SYMBOL-ENTERPRISE-PRIVATE-MIB
File:
SYMBOL-ENTERPRISE-PRIVATE-MIB.mib (114120 bytes)
Imported modules
Imported symbols
Defined Types
ApAddrFilterEntry |
|
SEQUENCE |
|
|
|
|
disallowedIndex |
INTEGER |
|
|
disallowedMU |
PhysAddress |
|
ApTypeFilterEntry |
|
SEQUENCE |
|
|
|
|
typeIndex |
INTEGER |
|
|
etherType |
OCTET STRING |
|
ApTrafficMatrixEntry |
|
SEQUENCE |
|
|
|
|
apTMTableIndex |
INTEGER |
|
|
apProtoItfName |
DisplayString |
|
|
apNPktsToEnets |
Counter |
|
|
apNPktsToPpps |
Counter |
|
|
apNPktsToRfs |
Counter |
|
|
apNPktsToAPStks |
Counter |
|
ApItfStatEntry |
|
SEQUENCE |
|
|
|
|
apItfStatIndex |
INTEGER |
|
|
apInterfaceName |
DisplayString |
|
|
apPacketsIns |
Counter |
|
|
apPacketsOuts |
Counter |
|
|
apOctetsIns |
Counter |
|
|
apOctetsOuts |
Counter |
|
|
apPktsInPerSec |
Gauge |
|
|
apPktsOutPerSec |
Gauge |
|
|
apOctInPerSec |
Gauge |
|
|
apOctOutPerSec |
Gauge |
|
ApPerFreqStatEntry |
|
SEQUENCE |
|
|
|
|
rfPerFqChannel |
INTEGER |
|
|
rfPerFqPktsSents |
Counter |
|
|
rfPerFqPktsRcvds |
Counter |
|
|
rfPerFqRetries |
Counter |
|
ApMUEntry |
|
SEQUENCE |
|
|
|
|
muIndex |
INTEGER |
|
|
muMacAddr |
PhysAddress |
|
|
muInterface |
INTEGER |
|
|
muState |
INTEGER |
|
|
muPowerMode |
INTEGER |
|
|
muStationID |
INTEGER |
|
|
muLastAPAddr |
PhysAddress |
|
|
muTotalAssoc |
INTEGER |
|
|
muAssocStart |
TimeTicks |
|
|
muLstAssStrt |
TimeTicks |
|
|
muLastAssEnd |
TimeTicks |
|
|
muNPktsSents |
Counter |
|
|
muNPktsRcvds |
Counter |
|
|
muNBytesSents |
Counter |
|
|
muNBytesRcvds |
Counter |
|
|
muNDiscdPkts |
Counter |
|
|
muTmLastData |
TimeTicks |
|
ApKnownAPsEntry |
|
SEQUENCE |
|
|
|
|
apAPMacAddr |
PhysAddress |
|
|
apAPIpAddr |
IpAddress |
|
|
apNetID |
OCTET STRING |
|
|
apAPID |
OCTET STRING |
|
|
apHoppingSeq |
INTEGER |
|
|
apMUs |
INTEGER |
|
|
apKBOS |
INTEGER |
|
|
apKBIS |
INTEGER |
|
|
apLastRcvd |
TimeTicks |
|
ApWLAPItfEntry |
|
SEQUENCE |
|
|
|
|
apWLAPItfID |
OCTET STRING |
|
|
apWLAPItfAddr |
PhysAddress |
|
|
apWLAPItfState |
INTEGER |
|
|
apWLAPPathCost |
INTEGER |
|
|
apDsgnatedRoot |
OCTET STRING |
|
|
apDsgnatedCost |
INTEGER |
|
|
apDsgnatedWLAP |
OCTET STRING |
|
|
apDsgnatedItf |
OCTET STRING |
|
ApAccCtrlEntry |
|
SEQUENCE |
|
|
|
|
allowedIndex |
INTEGER |
|
|
allowedMU |
PhysAddress |
|
ApACLRangeEntry |
|
SEQUENCE |
|
|
|
|
apACLRangeIndex |
INTEGER |
|
|
lowMacAddr |
PhysAddress |
|
|
highMacAddr |
PhysAddress |
|
Defined Values
symbol |
1.3.6.1.4.1.388 |
OBJECT IDENTIFIER |
|
|
|
apProduct |
1.3.6.1.4.1.388.1.1 |
OBJECT IDENTIFIER |
|
|
|
apSNMPInfo |
1.3.6.1.4.1.388.1.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
apRFConfig |
1.3.6.1.4.1.388.1.1.1.4 |
OBJECT IDENTIFIER |
|
|
|
apMUInfo |
1.3.6.1.4.1.388.1.1.2.8 |
OBJECT IDENTIFIER |
|
|
|
apWLAPInfo |
1.3.6.1.4.1.388.1.1.2.11 |
OBJECT IDENTIFIER |
|
|
|
coldStart |
0 |
Access Point cold boot.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message. |
TRAP-TYPE |
|
|
|
authenticationFailure |
4 |
Invalid SNMP Community string.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the remote host
sending SNMP packet with invalid community. |
TRAP-TYPE |
|
|
|
apRFStartUpTrap |
101 |
RF Driver is up.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message. |
TRAP-TYPE |
|
|
|
apACLViolationTrap |
102 |
Mobile Unit MAC address not in the Access control
Table.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit
not in the Access Control Table. |
TRAP-TYPE |
|
|
|
apAPIdConflictTrap |
103 |
An Access Point with the same AP-ID with this Access
Point is found.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message. |
TRAP-TYPE |
|
|
|
apMUAssocTrap |
111 |
Indicates that there is one Mobile Unit associating
with this Access Point.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units associate with the
Access Point at the same time, muMacAddr
belongs to the last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. |
TRAP-TYPE |
|
|
|
apMUUnAssocTrap |
112 |
Indicates that there is one Mobile Unit no longer
associating with this Access Point anymore.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units un-associate with
the Access Point at the same time, muMacAddr
belongs to the last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. |
TRAP-TYPE |
|
|
|
apMUToCAMTrap |
113 |
Indicates that the Mobile Unit changes from PSP mode
to CAM mode.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units change their mode
at the same time, muMacAddr belongs to the
last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. |
TRAP-TYPE |
|
|
|
apMUToPSPTrap |
114 |
Indicates that the Mobile Unit changes from CAM mode
to PSP mode.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units change their mode
at the same time, muMacAddr belongs to the
last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. |
TRAP-TYPE |
|
|
|
apRootWLAPUpTrap |
121 |
Indicates that the Root AP connection is setup and
is ready to forward data.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Root AP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. |
TRAP-TYPE |
|
|
|
apRootWLAPLostTrap |
122 |
If the current wireless AP does not receive Beacon
packet from its Root AP within one second, it will
consider the Root AP is lost. The wireless AP will
eventually reset itself to re-establish the network
topology.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Root AP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. |
TRAP-TYPE |
|
|
|
apDsgntedWLAPUpTrap |
123 |
Indicates that the Designated WLAP connection is setup
and is ready to forward data.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Designated
WLAP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. |
TRAP-TYPE |
|
|
|
apDsgnatedWLAPLostTrap |
124 |
If the current wireless AP does not receive Config BPDU
(Bridge Protocol Data Unit) packet from its Designated
WLAP for MAX AGE time, it will consider that the
Designated WLAP is lost.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Designated
WLAP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. |
TRAP-TYPE |
|
|
|
apModelnumber |
1.3.6.1.4.1.388.1.1.1.1.1 |
The Model Number of the Access Point device. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..32) |
|
apSerialnumber |
1.3.6.1.4.1.388.1.1.1.1.2 |
The Serial Number of the Access Point system. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
apHardwareRev |
1.3.6.1.4.1.388.1.1.1.1.3 |
The current revision of the Access Point hardware. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..8) |
|
apMyMacAddr |
1.3.6.1.4.1.388.1.1.1.1.4 |
The MAC address of the AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
apAPFirmwareRev |
1.3.6.1.4.1.388.1.1.1.1.5 |
The current revision of the Access Point firmware. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
apRFFirmwareRev |
1.3.6.1.4.1.388.1.1.1.1.6 |
The current revision of the Access Point radio
firmware. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
apSystemName |
1.3.6.1.4.1.388.1.1.1.2.1 |
An ASCII string to identify this Access Point (up to
31 characters). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
apMyIPAddr |
1.3.6.1.4.1.388.1.1.1.2.2 |
The IP address for the AP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
apSubnetMask |
1.3.6.1.4.1.388.1.1.1.2.3 |
The IP subnet mask for the AP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
apGatewayIPAddr |
1.3.6.1.4.1.388.1.1.1.2.4 |
The IP address for the default gateway. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
apDefaultInterface |
1.3.6.1.4.1.388.1.1.1.2.5 |
Specifies the default interface (Ethernet or PPP) for
the Access Point to forward an unknown packet. Default
is ethernet(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ppp(1), ethernet(2) |
|
apEnetPortState |
1.3.6.1.4.1.388.1.1.1.2.6 |
Specifies the state of the Ethernet interface.
Default is up(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
apEthernetTimeOut |
1.3.6.1.4.1.388.1.1.1.2.7 |
The Ethernet time out value ranges from 30 to 255
seconds. If the value is:
- 0: the Ethernet Time Out function is disabled.
- 1: detect Ethernet timeout by hardware circuitry.
- 2: send WLAP Alive BPDU on Ethernet interface to let
other WLAP on the same Ethernet segment to detect
it's existence.
- 3: keep track of WLAP Alive BPDU on Ethernet inter-
face. If the BPDU is missing for 'WLAP Hello Time'
seconds, both Ethernet Attached and Activity LEDs
will flash and the RF interface is disabled until
the WLAP Alive BPDU is received again, then the
AP will reset itself.
When the Ethernet connection is broken:
- if WLAP Mode is disabled, the AP will clear the MU
table and disable the RF interface until the Ethernet
connection is up.
- if WLAP Mode is enabled, the AP will set the timeout
value to zero and reset itself.
The default value is 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apTelnetEnable |
1.3.6.1.4.1.388.1.1.1.2.8 |
Enables/Disables Telnet access to the AP. Default is
enabled(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apAccCtrlEnable |
1.3.6.1.4.1.388.1.1.1.2.9 |
Enables/Disables the Access Control function.
When it is enabled, a Mobile Unit can associate with
the Access Point only if its MAC address is in the
Access Control Table. Default is disabled(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apTypeFilterEnable |
1.3.6.1.4.1.388.1.1.1.2.10 |
Specifies the type of Access Point Type Filtering
operation, i.e. Disabled/Forward/Discard. Default is
disabled(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), forward(2), discard(3) |
|
apMUAutoCfgEnable |
1.3.6.1.4.1.388.1.1.1.2.11 |
Enables/Disables Autoconfiguration of Mobile Units.
When enabled, the Net ID is automatically downloaded
to Mobile Units. Default is disabled(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apAutoCfgEnable |
1.3.6.1.4.1.388.1.1.1.2.12 |
Enables/Disables Access Point auto configuration. When
enabled, the Access Point will automatically select
unique BSSs and hopping sequences by negotiating with
one another. Default is enabled(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apWNMPEnable |
1.3.6.1.4.1.388.1.1.1.2.13 |
Enables/Disables Use of the WNMP agent. Default is
enabled(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apAPStateXchgEnable |
1.3.6.1.4.1.388.1.1.1.2.14 |
Enables/Disables exchanging Access Point to Access
Point state information by using WNMP protocol. Default
is enabled(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apSNMPMode |
1.3.6.1.4.1.388.1.1.1.3.1 |
Specifies the mode of the SNMP Agent operation, i.e.
Disabled/Readonly/ReadWrite. Default is readwrite(3). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), readonly(2), readwrite(3) |
|
apTrapRcvrIpAdr |
1.3.6.1.4.1.388.1.1.1.3.4 |
Trap receiver's (i.e. Network Manager's) IP address. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
apAllTrapsEnable |
1.3.6.1.4.1.388.1.1.1.3.5 |
Enables/Disables all SNMP traps. Default is disable(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apColdBootTrapEnable |
1.3.6.1.4.1.388.1.1.1.3.6 |
Enables/Disables Access Point Cold Boot trap. Default
is disable(2). This is a generic-trap and the trap
code is 0.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apAuthenFailureTrapEnable |
1.3.6.1.4.1.388.1.1.1.3.7 |
Enables/Disables authentication failure trap. Default
is disable(2). This is a generic-trap and the trap code
is 4.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apRFTrapEnable |
1.3.6.1.4.1.388.1.1.1.3.8 |
Enables/Disables Access Point RF driver startup trap.
Default is disable(2). This is an enterprise-specific
trap and the trap code is 101.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apACLTrapEnable |
1.3.6.1.4.1.388.1.1.1.3.9 |
Enables/Disables Access Control violation trap. Default
is disable(2). This is an enterprise-specific trap and
the trap code is 102.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apMUStateChngTrapEnable |
1.3.6.1.4.1.388.1.1.1.3.10 |
Enables/Disables Mobile Unit State Change trap. Default
is disable(2). Once enabled, the following 4
enterprise- specific traps will be generated :
- MU Association Trap, the trap code is 111.
- MU Un-association Trap, the trap code is 112.
- MU To CAM Trap, the trap code is 113.
- MU To PSP Trap, the trap code is 114.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apAPIdConflictTrapEnable |
1.3.6.1.4.1.388.1.1.1.3.11 |
Enables/Disables AP-Id conflict trap. Default is
disable(2). This is an enterprise-specific trap and the
trap code is 103.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apWLAPConnChngTrapEnable |
1.3.6.1.4.1.388.1.1.1.3.12 |
Enables/Disables WLAP Connection Change trap. Default
is disable(2). Once enabled, the following 4
enterprise-specific traps will be generated :
- Root AP Up Trap, the trap code is 121.
- Root AP Lost Trap, the trap code is 122.
- Designated WLAP Up Trap, the trap code is 123.
- Designated WLAP Lost Trap, the trap code is 124.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apRFPortState |
1.3.6.1.4.1.388.1.1.1.4.1 |
Specifies the state of the RF Interface. Default is
up(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
apNetId |
1.3.6.1.4.1.388.1.1.1.4.2 |
The current Net ID (i.e. operational ESS ID) for the
AP. This value determines which APs are on the same
network and ranges from 1 - 0x1fe. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apApId |
1.3.6.1.4.1.388.1.1.1.4.3 |
The current AP-ID (i.e. BSS ID) for this Access Point.
This value ranges from 0 - 0x79.
Writing a value will force this Access Point to use
that value as AP-ID, unless it conflicts with that used
by another Access Point. In that case this Access Point
will select its own value. The Access Point will always
insure that the AP-ID is unique. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apHopSequence |
1.3.6.1.4.1.388.1.1.1.4.4 |
The hopping sequence defined in the system configura-
tion table for this AP. If WLAP mode is enabled, this
Access Point will follow the hopping sequence
(defined as apWLAPHopSequence) of the Root AP.
Writing a value will force this Access Point to use
that value as hopping sequence, unless it conflicts
with that used by another AP. In that case this Access
Point will select its own value. The Access Point will
always insure that the hopping sequence is unique
(given that there are fewer Access Points than the
maximum number of hopping sequences). For the United
States, this value ranges from 1-22, for Japan 0-3,
... TBD. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apCountryName |
1.3.6.1.4.1.388.1.1.1.4.5 |
The country for which the Access Point radio is
configured. It is set at the factory and may not be
altered. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..36) |
|
apHopSet |
1.3.6.1.4.1.388.1.1.1.4.6 |
The current hopping sequence set used by this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apAntennaSelect |
1.3.6.1.4.1.388.1.1.1.4.7 |
Select either Primary antenna only (i.e. Disable
antenna diversity) or both Primary and Secondary
antennas (i.e. Enable antenna diversity). Default is
primary-only(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
primary-and-secondary(1), primary-only(2) |
|
apDTIMInterval |
1.3.6.1.4.1.388.1.1.1.4.8 |
The frequency of DTIM packets as a multiple of TIM
packets. Default is 10. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apBCMCQMax |
1.3.6.1.4.1.388.1.1.1.4.9 |
The maximum size of broadcast/multicast queue.
Default is 10. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apReassemblyTimeOut |
1.3.6.1.4.1.388.1.1.1.4.10 |
The re-assembly timeout (in .5 ms units).
Default is 9000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apMaxRetries |
1.3.6.1.4.1.388.1.1.1.4.11 |
The maximum number of allowed retries before aborting a
transmission. Default is 15. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apMulticastMask |
1.3.6.1.4.1.388.1.1.1.4.12 |
RF multicast packets with these upper 32 bits are sent
out immediately. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..4) |
|
apEncryptCoeff |
1.3.6.1.4.1.388.1.1.1.4.13 |
The encrytion coefficient value in hexadecimal. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apEncryptPhase |
1.3.6.1.4.1.388.1.1.1.4.14 |
The encrytion phase value in hexadecimal. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apWLAPMode |
1.3.6.1.4.1.388.1.1.1.4.15 |
Enables/Disables Wireless AP capability. Default is
disabled(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apWLAPPriority |
1.3.6.1.4.1.388.1.1.1.4.16 |
Provides a user with the influence to determine the
Root AP in wireless operation. The priority value is
added as the most significant portion of the MAC
address to form the WLAP ID. A WLAP with a lower
numerical value for priority is more likely to become
the Root AP. Default is 8000 hex from the 0 - 0xFFFF
range. Reset the Access Point for value to
take effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apWLAPManualAPID |
1.3.6.1.4.1.388.1.1.1.4.17 |
Specifies the AP-ID of a particular WLAP and forces
the current WLAP to associate only with that WLAP.
When WLAP Manaul AP ID is set to the current AP-ID,
the current AP jumps into Functional state immediately
and waits for an Association Request from the other
WLAP. Reset AP for value to take effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apWLAPEncryption |
1.3.6.1.4.1.388.1.1.1.4.18 |
Enables/Disables Wireless AP encryption capability.
Default is disabled(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
apWLAPHelloTime |
1.3.6.1.4.1.388.1.1.1.4.19 |
Sets the time lapse, in seconds, between Configuration
BPDUs (Bridge Protocol Data Unit) generated by a Root
AP. Default is 20 seconds. Reset AP for value to take
effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apWLAPMaxAge |
1.3.6.1.4.1.388.1.1.1.4.20 |
Specifies how long, in seconds, a Configuration BPDU
(Bridge Protocol Data Unit) is kept before it is
judged too old and discarded. Consequently, the
interface is considered to be disconnected. Default
is 100 seconds. Recommended value is multiple of the
WLAP Hello Time. Reset AP for value to take effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apWLAPFwdDelay |
1.3.6.1.4.1.388.1.1.1.4.21 |
Specifies how long, in seconds, an WLAP is prevented
from forwarding data packets to an interface.
This delay is to allow the spread of news of a topology
change to all parts of a network. Default is 10 secs.
Reset AP for value to take effect. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apPPPState |
1.3.6.1.4.1.388.1.1.1.5.1 |
Indicates the current state of the PPP connection
machine. Default is down(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
apSerialPortUse |
1.3.6.1.4.1.388.1.1.1.5.2 |
Specifies whether the Serial Interface is to be used
as User Interface(UI) or PPP. Default is ui(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ppp(1), ui(2) |
|
apModemConnected |
1.3.6.1.4.1.388.1.1.1.5.3 |
Specifies whether the Serial Interface has a modem
attached to it. Default is no(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apConnectMode |
1.3.6.1.4.1.388.1.1.1.5.4 |
Specifies the Modem connection mode:
- originate(1): AP sends dial-out information.
- answer(2): AP waits for dial-in information.
Default is answer(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
originate(1), answer(2) |
|
apDialOutNumber |
1.3.6.1.4.1.388.1.1.1.5.5 |
Specifies the number to be dialed by the modem. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..32) |
|
apDialOutMode |
1.3.6.1.4.1.388.1.1.1.5.6 |
Specifies the dialout mode:
- auto(1): Modem dial out during startup time.
- manual(2): Modem dial out by manned intervention.
Dedault is auto(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), manual(2) |
|
apAnswerWaitTime |
1.3.6.1.4.1.388.1.1.1.5.7 |
Specifies the period (in seconds) the AP will wait for
the remote unit to answer the call. Default is 60 sec. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apModemSpeaker |
1.3.6.1.4.1.388.1.1.1.5.8 |
Specifies if modem speaker is turned on(1) or off(2).
Default is on(1). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
apInactivityTimeout |
1.3.6.1.4.1.388.1.1.1.5.9 |
Specifies the User Interface Inactivity timeout in
minutes. 0 means no timeout. Default is 5 minutes. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apPPPTimeout |
1.3.6.1.4.1.388.1.1.1.5.10 |
Specifies the PPP event timeout in seconds. Default is
3 seconds. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apPPPTerminates |
1.3.6.1.4.1.388.1.1.1.5.11 |
Specifies the maximum number of PPP terminate
requests. Default is 10. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apAddrFilterTable |
1.3.6.1.4.1.388.1.1.1.6 |
A table of MAC addresses not allowed to associate with
the Access Point.
The maximum number of entries in the table is 128. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApAddrFilterEntry |
|
apAddrFilterEntry |
1.3.6.1.4.1.388.1.1.1.6.1 |
An entry in the table of Address Filter.
A row in this table is created by setting the value of
disallowedMU to the MAC address of the MU not allowed
to associate with the Access Point.
A row in this table is deleted by setting the value of
disallowedMU to '000000000000'. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApAddrFilterEntry |
|
|
disallowedIndex |
1.3.6.1.4.1.388.1.1.1.6.1.1 |
Address Filter Table index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..128 |
|
disallowedMU |
1.3.6.1.4.1.388.1.1.1.6.1.2 |
MU MAC address which is not allowed to be associated
with this Access Point. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
apTypeFilterTable |
1.3.6.1.4.1.388.1.1.1.7 |
A table of Ethernet types (i.e. 16-bit DIX Ethernet
type), which are entered by the user and supported for
the type filtering function.
The maximum number of entries in the table is 16. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApTypeFilterEntry |
|
apTypeFilterEntry |
1.3.6.1.4.1.388.1.1.1.7.1 |
An entry in the table of Type Filter.
A row in this table is created by setting the value of
etherType to Ethernet packet type in hexadecimal.
A row in this table is deleted by setting the value of
etherType to 00 |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApTypeFilterEntry |
|
|
typeIndex |
1.3.6.1.4.1.388.1.1.1.7.1.1 |
Filter Type Table index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16 |
|
etherType |
1.3.6.1.4.1.388.1.1.1.7.1.2 |
A 16-bit Ethernet Protocol Type in hexadecimal. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apTrafficMatrixTable |
1.3.6.1.4.1.388.1.1.2.1 |
A table of Access Point Traffic Matrix which provides
information on packets transmitted from one interface
to another (Ethernet, PPP, radio, AP). The table also
displays the number of broadcast packets transmitted
from the Access Point.
The current number of entries is 5. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApTrafficMatrixEntry |
|
apTrafficMatrixEntry |
1.3.6.1.4.1.388.1.1.2.1.1 |
An entry in the table of Access Point Traffic Matrix.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApTrafficMatrixEntry |
|
|
apTMTableIndex |
1.3.6.1.4.1.388.1.1.2.1.1.1 |
Access Point Traffic Matrix Table index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..5 |
|
apProtoItfName |
1.3.6.1.4.1.388.1.1.2.1.1.2 |
Access Point Protocol Interface Name (i.e. Ethernet, PPP,
Radio, AP). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..12) |
|
apNPktsToEnets |
1.3.6.1.4.1.388.1.1.2.1.1.3 |
Indicates the number of packets sent from the Access
Point Protocol Interface to the Ethernet Interface.
This field should always be zero if the Access Point
Protocol Interface is Ethernet. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apNPktsToPpps |
1.3.6.1.4.1.388.1.1.2.1.1.4 |
Indicates the number of packets sent from the Access
Point Protocol Interface to the PPP Interface.
This field is meaningful only if the PPP interface is
enabled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apNPktsToRfs |
1.3.6.1.4.1.388.1.1.2.1.1.5 |
Indicates the number of packets sent from the Access
Point Protocol Interface to the RF Interface. If the
Access Point Protocol Interface is RF, these are
frames from one MU to another. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apNPktsToAPStks |
1.3.6.1.4.1.388.1.1.2.1.1.6 |
Indicates the number of packets sent from the Access
Point Protocol Interface to the internal Access Point
stack. This field should always be zero if the Access
Point Protocol Interface is Access Point Stack. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apItfStatTable |
1.3.6.1.4.1.388.1.1.2.2 |
A table of Access Point Interfaces Statistics, which
provides packets forwarding statistics for each inter-
face (Ethernet, PPP, RF, AP stack).
Interface statistics also provide performance informa-
tion for each interface in Packets-per-second (PPS) and
Bytes- per-second (BPS).
The AP interface indicates packets sent to the AP stack
(e.g. configuration requests, SNMP, Telnet etc.).
The current number of entries is 4. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApItfStatEntry |
|
apItfStatEntry |
1.3.6.1.4.1.388.1.1.2.2.1 |
An entry in the table of Access Point Interface
Statistics.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApItfStatEntry |
|
|
apItfStatIndex |
1.3.6.1.4.1.388.1.1.2.2.1.1 |
Access Point Interface Statistics Table index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4 |
|
apInterfaceName |
1.3.6.1.4.1.388.1.1.2.2.1.2 |
Access Point Interface Name (Ethernet, PPP, RF,
AP). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..12) |
|
apPacketsIns |
1.3.6.1.4.1.388.1.1.2.2.1.3 |
Indicates the number of good packets received on the
specified interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apPacketsOuts |
1.3.6.1.4.1.388.1.1.2.2.1.4 |
Indicates the number of packets successfully
transmitted on the specified interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apOctetsIns |
1.3.6.1.4.1.388.1.1.2.2.1.5 |
Indicates the number of good bytes received on the
specified interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apOctetsOuts |
1.3.6.1.4.1.388.1.1.2.2.1.6 |
Indicates the number of bytes successfully transmitted
on the specified interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apPktsInPerSec |
1.3.6.1.4.1.388.1.1.2.2.1.7 |
Indicates the number of good packets per second
received on the specified Interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
apPktsOutPerSec |
1.3.6.1.4.1.388.1.1.2.2.1.8 |
Indicates the number of packets per second successfully
transmitted on the specified interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
apOctInPerSec |
1.3.6.1.4.1.388.1.1.2.2.1.9 |
Indicates the number of good bytes per second
received on the specified Interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
apOctOutPerSec |
1.3.6.1.4.1.388.1.1.2.2.1.10 |
Indicates the number of bytes per second successfully
transmitted on the specified interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
apEPktsSeens |
1.3.6.1.4.1.388.1.1.2.3.1 |
Indicates the number of packets that have been seen on
the Ethernet interface. Most of these packets are for
stations other than those associated with this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEPktsForwardeds |
1.3.6.1.4.1.388.1.1.2.3.2 |
Indicates the number of Ethernet packets forwarded
from the Ethernet interface to other interfaces. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEPktsDiscNoMatchs |
1.3.6.1.4.1.388.1.1.2.3.3 |
Indicates the number of packets discarded due to
unknown destination (i.e. no database entry). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEPktsDiscForceds |
1.3.6.1.4.1.388.1.1.2.3.4 |
Indicates the number of packets discarded due to Type
or Address filters applied. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEPktsDiscBuffers |
1.3.6.1.4.1.388.1.1.2.3.5 |
Indicates the number of packets discarded due to lack
of available buffers in AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEPktsDiscCRCs |
1.3.6.1.4.1.388.1.1.2.3.6 |
Indicates the number of packets discarded due to CRC
errors. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEPktsSents |
1.3.6.1.4.1.388.1.1.2.3.7 |
Indicates the number of packets sent by this Ethernet
Port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEAnyCollisions |
1.3.6.1.4.1.388.1.1.2.3.8 |
Indicates the number of packets that suffer at least
one collision. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apE1orMoreColls |
1.3.6.1.4.1.388.1.1.2.3.9 |
Indicates the number of packets that suffer more than
one collision. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEMaxCollisions |
1.3.6.1.4.1.388.1.1.2.3.10 |
Indicates the number of packets that suffer more than
the maximum number of collisions. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apELateCollisions |
1.3.6.1.4.1.388.1.1.2.3.11 |
Indicates the number of packets that suffer late
collisions. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apEPktsDefers |
1.3.6.1.4.1.388.1.1.2.3.12 |
Indicates the times AP had to defer transmit requests
on Ethernet due to busy medium. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfBcMcPktsSents |
1.3.6.1.4.1.388.1.1.2.4.1 |
Indicates the number of broadcast/multicast packets
that have been successfully transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfBcMcPktsRcvds |
1.3.6.1.4.1.388.1.1.2.4.2 |
Indicates the number of broadcast/multicast packets
that have been successfully received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfBcMcOctSents |
1.3.6.1.4.1.388.1.1.2.4.3 |
Indicates the number of broadcast/multicast bytes that
have been successfully transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfBcMcOctRcvds |
1.3.6.1.4.1.388.1.1.2.4.4 |
Indicates the number of broadcast/multicast bytes that
have been successfully received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfSysPktsSents |
1.3.6.1.4.1.388.1.1.2.4.5 |
Indicates the number of system packets (includes probe
operations packets) that have been successfully
transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfSysPktsRcvds |
1.3.6.1.4.1.388.1.1.2.4.6 |
Indicates the number of system packets (includes probes
/associate packets) that have been successfully
received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfSBcMcPktsSents |
1.3.6.1.4.1.388.1.1.2.4.7 |
Indicates the number of system broadcast/multicast
packets (includes beacons) that have been successfully
transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfSBcMcPktsRcvds |
1.3.6.1.4.1.388.1.1.2.4.8 |
Indicates the number of system broadcast/multicast
iincludes beacons) packets that have been successfully
received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfSuccFragPkts |
1.3.6.1.4.1.388.1.1.2.4.9 |
Indicates the number of packets that were fragmented
and for which all fragments were acked. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfUnsuccFragPkts |
1.3.6.1.4.1.388.1.1.2.4.10 |
Indicates the number of packets that were fragmented
but for which one or more fragments were not acked. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfTotalFragSents |
1.3.6.1.4.1.388.1.1.2.4.11 |
Indicates the number of packets fragments that have
been sent. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfTotalFragRcvds |
1.3.6.1.4.1.388.1.1.2.4.12 |
Indicates the number of packets fragments that have
been received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfSuccReassPkts |
1.3.6.1.4.1.388.1.1.2.4.13 |
Indicates the number of packets that were reassigned
and successfully reassembled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfUnsuccReassPkts |
1.3.6.1.4.1.388.1.1.2.4.14 |
Indicates the number of packets that were
unsuccessfully reassembled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfAssocMUs |
1.3.6.1.4.1.388.1.1.2.4.15 |
Indicates the number of MUs currently associated with
this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfRcvdCRCErrors |
1.3.6.1.4.1.388.1.1.2.4.16 |
Indicates the number of packets that were received but
had the CRC errors. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfRcvdDupPkts |
1.3.6.1.4.1.388.1.1.2.4.17 |
Indicates the number of packets that were received but
were duplicates of previously received. This is usually
an indication that an ACK was not received by the
sending unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfTotalCollisions |
1.3.6.1.4.1.388.1.1.2.4.18 |
Indicates the number of collisions that have occured on
the interface. A collision on the RF interface means
that an ack was not received or that a RTS was not
answered by a CTS. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfPktsWithoutColls |
1.3.6.1.4.1.388.1.1.2.4.19 |
Indicates the number of packets without any collision. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfPktsWithMaxColls |
1.3.6.1.4.1.388.1.1.2.4.20 |
Indicates the number of packets that suffered the
maximum number of collisions. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfPktsWithColls |
1.3.6.1.4.1.388.1.1.2.4.21 |
Indicates the number of packets that suffered at least
one collision. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apPerFreqStatTable |
1.3.6.1.4.1.388.1.1.2.5 |
A table of Radio Per Frequency statistics, which is
based on the historical frequency records used by this
Access Point.
The current number of entries is 78. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApPerFreqStatEntry |
|
apPerFreqStatEntry |
1.3.6.1.4.1.388.1.1.2.5.1 |
An entry in the table of Radio per frequency
statistics.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApPerFreqStatEntry |
|
|
rfPerFqChannel |
1.3.6.1.4.1.388.1.1.2.5.1.1 |
Radio Frequency channel number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..79 |
|
rfPerFqPktsSents |
1.3.6.1.4.1.388.1.1.2.5.1.2 |
Counter for the packets sent per frequency. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfPerFqPktsRcvds |
1.3.6.1.4.1.388.1.1.2.5.1.3 |
Counter for the packets received per frequency. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rfPerFqRetries |
1.3.6.1.4.1.388.1.1.2.5.1.4 |
Counter for the retries per frequency. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apNbrOfDialouts |
1.3.6.1.4.1.388.1.1.2.6.1 |
Indicates the number of dialout attempts by the AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apDialoutFailures |
1.3.6.1.4.1.388.1.1.2.6.2 |
Indicates the number of dialout failures by the AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apNbrOfAnswers |
1.3.6.1.4.1.388.1.1.2.6.3 |
Indicates the number of answer attempts by the AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apCurrCallTime |
1.3.6.1.4.1.388.1.1.2.6.4 |
Indicates the length in seconds of current connection
session. Note: the time is relative to the boot time
of this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
apLastCallTime |
1.3.6.1.4.1.388.1.1.2.6.5 |
Indicates the length in seconds of last connection
session. Note: the time is relative to the boot time
of this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
apWNMPCfgPkts |
1.3.6.1.4.1.388.1.1.2.7.1 |
Indicates the number of WNMP configuration requests
received from NetVision. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
wEchoRequests |
1.3.6.1.4.1.388.1.1.2.7.2 |
Indicates the number of WNMP Echo Requests received
by this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
wPingRequests |
1.3.6.1.4.1.388.1.1.2.7.3 |
Indicates the number of WNMP ping requests received by
this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
wPktsFromNVs |
1.3.6.1.4.1.388.1.1.2.7.4 |
Indicates the number of WNMP packets that were received
from NetVision via this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
wPPktsToNVs |
1.3.6.1.4.1.388.1.1.2.7.5 |
Indicates the number of WNMP packets that were sent to
the NetVision via this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
wPassThruEchoes |
1.3.6.1.4.1.388.1.1.2.7.6 |
Indicates the number of WNMP packets for other stations
that passed through this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apCurrentMUs |
1.3.6.1.4.1.388.1.1.2.8.1 |
Indicates the number of MUs currently associated with
this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apMaxMUs |
1.3.6.1.4.1.388.1.1.2.8.2 |
Indicates the highest number of MUs ever associated
with this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apTotalAssocs |
1.3.6.1.4.1.388.1.1.2.8.3 |
Indicates the total number of associations by all MUs
with this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apMUTable |
1.3.6.1.4.1.388.1.1.2.8.4 |
A table of information for a specific MU associated
with this Access Point.
The current number of entries is 128. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApMUEntry |
|
apMUEntry |
1.3.6.1.4.1.388.1.1.2.8.4.1 |
An entry in the table of information for a specific MU
associated with this Access Point.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApMUEntry |
|
|
muIndex |
1.3.6.1.4.1.388.1.1.2.8.4.1.1 |
Specific MU information Table index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..128 |
|
muMacAddr |
1.3.6.1.4.1.388.1.1.2.8.4.1.2 |
The MAC address of the MU associated with this AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
muInterface |
1.3.6.1.4.1.388.1.1.2.8.4.1.3 |
Indicates the interface on which this MU is located.
Note: The AP may learn of an MU via the RF network
or from the wired networks such as Ethernet or PPP.
In this release, the AP does not keep track of those
MUs reachable via the Ethernet, but that will change
in future releases. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ethernet(1), ppp(2), rf(3), apstack(4) |
|
muState |
1.3.6.1.4.1.388.1.1.2.8.4.1.4 |
Indicates the state of this MU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
associated(3), not-associated(4) |
|
muPowerMode |
1.3.6.1.4.1.388.1.1.2.8.4.1.5 |
Indicates the MU power mode (Power Save Protocol mode
or Continue Active Mode.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cam(1), psp(2) |
|
muStationID |
1.3.6.1.4.1.388.1.1.2.8.4.1.6 |
Indicates the MU station ID. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
muLastAPAddr |
1.3.6.1.4.1.388.1.1.2.8.4.1.7 |
Indicates the MAC address of the last AP with which
this MU had an association. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
muTotalAssoc |
1.3.6.1.4.1.388.1.1.2.8.4.1.8 |
Indicates the total associations for this MU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
muAssocStart |
1.3.6.1.4.1.388.1.1.2.8.4.1.9 |
Indicates when the MU began its current association
with this AP.
Note: Time is represented in seconds and the time
is relative to the boot time of this AP.
This is also true for all the association objects
listed below. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
muLstAssStrt |
1.3.6.1.4.1.388.1.1.2.8.4.1.10 |
Indicates when the MU began its prior association
with this AP.
If this is the first association with this AP, this
value is zero. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
muLastAssEnd |
1.3.6.1.4.1.388.1.1.2.8.4.1.11 |
Indicates when the MU ended its previous association
with this AP.
If this is the first association with this AP, this
value is zero. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
muNPktsSents |
1.3.6.1.4.1.388.1.1.2.8.4.1.12 |
Indicates the number of packets successfully
transmitted to this MU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
muNPktsRcvds |
1.3.6.1.4.1.388.1.1.2.8.4.1.13 |
Indicates the number of Good Packets received from this
MU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
muNBytesSents |
1.3.6.1.4.1.388.1.1.2.8.4.1.14 |
Indicates the number of bytes successfully transmitted
to this MU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
muNBytesRcvds |
1.3.6.1.4.1.388.1.1.2.8.4.1.15 |
Indicates the number of Good Bytes received from this
MU. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
muNDiscdPkts |
1.3.6.1.4.1.388.1.1.2.8.4.1.16 |
Indicates the number of received packets discarded
because no buffers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
muTmLastData |
1.3.6.1.4.1.388.1.1.2.8.4.1.17 |
Indicates the time when the last good packet was
received from this MU.
The packet may be either an ACK, Data, or Poll. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
apKnownAPsTable |
1.3.6.1.4.1.388.1.1.2.9 |
A table of information on other Access Points known by
this Access Point.
The current number of entries is 32. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApKnownAPsEntry |
|
apKnownAPsEntry |
1.3.6.1.4.1.388.1.1.2.9.1 |
An entry in the table of information on the Known
Access Points.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApKnownAPsEntry |
|
|
apAPMacAddr |
1.3.6.1.4.1.388.1.1.2.9.1.1 |
Mac Address of Known AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
apAPIpAddr |
1.3.6.1.4.1.388.1.1.2.9.1.2 |
IP Address of Known AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
apNetID |
1.3.6.1.4.1.388.1.1.2.9.1.3 |
Network ID (i.e. ESS ID) of the Known AP in
hexadecimal. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apAPID |
1.3.6.1.4.1.388.1.1.2.9.1.4 |
AP ID (i.e. BSS ID) of the Known AP in hexadecimal. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apHoppingSeq |
1.3.6.1.4.1.388.1.1.2.9.1.5 |
Hopping Sequence of Known AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apMUs |
1.3.6.1.4.1.388.1.1.2.9.1.6 |
Indicates the number of MUs currently associated with AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apKBOS |
1.3.6.1.4.1.388.1.1.2.9.1.7 |
Kilobytes sent per second by AP on the radio interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apKBIS |
1.3.6.1.4.1.388.1.1.2.9.1.8 |
Kilobytes received per second by AP on the radio
interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apLastRcvd |
1.3.6.1.4.1.388.1.1.2.9.1.9 |
Last communication in seconds with AP. Consistent values
greater than 12 may indicate a communication failure with
AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
apAdrViolations |
1.3.6.1.4.1.388.1.1.2.10.1 |
Indicates the number of Mobile Unit MAC address
violations counted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apTypeViolations |
1.3.6.1.4.1.388.1.1.2.10.2 |
Indicates the number of Ethernet packet type violations
counted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apNbrOfWLAPItfs |
1.3.6.1.4.1.388.1.1.2.11.1 |
Indicates number of WLAP interfaces established. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apWLAPState |
1.3.6.1.4.1.388.1.1.2.11.2 |
Indicates the current WLAP state. The state values and
meanings are as follows :
- During power-up initialization :
Initializing(1)
SendingProbe(2)
SendAssocReq(3)
SendCfgBPDU(4)
WaitForProbe(5)
SendProbeRsp(6)
SendAssocRsp(7)
SendCfgRsp(8)
ReceivedRootRsp(10)
- During WLAP operation :
RootWLAPLost(12)
Disabled(14)
Functional(15)
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
initializing(1), sending-probe(2), send-assoc-req(3), send-cfg-bpdu(4), wait-for-probe(5), send-Probe-rsp(6), send-assoc-rsp(7), send-cfg-rsp(8), received-root-rsp(10), root-wlap-lost(12), disabled(14), functional(15) |
|
apWLAPHopSequence |
1.3.6.1.4.1.388.1.1.2.11.3 |
Indicates the hop sequence of the Root AP followed by
this WLAP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apRootInterface |
1.3.6.1.4.1.388.1.1.2.11.4 |
Indicates the WLAP interface leading to the Root AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apRootWLAPID |
1.3.6.1.4.1.388.1.1.2.11.5 |
Indicates the WLAP ID of the Root AP. It consists of
2 bytes of priority (default is 0x8000) and 6 bytes of
MAC address of the Root AP |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..8) |
|
apRootPathCost |
1.3.6.1.4.1.388.1.1.2.11.6 |
Indicates how many hops away the current WLAP is from
the Root AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apWLAPID |
1.3.6.1.4.1.388.1.1.2.11.7 |
Indicates the WLAP ID of the current WLAP. It consists
of 2 bytes of priority (default is 0x8000) and 6 bytes
MAC address of the current WLAP |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..8) |
|
apWLAPItfTable |
1.3.6.1.4.1.388.1.1.2.11.8 |
A table of wireless AP interfaces information, which
contains four (4) interfaces : Ethernet and three
AP-to-AP interfaces or just all four AP-to-AP
interfaces.
The current number of entries is 4. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApWLAPItfEntry |
|
apWLAPItfEntry |
1.3.6.1.4.1.388.1.1.2.11.8.1 |
An entry in the table of wireless AP interfaces
information.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApWLAPItfEntry |
|
|
apWLAPItfID |
1.3.6.1.4.1.388.1.1.2.11.8.1.1 |
WLAP interface ID. It consists of 1 byte of priority
(default is 0x80) and 1 byte of interface ID. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apWLAPItfAddr |
1.3.6.1.4.1.388.1.1.2.11.8.1.2 |
The MAC address of the associated WLAP on this
interface.
For Ethernet, this is the Bridge Group Address :
01-80-C2-00-00-00.
For AP-to-AP, this is the associated WLAP MAC address. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
apWLAPItfState |
1.3.6.1.4.1.388.1.1.2.11.8.1.3 |
The current state of the Wireless AP interface, ie :
Disabled(1), Listening(2), Learning(3), Forwarding(4), or
Blocking(5). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), listening(2), learning(3), forwarding(4), blocking(5) |
|
apWLAPPathCost |
1.3.6.1.4.1.388.1.1.2.11.8.1.4 |
The cost to be added to the root path cost field in the
config BPDU (Bridge Protocol Data Unit) received on this
interface in order to determine the cost of the path to
the Root AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apDsgnatedRoot |
1.3.6.1.4.1.388.1.1.2.11.8.1.5 |
The unique Root AP ID designated by the Root AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..8) |
|
apDsgnatedCost |
1.3.6.1.4.1.388.1.1.2.11.8.1.6 |
The cost of the path to the Root AP designated by the
Root AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
apDsgnatedWLAP |
1.3.6.1.4.1.388.1.1.2.11.8.1.7 |
The unique WLAP ID designated by the Root AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..8) |
|
apDsgnatedItf |
1.3.6.1.4.1.388.1.1.2.11.8.1.8 |
The WLAP interface ID designated by the Root AP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..2) |
|
apClrAllStatistics |
1.3.6.1.4.1.388.1.1.3.1 |
Clear all the interface statistics (yes = 1, no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apClrMUTable |
1.3.6.1.4.1.388.1.1.3.2 |
Clear the MU Table (yes = 1, no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apClrACL |
1.3.6.1.4.1.388.1.1.3.3 |
Clear the Access Control Table (yes = 1, no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apClrACLRangeTable |
1.3.6.1.4.1.388.1.1.3.4 |
Clear the Access Control Range Table (yes = 1, no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apClrAddrFilterTbl |
1.3.6.1.4.1.388.1.1.3.5 |
Clear the Address Filtering Table (yes = 1, no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apLdACLFrMUList |
1.3.6.1.4.1.388.1.1.3.6 |
Load the Access Control Table from MU Table (yes = 1,
no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apModemDialOut |
1.3.6.1.4.1.388.1.1.3.7 |
Commands the modem to dialout (yes = 1, no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apModemHangUp |
1.3.6.1.4.1.388.1.1.3.8 |
Forces the AP to issue a 'hangup' string to the modem
attached to the serial port (yes = 1, no = 2).
This command is meaningful only if the AP is configured
for a modem connection on the serial port. If there is
no modem or there is no connection, the command will be
ignored. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apUpdateFirmware |
1.3.6.1.4.1.388.1.1.3.9 |
Update the AP firmware through TFTP server. The AP
firmware will be saved in NVRAM (yes = 1, no = 2).
Before issuing this command, set 'apDnLdFileName',
and 'apTFTPServer' to the proper values |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apDnLdFileName |
1.3.6.1.4.1.388.1.1.3.10 |
The name of the file to be downloaded to the AP.
(Including path name and total up to 49 characters.)
Note: IF BOOTP is responded to, that name will take
precedence and overwrite this name. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..50) |
|
apTFTPServer |
1.3.6.1.4.1.388.1.1.3.11 |
The IP address for the TFTP Server. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
apResetAP |
1.3.6.1.4.1.388.1.1.3.12 |
Forces a reset of the AP (yes = 1, no = 2).
Upon reset, the AP clears all the statistics and
restores the last saved configuration information. If
changes are made without being saved, the AP clears
those changes upon reset. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apACLViolations |
1.3.6.1.4.1.388.1.1.4.1 |
Indicates the number of Access Control violations
occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
apSaveConfig |
1.3.6.1.4.1.388.1.1.4.2 |
Saves the current configuration to NVRAM (yes = 1,
no = 2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
apAccCtrlTable |
1.3.6.1.4.1.388.1.1.4.3 |
A table of MAC addresses allowed to associate with the
Access Point.
The maximum number of entries in the table is 128. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApAccCtrlEntry |
|
apAccCtrlEntry |
1.3.6.1.4.1.388.1.1.4.3.1 |
An entry in the table of MAC address Access Control.
A row in this table is created by setting the value of
allowedMU to the MAC address of the MU allowed to
associate with this Access Point.
A row in this table is deleted by setting the value of
allowedMU to '000000000000'. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApAccCtrlEntry |
|
|
allowedIndex |
1.3.6.1.4.1.388.1.1.4.3.1.1 |
Access Control Table index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..128 |
|
allowedMU |
1.3.6.1.4.1.388.1.1.4.3.1.2 |
MU MAC address which is allowed to associate with
this AP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
apACLRangeTable |
1.3.6.1.4.1.388.1.1.4.4 |
A table of Access Control Range, which consists of
eight (8) pairs of low and high MAC addresses.
Any Mobile Unit with the MAC address within the range
is allowed to associate with the Access Point.
The maximum number of entries in the table is 8. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ApACLRangeEntry |
|
apACLRangeEntry |
1.3.6.1.4.1.388.1.1.4.4.1 |
An entry in the table of MAC address Access Control
Range.
A row in this table is created by first setting the
value of lowMacAddr to the lowest MAC address and then
the value of highMacAddr to the highest MAC address of
a group of Mobile Units allowed to associate with this
Access Point. This sequence of setting is very
important, otherwise a wrong result will occur.
A row in this table is deleted by setting the value of
either lowMacAddr or highMacAddr to '000000000000'. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ApACLRangeEntry |
|
|
apACLRangeIndex |
1.3.6.1.4.1.388.1.1.4.4.1.1 |
Access Control Range Table index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..8 |
|
lowMacAddr |
1.3.6.1.4.1.388.1.1.4.4.1.2 |
The lowest Mobile Unit MAC address in the range which
is allowed to be associated with this AP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
highMacAddr |
1.3.6.1.4.1.388.1.1.4.4.1.3 |
The highest Mobile Unit MAC address in the range which
is allowed to be associated with this AP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|