SONUS-ACCOUNTING-SERVICES-MIB

File: SONUS-ACCOUNTING-SERVICES-MIB.mib (6896 bytes)

Imported modules

SNMPv2-SMI SONUS-COMMON-MIB SONUS-SMI
SONUS-TC

Imported symbols

Counter64 Integer32 MODULE-IDENTITY
NOTIFICATION-TYPE OBJECT-TYPE sonusEventClass
sonusEventDescription sonusEventLevel sonusServicesMIBs
SonusAdminState

Defined Values

sonusAccountingServicesMIB 1.3.6.1.4.1.2879.2.5.5
The MIB Module for Accounting Services Management.
MODULE-IDENTITY    

sonusAccountingServicesMIBObjects 1.3.6.1.4.1.2879.2.5.5.1
OBJECT IDENTIFIER    

sonusCallAccountingObjects 1.3.6.1.4.1.2879.2.5.5.1.1
OBJECT IDENTIFIER    

sonusCallAccountingConfigObjects 1.3.6.1.4.1.2879.2.5.5.1.1.1
OBJECT IDENTIFIER    

sonusAcctGenerationMode 1.3.6.1.4.1.2879.2.5.5.1.1.1.1
This configures the accounting generation mode for the node
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER origination(1), destination(2), allcalls(3), none(4)  

sonusAcctLogDestination 1.3.6.1.4.1.2879.2.5.5.1.1.1.2
This configures the destination of the accounting files for the node
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eventlog(1)  

sonusAcctIntAcctState 1.3.6.1.4.1.2879.2.5.5.1.1.1.3
This configures whether Intermediate Accounting is Enabled or Disabled for the Node
Status: current Access: read-write
OBJECT-TYPE    
  SonusAdminState  

sonusAcctIntAcctInterval 1.3.6.1.4.1.2879.2.5.5.1.1.1.4
This configures the Intermediate Accounting Interval in seconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..86400  

sonusCallAccountingStatusObjects 1.3.6.1.4.1.2879.2.5.5.1.1.2
OBJECT IDENTIFIER    

sonusAcctNumCallAttempts 1.3.6.1.4.1.2879.2.5.5.1.1.2.1
The total Number of Call Attempts since last reboot
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sonusAcctNumCallCompletions 1.3.6.1.4.1.2879.2.5.5.1.1.2.2
The total Number of Succesful Call Completions since last reboot
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sonusAcctNumCallAttemptFailures 1.3.6.1.4.1.2879.2.5.5.1.1.2.3
The total Number of Unsuccesful Call Attempts since last reboot
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sonusAcctBusyHourAttempts 1.3.6.1.4.1.2879.2.5.5.1.1.2.4
The Average BHCA rate in the last one hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusAcctCallAttemptRate 1.3.6.1.4.1.2879.2.5.5.1.1.2.5
The Call arrival rate in calls/sec in the last one minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusAcctAvgCallDuration 1.3.6.1.4.1.2879.2.5.5.1.1.2.6
The Average Call Duration in seconds
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sonusAcctNumCallAttemptBlocked 1.3.6.1.4.1.2879.2.5.5.1.1.2.7
The total Number of Calls which were blocked/screened since last reboot
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sonusAccountingMIBNotifications 1.3.6.1.4.1.2879.2.5.5.2
OBJECT IDENTIFIER    

sonusAccountingMIBNotificationsPrefix 1.3.6.1.4.1.2879.2.5.5.2.0
OBJECT IDENTIFIER    

sonusAccountingMIBNotificationsObjects 1.3.6.1.4.1.2879.2.5.5.2.1
OBJECT IDENTIFIER    

sonusAcctOutOfServiceReason 1.3.6.1.4.1.2879.2.5.5.2.1.1
The Reason for Call Accounting for the Node being Out-of-Service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER configChange(1), eventLoggingError(2)  

sonusCallAccountingInServiceNotification 1.3.6.1.4.1.2879.2.5.5.2.0.1
This Trap is Generated when a change is made to the Accounting Configuration for the Node, and the resultant configuration state of accounting for the node is that it is enabled/in-service
Status: current Access: read-only
NOTIFICATION-TYPE    

sonusCallAccountingOutOfServiceNotification 1.3.6.1.4.1.2879.2.5.5.2.0.2
This Trap is Generated when Accounting Records are no longer being generated on the Node. It could be either because of a change to the Accounting Configuration or because of errors in the logging mechanism such as file logging errors. When the reason specified for accounting outofservice is event logging error, then the SYS event logs on the Node should be examined to obtain further information about the event logging failure
Status: current Access: read-only
NOTIFICATION-TYPE