SLE-CLOCK-MIB

File: SLE-CLOCK-MIB.mib (26251 bytes)

Imported modules

DASAN-SMI	SLE-TC-MIB	SNMPv2-CONF
SNMPv2-SMI	SNMPv2-TC

Imported symbols

sleMgmt	SleControlStatusType	SleControlRequestResultType
OBJECT-GROUP	NOTIFICATION-GROUP	TimeTicks
Gauge32	OBJECT-TYPE	MODULE-IDENTITY
NOTIFICATION-TYPE	TEXTUAL-CONVENTION

Defined Types

ClockSourceAll
clock source all
TEXTUAL-CONVENTION
	INTEGER	bitsa(1), bitsb(2), synce(3), ieee1588(7), gps10m(11), int(12)

ClockQualityLevel
QualityLevel - none, option1(prc,ssua,ssub,sec,dnu) option2gen1(prc,stu,st2,st3,smc,prov,dus) option2gen2(prc,stu,st2,tnc,st3e,st3,smc,prov,dus)
TEXTUAL-CONVENTION
	INTEGER	none(0), prc(1), ssua(2), ssub(3), sec(4), dnu(5), stu(7), st2(8), tnc(9), st3e(10), st3(11), smc(12), prov(13), dus(14)

ClockSourceSystem
clock source for system clock
TEXTUAL-CONVENTION
	INTEGER	bitsa(1), bitsb(2), synce(3), ieee1588(7), gps10m(11), int(12)

ClockQualityLevelValid
QualityLevel - option1(prc,ssua,ssub,sec,dnu) option2gen1(prc,stu,st2,st3,smc,prov,dus) option2gen2(prc,stu,st2,tnc,st3e,st3,smc,prov,dus)
TEXTUAL-CONVENTION
	INTEGER	prc(1), ssua(2), ssub(3), sec(4), dnu(5), stu(7), st2(8), tnc(9), st3e(10), st3(11), smc(12), prov(13), dus(14)

SleClockQlSetEntry
SEQUENCE
	sleClockQlSetSource	ClockSourceAll
	sleClockQlSetQulatyLevel	ClockQualityLevel

SleClockInputSourceEntry
SEQUENCE
	sleClockInputSourceSource	ClockSourceSystem
	sleClockInputSourceUse	INTEGER
	sleClockInputSourcePriority	INTEGER
	sleClockInputSourceIfName	OCTET STRING
	sleClockInputSourceConfQulatyLevel	ClockQualityLevel
	sleClockInputSourceRecvQulatyLevel	ClockQualityLevel
	sleClockInputSourceValid	INTEGER

Defined Values

sleClock		1.3.6.1.4.1.6296.101.92
This MIB contains information about Clock.
MODULE-IDENTITY

sleClockBaseMode		1.3.6.1.4.1.6296.101.92.1
OBJECT IDENTIFIER

sleClockBaseModeInfo		1.3.6.1.4.1.6296.101.92.1.1
OBJECT IDENTIFIER

sleClockSyncOption		1.3.6.1.4.1.6296.101.92.1.1.1
synchronization ssm option
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	option1(1), option2gen1(2), option2gen2(3)

sleClockSelectionMode		1.3.6.1.4.1.6296.101.92.1.1.2
best clock source select by qualityLevel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	qlEnable(1), qlDisable(2)

sleClockBaseModeControl		1.3.6.1.4.1.6296.101.92.1.2
OBJECT IDENTIFIER

sleClockModeControlRequest		1.3.6.1.4.1.6296.101.92.1.2.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setSyncOption(1), setSelectionMode(2)

sleClockModeControlStatus		1.3.6.1.4.1.6296.101.92.1.2.2
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleClockModeControlTimer		1.3.6.1.4.1.6296.101.92.1.2.3
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleClockModeControlTimeStamp		1.3.6.1.4.1.6296.101.92.1.2.4
Description.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleClockModeControlReqResult		1.3.6.1.4.1.6296.101.92.1.2.5
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleClockModeControlSyncOption		1.3.6.1.4.1.6296.101.92.1.2.6
synchronization ssm option.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	option1(1), option2gen1(2), option2gen2(3)

sleClockModeControlSelectionMode		1.3.6.1.4.1.6296.101.92.1.2.7
best clock source select by qualityLevel.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	qlEnable(1), qlDisable(2)

sleClockBaseModeNotification		1.3.6.1.4.1.6296.101.92.1.3
OBJECT IDENTIFIER

sleClockSyncOptionChanged		1.3.6.1.4.1.6296.101.92.1.3.1
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockSelectionModeChanged		1.3.6.1.4.1.6296.101.92.1.3.2
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockBits		1.3.6.1.4.1.6296.101.92.2
OBJECT IDENTIFIER

sleClockBitsInfo		1.3.6.1.4.1.6296.101.92.2.1
OBJECT IDENTIFIER

sleClockBitsType		1.3.6.1.4.1.6296.101.92.2.1.1
Bits interface type t1 or e1
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	t1(1), e1(2)

sleClockBitsFrameMode		1.3.6.1.4.1.6296.101.92.2.1.2
Bits frame mode T1(sf, esf) E1(g704).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sf(1), esf(2), g704(3)

sleClockBitsLineEncoding		1.3.6.1.4.1.6296.101.92.2.1.3
Bits Line Coding T1(b8zs, ami) E1(hdb3, ami).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	b8zs(1), ami(2), hdb3(3)

sleClockBitsControl		1.3.6.1.4.1.6296.101.92.2.2
OBJECT IDENTIFIER

sleClockBitsControlRequest		1.3.6.1.4.1.6296.101.92.2.2.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setBitsMode(1), setBitsLineEncoding(2)

sleClockBitsControlStatus		1.3.6.1.4.1.6296.101.92.2.2.2
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleClockBitsControlTimer		1.3.6.1.4.1.6296.101.92.2.2.3
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleClockBitsControlTimeStamp		1.3.6.1.4.1.6296.101.92.2.2.4
Description.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleClockBitsControlReqResult		1.3.6.1.4.1.6296.101.92.2.2.5
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleClockBitsControlType		1.3.6.1.4.1.6296.101.92.2.2.6
Bits interface type t1 or e1.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	t1(1), e1(2)

sleClockBitsControlFrameMode		1.3.6.1.4.1.6296.101.92.2.2.7
Bits frame mode T1(sf, esf) E1(g704).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	sf(1), esf(2), g704(3)

sleClockBitsControlLineEncoding		1.3.6.1.4.1.6296.101.92.2.2.8
Bits Line Coding T1(b8zs, ami) E1(hdb3, ami).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	b8zs(1), ami(2), hdb3(3)

sleClockBitsNotification		1.3.6.1.4.1.6296.101.92.2.3
OBJECT IDENTIFIER

sleClockBitsTypeChanged		1.3.6.1.4.1.6296.101.92.2.3.1
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockBitsLineEncodingChanged		1.3.6.1.4.1.6296.101.92.2.3.2
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockQlSet		1.3.6.1.4.1.6296.101.92.3
OBJECT IDENTIFIER

sleClockQlSetTable		1.3.6.1.4.1.6296.101.92.3.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleClockQlSetEntry

sleClockQlSetEntry		1.3.6.1.4.1.6296.101.92.3.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SleClockQlSetEntry

sleClockQlSetSource		1.3.6.1.4.1.6296.101.92.3.1.1.1
clock source.
Status: current	Access: read-only
OBJECT-TYPE
	ClockSourceAll

sleClockQlSetQulatyLevel		1.3.6.1.4.1.6296.101.92.3.1.1.2
QualityLevel.
Status: current	Access: read-only
OBJECT-TYPE
	ClockQualityLevel

sleClockQlSetControl		1.3.6.1.4.1.6296.101.92.3.2
OBJECT IDENTIFIER

sleClockQlSetControlRequest		1.3.6.1.4.1.6296.101.92.3.2.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setQualityLevel(1)

sleClockQlSetControlStatus		1.3.6.1.4.1.6296.101.92.3.2.2
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleClockQlSetControlTimer		1.3.6.1.4.1.6296.101.92.3.2.3
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleClockQlSetControlTimeStamp		1.3.6.1.4.1.6296.101.92.3.2.4
Description.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleClockQlSetControlReqResult		1.3.6.1.4.1.6296.101.92.3.2.5
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleClockQlSetControlSoruce		1.3.6.1.4.1.6296.101.92.3.2.6
Clock Source.
Status: current	Access: read-write
OBJECT-TYPE
	ClockSourceAll

sleClockQlSetControlQualityLevel		1.3.6.1.4.1.6296.101.92.3.2.7
QualityLevel.
Status: current	Access: read-write
OBJECT-TYPE
	ClockQualityLevel

sleClockQlNotification		1.3.6.1.4.1.6296.101.92.3.3
OBJECT IDENTIFIER

sleClockQlSetQualityLevelChanged		1.3.6.1.4.1.6296.101.92.3.3.1
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockSelected		1.3.6.1.4.1.6296.101.92.4
OBJECT IDENTIFIER

sleClockSelectedInfo		1.3.6.1.4.1.6296.101.92.4.1
OBJECT IDENTIFIER

sleClockSelectedSource		1.3.6.1.4.1.6296.101.92.4.1.1
Selected Clock Source.
Status: current	Access: read-only
OBJECT-TYPE
	ClockSourceSystem

sleClockSelectedState		1.3.6.1.4.1.6296.101.92.4.1.2
Clock operate status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	freerun(1), holdover(2), locked(3)

sleClockSelectedQualityLevel		1.3.6.1.4.1.6296.101.92.4.1.3
current Selected QualityLevel.
Status: current	Access: read-only
OBJECT-TYPE
	ClockQualityLevel

sleClockSelectedSwitchType		1.3.6.1.4.1.6296.101.92.4.1.4
switch type, .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	clear(0), force(1), man(2), auto(3)

sleClockSelectedControl		1.3.6.1.4.1.6296.101.92.4.2
OBJECT IDENTIFIER

sleClockSelectedControlRequest		1.3.6.1.4.1.6296.101.92.4.2.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setSwitchClear(1), setSwitchMan(2)

sleClockSelectedControlStatus		1.3.6.1.4.1.6296.101.92.4.2.2
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleClockSelectedControlTimer		1.3.6.1.4.1.6296.101.92.4.2.3
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleClockSelectedControlTimeStamp		1.3.6.1.4.1.6296.101.92.4.2.4
Description.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleClockSelectedControlReqResult		1.3.6.1.4.1.6296.101.92.4.2.5
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleClockSelectedControlDestSource		1.3.6.1.4.1.6296.101.92.4.2.6
Description.
Status: current	Access: read-write
OBJECT-TYPE
	ClockSourceSystem

sleClockSelectedNotification		1.3.6.1.4.1.6296.101.92.4.3
OBJECT IDENTIFIER

sleClockSwitchManChanged		1.3.6.1.4.1.6296.101.92.4.3.1
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockSwitchClearChanged		1.3.6.1.4.1.6296.101.92.4.3.2
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockInputSource		1.3.6.1.4.1.6296.101.92.5
OBJECT IDENTIFIER

sleClockInputSourceTable		1.3.6.1.4.1.6296.101.92.5.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleClockInputSourceEntry

sleClockInputSourceEntry		1.3.6.1.4.1.6296.101.92.5.1.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SleClockInputSourceEntry

sleClockInputSourceSource		1.3.6.1.4.1.6296.101.92.5.1.1.1
Description.
Status: current	Access: read-only
OBJECT-TYPE
	ClockSourceSystem

sleClockInputSourceUse		1.3.6.1.4.1.6296.101.92.5.1.1.2
Description.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

sleClockInputSourcePriority		1.3.6.1.4.1.6296.101.92.5.1.1.3
1 is the highest priority, 255 is the lowest priority
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

sleClockInputSourceIfName		1.3.6.1.4.1.6296.101.92.5.1.1.4
only valid clock source synce1~synce4, sdh1 ~ sdh3.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleClockInputSourceConfQulatyLevel		1.3.6.1.4.1.6296.101.92.5.1.1.5
Description.
Status: current	Access: read-only
OBJECT-TYPE
	ClockQualityLevel

sleClockInputSourceRecvQulatyLevel		1.3.6.1.4.1.6296.101.92.5.1.1.6
Description.
Status: current	Access: read-only
OBJECT-TYPE
	ClockQualityLevel

sleClockInputSourceValid		1.3.6.1.4.1.6296.101.92.5.1.1.7
Description.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(0), valid(1)

sleClockInputSourceControl		1.3.6.1.4.1.6296.101.92.5.2
OBJECT IDENTIFIER

sleClockInputSourceControlRequest		1.3.6.1.4.1.6296.101.92.5.2.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setUseOn(1), setUseOff(2), setPriority(3), setIfName(4)

sleClockInputSourceControlStatus		1.3.6.1.4.1.6296.101.92.5.2.2
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleClockInputSourceControlTimer		1.3.6.1.4.1.6296.101.92.5.2.3
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleClockInputSourceControlTimeStamp		1.3.6.1.4.1.6296.101.92.5.2.4
Description.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleClockInputSourceControlReqResult		1.3.6.1.4.1.6296.101.92.5.2.5
Description.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleClockInputSourceControlSource		1.3.6.1.4.1.6296.101.92.5.2.6
Description.
Status: current	Access: read-write
OBJECT-TYPE
	ClockSourceSystem

sleClockInputSourceControlPriority		1.3.6.1.4.1.6296.101.92.5.2.7
1 is the highest priority, 255 is the lowest priority.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

sleClockInputSourceControlIfName		1.3.6.1.4.1.6296.101.92.5.2.8
only valid clock source synce1~synce4, sdh1 ~ sdh3.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleClockInputSourceNotification		1.3.6.1.4.1.6296.101.92.5.3
OBJECT IDENTIFIER

sleClockInputSourceUseOnChanged		1.3.6.1.4.1.6296.101.92.5.3.1
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockInputSourceUseOffChanged		1.3.6.1.4.1.6296.101.92.5.3.2
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockInputSourcePriorityChanged		1.3.6.1.4.1.6296.101.92.5.3.3
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockInputSourceIfNameChanged		1.3.6.1.4.1.6296.101.92.5.3.4
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleClockObjectGroup		1.3.6.1.4.1.6296.101.92.29
Description.
Status: current	Access: read-write
OBJECT-GROUP

sleClockNotificationGroup		1.3.6.1.4.1.6296.101.92.30
Description.
Status: current	Access: read-write
NOTIFICATION-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor