclosure has been power
on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| temperatureOutOfRangeAtt16 |
1.3.6.1.4.1.1123.3.1.2.7.1.16 |
| If true, then the temperature is out of range. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| sYMBIOSSAFTEControlledFanEntry |
1.3.6.1.4.1.1123.3.1.2.8.1 |
| This group defines status of a fan controlled by a SAF-TE
Processor |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSAFTEControlledFan |
|
|
| sYMBIOSSAFTEControlledFanState |
1.3.6.1.4.1.1123.3.1.2.8.1.0 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
| sAFTEProcessorIndexAtt2 |
1.3.6.1.4.1.1123.3.1.2.8.1.2 |
| The Index to the SAF-TE proccessor that is controlling this
fan. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| statusAtt3 |
1.3.6.1.4.1.1123.3.1.2.8.1.3 |
| The fan status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
fanIsOperational(0), fanIsMalfunctioning(1), fanIsNotInstalled(2), unknownStatus(128) |
|
| sYMBIOSSAFTEControlledPowerSupplyEntry |
1.3.6.1.4.1.1123.3.1.2.9.1 |
| This group defines status of a Power Supply controlled by
a SAF-TE Processor |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSAFTEControlledPowerSupply |
|
|
| sYMBIOSSAFTEControlledPowerSupplyState |
1.3.6.1.4.1.1123.3.1.2.9.1.0 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
| sAFTEProcessorIndexAtt2 |
1.3.6.1.4.1.1123.3.1.2.9.1.2 |
| The Index to the SAF-TE proccessor that is controlling this
Power Supply. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| statusAtt3 |
1.3.6.1.4.1.1123.3.1.2.9.1.3 |
| The Power Supply status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
powerSupplyIsOperationalAndOn(0), powerSupplyIsOperationalAndOff(1), powerSupplyIsMalfunctioningAndCommandedOn(16), powerSupplyIsMalfunctioningAndCommandedOff(17), powerSupplyIsNotPresent(32), powerSupplyIsPresent(33), unknownStatus(128) |
|
| sYMBIOSSAFTEControlledSlotEntry |
1.3.6.1.4.1.1123.3.1.2.10.1 |
| This group defines status of a Slot controlled by a SAF-TE
Processor |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSAFTEControlledSlot |
|
|
| sYMBIOSSAFTEControlledSlotState |
1.3.6.1.4.1.1123.3.1.2.10.1.0 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
| sAFTEProcessorIndexAtt2 |
1.3.6.1.4.1.1123.3.1.2.10.1.2 |
| The Index to the SAF-TE proccessor table that is controlling
this Slot. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| sCSIIDAtt3 |
1.3.6.1.4.1.1123.3.1.2.10.1.3 |
| The SCSI target/initiator identifier for this slot. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Dmi-Integer64 |
|
|
| numberOfInsertionsAtt4 |
1.3.6.1.4.1.1123.3.1.2.10.1.4 |
| The total number of device insertions for this slot while
the enclosure is powered on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| stateAtt5 |
1.3.6.1.4.1.1123.3.1.2.10.1.5 |
| The slot state. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
devicePresentReady(1), devicePresentNotReady(2), devicePresentHotSpare(3), devicePresentReadyForRemoval(4), deviceNotPresent(5), deviceNotPresentReadyForInsertion(6), unconfigured(7), unknownState(8) |
|
| rebuildAtt6 |
1.3.6.1.4.1.1123.3.1.2.10.1.6 |
| Rebuild status |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notRebuilding(0), rebuildInProcess(1), rebuildStopped(2), unknownStatus(3) |
|
| deviceFaultAtt7 |
1.3.6.1.4.1.1123.3.1.2.10.1.7 |
| If true, the device has exhibited some hardware or data fault. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| inFailedArrayAtt8 |
1.3.6.1.4.1.1123.3.1.2.10.1.8 |
| If true, the device is in an array and an error has occurred
on any member of the array. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| inCriticalArrayAtt9 |
1.3.6.1.4.1.1123.3.1.2.10.1.9 |
| If true, the device is in an array that is non fault-tolerant. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| parityCheckAtt10 |
1.3.6.1.4.1.1123.3.1.2.10.1.10 |
| If true, the device is in an array that is undergoing a parity
check operation. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| predictedFaultAtt11 |
1.3.6.1.4.1.1123.3.1.2.10.1.11 |
| If true, the device has been tagged by a fault prediction
algorithm as being likely to fail in the near future. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1), unknown(2) |
|
| sYMBIOSSAFTEControlledTemperatureSensorEntry |
1.3.6.1.4.1.1123.3.1.2.11.1 |
| This group defines status of a Temperature sensor controlled
by a SAF-TE Processor |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSAFTEControlledTemperatureSensor |
|
|
| sYMBIOSSAFTEControlledTemperatureSensorState |
1.3.6.1.4.1.1123.3.1.2.11.1.0 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
| sAFTEProcessorIndexAtt2 |
1.3.6.1.4.1.1123.3.1.2.11.1.2 |
| The Index to the SAF-TE proccessor that is controlling this
Temperature sensor. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| temperatureAtt3 |
1.3.6.1.4.1.1123.3.1.2.11.1.3 |
| The current temperature in degrees Fahrenheit. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| sYMBIOSNetworkAdapter802PortEntry |
1.3.6.1.4.1.1123.3.1.2.12.1 |
| Contains objects related to each of the network ports on
the network adapter. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSNetworkAdapter802Port |
|
|
| sYMBIOSNetworkAdapter802PortState |
1.3.6.1.4.1.1123.3.1.2.12.1.0 |
| Tok_String |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
| portIndexAtt1 |
1.3.6.1.4.1.1123.3.1.2.12.1.1 |
| This attribute is the ordinal of the network port within
the network adapter, i.e. the 'port number'. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| currentNetworkAddressAtt3 |
1.3.6.1.4.1.1123.3.1.2.12.1.3 |
| This is the node address that can be modified by software,
sometimes referred to as the Locally Administered Address (LAA). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiDisplaystring |
|
|
| connectorTypeAtt4 |
1.3.6.1.4.1.1123.3.1.2.12.1.4 |
| This is the type of connector currently being used to physically
attach this port to the LAN. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), aUI(2), uTPCategory3(3), uTPCategory4(4), uTPCategory5(5), bNC(6), sTPRJ45(7), sTPDB9(8), fiberMIC(9), appleAUI(10) |
|
| dataRateAtt5 |
1.3.6.1.4.1.1123.3.1.2.12.1.5 |
| This is the rate at which data is transferred over the LAN
in Mbps. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| dMTFNetworkAdapterHardwareEntry |
1.3.6.1.4.1.412.2.2.4.1 |
| Contains objects related to the network adapter hardware. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SdMTFNetworkAdapterHardware |
|
|
| networkTopologyAtt1 |
1.3.6.1.4.1.412.2.2.4.1.1 |
| This is the network media access method/topology supported
by this adapter. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), x10MbpsEthernet(2), x100MbpsEthernet(3), x10010MbpsEthernet(4), x100MbpsVGAnyLAN(5), x4MbpsTokenRing(6), x16MbpsTokenRing(7), x164MbpsTokenRing(8), x2MbpsArcnet(9), x20MbpsArcnet(10), fDDI(11), aTM(12), appleTalk(13) |
|
| transmissionCapabilityAtt2 |
1.3.6.1.4.1.412.2.2.4.1.2 |
| The transmission capabilities of the adapter. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
normal(1), fullDuplex(2) |
|
| busTypeAtt4 |
1.3.6.1.4.1.412.2.2.4.1.4 |
| This is the type of bus used to interface the adapter to
the host. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), iSA(2), eISA(3), mCA(4), pCI(5), vL(6), pCMCIA(7), parallel(8), nEC98(9), motherboard(256) |
|
| busWidthAtt5 |
1.3.6.1.4.1.412.2.2.4.1.5 |
| This is the width (in bits) of the data path used to interface
the adapter with the host. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), unknown(2), x8BitCard(3), x16BitCard(4), x32BitCard(5), x64BitCard(6), x128BitCard(7) |
|
| sYMBIOSSymbiosHealthEntry |
1.3.6.1.4.1.1123.3.1.2.17.1 |
| This group is the Symbios Vendor unique group for reporting
the health. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SsYMBIOSSymbiosHealth |
|
|
| overallHealthStatusAtt1 |
1.3.6.1.4.1.1123.3.1.2.17.1.1 |
| Status indicating the overall health. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), unknown(2), oK(3), degraded(4), nonRecoverable(5) |
|
| overallControllerHealthStatusAtt2 |
1.3.6.1.4.1.1123.3.1.2.17.1.2 |
| Status indicating the overall health of the controllers. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), unknown(2), oK(3), degraded(4), nonRecoverable(5) |
|
| degradedControllersAtt4 |
1.3.6.1.4.1.1123.3.1.2.17.1.4 |
| The number of controllers reporting a degraded status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| overallDeviceHealthStatusAtt5 |
1.3.6.1.4.1.1123.3.1.2.17.1.5 |
| Status indicating the overall health of the devices. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), unknown(2), oK(3), degraded(4), nonRecoverable(5) |
|
| degradedDevicesAtt7 |
1.3.6.1.4.1.1123.3.1.2.17.1.7 |
| The number of devices reporting a degraded status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|
| iNTELMIFTOMIBTable |
1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472 |
| This group defines attributes required for DMI to SNMP translati
n. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SiNTELMIFTOMIB |
|
| iNTELMIFTOMIBEntry |
1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1 |
| This group defines attributes required for DMI to SNMP translati
n. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SiNTELMIFTOMIB |
|
|
| mIBNameAtt1 |
1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1.1 |
| The MIB name that defines this MIF |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiDisplaystring |
|
|
| mIBOIDAtt2 |
1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1.2 |
| The MIB OID that corresponds to this MIF |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DmiDisplaystring |
|
|
| disableTrapAtt3 |
1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1.3 |
| This attribute can be changed to disable sending oftraps
from this component |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DmiInteger |
|
|