SLE-OSPFv3-MIB

File: SLE-OSPFv3-MIB.mib (110743 bytes)

Imported modules

DASAN-SMI INET-ADDRESS-MIB SLE-TC-MIB
SNMPv2-CONF SNMPv2-SMI

Imported symbols

sleMgmt InetAddressIPv4 InetAddressIPv6
SleControlStatusType SleControlRequestResultType OBJECT-GROUP
NOTIFICATION-GROUP TimeTicks IpAddress
Integer32 Unsigned32 Gauge32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE

Defined Types

SleOspfv3ProcInfoEntry  
SEQUENCE    
  sleOspfv3ProcIndex INTEGER
  sleOspfv3ProcTag OCTET STRING
  sleOspfv3ProcRouterId InetAddressIPv4
  sleOspfv3ProcSpfDelayTime INTEGER
  sleOspfv3ProcSpfHoldTime INTEGER
  sleOspfv3ProcAutoCost INTEGER
  sleOspfv3ProcAbrType INTEGER
  sleOspfv3ProcDefaultMetric INTEGER
  sleOspfv3ProcMaxConcurrentDD INTEGER
  sleOspfv3ProcDefaultOriginType INTEGER
  sleOspfv3ProcDefaultOriginMetricType INTEGER
  sleOspfv3ProcDefaultOriginMetric INTEGER
  sleOspfv3ProcDefaultOriginRouteMap OCTET STRING
  sleOspfv3ProcLogNeighborChange INTEGER
  sleOspfv3ProcBfdAllIf INTEGER
  sleOspfv3ProcEfmAllIf INTEGER
  sleOspfv3ProcVRIndex INTEGER
  sleOspfv3ProcVRFName OCTET STRING
  sleOspfv3ProcSPFStartDelay INTEGER
  sleOspfv3ProcSPFMinDelay INTEGER
  sleOspfv3ProcSPFMaxDelay INTEGER
  sleOspfv3ProcLSAStartDelay INTEGER
  sleOspfv3ProcLSAMinDelay INTEGER
  sleOspfv3ProcLSAMaxDelay INTEGER
  sleOspfv3ProcLSAArrivalDelay INTEGER

SleOspfv3ProcSummaryEntry  
SEQUENCE    
  sleOspfv3ProcSummaryAddress InetAddressIPv6
  sleOspfv3ProcSummaryMask INTEGER
  sleOspfv3ProcSummaryTag Gauge32
  sleOspfv3ProcSummaryAdvertiseFlag INTEGER

SleOspfv3ProcPassiveIfEntry  
SEQUENCE    
  sleOspfv3ProcPassiveIfIndex INTEGER

SleOspfv3ProcRedistEntry  
SEQUENCE    
  sleOspfv3ProcRedistType INTEGER
  sleOspfv3ProcRedistMetricType INTEGER
  sleOspfv3ProcRedistMetric INTEGER
  sleOSpfv3ProcRedistRouteMapName OCTET STRING

SleOspfv3ProcAreaInfoEntry  
SEQUENCE    
  sleOspfv3ProcAreaInfoIndex IpAddress
  sleOspfv3ProcAreaInfoType INTEGER
  sleOspfv3ProcAreaInfoDefaultCost INTEGER
  sleOspfv3ProcAreaInfoSummary INTEGER

SleOspfv3ProcAreaRangeEntry  
SEQUENCE    
  sleOspfv3ProcAreaRangeAddress InetAddressIPv6
  sleOspfv3ProcAreaRangeMask INTEGER
  sleOspfv3ProcAreaRangeAdvertiseFlag INTEGER

SleOspfv3ProcAreaVlinkEntry  
SEQUENCE    
  sleOspfv3ProcAreaVlinkRouterId InetAddressIPv4
  sleOspfv3ProcAreaVlinkDeadInterval INTEGER
  sleOspfv3ProcAreaVlinkHelloInterval INTEGER
  sleOspfv3ProcAreaVlinkInstanceId INTEGER
  sleOspfv3ProcAreaVlinkRetransInterval INTEGER
  sleOspfv3ProcAreaVlinkTransDelay INTEGER

SleOspfv3IfInstanceEntry  
SEQUENCE    
  sleOspfv3IfInstanceIfIndex Integer32
  sleOspfv3IfInstanceInstanceId Integer32
  sleOspfv3IfInstanceProcTag OCTET STRING
  sleOspfv3IfInstanceAreaFlag INTEGER
  sleOspfv3IfInstanceAreaIndex IpAddress
  sleOspfv3IfInstanceDeadInterval Integer32
  sleOspfv3IfInstanceHelloInterval Integer32
  sleOspfv3IfInstanceNetworkType INTEGER
  sleOspfv3IfInstanceCost Integer32
  sleOspfv3IfInstanceTransDelay Integer32
  sleOspfv3IfInstanceRetransInterval Integer32
  sleOspfv3IfInstancePriority Integer32
  sleOspfv3IfInstanceBfd INTEGER
  sleOspfv3IfInstanceEfm INTEGER

SleOspfv3IfNeighborEntry  
SEQUENCE    
  sleOspfv3IfNeighborAddress InetAddressIPv6
  sleOspfv3IfNeighborCost Integer32
  sleOspfv3IfNeighborPollIntervalFlag INTEGER
  sleOspfv3IfNeighborPollIntervalValue Unsigned32
  sleOspfv3IfNeighborPriority Integer32

SleOspfv3IfStatusEntry  
SEQUENCE    
  sleOspfv3IfStatusProcTag OCTET STRING
  sleOspfv3IfStatusAreaId InetAddressIPv4
  sleOspfv3IfStatusNetworkType INTEGER
  sleOspfv3IfStatusCost INTEGER
  sleOspfv3IfStatusTransDelay INTEGER
  sleOspfv3IfStatusState INTEGER
  sleOspfv3IfStatusPriority INTEGER
  sleOspfv3IfStatusDRRouterId InetAddressIPv4
  sleOspfv3IfStatusDRAddress InetAddressIPv6
  sleOspfv3IfStatusBackupRouterId InetAddressIPv4
  sleOspfv3IfStatusBackupAddress InetAddressIPv6
  sleOspfv3IfStatusHelloInterval INTEGER
  sleOspfv3IfStatusDeadInterval INTEGER
  sleOspfv3IfStatusWaitInterval INTEGER
  sleOspfv3IfStatusRetransInterval INTEGER
  sleOspfv3IfNeighborCount INTEGER
  sleOspfv3IfAdjNeighborCount INTEGER

SleOspfv3LsdbEntry  
SEQUENCE    
  sleOspfv3LsdbType INTEGER
  sleOspfv3LsdbLinkStateId InetAddressIPv4
  sleOspfv3LsdbAdvRouterId InetAddressIPv4
  sleOspfv3LsdbAge Integer32
  sleOspfv3LsdbSeqnum Unsigned32
  sleOspfv3LsdbLength Integer32

SleOspfv3NeigborEntry  
SEQUENCE    
  sleOspfv3NeighborIfType INTEGER
  sleOspfv3NeighborIfIndex Unsigned32
  sleOspfv3NeighborRouterId InetAddressIPv4
  sleOspfv3NeighborAddress InetAddressIPv6
  sleOspfv3NeighborAreaId InetAddressIPv4
  sleOspfv3NeighborIfName OCTET STRING
  sleOspfv3NeighborPriority INTEGER
  sleOspfv3NeighborState INTEGER
  sleOspfv3NeighborInstanceId Integer32
  sleOspfv3NeighborDRRouterId InetAddressIPv4
  sleOspfv3NeighborBDRRouterId InetAddressIPv4
  sleOspfv3NeighborOption BITS
  sleOspfv3NeighborDeadTime TimeTicks
  sleOspfv3NeighborLsdbCount Unsigned32
  sleOspfv3NeighborLsreqCount Unsigned32
  sleOspfv3NeighborLsrxmitCount Unsigned32

SleOspfv3RouteEntry  
SEQUENCE    
  sleOspfv3RouteNetAddr InetAddressIPv6
  sleOspfv3RouteNetMask INTEGER
  sleOspfv3RouteNexthop InetAddressIPv6
  sleOspfv3RouteType INTEGER
  sleOspfv3RouteMetric INTEGER
  sleOspfv3RouteIfName OCTET STRING
  sleOspfv3RouteAreaFlag INTEGER
  sleOspfv3RouteAreaId InetAddressIPv4

Defined Values

sleOSPFv3 1.3.6.1.4.1.6296.101.52
Description.
MODULE-IDENTITY    

sleOspfv3Base 1.3.6.1.4.1.6296.101.52.1
OBJECT IDENTIFIER    

sleOspfv3BaseInfo 1.3.6.1.4.1.6296.101.52.1.1
OBJECT IDENTIFIER    

sleOspfv3RouteDisplayMode 1.3.6.1.4.1.6296.101.52.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER singleLine(0), multiLine(1)  

sleOspfv3RestartPeriod 1.3.6.1.4.1.6296.101.52.1.1.2
OSPF Graceful-restart period
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1800  

sleOspfv3RestartHelperPolicy 1.3.6.1.4.1.6296.101.52.1.1.3
OSPF Graceful-restart local policy by helper mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER never(1), onlyReload(2), onlyUpgrade(3), reloadUpgrade(4)  

sleOspfv3RestartHelperPeriod 1.3.6.1.4.1.6296.101.52.1.1.4
OSPF Graceful-restart local policy period by helper mode
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1800  

sleOspfv3SnmpNotification 1.3.6.1.4.1.6296.101.52.1.1.5
Snmp notification status of OSPF.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3BaseControl 1.3.6.1.4.1.6296.101.52.1.2
OBJECT IDENTIFIER    

sleOspfv3ControlRequest 1.3.6.1.4.1.6296.101.52.1.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setOspfv3RouteDisplayMode(1), setOspfv3RestartPeriod(2), setOspfv3RestartHelperProfile(3), restartOspfv3Graceful(4), setSnmpNotification(5)  

sleOspfv3ControlStatus 1.3.6.1.4.1.6296.101.52.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ControlTimer 1.3.6.1.4.1.6296.101.52.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ControlTimeStamp 1.3.6.1.4.1.6296.101.52.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ControlReqResult 1.3.6.1.4.1.6296.101.52.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ControlRouteDisplayMode 1.3.6.1.4.1.6296.101.52.1.2.6
Display Mode of OSPFv3 Route.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER singleLine(0), multiLine(1)  

sleOspfv3ControlRestartPeriod 1.3.6.1.4.1.6296.101.52.1.2.7
OSPFv3 Graceful-restart period.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1800  

sleOspfv3ControlRestartHelperPolicy 1.3.6.1.4.1.6296.101.52.1.2.8
Tag of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unspec(0), never(1), onlyReload(2), onlyUpgrade(3), reloadUpgrade(4)  

sleOspfv3ControlRestartHelperPeriod 1.3.6.1.4.1.6296.101.52.1.2.9
OSPF Graceful-restart local policy period by helper mode
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1800  

sleOspfv3ControlSnmpNotification 1.3.6.1.4.1.6296.101.52.1.2.10
Snmp notification status of OSPF.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3BaseNotification 1.3.6.1.4.1.6296.101.52.1.3
OBJECT IDENTIFIER    

sleOspfv3RouteDisplayModeChanged 1.3.6.1.4.1.6296.101.52.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3RestartPeriodChanged 1.3.6.1.4.1.6296.101.52.1.3.2
setOspfv3RestartPeriod
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3RestartHelperProfileChanged 1.3.6.1.4.1.6296.101.52.1.3.3
setOspfv3RestartHelperProfile
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3GracefulRestarted 1.3.6.1.4.1.6296.101.52.1.3.4
restartOspfv3Graceful
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3SnmpNotificationiChanged 1.3.6.1.4.1.6296.101.52.1.3.5
setSnmpNotification
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3Proc 1.3.6.1.4.1.6296.101.52.2
OBJECT IDENTIFIER    

sleOspfv3ProcInfo 1.3.6.1.4.1.6296.101.52.2.1
OBJECT IDENTIFIER    

sleOspfv3ProcInfoTable 1.3.6.1.4.1.6296.101.52.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3ProcInfoEntry

sleOspfv3ProcInfoEntry 1.3.6.1.4.1.6296.101.52.2.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3ProcInfoEntry  

sleOspfv3ProcIndex 1.3.6.1.4.1.6296.101.52.2.1.1.1.1
Index of OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleOspfv3ProcTag 1.3.6.1.4.1.6296.101.52.2.1.1.1.2
Tag name of OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3ProcRouterId 1.3.6.1.4.1.6296.101.52.2.1.1.1.3
Router-Id in IPv4 Address format of this OSPFv3 Process. The size of 0 means that this process has not router-id.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3ProcSpfDelayTime 1.3.6.1.4.1.6296.101.52.2.1.1.1.4
SPF Delay-Time of this OSPFv3 Process. The value of -1 means default delay-time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

sleOspfv3ProcSpfHoldTime 1.3.6.1.4.1.6296.101.52.2.1.1.1.5
SPF Hold-Time of this OSPFv3 Process. The value of -1 means default hold-time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

sleOspfv3ProcAutoCost 1.3.6.1.4.1.6296.101.52.2.1.1.1.6
OSPFv3 Interface cost calculated according to bandwidth. The value of 0 means default auto-cost.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4294967  

sleOspfv3ProcAbrType 1.3.6.1.4.1.6296.101.52.2.1.1.1.7
ABR type of this OSPFv3 Process. Default value is 'cisco'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), standard(1), cisco(2), ibm(3), shortcut(4)  

sleOspfv3ProcDefaultMetric 1.3.6.1.4.1.6296.101.52.2.1.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16777214  

sleOspfv3ProcMaxConcurrentDD 1.3.6.1.4.1.6296.101.52.2.1.1.1.9
Maximum number allowed to process DD concurrently in this OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcDefaultOriginType 1.3.6.1.4.1.6296.101.52.2.1.1.1.10
If or not Always advertise default route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), normal(1), always(2)  

sleOspfv3ProcDefaultOriginMetricType 1.3.6.1.4.1.6296.101.52.2.1.1.1.11
Metric type for default route in this OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), external1(1), external2(2)  

sleOspfv3ProcDefaultOriginMetric 1.3.6.1.4.1.6296.101.52.2.1.1.1.12
Metric value for default route in this OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

sleOspfv3ProcDefaultOriginRouteMap 1.3.6.1.4.1.6296.101.52.2.1.1.1.13
Route-Map referenced by default route in this OSPFv3 Process. The size of 0 means that any route-map is not referenced.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3ProcLogNeighborChange 1.3.6.1.4.1.6296.101.52.2.1.1.1.14
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3ProcBfdAllIf 1.3.6.1.4.1.6296.101.52.2.1.1.1.15
If or not use bfd in all the interface refered by this process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3ProcEfmAllIf 1.3.6.1.4.1.6296.101.52.2.1.1.1.16
If or not use efm-oam in all the interface refered by this process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3ProcVRIndex 1.3.6.1.4.1.6296.101.52.2.1.1.1.17
VR Index of OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleOspfv3ProcVRFName 1.3.6.1.4.1.6296.101.52.2.1.1.1.18
VRF Name of OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

sleOspfv3ProcSPFStartDelay 1.3.6.1.4.1.6296.101.52.2.1.1.1.19
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcSPFMinDelay 1.3.6.1.4.1.6296.101.52.2.1.1.1.20
SPF Throttle Min Delay of OSPFv3 Timer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcSPFMaxDelay 1.3.6.1.4.1.6296.101.52.2.1.1.1.21
SPF Throttle Max Delay of OSPFv3 Timer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcLSAStartDelay 1.3.6.1.4.1.6296.101.52.2.1.1.1.22
LSA Throttle Start Delay of OSPFv3 Timer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcLSAMinDelay 1.3.6.1.4.1.6296.101.52.2.1.1.1.23
LSA Throttle Min Delay of OSPFv3 Timer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcLSAMaxDelay 1.3.6.1.4.1.6296.101.52.2.1.1.1.24
LSA Throttle Max Delay of OSPFv3 Timer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcLSAArrivalDelay 1.3.6.1.4.1.6296.101.52.2.1.1.1.25
LSA Arrival Delay of OSPFv3 Timer
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcInfoControl 1.3.6.1.4.1.6296.101.52.2.1.2
OBJECT IDENTIFIER    

sleOspfv3ProcControlRequest 1.3.6.1.4.1.6296.101.52.2.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createOspfv3Proc(1), setOspfv3Proc(2), destroyOspfv3Proc(3), clearOspfv3Proc(4)  

sleOspfv3ProcControlStatus 1.3.6.1.4.1.6296.101.52.2.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ProcControlTimer 1.3.6.1.4.1.6296.101.52.2.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ProcControlTimeStamp 1.3.6.1.4.1.6296.101.52.2.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ProcControlReqResult 1.3.6.1.4.1.6296.101.52.2.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ProcControlIndex 1.3.6.1.4.1.6296.101.52.2.1.2.6
Index of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcControlTag 1.3.6.1.4.1.6296.101.52.2.1.2.7
Tag name of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3ProcControlRouterId 1.3.6.1.4.1.6296.101.52.2.1.2.8
Router-Id in IPv4 Address format of this OSPFv3 Process. The size of 0 means that this process has not router-id.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3ProcControlSpfDelayTime 1.3.6.1.4.1.6296.101.52.2.1.2.9
SPF Delay-Time of this OSPFv3 Process. The value of -1 means default delay-time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

sleOspfv3ProcControlSpfHoldTime 1.3.6.1.4.1.6296.101.52.2.1.2.10
SPF Hold-Time of this OSPFv3 Process. The value of -1 means default hold-time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

sleOspfv3ProcControlAutoCost 1.3.6.1.4.1.6296.101.52.2.1.2.11
OSPFv3 Interface cost calculated according to bandwidth. The value of 0 means default auto-cost.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4294967  

sleOspfv3ProcControlAbrType 1.3.6.1.4.1.6296.101.52.2.1.2.12
ABR type of this OSPFv3 Process. Default value is 'cisco'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), standard(1), cisco(2), ibm(3), shortcut(4)  

sleOspfv3ProcControlDefaultMetric 1.3.6.1.4.1.6296.101.52.2.1.2.13
Default Metric value of this OSPFv3 Process. The value of -1 means default metric value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16777214  

sleOspfv3ProcControlMaxConcurrentDD 1.3.6.1.4.1.6296.101.52.2.1.2.14
Maximum number allowed to process DD concurrently in this OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcControlDefaultOriginType 1.3.6.1.4.1.6296.101.52.2.1.2.15
If or not Always advertise default route.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), normal(1), always(2)  

sleOspfv3ProcControlDefaultOriginMetricType 1.3.6.1.4.1.6296.101.52.2.1.2.16
Metric type for default route in this OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), external1(1), external2(2)  

sleOspfv3ProcControlDefaultOriginMetric 1.3.6.1.4.1.6296.101.52.2.1.2.17
Metric value for default route in this OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sleOspfv3ProcControlDefaultOriginRouteMap 1.3.6.1.4.1.6296.101.52.2.1.2.18
Route-Map referenced by default route in this OSPFv3 Process. The size of 0 means that any route-map is not referenced.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3ProcControlLogNeighborChange 1.3.6.1.4.1.6296.101.52.2.1.2.19
If or not logging neigbour-state change and reset reason.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3ProcControlBfdAllIf 1.3.6.1.4.1.6296.101.52.2.1.2.20
If or not use bfd in all the interface refered by this process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3ProcControlEfmAllIf 1.3.6.1.4.1.6296.101.52.2.1.2.21
If or not use efm-oam in all the interface refered by this process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleOspfv3ProcControlVRIndex 1.3.6.1.4.1.6296.101.52.2.1.2.22
VR Index of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcControlVRFName 1.3.6.1.4.1.6296.101.52.2.1.2.23
VRF Name of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3ProcControlSPFStartDelay 1.3.6.1.4.1.6296.101.52.2.1.2.24
SPF Throttle Start Delay of OSPFv3 Timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcControlSPFMinDelay 1.3.6.1.4.1.6296.101.52.2.1.2.25
SPF Throttle Min Delay of OSPFv3 Timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcControlSPFMaxDelay 1.3.6.1.4.1.6296.101.52.2.1.2.26
SPF Throttle Max Delay of OSPFv3 Timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcControlLSAStartDelay 1.3.6.1.4.1.6296.101.52.2.1.2.27
LSA Throttle Start Delay of OSPFv3 Timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcControlLSAMinDelay 1.3.6.1.4.1.6296.101.52.2.1.2.28
LSA Throttle Min Delay of OSPFv3 Timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcControlLSAMaxDelay 1.3.6.1.4.1.6296.101.52.2.1.2.29
LSA Throttle Max Delay of OSPFv3 Timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcControlLSAArrivalDelay 1.3.6.1.4.1.6296.101.52.2.1.2.30
LSA Arrival Delay of OSPFv3 Timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

sleOspfv3ProcInfoNotification 1.3.6.1.4.1.6296.101.52.2.1.3
OBJECT IDENTIFIER    

sleOspfv3ProcCreated 1.3.6.1.4.1.6296.101.52.2.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcProfileChanged 1.3.6.1.4.1.6296.101.52.2.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcDestroyed 1.3.6.1.4.1.6296.101.52.2.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcCleared 1.3.6.1.4.1.6296.101.52.2.1.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcSummary 1.3.6.1.4.1.6296.101.52.2.2
OBJECT IDENTIFIER    

sleOspfv3ProcSummaryTable 1.3.6.1.4.1.6296.101.52.2.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3ProcSummaryEntry

sleOspfv3ProcSummaryEntry 1.3.6.1.4.1.6296.101.52.2.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3ProcSummaryEntry  

sleOspfv3ProcSummaryAddress 1.3.6.1.4.1.6296.101.52.2.2.1.1.1
IPv6 Address summaries.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3ProcSummaryMask 1.3.6.1.4.1.6296.101.52.2.2.1.1.2
IPv6 Address summaries'mask length.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

sleOspfv3ProcSummaryTag 1.3.6.1.4.1.6296.101.52.2.2.1.1.3
IPv6 Address summaries'tag value.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

sleOspfv3ProcSummaryAdvertiseFlag 1.3.6.1.4.1.6296.101.52.2.2.1.1.4
Use suppress routes or tag.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAdvertise(0), tag(1)  

sleOspfv3rocSummaryControl 1.3.6.1.4.1.6296.101.52.2.2.2
OBJECT IDENTIFIER    

sleOspfv3ProcSummaryControlRequest 1.3.6.1.4.1.6296.101.52.2.2.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createOpsfv3ProcSummary(1), modifyOspfv3ProcSummary(2), delstroyOspfv3ProcSummary(3)  

sleOspfv3ProcSummaryControlStatus 1.3.6.1.4.1.6296.101.52.2.2.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ProcSummaryControlTimer 1.3.6.1.4.1.6296.101.52.2.2.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ProcSummaryControlTimeStamp 1.3.6.1.4.1.6296.101.52.2.2.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ProcSummaryControlReqResult 1.3.6.1.4.1.6296.101.52.2.2.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ProcSummaryControlIndex 1.3.6.1.4.1.6296.101.52.2.2.2.6
Index of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcSummaryControlAddress 1.3.6.1.4.1.6296.101.52.2.2.2.7
IPv6 Address summaries.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3ProcSummaryControlMask 1.3.6.1.4.1.6296.101.52.2.2.2.8
IPv6 Address summaries'mask length.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

sleOspfv3ProcSummaryControlTag 1.3.6.1.4.1.6296.101.52.2.2.2.9
IPv6 Address summaries'tag value.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32 0..4294967295  

sleOspfv3ProcSummaryControlAdvertiseFlag 1.3.6.1.4.1.6296.101.52.2.2.2.10
Use suppress routes or tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAdvertise(0), tag(1)  

sleOspfv3ProcSummaryNotification 1.3.6.1.4.1.6296.101.52.2.2.3
OBJECT IDENTIFIER    

sleOspfv3ProcSummaryCreated 1.3.6.1.4.1.6296.101.52.2.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcSummaryChanged 1.3.6.1.4.1.6296.101.52.2.2.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcSummaryDestroyed 1.3.6.1.4.1.6296.101.52.2.2.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcPassiveIf 1.3.6.1.4.1.6296.101.52.2.3
OBJECT IDENTIFIER    

sleOspfv3ProcPassiveIfTable 1.3.6.1.4.1.6296.101.52.2.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3ProcPassiveIfEntry

sleOspfv3ProcPassiveIfEntry 1.3.6.1.4.1.6296.101.52.2.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3ProcPassiveIfEntry  

sleOspfv3ProcPassiveIfIndex 1.3.6.1.4.1.6296.101.52.2.3.1.1.1
Index of Passive Interface in this OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4097  

sleOspfv3ProcPassIfControl 1.3.6.1.4.1.6296.101.52.2.3.2
OBJECT IDENTIFIER    

sleOspfv3ProcPassiveIfControlRequest 1.3.6.1.4.1.6296.101.52.2.3.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addOspfv3ProcPassiveIf(1), deleteOspfv3ProcPassiveIf(2)  

sleOspfv3ProcPassiveIfControlStatus 1.3.6.1.4.1.6296.101.52.2.3.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ProcPassiveIfControlTimer 1.3.6.1.4.1.6296.101.52.2.3.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ProcPassiveIfControlTimeStamp 1.3.6.1.4.1.6296.101.52.2.3.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ProcPassiveIfControlReqResult 1.3.6.1.4.1.6296.101.52.2.3.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ProcPassiveIfControlIndex 1.3.6.1.4.1.6296.101.52.2.3.2.6
Index of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcPassiveIfControlIfIndex 1.3.6.1.4.1.6296.101.52.2.3.2.7
Index of Passive Interface in this OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4097  

sleOspfv3ProcPassIfNotification 1.3.6.1.4.1.6296.101.52.2.3.3
OBJECT IDENTIFIER    

sleOspfv3ProcPassiveIfAdded 1.3.6.1.4.1.6296.101.52.2.3.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcPassiveIfDeleted 1.3.6.1.4.1.6296.101.52.2.3.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcRedist 1.3.6.1.4.1.6296.101.52.2.4
OBJECT IDENTIFIER    

sleOspfv3ProcRedistTable 1.3.6.1.4.1.6296.101.52.2.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3ProcRedistEntry

sleOspfv3ProcRedistEntry 1.3.6.1.4.1.6296.101.52.2.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3ProcRedistEntry  

sleOspfv3ProcRedistType 1.3.6.1.4.1.6296.101.52.2.4.1.1.1
Metric type for redistributed routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER kernel(1), connected(2), isis(3), static(4), rip(5), bgp(6)  

sleOspfv3ProcRedistMetricType 1.3.6.1.4.1.6296.101.52.2.4.1.1.2
Metric type for redistributed routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER external1(1), external2(2)  

sleOspfv3ProcRedistMetric 1.3.6.1.4.1.6296.101.52.2.4.1.1.3
Default Metric value of redistributed routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

sleOSpfv3ProcRedistRouteMapName 1.3.6.1.4.1.6296.101.52.2.4.1.1.4
Route-map name refered by this. The size of 0 means that it has not refered rout-map.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3ProcRedistControl 1.3.6.1.4.1.6296.101.52.2.4.2
OBJECT IDENTIFIER    

sleOspfv3ProcRedistControlRequest 1.3.6.1.4.1.6296.101.52.2.4.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createOspfv3ProcRedist(1), modifyOspfv3ProcRedist(2), destroyOspfv3ProcRedist(3)  

sleOspfv3ProcRedistControlStatus 1.3.6.1.4.1.6296.101.52.2.4.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ProcRedistControlTimer 1.3.6.1.4.1.6296.101.52.2.4.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ProcRedistControlTimeStamp 1.3.6.1.4.1.6296.101.52.2.4.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ProcRedistControlReqResult 1.3.6.1.4.1.6296.101.52.2.4.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ProcRedistControlIndex 1.3.6.1.4.1.6296.101.52.2.4.2.6
Index of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcRedistControlType 1.3.6.1.4.1.6296.101.52.2.4.2.7
Metric type for redistributed routes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER kernel(1), connected(2), isis(3), static(4), rip(5), bgp(6)  

sleOspfv3ProcRedistControlMetricType 1.3.6.1.4.1.6296.101.52.2.4.2.8
Metric type for redistributed routes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER external1(1), external2(2)  

sleOspfv3ProcRedistControlMetric 1.3.6.1.4.1.6296.101.52.2.4.2.9
Default Metric value of redistributed routes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16777215  

sleOSpfv3ProcRedistControlRouteMapName 1.3.6.1.4.1.6296.101.52.2.4.2.10
Route-map name refered by this. The size of 0 means that it has not refered rout-map.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3ProcRedistNotification 1.3.6.1.4.1.6296.101.52.2.4.3
OBJECT IDENTIFIER    

sleOspfv3ProcRedistCreated 1.3.6.1.4.1.6296.101.52.2.4.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcRedistChanged 1.3.6.1.4.1.6296.101.52.2.4.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcRedistDestroyed 1.3.6.1.4.1.6296.101.52.2.4.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcArea 1.3.6.1.4.1.6296.101.52.2.5
OBJECT IDENTIFIER    

sleOspfv3ProcAreaInfo 1.3.6.1.4.1.6296.101.52.2.5.1
OBJECT IDENTIFIER    

sleOspfv3ProcAreaInfoTable 1.3.6.1.4.1.6296.101.52.2.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3ProcAreaInfoEntry

sleOspfv3ProcAreaInfoEntry 1.3.6.1.4.1.6296.101.52.2.5.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3ProcAreaInfoEntry  

sleOspfv3ProcAreaInfoIndex 1.3.6.1.4.1.6296.101.52.2.5.1.1.1.1
Area ID in decimal.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleOspfv3ProcAreaInfoType 1.3.6.1.4.1.6296.101.52.2.5.1.1.1.2
Area Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER general(1), stub(2), nssa(3)  

sleOspfv3ProcAreaInfoDefaultCost 1.3.6.1.4.1.6296.101.52.2.5.1.1.1.3
Default cost of area. It is meaning only if area is a NSSA or stub. The value of -1 that this area has not significant default cost.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

sleOspfv3ProcAreaInfoSummary 1.3.6.1.4.1.6296.101.52.2.5.1.1.1.4
The controls the import of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAreaSummary(1), sendAreaSummary(2)  

sleOspfv3ProcAreaInfoControl 1.3.6.1.4.1.6296.101.52.2.5.1.2
OBJECT IDENTIFIER    

sleOspfv3ProcAreaInfoControlRequest 1.3.6.1.4.1.6296.101.52.2.5.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createOspfv3ProcAreaInfo(1), modifyOspfv3ProcAreaInfo(2), destroyOspfv3ProcAreaInfo(3)  

sleOspfv3ProcAreaInfoControlStatus 1.3.6.1.4.1.6296.101.52.2.5.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ProcAreaInfoControlTimer 1.3.6.1.4.1.6296.101.52.2.5.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ProcAreaInfoControlTimeStamp 1.3.6.1.4.1.6296.101.52.2.5.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ProcAreaInfoControlReqResult 1.3.6.1.4.1.6296.101.52.2.5.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ProcAreaInfoControlIndex 1.3.6.1.4.1.6296.101.52.2.5.1.2.6
Index of OSPFv3 Process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcAreaInfoControlAreaIndex 1.3.6.1.4.1.6296.101.52.2.5.1.2.7
Area ID in decimal.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleOspfv3ProcAreaInfoControlType 1.3.6.1.4.1.6296.101.52.2.5.1.2.8
Area Type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER general(1), stub(2), nssa(3)  

sleOspfv3ProcAreaInfoControlDefaultCost 1.3.6.1.4.1.6296.101.52.2.5.1.2.9
Area Type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sleOspfv3ProcAreaInfoControlSummary 1.3.6.1.4.1.6296.101.52.2.5.1.2.10
The controls the import of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noAreaSummary(1), sendAreaSummary(2)  

sleOspfv3ProcAreaInfoNotification 1.3.6.1.4.1.6296.101.52.2.5.1.3
OBJECT IDENTIFIER    

sleOspfv3ProcAreaInfoCreated 1.3.6.1.4.1.6296.101.52.2.5.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcAreaInfoChanged 1.3.6.1.4.1.6296.101.52.2.5.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcAreaInfoDestroyed 1.3.6.1.4.1.6296.101.52.2.5.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcAreaRange 1.3.6.1.4.1.6296.101.52.2.5.2
OBJECT IDENTIFIER    

sleOspfv3ProcAreaRangeTable 1.3.6.1.4.1.6296.101.52.2.5.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3ProcAreaRangeEntry

sleOspfv3ProcAreaRangeEntry 1.3.6.1.4.1.6296.101.52.2.5.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3ProcAreaRangeEntry  

sleOspfv3ProcAreaRangeAddress 1.3.6.1.4.1.6296.101.52.2.5.2.1.1.1
IPv6 Address of range.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3ProcAreaRangeMask 1.3.6.1.4.1.6296.101.52.2.5.2.1.1.2
IPv6 Address of range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

sleOspfv3ProcAreaRangeAdvertiseFlag 1.3.6.1.4.1.6296.101.52.2.5.2.1.1.3
Advertise or not this range of area.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAdvertise(0), advertise(1)  

sleOspfv3ProcAreaRangeControl 1.3.6.1.4.1.6296.101.52.2.5.2.2
OBJECT IDENTIFIER    

sleOspfv3ProcAreaRangeControlRequest 1.3.6.1.4.1.6296.101.52.2.5.2.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createOspfv3ProcAreaRange(1), modifyOspfv3ProcAreaRange(2), destroyOspfv3ProcAreaRange(3)  

sleOspfv3ProcAreaRangeControlStatus 1.3.6.1.4.1.6296.101.52.2.5.2.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ProcAreaRangeControlTimer 1.3.6.1.4.1.6296.101.52.2.5.2.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ProcAreaRangeControlTimeStamp 1.3.6.1.4.1.6296.101.52.2.5.2.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ProcAreaRangeControlReqResult 1.3.6.1.4.1.6296.101.52.2.5.2.2.5
Index of OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ProcAreaRangeControlIndex 1.3.6.1.4.1.6296.101.52.2.5.2.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcAreaRangeControlAreaIndex 1.3.6.1.4.1.6296.101.52.2.5.2.2.7
Area ID in decimal.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleOspfv3ProcAreaRangeControlAddr 1.3.6.1.4.1.6296.101.52.2.5.2.2.8
IPv6 Address of range
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3ProcAreaRangeControlMask 1.3.6.1.4.1.6296.101.52.2.5.2.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

sleOspfv3ProcAreaRangeControlAdvertiseFlag 1.3.6.1.4.1.6296.101.52.2.5.2.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAdvertise(0), advertise(1)  

sleOspfv3ProcAreaRangeNotification 1.3.6.1.4.1.6296.101.52.2.5.2.3
OBJECT IDENTIFIER    

sleOspfv3ProcAreaRangeCreated 1.3.6.1.4.1.6296.101.52.2.5.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcAreaRangeChanged 1.3.6.1.4.1.6296.101.52.2.5.2.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcAreaRangeDestroyed 1.3.6.1.4.1.6296.101.52.2.5.2.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    


sleOspfv3ProcAreaVlinkTable 1.3.6.1.4.1.6296.101.52.2.5.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3ProcAreaVlinkEntry

sleOspfv3ProcAreaVlinkEntry 1.3.6.1.4.1.6296.101.52.2.5.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3ProcAreaVlinkEntry  

sleOspfv3ProcAreaVlinkRouterId 1.3.6.1.4.1.6296.101.52.2.5.3.1.1.1
Router ID associated with this virtual-link neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3ProcAreaVlinkDeadInterval 1.3.6.1.4.1.6296.101.52.2.5.3.1.1.2
Dead router detection time in unit of second. The value of 0 means that this virtual-link has not specific dead-interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkHelloInterval 1.3.6.1.4.1.6296.101.52.2.5.3.1.1.3
Interval between hello packet in unit of second. The value of 0 means that this virtual-link has not specific hello-interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkInstanceId 1.3.6.1.4.1.6296.101.52.2.5.3.1.1.4
OSPFv3 instance ID of this virtual-link. The value of 0 means unspecific setting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

sleOspfv3ProcAreaVlinkRetransInterval 1.3.6.1.4.1.6296.101.52.2.5.3.1.1.5
LSA retransmit interval in unit of second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkTransDelay 1.3.6.1.4.1.6296.101.52.2.5.3.1.1.6
LSA transmission delay in unit of second. The value of 0 means that this virtual-link has not specific transmission-delay.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkControl 1.3.6.1.4.1.6296.101.52.2.5.3.2
OBJECT IDENTIFIER    

sleOspfv3ProcAreaVlinkControlRequest 1.3.6.1.4.1.6296.101.52.2.5.3.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createOspfv3ProcAreaVlink(1), modifyOspfv3ProcAreaVlink(2), destroyOspfv3ProcAreaVlink(3)  

sleOspfv3ProcAreaVlinkControlStatus 1.3.6.1.4.1.6296.101.52.2.5.3.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3ProcAreaVlinkControlTimer 1.3.6.1.4.1.6296.101.52.2.5.3.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3ProcAreaVlinkControlTimeStamp 1.3.6.1.4.1.6296.101.52.2.5.3.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3ProcAreaVlinkControlReqResult 1.3.6.1.4.1.6296.101.52.2.5.3.2.5
Index of OSPFv3 Process.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3ProcAreaVlinkControlIndex 1.3.6.1.4.1.6296.101.52.2.5.3.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3ProcAreaVlinkControlAreaIndex 1.3.6.1.4.1.6296.101.52.2.5.3.2.7
Area ID in decimal.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleOspfv3ProcAreaVlinkControlRouterId 1.3.6.1.4.1.6296.101.52.2.5.3.2.8
Router ID associated with this virtual-link neighbor.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3ProcAreaVlinkControlDeadInterval 1.3.6.1.4.1.6296.101.52.2.5.3.2.9
Dead router detection time in unit of second. The value of 0 means that this virtual-link has not specific dead-interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkControlHelloInterval 1.3.6.1.4.1.6296.101.52.2.5.3.2.10
Interval between hello packet in unit of second. The value of 0 means that this virtual-link has not specific hello-interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkControlInstanceId 1.3.6.1.4.1.6296.101.52.2.5.3.2.11
OSPFv3 instance ID of this virtual-link. The value of 0 means unspecific setting.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

sleOspfv3ProcAreaVlinkControlRetransInterval 1.3.6.1.4.1.6296.101.52.2.5.3.2.12
LSA retransmit interval in unit of second. The value of 0 means that this virtual-link has not specific retransmit-interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkControlTransDelay 1.3.6.1.4.1.6296.101.52.2.5.3.2.13
LSA transmission delay in unit of second. The value of 0 means that this virtual-link has not specific transmission-delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleOspfv3ProcAreaVlinkNotification 1.3.6.1.4.1.6296.101.52.2.5.3.3
OBJECT IDENTIFIER    

sleOspfv3ProcAreaVlinkCreated 1.3.6.1.4.1.6296.101.52.2.5.3.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcAreaVlinkChanged 1.3.6.1.4.1.6296.101.52.2.5.3.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3ProcAreaVlinkDestroyed 1.3.6.1.4.1.6296.101.52.2.5.3.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3Interface 1.3.6.1.4.1.6296.101.52.3
OBJECT IDENTIFIER    

sleOspfv3IfInstance 1.3.6.1.4.1.6296.101.52.3.1
OBJECT IDENTIFIER    

sleOspfv3IfInstanceTable 1.3.6.1.4.1.6296.101.52.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3IfInstanceEntry

sleOspfv3IfInstanceEntry 1.3.6.1.4.1.6296.101.52.3.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3IfInstanceEntry  

sleOspfv3IfInstanceIfIndex 1.3.6.1.4.1.6296.101.52.3.1.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4097  

sleOspfv3IfInstanceInstanceId 1.3.6.1.4.1.6296.101.52.3.1.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sleOspfv3IfInstanceProcTag 1.3.6.1.4.1.6296.101.52.3.1.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3IfInstanceAreaFlag 1.3.6.1.4.1.6296.101.52.3.1.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noArea(0), useArea(1)  

sleOspfv3IfInstanceAreaIndex 1.3.6.1.4.1.6296.101.52.3.1.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleOspfv3IfInstanceDeadInterval 1.3.6.1.4.1.6296.101.52.3.1.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleOspfv3IfInstanceHelloInterval 1.3.6.1.4.1.6296.101.52.3.1.1.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleOspfv3IfInstanceNetworkType 1.3.6.1.4.1.6296.101.52.3.1.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), p2p(1), broadcast(2), nbma(3), p2mp(4), p2mpNbma(5), virtualLink(6), loopback(7)  

sleOspfv3IfInstanceCost 1.3.6.1.4.1.6296.101.52.3.1.1.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..65535  

sleOspfv3IfInstanceTransDelay 1.3.6.1.4.1.6296.101.52.3.1.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleOspfv3IfInstanceRetransInterval 1.3.6.1.4.1.6296.101.52.3.1.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..65535  

sleOspfv3IfInstancePriority 1.3.6.1.4.1.6296.101.52.3.1.1.1.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sleOspfv3IfInstanceBfd 1.3.6.1.4.1.6296.101.52.3.1.1.1.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), disable(1), enable(2)  

sleOspfv3IfInstanceEfm 1.3.6.1.4.1.6296.101.52.3.1.1.1.14
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), disable(1), enable(2)  

sleOspfv3ProcIfInstanceControl 1.3.6.1.4.1.6296.101.52.3.1.2
OBJECT IDENTIFIER    

sleOspfv3IfInstanceControlRequest 1.3.6.1.4.1.6296.101.52.3.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setOspfv3IfInstance(1)  

sleOspfv3IfInstanceControlStatus 1.3.6.1.4.1.6296.101.52.3.1.2.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3IfInstanceControlTimer 1.3.6.1.4.1.6296.101.52.3.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3IfInstanceControlTimeStamp 1.3.6.1.4.1.6296.101.52.3.1.2.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  TimeTicks  

sleOspfv3IfInstanceControlReqResult 1.3.6.1.4.1.6296.101.52.3.1.2.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3IfInstanceControlIfIndex 1.3.6.1.4.1.6296.101.52.3.1.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4097  

sleOspfv3IfInstanceControlIfInstanceId 1.3.6.1.4.1.6296.101.52.3.1.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sleOspfv3IfInstanceControlProcTag 1.3.6.1.4.1.6296.101.52.3.1.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3IfInstanceControlAreaFlag 1.3.6.1.4.1.6296.101.52.3.1.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noArea(0), useArea(1)  

sleOspfv3IfInstanceControlAreaIndex 1.3.6.1.4.1.6296.101.52.3.1.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleOspfv3IfInstanceControlDeadInterval 1.3.6.1.4.1.6296.101.52.3.1.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleOspfv3IfInstanceControlHelloInterval 1.3.6.1.4.1.6296.101.52.3.1.2.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleOspfv3IfInstanceControlNetworkType 1.3.6.1.4.1.6296.101.52.3.1.2.13
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), p2p(1), broadcast(2), nbma(3), p2mp(4), p2mpNbma(5), virtualLink(6), loopback(7)  

sleOspfv3IfInstanceControlCost 1.3.6.1.4.1.6296.101.52.3.1.2.14
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..65535  

sleOspfv3IfInstanceControlTransDelay 1.3.6.1.4.1.6296.101.52.3.1.2.15
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleOspfv3IfInstanceControlRetransInterval 1.3.6.1.4.1.6296.101.52.3.1.2.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleOspfv3IfInstanceControlPriority 1.3.6.1.4.1.6296.101.52.3.1.2.17
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sleOspfv3IfInstanceControlBfd 1.3.6.1.4.1.6296.101.52.3.1.2.18
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), disable(1), enable(2)  

sleOspfv3IfInstanceControlEfm 1.3.6.1.4.1.6296.101.52.3.1.2.19
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), disable(1), enable(2)  

sleOspfv3IfInstanceNotifications 1.3.6.1.4.1.6296.101.52.3.1.3
OBJECT IDENTIFIER    

sleOspfv3IfInstanceChanged 1.3.6.1.4.1.6296.101.52.3.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3IfNeighbor 1.3.6.1.4.1.6296.101.52.3.2
OBJECT IDENTIFIER    

sleOspfv3IfNeighborTable 1.3.6.1.4.1.6296.101.52.3.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3IfNeighborEntry

sleOspfv3IfNeighborEntry 1.3.6.1.4.1.6296.101.52.3.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3IfNeighborEntry  

sleOspfv3IfNeighborAddress 1.3.6.1.4.1.6296.101.52.3.2.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3IfNeighborCost 1.3.6.1.4.1.6296.101.52.3.2.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleOspfv3IfNeighborPollIntervalFlag 1.3.6.1.4.1.6296.101.52.3.2.1.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noUse(0), use(1)  

sleOspfv3IfNeighborPollIntervalValue 1.3.6.1.4.1.6296.101.52.3.2.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sleOspfv3IfNeighborPriority 1.3.6.1.4.1.6296.101.52.3.2.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sleOspfv3ProcIfNeighborControl 1.3.6.1.4.1.6296.101.52.3.2.2
OBJECT IDENTIFIER    

sleOspfv3IfNeighborControlRequest 1.3.6.1.4.1.6296.101.52.3.2.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createOspfv3IfNeighbor(1), modifyOspfv3IfNeighbor(2), destroyOspfv3IfNeighbor(3)  

sleOspfv3IfNeighborControlStatus 1.3.6.1.4.1.6296.101.52.3.2.2.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlStatusType  

sleOspfv3IfNeighborControlTimer 1.3.6.1.4.1.6296.101.52.3.2.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleOspfv3IfNeighborControlTimeStamp 1.3.6.1.4.1.6296.101.52.3.2.2.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  TimeTicks  

sleOspfv3IfNeighborControlReqResult 1.3.6.1.4.1.6296.101.52.3.2.2.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlRequestResultType  

sleOspfv3IfNeighborControlIndex 1.3.6.1.4.1.6296.101.52.3.2.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4097  

sleOspfv3IfNeighborControlInstanceIndex 1.3.6.1.4.1.6296.101.52.3.2.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sleOspfv3IfNeighborControlAddress 1.3.6.1.4.1.6296.101.52.3.2.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3IfNeighborControlCost 1.3.6.1.4.1.6296.101.52.3.2.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..65535  

sleOspfv3IfNeighborControlPollIntervalFlag 1.3.6.1.4.1.6296.101.52.3.2.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noUse(0), use(1)  

sleOspfv3IfNeighborControlPollInterval 1.3.6.1.4.1.6296.101.52.3.2.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sleOspfv3IfNeighborControlPriority 1.3.6.1.4.1.6296.101.52.3.2.2.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..255  

sleOspfv3IfNeighborNotifications 1.3.6.1.4.1.6296.101.52.3.2.3
OBJECT IDENTIFIER    

sleOspfv3IfNeighborCreated 1.3.6.1.4.1.6296.101.52.3.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3IfNeighborModified 1.3.6.1.4.1.6296.101.52.3.2.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3IfNeighborDestroyed 1.3.6.1.4.1.6296.101.52.3.2.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleOspfv3IfStatus 1.3.6.1.4.1.6296.101.52.3.3
OBJECT IDENTIFIER    

sleOspfv3IfStatusTable 1.3.6.1.4.1.6296.101.52.3.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3IfStatusEntry

sleOspfv3IfStatusEntry 1.3.6.1.4.1.6296.101.52.3.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3IfStatusEntry  

sleOspfv3IfStatusProcTag 1.3.6.1.4.1.6296.101.52.3.3.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleOspfv3IfStatusAreaId 1.3.6.1.4.1.6296.101.52.3.3.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3IfStatusNetworkType 1.3.6.1.4.1.6296.101.52.3.3.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), p2p(1), broadcast(2), nbma(3), p2mp(4), p2mpNbma(5), virtualLink(6), loopback(7)  

sleOspfv3IfStatusCost 1.3.6.1.4.1.6296.101.52.3.3.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleOspfv3IfStatusTransDelay 1.3.6.1.4.1.6296.101.52.3.3.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleOspfv3IfStatusState 1.3.6.1.4.1.6296.101.52.3.3.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dependUpon(0), down(1), loopback(2), waiting(3), p2p(4), drOther(5), backup(6), dr(7)  

sleOspfv3IfStatusPriority 1.3.6.1.4.1.6296.101.52.3.3.1.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

sleOspfv3IfStatusDRRouterId 1.3.6.1.4.1.6296.101.52.3.3.1.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3IfStatusDRAddress 1.3.6.1.4.1.6296.101.52.3.3.1.1.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3IfStatusBackupRouterId 1.3.6.1.4.1.6296.101.52.3.3.1.1.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3IfStatusBackupAddress 1.3.6.1.4.1.6296.101.52.3.3.1.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3IfStatusHelloInterval 1.3.6.1.4.1.6296.101.52.3.3.1.1.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleOspfv3IfStatusDeadInterval 1.3.6.1.4.1.6296.101.52.3.3.1.1.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleOspfv3IfStatusWaitInterval 1.3.6.1.4.1.6296.101.52.3.3.1.1.14
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleOspfv3IfStatusRetransInterval 1.3.6.1.4.1.6296.101.52.3.3.1.1.15
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleOspfv3IfNeighborCount 1.3.6.1.4.1.6296.101.52.3.3.1.1.16
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleOspfv3IfAdjNeighborCount 1.3.6.1.4.1.6296.101.52.3.3.1.1.17
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleOspfv3Lsdb 1.3.6.1.4.1.6296.101.52.4
OBJECT IDENTIFIER    

sleOspfv3LsdbTable 1.3.6.1.4.1.6296.101.52.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3LsdbEntry

sleOspfv3LsdbEntry 1.3.6.1.4.1.6296.101.52.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3LsdbEntry  

sleOspfv3LsdbType 1.3.6.1.4.1.6296.101.52.4.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), router(1), network(2), interPrefix(3), interRouter(4), asExternal(5), groupMembership(6), nssa(7), link(8), intraPrefix(9)  

sleOspfv3LsdbLinkStateId 1.3.6.1.4.1.6296.101.52.4.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3LsdbAdvRouterId 1.3.6.1.4.1.6296.101.52.4.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3LsdbAge 1.3.6.1.4.1.6296.101.52.4.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleOspfv3LsdbSeqnum 1.3.6.1.4.1.6296.101.52.4.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleOspfv3LsdbLength 1.3.6.1.4.1.6296.101.52.4.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleOspfv3Neighbor 1.3.6.1.4.1.6296.101.52.5
OBJECT IDENTIFIER    

sleOspfv3NeigborTable 1.3.6.1.4.1.6296.101.52.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3NeigborEntry

sleOspfv3NeigborEntry 1.3.6.1.4.1.6296.101.52.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3NeigborEntry  

sleOspfv3NeighborIfType 1.3.6.1.4.1.6296.101.52.5.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), virtual(2)  

sleOspfv3NeighborIfIndex 1.3.6.1.4.1.6296.101.52.5.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4095  

sleOspfv3NeighborRouterId 1.3.6.1.4.1.6296.101.52.5.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3NeighborAddress 1.3.6.1.4.1.6296.101.52.5.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3NeighborAreaId 1.3.6.1.4.1.6296.101.52.5.1.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3NeighborIfName 1.3.6.1.4.1.6296.101.52.5.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sleOspfv3NeighborPriority 1.3.6.1.4.1.6296.101.52.5.1.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleOspfv3NeighborState 1.3.6.1.4.1.6296.101.52.5.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dependUpon(0), down(1), attempt(2), init(3), twoWay(4), exStart(5), exchange(6), loading(7), full(8)  

sleOspfv3NeighborInstanceId 1.3.6.1.4.1.6296.101.52.5.1.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleOspfv3NeighborDRRouterId 1.3.6.1.4.1.6296.101.52.5.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3NeighborBDRRouterId 1.3.6.1.4.1.6296.101.52.5.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3NeighborOption 1.3.6.1.4.1.6296.101.52.5.1.1.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  BITS forwarding(0), externalRouting(1), mcastForwarding(2), nssaLsa(3), anyProtocol(4), demand(5)  

sleOspfv3NeighborDeadTime 1.3.6.1.4.1.6296.101.52.5.1.1.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleOspfv3NeighborLsdbCount 1.3.6.1.4.1.6296.101.52.5.1.1.14
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleOspfv3NeighborLsreqCount 1.3.6.1.4.1.6296.101.52.5.1.1.15
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleOspfv3NeighborLsrxmitCount 1.3.6.1.4.1.6296.101.52.5.1.1.16
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleOspfv3Route 1.3.6.1.4.1.6296.101.52.6
OBJECT IDENTIFIER    

sleOspfv3RouteTable 1.3.6.1.4.1.6296.101.52.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleOspfv3RouteEntry

sleOspfv3RouteEntry 1.3.6.1.4.1.6296.101.52.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleOspfv3RouteEntry  

sleOspfv3RouteNetAddr 1.3.6.1.4.1.6296.101.52.6.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3RouteNetMask 1.3.6.1.4.1.6296.101.52.6.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

sleOspfv3RouteNexthop 1.3.6.1.4.1.6296.101.52.6.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleOspfv3RouteType 1.3.6.1.4.1.6296.101.52.6.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), connected(1), intra(2), inter(3), externE1(4), externE2(5), externN1(6), externN2(7), discard(8)  

sleOspfv3RouteMetric 1.3.6.1.4.1.6296.101.52.6.1.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sleOspfv3RouteIfName 1.3.6.1.4.1.6296.101.52.6.1.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sleOspfv3RouteAreaFlag 1.3.6.1.4.1.6296.101.52.6.1.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), upon(1), transit(2)  

sleOspfv3RouteAreaId 1.3.6.1.4.1.6296.101.52.6.1.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv4  

sleOspfv3Group 1.3.6.1.4.1.6296.101.52.7
Description.
Status: current Access: read-write
OBJECT-GROUP    

sleOspfv3NotificationGroup 1.3.6.1.4.1.6296.101.52.8
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor