SNANET-MIB

File: SNANET-MIB.mib (90787 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

Counter enterprises Gauge
TimeTicks DisplayString OBJECT-TYPE
TRAP-TYPE

Defined Types

T5nodeEntry  
SEQUENCE    
  t5nodeIndex INTEGER
  t5nodeDomainName DisplayString
  t5nodeOperState INTEGER
  t5nodeSubareaNumber INTEGER 1..65535
  t5nodeSscpName DisplayString
  t5nodeNetworkName DisplayString
  t5nodeSscpId INTEGER 0..65535
  t5nodePuName DisplayString

T5CdrmEntry  
SEQUENCE    
  t5CdrmT5nodeIndex INTEGER
  t5CdrmName DisplayString
  t5CdrmSnaName DisplayString
  t5CdrmType INTEGER
  t5CdrmAdminState INTEGER
  t5CdrmOperState INTEGER
  t5CdrmSubareaNumber INTEGER 1..65535
  t5CdrmNetworkName DisplayString
  t5CdrmElementAddress INTEGER 1..32767

T5CdrscEntry  
SEQUENCE    
  t5CdrscT5nodeIndex INTEGER
  t5CdrscName DisplayString
  t5CdrscSnaName DisplayString
  t5CdrscCdrmName DisplayString
  t5CdrscAdminState INTEGER
  t5CdrscOperState INTEGER
  t5CdrscSessions Counter
  t5CdrscDlmName DisplayString
  t5CdrscCosName DisplayString

T5DlmEntry  
SEQUENCE    
  t5DlmT5nodeIndex INTEGER
  t5DlmName DisplayString
  t5DlmSnaName DisplayString
  t5DlmFmprof OCTET STRING
  t5DlmTsprof OCTET STRING
  t5DlmPriprot OCTET STRING
  t5DlmSecprot OCTET STRING
  t5DlmComprot OCTET STRING
  t5DlmRusizes OCTET STRING
  t5DlmPservic OCTET STRING
  t5DlmPsndpac OCTET STRING
  t5DlmPrcvpac OCTET STRING
  t5DlmSsndpac OCTET STRING
  t5DlmSrcvpac OCTET STRING
  t5DlmEncr INTEGER 0..15
  t5DlmBindType INTEGER 0..1
  t5DlmCos DisplayString

T5CosEntry  
SEQUENCE    
  t5CosT5nodeIndex INTEGER
  t5CosName DisplayString
  t5CosSnaName DisplayString
  t5CosVrids OCTET STRING

T5AliasEntry  
SEQUENCE    
  t5AliasT5nodeIndex INTEGER
  t5AliasName DisplayString
  t5AliasResourceId OBJECT IDENTIFIER

SaErEntry  
SEQUENCE    
  saErT5nodeIndex INTEGER
  saErDestinationSubarea INTEGER 1..65535
  saErNumber INTEGER 1..15
  saErTgNumber INTEGER 0..255
  saErOperState INTEGER

SaVrEntry  
SEQUENCE    
  saVrT5nodeIndex INTEGER
  saVrErNumber INTEGER 0..15
  saVrNumber INTEGER 1..15
  saVrTransmissionPriority INTEGER 0..2
  saVrWindowSize INTEGER 0..255
  saVrMinWindowSize INTEGER 0..255
  saVrMaxWindowSize INTEGER 0..255
  saVrPacingCount INTEGER 0..255

SaTgEntry  
SEQUENCE    
  saTgT5nodeIndex INTEGER
  saTgNumber INTEGER 1..255
  saTgAdjacentSubarea INTEGER 1..65535
  saTgOperState INTEGER
  saTgMaxSendPiuSize INTEGER 1..65535
  saTgMaxReceivePiuSize INTEGER 1..65535
  saTgActiveTime TimeTicks
  saTgLastStateChange TimeTicks
  saTgSentBytes Counter
  saTgReceivedBytes Counter
  saTgSentBtus Counter
  saTgReceivedBtus Counter

SaTgLinkEntry  
SEQUENCE    
  saTgLinkT5nodeIndex INTEGER
  saTgLinkIndex INTEGER
  saTgLinkTgNumber INTEGER 0..255
  saTgLinkAdjacentSubarea INTEGER 1..65535
  saTgLinkName DisplayString
  saTgLinkOperState INTEGER
  saTgLinkAdminState INTEGER
  saTgLinkType INTEGER
  saTgLinkSpecific OBJECT IDENTIFIER
  saTgLinkActiveTime TimeTicks
  saTgLinkLastStateChange TimeTicks
  saTgLinkSentBytes Counter
  saTgLinkReceivedBytes Counter
  saTgLinkSentBtus Counter
  saTgLinkReceivedBtus Counter

T2nodeEntry  
SEQUENCE    
  t2nodeT5nodeIndex INTEGER
  t2nodeIndex INTEGER
  t2nodeName DisplayString
  t2nodeType INTEGER
  t2nodeBlockNum DisplayString
  t2nodeIdNum DisplayString
  t2nodeMaxPiu INTEGER
  t2nodeLinkType INTEGER
  t2nodeLinkSpecific OBJECT IDENTIFIER
  t2nodeOperState INTEGER
  t2nodeAdminState INTEGER
  t2nodeStartTime TimeTicks
  t2nodeLastStateChange TimeTicks
  t2nodeActFailureReason INTEGER

T2nodeStatsEntry  
SEQUENCE    
  t2nodeStatsT5nodeIndex INTEGER 1..65535
  t2nodeStatsIndex INTEGER 1..65535
  t2nodeStatsSentBytes Counter
  t2nodeStatsReceivedBytes Counter
  t2nodeStatsSentPius Counter
  t2nodeStatsReceivedPius Counter
  t2nodeStatsSentNegativeResps Counter
  t2nodeStatsReceivedNegativeResps Counter
  t2nodeStatsActiveLus Gauge
  t2nodeStatsActLus Gauge
  t2nodeStatsInActLus Gauge
  t2nodeStatsBindLus Gauge

SnaLuEntry  
SEQUENCE    
  snaLuT5nodeIndex INTEGER
  snaLuT2nodeIndex INTEGER
  snaLuIndex INTEGER
  snaLuName DisplayString
  snaLuType INTEGER
  snaLuLocalAddress OCTET STRING
  snaLuUserName DisplayString
  snaLuPoolName DisplayString
  snaLuOperState INTEGER
  snaLuAdminState INTEGER
  snaLuLastStateChange TimeTicks
  snaLuActiveTime TimeTicks
  snaLuBindFailureReason INTEGER

AppLuEntry  
SEQUENCE    
  appLuT5nodeIndex INTEGER
  appLuIndex INTEGER
  appLuName DisplayString
  appLuConversionType INTEGER
  appLuHostInterfaceType INTEGER
  appLuApplicationName DisplayString
  appLuGatewayName DisplayString
  appLuAdminState INTEGER
  appLuOperState INTEGER
  appLuActiveTime TimeTicks
  appLuLastStateChange TimeTicks
  appLuBindFailureReason INTEGER

AppLuBatchDeviceEntry  
SEQUENCE    
  appLuBatchDeviceT5nodeIndex INTEGER
  appLuBatchDeviceLuIndex INTEGER
  appLuBatchDeviceName DisplayString
  appLuBatchDeviceType INTEGER
  appLuBatchDeviceNumber INTEGER

SnaSessionEntry  
SEQUENCE    
  snaSessT5nodeIndex INTEGER
  snaSessNauName DisplayString
  snaSessNauSessNumber INTEGER 1..65535
  snaSessType INTEGER
  snaSessNauElementAddress INTEGER 1..65535
  snaSessState INTEGER
  snaSessActiveTime Counter
  snaSessSentBytes Counter
  snaSessReceivedBytes Counter
  snaSessSentRus Counter
  snaSessReceivedRus Counter
  snaSessSentNegativeResps Counter
  snaSessReceivedNegativeResps Counter
  snaSessPartnerNauName DisplayString
  snaSessPartnerNauSubarea INTEGER
  snaSessPartnerNauElementAddress INTEGER 1..65535
  snaSessVirtualRouteNumber INTEGER 0..7
  snaSessTransmissionPriority INTEGER 0..2
  snaSessProcCorrelationId OCTET STRING
  snaSessPluIndicator INTEGER
  snaSessModeName DisplayString

SnaLink802Dot2Entry  
SEQUENCE    
  snaLink802Dot2T5nodeIndex INTEGER 1..65535
  snaLink802Dot2Index INTEGER 1..65535
  snaLink802Dot2SourceAddress OCTET STRING
  snaLink802Dot2SourceSAP INTEGER
  snaLink802Dot2DestinationAddress OCTET STRING
  snaLink802Dot2DestinationSAP INTEGER
  snaLink802Dot2MediaType DisplayString
  snaLink802Dot2Role INTEGER
  snaLink802Dot2LineName DisplayString
  snaLink802Dot2Port INTEGER
  snaLink802Dot2IfIndex INTEGER

SnaLinkSdlcEntry  
SEQUENCE    
  snaLinkSdlcT5nodeIndex INTEGER
  snaLinkSdlcIndex INTEGER
  snaLinkSdlcDestinationStationAddr OCTET STRING
  snaLinkSdlcStationRole INTEGER
  snaLinkSdlcLineName DisplayString
  snaLinkSdlcPort OCTET STRING
  snaLinkSdlcIfIndex INTEGER

SnaLinkQllcEntry  
SEQUENCE    
  snaLinkQllcT5nodeIndex INTEGER 1..65535
  snaLinkQllcIndex INTEGER 1..65535
  snaLinkQllcLcn INTEGER
  snaLinkQllcSourceDteAddr OCTET STRING
  snaLinkQllcDestinationDteAddr OCTET STRING
  snaLinkQllcRole INTEGER
  snaLinkQllcPdnGroupName DisplayString
  snaLinkQllcLineName DisplayString
  snaLinkQllcPort OCTET STRING
  snaLinkQllcIfIndex INTEGER

SnaLinkChannelEntry  
SEQUENCE    
  snaLinkChannelT5nodeIndex INTEGER
  snaLinkChannelIndex INTEGER
  snaLinkChannelLineName DisplayString
  snaLinkChannelPort OCTET STRING
  snaLinkChannelIfIndex INTEGER

SnaLinkIntEntry  
SEQUENCE    
  snaLinkIntT5nodeIndex INTEGER
  snaLinkIntIndex INTEGER
  snaLinkIntServiceType INTEGER
  snaLinkIntOutputCredit INTEGER 1..15
  snaLinkIntOutputPacing INTEGER 1..15

Defined Values

unisys 1.3.6.1.4.1.223
OBJECT IDENTIFIER    

dcp 1.3.6.1.4.1.223.8
OBJECT IDENTIFIER    

snanet 1.3.6.1.4.1.223.8.3
OBJECT IDENTIFIER    

prodInfo 1.3.6.1.4.1.223.8.3.1
OBJECT IDENTIFIER    

t5node 1.3.6.1.4.1.223.8.3.2
OBJECT IDENTIFIER    

subarea 1.3.6.1.4.1.223.8.3.3
OBJECT IDENTIFIER    

snaNau 1.3.6.1.4.1.223.8.3.4
OBJECT IDENTIFIER    

snaSession 1.3.6.1.4.1.223.8.3.5
OBJECT IDENTIFIER    


prodInfoDesc 1.3.6.1.4.1.223.8.3.1.1
A textual description of the software release. Includes the release level and the internal revision level (example: SNA/net Release 5R2 Revision 5.2.10 Installed 06/03/94 07:10 ).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

prodInfoFeatures 1.3.6.1.4.1.223.8.3.1.2
A value which indicates the features included in the software release. The value is a sum. This sum initially takes the value zero, then for each feature a value is assigned corresponding to a power of 2, such that a unique number is generated for each combination of features. Feature 1 Cross-Domain Resource Manager 2 Terminal Connect 4 PU T2.0 Inverted 8 Node Type 2.1 Low Entry Node (len) 16 Network Packet-Switching Interface (NPSI) 32 Remote Batch File Transfer Extended (RBFTE)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t5nodeTable 1.3.6.1.4.1.223.8.3.2.1
This table contains information about the Type 5 node functionality (SSCP) provided by the SNA/net product. Multiple nodes can be provided by a single SNA/net product.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T5nodeEntry

t5nodeEntry 1.3.6.1.4.1.223.8.3.2.1.1
Entry contains information about the Type 5 node functionality (SSCP).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T5nodeEntry  

t5nodeIndex 1.3.6.1.4.1.223.8.3.2.1.1.1
SNA/net can appear as more than one t5node. Used to index instances of this object. Value is assigned by the agent and remains constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t5nodeDomainName 1.3.6.1.4.1.223.8.3.2.1.1.2
The configured name for this domain. This is also the t5nodeSscpName, if t5nodeSscpName is a 0 length string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5nodeOperState 1.3.6.1.4.1.223.8.3.2.1.1.3
The operational state of the Type 5 Domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3), standby(4)  

t5nodeSubareaNumber 1.3.6.1.4.1.223.8.3.2.1.1.4
The subarea number for this domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

t5nodeSscpName 1.3.6.1.4.1.223.8.3.2.1.1.5
The name of the SSCP. Must be unique in the SNA subnetwork. It must match the name of the VTAM CDRM macro that defines this t5node as a CDRM to VTAM. May be a zero length string, in which case, the t5nodeDomainName is the name of the SSCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

t5nodeNetworkName 1.3.6.1.4.1.223.8.3.2.1.1.6
The SNA network name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5nodeSscpId 1.3.6.1.4.1.223.8.3.2.1.1.7
This value is used in ACTCDRM messages sent to VTAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

t5nodePuName 1.3.6.1.4.1.223.8.3.2.1.1.8
The PU identifier of this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CdrmTable 1.3.6.1.4.1.223.8.3.2.2
This table contains information about other Crossdomain Resource Managers known to this type 5 node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T5CdrmEntry

t5CdrmEntry 1.3.6.1.4.1.223.8.3.2.2.1
The entry contains information about CDRMs. Variables have read-only access. The variable t5CdrmAdminState has read-write access and is used to control a CDRM.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T5CdrmEntry  

t5CdrmT5nodeIndex 1.3.6.1.4.1.223.8.3.2.2.1.1
Index in the t5nodetable of the t5node this CDRM is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t5CdrmName 1.3.6.1.4.1.223.8.3.2.2.1.2
The configured name of the CDRM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CdrmSnaName 1.3.6.1.4.1.223.8.3.2.2.1.3
The name of the CDRM as it is known in the SNA network. May be a zero length string, in which case, the t5CdrmName is the SNA name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

t5CdrmType 1.3.6.1.4.1.223.8.3.2.2.1.4
Identifies the type of CDRM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER external(1), snanet(2)  

t5CdrmAdminState 1.3.6.1.4.1.223.8.3.2.2.1.5
Used by the Management Station to control the CDRM. Values up (2) and down (3) can be read or written, while value other (1) is read-only and indicates that this variable has not been set since reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

t5CdrmOperState 1.3.6.1.4.1.223.8.3.2.2.1.6
The current operational state of the CDRM in relation to this Type 5 node SSCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), active(3)  

t5CdrmSubareaNumber 1.3.6.1.4.1.223.8.3.2.2.1.7
The subarea number for the CDRM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

t5CdrmNetworkName 1.3.6.1.4.1.223.8.3.2.2.1.8
The SNA network name for the CDRM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CdrmElementAddress 1.3.6.1.4.1.223.8.3.2.2.1.9
Element Address assigned to this CDRM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32767  

t5CdrscTable 1.3.6.1.4.1.223.8.3.2.3
This table contains information about other Crossdomain Resources known to this type 5 node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T5CdrscEntry

t5CdrscEntry 1.3.6.1.4.1.223.8.3.2.3.1
The entry contains information about a CDRSC. Variables have read-only access. The variable t5CdrscAdminState has read-write access and is used to control a CDRSC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T5CdrscEntry  

t5CdrscT5nodeIndex 1.3.6.1.4.1.223.8.3.2.3.1.1
Index in the t5nodetable of the t5node this CDRSC is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t5CdrscName 1.3.6.1.4.1.223.8.3.2.3.1.2
The configured name of the CDRSC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CdrscSnaName 1.3.6.1.4.1.223.8.3.2.3.1.3
The name of the CDRSC as it is known in the SNA Network. The SnaName is the same a the t5CdrscName when this value is a zero length string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

t5CdrscCdrmName 1.3.6.1.4.1.223.8.3.2.3.1.4
The name the CDRM which owns this CDRSC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CdrscAdminState 1.3.6.1.4.1.223.8.3.2.3.1.5
Used by the Management Station to control the use of the CDRSC. Values up (2) and down (3) may be read or written, while the value other(1) read-only and indicates this variable has not been set since the last reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

t5CdrscOperState 1.3.6.1.4.1.223.8.3.2.3.1.6
The current operational state of the CDRSC in relation to this Type 5 node SSCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), active(3)  

t5CdrscSessions 1.3.6.1.4.1.223.8.3.2.3.1.7
The number of active SNA LU-LU sessions for this CDRSC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t5CdrscDlmName 1.3.6.1.4.1.223.8.3.2.3.1.8
The name of the Default Logon mode table used by this CDRSC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CdrscCosName 1.3.6.1.4.1.223.8.3.2.3.1.9
The name of the Class of Service table used by this CDRSC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5DlmTable 1.3.6.1.4.1.223.8.3.2.4
This table contains information about Default Logon Mode Tables used by the SSCP for LU-LU session establishment.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T5DlmEntry

t5DlmEntry 1.3.6.1.4.1.223.8.3.2.4.1
The entry contains a Default Logon Mode Table entry. All variables are read-only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T5DlmEntry  

t5DlmT5nodeIndex 1.3.6.1.4.1.223.8.3.2.4.1.1
Index in the t5nodetable of the t5node this DLM is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t5DlmName 1.3.6.1.4.1.223.8.3.2.4.1.2
The configured name of the Default Logon Mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5DlmSnaName 1.3.6.1.4.1.223.8.3.2.4.1.3
The name of the Default Logon Mode as it is known in the SNA network. May contain a zero length string, in which case, the t5DlmName is the SNA name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

t5DlmFmprof 1.3.6.1.4.1.223.8.3.2.4.1.4
The Function Management Profile type, a value from 0 to 18 hexadecimal(byte 1 in the session parameter field).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmTsprof 1.3.6.1.4.1.223.8.3.2.4.1.5
The Transmission Services profile type, a value from 1 to 17 hexadecimal(byte 2 in the session parameter field).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmPriprot 1.3.6.1.4.1.223.8.3.2.4.1.6
The primary logical unit protocol, a value from 0 to 0FF hexadecimal(byte 3 in the session parameter field).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmSecprot 1.3.6.1.4.1.223.8.3.2.4.1.7
The secondary logical unit protocol, a value from 0 to 0FF hexadecimal(byte 4 in the session parameter field).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmComprot 1.3.6.1.4.1.223.8.3.2.4.1.8
The common logical unit protocol, a value from 0 to 0FFFF hexadecimal(byte 5 and 6 in the session parameter field).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

t5DlmRusizes 1.3.6.1.4.1.223.8.3.2.4.1.9
The maximum length of data request units in bytes. A four digit hexadecimal value is provided in the same format as for the ACF/VTAM generation(bytes 9 and 10 in the session parameter field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

t5DlmPservic 1.3.6.1.4.1.223.8.3.2.4.1.10
The logical unit presentation services profile and usage field(bytes 13 through 24 in the session parameter field). A 24 digit hexadecimal number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(12)  

t5DlmPsndpac 1.3.6.1.4.1.223.8.3.2.4.1.11
The primary send pacing count(byte 11 in the session parameter field), a value from 0 to 63 decimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmPrcvpac 1.3.6.1.4.1.223.8.3.2.4.1.12
The primary receive pacing count(byte 12 in the session parameter field), a value from 0 to 63 decimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmSsndpac 1.3.6.1.4.1.223.8.3.2.4.1.13
The secondary send pacing count(byte 7 in the session parameter field), a value from 0 to 63 decimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmSrcvpac 1.3.6.1.4.1.223.8.3.2.4.1.14
The secondary receive pacing count(byte 8 in the session parameter field), a value from 0 to 63 decimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

t5DlmEncr 1.3.6.1.4.1.223.8.3.2.4.1.15
The encryption/decryption type expected by the logical unit(first four bits of byte 26 in the session parameter field), a value from 0 to F hexadecimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

t5DlmBindType 1.3.6.1.4.1.223.8.3.2.4.1.16
The BIND type, a value of 0 or 1. 0 means a negotiable BIND 1 means a non-negotiable BIND.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

t5DlmCos 1.3.6.1.4.1.223.8.3.2.4.1.17
The name of the class of service to be used for a session that uses this logon mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CosTable 1.3.6.1.4.1.223.8.3.2.5
This table contain class of service (COS) entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T5CosEntry

t5CosEntry 1.3.6.1.4.1.223.8.3.2.5.1
The entry contains a class of service entry. All variables are read-only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T5CosEntry  

t5CosT5nodeIndex 1.3.6.1.4.1.223.8.3.2.5.1.1
Index in the t5nodetable of the t5node this COS is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t5CosName 1.3.6.1.4.1.223.8.3.2.5.1.2
The configured name of the class of service entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5CosSnaName 1.3.6.1.4.1.223.8.3.2.5.1.3
The name of the class of service entry as it is known in the SNA Network. May be a zero length string, in which case, the t5CosName is the SNA name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

t5CosVrids 1.3.6.1.4.1.223.8.3.2.5.1.4
A list of virtual routes, in hierarchical order, that are used for LU-LU session traffic. The list is octet pairs in the form x,y where x is the virtual route number from 0 to 7, and y is the transmission priority from 0 to 3. Up to 24 ordered pairs are possible (vr1,tp1 vr2,tp2 ...vr24,tp24).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2..48)  

t5AliasTable 1.3.6.1.4.1.223.8.3.2.6
This table is a crossreference for alias names to SNA/net resource names. The current use of this table is for alternate logon names for Crossdomain resources.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T5AliasEntry

t5AliasEntry 1.3.6.1.4.1.223.8.3.2.6.1
The entry contains the alias name and a reference to the SNA (CDRSC) resource it refers to. All variables are read-only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T5AliasEntry  

t5AliasT5nodeIndex 1.3.6.1.4.1.223.8.3.2.6.1.1
Index in the t5nodetable of the t5node this Alias Name is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t5AliasName 1.3.6.1.4.1.223.8.3.2.6.1.2
The configured alias name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t5AliasResourceId 1.3.6.1.4.1.223.8.3.2.6.1.3
A reference to the SNA resource (CDRSC) identified by this Alias Name. It is the object identifier representing the instance of the index variable of the resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

saErTable 1.3.6.1.4.1.223.8.3.3.1
This table contains information about explicit routes between this subarea and other network subareas.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SaErEntry

saErEntry 1.3.6.1.4.1.223.8.3.3.1.1
This entry contain information about an explicit route.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SaErEntry  

saErT5nodeIndex 1.3.6.1.4.1.223.8.3.3.1.1.1
Index in the t5nodetable of the t5node this explicit route is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

saErDestinationSubarea 1.3.6.1.4.1.223.8.3.3.1.1.2
The destination subarea number for this Expicit Route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

saErNumber 1.3.6.1.4.1.223.8.3.3.1.1.3
The number of the Explicit Route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

saErTgNumber 1.3.6.1.4.1.223.8.3.3.1.1.4
The Transmission Group number associated with this Explicit Route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

saErOperState 1.3.6.1.4.1.223.8.3.3.1.1.5
The current operational state of the Explicit Route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), inoperative(2), operative(3), actPend(4), innActPend(5), innAct(6), actNoSend(7), active(8)  

saVrTable 1.3.6.1.4.1.223.8.3.3.2
This table contains information about virtual routes between this subarea and other network subareas. Virtual routes are logical connections between subareas and are mapped to explicit routes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SaVrEntry

saVrEntry 1.3.6.1.4.1.223.8.3.3.2.1
This entry contains information about a virtual route. All variables are read-only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SaVrEntry  

saVrT5nodeIndex 1.3.6.1.4.1.223.8.3.3.2.1.1
Index in the t5nodetable of the t5node this virtual route is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

saVrErNumber 1.3.6.1.4.1.223.8.3.3.2.1.2
The expicit route to which this virtual route belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

saVrNumber 1.3.6.1.4.1.223.8.3.3.2.1.3
The number of the Virtual Route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

saVrTransmissionPriority 1.3.6.1.4.1.223.8.3.3.2.1.4
The transmission priority for this virtual route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

saVrWindowSize 1.3.6.1.4.1.223.8.3.3.2.1.5
The initial window size for this virtual route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

saVrMinWindowSize 1.3.6.1.4.1.223.8.3.3.2.1.6
The minimum window size for this virtual route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

saVrMaxWindowSize 1.3.6.1.4.1.223.8.3.3.2.1.7
The maximum window size for this virtual route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

saVrPacingCount 1.3.6.1.4.1.223.8.3.3.2.1.8
The pacing count for this virtual route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

saTransmissionGroup 1.3.6.1.4.1.223.8.3.3.3
OBJECT IDENTIFIER    

saTgTable 1.3.6.1.4.1.223.8.3.3.3.1
This table contains information about transmission groups between this subarea and other network subareas. Entries are dynamically added to this table as they are learned from TG link activations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SaTgEntry

saTgEntry 1.3.6.1.4.1.223.8.3.3.3.1.1
This entry contains information about a transmission group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SaTgEntry  

saTgT5nodeIndex 1.3.6.1.4.1.223.8.3.3.3.1.1.1
Index in the t5nodetable of the t5node this transmission group is associated with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

saTgNumber 1.3.6.1.4.1.223.8.3.3.3.1.1.2
The number of this transmission group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

saTgAdjacentSubarea 1.3.6.1.4.1.223.8.3.3.3.1.1.3
The adjacent subarea number with which this transmission group is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

saTgOperState 1.3.6.1.4.1.223.8.3.3.3.1.1.4
The current operational state of this transmission group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2), pendActive(3), pendInactive(4)  

saTgMaxSendPiuSize 1.3.6.1.4.1.223.8.3.3.3.1.1.5
The maximum Path Information Unit size in bytes that may be sent on this Tranmission Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65565  

saTgMaxReceivePiuSize 1.3.6.1.4.1.223.8.3.3.3.1.1.6
The maximum Path Information Unit size in bytes that may be received on this Tranmission Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

saTgActiveTime 1.3.6.1.4.1.223.8.3.3.3.1.1.7
The value of sysUpTime when this transmission group became active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

saTgLastStateChange 1.3.6.1.4.1.223.8.3.3.3.1.1.8
The value of sysUpTime when the last state change occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

saTgSentBytes 1.3.6.1.4.1.223.8.3.3.3.1.1.9
The number of bytes sent on this transmission group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

saTgReceivedBytes 1.3.6.1.4.1.223.8.3.3.3.1.1.10
The number of bytes received on transmission group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

saTgSentBtus 1.3.6.1.4.1.223.8.3.3.3.1.1.11
The number of Basic Transmission Units sent on this transmission group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

saTgReceivedBtus 1.3.6.1.4.1.223.8.3.3.3.1.1.12
The number of Basic Transmission Units received on this transmission group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

saTgLinkTable 1.3.6.1.4.1.223.8.3.3.3.2
This table contains an entry for each link which may be used for a transmission group. The links are not associated with a transmission group until saTgLinkOperState is active (2).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SaTgLinkEntry

saTgLinkEntry 1.3.6.1.4.1.223.8.3.3.3.2.1
Contains configuration and state information about TG links. Variables have read-only access. The variable saTgLinkAdminState has read-write access and is used to control a TG link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SaTgLinkEntry  

saTgLinkT5nodeIndex 1.3.6.1.4.1.223.8.3.3.3.2.1.1
Identifies the Type 5 node with which this transmission group link is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

saTgLinkIndex 1.3.6.1.4.1.223.8.3.3.3.2.1.2
Unique index of this transmisson group link. The value is assigned by the agent and is unique among TG and PU links.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

saTgLinkTgNumber 1.3.6.1.4.1.223.8.3.3.3.2.1.3
The transmission group number to which this link is associated. Contains a value of zero (0) when saTgLinkOperState is inactive(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

saTgLinkAdjacentSubarea 1.3.6.1.4.1.223.8.3.3.3.2.1.4
The adjacent subarea number with which this transmission group is associated. Contains a value of zero when saTgLinkOperState in inactive(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

saTgLinkName 1.3.6.1.4.1.223.8.3.3.3.2.1.5
The administratively assigned name of the transmission group link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

saTgLinkOperState 1.3.6.1.4.1.223.8.3.3.3.2.1.6
The current operational state of this transmission group link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

saTgLinkAdminState 1.3.6.1.4.1.223.8.3.3.3.2.1.7
Used by the Management Station to control the transmission group Link. Values up (2) and down (3) can be read or written, while value other (1) is read-only and indicates that this variable has not been set since reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

saTgLinkType 1.3.6.1.4.1.223.8.3.3.3.2.1.8
The type of transmission group link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), link8022(2), qllc(3), sdlc(4), channel(5)  

saTgLinkSpecific 1.3.6.1.4.1.223.8.3.3.3.2.1.9
A row in a table specific for the link. It is the object identifier representing the instance of the index variable in one of the snaLink tables from this MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

saTgLinkActiveTime 1.3.6.1.4.1.223.8.3.3.3.2.1.10
The value of sysUpTime when this TG link became active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

saTgLinkLastStateChange 1.3.6.1.4.1.223.8.3.3.3.2.1.11
The value of sysUptime when the last state change occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

saTgLinkSentBytes 1.3.6.1.4.1.223.8.3.3.3.2.1.12
The number of bytes sent on this TG link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

saTgLinkReceivedBytes 1.3.6.1.4.1.223.8.3.3.3.2.1.13
The number of bytes received on this TG link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

saTgLinkSentBtus 1.3.6.1.4.1.223.8.3.3.3.2.1.14
The number of Basic Transmission Units sent on this TG link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

saTgLinkReceivedBtus 1.3.6.1.4.1.223.8.3.3.3.2.1.15
The number of Basic Transmission Units received on this TG link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t2node 1.3.6.1.4.1.223.8.3.4.1
OBJECT IDENTIFIER    

snaLu 1.3.6.1.4.1.223.8.3.4.2
OBJECT IDENTIFIER    

applicationLu 1.3.6.1.4.1.223.8.3.4.3
OBJECT IDENTIFIER    

t2nodeTable 1.3.6.1.4.1.223.8.3.4.1.1
This table contains all configured and dynamic parameters of type 2 nodes have read-only access. There is also one control parameter, t2nodeAdminState which has read-write access. The link specific parameters are contained in a row of a separate table referenced by the snaLinkSpecific object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T2nodeEntry

t2nodeEntry 1.3.6.1.4.1.223.8.3.4.1.1.1
Entry contains all parameters of one type 2 node. They have read-only access. The entry is created by the Agent. The variable t2nodeAdminState has read-write access and is used to start or stop the node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T2nodeEntry  

t2nodeT5nodeIndex 1.3.6.1.4.1.223.8.3.4.1.1.1.1
Index in the t5nodeTable to which this t2node is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t2nodeIndex 1.3.6.1.4.1.223.8.3.4.1.1.1.2
Used to index the instances of objects assigned by the Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t2nodeName 1.3.6.1.4.1.223.8.3.4.1.1.1.3
The value identifies the name of the Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

t2nodeType 1.3.6.1.4.1.223.8.3.4.1.1.1.4
This value identifies the type of Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), pu20prim(2), pu20sec(3), t21LEN(4)  

t2nodeBlockNum 1.3.6.1.4.1.223.8.3.4.1.1.1.5
The value identifies the block number for this Node instance. It is the first 3 hexadecimal digits of the t2node id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3)  

t2nodeIdNum 1.3.6.1.4.1.223.8.3.4.1.1.1.6
The value identifies the ID number for this Node instance. This is the last 5 hexadecimal digits of the t2node id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(5)  

t2nodeMaxPiu 1.3.6.1.4.1.223.8.3.4.1.1.1.7
Maximum number of octets that can be exchanged by this PU in one Pathcontrol Information Unit (PIU).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t2nodeLinkType 1.3.6.1.4.1.223.8.3.4.1.1.1.8
The type of link protocol used for this PU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), link8022(2), qllc(3), sdlc(4), channelAttach(5), tcpip(6)  

t2nodeLinkSpecific 1.3.6.1.4.1.223.8.3.4.1.1.1.9
The row in a table specific for the link. It is the object identifier representing the instance of the index variable in one of the snaLink tables from this MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

t2nodeOperState 1.3.6.1.4.1.223.8.3.4.1.1.1.10
The operational state of the type 2 Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3), active(4), busy(5)  

t2nodeAdminState 1.3.6.1.4.1.223.8.3.4.1.1.1.11
The administrative state of the type 2 Node and is used by the Management Station to start or stop the Node. The values that can be read and written are: start (2) - this value has to be used to start, stop (3) - this value has to be used to stop. The values that can be read only are: other (1) - this value indicates that the variable has not been set after reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(2), stop(3)  

t2nodeStartTime 1.3.6.1.4.1.223.8.3.4.1.1.1.12
The value of sysUpTime at type 2 Node activation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

t2nodeLastStateChange 1.3.6.1.4.1.223.8.3.4.1.1.1.13
The value of sysUpTime at the last state change of the type 2 Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

t2nodeActFailureReason 1.3.6.1.4.1.223.8.3.4.1.1.1.14
The sense code for the activation failure. It will be sent in the trap t2NodeActFailTrap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t2nodeStatsTable 1.3.6.1.4.1.223.8.3.4.1.2
This table contains the dynamic parameters which have read-only access. The entries in this table augment the entries in the t2nodeTable and cannot be created by Management Station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    T2nodeStatsEntry

t2nodeStatsEntry 1.3.6.1.4.1.223.8.3.4.1.2.1
The entry contains parameters which describe the statistics of one t2node. They have read-only access. The counters represent traffic for all kinds of sessions: LU-LU, SSCP-PU, and SSCP-LU. The entry is created by the Agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  T2nodeStatsEntry  

t2nodeStatsT5nodeIndex 1.3.6.1.4.1.223.8.3.4.1.2.1.1
Index in the t5nodeTable to which this t2node is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t2nodeStatsIndex 1.3.6.1.4.1.223.8.3.4.1.2.1.2
The instance of the entry parameters. The index value is taken by the Agent from t2nodeIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

t2nodeStatsSentBytes 1.3.6.1.4.1.223.8.3.4.1.2.1.3
The number of bytes sent by this Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t2nodeStatsReceivedBytes 1.3.6.1.4.1.223.8.3.4.1.2.1.4
The number of bytes received by this Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t2nodeStatsSentPius 1.3.6.1.4.1.223.8.3.4.1.2.1.5
The number of PIUs sent by this Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t2nodeStatsReceivedPius 1.3.6.1.4.1.223.8.3.4.1.2.1.6
The number of PIUs received by this Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t2nodeStatsSentNegativeResps 1.3.6.1.4.1.223.8.3.4.1.2.1.7
The number of negative responses sent by this Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t2nodeStatsReceivedNegativeResps 1.3.6.1.4.1.223.8.3.4.1.2.1.8
The number of negative responses received by this Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

t2nodeStatsActiveLus 1.3.6.1.4.1.223.8.3.4.1.2.1.9
The number of LUs currently active on this PU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

t2nodeStatsActLus 1.3.6.1.4.1.223.8.3.4.1.2.1.10
The number of LUs on this type 2 Node which have active SSCP-LU sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

t2nodeStatsInActLus 1.3.6.1.4.1.223.8.3.4.1.2.1.11
The number of LUs on this type 2 Node which do not have active SSCP-LU sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

t2nodeStatsBindLus 1.3.6.1.4.1.223.8.3.4.1.2.1.12
The number of LUs on this type 2 Node which have received and acknowledged a BIND request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

snaLuTable 1.3.6.1.4.1.223.8.3.4.2.1
This table contains configuration and state information relating to LUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnaLuEntry

snaLuEntry 1.3.6.1.4.1.223.8.3.4.2.1.1
Contains configuration and state objects relating to an LU. All have read-only access with the exeption of snaLuAdminState which has read-write access and is used by the Management station to control the state of the LU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnaLuEntry  

snaLuT5nodeIndex 1.3.6.1.4.1.223.8.3.4.2.1.1.1
Index in the t5nodeTable to which this LU is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLuT2nodeIndex 1.3.6.1.4.1.223.8.3.4.2.1.1.2
Index in the t2nodeTable of the type 2 Node with which this LU is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLuIndex 1.3.6.1.4.1.223.8.3.4.2.1.1.3
This value identifies a unique index for an LU instance within a type 2 Node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLuName 1.3.6.1.4.1.223.8.3.4.2.1.1.4
The SNA name for this LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

snaLuType 1.3.6.1.4.1.223.8.3.4.2.1.1.5
Identifies whether the LU is Type 0, 1, 2, 3 or 6.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), lu0(2), lu1(3), lu2(4), lu3(5), lu62(6)  

snaLuLocalAddress 1.3.6.1.4.1.223.8.3.4.2.1.1.6
The local address for this LU. It is a byte with a value ranging in size from 0 to 255. For dependent LUs this value ranges from 1 to 255. For independent Lus this value is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

snaLuUserName 1.3.6.1.4.1.223.8.3.4.2.1.1.7
The name of the non-sna terminal or SNA LU that is using this LU. This value does not apply to all LUs and contains a zero length string if not known or does not apply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

snaLuPoolName 1.3.6.1.4.1.223.8.3.4.2.1.1.8
The name of the LU pool to which this LU belongs. An LU Pool is configured by the user. It contains a group of LUs any of which can be assigned to a user requesting an LU by the Pool name. May be a zero length string if this LU does not belong to a pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

snaLuOperState 1.3.6.1.4.1.223.8.3.4.2.1.1.9
The current operational state of this LU: For dependent LUs active(2) indicates the SSCP-LU session is active. For Independent LUs active(2) indicates that the LU is able to send or receive BINDs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

snaLuAdminState 1.3.6.1.4.1.223.8.3.4.2.1.1.10
This object is used by a management station to control the LU. Values up(2) and down(3) can be read or written, while a value other(1) is read-only and indicates that this variable has not been set since reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

snaLuLastStateChange 1.3.6.1.4.1.223.8.3.4.2.1.1.11
The value of sysUpTime when the last state change occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snaLuActiveTime 1.3.6.1.4.1.223.8.3.4.2.1.1.12
The value of sysUpTime when this LU becomes active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snaLuBindFailureReason 1.3.6.1.4.1.223.8.3.4.2.1.1.13
The sense code when there is a bind failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

applicationLuTable 1.3.6.1.4.1.223.8.3.4.3.1
Table of application LUs configuration and operational information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AppLuEntry

appLuEntry 1.3.6.1.4.1.223.8.3.4.3.1.1
Contains configuration and operational variables of an application LU. Variables are read-only with the exception of appLuAdminState which has read-write access and is used by the Management station to control the state of the Application LU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AppLuEntry  

appLuT5nodeIndex 1.3.6.1.4.1.223.8.3.4.3.1.1.1
Index in the t5nodeTable to which this application LU is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

appLuIndex 1.3.6.1.4.1.223.8.3.4.3.1.1.2
Unique index of an application LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

appLuName 1.3.6.1.4.1.223.8.3.4.3.1.1.3
Configured name for this application LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

appLuConversionType 1.3.6.1.4.1.223.8.3.4.3.1.1.4
Indicates the type of protocol conversion being performed on behalf of the application LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER interactive(1), transparent(2), native(3), netvOper(4)  

appLuHostInterfaceType 1.3.6.1.4.1.223.8.3.4.3.1.1.5
Identifies the type of application interface used by this application LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER interactive(1), outbound(2), appc(3), batch(4), rbfte(5)  

appLuApplicationName 1.3.6.1.4.1.223.8.3.4.3.1.1.6
The name of the host application which uses this application LU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

appLuGatewayName 1.3.6.1.4.1.223.8.3.4.3.1.1.7
The name of the application gateway. The gateway is used to group application LUs together for management purposes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

appLuAdminState 1.3.6.1.4.1.223.8.3.4.3.1.1.8
Used by the Management Station to control the Application LU. Values up (2) and down (3) can be read or written, while value other (1) is read-only and indicates that this variable has not been set since reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

appLuOperState 1.3.6.1.4.1.223.8.3.4.3.1.1.9
The current operational state of this application LU: whether it is inactive, active, or has one of more active sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), inactive(3), active(4), busy(5)  

appLuActiveTime 1.3.6.1.4.1.223.8.3.4.3.1.1.10
The value of sysUpTime when this application LU becomes active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

appLuLastStateChange 1.3.6.1.4.1.223.8.3.4.3.1.1.11
The value of sysUpTime when the last state change occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

appLuBindFailureReason 1.3.6.1.4.1.223.8.3.4.3.1.1.12
The sense code when there is a bind failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

appLuBatchDeviceTable 1.3.6.1.4.1.223.8.3.4.3.2
Table of configuration information for batch devices associated with a batch type application LU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AppLuBatchDeviceEntry

appLuBatchDeviceEntry 1.3.6.1.4.1.223.8.3.4.3.2.1
The entry contains configuration variables for batch devices associated with batch type application LUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AppLuBatchDeviceEntry  

appLuBatchDeviceT5nodeIndex 1.3.6.1.4.1.223.8.3.4.3.2.1.1
Index in the t5nodeTable to which this batch device is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

appLuBatchDeviceLuIndex 1.3.6.1.4.1.223.8.3.4.3.2.1.2
The index of an application LU to which this batch device is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

appLuBatchDeviceName 1.3.6.1.4.1.223.8.3.4.3.2.1.3
The configured name for this batch device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

appLuBatchDeviceType 1.3.6.1.4.1.223.8.3.4.3.2.1.4
Indicates the type of batch device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER console(1), cardreader(2), cardpunch(3), printer(4)  

appLuBatchDeviceNumber 1.3.6.1.4.1.223.8.3.4.3.2.1.5
A device number used to identify multiple devices of the same type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

snaSessionTable 1.3.6.1.4.1.223.8.3.5.1
Table containing dynamic statistics information relating to SNA sessions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnaSessionEntry

snaSessionEntry 1.3.6.1.4.1.223.8.3.5.1.1
Contains information about an SNA session. Objects in this table have read-only access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnaSessionEntry  

snaSessT5nodeIndex 1.3.6.1.4.1.223.8.3.5.1.1.1
Identifies the Type 5 node which is associated with this SNA session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaSessNauName 1.3.6.1.4.1.223.8.3.5.1.1.2
The name of the SNA network addressable unit (NAU).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

snaSessNauSessNumber 1.3.6.1.4.1.223.8.3.5.1.1.3
A number identifying the session number within the NAU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaSessType 1.3.6.1.4.1.223.8.3.5.1.1.4
Identifies the type of SNA session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sscp-sscp(1), lu-lu(2)  

snaSessNauElementAddress 1.3.6.1.4.1.223.8.3.5.1.1.5
The element address assigned to the SNA NAU by the Type 5 node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaSessState 1.3.6.1.4.1.223.8.3.5.1.1.6
The state of the session. Valid values for all session types are: initiating (1), terminating (2), and active (4). The value queued (3) is valid only for snaSessType value of lu-lu (2). Some variables are unknown when the session state is initiating (1) or queued (2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initiating(1), terminating(2), queued(3), active(4)  

snaSessActiveTime 1.3.6.1.4.1.223.8.3.5.1.1.7
The value of sysUpTime when session becomes active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snaSessSentBytes 1.3.6.1.4.1.223.8.3.5.1.1.8
The number of bytes sent on this SNA session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snaSessReceivedBytes 1.3.6.1.4.1.223.8.3.5.1.1.9
The number of bytes received on this session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snaSessSentRus 1.3.6.1.4.1.223.8.3.5.1.1.10
The number of RUs sent on this session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snaSessReceivedRus 1.3.6.1.4.1.223.8.3.5.1.1.11
The number of RUs received on this session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snaSessSentNegativeResps 1.3.6.1.4.1.223.8.3.5.1.1.12
The number of negative responses sent on this session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snaSessReceivedNegativeResps 1.3.6.1.4.1.223.8.3.5.1.1.13
The number of negative responses received on this session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snaSessPartnerNauName 1.3.6.1.4.1.223.8.3.5.1.1.14
The name of the session partner NAU. May be a zero length string if not known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

snaSessPartnerNauSubarea 1.3.6.1.4.1.223.8.3.5.1.1.15
The subarea number of the session partner NAU. Will be zero if not known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

snaSessPartnerNauElementAddress 1.3.6.1.4.1.223.8.3.5.1.1.16
The element address of the session partner NAU. Will be zero if not known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

snaSessVirtualRouteNumber 1.3.6.1.4.1.223.8.3.5.1.1.17
A value indicating the virtual route number for this session. Will be zero if not known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

snaSessTransmissionPriority 1.3.6.1.4.1.223.8.3.5.1.1.18
A transmission priority for this session. Will be zero if not known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

snaSessProcCorrelationId 1.3.6.1.4.1.223.8.3.5.1.1.19
This variable uniquely identifies this lu-lu session. Will contain a zero length string if snaSessType value is not lu-lu (2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

snaSessPluIndicator 1.3.6.1.4.1.223.8.3.5.1.1.20
It indicates whether LU is primary or secondary for this session. Will be other (1) if snaSessType value is not lu-lu (2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), plu(2), slu(3)  

snaSessModeName 1.3.6.1.4.1.223.8.3.5.1.1.21
The name of the mode used for this session. Contains a zero length string if snaSessType value is not lu-lu (2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

snaLink802Dot2Table 1.3.6.1.4.1.223.8.3.6.1
This table contains Managed Objects which describe basic configuration parameters for PUs or TGs using 802.2 links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnaLink802Dot2Entry

snaLink802Dot2Entry 1.3.6.1.4.1.223.8.3.6.1.1
Entry contains all link configuration parameters for one PU or TG. The objects in the entry have read-only access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnaLink802Dot2Entry  

snaLink802Dot2T5nodeIndex 1.3.6.1.4.1.223.8.3.6.1.1.1
The index of the Type 5 node associated with this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaLink802Dot2Index 1.3.6.1.4.1.223.8.3.6.1.1.2
The index variable assigned by Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaLink802Dot2SourceAddress 1.3.6.1.4.1.223.8.3.6.1.1.3
Medium Access Control (MAC) address of the source node of this logical link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..12)  

snaLink802Dot2SourceSAP 1.3.6.1.4.1.223.8.3.6.1.1.4
The source node's Service Access Point (SSAP).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLink802Dot2DestinationAddress 1.3.6.1.4.1.223.8.3.6.1.1.5
Medium Access Control (MAC) address of the destination node of this logical link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..12)  

snaLink802Dot2DestinationSAP 1.3.6.1.4.1.223.8.3.6.1.1.6
The Service Access Point used by the remote node (DSAP).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLink802Dot2MediaType 1.3.6.1.4.1.223.8.3.6.1.1.7
The underlying physical media type: token-ring or ethernet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..10)  

snaLink802Dot2Role 1.3.6.1.4.1.223.8.3.6.1.1.8
The role of the PU used for the 802.2 link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER secondary(1), primary(2), negotiable(3)  

snaLink802Dot2LineName 1.3.6.1.4.1.223.8.3.6.1.1.9
The configured name of the associated line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

snaLink802Dot2Port 1.3.6.1.4.1.223.8.3.6.1.1.10
The physical port location in the system. The first octet contains the port processor id (0 to 255) and the second octet contains the line number (0-8) for line modules which support multiple lines.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

snaLink802Dot2IfIndex 1.3.6.1.4.1.223.8.3.6.1.1.11
The IfIndex value of the interface used by this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkSdlcTable 1.3.6.1.4.1.223.8.3.6.2
This table contains Managed Objects which describe basic configuration parameters for PUs using SDLC link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnaLinkSdlcEntry

snaLinkSdlcEntry 1.3.6.1.4.1.223.8.3.6.2.1
Entry contains all link configuration parameters for one PU. The objects in the entry have read-only access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnaLinkSdlcEntry  

snaLinkSdlcT5nodeIndex 1.3.6.1.4.1.223.8.3.6.2.1.1
The index of the Type 5 node associated with this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaLinkSdlcIndex 1.3.6.1.4.1.223.8.3.6.2.1.2
The index variable assigned by Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkSdlcDestinationStationAddr 1.3.6.1.4.1.223.8.3.6.2.1.3
Station Address (1 byte) of the destination node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1)  

snaLinkSdlcStationRole 1.3.6.1.4.1.223.8.3.6.2.1.4
The role of the local station in relation to a remote one.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER secondary(1), primary(2), negotiable(3)  

snaLinkSdlcLineName 1.3.6.1.4.1.223.8.3.6.2.1.5
The configured name of the associated line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

snaLinkSdlcPort 1.3.6.1.4.1.223.8.3.6.2.1.6
The physical port location in the system. The first octet contains the port processor id (0 to 255) and the second octet contains the line number (0-8) for line modules which support multiple lines.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

snaLinkSdlcIfIndex 1.3.6.1.4.1.223.8.3.6.2.1.7
The IfIndex value of the interface used by this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkQllcTable 1.3.6.1.4.1.223.8.3.6.3
This table contains Managed Objects which describe basic configuration parameters for PUs using QLLC links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnaLinkQllcEntry

snaLinkQllcEntry 1.3.6.1.4.1.223.8.3.6.3.1
Entry contains all link configuration parameters for one PU. The objects in the entry have read-only access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnaLinkQllcEntry  

snaLinkQllcT5nodeIndex 1.3.6.1.4.1.223.8.3.6.3.1.1
The index of the Type 5 node associated with this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaLinkQllcIndex 1.3.6.1.4.1.223.8.3.6.3.1.2
The index variable assigned by Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaLinkQllcLcn 1.3.6.1.4.1.223.8.3.6.3.1.3
The Logical Channel Number (LCN) used by the source node in the case of SVC. Identifies the Circuit number in the case of PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkQllcSourceDteAddr 1.3.6.1.4.1.223.8.3.6.3.1.4
The DTE Address (15 bytes) of the source node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

snaLinkQllcDestinationDteAddr 1.3.6.1.4.1.223.8.3.6.3.1.5
The DTE Address (15 bytes) of the destination node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

snaLinkQllcRole 1.3.6.1.4.1.223.8.3.6.3.1.6
The role of the QLLC PU in relation to a remote one.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER secondary(1), primary(2), negotiable(3)  

snaLinkQllcPdnGroupName 1.3.6.1.4.1.223.8.3.6.3.1.7
Name of the associated PDNGROUP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

snaLinkQllcLineName 1.3.6.1.4.1.223.8.3.6.3.1.8
The configured name of the associated line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

snaLinkQllcPort 1.3.6.1.4.1.223.8.3.6.3.1.9
The physical port location in the system. The first octet contains the port processor id (0 to 255) and the second octet contains the line number (0-8) for line modules which support multiple lines.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

snaLinkQllcIfIndex 1.3.6.1.4.1.223.8.3.6.3.1.10
The IfIndex value of the interface used by this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkChannelTable 1.3.6.1.4.1.223.8.3.6.4
This table contains Managed Objects which describe basic configuration parameters for PUs using Channel link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnaLinkChannelEntry

snaLinkChannelEntry 1.3.6.1.4.1.223.8.3.6.4.1
Entry contains all link configuration parameters for one PU. The objects in the entry have read-only access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnaLinkChannelEntry  

snaLinkChannelT5nodeIndex 1.3.6.1.4.1.223.8.3.6.4.1.1
The index of the Type 5 node associated with this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaLinkChannelIndex 1.3.6.1.4.1.223.8.3.6.4.1.2
The index variable assigned by Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkChannelLineName 1.3.6.1.4.1.223.8.3.6.4.1.3
The configured name of the associated line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

snaLinkChannelPort 1.3.6.1.4.1.223.8.3.6.4.1.4
The physical port location in the system. The first octet contains the port processor id (0 to 255) and the second octet contains the line number (0-8) for line modules which support multiple lines.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

snaLinkChannelIfIndex 1.3.6.1.4.1.223.8.3.6.4.1.5
The IfIndex value of the interface used by this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkIntTable 1.3.6.1.4.1.223.8.3.6.5
This table contains Managed Objects which describe basic configuration parameters Internal links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnaLinkIntEntry

snaLinkIntEntry 1.3.6.1.4.1.223.8.3.6.5.1
Entry contains all link configuration parameters for one PU. The objects in the entry have read-only access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnaLinkIntEntry  

snaLinkIntT5nodeIndex 1.3.6.1.4.1.223.8.3.6.5.1.1
The index of the Type 5 node associated with this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snaLinkIntIndex 1.3.6.1.4.1.223.8.3.6.5.1.2
The index variable assigned by Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snaLinkIntServiceType 1.3.6.1.4.1.223.8.3.6.5.1.3
The type of the internal link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tglink(1), uniscope(2), ds3270(3)  

snaLinkIntOutputCredit 1.3.6.1.4.1.223.8.3.6.5.1.4
This value is used to control the flow of data on the internal link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

snaLinkIntOutputPacing 1.3.6.1.4.1.223.8.3.6.5.1.5
This value is used to control the flow of data on the internal link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15