SWITCH-ATM-MIB

File: SWITCH-ATM-MIB.mib (85971 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC TELESYN-ATI-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
IpAddress Integer32 Unsigned32
Gauge32 TEXTUAL-CONVENTION RowStatus
MacAddress DisplayString atmModule

Defined Types

IfIndexOrZero  
An extension of InterfacesIndex to include the value 0. The value 0 may be used to indicate instances where 0, unknown, or all interfaces may apply.
TEXTUAL-CONVENTION    
  Integer32 0..2147483647  

AtmAddress  
ATM Address.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0|20)  

AtmPortIndex  
ATM Port Index.
TEXTUAL-CONVENTION    
  INTEGER 1..10  

AtmVpi  
ATM VPI. This is a constant with a value of 0.
TEXTUAL-CONVENTION    
  INTEGER 0..0  

AtmVci  
ATM VCI.
TEXTUAL-CONVENTION    
  INTEGER 0..1023  

AtmClientVci  
This type restricts VCI values to those not reserved by the ATM Forum.
TEXTUAL-CONVENTION    
  INTEGER 32..1023  

AtmLecIndex  
ATM Lan Emulation Client Index.
TEXTUAL-CONVENTION    
  INTEGER 1..32  

AtmCipIndex  
ATM Classic IP Index.
TEXTUAL-CONVENTION    
  INTEGER 1..16  

AtmAdminStatus  
Admininstrative status codes
TEXTUAL-CONVENTION    
  INTEGER disable(1), enable(2)  

AtmOperStatus  
ATM Operation Status.
TEXTUAL-CONVENTION    
  INTEGER other(1), inactive(2), active(3), loopBack(4)  

AtmConnectionOperStatusCodes  
Virtual Connection operational status.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), up(2), down(3)  

AtmTransmissionTypes  
ATM Transmission types.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), sonetSTS3c(2)  

AtmMediaTypes  
ATM Media Types.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), coaxCable(2), singleModeFiber(3), multiModeFiber(4), utp(5)  

AtmQosClass  
Quality of Service.
TEXTUAL-CONVENTION    
  INTEGER unspecified(1), class1(2), class2(3), class3(4), class4(5)  

AtmClearStats  
Flag to clear the counters to 0. A SNMP Get operation will always return 'noOp'
TEXTUAL-CONVENTION    
  INTEGER noOp(1), clearStats(2)  

AtmxArpEntryType  
Indicates how the ArpEntry was learned or created and whether it is subject to aging other(1) - The entry does not fall into any other category. learnedViaArp(2) - learned from ARP. learnedViaData(3) - learned from observing incoming traffic. staticVolatile(4) - created by management and will not age. It may not survive a system restart. staticNonVolatile(5) - created by management and will not age. It will survive a system restart.
TEXTUAL-CONVENTION    
  INTEGER other(1), learnedViaArp(2), learnedViaData(3), staticVolatile(4), staticNonVolatile(5)  

AtmxVlanRange  
The range of valid vlan numbers.
TEXTUAL-CONVENTION    
  INTEGER 1..65535  

AtmxPortEntry  
SEQUENCE    
  atmxPortIndex AtmPortIndex
  atmxPortDescription DisplayString
  atmxPortTransmissionType AtmTransmissionTypes
  atmxPortMediaType AtmMediaTypes
  atmxPortOperStatus AtmOperStatus
  atmxPortMaxVCCs INTEGER
  atmxPortMaxVciBits INTEGER
  atmxPortAddress AtmAddress
  atmxPortSignalingVersion INTEGER
  atmxPortSignalingVci INTEGER
  atmxPortILMIVci INTEGER
  atmxPortEnableIlmi INTEGER
  atmxPortEnableIlmiPoll INTEGER
  atmxPortEnablePlScramble INTEGER
  atmxPortClock INTEGER
  atmxPortMacAddress MacAddress
  atmxPortAdaptorRamSize INTEGER
  atmxPortIlmiStatus AtmConnectionOperStatusCodes
  atmxPortSignalingStatus AtmConnectionOperStatusCodes
  atmxPortSignalingMode INTEGER

AtmxLecEntry  
SEQUENCE    
  atmxLecIndex AtmLecIndex
  atmxLecDescription DisplayString
  atmxElanName DisplayString
  atmxLecConfigMode INTEGER
  atmxLecServerAddress AtmAddress
  atmxLecUnicastMacAddress MacAddress
  atmxLecMaxUnknownFrameCount INTEGER
  atmxLecMaxArpRetryCount INTEGER
  atmxLecMaxUnknownFrameTime INTEGER
  atmxLecControlTimeout INTEGER
  atmxLecVccTimeout Unsigned32
  atmxLecAgeingTime INTEGER
  atmxLecArpRespTime INTEGER
  atmxLecFlushTimeout INTEGER
  atmxLecVPortNumber INTEGER
  atmxLecProtocolState INTEGER
  atmxLecRowStatus RowStatus
  atmxLecIfIndex IfIndexOrZero
  atmxLecId INTEGER
  atmxLecControlDirectVcc AtmVci
  atmxLecControlDistributeVcc AtmVci
  atmxLecMulticastSendVcc AtmVci
  atmxLecMulticastForwardVcc AtmVci
  atmxLecVlanNumber AtmxVlanRange

AtmxCipEntry  
SEQUENCE    
  atmxCipIndex AtmCipIndex
  atmxCipDescription DisplayString
  atmxCipIPAddress IpAddress
  atmxCipIPSubnetMask IpAddress
  atmxCipConnectionType INTEGER
  atmxCipVci AtmVci
  atmxCipServerAtmAddress AtmAddress
  atmxCipMtuSize INTEGER
  atmxCipIfIndex IfIndexOrZero
  atmxCipProtocolState INTEGER
  atmxCipAdmStatus AtmAdminStatus
  atmxCipOperStatus AtmOperStatus
  atmxCipRowStatus RowStatus
  atmxCipRipMode INTEGER

AtmxCipVciEntry  
SEQUENCE    
  atmxCipVciId AtmClientVci
  atmxCipVciRowStatus RowStatus

AtmxLayerStatsEntry  
SEQUENCE    
  atmxLayerStatsTxCells Counter32
  atmxLayerStatsRxCells Counter32
  atmxLayerStatsTxCellDiscards Counter32
  atmxLayerStatsRxCellDiscards Counter32
  atmxLayerStatsClear AtmClearStats
  atmxLayerStatsClearTime INTEGER

Aal5LayerStatsEntry  
SEQUENCE    
  aal5LayerTxOctets Counter32
  aal5LayerTxCells Counter32
  aal5LayerTxSDUs Counter32
  aal5LayerTxSDUDiscards Counter32
  aal5LayerTxErrors Counter32
  aal5LayerRxOctets Counter32
  aal5LayerRxCells Counter32
  aal5LayerRxSDUs Counter32
  aal5LayerRxSDUDiscards Counter32
  aal5LayerRxErrors Counter32
  aal5LayerRxSarTimeouts Counter32
  aal5LayerRxCrcErrors Counter32
  aal5LayerRxSDUInvalidSz Counter32
  aal5LayerClearStats AtmClearStats
  aal5LayerStatsClearTime INTEGER

AtmxVccStatsEntry  
SEQUENCE    
  atmxVccStatsTxSDUs Counter32
  atmxVccStatsTxCells Counter32
  atmxVccStatsTxOctets Counter32
  atmxVccStatsRxSDUs Counter32
  atmxVccStatsRxCells Counter32
  atmxVccStatsRxOctets Counter32
  atmxVccStatsTxSDUDiscards Counter32
  atmxVccStatsTxErrors Counter32
  atmxVccStatsRxSDUDiscards Counter32
  atmxVccStatsRxErrors Counter32
  atmxVccStatsRxSarTimeouts Counter32
  atmxVccStatsRxCrcErrors Counter32
  atmxVccStatsRxOversizedSdus Counter32
  atmxVccStatsConnCreateTime INTEGER
  atmxVccStatsConnInIdleTime INTEGER
  atmxVccStatsConnOutIdleTime INTEGER
  atmxVccStatsConnModifiedTime INTEGER

AtmxLecStatsEntry  
SEQUENCE    
  atmxLecStatsTxArpReq Counter32
  atmxLecStatsTxArpRsp Counter32
  atmxLecStatsTxControlPkts Counter32
  atmxLecStatsTxUnicastPkts Counter32
  atmxLecStatsTxMulticastPkts Counter32
  atmxLecStatsTxBroadcastPkts Counter32
  atmxLecStatsTxDiscardPkts Counter32
  atmxLecStatsRxArpReq Counter32
  atmxLecStatsRxArpRsp Counter32
  atmxLecStatsRxControlPkts Counter32
  atmxLecStatsRxUnicastPkts Counter32
  atmxLecStatsRxMulticastPkts Counter32
  atmxLecStatsRxBroadcastPkts Counter32
  atmxLecStatsRxDiscardPkts Counter32

AtmxCipStatsEntry  
SEQUENCE    
  atmxCipStatsPktsFromOtherLIS Counter32
  atmxCipStatsTxArpReq Counter32
  atmxCipStatsTxArpRsp Counter32
  atmxCipStatsTxInArpReq Counter32
  atmxCipStatsTxInArpRsp Counter32
  atmxCipStatsTxDiscards Counter32
  atmxCipStatsRxArpReq Counter32
  atmxCipStatsRxArpRsp Counter32
  atmxCipStatsRxInArpReq Counter32
  atmxCipStatsRxInArpRsp Counter32
  atmxCipStatsRxDiscards Counter32

AtmxSscopStatsEntry  
SEQUENCE    
  atmxSscopStatsTxTotalPdus Counter32
  atmxSscopStatsTxDiscardSdus Counter32
  atmxSscopStatsTxDiscardPdus Counter32
  atmxSscopStatsTxErrorPdus Counter32
  atmxSscopStatsTxBufferInUseCtr Counter32
  atmxSscopStatsTxBufferInUseGauge Gauge32
  atmxSscopStatsRxTotalPdus Counter32
  atmxSscopStatsRxDiscardPdus Counter32
  atmxSscopStatsRxErrorPdus Counter32
  atmxSscopStatsRxBufferInUseCtr Counter32
  atmxSscopStatsRxBufferInUseGauge Gauge32

AtmxIlmiStatsEntry  
SEQUENCE    
  atmxIlmiTxPDUs Counter32
  atmxIlmiRxPDUs Counter32
  atmxIlmiRxDiscardPDUs Counter32

AtmxVccEntry  
SEQUENCE    
  atmxVccVpi AtmVpi
  atmxVccVci AtmVci
  atmxVccCircuitType INTEGER
  atmxVccOperStatus AtmConnectionOperStatusCodes
  atmxVccUpTime Unsigned32
  atmxVccTxQosClass AtmQosClass
  atmxVccTxBestEffort INTEGER
  atmxVccTxPeakCellRate INTEGER
  atmxVccRxQosClass AtmQosClass
  atmxVccRxBestEffort INTEGER
  atmxVccRxPeakCellRate INTEGER
  atmxVccRowStatus RowStatus
  atmxVccServiceType INTEGER

AtmxLecArpEntry  
SEQUENCE    
  atmxLecArpMacAddress MacAddress
  atmxLecArpAtmAddress AtmAddress
  atmxLecArpVci AtmVci
  atmxLecArpTimeToLive INTEGER
  atmxLecArpSource AtmxArpEntryType
  atmxLecArpRowStatus RowStatus

AtmxCipArpEntry  
SEQUENCE    
  atmxCipArpIPAddress IpAddress
  atmxCipArpAtmAddress AtmAddress
  atmxCipArpVci AtmClientVci
  atmxCipArpTimeToLive INTEGER
  atmxCipArpSource AtmxArpEntryType
  atmxCipArpRowStatus RowStatus

AtmxPtToPtEntry  
SEQUENCE    
  atmxPtToPtIndex INTEGER
  atmxPtToPtDescription DisplayString
  atmxPtToPtEncap INTEGER
  atmxPtToPtConnType INTEGER
  atmxPtToPtVci AtmClientVci
  atmxPtToPtDestAddr AtmAddress
  atmxPtToPtRowStatus RowStatus
  atmxPtToPtIfIndex IfIndexOrZero
  atmxPtToPtVlanNumber AtmxVlanRange
  atmxPtToPtAdminStatus AtmAdminStatus
  atmxPtToPtOperStatus AtmConnectionOperStatusCodes

AtmxPtToPtStatsEntry  
SEQUENCE    
  atmxPtToPtStatsTotalTxPkts INTEGER
  atmxPtToPtStatsTotalRxPkts INTEGER
  atmxPtToPtStatsTotalTxDiscards INTEGER
  atmxPtToPtStatsTotalRxDiscards INTEGER

AtmxTrunkEntry  
SEQUENCE    
  atmxTrunkIndex INTEGER
  atmxTrunkDescription DisplayString
  atmxTrunkConnType INTEGER
  atmxTrunkVci AtmClientVci
  atmxTrunkDestAddr AtmAddress
  atmxTrunkRowStatus RowStatus
  atmxTrunkAdminStatus AtmAdminStatus
  atmxTrunkOperStatus AtmConnectionOperStatusCodes

AtmxTrunkVlanEntry  
SEQUENCE    
  atmxTrunkVlanNumber AtmxVlanRange
  atmxTrunkVlanIfIndex IfIndexOrZero
  atmxTrunkVlanRowStatus RowStatus

AtmxTrunkStatsEntry  
SEQUENCE    
  atmxTrunkStatsTotalTxPkts INTEGER
  atmxTrunkStatsTotalRxPkts INTEGER
  atmxTrunkStatsTotalTxDiscards INTEGER
  atmxTrunkStatsTotalRxDiscards INTEGER

Defined Values

switchAtmMib 2.1.207.8.9.2.1.1
The MIB module for ATM support. This module is designed with the assumption that only one virtual path identifier (VPI) may be assigned and is usually determined by the underlying software implementation. The VPI is never used as an index in any table in this module.
MODULE-IDENTITY    

atmxPortGroup 2.1.207.8.9.2.1.1.1
OBJECT IDENTIFIER    

atmxLecGroup 2.1.207.8.9.2.1.1.2
OBJECT IDENTIFIER    

atmxCipGroup 2.1.207.8.9.2.1.1.3
OBJECT IDENTIFIER    

atmxLayerStatsGroup 2.1.207.8.9.2.1.1.4
OBJECT IDENTIFIER    

atmxVccStatsGroup 2.1.207.8.9.2.1.1.5
OBJECT IDENTIFIER    

atmxLecStatsGroup 2.1.207.8.9.2.1.1.6
OBJECT IDENTIFIER    

atmxCipStatsGroup 2.1.207.8.9.2.1.1.7
OBJECT IDENTIFIER    

atmxSscopStatsGroup 2.1.207.8.9.2.1.1.8
OBJECT IDENTIFIER    

atmxIlmiStatsGroup 2.1.207.8.9.2.1.1.9
OBJECT IDENTIFIER    

atmxVccGroup 2.1.207.8.9.2.1.1.10
OBJECT IDENTIFIER    

atmxAddressGroup 2.1.207.8.9.2.1.1.11
OBJECT IDENTIFIER    

atmxCipArpGroup 2.1.207.8.9.2.1.1.12
OBJECT IDENTIFIER    

atmxLecArpGroup 2.1.207.8.9.2.1.1.13
OBJECT IDENTIFIER    

atmxPtToPtGroup 2.1.207.8.9.2.1.1.14
OBJECT IDENTIFIER    

atmxTrunkGroup 2.1.207.8.9.2.1.1.15
OBJECT IDENTIFIER    

atmxPortTable 2.1.207.8.9.2.1.1.1.1
A table of port layer status and parameter information for the UNI's physical interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxPortEntry

atmxPortEntry 2.1.207.8.9.2.1.1.1.1.1
An entry in the table, containing information about the physical layer of a UNI interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxPortEntry  

atmxPortIndex 2.1.207.8.9.2.1.1.1.1.1.1
A unique value which identifies this atm submodule port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmPortIndex  

atmxPortDescription 2.1.207.8.9.2.1.1.1.1.1.2
A description for this atm port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxPortTransmissionType 2.1.207.8.9.2.1.1.1.1.1.3
The transmission type of this port. For example, for a port using the Sonet STS-3c physical layer at 155.52 Mbs, this object would have the value 'sonetSTS3c'.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTransmissionTypes  

atmxPortMediaType 2.1.207.8.9.2.1.1.1.1.1.4
The type of media being used on this port. For example for a port using coaxial cable, the object would have the value 'coaxCable'.
Status: current Access: read-only
OBJECT-TYPE    
  AtmMediaTypes  

atmxPortOperStatus 2.1.207.8.9.2.1.1.1.1.1.5
The operational state (i.e., actual) of this port. The ILMI should not alarm on a physical interface when the value of this object is 'outOfService'. This capability is useful if the equipment is to be disconnected or for troubleshooting purposes. A value of 'loopBack' indicates that loopback is in place.
Status: current Access: read-only
OBJECT-TYPE    
  AtmOperStatus  

atmxPortMaxVCCs 2.1.207.8.9.2.1.1.1.1.1.6
The maximum number of VCCs supported on this UNI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1023  

atmxPortMaxVciBits 2.1.207.8.9.2.1.1.1.1.1.7
The number of active VCI bits on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10  

atmxPortAddress 2.1.207.8.9.2.1.1.1.1.1.8
The ATM address assigned to this port. The value of this attribute is normally set via the ILMI. If the ILMI Address registration mib, ATM-FORUM-ADDR-REG, is supported and the the value of atmxPortIlmiStatus is 'up' than atmxPortAddress should have a MAX-ACCESS of read-only.
Status: current Access: read-write
OBJECT-TYPE    
  AtmAddress  

atmxPortSignalingVersion 2.1.207.8.9.2.1.1.1.1.1.9
Version of the ATM forum UNI Signaling.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ver30(1), ver31(2)  

atmxPortSignalingVci 2.1.207.8.9.2.1.1.1.1.1.10
Signaling Vci. ATM Forum has defined VPI/VCI as VPI 0, VCI 5 for signaling.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 5..5  

atmxPortILMIVci 2.1.207.8.9.2.1.1.1.1.1.11
ILMI Vci. ATM Forum has defined the VPI 0, VCI 16 for ILMI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 16..16  

atmxPortEnableIlmi 2.1.207.8.9.2.1.1.1.1.1.12
ILMI Enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxPortEnableIlmiPoll 2.1.207.8.9.2.1.1.1.1.1.13
ILMI Poll Enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxPortEnablePlScramble 2.1.207.8.9.2.1.1.1.1.1.14
Payload Scrambling Enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxPortClock 2.1.207.8.9.2.1.1.1.1.1.15
ATM Port clock mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local(1), loopTimed(2)  

atmxPortMacAddress 2.1.207.8.9.2.1.1.1.1.1.16
ATM Port MAC Address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

atmxPortAdaptorRamSize 2.1.207.8.9.2.1.1.1.1.1.17
Segmentation and reassembly memory size in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmxPortIlmiStatus 2.1.207.8.9.2.1.1.1.1.1.18
ILMI status.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOperStatusCodes  

atmxPortSignalingStatus 2.1.207.8.9.2.1.1.1.1.1.19
Signaling Status.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOperStatusCodes  

atmxPortSignalingMode 2.1.207.8.9.2.1.1.1.1.1.20
If this has the value 'pvc' then signaling, ILMI and ILMI polling will be automatically disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxLecTable 2.1.207.8.9.2.1.1.2.1
A table of LEC status and parameter information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxLecEntry

atmxLecEntry 2.1.207.8.9.2.1.1.2.1.1
An entry in the table, containing information about the indicated LEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxLecEntry  

atmxLecIndex 2.1.207.8.9.2.1.1.2.1.1.1
A unique value which identifies this LEC entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmLecIndex  

atmxLecDescription 2.1.207.8.9.2.1.1.2.1.1.2
A description for this LEC.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxElanName 2.1.207.8.9.2.1.1.2.1.1.3
A Name for the ELAN.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxLecConfigMode 2.1.207.8.9.2.1.1.2.1.1.4
Configuration Mode for this LEC.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

atmxLecServerAddress 2.1.207.8.9.2.1.1.2.1.1.5
ATM Address of the LE Configuration Server if the configuration mode is auto; else, the LE Server ATM Address.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAddress  

atmxLecUnicastMacAddress 2.1.207.8.9.2.1.1.2.1.1.6
The Local Unicast MAC address for this LEC. This is now obsolete because the information can be obtained from the vport entry identified by atmxLecVPortNumber.
Status: obsolete Access: read-only
OBJECT-TYPE    
  MacAddress  

atmxLecMaxUnknownFrameCount 2.1.207.8.9.2.1.1.2.1.1.7
Maximum number of frames to the BUS for a given unicast LAN destination within the Maximum unknown Frame time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..10  

atmxLecMaxArpRetryCount 2.1.207.8.9.2.1.1.2.1.1.8
Maximum number of times LE_ARP_REQUEST will be retried for a given frame's LAN destination.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2  

atmxLecArpRespTime 2.1.207.8.9.2.1.1.2.1.1.9
Maximum time in seconds that the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE cycle to take.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..30  

atmxLecMaxUnknownFrameTime 2.1.207.8.9.2.1.1.2.1.1.10
Time period in seconds for the maximum number of frames that can be sent to the BUS for a given LAN destination.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..60  

atmxLecControlTimeout 2.1.207.8.9.2.1.1.2.1.1.11
Time out period in seconds for timing out most request response control frame interations.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..300  

atmxLecVccTimeout 2.1.207.8.9.2.1.1.2.1.1.12
Maximum in-active time period in seconds a data direct VCC will be active before being released. A value of 0 indicates that it will never be release.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

atmxLecAgeingTime 2.1.207.8.9.2.1.1.2.1.1.13
Maximum time in seconds that an LE client will maintain an entry in its LE-ARP cache in the absence of verification.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..300  

atmxLecFlushTimeout 2.1.207.8.9.2.1.1.2.1.1.14
Time limit in seconds to wait to receive an LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4  

atmxLecVPortNumber 2.1.207.8.9.2.1.1.2.1.1.15
The Virtual port number with which this LEC is associated. If the value of this object is 0, then no virtual port has been assigned and the LEC is not active.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..256  

atmxLecProtocolState 2.1.207.8.9.2.1.1.2.1.1.16
This object contains the LAN emulation protocol state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inActive(0), ctrlDirConReq(1), ctrlDistConRsp(2), mcastSndConReq(3), mcastSndFwdConRsp(4), mcastSndFwdConCfm(5), mcastSndConCfm(6), mcastFwdConRsp(7), busArpReq(8), cfgReq(9), joinReq(10), active(11), cfgDirConReq(12)  

atmxLecRowStatus 2.1.207.8.9.2.1.1.2.1.1.17
This object is used to create and delete entries. Only the values 'active', 'createAndGo', and 'delete are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxLecIfIndex 2.1.207.8.9.2.1.1.2.1.1.18
This object contains the ifIndex of the corresponding entry in the ifTable. If no such entry exists or unknown then value of this object is 0.
Status: current Access: read-only
OBJECT-TYPE    
  IfIndexOrZero  

atmxLecId 2.1.207.8.9.2.1.1.2.1.1.19
A value assigned by the LAN Emulation Service (LES) for the LEC identified by atmLecIndex. The value 0 indicates the LES has not assigned a value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

atmxLecControlDirectVcc 2.1.207.8.9.2.1.1.2.1.1.20
The VCC assigned for the Control Direct connection. The value 0 indicates the VCC is not set.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVci  

atmxLecControlDistributeVcc 2.1.207.8.9.2.1.1.2.1.1.21
The VCC assigned for the Control Distribute connection. The value 0 indicates the VCC is not set.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVci  

atmxLecMulticastSendVcc 2.1.207.8.9.2.1.1.2.1.1.22
The VCC assigned for Multicast send. The value 0 indicates the VCC is not set.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVci  

atmxLecMulticastForwardVcc 2.1.207.8.9.2.1.1.2.1.1.23
The VCC assigned for multicast forwarding. The value 0 indicates the VCC is not set.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVci  

atmxLecVlanNumber 2.1.207.8.9.2.1.1.2.1.1.24
The virtual LAN number to which this LEC is attached. This object is required for row creation and the value of this object must correspond to an existing vLanNumber object in the 'SWITCH-VLAN-MIB.vLanTable'. After a successful row creation, this value may change as a result of moving the virtual port, atmxLecIfIndex, to a different Vlan.
Status: current Access: read-create
OBJECT-TYPE    
  AtmxVlanRange  

atmxCipTable 2.1.207.8.9.2.1.1.3.1
A table of CIP status and parameter information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxCipEntry

atmxCipEntry 2.1.207.8.9.2.1.1.3.1.1
An entry in the table, containing information about the indicated CIP.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxCipEntry  

atmxCipIndex 2.1.207.8.9.2.1.1.3.1.1.1
A unique value which identifies this CIP entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmCipIndex  

atmxCipDescription 2.1.207.8.9.2.1.1.3.1.1.2
A description for this CIP.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxCipIPAddress 2.1.207.8.9.2.1.1.3.1.1.3
The IP address associated with this CIP entity.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

atmxCipIPSubnetMask 2.1.207.8.9.2.1.1.3.1.1.4
The IP subnet mask associated with this CIP entity.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

atmxCipConnectionType 2.1.207.8.9.2.1.1.3.1.1.5
The connection type of this CIP. If during row creation the value of this object is 'pvc', then at least one entry in the atmxCipVciTable is required before atmxCipRowStatus can be set to 'active'. If during row creation the value is 'svc' then atmxCipServerAtmAddress must be set before atmxCipRowStatus can be set to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxCipVci 2.1.207.8.9.2.1.1.3.1.1.6
The virtual channel identifier associated with this CIP, if PVC.
Status: obsolete Access: read-create
OBJECT-TYPE    
  AtmVci  

atmxCipServerAtmAddress 2.1.207.8.9.2.1.1.3.1.1.7
ATM Address of the ARP server for the logical IP subnet, to which this CIP belongs. This object is required if atmxCipConnectionType is 'svc'.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAddress  

atmxCipMtuSize 2.1.207.8.9.2.1.1.3.1.1.8
The maximum size of the transmit or receive SDU size of all connections associated with this CIP entity.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 64..9180  

atmxCipIfIndex 2.1.207.8.9.2.1.1.3.1.1.9
This value of this object identifies the corresponding entry in the ifTable. If this object has the value of 0 then there is no corresponding entry in the ifTable.
Status: current Access: read-only
OBJECT-TYPE    
  IfIndexOrZero  

atmxCipProtocolState 2.1.207.8.9.2.1.1.3.1.1.10
The state of the CIP Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), arpConReq(1), active(2)  

atmxCipAdmStatus 2.1.207.8.9.2.1.1.3.1.1.11
The administrative status of this CIP instance.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAdminStatus  

atmxCipOperStatus 2.1.207.8.9.2.1.1.3.1.1.12
The operational status of this CIP instance.
Status: current Access: read-only
OBJECT-TYPE    
  AtmOperStatus  

atmxCipRowStatus 2.1.207.8.9.2.1.1.3.1.1.13
This object is used to create and delete atmxCipEntry. To create of a logical row, set this object to 'createAndWait'. Before this object can be set to 'active', the objects atmxCipIPAddress, atmxCipIPSubnetMask, atmxCipConnectionType must be set to the appropriate values and at least one entry must be created in the atmxCipVciTable with the same atmxCipIndex value as used with this object instance. When this object is set to 'active', the logical rows in atmxCipVciTable with the same atmxCipIndex value will also be set to 'active'. If this object is set to 'delete', the logical rows in atmxCipVciTable with the same atmxCipIndex value will also be deleted.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxCipRipMode 2.1.207.8.9.2.1.1.3.1.1.14
If the value of this object is 'silent', RIP daemon processes received routing packets and does NOT send routing packets over the interface identified by atmxCipIfIndex. With a value of 'active', RIP sends and receives routing packets. With a value of 'deaf' RIP sends routing packets and does not process recieved packets. With a value of 'inactive' RIP deamon does not send nor receive routing packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER silent(1), active(2), deaf(3), inactive(4)  

atmxCipVciTable 2.1.207.8.9.2.1.1.3.2
A table which contains VCIs associated with each CIP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxCipVciEntry

atmxCipVciEntry 2.1.207.8.9.2.1.1.3.2.1
An entry in the table, identifying each VCI for a CIP.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxCipVciEntry  

atmxCipVciId 2.1.207.8.9.2.1.1.3.2.1.1
The virtual channel identifier associated with this CIP.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmClientVci  

atmxCipVciRowStatus 2.1.207.8.9.2.1.1.3.2.1.2
This object is used to create and delete entries in the atmxCipVciTable. An object instance of this object corresponds to an object instance of atmxCipRowStatus if both objects have the same for atmxCipIndex index value. There may be multiple instances of this object which correspond to the same instance of atmxCipRowStatus. To create a conceptual row in this table and the corresponding object instance atmxCipRowStatus does not exist or has the value 'notReady', the value for atmxCipVciRowStatus in an SNMP Set operation can be only 'createAndWait'. Under these conditions, atmxCipVciRowStatus cannot be set to 'active' but transitions to 'active' as a side effect of an SNMP set operation changing atmxCipRowStatus to 'active'. At least one corresponding instance of atmxCipVciRowStatus must exist before atmxCipRowStatus can transition to 'active'. To create a conceptual row in this table and the corresponding object instance atmxCipRowStatus exists with the value 'active' then the value for atmxCipVciRowStatus may be 'createAndWait' or 'createAndGo'. An SNMP Set operation may not set the value of this object to 'active' unless the the corresponde atmxCipRowStatus has the value 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxLayerStatsTable 2.1.207.8.9.2.1.1.4.1
A table of ATM layer statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxLayerStatsEntry

atmxLayerStatsEntry 2.1.207.8.9.2.1.1.4.1.1
An entry in the table, containing information about the ATM layer statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxLayerStatsEntry  

atmxLayerStatsTxCells 2.1.207.8.9.2.1.1.4.1.1.2
The total number of successfully transmitted cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLayerStatsRxCells 2.1.207.8.9.2.1.1.4.1.1.3
The total number of successfully received cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLayerStatsTxCellDiscards 2.1.207.8.9.2.1.1.4.1.1.4
The total number of transmit cells that are discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLayerStatsRxCellDiscards 2.1.207.8.9.2.1.1.4.1.1.5
The total number of receive cells that are discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLayerStatsClear 2.1.207.8.9.2.1.1.4.1.1.6
When this attribute is set to 'clearStats', the counters for this logical row are reset to 0 and atmxLayerStatsClearTime is reset to 0.
Status: current Access: read-write
OBJECT-TYPE    
  AtmClearStats  

atmxLayerStatsClearTime 2.1.207.8.9.2.1.1.4.1.1.7
Amount of time in seconds that has elapsed since the counters have been cleared.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

aal5LayerStatsTable 2.1.207.8.9.2.1.1.4.2
A table of AAL5 layer statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Aal5LayerStatsEntry

aal5LayerStatsEntry 2.1.207.8.9.2.1.1.4.2.1
An entry in the table, containing information about the AAL5 layer statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  Aal5LayerStatsEntry  

aal5LayerTxOctets 2.1.207.8.9.2.1.1.4.2.1.2
The total number of successfully transmitted octets for all AAL5 connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerTxCells 2.1.207.8.9.2.1.1.4.2.1.3
The total number of successfully transmitted cells for all AAL5 connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerTxSDUs 2.1.207.8.9.2.1.1.4.2.1.4
The total number of successfully transmitted service data units for all AAL5 connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerTxSDUDiscards 2.1.207.8.9.2.1.1.4.2.1.5
The total number of transmit SDUs discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerTxErrors 2.1.207.8.9.2.1.1.4.2.1.6
The total number of transmit SDUs that could not be transmitted due to errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxOctets 2.1.207.8.9.2.1.1.4.2.1.7
The total number of successfully received octets for all AAL5 connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxCells 2.1.207.8.9.2.1.1.4.2.1.8
The total number of successfully received cells for all AAL5 connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxSDUs 2.1.207.8.9.2.1.1.4.2.1.9
The total number of successfully received service data units for all AAL5 connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxSDUDiscards 2.1.207.8.9.2.1.1.4.2.1.10
The total number of received SDUs discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxErrors 2.1.207.8.9.2.1.1.4.2.1.11
The total number of errored SDUs that received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxSarTimeouts 2.1.207.8.9.2.1.1.4.2.1.12
The total number of partially re-assembled SDUs that were discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxCrcErrors 2.1.207.8.9.2.1.1.4.2.1.13
The total number of SDUs that were received with CRC errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerRxSDUInvalidSz 2.1.207.8.9.2.1.1.4.2.1.14
The total number of SDUs discarded because their size exceeded the max SDU size.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

aal5LayerClearStats 2.1.207.8.9.2.1.1.4.2.1.15
When this attribute is set to 'clearStats', the counters for this logical row are reset to 0 and aal5LayerStatsClearTime is reset to 0.
Status: current Access: read-write
OBJECT-TYPE    
  AtmClearStats  

aal5LayerStatsClearTime 2.1.207.8.9.2.1.1.4.2.1.16
Amount of time in seconds that has elapsed since the counters have been reset.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmxVccStatsTable 2.1.207.8.9.2.1.1.5.1
A table of ATM virtual channel connection statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxVccStatsEntry

atmxVccStatsEntry 2.1.207.8.9.2.1.1.5.1.1
An entry in the table, containing information about the ATM virtual channel connection statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxVccStatsEntry  

atmxVccStatsTxSDUs 2.1.207.8.9.2.1.1.5.1.1.3
The total number of transmitted SDU's on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsTxCells 2.1.207.8.9.2.1.1.5.1.1.4
The total number of transmitted cells on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsTxOctets 2.1.207.8.9.2.1.1.5.1.1.5
The total number of transmitted octets on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxSDUs 2.1.207.8.9.2.1.1.5.1.1.6
The total number of received SDU's on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxCells 2.1.207.8.9.2.1.1.5.1.1.7
The total number of received cells on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxOctets 2.1.207.8.9.2.1.1.5.1.1.8
The total number of received octets on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsTxSDUDiscards 2.1.207.8.9.2.1.1.5.1.1.9
The total number of transmit SDUs discarded on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsTxErrors 2.1.207.8.9.2.1.1.5.1.1.10
The total number of transmit SDU errors on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxSDUDiscards 2.1.207.8.9.2.1.1.5.1.1.11
The total number of receive SDU's discarded on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxErrors 2.1.207.8.9.2.1.1.5.1.1.12
The total number of receive SDU's with errors on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxSarTimeouts 2.1.207.8.9.2.1.1.5.1.1.13
The total number of partially re-assembled SDUs that were discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxCrcErrors 2.1.207.8.9.2.1.1.5.1.1.14
The total number of receive SDU's crc errors on this virtual channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsRxOversizedSdus 2.1.207.8.9.2.1.1.5.1.1.15
The total number of receive SDU's that are oversized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccStatsConnCreateTime 2.1.207.8.9.2.1.1.5.1.1.16
Time elapsed in seconds since the connection has been created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmxVccStatsConnInIdleTime 2.1.207.8.9.2.1.1.5.1.1.17
Time that has elapsed in seconds since any traffic has been received on this connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmxVccStatsConnOutIdleTime 2.1.207.8.9.2.1.1.5.1.1.18
Time that has elapsed in seconds since any traffic has been sent out on this connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmxVccStatsConnModifiedTime 2.1.207.8.9.2.1.1.5.1.1.19
Time that has elapsed in seconds since any connection parameters have been modified.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmxLecStatsTable 2.1.207.8.9.2.1.1.6.1
A table of ATM LEC statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxLecStatsEntry

atmxLecStatsEntry 2.1.207.8.9.2.1.1.6.1.1
An entry in the table, containing information about the LEC statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxLecStatsEntry  

atmxLecStatsTxArpReq 2.1.207.8.9.2.1.1.6.1.1.2
Total number of ARP requests transmitted from this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsTxArpRsp 2.1.207.8.9.2.1.1.6.1.1.3
Total number of ARP responses transmitted from this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsTxControlPkts 2.1.207.8.9.2.1.1.6.1.1.4
Total number of control packets transmitted from this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsTxUnicastPkts 2.1.207.8.9.2.1.1.6.1.1.5
Total number of unicast packets transmitted from this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsTxMulticastPkts 2.1.207.8.9.2.1.1.6.1.1.6
Total number of multicast packets transmitted from this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsTxBroadcastPkts 2.1.207.8.9.2.1.1.6.1.1.7
Total number of broadcast packets transmitted from this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsTxDiscardPkts 2.1.207.8.9.2.1.1.6.1.1.8
Total number of transmission packets discarded from this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsRxArpReq 2.1.207.8.9.2.1.1.6.1.1.9
Total number of ARP requests received for this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsRxArpRsp 2.1.207.8.9.2.1.1.6.1.1.10
Total number of ARP responses received for this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsRxControlPkts 2.1.207.8.9.2.1.1.6.1.1.11
Total number of control packets received for this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsRxUnicastPkts 2.1.207.8.9.2.1.1.6.1.1.12
Total number of unicast packets received for this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsRxMulticastPkts 2.1.207.8.9.2.1.1.6.1.1.13
Total number of multicast packets received for this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsRxBroadcastPkts 2.1.207.8.9.2.1.1.6.1.1.14
Total number of broadcast packets received for this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxLecStatsRxDiscardPkts 2.1.207.8.9.2.1.1.6.1.1.15
Total number of discarded packets received for this LEC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsTable 2.1.207.8.9.2.1.1.7.1
A table of ATM CIP statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxCipStatsEntry

atmxCipStatsEntry 2.1.207.8.9.2.1.1.7.1.1
An entry in the table, containing information about the CIP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxCipStatsEntry  

atmxCipStatsPktsFromOtherLIS 2.1.207.8.9.2.1.1.7.1.1.2
Total number of packets received that does not belong to this logical IP subnet.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsTxArpReq 2.1.207.8.9.2.1.1.7.1.1.3
Total number of ARP requests transmitted from this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsTxArpRsp 2.1.207.8.9.2.1.1.7.1.1.4
Total number of ARP responses transmitted from this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsTxInArpReq 2.1.207.8.9.2.1.1.7.1.1.5
Total number of InARP requests transmitted from this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsTxInArpRsp 2.1.207.8.9.2.1.1.7.1.1.6
Total number of InARP responses transmitted from this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsTxDiscards 2.1.207.8.9.2.1.1.7.1.1.7
Total number of packets discarded on transmit from this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsRxArpReq 2.1.207.8.9.2.1.1.7.1.1.8
Total number of ARP requests received for this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsRxArpRsp 2.1.207.8.9.2.1.1.7.1.1.9
Total number of ARP responses received for this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsRxInArpReq 2.1.207.8.9.2.1.1.7.1.1.10
Total number of InARP requests received for this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsRxInArpRsp 2.1.207.8.9.2.1.1.7.1.1.11
Total number of InARP responsese received for this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxCipStatsRxDiscards 2.1.207.8.9.2.1.1.7.1.1.12
Total number of packets discarded on receive for this CIP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsTable 2.1.207.8.9.2.1.1.8.1
A table of ATM Service Specific Connection Oriented Protocol (SSCOP) statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxSscopStatsEntry

atmxSscopStatsEntry 2.1.207.8.9.2.1.1.8.1.1
An entry in the table, containing information about the ATM SSCOP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxSscopStatsEntry  

atmxSscopStatsTxTotalPdus 2.1.207.8.9.2.1.1.8.1.1.1
Total number of transmit PDU's sent without error by SSCOP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsTxDiscardSdus 2.1.207.8.9.2.1.1.8.1.1.2
Total number of transmit SDUs discarded by SSCOP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsTxDiscardPdus 2.1.207.8.9.2.1.1.8.1.1.3
Total number of transmit PDUs discarded by SSCOP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsTxErrorPdus 2.1.207.8.9.2.1.1.8.1.1.4
Total number of transmit PDUs with transmission errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsTxBufferInUseCtr 2.1.207.8.9.2.1.1.8.1.1.5
Transmit buffer in-use counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsTxBufferInUseGauge 2.1.207.8.9.2.1.1.8.1.1.6
Transmit buffer in-use gauge.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

atmxSscopStatsRxTotalPdus 2.1.207.8.9.2.1.1.8.1.1.7
Total number of PDU's received without error by SSCOP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsRxDiscardPdus 2.1.207.8.9.2.1.1.8.1.1.8
Total number of PDUs discarded on receipt by SSCOP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsRxErrorPdus 2.1.207.8.9.2.1.1.8.1.1.9
Total number of received PDUs with reception errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsRxBufferInUseCtr 2.1.207.8.9.2.1.1.8.1.1.10
Receive buffer in-use counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxSscopStatsRxBufferInUseGauge 2.1.207.8.9.2.1.1.8.1.1.11
Receive buffer in-use gauge.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

atmxIlmiStatsTable 2.1.207.8.9.2.1.1.9.1
A table of ATM ILMI statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxIlmiStatsEntry

atmxIlmiStatsEntry 2.1.207.8.9.2.1.1.9.1.1
An entry in the table, containing information about the ATM ILMI statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxIlmiStatsEntry  

atmxIlmiTxPDUs 2.1.207.8.9.2.1.1.9.1.1.2
Total number of transmitted PDUs over the ILMI connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxIlmiRxPDUs 2.1.207.8.9.2.1.1.9.1.1.3
Total number of received PDUs over the ILMI connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxIlmiRxDiscardPDUs 2.1.207.8.9.2.1.1.9.1.1.4
Total number of received PDUs that are received over the ILMI connection and discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

atmxVccTable 2.1.207.8.9.2.1.1.10.1
A table of ATM virtual channel connections status and parameter information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxVccEntry

atmxVccEntry 2.1.207.8.9.2.1.1.10.1.1
An entry in the table, containing information about the ATM virtual channel connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxVccEntry  

atmxVccVpi 2.1.207.8.9.2.1.1.10.1.1.2
The virtual path identifier associated with this virtual connection.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVpi  

atmxVccVci 2.1.207.8.9.2.1.1.10.1.1.3
The virtual channel identifier associated with the virtual connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVci  

atmxVccCircuitType 2.1.207.8.9.2.1.1.10.1.1.4
The virtual connection circuit type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxVccOperStatus 2.1.207.8.9.2.1.1.10.1.1.5
The actual operational status of the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOperStatusCodes  

atmxVccUpTime 2.1.207.8.9.2.1.1.10.1.1.6
The virtual channel connection up time in seconds since atmxVccOperStatus transitioned to the value 'up'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

atmxVccTxQosClass 2.1.207.8.9.2.1.1.10.1.1.7
Transmit Quality of Service for this virtual channel connection.
Status: current Access: read-create
OBJECT-TYPE    
  AtmQosClass  

atmxVccTxBestEffort 2.1.207.8.9.2.1.1.10.1.1.8
Transmit Best Effort Indicator for this virtual channel connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccTxPeakCellRate 2.1.207.8.9.2.1.1.10.1.1.9
Peak Cell Rate for CLP 0+1 in the transmit direction for this virtual channel connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 192..20000  

atmxVccRxQosClass 2.1.207.8.9.2.1.1.10.1.1.10
Receive Quality of Service for this virtual channel connection.
Status: current Access: read-create
OBJECT-TYPE    
  AtmQosClass  

atmxVccRxBestEffort 2.1.207.8.9.2.1.1.10.1.1.11
Receive Best Effort Indicator for this virtual channel connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccRxPeakCellRate 2.1.207.8.9.2.1.1.10.1.1.12
Peak Cell Rate for CLP 0+1 in the receive direction for this virtual channel connection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 192..20000  

atmxVccRowStatus 2.1.207.8.9.2.1.1.10.1.1.13
Only the values 'active', 'createAndGo', and 'delete' are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxVccServiceType 2.1.207.8.9.2.1.1.10.1.1.14
The virtual connection Service type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sscop(1), ilmi(2), lec(3), cip(4), oam(5), pt-pt(6), trunk(7), csr(8)  

atmxLecArpTable 2.1.207.8.9.2.1.1.13.1
A table of ATM address to MAC address information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxLecArpEntry

atmxLecArpEntry 2.1.207.8.9.2.1.1.13.1.1
An entry in the table, containing information about the ATM address.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxLecArpEntry  

atmxLecArpMacAddress 2.1.207.8.9.2.1.1.13.1.1.2
The MAC address for identifying this Arp entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

atmxLecArpAtmAddress 2.1.207.8.9.2.1.1.13.1.1.3
The ATM address for the corresponding MAC addess.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAddress  

atmxLecArpVci 2.1.207.8.9.2.1.1.13.1.1.4
The virtual channel identifier associated with Arp entry.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVci  

atmxLecArpTimeToLive 2.1.207.8.9.2.1.1.13.1.1.5
The address time to live in seconds. The value 0 indicates an infinite time to live.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

atmxLecArpSource 2.1.207.8.9.2.1.1.13.1.1.6
The source of this Arp entry.
Status: current Access: read-only
OBJECT-TYPE    
  AtmxArpEntryType  

atmxLecArpRowStatus 2.1.207.8.9.2.1.1.13.1.1.7
Only the values 'active', 'createAndGo', and 'delete' are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxCipArpTable 2.1.207.8.9.2.1.1.12.1
A table of ATM address to IP address information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxCipArpEntry

atmxCipArpEntry 2.1.207.8.9.2.1.1.12.1.1
An entry in the table, containing information about the ATM address.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxCipArpEntry  

atmxCipArpIPAddress 2.1.207.8.9.2.1.1.12.1.1.2
The IP address for this Arp entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

atmxCipArpAtmAddress 2.1.207.8.9.2.1.1.12.1.1.3
The ATM address for the Arp address.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAddress  

atmxCipArpVci 2.1.207.8.9.2.1.1.12.1.1.4
The virtual channel identifier associated with Arp entry.
Status: current Access: read-create
OBJECT-TYPE    
  AtmClientVci  

atmxCipArpTimeToLive 2.1.207.8.9.2.1.1.12.1.1.5
The Arp Entry time to live in seconds. The value 0 indicates an infinite time to live
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

atmxCipArpSource 2.1.207.8.9.2.1.1.12.1.1.6
The source of this Arp entry.
Status: current Access: read-create
OBJECT-TYPE    
  AtmxArpEntryType  

atmxCipArpRowStatus 2.1.207.8.9.2.1.1.12.1.1.7
Only the values 'active', 'createAndGo', and 'delete' are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxPtToPtTable 2.1.207.8.9.2.1.1.14.1
A table of point to point over ATM.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxPtToPtEntry

atmxPtToPtEntry 2.1.207.8.9.2.1.1.14.1.1
An entry in the table containg information about the point to point connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxPtToPtEntry  

atmxPtToPtIndex 2.1.207.8.9.2.1.1.14.1.1.1
The index which identifies each entry instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

atmxPtToPtDescription 2.1.207.8.9.2.1.1.14.1.1.2
A description of the point to point link.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxPtToPtEncap 2.1.207.8.9.2.1.1.14.1.1.3
The data encapsulation format. 'rfc1483' identifies the format defined in RFC 1483.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER rfc1483(1), private(2)  

atmxPtToPtConnType 2.1.207.8.9.2.1.1.14.1.1.4
The connection type of the point to point link.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxPtToPtVci 2.1.207.8.9.2.1.1.14.1.1.5
The VCI used if atmxPtToPtConnType has the value 'pvc'.
Status: current Access: read-create
OBJECT-TYPE    
  AtmClientVci  

atmxPtToPtDestAddr 2.1.207.8.9.2.1.1.14.1.1.6
The ATM address of the other end point of the connection.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAddress  

atmxPtToPtRowStatus 2.1.207.8.9.2.1.1.14.1.1.7
This object is used to create or delete an entry in the atmxPtToPtTable. Only the values 'active', 'createAndGo', and 'delete' are supported. The objects atmxPtToPtVlanNumber, atmxPtToPtConnType, and atmxPtToPtVci if atmxPtToPtConnType is 'pvc' or atmxPtToPtDestAddr if atmxPtToPtConnType is 'svc' are required for a successful 'createAndGo'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxPtToPtIfIndex 2.1.207.8.9.2.1.1.14.1.1.8
This is the value of ifIndex or 0 if ifIndex is not known.
Status: current Access: read-only
OBJECT-TYPE    
  IfIndexOrZero  

atmxPtToPtVlanNumber 2.1.207.8.9.2.1.1.14.1.1.9
The VLAN which is supported by this point to point link.
Status: current Access: read-create
OBJECT-TYPE    
  AtmxVlanRange  

atmxPtToPtAdminStatus 2.1.207.8.9.2.1.1.14.1.1.10
The administrative status of this point to point instance.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAdminStatus  

atmxPtToPtOperStatus 2.1.207.8.9.2.1.1.14.1.1.11
The operational status of this point to point instance.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOperStatusCodes  

atmxPtToPtStatsTable 2.1.207.8.9.2.1.1.14.2
A table of point to point Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxPtToPtStatsEntry

atmxPtToPtStatsEntry 2.1.207.8.9.2.1.1.14.2.1
An entry in the table containg information about the point to point connection statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxPtToPtStatsEntry  

atmxPtToPtStatsTotalTxPkts 2.1.207.8.9.2.1.1.14.2.1.1
Total Transmission Packets through this Connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmxPtToPtStatsTotalRxPkts 2.1.207.8.9.2.1.1.14.2.1.2
Total Packets Received through this Connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmxPtToPtStatsTotalTxDiscards 2.1.207.8.9.2.1.1.14.2.1.3
Total Transmission packets discarded by this connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmxPtToPtStatsTotalRxDiscards 2.1.207.8.9.2.1.1.14.2.1.4
Total Received packets discarded by this connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmxTrunkTable 2.1.207.8.9.2.1.1.15.1
A table of trunk over ATM.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxTrunkEntry

atmxTrunkEntry 2.1.207.8.9.2.1.1.15.1.1
An entry in the table containg information about the trunk connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxTrunkEntry  

atmxTrunkIndex 2.1.207.8.9.2.1.1.15.1.1.1
The index which identifies each entry instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

atmxTrunkDescription 2.1.207.8.9.2.1.1.15.1.1.2
A description of the trunk link.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxTrunkConnType 2.1.207.8.9.2.1.1.15.1.1.3
The connection type of the trunk link.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxTrunkVci 2.1.207.8.9.2.1.1.15.1.1.4
The VCI used if atmxTrunkConnType has the value 'pvc'.
Status: current Access: read-create
OBJECT-TYPE    
  AtmClientVci  

atmxTrunkDestAddr 2.1.207.8.9.2.1.1.15.1.1.5
The ATM address of the other end point of the connection if atmxTrunkConnType is 'svc'.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAddress  

atmxTrunkRowStatus 2.1.207.8.9.2.1.1.15.1.1.6
This attribute is used to create or delete an entry in the atmxTrunkTable. Only the values 'active', 'createAndGo', and 'delete' are supported. The following objects must exist for a successful create, atmxTrunkConnType and atmxTrunkVci if atmxTrunkConnType has the value 'pvc' or atmxTrunkDestAddr if atmxTrunkConnType has the value 'svc'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxTrunkAdminStatus 2.1.207.8.9.2.1.1.15.1.1.7
The administrative status of this trunk instance.
Status: current Access: read-create
OBJECT-TYPE    
  AtmAdminStatus  

atmxTrunkOperStatus 2.1.207.8.9.2.1.1.15.1.1.8
The operational status of this trunk instance.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOperStatusCodes  

atmxTrunkVlanTable 2.1.207.8.9.2.1.1.15.2
A table containing the list of 1 or more VLan which are trunked over ATM. Creating an entry in this table creates entries in ifTable and SWITCH-VLAN_MIB.vPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxTrunkVlanEntry

atmxTrunkVlanEntry 2.1.207.8.9.2.1.1.15.2.1
An entry in the table identifies each VLAN and the trunk connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxTrunkVlanEntry  

atmxTrunkVlanNumber 2.1.207.8.9.2.1.1.15.2.1.1
This identifies the VLAN whose traffic is carried over the trunk. The value of this object corresponds to vLanNumber defined in the SWITCH-VLAN-MIB module.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxVlanRange  

atmxTrunkVlanIfIndex 2.1.207.8.9.2.1.1.15.2.1.2
This is the value of ifIndex of the Vlan interface.
Status: current Access: read-only
OBJECT-TYPE    
  IfIndexOrZero  

atmxTrunkVlanRowStatus 2.1.207.8.9.2.1.1.15.2.1.3
This attribute is used to create or delete an entry in the atmxTrunkTable. Only the values 'active', 'createAndGo', and 'delete' are supported. The corresponding atmTrunkRowStatus must have the value 'active' before this object may be created.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

atmxTrunkStatsTable 2.1.207.8.9.2.1.1.15.3
A table of trunk statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxTrunkStatsEntry

atmxTrunkStatsEntry 2.1.207.8.9.2.1.1.15.3.1
An entry in the table containg information about the trunk connection statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmxTrunkStatsEntry  

atmxTrunkStatsTotalTxPkts 2.1.207.8.9.2.1.1.15.3.1.1
Total Transmission Packets through this Connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmxTrunkStatsTotalRxPkts 2.1.207.8.9.2.1.1.15.3.1.2
Total Packets Received through this Connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmxTrunkStatsTotalTxDiscards 2.1.207.8.9.2.1.1.15.3.1.3
Total Transmission packets discarded by this connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

atmxTrunkStatsTotalRxDiscards 2.1.207.8.9.2.1.1.15.3.1.4
Total Received packets discarded by this connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER