SUN-SNMP-NETRA-CT-RSC-MIB

File: SUN-SNMP-NETRA-CT-RSC-MIB.mib (38327 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
NOTIFICATION-TYPE DisplayString MacAddress
enterprises

Defined Types

DateAndTime  
OCTET STRING Size(11)    

NetraCtRscPowerSupplyEntry  
SEQUENCE    
  netraCtRscPowerSupplyIndex INTEGER
  netraCtRscPowerSupplyPresent INTEGER
  netraCtRscPowerSupplyOperState INTEGER
  netraCtRscPowerSupplyAdminState INTEGER

NetraCtRscAlarmEntry  
SEQUENCE    
  netraCtRscAlarmIndex INTEGER
  netraCtRscAlarmID INTEGER
  netraCtRscAlarmOperState INTEGER
  netraCtRscAlarmAdminState INTEGER
  netraCtRscAlarmPrefix INTEGER

NetraCtRscFanEntry  
SEQUENCE    
  netraCtRscFanIndex INTEGER
  netraCtRscFanPresent INTEGER
  netraCtRscFanStatus INTEGER

NetraCtRscTemperatureEntry  
SEQUENCE    
  netraCtRscTemperatureIndex INTEGER
  netraCtRscTemperatureValid INTEGER
  netraCtRscTemperatureValue INTEGER
  netraCtRscTemperatureLowWarn INTEGER
  netraCtRscTemperatureHighWarn INTEGER
  netraCtRscTemperatureDesc DisplayString

NetraCtRscEventLogEntry  
SEQUENCE    
  netraCtRscEventLogIndex INTEGER
  netraCtRscEventLogTimeStamp DateAndTime
  netraCtRscEventLogMessage DisplayString

NetraCtRscOrigConsoleLogEntry  
SEQUENCE    
  netraCtRscOrigConsoleLogIndex INTEGER
  netraCtRscOrigConsoleLogTimeStamp DateAndTime
  netraCtRscOrigConsoleLogMessage DisplayString

NetraCtRscConsoleLogEntry  
SEQUENCE    
  netraCtRscConsoleLogIndex INTEGER
  netraCtRscConsoleLogTimeStamp DateAndTime
  netraCtRscConsoleLogMessage DisplayString

Defined Values

netraCtRscMIB 1.3.6.1.4.1.42.2.65.2
The MIB module for the Netra ct 400/800 Remote System Control Products
MODULE-IDENTITY    

netraCtRscObjs 1.3.6.1.4.1.42.2.65.2.1
OBJECT IDENTIFIER    

netraCtRscEvents 1.3.6.1.4.1.42.2.65.2.2
OBJECT IDENTIFIER    

netraCtRscExpmnt 1.3.6.1.4.1.42.2.65.2.3
OBJECT IDENTIFIER    

netraCtRscAdminObjs 1.3.6.1.4.1.42.2.65.2.1.1
OBJECT IDENTIFIER    

netraCtRscConfigObjs 1.3.6.1.4.1.42.2.65.2.1.2
OBJECT IDENTIFIER    

netraCtRscSerial2Objs 1.3.6.1.4.1.42.2.65.2.1.3
OBJECT IDENTIFIER    

netraCtRscModemObjs 1.3.6.1.4.1.42.2.65.2.1.4
OBJECT IDENTIFIER    

netraCtRscEnetObjs 1.3.6.1.4.1.42.2.65.2.1.5
OBJECT IDENTIFIER    

netraCtRscEnvObjs 1.3.6.1.4.1.42.2.65.2.1.6
OBJECT IDENTIFIER    

netraCtRscLogObjs 1.3.6.1.4.1.42.2.65.2.1.7
OBJECT IDENTIFIER    

netraCtRscRccConfig 1.3.6.1.4.1.42.2.65.2.3.1
OBJECT IDENTIFIER    

netraCtRscTrapPrefix 1.3.6.1.4.1.42.2.65.2.2.0
OBJECT IDENTIFIER    

netraCtRscAdminRscReset 1.3.6.1.4.1.42.2.65.2.1.1.1
Setting this will soft Reset only the RSC (Remote System Controller) card. The clear(2) setting is read-only for this variable. This variable will always read as clear(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), clear(2), notimpl(2147483647)  

netraCtRscAdminHostReset 1.3.6.1.4.1.42.2.65.2.1.1.2
Setting netraCtRscAdminHostReset will cause either send a break to the host, or will toggle a hard reset line. A break will be sent if netraCtRscPanicDump conatins the value of on(1).Otherwise, a hard reset will occur. The clear(2) setting is read-only for this variable. This variable will always reads as clear(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), clear(2), notimpl(2147483647)  

netraCtRscAdminXir 1.3.6.1.4.1.42.2.65.2.1.1.3
Sends a hardware xir pulse to the host when set to true. This variable resets itself to clear(2) after the negation of the pulse.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), clear(2), notimpl(2147483647)  

netraCtRscAdminNmi 1.3.6.1.4.1.42.2.65.2.1.1.4
Sends a hardware nmi pulse to the host when set to true. This variable resets itself to clear(2) after the negation of the pulse.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), clear(2), notimpl(2147483647)  

netraCtRscAdminBreak 1.3.6.1.4.1.42.2.65.2.1.1.5
Sends a break to the Host when this is set. The clear(2) setting is read-only for this variable. This variable will always read as clear(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), clear(2), notimpl(2147483647)  

netraCtRscGlobalPageFlag 1.3.6.1.4.1.42.2.65.2.1.2.1
An on(1) to this variable will enable paging for RSC alerts. An off(2) will disable paging.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscGlobalEmailFlag 1.3.6.1.4.1.42.2.65.2.1.2.2
An on(1) to this variable will enable email for RSC alerts. An off(2) will disable email.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscGlobalIPModeFlag 1.3.6.1.4.1.42.2.65.2.1.2.3
IP mode global flag
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), config(2), dhcp(3), notimpl(2147483647)  

netraCtRscGlobalPPPFlag 1.3.6.1.4.1.42.2.65.2.1.2.4
serial configuration flag indicating whether PPP should be the default.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscHostname 1.3.6.1.4.1.42.2.65.2.1.2.5
name of Host connected to RSC
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..40)  

netraCtRscCustomerInfo 1.3.6.1.4.1.42.2.65.2.1.2.6
Customer information used in the message generated for a pager or email alert
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..40)  

netraCtRscVersionBootMajor 1.3.6.1.4.1.42.2.65.2.1.2.7
RSC Firmware BootMonitor Revision Major Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionBootMinor 1.3.6.1.4.1.42.2.65.2.1.2.8
RSC Firmware BootMonitor Revision Minor Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionBootMicro 1.3.6.1.4.1.42.2.65.2.1.2.9
RSC Firmware BootMonitor Revision Micro Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionMainMajor 1.3.6.1.4.1.42.2.65.2.1.2.10
RSC Core RSC Revision Major Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionMainMinor 1.3.6.1.4.1.42.2.65.2.1.2.11
RSC Core RSC Revision Minor Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionMainMicro 1.3.6.1.4.1.42.2.65.2.1.2.12
RSC Core RSC Revision Micro Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionFirmwareMajor 1.3.6.1.4.1.42.2.65.2.1.2.13
RSC Core Firmware Revision Major Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionFirmwareMinor 1.3.6.1.4.1.42.2.65.2.1.2.14
RSC Core Firmware Revision Minor Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscVersionFirmwareMicro 1.3.6.1.4.1.42.2.65.2.1.2.15
RSC Core Firmware Revision Micro Number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscTOD 1.3.6.1.4.1.42.2.65.2.1.2.16
RSC time of day
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

netraCtRscEscape 1.3.6.1.4.1.42.2.65.2.1.2.17
set the first character of the 2-character escape sequence
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1)  

netraCtRscHostWatchDogReboot 1.3.6.1.4.1.42.2.65.2.1.2.18
RSC monitors a heartbeat from the Solaris host. If this heartbeat is late, then a message will be logged, and an alarm will be set. If netraCtRscHostWatchDogReboot is on, then the solaris host will also be rebooted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscHostWatchDogTimeout 1.3.6.1.4.1.42.2.65.2.1.2.19
RSC monitors a heartbeat from the Solaris host. This variable indicates the maximum tolerable number of seconds between heartbeats, before RSC will set alarm0. A setting of 0 indicates that the heartbeat should not be monitored.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscPanicDump 1.3.6.1.4.1.42.2.65.2.1.2.20
If set to true when netraCtRscAdminHostReset is set, then a break will be sent to the host, causing a core dump to be saved on the host. Otherwise, the setting of netraCtRscAdminHostReset will cause a hardware reset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscSerial2Mode 1.3.6.1.4.1.42.2.65.2.1.3.1
serial port 2 configuration mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rcc(1), modem(2), tty(3), disabled(4), notimpl(2147483647)  

netraCtRscSerial2Parity 1.3.6.1.4.1.42.2.65.2.1.3.2
serial port 2 parity mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), notimpl(2147483647)  

netraCtRscSerial2Stop 1.3.6.1.4.1.42.2.65.2.1.3.3
serial port 2 stop bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), notimpl(2147483647)  

netraCtRscSerial2Data 1.3.6.1.4.1.42.2.65.2.1.3.4
serial port 2 data bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER seven(1), eight(2), notimpl(2147483647)  

netraCtRscSerial2Baud 1.3.6.1.4.1.42.2.65.2.1.3.5
serial port 2 baud rate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER b300(1), b1200(2), b1800(3), b2400(4), b4800(5), b9600(6), b19200(7), b38400(8), b57600(9), b115200(10), notimpl(2147483647)  

netraCtRscSerial2HwFlowcontrol 1.3.6.1.4.1.42.2.65.2.1.3.6
serial port 2 Hardware Flowcontrol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscSerial2Inactivity 1.3.6.1.4.1.42.2.65.2.1.3.7
serial port 2 inactivity.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscSerial2PagerOneConfig 1.3.6.1.4.1.42.2.65.2.1.3.8
primary pager number for RSC.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..40)  

netraCtRscSerial2PagerTwoConfig 1.3.6.1.4.1.42.2.65.2.1.3.9
secondary pager number for RSC
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..40)  

netraCtRscSerial2PagerOneBaud 1.3.6.1.4.1.42.2.65.2.1.3.10
primary pager baud rate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER b300(1), b1200(2), b2400(3), b4800(4), b9600(5), notimpl(2147483647)  

netraCtRscSerial2PagerTwoBaud 1.3.6.1.4.1.42.2.65.2.1.3.11
secondary pager baud rate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER b300(1), b1200(2), b2400(3), b4800(4), b9600(5), notimpl(2147483647)  

netraCtRscSerial2PagerOneParity 1.3.6.1.4.1.42.2.65.2.1.3.12
primary pager parity mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), notimpl(2147483647)  

netraCtRscSerial2PagerTwoParity 1.3.6.1.4.1.42.2.65.2.1.3.13
secondary pager parity mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), notimpl(2147483647)  

netraCtRscSerial2PagerOneStop 1.3.6.1.4.1.42.2.65.2.1.3.14
primary pager stop bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), notimpl(2147483647)  

netraCtRscSerial2PagerTwoStop 1.3.6.1.4.1.42.2.65.2.1.3.15
secondary pager stop bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), notimpl(2147483647)  

netraCtRscSerial2PagerOneData 1.3.6.1.4.1.42.2.65.2.1.3.16
primary pager data bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER seven(1), eight(2), notimpl(2147483647)  

netraCtRscSerial2PagerTwoData 1.3.6.1.4.1.42.2.65.2.1.3.17
secondary pager data bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER seven(1), eight(2), notimpl(2147483647)  

netraCtRscSerial2PagerOneInit 1.3.6.1.4.1.42.2.65.2.1.3.18
primary pager modem init string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..30)  

netraCtRscSerial2PagerTwoInit 1.3.6.1.4.1.42.2.65.2.1.3.19
secondary pager modem init string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..30)  

netraCtRscSerial2PagerOnePassword 1.3.6.1.4.1.42.2.65.2.1.3.20
primary pager TAP password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..8)  

netraCtRscSerial2PagerTwoPassword 1.3.6.1.4.1.42.2.65.2.1.3.21
secondary pager TAP password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..8)  

netraCtRscModemParity 1.3.6.1.4.1.42.2.65.2.1.4.1
modem parity mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), notimpl(2147483647)  

netraCtRscModemStop 1.3.6.1.4.1.42.2.65.2.1.4.2
modem stop bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), notimpl(2147483647)  

netraCtRscModemData 1.3.6.1.4.1.42.2.65.2.1.4.3
modem data bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER seven(1), eight(2), notimpl(2147483647)  

netraCtRscCountryCode 1.3.6.1.4.1.42.2.65.2.1.4.4
country specified using CCITT internaional dial-plan number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscModemModel 1.3.6.1.4.1.42.2.65.2.1.4.5
the modem type used on the netraCtRsc card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..40)  

netraCtRscMacAddress 1.3.6.1.4.1.42.2.65.2.1.5.1
Ethernet address for RSC.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

netraCtRscEnetTpeLinkTest 1.3.6.1.4.1.42.2.65.2.1.5.2
Determines whether tpe-link-test should be set of clear. This should be off when interfacing with older-style hubs that don't support heartbeat.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscIPAddress 1.3.6.1.4.1.42.2.65.2.1.5.3
configured IP address for RSC.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscIpMask 1.3.6.1.4.1.42.2.65.2.1.5.4
configured IP netmask for RSC.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscIpGateway 1.3.6.1.4.1.42.2.65.2.1.5.5
configured IP gateway for RSC.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscSNMPHostAddress 1.3.6.1.4.1.42.2.65.2.1.5.6
configured SNMP server for RSC alerts.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscMailHostAddress 1.3.6.1.4.1.42.2.65.2.1.5.7
Address of Mail Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscMailUser 1.3.6.1.4.1.42.2.65.2.1.5.8
email address for RSC alerts.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..40)  

netraCtRscPPPLocalIP 1.3.6.1.4.1.42.2.65.2.1.5.9
PPP local IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscPPPRemoteIP 1.3.6.1.4.1.42.2.65.2.1.5.10
PPP remote IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscMailHostAddressBackup 1.3.6.1.4.1.42.2.65.2.1.5.11
Backup Address of Mail Server. when no IP address is configured for mail server, back up IP address becomes first IP address of mailhost
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netraCtRscSystemType 1.3.6.1.4.1.42.2.65.2.1.6.1
System Type. This will currently return one of the following 2 strings: NetraCt400 , or NetraCt800.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..127)  

netraCtRscPowerSupplyCount 1.3.6.1.4.1.42.2.65.2.1.6.2
The total number of Power Supply FRUs in the platform.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

netraCtRscPowerSupplyTable 1.3.6.1.4.1.42.2.65.2.1.6.3
A table listing the characteristics of the Power-Supply FRU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetraCtRscPowerSupplyEntry

netraCtRscPowerSupplyEntry 1.3.6.1.4.1.42.2.65.2.1.6.3.1
an entry (conceptual row) in the netraCtRscPowerSupplyTable
Status: current Access: not-accessible
OBJECT-TYPE    
  NetraCtRscPowerSupplyEntry  

netraCtRscPowerSupplyIndex 1.3.6.1.4.1.42.2.65.2.1.6.3.1.1
Entry number for this Power-Supply FRU row.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

netraCtRscPowerSupplyPresent 1.3.6.1.4.1.42.2.65.2.1.6.3.1.2
Power-Supply FRU is present.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2), unknown(3), notimpl(2147483647)  

netraCtRscPowerSupplyOperState 1.3.6.1.4.1.42.2.65.2.1.6.3.1.3
The current status of the Power-Supply FRU.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), failed(2), unknown(3), offline(4), notimpl(2147483647)  

netraCtRscPowerSupplyAdminState 1.3.6.1.4.1.42.2.65.2.1.6.3.1.4
Setting this value to on(1) requests that the power supply be turned on. Setting this value to off(2) requests that the power supply be turned off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscAlarmCount 1.3.6.1.4.1.42.2.65.2.1.6.4
Number of Alarm Ports in this Platform
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

netraCtRscAlarmTable 1.3.6.1.4.1.42.2.65.2.1.6.5
a table listing the available Alarm Ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetraCtRscAlarmEntry

netraCtRscAlarmEntry 1.3.6.1.4.1.42.2.65.2.1.6.5.1
an entry (conceptual row) in the netraCtRscAlarmTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetraCtRscAlarmEntry  

netraCtRscAlarmIndex 1.3.6.1.4.1.42.2.65.2.1.6.5.1.1
row index into Alarm Port table
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

netraCtRscAlarmID 1.3.6.1.4.1.42.2.65.2.1.6.5.1.2
Alarm identifier. The current Netra ct 400/800 Alarm Cards currently supports Alarm IDs of 0,1,2, and 3.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

netraCtRscAlarmOperState 1.3.6.1.4.1.42.2.65.2.1.6.5.1.3
This returns the current value of the Alarm, which may have been set by either software due to environmental conditions, such as Fan failure, or manually, by the setting of netraCtRscAlarmAdminState.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscAlarmAdminState 1.3.6.1.4.1.42.2.65.2.1.6.5.1.4
This reflects the requested state of an alarm port by the SNMP manager.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

netraCtRscAlarmPrefix 1.3.6.1.4.1.42.2.65.2.1.6.5.1.5
The Alarm Prefix that will associate an FRU type to an alarm. Currently supported definitions are: cpuunit(1), software(2), powersupply(3), temperature(4), fan(5). 6 through 9 are reserved for future expansion. 10 through 255 are undefined, and can be configured for user-defined messages and alarming.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

netraCtRscFanCount 1.3.6.1.4.1.42.2.65.2.1.6.6
Maximum number of Fan Tray FRUs in Platform
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

netraCtRscFanTable 1.3.6.1.4.1.42.2.65.2.1.6.7
a table listing the characteristics of the Fan Tray FRU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetraCtRscFanEntry

netraCtRscFanEntry 1.3.6.1.4.1.42.2.65.2.1.6.7.1
an entry (conceptual row) in the netraCtRscFanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetraCtRscFanEntry  

netraCtRscFanIndex 1.3.6.1.4.1.42.2.65.2.1.6.7.1.1
row index into Fan FRU table
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

netraCtRscFanPresent 1.3.6.1.4.1.42.2.65.2.1.6.7.1.2
Fan FRU is present
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2), unknown(3), notimpl(2147483647)  

netraCtRscFanStatus 1.3.6.1.4.1.42.2.65.2.1.6.7.1.3
The current status of the Fan FRU. unknown will be returned if the status is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), failed(2), unknown(3), notimpl(2147483647)  

netraCtRscTemperatureCount 1.3.6.1.4.1.42.2.65.2.1.6.8
Maximum number of temperature sensors on Platform
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

netraCtRscTemperatureTable 1.3.6.1.4.1.42.2.65.2.1.6.9
a table listing the contents of the event log as an array of strings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetraCtRscTemperatureEntry

netraCtRscTemperatureEntry 1.3.6.1.4.1.42.2.65.2.1.6.9.1
an entry (conceptual row) in the netraCtRscTemperatureTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetraCtRscTemperatureEntry  

netraCtRscTemperatureIndex 1.3.6.1.4.1.42.2.65.2.1.6.9.1.1
current row of the Temperature sensor
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

netraCtRscTemperatureValid 1.3.6.1.4.1.42.2.65.2.1.6.9.1.2
The current temperature at this sensor is known. If the temperature cannot be obtained, then false will be returned, and netraCtRscTemperatureValue should not be considered to be valid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

netraCtRscTemperatureValue 1.3.6.1.4.1.42.2.65.2.1.6.9.1.3
current temperature at this sensor
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

netraCtRscTemperatureLowWarn 1.3.6.1.4.1.42.2.65.2.1.6.9.1.4
low warning threshold for this temperature sensor
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

netraCtRscTemperatureHighWarn 1.3.6.1.4.1.42.2.65.2.1.6.9.1.5
high warning threshold for this temperature sensor
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

netraCtRscTemperatureDesc 1.3.6.1.4.1.42.2.65.2.1.6.9.1.6
textual description of the Temperature sensor
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..255)  

netraCtRscEventLogCount 1.3.6.1.4.1.42.2.65.2.1.7.1
current number of lines in the event log
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscEventLogTable 1.3.6.1.4.1.42.2.65.2.1.7.2
a table listing the contents of the event log as an array of strings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetraCtRscEventLogEntry

netraCtRscEventLogEntry 1.3.6.1.4.1.42.2.65.2.1.7.2.1
an entry (conceptual row) in the netraCtRscEventLogTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetraCtRscEventLogEntry  

netraCtRscEventLogIndex 1.3.6.1.4.1.42.2.65.2.1.7.2.1.1
The index of the entry. The oldest entry will start at index 0. The most recent entry will be found at the index equal to netraCtRscEventLogCount - 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscEventLogTimeStamp 1.3.6.1.4.1.42.2.65.2.1.7.2.1.2
event timestamp
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

netraCtRscEventLogMessage 1.3.6.1.4.1.42.2.65.2.1.7.2.1.3
textual description of an event.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..255)  

netraCtRscOrigConsoleLogCount 1.3.6.1.4.1.42.2.65.2.1.7.3
current number of lines in the original console log.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscOrigConsoleLogTable 1.3.6.1.4.1.42.2.65.2.1.7.4
a table listing the contents of the original console log as an array of strings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetraCtRscOrigConsoleLogEntry

netraCtRscOrigConsoleLogEntry 1.3.6.1.4.1.42.2.65.2.1.7.4.1
an entry (conceptual row) in the netraCtRscOrigConsoleLogTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetraCtRscOrigConsoleLogEntry  

netraCtRscOrigConsoleLogIndex 1.3.6.1.4.1.42.2.65.2.1.7.4.1.1
The index of the entry. The oldest entry will start at index 0. The most recent entry will be found at the index equal to netraCtRscOrigConsoleLogCount - 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscOrigConsoleLogTimeStamp 1.3.6.1.4.1.42.2.65.2.1.7.4.1.2
Original Console Log timestamp
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

netraCtRscOrigConsoleLogMessage 1.3.6.1.4.1.42.2.65.2.1.7.4.1.3
textual description of an event.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..255)  

netraCtRscConsoleLogCount 1.3.6.1.4.1.42.2.65.2.1.7.5
current number of lines in the console log.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscConsoleLogTable 1.3.6.1.4.1.42.2.65.2.1.7.6
a table listing the contents of the console log as an array of strings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetraCtRscConsoleLogEntry

netraCtRscConsoleLogEntry 1.3.6.1.4.1.42.2.65.2.1.7.6.1
an entry (conceptual row) in the netraCtRscConsoleLogTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NetraCtRscConsoleLogEntry  

netraCtRscConsoleLogIndex 1.3.6.1.4.1.42.2.65.2.1.7.6.1.1
The index of the entry. The oldest entry will start at index 0. The most recent entry will be found at the index equal to netraCtRscConsoleLogCount - 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

netraCtRscConsoleLogTimeStamp 1.3.6.1.4.1.42.2.65.2.1.7.6.1.2
Console Log timestamp
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

netraCtRscConsoleLogMessage 1.3.6.1.4.1.42.2.65.2.1.7.6.1.3
textual description of an event.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..255)  

netraCtRscConsoleReset 1.3.6.1.4.1.42.2.65.2.1.7.7
When set, the console log is reset so that the current log is copied over to the original console log, and the the console log will be cleared. All new console messages will then go to the console log.clear(2) setting is read-only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(1), clear(2)  

netraCtRscRCCPowerOnEnable 1.3.6.1.4.1.42.2.65.2.3.1.1
If set to false, masks the RCC PowerOn command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscRCCPowerOffEnable 1.3.6.1.4.1.42.2.65.2.3.1.2
If set to false, masks the RCC PowerOff command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscRCCResetEnable 1.3.6.1.4.1.42.2.65.2.3.1.3
If set to false, masks the RCC Reset command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notimpl(2147483647)  

netraCtRscRCCLinkNum 1.3.6.1.4.1.42.2.65.2.3.1.4
2-byte string that defines the RCC Linknum address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(2)  

netraCtRscEvent 1.3.6.1.4.1.42.2.65.2.2.0.1
Event used to notify the snmp manager of a new RSC event. An event is generated when one of the values: netraCtRscAlarmOperState, in the Table:netraCtRscAlarmTable changes state.
Status: current Access: read-write
NOTIFICATION-TYPE