SLE-BRIDGE-MIB

Imported modules

DASAN-SMI	IANA-ADDRESS-FAMILY-NUMBERS-MIB	IF-MIB
INET-ADDRESS-MIB	SLE-TC-MIB	SNMPv2-CONF
SNMPv2-SMI	SNMPv2-TC

Imported symbols

sleMgmt	AddressFamilyNumbers	InterfaceIndex
InetAddressIPv6	SleControlStatusType	SleControlRequestResultType
OBJECT-GROUP	NOTIFICATION-GROUP	TimeTicks
IpAddress	Integer32	Unsigned32
Gauge32	Counter32	Counter64
OBJECT-TYPE	MODULE-IDENTITY	NOTIFICATION-TYPE
TruthValue	TimeStamp	MacAddress

Defined Types

SleIgmpConfControlRequestType
INTEGER	setIgmpConfProfile(1)

SleIgmpMcastControlRequestType
INTEGER	createIgmpStaticMcast(1), destroyIgmpStaticMcast(2)

Boolean
INTEGER	disable(0), enable(1)

SleLldpManAddrIfSubType
INTEGER	unknown(1), ifIndex(2), systemPortNumber(3)

SleLldpSysCapType
BITS	other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7)

SleBridgePortEntry
SEQUENCE
	sleBridgePortIndex	INTEGER
	sleBridgePortIfIndex	INTEGER
	sleBridgePortPVid	INTEGER
	sleBridgePortMaxHosts	INTEGER
	sleBridgePortCurrentHosts	INTEGER
	sleBridgePortMaxLearnPerUnit	INTEGER
	sleBridgePortMACFilterPermission	INTEGER
	sleBridgePortIngMirrorStatus	INTEGER
	sleBridgePortEgMirrorStatus	INTEGER
	sleBridgePortBcastThreshold	INTEGER
	sleBridgePortMcastThreshold	INTEGER
	sleBridgePortDlfThreshold	INTEGER
	sleBridgePortQinQStatus	INTEGER
	sleBridgePortAdminLinktype	INTEGER
	sleBridgePortAdminEdgemode	INTEGER
	sleBridgePortOperLinktype	INTEGER
	sleBridgePortOperEdgemode	INTEGER
	sleBridgePortStpBpduFilter	INTEGER
	sleBridgePortPvlanIsolatedStatus	INTEGER
	sleBridgePortPvlanPromPorts	OCTET STRING
	sleBridgePortDhcpFilterServer	INTEGER
	sleBridgePortLoopDetectStatus	INTEGER
	sleBridgePortLoopDetectBlock	INTEGER
	sleBridgePortLoopDetectPeriod	INTEGER
	sleBridgePortLoopDetectTimer	INTEGER
	sleBridgePortLoopDetectBlockStatus	INTEGER
	sleBridgePortNetBIOSFilter	INTEGER
	sleBridgePortPushInnertag	INTEGER
	sleBridgePortPopInnertag	INTEGER
	sleBridgePortInnertag	INTEGER
	sleBridgePortPriority	INTEGER
	sleBridgePortInner2outerPri	INTEGER
	sleBridgePortInner2outerVid	INTEGER
	sleBridgePortLinkUpCnt	INTEGER
	sleBridgePortLinkDownCnt	INTEGER
	sleBridgePortLinkUpTime	Counter64
	sleBridgePortElapsedTimeAfterClearStats	Counter64
	sleBridgePortMACLearningStatus	INTEGER
	sleBridgePortPortBridgeStatus	INTEGER
	sleBridgePortUnknownMcastBlock	INTEGER
	sleBridgePortDescription	OCTET STRING
	sleBridgePortHoldTime	Integer32
	sleBridgePortMacAntiSpoofing	TruthValue
	sleBridgePortSwitchType	INTEGER
	sleBridgePortSwitchState	INTEGER
	sleBridgePortSwitchMode	INTEGER
	sleBridgePortSwitchSubMode	INTEGER
	sleBridgePortSwitchDefaultVlan	Integer32
	sleBridgePortSwitchIngressFilter	INTEGER
	sleBridgePortSwitchAccFrameType	BITS
	sleBridgePortSwitchNativeVid	Integer32
	sleBridgePortSwitchAllowedVlan	OCTET STRING
	sleBridgePortSwitchAllowedVlanEtag	OCTET STRING
	sleBridgePortSwitchChannelType	INTEGER
	sleBridgePortSwitchStaticChannelGroup	OCTET STRING
	sleBridgePortSwitchChannelLoadbalance	INTEGER
	sleBridgePortSwitchAggrType	INTEGER
	sleBridgePortSwitchAggrId	Integer32
	sleBridgePortSwitchAggrMode	INTEGER
	sleBridgePortLoopDetectPeriodMs	INTEGER
	sleBridgePortLoopDetectAdminCount	Integer32
	sleBridgePortLoopDetectOperCount	Integer32
	sleBridgePortLoopDetectDetectedCount	Integer32
	sleBridgePortLoopDetectVlan	Integer32
	sleBridgePortMaxNewHosts	Integer32
	sleBridgePortStpStatus	INTEGER
	sleBridgePortStpBpduGuard	INTEGER
	sleBridgePortOuterTpid	Integer32
	sleBridgePortMirrorMonitor	INTEGER
	sleBridgePortBandwidth	OCTET STRING
	sleBridgePortAlias	OCTET STRING
	sleBridgePortMulticast	INTEGER
	sleBridgePortFloodBlock	BITS

SleVlanEntry
SEQUENCE
	sleVlanIndex	INTEGER
	sleVlanIfIndex	Integer32
	sleVlanName	OCTET STRING
	sleVlanStatus	INTEGER
	sleVlanEgressPorts	OCTET STRING
	sleVlanUnTaggedPorts	OCTET STRING
	sleVlanCreationTime	TimeTicks
	sleVlanAgeingTime	INTEGER
	sleVlanTagTxCounter	Counter64
	sleVlanDescription	OCTET STRING
	sleVlanElineEnable	INTEGER
	sleVlanOperStatus	INTEGER
	sleVlanMtu	Integer32
	sleVlanType	INTEGER

SleServiceVlanEntry
SEQUENCE
	sleServiceVlanIndex	INTEGER
	sleServiceVlanName	OCTET STRING
	sleServiceVlanDescription	OCTET STRING
	sleServiceVlanOperStatus	INTEGER
	sleServiceVlanMtu	Integer32
	sleServiceVlanStatus	INTEGER
	sleServiceVlanType	INTEGER
	sleServiceVlanSeviceType	INTEGER

SleVlanMapEntry
SEQUENCE
	sleVlanMapFid	Unsigned32
	sleVlanMapStpId	Unsigned32
	sleVlanMapErpDomainId	Unsigned32

SleStpInstanceEntry
SEQUENCE
	sleStpInstanceIndex	INTEGER
	sleStpInstanceEnable	INTEGER
	sleStpInstancePriority	Integer32
	sleStpInstanceRootBridgeId	OCTET STRING
	sleStpInstanceRootPathcost	Integer32
	sleStpInstanceDesignatedBridgeId	OCTET STRING
	sleStpInstanceDesignatedPortId	INTEGER
	sleStpInstanceRootPortId	INTEGER
	sleStpInstanceFwdDelay	INTEGER
	sleStpInstanceHelloTime	INTEGER
	sleStpInstanceMaxAge	INTEGER
	sleStpInstanceRemainHops	Integer32
	sleStpInstanceBrFwdDelay	INTEGER
	sleStpInstanceBrHelloTime	INTEGER
	sleStpInstanceBrMaxAge	INTEGER

SleStpInstancePortEntry
SEQUENCE
	sleStpInstancePortIndex	InterfaceIndex
	sleStpInstancePortPathcost	INTEGER
	sleStpInstancePortPriority	INTEGER
	sleStpInstancePortRole	INTEGER
	sleStpInstancePortState	INTEGER
	sleStpInstancePortRootBridgeId	OCTET STRING
	sleStpInstancePortRootPathcost	Integer32
	sleStpInstancePortDesignateBridgeId	OCTET STRING
	sleStpInstancePortDesignatePortId	INTEGER
	sleStpInstancePortRootGuardMode	INTEGER

SleSubnetVlanEntry
SEQUENCE
	sleSubnetVlanIp	IpAddress
	sleSubnetVlanMask	Integer32
	sleSubnetVlanVid	Integer32

SleProtocolVlanEntry
SEQUENCE
	sleProtocolVlanEtype	Unsigned32
	sleProtocolVlanVid	Integer32

SleLagEntry
SEQUENCE
	sleLagIndex	Integer32
	sleLagPortId	InterfaceIndex
	sleLagDistMode	INTEGER
	sleLagPortMap	OCTET STRING
	sleLagMode	INTEGER
	sleLagLeastActive	Integer32

SleLagLacpEntry
SEQUENCE
	sleLagLacpIndex	Integer32
	sleLagLacpActorAggregatorKey	Integer32
	sleLagLacpActorSystemMAC	OCTET STRING
	sleLagLacpPartnerSystemMAC	OCTET STRING
	sleLagLacpPartnerSystemPriority	Integer32
	sleLagLacpPartnerAggregatorKey	Integer32

SleLagLacpPortEntry
SEQUENCE
	sleLagLacpPortIndex	InterfaceIndex
	sleLagLacpPortActivity	INTEGER
	sleLagLacpPortActorPriority	INTEGER
	sleLagLacpPortActorAggregatorId	Integer32
	sleLagLacpPortActorAdminKey	INTEGER
	sleLagLacpPortActorAdminState	BITS
	sleLagLacpPortActorOperKey	Integer32
	sleLagLacpPortActorOperState	BITS
	sleLagLacpPortPartnerAdminSystemMAC	OCTET STRING
	sleLagLacpPortPartnerAdminSystemPriority	Integer32
	sleLagLacpPortPartnerAdminKey	Integer32
	sleLagLacpPortPartnerAdminNum	InterfaceIndex
	sleLagLacpPortPartnerAdminPriority	Integer32
	sleLagLacpPortPartnerAdminState	BITS
	sleLagLacpPortPartnerOperSystemMAC	OCTET STRING
	sleLagLacpPortPartnerOperSystemPriority	Integer32
	sleLagLacpPortPartnerOperKey	Integer32
	sleLagLacpPortPartnerOperNum	InterfaceIndex
	sleLagLacpPortPartnerOperPriority	Integer32
	sleLagLacpPortPartnerOperState	BITS
	sleLagLacpPortActorAdminAggregatorId	Integer32

SleFdbEntry
SEQUENCE
	sleFdbEntryFid	INTEGER
	sleFdbEntryPort	INTEGER
	sleFdbEntryMacAddress	OCTET STRING
	sleFdbEntryVid	INTEGER
	sleFdbEntryMode	INTEGER
	sleFdbEntryPermission	INTEGER
	sleFdbEntryElapsedTime	Unsigned32

SleMfdbOldEntry
SEQUENCE
	sleMfdbOldMacAddress	OCTET STRING
	sleMfdbOldEntryPermission	INTEGER
	sleMfdbOldVlanIndex	INTEGER
	sleMfdbOldPorts	OCTET STRING

SleIgmpConfEntry
SEQUENCE
	sleIgmpConfVlanIndex	Integer32
	sleIgmpConfEnable	INTEGER
	sleIgmpConfMulticastFilter	INTEGER
	sleIgmpConfOutmostVlan	INTEGER
	sleIgmpConfSnoopEnable	INTEGER
	sleIgmpConfSnoopJoinDelay	Integer32
	sleIgmpConfSnoopQueryDelay	Integer32
	sleIgmpConfSnoopMrouter	Integer32
	sleIgmpConfSnoopFastLeave	INTEGER
	sleIgmpConfSnoopQuerier	INTEGER

SleIgmpMcastEntry
SEQUENCE
	sleIgmpMcastVlanIndex	Integer32
	sleIgmpMcastIPAddress	IpAddress
	sleIgmpMcastPortIndex	Integer32
	sleIgmpMcastType	INTEGER
	sleIgmpMcastExpireTime	Integer32

SleStackDeviceEntry
SEQUENCE
	sleStackDeviceMacAddress	OCTET STRING
	sleStackDeviceNodeId	Integer32
	sleStackDeviceDescriptor	OCTET STRING
	sleStackDeviceMode	INTEGER
	sleStackDeviceStatus	INTEGER
	sleStackDeviceType	OCTET STRING
	sleStackDeviceHostName	OCTET STRING
	sleStackDevicePortNum	INTEGER

SleErpDomainEntry
SEQUENCE
	sleErpDomainIndex	INTEGER
	sleErpDomainName	OCTET STRING
	sleErpDomainPrimaryPort	InterfaceIndex
	sleErpDomainSecondaryPort	InterfaceIndex
	sleErpDomainBridgeRole	INTEGER
	sleErpDomainProtectionActivation	INTEGER
	sleErpDomainOperatorRequest	INTEGER
	sleErpDomainWaitToRestoreTime	INTEGER
	sleErpDomainTestPacketInterval	INTEGER
	sleErpDomainLearningDisabledTime	INTEGER
	sleErpDomainNodeStatus	INTEGER
	sleErpDomainRingStatus	INTEGER
	sleErpDomainLotp	INTEGER
	sleErpDomainULotp	INTEGER
	sleErpDomainMultipleRM	INTEGER
	sleErpDomainRMNodeReacheablility	INTEGER
	sleErpDomainHoldOffTime	INTEGER
	sleErpDomainRingPriority	INTEGER

SleLldpPortEntry
SEQUENCE
	sleLldpPortIndex	INTEGER
	sleLldpPortActivity	Boolean
	sleLldpPortAdminStatus	INTEGER
	sleLldpPortNotificationEnable	Boolean
	sleLldpPortTLVsTxEnable	BITS
	sleLldpPortMgmtTxEnable	Boolean
	sleLldpPortMgmtAddress	IpAddress
	sleLldpPortTLVsTxNetworkPolciyProfile	OCTET STRING
	sleLldpPortMgmtIPType	Integer32
	sleLldpPortMgmtIPAddress	IpAddress

SleLldpRemoteEntry
SEQUENCE
	sleLldpRemIndex	Integer32
	sleLldpRemTimeMark	TimeTicks
	sleLldpRemChassisIdSubtype	INTEGER
	sleLldpRemChassisId	OCTET STRING
	sleLldpRemPortIdSubtype	INTEGER
	sleLldpRemPortId	OCTET STRING
	sleLldpRemPortDesc	OCTET STRING
	sleLldpRemSysName	OCTET STRING
	sleLldpRemSysDesc	OCTET STRING
	sleLldpRemSysCapSupported	BITS
	sleLldpRemSysCapEnabled	BITS

SleLldpRemoteManAddrEntry
SEQUENCE
	sleLldpRemManAddrSubType	AddressFamilyNumbers
	sleLldpRemManAddr	OCTET STRING
	sleLldpRemManAddrIfSubType	SleLldpManAddrIfSubType
	sleLldpRemManAddrIfId	Integer32
	sleLldpRemAddrOid	OBJECT IDENTIFIER

SleLldpStatisticsEntry
SEQUENCE
	sleLldpStatsTxPortFramesTotal	Integer32
	sleLldpStatsRxPortFramesDiscardedTotal	Counter32
	sleLldpStatsRxPortFramesErrors	Integer32
	sleLldpStatsRxPortFramesTotal	Counter32
	sleLldpStatsRxPortTLVsDiscardedTotal	Integer32
	sleLldpStatsRxPortTLVsUnrecognizedTotal	Integer32
	sleLldpStatsRxPortAgeoutsTotal	Counter32

SleBridgePSEntry
SEQUENCE
	sleBridgePSIndex	InterfaceIndex
	sleBridgePSStatus	INTEGER
	sleBridgePSMaxCount	INTEGER
	sleBridgePSCurrCount	Unsigned32
	sleBridgePSAgingType	INTEGER
	sleBridgePSAgingTimer	INTEGER
	sleBridgePSAgingStatic	INTEGER
	sleBridgePSViolation	INTEGER

SleBridgePSFdbEntry
SEQUENCE
	sleBridgePSFdbPort	INTEGER
	sleBridgePSFdbVid	INTEGER
	sleBridgePSFdbMacAddress	OCTET STRING
	sleBridgePSFdbMode	INTEGER
	sleBridgePSFdbElapsedTime	Unsigned32

SleBridgeFGPortEntry
SEQUENCE
	sleBridgeFGPortType	INTEGER
	sleBridgeFGPortFrameType	INTEGER
	sleBridgeFGPortFrame	INTEGER
	sleBridgeFGPortBlocked	INTEGER
	sleBridgeFGPortTimer	INTEGER

SleBridgeVTEntry
SEQUENCE
	sleBridgeVTServiceId	INTEGER
	sleBridgeVTSubscriberId	INTEGER

SleBridgeVTRuleEntry
SEQUENCE
	sleBridgeVTRuleMac	MacAddress
	sleBridgeVTRuleVid	INTEGER
	sleBridgeVTRuleRDirVid	INTEGER
	sleBridgeVTRuleRDirPort	Integer32
	sleBridgeVTRuleStatus	INTEGER

SleBridgeInBoundVTEntry
SEQUENCE
	sleBridgeInBoundVTPortIndex	INTEGER
	sleBridgeInBoundVTVlanIndex	Integer32
	sleBridgeInBoundVTNewVid	Integer32
	sleBridgeInBoundVTOperStatus	INTEGER

SleBridgeOutBoundVTEntry
SEQUENCE
	sleBridgeOutBoundVTPortIndex	INTEGER
	sleBridgeOutBoundVTVlanIndex	Integer32
	sleBridgeOutBoundVTNewVid	Integer32
	sleBridgeOutBoundVTOperStatus	INTEGER

SleBridgeGarpAppPortEntry
SEQUENCE
	sleBridgeGarpAppPortIndex	INTEGER
	sleBridgeGarpAppPortType	INTEGER
	sleBridgeGarpAppPortStatus	INTEGER
	sleBridgeGarpAppPortFailedRegistrations	Integer32
	sleBridgeGarpAppPortLastPduOrigin	OCTET STRING
	sleBridgeGarpAppPortRegistration	INTEGER
	sleBridgeGarpAppPortApplicant	INTEGER
	sleBridgeGarpAppPortFwdAll	INTEGER
	sleBridgeGarpAppPortTimerJoin	Integer32
	sleBridgeGarpAppPortTimerLeave	Integer32
	sleBridgeGarpAppPortTimerLeaveAll	Integer32

SleBridgeGarpStatsEntry
SEQUENCE
	sleBridgeGarpStatsJoinEmptyReceived	Integer32
	sleBridgeGarpStatsJoinInReceived	Integer32
	sleBridgeGarpStatsEmptyReceived	Integer32
	sleBridgeGarpStatsLeaveInReceived	Integer32
	sleBridgeGarpStatsLeaveEmptyReceived	Integer32
	sleBridgeGarpStatsLeaveAllReceived	Integer32
	sleBridgeGarpStatsJoinEmptyTransmitted	Integer32
	sleBridgeGarpStatsJoinInTransmitted	Integer32
	sleBridgeGarpStatsEmptyTransmitted	Integer32
	sleBridgeGarpStatsLeaveInTransmitted	Integer32
	sleBridgeGarpStatsLeaveEmptyTransmitted	Integer32
	sleBridgeGarpStatsLeaveAllTransmitted	Integer32

SleBridgeGmrpStaticEntry
SEQUENCE
	sleBridgeGmrpStaticVid	INTEGER
	sleBridgeGmrpStaticPort	INTEGER
	sleBridgeGmrpStaticGmac	OCTET STRING

SleVlanInboundTagEntry
SEQUENCE
	sleVlanInboundTagPortIndex	INTEGER
	sleVlanInboundTagVlanIndex	INTEGER
	sleVlanInboundTagOuterVid	INTEGER
	sleVlanInboundTagOperStatus	INTEGER
	sleVlanInboundTagVlanPriority	INTEGER
	sleVlanInboundTagOuterVlanPriority	INTEGER

SleVlanOutboundTagEntry
SEQUENCE
	sleVlanOutboundTagPortIndex	INTEGER
	sleVlanOutboundTagVlanIndex	INTEGER
	sleVlanOutboundTagOperStatus	INTEGER

SleVlanRangeInboundTagEntry
SEQUENCE
	sleVlanRangeInboundTagPortIndex	Integer32
	sleVlanRangeInboundTagMinVlanIndex	Integer32
	sleVlanRangeInboundTagMaxVlanIndex	Integer32
	sleVlanRangeInboundTagOuterVid	Integer32
	sleVlanRangeInboundTagOperStatus	INTEGER

SleVlanProtoIdEntry
SEQUENCE
	sleVlanProtoIdVid	Integer32
	sleVlanProtoIdOuterProtoId	INTEGER

SleVlanMappingEntry
SEQUENCE
	sleVlanMappingIndex	INTEGER
	sleVlanMappingPortId	INTEGER
	sleVlanMappingOriVlanId	INTEGER
	sleVlanMappingTransVlanId	INTEGER
	sleVlanMappingMode	INTEGER
	sleVlanMappingMatchCos	Integer32
	sleVlanMappingMatchDscp	Integer32
	sleVlanMappingMatchEthType	INTEGER
	sleVlanMappingMatchIPPrecedence	Integer32
	sleVlanMappingMatchTos	Integer32
	sleVlanMappingRateLimit	INTEGER
	sleVlanMappingCos	Integer32
	sleVlanMappingDscp	Integer32

SlePowerInlineEntry
SEQUENCE
	slePowerInlinePortIndex	INTEGER
	slePowerInlineAdminStatus	INTEGER
	slePowerInlinePortStatus	INTEGER
	slePowerInlineDetectionStatus	INTEGER
	slePowerInlinePortClass	INTEGER
	slePowerInlinePortMaxPow	INTEGER
	slePowerInlinePortLegacy	INTEGER
	slePowerInlinePortPriority	INTEGER
	slePowerInlinePortPower	OCTET STRING
	slePowerInlinePortCurrent	OCTET STRING
	slePowerInlinePortVoltage	OCTET STRING
	slePowerInlinePortTemperture	OCTET STRING

SleMfdbEntry
SEQUENCE
	sleMfdbMacAddress	OCTET STRING
	sleMfdbEntryPermission	INTEGER
	sleMfdbVlanIndex	INTEGER
	sleMfdbPorts	OCTET STRING

SleLldpMedNetworkPolicyProfileEntry
SEQUENCE
	sleLldpMedNetworkPolicyProfileIndex	Integer32
	sleLldpMedNetworkPolicyProfileName	OCTET STRING

SleLldpMedNetworkPolicyProfilePolicyEntry
SEQUENCE
	sleLldpMedNetworkPolicyProfilePolicyAppType	INTEGER
	sleLldpMedNetworkPolicyProfilePolicyVlanId	Integer32
	sleLldpMedNetworkPolicyProfilePolicyPriority	Integer32
	sleLldpMedNetworkPolicyProfilePolicyDscp	Integer32
	sleLldpMedNetworkPolicyProfilePolicyUnknown	Boolean

SleLldpMedRemoteNetworkPolicyEntry
SEQUENCE
	sleLldpMedRemoteNetworkPolicyAppType	INTEGER
	sleLldpMedRemoteNetworkPolicyVlanId	Integer32
	sleLldpMedRemoteNetworkPolicyPriority	Integer32
	sleLldpMedRemoteNetworkPolicyDscp	Integer32
	sleLldpMedRemoteNetworkPolicyUnknown	Boolean
	sleLldpMedRemoteNetworkPolicyTagged	Boolean

SleLldpMedRemoteLocationEntry
SEQUENCE
	sleLldpMedRemoteLocationSubType	INTEGER
	sleLldpMedRemoteLocationInfo	OCTET STRING

SleLldpMedRemoteInventoryEntry
SEQUENCE
	sleLldpMedRemoteHardwareRev	OCTET STRING
	sleLldpMedRemoteFirmwareWRev	OCTET STRING
	sleLldpMedRemoteSoftwareRev	OCTET STRING
	sleLldpMedRemoteSerialNum	OCTET STRING
	sleLldpMedRemoteMfgName	OCTET STRING
	sleLldpMedRemoteModelName	OCTET STRING
	sleLldpMedRemoteAssetID	OCTET STRING

SleBridgeInterfaceEntry
SEQUENCE
	sleBridgeInterfaceIndex	Integer32
	sleBridgeInterfaceName	OCTET STRING
	sleBridgeInterfaceType	INTEGER
	sleBridgeInterfaceMode	INTEGER
	sleBridgeInterfaceDefaultVlan	Integer32
	sleBridgeInterfacePvid	Integer32
	sleBridgeInterfaceIngressFilter	INTEGER
	sleBridgeInterfaceAllowedVlanFlags	INTEGER
	sleBridgeInterfaceAllowedVlan	OCTET STRING
	sleBridgeInterfaceNativeVlan	Integer32
	sleBridgeInterfaceChannelGroupAggrId	Integer32
	sleBridgeInterfaceChannelGroupMode	INTEGER
	sleBridgeInterfaceChannelGroupState	INTEGER
	sleBridgeInterfaceChannelGroupLacpAggrMode	INTEGER
	sleBridgeInterfaceChannelGroupAdminKey	Integer32
	sleBridgeInterfaceChannelGroupAggrType	INTEGER
	sleBridgeInterfaceChannelGroupPriority	Integer32
	sleBridgeInterfaceChannelGroupTimeOut	INTEGER
	sleBridgeInterfaceChannelGroupActiveLink	Integer32
	sleBridgeInterfaceChannelGroupDistMode	INTEGER
	sleBridgeInterfaceSubMode	INTEGER
	sleBridgeInterfaceAcceptableFramType	INTEGER
	sleBridgeInterfaceEgressTagged	OCTET STRING
	sleBridgeInterfaceVlanTranslation	OCTET STRING
	sleBridgeInterfaceCVlanRegistraionName	OCTET STRING
	sleBridgeInterfacePEVlanId	OCTET STRING
	sleBridgeInterfacePEDefaultVlanId	OCTET STRING
	sleBridgeInterfacePEUntaggedVlanId	OCTET STRING
	sleBridgeInterfaceDefaulSVlanId	Integer32
	sleBridgeInterfacePrivateVlanHostAssociationPrimaryVid	Integer32
	sleBridgeInterfacePrivateVlanHostAssociationPvid	Integer32
	sleBridgeInterfacePrivateVlanMappingPvid	Integer32
	sleBridgeInterfacePrivateVlanMappingSecondaryVid	Integer32
	sleBridgeInterfaceGroup	Integer32
	sleBridgeInterfaceGroupSpanningTree	Integer32
	sleBridgeInterfaceProviderNetworkEtherType	INTEGER

SleBridgeReservedVlanEntry
SEQUENCE
	sleBridgeReservedVlanId	Integer32
	sleBridgeReservedVlanIsUsed	INTEGER

SleBridgeInternalVlanEntry
SEQUENCE
	sleBridgeInternalVlanSlot	Integer32
	sleBridgeInternalVlanPort	Integer32
	sleBridgeInternalVlanRealVlanId	Integer32
	sleBridgeInternalVlanInternalVlanId	Integer32

SleSubnetVlan6Entry
SEQUENCE
	sleSubnetVlan6Ip	InetAddressIPv6
	sleSubnetVlan6Mask	Integer32
	sleSubnetVlan6Vid	Integer32

Sle2MacAddressEntry
SEQUENCE
	sle2MacAddressEntryBridgeId	INTEGER
	sle2MacAddressEntryMacAddress	MacAddress
	sle2MacAddressEntryIfIndex	Integer32
	sle2MacAddressEntryVid	INTEGER
	sle2MacAddressEntrySVid	INTEGER
	sle2MacAddressEntryMode	INTEGER
	sle2MacAddressEntryPermission	INTEGER
	sle2MacAddressEntryElapsedTime	Unsigned32

SleCVlanRegistrationMapEntry
SEQUENCE
	sleCVlanRegIndex	INTEGER
	sleCVlanIndex	Integer32
	sleCVlanRegName	OCTET STRING
	sleSVlan	Integer32
	sleUntaggedMap	Integer32

SleLacpInterfaceEntry
SEQUENCE
	sleLacpInterfaceIndex	InterfaceIndex
	sleLacpInterfaceName	OCTET STRING
	sleLacpInterfaceActorPriority	Integer32
	sleLacpInterfaceActorAdminKey	Integer32
	sleLacpInterfaceActorAdminState	BITS
	sleLacpInterfaceDestinationMac	INTEGER
	sleLacpInterfaceDiscardWrongConversation	INTEGER
	sleLacpInterfaceTimeout	INTEGER
	sleLacpInterfaceActiveLink	Integer32

Sle2LldpGlobalEntry
SEQUENCE
	sle2LldpGlobalIfIndex	InterfaceIndex
	sle2LldpGlobalAgtCircuitId	OCTET STRING
	sle2LldpGlobalMedDevType	INTEGER
	sle2LldpGlobalPortDescription	OCTET STRING

Sle2LldpParametersEntry
SEQUENCE
	sle2LldpParamIfIndex	InterfaceIndex
	sle2LldpParamAgentMode	INTEGER
	sle2LldpParamBacManagementAddress	INTEGER
	sle2LldpParamBacPortDescription	INTEGER
	sle2LldpParamBacSystemCapabilities	INTEGER
	sle2LldpParamBacSystemDescription	INTEGER
	sle2LldpParamBacSystemName	INTEGER
	sle2LldpParamI8021LinkAgg	INTEGER
	sle2LldpParamI8021MgmtVid	INTEGER
	sle2LldpParamI8021PortPtclVlanid	INTEGER
	sle2LldpParamI8021PortVlanid	INTEGER
	sle2LldpParamI8021PtclIdentity	INTEGER
	sle2LldpParamI8021VidDigest	INTEGER
	sle2LldpParamI8021VlanName	INTEGER
	sle2LldpParamI8023MacPhy	INTEGER
	sle2LldpParamI8023MaxMtuSize	INTEGER
	sle2LldpParamMedInventory	INTEGER
	sle2LldpParamMedLocation	INTEGER
	sle2LldpParamMedNetworkPolicy	INTEGER
	sle2LldpParamMedPower	INTEGER

Sle2LldpAgentEntry
SEQUENCE
	sle2LldpAgentIfIndex	InterfaceIndex
	sle2LldpAgentMode	INTEGER
	sle2LldpAgentChassisIdTlv	INTEGER
	sle2LldpAgentAdminStatus	INTEGER
	sle2LldpAgentLocallyAssigned	OCTET STRING
	sle2LldpAgentManagementAddressTlv	INTEGER
	sle2LldpAgentMsgTxHold	Integer32
	sle2LldpAgentPortIdTlv	INTEGER
	sle2LldpAgentTimerMsgFastTx	Integer32
	sle2LldpAgentTimerMsgTxInterval	Integer32
	sle2LldpAgentTimerReinitDelay	Integer32
	sle2LldpAgentTimerTxDelay	Integer32
	sle2LldpAgentTMNlimit	Integer32
	sle2LldpAgentTMNInfoType	INTEGER
	sle2LldpAgentTMNMac	MacAddress
	sle2LldpAgentTMNTimer	Integer32
	sle2LldpAgentTxFastInit	Integer32
	sle2LldpAgentTxMaxCredit	Integer32

Sle2LldpStatisticsEntry
SEQUENCE
	sle2LldpStatsIfIndex	InterfaceIndex
	sle2LldpStatsAgentMode	INTEGER
	sle2LldpStatsTransmittedFramesTotal	Integer32
	sle2LldpStatsAgedEntriesTotal	Integer32
	sle2LldpStatsReceivedFramesTotal	Integer32
	sle2LldpStatsReceivedFramesError	Integer32
	sle2LldpStatsDiscardedFramesTotal	Integer32
	sle2LldpStatsTLVDiscardTotal	Integer32
	sle2LldpStatsTLVUnrecognisedTotal	Integer32

Sle2LldpRemoteEntry
SEQUENCE
	sle2LldpRemoteIfIndex	InterfaceIndex
	sle2LldpRemoteAgentMode	INTEGER
	sle2LldpRemoteSysName	OCTET STRING
	sle2LldpRemoteSysDescr	OCTET STRING
	sle2LldpRemotePortDescr	OCTET STRING
	sle2LldpRemoteRxTtl	Integer32
	sle2LldpRemoteSysCapability	OCTET STRING
	sle2LldpRemoteIfNumbering	Integer32
	sle2LldpRemoteIfNumber	Integer32
	sle2LldpRemoteOid	OCTET STRING
	sle2LldpRemoteMgmtAddrSubType	INTEGER
	sle2LldpRemoteMgmtAddr	OCTET STRING
	sle2LldpRemoteChassisIdType	INTEGER
	sle2LldpRemoteChassisId	OCTET STRING
	sle2LldpRemotePortIdType	INTEGER
	sle2LldpRemotePortId	OCTET STRING
	sle2LldpRemotePortVlanId	Integer32
	sle2LldpRemotePPVlanId	Integer32
	sle2LldpRemoteProtocols	BITS
	sle2LldpRemoteVidUsageDigest	Integer32
	sle2LldpRemoteMgmtVlan	Integer32
	sle2LldpRemoteLinkAggrStatus	INTEGER
	sle2LldpRemoteLinkAggrPortId	Integer32
	sle2LldpRemoteAutonegoSupport	BITS
	sle2LldpRemoteAutonegoCapability	Integer32
	sle2LldpRemoteOperMauType	Integer32
	sle2LldpRemoteMaxFrameSize	Integer32
	sle2LldpRemoteMedCapability	BITS
	sle2LldpRemoteMedCapabilityDevType	OCTET STRING
	sle2LldpRemoteMedNwPlcyAppType	OCTET STRING
	sle2LldpRemoteMedNwPlcyVlanId	Integer32
	sle2LldpRemoteMedNwPlcyTagged	INTEGER
	sle2LldpRemoteMedNwPlcyL2Prio	Integer32
	sle2LldpRemoteMedNwPlcyDscp	Integer32
	sle2LldpRemoteMedLocDataFormat	OCTET STRING
	sle2LldpRemoteMedLocLatitudeRes	Integer32
	sle2LldpRemoteMedLocLatitude	Counter64
	sle2LldpRemoteMedLocLongitudeRes	Integer32
	sle2LldpRemoteMedLocLongitude	Counter64
	sle2LldpRemoteMedLocAt	Integer32
	sle2LldpRemoteMedLocAltitudeRes	Integer32
	sle2LldpRemoteMedLocAltitude	Integer32
	sle2LldpRemoteMedLocDatum	Integer32
	sle2LldpRemoteMedLocLciLength	Integer32
	sle2LldpRemoteMedLocWhat	Integer32
	sle2LldpRemoteMedLocCountryCode	Integer32
	sle2LldpRemoteMedLocCaType	Integer32
	sle2LldpRemoteMedLocCaLen	Integer32

Sle2LldpRemoteVlanEntry
SEQUENCE
	sle2LldpRemoteVlanIfIndex	InterfaceIndex
	sle2LldpRemoteVlanAgentMode	INTEGER
	sle2LldpRemoteVlanId	Integer32
	sle2LldpRemoteVlanName	OCTET STRING

Defined Values

sleBridge		1.3.6.1.4.1.6296.101.3
This MIB contains all needed informations about bridgePorts and all supported sle bridgeing features.
MODULE-IDENTITY

sleBridgeBase		1.3.6.1.4.1.6296.101.3.1
OBJECT IDENTIFIER

sleBridgeBaseInfo		1.3.6.1.4.1.6296.101.3.1.1
OBJECT IDENTIFIER

sleBridgeMacAddress		1.3.6.1.4.1.6296.101.3.1.1.1
System MAC Address of bridge
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

sleBridgePortNum		1.3.6.1.4.1.6296.101.3.1.1.2
Number of bridge ports
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..256

sleBridgeLagMaxId		1.3.6.1.4.1.6296.101.3.1.1.3
This value assigned to the aggregation max id.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..14

sleBridgeLacpActivity		1.3.6.1.4.1.6296.101.3.1.1.4
The LACP enabled/disabled status of the switch
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sleBridgeLacpPriority		1.3.6.1.4.1.6296.101.3.1.1.5
The priority assigned to the Actor System
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

sleBridgeVlanSupportMode		1.3.6.1.4.1.6296.101.3.1.1.6
The supported VLAN mode for ingress untagged frame
Status: current	Access: read-only
OBJECT-TYPE
	BITS	portbased(0), protocolbased(1), subnetbased(2)

sleBridgeVlanMaxNum		1.3.6.1.4.1.6296.101.3.1.1.7
sleBridgeVlanMaxNum
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..4096

sleBridgeDoubleTagProtoId		1.3.6.1.4.1.6296.101.3.1.1.8
programmable Double Tag Protocol Identifier. It means outerTPID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dtag8100(33024), dtag9100(37120)

sleBridgeMirrorMode		1.3.6.1.4.1.6296.101.3.1.1.9
Mirror mode of bridge
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sleBridgeMirrorMonitorPortId		1.3.6.1.4.1.6296.101.3.1.1.10
Mirroring port ID 1-254: physical port ID 255: mirror to cpu
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

sleBridgeMirroredIngressPorts		1.3.6.1.4.1.6296.101.3.1.1.11
Ingress mirrored port map
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleBridgeMirroredEgressPorts		1.3.6.1.4.1.6296.101.3.1.1.12
Egress mirrored port map
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleBridgeMaxLearnPerUnit		1.3.6.1.4.1.6296.101.3.1.1.13
Limit maximum number of MAC addresses learning newly per unit time(one second) on a bridge. (0: nothing learned, -l: unlimited.)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-1..2147483647

sleBridgeFdbAgeingTime		1.3.6.1.4.1.6296.101.3.1.1.14
The timeout period in seconds for aging out dynamically learned forwarding information.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	10..21474830

sleBridgeFdbMaxEntries		1.3.6.1.4.1.6296.101.3.1.1.15
The supported maximum fdb entries.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgeFdbCurrentEntries		1.3.6.1.4.1.6296.101.3.1.1.16
Number of Fdb entries learned currently.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgeStackMode		1.3.6.1.4.1.6296.101.3.1.1.17
Stack status of device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), master(1), slave(2)

sleBridgeStackDeviceName		1.3.6.1.4.1.6296.101.3.1.1.18
Device name of stack device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..8)

sleBridgeStackNodeId		1.3.6.1.4.1.6296.101.3.1.1.19
Node ID of stack device
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65534

sleBridgeLldpMessageTxInterval		1.3.6.1.4.1.6296.101.3.1.1.20
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..32768

sleBridgeLldpTxHoldMultiplier		1.3.6.1.4.1.6296.101.3.1.1.21
The time-to-live value expressed as a multiple of the sleBridgeLldpMessageTxInterval object.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..10

sleBridgeLldpReinitDelay		1.3.6.1.4.1.6296.101.3.1.1.22
Delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

sleBridgeLldpTxDelay		1.3.6.1.4.1.6296.101.3.1.1.23
Delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..8192

sleBridgeLldpNotificationInterval		1.3.6.1.4.1.6296.101.3.1.1.24
The agent must not generate more than one lldpRemTablesChangenotification-event in the indicated period.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..3600

sleBridgeLldpStatsRemTablesLastChangeTime		1.3.6.1.4.1.6296.101.3.1.1.25
The value of sysUpTime object (defined in IETF RFC 3418)at the time an entry is created, modified, or deleted in thein tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleBridgeLldpStatsRemTablesInserts		1.3.6.1.4.1.6296.101.3.1.1.26
The number of times the complete set of informationadvertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgeLldpStatsRemTablesDeletes		1.3.6.1.4.1.6296.101.3.1.1.27
The number of times the complete set of informationadvertised by a particular MSAP has been deleted fromtables contained in lldpRemoteSystemsData and lldpExtensions objects.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgeLldpStatsRemTablesDrops		1.3.6.1.4.1.6296.101.3.1.1.28
The number of times the complete set of information advertised by a particular MSAP could not be entered intotables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgeLldpStatsRemTablesAgeouts		1.3.6.1.4.1.6296.101.3.1.1.29
The number of times the complete set of informationadvertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objectsbecause the information timeliness interval has expired.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgeLldpLocalChassisIdSubtype		1.3.6.1.4.1.6296.101.3.1.1.30
The type of encoding used to identify the chassis associated with the local system.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7)

sleBridgeLldpLocalChassisId		1.3.6.1.4.1.6296.101.3.1.1.31
The string value used to identify the chassis component associated with the local system.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..255)

sleBridgeLldpLocalSysName		1.3.6.1.4.1.6296.101.3.1.1.32
The string value used to identify the system name of the local system.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

sleBridgeLldpLocalSysDes		1.3.6.1.4.1.6296.101.3.1.1.33
The string value used to identify the system description of the local system.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..255)

sleBridgeLldpLocalSysCapSupported		1.3.6.1.4.1.6296.101.3.1.1.34
The bitmap value used to identify which system capabilities are supported on the local system.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7)

sleBridgeLldpLocalSysCapEnabled		1.3.6.1.4.1.6296.101.3.1.1.35
The bitmap value used to identify which system capabilities are enabled on the local system.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7)

sleBridgeStpActivity		1.3.6.1.4.1.6296.101.3.1.1.36
The STP enabled/disabled status of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sleBridgeStpSelfLoop		1.3.6.1.4.1.6296.101.3.1.1.37
The STP self loop 0: disabled 1: enabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePvlanOnePromPortEnable		1.3.6.1.4.1.6296.101.3.1.1.38
The value used to identify that a isolated port can be associated with only one or entire promiscuous ports on the local system.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgeTcpSyncookie		1.3.6.1.4.1.6296.101.3.1.1.39
The value permits only when transmitted cookies are returned after sending cookies with SYN
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgeTcpIgnoreRstUnknown		1.3.6.1.4.1.6296.101.3.1.1.40
The value configures not to send the message that informs TCP connection cannot be done.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgeAutoInterfaceActivation		1.3.6.1.4.1.6296.101.3.1.1.41
The value configures auto Interface activation. (supported only model 5924N)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeLoopDetectStatus		1.3.6.1.4.1.6296.101.3.1.1.42
The global adminStatus of Loop-Detect.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeLoopDetectPacketType		1.3.6.1.4.1.6296.101.3.1.1.43
The type of srcmac to be detected. 1.laa : Locally Administered Address 2.system : System MAC (default)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	laa(1), system(2)

sleBridgePvlanPromSelectMode		1.3.6.1.4.1.6296.101.3.1.1.44
The value is used to indicate promiscuous ports selection mode: normal odefault manual o by user stp o by STP (not supported) erp o by ERP
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), manual(1), stp(2), erp(3)

sleBridgePvlanPromiscuousPorts		1.3.6.1.4.1.6296.101.3.1.1.45
Bitmap of promiscuous ports on bridge.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgeInnerTagProtoId		1.3.6.1.4.1.6296.101.3.1.1.46
programmable Inner Double Tag Protocol Identifier. It means innerTPID
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dtag8100(33024), dtag9100(37120)

sleBridgeUnknownMcastBlockAllPorts		1.3.6.1.4.1.6296.101.3.1.1.47
Unknown multicast block setting for all ports.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeEcmpHashType		1.3.6.1.4.1.6296.101.3.1.1.48
ECMP Hash Type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sip(1), sipDip(2)

sleBridgeTcpSynguard		1.3.6.1.4.1.6296.101.3.1.1.49
The tcp-synguard bandwidth.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..2147483647

sleBridgeOuterTagProtoId		1.3.6.1.4.1.6296.101.3.1.1.50
programmable outer Double Tag Protocol Identifier. It means OutTPID
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dtag8100(33024), dtag9100(37120)

sleBridgeMacAntiSpoofing		1.3.6.1.4.1.6296.101.3.1.1.51
The protect uplink mac address
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeMacReplace		1.3.6.1.4.1.6296.101.3.1.1.52
The mac address replace mode
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeStormControlBcast		1.3.6.1.4.1.6296.101.3.1.1.53
The Storm Control Broadcast Configuration 0: disable bcast
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..65535

sleBridgeStormControlDLF		1.3.6.1.4.1.6296.101.3.1.1.54
The Storm Control DLF Configuration 0: disable DLF
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..65535

sleBridgeStormControlMulticast		1.3.6.1.4.1.6296.101.3.1.1.55
The Storm Control MultiCast Configuration 0: disable multicast
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..65535

sleBridgeMacLearningMode		1.3.6.1.4.1.6296.101.3.1.1.56
The MAC Learning Mode. 1: cml 2: sml 3: cmlsml
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	cml(1), sml(2), cmlsml(3)

sleBridgeLagGlobalDistMode		1.3.6.1.4.1.6296.101.3.1.1.57
The LAG global distmode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), srcmac(1), dstmac(2), srcdstmac(3), srcip(4), dstip(5), srcdstip(6), srcdstl4(7), label(8)

sleBridgeMultiPortLlcfPortA		1.3.6.1.4.1.6296.101.3.1.1.58
The Multi port LLCF - RAPS East/West Port.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgeMultiPortLlcfPortB		1.3.6.1.4.1.6296.101.3.1.1.59
The Multi port LLCF - RAPS East/West Port.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgeMultiPortLlcfUpPortC		1.3.6.1.4.1.6296.101.3.1.1.60
The Multi port LLCF - force down ports
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgeMultiPortLlcfDownPortC		1.3.6.1.4.1.6296.101.3.1.1.61
The Multi port LLCF - force down ports
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgeMultiPortLlcfPortAStatus		1.3.6.1.4.1.6296.101.3.1.1.62
The Multi port LLCF port's status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), loc(1), disable(2), forcedToDown(3)

sleBridgeMultiPortLlcfPortBStatus		1.3.6.1.4.1.6296.101.3.1.1.63
The Multi port LLCF port's status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), loc(1), disable(2), forcedToDown(3)

sleBridgeMultiPortLlcfUpPortCStatus		1.3.6.1.4.1.6296.101.3.1.1.64
The Multi port LLCF port's status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), loc(1), disable(2), forcedToDown(3)

sleBridgeMultiPortLlcfDownPortCStatus		1.3.6.1.4.1.6296.101.3.1.1.65
The Multi port LLCF port's status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), loc(1), disable(2), forcedToDown(3)

sleBridgeMultiPortLlcfTimer		1.3.6.1.4.1.6296.101.3.1.1.66
The LLCF's checking interval. 1000~10000ms (default: 2500ms)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1000..10000

sleBridgeChannelGroupLacpMaxBundle		1.3.6.1.4.1.6296.101.3.1.1.67
The channel group LACP max bundle (range 1..8)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..8

sleBridgeChannelGroupSystemPriority		1.3.6.1.4.1.6296.101.3.1.1.68
The channel group system priority (default:32768)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

sleBridgeId		1.3.6.1.4.1.6296.101.3.1.1.69
The object is display bridgeId
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..32

sleBridgeProtocol		1.3.6.1.4.1.6296.101.3.1.1.70
This object to display the bridge Protocol
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), enableBridgeProtocolIeee(1), enableBridgeProtocolIeeeVlan(2), enableBridgeProtocolProviderMstp(3), enableBridgeProtocolProviderMstpEdge(4)

sleBridgeBaseControl		1.3.6.1.4.1.6296.101.3.1.2
OBJECT IDENTIFIER

sleBridgeControlRequest		1.3.6.1.4.1.6296.101.3.1.2.1
The request of a user command
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setLacpProfile(1), setDoubleTagProtoId(2), setMirrorProfile(3), setMaxLearnPerUnit(4), setFdbAgeingTime(5), setStackProfile(6), setLldpProfile(7), setStpProfile(8), setTcpSyncookie(9), setTcpIgnoreRstUnknown(10), setAutoInterfaceActivation(11), setLoopDetectProfile(12), setPvlanPromSelectMode(13), setInnerTagProtoId(14), setUnknownMcastBlockAllPorts(15), setEcmpHashType(16), setTcpSynguard(17), setOuterTagProtoId(18), setMacAntiSpoofing(19), setMacReplace(20), setStormControl(21), setMacLearningMode(22), setLagGlobalDistMode(23), setMultiPortLlcf(24), delMultiPortLlcf(25), setMultiPortLlcfTimer(26), setChannelGroupLacpMaxBundle(27), delChannelGroupLacpMaxBundle(28), setChannelGroupSystemPriority(29), delChannelGroupSystemPriority(30), setBridgeProtocol(31), unsetBridgeProtocol(32)

sleBridgeControlStatus		1.3.6.1.4.1.6296.101.3.1.2.2
The status of user command
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleBridgeControlTimer		1.3.6.1.4.1.6296.101.3.1.2.3
The maximum time for the manager for a long running user command
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleBridgeControlTimeStamp		1.3.6.1.4.1.6296.101.3.1.2.4
The time stamp of the last command(end of command)
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleBridgeControlReqResult		1.3.6.1.4.1.6296.101.3.1.2.5
The result of the last user command
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleBridgeControlLacpActivity		1.3.6.1.4.1.6296.101.3.1.2.6
The LACP enabled/disabled status of the switch
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sleBridgeControlLacpPriority		1.3.6.1.4.1.6296.101.3.1.2.7
The priority assigned to the Actor System
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

sleBridgeControlDoubleTagProtoId		1.3.6.1.4.1.6296.101.3.1.2.8
programmable Double Tag Protocol Identifier. It means outerTPID.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

sleBridgeControlMirrorMode		1.3.6.1.4.1.6296.101.3.1.2.9
Mirror mode of bridge
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sleBridgeControlMirrorMonitorPortId		1.3.6.1.4.1.6296.101.3.1.2.10
Mirroring port ID 1-254: physical port ID 255: mirror to cpu
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

sleBridgeControlMaxLearnPerUnit		1.3.6.1.4.1.6296.101.3.1.2.11
Limit maximum number of MAC addresses learning newly per unit time(one second) on a bridge. (0: nothing learned, -l: unlimited.)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-1..2147483647

sleBridgeControlFdbAgeingTime		1.3.6.1.4.1.6296.101.3.1.2.12
The timeout period in seconds for aging out dynamically learned forwarding information.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	10..21474830

sleBridgeControlStackMode		1.3.6.1.4.1.6296.101.3.1.2.13
Stack status of device.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), master(1), slave(2)

sleBridgeControlStackDeviceName		1.3.6.1.4.1.6296.101.3.1.2.14
Device name of stack device.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..8)

sleBridgeControlLldpMessageTxInterval		1.3.6.1.4.1.6296.101.3.1.2.15
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..32767

sleBridgeControlLldpTxHoldMultiplier		1.3.6.1.4.1.6296.101.3.1.2.16
The time-to-live value expressed as a multiple of the sleBridgeLldpMessageTxInterval object.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	2..10

sleBridgeControlLldpReinitDelay		1.3.6.1.4.1.6296.101.3.1.2.17
Delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

sleBridgeControlLldpTxDelay		1.3.6.1.4.1.6296.101.3.1.2.18
Delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..8192

sleBridgeControlLldpNotificationInterval		1.3.6.1.4.1.6296.101.3.1.2.19
The agent must not generate more than one lldpRemTablesChangenotification-event in the indicated period.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..3600

sleBridgeControlStpActivity		1.3.6.1.4.1.6296.101.3.1.2.20
The STP enabled/disabled status of the switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sleBridgeControlStpSelfLoop		1.3.6.1.4.1.6296.101.3.1.2.21
The STP self loop 0: disabled 1: enabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgeControlTcpSyncookie		1.3.6.1.4.1.6296.101.3.1.2.22
The value permits only when transmitted cookies are returned after sending cookies with SYN
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgeControlTcpIgnoreRstUnknown		1.3.6.1.4.1.6296.101.3.1.2.23
The value configures not to send the message that informs TCP connection cannot be done.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgeControlAutoInterfaceActivation		1.3.6.1.4.1.6296.101.3.1.2.24
The value configures auto Interface activation. (supported only model 5924N)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeControlLoopDetectStatus		1.3.6.1.4.1.6296.101.3.1.2.25
The global adminStatus of Loop-Detect.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeControlLoopDetectPacketType		1.3.6.1.4.1.6296.101.3.1.2.26
The type of srcmac to be detected. 1.laa : Locally Administered Address 2.system : System MAC (default)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	laa(1), system(2)

sleBridgeControlPvlanPromSelectMode		1.3.6.1.4.1.6296.101.3.1.2.27
The value is used to indicate promiscuous ports selection mode: normal odefault manual o by user stp o by STP (not supported) erp o by ERP
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(0), manual(1), stp(2), erp(3)

sleBridgeControlPvlanPromiscuousPorts		1.3.6.1.4.1.6296.101.3.1.2.28
Valid if only if sleBridgeControlPvlanPromSelectMode is not manual. If sleBridgePvlanOnePromPortEnable is enabled, then it can only indicate one port or none.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgeControlInnerTagProtoId		1.3.6.1.4.1.6296.101.3.1.2.29
programmable Inner Double Tag Protocol Identifier. It means innerTPID.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dtag8100(33024), dtag9100(37120)

sleBridgeControlUnknownMcastBlockAllPorts		1.3.6.1.4.1.6296.101.3.1.2.30
Unknown multicast block setting for all ports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeControlEcmpHashType		1.3.6.1.4.1.6296.101.3.1.2.31
ECMP Hash Type
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	sip(1), sipDip(2)

sleBridgeControlTcpSynguard		1.3.6.1.4.1.6296.101.3.1.2.32
The tcp-synguard bandwidth.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2147483647

sleBridgeControlOuterTagProtoId		1.3.6.1.4.1.6296.101.3.1.2.33
programmable outer Double Tag Protocol Identifier. It means OutTPID
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dtag8100(33024), dtag9100(37120)

sleBridgeControlMacAntiSpoofing		1.3.6.1.4.1.6296.101.3.1.2.34
The protect uplink mac address 2011/01/20 V5924CR supports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeControlMacReplace		1.3.6.1.4.1.6296.101.3.1.2.35
The mac address replace mode 2011/01/20 V5924CR supports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgeControlStormControlBcast		1.3.6.1.4.1.6296.101.3.1.2.36
The Storm Control Broadcast Configuration 0: disable bcast
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 1..65535

sleBridgeControlStormControlDLF		1.3.6.1.4.1.6296.101.3.1.2.37
The Storm Control DLF Configuration 0: disable DLF
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 1..65535

sleBridgeControlStormControlMulticast		1.3.6.1.4.1.6296.101.3.1.2.38
The Storm Control Multicast Configuration 0: disable multicast
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..65535

sleBridgeControlMacLearningMode		1.3.6.1.4.1.6296.101.3.1.2.39
The MAC Learning Mode. 1: cml 2: sml 3: cmlsml
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cml(1), sml(2), cmlsml(3)

sleBridgeControlLagGlobalDistMode		1.3.6.1.4.1.6296.101.3.1.2.40
The LAG global distmode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), srcmac(1), dstmac(2), srcdstmac(3), srcip(4), dstip(5), srcdstip(6), srcdstl4(7), label(8)

sleBridgeControlMultiPortLlcfPortA		1.3.6.1.4.1.6296.101.3.1.2.41
The Multi port LLCF - RAPS East/West Port.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgeControlMultiPortLlcfPortB		1.3.6.1.4.1.6296.101.3.1.2.42
The Multi port LLCF - RAPS East/West Port.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgeControlMultiPortLlcfPortC		1.3.6.1.4.1.6296.101.3.1.2.43
The Multi port LLCF - force down ports
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgeControlMultiPortLlcfTimer		1.3.6.1.4.1.6296.101.3.1.2.44
The LLCF's checking interval. 1000~10000ms (default:2500ms) clear set value is -1.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1 \| 1000..10000

sleBridgeControlChannelGroupLacpMaxBundle		1.3.6.1.4.1.6296.101.3.1.2.45
The channel group LACP max bundle (range 1..8)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..8

sleBridgeControlChannelGroupSystemPriority		1.3.6.1.4.1.6296.101.3.1.2.46
The channel group system priority (default:32768)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

sleBridgeControlId		1.3.6.1.4.1.6296.101.3.1.2.47
This object is used to set the bridgeid
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..32

sleBridgeControlProtocol		1.3.6.1.4.1.6296.101.3.1.2.48
This object to display the bridge Protocol
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enableBridgeProtocolIeee(1), enableBridgeProtocolIeeeVlan(2), enableBridgeProtocolProviderMstp(3), enableBridgeProtocolProviderMstpEdge(4)

sleBridgeBaseNotification		1.3.6.1.4.1.6296.101.3.1.3
OBJECT IDENTIFIER

sleBridgeLacpProfileChanged		1.3.6.1.4.1.6296.101.3.1.3.1

Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeDoubleTagProtoIdChanged		1.3.6.1.4.1.6296.101.3.1.3.2

Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMirrorProfileChanged		1.3.6.1.4.1.6296.101.3.1.3.3

Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMaxLearnPerUnitChanged		1.3.6.1.4.1.6296.101.3.1.3.4
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeFdbAgeingTimeChanged		1.3.6.1.4.1.6296.101.3.1.3.5
Changed Fdb ageding time.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeStackProfileChanged		1.3.6.1.4.1.6296.101.3.1.3.6
Changed Stack device's profile.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeLldpProfileChanged		1.3.6.1.4.1.6296.101.3.1.3.7

Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeStpProfileChanged		1.3.6.1.4.1.6296.101.3.1.3.8

Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeTcpSyncookieChanged		1.3.6.1.4.1.6296.101.3.1.3.9
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeTcpIgnoreRstUnknownChanged		1.3.6.1.4.1.6296.101.3.1.3.10
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeAutoInterfaceActivationChanged		1.3.6.1.4.1.6296.101.3.1.3.11
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeLoopDetectProfileChanged		1.3.6.1.4.1.6296.101.3.1.3.12
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgePvlanPormSelectModeChanged		1.3.6.1.4.1.6296.101.3.1.3.13
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeInnerTagProtoIdChanged		1.3.6.1.4.1.6296.101.3.1.3.14
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeUnknownMcastBlockAllPortsChanged		1.3.6.1.4.1.6296.101.3.1.3.15
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeEcmpHashTypeChanged		1.3.6.1.4.1.6296.101.3.1.3.16
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeTcpSynguardChanged		1.3.6.1.4.1.6296.101.3.1.3.17
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeOuterTagProtoIdChanged		1.3.6.1.4.1.6296.101.3.1.3.18
sleBridgeControlOuterTagProtoId
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMacAntiSpoofingChanged		1.3.6.1.4.1.6296.101.3.1.3.19
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMacReplaceChanged		1.3.6.1.4.1.6296.101.3.1.3.20
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeStormControlChanged		1.3.6.1.4.1.6296.101.3.1.3.21
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMacLearningModeChanged		1.3.6.1.4.1.6296.101.3.1.3.22
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeLagGlobalDistModeChanged		1.3.6.1.4.1.6296.101.3.1.3.23
setLagGlobalDistMode
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMultiPortLlcfChanged		1.3.6.1.4.1.6296.101.3.1.3.24
setMultiPortLlcf
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMultiPortLlcfDeleted		1.3.6.1.4.1.6296.101.3.1.3.25
delMultiPortLlcf
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeMultiPortLlcfTimerChanged		1.3.6.1.4.1.6296.101.3.1.3.26
setMultiPortLlcfTimer
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeChannelGroupLacpMaxBundleChanged		1.3.6.1.4.1.6296.101.3.1.3.27
setChannelGroupLacpMaxBundle
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeChannelGroupLacpMaxBundleDeleted		1.3.6.1.4.1.6296.101.3.1.3.28
delChannelGroupLacpMaxBundle
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeChannelGroupSystemPriorityChanged		1.3.6.1.4.1.6296.101.3.1.3.29
setChannelGroupSystemPriority
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgeChannelGroupSystemPriorityDeleted		1.3.6.1.4.1.6296.101.3.1.3.30
delChannelGroupSystemPriority
Status: current	Access: read-only
NOTIFICATION-TYPE

sleBridgePort		1.3.6.1.4.1.6296.101.3.2
OBJECT IDENTIFIER

sleBridgePortTable		1.3.6.1.4.1.6296.101.3.2.1
Bridge Port Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleBridgePortEntry

sleBridgePortEntry		1.3.6.1.4.1.6296.101.3.2.1.1
Bridge Port Entry key: sleBridgePortIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleBridgePortEntry

sleBridgePortIndex		1.3.6.1.4.1.6296.101.3.2.1.1.1
Same as ifIndex (for all ifTable entries), additionally aggregation group index values available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

sleBridgePortIfIndex		1.3.6.1.4.1.6296.101.3.2.1.1.2
Bridge Interface Index.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4094

sleBridgePortPVid		1.3.6.1.4.1.6296.101.3.2.1.1.3
The PVID of port. Taken if no other rule given for VLAN association. If aggregated: only for group.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4094

sleBridgePortMaxHosts		1.3.6.1.4.1.6296.101.3.2.1.1.4
The maximum number of hosts allowed. Aggregation group available. Value 0 is allowed. Default value is -1: it means unlimited.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2147483647

sleBridgePortCurrentHosts		1.3.6.1.4.1.6296.101.3.2.1.1.5
The number hosts which is allowed to be used. Aggregation group available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

sleBridgePortMaxLearnPerUnit		1.3.6.1.4.1.6296.101.3.2.1.1.6
Limit maximum number of MAC addresses learning newly per unit time(one second) on a port. (0: nothing learned, -l: unlimited.)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-1..2147483647

sleBridgePortMACFilterPermission		1.3.6.1.4.1.6296.101.3.2.1.1.7
The default permission for mac filtering. Valid only for physical ports, use values from MFDB Table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	deny(0), permit(1)

sleBridgePortIngMirrorStatus		1.3.6.1.4.1.6296.101.3.2.1.1.8
Mirroring on ingress packets. Valid only for physical ports.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortEgMirrorStatus		1.3.6.1.4.1.6296.101.3.2.1.1.9
Mirroring on egress packets. Valid only for physical ports.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortBcastThreshold		1.3.6.1.4.1.6296.101.3.2.1.1.10
Broadcast packet rate limit(unit: packets/s), Valid only for physical ports. Default value is 0: it means BCSC clear-state. Value Range: 0-262142(TX/FX),0-2097150(GBIC).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2097150

sleBridgePortMcastThreshold		1.3.6.1.4.1.6296.101.3.2.1.1.11
Multicast packet rate limit.(unit: packets/s), Valid only for physical ports. Default value is 0: it means BCSC clear-state. Value Range: 0-262142(TX/FX),0-2097150(GBIC).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2097150

sleBridgePortDlfThreshold		1.3.6.1.4.1.6296.101.3.2.1.1.12
DLF packet rate limit(unit: packets/s), Valid only for physical ports. Default value is 0: it means BCSC clear-state. Value Range: 0-262142(TX/FX),0-2097150(GBIC).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2097150

sleBridgePortQinQStatus		1.3.6.1.4.1.6296.101.3.2.1.1.13
QinQ Status of the port. Valid only for physical ports.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortAdminLinktype		1.3.6.1.4.1.6296.101.3.2.1.1.14
The administrative link-type of port on the xSTP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	shared(0), pointTopoint(1), automatic(2)

sleBridgePortAdminEdgemode		1.3.6.1.4.1.6296.101.3.2.1.1.15
The administrative edgemode of port on the xSTP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortOperLinktype		1.3.6.1.4.1.6296.101.3.2.1.1.16
The link-type of the port on the xSTP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	shared(0), pointTopoint(1)

sleBridgePortOperEdgemode		1.3.6.1.4.1.6296.101.3.2.1.1.17
The edge-mode of the port on the xSTP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sleBridgePortStpBpduFilter		1.3.6.1.4.1.6296.101.3.2.1.1.18
The stp bpdu-filter of the port on the xSTP. Default value is 0.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortPvlanIsolatedStatus		1.3.6.1.4.1.6296.101.3.2.1.1.19
Isolated status of this port. Default value is disable(0).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortPvlanPromPorts		1.3.6.1.4.1.6296.101.3.2.1.1.20
Portlist for promiscuous ports of this port. The OctetString is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgePortDhcpFilterServer		1.3.6.1.4.1.6296.101.3.2.1.1.21
DHCP filter server status 0: disabled 1: enabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortLoopDetectStatus		1.3.6.1.4.1.6296.101.3.2.1.1.22
The adminStatus of loop-detect per ports.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortLoopDetectBlock		1.3.6.1.4.1.6296.101.3.2.1.1.23
The adminBlock mode of loop-detect per ports. Indicate whether block port or not.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortLoopDetectPeriod		1.3.6.1.4.1.6296.101.3.2.1.1.24
The sending period of detection packet.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..60

sleBridgePortLoopDetectTimer		1.3.6.1.4.1.6296.101.3.2.1.1.25
The Blocked list expire timer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..86400

sleBridgePortLoopDetectBlockStatus		1.3.6.1.4.1.6296.101.3.2.1.1.26
The operStauts of loop-detect per ports.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	block(1), unblock(2)

sleBridgePortNetBIOSFilter		1.3.6.1.4.1.6296.101.3.2.1.1.27
The netBios filter status per ports
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortPushInnertag		1.3.6.1.4.1.6296.101.3.2.1.1.28
The ingress port that push inner-tag
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortPopInnertag		1.3.6.1.4.1.6296.101.3.2.1.1.29
The egress port that pop inner-tag
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortInnertag		1.3.6.1.4.1.6296.101.3.2.1.1.30
The inner-tag value to push for incoming untagged packet
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..4096

sleBridgePortPriority		1.3.6.1.4.1.6296.101.3.2.1.1.31
The port priority value for incoming untagged packet
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..7

sleBridgePortInner2outerPri		1.3.6.1.4.1.6296.101.3.2.1.1.32
Use inner-tag's priority as outer-tag's priority.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortInner2outerVid		1.3.6.1.4.1.6296.101.3.2.1.1.33
Use inner-tag's vlan-id as outer-tag's vlan-id.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortLinkUpCnt		1.3.6.1.4.1.6296.101.3.2.1.1.34
The times of link-up event
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

sleBridgePortLinkDownCnt		1.3.6.1.4.1.6296.101.3.2.1.1.35
The times of link-down event
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

sleBridgePortLinkUpTime		1.3.6.1.4.1.6296.101.3.2.1.1.36
The elapsed time after link is up.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

sleBridgePortElapsedTimeAfterClearStats		1.3.6.1.4.1.6296.101.3.2.1.1.37
The elapsed time after clearing statistics.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

sleBridgePortMACLearningStatus		1.3.6.1.4.1.6296.101.3.2.1.1.38
If enable, SLF packet is forwarded with mac-learning. Otherwise, SLF packet is forwarded without mac-learning.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortPortBridgeStatus		1.3.6.1.4.1.6296.101.3.2.1.1.39
Port Bridge Feature for transmitting the packet out on the same port of which is received.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortUnknownMcastBlock		1.3.6.1.4.1.6296.101.3.2.1.1.40
Unknown multicast block setting for a port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortDescription		1.3.6.1.4.1.6296.101.3.2.1.1.41
The port description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..128)

sleBridgePortHoldTime		1.3.6.1.4.1.6296.101.3.2.1.1.42
The hold-time
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

sleBridgePortMacAntiSpoofing		1.3.6.1.4.1.6296.101.3.2.1.1.43
The mac anti-spoofing per port.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

sleBridgePortSwitchType		1.3.6.1.4.1.6296.101.3.2.1.1.44
Interface type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	special(1), inner(2), vlan(3), eth(4), portChannel(5), tunnel(6), unknown(255)

sleBridgePortSwitchState		1.3.6.1.4.1.6296.101.3.2.1.1.45
The interface mode to switched port or routed port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	switchedPort(1), routedPort(2)

sleBridgePortSwitchMode		1.3.6.1.4.1.6296.101.3.2.1.1.46
The switching mode of L2 interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	access(1), hybrid(2), trunk(3), ce(4), cn(5), pn(6), pe(7), cnp(8), vip(9), pip(10), cbp(11), invalid(255)

sleBridgePortSwitchSubMode		1.3.6.1.4.1.6296.101.3.2.1.1.47
The switching sub mode of L2 interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	access(1), hybrid(2), trunk(3), ce(4), cn(5), pn(6), pe(7), cnp(8), vip(9), pip(10), cbp(11), invalid(255)

sleBridgePortSwitchDefaultVlan		1.3.6.1.4.1.6296.101.3.2.1.1.48
The default VLAN of L2 interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4094

sleBridgePortSwitchIngressFilter		1.3.6.1.4.1.6296.101.3.2.1.1.49
Set the ingress filtering for the received frames.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortSwitchAccFrameType		1.3.6.1.4.1.6296.101.3.2.1.1.50
Set the Layer 2 interface acceptable frame types. This processing occurs after VLAN classification. vlan-tagged Accept only classified frames which belong to the port's member set. Hybridge interface only.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	allType(0), tagged(1), untagged(2)

sleBridgePortSwitchNativeVid		1.3.6.1.4.1.6296.101.3.2.1.1.51
The native VLAN is used for classifying the incoming untagged packets.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4094

sleBridgePortSwitchAllowedVlan		1.3.6.1.4.1.6296.101.3.2.1.1.52
Both tagged and untagged frames will be classified over interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgePortSwitchAllowedVlanEtag		1.3.6.1.4.1.6296.101.3.2.1.1.53
egress Port string
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgePortSwitchChannelType		1.3.6.1.4.1.6296.101.3.2.1.1.54
Indicate whether port is aggregator or aggregated(member).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), aggregator(1), aggregated(2)

sleBridgePortSwitchStaticChannelGroup		1.3.6.1.4.1.6296.101.3.2.1.1.55
Static channel group name
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgePortSwitchChannelLoadbalance		1.3.6.1.4.1.6296.101.3.2.1.1.56
Channel group hash method.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dstMac(1), srcMac(2), srcDstMac(3), srcIp(4), dstIp(5), srcDstIp(6), srcPort(7), dstPort(8), srcDstPort(9)

sleBridgePortSwitchAggrType		1.3.6.1.4.1.6296.101.3.2.1.1.57
aggregate type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noneAggregated(0), aggregatedStatic(1), aggregatedLacp(2), aggregatorStatic(3), aggregatorLacp(4)

sleBridgePortSwitchAggrId		1.3.6.1.4.1.6296.101.3.2.1.1.58
aggregate ID
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0 \| 1..12

sleBridgePortSwitchAggrMode		1.3.6.1.4.1.6296.101.3.2.1.1.59
aggregate mode
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noneAggregated(0), aggregatedActive(1), aggregatedPassive(2)

sleBridgePortLoopDetectPeriodMs		1.3.6.1.4.1.6296.101.3.2.1.1.91
The sending period of detection packet. (Unit: milliseconds)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..60

sleBridgePortLoopDetectAdminCount		1.3.6.1.4.1.6296.101.3.2.1.1.92
The looping Admin count of LoopDetect
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgePortLoopDetectOperCount		1.3.6.1.4.1.6296.101.3.2.1.1.93
The looping oper count of LoopDetect compared with adminCount
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgePortLoopDetectDetectedCount		1.3.6.1.4.1.6296.101.3.2.1.1.94
The looping accumulated detected count of LoopDetect
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleBridgePortLoopDetectVlan		1.3.6.1.4.1.6296.101.3.2.1.1.95
The loop detect vlan. (0: Not Set)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..4094

sleBridgePortMaxNewHosts		1.3.6.1.4.1.6296.101.3.2.1.1.96
The maximum number of New hosts allowed. Aggregation group available. Default value is 0: it means unlimited.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0 \| 1..65535

sleBridgePortStpStatus		1.3.6.1.4.1.6296.101.3.2.1.1.97
STP status per interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortStpBpduGuard		1.3.6.1.4.1.6296.101.3.2.1.1.98
The Spanning-tree bpduguard state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortOuterTpid		1.3.6.1.4.1.6296.101.3.2.1.1.99
The Ethertype for outer-tag
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

sleBridgePortMirrorMonitor		1.3.6.1.4.1.6296.101.3.2.1.1.100
The Mirror monitor status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortBandwidth		1.3.6.1.4.1.6296.101.3.2.1.1.101
The bandwidth value for interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgePortAlias		1.3.6.1.4.1.6296.101.3.2.1.1.102
The alias name for interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleBridgePortMulticast		1.3.6.1.4.1.6296.101.3.2.1.1.103
The interface supports multicast.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortFloodBlock		1.3.6.1.4.1.6296.101.3.2.1.1.104
Packet flooding discarding.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	bcast(0), dlf(1), mcast(2)

sleBridgePortControl		1.3.6.1.4.1.6296.101.3.2.2
OBJECT IDENTIFIER

sleBridgePortControlRequest		1.3.6.1.4.1.6296.101.3.2.2.1
setBridgePortPVid: sleBridgePortControlIndex sleBridgePortControlPVid setBridgePortMaxHosts: sleBridgePortControlIndex sleBridgePortControlMaxHosts setBridgePortMACFilterPermission: sleBridgePortControlIndex sleBridgePortControlMACFilterPermission setBridgePortMirrorProfile: sleBridgePortControlIndex sleBridgePortControlIngMirrorStatus sleBridgePortControlEgMirrorStatus setBridgePortBcscThresholdProfile: sleBridgePortControlIndex sleBridgePortControlBcastThreshold sleBridgePortControlMcastThreshold sleBridgePortControlDlfThreshold setBridgePortQinQStatus: sleBridgePortControlIndex sleBridgePortControlQinQStatus setBridgePortLinktype: sleBridgePortControlIndex sleBridgePortControlAdminLinktype setBridgePortEdgemode: sleBridgePortControlIndex sleBridgePortControlAdminEdgemode setBridgePortNetBIOSFilter: sleBridgePortControlIndex sleBridgePortControlNetBIOSFilter
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setBridgePortPVid(1), setBridgePortMaxHosts(2), setBridgePortMaxLearnPerUnit(3), setBridgePortMACFilterPermission(4), setBridgePortMirrorProfile(5), setBridgePortBcscThresholdProfile(6), setBridgePortQinQStatus(7), setBridgePortLinktype(8), setBridgePortEdgemode(9), setBridgePortStpBpduFilter(10), setBridgePortIsolatedStatus(11), setBridgePortStpBpduGuardErrRcv(12), setBridgePortDhcpFilterServer(13), setBridgePortLoopDetectProfile(14), setBridgePortLoopDetectUnblock(15), setBridgePortNetBIOSFilter(16), setBridgePortPushInnertag(17), setBridgePortPopInnertag(18), setBridgePortInnertag(19), setBridgePortPriority(20), setBridgePortInner2outerPri(21), setBridgePortInner2outerVid(22), setBridgePortMacLearningStatus(23), setBridgePortPortBridgeStatus(24), setBridgePortUnknownMcastBlock(25), setBridgePortDescriptopn(26), setBridgePortHoldTime(27), setBridgePortMacAntiSpoofing(28), setBridgePortSwitchStatus(29), setBridgePortSwitchMode(30), setBridgePortSwitchDefaultVlan(31), setBridgePortSwitchNativeVlan(32), setBridgePortSwitchAccFramType(33), setBridgePortSwitchAddAllowdVlan(34), setBridgePortSwitchRemoveAllowdVlan(35), setBridgePortSwitchStaticChannel(36), setBridgePortSwitchChannelLoadbalance(37), clearBridgePortLinkUpCntByIndex(38), clearBridgePortLinkUpCntAll(39), setBridgePortSwitchChannelProfile(40), setBridgePortSwitchNoChannelProfile(41), setBridgePortLoopDetectPeriodMs(71), setBridgeLoopDetectAdminCount(72), setBridgeLoopDetectVlan(73), delBridgeLoopDetectVlan(74), setBridgePortMaxNewHosts(75), clearSpanningTreeDetectedProtocols(76), setBridgePortStpStatus(77), setBridgePortStpBpduGuard(78), setBridgePortOuterTpid(79), setBridgePortMirrorMonitor(80), setBridgePortBandwidth(81), setBridgePortAlias(82), unsetBridgePortAlias(83), setBridgePortMulticast(84), setBridgePortFloodBlock(85)

sleBridgePortControlStatus		1.3.6.1.4.1.6296.101.3.2.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleBridgePortControlTimer		1.3.6.1.4.1.6296.101.3.2.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleBridgePortControlTimeStamp		1.3.6.1.4.1.6296.101.3.2.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleBridgePortControlReqResult		1.3.6.1.4.1.6296.101.3.2.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleBridgePortControlIndex		1.3.6.1.4.1.6296.101.3.2.2.6
sleBridgePortIndex
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

sleBridgePortControlPVid		1.3.6.1.4.1.6296.101.3.2.2.7
The PVID of port. Taken if no other rule given for VLAN association. If aggregated: only for group.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4094

sleBridgePortControlMaxHosts		1.3.6.1.4.1.6296.101.3.2.2.8
The maximum number of hosts allowed. Aggregation group available. Value 0 is allowed, Value -1 is used to clear.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-1..2147483647

sleBridgePortControlMaxLearnPerUnit		1.3.6.1.4.1.6296.101.3.2.2.9
Limit maximum number of MAC addresses learning newly per unit time(one second) on a port. (0: nothing learned, -l: unlimited.)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-1..2147483647

sleBridgePortControlMACFilterPermission		1.3.6.1.4.1.6296.101.3.2.2.10
The default permission for mac filtering. Valid only for physical ports, use values from MFDB Table.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deny(0), permit(1)

sleBridgePortControlIngMirrorStatus		1.3.6.1.4.1.6296.101.3.2.2.11
Mirroring on ingress packets. Valid only for physical ports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlEgMirrorStatus		1.3.6.1.4.1.6296.101.3.2.2.12
Mirroring on egress packets. Valid only for physical ports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlBcastThreshold		1.3.6.1.4.1.6296.101.3.2.2.13
Broadcast packet rate limit (unit: packets/s), Valid only for physical ports. Value 0 is used to clear. Value Range: 0-262142(TX/FX),0-2097150(GBIC).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2097150

sleBridgePortControlMcastThreshold		1.3.6.1.4.1.6296.101.3.2.2.14
Multicast packet rate limit (unit: packets/s), Valid only for physical ports. Value 0 is used to clear. Value Range: 0-262142(TX/FX),0-2097150(GBIC).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2097150

sleBridgePortControlDlfThreshold		1.3.6.1.4.1.6296.101.3.2.2.15
DLF packet rate limit (unit: packets/s), Valid only for physical ports. Value 0 is used to clear. Value Range: 0-262142(TX/FX),0-2097150(GBIC).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2097150

sleBridgePortControlQinQStatus		1.3.6.1.4.1.6296.101.3.2.2.16
QinQ Status of the port. Valid only for physical ports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlAdminLinktype		1.3.6.1.4.1.6296.101.3.2.2.17
The administrative link-type of port on the xSTP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	shared(0), pointTopoint(1), automatic(2)

sleBridgePortControlAdminEdgemode		1.3.6.1.4.1.6296.101.3.2.2.18
The administrative edgemode of port on the xSTP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlStpBpduFilter		1.3.6.1.4.1.6296.101.3.2.2.19
The stp bpdu-filter of the port on the xSTP. Default value is 0.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlPvlanIsolatedStatus		1.3.6.1.4.1.6296.101.3.2.2.20
Isolated status of this port. Default value is disable(0).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlPvlanPromPort		1.3.6.1.4.1.6296.101.3.2.2.21
Portlist for promiscuous ports of this port. The OctetString is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

sleBridgePortControlStpBpduGuardErrRcv		1.3.6.1.4.1.6296.101.3.2.2.22
Trigger manual recovery for the port disabled by Bpdu Guard. false : sustain current state. true : trigger recovery.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

sleBridgePortControlDhcpFilterServer		1.3.6.1.4.1.6296.101.3.2.2.23
DHCP filter server status 0: disabled 1: enabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlLoopDetectStatus		1.3.6.1.4.1.6296.101.3.2.2.24
The adminStatus of loop-detect per ports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortControlLoopDetectBlock		1.3.6.1.4.1.6296.101.3.2.2.25
The adminBlock mode of loop-detect per ports. Indicate whether block port or not.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortControlLoopDetectPeriod		1.3.6.1.4.1.6296.101.3.2.2.26
The sending period of detection packet.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..60

sleBridgePortControlLoopDetectTimer		1.3.6.1.4.1.6296.101.3.2.2.27
The Blocked list expire timer.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 1..86400

sleBridgePortControlNetBIOSFilter		1.3.6.1.4.1.6296.101.3.2.2.28
The netBios filter status per ports
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlPushInnertag		1.3.6.1.4.1.6296.101.3.2.2.29
Push inner-tag for incoming untagged packet.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlPopInnertag		1.3.6.1.4.1.6296.101.3.2.2.30
Pop inner-tag for double tagged packet.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlInnertag		1.3.6.1.4.1.6296.101.3.2.2.31
Inner-tag value to push for incoming untagged packet.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..4096

sleBridgePortControlPriority		1.3.6.1.4.1.6296.101.3.2.2.32
The priority value per port. Assign priority for untagged packet from port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..7

sleBridgePortControlInner2outerPri		1.3.6.1.4.1.6296.101.3.2.2.33
If enable, use inner-tag's priority as outer-tag's priority. Otherwise, use outer-tag's priority
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlInner2outerVid		1.3.6.1.4.1.6296.101.3.2.2.34
If enable, use inner-tag's vlan-id as outer-tag's vlan-id. Otherwise, use outer-tag's vlan-id
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlMACLearningStatus		1.3.6.1.4.1.6296.101.3.2.2.35
If enable, SLF packet is forwarded with mac-learning. Otherwise, SLF packet is forwarded without mac-learning.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortControlPortBridgeStatus		1.3.6.1.4.1.6296.101.3.2.2.36
Port Bridge Feature for transmitting the packet out on the same port of which is received.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortControlUnknownMcastBlock		1.3.6.1.4.1.6296.101.3.2.2.37
Unknown multicast block setting for a port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortControlDescription		1.3.6.1.4.1.6296.101.3.2.2.38
The Port Description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..128)

sleBridgePortControlHoldTime		1.3.6.1.4.1.6296.101.3.2.2.39
The hold-time
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

sleBridgePortControlMacAntiSpoofing		1.3.6.1.4.1.6296.101.3.2.2.40
The mac anti-spoofing per port.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue	true(1), false(2)

sleBridgePortControlSwitchStatus		1.3.6.1.4.1.6296.101.3.2.2.41
The interface mode to switched port or routed port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	switchedPort(1), routedPort(2)

sleBridgePortControlSwitchMode		1.3.6.1.4.1.6296.101.3.2.2.42
The switching mode of L2 interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	access(1), hybrid(2), trunk(3), ce(4), cn(5), pn(6), pe(7), cnp(8), vip(9), pip(10), cbp(11), invalid(255)

sleBridgePortControlSwitchSubMode		1.3.6.1.4.1.6296.101.3.2.2.43
The switching sub mode of L2 interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	access(1), hybrid(2), trunk(3), ce(4), cn(5), pn(6), pe(7), cnp(8), vip(9), pip(10), cbp(11), invalid(255)

sleBridgePortControlSwitchDefaultVlan		1.3.6.1.4.1.6296.101.3.2.2.44
The dafulat VLAN of L2 interface
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleBridgePortControlSwitchIngressFilter		1.3.6.1.4.1.6296.101.3.2.2.45
Set the ingress filtering for the received frames
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

sleBridgePortControlSwitchAccFrameType		1.3.6.1.4.1.6296.101.3.2.2.46
Set the Layer 2 interface acceptable frame types. This processing occurs after VLAN classification. vlan-tagged Accept only classified frames which belong to the port's member set. Hybridge interface only.
Status: current	Access: read-write
OBJECT-TYPE
	BITS	allType(0), tagged(1), unTagged(2)

sleBridgePortControlSwitchNativeVid		1.3.6.1.4.1.6296.101.3.2.2.47
The native VLAN is used for classifying the incoming untagged packets.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleBridgePortControlSwitchAllowedVlan		1.3.6.1.4.1.6296.101.3.2.2.48
Both tagged and untagged frames will be classified over interfaces.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgePortControlSwitchAllowedVlanEtag		1.3.6.1.4.1.6296.101.3.2.2.49
egress Port string
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgePortControlSwitchStaticChannelGroup		1.3.6.1.4.1.6296.101.3.2.2.50
Static channel group name
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgePortControlSwitchChannelLoadbalance		1.3.6.1.4.1.6296.101.3.2.2.51
Channel group hash method.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dstMac(1), srcMac(2), srcDstMac(3), srcIp(4), dstIp(5), srcDstIp(6), srcPort(7), dstPort(8), srcDstPort(9)

sleBridgePortControlSwitchAggrType		1.3.6.1.4.1.6296.101.3.2.2.52
aggregate type
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noneAggregated(0), aggregatedStatic(1), aggregatedLacp(2), aggregatorStatic(3), aggregatorLacp(4)

sleBridgePortControlSwitchAggrId		1.3.6.1.4.1.6296.101.3.2.2.53
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..12

sleBridgePortControlSwitchAggrMode		1.3.6.1.4.1.6296.101.3.2.2.54
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noneAggregated(0), aggregatedActive(1), aggregatedPassive(2)

sleBridgePortControlLoopDetectPeriodMs		1.3.6.1.4.1.6296.101.3.2.2.91
The sending period of detection packet (Unit: milliseconds).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..60

sleBridgePortControlLoopDetectAdminCount		1.3.6.1.4.1.6296.101.3.2.2.92
The looping count of LoopDetect
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..60

sleBridgePortControlLoopDetectVlan		1.3.6.1.4.1.6296.101.3.2.2.93
The loop detect vlan
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleBridgePortControlMaxNewHosts		1.3.6.1.4.1.6296.101.3.2.2.94
The maximum number of hosts allowed. Aggregation group available. Value 0 is allowed. Default value is -1: it means unlimited.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1 \| 0 \| 1..65535

sleBridgePortControlStpStatus		1.3.6.1.4.1.6296.101.3.2.2.95
STP status per interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlStpBpduGuard		1.3.6.1.4.1.6296.101.3.2.2.96
The Spanning-tree bpduguard state
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlOuterTpid		1.3.6.1.4.1.6296.101.3.2.2.97
The Ethertype for outer-tag
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

sleBridgePortControlMirrorMonitor		1.3.6.1.4.1.6296.101.3.2.2.98
The Mirror monitor status
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlBandwidth		1.3.6.1.4.1.6296.101.3.2.2.99
The bandwidth value for interface.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgePortControlAlias		1.3.6.1.4.1.6296.101.3.2.2.100
The alias name for interface.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleBridgePortControlMulticast		1.3.6.1.4.1.6296.101.3.2.2.101
The interface supports multicast.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleBridgePortControlFloodBlock		1.3.6.1.4.1.6296.101.3.2.2.102
Packet flooding discarding.
Status: current	Access: read-write
OBJECT-TYPE
	BITS	bcast(0), dlf(1), mcast(2)

sleBridgePortNotification		1.3.6.1.4.1.6296.101.3.2.3
OBJECT IDENTIFIER

sleBridgePortPVidChanged		1.3.6.1.4.1.6296.101.3.2.3.1
PVid changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMaxHostsChanged		1.3.6.1.4.1.6296.101.3.2.3.2
MaxHosts changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMaxLearnPerUnitChanged		1.3.6.1.4.1.6296.101.3.2.3.3
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMACFilterPermissionChanged		1.3.6.1.4.1.6296.101.3.2.3.4
MAC filter permission changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMirrorProfileChanged		1.3.6.1.4.1.6296.101.3.2.3.5
Mirror profile changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortBcscThresholdProfileChanged		1.3.6.1.4.1.6296.101.3.2.3.6
BCSC threshold profile changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortQinQStatusChanged		1.3.6.1.4.1.6296.101.3.2.3.7
QinQ status changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortLinktypeChanged		1.3.6.1.4.1.6296.101.3.2.3.8
Admin link-type changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortEdgemodeChanged		1.3.6.1.4.1.6296.101.3.2.3.9
Admin edge-mode changed
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortStpBpduFilterChanged		1.3.6.1.4.1.6296.101.3.2.3.10
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortPvlanIsolatedStatusChanged		1.3.6.1.4.1.6296.101.3.2.3.11
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortStpBpduGuardErrRcvChanged		1.3.6.1.4.1.6296.101.3.2.3.12
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortDhcpFilterServerChanged		1.3.6.1.4.1.6296.101.3.2.3.13
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortLoopDetectProfileChanged		1.3.6.1.4.1.6296.101.3.2.3.14
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortLoopDetectUnblock		1.3.6.1.4.1.6296.101.3.2.3.15
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortNetBIOSFilterChanged		1.3.6.1.4.1.6296.101.3.2.3.16
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortPushInnertagChanged		1.3.6.1.4.1.6296.101.3.2.3.17
setBridgePortPushInnertag
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortPopInnertagChanged		1.3.6.1.4.1.6296.101.3.2.3.18
setBridgePortPopInnertag
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortInnertagChanged		1.3.6.1.4.1.6296.101.3.2.3.19
setBridgePortInnertag
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortPriorityChanged		1.3.6.1.4.1.6296.101.3.2.3.20
setBridgePortPriority
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortInner2outerPriChanged		1.3.6.1.4.1.6296.101.3.2.3.21
setBridgePortInner2outerPri
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortInner2outerVidChanged		1.3.6.1.4.1.6296.101.3.2.3.22
setBridgePortInner2outerVid
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMACLearningStatusChanged		1.3.6.1.4.1.6296.101.3.2.3.23
sleBridgePortMACLearningStatus
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortPortBridgeStatusChanged		1.3.6.1.4.1.6296.101.3.2.3.24
sleBridgePortPortBridgeStatus
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortUnknownMcastBlockChanged		1.3.6.1.4.1.6296.101.3.2.3.25
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortDescriptionChanged		1.3.6.1.4.1.6296.101.3.2.3.26
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortHoldTimeChanged		1.3.6.1.4.1.6296.101.3.2.3.27
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMacAntiSpoofChanged		1.3.6.1.4.1.6296.101.3.2.3.28
setBridgePortMacAntiSpoofing
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchStatusChanged		1.3.6.1.4.1.6296.101.3.2.3.29
setBridgePortSwitchStatus
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchModeChanged		1.3.6.1.4.1.6296.101.3.2.3.30
setBridgePortSwitchMode
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchDefaultVlanChanged		1.3.6.1.4.1.6296.101.3.2.3.31
setBridgePortSwitchDefaultVlan
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchNativeVlanChanged		1.3.6.1.4.1.6296.101.3.2.3.32
setBridgePortSwitchNativeVlan
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchAccFramTypeChanged		1.3.6.1.4.1.6296.101.3.2.3.33
setBridgePortSwitchAccFramType
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchAllowdVlanAdded		1.3.6.1.4.1.6296.101.3.2.3.34
setBridgePortSwitchAddAllowdVlan
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchAllowdVlanDeleted		1.3.6.1.4.1.6296.101.3.2.3.35
setBridgePortSwitchRemoveAllowdVlan
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchStaticChannelChanged		1.3.6.1.4.1.6296.101.3.2.3.36
setBridgePortSwitchStaticChannel
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchChannelLoadbalanceChanged		1.3.6.1.4.1.6296.101.3.2.3.37
setBridgePortSwitchChannelLoadbalance
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortPortLinkCntChanged		1.3.6.1.4.1.6296.101.3.2.3.38
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchChannelProfileChanged		1.3.6.1.4.1.6296.101.3.2.3.39
setBridgePortSwitchChannelProfile
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSwitchChannelProfileDeleted		1.3.6.1.4.1.6296.101.3.2.3.40
setBridgePortSwitchNoChannelProfile
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortLoopDetectPeriodMsChanged		1.3.6.1.4.1.6296.101.3.2.3.71
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortLoopDetectLoopingCountChanged		1.3.6.1.4.1.6296.101.3.2.3.72
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortLoopDetectVlanChanged		1.3.6.1.4.1.6296.101.3.2.3.73
setBridgeLoopDetectVlan
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortLoopDetectVlanDeleted		1.3.6.1.4.1.6296.101.3.2.3.74
delBridgeLoopDetectVlan
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMaxNewHostsChanged		1.3.6.1.4.1.6296.101.3.2.3.75
setBridgePortMaxNewHosts
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortSpanningTreeDetectedProtocolsCleared		1.3.6.1.4.1.6296.101.3.2.3.76
clearSpanningTreeDetectedProtocols
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortStpStatusChanged		1.3.6.1.4.1.6296.101.3.2.3.77
setBridgePortStpStatus
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortStpBpduGuardChanged		1.3.6.1.4.1.6296.101.3.2.3.78
setBridgePortStpBpduGuard
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortOuterTpidChanged		1.3.6.1.4.1.6296.101.3.2.3.79
setBridgePortOuterTpid
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMirrorMonitorChanged		1.3.6.1.4.1.6296.101.3.2.3.80
setBridgePortMirrorMonitor
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortBandwidthChanged		1.3.6.1.4.1.6296.101.3.2.3.81
setBridgePortBandwidth
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortAliasSet		1.3.6.1.4.1.6296.101.3.2.3.82
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortAliasUnset		1.3.6.1.4.1.6296.101.3.2.3.83
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortMulticastChanged		1.3.6.1.4.1.6296.101.3.2.3.84
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleBridgePortFloodBlockChanged		1.3.6.1.4.1.6296.101.3.2.3.85
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlan		1.3.6.1.4.1.6296.101.3.3
OBJECT IDENTIFIER

sleVlanTable		1.3.6.1.4.1.6296.101.3.3.1
sle vlan table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleVlanEntry

sleVlanEntry		1.3.6.1.4.1.6296.101.3.3.1.1
key: sleVlanIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleVlanEntry

sleVlanIndex		1.3.6.1.4.1.6296.101.3.3.1.1.1
A vlan-identifier.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4094

sleVlanIfIndex		1.3.6.1.4.1.6296.101.3.3.1.1.2
Same as ifIndex (for appropriated ifTable entries).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleVlanName		1.3.6.1.4.1.6296.101.3.3.1.1.3
A descriptional name for that vlan.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleVlanStatus		1.3.6.1.4.1.6296.101.3.3.1.1.4
static, in future gvrp
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic(2)

sleVlanEgressPorts		1.3.6.1.4.1.6296.101.3.3.1.1.5
Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sleBridgePortIndex. The least significant byte is the second octet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleVlanUnTaggedPorts		1.3.6.1.4.1.6296.101.3.3.1.1.6
Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sleBridgePortIndex. The least significant byte is the second octet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleVlanCreationTime		1.3.6.1.4.1.6296.101.3.3.1.1.7
Only useful in case of gvrp.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleVlanAgeingTime		1.3.6.1.4.1.6296.101.3.3.1.1.8
The ageing time per vlan
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-1 \| 0 \| 10..21474830

sleVlanTagTxCounter		1.3.6.1.4.1.6296.101.3.3.1.1.9
The VLAN tag tx counter.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

sleVlanDescription		1.3.6.1.4.1.6296.101.3.3.1.1.10
createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleVlanElineEnable		1.3.6.1.4.1.6296.101.3.3.1.1.11
Indicate whether E-line service enable or not
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleVlanOperStatus		1.3.6.1.4.1.6296.101.3.3.1.1.12
The Vlan operation status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(0), inactive(1), active(2)

sleVlanMtu		1.3.6.1.4.1.6296.101.3.3.1.1.13
The Vlan MTU.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleVlanType		1.3.6.1.4.1.6296.101.3.3.1.1.14
The Vlan service either customer or service.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	customer(1), service(2)

sleVlanControl		1.3.6.1.4.1.6296.101.3.3.2
OBJECT IDENTIFIER

sleVlanControlRequest		1.3.6.1.4.1.6296.101.3.3.2.1
createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision destroyVlan: sleVlanControlIndex setVlanPortProfile: sleVlanControlIndex sleVlanControlEgressPorts sleVlanControlUnTaggedPorts setVlanMulticastPermission: sleVlanControlIndex sleVlanControlMulticastPermission
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	createVlan(1), destroyVlan(2), setVlanPortProfile(3), setVlanAgeingTime(4), createVlanRange(5), setVlanDesc(6), createElineVlan(7), setVlanOperStatus(8), setVlanMtu(9), setVlanServiceOperStatus(10)

sleVlanControlStatus		1.3.6.1.4.1.6296.101.3.3.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleVlanControlTimer		1.3.6.1.4.1.6296.101.3.3.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleVlanControlTimeStamp		1.3.6.1.4.1.6296.101.3.3.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleVlanControlReqResult		1.3.6.1.4.1.6296.101.3.3.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleVlanControlIndex		1.3.6.1.4.1.6296.101.3.3.2.6
Vlan's ID
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleVlanControlName		1.3.6.1.4.1.6296.101.3.3.2.7
Vlan's name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleVlanControlEgressPorts		1.3.6.1.4.1.6296.101.3.3.2.8
Portlist for all member of this VLAN, they will send tagged or untagged frames. The OctetString is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleVlanControlUnTaggedPorts		1.3.6.1.4.1.6296.101.3.3.2.9
Portlist for members of this Vlan they will send only untagged frames. The OctetString is a list of pairs of octets each identify an sleBridgePortIndex. The least significant byte is the second octet.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleVlanControlAgeingTime		1.3.6.1.4.1.6296.101.3.3.2.10
The ageing time per vlan (supported only model 5924N)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-1 \| 0 \| 10..21474830

sleVlanControlIndexTo		1.3.6.1.4.1.6296.101.3.3.2.11
Vlan's ID
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleVlanControlDescription		1.3.6.1.4.1.6296.101.3.3.2.12
createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleVlanControlElineEnable		1.3.6.1.4.1.6296.101.3.3.2.13
Indicate whether E-line service enable or not
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleVlanControlOperStatus		1.3.6.1.4.1.6296.101.3.3.2.14
The Vlan operation status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	invalid(0), inactive(1), active(2)

sleVlanControlMtu		1.3.6.1.4.1.6296.101.3.3.2.15
The Vlan MTU.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

sleVlanControlType		1.3.6.1.4.1.6296.101.3.3.2.16
The Vlan service type.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	customer(1), service(2)

sleVlanControlServiceType		1.3.6.1.4.1.6296.101.3.3.2.17
The Vlan service type.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	pointToPoint(1), multipointToMultipoint(2), rootedToMultipoint(3)

sleVlanNotification		1.3.6.1.4.1.6296.101.3.3.3
OBJECT IDENTIFIER

sleVlanCreated		1.3.6.1.4.1.6296.101.3.3.3.1
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanDestroyed		1.3.6.1.4.1.6296.101.3.3.3.2

Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanPortProfileChanged		1.3.6.1.4.1.6296.101.3.3.3.3

Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanAgeingTimeChanged		1.3.6.1.4.1.6296.101.3.3.3.4
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanRangeCreated		1.3.6.1.4.1.6296.101.3.3.3.5
Description.
Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanDescriptionChanged		1.3.6.1.4.1.6296.101.3.3.3.6
setVlanDesc
Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanElineVlanCreated		1.3.6.1.4.1.6296.101.3.3.3.7
createElineVlan
Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanOperStatusChagned		1.3.6.1.4.1.6296.101.3.3.3.8
setVlanOperStatus
Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanMtuChagned		1.3.6.1.4.1.6296.101.3.3.3.9
sleVlanMtuChanged
Status: current	Access: read-write
NOTIFICATION-TYPE

sleServiceVlanTable		1.3.6.1.4.1.6296.101.3.3.4
sle vlan table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleServiceVlanEntry

sleServiceVlanEntry		1.3.6.1.4.1.6296.101.3.3.4.1
key: sleVlanIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleServiceVlanEntry

sleServiceVlanIndex		1.3.6.1.4.1.6296.101.3.3.4.1.1
A vlan-identifier.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4094

sleServiceVlanName		1.3.6.1.4.1.6296.101.3.3.4.1.2
A descriptional name for that vlan.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleServiceVlanDescription		1.3.6.1.4.1.6296.101.3.3.4.1.3
createVlan: (sleVlanControlIndex) sleVlanControlName sleVlanControlMulticastPermision
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleServiceVlanOperStatus		1.3.6.1.4.1.6296.101.3.3.4.1.4
The Vlan operation status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(0), inactive(1), active(2)

sleServiceVlanMtu		1.3.6.1.4.1.6296.101.3.3.4.1.5
The Vlan MTU.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleServiceVlanStatus		1.3.6.1.4.1.6296.101.3.3.4.1.6
static, in future gvrp
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic(2)

sleServiceVlanType		1.3.6.1.4.1.6296.101.3.3.4.1.7
The Vlan service either customer or service.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	customer(1), service(2)

sleServiceVlanSeviceType		1.3.6.1.4.1.6296.101.3.3.4.1.8
The Vlan service type.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	pointToPoint(1), multipointToMultipoint(2), rootedToMultipoint(3)

sleVlanMap		1.3.6.1.4.1.6296.101.3.4
OBJECT IDENTIFIER

sleVlanMapTable		1.3.6.1.4.1.6296.101.3.4.1
vlan map table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleVlanMapEntry

sleVlanMapEntry		1.3.6.1.4.1.6296.101.3.4.1.1
key: sleVlanIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleVlanMapEntry

sleVlanMapFid		1.3.6.1.4.1.6296.101.3.4.1.1.1
Index of the used Filtering Table entry.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

sleVlanMapStpId		1.3.6.1.4.1.6296.101.3.4.1.1.2
Index of the used STP instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

sleVlanMapErpDomainId		1.3.6.1.4.1.6296.101.3.4.1.1.3
Index of the used Erp Domain.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

sleVlanMapControl		1.3.6.1.4.1.6296.101.3.4.2
OBJECT IDENTIFIER

sleVlanMapControlRequest		1.3.6.1.4.1.6296.101.3.4.2.1
setVlanMapFid: sleVlanMapControlIndex sleVlanMapFid setVlanMapStpId: sleVlanMapControlIndex sleVlanMapStpId setVlanMapErpDomainId: sleVlanMapControlIndex sleVlanMapErpDomainId
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setVlanMapFid(1), setVlanMapStpId(2), setVlanMapErpDomainId(3)

sleVlanMapControlStatus		1.3.6.1.4.1.6296.101.3.4.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleVlanMapControlTimer		1.3.6.1.4.1.6296.101.3.4.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleVlanMapControlTimeStamp		1.3.6.1.4.1.6296.101.3.4.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleVlanMapControlReqResult		1.3.6.1.4.1.6296.101.3.4.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleVlanMapControlIndex		1.3.6.1.4.1.6296.101.3.4.2.6
vlan map index.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleVlanMapControlFid		1.3.6.1.4.1.6296.101.3.4.2.7
FDB identifier
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

sleVlanMapControlStpId		1.3.6.1.4.1.6296.101.3.4.2.8
STP Instance Identifier
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

sleVlanMapControlErpDomainId		1.3.6.1.4.1.6296.101.3.4.2.9
The Erp Domain ID.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

sleVlanMapNotification		1.3.6.1.4.1.6296.101.3.4.3
OBJECT IDENTIFIER

sleVlanMapFidChanged		1.3.6.1.4.1.6296.101.3.4.3.1

Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanMapStpIdChanged		1.3.6.1.4.1.6296.101.3.4.3.2

Status: current	Access: read-write
NOTIFICATION-TYPE

sleVlanMapErpDomainIdChanged		1.3.6.1.4.1.6296.101.3.4.3.3

Status: current	Access: read-write
NOTIFICATION-TYPE

sleStp		1.3.6.1.4.1.6296.101.3.5
OBJECT IDENTIFIER

sleStpInfo		1.3.6.1.4.1.6296.101.3.5.1
OBJECT IDENTIFIER

sleStpOperationMode		1.3.6.1.4.1.6296.101.3.5.1.1
The operation mode of running the STP at the switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stp(0), rstp(1), mstp(3), pvstp(4), pvrstp(5), pvrstpPlus(6), pvstpPlus(7)

sleStpFormatSelector		1.3.6.1.4.1.6296.101.3.5.1.2
The MST configuration format selector.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

sleStpConfigureName		1.3.6.1.4.1.6296.101.3.5.1.3
The MST configuration name of at most 32 characters.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleStpRevisionLevel		1.3.6.1.4.1.6296.101.3.5.1.4
The MST configuration revision.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

sleStpFwdDelay		1.3.6.1.4.1.6296.101.3.5.1.5
The STP bridge forward delay.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	4..300

sleStpHelloTime		1.3.6.1.4.1.6296.101.3.5.1.6
The STP bridge hello time.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

sleStpMaxAge		1.3.6.1.4.1.6296.101.3.5.1.7
The STP bridge max age.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	6..40

sleStpMaxHops		1.3.6.1.4.1.6296.101.3.5.1.8
The MST bridge max hops.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..40

sleStpExtRootBridgeId		1.3.6.1.4.1.6296.101.3.5.1.9
The MST CST root identifier.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

sleStpExtPathcost		1.3.6.1.4.1.6296.101.3.5.1.10
The MST CST root path cost.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

sleStpBpduGuardMode		1.3.6.1.4.1.6296.101.3.5.1.11
Indicates the mode of Bpdu Guard Feature on the switch. When the system with Bpdu Guard enabled receives a BPDU from any port, that port is immediately disabled. disable -- the Bpdu Guard feature is disabled on this switch. enable -- the Bpdu Guard feature is enabled on this switch. Whether the Bpdu Guard feature is enabled or not on this switch depends on the object value of sleStpControlBpduGuardMode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleStpBpduGuardAutoRcvMode		1.3.6.1.4.1.6296.101.3.5.1.12
Indicates the automatic recovery mode for the ports disabled by Bpdu Guard. disable -- the Bpdu Guard Auto Recovery feature is disabled on this switch. enable -- the Bpdu Guard Auto Recovery feature is enabled on this switch. Whether the Bpdu Guard Auto Recovery feature is enabled or not on this switch depends on the object value of sleStpControlBpduGuardAutoRcvMode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleStpBpduGuardAutoRcvTime		1.3.6.1.4.1.6296.101.3.5.1.13
Indicates the automatic recovery time for the ports disabled by Bpdu Guard. Unit: second The Bpdu Guard Auto Recovery time depends on the object value of sleStpControlBpduGuardAutoRcvTime.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	10..1000000

sleStpControl		1.3.6.1.4.1.6296.101.3.5.2
OBJECT IDENTIFIER

sleStpControlRequest		1.3.6.1.4.1.6296.101.3.5.2.1
setStpOperationMode: sleStpControlOperationMode setStpConfigureProfile: sleStpControlConfigureName sleStpControlRevisionLevel setStpTimerProfile sleStpControlFwdDelay sleStpControlHelloTime sleStpControlMaxAge sleStpControlMaxHops
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setStpOperationMode(1), setStpConfigureProfile(2), setStpTimerProfile(3), setStpBpduGuardProfile(4)

sleStpControlStatus		1.3.6.1.4.1.6296.101.3.5.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleStpControlTimer		1.3.6.1.4.1.6296.101.3.5.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleStpControlTimeStamp		1.3.6.1.4.1.6296.101.3.5.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleStpControlReqResult		1.3.6.1.4.1.6296.101.3.5.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleStpControlOperationMode		1.3.6.1.4.1.6296.101.3.5.2.6
The operation mode of running the STP at the switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stp(0), rstp(1), mstp(3), pvstp(4), pvrstp(5), pvrstpPlus(6), pvstpPlus(7)

sleStpControlConfigureName		1.3.6.1.4.1.6296.101.3.5.2.7
The MST configuration name of at most 32 characters.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

sleStpControlRevisionLevel		1.3.6.1.4.1.6296.101.3.5.2.8
The MST configuration revision.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

sleStpControlFwdDelay		1.3.6.1.4.1.6296.101.3.5.2.9
The STP bridge forward delay.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	4..30

sleStpControlHelloTime		1.3.6.1.4.1.6296.101.3.5.2.10
The STP bridge hello time.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

sleStpControlMaxAge		1.3.6.1.4.1.6296.101.3.5.2.11
The STP bridge max age.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	4..60

sleStpControlMaxHops		1.3.6.1.4.1.6296.101.3.5.2.12
The MST bridge max hops.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..40

sleStpControlBpduGuardMode		1.3.6.1.4.1.6296.101.3.5.2.13
Configures the mode of Bpdu Guard Feature on the switch. When the system with Bpdu Guard enabled receives a BPDU from any port, that port is immediately disabled. disable -- the Bpdu Guard feature is disabled on this switch. enable -- the Bpdu Guard feature is enabled on this switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleStpControlBpduGuardAutoRcvMode		1.3.6.1.4.1.6296.101.3.5.2.14
Configures the automatic recovery mode for the ports disabled by Bpdu Guard. disable -- the Bpdu Guard Auto Recovery feature is disabled on this switch. enable -- the Bpdu Guard Auto Recovery feature is enabled on this switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleStpControlBpduGuardAutoRcvTime		1.3.6.1.4.1.6296.101.3.5.2.15
Configures the automatic recovery time for the ports disabled by Bpdu Guard. Unit: second
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10..1000000

sleStpNotification		1.3.6.1.4.1.6296.101.3.5.3
OBJECT IDENTIFIER

sleStpOperationModeChanged		1.3.6.1.4.1.6296.101.3.5.3.1

Status: current	Access: read-write
NOTIFICATION-TYPE

sleStpConfigureProfileChanged		1.3.6.1.4.1.6296.101.3.5.3.2

Status: current	Access: read-write
NOTIFICATION-TYPE

sleStpTimerProfileChanged		1.3.6.1.4.1.6296.101.3.5.3.3

Status: current	Access: read-write
NOTIFICATION-TYPE

sleStpBpduGuardProfileChanged		1.3.6.1.4.1.6296.101.3.5.3.4

Status: current	Access: read-write
NOTIFICATION-TYPE

sleStpInstance		1.3.6.1.4.1.6296.101.3.6
OBJECT IDENTIFIER

sleStpInstanceTable		1.3.6.1.4.1.6296.101.3.6.1
STP instance table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleStpInstanceEntry

sleStpInstanceEntry		1.3.6.1.4.1.6296.101.3.6.1.1
key: sleStpInstanceIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleStpInstanceEntry

sleStpInstanceIndex		1.3.6.1.4.1.6296.101.3.6.1.1.1
The STP instance ID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..4096

sleStpInstanceEnable		1.3.6.1.4.1.6296.101.3.6.1.1.2
The enabled/disabled status of the pvst.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(0), disable(1)

sleStpInstancePriority		1.3.6.1.4.1.6296.101.3.6.1.1.3
The bridge priority.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleStpInstanceRootBridgeId		1.3.6.1.4.1.6296.101.3.6.1.1.4
The STP designated root bridge identifier in a specific instance. Size: 8.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

sleStpInstanceRootPathcost		1.3.6.1.4.1.6296.101.3.6.1.1.5
The STP root path cost in a specific instance.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleStpInstanceDesignatedBridgeId		1.3.6.1.4.1.6296.101.3.6.1.1.6
TThe STP designated bridge identifier.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

sleStpInstanceDesignatedPortId		1.3.6.1.4.1.6296.101.3.6.1.1.7
The STP designated port identifier.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..256

sleStpInstanceRootPortId		1.3.6.1.4.1.6296.101.3.6.1.1.8
The port number of the port which offers the lowest cost path from the this STP instance of this bridge to the root bridge.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..256

sleStpInstanceFwdDelay		1.3.6.1.4.1.6296.101.3.6.1.1.9
The current forward delay of the STP Instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	4..30

sleStpInstanceHelloTime		1.3.6.1.4.1.6296.101.3.6.1.1.10
The current hello time of the STP Instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

sleStpInstanceMaxAge		1.3.6.1.4.1.6296.101.3.6.1.1.11
The current max age of the STP Instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	4..60

sleStpInstanceRemainHops		1.3.6.1.4.1.6296.101.3.6.1.1.12
The current remain hops of the MSTI or pvst.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleStpInstanceBrFwdDelay		1.3.6.1.4.1.6296.101.3.6.1.1.13
The Setting forward delay of the STP Instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	4..30

sleStpInstanceBrHelloTime		1.3.6.1.4.1.6296.101.3.6.1.1.14
The current hello time of the STP Instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

sleStpInstanceBrMaxAge		1.3.6.1.4.1.6296.101.3.6.1.1.15
The Setting max age of the STP Instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	4..60

sleStpInstanceControl		1.3.6.1.4.1.6296.101.3.6.2
OBJECT IDENTIFIER

sleStpInstanceControlRequest		1.3.6.1.4.1.6296.101.3.6.2.1
createStpInstance: sleStpInstanceControlIndex sleStpInstanceControlEnable sleStpInstanceControlPriority sleStpInstanceControlBrFwdDelay sleStpInstanceControlBrHelloTime sleStpInstanceControlBrMaxAge destroyStpInstance: sleStpInstanceControlIndex setStpInstanceEnable: sleStpInstanceControlIndex sleStpInstanceControlEnable setStpInstanceConfigProfile: sleStpInstanceControlIndex sleStpInstanceControlPriority sleStpInstanceControlBrFwdDelay sleStpInstanceControlBrHelloTime sleStpInstanceControlBrMaxAge
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setStpInstanceEnable(1), setStpInstanceConfigProfile(2)

sleStpInstanceControlStatus		1.3.6.1.4.1.6296.101.3.6.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleStpInstanceControlTimer		1.3.6.1.4.1.6296.101.3.6.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleStpInstanceControlTimeStamp		1.3.6.1.4.1.6296.101.3.6.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleStpInstanceControlReqResult		1.3.6.1.4.1.6296.101.3.6.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleStpInstanceControlIndex		1.3.6.1.4.1.6296.101.3.6.2.6
sleStpInstanceIndex
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..4096

sleStpInstanceControlEnable		1.3.6.1.4.1.6296.101.3.6.2.7
The enabled/disabled status of the pvst.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleStpInstanceControlPriority		1.3.6.1.4.1.6296.101.3.6.2.8
The Setting bridge priority in a specific instance. This values are matched specific values in CLI. sleStpInstanceControlPriority X 4096 is equal to priority value in CLI. (ex. 2 in SNMP means 8192 in CLI)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..16

sleStpInstanceControlBrFwdDelay		1.3.6.1.4.1.6296.101.3.6.2.9
The Setting forward delay of the MSTI or pvst.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	4..30

sleStpInstanceControlBrHelloTime		1.3.6.1.4.1.6296.101.3.6.2.10
The current hello time of the MSTI or pvst.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

sleStpInstanceControlBrMaxAge		1.3.6.1.4.1.6296.101.3.6.2.11
The Setting max age of the MSTI or pvst.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	4..60

sleStpInstanceNotification		1.3.6.1.4.1.6296.101.3.6.3
OBJECT IDENTIFIER

sleStpInstanceEnableChanged		1.3.6.1.4.1.6296.101.3.6.3.1

Status: current	Access: read-write
NOTIFICATION-TYPE

sleStpInstanceConfigProfileChanged		1.3.6.1.4.1.6296.101.3.6.3.2

Status: current	Access: read-write
NOTIFICATION-TYPE

sleStpInstancePort		1.3.6.1.4.1.6296.101.3.7
OBJECT IDENTIFIER

sleStpInstancePortTable		1.3.6.1.4.1.6296.101.3.7.1
STP instance port table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleStpInstancePortEntry

sleStpInstancePortEntry		1.3.6.1.4.1.6296.101.3.7.1.1
key: sleStpInstanceIndex, sleStpInstancePortIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleStpInstancePortEntry

sleStpInstancePortIndex		1.3.6.1.4.1.6296.101.3.7.1.1.1
The Port ID.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

sleStpInstancePortPathcost		1.3.6.1.4.1.6296.101.3.7.1.1.2
The STP port path cost.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..200000000

sleStpInstancePortPriority		1.3.6.1.4.1.6296.101.3.7.1.1.3
The STP port priority.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

sleStpInstancePortRole		1.3.6.1.4.1.6296.101.3.7.1.1.4
The current STP Role of the Port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), designated(1), root(2), master(3), alternate(4), backup(5)

sleStpInstancePortState		1.3.6.1.4.1.6296.101.3.7.1.1.5
The STP forwarding state of a specific port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), listening(1), learning(2), forwarding(3), blocking(4)

sleStpInstancePortRootBridgeId		1.3.6.1.4.1.6296.101.3.7.1.1.6
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

sleStpInstancePortRootPathcost		1.3.6.1.4.1.6296.101.3.7.1.1.7
The path cost of the Designated Port of the segment connected to this port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleStpInstancePortDesignateBridgeId		1.3.6.1.4.1.6296.101.3.7.1.1.8
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

sleStpInstancePortDesignatePortId		1.3.6.1.4.1.6296.101.3.7.1.1.9
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..256

sleStpInstancePortRootGuardMode		1.3.6.1.4.1.6296.101.3.7.1.1.10
An indication of whether the RootGuard capability is enabled on this port or not. This configuration will be applied to the VLAN or MSTP instance in which this port exists. Whether the RootGuard capability is enabled or not on this switch depends on the object value of sleStpInstancePortControlRootGuardMode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleStpInstancePortControl		1.3.6.1.4.1.6296.101.3.7.2
OBJECT IDENTIFIER

sleStpInstancePortControlRequest		1.3.6.1.4.1.6296.101.3.7.2.1
setStpInstancePortProfile: sleStpInstancePortControlIndex sleStpInstancePortControlInstanceId sleStpInstancePortControlPathcost sleStpInstancePortControlPriority
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setStpInstancePortProfile(1)

sleStpInstancePortControlStatus		1.3.6.1.4.1.6296.101.3.7.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleStpInstancePortControlTimer		1.3.6.1.4.1.6296.101.3.7.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleStpInstancePortControlTimeStamp		1.3.6.1.4.1.6296.101.3.7.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleStpInstancePortControlReqResult		1.3.6.1.4.1.6296.101.3.7.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleStpInstancePortControlIndex		1.3.6.1.4.1.6296.101.3.7.2.6
sleStpInstancePortIndex
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

sleStpInstancePortControlInstanceId		1.3.6.1.4.1.6296.101.3.7.2.7
sleStpInstanceId
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..4096

sleStpInstancePortControlPathcost		1.3.6.1.4.1.6296.101.3.7.2.8
The path cost of the Designated Port of the segment connected to this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..200000000

sleStpInstancePortControlPriority		1.3.6.1.4.1.6296.101.3.7.2.9
The STP port priority.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

sleStpInstancePortControlRootGuardMode		1.3.6.1.4.1.6296.101.3.7.2.10
Enable or disable RootGuard capability on this port. This configuration will be applied to the VLAN or MSTP instance in which this port exists.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

sleStpInstancePortNotification		1.3.6.1.4.1.6296.101.3.7.3
OBJECT IDENTIFIER

sleStpInstancePortProfileChanged		1.3.6.1.4.1.6296.101.3.7.3.1

Status: current	Access: read-write
NOTIFICATION-TYPE

sleSubnetVlan		1.3.6.1.4.1.6296.101.3.8
OBJECT IDENTIFIER

sleSubnetVlanTable		1.3.6.1.4.1.6296.101.3.8.1
subnet vlan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleSubnetVlanEntry

sleSubnetVlanEntry		1.3.6.1.4.1.6296.101.3.8.1.1
key: sleSubnetVlanIp, sleSubnetVlanMask
Status: current	Access: not-accessible
OBJECT-TYPE
	SleSubnetVlanEntry

sleSubnetVlanIp		1.3.6.1.4.1.6296.101.3.8.1.1.1
Ip address of Subnet
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

sleSubnetVlanMask		1.3.6.1.4.1.6296.101.3.8.1.1.2
Mask bit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..32

sleSubnetVlanVid		1.3.6.1.4.1.6296.101.3.8.1.1.3
Index of the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4094

sleSubnetVlanControl		1.3.6.1.4.1.6296.101.3.8.2
OBJECT IDENTIFIER

sleSubnetVlanControlRequest		1.3.6.1.4.1.6296.101.3.8.2.1
createSubnetVlan: sleSubnetVlanControlPortIndex sleSubnetVlanControlIp sleSubnetVlanControlMask sleSubnetVlanControlVid destorySubnetVlan: sleSubnetVlanControlPortIndex
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	createSubnetVlan(1), destorySubnetVlan(2)

sleSubnetVlanControlStatus		1.3.6.1.4.1.6296.101.3.8.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleSubnetVlanControlTimer		1.3.6.1.4.1.6296.101.3.8.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleSubnetVlanControlTimeStamp		1.3.6.1.4.1.6296.101.3.8.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleSubnetVlanControlReqResult		1.3.6.1.4.1.6296.101.3.8.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleSubnetVlanControlIp		1.3.6.1.4.1.6296.101.3.8.2.6
IP address
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sleSubnetVlanControlMask		1.3.6.1.4.1.6296.101.3.8.2.7
Mask bit
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..32

sleSubnetVlanControlVid		1.3.6.1.4.1.6296.101.3.8.2.8
Vlan's ID
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleSubnetVlanNotification		1.3.6.1.4.1.6296.101.3.8.3
OBJECT IDENTIFIER

sleSubnetVlanCreated		1.3.6.1.4.1.6296.101.3.8.3.1

Status: current	Access: read-write
NOTIFICATION-TYPE

sleSubnetVlanDestroyed		1.3.6.1.4.1.6296.101.3.8.3.2

Status: current	Access: read-write
NOTIFICATION-TYPE

sleProtocolVlan		1.3.6.1.4.1.6296.101.3.9
OBJECT IDENTIFIER

sleProtocolVlanTable		1.3.6.1.4.1.6296.101.3.9.1
protocol vlan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleProtocolVlanEntry

sleProtocolVlanEntry		1.3.6.1.4.1.6296.101.3.9.1.1
key: sleBridgePortIndex, sleProtocolVlanEtype
Status: current	Access: not-accessible
OBJECT-TYPE
	SleProtocolVlanEntry

sleProtocolVlanEtype		1.3.6.1.4.1.6296.101.3.9.1.1.1
Ethernet type
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

sleProtocolVlanVid		1.3.6.1.4.1.6296.101.3.9.1.1.2
Index of the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4094

sleProtocolVlanControl		1.3.6.1.4.1.6296.101.3.9.2
OBJECT IDENTIFIER

sleProtocolVlanControlRequest		1.3.6.1.4.1.6296.101.3.9.2.1
createProtocolVlan: sleProtocolVlanControlPortIndex sleProtocolVlanControlEtype sleProtocolVlanControlVid destoryProtocolVlan: sleProtocolVlanControlPortIndex
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	createProtocolVlan(1), destoryProtocolVlan(2)

sleProtocolVlanControlStatus		1.3.6.1.4.1.6296.101.3.9.2.2
The status of a user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleProtocolVlanControlTimer		1.3.6.1.4.1.6296.101.3.9.2.3
The maximum wait time for the manager for a long running user command.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleProtocolVlanControlTimeStamp		1.3.6.1.4.1.6296.101.3.9.2.4
The time stamp of the last command (end of command).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleProtocolVlanControlReqResult		1.3.6.1.4.1.6296.101.3.9.2.5
The result of the last user command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleProtocolVlanControlPortIndex		1.3.6.1.4.1.6296.101.3.9.2.6
sleBridgePortIndex, sleProtocolVlanEtype
Status: current	Access: read-write
OBJECT-TYPE
	InterfaceIndex

sleProtocolVlanControlEtype		1.3.6.1.4.1.6296.101.3.9.2.7
Ethernet Type
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

sleProtocolVlanControlVid		1.3.6.1.4.1.6296.101.3.9.2.8
sleProtocolVlanControlVid
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4094

sleProtocolVlanNotification		1.3.6.1.4.1.6296.101.3.9.3
OBJECT IDENTIFIER

sleProtocolVlanCreated		1.3.6.1.4.1.6296.101.3.9.3.1

Status: current	Access: read-write
NOTIFICATION-TYPE

sleProtocolVlanDestroyed		1.3.6.1.4.1.6296.101.3.9.3.2

Status: current	Access: read-write
NOTIFICATION-TYPE

sleLag		1.3.6.1.4.1.6296.101.3.10
OBJECT IDENTIFIER

sleLagTable		1.3.6.1.4.1.6296.101.3.10.1
lag table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleLagEntry

sleLagEntry		1.3.6.1.4.1.6296.101.3.10.1.1
key: sleLagIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleLagEntry

sleLagIndex		1.3.6.1.4.1.6296.101.3.10.1.1.1
This value assigned to the aggregation ID.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..13

sleLagPortId		1.3.6.1.4.1.6296.101.3.10.1.1.2
Port ID of aggregation.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

sleLagDistMode		1.3.6.1.4.1.6296.101.3.10.1.1.3
This value assigned to the distributing mode of link aggregation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), srcmac(1), dstmac(2), srcdstmac(3), srcip(4), dstip(5), srcdstip(6), srcdstl4(7), label(80)

sleLagPortMap		1.3.6.1.4.1.6296.101.3.10.1.1.4
The value assigned to the port list of the aggregation.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleLagMode		1.3.6.1.4.1.6296.101.3.10.1.1.5
The operation mode of link aggregation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(0), trunk(1), lacp(2)

sleLagLeastActive		1.3.6.1.4.1.6296.101.3.10.1.1.6
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sleLagControl		1.3.6.1.4.1.6296.101.3.10.2
OBJECT IDENTIFIER

sleLagControlRequest		1.3.6.1.4.1.6296.101.3.10.2.1
The MIB object for the user command..
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	setLagProfile(1), setLagProfileActiveLink(2)

sleLagControlStatus		1.3.6.1.4.1.6296.101.3.10.2.2
Describes the status of a user command group, used for block commands while a command execution in process.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlStatusType

sleLagControlTimer		1.3.6.1.4.1.6296.101.3.10.2.3
Maximum command duration time in case of long running
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

sleLagControlTimeStamp		1.3.6.1.4.1.6296.101.3.10.2.4
Command result attribute
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

sleLagControlReqResult		1.3.6.1.4.1.6296.101.3.10.2.5
Time stamp attribute set at end of command.
Status: current	Access: read-only
OBJECT-TYPE
	SleControlRequestResultType

sleLagControlIndex		1.3.6.1.4.1.6296.101.3.10.2.6
This value assigned to the aggregation ID.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

sleLagControlDistMode		1.3.6.1.4.1.6296.101.3.10.2.7
This value assigned to the distributing mode of link aggregation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	srcmac(1), dstmac(2), srcdstmac(3), srcip(4), dstip(5), srcdstip(6), srcdstl4(7), label(80)

sleLagControlPortMap		1.3.6.1.4.1.6296.101.3.10.2.8
Port ID of aggregation.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleLagControlMode		1.3.6.1.4.1.6296.101.3.10.2.9
The operation mode of link aggregation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	trunk(1), lacp(2)

sleLagControlLeastActive		1.3.6.1.4.1.6296.101.3.10.2.10
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

sleLagNotification		1.3.6.1.4.1.6296.101.3.10.3
OBJECT IDENTIFIER

sleLagProfileChanged		1.3.6.1.4.1.6296.101.3.10.3.1

Status: current	Access: read-write
NOTIFICATION-TYPE

sleLagProfileActiveLinkChanged		1.3.6.1.4.1.6296.101.3.10.3.2

Status: current	Access: read-write
NOTIFICATION-TYPE

sleLagLacp		1.3.6.1.4.1.6296.101.3.11
OBJECT IDENTIFIER

sleLagLacpTable		1.3.6.1.4.1.6296.101.3.11.1
lag LACP table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SleLagLacpEntry

sleLagLacpEntry		1.3.6.1.4.1.6296.101.3.11.1.1
key: sleLagLacpIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SleLagLacpEntry

sleLagLacpIndex		1.3.6.1.4.1.6296.101.3.11.1.1.1
Location of authentication.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..13

sleLagLacpActorAggregatorKey		1.3.6.1.4.1.6296.101.3.11.1.1.2
The kind of authentication.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

sleLagLacpActorSystemMAC		1.3.6.1.4.1.6296.101.3.11.1.1.3
The Actor's System ID, encoded as a MAC address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

sleLagLacpPartnerSystemMAC		1.3.6.1.4.1.6296.101.3.11.1.1.4
Enable or disable the corresponding authen method.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sleLagLacpPartnerSystemPriority		1.3.6.1.4.1.6296.101.3.11.1.1.5
The primary priority of the corresponding authen method.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

sleLagLacpPartnerAggregatorKey		1.3.6.1.4.1.6296.101.3.11.1.1.6

Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

sleLagLacpStats		1.3.6.1.4.1.6296.101.3.11.2
OBJECT IDENTIFIER

sleLagLacpStatsPduReceived		1.3.6.1.4.1.6296.101.3.11.2.1
The received LACP PDUs
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

sleLagLacpStatsPduReceivedErrrors		1.3.6.1.4.1.6296.101.3.11.2.2
The received LACP PDUs
Status: current	Access: read-only
OBJECT-TYPE