SNI-BUS-MIB
File:
SNI-BUS-MIB.mib (40363 bytes)
Imported modules
Imported symbols
Defined Types
| SniFunctionEntry |
|
| SEQUENCE |
|
|
|
| |
sniBusType |
INTEGER |
|
| |
sniBusIndex |
INTEGER |
|
| |
sniDeviceSlotNo |
INTEGER |
|
| |
sniFunctionNo |
INTEGER |
|
| |
sniDeviceType |
INTEGER |
|
| |
sniDeviceTypeName |
DisplayString |
|
| |
sniDeviceName |
DisplayString |
|
| |
sniVendorName |
DisplayString |
|
| |
sniPhysicalSlotNo |
INTEGER |
|
| |
sniAdapterSpecificData |
OCTET STRING |
|
| |
sniOsDeviceName |
DisplayString |
|
| |
sniPhysicalSlotDesignation |
DisplayString |
|
| |
sniCompLocationKey |
OCTET STRING |
|
| SniEisaFunctionEntry |
|
| SEQUENCE |
|
|
|
| |
sniEisaBusIndex |
INTEGER |
|
| |
sniEisaSlotNo |
INTEGER |
|
| |
sniEisaFunctionNo |
INTEGER |
|
| |
sniEisaSlotType |
INTEGER |
|
| |
sniEisaConfigurationComplete |
INTEGER |
|
| |
sniEisaType |
DisplayString |
|
| |
sniEisaValid |
INTEGER |
|
| |
sniEisaId |
DisplayString |
|
| |
sniEisaName |
DisplayString |
|
| |
sniEisaAgentType |
INTEGER |
|
| SniPciFunctionEntry |
|
| SEQUENCE |
|
|
|
| |
sniPciBusIndex |
INTEGER |
|
| |
sniPciDeviceNo |
INTEGER |
|
| |
sniPciFunctionNo |
INTEGER |
|
| |
sniPciVendorId |
INTEGER |
|
| |
sniPciDeviceId |
INTEGER |
|
| |
sniPciRevisionId |
INTEGER |
|
| |
sniPciBaseClass |
INTEGER |
|
| |
sniPciSubClass |
INTEGER |
|
| |
sniPciProgIf |
INTEGER |
|
| |
sniPciBuiltInSelfTest |
INTEGER |
|
| |
sniPciInterruptPin |
INTEGER |
|
| |
sniPciInterruptLine |
INTEGER |
|
| |
sniPciSpecificData |
OCTET STRING |
|
| |
sniPciSecondaryBusIndex |
INTEGER |
|
| |
sniPciSecondaryBusType |
INTEGER |
|
| |
sniPciSubDeviceId |
INTEGER |
|
| |
sniPciSubVendorId |
INTEGER |
|
| |
sniPciVendorName |
DisplayString |
|
| |
sniPciSubVendorName |
DisplayString |
|
| SniMemoryEntry |
|
| SEQUENCE |
|
|
|
| |
sniMemBusType |
INTEGER |
|
| |
sniMemBusIndex |
INTEGER |
|
| |
sniMemSlotDevice |
INTEGER |
|
| |
sniMemFunctionNo |
INTEGER |
|
| |
sniMemoryNo |
INTEGER |
|
| |
sniBusSharedMemory |
INTEGER |
|
| |
sniBusMemoryStart |
INTEGER |
|
| |
sniBusMemoryLength |
INTEGER |
|
| |
sniBusMemoryStartHigh |
INTEGER |
|
| SniInterruptEntry |
|
| SEQUENCE |
|
|
|
| |
sniIntBusType |
INTEGER |
|
| |
sniIntBusIndex |
INTEGER |
|
| |
sniIntSlotDevice |
INTEGER |
|
| |
sniIntFunctionNo |
INTEGER |
|
| |
sniInterruptNo |
INTEGER |
|
| |
sniBusInterruptUsed |
INTEGER |
|
| |
sniBusInterruptLevel |
INTEGER |
|
| |
sniBusInterruptShared |
INTEGER |
|
| |
sniBusInterruptNo |
INTEGER |
|
| SniDMAEntry |
|
| SEQUENCE |
|
|
|
| |
sniDMABusType |
INTEGER |
|
| |
sniDMABusIndex |
INTEGER |
|
| |
sniDMASlotDevice |
INTEGER |
|
| |
sniDMAFunctionNo |
INTEGER |
|
| |
sniDMANo |
INTEGER |
|
| |
sniBusDMAChannel |
INTEGER |
|
| |
sniBusDMATiming |
INTEGER |
|
| |
sniBusDMATransferSize |
INTEGER |
|
| SniPortEntry |
|
| SEQUENCE |
|
|
|
| |
sniPortBusType |
INTEGER |
|
| |
sniPortBusIndex |
INTEGER |
|
| |
sniPortSlotDevice |
INTEGER |
|
| |
sniPortFunctionNo |
INTEGER |
|
| |
sniPortNo |
INTEGER |
|
| |
sniBusIOFirstPort |
INTEGER |
|
| |
sniBusIONoOfPorts |
INTEGER |
|
| |
sniBusIOPortShared |
INTEGER |
|
| SvPciFunctionEntry |
|
| SEQUENCE |
|
|
|
| |
svPciSegmentNo |
INTEGER |
|
| |
svPciBusIndex |
INTEGER |
|
| |
svPciDeviceNo |
INTEGER |
|
| |
svPciFunctionNo |
INTEGER |
|
| |
svPciVendorId |
INTEGER |
|
| |
svPciDeviceId |
INTEGER |
|
| |
svPciRevisionId |
INTEGER |
|
| |
svPciBaseClass |
INTEGER |
|
| |
svPciSubClass |
INTEGER |
|
| |
svPciProgIf |
INTEGER |
|
| |
svPciBuiltInSelfTest |
INTEGER |
|
| |
svPciInterruptPin |
INTEGER |
|
| |
svPciInterruptLine |
INTEGER |
|
| |
svPciSpecificData |
OCTET STRING |
|
| |
svPciSecondaryBusIndex |
INTEGER |
|
| |
svPciSecondaryBusType |
INTEGER |
|
| |
svPciSubDeviceId |
INTEGER |
|
| |
svPciSubVendorId |
INTEGER |
|
| |
svPciVendorName |
DisplayString |
|
| |
svPciSubVendorName |
DisplayString |
|
| |
svPciDeviceName |
DisplayString |
|
| |
svPciAdapterUniqueId |
OCTET STRING |
|
| |
svPciAdapterSpecificData |
OCTET STRING |
|
| |
svPciPhysicalSlotDesignation |
DisplayString |
|
| |
svPciCompLocationKey |
OCTET STRING |
|
Defined Values
| sni |
1.3.6.1.4.1.231 |
| OBJECT IDENTIFIER |
|
|
|
| sniCommon |
1.3.6.1.4.1.231.2.10.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| sniBios |
1.3.6.1.4.1.231.2.10.2.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| sniEisa |
1.3.6.1.4.1.231.2.10.2.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| sniHd |
1.3.6.1.4.1.231.2.10.2.2.3 |
| OBJECT IDENTIFIER |
|
|
|
| sniBus |
1.3.6.1.4.1.231.2.10.2.2.4 |
| OBJECT IDENTIFIER |
|
|
|
| sniScb |
1.3.6.1.4.1.231.2.10.2.4 |
| OBJECT IDENTIFIER |
|
|
|
| sniNetware |
1.3.6.1.4.1.231.2.10.2.5.1 |
| OBJECT IDENTIFIER |
|
|
|
| sniWinNt |
1.3.6.1.4.1.231.2.10.2.5.2 |
| OBJECT IDENTIFIER |
|
|
|
| sniOs2 |
1.3.6.1.4.1.231.2.10.2.5.3 |
| OBJECT IDENTIFIER |
|
|
|
| sniUnix |
1.3.6.1.4.1.231.2.10.2.5.4 |
| OBJECT IDENTIFIER |
|
|
|
| sniOemDpt |
1.3.6.1.4.1.231.2.10.2.6.1 |
| OBJECT IDENTIFIER |
|
|
|
| sniOemMylex |
1.3.6.1.4.1.231.2.10.2.6.2 |
| OBJECT IDENTIFIER |
|
|
|
| sniTrapMib |
1.3.6.1.4.1.231.2.10.5 |
| OBJECT IDENTIFIER |
|
|
|
| sniBusEisa |
1.3.6.1.4.1.231.2.10.2.2.4.2 |
| OBJECT IDENTIFIER |
|
|
|
| sniBusPci |
1.3.6.1.4.1.231.2.10.2.2.4.3 |
| OBJECT IDENTIFIER |
|
|
|
| svBusPciEx |
1.3.6.1.4.1.231.2.10.2.2.4.6 |
| OBJECT IDENTIFIER |
|
|
|
| sniEisaSlots |
1.3.6.1.4.1.231.2.10.2.2.4.1.1 |
| Number of eisa slots in the system. 0 if no EISA-Bus present. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniIsaSlots |
1.3.6.1.4.1.231.2.10.2.2.4.1.2 |
| Number of isa slots in the system. 0 if no ISA-Bus present. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciSlots |
1.3.6.1.4.1.231.2.10.2.2.4.1.3 |
| Number of pci slots in the system. 0 if no PCI-Bus present. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniFunctionTable |
1.3.6.1.4.1.231.2.10.2.2.4.1.4 |
| Table of all common data for all functions |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SniFunctionEntry |
|
| sniFunctionEntry |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SniFunctionEntry |
|
|
| sniBusType |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.1 |
| Type of the bus |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), isa(2), eisa(3), pci(5), usb(6), firewire(7), ata(8) |
|
| sniBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.2 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniDeviceSlotNo |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.3 |
| Device- or Slot-number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.4 |
| Functionnumber based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniDeviceType |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.5 |
| indicates the type of device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), diskcontroller(1), tapecontroller(2), cdromcontoller(3), wormcontroller(4), serialcontroller(5), networkcontroller(6), displaycontroller(7), parallelcontroller(8), pointercontoller(9), keyboardcontroller(10), audiocontroller(11), othercontroller(12), bridge-device(13), cpu(14) |
|
| sniDeviceName |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.7 |
| Operating system independent name of device in readable form |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sniVendorName |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.8 |
| manufacturer of the device in readable form |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sniPhysicalSlotNo |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.9 |
| indicates the physical slot the device resides in (0: onboard device, -1: not available) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniAdapterSpecificData |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.10 |
| Specific data for this adapter. Currently the only information defined
is the MAC address for lan adapters. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| sniOsDeviceName |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.11 |
| Operating system specific display name for the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sniCompLocationKey |
1.3.6.1.4.1.231.2.10.2.2.4.1.4.1.13 |
| Device location key, used for identifying the component; e.g. 'TYPE_PCI&BUS_3&DEV_14&FUNC_0' |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sniEisaFunctionEntry |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SniEisaFunctionEntry |
|
|
| sniEisaBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.1 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniEisaSlotNo |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.2 |
| Slot number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniEisaFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.3 |
| Eisa function number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniEisaSlotType |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.4 |
| Type of the slot |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
expansion-slot(1), embedded-slot(2), virtual-slot(3), reserved(4) |
|
| sniEisaConfigurationComplete |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.5 |
| True if board is completely configured |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2), unknown(3) |
|
| sniEisaType |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.6 |
| Type and subtype as ASCII string |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sniEisaValid |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.7 |
| True, if the slot contains a correctly configured eisa board. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2), unknown(3) |
|
| sniEisaId |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.8 |
| The eisa id of the board. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sniEisaName |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.9 |
| Visual name of the board. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sniEisaAgentType |
1.3.6.1.4.1.231.2.10.2.2.4.2.1.1.10 |
| |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), ethernet-adapter(2), token-ring-adapter(3), fddi-adapter(4), hd-adapter(5), extended-hd-adapter(6), cpu(7) |
|
| sniPciFunctionEntry |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SniPciFunctionEntry |
|
|
| sniPciBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.1 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciDeviceNo |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.2 |
| Device number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.3 |
| Function number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciVendorId |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.4 |
| Identifies the manufacturer of the device. This must be a value
allocated by the PCI SIG. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciDeviceId |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.5 |
| Identifies the particular device. This value is assigned by the
manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciRevisionId |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.6 |
| Specifies the revision level of the device described by
sniPciDeviceId. This value is assigned by the manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciBaseClass |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.7 |
| Identifies type of the device, according to the PCI classification
scheme. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
old-type-device(0), mass-storage-controller(1), network-controller(2), display-controller(3), multimedia-device(4), memory-controller(5), bridge-device(6), simple-communication-controller(7), base-system-peripheral(8), input-device(9), docking-station(10), processor(11), serial-bus-controller(12), wireless-controller(13), io-controller(14), satellite-communication-controller(15), encryption-device(16), signal-processor(17), unknown-device(255) |
|
| sniPciSubClass |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.8 |
| Identifies the subtype, if any, of the device, according to the PCI
classification scheme. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciProgIf |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.9 |
| Identifies the register-level programming interface, if any, for the
device, according to the PCI classification scheme. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciBuiltInSelfTest |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.10 |
| Indicates if the device does support built-in self test. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
built-in(1), not-built-in(2), unknown(3) |
|
| sniPciInterruptPin |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.11 |
| Indicates which interrupt pin the PCI device uses. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
not-implemented(0), inta(1), intb(2), intc(3), intd(4) |
|
| sniPciInterruptLine |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.12 |
| Indicates the input of the system interrupt controller that the
interrupt pin is connected to. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciSpecificData |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.13 |
| This is device specific data found in the COMMON CONFIGURATION SPACE.
This field is currently not used and therefor filled with zeros. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| sniPciSecondaryBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.14 |
| Valid only for a bridge device. This is the index of the bridge's
secondary bus (-1 = no bus index available; ignore this field). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciSecondaryBusType |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.15 |
| Valid only for a bridge device. This is the type of the bridge's secondary bus.
Following values are defined (according to PCI Local bus specification, Revision 2.1, values
are incremented by 1):
00h: Unknown value; ignore this field
01h: Host bridge (bridge to CPU bus)
02h: ISA bridge
03h: EISA bridge
04h: MCA bridge
05h: PCI-to-PCI bridge
06h: PCMCIA bridge
07h: NuBus bridge
80h: Other bridge device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciSubVendorId |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.16 |
| Identifies the particular device. This value is assigned by the manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPciSubDeviceId |
1.3.6.1.4.1.231.2.10.2.2.4.3.1.1.17 |
| Identifies the particular device. This value is assigned by the manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniMemoryTable |
1.3.6.1.4.1.231.2.10.2.2.4.4.1 |
| Table of all memory entries |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SniMemoryEntry |
|
| sniMemoryEntry |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SniMemoryEntry |
|
|
| sniMemBusType |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.1 |
| Type of the bus |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), isa(2), eisa(3), pci(5) |
|
| sniMemBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.2 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniMemSlotDevice |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.3 |
| Slot or Device number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniMemFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.4 |
| Function number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniMemoryNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.5 |
| Memory number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusSharedMemory |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.6 |
| Type of shared memory |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
not-used(1), other(2), system(3), expanded(4), virtual(5) |
|
| sniBusMemoryStart |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.7 |
| Start address (low DWORD part) of shared memory or 0 if not used |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusMemoryLength |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.8 |
| Length of shared memory or 0 if not used |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusMemoryStartHigh |
1.3.6.1.4.1.231.2.10.2.2.4.4.1.1.9 |
| Start address (high DWORD part) of shared memory or 0 if not used |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniInterruptEntry |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SniInterruptEntry |
|
|
| sniIntBusType |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.1 |
| Type of the bus |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), isa(2), eisa(3), pci(5) |
|
| sniIntBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.2 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniIntSlotDevice |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.3 |
| Slot or Device number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniIntFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.4 |
| Function number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniInterruptNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.5 |
| Interrupt number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusInterruptUsed |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.6 |
| True if and only if not unknown and an interrupt is used |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2), unknown(3) |
|
| sniBusInterruptLevel |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.7 |
| interrupt level |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), edge-triggered(2), level-triggered(3) |
|
| sniBusInterruptShared |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.8 |
| True if and only if not unknown and an interrupt is shared |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2), unknown(3) |
|
| sniBusInterruptNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.2.1.9 |
| interrupt number used |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniDMATable |
1.3.6.1.4.1.231.2.10.2.2.4.4.3 |
| Table of all dma entries |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SniDMAEntry |
|
| sniDMAEntry |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SniDMAEntry |
|
|
| sniDMABusType |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.1 |
| Type of the bus |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), isa(2), eisa(3), pci(5) |
|
| sniDMABusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.2 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniDMASlotDevice |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.3 |
| Slot or Device number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniDMAFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.4 |
| Function number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniDMANo |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.5 |
| DMA number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusDMAChannel |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.6 |
| DMA channel |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusDMATiming |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.7 |
| DMA timing |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), default-timing(2), type-a-timing(3), type-b-timing(4) |
|
| sniBusDMATransferSize |
1.3.6.1.4.1.231.2.10.2.2.4.4.3.1.8 |
| DMA transfer size |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), bit-8(2), bit-16(3), bit-32(4) |
|
| sniPortTable |
1.3.6.1.4.1.231.2.10.2.2.4.4.4 |
| Table of all port entries |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SniPortEntry |
|
| sniPortEntry |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SniPortEntry |
|
|
| sniPortBusType |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.1 |
| Type of the bus |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(0), isa(2), eisa(3), pci(5) |
|
| sniPortBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.2 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPortSlotDevice |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.3 |
| Slot or Device number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPortFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.4 |
| Function number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniPortNo |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.5 |
| Port number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusIOFirstPort |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.6 |
| First io port used |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusIONoOfPorts |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.7 |
| Number of io ports used |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusIOPortShared |
1.3.6.1.4.1.231.2.10.2.2.4.4.4.1.8 |
| True if io port is shared |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2), unknown(3) |
|
| sniBusCompBusType |
1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.1 |
| Type of the bus (ISA, EISA, PCI) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), isa(2), eisa(3), pci(5) |
|
| sniBusCompBusNumber |
1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.2 |
| Bus number for the specified bus type (1..n) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusCompDeviceNo |
1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.3 |
| Device number (PCI) or slot number (ISA, EISA) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusCompSlotNo |
1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.4 |
| Physical slot number (0..n), -1 if unknown |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sniBusCompEisaPciId |
1.3.6.1.4.1.231.2.10.2.2.4.5.1.1.7 |
| EISA ID for EISA components, PCI vendor/device ID for PCI components (hexadecimal notation) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| svPciFunctionEntry |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1 |
| |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SvPciFunctionEntry |
|
|
| svPciSegmentNo |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.1 |
| PCI segment number (zero based) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.2 |
| Index of the bus based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciDeviceNo |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.3 |
| Device number based on 0 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciFunctionNo |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.4 |
| Function number based on 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciVendorId |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.5 |
| Identifies the manufacturer of the device. This must be a value
allocated by the PCI SIG. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciSubVendorId |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.6 |
| Identifies the particular device. This value is assigned by the manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciDeviceId |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.7 |
| Identifies the particular device. This value is assigned by the
manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciSubDeviceId |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.8 |
| Identifies the particular device. This value is assigned by the manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciRevisionId |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.9 |
| Specifies the revision level of the device described by
svPciDeviceId. This value is assigned by the manufacturer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciBaseClass |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.10 |
| Identifies type of the device, according to the PCI classification
scheme. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
old-type-device(0), mass-storage-controller(1), network-controller(2), display-controller(3), multimedia-device(4), memory-controller(5), bridge-device(6), simple-communication-controller(7), base-system-peripheral(8), input-device(9), docking-station(10), processor(11), serial-bus-controller(12), wireless-controller(13), io-controller(14), satellite-communication-controller(15), encryption-device(16), signal-processor(17), unknown-device(255) |
|
| svPciSubClass |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.11 |
| Identifies the subtype, if any, of the device, according to the PCI
classification scheme. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciProgIf |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.12 |
| Identifies the register-level programming interface, if any, for the
device, according to the PCI classification scheme. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciBuiltInSelfTest |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.13 |
| Indicates if the device does support built-in self test. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
built-in(1), not-built-in(2), unknown(3) |
|
| svPciInterruptPin |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.14 |
| Indicates which interrupt pin the PCI device uses. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
not-implemented(0), inta(1), intb(2), intc(3), intd(4) |
|
| svPciInterruptLine |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.15 |
| Indicates the input of the system interrupt controller that the
interrupt pin is connected to. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciSpecificData |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.16 |
| This is device specific data found in the COMMON CONFIGURATION SPACE.
This field is currently not used and therefor filled with zeros. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| svPciSecondaryBusIndex |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.17 |
| Valid only for a bridge device. This is the index of the bridge's
secondary bus (-1 = no bus index available; ignore this field). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciSecondaryBusType |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.18 |
| Valid only for a bridge device. This is the type of the bridge's secondary bus.
Following values are defined (according to PCI Local bus specification, Revision 2.1, values
are incremented by 1):
00h: Unknown value; ignore this field
01h: Host bridge (bridge to CPU bus)
02h: ISA bridge
03h: EISA bridge
04h: MCA bridge
05h: PCI-to-PCI bridge
06h: PCMCIA bridge
07h: NuBus bridge
80h: Other bridge device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| svPciDeviceName |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.21 |
| Operating system independent name of device in readable form |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| svPciAdapterUniqueId |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.22 |
| Unigue adapter type specific ID. MAC address for lan adapters. WWN for fibre channel adapters. Otherwise empty. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| svPciAdapterSpecificData |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.23 |
| Specific data for this adapter. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| svPciCompLocationKey |
1.3.6.1.4.1.231.2.10.2.2.4.6.1.1.25 |
| Unique device location key, used for identifying the component; e.g. 'TYPE_PCI&BUS_3&DEV_14&FUNC_0' or 'TYPE_PCI&BUS_3&DEV_14&FUNC_0&SEG_1' |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|