SHE-PTP-MIB

File: SHE-PTP-MIB.mib (59858 bytes)

Imported modules

AN-MIB SHE-ALARMING-MIB SHE-TC-MIB
SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

she sheAlarmTimeAndDate sheAlarmReportingSource
sheAlarmReportingSourceType sheAlarmSeverity SheAlarmSevProfileIndex
SheControlStatusType SnmpAdminString OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP Integer32
Unsigned32 Gauge32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE TruthValue
TEXTUAL-CONVENTION

Defined Types

ShePtpControlRequestType  
INTEGER noRequest(1), setPtpDefaultDataSet(10), setPtpPortConfigDataSet(11), createPtpAcceptableMasterTableEntry(12), modifyPtpAcceptableMasterTableEntry(13), deletePtpAcceptableMasterTableEntry(14), createPtpUnicastDiscoveryMasterTableEntry(15), modifyPtpUnicastDiscoveryMasterTableEntry(16), deletePtpUnicastDiscoveryMasterTableEntry(17)    

ShePtpControlRequestResultType  
INTEGER noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37)    

ShePtpEnableType  
Used for show adminState of PTP subsystem in NE.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

ShePtpPortDSDelayMechanismType  
Description.
TEXTUAL-CONVENTION    
  INTEGER end2End(1)  

ShePtpAcceptableMasterNetworkProtocolType  
Description.
TEXTUAL-CONVENTION    
  INTEGER ipUdp(1)  

ShePtpUnicastDiscoveryMasterIndexType  
Description.
TEXTUAL-CONVENTION    
  Unsigned32 1..10  

ShePtpUnicastDiscoveryMasterRateType  
Description.
TEXTUAL-CONVENTION    
  INTEGER use128msgs(-7), use64msgs(-6), use32msgs(-5), use16msgs(-4), use8msgs(-3), use4msgs(-2), use2msgs(-1), use1msgs(0)  

ShePtpAcceptableMasterSyncStateType  
used to show the status of configured acceptable master clocks.
TEXTUAL-CONVENTION    
  INTEGER freerun(1), holdover(2), acquiring(3), acquired(4)  

ShePtpPortDSIntervalType  
Used to configure SyncInterval and ReqInterval in portDS.
TEXTUAL-CONVENTION    
  Integer32 -7..1  

ShePtpPortDataSetEntry  
SEQUENCE    
  shePtpPortDSPortNumber Integer32
  shePtpPortDSClockIdentity OCTET STRING
  shePtpPortDSDelayMechanism ShePtpPortDSDelayMechanismType
  shePtpPortDSAcceptableMasterEnabled TruthValue
  shePtpPortDSUnicastNegotiationEnabled TruthValue
  shePtpPortDSUnicastNegotiationDuration Integer32
  shePtpPortDSUnicastLogQueryInterval Integer32
  shePtpPortDSVlanId Integer32
  shePtpPortDSLogMeanSyncInterval ShePtpPortDSIntervalType
  shePtpPortDSLogMinMeanDelayReqInterval ShePtpPortDSIntervalType
  shePtpPortDSLogMeanAnnounceInterval Integer32
  shePtpPortDSAnnounceReceiptTimeout Integer32
  shePtpPortDSLogMinPdelayReqInterval Integer32
  shePtpPortDSAlarmSeverityIndex SheAlarmSevProfileIndex

ShePtpForeignMasterDataSetEntry  
SEQUENCE    
  shePtpForeignMasterDSIndex Unsigned32
  shePtpForeignMasterDSNumberForeignRecords Integer32
  shePtpForeignMasterDSClockIdentity OCTET STRING
  shePtpForeignMasterDSPortNumber Integer32
  shePtpForeignMasterDSAnnounceMessages Unsigned32
  shePtpForeignMasterDSNetworkProtocol ShePtpAcceptableMasterNetworkProtocolType
  shePtpForeignMasterDSProtocolAddressLength Integer32
  shePtpForeignMasterDSProtocolAddress OCTET STRING

ShePtpAcceptableMasterEntry  
SEQUENCE    
  shePtpAcceptableMasterIndex Unsigned32
  shePtpAcceptableMasterNetworkProtocol ShePtpAcceptableMasterNetworkProtocolType
  shePtpAcceptableMasterProtocolAddressLength Integer32
  shePtpAcceptableMasterProtocolAddress OCTET STRING
  shePtpAcceptableMasterPriority Integer32
  shePtpAcceptableMasterUnicast TruthValue
  shePtpAcceptableMasterMinTimingPktSize Integer32
  shePtpAcceptableMasterSyncStatus ShePtpAcceptableMasterSyncStateType

ShePtpUnicastDiscoveryMasterEntry  
SEQUENCE    
  shePtpUnicastDiscoveryMasterIndex ShePtpUnicastDiscoveryMasterIndexType
  shePtpUnicastDiscoveryMasterNetworkProtocol ShePtpAcceptableMasterNetworkProtocolType
  shePtpUnicastDiscoveryMasterProtocolAddressLength Integer32
  shePtpUnicastDiscoveryMasterProtocolAddress OCTET STRING

Defined Values

shePtpMIB 1.3.6.1.4.1.231.7.1.2.1.22
This MIB based on ptp-Mib proposal from IEEE1588 workin group. Management Information Base module for PTP configuration, default dataset, current dataset, parent dataset, global time proporties dataset, foreign dataset and port configuration dataset components. New supported with R3.7M.
MODULE-IDENTITY    

shePtpObjects 1.3.6.1.4.1.231.7.1.2.1.22.1
OBJECT IDENTIFIER    

shePtpBase 1.3.6.1.4.1.231.7.1.2.1.22.1.1
OBJECT IDENTIFIER    

shePtpAdminState 1.3.6.1.4.1.231.7.1.2.1.22.1.1.1
Enable or disable the Precision Time Protocol on this node. The default value is disabled. Note: SHE system will enable/disable the PTP subsystem via a configuration command in sheSyncMib. This will force an switchover between the system default sync module, which could use T3 or BITS or syncEthernet as sync sources configured and controled via sheSyncMib, and the PTP sync module configured and controled via this shePtpMib module. A modification will only be supported if CXU_B3 is used! All other CXU versions are not able to support timing over packet feature!
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpEnableType  

shePtpManufacturerIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.1.2
The value of manufacturerIdentity shall be an OUI owned by the manufacturer of the node.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

shePtpRevisionData 1.3.6.1.4.1.231.7.1.2.1.22.1.1.3
Indication of the revisions for node hardware (HW), firmware (FW), and software (SW). This information shall be semicolon (;) separated (HW;FW;SW).
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

shePtpClockType 1.3.6.1.4.1.231.7.1.2.1.22.1.1.4
ClockType as defined in the CLOCK_DESCRIPTION management message. Indication of the PTP node type. A TRUE value of a bit in the clockType field indicates that the description applies to the node. 0 - ordinary clock 1 - boundary clock 2 - peer-to-peer transparent clock 3 - end-to-end transparent clock 4 - management node 5..0xF - Reserved
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

shePtpVersion 1.3.6.1.4.1.231.7.1.2.1.22.1.1.5
Version number of supported IEEE1588 release.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shePtpDefaultDataSet 1.3.6.1.4.1.231.7.1.2.1.22.1.2
OBJECT IDENTIFIER    

shePtpDefaultDSInitializable 1.3.6.1.4.1.231.7.1.2.1.22.1.2.1
The clock can be reinitialized by a management message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

shePtpDefaultDSTwoStepFlag 1.3.6.1.4.1.231.7.1.2.1.22.1.2.2
Use Follow Up messages or not. Using Follow Up will increase PTP packet rate (2x Sync rate) and CPU load!
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

shePtpDefaultDSIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.2.3
The clockIdentity is an 8 octet (byte) array. The value range of each octet is 0..0xFF.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

shePtpDefaultDSNumberPorts 1.3.6.1.4.1.231.7.1.2.1.22.1.2.4
Number of available PTP port's in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1  

shePtpDefaultDSClass 1.3.6.1.4.1.231.7.1.2.1.22.1.2.5
clockClass attribute of this ordinary slave-only clock. Default value is 255.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpDefaultDSAccuracy 1.3.6.1.4.1.231.7.1.2.1.22.1.2.6
Part of default dataset clockQuality struct. Characterizes a clock for the purpose of the best master clock (BMC) algorithm. This is an enum value as defined in clause 7.6.2.5, table 6 of IEEE1588-2008 standard. clockAccuracy is related to the time source and holdover specifications of this clock
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpDefaultDSVariance 1.3.6.1.4.1.231.7.1.2.1.22.1.2.7
offsetScaledLogVariance defaultDS member, it is an attribute defining the stability of a clock. This is the precision of the timestamps included in messages issued by the clock when it is not synchronized to another clock using the protocol. The representation is described in clause 7.6.3.3 of IEEE1588-2008 standard.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

shePtpDefaultDSPriority1 1.3.6.1.4.1.231.7.1.2.1.22.1.2.8
priority1 attribute of this PTP clock. This attribute is used in the execution of the best master clock algorithm, if BMC is used. However in this PTP slave clock implementation SLAVE_ONLY mode is used and priority1 is meaningless in respect of BMC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

shePtpDefaultDSPriority2 1.3.6.1.4.1.231.7.1.2.1.22.1.2.9
priority2 attribute of this PTP clock. This attribute is used in the execution of the best master clock algorithm, if BMC is used. However in this PTP slave clock implementation SLAVE_ONLY mode is used and priority2 is meaningless in respect of BMC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpDefaultDSDomainNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.2.10
A domain number specifying the scope of PTP message communication, state, operations, data sets and timescale. 0 - default 1 - alternate domain 1 2 - alternate domain 2 3 - alternate domain 3 4..127 - user-defined 128..255 - reserved
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpDefaultDSSlaveOnly 1.3.6.1.4.1.231.7.1.2.1.22.1.2.11
Set to TRUE during initialization and not allowed to be changed as this is a slave-only clock.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

shePtpDefaultDataSetControl 1.3.6.1.4.1.231.7.1.2.1.22.1.3
OBJECT IDENTIFIER    

shePtpDefaultDSControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.3.1
setPtpDefaultDataSet (10): shePtpDefaultDSControlInitializable shePtpDefaultDSControlTwoStepFlag shePtpDefaultDSControlIdentity shePtpDefaultDSControlPriority1 shePtpDefaultDSControlPriority2 shePtpDefaultDSControlDomainNumber
Status: current Access: read-write
OBJECT-TYPE    
  ShePtpControlRequestType  

shePtpDefaultDSControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.3.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shePtpDefaultDSControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.3.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shePtpDefaultDSControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.3.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpControlRequestResultType  

shePtpDefaultDSControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.3.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shePtpDefaultDSControlInitializable 1.3.6.1.4.1.231.7.1.2.1.22.1.3.6
look at group.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

shePtpDefaultDSControlTwoStepFlag 1.3.6.1.4.1.231.7.1.2.1.22.1.3.7
look at group.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

shePtpDefaultDSControlIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.3.8
look at group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

shePtpDefaultDSControlPriority1 1.3.6.1.4.1.231.7.1.2.1.22.1.3.9
look at group.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

shePtpDefaultDSControlPriority2 1.3.6.1.4.1.231.7.1.2.1.22.1.3.10
look at group.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

shePtpDefaultDSControlDomainNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.3.11
look at group. Range 128...255 is reserved.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..127  

shePtpCurrentDataSet 1.3.6.1.4.1.231.7.1.2.1.22.1.4
OBJECT IDENTIFIER    

shePtpCurrentDataSetStepsRemoved 1.3.6.1.4.1.231.7.1.2.1.22.1.4.1
The number of communication paths traversed between the local clock and the grandmaster clock.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shePtpCurrentDataSetOffsettFromMasterSeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.2
Implementation-specific current value of the time difference between a master and a slave as computed by the slave in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shePtpCurrentDataSetOffsettFromMasterNanoSeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.3
Implementation-specific current value of the time difference between a master and a slave as computed by the slave in nano-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..999999999  

shePtpCurrentDataSetMeanPathDelaySeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.4
Implementation-specific current value of the mean propagation time between a master and slave clock as computed by the slave in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shePtpCurrentDataSetMeanPathDelayNanoSeconds 1.3.6.1.4.1.231.7.1.2.1.22.1.4.5
Implementation-specific current value of the mean propagation time between a master and slave clock as computed by the slave in nano-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..999999999  

shePtpParentDataSet 1.3.6.1.4.1.231.7.1.2.1.22.1.5
OBJECT IDENTIFIER    

shePtpParentClockIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.5.1
Identifies parent clock this slave clock is synchronized to. The clockIdentity is an 8 octet (byte) array. The value range of each octet is 0..0xFF.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

shePtpParentClockPortNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.5.2
Port number of master clock to which this clock synchronizes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shePtpParentGrandmasterIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.5.3
ClockIdentity attribute of the grandmaster clock.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

shePtpParentGrandmasterClockClass 1.3.6.1.4.1.231.7.1.2.1.22.1.5.4
Part of grandmaster clock quality struct.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpParentGrandmasterClockAccuracy 1.3.6.1.4.1.231.7.1.2.1.22.1.5.5
Part of grandmaster clock quality struct.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpParentGrandmasterClockVariance 1.3.6.1.4.1.231.7.1.2.1.22.1.5.6
Part of grandmaster clock quality struct.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

shePtpParentGrandmasterPriority1 1.3.6.1.4.1.231.7.1.2.1.22.1.5.7
Priority1 attribute of the grandmaster clock.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpParentGrandmasterPriority2 1.3.6.1.4.1.231.7.1.2.1.22.1.5.8
Priority2 attribute of the grandmaster clock.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpPortDataSetTable 1.3.6.1.4.1.231.7.1.2.1.22.1.6
The table containing Port Data Set entries for each port of this clock. For the single port of this clock, ShePtpPortDataSetEntry is maintained as the basis for protocol decisions and providing values for message fields. The number of the table entries is the value of shePtpDefaultDSNumberPorts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ShePtpPortDataSetEntry

shePtpPortDataSetEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1
PTP configuration information for a particular port.
Status: current Access: not-accessible
OBJECT-TYPE    
  ShePtpPortDataSetEntry  

shePtpPortDSPortNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.1
The value of the portNumber for a port on a PTP node supporting a single PTP port shall be 1. The values of the port numbers for the N ports on a PTP node supporting N PTP ports shall be 1, 2, ..N, respectively
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1  

shePtpPortDSClockIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.2
PortIdentity attribute of the local port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

shePtpPortDSDelayMechanism 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.3
Indication of the propagation delay measuring option used by the port in computing shePtpCurrentDataSetMeanPathDelay*. Possible values: E2E (0x01) - The port is configured to use the delay request-response mechanism; P2P (0x02) - The port is configured to use the peer delay mechanism; DISABLED (0xFE) - The port does not implement the delay mechanism.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpPortDSDelayMechanismType  

shePtpPortDSAcceptableMasterEnabled 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.4
Enable/Disable the usage of acceptableMasterTable. The Acceptable Master Table is always used and this attribute value is always TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

shePtpPortDSUnicastNegotiationEnabled 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.5
This atrribute determines if the message negotiation is used (TRUE) or not (FALSE) in case unicast communications is used, for any master clock entered in the acceptableMasterTable. This is a global flag to enable/disable unicast negotiation. This flag must be set to true and an entry added to the acceptableMasterTable and the discoveryMasterTable for autonegotiation to be started with given master clock.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

shePtpPortDSUnicastNegotiationDuration 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.6
The duration in seconds for which to request unicast contracts. Only relevant for negotiated unicast streams, i.e. to the master clocks which port addresses are present in the shePtpUnicastDiscoveryMasterTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 10..1000  

shePtpPortDSUnicastLogQueryInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.7
The log to the base 2 value of the request rate (per second) when trying to establish a unicast contract with a remote master device (when it does not respond immediately).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..4  

shePtpPortDSVlanId 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.8
ID of VLAN used for PTP traffic. This configuration is only a reference to used VLAN - no explicite Vlan create configuration in the NE will be forced by this setting. The interface configuration including IpAddress, SubnetMask and Vlan has to be made via general sheSystemIpHostTable configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

shePtpPortDSLogMeanSyncInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.9
The interval to use for multicast sync messages on this port. This is log2(1/Sync packet rate) PTP version 2.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpPortDSIntervalType  

shePtpPortDSLogMinMeanDelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.10
In PTP v2 for a slave device this is the preferred interval to be used for transmitting delay request messages but is subject to any minimum specified by the master. Logarithm to the base 2 of the minDelayReqInterval.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpPortDSIntervalType  

shePtpPortDSLogMeanAnnounceInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.11
The interval to use for multicast announce messages on this port. This is log to the base 2 of the Announce message rate (per second).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4  

shePtpPortDSAnnounceReceiptTimeout 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.12
The timeout period, in announce message intervals, within which at least one announce message must be received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..10  

shePtpPortDSLogMinPdelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.13
The minimum permitted mean time interval between successive Pdelay_Req messages. By default this attribute is initialized to the value of shePtpPortDSLogMeanSyncInterval. This is log to the base 2 of the Pdelay_req message rate (per second).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..5  

shePtpPortDSAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.6.1.14
This index selects an item in the sheAlarmSeverityProfileTable. It is used to assign the reported alarm to a severity.
Status: current Access: read-only
OBJECT-TYPE    
  SheAlarmSevProfileIndex  

shePtpPortDataSetControl 1.3.6.1.4.1.231.7.1.2.1.22.1.7
OBJECT IDENTIFIER    

shePtpPortDataSetControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.7.1
setPtpPortConfigDataSet (11): shePtpPortDataSetControlIndex shePtpPortDataSetControlUnicastNegotiationEnabled shePtpPortDataSetControlUnicastNegotiationDuration shePtpPortDataSetControlUnicastLogQueryInterval shePtpPortDataSetControlVlanId shePtpPortDataSetControlLogMeanSyncInterval shePtpPortDataSetControlLogMinMeanDelayReqInterval shePtpPortDataSetControlLogMeanAnnounceInterval shePtpPortDataSetControlAnnounceReceiptTimeout shePtpPortDataSetControlLogMinPdelayReqInterval shePtpPortDataSetControlAlarmSeverityIndex
Status: current Access: read-write
OBJECT-TYPE    
  ShePtpControlRequestType  

shePtpPortDataSetControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.7.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shePtpPortDataSetControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.7.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shePtpPortDataSetControlControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.7.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpControlRequestResultType  

shePtpPortDataSetControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.7.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shePtpPortDataSetControlIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.7.6
The index of port DS for configuration.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1  

shePtpPortDataSetControlUnicastNegotiationEnabled 1.3.6.1.4.1.231.7.1.2.1.22.1.7.7
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

shePtpPortDataSetControlUnicastNegotiationDuration 1.3.6.1.4.1.231.7.1.2.1.22.1.7.8
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..1000  

shePtpPortDataSetControlUnicastLogQueryInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.9
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..4  

shePtpPortDataSetControlVlanId 1.3.6.1.4.1.231.7.1.2.1.22.1.7.10
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093  

shePtpPortDataSetControlLogMeanSyncInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.11
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  ShePtpPortDSIntervalType  

shePtpPortDataSetControlLogMinMeanDelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.12
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  ShePtpPortDSIntervalType  

shePtpPortDataSetControlLogMeanAnnounceInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.13
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4  

shePtpPortDataSetControlAnnounceReceiptTimeout 1.3.6.1.4.1.231.7.1.2.1.22.1.7.14
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..10  

shePtpPortDataSetControlLogMinPdelayReqInterval 1.3.6.1.4.1.231.7.1.2.1.22.1.7.15
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..5  

shePtpPortDataSetControlAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.7.16
look at table
Status: current Access: read-write
OBJECT-TYPE    
  SheAlarmSevProfileIndex  

shePtpForeignMasterDataSetTable 1.3.6.1.4.1.231.7.1.2.1.22.1.8
This table is maintained for the purpose of qualifying Announce messages, it is used by best master clock algorithm. There will be an entry dynamically created in the table for each master clock from which Announce messages are received on corresponding (shePtpPortDSPortNumber) clock port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ShePtpForeignMasterDataSetEntry

shePtpForeignMasterDataSetEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1
PTP configuration information for a particular port.
Status: current Access: not-accessible
OBJECT-TYPE    
  ShePtpForeignMasterDataSetEntry  

shePtpForeignMasterDSIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.1
Second Index for table, Count of foreign master entries on a port. Foreign Master Data set shall have a minimum capacity of 5 foreign master records
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..10  

shePtpForeignMasterDSNumberForeignRecords 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.2
Count of foreign clock records on a port. This equals to the actual number of foreign clocks from which Announce messages are received. Table shall have a minimum capacity of 5 foreign master records.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..5  

shePtpForeignMasterDSClockIdentity 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.3
Part of the sourcePortIdentity field value of an Announce message received from the foreign master.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

shePtpForeignMasterDSPortNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.4
Part of the sourcePortIdentity field value of an Announce message received from the foreign master.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

shePtpForeignMasterDSAnnounceMessages 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.5
The number of Announce messages from the foreign master indicated by the shePtpForeignMasterDSClockIdentity and shePtpForeignMasterDSPortNumber (foreignMasterPortIdentity) that have been received within a time window of duration 4 * shePtpPortDSLogMeanAnnounceInterval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shePtpForeignMasterDSNetworkProtocol 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.6
Supported PTP transport protocol is only IP/UDP.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpAcceptableMasterNetworkProtocolType  

shePtpForeignMasterDSProtocolAddressLength 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.7
Supported PTP transport protocol is only IP/UDP so address length is always 4.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 4  

shePtpForeignMasterDSProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.8.1.8
The IP address of the detected foreign master.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

shePtpAcceptableMasterTable 1.3.6.1.4.1.231.7.1.2.1.22.1.9
Configure acceptable master clocks entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ShePtpAcceptableMasterEntry

shePtpAcceptableMasterEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1
An entry per each PTP server to which this slave clock is allowed to synchronize. All Announce and other PTP messages sent by master clock which is not in the shePtpAcceptableMasterTable will be ignored, e.g. not considered by Best Master Clock algorithm.
Status: current Access: not-accessible
OBJECT-TYPE    
  ShePtpAcceptableMasterEntry  

shePtpAcceptableMasterIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.1
Index for table, Count of configured acceptable master entries.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..10  

shePtpAcceptableMasterNetworkProtocol 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.2
Supported PTP transport protocol is only IP/UDP.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpAcceptableMasterNetworkProtocolType  

shePtpAcceptableMasterProtocolAddressLength 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.3
Supported PTP transport protocol is only IP/UDP so address length is always 4.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 4  

shePtpAcceptableMasterProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.4
The IP address of the configured acceptable master.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

shePtpAcceptableMasterPriority 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.5
This attribute is an alternate priority to be used to determine best master clock. If shePtpAcceptableMasterPriority is 0 it shall have no effect on computation determination of best master clock. If the value of shePtpAcceptableMasterPriority is greater than 0, the value of priority1 in the Announce message from the remote port shall be replaced by the value of the shePtpAcceptableMasterPriority for purposes of determining best master clock.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpAcceptableMasterUnicast 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.6
This attribute determines the communications type used for PTP messages (unicast/multicast). It depends on destination IP address type of the packets (master clock port address or IP multicast domain). It is set to TRUE if unicast communication is used or set to FALSE if multicast addresses are used (standard PTP assigned IP multicast addresses).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

shePtpAcceptableMasterMinTimingPktSize 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.7
The minimum packet size to use for packets carrying timing information. This is the total packet size after all protocol headers have been added, but excluding the Ethernet FCS. The required packet size is achieved by adding padding bytes to the minimum timing packet size required by the PTP protocol. If the specified value is less than the minimum quired by the protocol it will be ignored. Hence specifying zero will always use the standard packet size - no padding will be added to the PTP messages.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

shePtpAcceptableMasterSyncStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.9.1.8
This parameter show the clock recovery algorithm status which is an enum of values { FREERUN, HOLDOVER, ACQUIRING, ACQUIRED }. For normal operation, i.e. when this slave clock is synchronized to any master clock that attribute will have 'ACQUIRED' value.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpAcceptableMasterSyncStateType  

shePtpAcceptableMasterControl 1.3.6.1.4.1.231.7.1.2.1.22.1.10
OBJECT IDENTIFIER    

shePtpAcceptableMasterControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.10.1
createPtpAcceptableMasterTableEntry (12): shePtpAcceptableMasterControlProtocolAddress shePtpAcceptableMasterControlPriority shePtpAcceptableMasterControlUnicast shePtpAcceptableMasterControlMinTimingPktSize modifyPtpAcceptableMasterTableEntry (13): shePtpAcceptableMasterControlIndex shePtpAcceptableMasterControlProtocolAddress shePtpAcceptableMasterControlPriority shePtpAcceptableMasterControlUnicast shePtpAcceptableMasterControlMinTimingPktSize deletePtpAcceptableMasterTableEntry (14): shePtpAcceptableMasterControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  ShePtpControlRequestType  

shePtpAcceptableMasterControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.10.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shePtpAcceptableMasterControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.10.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shePtpAcceptableMasterControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.10.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpControlRequestResultType  

shePtpAcceptableMasterControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.10.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shePtpAcceptableMasterControlIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.10.6
The index of acceptable master table entry for configuration.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

shePtpAcceptableMasterControlProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.10.7
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

shePtpAcceptableMasterControlPriority 1.3.6.1.4.1.231.7.1.2.1.22.1.10.8
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

shePtpAcceptableMasterControlUnicast 1.3.6.1.4.1.231.7.1.2.1.22.1.10.9
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

shePtpAcceptableMasterControlMinTimingPktSize 1.3.6.1.4.1.231.7.1.2.1.22.1.10.10
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

shePtpUnicastDiscoveryMasterTable 1.3.6.1.4.1.231.7.1.2.1.22.1.11
The table is used by this slave clock to start negotiation of message rates with required master clocks. It is only meaningful when unicast communications is used and shePtpPortDSUnicastNegotiationEnabled attribute of corresponding clock port is set to TRUE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ShePtpUnicastDiscoveryMasterEntry

shePtpUnicastDiscoveryMasterEntry 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1
Request, that the master identified by this antry, transmits unicast Announce, Sync and Delay_Resp messages to that slave clock will be sent. PTP message rates autonegotiation will be performed with a master identified by this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ShePtpUnicastDiscoveryMasterEntry  

shePtpUnicastDiscoveryMasterIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.1
second table Index
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpUnicastDiscoveryMasterIndexType  

shePtpUnicastDiscoveryMasterNetworkProtocol 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.2
Supported PTP transport protocol is only IP/UDP.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpAcceptableMasterNetworkProtocolType  

shePtpUnicastDiscoveryMasterProtocolAddressLength 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.3
Supported PTP transport protocol is only IP/UDP so address length is always 4.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 4  

shePtpUnicastDiscoveryMasterProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.11.1.4
Protocol address of master clock port to which this slave clock is to be sending unicast message GRANT REQUESTS, i.e. unicast discovery of the master which port address is added to the shePtpUnicastDiscoveryMasterTable shall be in effect right after an entry is added (if this address is not yet in the shePtpUnicastDiscoveryMasterTable and PTP message rates are not already negotiated). Please NOTE that the master's port address must be added in advance to the shePtpAcceptableMasterTable too.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

shePtpUnicastDiscoveryMasterControl 1.3.6.1.4.1.231.7.1.2.1.22.1.12
OBJECT IDENTIFIER    

shePtpUnicastDiscoveryMasterControlRequest 1.3.6.1.4.1.231.7.1.2.1.22.1.12.1
createPtpUnicastDiscoveryMasterTableEntry (15): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlProtocolAddress modifyPtpUnicastDiscoveryMasterTableEntry (16): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlIndex shePtpUnicastDiscoveryMasterControlProtocolAddress deletePtpUnicastDiscoveryMasterTableEntry (17): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlIndex
Status: current Access: read-write
OBJECT-TYPE    
  ShePtpControlRequestType  

shePtpUnicastDiscoveryMasterControlControlStatus 1.3.6.1.4.1.231.7.1.2.1.22.1.12.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

shePtpUnicastDiscoveryMasterControlTimer 1.3.6.1.4.1.231.7.1.2.1.22.1.12.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

shePtpUnicastDiscoveryMasterControlReqResult 1.3.6.1.4.1.231.7.1.2.1.22.1.12.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  ShePtpControlRequestResultType  

shePtpUnicastDiscoveryMasterControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.22.1.12.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

shePtpUnicastDiscoveryMasterControlPortDsNumber 1.3.6.1.4.1.231.7.1.2.1.22.1.12.6
The index 1 of unicast discovery master table entry for configuration - portDs index.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..5  

shePtpUnicastDiscoveryMasterControlIndex 1.3.6.1.4.1.231.7.1.2.1.22.1.12.7
The index 2 of unicast discovery master table.
Status: current Access: read-write
OBJECT-TYPE    
  ShePtpUnicastDiscoveryMasterIndexType  

shePtpUnicastDiscoveryMasterControlProtocolAddress 1.3.6.1.4.1.231.7.1.2.1.22.1.12.8
look at table.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

shePtpNotifications 1.3.6.1.4.1.231.7.1.2.1.22.2
OBJECT IDENTIFIER    

shePtpEvents 1.3.6.1.4.1.231.7.1.2.1.22.2.1
OBJECT IDENTIFIER    

shePtpAdminStateChanged 1.3.6.1.4.1.231.7.1.2.1.22.2.1.1
The administrative state of the PTP subsystem has changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpDefaultDataSetModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.2
Notification for successful PTP default data set configuration.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpPortConfigDataModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.3
Notification for successfull PTP port config data configuration.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpAcceptableMasterTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.22.2.1.4
Notification for successfull create of PTP acceptable master table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpAcceptableMasterTableEntryModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.5
Notification for successfull modify of PTP acceptable master table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpAcceptableMasterTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.22.2.1.6
Notification for successfull delete of PTP acceptable master table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpUnicastDiscoveryMasterTableEntryCreated 1.3.6.1.4.1.231.7.1.2.1.22.2.1.7
Notification for successfull create of PTP unicast discovery master table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpUnicastDiscoveryMasterTableEntryModified 1.3.6.1.4.1.231.7.1.2.1.22.2.1.8
Notification for successfull modify of PTP unicast discovery master table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpUnicastDiscoveryMasterTableEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.22.2.1.9
Notification for successfull delete of PTP unicast discovery master table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpForeignMasterTableChanged 1.3.6.1.4.1.231.7.1.2.1.22.2.1.10
This trap will be send if the foreign master table changes because of new detected masters or a alraedy detected entry is lost.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpAlarms 1.3.6.1.4.1.231.7.1.2.1.22.2.2
OBJECT IDENTIFIER    

shePtpSynchronizationAlarm 1.3.6.1.4.1.231.7.1.2.1.22.2.2.1
This alarm will be activated if the ptp sync module is enabled and no external sync master was found or connection could not be established or was lost.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpIpHostInterfaceAlarm 1.3.6.1.4.1.231.7.1.2.1.22.2.2.2
This alarm will be activated: 1. If the ptp sync module is enabled and no valid IpHostInterface configuration could be detected. -> Configure a valid host interface via sheSystemIpHostTable. 2. The used interface was reconfigured during ongoing PTP session. -> The PTP module must be restarted.
Status: current Access: read-write
NOTIFICATION-TYPE    

shePtpConformance 1.3.6.1.4.1.231.7.1.2.1.22.100
OBJECT IDENTIFIER    

shePtpCompliances 1.3.6.1.4.1.231.7.1.2.1.22.100.1
OBJECT IDENTIFIER    

shePtpCompliance 1.3.6.1.4.1.231.7.1.2.1.22.100.1.1
The compliance statement for SNMP entities which implement the PTP MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

shePtpGroups 1.3.6.1.4.1.231.7.1.2.1.22.100.2
OBJECT IDENTIFIER    

shePtpGroup 1.3.6.1.4.1.231.7.1.2.1.22.100.2.1
Description.
Status: current Access: read-write
OBJECT-GROUP    

shePtpControlGroup 1.3.6.1.4.1.231.7.1.2.1.22.100.2.2
Description.
Status: current Access: read-write
OBJECT-GROUP    

shePtpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.22.100.2.3
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor