SIAE-CFGM-MIB
File:
SIAE-CFGM-MIB.mib (11857 bytes)
Imported modules
Imported symbols
Defined Values
configManagement |
1.3.6.1.4.1.3373.1103.30 |
Backup and Restore (Configuration management) of the NE
|
MODULE-IDENTITY |
|
|
|
configManagementMibVersion |
1.3.6.1.4.1.3373.1103.30.1 |
Numerical version of this module.
The string version of this MIB have the following format:
XX.YY.ZZ
so, for example, the value 1 should be interpreted as 00.00.01
and the value 10001 should be interpreted as 01.00.01. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
configManagementFileName |
1.3.6.1.4.1.3373.1103.30.2 |
Name of the file, containing the equipment configuration, to
upload or download according to the object configManagementAction |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
configManagementServerIpAddress |
1.3.6.1.4.1.3373.1103.30.3 |
Ip address of the SNMP manager connected from/to which the
configuration is downloaded/uploaded,
if this object is set '0.0.0.0', then the IP address of server
is read from incoming ethernet packet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configManagementAction |
1.3.6.1.4.1.3373.1103.30.4 |
Action requested to the equipment:
- configNone: no action required;
- configSave: the current equipment configuration will be saved
in the file whose name is written in the leaf
configurationFileName through FTP protocol;
- configUse: the configuration file, whose name is written in
the leaf configurationFileName, will be transfer-
red on the target through FTP protocol and it will
be used after an implicit restart of the equip-
ment.
A copy of the current equipment configuration will
be saved on the equipment filesystem in order to
return to it.
- configBack: the equipment configuration, saved during a
config-use action will be used after an implicit
restart of the equipment.
- configAbort: the action in progress will be interrupted.
- configBackAndSwich: the equipment configuration, saved during a
config-use action will be used after an implicit
bench switch of the equipment.
The value of this object is self cleared (reset to the value
configNone) after its use.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
configNone(0), configSave(1), configUse(2), configBack(3), configAbort(4), configUseAndSwitch(5) |
|
configManagementState |
1.3.6.1.4.1.3373.1103.30.5 |
Action in progess state:
- configCompleted: the action required has been successfully
completed;
- configInterrupted: the action required has been abnormally
stopped;
- configVerifying: the downloaded configuration is being checked
if it is suitable for the equipment;
- configSaving: current configuration is being saved to be
tranferred to the manager;
- configUploading: the current configuration is being transfer-
red to the manager;
- configDownloading: a configuration file is being transferred
from the manager to the equipment;
- configUsing: the current configuration is being overwrit-
ten with the downloaded one or with the
previously saved one;
- configMaking-copy: a copy of the current configuration is being
saved to eventually return to it;
- configAborting: the current action is being aborted as requi-
red by the config-abort action.
- configRestarting: the equipment is restarting.
- configStarted: the action required has been started;
A trap is sent at every change of the object value. When the status
become configStarted, the sent trap notifies the start of the
required action.
When the status become configCompleted or config-interrupted, the
sent trap notifies a successfully or an abnormal end of the action
in progress. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
configCompleted(1), configInterrupted(2), configVerifying(3), configSaving(4), configDownloading(5), configUploading(6), configUsing(7), configMakingCopy(8), configAborting(9), configRestarting(10), configStarted(11) |
|
configManagementFailure |
1.3.6.1.4.1.3373.1103.30.6 |
The value of this object identifies the configuration upload/
download state in which errors have been detected. The value
config-aborted means interrupted by user. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
configNoFailure(0), configVerifying(3), configSaving(4), configDownloading(5), configUploading(6), configUsing(7), configMakingCopy(8), configAborted(9) |
|
configManagementBackupFileDate |
1.3.6.1.4.1.3373.1103.30.7 |
Date and time of the previous configuration file saved by the
config-use action. The value of this object is expressed as the
number of seconds since the midnight of 1/1/1970. A zero value
means no previous configuration file has been created. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
configManagementTrapNotification |
1.3.6.1.4.1.3373.1103.30.8 |
Enable/disable the trap generation on configuration tranfer
operation |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
trapDisable(1), trapEnable(2) |
|
configManagementFtpStatusTrap |
1.3.6.1.4.1.3373.1103.0.3001 |
This event is generated by ALCP2E-NE when the status of configuration
transfer is changed.
The data passed with the event are:
1) equipIpSnmpAgentAddress
2) configurationState
3) configurationFailure |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|