SUN-T300-MIB

File: SUN-T300-MIB.mib (67607 bytes)

Imported modules

SNMPv2-SMI RFC1155-SMI RFC1213-MIB
RFC-1215 RFC-1212

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY enterprises
IpAddress Counter DisplayString
TRAP-TYPE OBJECT-TYPE

Defined Types

UnitEntry  
SEQUENCE    
  unitIndex INTEGER
  unitId DisplayString
  unitType INTEGER
  unitStandby INTEGER

FruEntry  
SEQUENCE    
  fruIndex INTEGER
  fruId DisplayString
  fruType INTEGER
  fruStatus INTEGER
  fruState INTEGER
  fruVendor DisplayString
  fruModel DisplayString
  fruRevision DisplayString
  fruSerialNo DisplayString
  fruErrors INTEGER

FruDiskEntry  
SEQUENCE    
  fruDiskRole INTEGER
  fruDiskPort1State INTEGER
  fruDiskPort2State INTEGER
  fruDiskCapacity INTEGER
  fruDiskStatusCode DisplayString
  fruDiskVolName DisplayString
  fruDiskTemp INTEGER

FruCtlrEntry  
SEQUENCE    
  fruCtlrCpuDesc DisplayString
  fruCtlrRole INTEGER
  fruCtlrPartnerId DisplayString
  fruCtlrCtState INTEGER
  fruCtlrCacheSize INTEGER
  fruCtlrTemp INTEGER
  fruCtlrMdate DisplayString
  fruCtlrConsoleBaud INTEGER

FruLoopEntry  
SEQUENCE    
  fruLoopMode INTEGER
  fruLoopTemp INTEGER
  fruLoopCable1State INTEGER
  fruLoopCable2State INTEGER
  fruLoopMdate DisplayString

FruPowerEntry  
SEQUENCE    
  fruPowerPowOutput INTEGER
  fruPowerPowSource INTEGER
  fruPowerPowTemp INTEGER
  fruPowerFan1State INTEGER
  fruPowerFan2State INTEGER
  fruPowerBatState INTEGER
  fruPowerBatLife INTEGER
  fruPowerBatUsed INTEGER
  fruPowerPowMdate DisplayString
  fruPowerBatMdate DisplayString

FruMidplaneEntry  
SEQUENCE    
  fruMidplaneMdate DisplayString

VolEntry  
SEQUENCE    
  volIndex INTEGER
  volId DisplayString
  volName DisplayString
  volWWN DisplayString
  volStatus INTEGER
  volCacheMode INTEGER
  volCacheMirror INTEGER
  volCapacity INTEGER
  volArrayWidth INTEGER
  volRaidLevel INTEGER
  volWriteRequests Counter
  volReadRequests Counter
  volBlocksWritten Counter
  volBlocksRead Counter
  volSoftErrors Counter
  volFirmErrors Counter
  volHardErrors Counter
  volCacheWriteHits Counter
  volCacheWriteMisses Counter
  volCacheReadHits Counter
  volCacheReadMisses Counter
  volCacheRmwFlushes Counter
  volCacheReconFlushes Counter
  volCacheStripeFlushes Counter
  volDisabledDisk DisplayString
  volSubstitutedDisk DisplayString
  volOper INTEGER
  volOperProgress INTEGER
  volInitRate INTEGER
  volVerifyRate INTEGER

PortEntry  
SEQUENCE    
  portIndex INTEGER
  portId DisplayString
  portType INTEGER
  portFruId DisplayString
  portWriteRequests Counter
  portReadRequests Counter
  portBlocksWritten Counter
  portBlocksRead Counter
  portSunHost INTEGER
  portWWN DisplayString
  portStatus INTEGER
  portErrors INTEGER

PortFibreEntry  
SEQUENCE    
  portFibreAlpaMode INTEGER
  portFibreAlpa INTEGER

AttachEntry  
SEQUENCE    
  attachIndex INTEGER
  attachLun INTEGER
  attachMode INTEGER
  attachVolId DisplayString
  attachVolName DisplayString
  attachVolOwner DisplayString

LoopEntry  
SEQUENCE    
  loopIndex INTEGER
  loopId DisplayString
  loopStatus INTEGER
  loopMux INTEGER

Defined Values

t300 1.3.6.1.4.1.42.2.28.2
The MIB module for Sun StorEdge T300
MODULE-IDENTITY    

sun 1.3.6.1.4.1.42
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.42.2
OBJECT IDENTIFIER    

storage-subsystem 1.3.6.1.4.1.42.2.28
OBJECT IDENTIFIER    

t300Reg 1.3.6.1.4.1.42.2.28.2.1
OBJECT IDENTIFIER    

t300Purple1 1.3.6.1.4.1.42.2.28.2.1.1
Purple 1 Storage Array
Status: current Access: read-only
OBJECT-IDENTITY    

t300Objs 1.3.6.1.4.1.42.2.28.2.2
OBJECT IDENTIFIER    

t300SystemObjs 1.3.6.1.4.1.42.2.28.2.2.1
OBJECT IDENTIFIER    

t300UnitObjs 1.3.6.1.4.1.42.2.28.2.2.2
OBJECT IDENTIFIER    

t300FruObjs 1.3.6.1.4.1.42.2.28.2.2.3
OBJECT IDENTIFIER    

t300VolumeObjs 1.3.6.1.4.1.42.2.28.2.2.4
OBJECT IDENTIFIER    

t300PortObjs 1.3.6.1.4.1.42.2.28.2.2.5
OBJECT IDENTIFIER    

t300AttachObjs 1.3.6.1.4.1.42.2.28.2.2.6
OBJECT IDENTIFIER    

t300LoopObjs 1.3.6.1.4.1.42.2.28.2.2.7
OBJECT IDENTIFIER    

t300LogObjs 1.3.6.1.4.1.42.2.28.2.2.8
OBJECT IDENTIFIER    

t300OndgObjs 1.3.6.1.4.1.42.2.28.2.2.9
OBJECT IDENTIFIER    

t300Events 1.3.6.1.4.1.42.2.28.2.3
OBJECT IDENTIFIER    

t300EventsV2 1.3.6.1.4.1.42.2.28.2.3.0
OBJECT IDENTIFIER    

sysId 1.3.6.1.4.1.42.2.28.2.2.1.1
The system name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysVendor 1.3.6.1.4.1.42.2.28.2.2.1.2
The system vendor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysModel 1.3.6.1.4.1.42.2.28.2.2.1.3
The system model.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysRevision 1.3.6.1.4.1.42.2.28.2.2.1.4
The system firmware revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysStripeUnitSize 1.3.6.1.4.1.42.2.28.2.2.1.5
The current system stripe unit size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysCacheMode 1.3.6.1.4.1.42.2.28.2.2.1.6
The current system buffer cache mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), writeThrough(2), writeBehind(3), auto(4)  

sysCacheMirror 1.3.6.1.4.1.42.2.28.2.2.1.7
The current system buffer cache mirror mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), auto(2)  

sysAutoDisable 1.3.6.1.4.1.42.2.28.2.2.1.8
The current system auto-disable/reconstruct policy.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER none(1), disableOnly(2), disableRecon(3), reconOnly(4)  

sysMpSupport 1.3.6.1.4.1.42.2.28.2.2.1.9
The current multi-pathing support mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), readWrite(2), mpxio(3), std(4)  

sysReadAhead 1.3.6.1.4.1.42.2.28.2.2.1.10
The number of consecutive contiguous read commands received before triggering read-ahead.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

sysReconRate 1.3.6.1.4.1.42.2.28.2.2.1.11
A value controlling the amount of bandwidth allocated to disk reconstruction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3)  

sysOndgMode 1.3.6.1.4.1.42.2.28.2.2.1.12
The current on-line loop diagnostic mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), passive(2), active(3)  

sysOndgTimeslice 1.3.6.1.4.1.42.2.28.2.2.1.13
The time-slice in seconds devoted to normal I/O between loop diagnostic data pattern I/O.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysIdleDiskTimeout 1.3.6.1.4.1.42.2.28.2.2.1.14
The number of hours (1-24) that a disk is permitted to be idle before the system automatically performs a seek on that disk.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

sysFruRemovalShutdown 1.3.6.1.4.1.42.2.28.2.2.1.15
The number of seconds remaining before the system automatically shuts down due to a FRU being removed and not replaced.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysBootMode 1.3.6.1.4.1.42.2.28.2.2.1.16
The current system boot mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), auto(2), tftp(3)  

sysBootDelay 1.3.6.1.4.1.42.2.28.2.2.1.17
A time delay in seconds during which time a user could strike a key at the system console to interrupt EPROM boot process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSpinDelay 1.3.6.1.4.1.42.2.28.2.2.1.18
Not in use.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

sysTftpHost 1.3.6.1.4.1.42.2.28.2.2.1.19
When boot mode is 'tftp', specifies the IP address of the tftp server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sysTftpFile 1.3.6.1.4.1.42.2.28.2.2.1.20
When boot mode is 'tftp', specifies the file name to read from the tftp server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysIpAddr 1.3.6.1.4.1.42.2.28.2.2.1.21
The IP address of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sysSubNet 1.3.6.1.4.1.42.2.28.2.2.1.22
The subnet mask of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sysGateway 1.3.6.1.4.1.42.2.28.2.2.1.23
The default gateway IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sysWriteRequests 1.3.6.1.4.1.42.2.28.2.2.1.24
The current number of write requests received from all host ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysReadRequests 1.3.6.1.4.1.42.2.28.2.2.1.25
The current number of read requests received from all host ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysBlocksWritten 1.3.6.1.4.1.42.2.28.2.2.1.26
The current number of blocks written (received from) all host ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysBlocksRead 1.3.6.1.4.1.42.2.28.2.2.1.27
The current number of blocks read (transmitted to) all host ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysCacheWriteHits 1.3.6.1.4.1.42.2.28.2.2.1.28
The current number of blocks in the cache re-written before the previous contents have been written to disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysCacheWriteMisses 1.3.6.1.4.1.42.2.28.2.2.1.29
The current number of new blocks written to the cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysCacheReadHits 1.3.6.1.4.1.42.2.28.2.2.1.30
The current number of blocks read from cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysCacheReadMisses 1.3.6.1.4.1.42.2.28.2.2.1.31
The current number of blocks read from disk into the cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysCacheRmwFlushes 1.3.6.1.4.1.42.2.28.2.2.1.32
The current number of read-modify-write stripe operations executed by cache flush.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysCacheReconFlushes 1.3.6.1.4.1.42.2.28.2.2.1.33
The current number of reconstruct-write stripe operations executed by cache flush.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysCacheStripeFlushes 1.3.6.1.4.1.42.2.28.2.2.1.34
The current number of strip-write stripe operations executed by cache flush.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysTimezone 1.3.6.1.4.1.42.2.28.2.2.1.35
Specifies the timezone offset, the difference between local time and universal time (UTC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysDate 1.3.6.1.4.1.42.2.28.2.2.1.36
A string of the form 'YYYYMMDD'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysTime 1.3.6.1.4.1.42.2.28.2.2.1.37
A string of the form 'HHMMSS'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysRootSession 1.3.6.1.4.1.42.2.28.2.2.1.38
Not in use.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

sysGuestSession 1.3.6.1.4.1.42.2.28.2.2.1.39
Not in use.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

sysLastMessage 1.3.6.1.4.1.42.2.28.2.2.1.40
Last syslog message. Used for Trap only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sysRarpEnabled 1.3.6.1.4.1.42.2.28.2.2.1.41
A flag indicating whether RARP protocol is used to obtain the system IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sysLoop1Split 1.3.6.1.4.1.42.2.28.2.2.1.42
A flag indicating whether Loop 1 can be split into two segments.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), auto(2)  

sysLastRestart 1.3.6.1.4.1.42.2.28.2.2.1.43
The date and time of the last system restart.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysCtime 1.3.6.1.4.1.42.2.28.2.2.1.44
The current date and time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

sysHasVolumes 1.3.6.1.4.1.42.2.28.2.2.1.45
A flag indicating whether or not there are any currently created volumes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

unitCount 1.3.6.1.4.1.42.2.28.2.2.2.1
The number of units in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

unitTable 1.3.6.1.4.1.42.2.28.2.2.2.2
A table of unitEntrys
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UnitEntry

unitEntry 1.3.6.1.4.1.42.2.28.2.2.2.2.1
An entry in the unitTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UnitEntry  

unitIndex 1.3.6.1.4.1.42.2.28.2.2.2.2.1.1
A number referring to a specific unit in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

unitId 1.3.6.1.4.1.42.2.28.2.2.2.2.1.2
The unit id string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

unitType 1.3.6.1.4.1.42.2.28.2.2.2.2.1.3
The unit type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER controller(1), expansion(2)  

unitStandby 1.3.6.1.4.1.42.2.28.2.2.2.2.1.4
A flag indicating whether drive 9 in the unit is a standby.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

fruCount 1.3.6.1.4.1.42.2.28.2.2.3.1
The total number of FRU's in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruTable 1.3.6.1.4.1.42.2.28.2.2.3.2
A table of fruEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FruEntry

fruEntry 1.3.6.1.4.1.42.2.28.2.2.3.2.1
An entry in the fruTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FruEntry  

fruIndex 1.3.6.1.4.1.42.2.28.2.2.3.2.1.1
A number referring to a specific FRU in the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruId 1.3.6.1.4.1.42.2.28.2.2.3.2.1.2
The FRU id string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruType 1.3.6.1.4.1.42.2.28.2.2.3.2.1.3
The FRU type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER diskDrive(1), controllerCard(2), loopCard(3), powerUnit(4), midplane(5)  

fruStatus 1.3.6.1.4.1.42.2.28.2.2.3.2.1.4
The FRU status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notInstalled(1), fault(2), ready(3), offline(4), booting(5)  

fruState 1.3.6.1.4.1.42.2.28.2.2.3.2.1.5
The FRU state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), substituted(3), missing(4)  

fruVendor 1.3.6.1.4.1.42.2.28.2.2.3.2.1.6
The FRU vendor id string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruModel 1.3.6.1.4.1.42.2.28.2.2.3.2.1.7
The FRU model id string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruRevision 1.3.6.1.4.1.42.2.28.2.2.3.2.1.8
The FRU revision string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruSerialNo 1.3.6.1.4.1.42.2.28.2.2.3.2.1.9
The FRU serial number string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruErrors 1.3.6.1.4.1.42.2.28.2.2.3.2.1.10
Not currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruDiskCount 1.3.6.1.4.1.42.2.28.2.2.3.3
The number of disk FRUs in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruDiskTable 1.3.6.1.4.1.42.2.28.2.2.3.4
A table of fruDiskEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FruDiskEntry

fruDiskEntry 1.3.6.1.4.1.42.2.28.2.2.3.4.1
An entry on the fruDiskTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FruDiskEntry  

fruDiskRole 1.3.6.1.4.1.42.2.28.2.2.3.4.1.1
The operational role of the disk FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unassigned(1), dataDisk(2), standbyDisk(3)  

fruDiskPort1State 1.3.6.1.4.1.42.2.28.2.2.3.4.1.2
The status of the disk FRU via the disk's interface port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), notReady(2), bypass(3), unknown(4)  

fruDiskPort2State 1.3.6.1.4.1.42.2.28.2.2.3.4.1.3
The status of the disk FRU via the disk's interface port 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), notReady(2), bypass(3), unknown(4)  

fruDiskCapacity 1.3.6.1.4.1.42.2.28.2.2.3.4.1.4
The number of bytes/1,000,000 of storage on the disk FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruDiskStatusCode 1.3.6.1.4.1.42.2.28.2.2.3.4.1.5
An ascii status code indicating the current state of the disk drive. 0 - Good drive, good sys area. 2 - Unable to open the drive. 3 - Indicates good drive, but not in any volume. 4 - Temp state of drive before disable occurs. 7 - Drive is good bug has bad sys area. 9 - Drive is bypassed or does not exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruDiskVolName 1.3.6.1.4.1.42.2.28.2.2.3.4.1.6
The name string of the volume containing this disk FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruDiskTemp 1.3.6.1.4.1.42.2.28.2.2.3.4.1.7
The temperature of the disk FRU (reported by the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruCtlrCount 1.3.6.1.4.1.42.2.28.2.2.3.5
The number of controllers in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruCtlrTable 1.3.6.1.4.1.42.2.28.2.2.3.6
A table of fruCtlrEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FruCtlrEntry

fruCtlrEntry 1.3.6.1.4.1.42.2.28.2.2.3.6.1
An entry in the fruCtlrTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FruCtlrEntry  

fruCtlrCpuDesc 1.3.6.1.4.1.42.2.28.2.2.3.6.1.1
A description of the controller CPU type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruCtlrRole 1.3.6.1.4.1.42.2.28.2.2.3.6.1.2
The current operational role of this controller FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), alternateMaster(2), slave(3)  

fruCtlrPartnerId 1.3.6.1.4.1.42.2.28.2.2.3.6.1.3
In a dual controller system, the partner controller's FRU id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruCtlrCtState 1.3.6.1.4.1.42.2.28.2.2.3.6.1.4
The current state of the controller FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER expansionUnit(1), booting(2), online(3), disabled(4), disabling(5), reset(6), resetting(7), reconfig(8), hotPlug(9), virtual(10)  

fruCtlrCacheSize 1.3.6.1.4.1.42.2.28.2.2.3.6.1.5
The cache size in bytes/1,000,000.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruCtlrTemp 1.3.6.1.4.1.42.2.28.2.2.3.6.1.6
The temperature of the controller card FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruCtlrMdate 1.3.6.1.4.1.42.2.28.2.2.3.6.1.7
The date of the controller card's manufacture week.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruCtlrConsoleBaud 1.3.6.1.4.1.42.2.28.2.2.3.6.1.8
The controller FRU's console baud.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruLoopCount 1.3.6.1.4.1.42.2.28.2.2.3.7
The number of loop card FRUs in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruLoopTable 1.3.6.1.4.1.42.2.28.2.2.3.8
A table of fruLoopEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FruLoopEntry

fruLoopEntry 1.3.6.1.4.1.42.2.28.2.2.3.8.1
An entry in the fruLoopTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FruLoopEntry  

fruLoopMode 1.3.6.1.4.1.42.2.28.2.2.3.8.1.1
The current operational mode of the loop card FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

fruLoopTemp 1.3.6.1.4.1.42.2.28.2.2.3.8.1.2
The temperature of the loop card FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruLoopCable1State 1.3.6.1.4.1.42.2.28.2.2.3.8.1.3
Indicates the presence of cable 1 on the loop card FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notInstalled(1), installed(2)  

fruLoopCable2State 1.3.6.1.4.1.42.2.28.2.2.3.8.1.4
Indicates the presence of cable 2 on the loop card FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notInstalled(1), installed(2)  

fruLoopMdate 1.3.6.1.4.1.42.2.28.2.2.3.8.1.5
The date of the loop card's manufacture week.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruPowerCount 1.3.6.1.4.1.42.2.28.2.2.3.9
The number of power/cooling FRUs in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruPowerTable 1.3.6.1.4.1.42.2.28.2.2.3.10
A table of fruPowerEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FruPowerEntry

fruPowerEntry 1.3.6.1.4.1.42.2.28.2.2.3.10.1
An entry in the fruPowerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FruPowerEntry  

fruPowerPowOutput 1.3.6.1.4.1.42.2.28.2.2.3.10.1.1
The current power output state of the power/cooling FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), normal(2), fault(3)  

fruPowerPowSource 1.3.6.1.4.1.42.2.28.2.2.3.10.1.2
The current power input source of the power/cooling FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER line(1), battery(2), unknown(3), none(4)  

fruPowerPowTemp 1.3.6.1.4.1.42.2.28.2.2.3.10.1.3
The current power temperature state of the power/cooling FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), overTemp(2), unknown(3), none(4)  

fruPowerFan1State 1.3.6.1.4.1.42.2.28.2.2.3.10.1.4
The current state of fan 1 in the power/cooling FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fault(2), missing(3)  

fruPowerFan2State 1.3.6.1.4.1.42.2.28.2.2.3.10.1.5
The current state of fan 2 in the power/cooling FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fault(2), missing(3)  

fruPowerBatState 1.3.6.1.4.1.42.2.28.2.2.3.10.1.6
The current charge state of the battery in the power/cooling FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notInstalled(1), normal(2), fault(3), refreshing(4), unknown(5)  

fruPowerBatLife 1.3.6.1.4.1.42.2.28.2.2.3.10.1.7
The expected life of the battery within the power/cooling FRU (in hours).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruPowerBatUsed 1.3.6.1.4.1.42.2.28.2.2.3.10.1.8
The number of hours of life used by the battery within the power/cooling FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruPowerPowMdate 1.3.6.1.4.1.42.2.28.2.2.3.10.1.9
The date of the power/cooling unit's manufacture week.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruPowerBatMdate 1.3.6.1.4.1.42.2.28.2.2.3.10.1.10
The date of the battery's manufacture week.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fruMidplaneCount 1.3.6.1.4.1.42.2.28.2.2.3.11
The number of midplane FRUs in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fruMidplaneTable 1.3.6.1.4.1.42.2.28.2.2.3.12
A table of fruMidplaneEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FruMidplaneEntry

fruMidplaneEntry 1.3.6.1.4.1.42.2.28.2.2.3.12.1
An entry in the fruMidplaneTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FruMidplaneEntry  

fruMidplaneMdate 1.3.6.1.4.1.42.2.28.2.2.3.12.1.1
The date of the midplane's manufacture week.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

volCount 1.3.6.1.4.1.42.2.28.2.2.4.1
The number of volumes created in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volTable 1.3.6.1.4.1.42.2.28.2.2.4.2
A table of volEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VolEntry

volEntry 1.3.6.1.4.1.42.2.28.2.2.4.2.1
An entry in volTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VolEntry  

volIndex 1.3.6.1.4.1.42.2.28.2.2.4.2.1.1
A number referring to a specific volume in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volId 1.3.6.1.4.1.42.2.28.2.2.4.2.1.2
The volume id string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

volName 1.3.6.1.4.1.42.2.28.2.2.4.2.1.3
A user-writable volume name string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

volWWN 1.3.6.1.4.1.42.2.28.2.2.4.2.1.4
The volume World Wide Name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

volStatus 1.3.6.1.4.1.42.2.28.2.2.4.2.1.5
The current volume status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER deleted(1), uninitialized(2), unmounted(3), mounted(4)  

volCacheMode 1.3.6.1.4.1.42.2.28.2.2.4.2.1.6
The current buffer cache mode in effect for this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), writeThrough(2), writeBehind(3), auto(4)  

volCacheMirror 1.3.6.1.4.1.42.2.28.2.2.4.2.1.7
The current buffer cache mirror mode in effect for this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

volCapacity 1.3.6.1.4.1.42.2.28.2.2.4.2.1.8
The number of bytes/1,000,000 of user storage in the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volArrayWidth 1.3.6.1.4.1.42.2.28.2.2.4.2.1.9
The number of drives in the volume (not including the standby drive).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volRaidLevel 1.3.6.1.4.1.42.2.28.2.2.4.2.1.10
The RAID organization of the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER raid0(1), raid1(2), raid5(3)  

volWriteRequests 1.3.6.1.4.1.42.2.28.2.2.4.2.1.11
The current number of write requests received for this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volReadRequests 1.3.6.1.4.1.42.2.28.2.2.4.2.1.12
The current number of read requests received for this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volBlocksWritten 1.3.6.1.4.1.42.2.28.2.2.4.2.1.13
The current number of blocks written (received for) this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volBlocksRead 1.3.6.1.4.1.42.2.28.2.2.4.2.1.14
The current number of blocks read (transmitted for) this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volSoftErrors 1.3.6.1.4.1.42.2.28.2.2.4.2.1.15
The number of soft errors on this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volFirmErrors 1.3.6.1.4.1.42.2.28.2.2.4.2.1.16
The number of firm errors on this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volHardErrors 1.3.6.1.4.1.42.2.28.2.2.4.2.1.17
The number of hard errors on this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volCacheWriteHits 1.3.6.1.4.1.42.2.28.2.2.4.2.1.18
The current number of blocks in the cache re-written to this volume before the previous contents have been written to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volCacheWriteMisses 1.3.6.1.4.1.42.2.28.2.2.4.2.1.19
The current number of blocks read from the cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volCacheReadHits 1.3.6.1.4.1.42.2.28.2.2.4.2.1.20
The current number of blocks read from cache by this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volCacheReadMisses 1.3.6.1.4.1.42.2.28.2.2.4.2.1.21
The current number of blocks read from this volume to the cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volCacheRmwFlushes 1.3.6.1.4.1.42.2.28.2.2.4.2.1.22
The current number of read-modify-write stripe operations executed by cache flush to this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volCacheReconFlushes 1.3.6.1.4.1.42.2.28.2.2.4.2.1.23
The current number of reconstruct-write stripe operations executed by cache flush to this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volCacheStripeFlushes 1.3.6.1.4.1.42.2.28.2.2.4.2.1.24
The current number of stripe-write operations executed by cache flush to this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

volDisabledDisk 1.3.6.1.4.1.42.2.28.2.2.4.2.1.25
The FRU id string of the disabled disk in the volume. No value if there is none.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

volSubstitutedDisk 1.3.6.1.4.1.42.2.28.2.2.4.2.1.26
The FRU id string of the substituted disk in the volume. No value if there is none.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

volOper 1.3.6.1.4.1.42.2.28.2.2.4.2.1.27
The current volume operation in progress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), reconstructing(2), reconstructingToStandby(3), copyingFromStandby(4), copyingToStandby(5), initializing(6), verifying(7)  

volOperProgress 1.3.6.1.4.1.42.2.28.2.2.4.2.1.28
The current volume operation progress expressed as a percentage of completion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volInitRate 1.3.6.1.4.1.42.2.28.2.2.4.2.1.29
The current volume initialize rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volVerifyRate 1.3.6.1.4.1.42.2.28.2.2.4.2.1.30
The current volume verify rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portCount 1.3.6.1.4.1.42.2.28.2.2.5.1
The number of ports in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portTable 1.3.6.1.4.1.42.2.28.2.2.5.2
A table of portEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.42.2.28.2.2.5.2.1
An entry in portTable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portIndex 1.3.6.1.4.1.42.2.28.2.2.5.2.1.1
A number referring to a specific port in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portId 1.3.6.1.4.1.42.2.28.2.2.5.2.1.2
The port id string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

portType 1.3.6.1.4.1.42.2.28.2.2.5.2.1.3
The current port type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ultraScsi(1), fibreChannel(2)  

portFruId 1.3.6.1.4.1.42.2.28.2.2.5.2.1.4
The controller FRU id string which contains this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

portWriteRequests 1.3.6.1.4.1.42.2.28.2.2.5.2.1.5
The current number of write requests received from this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portReadRequests 1.3.6.1.4.1.42.2.28.2.2.5.2.1.6
The current number of read requests received from this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portBlocksWritten 1.3.6.1.4.1.42.2.28.2.2.5.2.1.7
The current number of blocks written (received from) this host port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portBlocksRead 1.3.6.1.4.1.42.2.28.2.2.5.2.1.8
The current number of blocks read (transmitted to) this host port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portSunHost 1.3.6.1.4.1.42.2.28.2.2.5.2.1.9
A flag indicating whether this port is connected to a Sun host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

portWWN 1.3.6.1.4.1.42.2.28.2.2.5.2.1.10
The port World Wide Name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..136)  

portStatus 1.3.6.1.4.1.42.2.28.2.2.5.2.1.11
The current port status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER offline(1), online(2)  

portErrors 1.3.6.1.4.1.42.2.28.2.2.5.2.1.12
Not currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portFibreCount 1.3.6.1.4.1.42.2.28.2.2.5.3
The number of Fibre Channel ports in this unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portFibreTable 1.3.6.1.4.1.42.2.28.2.2.5.4
A table of portEntrys.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortFibreEntry

portFibreEntry 1.3.6.1.4.1.42.2.28.2.2.5.4.1
An entry in the portFibreTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortFibreEntry  

portFibreAlpaMode 1.3.6.1.4.1.42.2.28.2.2.5.4.1.1
The ALPA mode of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hard(1), soft(2)  

portFibreAlpa 1.3.6.1.4.1.42.2.28.2.2.5.4.1.2
The ALPA of the port when the ALPA mode is 'hard'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

attachCount 1.3.6.1.4.1.42.2.28.2.2.6.1
The number of active lun attachments in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

attachTable 1.3.6.1.4.1.42.2.28.2.2.6.2
A table of attachEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AttachEntry

attachEntry 1.3.6.1.4.1.42.2.28.2.2.6.2.1
An entry in the attachTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AttachEntry  

attachIndex 1.3.6.1.4.1.42.2.28.2.2.6.2.1.1
A number referring to a specific active lun attachment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

attachLun 1.3.6.1.4.1.42.2.28.2.2.6.2.1.2
The lun number assigned to this attachment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

attachMode 1.3.6.1.4.1.42.2.28.2.2.6.2.1.3
The mode of this attachment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), failover(3)  

attachVolId 1.3.6.1.4.1.42.2.28.2.2.6.2.1.4
The volume id string of the volume associated with this attachment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

attachVolName 1.3.6.1.4.1.42.2.28.2.2.6.2.1.5
The volume name string of the volume associated with this attachment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

attachVolOwner 1.3.6.1.4.1.42.2.28.2.2.6.2.1.6
The unit id of the owner of the volume associated with this attachment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

loopCount 1.3.6.1.4.1.42.2.28.2.2.7.1
The number of back-end loops in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

loopTable 1.3.6.1.4.1.42.2.28.2.2.7.2
A table of loopEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoopEntry

loopEntry 1.3.6.1.4.1.42.2.28.2.2.7.2.1
An entry in loopTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LoopEntry  

loopIndex 1.3.6.1.4.1.42.2.28.2.2.7.2.1.1
A number referring to a specific back-end loop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

loopId 1.3.6.1.4.1.42.2.28.2.2.7.2.1.2
The loop id string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

loopStatus 1.3.6.1.4.1.42.2.28.2.2.7.2.1.3
The current loop status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER available(1), reserved(2)  

loopMux 1.3.6.1.4.1.42.2.28.2.2.7.2.1.4
The current loop configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(1), top(2), bottom(3), middle(4)  

logStatus 1.3.6.1.4.1.42.2.28.2.2.8.1
A flag indicating whether syslogd is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

logTo 1.3.6.1.4.1.42.2.28.2.2.8.2
Indicates system log messaging routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

logFile 1.3.6.1.4.1.42.2.28.2.2.8.3
The name of the log file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

logLevel 1.3.6.1.4.1.42.2.28.2.2.8.4
Filters generation of system messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none-0(1), error-1(2), warning-2(3), notice-3(4), all-4(5)  

logPort 1.3.6.1.4.1.42.2.28.2.2.8.5
The UDP port to use when forwarding syslogd messages to other hosts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ondgOper 1.3.6.1.4.1.42.2.28.2.2.9.1
The current back-end loop diagnostic operation in progress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER test(1), fastTest(2), find(3), fastFind(4), healthCheck(5)  

ondgOperPending 1.3.6.1.4.1.42.2.28.2.2.9.2
Specifies whether an ONDG operation is in progress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ondgOperProgress 1.3.6.1.4.1.42.2.28.2.2.9.3
The current back-end loop diagnostic operation progress expressed as a percentage of completion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ondgError 1.3.6.1.4.1.42.2.28.2.2.9.4
A string representing the completion status of the last ondg method invoked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

ondgId 1.3.6.1.4.1.42.2.28.2.2.9.5
The unique sequence number for each OFDG test run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysMessage 1
Trap for sysLastMessage (last syslog message).
TRAP-TYPE