SIAE-SAFE-MODE-MIB
File:
SIAE-SAFE-MODE-MIB.mib (5587 bytes)
Imported modules
Imported symbols
Defined Values
safeMode |
1.3.6.1.4.1.3373.1103.99 |
Management information for safe mode.
|
MODULE-IDENTITY |
|
|
|
safeModeMibVersion |
1.3.6.1.4.1.3373.1103.99.1 |
Numerical version of this module.
The string version of this MIB have the following format:
XX.YY.ZZ
so, for example, the value 1 should be interpreted as 00.00.01
and the value 10001 should be interpreted as 01.00.01. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
safeModeAlarm |
1.3.6.1.4.1.3373.1103.99.2 |
Safe mode alarm with associated severity. This object
indicates that the equipment is in safe mode.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmStatus |
|
|
safeModeAlarmSeverityCode |
1.3.6.1.4.1.3373.1103.99.3 |
Defines the severity associated to the safeModeAlarm
and enables/disables the trap generation on status change event.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
AlarmSeverityCode |
|
|
safeModeStatus |
1.3.6.1.4.1.3373.1103.99.4 |
The safe mode status of the equipment.
Equipment in normal-mode has safe mode status inactive |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
safeModeStatusInactive(1), safeModeStatusNoAuxService(2), safeModeStatusLinkMngmt(3), safeModeStatusSiteMngmt(4), safeModeStatusSiteDefault(5), safeModeStatusSiteRescue(6) |
|
safeModeRescueAdminStatus |
1.3.6.1.4.1.3373.1103.99.5 |
This object enables or disables the site-rescue . |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disable(1), enable(2) |
|
safeModeRescuePwd |
1.3.6.1.4.1.3373.1103.99.6 |
This object specifies the login password of the rescue
user. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
safeModeRescueIpNetMask |
1.3.6.1.4.1.3373.1103.99.8 |
The subnet Mask associated with the Rescue IP address.
The value of the Mask is an IP address with all the network bits set to 1
and all the hosts bits set to 0. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|