SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB

File: SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB.mib (16558 bytes)

Imported modules

RFC1155-SMI

RFC-1212

SONOMASYSTEMS-SONOMA-MIB

Imported symbols

Counter

OBJECT-TYPE

sonomaATM

Defined Types

AtmOC3cConfPhyEntry
SEQUENCE
	atmOC3cConfPhysIndex	INTEGER
	atmOC3cConfFraming	INTEGER
	atmOC3cConfLoopbackMode	INTEGER
	atmOC3cConfFillerCells	INTEGER
	atmOC3cConfOpticalDataLink	INTEGER
	atmOC3cConfReceiveClockLooping	INTEGER

AtmOC3cStatsEntry
SEQUENCE
	atmOC3cStatsPhysIndex	INTEGER
	atmOC3cStatsNoSignals	Counter
	atmOC3cStatsNoOC3cFrames	Counter
	atmOC3cStatsFrameErrors	Counter
	atmOC3cStatsB1ParityErrors	Counter
	atmOC3cStatsB2ParityErrors	Counter
	atmOC3cStatsB3ParityErrors	Counter
	atmOC3cStatsB1BlockErrors	Counter
	atmOC3cStatsB2BlockErrors	Counter
	atmOC3cStatsB3BlockErrors	Counter
	atmOC3cStatsB1CodeViolations	Counter
	atmOC3cStatsB2CodeViolations	Counter
	atmOC3cStatsB3CodeViolations	Counter
	atmOC3cStatsLineFERFDetects	Counter
	atmOC3cStatsPathFERFDetects	Counter
	atmOC3cStatsLineAISDetects	Counter
	atmOC3cStatsPathAISDetects	Counter
	atmOC3cStatsRDIDefects	Counter
	atmOC3cStatsSignalLoss	INTEGER
	atmOC3cStatsOpticalCarrierLoss	INTEGER
	atmOC3cStatsFrameLoss	INTEGER
	atmOC3cStatsSyncLoss	INTEGER
	atmOC3cStatsOutOfCell	INTEGER
	atmOC3cStatsPointerLoss	INTEGER
	atmOC3cStatsFIFOOverflow	INTEGER
	atmOC3cStatsLineFERFDetect	INTEGER
	atmOC3cStatsPathFERFDetect	INTEGER
	atmOC3cStatsLineAISState	INTEGER
	atmOC3cStatsPathAISState	INTEGER
	atmOC3cStatsRDIState	INTEGER
	atmOC3cStatsClearCounters	INTEGER

Defined Values

sonomaOC3cATMAdapterGroup		1.3.6.1.4.1.2926.25.7.4
OBJECT IDENTIFIER

atmOC3cConfGroup		1.3.6.1.4.1.2926.25.7.4.1
OBJECT IDENTIFIER

atmOC3cStatsGroup		1.3.6.1.4.1.2926.25.7.4.2
OBJECT IDENTIFIER

atmOC3cConfPhyTable		1.3.6.1.4.1.2926.25.7.4.1.1
A table of physical layer configuration for the OC3c interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmOC3cConfPhyEntry

atmOC3cConfPhyEntry		1.3.6.1.4.1.2926.25.7.4.1.1.1
A entry in the table, containing information about the physical layer of a OC3c interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmOC3cConfPhyEntry

atmOC3cConfPhysIndex		1.3.6.1.4.1.2926.25.7.4.1.1.1.1
The physical interface index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmOC3cConfFraming		1.3.6.1.4.1.2926.25.7.4.1.1.1.2
Indicates the type of framing supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sONET-STS3c(1), sDH-STM1(2)

atmOC3cConfLoopbackMode		1.3.6.1.4.1.2926.25.7.4.1.1.1.3
Configure the loopback mode to use.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), terminal(2), facility(3), both(4)

atmOC3cConfFillerCells		1.3.6.1.4.1.2926.25.7.4.1.1.1.4
This parameter indicates the type of filler cells to send when there are no data cells.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unassigned(1), idle(2)

atmOC3cConfOpticalDataLink		1.3.6.1.4.1.2926.25.7.4.1.1.1.5
This parameter indicates the type of Optical Data Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	multiMode(1), singleModeIntermedReach(2), singleModeLongReach(3)

atmOC3cConfReceiveClockLooping		1.3.6.1.4.1.2926.25.7.4.1.1.1.6
When enabled, the receive clock is used as the clock for the transmit side. Otherwise an internal oscillator is used for the transmit clock.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

atmOC3cStatsTable		1.3.6.1.4.1.2926.25.7.4.2.1
A table of physical layer statistics information for the OC3c interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmOC3cStatsEntry

atmOC3cStatsEntry		1.3.6.1.4.1.2926.25.7.4.2.1.1
A entry in the table, containing information about the physical layer of a OC3c interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmOC3cStatsEntry

atmOC3cStatsPhysIndex		1.3.6.1.4.1.2926.25.7.4.2.1.1.1
The physical interface index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmOC3cStatsNoSignals		1.3.6.1.4.1.2926.25.7.4.2.1.1.2
No signal error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsNoOC3cFrames		1.3.6.1.4.1.2926.25.7.4.2.1.1.3
No OC3c frames error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsFrameErrors		1.3.6.1.4.1.2926.25.7.4.2.1.1.4
A count of the number of Frames in error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB1ParityErrors		1.3.6.1.4.1.2926.25.7.4.2.1.1.5
B1 parity error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB2ParityErrors		1.3.6.1.4.1.2926.25.7.4.2.1.1.6
B2 parity error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB3ParityErrors		1.3.6.1.4.1.2926.25.7.4.2.1.1.7
B3 parity error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB1BlockErrors		1.3.6.1.4.1.2926.25.7.4.2.1.1.8
B1 block error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB2BlockErrors		1.3.6.1.4.1.2926.25.7.4.2.1.1.9
B2 block error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB3BlockErrors		1.3.6.1.4.1.2926.25.7.4.2.1.1.10
B3 block error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB1CodeViolations		1.3.6.1.4.1.2926.25.7.4.2.1.1.11
B1 code violation error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB2CodeViolations		1.3.6.1.4.1.2926.25.7.4.2.1.1.12
B2 code violation error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsB3CodeViolations		1.3.6.1.4.1.2926.25.7.4.2.1.1.13
B3 code violation error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsLineFERFDetects		1.3.6.1.4.1.2926.25.7.4.2.1.1.14
Line FERF detects counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsPathFERFDetects		1.3.6.1.4.1.2926.25.7.4.2.1.1.15
Path FERF detects counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsLineAISDetects		1.3.6.1.4.1.2926.25.7.4.2.1.1.16
Line AIS (Alarm Indication Signal) error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsPathAISDetects		1.3.6.1.4.1.2926.25.7.4.2.1.1.17
Path AIS (Alarm Indication Signal) error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsRDIDefects		1.3.6.1.4.1.2926.25.7.4.2.1.1.18
RDI (Remote Defects Indication) error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOC3cStatsSignalLoss		1.3.6.1.4.1.2926.25.7.4.2.1.1.19
Signal Loss state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsOpticalCarrierLoss		1.3.6.1.4.1.2926.25.7.4.2.1.1.20
Optical carrier loss state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsFrameLoss		1.3.6.1.4.1.2926.25.7.4.2.1.1.21
The frame loss state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsSyncLoss		1.3.6.1.4.1.2926.25.7.4.2.1.1.22
The Sync loss state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsOutOfCell		1.3.6.1.4.1.2926.25.7.4.2.1.1.23
The out-of-cell state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsPointerLoss		1.3.6.1.4.1.2926.25.7.4.2.1.1.24
The pointer loss state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsFIFOOverflow		1.3.6.1.4.1.2926.25.7.4.2.1.1.25
ATM FIFO overflow state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsLineFERFDetect		1.3.6.1.4.1.2926.25.7.4.2.1.1.26
Line FERF state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsPathFERFDetect		1.3.6.1.4.1.2926.25.7.4.2.1.1.27
Path FERF state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsLineAISState		1.3.6.1.4.1.2926.25.7.4.2.1.1.28
The Line AIS (Alarm Indication Signal) state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsPathAISState		1.3.6.1.4.1.2926.25.7.4.2.1.1.29
The Path AIS (Alarm Indication Signal) state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsRDIState		1.3.6.1.4.1.2926.25.7.4.2.1.1.30
RDI (Remote Defect Indication) state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmOC3cStatsClearCounters		1.3.6.1.4.1.2926.25.7.4.2.1.1.31
Clear all counters in this group ONLY.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)