SLE-VOIP-MIB

File: SLE-VOIP-MIB.mib (91990 bytes)

Imported modules

DASAN-SMI SLE-TC-MIB SNMPv2-CONF
SNMPv2-SMI

Imported symbols

sleMgmt SleControlStatusType SleControlRequestResultType
OBJECT-GROUP NOTIFICATION-GROUP TimeTicks
IpAddress Integer32 Unsigned32
Gauge32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE

Defined Types

OwnerString  
OCTET STRING Size(0..255)    

EnableDisableState  
INTEGER disable(0), enable(1)    

SleVoipVoiceEntry  
SEQUENCE    
  sleVoipVoiceIndex Integer32
  sleVoipVoiceEncoding INTEGER
  sleVoipVoiceUserEncoding INTEGER
  sleVoipVoiceComfortNoise INTEGER
  sleVoipVoiceEchoCancel INTEGER
  sleVoipVoicePacketLoss INTEGER
  sleVoipVoiceVad INTEGER
  sleVoipVoiceDSCP Unsigned32
  sleVoipVoiceJitter Unsigned32

SleVoipSipUserEntry  
SEQUENCE    
  sleVoipSipUserIndex Unsigned32
  sleVoipSipUserAgent INTEGER
  sleVoipSipUserAOR OCTET STRING
  sleVoipSipUserDisplayName OCTET STRING
  sleVoipSipUserUserName OCTET STRING
  sleVoipSipUserPassword OCTET STRING

SleVoipSipAgentEntry  
SEQUENCE    
  sleVoipSipAgentIndex Integer32
  sleVoipSipAgentServer OCTET STRING
  sleVoipSipAgentPort Integer32
  sleVoipSipAgentTypeOfService Integer32
  sleVoipSipAgentTransport INTEGER
  sleVoipSipAgentRegistrar OCTET STRING
  sleVoipSipAgentPrimary OCTET STRING
  sleVoipSipAgentSecondary OCTET STRING
  sleVoipSipAgentProfileName OCTET STRING
  sleVoipSipAgentExpireTimer Integer32

SleVoipMgcpEndpointEntry  
SEQUENCE    
  sleVoipMgcpEndpointIndex Unsigned32
  sleVoipMgcpEndpointAgent Integer32
  sleVoipMgcpEndpointName OCTET STRING

SleVoipMgcpAgentEntry  
SEQUENCE    
  sleVoipMgcpAgentIndex Integer32
  sleVoipMgcpCallAgent IpAddress
  sleVoipMgcpCallAgentPort Integer32
  sleVoipMgcpAgentPort Integer32
  sleVoipMgcpAgentTOS Integer32
  sleVoipMgcpAgentVendor INTEGER
  sleVoipMgcpAgentDNS OCTET STRING
  sleVoipMgcpAgentProfileName OCTET STRING

SleVoipPotsStatusEntry  
SEQUENCE    
  sleVoipPotsStatusIndex Unsigned32
  sleVoipPotsStatus INTEGER
  sleVoipPotsStatusHookState INTEGER
  sleVoipPotsStatusRegisterState INTEGER

SleVoipMediaProfileEntry  
SEQUENCE    
  sleVoipMediaProfileIndex Integer32
  sleVoipMediaProfileCodecSelection INTEGER
  sleVoipMediaProfilePacketPeriod INTEGER
  sleVoipMediaProfileSilenceSuppression INTEGER

SleVoipTimerEntry  
SEQUENCE    
  sleVoipTimerIndex Integer32
  sleVoipTimerCriticalTimeout Integer32
  sleVoipTimerFirstDigit Integer32
  sleVoipTimerIntraDigit Integer32

SleVoipDialPlanEntry  
SEQUENCE    
  sleVoipDialPlanPotStatusIndex Integer32
  sleVoipDialPlanIndex Integer32
  sleVoipDialPlanDigitMap OCTET STRING

SleVoipStatisticsEntry  
SEQUENCE    
  sleVoipStatisticsIndex Integer32
  sleVoipStatisticsFormat Unsigned32
  sleVoipStatisticsCallTimer Unsigned32
  sleVoipStatisticsCurrentPlayoutDelay Unsigned32
  sleVoipStatisticsMinPlayoutDelay Unsigned32
  sleVoipStatisticsMaxPlayoutDelay Unsigned32
  sleVoipStatisticsClockOffset Unsigned32
  sleVoipStatisticsPeakJitter Unsigned32
  sleVoipStatisticsInterpolativeConcealment Unsigned32
  sleVoipStatisticsSilenceConcealment Unsigned32
  sleVoipStatisticsOverflowDiscard Unsigned32
  sleVoipStatisticsEndpointDetectionErrors Unsigned32
  sleVoipStatisticsTxVoicePackets Unsigned32
  sleVoipStatisticsTxSignalingPackets Unsigned32
  sleVoipStatisticsTxComfortNoisePackets Unsigned32
  sleVoipStatisticsTotalTransmitDuration Unsigned32
  sleVoipStatisticsVoiceTransmitDuration Unsigned32
  sleVoipStatisticsRxVoicePackets Unsigned32
  sleVoipStatisticsRxSignalingPackets Unsigned32
  sleVoipStatisticsRxComfortNoisePackets Unsigned32
  sleVoipStatisticsTotalReceiveDuration Unsigned32
  sleVoipStatisticsVoiceReceiveDuration Unsigned32
  sleVoipStatisticsPacketsOutSequence Unsigned32
  sleVoipStatisticsBadProtocolHeaders Unsigned32
  sleVoipStatisticsLatePackets Unsigned32
  sleVoipStatisticsEarlyPackets Unsigned32
  sleVoipStatisticsRxVoiceOctets Unsigned32
  sleVoipStatisticsLostPackets Unsigned32
  sleVoipStatisticsCurrentTransmitPower Unsigned32
  sleVoipStatisticsMeanTransmitPower Unsigned32
  sleVoipStatisticsCurrentReceivePower Unsigned32
  sleVoipStatisticsMeanReceivePower Unsigned32
  sleVoipStatisticsBackgroundNoise Unsigned32
  sleVoipStatisticsErlLevel Unsigned32
  sleVoipStatisticsAcomLevel Unsigned32
  sleVoipStatisticsCurrentTransmitActivity Unsigned32
  sleVoipStatisticsCurrentReceiveActivity Unsigned32

Defined Values

sleVoip 1.3.6.1.4.1.6296.101.25
This MIB contains all needed informations about rmon and all supported sle rmon features.
MODULE-IDENTITY    

sleVoipBase 1.3.6.1.4.1.6296.101.25.1
OBJECT IDENTIFIER    

sleVoipBaseInfo 1.3.6.1.4.1.6296.101.25.1.1
OBJECT IDENTIFIER    

sleVoipInterface 1.3.6.1.4.1.6296.101.25.1.1.1
Display host interface name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipProtocol 1.3.6.1.4.1.6296.101.25.1.1.2
Display protocol (none|sip|mgcp) is set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), sip(1), mgcp(3)  

sleVoipRtcp 1.3.6.1.4.1.6296.101.25.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER voipRtcpDisable(0), voipRtcpEnable(1)  

sleVoipFaxmode 1.3.6.1.4.1.6296.101.25.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER voipFaxmodeT30(0), voipFaxmodeT38(1)  

sleVoipBaseControl 1.3.6.1.4.1.6296.101.25.1.2
OBJECT IDENTIFIER    

sleVoipBaseControlRequest 1.3.6.1.4.1.6296.101.25.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setVoipInterface(1), setVoipProtocol(2), voipRestartStackOnly(3), voipRestartAll(4), setVoipRtcp(5), setVoipFaxmode(6)  

sleVoipBaseControlStatus 1.3.6.1.4.1.6296.101.25.1.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipBaseControlTimer 1.3.6.1.4.1.6296.101.25.1.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipBaseControlTimeStamp 1.3.6.1.4.1.6296.101.25.1.2.4
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipBaseControlReqResult 1.3.6.1.4.1.6296.101.25.1.2.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipBaseControlInterface 1.3.6.1.4.1.6296.101.25.1.2.6
Host interface name. Explain each group,up to 32 characters string include Null character.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipBaseControlProtocol 1.3.6.1.4.1.6296.101.25.1.2.7
Protocol(none|sip|mgcp).(Optional) to explain each group,up to 32 characters string include Null character.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), sip(1), mgcp(3)  

sleVoipBaseControlRtcp 1.3.6.1.4.1.6296.101.25.1.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER voipRtcpDisable(0), voipRtcpEnable(1)  

sleVoipBaseControlFaxmode 1.3.6.1.4.1.6296.101.25.1.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER voipFaxmodeT30(0), voipFaxmodeT38(1)  

sleVoipBaseNotification 1.3.6.1.4.1.6296.101.25.1.3
OBJECT IDENTIFIER    

sleVoipBaseInterfaceChanged 1.3.6.1.4.1.6296.101.25.1.3.1
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipBaseProtocolChanged 1.3.6.1.4.1.6296.101.25.1.3.2
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipBaseRestartStackOnly 1.3.6.1.4.1.6296.101.25.1.3.3
voipRestartStackOnly
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipBaseRestartAll 1.3.6.1.4.1.6296.101.25.1.3.4
voipRestartAll
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipBaseRtcpChanged 1.3.6.1.4.1.6296.101.25.1.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipBaseFaxmodeChanged 1.3.6.1.4.1.6296.101.25.1.3.6
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipVoice 1.3.6.1.4.1.6296.101.25.2
OBJECT IDENTIFIER    

sleVoipVoiceTable 1.3.6.1.4.1.6296.101.25.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipVoiceEntry

sleVoipVoiceEntry 1.3.6.1.4.1.6296.101.25.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipVoiceEntry  

sleVoipVoiceIndex 1.3.6.1.4.1.6296.101.25.2.1.1.1
DESCRIPTION: The index of the voice. <1-8>
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipVoiceEncoding 1.3.6.1.4.1.6296.101.25.2.1.1.2
Line coding (0:a-law,1:mu-law).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER a(0), m(1)  

sleVoipVoiceUserEncoding 1.3.6.1.4.1.6296.101.25.2.1.1.3
a-law telephony companding algorithm,mu-law telephony companding algorithm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER a(0), m(1)  

sleVoipVoiceComfortNoise 1.3.6.1.4.1.6296.101.25.2.1.1.4
Comfort Noise (0: on;1: off)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

sleVoipVoiceEchoCancel 1.3.6.1.4.1.6296.101.25.2.1.1.5
Echo cancellation,(on|off).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipVoicePacketLoss 1.3.6.1.4.1.6296.101.25.2.1.1.6
Packet Loss Concealment,(on|off). Index: Channel Index,Range is from 0 to 7. Packetloss: Packet Loss Concealment, (1:on,0:off).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipVoiceVad 1.3.6.1.4.1.6296.101.25.2.1.1.7
Voice Activity Detection (on(0)|off(1)).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipVoiceDSCP 1.3.6.1.4.1.6296.101.25.2.1.1.8
DSCP number, Range is from 0 to 63.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..63  

sleVoipVoiceJitter 1.3.6.1.4.1.6296.101.25.2.1.1.9
Jitter Buffer parameter (0-500ms).Default value is 500ms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500  

sleVoipVoiceControl 1.3.6.1.4.1.6296.101.25.2.2
OBJECT IDENTIFIER    

sleVoipVoiceControlRequest 1.3.6.1.4.1.6296.101.25.2.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableVoiceVoip(1), disableVoiceVoip(2)  

sleVoipVoiceControlStatus 1.3.6.1.4.1.6296.101.25.2.2.2
The status of user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipVoiceControlTimer 1.3.6.1.4.1.6296.101.25.2.2.3
The maximum time for the manager for a long running user command. Apply your setting.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipVoiceControlTimeStamp 1.3.6.1.4.1.6296.101.25.2.2.4
The time stamp of the last command(end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipVoiceControlReqResult 1.3.6.1.4.1.6296.101.25.2.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipVoiceControlIndex 1.3.6.1.4.1.6296.101.25.2.2.6
The index of the voice. <1-8>
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sleVoipVoiceControlEncoding 1.3.6.1.4.1.6296.101.25.2.2.7
Line coding (0:a-law,1:mu-law).(Optional) to explain each group,up to 32 characters string include Null character.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER alaw(0), mulaw(1)  

sleVoipVoiceControlUserEncoding 1.3.6.1.4.1.6296.101.25.2.2.8
Description. (Optional) to explain each group,up to 32 characters string include NULL character. a-law telephony companding algorithm,mu-law telephony companding algorithm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER alaw(0), mulaw(1)  

sleVoipVoiceControlComfortNoise 1.3.6.1.4.1.6296.101.25.2.2.9
(Optional) to explain each group,up to 32 characters string include NULL character.( on:turn on this function, off:turn off this function)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(0), off(1)  

sleVoipVoiceControlEchoCancel 1.3.6.1.4.1.6296.101.25.2.2.10
(Optional) to explain each group,up to 32 characters string include NULL character. Echo cancellation,(on|off).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipVoiceControlPacketLoss 1.3.6.1.4.1.6296.101.25.2.2.11
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Packet Loss Concealment,(on|off). Index: Channel Index,Range is from 0 to 7. Packetloss: Packet Loss Concealment, (1:on,0:off).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipVoiceControlVad 1.3.6.1.4.1.6296.101.25.2.2.12
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Voice Activity Detection (on(1)|off(0)).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipVoiceControlDSCP 1.3.6.1.4.1.6296.101.25.2.2.13
Description. DSCP number, Range is from 0 to 63.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

sleVoipVoiceControlJitter 1.3.6.1.4.1.6296.101.25.2.2.14
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Jitter Buffer parameter (0-500ms).Default value is 500ms.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..500  

sleVoiceNotification 1.3.6.1.4.1.6296.101.25.2.3
OBJECT IDENTIFIER    

sleVoipVoiceEnabled 1.3.6.1.4.1.6296.101.25.2.3.1
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipVoiceDisabled 1.3.6.1.4.1.6296.101.25.2.3.2
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipSipUser 1.3.6.1.4.1.6296.101.25.3
OBJECT IDENTIFIER    

sleVoipSipUserTable 1.3.6.1.4.1.6296.101.25.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipSipUserEntry

sleVoipSipUserEntry 1.3.6.1.4.1.6296.101.25.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipSipUserEntry  

sleVoipSipUserIndex 1.3.6.1.4.1.6296.101.25.3.1.1.1
The index of Sip user.(1..8)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

sleVoipSipUserAgent 1.3.6.1.4.1.6296.101.25.3.1.1.2
Display the reference to sip which agent.Range is from 1 to 8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

sleVoipSipUserAOR 1.3.6.1.4.1.6296.101.25.3.1.1.3
Display address of record.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserDisplayName 1.3.6.1.4.1.6296.101.25.3.1.1.4
The username for sip account.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserUserName 1.3.6.1.4.1.6296.101.25.3.1.1.5
Display user name for sip account.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserPassword 1.3.6.1.4.1.6296.101.25.3.1.1.6
The password for sip account.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserControl 1.3.6.1.4.1.6296.101.25.3.2
OBJECT IDENTIFIER    

sleVoipSipUserControlRequest 1.3.6.1.4.1.6296.101.25.3.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableVoipSipUser(1), disableVoipSipUser(2)  

sleVoipSipUserControlStatus 1.3.6.1.4.1.6296.101.25.3.2.2
The status of user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipSipUserControlTimer 1.3.6.1.4.1.6296.101.25.3.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipSipUserControlTimeStamp 1.3.6.1.4.1.6296.101.25.3.2.4
Time stamp attribute set at the end of command
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipSipUserControlReqResult 1.3.6.1.4.1.6296.101.25.3.2.5
Result of last command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipSipUserControlIndex 1.3.6.1.4.1.6296.101.25.3.2.6
Description. Setting Sip user index <1-8>
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8  

sleVoipSipUserControlAgent 1.3.6.1.4.1.6296.101.25.3.2.7
Setting the reference to sip which agent.Range is from 1 to 8. (Optional) to explain each group,up to 32 characters string include NULL character.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

sleVoipSipUserControlAOR 1.3.6.1.4.1.6296.101.25.3.2.8
Setting address of record.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserControlDisplayName 1.3.6.1.4.1.6296.101.25.3.2.9
Setting display-name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserControlUserName 1.3.6.1.4.1.6296.101.25.3.2.10
Setting user name for sip account.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserControlPassword 1.3.6.1.4.1.6296.101.25.3.2.11
Setting password for sip account.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipUserNotification 1.3.6.1.4.1.6296.101.25.3.3
OBJECT IDENTIFIER    

sleVoipSipUserEnabled 1.3.6.1.4.1.6296.101.25.3.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipSipUserDisabled 1.3.6.1.4.1.6296.101.25.3.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipSipAgent 1.3.6.1.4.1.6296.101.25.4
OBJECT IDENTIFIER    

sleVoipSipAgentTable 1.3.6.1.4.1.6296.101.25.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipSipAgentEntry

sleVoipSipAgentEntry 1.3.6.1.4.1.6296.101.25.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipSipAgentEntry  

sleVoipSipAgentIndex 1.3.6.1.4.1.6296.101.25.4.1.1.1
The index of Sip agent. Range from 1 to 8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipSipAgentServer 1.3.6.1.4.1.6296.101.25.4.1.1.2
Set Server for SIP service.IP destination prefix or Domain name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentPort 1.3.6.1.4.1.6296.101.25.4.1.1.3
Port number (0-65535).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleVoipSipAgentTypeOfService 1.3.6.1.4.1.6296.101.25.4.1.1.4
Type of service, value is <0-63>.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleVoipSipAgentTransport 1.3.6.1.4.1.6296.101.25.4.1.1.5
Transport protocol (TCP(6)|UDP(17))
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcp(6), udp(17)  

sleVoipSipAgentRegistrar 1.3.6.1.4.1.6296.101.25.4.1.1.6
Register Domain name. or DNS.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentPrimary 1.3.6.1.4.1.6296.101.25.4.1.1.7
Set IPv4 destination prefix. or primary domain name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentSecondary 1.3.6.1.4.1.6296.101.25.4.1.1.8
Set IPv4 destination prefix. or secondary domain name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentProfileName 1.3.6.1.4.1.6296.101.25.4.1.1.9
Profile name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentExpireTimer 1.3.6.1.4.1.6296.101.25.4.1.1.10
Register expire timer. Range from 300 to 360s.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 300..360  

sleVoipSipAgentControl 1.3.6.1.4.1.6296.101.25.4.2
OBJECT IDENTIFIER    

sleVoipSipAgentControlRequest 1.3.6.1.4.1.6296.101.25.4.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableSipAgent(1), disableSipAgent(2)  

sleVoipSipAgentControlStatus 1.3.6.1.4.1.6296.101.25.4.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipSipAgentControlTimer 1.3.6.1.4.1.6296.101.25.4.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipSipAgentControlTimeStamp 1.3.6.1.4.1.6296.101.25.4.2.4
Time stamp attribute set at the end of command
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipSipAgentControlReqResult 1.3.6.1.4.1.6296.101.25.4.2.5
Result of last command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipSipAgentControlIndex 1.3.6.1.4.1.6296.101.25.4.2.6
The index of SIP agent.Range from 1 to 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sleVoipSipAgentControlServer 1.3.6.1.4.1.6296.101.25.4.2.7
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Set IPv4 address destination prefix or Domain name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentControlPort 1.3.6.1.4.1.6296.101.25.4.2.8
Description. (Optional) to explain each group,up to 32 characters string include NULL character.Port number (0-65535).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleVoipSipAgentControlTypeOfService 1.3.6.1.4.1.6296.101.25.4.2.9
Description. Type of service, value is Range from 0 to 63..
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

sleVoipSipAgentControlTransport 1.3.6.1.4.1.6296.101.25.4.2.10
Description. Transport protocol (TCP|UDP).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(6), udp(17)  

sleVoipSipAgentControlRegistrar 1.3.6.1.4.1.6296.101.25.4.2.11
Description. Register Domain name. or DNS..(Optional) to explain each group,up to 32 characters string include NULL character.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentControlPrimary 1.3.6.1.4.1.6296.101.25.4.2.12
(Optional) to explain each group,up to 32 characters string include NULL character. Set IPv4 address destination prefix or primary Domain name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentControlSecondary 1.3.6.1.4.1.6296.101.25.4.2.13
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Set IPv4 address destination prefix or secondary Domain name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentControlProfileName 1.3.6.1.4.1.6296.101.25.4.2.14
Profile name setting
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipSipAgentControlExpireTimer 1.3.6.1.4.1.6296.101.25.4.2.15
Register expire timer setting. Range from 300 to 360ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 300..360  

sleVoipSipAgentNotification 1.3.6.1.4.1.6296.101.25.4.3
OBJECT IDENTIFIER    

sleVoipSipAgentEnabled 1.3.6.1.4.1.6296.101.25.4.3.1
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipSipAgentDisabled 1.3.6.1.4.1.6296.101.25.4.3.2
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipMgcpEndpoint 1.3.6.1.4.1.6296.101.25.5
OBJECT IDENTIFIER    

sleVoipMgcpEndpointTable 1.3.6.1.4.1.6296.101.25.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipMgcpEndpointEntry

sleVoipMgcpEndpointEntry 1.3.6.1.4.1.6296.101.25.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipMgcpEndpointEntry  

sleVoipMgcpEndpointIndex 1.3.6.1.4.1.6296.101.25.5.1.1.1
The index of mgcp endpoint Range from 1 to 8.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

sleVoipMgcpEndpointAgent 1.3.6.1.4.1.6296.101.25.5.1.1.2
Setting the reference to sip which agent,default is 1 Range from 1 to 8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipMgcpEndpointName 1.3.6.1.4.1.6296.101.25.5.1.1.3
Setting endpoint name for mgcp.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipMgcpEndpointControl 1.3.6.1.4.1.6296.101.25.5.2
OBJECT IDENTIFIER    

sleVoipMgcpEndpointControlRequest 1.3.6.1.4.1.6296.101.25.5.2.1
The cpu-pkt-filter request.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableMgcpEndpoint(1), disableMgcpEndpoint(2)  

sleVoipMgcpEndpointControlStatus 1.3.6.1.4.1.6296.101.25.5.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipMgcpEndpointControlTimer 1.3.6.1.4.1.6296.101.25.5.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipMgcpEndpointControlTimeStamp 1.3.6.1.4.1.6296.101.25.5.2.4
Time stamp attribute set at the end of command
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipMgcpEndpointControlReqResult 1.3.6.1.4.1.6296.101.25.5.2.5
Result of last command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipMgcpEndpointControlIndex 1.3.6.1.4.1.6296.101.25.5.2.6
The index of mgcp endpoint Range from 1 to 8.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8  

sleVoipMgcpEndpointControlAgent 1.3.6.1.4.1.6296.101.25.5.2.7
Setting the reference to sip which agent,default is 1 Range from 1 to 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sleVoipMgcpEndpointControlName 1.3.6.1.4.1.6296.101.25.5.2.8
(Optional) to explain each group,up to 32 characters string include NULL character. Setting endpoint name for mgcp.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipMgcpEndpointNotification 1.3.6.1.4.1.6296.101.25.5.3
OBJECT IDENTIFIER    

sleVoipMgcpEndpointEnabled 1.3.6.1.4.1.6296.101.25.5.3.1
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipMgcpEndpointDisabled 1.3.6.1.4.1.6296.101.25.5.3.2
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipMgcpAgent 1.3.6.1.4.1.6296.101.25.6
OBJECT IDENTIFIER    

sleVoipMgcpAgentTable 1.3.6.1.4.1.6296.101.25.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipMgcpAgentEntry

sleVoipMgcpAgentEntry 1.3.6.1.4.1.6296.101.25.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipMgcpAgentEntry  

sleVoipMgcpAgentIndex 1.3.6.1.4.1.6296.101.25.6.1.1.1
DESCRIPTION: Display mgcp agent index .Range from 1 to 8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipMgcpCallAgent 1.3.6.1.4.1.6296.101.25.6.1.1.2
IP address of destination prefix
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleVoipMgcpCallAgentPort 1.3.6.1.4.1.6296.101.25.6.1.1.3
Description. Agent-Port number, value is from 1-65535.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleVoipMgcpAgentPort 1.3.6.1.4.1.6296.101.25.6.1.1.4
Local-Port number, value is from 1-65535.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleVoipMgcpAgentTOS 1.3.6.1.4.1.6296.101.25.6.1.1.5
Type of service .value is from 0-63.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleVoipMgcpAgentVendor 1.3.6.1.4.1.6296.101.25.6.1.1.6
Type of vendor (DSSW:DasanSwitch,MSSW:MetaSwitch,G6SW:G6Switch,CSSW:C15Switch)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), dssw(1), mssw(2), g6sw(3), cssw(4)  

sleVoipMgcpAgentDNS 1.3.6.1.4.1.6296.101.25.6.1.1.7
Set Domain name to MGCP agent.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipMgcpAgentProfileName 1.3.6.1.4.1.6296.101.25.6.1.1.8
The profile name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipMgcpAgentControl 1.3.6.1.4.1.6296.101.25.6.2
OBJECT IDENTIFIER    

sleVoipMgcpAgentControlRequest 1.3.6.1.4.1.6296.101.25.6.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableVoipMgcpAgent(1), disableVoipMgcpAgent(2)  

sleVoipMgcpAgentControlStatus 1.3.6.1.4.1.6296.101.25.6.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipMgcpAgentControlTimer 1.3.6.1.4.1.6296.101.25.6.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipMgcpAgentControlTimeStamp 1.3.6.1.4.1.6296.101.25.6.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipMgcpAgentControlReqResult 1.3.6.1.4.1.6296.101.25.6.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipMgcpAgentControlIndex 1.3.6.1.4.1.6296.101.25.6.2.6
The index of mgcp agent. Setting mgcp agent index .Range from 1 to 8.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sleVoipMgcpAgentControlCallAgent 1.3.6.1.4.1.6296.101.25.6.2.7
Setting IP address of destination prefix
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipMgcpAgentControlCallAgentPort 1.3.6.1.4.1.6296.101.25.6.2.8
Description. Setting Agent-Port number, value is from 1-65535.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleVoipMgcpAgentControlPort 1.3.6.1.4.1.6296.101.25.6.2.9
Description. Setting local-Port number, value is from 1-65535.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleVoipMgcpAgentControlTOS 1.3.6.1.4.1.6296.101.25.6.2.10
Setting Type of service .value is from 0-63.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

sleVoipMgcpAgentControlVendor 1.3.6.1.4.1.6296.101.25.6.2.11
Setting Type of vendor (DSSW:DasanSwitch,MSSW:MetaSwitch,G6SW:G6Switch,CSSW:C15Switch)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dssw(1), mssw(2), g6sw(3), cssw(4)  

sleVoipMgcpAgentControlDNS 1.3.6.1.4.1.6296.101.25.6.2.12
Set domain name to Mgcp Agent. (Optional) to explain each group, up to 32 characters string include Null character.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipMgcpAgentControlProfileName 1.3.6.1.4.1.6296.101.25.6.2.13
The profile name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipMgcpAgentNotification 1.3.6.1.4.1.6296.101.25.6.3
OBJECT IDENTIFIER    

sleVoipMgcpAgentEnabled 1.3.6.1.4.1.6296.101.25.6.3.1
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipMgcpAgentDisabled 1.3.6.1.4.1.6296.101.25.6.3.2
DESCRIPTION:
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipPots 1.3.6.1.4.1.6296.101.25.7
OBJECT IDENTIFIER    

sleVoipPotsStatusTable 1.3.6.1.4.1.6296.101.25.7.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipPotsStatusEntry

sleVoipPotsStatusEntry 1.3.6.1.4.1.6296.101.25.7.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipPotsStatusEntry  

sleVoipPotsStatusIndex 1.3.6.1.4.1.6296.101.25.7.1.1.1
DESCRIPTION: Display status of ports <1-8>
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

sleVoipPotsStatus 1.3.6.1.4.1.6296.101.25.7.1.1.2
DESCRIPTION: Setting pots status.Value is idle(0)|twoway(1)|threeway(2)|fax(3)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), twoway(1), threeway(2), fax(3)  

sleVoipPotsStatusHookState 1.3.6.1.4.1.6296.101.25.7.1.1.3
Hook status. Value is on(0)|off(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(0), off(1)  

sleVoipPotsStatusRegisterState 1.3.6.1.4.1.6296.101.25.7.1.1.4
Register Status. Value is out(0)|in(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER out(0), in(1)  

sleVoipMediaProfile 1.3.6.1.4.1.6296.101.25.8
OBJECT IDENTIFIER    

sleVoipMediaProfileTable 1.3.6.1.4.1.6296.101.25.8.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipMediaProfileEntry

sleVoipMediaProfileEntry 1.3.6.1.4.1.6296.101.25.8.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipMediaProfileEntry  

sleVoipMediaProfileIndex 1.3.6.1.4.1.6296.101.25.8.1.1.1
The index of Media Profile (1..8)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipMediaProfileCodecSelection 1.3.6.1.4.1.6296.101.25.8.1.1.2
Voice codec setting : G711 a-law codec, G711 mu-law codec, G.723 Codec standard, G.729 Codec standard.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pcmu(0), g723(4), pcma(8), g729(18)  

sleVoipMediaProfilePacketPeriod 1.3.6.1.4.1.6296.101.25.8.1.1.3
Packet Period setting. Range value is from 10 to 30 ms. Default value is 10ms.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 10..30  

sleVoipMediaProfileSilenceSuppression 1.3.6.1.4.1.6296.101.25.8.1.1.4
Silence suppression setting. Off(0), on(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipMediaProfileControl 1.3.6.1.4.1.6296.101.25.8.2
OBJECT IDENTIFIER    

sleVoipMediaProfileControlRequest 1.3.6.1.4.1.6296.101.25.8.2.1
Description. The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableVoipMediaProfile(1), disableVoipMediaProfile(2)  

sleVoipMediaProfileControlStatus 1.3.6.1.4.1.6296.101.25.8.2.2
Description. The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipMediaProfileControlTimer 1.3.6.1.4.1.6296.101.25.8.2.3
Description. The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipMediaProfileControlTimeStamp 1.3.6.1.4.1.6296.101.25.8.2.4
Description. The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipMediaProfileControlReqResult 1.3.6.1.4.1.6296.101.25.8.2.5
Description. The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipMediaProfileControlIndex 1.3.6.1.4.1.6296.101.25.8.2.6
The index of Media Profile (1.8)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sleVoipMediaProfileControlCodecSelection 1.3.6.1.4.1.6296.101.25.8.2.7
Voice codec : G711 a-law codec, G711 mu-law codec, G.723 Codec standard, G.729 Codec standard.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pcmu(0), g723(4), pcma(8), g729(18)  

sleVoipMediaProfileControlPacketPeriod 1.3.6.1.4.1.6296.101.25.8.2.8
Packet Period setting. Range value is from 10 to 30 ms. Default value is 10ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..30  

sleVoipMediaProfileControlSilenceSuppression 1.3.6.1.4.1.6296.101.25.8.2.9
Silence suppression setting. Off(0), on(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipMediaProfileNotification 1.3.6.1.4.1.6296.101.25.8.3
OBJECT IDENTIFIER    

sleVoipMediaProfileEnabled 1.3.6.1.4.1.6296.101.25.8.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipMediaProfileDisabled 1.3.6.1.4.1.6296.101.25.8.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipRtpProfile 1.3.6.1.4.1.6296.101.25.9
OBJECT IDENTIFIER    

sleVoipRtpProfileInfo 1.3.6.1.4.1.6296.101.25.9.1
OBJECT IDENTIFIER    

sleVoipRtpProfilePortMin 1.3.6.1.4.1.6296.101.25.9.1.1
Set the starting local port for RTP. Default value is 30000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 30000..60000  

sleVoipRtpProfileDscpMark 1.3.6.1.4.1.6296.101.25.9.1.2
Marks the DSCP with the given number. Default value is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleVoipRtpProfileOob 1.3.6.1.4.1.6296.101.25.9.1.3
Enable Out-of-band DTMF. When this option is enable, DTMF can be tranferred via RTP or signalling packet depending on the value of dtmf-event is enable or disable,respectively.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipRtpProfileDtmfEvent 1.3.6.1.4.1.6296.101.25.9.1.4
Enable DTMF transfer via RTP. If oob-dtmf is disable, this value is ignored.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipRtpProfileControl 1.3.6.1.4.1.6296.101.25.9.2
OBJECT IDENTIFIER    

sleVoipRtpProfileControlRequest 1.3.6.1.4.1.6296.101.25.9.2.1
Description. The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setVoipRtpPortMin(1), setVoipRtpDscp(2), setVoipRtpOob(3), setVoipRtpDtmf(4)  

sleVoipRtpProfileControlStatus 1.3.6.1.4.1.6296.101.25.9.2.2
Description. The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipRtpProfileControlTimer 1.3.6.1.4.1.6296.101.25.9.2.3
Description. The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipRtpProfileControlTimeStamp 1.3.6.1.4.1.6296.101.25.9.2.4
Description. The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipRtpProfileControlReqResult 1.3.6.1.4.1.6296.101.25.9.2.5
Description. The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipRtpProfileControlPortMin 1.3.6.1.4.1.6296.101.25.9.2.6
Set the starting local port for RTP. Default value is 30000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30000..60000  

sleVoipRtpProfileControlDscpMark 1.3.6.1.4.1.6296.101.25.9.2.7
Marks the DSCP with the given number. Default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

sleVoipRtpProfileControlOob 1.3.6.1.4.1.6296.101.25.9.2.8
Enable Out-of-band DTMF. When this option is enable, DTMF can be tranferred via RTP or signalling packet depending on the value of dtmf-event is enable or disable,respectively.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipRtpProfileControlDtmfEvent 1.3.6.1.4.1.6296.101.25.9.2.9
Enable DTMF transfer via RTP. If oob-dtmf is disable, this value is ignored.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleVoipRtpProfileNotification 1.3.6.1.4.1.6296.101.25.9.3
OBJECT IDENTIFIER    

sleVoipRtpProfilePortMinChanged 1.3.6.1.4.1.6296.101.25.9.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipRtpProfileDscpMarkChanged 1.3.6.1.4.1.6296.101.25.9.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipRtpProfileOobChanged 1.3.6.1.4.1.6296.101.25.9.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipRtpProfileDtmfEventChanged 1.3.6.1.4.1.6296.101.25.9.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipTimer 1.3.6.1.4.1.6296.101.25.10
OBJECT IDENTIFIER    

sleVoipTimerTable 1.3.6.1.4.1.6296.101.25.10.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipTimerEntry

sleVoipTimerEntry 1.3.6.1.4.1.6296.101.25.10.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipTimerEntry  

sleVoipTimerIndex 1.3.6.1.4.1.6296.101.25.10.1.1.1
Description. Display Timer index. Value is range from 1 to 8
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipTimerCriticalTimeout 1.3.6.1.4.1.6296.101.25.10.1.1.2
Critical timeout value (default 0ms)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15000  

sleVoipTimerFirstDigit 1.3.6.1.4.1.6296.101.25.10.1.1.3
First Digit Value (default 15000ms)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 10000..30000  

sleVoipTimerIntraDigit 1.3.6.1.4.1.6296.101.25.10.1.1.4
Intra Digit value(Default 5000ms)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5000..15000  

sleVoipTimerControl 1.3.6.1.4.1.6296.101.25.10.2
OBJECT IDENTIFIER    

sleVoipTimerControlRequest 1.3.6.1.4.1.6296.101.25.10.2.1
Description. The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableVoipTimer(1), disableVoipTimer(2)  

sleVoipTimerControlStatus 1.3.6.1.4.1.6296.101.25.10.2.2
Description. The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipTimerControlTimer 1.3.6.1.4.1.6296.101.25.10.2.3
Description. The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipTimerControlTimeStamp 1.3.6.1.4.1.6296.101.25.10.2.4
Description. The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipTimerControlReqResult 1.3.6.1.4.1.6296.101.25.10.2.5
Description. The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipTimerControlIndex 1.3.6.1.4.1.6296.101.25.10.2.6
Description. Setting Timer index. Value is range from 1 to 8
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sleVoipTimerControlCriticalTimeout 1.3.6.1.4.1.6296.101.25.10.2.7
Description. Critical timeout value (default 0ms)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..15000  

sleVoipTimerControlFirstDigit 1.3.6.1.4.1.6296.101.25.10.2.8
Description. First Digit Value (default 15000ms)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10000..30000  

sleVoipTimerControlIntraDigit 1.3.6.1.4.1.6296.101.25.10.2.9
Description. Intra Digit value(Default 5000ms)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5000..15000  

sleVoipTimerNotification 1.3.6.1.4.1.6296.101.25.10.3
OBJECT IDENTIFIER    

sleVoipTimerEnabled 1.3.6.1.4.1.6296.101.25.10.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipTimerDisabled 1.3.6.1.4.1.6296.101.25.10.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipDialPlan 1.3.6.1.4.1.6296.101.25.11
OBJECT IDENTIFIER    

sleVoipDialPlanTable 1.3.6.1.4.1.6296.101.25.11.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipDialPlanEntry

sleVoipDialPlanEntry 1.3.6.1.4.1.6296.101.25.11.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipDialPlanEntry  

sleVoipDialPlanPotStatusIndex 1.3.6.1.4.1.6296.101.25.11.1.1.1
Description. Display pots status index. Value is range from 1 to 8
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipDialPlanIndex 1.3.6.1.4.1.6296.101.25.11.1.1.2
Description. Dial-plan index. Value is range from 1 to 16
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sleVoipDialPlanDigitMap 1.3.6.1.4.1.6296.101.25.11.1.1.3
Description. Digit Map string. The format is 0123456789.x
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleVoipDialPlanControl 1.3.6.1.4.1.6296.101.25.11.2
OBJECT IDENTIFIER    

sleVoipDialPlanControlRequest 1.3.6.1.4.1.6296.101.25.11.2.1
Description. The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enableVoipDialPlan(1), disableVoipDialPlan(2)  

sleVoipDialPlanControlStatus 1.3.6.1.4.1.6296.101.25.11.2.2
Description. The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleVoipDialPlanControlTimer 1.3.6.1.4.1.6296.101.25.11.2.3
Description. The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleVoipDialPlanControlTimeStamp 1.3.6.1.4.1.6296.101.25.11.2.4
Description. The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleVoipDialPlanControlReqResult 1.3.6.1.4.1.6296.101.25.11.2.5
Description. The result of the last user command
Status: current Access: read-write
OBJECT-TYPE    
  SleControlRequestResultType  

sleVoipDialPlanControlPotStatusIndex 1.3.6.1.4.1.6296.101.25.11.2.6
Description. Pots status index. Value is range from 1 to 8
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

sleVoipDialPlanControlIndex 1.3.6.1.4.1.6296.101.25.11.2.7
Description. Dial-plan index. Value is range from 1 to 16
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

sleVoipDialPlanControlDigitMap 1.3.6.1.4.1.6296.101.25.11.2.8
Description. Digit Map string. The format is 0123456789.x. Characters can be 0123456789.x-[]T
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleVoipDialPlanNotification 1.3.6.1.4.1.6296.101.25.11.3
OBJECT IDENTIFIER    

sleVoipDialPlanEnabled 1.3.6.1.4.1.6296.101.25.11.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipDialPlanDisabled 1.3.6.1.4.1.6296.101.25.11.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleVoipStatistics 1.3.6.1.4.1.6296.101.25.12
OBJECT IDENTIFIER    

sleVoipStatisticsTable 1.3.6.1.4.1.6296.101.25.12.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleVoipStatisticsEntry

sleVoipStatisticsEntry 1.3.6.1.4.1.6296.101.25.12.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleVoipStatisticsEntry  

sleVoipStatisticsIndex 1.3.6.1.4.1.6296.101.25.12.1.1.1
Index of voip pots. Value is range from 1 to 8
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

sleVoipStatisticsFormat 1.3.6.1.4.1.6296.101.25.12.1.1.2
Format revision
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsCallTimer 1.3.6.1.4.1.6296.101.25.12.1.1.3
Call Timer is number of Rx Voice bytes
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsCurrentPlayoutDelay 1.3.6.1.4.1.6296.101.25.12.1.1.4
Current delay, measured in milliseconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsMinPlayoutDelay 1.3.6.1.4.1.6296.101.25.12.1.1.5
The minimum playout delay observed during the current voice session
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsMaxPlayoutDelay 1.3.6.1.4.1.6296.101.25.12.1.1.6
The maximum playout delay observed during the current voice session
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsClockOffset 1.3.6.1.4.1.6296.101.25.12.1.1.7
Description. The time offset between the remote source and the current source
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsPeakJitter 1.3.6.1.4.1.6296.101.25.12.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsInterpolativeConcealment 1.3.6.1.4.1.6296.101.25.12.1.1.9
Description. The duration of voice interpolation to PCM is incremented when the voice decoder interpolates the missing frames to preserve audio continuity.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsSilenceConcealment 1.3.6.1.4.1.6296.101.25.12.1.1.10
Description. The duration of silence interpolation to PCM is incremented when the voice decoder performs silence concealment of a missing frame.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsOverflowDiscard 1.3.6.1.4.1.6296.101.25.12.1.1.11
Description. The duration of Jitter Buffer Overflow Discard
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsEndpointDetectionErrors 1.3.6.1.4.1.6296.101.25.12.1.1.12
The number of End-point Detection errors
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsTxVoicePackets 1.3.6.1.4.1.6296.101.25.12.1.1.13
Description. The number of voice packets sent to IP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsTxSignalingPackets 1.3.6.1.4.1.6296.101.25.12.1.1.14
Description. The number of packets with payload type Redundant, DTMF or NTE packets sent to IP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsTxComfortNoisePackets 1.3.6.1.4.1.6296.101.25.12.1.1.15
Description. Transmit Comfort Noise Packets. The number of SID packets sent to IP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsTotalTransmitDuration 1.3.6.1.4.1.6296.101.25.12.1.1.16
Description. The total duration of the voice transmission.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsVoiceTransmitDuration 1.3.6.1.4.1.6296.101.25.12.1.1.17
Description. The duration of voice transmission when voice is active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsRxVoicePackets 1.3.6.1.4.1.6296.101.25.12.1.1.18
Description. The number of voice packets received from IP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsRxSignalingPackets 1.3.6.1.4.1.6296.101.25.12.1.1.19
Description. The number of packets with payload type Redundant or DTMF or NTE packets received from IP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsRxComfortNoisePackets 1.3.6.1.4.1.6296.101.25.12.1.1.20
Description. Receive Comfort Noise Packets. The number of SID packets received from IP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsTotalReceiveDuration 1.3.6.1.4.1.6296.101.25.12.1.1.21
Description. The total duration of the voice transmission.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsVoiceReceiveDuration 1.3.6.1.4.1.6296.101.25.12.1.1.22
Description. The total duration of the voice receive.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsPacketsOutSequence 1.3.6.1.4.1.6296.101.25.12.1.1.23
Description. The number of out of sequence packets received from IP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsBadProtocolHeaders 1.3.6.1.4.1.6296.101.25.12.1.1.24
Description. Bad Protocol headers. Following packets will be rejected because of a bad protocol header
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsLatePackets 1.3.6.1.4.1.6296.101.25.12.1.1.25
Description. Real Late Packets are defined as packets with sequence numbers that are received after having been declared late.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsEarlyPackets 1.3.6.1.4.1.6296.101.25.12.1.1.26
Description. Early Packets
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsRxVoiceOctets 1.3.6.1.4.1.6296.101.25.12.1.1.27
Description. Total number of bytes in the received voice packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsLostPackets 1.3.6.1.4.1.6296.101.25.12.1.1.28
Description. The Lost Packet Count is calculated as: Declared Late Packets - Real Late Packets
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsCurrentTransmitPower 1.3.6.1.4.1.6296.101.25.12.1.1.29
Description. Measured power (in dBov) of the signal being sent by the Mindspeed Comcerto Device over the circuit switched network.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsMeanTransmitPower 1.3.6.1.4.1.6296.101.25.12.1.1.30
Description. Mean Transmit Power. Running mean (average) of measured Tx Powers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsCurrentReceivePower 1.3.6.1.4.1.6296.101.25.12.1.1.31
Description. Current Receive Power. Measured power (in dBov) of the signal being received by the Mindspeed Comcerto Device from the circuit switched network.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsMeanReceivePower 1.3.6.1.4.1.6296.101.25.12.1.1.32
Description. Mean Receive Power .Running mean (average) of measured Rx Powers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsBackgroundNoise 1.3.6.1.4.1.6296.101.25.12.1.1.33
Description. Measured power (in dBov) of the estimated background noise level sent by the Comcerto Device over the circuit switched network.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsErlLevel 1.3.6.1.4.1.6296.101.25.12.1.1.34
Description. The ERL is the attenuation of a signal from the receive-out port to the send-in port of an echo canceller, due to transmission and hybrid loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsAcomLevel 1.3.6.1.4.1.6296.101.25.12.1.1.35
Description. The ACOM is the attenuation of a signal from the receive-out port to the send-out port of an echo canceller,
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsCurrentTransmitActivity 1.3.6.1.4.1.6296.101.25.12.1.1.36
Description. Binary decision indicating whether the signal currently being sent by the Mindspeed Comcerto Device over the circuit switched network is voice (1) or silence (0).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipStatisticsCurrentReceiveActivity 1.3.6.1.4.1.6296.101.25.12.1.1.37
Description. Binary decision indicating whether the signal currently being received by the Mindspeed Comcerto Device from the circuit switched network is voice (1) or silence (0).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleVoipGroup 1.3.6.1.4.1.6296.101.25.13
Description.
Status: current Access: read-only
OBJECT-GROUP    

sleVoipNotificationGroup 1.3.6.1.4.1.6296.101.25.14
Description.
Status: current Access: read-only
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor